Bump revision up to 0.7.2

Fixes part of #52

.gitignore

@@ -7,9 +7,9 @@ build/
 .deps/
 .dirstamp
 .libs/
-test/libsdbus-c++_unittests
-test/libsdbus-c++_integrationtests
-test/run-test-on-device.sh
+tests/libsdbus-c++_unittests
+tests/libsdbus-c++_integrationtests
+tests/run-test-on-device.sh
 
 #eclipse
 .cproject

AUTHORS

@@ -1,5 +1,7 @@
-The library:
-  Stanislav Angelovic (stanislav.angelovic[at]kistler.com)
+sdbus-c++ library:
+  Stanislav Angelovic (https://github.com/sangelovic)
 
-Stub generator:
-  Lukas Durfina (lukas.durfina[at]kistler.com)
+Code generator:
+  Lukas Durfina (https://github.com/lukasdurfina)
+
+... and other contributors :)

CMakeLists.txt

@@ -2,34 +2,46 @@
 # PROJECT INFORMATION
 #-------------------------------
 
-cmake_minimum_required(VERSION 3.8)
+cmake_minimum_required(VERSION 3.6)
 
-project(sdbus-c++ VERSION 0.5.3 LANGUAGES C CXX)
+project(sdbus-c++ VERSION 0.7.2 LANGUAGES C CXX)
 
 include(GNUInstallDirs) # Installation directories for `install` command and pkgconfig file
 
 #-------------------------------
-# PERFORMING CHECKS
+# PERFORMING CHECKS & PREPARING THE DEPENDENCIES
 #-------------------------------
 
-find_package(PkgConfig REQUIRED)
-pkg_check_modules(SYSTEMD REQUIRED libsystemd>=236)
+option(BUILD_LIBSYSTEMD "Build libsystemd static library and incorporate it into libsdbus-c++" OFF)
+
+if(NOT BUILD_LIBSYSTEMD)
+    find_package(PkgConfig REQUIRED)
+    pkg_check_modules(SYSTEMD libsystemd>=236)
+    if(NOT SYSTEMD_FOUND)
+        message(FATAL_ERROR "libsystemd of version at least 236 is required, but was not found "
+                            "(you may turn BUILD_LIBSYSTEMD on for sdbus-c++ to try downloading "
+                            "and building libsystemd in as part of sdbus-c++ during configuration)")
+    endif()
+else()
+    # Build static libsystemd library as an external project
+    include(cmake/LibsystemdExternalProject.cmake)
+endif()
 
 #-------------------------------
 # SOURCE FILES CONFIGURATION
 #-------------------------------
 
-set(SDBUSCPP_SOURCE_DIR ${CMAKE_SOURCE_DIR}/src)
+set(SDBUSCPP_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/src)
 set(SDBUSCPP_INCLUDE_SUBDIR sdbus-c++)
-set(SDBUSCPP_INCLUDE_DIR ${CMAKE_SOURCE_DIR}/include/${SDBUSCPP_INCLUDE_SUBDIR})
+set(SDBUSCPP_INCLUDE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/include/${SDBUSCPP_INCLUDE_SUBDIR})
 
 set(SDBUSCPP_CPP_SRCS
     ${SDBUSCPP_SOURCE_DIR}/Connection.cpp
-    ${SDBUSCPP_SOURCE_DIR}/ConvenienceClasses.cpp
+    ${SDBUSCPP_SOURCE_DIR}/ConvenienceApiClasses.cpp
     ${SDBUSCPP_SOURCE_DIR}/Error.cpp
     ${SDBUSCPP_SOURCE_DIR}/Message.cpp
     ${SDBUSCPP_SOURCE_DIR}/Object.cpp
-    ${SDBUSCPP_SOURCE_DIR}/ObjectProxy.cpp
+    ${SDBUSCPP_SOURCE_DIR}/Proxy.cpp
     ${SDBUSCPP_SOURCE_DIR}/Types.cpp
     ${SDBUSCPP_SOURCE_DIR}/Flags.cpp
     ${SDBUSCPP_SOURCE_DIR}/VTableUtils.c
@@ -40,21 +52,22 @@ set(SDBUSCPP_HDR_SRCS
     ${SDBUSCPP_SOURCE_DIR}/IConnection.h
     ${SDBUSCPP_SOURCE_DIR}/MessageUtils.h
     ${SDBUSCPP_SOURCE_DIR}/Object.h
-    ${SDBUSCPP_SOURCE_DIR}/ObjectProxy.h
+    ${SDBUSCPP_SOURCE_DIR}/Proxy.h
     ${SDBUSCPP_SOURCE_DIR}/ScopeGuard.h
     ${SDBUSCPP_SOURCE_DIR}/VTableUtils.h
     ${SDBUSCPP_SOURCE_DIR}/SdBus.h
     ${SDBUSCPP_SOURCE_DIR}/ISdBus.h)
 
 set(SDBUSCPP_PUBLIC_HDRS
-    ${SDBUSCPP_INCLUDE_DIR}/ConvenienceClasses.h
-    ${SDBUSCPP_INCLUDE_DIR}/ConvenienceClasses.inl
+    ${SDBUSCPP_INCLUDE_DIR}/ConvenienceApiClasses.h
+    ${SDBUSCPP_INCLUDE_DIR}/ConvenienceApiClasses.inl
     ${SDBUSCPP_INCLUDE_DIR}/Error.h
     ${SDBUSCPP_INCLUDE_DIR}/IConnection.h
-    ${SDBUSCPP_INCLUDE_DIR}/Interfaces.h
-    ${SDBUSCPP_INCLUDE_DIR}/Introspection.h
+    ${SDBUSCPP_INCLUDE_DIR}/AdaptorInterfaces.h
+    ${SDBUSCPP_INCLUDE_DIR}/ProxyInterfaces.h
+    ${SDBUSCPP_INCLUDE_DIR}/StandardInterfaces.h
     ${SDBUSCPP_INCLUDE_DIR}/IObject.h
-    ${SDBUSCPP_INCLUDE_DIR}/IObjectProxy.h
+    ${SDBUSCPP_INCLUDE_DIR}/IProxy.h
     ${SDBUSCPP_INCLUDE_DIR}/Message.h
     ${SDBUSCPP_INCLUDE_DIR}/MethodResult.h
     ${SDBUSCPP_INCLUDE_DIR}/Types.h
@@ -68,9 +81,11 @@ set(SDBUSCPP_SRCS ${SDBUSCPP_CPP_SRCS} ${SDBUSCPP_HDR_SRCS} ${SDBUSCPP_PUBLIC_HD
 # GENERAL COMPILER CONFIGURATION
 #-------------------------------
 
-set(CMAKE_CXX_STANDARD 17)
-include_directories("${CMAKE_SOURCE_DIR}/include")
-include_directories("${CMAKE_SOURCE_DIR}/src")
+if(${CMAKE_VERSION} VERSION_LESS "3.8.0") 
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++17")
+else()
+    set(CMAKE_CXX_STANDARD 17) # Supported in CMake>=3.8
+endif()
 
 #----------------------------------
 # LIBRARY BUILD INFORMATION
@@ -81,27 +96,35 @@ set(SDBUSCPP_VERSION "${PROJECT_VERSION}")
 
 option(BUILD_SHARED_LIBS "Build shared libraries (.so) instead of static ones (.a)" ON)
 
-add_library(sdbus-cpp OBJECT ${SDBUSCPP_SRCS})
-target_include_directories(sdbus-cpp PUBLIC ${SYSTEMD_INCLUDE_DIRS})
-target_compile_definitions(sdbus-cpp PRIVATE BUILDLIB=1)
+# Having an object target allows unit tests to reuse already built sources without re-building
+add_library(sdbus-c++-objlib OBJECT ${SDBUSCPP_SRCS})
+target_compile_definitions(sdbus-c++-objlib PRIVATE BUILDLIB=1)
+target_include_directories(sdbus-c++-objlib PUBLIC $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include>
+                                                   $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+                                                   $<BUILD_INTERFACE:${SYSTEMD_INCLUDE_DIRS}>)
 if(BUILD_SHARED_LIBS)
-    set_target_properties(sdbus-cpp PROPERTIES POSITION_INDEPENDENT_CODE ON)
+    set_target_properties(sdbus-c++-objlib PROPERTIES POSITION_INDEPENDENT_CODE ON)
+endif()
+if(BUILD_LIBSYSTEMD)
+    add_dependencies(sdbus-c++-objlib LibsystemdBuildProject)
 endif()
 
-add_library(sdbus-c++ $<TARGET_OBJECTS:sdbus-cpp>)
+add_library(sdbus-c++ $<TARGET_OBJECTS:sdbus-c++-objlib>)
+target_include_directories(sdbus-c++ PUBLIC $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include>
+                                            $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>)
 set_target_properties(sdbus-c++
-    PROPERTIES
-    PUBLIC_HEADER "${SDBUSCPP_PUBLIC_HDRS}"
-    VERSION "${SDBUSCPP_VERSION}"
-    SOVERSION "${SDBUSCPP_VERSION_MAJOR}"
-    OUTPUT_NAME "sdbus-c++")
-target_link_libraries(sdbus-c++ ${SYSTEMD_LIBRARIES})
+                      PROPERTIES PUBLIC_HEADER "${SDBUSCPP_PUBLIC_HDRS}"
+                                 VERSION "${SDBUSCPP_VERSION}"
+                                 SOVERSION "${SDBUSCPP_VERSION_MAJOR}"
+                                 OUTPUT_NAME "sdbus-c++")
+target_link_libraries(sdbus-c++ PRIVATE ${SYSTEMD_LIBRARIES})
 
 #----------------------------------
 # INSTALLATION
 #----------------------------------
 
 install(TARGETS sdbus-c++
+        EXPORT sdbus-c++-targets
         RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT libraries
         LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT libraries
         ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT static_libraries
@@ -115,7 +138,7 @@ option(BUILD_TESTS "Build and install tests (default OFF)" OFF)
 
 if(BUILD_TESTS)
     enable_testing()
-    add_subdirectory("${CMAKE_SOURCE_DIR}/test")
+    add_subdirectory("${CMAKE_CURRENT_SOURCE_DIR}/tests")
 endif()
 
 #----------------------------------
@@ -125,17 +148,19 @@ endif()
 option(BUILD_CODE_GEN "Build and install interface stub code generator (default OFF)" OFF)
 
 if(BUILD_CODE_GEN)
-    add_subdirectory("${CMAKE_SOURCE_DIR}/stub-generator")
+    add_subdirectory("${CMAKE_CURRENT_SOURCE_DIR}/tools")
 endif()
 
 #----------------------------------
 # DOCUMENTATION
 #----------------------------------
 
-option(BUILD_DOC "Build doxygen documentation for sdbus-c++ API" ON)
+option(BUILD_DOC "Build documentation for sdbus-c++" ON)
 
 if(BUILD_DOC)
-    add_subdirectory("${CMAKE_SOURCE_DIR}/doc")
+    option(BUILD_DOXYGEN_DOC "Build doxygen documentation for sdbus-c++ API" OFF)
+    add_subdirectory("${CMAKE_CURRENT_SOURCE_DIR}/docs")
+    install(FILES README README.md NEWS COPYING ChangeLog AUTHORS DESTINATION ${CMAKE_INSTALL_DOCDIR})
 endif()
 
 #----------------------------------
@@ -143,15 +168,20 @@ endif()
 #----------------------------------
 
 include(CMakePackageConfigHelpers)
-set(SDBUSCPP_CONFIG_INSTALL_DIR ${CMAKE_INSTALL_LIBDIR}/cmake/sdbus-c++)
 
-configure_file(sdbus-c++-config.cmake.in sdbus-c++-config.cmake @ONLY)
-install(FILES ${CMAKE_BINARY_DIR}/sdbus-c++-config.cmake DESTINATION ${SDBUSCPP_CONFIG_INSTALL_DIR} COMPONENT dev)
+install(EXPORT sdbus-c++-targets
+        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/sdbus-c++
+        NAMESPACE SDBusCpp::
+        COMPONENT dev)
 
-write_basic_package_version_file(sdbus-c++-config-version.cmake
-        VERSION ${PROJECT_VERSION}
-        COMPATIBILITY AnyNewerVersion)
-install(FILES ${CMAKE_BINARY_DIR}/sdbus-c++-config-version.cmake DESTINATION ${SDBUSCPP_CONFIG_INSTALL_DIR} COMPONENT dev)
+configure_package_config_file(cmake/sdbus-c++-config.cmake.in cmake/sdbus-c++-config.cmake
+                              INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/sdbus-c++)
+write_basic_package_version_file(cmake/sdbus-c++-config-version.cmake COMPATIBILITY SameMajorVersion)
+install(FILES ${CMAKE_CURRENT_BINARY_DIR}/cmake/sdbus-c++-config.cmake
+              ${CMAKE_CURRENT_BINARY_DIR}/cmake/sdbus-c++-config-version.cmake
+        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/sdbus-c++
+        COMPONENT dev)
 
-configure_file(sdbus-c++.pc.in sdbus-c++.pc @ONLY)
-install(FILES ${CMAKE_BINARY_DIR}/sdbus-c++.pc DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig COMPONENT dev)
+configure_file(pkgconfig/sdbus-c++.pc.in pkgconfig/sdbus-c++.pc @ONLY)
+install(FILES ${CMAKE_CURRENT_BINARY_DIR}/pkgconfig/sdbus-c++.pc
+        DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig COMPONENT dev)

ChangeLog

@@ -54,7 +54,7 @@ v0.4.3
 
 v0.5.0
 - Redesign of the Connection model for scalability, thread-safety, simplicity and clarity
-- [[Breaking ABI change]] Introduce support asynchronous invocation of D-Bus methods on client-side
+- [[Breaking ABI change]] Introduce support for asynchronous invocation of D-Bus methods on client-side
 - Revise and extend sdbus-c++ tutorial
 - Introduce stress tests that involve a D-Bus server and client interacting in dense communication in both sync and async ways
 - Compilation error fixes for older gcc versions
@@ -73,3 +73,44 @@ v0.5.3
 - Extend stress tests with dynamic object and proxy creation and destruction from multiple threads
 - [[Breaking ABI change]] Add getConnection() method to IObject
 - A few minor fixes
+
+v0.6.0
+- This release comes with a number of API and ABI breaking changes (that hopefully lead to a more mature and stable API for near future):
+  - Some constructs have been renamed (see below for details), you'll have to adapt your sources whether you're using the basic or the convenience sdbus-c++ API.
+  - You'll also have to re-generate adaptor/proxy stubs with the new stub code generator if you're using them.
+  - And you'll have to take care of manual registeration/deregistration in the constructors/destructors of your final adaptor and proxy classes. See updated using sdbus-c++ tutorial.
+- Cleaning up some names (of class, methods, files):
+  * ConvenienceClasses.h/.inl/.cpp -> ConvenienceApiClasses.h/.inl/.cpp
+  * IObjectProxy class -> IProxy
+  * Interfaces class -> AdaptorInterfaces
+  * Interfaces.h -> split into AdaptorInterfaces.h and ProxyInterfaces.h
+  * createObjectProxy() method -> createProxy()
+- Add new unregister() virtual function to IObject and IProxy to allow for safe construction and destructions of D-Bus ojects and proxies hooked to live D-Bus connections.
+- Extend stress tests to allow testing safe initialization/deinitialization of objects and proxies
+- Fix gcc warnings
+- Use release v1.8.1 of googletest for tests
+
+v0.7.0
+- [[Breaking ABI change]] Added full support for ObjectManager, Properties and other standard D-Bus interfaces (Reordering virtual functions in interface classes)
+- sdbus-c++ now can automatically download, build and incorporate libsystemd static library, which makes things pretty easy in non-systemd environments
+- Minor changes in generated proxy/adaptor code:
+  * renamed interfaceName to INTERFACE_NAME to avoid potential naming clashes
+  * signal emitting methods now begin with "emit" prefix and capitalized first letter of signal name
+- sdbus-c++ file organization has been adjusted to comply to de-facto OSS project standards
+- Build system improvements -- moving towards more modern CMake
+- Using googletest from master branch instead of v1.8.1 which has THREADS_PTHREAD_ARG issue when cross-compiling
+- Documentation improvements
+- Minor changes (renamings) in the code generated by sdbus-c++-xml2cpp generator
+- Other minor fixes and internal design improvements
+
+v0.7.1
+- Fixed waiting in integration tests
+- Added object manager automatically in ObjectManager_adaptor constructor
+- Introduced support for unix fd type
+- Redesigned Message class hierarchy to be more idiomatic, clean and intent-revealing
+- Resolved a few clang-tidy warnings and suggestions
+- Extended the tutorial with info on standard D-Bus interfaces
+- Added protected non-virtual destructor in generated *_proxy/*_adaptor classes
+
+v0.7.2
+- Rewrite UnixFd implementation from plain UnixFd struct to full-ownership-semantics UnixFd class

INSTALL

@@ -1,7 +1,7 @@
 Building:
   $ mkdir build
   $ cd build
-  $ cmake .. ${CONFIGURE_FLAGS_IF_NECESSARY}
+  $ cmake .. -DCMAKE_BUILD_TYPE=Release ${OTHER_CONFIG_FLAGS}
   $ make
 
 Installing:

README.md

@@ -1,7 +1,11 @@
 sdbus-c++
 =========
 
-sdbus-c++ is a C++ API library for D-Bus IPC, based on sd-bus implementation.
+sdbus-c++ is a high-level C++ D-Bus library for Linux designed to provide expressive, easy-to-use API in modern C++. It adds another layer of abstraction on top of sd-bus, a nice, fresh C D-Bus implementation by systemd.
+
+sdbus-c++ has been written primarily as a replacement of dbus-c++, which currently suffers from a number of (unresolved) bugs, concurrency issues and inherent design complexities and limitations. sdbus-c++ has learned from dbus-c++ and has chosen a different path, a path of simple yet powerful design that is intuitive and friendly to the user and inherently free of those bugs.
+
+Even though sdbus-c++ uses sd-bus library, it is not necessarily constrained to systemd and can perfectly be used in non-systemd environments as well.
 
 Building and installing the library
 -----------------------------------
@@ -11,12 +15,12 @@ The library is built using CMake:
 ```bash
 $ mkdir build
 $ cd build
-$ cmake .. ${CONFIGURE_FLAGS_IF_NECESSARY}
+$ cmake .. -DCMAKE_BUILD_TYPE=Release ${OTHER_CONFIG_FLAGS}
 $ make
 $ sudo make install
 ```
 
-### CMake configuration flags
+### CMake configuration flags for sdbus-c++
 
 * `BUILD_CODE_GEN` [boolean]
 
@@ -24,7 +28,11 @@ $ sudo make install
 
 * `BUILD_DOC` [boolean]
 
-  Option for building Doxygen documentation of sdbus-c++ API. If `BUILD_DOC` is enabled, the documentation must still be built explicitly through `make doc`. Default value: `ON`. Use `-DBUILD_DOC=OFF` to disable searching for Doxygen and building Doxygen documentation of sdbus-c++ API.
+  Option for including sdbus-c++ documentation files and tutorials. Default value: `ON`. With this option turned on, you may also enable/disable the following option:
+
+    * `BUILD_DOXYGEN_DOC` [boolean]
+
+      Option for building Doxygen documentation of sdbus-c++ API. If enabled, the documentation must still be built explicitly through `make doc`. Default value: `OFF`. Use `-DBUILD_DOXYGEN_DOC=OFF` to disable searching for Doxygen and building Doxygen documentation of sdbus-c++ API.
 
 * `BUILD_TESTS` [boolean]
 
@@ -42,12 +50,25 @@ $ sudo make install
 
       Path where the test binaries shall get installed. Default value: `/opt/test/bin`.
 
+* `BUILD_LIBSYSTEMD` [boolean]
+
+  Option for building libsystemd dependency library automatically when sdbus-c++ is built, and making libsystemd an integral part of sdbus-c++ library. Default value: `OFF`. Might be very helpful in non-systemd environments where libsystemd shared library is unavailable (see [Solving libsystemd dependency](docs/using-sdbus-c++.md#solving-libsystemd-dependency) for more information). With this option turned on, you may also provide the following configuration flag:
+
+    * `LIBSYSTEMD_VERSION` [string]
+
+      Defines version of systemd to be downloaded, built and integrated into sdbus-c++. Default value: `242`.
+
+* `CMAKE_BUILD_TYPE` [string]
+
+  This is a CMake-builtin option. Set to `Release` to build sdbus-c++ for production use. Set to `Debug` if you want to help further develop (and debug) the library :)
+
 Dependencies
 ------------
 
-* `C++17` - the library uses C++17 `std::uncaught_exceptions()` feature. When building sdbus-c++ manually, make sure you use a compiler that supports that feature.
-* `libsystemd` - systemd library containing sd-bus implementation. Systemd v236 at least is needed for sdbus-c++ to compile.
-* `googletest` - google unit testing framework, only necessary when building tests, will be downloaded and built automatically
+* `C++17` - the library uses C++17 `std::uncaught_exceptions()` feature. When building sdbus-c++ manually, make sure you use a compiler that supports that feature (gcc >= 6, clang >= 3.7)
+* `libsystemd` - systemd library containing sd-bus implementation. This library is part of systemd. Systemd at least v236 is needed. (In case you have a non-systemd environment, don't worry, see [Solving libsystemd dependency](docs/using-sdbus-c++.md#solving-libsystemd-dependency) for more information.)
+* `googletest` - google unit testing framework, only necessary when building tests, will be downloaded and built automatically.
+* `pkgconfig` - required for sdbus-c++ to be able to find some dependency packages.
 
 Licensing
 ---------
@@ -57,10 +78,10 @@ The library is distributed under LGPLv2.1 license.
 References/documentation
 ------------------------
 
-* [D-Bus Specification](https://dbus.freedesktop.org/doc/dbus-specification.html)
+* [Using sdbus-c++](docs/using-sdbus-c++.md) - *the* main, comprehensive tutorial on sdbus-c++
+* [Systemd and dbus configuration](docs/systemd-dbus-config.md)
+* [D-Bus Specification](https://dbus.freedesktop.org/docs/dbus-specification.html)
 * [sd-bus Overview](http://0pointer.net/blog/the-new-sd-bus-api-of-systemd.html)
-* [Tutorial: Using sdbus-c++](doc/using-sdbus-c++.md)
-* [Systemd and dbus configuration](doc/systemd-dbus-config.md)
 
 Contributing
 ------------

cmake/LibsystemdExternalProject.cmake

@@ -0,0 +1,55 @@
+find_program(MESON meson)
+find_program(NINJA ninja)
+
+if((NOT MESON) OR (NOT NINJA))
+    message(FATAL_ERROR "Meson and Ninja are required to build libsystemd")
+endif()
+
+find_library(GLIBC_RT_LIBRARY rt)
+find_package(PkgConfig REQUIRED)
+pkg_check_modules(MOUNT mount)
+pkg_check_modules(CAP REQUIRED libcap)
+if (NOT CAP_FOUND)
+    find_library(CAP_LIBRARIES cap) # Compat with Ubuntu 14.04 which ships libcap w/o .pc file
+endif()
+
+set(LIBSYSTEMD_VERSION "242" CACHE STRING "libsystemd version (>=239) to build and incorporate into libsdbus-c++")
+
+if(NOT CMAKE_BUILD_TYPE)
+    set(LIBSYSTEMD_BUILD_TYPE "plain")
+elseif(CMAKE_BUILD_TYPE STREQUAL "Debug")
+    set(LIBSYSTEMD_BUILD_TYPE "debug")
+else()
+    set(LIBSYSTEMD_BUILD_TYPE "release")
+endif()
+
+if(LIBSYSTEMD_VERSION LESS "239")
+    message(FATAL_ERROR "Only libsystemd version >=239 can be built as static part of sdbus-c++")
+endif()
+if(LIBSYSTEMD_VERSION GREATER "240")
+    set(BUILD_VERSION_H ${NINJA} -C <BINARY_DIR> version.h)
+endif()
+
+include(ExternalProject)
+ExternalProject_Add(LibsystemdBuildProject
+                    PREFIX libsystemd-v${LIBSYSTEMD_VERSION}
+                    GIT_REPOSITORY    https://github.com/systemd/systemd.git
+                    GIT_TAG           v${LIBSYSTEMD_VERSION}
+                    GIT_SHALLOW       1
+                    UPDATE_COMMAND    ""
+                    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E remove <BINARY_DIR>/*
+                              COMMAND ${MESON} --buildtype=${LIBSYSTEMD_BUILD_TYPE} -Dstatic-libsystemd=pic <SOURCE_DIR> <BINARY_DIR>
+                    BUILD_COMMAND     ${BUILD_VERSION_H}
+                          COMMAND     ${NINJA} -C <BINARY_DIR> libsystemd.a
+                    BUILD_ALWAYS      1
+                    INSTALL_COMMAND   ""
+                    LOG_DOWNLOAD 1 LOG_UPDATE 1 LOG_CONFIGURE 1 LOG_BUILD 1)
+
+ExternalProject_Get_property(LibsystemdBuildProject SOURCE_DIR)
+set(SYSTEMD_INCLUDE_DIRS ${SOURCE_DIR}/src)
+ExternalProject_Get_property(LibsystemdBuildProject BINARY_DIR)
+set(SYSTEMD_LIBRARY_DIRS ${BINARY_DIR})
+
+add_library(Systemd::Libsystemd STATIC IMPORTED)
+set_target_properties(Systemd::Libsystemd PROPERTIES IMPORTED_LOCATION ${SYSTEMD_LIBRARY_DIRS}/libsystemd.a)
+set(SYSTEMD_LIBRARIES Systemd::Libsystemd ${CAP_LIBRARIES} ${GLIBC_RT_LIBRARY} ${MOUNT_LIBRARIES})

cmake/sdbus-c++-config.cmake.in

@@ -0,0 +1,11 @@
+@PACKAGE_INIT@
+
+include("${CMAKE_CURRENT_LIST_DIR}/@PROJECT_NAME@-targets.cmake")
+check_required_components("@PROJECT_NAME@")
+
+# This is here for backwards-compatibility. Please use more modern target-based approach.
+set(SDBUSCPP_VERSION "@SDBUSCPP_VERSION@")
+set(SDBUSCPP_FOUND "TRUE")
+set_and_check(SDBUSCPP_INCLUDE_DIRS "@CMAKE_INSTALL_FULL_INCLUDEDIR@")
+set_and_check(SDBUSCPP_LIBRARY_DIR "@CMAKE_INSTALL_FULL_LIBDIR@")
+set(SDBUSCPP_LIBRARIES sdbus-c++)

doc/CMakeLists.txt

@@ -1,17 +0,0 @@
-# Building doxygen documentation
-
-find_package(Doxygen)
-
-if(DOXYGEN_FOUND)
-    configure_file(${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile.in ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile @ONLY)
-
-    add_custom_target(doc
-        COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile
-        WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-        COMMENT "Generating API documentation with Doxygen"
-        VERBATIM)
-
-    install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/html DESTINATION ${CMAKE_INSTALL_DOCDIR})
-else()
-    message(WARNING "Documentation enabled, but Doxygen cannot be found")
-endif()

docs/CMakeLists.txt

@@ -0,0 +1,25 @@
+# Building doxygen documentation
+
+find_package(Doxygen)
+
+if(BUILD_DOXYGEN_DOC)
+    if(DOXYGEN_FOUND)
+        configure_file(${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile.in ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile @ONLY)
+
+        add_custom_target(doc
+            COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile
+            WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+            COMMENT "Generating API documentation with Doxygen"
+            VERBATIM)
+
+        install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/html DESTINATION ${CMAKE_INSTALL_DOCDIR} OPTIONAL)
+    else()
+        message(WARNING "Documentation enabled, but Doxygen cannot be found")
+    endif()
+endif()
+
+install(FILES sdbus-c++-class-diagram.png
+              sdbus-c++-class-diagram.uml
+              systemd-dbus-config.md
+              using-sdbus-c++.md
+        DESTINATION ${CMAKE_INSTALL_DOCDIR})

docs/sdbus-c++-class-diagram.uml

@@ -12,9 +12,10 @@ interface IObject {
   +emitSignal()
 }
 
-interface IObjectProxy {
+interface IProxy {
   +callMethod()
   +subscribeToSignal()
+  +get/setProperty()
 }
 
 class Message {
@@ -39,21 +40,24 @@ class Object {
   string objectPath
   List interfaces
   List methods
+  List signals
+  List properties
 }
 
-class ObjectProxy {
+class Proxy {
   IConnectionInternal& connection
   string destination
   string objectPath
+  List signalHandlers
 }
 
 IConnection <|-- Connection
 IConnectionInternal  <|- Connection
 IObject <|-- Object
-IObjectProxy <|-- ObjectProxy
+IProxy <|-- Proxy
 Connection <-- Object : "use"
-Connection <-- ObjectProxy : "use"
+Connection <-- Proxy : "use"
 Message <.. Object : "send/receive"
-Message <.. ObjectProxy : "send/receive"
+Message <.. Proxy : "send/receive"
 
 @enduml

docs/using-sdbus-c++.md

@@ -5,46 +5,107 @@ Using sdbus-c++ library
 
 1. [Introduction](#introduction)
 2. [Integrating sdbus-c++ into your project](#integrating-sdbus-c-into-your-project)
-3. [Header files and namespaces](#header-files-and-namespaces)
-4. [Error signalling and propagation](#error-signalling-and-propagation)
-5. [Design of sdbus-c++](#design-of-sdbus-c)
-6. [Multiple layers of sdbus-c++ API](#multiple-layers-of-sdbus-c-api)
-7. [An example: Number concatenator](#an-example-number-concatenator)
-8. [Implementing the Concatenator example using basic sdbus-c++ API layer](#implementing-the-concatenator-example-using-basic-sdbus-c-api-layer)
-9. [Implementing the Concatenator example using convenience sdbus-c++ API layer](#implementing-the-concatenator-example-using-convenience-sdbus-c-api-layer)
-10. [Implementing the Concatenator example using sdbus-c++-generated stubs](#implementing-the-concatenator-example-using-sdbus-c-generated-stubs)
-11. [Asynchronous server-side methods](#asynchronous-server-side-methods)
-12. [Asynchronous client-side methods](#asynchronous-client-side-methods)
-13. [Using D-Bus properties](#using-d-bus-properties)
-14. [Conclusion](#conclusion)
+3. [Solving libsystemd dependency](#solving-libsystemd-dependency)
+4. [Distributing sdbus-c++](#distributing-sdbus-c)
+5. [Header files and namespaces](#header-files-and-namespaces)
+6. [Error signalling and propagation](#error-signalling-and-propagation)
+7. [Design of sdbus-c++](#design-of-sdbus-c)
+8. [Multiple layers of sdbus-c++ API](#multiple-layers-of-sdbus-c-api)
+9. [An example: Number concatenator](#an-example-number-concatenator)
+10. [Implementing the Concatenator example using basic sdbus-c++ API layer](#implementing-the-concatenator-example-using-basic-sdbus-c-api-layer)
+11. [Implementing the Concatenator example using convenience sdbus-c++ API layer](#implementing-the-concatenator-example-using-convenience-sdbus-c-api-layer)
+12. [Implementing the Concatenator example using sdbus-c++-generated stubs](#implementing-the-concatenator-example-using-sdbus-c-generated-stubs)
+13. [Asynchronous server-side methods](#asynchronous-server-side-methods)
+14. [Asynchronous client-side methods](#asynchronous-client-side-methods)
+15. [Using D-Bus properties](#using-d-bus-properties)
+16. [Standard D-Bus interfaces](#standard-d-bus-interfaces)
+17. [Conclusion](#conclusion)
 
 Introduction
 ------------
 
-sdbus-c++ is a C++ wrapper library built on top of [sd-bus](http://0pointer.net/blog/the-new-sd-bus-api-of-systemd.html), a lightweight D-Bus client library implemented within systemd project. It provides D-Bus functionality on a higher level of abstraction, trying to employ C++ type system to shift as much work as possible from the developer to the compiler.
+sdbus-c++ is a C++ D-Bus library built on top of [sd-bus](http://0pointer.net/blog/the-new-sd-bus-api-of-systemd.html), a lightweight D-Bus client library implemented within [systemd](https://github.com/systemd/systemd) project. It provides D-Bus functionality on a higher level of abstraction, trying to employ C++ type system to shift as much work as possible from the developer to the compiler.
 
 sdbus-c++ does not cover the entire sd-bus API, but provides tools for implementing the most common functionality - RPC method calls, signals and properties. There is room for additions and improvements, as needed and when needed.
 
 Integrating sdbus-c++ into your project
 ---------------------------------------
 
-The library build system is based on CMake. The library provides a config file, so integrating it into your CMake project is rather straight-forward:
+The library build system is based on CMake. The library provides a config and an export file, so integrating it into your CMake project is sooo simple:
 
-```bash
+```cmake
+# First, find sdbus-c++
 find_package(sdbus-c++ REQUIRED)
+
+# Use the sdbus-c++ target in SDBusCpp namespace
+add_executable(exe exe.cpp)
+target_link_libraries(exe PRIVATE SDBusCpp::sdbus-c++)
 ```
 
 The library also supports `pkg-config`, so it easily be integrated into e.g. an Autotools project:
 
 ```bash
-PKG_CHECK_MODULES(SDBUSCPP, [sdbus-c++ >= 0.4],,
-    AC_MSG_ERROR([You need the sdbus-c++ library (version 0.4 or newer)]
+PKG_CHECK_MODULES(SDBUSCPP, [sdbus-c++ >= 0.6],,
+    AC_MSG_ERROR([You need the sdbus-c++ library (version 0.6 or newer)]
     [http://www.kistler.com/])
 )
 ```
 
 Note: sdbus-c++ library depends on C++17, since it uses C++17 `std::uncaught_exceptions()` feature. When building sdbus-c++ manually, make sure you use a compiler that supports that feature. To use the library, make sure you have a C++ standard library that supports the feature. The feature is supported by e.g. gcc >= 6, and clang >= 3.7.
 
+Solving libsystemd dependency
+-----------------------------
+
+sdbus-c++ depends on libsystemd, a C library that is part of [systemd](https://github.com/systemd/systemd) and that contains underlying sd-bus implementation.
+
+Minimum required libsystemd shared library version is 0.20.0 (which corresponds to minimum systemd version 236).
+
+If your target Linux distribution is already based on systemd ecosystem of version 236 and higher, then there is no additional effort, just make sure you have corresponding systemd header files available (provided by `libsystemd-dev` package on Debian/Ubuntu, for example), and you may go on building sdbus-c++ seamlessly.
+
+However, sdbus-c++ can perfectly be used in non-systemd environments as well. There are two ways to approach this:
+
+### Building and distributing libsystemd as a shared library yourself
+
+Fortunately, libsystemd is rather self-contained and can be built and used independently of the rest of systemd ecosystem. To build libsystemd shared library for sdbus-c++:
+
+```shell
+$ git clone https://github.com/systemd/systemd
+$ cd systemd
+$ git checkout v242  # or any other recent stable version
+$ mkdir build
+$ cd build
+$ meson --buildtype=release .. # solve systemd dependencies if any pop up, e.g. libmount-dev, libcap, librt...
+$ ninja version.h # building version.h target is only necessary in systemd version >= 241
+$ ninja libsystemd.so.0.26.0  # or another version number depending which systemd version you have
+# finally, manually install the library, header files and libsystemd.pc pkgconfig file
+```
+
+### Building and distributing libsystemd as part of sdbus-c++
+
+sdbus-c++ provides `BUILD_LIBSYSTEMD` configuration option. When turned on, sdbus-c++ will automatically download and build libsystemd as a static library and make it an opaque part of sdbus-c++ shared library for you. This is the most convenient and effective approach to build, distribute and use sdbus-c++ as a self-contained, systemd-independent library in non-systemd enviroments. Just make sure your build machine has all dependencies needed by libsystemd build process. That includes `meson`, `ninja`, `git` programs and mainly libraries and library headers for `libmount`, `libcap` and `librt` (part of glibc). Also when distributing, make sure these dependency libraries are installed on the production machine.
+
+You may additionally set the `LIBSYSTEMD_VERSION` configuration flag to fine-tune the version of systemd to be taken in. (The default value is 242).
+
+Distributing sdbus-c++
+----------------------
+
+sdbus-c++ recipes for Yocto are available. Contributors willing to help with bringing sdbus-c++ to popular package systems are welcome.
+
+### Yocto
+
+There are sdbus-c++ recipes for already released Yocto versions (for versions Sumo and newer) available in the meta-oe layer of meta-openembedded fork at Kistler-Group:
+
+  * [sdbus-c++ recipes for Yocto Sumo](https://github.com/Kistler-Group/meta-openembedded/tree/sumo-with-sdbus-c%2B%2B/meta-oe/recipes-core/sdbus-c%2B%2B)
+  * [sdbus-c++ recipes for Yocto Thud](https://github.com/Kistler-Group/meta-openembedded/tree/thud-with-sdbus-c%2B%2B/meta-oe/recipes-core/sdbus-c%2B%2B)
+  * [sdbus-c++ recipes for Yocto Warrior](https://github.com/Kistler-Group/meta-openembedded/tree/warrior-with-sdbus-c%2B%2B/meta-oe/recipes-core/sdbus-c%2B%2B)
+
+Also, there is currently a pull request pending that pushes there recipes upstream -- to the OpenEmbedded project, so they will be officially available for the upcoming Yocto release.
+
+There are two recipes:
+
+  * One for sdbus-c++ itself. It detects whether systemd feature is turned on in the poky linux configuration. If so, it simply depends on systemd and makes use of libsystemd shared library available in the target system. Otherwise it automatically downloads and builds libsystemd static library and makes it an opaque part of sdbus-c++ shared library. The recipe also supports ptest.
+  * One for sdbus-c++ native tools, namely sdbus-c++ code generator to generate C++ adaptor and proxy binding classes.
+
 Header files and namespaces
 ---------------------------
 
@@ -52,7 +113,7 @@ All sdbus-c++ header files reside in the `sdbus-c++` subdirectory within the sta
 
 ```cpp
 #include <sdbus-c++/IConnection.h>
-#include <sdbus-c++/IObjectProxy.h>
+#include <sdbus-c++/IProxy.h>
 ```
 
 or just include the global header file that pulls in everything:
@@ -87,25 +148,29 @@ The following diagram illustrates the major entities in sdbus-c++.
   * registering (possibly multiple) interfaces and methods, signals, properties on those interfaces,
   * emitting signals.
 
-`IObjectProxy` represents the concept of the proxy, which is a view of the `Object` from the client side. Its responsibilities are:
+`IProxy` represents the concept of the proxy, which is a view of the `Object` from the client side. Its responsibilities are:
 
   * invoking remote methods of the corresponding object, in both synchronous and asynchronous way,
   * registering handlers for signals,
 
-`Message` class represents a message, which is the fundamental DBus concept. There are three distinctive types of message that derive from the `Message` class:
+`Message` class represents a message, which is the fundamental DBus concept. There are three distinctive types of message that are derived from the `Message` class:
 
   * `MethodCall` (with serialized parameters),
+  * `AsyncMethodCall` (with serialized parameters),
   * `MethodReply` (with serialized return values),
-  * or a `Signal` (with serialized parameters).
+  * `Signal` (with serialized parameters),
+  * `PropertySetCall` (with serialized parameter value to be set)
+  * `PropertyGetReply` (where property value shall be stored)
+  * `PlainMessage` (for internal purposes).
 
 ### Thread safety in sdbus-c++
 
 sdbus-c++ is thread-aware by design. But, in general, it's not thread-safe. At least not in all places. There are situations where sdbus-c++ provides and guarantees API-level thread safety by design. It is safe to do these operations from multiple threads at the same time:
 
-  * Making and destroying `Object`s and `ObjectProxy`s, even on a shared connection that is already running an event loop. Under *making* here is meant a complete atomic sequence of construction, registration of method/signal/property callbacks and export of the `Object`/`ObjectProxy` so it is ready to issue/receive messages. This sequence must be done in one thread.
+  * Making and destroying `Object`s and `Proxy`s, even on a shared connection that is already running an event loop. Under *making* here is meant a complete atomic sequence of construction, registration of method/signal/property callbacks and export of the `Object`/`Proxy` so it is ready to issue/receive messages. This sequence must be done in one thread.
   * Creating and sending asynchronous method replies on an `Object` instance.
   * Creating and emitting signals on an `Object` instance.
-  * Creating and sending method calls (both synchronously and asynchronously) on an `ObjectProxy` instance. (But it's generally better that our threads use their own exclusive instances of object proxy, to minimize shared state and contention.)
+  * Creating and sending method calls (both synchronously and asynchronously) on an `Proxy` instance. (But it's generally better that our threads use their own exclusive instances of proxy, to minimize shared state and contention.)
 
 Multiple layers of sdbus-c++ API
 -------------------------------
@@ -115,7 +180,7 @@ sdbus-c++ API comes in two layers:
   * [the basic layer](#implementing-the-concatenator-example-using-basic-sdbus-c-api-layer), which is a simple wrapper layer on top of sd-bus, using mechanisms that are native to C++ (e.g. serialization/deserialization of data from messages),
   * [the convenience layer](#implementing-the-concatenator-example-using-convenience-sdbus-c-api-layer), building on top of the basic layer, which aims at alleviating users from unnecessary details and enables them to write shorter, safer, and more expressive code.
 
-sdbus-c++ also ships with a stub generator tool that converts D-Bus IDL in XML format into stub code for the adaptor as well as proxy part. Hierarchically, these stubs provide yet another layer of convenience (the "stubs layer"), making it possible for D-Bus RPC calls to completely look like native C++ calls on a local object.
+sdbus-c++ also ships with a stub generator tool that converts D-Bus IDL in XML format into stub code for the adaptor as well as the proxy part. Hierarchically, these stubs provide yet another layer of convenience (the "stubs layer"), making it possible for D-Bus RPC calls to completely look like native C++ calls on a local object.
 
 An example: Number concatenator
 -------------------------------
@@ -130,7 +195,7 @@ In the following sections, we will elaborate on the ways of implementing such an
 Implementing the Concatenator example using basic sdbus-c++ API layer
 ---------------------------------------------------------------------
 
-In the basic API layer, we already have abstractions for D-Bus connections, objects and object proxies, with which we can interact via their interface classes (`IConnection`, `IObject`, `IObjectProxy`), but, analogously to the underlying sd-bus C library, we still work on the level of D-Bus messages. We need to
+In the basic API layer, we already have abstractions for D-Bus connections, objects and object proxies, with which we can interact via their interface classes (`IConnection`, `IObject`, `IProxy`), but, analogously to the underlying sd-bus C library, we still work on the level of D-Bus messages. We need to
 
   * create them,
   * serialize/deserialize arguments to/from them (thanks to many overloads of C++ insertion/extraction operators, this is very simple),
@@ -235,7 +300,7 @@ int main(int argc, char *argv[])
     // will create its own connection automatically, and it will be system bus connection.
     const char* destinationName = "org.sdbuscpp.concatenator";
     const char* objectPath = "/org/sdbuscpp/concatenator";
-    auto concatenatorProxy = sdbus::createObjectProxy(destinationName, objectPath);
+    auto concatenatorProxy = sdbus::createProxy(destinationName, objectPath);
     
     // Let's subscribe for the 'concatenated' signals
     const char* interfaceName = "org.sdbuscpp.Concatenator";
@@ -277,7 +342,7 @@ int main(int argc, char *argv[])
 }
 ```
 
-In simple cases, we don't need to create D-Bus connection explicitly for our proxies. Unless a connection is provided to an object proxy explicitly via factory parameter, the proxy will create a connection of his own, and it will be a system bus connection. This is the case in the example above. (This approach is not scalable and resource-saving if we have plenty of proxies; see section [Working with D-Bus connections](#working-with-d-bus-connections-in-sdbus-c) for elaboration.) So, in the example, we create a proxy for object `/org/sdbuscpp/concatenator` publicly available at bus `org.sdbuscpp.concatenator`. We register signal handlers, if any, and finish the registration, making the object proxy ready for use.
+In simple cases, we don't need to create D-Bus connection explicitly for our proxies. Unless a connection is provided to a proxy object explicitly via factory parameter, the proxy will create a connection of his own, and it will be a system bus connection. This is the case in the example above. (This approach is not scalable and resource-saving if we have plenty of proxies; see section [Working with D-Bus connections](#working-with-d-bus-connections-in-sdbus-c) for elaboration.) So, in the example, we create a proxy for object `/org/sdbuscpp/concatenator` publicly available at bus `org.sdbuscpp.concatenator`. We register signal handlers, if any, and finish the registration, making the proxy ready for use.
 
 The callback for a D-Bus signal handler on this level is any callable of signature `void(sdbus::Signal& signal)`. The one and only parameter `signal` is the incoming signal message. We need to deserialize arguments from it, and then we can do our business logic with it.
 
@@ -291,11 +356,11 @@ The design of D-Bus connections in sdbus-c++ allows for certain flexibility and
 
 How shall we use connections in relation to D-Bus objects and object proxies?
 
-A D-Bus connection is represented by a `Connection` instance. Each connection needs an event loop being run upon it. So it needs a thread handling the event loop. This thread serves all incoming and outgoing messages and all communication towards D-Bus daemon.
+A D-Bus connection is represented by a `IConnection` instance. Each connection needs an event loop being run upon it. So it needs a thread handling the event loop. This thread serves all incoming and outgoing messages and all communication towards D-Bus daemon.
 
 One process can have multiple D-Bus connections, with assigned unique bus names or without, as long as those with assigned bus names do not share a common bus name.
 
-A D-Bus connection can be created for and used exclusively by one D-Bus object (represented by one `Object` instance) or D-Bus object proxy (represented by one `ObjectProxy` instance), but can very well be used by and shared across multiple objects, multiple proxies or even both multiple objects and proxies at the same time. When shared, one must bear in mind that the access to the connection is mutually exclusive and is serialized. This means, for example, that if an object's callback is going to be invoked for an incoming remote method call and in another thread we use a proxy to call remote method in another process, the threads are contending and only one can go on while the other must wait and can only proceed after the first one has finished, because both are using a shared resource -- the connection.
+A D-Bus connection can be created for and used exclusively by one D-Bus object (represented by one `IObject` instance) or one D-Bus proxy (represented by one `IProxy` instance), but can very well be used by and shared across multiple objects, multiple proxies or even both multiple objects and proxies at the same time. When shared, one must bear in mind that the access to the connection is mutually exclusive and is serialized. This means, for example, that if an object's callback is going to be invoked for an incoming remote method call and in another thread we use a proxy to call remote method in another process, the threads are contending and only one can go on while the other must wait and can only proceed after the first one has finished, because both are using a shared resource -- the connection.
 
 The former case (1:1) is one extreme; it's usually simple, has zero resource contention, but hurts scalability (for example, 50 proxies in our program need 50 D-Bus connections and 50 event loop threads upon them). The latter case (1:N) is the other extreme -- all D-Bus objects and proxies share one single connection. This is the most scalable solution (since, for example, 5 or 200 objects/proxies use always one single connection), but may increase contention and hurt concurrency (since only one of all those objects/proxies can work with the connection at a time). And then there are limitless options between the two (for example, we can use one connection for all objects, and another connection for all proxies in our service...). sdbus-c++ gives its users freedom to choose whatever approach is more suitable to them in their application at fine granularity.
 
@@ -303,13 +368,13 @@ How can we use connections from the server and the client perspective?
 
 * On the *server* side, we generally need to create D-Bus objects and publish their APIs. For that we first need a connection with a unique bus name. We need to create the D-Bus connection manually ourselves, request bus name on it, and manually launch its event loop (in a blocking way, through `enterProcessingLoop()`, or non-blocking async way, through `enterProcessingLoopAsync()`). At any time before or after running the event loop on the connection, we can create and "hook", as well as remove, objects and proxies upon that connection.
 
-* On the *client* side, for our D-Bus object proxies, we have more options (corresponding to three overloads of the `createObjectProxy()` factory):
+* On the *client* side, for our D-Bus object proxies, we have more options (corresponding to three overloads of the `createProxy()` factory):
 
     * We don't bother about any connection when creating a proxy. For each proxy instance sdbus-c++ also creates an internal connection instance to be used just by this proxy, and it will be a *system bus* connection. Additionally, an event loop thread for that connection is created and run internally.
 
       This hurts scalability (see discussion above), but our code is simpler, and since each proxy has its own connection, there is zero contention.
 
-    * We create a connection explicitly by ourselves and `std::move` it to the object proxy factory. The proxy becomes an owner of this connection, and will run the event loop on that connection. This is the same as in the above bullet point, but with a flexibility that we can choose the bus type (system, session bus).
+    * We create a connection explicitly by ourselves and `std::move` it to the proxy object factory. The proxy becomes an owner of this connection, and will run the event loop on that connection. This is the same as in the above bullet point, but with a flexibility that we can choose the bus type (system, session bus).
 
     * We are always full owners of the connection. We create the connection, and a proxy only takes and keeps a reference to it. We take care of the event loop upon that connection (and we must ensure the connection exists as long as all its users exist).
 
@@ -402,7 +467,7 @@ int main(int argc, char *argv[])
     // Create proxy object for the concatenator object on the server side
     const char* destinationName = "org.sdbuscpp.concatenator";
     const char* objectPath = "/org/sdbuscpp/concatenator";
-    auto concatenatorProxy = sdbus::createObjectProxy(destinationName, objectPath);
+    auto concatenatorProxy = sdbus::createProxy(destinationName, objectPath);
     
     // Let's subscribe for the 'concatenated' signals
     const char* interfaceName = "org.sdbuscpp.Concatenator";
@@ -446,15 +511,15 @@ sdbus-c++ users shall prefer the convenience API to the lower level, basic API.
 Implementing the Concatenator example using sdbus-c++-generated stubs
 ---------------------------------------------------------------------
 
-sdbus-c++ ships with the native stub generator tool called `sdbus-c++-xml2cpp`. The tool is very similar to `dbusxx-xml2cpp` tool that comes from dbus-c++ project.
+sdbus-c++ ships with the native stub generator tool called `sdbus-c++-xml2cpp`. The tool is very similar to `dbusxx-xml2cpp` tool that comes with the dbus-c++ project.
 
-The generator tool takes D-Bus XML IDL description of D-Bus interfaces on its input, and can be instructed to generate one or both of these: an adaptor header file for use at server side, and a proxy header file for use at client side. Like this:
+The generator tool takes D-Bus XML IDL description of D-Bus interfaces on its input, and can be instructed to generate one or both of these: an adaptor header file for use on the server side, and a proxy header file for use on the client side. Like this:
 
 ```bash
 sdbus-c++-xml2cpp database-bindings.xml --adaptor=database-server-glue.h --proxy=database-client-glue.h
 ```
 
-The adaptor header file contains classes that can be used to implement described interfaces. The proxy header file contains classes that can be used to make calls to remote objects.
+The adaptor header file contains classes that can be used to implement interfaces described in the IDL (these classes represent object interfaces). The proxy header file contains classes that can be used to make calls to remote objects (these classes represent remote object interfaces).
 
 ### XML description of the Concatenator interface
 
@@ -481,7 +546,7 @@ After running this through the stubs generator, we get the stub code that is des
 
 ### concatenator-server-glue.h
 
-There is specific class for each interface in the XML IDL file. The class is de facto an interface which shall be implemented by inheriting from it. The class' constructor takes care of registering all methods, signals and properties. For each D-Bus method there is a pure virtual member function. These pure virtual functions must be implemented in the child class. For each signal, there is a public function member that emits this signal.
+For each interface in the XML IDL file the generator creates one class that represents it. The class is de facto an interface which shall be implemented by the class inheriting it. The class' constructor takes care of registering all methods, signals and properties. For each D-Bus method there is a pure virtual member function. These pure virtual functions must be implemented in the child class. For each signal, there is a public function member that emits this signal.
 
 ```cpp
 /*
@@ -501,20 +566,22 @@ namespace sdbuscpp {
 class Concatenator_adaptor
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.Concatenator";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.Concatenator";
 
 protected:
     Concatenator_adaptor(sdbus::IObject& object)
         : object_(object)
     {
-        object_.registerMethod("concatenate").onInterface(interfaceName).implementedAs([this](const std::vector<int32_t>& numbers, const std::string& separator){ return this->concatenate(numbers, separator); });
-        object_.registerSignal("concatenated").onInterface(interfaceName).withParameters<std::string>();
+        object_.registerMethod("concatenate").onInterface(INTERFACE_NAME).implementedAs([this](const std::vector<int32_t>& numbers, const std::string& separator){ return this->concatenate(numbers, separator); });
+        object_.registerSignal("concatenated").onInterface(INTERFACE_NAME).withParameters<std::string>();
     }
 
+    ~Concatenator_adaptor() = default;
+
 public:
-    void concatenated(const std::string& concatenatedString)
+    void emitConcatenated(const std::string& concatenatedString)
     {
-        object_.emitSignal("concatenated").onInterface(interfaceName).withArguments(concatenatedString);
+        object_.emitSignal("concatenated").onInterface(INTERFACE_NAME).withArguments(concatenatedString);
     }
 
 private:
@@ -531,7 +598,7 @@ private:
 
 ### concatenator-client-glue.h
 
-Analogously to the adaptor classes described above, there is specific class for each interface in the XML IDL file. The class is de facto a proxy to the concrete interface of a remote object. For each D-Bus signal there is a pure virtual member function whose body must be provided in a child class. For each method, there is a public function member that calls the method remotely.
+Analogously to the adaptor classes described above, there is one class generated for one interface in the XML IDL file. The class is de facto a proxy to the concrete single interface of a remote object. For each D-Bus signal there is a pure virtual member function whose body must be provided in a child class. For each method, there is a public function member that calls the method remotely.
 
 ```cpp
 /*
@@ -551,27 +618,29 @@ namespace sdbuscpp {
 class Concatenator_proxy
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.Concatenator";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.Concatenator";
 
 protected:
-    Concatenator_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
+    Concatenator_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
     {
-        object_.uponSignal("concatenated").onInterface(interfaceName).call([this](const std::string& concatenatedString){ this->onConcatenated(concatenatedString); });
+        proxy_.uponSignal("concatenated").onInterface(INTERFACE_NAME).call([this](const std::string& concatenatedString){ this->onConcatenated(concatenatedString); });
     }
 
+    ~Concatenator_proxy() = default;
+
     virtual void onConcatenated(const std::string& concatenatedString) = 0;
 
 public:
     std::string concatenate(const std::vector<int32_t>& numbers, const std::string& separator)
     {
         std::string result;
-        object_.callMethod("concatenate").onInterface(interfaceName).withArguments(numbers, separator).storeResultsTo(result);
+        proxy_.callMethod("concatenate").onInterface(INTERFACE_NAME).withArguments(numbers, separator).storeResultsTo(result);
         return result;
     }
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& proxy_;
 };
 
 }} // namespaces
@@ -581,18 +650,34 @@ private:
 
 ### Providing server implementation based on generated adaptors
 
-To implement a D-Bus object that implements all its D-Bus interfaces, we shall create a class representing the object that inherits from all corresponding `*_adaptor` classes and implements all pure virtual member functions. Specifically, the object class shall inherit from the `Interfaces` template class, the template arguments of which are individual adaptor classes. The `Interfaces` is just a convenience class that hides a few boiler-plate details. For example, in its constructor, it creates an `Object` instance, it takes care of proper initialization of all adaptor superclasses, and exports the object finally.
+To implement a D-Bus object that implements all its D-Bus interfaces, we now need to create a class representing the D-Bus object. This class must inherit from all corresponding `*_adaptor` classes (a-ka object interfaces, because these classes are as-if interfaces) and implement all pure virtual member functions.
+
+How do we do that technically? Simply, our object class just needs to inherit from `AdaptorInterfaces` variadic template class. We fill its template arguments with a list of all generated interface classes. The `AdaptorInterfaces` is a convenience class that hides a few boiler-plate details. For example, in its constructor, it creates an `Object` instance, and it takes care of proper initialization of all adaptor superclasses.
+
+In our object class we need to:
+
+  * Give an implementation to the D-Bus object's methods by overriding corresponding virtual functions,
+  * call `registerAdaptor()` in the constructor, which makes the adaptor (the D-Bus object underneath it) available for remote calls,
+  * call `unregisterAdaptor()`, which, conversely, unregisters the adaptor from the bus.
+
+Calling `registerAdaptor()` and `unregisterAdaptor()` was not necessary in previous sdbus-c++ versions, as it was handled by the parent class. This was convenient, but suffered from a potential pure virtual function call issue. Only the class that implements virtual functions can do the registration, hence this slight inconvenience on user's shoulders.
 
 ```cpp
 #include <sdbus-c++/sdbus-c++.h>
 #include "concatenator-server-glue.h"
 
-class Concatenator : public sdbus::Interfaces<org::sdbuscpp::Concatenator_adaptor /*, more adaptor classes if there are more interfaces*/>
+class Concatenator : public sdbus::AdaptorInterfaces<org::sdbuscpp::Concatenator_adaptor /*, more adaptor classes if there are more interfaces*/>
 {
 public:
     Concatenator(sdbus::IConnection& connection, std::string objectPath)
-        : sdbus::Interfaces<org::sdbuscpp::Concatenator_adaptor>(connection, std::move(objectPath))
+        : sdbus::AdaptorInterfaces(connection, std::move(objectPath))
     {
+        registerAdaptor();
+    }
+
+    ~Concatenator()
+    {
+        unregisterAdaptor();
     }
 
 protected:
@@ -610,7 +695,7 @@ protected:
         }
         
         // Emit the 'concatenated' signal with the resulting string
-        concatenated(result);
+        emitConcatenated(result);
         
         // Return the resulting string
         return result;
@@ -638,11 +723,21 @@ int main(int argc, char *argv[])
 }
 ```
 
-It's that simple :)
+Now we have a service with a unique bus name and a D-Bus object available on it. Let's write a client.
 
 ### Providing client implementation based on generated proxies
 
-To implement a proxy for a remote D-Bus object, we shall create a class representing the object proxy that inherits from all corresponding `*_proxy` classes and -- if applicable -- implements all pure virtual member functions. Specifically, the object proxy class shall inherit from the `ProxyInterfaces` template class. As its template arguments we shall provide all proxy classes. The `ProxyInterfaces` is just a convenience class that hides a few boiler-plate details. For example, in its constructor, it creates an `ObjectProxy` instance, and it takes care of proper initialization of all proxy superclasses.
+To implement a proxy for a remote D-Bus object, we shall create a class representing the proxy object. This class must inherit from all corresponding `*_proxy` classes (a-ka remote object interfaces, because these classes are as-if interfaces) and -- if applicable -- implement all pure virtual member functions.
+
+How do we do that technically? Simply, our proxy class just needs to inherit from `ProxyInterfaces` variadic template class. We fill its template arguments with a list of all generated interface classes. The `ProxyInterfaces` is a convenience class that hides a few boiler-plate details. For example, in its constructor, it can create a `Proxy` instance for us, and it takes care of proper initialization of all generated interface superclasses.
+
+In our proxy class we need to:
+
+  * Give an implementation to signal handlers and asynchronous method reply handlers (if any) by overriding corresponding virtual functions,
+  * call `registerProxy()` in the constructor, which makes the proxy (the D-Bus proxy object underneath it) ready to receive signals and async call replies,
+  * call `unregisterProxy()`, which, conversely, unregisters the proxy from the bus.
+
+Calling `registerProxy()` and `unregisterProxy()` was not necessary in previous versions of sdbus-c++, as it was handled by the parent class. This was convenient, but suffered from a potential pure virtual function call issue. Only the class that implements virtual functions can do the registration, hence this slight inconvenience on user's shoulders.
 
 ```cpp
 #include <sdbus-c++/sdbus-c++.h>
@@ -652,8 +747,14 @@ class ConcatenatorProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::Concatena
 {
 public:
     ConcatenatorProxy(std::string destination, std::string objectPath)
-        : sdbus::ProxyInterfaces<org::sdbuscpp::Concatenator_proxy>(std::move(destination), std::move(objectPath))
+        : sdbus::ProxyInterfaces(std::move(destination), std::move(objectPath))
     {
+        registerProxy();
+    }
+
+    ~Concatenator()
+    {
+        unregisterProxy();
     }
 
 protected:
@@ -664,9 +765,9 @@ protected:
 };
 ```
 
-In the above example, a proxy is created that creates and maintains its own system bus connection. However, there are `ProxyInterfaces` class template constructor overloads that also take the connection from the user as the first parameter, and pass that connection over to the underlying proxy. The connection instance is used for all D-Bus proxy interfaces listed in the `ProxyInterfaces` template parameter list.
+In the above example, a proxy is created that creates and maintains its own system bus connection. However, there are `ProxyInterfaces` class template constructor overloads that also take the connection from the user as the first parameter, and pass that connection over to the underlying proxy. The connection instance is used by all interfaces listed in the `ProxyInterfaces` template parameter list.
 
-Note however that there are multiple `ProxyInterfaces` constructor overloads, and they differ in how the proxy behaves towards the D-Bus connection. These overloads precisely map the `sdbus::createObjectProxy` overloads, as they are actually implemented on top of them. See [Proxy and D-Bus connection](#Proxy-and-D-Bus-connection) for more info.
+Note however that there are multiple `ProxyInterfaces` constructor overloads, and they differ in how the proxy behaves towards the D-Bus connection. These overloads precisely map the `sdbus::createProxy` overloads, as they are actually implemented on top of them. See [Proxy and D-Bus connection](#Proxy-and-D-Bus-connection) for more info. We can even create a `IProxy` instance on our own, and inject it into our proxy class -- there is a constructor overload for it in `ProxyInterfaces`. This can help if we need to provide mocked implementations in our unit tests.
 
 Now let's use this proxy to make remote calls and listen to signals in a real application.
 
@@ -797,7 +898,7 @@ void concatenate(sdbus::Result<std::string>&& result, std::vector<int32_t> numbe
         methodResult.returnReply(result);
         
         // Emit the 'concatenated' signal with the resulting string
-        this->concatenated(result);
+        this->emitConcatenated(result);
     }).detach();
 }
 ```
@@ -828,7 +929,7 @@ sdbus-c++ stub generator can generate stub code for server-side async methods. W
 </node>
 ```
 
-For a real example of a server-side asynchronous D-Bus method, please look at sdbus-c++ [stress tests](/test/stresstests).
+For a real example of a server-side asynchronous D-Bus method, please look at sdbus-c++ [stress tests](/tests/stresstests).
 
 Asynchronous client-side methods
 --------------------------------
@@ -945,7 +1046,7 @@ For each client-side async method, a corresponding `on<MethodName>Reply` pure vi
     
 So in the specific example above, the stub generator will generate a `Concatenator_proxy` class similar to one shown in a [dedicated section above](#concatenator-client-glueh), with the difference that it will also generate an additional `virtual void onConcatenateReply(const sdbus::Error* error, const std::string& concatenatedString);` method, which we shall override in derived `ConcatenatorProxy`.
 
-For a real example of a client-side asynchronous D-Bus method, please look at sdbus-c++ [stress tests](/test/stresstests).
+For a real example of a client-side asynchronous D-Bus method, please look at sdbus-c++ [stress tests](/tests/stresstests).
 
 Using D-Bus properties
 ----------------------
@@ -986,12 +1087,14 @@ public:
         object_.registerProperty("status").onInterface(INTERFACE_NAME).withGetter([this](){ return this->status(); }).withSetter([this](const uint32_t& value){ this->status(value); });
     }
 
+    ~PropertyProvider_adaptor() = default;
+
 private:
     // property getter
     virtual uint32_t status() = 0;
     // property setter
     virtual void status(const uint32_t& value) = 0;
-    
+
     /*...*/
 };
 #endif
@@ -1003,7 +1106,7 @@ The proxy:
 class PropertyProvider_proxy
 {
     /*...*/
-    
+
 public:
     // getting the property value
     uint32_t status()
@@ -1016,13 +1119,31 @@ public:
     {
         object_.setProperty("status").onInterface(INTERFACE_NAME).toValue(value);
     }
-    
+
     /*...*/
 };
 ```
 
 When implementing the adaptor, we simply need to provide the body for `status` getter and setter method by overriding them. Then in the proxy, we just call them.
 
+Standard D-Bus interfaces
+-------------------------
+
+sdbus-c++ provides support for standard D-Bus interfaces. These are:
+
+* `org.freedesktop.DBus.Peer`
+* `org.freedesktop.DBus.Introspectable`
+* `org.freedesktop.DBus.Properties`
+* `org.freedesktop.DBus.ObjectManager`
+
+The implementation of methods that these interfaces define is provided by the library. `Peer`, `Introspectable` and `Properties` are automatically part of interfaces of every D-Bus object. `ObjectManager` is not automatically present and has to be enabled by the client when using `IObject` API. When using generated `ObjectManager_adaptor`, `ObjectManager` is enabled automatically in its constructor.
+
+Pre-generated `*_proxy` and `*_adaptor` convenience classes for these standard interfaces are located in `sdbus-c++/StandardInterfaces.h`. We add them simply as additional parameters of `sdbus::ProxyInterfaces` or `sdbus::AdaptorInterfaces` class template, and our proxy or adaptor class inherits convenience functions from those interface classes.
+
+For example, to conveniently emit a `PropertyChanged` signal under `org.freedesktop.DBus.Properties` interface, we just issue `emitPropertiesChangedSignal` function of our adaptor object.
+
+Note that signals of afore-mentioned standard D-Bus interfaces are not emitted by the library automatically. It's clients who are supposed to emit them.
+
 Conclusion
 ----------
 

include/sdbus-c++/AdaptorInterfaces.h

@@ -0,0 +1,140 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file AdaptorInterfaces.h
+ *
+ * Created on: Nov 8, 2016
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDBUS_CXX_ADAPTORINTERFACES_H_
+#define SDBUS_CXX_ADAPTORINTERFACES_H_
+
+#include <sdbus-c++/IObject.h>
+#include <cassert>
+#include <string>
+#include <memory>
+
+// Forward declarations
+namespace sdbus {
+    class IConnection;
+}
+
+namespace sdbus {
+
+    /********************************************//**
+     * @class ObjectHolder
+     *
+     * ObjectHolder is a helper that simply owns and provides
+     * access to an object to other classes in the inheritance
+     * hierarchy of an object based on generated interface classes.
+     *
+     ***********************************************/
+    class ObjectHolder
+    {
+    protected:
+        ObjectHolder(std::unique_ptr<IObject>&& object)
+            : object_(std::move(object))
+        {
+        }
+
+        const IObject& getObject() const
+        {
+            assert(object_ != nullptr);
+            return *object_;
+        }
+
+        IObject& getObject()
+        {
+            assert(object_ != nullptr);
+            return *object_;
+        }
+
+    private:
+        std::unique_ptr<IObject> object_;
+    };
+
+    /********************************************//**
+     * @class AdaptorInterfaces
+     *
+     * AdaptorInterfaces is a helper template class that joins all interface classes of a remote
+     * D-Bus object generated by sdbus-c++-xml2cpp to be used on the server (the adaptor) side,
+     * including some auxiliary classes. AdaptorInterfaces is the class that native-like object
+     * implementation classes written by users should inherit from and implement all pure virtual
+     * methods. So the _Interfaces template parameter is a list of sdbus-c++-xml2cpp-generated
+     * adaptor-side interface classes representing interfaces (with methods, signals and properties)
+     * of the D-Bus object.
+     *
+     * In the final adaptor class inherited from AdaptorInterfaces, it is necessary to finish
+     * adaptor registration in class constructor (finishRegistration();`), and, conversely,
+     * unregister the adaptor in class destructor (`unregister();`).
+     *
+     ***********************************************/
+    template <typename... _Interfaces>
+    class AdaptorInterfaces
+        : protected ObjectHolder
+        , public _Interfaces...
+    {
+    public:
+        /*!
+         * @brief Creates object instance
+         *
+         * @param[in] connection D-Bus connection where the object will publish itself
+         * @param[in] objectPath Path of the D-Bus object
+         *
+         * For more information, consult @ref createObject(sdbus::IConnection&,std::string)
+         */
+        AdaptorInterfaces(IConnection& connection, std::string objectPath)
+            : ObjectHolder(createObject(connection, std::move(objectPath)))
+            , _Interfaces(getObject())...
+        {
+        }
+
+        /*!
+         * @brief Finishes adaptor API registration and publishes the adaptor on the bus
+         *
+         * This function must be called in the constructor of the final adaptor class that implements AdaptorInterfaces.
+         *
+         * For more information, see underlying @ref IObject::finishRegistration()
+         */
+        void registerAdaptor()
+        {
+            getObject().finishRegistration();
+        }
+
+        /*!
+         * @brief Unregisters adaptors's API and removes it from the bus
+         *
+         * This function must be called in the destructor of the final adaptor class that implements AdaptorInterfaces.
+         *
+         * For more information, see underlying @ref IObject::unregister()
+         */
+        void unregisterAdaptor()
+        {
+            getObject().unregister();
+        }
+
+    protected:
+        using base_type = AdaptorInterfaces;
+    };
+
+}
+
+#endif /* SDBUS_CXX_ADAPTORINTERFACES_H_ */

include/sdbus-c++/ConvenienceApiClasses.h

@@ -1,7 +1,8 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
- * @file ConvenienceClasses.h
+ * @file ConvenienceApiClasses.h
  *
  * Created on: Jan 19, 2017
  * Project: sdbus-c++
@@ -23,8 +24,8 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef SDBUS_CXX_CONVENIENCECLASSES_H_
-#define SDBUS_CXX_CONVENIENCECLASSES_H_
+#ifndef SDBUS_CXX_CONVENIENCEAPICLASSES_H_
+#define SDBUS_CXX_CONVENIENCEAPICLASSES_H_
 
 #include <sdbus-c++/Message.h>
 #include <sdbus-c++/TypeTraits.h>
@@ -35,7 +36,7 @@
 // Forward declarations
 namespace sdbus {
     class IObject;
-    class IObjectProxy;
+    class IProxy;
     class Variant;
     class Error;
 }
@@ -157,7 +158,7 @@ namespace sdbus {
     class MethodInvoker
     {
     public:
-        MethodInvoker(IObjectProxy& objectProxy, const std::string& methodName);
+        MethodInvoker(IProxy& proxy, const std::string& methodName);
         MethodInvoker(MethodInvoker&& other) = default;
         MethodInvoker& operator=(MethodInvoker&& other) = default;
         ~MethodInvoker() noexcept(false);
@@ -169,7 +170,7 @@ namespace sdbus {
         void dontExpectReply();
 
     private:
-        IObjectProxy& objectProxy_;
+        IProxy& proxy_;
         const std::string& methodName_;
         MethodCall method_;
         int exceptions_{}; // Number of active exceptions when MethodInvoker is constructed
@@ -179,13 +180,13 @@ namespace sdbus {
     class AsyncMethodInvoker
     {
     public:
-        AsyncMethodInvoker(IObjectProxy& objectProxy, const std::string& methodName);
+        AsyncMethodInvoker(IProxy& proxy, const std::string& methodName);
         AsyncMethodInvoker& onInterface(const std::string& interfaceName);
         template <typename... _Args> AsyncMethodInvoker& withArguments(_Args&&... args);
         template <typename _Function> void uponReplyInvoke(_Function&& callback);
 
     private:
-        IObjectProxy& objectProxy_;
+        IProxy& proxy_;
         const std::string& methodName_;
         AsyncMethodCall method_;
     };
@@ -193,12 +194,12 @@ namespace sdbus {
     class SignalSubscriber
     {
     public:
-        SignalSubscriber(IObjectProxy& objectProxy, const std::string& signalName);
+        SignalSubscriber(IProxy& proxy, const std::string& signalName);
         SignalSubscriber& onInterface(const std::string& interfaceName);
         template <typename _Function> void call(_Function&& callback);
 
     private:
-        IObjectProxy& objectProxy_;
+        IProxy& proxy_;
         std::string signalName_;
         std::string interfaceName_;
     };
@@ -206,27 +207,28 @@ namespace sdbus {
     class PropertyGetter
     {
     public:
-        PropertyGetter(IObjectProxy& objectProxy, const std::string& propertyName);
+        PropertyGetter(IProxy& proxy, const std::string& propertyName);
         sdbus::Variant onInterface(const std::string& interfaceName);
 
     private:
-        IObjectProxy& objectProxy_;
+        IProxy& proxy_;
         std::string propertyName_;
     };
 
     class PropertySetter
     {
     public:
-        PropertySetter(IObjectProxy& objectProxy, const std::string& propertyName);
+        PropertySetter(IProxy& proxy, const std::string& propertyName);
         PropertySetter& onInterface(const std::string& interfaceName);
         template <typename _Value> void toValue(const _Value& value);
+        void toValue(const sdbus::Variant& value);
 
     private:
-        IObjectProxy& objectProxy_;
+        IProxy& proxy_;
         const std::string& propertyName_;
         std::string interfaceName_;
     };
 
 }
 
-#endif /* SDBUS_CXX_CONVENIENCECLASSES_H_ */
+#endif /* SDBUS_CXX_CONVENIENCEAPICLASSES_H_ */

include/sdbus-c++/ConvenienceApiClasses.inl

@@ -1,7 +1,8 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
- * @file ConvenienceClasses.inl
+ * @file ConvenienceApiClasses.inl
  *
  * Created on: Dec 19, 2016
  * Project: sdbus-c++
@@ -23,11 +24,11 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef SDBUS_CPP_CONVENIENCECLASSES_INL_
-#define SDBUS_CPP_CONVENIENCECLASSES_INL_
+#ifndef SDBUS_CPP_CONVENIENCEAPICLASSES_INL_
+#define SDBUS_CPP_CONVENIENCEAPICLASSES_INL_
 
 #include <sdbus-c++/IObject.h>
-#include <sdbus-c++/IObjectProxy.h>
+#include <sdbus-c++/IProxy.h>
 #include <sdbus-c++/Message.h>
 #include <sdbus-c++/MethodResult.h>
 #include <sdbus-c++/Types.h>
@@ -253,10 +254,10 @@ namespace sdbus {
         if (propertySignature_.empty())
             propertySignature_ = signature_of_function_output_arguments<_Function>::str();
 
-        getter_ = [callback = std::forward<_Function>(callback)](Message& msg)
+        getter_ = [callback = std::forward<_Function>(callback)](PropertyGetReply& reply)
         {
-            // Get the propety value and serialize it into the message
-            msg << callback();
+            // Get the propety value and serialize it into the pre-constructed reply message
+            reply << callback();
         };
 
         return *this;
@@ -271,14 +272,14 @@ namespace sdbus {
         if (propertySignature_.empty())
             propertySignature_ = signature_of_function_input_arguments<_Function>::str();
 
-        setter_ = [callback = std::forward<_Function>(callback)](Message& msg)
+        setter_ = [callback = std::forward<_Function>(callback)](PropertySetCall& call)
         {
             // Default-construct property value
             using property_type = function_argument_t<_Function, 0>;
             std::decay_t<property_type> property;
 
-            // Deserialize property value from the message
-            msg >> property;
+            // Deserialize property value from the incoming call message
+            call >> property;
 
             // Invoke setter with the value
             callback(property);
@@ -418,8 +419,8 @@ namespace sdbus {
 
     // Moved into the library to isolate from C++17 dependency
     /*
-    inline MethodInvoker::MethodInvoker(IObjectProxy& objectProxy, const std::string& methodName)
-        : objectProxy_(objectProxy)
+    inline MethodInvoker::MethodInvoker(IProxy& proxyObject, const std::string& methodName)
+        : proxy_(proxy)
         , methodName_(methodName)
         , exceptions_(std::uncaught_exceptions())
     {
@@ -444,13 +445,13 @@ namespace sdbus {
         // Therefore, we can allow callMethod() to throw even if we are in the destructor.
         // Bottomline is, to be on the safe side, the caller must take care of catching and reacting
         // to the exception thrown from here if the caller is a destructor itself.
-        objectProxy_.callMethod(method_);
+        proxy_.callMethod(method_);
     }
     */
 
     inline MethodInvoker& MethodInvoker::onInterface(const std::string& interfaceName)
     {
-        method_ = objectProxy_.createMethodCall(interfaceName, methodName_);
+        method_ = proxy_.createMethodCall(interfaceName, methodName_);
 
         return *this;
     }
@@ -470,7 +471,7 @@ namespace sdbus {
     {
         SDBUS_THROW_ERROR_IF(!method_.isValid(), "DBus interface not specified when calling a DBus method", EINVAL);
 
-        auto reply = objectProxy_.callMethod(method_);
+        auto reply = proxy_.callMethod(method_);
         methodCalled_ = true;
 
         detail::deserialize_pack(reply, args...);
@@ -484,15 +485,15 @@ namespace sdbus {
     }
 
 
-    inline AsyncMethodInvoker::AsyncMethodInvoker(IObjectProxy& objectProxy, const std::string& methodName)
-        : objectProxy_(objectProxy)
+    inline AsyncMethodInvoker::AsyncMethodInvoker(IProxy& proxy, const std::string& methodName)
+        : proxy_(proxy)
         , methodName_(methodName)
     {
     }
 
     inline AsyncMethodInvoker& AsyncMethodInvoker::onInterface(const std::string& interfaceName)
     {
-        method_ = objectProxy_.createAsyncMethodCall(interfaceName, methodName_);
+        method_ = proxy_.createAsyncMethodCall(interfaceName, methodName_);
 
         return *this;
     }
@@ -512,7 +513,7 @@ namespace sdbus {
     {
         SDBUS_THROW_ERROR_IF(!method_.isValid(), "DBus interface not specified when calling a DBus method", EINVAL);
 
-        objectProxy_.callMethod(method_, [callback = std::forward<_Function>(callback)](MethodReply& reply, const Error* error)
+        proxy_.callMethod(method_, [callback = std::forward<_Function>(callback)](MethodReply& reply, const Error* error)
         {
             // Create a tuple of callback input arguments' types, which will be used
             // as a storage for the argument values deserialized from the message.
@@ -528,8 +529,8 @@ namespace sdbus {
     }
 
 
-    inline SignalSubscriber::SignalSubscriber(IObjectProxy& objectProxy, const std::string& signalName)
-        : objectProxy_(objectProxy)
+    inline SignalSubscriber::SignalSubscriber(IProxy& proxy, const std::string& signalName)
+        : proxy_(proxy)
         , signalName_(signalName)
     {
     }
@@ -546,9 +547,9 @@ namespace sdbus {
     {
         SDBUS_THROW_ERROR_IF(interfaceName_.empty(), "DBus interface not specified when subscribing to a signal", EINVAL);
 
-        objectProxy_.registerSignalHandler( interfaceName_
-                                          , signalName_
-                                          , [callback = std::forward<_Function>(callback)](Signal& signal)
+        proxy_.registerSignalHandler( interfaceName_
+                                    , signalName_
+                                    , [callback = std::forward<_Function>(callback)](Signal& signal)
         {
             // Create a tuple of callback input arguments' types, which will be used
             // as a storage for the argument values deserialized from the signal message.
@@ -563,8 +564,8 @@ namespace sdbus {
     }
 
 
-    inline PropertyGetter::PropertyGetter(IObjectProxy& objectProxy, const std::string& propertyName)
-        : objectProxy_(objectProxy)
+    inline PropertyGetter::PropertyGetter(IProxy& proxy, const std::string& propertyName)
+        : proxy_(proxy)
         , propertyName_(propertyName)
     {
     }
@@ -572,7 +573,7 @@ namespace sdbus {
     inline sdbus::Variant PropertyGetter::onInterface(const std::string& interfaceName)
     {
         sdbus::Variant var;
-        objectProxy_
+        proxy_
             .callMethod("Get")
             .onInterface("org.freedesktop.DBus.Properties")
             .withArguments(interfaceName, propertyName_)
@@ -581,8 +582,8 @@ namespace sdbus {
     }
 
 
-    inline PropertySetter::PropertySetter(IObjectProxy& objectProxy, const std::string& propertyName)
-        : objectProxy_(objectProxy)
+    inline PropertySetter::PropertySetter(IProxy& proxy, const std::string& propertyName)
+        : proxy_(proxy)
         , propertyName_(propertyName)
     {
     }
@@ -596,15 +597,20 @@ namespace sdbus {
 
     template <typename _Value>
     inline void PropertySetter::toValue(const _Value& value)
+    {
+        PropertySetter::toValue(sdbus::Variant{value});
+    }
+
+    inline void PropertySetter::toValue(const sdbus::Variant& value)
     {
         SDBUS_THROW_ERROR_IF(interfaceName_.empty(), "DBus interface not specified when setting a property", EINVAL);
 
-        objectProxy_
+        proxy_
             .callMethod("Set")
             .onInterface("org.freedesktop.DBus.Properties")
-            .withArguments(interfaceName_, propertyName_, sdbus::Variant{value});
+            .withArguments(interfaceName_, propertyName_, value);
     }
 
 }
 
-#endif /* SDBUS_CPP_CONVENIENCECLASSES_INL_ */
+#endif /* SDBUS_CPP_CONVENIENCEAPICLASSES_INL_ */

include/sdbus-c++/Error.h

@@ -1,7 +1,8 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
- * @file ConvenienceClasses.h
+ * @file Error.h
  *
  * Created on: Nov 8, 2016
  * Project: sdbus-c++

include/sdbus-c++/Flags.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Flags.h
  *

include/sdbus-c++/IConnection.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file IConnection.h
  *
@@ -45,111 +46,120 @@ namespace sdbus {
     class IConnection
     {
     public:
+        virtual ~IConnection() = default;
+
         /*!
-        * @brief Requests D-Bus name on the connection
-        *
-        * @param[in] name Name to request
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Requests D-Bus name on the connection
+         *
+         * @param[in] name Name to request
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void requestName(const std::string& name) = 0;
 
         /*!
-        * @brief Releases D-Bus name on the connection
-        *
-        * @param[in] name Name to release
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Releases D-Bus name on the connection
+         *
+         * @param[in] name Name to release
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void releaseName(const std::string& name) = 0;
 
         /*!
-        * @brief Enters the D-Bus processing loop
-        *
-        * The incoming D-Bus messages are processed in the loop. The method
-        * blocks indefinitely, until unblocked via leaveProcessingLoop.
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Enters the D-Bus processing loop
+         *
+         * The incoming D-Bus messages are processed in the loop. The method
+         * blocks indefinitely, until unblocked via leaveProcessingLoop.
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void enterProcessingLoop() = 0;
 
         /*!
-        * @brief Enters the D-Bus processing loop in a separate thread
-        *
-        * The same as enterProcessingLoop, except that it doesn't block
-        * because it runs the loop in a separate thread managed internally.
-        */
+         * @brief Enters the D-Bus processing loop in a separate thread
+         *
+         * The same as enterProcessingLoop, except that it doesn't block
+         * because it runs the loop in a separate thread managed internally.
+         */
         virtual void enterProcessingLoopAsync() = 0;
 
         /*!
-        * @brief Leaves the D-Bus processing loop
-        *
-        * Ends the previously started processing loop.
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Leaves the D-Bus processing loop
+         *
+         * Ends the previously started processing loop.
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void leaveProcessingLoop() = 0;
 
-        inline virtual ~IConnection() = 0;
+        /*!
+         * @brief Adds an ObjectManager at the specified D-Bus object path
+         *
+         * Creates an ObjectManager interface at the specified object path on
+         * the connection. This is a convenient way to interrogate a connection
+         * to see what objects it has.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void addObjectManager(const std::string& objectPath) = 0;
     };
 
-    IConnection::~IConnection() {}
-
     /*!
-    * @brief Creates/opens D-Bus system connection
-    *
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus system connection
+     *
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createConnection();
 
     /*!
-    * @brief Creates/opens D-Bus system connection with a name
-    *
-    * @param[in] name Name to request on the connection after its opening
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus system connection with a name
+     *
+     * @param[in] name Name to request on the connection after its opening
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createConnection(const std::string& name);
 
     /*!
-    * @brief Creates/opens D-Bus system connection
-    *
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus system connection
+     *
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createSystemBusConnection();
 
     /*!
-    * @brief Creates/opens D-Bus system connection with a name
-    *
-    * @param[in] name Name to request on the connection after its opening
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus system connection with a name
+     *
+     * @param[in] name Name to request on the connection after its opening
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createSystemBusConnection(const std::string& name);
 
     /*!
-    * @brief Creates/opens D-Bus session connection
-    *
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus session connection
+     *
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createSessionBusConnection();
 
     /*!
-    * @brief Creates/opens D-Bus session connection with a name
-    *
-    * @param[in] name Name to request on the connection after its opening
-    * @return Connection instance
-    *
-    * @throws sdbus::Error in case of failure
-    */
+     * @brief Creates/opens D-Bus session connection with a name
+     *
+     * @param[in] name Name to request on the connection after its opening
+     * @return Connection instance
+     *
+     * @throws sdbus::Error in case of failure
+     */
     std::unique_ptr<sdbus::IConnection> createSessionBusConnection(const std::string& name);
 
 }

include/sdbus-c++/IObject.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file IObject.h
  *
@@ -26,12 +27,13 @@
 #ifndef SDBUS_CXX_IOBJECT_H_
 #define SDBUS_CXX_IOBJECT_H_
 
-#include <sdbus-c++/ConvenienceClasses.h>
+#include <sdbus-c++/ConvenienceApiClasses.h>
 #include <sdbus-c++/TypeTraits.h>
 #include <sdbus-c++/Flags.h>
 #include <functional>
 #include <string>
 #include <memory>
+#include <vector>
 
 // Forward declarations
 namespace sdbus {
@@ -44,31 +46,33 @@ namespace sdbus {
     /********************************************//**
      * @class IObject
      *
-     * An interface to D-Bus object. Provides API for registration
-     * of methods, signals, properties, and for emitting signals.
+     * IObject class represents a D-Bus object instance identified by a specific object path.
+     * D-Bus object provides its interfaces, methods, signals and properties on a bus
+     * identified by a specific bus name.
      *
-     * All methods throw @c sdbus::Error in case of failure.
-     * In general, the class is thread-aware, but not thread-safe.
-     * However, the operation of creating and sending asynchronous
-     * method replies, as well as creating and emitting
-     * signals, is thread-safe.
+     * All IObject member methods throw @c sdbus::Error in case of D-Bus or sdbus-c++ error.
+     * The IObject class has been designed as thread-aware. However, the operation of
+     * creating and sending asynchronous method replies, as well as creating and emitting
+     * signals, is thread-safe by design.
      *
      ***********************************************/
     class IObject
     {
     public:
+        virtual ~IObject() = default;
+
         /*!
-        * @brief Registers method that the object will provide on D-Bus
-        *
-        * @param[in] interfaceName Name of an interface that the method will belong to
-        * @param[in] methodName Name of the method
-        * @param[in] inputSignature D-Bus signature of method input parameters
-        * @param[in] outputSignature D-Bus signature of method output parameters
-        * @param[in] methodCallback Callback that implements the body of the method
-        * @param[in] flags D-Bus method flags (privileged, deprecated, or no reply)
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers method that the object will provide on D-Bus
+         *
+         * @param[in] interfaceName Name of an interface that the method will belong to
+         * @param[in] methodName Name of the method
+         * @param[in] inputSignature D-Bus signature of method input parameters
+         * @param[in] outputSignature D-Bus signature of method output parameters
+         * @param[in] methodCallback Callback that implements the body of the method
+         * @param[in] flags D-Bus method flags (privileged, deprecated, or no reply)
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void registerMethod( const std::string& interfaceName
                                    , const std::string& methodName
                                    , const std::string& inputSignature
@@ -77,31 +81,31 @@ namespace sdbus {
                                    , Flags flags = {} ) = 0;
 
         /*!
-        * @brief Registers signal that the object will emit on D-Bus
-        *
-        * @param[in] interfaceName Name of an interface that the signal will fall under
-        * @param[in] signalName Name of the signal
-        * @param[in] signature D-Bus signature of signal parameters
-        * @param[in] flags D-Bus signal flags (deprecated)
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers signal that the object will emit on D-Bus
+         *
+         * @param[in] interfaceName Name of an interface that the signal will fall under
+         * @param[in] signalName Name of the signal
+         * @param[in] signature D-Bus signature of signal parameters
+         * @param[in] flags D-Bus signal flags (deprecated)
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void registerSignal( const std::string& interfaceName
                                    , const std::string& signalName
                                    , const std::string& signature
                                    , Flags flags = {} ) = 0;
 
         /*!
-        * @brief Registers read-only property that the object will provide on D-Bus
-        *
-        * @param[in] interfaceName Name of an interface that the property will fall under
-        * @param[in] propertyName Name of the property
-        * @param[in] signature D-Bus signature of property parameters
-        * @param[in] getCallback Callback that implements the body of the property getter
-        * @param[in] flags D-Bus property flags (deprecated, property update behavior)
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers read-only property that the object will provide on D-Bus
+         *
+         * @param[in] interfaceName Name of an interface that the property will fall under
+         * @param[in] propertyName Name of the property
+         * @param[in] signature D-Bus signature of property parameters
+         * @param[in] getCallback Callback that implements the body of the property getter
+         * @param[in] flags D-Bus property flags (deprecated, property update behavior)
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void registerProperty( const std::string& interfaceName
                                      , const std::string& propertyName
                                      , const std::string& signature
@@ -109,17 +113,17 @@ namespace sdbus {
                                      , Flags flags = {} ) = 0;
 
         /*!
-        * @brief Registers read/write property that the object will provide on D-Bus
-        *
-        * @param[in] interfaceName Name of an interface that the property will fall under
-        * @param[in] propertyName Name of the property
-        * @param[in] signature D-Bus signature of property parameters
-        * @param[in] getCallback Callback that implements the body of the property getter
-        * @param[in] setCallback Callback that implements the body of the property setter
-        * @param[in] flags D-Bus property flags (deprecated, property update behavior)
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers read/write property that the object will provide on D-Bus
+         *
+         * @param[in] interfaceName Name of an interface that the property will fall under
+         * @param[in] propertyName Name of the property
+         * @param[in] signature D-Bus signature of property parameters
+         * @param[in] getCallback Callback that implements the body of the property getter
+         * @param[in] setCallback Callback that implements the body of the property setter
+         * @param[in] flags D-Bus property flags (deprecated, property update behavior)
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void registerProperty( const std::string& interfaceName
                                      , const std::string& propertyName
                                      , const std::string& signature
@@ -128,155 +132,259 @@ namespace sdbus {
                                      , Flags flags = {} ) = 0;
 
         /*!
-        * @brief Sets flags for a given interface
-        *
-        * @param[in] interfaceName Name of an interface whose flags will be set
-        * @param[in] flags Flags to be set
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Sets flags for a given interface
+         *
+         * @param[in] interfaceName Name of an interface whose flags will be set
+         * @param[in] flags Flags to be set
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void setInterfaceFlags(const std::string& interfaceName, Flags flags) = 0;
 
         /*!
-        * @brief Finishes the registration and exports object API on D-Bus
-        *
-        * The method exports all up to now registered methods, signals and properties on D-Bus.
-        * Must be called only once, after all methods, signals and properties have been registered.
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Finishes object API registration and publishes the object on the bus
+         *
+         * The method exports all up to now registered methods, signals and properties on D-Bus.
+         * Must be called after all methods, signals and properties have been registered.
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void finishRegistration() = 0;
 
         /*!
-        * @brief Creates a signal message
-        *
-        * @param[in] interfaceName Name of an interface that the signal belongs under
-        * @param[in] signalName Name of the signal
-        * @return A signal message
-        *
-        * Serialize signal arguments into the returned message and emit the signal by passing
-        * the message with serialized arguments to the @c emitSignal function.
-        * Alternatively, use higher-level API @c emitSignal(const std::string& signalName) defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Unregisters object's API and removes object from the bus
+         *
+         * This method unregisters the object, its interfaces, methods, signals and properties
+         * from the bus. Unregistration is done automatically also in object's destructor. This
+         * method makes sense if, in the process of object removal, we need to make sure that
+         * callbacks are unregistered explicitly before the final destruction of the object instance.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void unregister() = 0;
+
+        /*!
+         * @brief Creates a signal message
+         *
+         * @param[in] interfaceName Name of an interface that the signal belongs under
+         * @param[in] signalName Name of the signal
+         * @return A signal message
+         *
+         * Serialize signal arguments into the returned message and emit the signal by passing
+         * the message with serialized arguments to the @c emitSignal function.
+         * Alternatively, use higher-level API @c emitSignal(const std::string& signalName) defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual Signal createSignal(const std::string& interfaceName, const std::string& signalName) = 0;
 
         /*!
-        * @brief Emits signal on D-Bus
-        *
-        * @param[in] message Signal message to be sent out
-        *
-        * Note: To avoid messing with messages, use higher-level API defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Emits signal for this object path
+         *
+         * @param[in] message Signal message to be sent out
+         *
+         * Note: To avoid messing with messages, use higher-level API defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
         virtual void emitSignal(const sdbus::Signal& message) = 0;
 
         /*!
-        * @brief Provides D-Bus connection used by the object
-        *
-        * @return Reference to the D-Bus connection
-        */
+         * @brief Emits PropertyChanged signal for specified properties under a given interface of this object path
+         *
+         * @param[in] interfaceName Name of an interface that properties belong to
+         * @param[in] propNames Names of properties that will be included in the PropertiesChanged signal
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitPropertiesChangedSignal(const std::string& interfaceName, const std::vector<std::string>& propNames) = 0;
+
+        /*!
+         * @brief Emits PropertyChanged signal for all properties on a given interface of this object path
+         *
+         * @param[in] interfaceName Name of an interface
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitPropertiesChangedSignal(const std::string& interfaceName) = 0;
+
+        /*!
+         * @brief Emits InterfacesAdded signal on this object path
+         *
+         * This emits an InterfacesAdded signal on this object path, by iterating all registered
+         * interfaces on the path. All properties are queried and included in the signal.
+         * This call is equivalent to emitInterfacesAddedSignal() with an explicit list of
+         * registered interfaces. However, unlike emitInterfacesAddedSignal(interfaces), this
+         * call can figure out the list of supported interfaces itself. Furthermore, it properly
+         * adds the builtin org.freedesktop.DBus.* interfaces.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitInterfacesAddedSignal() = 0;
+
+        /*!
+         * @brief Emits InterfacesAdded signal on this object path
+         *
+         * This emits an InterfacesAdded signal on this object path with explicitly provided list
+         * of registered interfaces. As sdbus-c++ does currently not supported adding/removing
+         * interfaces of an existing object at run time (an object has a fixed set of interfaces
+         * registered by the time of invoking finishRegistration()), emitInterfacesAddedSignal(void)
+         * is probably what you are looking for.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitInterfacesAddedSignal(const std::vector<std::string>& interfaces) = 0;
+
+        /*!
+         * @brief Emits InterfacesRemoved signal on this object path
+         *
+         * This is like sd_bus_emit_object_added(), but emits an InterfacesRemoved signal on this
+         * object path. This only includes any registered interfaces but skips the properties.
+         * This function shall be called (just) before destroying the object.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitInterfacesRemovedSignal() = 0;
+
+        /*!
+         * @brief Emits InterfacesRemoved signal on this object path
+         *
+         * This emits an InterfacesRemoved signal on the given path with explicitly provided list
+         * of registered interfaces. As sdbus-c++ does currently not supported adding/removing
+         * interfaces of an existing object at run time (an object has a fixed set of interfaces
+         * registered by the time of invoking finishRegistration()), emitInterfacesRemovedSignal(void)
+         * is probably what you are looking for.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void emitInterfacesRemovedSignal(const std::vector<std::string>& interfaces) = 0;
+
+        /*!
+         * @brief Adds an ObjectManager interface at the path of this D-Bus object
+         *
+         * Creates an ObjectManager interface at the specified object path on
+         * the connection. This is a convenient way to interrogate a connection
+         * to see what objects it has.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void addObjectManager() = 0;
+
+        /*!
+         * @brief Removes an ObjectManager interface from the path of this D-Bus object
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void removeObjectManager() = 0;
+
+        /*!
+         * @brief Tests whether ObjectManager interface is added at the path of this D-Bus object
+         * @return True if ObjectManager interface is there, false otherwise
+         */
+        virtual bool hasObjectManager() const = 0;
+
+        /*!
+         * @brief Provides D-Bus connection used by the object
+         *
+         * @return Reference to the D-Bus connection
+         */
         virtual sdbus::IConnection& getConnection() const = 0;
 
         /*!
-        * @brief Registers method that the object will provide on D-Bus
-        *
-        * @param[in] methodName Name of the method
-        * @return A helper object for convenient registration of the method
-        *
-        * This is a high-level, convenience way of registering D-Bus methods that abstracts
-        * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
-        * in a message and D-Bus signatures automatically deduced from the parameters and return type
-        * of the provided native method implementation callback.
-        *
-        * Example of use:
-        * @code
-        * object.registerMethod("doFoo").onInterface("com.kistler.foo").implementedAs([this](int value){ return this->doFoo(value); });
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers method that the object will provide on D-Bus
+         *
+         * @param[in] methodName Name of the method
+         * @return A helper object for convenient registration of the method
+         *
+         * This is a high-level, convenience way of registering D-Bus methods that abstracts
+         * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
+         * in a message and D-Bus signatures automatically deduced from the parameters and return type
+         * of the provided native method implementation callback.
+         *
+         * Example of use:
+         * @code
+         * object.registerMethod("doFoo").onInterface("com.kistler.foo").implementedAs([this](int value){ return this->doFoo(value); });
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
         MethodRegistrator registerMethod(const std::string& methodName);
 
         /*!
-        * @brief Registers signal that the object will provide on D-Bus
-        *
-        * @param[in] signalName Name of the signal
-        * @return A helper object for convenient registration of the signal
-        *
-        * This is a high-level, convenience way of registering D-Bus signals that abstracts
-        * from the D-Bus message concept. Signal arguments are automatically (de)serialized
-        * in a message and D-Bus signatures automatically deduced from the provided native parameters.
-        *
-        * Example of use:
-        * @code
-        * object.registerSignal("paramChange").onInterface("com.kistler.foo").withParameters<std::map<int32_t, std::string>>();
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers signal that the object will provide on D-Bus
+         *
+         * @param[in] signalName Name of the signal
+         * @return A helper object for convenient registration of the signal
+         *
+         * This is a high-level, convenience way of registering D-Bus signals that abstracts
+         * from the D-Bus message concept. Signal arguments are automatically (de)serialized
+         * in a message and D-Bus signatures automatically deduced from the provided native parameters.
+         *
+         * Example of use:
+         * @code
+         * object.registerSignal("paramChange").onInterface("com.kistler.foo").withParameters<std::map<int32_t, std::string>>();
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
         SignalRegistrator registerSignal(const std::string& signalName);
 
         /*!
-        * @brief Registers property that the object will provide on D-Bus
-        *
-        * @param[in] propertyName Name of the property
-        * @return A helper object for convenient registration of the property
-        *
-        * This is a high-level, convenience way of registering D-Bus properties that abstracts
-        * from the D-Bus message concept. Property arguments are automatically (de)serialized
-        * in a message and D-Bus signatures automatically deduced from the provided native callbacks.
-        *
-        * Example of use:
-        * @code
-        * object_.registerProperty("state").onInterface("com.kistler.foo").withGetter([this](){ return this->state(); });
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Registers property that the object will provide on D-Bus
+         *
+         * @param[in] propertyName Name of the property
+         * @return A helper object for convenient registration of the property
+         *
+         * This is a high-level, convenience way of registering D-Bus properties that abstracts
+         * from the D-Bus message concept. Property arguments are automatically (de)serialized
+         * in a message and D-Bus signatures automatically deduced from the provided native callbacks.
+         *
+         * Example of use:
+         * @code
+         * object_.registerProperty("state").onInterface("com.kistler.foo").withGetter([this](){ return this->state(); });
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
         PropertyRegistrator registerProperty(const std::string& propertyName);
 
         /*!
-        * @brief Sets flags (annotations) for a given interface
-        *
-        * @param[in] interfaceName Name of an interface whose flags will be set
-        * @return A helper object for convenient setting of Interface flags
-        *
-        * This is a high-level, convenience alternative to the other setInterfaceFlags overload.
-        *
-        * Example of use:
-        * @code
-        * object_.setInterfaceFlags("com.kistler.foo").markAsDeprecated().withPropertyUpdateBehavior(sdbus::Flags::EMITS_NO_SIGNAL);
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Sets flags (annotations) for a given interface
+         *
+         * @param[in] interfaceName Name of an interface whose flags will be set
+         * @return A helper object for convenient setting of Interface flags
+         *
+         * This is a high-level, convenience alternative to the other setInterfaceFlags overload.
+         *
+         * Example of use:
+         * @code
+         * object_.setInterfaceFlags("com.kistler.foo").markAsDeprecated().withPropertyUpdateBehavior(sdbus::Flags::EMITS_NO_SIGNAL);
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
         InterfaceFlagsSetter setInterfaceFlags(const std::string& interfaceName);
 
         /*!
-        * @brief Emits signal on D-Bus
-        *
-        * @param[in] signalName Name of the signal
-        * @return A helper object for convenient emission of signals
-        *
-        * This is a high-level, convenience way of emitting D-Bus signals that abstracts
-        * from the D-Bus message concept. Signal arguments are automatically serialized
-        * in a message and D-Bus signatures automatically deduced from the provided native arguments.
-        *
-        * Example of use:
-        * @code
-        * int arg1 = ...;
-        * double arg2 = ...;
-        * object_.emitSignal("fooSignal").onInterface("com.kistler.foo").withArguments(arg1, arg2);
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
+         * @brief Emits signal on D-Bus
+         *
+         * @param[in] signalName Name of the signal
+         * @return A helper object for convenient emission of signals
+         *
+         * This is a high-level, convenience way of emitting D-Bus signals that abstracts
+         * from the D-Bus message concept. Signal arguments are automatically serialized
+         * in a message and D-Bus signatures automatically deduced from the provided native arguments.
+         *
+         * Example of use:
+         * @code
+         * int arg1 = ...;
+         * double arg2 = ...;
+         * object_.emitSignal("fooSignal").onInterface("com.kistler.foo").withArguments(arg1, arg2);
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
         SignalEmitter emitSignal(const std::string& signalName);
-
-        virtual ~IObject() = 0;
     };
 
     inline MethodRegistrator IObject::registerMethod(const std::string& methodName)
@@ -286,17 +394,17 @@ namespace sdbus {
 
     inline SignalRegistrator IObject::registerSignal(const std::string& signalName)
     {
-        return SignalRegistrator(*this, std::move(signalName));
+        return SignalRegistrator(*this, signalName);
     }
 
     inline PropertyRegistrator IObject::registerProperty(const std::string& propertyName)
     {
-        return PropertyRegistrator(*this, std::move(propertyName));
+        return PropertyRegistrator(*this, propertyName);
     }
 
     inline InterfaceFlagsSetter IObject::setInterfaceFlags(const std::string& interfaceName)
     {
-        return InterfaceFlagsSetter(*this, std::move(interfaceName));
+        return InterfaceFlagsSetter(*this, interfaceName);
     }
 
     inline SignalEmitter IObject::emitSignal(const std::string& signalName)
@@ -304,30 +412,28 @@ namespace sdbus {
         return SignalEmitter(*this, signalName);
     }
 
-    inline IObject::~IObject() {}
-
     /*!
-    * @brief Creates instance representing a D-Bus object
-    *
-    * @param[in] connection D-Bus connection to be used by the object
-    * @param[in] objectPath Path of the D-Bus object
-    * @return Pointer to the object representation instance
-    *
-    * The provided connection will be used by the object to export methods,
-    * issue signals and provide properties.
-    *
-    * Creating a D-Bus object instance is (thread-)safe even upon the connection
-    * which is already running its processing loop.
-    *
-    * Code example:
-    * @code
-    * auto proxy = sdbus::createObject(connection, "/com/kistler/foo");
-    * @endcode
-    */
+     * @brief Creates instance representing a D-Bus object
+     *
+     * @param[in] connection D-Bus connection to be used by the object
+     * @param[in] objectPath Path of the D-Bus object
+     * @return Pointer to the object representation instance
+     *
+     * The provided connection will be used by the object to export methods,
+     * issue signals and provide properties.
+     *
+     * Creating a D-Bus object instance is (thread-)safe even upon the connection
+     * which is already running its processing loop.
+     *
+     * Code example:
+     * @code
+     * auto proxy = sdbus::createObject(connection, "/com/kistler/foo");
+     * @endcode
+     */
     std::unique_ptr<sdbus::IObject> createObject(sdbus::IConnection& connection, std::string objectPath);
 
 }
 
-#include <sdbus-c++/ConvenienceClasses.inl>
+#include <sdbus-c++/ConvenienceApiClasses.inl>
 
 #endif /* SDBUS_CXX_IOBJECT_H_ */

include/sdbus-c++/IObjectProxy.h

@@ -1,350 +0,0 @@
-/**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file IObjectProxy.h
- *
- * Created on: Nov 8, 2016
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef SDBUS_CXX_IOBJECTPROXY_H_
-#define SDBUS_CXX_IOBJECTPROXY_H_
-
-#include <sdbus-c++/ConvenienceClasses.h>
-#include <string>
-#include <memory>
-#include <functional>
-
-// Forward declarations
-namespace sdbus {
-    class MethodCall;
-    class AsyncMethodCall;
-    class MethodReply;
-    class IConnection;
-}
-
-namespace sdbus {
-
-    /********************************************//**
-     * @class IObjectProxy
-     *
-     * An interface to D-Bus object proxy. Provides API for calling
-     * methods, getting/setting properties, and for registering to signals.
-     *
-     * All methods throw @c sdbus::Error in case of failure.
-     * In general, the class is thread-aware, but not thread-safe.
-     * However, the operation of creating and sending method calls
-     * (both synchronously and asynchronously) is thread-safe.
-     *
-     ***********************************************/
-    class IObjectProxy
-    {
-    public:
-        /*!
-        * @brief Creates a method call message
-        *
-        * @param[in] interfaceName Name of an interface that the method is defined under
-        * @param[in] methodName Name of the method
-        * @return A method call message
-        *
-        * Serialize method arguments into the returned message and invoke the method by passing
-        * the message with serialized arguments to the @c callMethod function.
-        * Alternatively, use higher-level API @c callMethod(const std::string& methodName) defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual MethodCall createMethodCall(const std::string& interfaceName, const std::string& methodName) = 0;
-
-        /*!
-        * @brief Creates an asynchronous method call message
-        *
-        * @param[in] interfaceName Name of an interface that the method is defined under
-        * @param[in] methodName Name of the method
-        * @return A method call message
-        *
-        * Serialize method arguments into the returned message and invoke the method by passing
-        * the message with serialized arguments to the @c callMethod function.
-        * Alternatively, use higher-level API @c callMethodAsync(const std::string& methodName) defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual AsyncMethodCall createAsyncMethodCall(const std::string& interfaceName, const std::string& methodName) = 0;
-
-        /*!
-        * @brief Calls method on the proxied D-Bus object
-        *
-        * @param[in] message Message representing a method call
-        * @return A method reply message
-        *
-        * Normally, the call is blocking, i.e. it waits for the remote method to finish with either
-        * a return value or an error.
-        *
-        * If the method call argument is set to not expect reply, the call will not wait for the remote
-        * method to finish, i.e. the call will be non-blocking, and the function will return an empty,
-        * invalid MethodReply object (representing void).
-        *
-        * Note: To avoid messing with messages, use higher-level API defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual MethodReply callMethod(const MethodCall& message) = 0;
-
-        /*!
-        * @brief Calls method on the proxied D-Bus object asynchronously
-        *
-        * @param[in] message Message representing an async method call
-        * @param[in] asyncReplyCallback Handler for the async reply
-        *
-        * The call is non-blocking. It doesn't wait for the reply. Once the reply arrives,
-        * the provided async reply handler will get invoked from the context of the connection
-        * event loop processing thread.
-        *
-        * Note: To avoid messing with messages, use higher-level API defined below.
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual void callMethod(const AsyncMethodCall& message, async_reply_handler asyncReplyCallback) = 0;
-
-        /*!
-        * @brief Registers a handler for the desired signal emitted by the proxied D-Bus object
-        *
-        * @param[in] interfaceName Name of an interface that the signal belongs to
-        * @param[in] signalName Name of the signal
-        * @param[in] signalHandler Callback that implements the body of the signal handler
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual void registerSignalHandler( const std::string& interfaceName
-                                          , const std::string& signalName
-                                          , signal_handler signalHandler ) = 0;
-
-        /*!
-        * @brief Finishes the registration of signal handlers
-        *
-        * The method physically subscribes to the desired signals.
-        * Must be called only once, after all signals have been registered already.
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        virtual void finishRegistration() = 0;
-
-        /*!
-        * @brief Calls method on the proxied D-Bus object
-        *
-        * @param[in] methodName Name of the method
-        * @return A helper object for convenient invocation of the method
-        *
-        * This is a high-level, convenience way of calling D-Bus methods that abstracts
-        * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
-        * in a message and D-Bus signatures automatically deduced from the provided native arguments
-        * and return values.
-        *
-        * Example of use:
-        * @code
-        * int result, a = ..., b = ...;
-        * object_.callMethod("multiply").onInterface(INTERFACE_NAME).withArguments(a, b).storeResultsTo(result);
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        MethodInvoker callMethod(const std::string& methodName);
-
-        /*!
-        * @brief Calls method on the proxied D-Bus object asynchronously
-        *
-        * @param[in] methodName Name of the method
-        * @return A helper object for convenient asynchronous invocation of the method
-        *
-        * This is a high-level, convenience way of calling D-Bus methods that abstracts
-        * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
-        * in a message and D-Bus signatures automatically deduced from the provided native arguments
-        * and return values.
-        *
-        * Example of use:
-        * @code
-        * int a = ..., b = ...;
-        * object_.callMethodAsync("multiply").onInterface(INTERFACE_NAME).withArguments(a, b).uponReplyInvoke([](int result)
-        * {
-        *     std::cout << "Got result of multiplying " << a << " and " << b << ": " << result << std::endl;
-        * });
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        AsyncMethodInvoker callMethodAsync(const std::string& methodName);
-
-        /*!
-        * @brief Registers signal handler for a given signal of the proxied D-Bus object
-        *
-        * @param[in] signalName Name of the signal
-        * @return A helper object for convenient registration of the signal handler
-        *
-        * This is a high-level, convenience way of registering to D-Bus signals that abstracts
-        * from the D-Bus message concept. Signal arguments are automatically serialized
-        * in a message and D-Bus signatures automatically deduced from the parameters
-        * of the provided native signal callback.
-        *
-        * Example of use:
-        * @code
-        * object_.uponSignal("fooSignal").onInterface("com.kistler.foo").call([this](int arg1, double arg2){ this->onFooSignal(arg1, arg2); });
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        SignalSubscriber uponSignal(const std::string& signalName);
-
-        /*!
-        * @brief Gets value of a property of the proxied D-Bus object
-        *
-        * @param[in] propertyName Name of the property
-        * @return A helper object for convenient getting of property value
-        *
-        * This is a high-level, convenience way of reading D-Bus property values that abstracts
-        * from the D-Bus message concept. sdbus::Variant is returned which shall then be converted
-        * to the real property type (implicit conversion is supported).
-        *
-        * Example of use:
-        * @code
-        * int state = object.getProperty("state").onInterface("com.kistler.foo");
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        PropertyGetter getProperty(const std::string& propertyName);
-
-        /*!
-        * @brief Sets value of a property of the proxied D-Bus object
-        *
-        * @param[in] propertyName Name of the property
-        * @return A helper object for convenient setting of property value
-        *
-        * This is a high-level, convenience way of writing D-Bus property values that abstracts
-        * from the D-Bus message concept.
-        *
-        * Example of use:
-        * @code
-        * int state = ...;
-        * object_.setProperty("state").onInterface("com.kistler.foo").toValue(state);
-        * @endcode
-        *
-        * @throws sdbus::Error in case of failure
-        */
-        PropertySetter setProperty(const std::string& propertyName);
-
-        virtual ~IObjectProxy() = 0;
-    };
-
-    inline MethodInvoker IObjectProxy::callMethod(const std::string& methodName)
-    {
-        return MethodInvoker(*this, methodName);
-    }
-
-    inline AsyncMethodInvoker IObjectProxy::callMethodAsync(const std::string& methodName)
-    {
-        return AsyncMethodInvoker(*this, methodName);
-    }
-
-    inline SignalSubscriber IObjectProxy::uponSignal(const std::string& signalName)
-    {
-        return SignalSubscriber(*this, signalName);
-    }
-
-    inline PropertyGetter IObjectProxy::getProperty(const std::string& propertyName)
-    {
-        return PropertyGetter(*this, propertyName);
-    }
-
-    inline PropertySetter IObjectProxy::setProperty(const std::string& propertyName)
-    {
-        return PropertySetter(*this, propertyName);
-    }
-
-    inline IObjectProxy::~IObjectProxy() {}
-
-    /*!
-    * @brief Creates object proxy instance
-    *
-    * @param[in] connection D-Bus connection to be used by the proxy object
-    * @param[in] destination Bus name that provides a D-Bus object
-    * @param[in] objectPath Path of the D-Bus object
-    * @return Pointer to the object proxy instance
-    *
-    * The provided connection will be used by the proxy to issue calls against the object,
-    * and signals, if any, will be subscribed to on this connection. The caller still
-    * remains the owner of the connection (the proxy just keeps a reference to it), and
-    * should make sure that a processing loop is running on that connection, so the proxy
-    * may receive incoming signals and asynchronous method replies.
-    *
-    * Code example:
-    * @code
-    * auto proxy = sdbus::createObjectProxy(connection, "com.kistler.foo", "/com/kistler/foo");
-    * @endcode
-    */
-    std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( sdbus::IConnection& connection
-                                                          , std::string destination
-                                                          , std::string objectPath );
-
-    /*!
-    * @brief Creates object proxy instance
-    *
-    * @param[in] connection D-Bus connection to be used by the proxy object
-    * @param[in] destination Bus name that provides a D-Bus object
-    * @param[in] objectPath Path of the D-Bus object
-    * @return Pointer to the object proxy instance
-    *
-    * The provided connection will be used by the proxy to issue calls against the object,
-    * and signals, if any, will be subscribed to on this connection. The Object proxy becomes
-    * an exclusive owner of this connection, and will automatically start a procesing loop
-    * upon that connection in a separate internal thread. Handlers for incoming signals and
-    * asynchronous method replies will be executed in the context of that thread.
-    *
-    * Code example:
-    * @code
-    * auto proxy = sdbus::createObjectProxy(std::move(connection), "com.kistler.foo", "/com/kistler/foo");
-    * @endcode
-    */
-    std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( std::unique_ptr<sdbus::IConnection>&& connection
-                                                          , std::string destination
-                                                          , std::string objectPath );
-
-    /*!
-    * @brief Creates object proxy instance that uses its own D-Bus connection
-    *
-    * @param[in] destination Bus name that provides a D-Bus object
-    * @param[in] objectPath Path of the D-Bus object
-    * @return Pointer to the object proxy instance
-    *
-    * No D-Bus connection is provided here, so the object proxy will create and manage
-    * his own connection, and will automatically start a procesing loop upon that connection
-    * in a separate internal thread. Handlers for incoming signals and asynchronous
-    * method replies will be executed in the context of that thread.
-    *
-    * Code example:
-    * @code
-    * auto proxy = sdbus::createObjectProxy("com.kistler.foo", "/com/kistler/foo");
-    * @endcode
-    */
-    std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( std::string destination
-                                                          , std::string objectPath );
-
-}
-
-#include <sdbus-c++/ConvenienceClasses.inl>
-
-#endif /* SDBUS_CXX_IOBJECTPROXY_H_ */

include/sdbus-c++/IProxy.h

@@ -0,0 +1,362 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file IProxy.h
+ *
+ * Created on: Nov 8, 2016
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDBUS_CXX_IPROXY_H_
+#define SDBUS_CXX_IPROXY_H_
+
+#include <sdbus-c++/ConvenienceApiClasses.h>
+#include <string>
+#include <memory>
+#include <functional>
+
+// Forward declarations
+namespace sdbus {
+    class MethodCall;
+    class AsyncMethodCall;
+    class MethodReply;
+    class IConnection;
+}
+
+namespace sdbus {
+
+    /********************************************//**
+     * @class IProxy
+     *
+     * IProxy class represents a proxy object, which is a convenient local object created
+     * to represent a remote D-Bus object in another process.
+     * The proxy enables calling methods on remote objects, receiving signals from remote
+     * objects, and getting/setting properties of remote objects.
+     *
+     * All IProxy member methods throw @c sdbus::Error in case of D-Bus or sdbus-c++ error.
+     * The IProxy class has been designed as thread-aware. However, the operation of
+     * creating and sending method calls (both synchronously and asynchronously) is
+     * thread-safe by design.
+     *
+     ***********************************************/
+    class IProxy
+    {
+    public:
+        virtual ~IProxy() = default;
+
+        /*!
+         * @brief Creates a method call message
+         *
+         * @param[in] interfaceName Name of an interface that provides a given method
+         * @param[in] methodName Name of the method
+         * @return A method call message
+         *
+         * Serialize method arguments into the returned message and invoke the method by passing
+         * the message with serialized arguments to the @c callMethod function.
+         * Alternatively, use higher-level API @c callMethod(const std::string& methodName) defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual MethodCall createMethodCall(const std::string& interfaceName, const std::string& methodName) = 0;
+
+        /*!
+         * @brief Creates an asynchronous method call message
+         *
+         * @param[in] interfaceName Name of an interface that provides a given method
+         * @param[in] methodName Name of the method
+         * @return A method call message
+         *
+         * Serialize method arguments into the returned message and invoke the method by passing
+         * the message with serialized arguments to the @c callMethod function.
+         * Alternatively, use higher-level API @c callMethodAsync(const std::string& methodName) defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual AsyncMethodCall createAsyncMethodCall(const std::string& interfaceName, const std::string& methodName) = 0;
+
+        /*!
+         * @brief Calls method on the proxied D-Bus object
+         *
+         * @param[in] message Message representing a method call
+         * @return A method reply message
+         *
+         * Normally, the call is blocking, i.e. it waits for the remote method to finish with either
+         * a return value or an error.
+         *
+         * If the method call argument is set to not expect reply, the call will not wait for the remote
+         * method to finish, i.e. the call will be non-blocking, and the function will return an empty,
+         * invalid MethodReply object (representing void).
+         *
+         * Note: To avoid messing with messages, use higher-level API defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual MethodReply callMethod(const MethodCall& message) = 0;
+
+        /*!
+         * @brief Calls method on the proxied D-Bus object asynchronously
+         *
+         * @param[in] message Message representing an async method call
+         * @param[in] asyncReplyCallback Handler for the async reply
+         *
+         * The call is non-blocking. It doesn't wait for the reply. Once the reply arrives,
+         * the provided async reply handler will get invoked from the context of the connection
+         * event loop processing thread.
+         *
+         * Note: To avoid messing with messages, use higher-level API defined below.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void callMethod(const AsyncMethodCall& message, async_reply_handler asyncReplyCallback) = 0;
+
+        /*!
+         * @brief Registers a handler for the desired signal emitted by the proxied D-Bus object
+         *
+         * @param[in] interfaceName Name of an interface that the signal belongs to
+         * @param[in] signalName Name of the signal
+         * @param[in] signalHandler Callback that implements the body of the signal handler
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void registerSignalHandler( const std::string& interfaceName
+                                          , const std::string& signalName
+                                          , signal_handler signalHandler ) = 0;
+
+        /*!
+         * @brief Finishes the registration of signal handlers
+         *
+         * The method physically subscribes to the desired signals.
+         * Must be called only once, after all signals have been registered already.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void finishRegistration() = 0;
+
+        /*!
+         * @brief Unregisters proxy's signal handlers and stops receving replies to pending async calls
+         *
+         * Unregistration is done automatically also in proxy's destructor. This method makes
+         * sense if, in the process of proxy removal, we need to make sure that callbacks
+         * are unregistered explicitly before the final destruction of the proxy instance.
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        virtual void unregister() = 0;
+
+        /*!
+         * @brief Calls method on the proxied D-Bus object
+         *
+         * @param[in] methodName Name of the method
+         * @return A helper object for convenient invocation of the method
+         *
+         * This is a high-level, convenience way of calling D-Bus methods that abstracts
+         * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
+         * in a message and D-Bus signatures automatically deduced from the provided native arguments
+         * and return values.
+         *
+         * Example of use:
+         * @code
+         * int result, a = ..., b = ...;
+         * object_.callMethod("multiply").onInterface(INTERFACE_NAME).withArguments(a, b).storeResultsTo(result);
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        MethodInvoker callMethod(const std::string& methodName);
+
+        /*!
+         * @brief Calls method on the proxied D-Bus object asynchronously
+         *
+         * @param[in] methodName Name of the method
+         * @return A helper object for convenient asynchronous invocation of the method
+         *
+         * This is a high-level, convenience way of calling D-Bus methods that abstracts
+         * from the D-Bus message concept. Method arguments/return value are automatically (de)serialized
+         * in a message and D-Bus signatures automatically deduced from the provided native arguments
+         * and return values.
+         *
+         * Example of use:
+         * @code
+         * int a = ..., b = ...;
+         * object_.callMethodAsync("multiply").onInterface(INTERFACE_NAME).withArguments(a, b).uponReplyInvoke([](int result)
+         * {
+         *     std::cout << "Got result of multiplying " << a << " and " << b << ": " << result << std::endl;
+         * });
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        AsyncMethodInvoker callMethodAsync(const std::string& methodName);
+
+        /*!
+         * @brief Registers signal handler for a given signal of the proxied D-Bus object
+         *
+         * @param[in] signalName Name of the signal
+         * @return A helper object for convenient registration of the signal handler
+         *
+         * This is a high-level, convenience way of registering to D-Bus signals that abstracts
+         * from the D-Bus message concept. Signal arguments are automatically serialized
+         * in a message and D-Bus signatures automatically deduced from the parameters
+         * of the provided native signal callback.
+         *
+         * Example of use:
+         * @code
+         * object_.uponSignal("fooSignal").onInterface("com.kistler.foo").call([this](int arg1, double arg2){ this->onFooSignal(arg1, arg2); });
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        SignalSubscriber uponSignal(const std::string& signalName);
+
+        /*!
+         * @brief Gets value of a property of the proxied D-Bus object
+         *
+         * @param[in] propertyName Name of the property
+         * @return A helper object for convenient getting of property value
+         *
+         * This is a high-level, convenience way of reading D-Bus property values that abstracts
+         * from the D-Bus message concept. sdbus::Variant is returned which shall then be converted
+         * to the real property type (implicit conversion is supported).
+         *
+         * Example of use:
+         * @code
+         * int state = object.getProperty("state").onInterface("com.kistler.foo");
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        PropertyGetter getProperty(const std::string& propertyName);
+
+        /*!
+         * @brief Sets value of a property of the proxied D-Bus object
+         *
+         * @param[in] propertyName Name of the property
+         * @return A helper object for convenient setting of property value
+         *
+         * This is a high-level, convenience way of writing D-Bus property values that abstracts
+         * from the D-Bus message concept.
+         *
+         * Example of use:
+         * @code
+         * int state = ...;
+         * object_.setProperty("state").onInterface("com.kistler.foo").toValue(state);
+         * @endcode
+         *
+         * @throws sdbus::Error in case of failure
+         */
+        PropertySetter setProperty(const std::string& propertyName);
+    };
+
+    inline MethodInvoker IProxy::callMethod(const std::string& methodName)
+    {
+        return MethodInvoker(*this, methodName);
+    }
+
+    inline AsyncMethodInvoker IProxy::callMethodAsync(const std::string& methodName)
+    {
+        return AsyncMethodInvoker(*this, methodName);
+    }
+
+    inline SignalSubscriber IProxy::uponSignal(const std::string& signalName)
+    {
+        return SignalSubscriber(*this, signalName);
+    }
+
+    inline PropertyGetter IProxy::getProperty(const std::string& propertyName)
+    {
+        return PropertyGetter(*this, propertyName);
+    }
+
+    inline PropertySetter IProxy::setProperty(const std::string& propertyName)
+    {
+        return PropertySetter(*this, propertyName);
+    }
+
+    /*!
+     * @brief Creates a proxy object for a specific remote D-Bus object
+     *
+     * @param[in] connection D-Bus connection to be used by the proxy object
+     * @param[in] destination Bus name that provides the remote D-Bus object
+     * @param[in] objectPath Path of the remote D-Bus object
+     * @return Pointer to the proxy object instance
+     *
+     * The provided connection will be used by the proxy to issue calls against the object,
+     * and signals, if any, will be subscribed to on this connection. The caller still
+     * remains the owner of the connection (the proxy just keeps a reference to it), and
+     * should make sure that a processing loop is running on that connection, so the proxy
+     * may receive incoming signals and asynchronous method replies.
+     *
+     * Code example:
+     * @code
+     * auto proxy = sdbus::createProxy(connection, "com.kistler.foo", "/com/kistler/foo");
+     * @endcode
+     */
+    std::unique_ptr<sdbus::IProxy> createProxy( sdbus::IConnection& connection
+                                              , std::string destination
+                                              , std::string objectPath );
+
+    /*!
+     * @brief Creates a proxy object for a specific remote D-Bus object
+     *
+     * @param[in] connection D-Bus connection to be used by the proxy object
+     * @param[in] destination Bus name that provides the remote D-Bus object
+     * @param[in] objectPath Path of the remote D-Bus object
+     * @return Pointer to the object proxy instance
+     *
+     * The provided connection will be used by the proxy to issue calls against the object,
+     * and signals, if any, will be subscribed to on this connection. The Object proxy becomes
+     * an exclusive owner of this connection, and will automatically start a procesing loop
+     * upon that connection in a separate internal thread. Handlers for incoming signals and
+     * asynchronous method replies will be executed in the context of that thread.
+     *
+     * Code example:
+     * @code
+     * auto proxy = sdbus::createProxy(std::move(connection), "com.kistler.foo", "/com/kistler/foo");
+     * @endcode
+     */
+    std::unique_ptr<sdbus::IProxy> createProxy( std::unique_ptr<sdbus::IConnection>&& connection
+                                              , std::string destination
+                                              , std::string objectPath );
+
+    /*!
+     * @brief Creates a proxy object for a specific remote D-Bus object
+     *
+     * @param[in] destination Bus name that provides the remote D-Bus object
+     * @param[in] objectPath Path of the remote D-Bus object
+     * @return Pointer to the object proxy instance
+     *
+     * No D-Bus connection is provided here, so the object proxy will create and manage
+     * his own connection, and will automatically start a procesing loop upon that connection
+     * in a separate internal thread. Handlers for incoming signals and asynchronous
+     * method replies will be executed in the context of that thread.
+     *
+     * Code example:
+     * @code
+     * auto proxy = sdbus::createProxy("com.kistler.foo", "/com/kistler/foo");
+     * @endcode
+     */
+    std::unique_ptr<sdbus::IProxy> createProxy( std::string destination
+                                              , std::string objectPath );
+
+}
+
+#include <sdbus-c++/ConvenienceApiClasses.inl>
+
+#endif /* SDBUS_CXX_IPROXY_H_ */

include/sdbus-c++/Interfaces.h

@@ -1,156 +0,0 @@
-/**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file Interfaces.h
- *
- * Created on: Nov 8, 2016
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef SDBUS_CXX_INTERFACES_H_
-#define SDBUS_CXX_INTERFACES_H_
-
-#include <sdbus-c++/IObject.h>
-#include <sdbus-c++/IObjectProxy.h>
-#include <cassert>
-#include <string>
-#include <memory>
-
-// Forward declarations
-namespace sdbus {
-    class IConnection;
-}
-
-namespace sdbus {
-
-    template <typename _Object>
-    class ObjectHolder
-    {
-    protected:
-        ObjectHolder(std::unique_ptr<_Object>&& object)
-            : object_(std::move(object))
-        {
-        }
-
-        const _Object& getObject() const
-        {
-            assert(object_ != nullptr);
-            return *object_;
-        }
-
-        _Object& getObject()
-        {
-            assert(object_ != nullptr);
-            return *object_;
-        }
-
-    private:
-        std::unique_ptr<_Object> object_;
-    };
-
-    /********************************************//**
-     * @class Interfaces
-     *
-     * A helper template class that a user class representing a D-Bus object
-     * should inherit from, providing as template arguments the adaptor
-     * classes representing D-Bus interfaces that the object implements.
-     *
-     ***********************************************/
-    template <typename... _Interfaces>
-    class Interfaces
-        : protected ObjectHolder<IObject>
-        , public _Interfaces...
-    {
-    public:
-        Interfaces(IConnection& connection, std::string objectPath)
-            : ObjectHolder<IObject>(createObject(connection, std::move(objectPath)))
-            , _Interfaces(getObject())...
-        {
-            getObject().finishRegistration();
-        }
-    };
-
-    /********************************************//**
-     * @class Interfaces
-     *
-     * A helper template class that a user class representing a proxy of a
-     * D-Bus object should inherit from, providing as template arguments the proxy
-     * classes representing object D-Bus interfaces that the object implements.
-     *
-     ***********************************************/
-    template <typename... _Interfaces>
-    class ProxyInterfaces
-        : protected ObjectHolder<IObjectProxy>
-        , public _Interfaces...
-    {
-    public:
-        /*!
-        * @brief Creates fully working object proxy instance
-        *
-        * @param[in] destination Bus name that provides a D-Bus object
-        * @param[in] objectPath Path of the D-Bus object
-        *
-        * This constructor overload creates a proxy that manages its own D-Bus connection(s).
-        * For more information on its behavior, consult @ref createObjectProxy(std::string, std::string)
-        */
-        ProxyInterfaces(std::string destination, std::string objectPath)
-            : ObjectHolder<IObjectProxy>(createObjectProxy(std::move(destination), std::move(objectPath)))
-            , _Interfaces(getObject())...
-        {
-            getObject().finishRegistration();
-        }
-
-        /*!
-        * @brief Creates fully working object proxy instance
-        *
-        * @param[in] connection D-Bus connection to be used by the proxy object
-        * @param[in] destination Bus name that provides a D-Bus object
-        * @param[in] objectPath Path of the D-Bus object
-        *
-        * The proxy created this way just references a D-Bus connection owned and managed by the user.
-        * For more information on its behavior, consult @ref createObjectProxy(IConnection&,std::string, std::string)
-        */
-        ProxyInterfaces(IConnection& connection, std::string destination, std::string objectPath)
-            : ObjectHolder<IObjectProxy>(createObjectProxy(connection, std::move(destination), std::move(objectPath)))
-            , _Interfaces(getObject())...
-        {
-            getObject().finishRegistration();
-        }
-
-        /*!
-        * @brief Creates fully working object proxy instance
-        *
-        * @param[in] connection D-Bus connection to be used by the proxy object
-        * @param[in] destination Bus name that provides a D-Bus object
-        * @param[in] objectPath Path of the D-Bus object
-        *
-        * The proxy created this way becomes an owner of the connection.
-        * For more information on its behavior, consult @ref createObjectProxy(std::unique_ptr<sdbus::IConnection>&&,std::string, std::string)
-        */
-        ProxyInterfaces(std::unique_ptr<sdbus::IConnection>&& connection, std::string destination, std::string objectPath)
-            : ObjectHolder<IObjectProxy>(createObjectProxy(std::move(connection), std::move(destination), std::move(objectPath)))
-            , _Interfaces(getObject())...
-        {
-            getObject().finishRegistration();
-        }
-    };
-
-}
-
-#endif /* SDBUS_CXX_INTERFACES_H_ */

include/sdbus-c++/Introspection.h

@@ -1,84 +0,0 @@
-/**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file Introspection.h
- *
- * Created on: Dec 13, 2016
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef SDBUS_CXX_INTROSPECTION_H_
-#define SDBUS_CXX_INTROSPECTION_H_
-
-#include <sdbus-c++/IObject.h>
-#include <sdbus-c++/IObjectProxy.h>
-#include <string>
-
-namespace sdbus {
-
-    // Proxy for introspection
-    class introspectable_proxy
-    {
-        static constexpr const char* interfaceName = "org.freedesktop.DBus.Introspectable";
-
-    protected:
-        introspectable_proxy(sdbus::IObjectProxy& object)
-            : object_(object)
-        {
-        }
-
-    public:
-        std::string Introspect()
-        {
-            std::string xml;
-            object_.callMethod("Introspect").onInterface(interfaceName).storeResultsTo(xml);
-            return xml;
-        }
-
-    private:
-        sdbus::IObjectProxy& object_;
-    };
-
-    // Adaptor is not necessary if we want to rely on sdbus-provided introspection
-//    class introspectable_adaptor
-//    {
-//        static constexpr const char* interfaceName = "org.freedesktop.DBus.Introspectable";
-//
-//    protected:
-//        introspectable_adaptor(sdbus::IObject& object)
-//            : object_(object)
-//        {
-//            object_.registerMethod("Introspect").onInterface(interfaceName).implementedAs([this](){ return object_.introspect(); });
-//        }
-//
-//    public:
-//        std::string introspect()
-//        {
-//            std::string xml;
-//            object_.callMethod("Introspect").onInterface(interfaceName).storeResultsTo(xml);
-//            return xml;
-//        }
-//
-//    private:
-//        sdbus::IObject& object_;
-//    };
-
-}
-
-#endif /* SDBUS_CXX_INTROSPECTION_H_ */

include/sdbus-c++/Message.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Message.h
  *
@@ -35,8 +36,7 @@
 #include <utility>
 #include <cstdint>
 #include <cassert>
-
-#include <iostream>
+#include <functional>
 
 // Forward declarations
 namespace sdbus {
@@ -44,6 +44,7 @@ namespace sdbus {
     class ObjectPath;
     class Signature;
     template <typename... _ValueTypes> class Struct;
+    struct UnixFd;
     class MethodReply;
     namespace internal {
         class ISdBus;
@@ -71,22 +72,12 @@ namespace sdbus {
      * by D-Bus.
      *
      * You don't need to work with this class directly if you use high-level APIs
-     * of @c IObject and @c IObjectProxy.
+     * of @c IObject and @c IProxy.
      *
      ***********************************************/
     class Message
     {
     public:
-        Message() = default;
-        Message(internal::ISdBus* sdbus) noexcept;
-        Message(void *msg, internal::ISdBus* sdbus) noexcept;
-        Message(void *msg, internal::ISdBus* sdbus, adopt_message_t) noexcept;
-        Message(const Message&) noexcept;
-        Message& operator=(const Message&) noexcept;
-        Message(Message&& other) noexcept;
-        Message& operator=(Message&& other) noexcept;
-        ~Message();
-
         Message& operator<<(bool item);
         Message& operator<<(int16_t item);
         Message& operator<<(int32_t item);
@@ -101,6 +92,7 @@ namespace sdbus {
         Message& operator<<(const Variant &item);
         Message& operator<<(const ObjectPath &item);
         Message& operator<<(const Signature &item);
+        Message& operator<<(const UnixFd &item);
 
         Message& operator>>(bool& item);
         Message& operator>>(int16_t& item);
@@ -116,6 +108,7 @@ namespace sdbus {
         Message& operator>>(Variant &item);
         Message& operator>>(ObjectPath &item);
         Message& operator>>(Signature &item);
+        Message& operator>>(UnixFd &item);
 
         Message& openContainer(const std::string& signature);
         Message& closeContainer();
@@ -135,7 +128,7 @@ namespace sdbus {
         Message& enterStruct(const std::string& signature);
         Message& exitStruct();
 
-        operator bool() const;
+        explicit operator bool() const;
         void clearFlags();
 
         std::string getInterfaceName() const;
@@ -148,6 +141,23 @@ namespace sdbus {
         void seal();
         void rewind(bool complete);
 
+        class Factory;
+
+    protected:
+        Message() = default;
+        explicit Message(internal::ISdBus* sdbus) noexcept;
+        Message(void *msg, internal::ISdBus* sdbus) noexcept;
+        Message(void *msg, internal::ISdBus* sdbus, adopt_message_t) noexcept;
+
+        Message(const Message&) noexcept;
+        Message& operator=(const Message&) noexcept;
+        Message(Message&& other) noexcept;
+        Message& operator=(Message&& other) noexcept;
+
+        ~Message();
+
+        friend Factory;
+
     protected:
         void* msg_{};
         internal::ISdBus* sdbus_{};
@@ -156,8 +166,11 @@ namespace sdbus {
 
     class MethodCall : public Message
     {
-    public:
         using Message::Message;
+        friend Factory;
+
+    public:
+        MethodCall() = default;
         MethodReply send() const;
         MethodReply createReply() const;
         MethodReply createErrorReply(const sdbus::Error& error) const;
@@ -171,27 +184,64 @@ namespace sdbus {
 
     class AsyncMethodCall : public Message
     {
-    public:
         using Message::Message;
-        AsyncMethodCall() = default; // Fixes gcc 6.3 error (default c-tor is not imported in above using declaration)
-        AsyncMethodCall(MethodCall&& call) noexcept;
-        void send(void* callback, void* userData) const;
+        friend Factory;
+
+    public:
+        using Slot = std::unique_ptr<void, std::function<void(void*)>>;
+
+        AsyncMethodCall() = default;
+        explicit AsyncMethodCall(MethodCall&& call) noexcept;
+        Slot send(void* callback, void* userData) const;
     };
 
     class MethodReply : public Message
     {
-    public:
         using Message::Message;
+        friend Factory;
+
+    public:
+        MethodReply() = default;
         void send() const;
     };
 
     class Signal : public Message
     {
-    public:
         using Message::Message;
+        friend Factory;
+
+    public:
+        Signal() = default;
         void send() const;
     };
 
+    class PropertySetCall : public Message
+    {
+        using Message::Message;
+        friend Factory;
+
+    public:
+        PropertySetCall() = default;
+    };
+
+    class PropertyGetReply : public Message
+    {
+        using Message::Message;
+        friend Factory;
+
+    public:
+        PropertyGetReply() = default;
+    };
+
+    class PlainMessage : public Message
+    {
+        using Message::Message;
+        friend Factory;
+
+    public:
+        PlainMessage() = default;
+    };
+
     template <typename _Element>
     inline Message& operator<<(Message& msg, const std::vector<_Element>& items)
     {

include/sdbus-c++/MethodResult.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file MethodResult.h
  *

include/sdbus-c++/ProxyInterfaces.h

@@ -0,0 +1,174 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file ProxyInterfaces.h
+ *
+ * Created on: Apr 8, 2019
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDBUS_CXX_PROXYINTERFACES_H_
+#define SDBUS_CXX_PROXYINTERFACES_H_
+
+#include <sdbus-c++/IProxy.h>
+#include <cassert>
+#include <string>
+#include <memory>
+
+// Forward declarations
+namespace sdbus {
+    class IConnection;
+}
+
+namespace sdbus {
+
+    /********************************************//**
+     * @class ProxyObjectHolder
+     *
+     * ProxyObjectHolder is a helper that simply owns and provides
+     * access to a proxy object to other classes in the inheritance
+     * hierarchy of a native-like proxy object based on generated
+     * interface classes.
+     *
+     ***********************************************/
+    class ProxyObjectHolder
+    {
+    protected:
+        ProxyObjectHolder(std::unique_ptr<IProxy>&& proxy)
+            : proxy_(std::move(proxy))
+        {
+            assert(proxy_ != nullptr);
+        }
+
+        const IProxy& getProxy() const
+        {
+            assert(proxy_ != nullptr);
+            return *proxy_;
+        }
+
+        IProxy& getProxy()
+        {
+            assert(proxy_ != nullptr);
+            return *proxy_;
+        }
+
+    private:
+        std::unique_ptr<IProxy> proxy_;
+    };
+
+    /********************************************//**
+     * @class ProxyInterfaces
+     *
+     * ProxyInterfaces is a helper template class that joins all interface classes of a remote
+     * D-Bus object generated by sdbus-c++-xml2cpp to be used on the client (the proxy) side,
+     * including some auxiliary classes. ProxyInterfaces is the class that native-like proxy
+     * implementation classes written by users should inherit from and implement all pure virtual
+     * methods. So the _Interfaces template parameter is a list of sdbus-c++-xml2cpp-generated
+     * proxy-side interface classes representing interfaces of the corresponding remote D-Bus object.
+     *
+     * In the final proxy class inherited from ProxyInterfaces, it is necessary to finish proxy
+     * registration in class constructor (`finishRegistration();`), and, conversely, unregister
+     * the proxy in class destructor (`unregister();`).
+     *
+     ***********************************************/
+    template <typename... _Interfaces>
+    class ProxyInterfaces
+        : protected ProxyObjectHolder
+        , public _Interfaces...
+    {
+    public:
+        /*!
+         * @brief Creates native-like proxy object instance
+         *
+         * @param[in] destination Bus name that provides a D-Bus object
+         * @param[in] objectPath Path of the D-Bus object
+         *
+         * This constructor overload creates a proxy that manages its own D-Bus connection(s).
+         * For more information on its behavior, consult @ref createProxy(std::string,std::string)
+         */
+        ProxyInterfaces(std::string destination, std::string objectPath)
+            : ProxyObjectHolder(createProxy(std::move(destination), std::move(objectPath)))
+            , _Interfaces(getProxy())...
+        {
+        }
+
+        /*!
+         * @brief Creates native-like proxy object instance
+         *
+         * @param[in] connection D-Bus connection to be used by the proxy object
+         * @param[in] destination Bus name that provides a D-Bus object
+         * @param[in] objectPath Path of the D-Bus object
+         *
+         * The proxy created this way just references a D-Bus connection owned and managed by the user.
+         * For more information on its behavior, consult @ref createProxy(IConnection&,std::string,std::string)
+         */
+        ProxyInterfaces(IConnection& connection, std::string destination, std::string objectPath)
+            : ProxyObjectHolder(createProxy(connection, std::move(destination), std::move(objectPath)))
+            , _Interfaces(getProxy())...
+        {
+        }
+
+        /*!
+         * @brief Creates native-like proxy object instance
+         *
+         * @param[in] connection D-Bus connection to be used by the proxy object
+         * @param[in] destination Bus name that provides a D-Bus object
+         * @param[in] objectPath Path of the D-Bus object
+         *
+         * The proxy created this way becomes an owner of the connection.
+         * For more information on its behavior, consult @ref createProxy(std::unique_ptr<sdbus::IConnection>&&,std::string,std::string)
+         */
+        ProxyInterfaces(std::unique_ptr<sdbus::IConnection>&& connection, std::string destination, std::string objectPath)
+            : ProxyObjectHolder(createProxy(std::move(connection), std::move(destination), std::move(objectPath)))
+            , _Interfaces(getProxy())...
+        {
+        }
+
+        /*!
+         * @brief Finishes proxy registration and makes the proxy ready for use
+         *
+         * This function must be called in the constructor of the final proxy class that implements ProxyInterfaces.
+         *
+         * For more information, see underlying @ref IProxy::finishRegistration()
+         */
+        void registerProxy()
+        {
+            getProxy().finishRegistration();
+        }
+
+        /*!
+         * @brief Unregisters the proxy so it no more receives signals and async call replies
+         *
+         * This function must be called in the destructor of the final proxy class that implements ProxyInterfaces.
+         *
+         * See underlying @ref IProxy::unregister()
+         */
+        void unregisterProxy()
+        {
+            getProxy().unregister();
+        }
+
+    protected:
+        using base_type = ProxyInterfaces;
+    };
+
+}
+
+#endif /* SDBUS_CXX_INTERFACES_H_ */

include/sdbus-c++/StandardInterfaces.h

@@ -0,0 +1,262 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file StandardInterfaces.h
+ *
+ * Created on: Dec 13, 2016
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDBUS_CXX_STANDARDINTERFACES_H_
+#define SDBUS_CXX_STANDARDINTERFACES_H_
+
+#include <sdbus-c++/IObject.h>
+#include <sdbus-c++/IProxy.h>
+#include <sdbus-c++/Types.h>
+#include <string>
+#include <map>
+#include <vector>
+
+namespace sdbus {
+
+    // Proxy for peer
+    class Peer_proxy
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.Peer";
+
+    protected:
+        Peer_proxy(sdbus::IProxy& proxy)
+            : proxy_(proxy)
+        {
+        }
+
+        ~Peer_proxy() = default;
+
+    public:
+        void Ping()
+        {
+            proxy_.callMethod("Ping").onInterface(INTERFACE_NAME);
+        }
+
+        std::string GetMachineId()
+        {
+            std::string machineUUID;
+            proxy_.callMethod("GetMachineId").onInterface(INTERFACE_NAME).storeResultsTo(machineUUID);
+            return machineUUID;
+        }
+
+    private:
+        sdbus::IProxy& proxy_;
+    };
+
+    // Proxy for introspection
+    class Introspectable_proxy
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.Introspectable";
+
+    protected:
+        Introspectable_proxy(sdbus::IProxy& proxy)
+            : proxy_(proxy)
+        {
+        }
+
+        ~Introspectable_proxy() = default;
+
+    public:
+        std::string Introspect()
+        {
+            std::string xml;
+            proxy_.callMethod("Introspect").onInterface(INTERFACE_NAME).storeResultsTo(xml);
+            return xml;
+        }
+
+    private:
+        sdbus::IProxy& proxy_;
+    };
+
+    // Proxy for properties
+    class Properties_proxy
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.Properties";
+
+    protected:
+        Properties_proxy(sdbus::IProxy& proxy)
+            : proxy_(proxy)
+        {
+            proxy_
+                .uponSignal("PropertiesChanged")
+                .onInterface(INTERFACE_NAME)
+                .call([this]( const std::string& interfaceName
+                            , const std::map<std::string, sdbus::Variant>& changedProperties
+                            , const std::vector<std::string>& invalidatedProperties )
+                            {
+                                this->onPropertiesChanged(interfaceName, changedProperties, invalidatedProperties);
+                            });
+        }
+
+        ~Properties_proxy() = default;
+
+        virtual void onPropertiesChanged( const std::string& interfaceName
+                                        , const std::map<std::string, sdbus::Variant>& changedProperties
+                                        , const std::vector<std::string>& invalidatedProperties ) = 0;
+
+    public:
+        sdbus::Variant Get(const std::string& interfaceName, const std::string& propertyName)
+        {
+            return proxy_.getProperty(propertyName).onInterface(interfaceName);
+        }
+
+        void Set(const std::string& interfaceName, const std::string& propertyName, const sdbus::Variant& value)
+        {
+            proxy_.setProperty(propertyName).onInterface(interfaceName).toValue(value);
+        }
+
+        std::map<std::string, sdbus::Variant> GetAll(const std::string& interfaceName)
+        {
+            std::map<std::string, sdbus::Variant> props;
+            proxy_.callMethod("GetAll").onInterface(INTERFACE_NAME).withArguments(interfaceName).storeResultsTo(props);
+            return props;
+        }
+
+    private:
+        sdbus::IProxy& proxy_;
+    };
+
+    // Proxy for object manager
+    class ObjectManager_proxy
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.ObjectManager";
+
+    protected:
+        ObjectManager_proxy(sdbus::IProxy& proxy)
+            : proxy_(proxy)
+        {
+            proxy_
+                .uponSignal("InterfacesAdded")
+                .onInterface(INTERFACE_NAME)
+                .call([this]( const sdbus::ObjectPath& objectPath
+                            , const std::map<std::string, std::map<std::string, sdbus::Variant>>& interfacesAndProperties )
+                            {
+                                this->onInterfacesAdded(objectPath, interfacesAndProperties);
+                            });
+
+            proxy_
+                .uponSignal("InterfacesRemoved")
+                .onInterface(INTERFACE_NAME)
+                .call([this]( const sdbus::ObjectPath& objectPath
+                            , const std::vector<std::string>& interfaces )
+                            {
+                                this->onInterfacesRemoved(objectPath, interfaces);
+                            });
+        }
+
+        ~ObjectManager_proxy() = default;
+
+        virtual void onInterfacesAdded( const sdbus::ObjectPath& objectPath
+                                      , const std::map<std::string, std::map<std::string, sdbus::Variant>>& interfacesAndProperties) = 0;
+        virtual void onInterfacesRemoved( const sdbus::ObjectPath& objectPath
+                                        , const std::vector<std::string>& interfaces) = 0;
+
+    public:
+        std::map<sdbus::ObjectPath, std::map<std::string, std::map<std::string, sdbus::Variant>>> GetManagedObjects()
+        {
+            std::map<sdbus::ObjectPath, std::map<std::string, std::map<std::string, sdbus::Variant>>> objectsInterfacesAndProperties;
+            proxy_.callMethod("GetManagedObjects").onInterface(INTERFACE_NAME).storeResultsTo(objectsInterfacesAndProperties);
+            return objectsInterfacesAndProperties;
+        }
+
+    private:
+        sdbus::IProxy& proxy_;
+    };
+
+    // Adaptors for the above-listed standard D-Bus interfaces are not necessary because the functionality
+    // is provided by underlying libsystemd implementation. The exception is Properties_adaptor and
+    // ObjectManager_adaptor, which provide convenience functionality to emit signals.
+
+    // Adaptor for properties
+    class Properties_adaptor
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.Properties";
+
+    protected:
+        Properties_adaptor(sdbus::IObject& object)
+            : object_(object)
+        {
+        }
+
+        ~Properties_adaptor() = default;
+
+    public:
+        void emitPropertiesChangedSignal(const std::string& interfaceName, const std::vector<std::string>& properties)
+        {
+            object_.emitPropertiesChangedSignal(interfaceName, properties);
+        }
+
+        void emitPropertiesChangedSignal(const std::string& interfaceName)
+        {
+            object_.emitPropertiesChangedSignal(interfaceName);
+        }
+
+    private:
+        sdbus::IObject& object_;
+    };
+
+    // Adaptor for object manager
+    class ObjectManager_adaptor
+    {
+        static constexpr const char* INTERFACE_NAME = "org.freedesktop.DBus.ObjectManager";
+
+    protected:
+        ObjectManager_adaptor(sdbus::IObject& object)
+            : object_(object)
+        {
+            object_.addObjectManager();
+        }
+
+        ~ObjectManager_adaptor() = default;
+
+    public:
+        void emitInterfacesAddedSignal()
+        {
+            object_.emitInterfacesAddedSignal();
+        }
+
+        void emitInterfacesAddedSignal(const std::vector<std::string>& interfaces)
+        {
+            object_.emitInterfacesAddedSignal(interfaces);
+        }
+
+        void emitInterfacesRemovedSignal()
+        {
+            object_.emitInterfacesRemovedSignal();
+        }
+
+        void emitInterfacesRemovedSignal(const std::vector<std::string>& interfaces)
+        {
+            object_.emitInterfacesRemovedSignal(interfaces);
+        }
+
+    private:
+        sdbus::IObject& object_;
+    };
+
+}
+
+#endif /* SDBUS_CXX_STANDARDINTERFACES_H_ */

include/sdbus-c++/TypeTraits.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file TypeTraits.h
  *
@@ -40,10 +41,12 @@ namespace sdbus {
     template <typename... _ValueTypes> class Struct;
     class ObjectPath;
     class Signature;
-    class Message;
+    struct UnixFd;
     class MethodCall;
     class MethodReply;
     class Signal;
+    class PropertySetCall;
+    class PropertyGetReply;
     template <typename... _Results> class Result;
     class Error;
 }
@@ -53,8 +56,8 @@ namespace sdbus {
     using method_callback = std::function<void(MethodCall msg)>;
     using async_reply_handler = std::function<void(MethodReply& reply, const Error* error)>;
     using signal_handler = std::function<void(Signal& signal)>;
-    using property_set_callback = std::function<void(Message& msg)>;
-    using property_get_callback = std::function<void(Message& reply)>;
+    using property_set_callback = std::function<void(PropertySetCall& msg)>;
+    using property_get_callback = std::function<void(PropertyGetReply& reply)>;
 
     template <typename _T>
     struct signature_of
@@ -285,6 +288,17 @@ namespace sdbus {
         }
     };
 
+    template <>
+    struct signature_of<UnixFd>
+    {
+        static constexpr bool is_valid = true;
+
+        static const std::string str()
+        {
+            return "h";
+        }
+    };
+
     template <typename _Element>
     struct signature_of<std::vector<_Element>>
     {

include/sdbus-c++/Types.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Types.h
  *
@@ -33,6 +34,7 @@
 #include <typeinfo>
 #include <memory>
 #include <tuple>
+#include <unistd.h>
 
 namespace sdbus {
 
@@ -94,9 +96,15 @@ namespace sdbus {
         std::string peekValueType() const;
 
     private:
-        mutable Message msg_{};
+        mutable PlainMessage msg_{};
     };
 
+    /********************************************//**
+     * @class Struct
+     *
+     * Representation of struct D-Bus type
+     *
+     ***********************************************/
     template <typename... _ValueTypes>
     class Struct
         : public std::tuple<_ValueTypes...>
@@ -135,6 +143,12 @@ namespace sdbus {
         return result_type(std::forward<_Elements>(args)...);
     }
 
+    /********************************************//**
+     * @class ObjectPath
+     *
+     * Representation of object path D-Bus type
+     *
+     ***********************************************/
     class ObjectPath : public std::string
     {
     public:
@@ -146,6 +160,12 @@ namespace sdbus {
         using std::string::operator=;
     };
 
+    /********************************************//**
+     * @class Signature
+     *
+     * Representation of Signature D-Bus type
+     *
+     ***********************************************/
     class Signature : public std::string
     {
     public:
@@ -157,6 +177,106 @@ namespace sdbus {
         using std::string::operator=;
     };
 
+    struct adopt_fd_t { explicit adopt_fd_t() = default; };
+#ifdef __cpp_inline_variables
+    inline constexpr adopt_fd_t adopt_fd{};
+#else
+    constexpr adopt_fd_t adopt_fd{};
+#endif
+
+    /********************************************//**
+     * @struct UnixFd
+     *
+     * UnixFd is a representation of file descriptor D-Bus type that owns
+     * the underlying fd, provides access to it, and closes the fd when
+     * the UnixFd goes out of scope.
+     *
+     * UnixFd can be default constructed (owning invalid fd), or constructed from
+     * an explicitly provided fd by either duplicating or adopting that fd as-is.
+     *
+     ***********************************************/
+    class UnixFd
+    {
+    public:
+        UnixFd() = default;
+
+        explicit UnixFd(int fd)
+            : fd_(::dup(fd))
+        {
+        }
+
+        UnixFd(int fd, adopt_fd_t)
+            : fd_(fd)
+        {
+        }
+
+        UnixFd(const UnixFd& other)
+        {
+            *this = other;
+        }
+
+        UnixFd& operator=(const UnixFd& other)
+        {
+            close();
+            fd_ = ::dup(other.fd_);
+            return *this;
+        }
+
+        UnixFd(UnixFd&& other)
+        {
+            *this = std::move(other);
+        }
+
+        UnixFd& operator=(UnixFd&& other)
+        {
+            close();
+            fd_ = other.fd_;
+            other.fd_ = -1;
+            return *this;
+        }
+
+        ~UnixFd()
+        {
+            close();
+        }
+
+        int get() const
+        {
+            return fd_;
+        }
+
+        void reset(int fd = -1)
+        {
+            *this = UnixFd{fd};
+        }
+
+        void reset(int fd, adopt_fd_t)
+        {
+            *this = UnixFd{fd, adopt_fd};
+        }
+
+        int release()
+        {
+            auto fd = fd_;
+            fd_ = -1;
+            return fd;
+        }
+
+        bool isValid() const
+        {
+            return fd_ >= 0;
+        }
+
+    private:
+        void close()
+        {
+            if (fd_ >= 0)
+                ::close(fd_);
+        }
+
+        int fd_ = -1;
+    };
+
 }
 
 #endif /* SDBUS_CXX_TYPES_H_ */

include/sdbus-c++/sdbus-c++.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file sdbus-c++.h
  *
@@ -25,11 +26,13 @@
 
 #include <sdbus-c++/IConnection.h>
 #include <sdbus-c++/IObject.h>
-#include <sdbus-c++/IObjectProxy.h>
-#include <sdbus-c++/Interfaces.h>
+#include <sdbus-c++/IProxy.h>
+#include <sdbus-c++/AdaptorInterfaces.h>
+#include <sdbus-c++/ProxyInterfaces.h>
+#include <sdbus-c++/StandardInterfaces.h>
 #include <sdbus-c++/Message.h>
 #include <sdbus-c++/MethodResult.h>
 #include <sdbus-c++/Types.h>
 #include <sdbus-c++/TypeTraits.h>
-#include <sdbus-c++/Introspection.h>
 #include <sdbus-c++/Error.h>
+#include <sdbus-c++/Flags.h>

sdbus-c++-config.cmake.in

@@ -1,14 +0,0 @@
-# Config file for the sdbus-c++ package.
-#
-# It defines the following variables:
-#  SDBUSCPP_VERSION      - version of sdbus-c++
-#  SDBUSCPP_FOUND        - set to true
-#  SDBUSCPP_INCLUDE_DIRS - include directories for sdbus-c++
-#  SDBUSCPP_LIBRARY_DIR  - library directories for sdbus-c++
-#  SDBUSCPP_LIBRARIES    - libraries to link against
-
-set(SDBUSCPP_VERSION "@SDBUSCPP_VERSION@")
-set(SDBUSCPP_FOUND "TRUE")
-set(SDBUSCPP_INCLUDE_DIRS "@CMAKE_INSTALL_FULL_INCLUDEDIR@")
-set(SDBUSCPP_LIBRARY_DIR "@CMAKE_INSTALL_FULL_LIBDIR@")
-set(SDBUSCPP_LIBRARIES sdbus-c++)

src/Connection.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Connection.cpp
  *
@@ -25,6 +26,7 @@
 
 #include "Connection.h"
 #include "SdBus.h"
+#include "MessageUtils.h"
 #include <sdbus-c++/Message.h>
 #include <sdbus-c++/Error.h>
 #include "ScopeGuard.h"
@@ -33,6 +35,19 @@
 #include <poll.h>
 #include <sys/eventfd.h>
 
+namespace {
+
+std::vector</*const */char*> to_strv(const std::vector<std::string>& strings)
+{
+    std::vector</*const */char*> strv;
+    for (auto& str : strings)
+        strv.push_back(const_cast<char*>(str.c_str()));
+    strv.push_back(nullptr);
+    return strv;
+}
+
+}
+
 namespace sdbus { namespace internal {
 
 Connection::Connection(Connection::BusType type, std::unique_ptr<ISdBus>&& interface)
@@ -103,10 +118,28 @@ ISdBus& Connection::getSdBusInterface()
     return *iface_.get();
 }
 
-sd_bus_slot* Connection::addObjectVTable( const std::string& objectPath
-                                        , const std::string& interfaceName
-                                        , const sd_bus_vtable* vtable
-                                        , void* userData )
+void Connection::addObjectManager(const std::string& objectPath)
+{
+    Connection::addObjectManager(objectPath, nullptr);
+}
+
+SlotPtr Connection::addObjectManager(const std::string& objectPath, void* /*dummy*/)
+{
+    sd_bus_slot *slot{};
+
+    auto r = iface_->sd_bus_add_object_manager( bus_.get()
+                                              , &slot
+                                              , objectPath.c_str() );
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to add object manager", -r);
+
+    return {slot, [this](void *slot){ iface_->sd_bus_slot_unref((sd_bus_slot*)slot); }};
+}
+
+SlotPtr Connection::addObjectVTable( const std::string& objectPath
+                                   , const std::string& interfaceName
+                                   , const sd_bus_vtable* vtable
+                                   , void* userData )
 {
     sd_bus_slot *slot{};
 
@@ -119,12 +152,7 @@ sd_bus_slot* Connection::addObjectVTable( const std::string& objectPath
 
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to register object vtable", -r);
 
-    return slot;
-}
-
-void Connection::removeObjectVTable(sd_bus_slot* vtableHandle)
-{
-    iface_->sd_bus_slot_unref(vtableHandle);
+    return {slot, [this](void *slot){ iface_->sd_bus_slot_unref((sd_bus_slot*)slot); }};
 }
 
 MethodCall Connection::createMethodCall( const std::string& destination
@@ -143,7 +171,7 @@ MethodCall Connection::createMethodCall( const std::string& destination
 
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to create method call", -r);
 
-    return MethodCall{sdbusMsg, iface_.get(), adopt_message};
+    return Message::Factory::create<MethodCall>(sdbusMsg, iface_.get(), adopt_message);
 }
 
 Signal Connection::createSignal( const std::string& objectPath
@@ -160,14 +188,66 @@ Signal Connection::createSignal( const std::string& objectPath
 
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to create signal", -r);
 
-    return Signal{sdbusSignal, iface_.get(), adopt_message};
+    return Message::Factory::create<Signal>(sdbusSignal, iface_.get(), adopt_message);
 }
 
-sd_bus_slot* Connection::registerSignalHandler( const std::string& objectPath
-                                              , const std::string& interfaceName
-                                              , const std::string& signalName
-                                              , sd_bus_message_handler_t callback
-                                              , void* userData )
+void Connection::emitPropertiesChangedSignal( const std::string& objectPath
+                                            , const std::string& interfaceName
+                                            , const std::vector<std::string>& propNames )
+{
+    auto names = to_strv(propNames);
+
+    auto r = iface_->sd_bus_emit_properties_changed_strv( bus_.get()
+                                                        , objectPath.c_str()
+                                                        , interfaceName.c_str()
+                                                        , propNames.empty() ? nullptr : &names[0] );
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit PropertiesChanged signal", -r);
+}
+
+void Connection::emitInterfacesAddedSignal(const std::string& objectPath)
+{
+    auto r = iface_->sd_bus_emit_object_added(bus_.get(), objectPath.c_str());
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit InterfacesAdded signal for all registered interfaces", -r);
+}
+
+void Connection::emitInterfacesAddedSignal( const std::string& objectPath
+                                          , const std::vector<std::string>& interfaces )
+{
+    auto names = to_strv(interfaces);
+
+    auto r = iface_->sd_bus_emit_interfaces_added_strv( bus_.get()
+                                                      , objectPath.c_str()
+                                                      , interfaces.empty() ? nullptr : &names[0] );
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit InterfacesAdded signal", -r);
+}
+
+void Connection::emitInterfacesRemovedSignal(const std::string& objectPath)
+{
+    auto r = iface_->sd_bus_emit_object_removed(bus_.get(), objectPath.c_str());
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit InterfacesRemoved signal for all registered interfaces", -r);
+}
+
+void Connection::emitInterfacesRemovedSignal( const std::string& objectPath
+                                            , const std::vector<std::string>& interfaces )
+{
+    auto names = to_strv(interfaces);
+
+    auto r = iface_->sd_bus_emit_interfaces_removed_strv( bus_.get()
+                                                        , objectPath.c_str()
+                                                        , interfaces.empty() ? nullptr : &names[0] );
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit InterfacesRemoved signal", -r);
+}
+
+SlotPtr Connection::registerSignalHandler( const std::string& objectPath
+                                         , const std::string& interfaceName
+                                         , const std::string& signalName
+                                         , sd_bus_message_handler_t callback
+                                         , void* userData )
 {
     sd_bus_slot *slot{};
 
@@ -176,12 +256,7 @@ sd_bus_slot* Connection::registerSignalHandler( const std::string& objectPath
 
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to register signal handler", -r);
 
-    return slot;
-}
-
-void Connection::unregisterSignalHandler(sd_bus_slot* handlerCookie)
-{
-    iface_->sd_bus_slot_unref(handlerCookie);
+    return {slot, [this](void *slot){ iface_->sd_bus_slot_unref((sd_bus_slot*)slot); }};
 }
 
 sd_bus* Connection::openBus(Connection::BusType type)

src/Connection.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Connection.h
  *
@@ -57,29 +58,41 @@ namespace sdbus { namespace internal {
         void enterProcessingLoopAsync() override;
         void leaveProcessingLoop() override;
 
+        void addObjectManager(const std::string& objectPath) override;
+        SlotPtr addObjectManager(const std::string& objectPath, void* /*dummy*/) override;
+
         const ISdBus& getSdBusInterface() const override;
         ISdBus& getSdBusInterface() override;
 
-        sd_bus_slot* addObjectVTable( const std::string& objectPath
-                                    , const std::string& interfaceName
-                                    , const sd_bus_vtable* vtable
-                                    , void* userData ) override;
-        void removeObjectVTable(sd_bus_slot* vtableHandle) override;
+        SlotPtr addObjectVTable( const std::string& objectPath
+                               , const std::string& interfaceName
+                               , const sd_bus_vtable* vtable
+                               , void* userData ) override;
 
         MethodCall createMethodCall( const std::string& destination
                                    , const std::string& objectPath
                                    , const std::string& interfaceName
                                    , const std::string& methodName ) const override;
+
         Signal createSignal( const std::string& objectPath
                            , const std::string& interfaceName
                            , const std::string& signalName ) const override;
 
-        sd_bus_slot* registerSignalHandler( const std::string& objectPath
-                                          , const std::string& interfaceName
-                                          , const std::string& signalName
-                                          , sd_bus_message_handler_t callback
-                                          , void* userData ) override;
-        void unregisterSignalHandler(sd_bus_slot* handlerCookie) override;
+        void emitPropertiesChangedSignal( const std::string& objectPath
+                                        , const std::string& interfaceName
+                                        , const std::vector<std::string>& propNames ) override;
+        void emitInterfacesAddedSignal(const std::string& objectPath) override;
+        void emitInterfacesAddedSignal( const std::string& objectPath
+                                      , const std::vector<std::string>& interfaces ) override;
+        void emitInterfacesRemovedSignal(const std::string& objectPath) override;
+        void emitInterfacesRemovedSignal( const std::string& objectPath
+                                        , const std::vector<std::string>& interfaces ) override;
+
+        SlotPtr registerSignalHandler( const std::string& objectPath
+                                     , const std::string& interfaceName
+                                     , const std::string& signalName
+                                     , sd_bus_message_handler_t callback
+                                     , void* userData ) override;
 
     private:
         sd_bus* openBus(Connection::BusType type);

src/ConvenienceApiClasses.cpp

@@ -1,7 +1,8 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
- * @file ConvenienceClasses.cpp
+ * @file ConvenienceApiClasses.cpp
  *
  * Created on: Jan 19, 2017
  * Project: sdbus-c++
@@ -23,9 +24,9 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <sdbus-c++/ConvenienceClasses.h>
-#include <sdbus-c++/IObject.h>
-#include <sdbus-c++/IObjectProxy.h>
+#include "sdbus-c++/ConvenienceApiClasses.h"
+#include "sdbus-c++/IObject.h"
+#include "sdbus-c++/IProxy.h"
 #include <string>
 #include <exception>
 
@@ -177,8 +178,8 @@ SignalEmitter::~SignalEmitter() noexcept(false) // since C++11, destructors must
 }
 
 
-MethodInvoker::MethodInvoker(IObjectProxy& objectProxy, const std::string& methodName)
-    : objectProxy_(objectProxy)
+MethodInvoker::MethodInvoker(IProxy& proxy, const std::string& methodName)
+    : proxy_(proxy)
     , methodName_(methodName)
     , exceptions_(std::uncaught_exceptions()) // Needs C++17
 {
@@ -202,7 +203,7 @@ MethodInvoker::~MethodInvoker() noexcept(false) // since C++11, destructors must
     // Therefore, we can allow callMethod() to throw even if we are in the destructor.
     // Bottomline is, to be on the safe side, the caller must take care of catching and reacting
     // to the exception thrown from here if the caller is a destructor itself.
-    objectProxy_.callMethod(method_);
+    proxy_.callMethod(method_);
 }
 
 }

src/Error.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Error.cpp
  *

src/Flags.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Flags.cpp
  *

src/IConnection.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file IConnection.h
  *
@@ -29,6 +30,8 @@
 #include <systemd/sd-bus.h>
 #include <string>
 #include <memory>
+#include <functional>
+#include <vector>
 
 // Forward declaration
 namespace sdbus {
@@ -44,17 +47,20 @@ namespace sdbus {
 namespace sdbus {
 namespace internal {
 
+    using SlotPtr = std::unique_ptr<void, std::function<void(void*)>>;
+
     class IConnection
     {
     public:
+        virtual ~IConnection() = default;
+
         virtual const ISdBus& getSdBusInterface() const = 0;
         virtual ISdBus& getSdBusInterface() = 0;
 
-        virtual sd_bus_slot* addObjectVTable( const std::string& objectPath
-                                            , const std::string& interfaceName
-                                            , const sd_bus_vtable* vtable
-                                            , void* userData ) = 0;
-        virtual void removeObjectVTable(sd_bus_slot* vtableHandle) = 0;
+        virtual SlotPtr addObjectVTable( const std::string& objectPath
+                                       , const std::string& interfaceName
+                                       , const sd_bus_vtable* vtable
+                                       , void* userData ) = 0;
 
         virtual MethodCall createMethodCall( const std::string& destination
                                            , const std::string& objectPath
@@ -65,17 +71,26 @@ namespace internal {
                                    , const std::string& interfaceName
                                    , const std::string& signalName ) const = 0;
 
-        virtual sd_bus_slot* registerSignalHandler( const std::string& objectPath
-                                                  , const std::string& interfaceName
-                                                  , const std::string& signalName
-                                                  , sd_bus_message_handler_t callback
-                                                  , void* userData ) = 0;
-        virtual void unregisterSignalHandler(sd_bus_slot* handlerCookie) = 0;
+        virtual void emitPropertiesChangedSignal( const std::string& objectPath
+                                                , const std::string& interfaceName
+                                                , const std::vector<std::string>& propNames ) = 0;
+        virtual void emitInterfacesAddedSignal(const std::string& objectPath) = 0;
+        virtual void emitInterfacesAddedSignal( const std::string& objectPath
+                                              , const std::vector<std::string>& interfaces ) = 0;
+        virtual void emitInterfacesRemovedSignal(const std::string& objectPath) = 0;
+        virtual void emitInterfacesRemovedSignal( const std::string& objectPath
+                                                , const std::vector<std::string>& interfaces ) = 0;
+
+        virtual SlotPtr addObjectManager(const std::string& objectPath, void* /*dummy*/ = nullptr) = 0;
+
+        virtual SlotPtr registerSignalHandler( const std::string& objectPath
+                                             , const std::string& interfaceName
+                                             , const std::string& signalName
+                                             , sd_bus_message_handler_t callback
+                                             , void* userData ) = 0;
 
         virtual void enterProcessingLoopAsync() = 0;
         virtual void leaveProcessingLoop() = 0;
-
-        virtual ~IConnection() = default;
     };
 
 }

src/ISdBus.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file ISdBus.h
  * @author Ardazishvili Roman (ardazishvili.roman@yandex.ru)
@@ -53,11 +54,18 @@ namespace sdbus { namespace internal {
         virtual int sd_bus_message_new_method_return(sd_bus_message *call, sd_bus_message **m) = 0;
         virtual int sd_bus_message_new_method_error(sd_bus_message *call, sd_bus_message **m, const sd_bus_error *e) = 0;
 
+        virtual int sd_bus_emit_properties_changed_strv(sd_bus *bus, const char *path, const char *interface, char **names) = 0;
+        virtual int sd_bus_emit_object_added(sd_bus *bus, const char *path) = 0;
+        virtual int sd_bus_emit_object_removed(sd_bus *bus, const char *path) = 0;
+        virtual int sd_bus_emit_interfaces_added_strv(sd_bus *bus, const char *path, char **interfaces) = 0;
+        virtual int sd_bus_emit_interfaces_removed_strv(sd_bus *bus, const char *path, char **interfaces) = 0;
+
         virtual int sd_bus_open_user(sd_bus **ret) = 0;
         virtual int sd_bus_open_system(sd_bus **ret) = 0;
         virtual int sd_bus_request_name(sd_bus *bus, const char *name, uint64_t flags) = 0;
         virtual int sd_bus_release_name(sd_bus *bus, const char *name) = 0;
         virtual int sd_bus_add_object_vtable(sd_bus *bus, sd_bus_slot **slot, const char *path, const char *interface, const sd_bus_vtable *vtable, void *userdata) = 0;
+        virtual int sd_bus_add_object_manager(sd_bus *bus, sd_bus_slot **slot, const char *path) = 0;
         virtual int sd_bus_add_match(sd_bus *bus, sd_bus_slot **slot, const char *match, sd_bus_message_handler_t callback, void *userdata) = 0;
         virtual sd_bus_slot* sd_bus_slot_unref(sd_bus_slot *slot) = 0;
 

src/Message.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Message.cpp
  *
@@ -210,7 +211,16 @@ Message& Message::operator<<(const ObjectPath &item)
 Message& Message::operator<<(const Signature &item)
 {
     auto r = sd_bus_message_append_basic((sd_bus_message*)msg_, SD_BUS_TYPE_SIGNATURE, item.c_str());
-    SDBUS_THROW_ERROR_IF(r < 0, "Failed to serialize an Signature value", -r);
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to serialize a Signature value", -r);
+
+    return *this;
+}
+
+Message& Message::operator<<(const UnixFd &item)
+{
+    auto fd = item.get();
+    auto r = sd_bus_message_append_basic((sd_bus_message*)msg_, SD_BUS_TYPE_UNIX_FD, &fd);
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to serialize a UnixFd value", -r);
 
     return *this;
 }
@@ -383,6 +393,20 @@ Message& Message::operator>>(Signature &item)
     return *this;
 }
 
+Message& Message::operator>>(UnixFd &item)
+{
+    int fd = -1;
+    auto r = sd_bus_message_read_basic((sd_bus_message*)msg_, SD_BUS_TYPE_UNIX_FD, &fd);
+    if (r == 0)
+        ok_ = false;
+
+    SDBUS_THROW_ERROR_IF(r < 0, "Failed to deserialize a UnixFd value", -r);
+
+    item.reset(fd);
+
+    return *this;
+}
+
 
 Message& Message::openContainer(const std::string& signature)
 {
@@ -583,7 +607,7 @@ bool Message::isValid() const
 
 bool Message::isEmpty() const
 {
-    return sd_bus_message_is_empty((sd_bus_message*)msg_);
+    return sd_bus_message_is_empty((sd_bus_message*)msg_) != 0;
 }
 
 void MethodCall::dontExpectReply()
@@ -596,7 +620,7 @@ bool MethodCall::doesntExpectReply() const
 {
     auto r = sd_bus_message_get_expect_reply((sd_bus_message*)msg_);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to get the dont-expect-reply flag", -r);
-    return r > 0 ? false : true;
+    return r == 0;
 }
 
 MethodReply MethodCall::send() const
@@ -620,7 +644,7 @@ MethodReply MethodCall::sendWithReply() const
 
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to call method", -r);
 
-    return MethodReply{sdbusReply, sdbus_, adopt_message};
+    return Factory::create<MethodReply>(sdbusReply, sdbus_, adopt_message);
 }
 
 MethodReply MethodCall::sendWithNoReply() const
@@ -628,7 +652,7 @@ MethodReply MethodCall::sendWithNoReply() const
     auto r = sdbus_->sd_bus_send(nullptr, (sd_bus_message*)msg_, nullptr);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to call method with no reply", -r);
 
-    return MethodReply{}; // No reply
+    return Factory::create<MethodReply>(); // No reply
 }
 
 MethodReply MethodCall::createReply() const
@@ -637,7 +661,7 @@ MethodReply MethodCall::createReply() const
     auto r = sdbus_->sd_bus_message_new_method_return((sd_bus_message*)msg_, &sdbusReply);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to create method reply", -r);
 
-    return MethodReply{sdbusReply, sdbus_, adopt_message};
+    return Factory::create<MethodReply>(sdbusReply, sdbus_, adopt_message);
 }
 
 MethodReply MethodCall::createErrorReply(const Error& error) const
@@ -650,7 +674,7 @@ MethodReply MethodCall::createErrorReply(const Error& error) const
     auto r = sdbus_->sd_bus_message_new_method_error((sd_bus_message*)msg_, &sdbusErrorReply, &sdbusError);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to create method error reply", -r);
 
-    return MethodReply{sdbusErrorReply, sdbus_, adopt_message};
+    return Factory::create<MethodReply>(sdbusErrorReply, sdbus_, adopt_message);
 }
 
 AsyncMethodCall::AsyncMethodCall(MethodCall&& call) noexcept
@@ -658,10 +682,14 @@ AsyncMethodCall::AsyncMethodCall(MethodCall&& call) noexcept
 {
 }
 
-void AsyncMethodCall::send(void* callback, void* userData) const
+AsyncMethodCall::Slot AsyncMethodCall::send(void* callback, void* userData) const
 {
-    auto r = sdbus_->sd_bus_call_async(nullptr, nullptr, (sd_bus_message*)msg_, (sd_bus_message_handler_t)callback, userData, 0);
+    sd_bus_slot* slot;
+
+    auto r = sdbus_->sd_bus_call_async(nullptr, &slot, (sd_bus_message*)msg_, (sd_bus_message_handler_t)callback, userData, 0);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to call method asynchronously", -r);
+
+    return Slot{slot, [sdbus_ = sdbus_](void *slot){ sdbus_->sd_bus_slot_unref((sd_bus_slot*)slot); }};
 }
 
 void MethodReply::send() const
@@ -676,10 +704,21 @@ void Signal::send() const
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to emit signal", -r);
 }
 
-Message createPlainMessage()
+PlainMessage createPlainMessage()
 {
     int r;
 
+    // All references to the bus (like created messages) must not outlive this thread (because messages refer to sdbus
+    // which is thread-local, and because BusReferenceKeeper below destroys the bus at thread exit).
+    // A more flexible solution would be that the caller would already provide an ISdBus reference as a parameter.
+    // Variant is one of the callers. This means Variant could no more be created in a stand-alone way, but
+    // through a factory of some existing facility (Object, Proxy, Connection...).
+    // TODO: Consider this alternative of creating Variant, it may live next to the current one. This function would
+    // get IConnection* parameter and IConnection would provide createPlainMessage factory (just like it already
+    // provides e.g. createMethodCall). If this parameter were null, the current mechanism would be used.
+
+    thread_local internal::SdBus sdbus;
+
     sd_bus* bus{};
     SCOPE_EXIT{ sd_bus_unref(bus); };
     r = sd_bus_default_system(&bus);
@@ -687,18 +726,22 @@ Message createPlainMessage()
 
     thread_local struct BusReferenceKeeper
     {
-        BusReferenceKeeper(sd_bus* bus) : bus_(bus) {}
-        ~BusReferenceKeeper() { sd_bus_unref(bus_); }
+        explicit BusReferenceKeeper(sd_bus* bus) : bus_(sd_bus_ref(bus)) { sd_bus_flush(bus_); }
+        ~BusReferenceKeeper() { sd_bus_flush_close_unref(bus_); }
         sd_bus* bus_{};
     } busReferenceKeeper{bus};
 
+    // Shelved here as handy thing for potential future tracing purposes:
+    //#include <unistd.h>
+    //#include <sys/syscall.h>
+    //#define gettid() syscall(SYS_gettid)
+    //printf("createPlainMessage: sd_bus*=[%p], n_ref=[%d], TID=[%d]\n", bus, *(unsigned*)bus, gettid());
+
     sd_bus_message* sdbusMsg{};
     r = sd_bus_message_new(bus, &sdbusMsg, _SD_BUS_MESSAGE_TYPE_INVALID);
     SDBUS_THROW_ERROR_IF(r < 0, "Failed to create a new message", -r);
 
-    thread_local internal::SdBus sdbus;
-
-    return Message{sdbusMsg, &sdbus, adopt_message};
+    return Message::Factory::create<PlainMessage>(sdbusMsg, &sdbus, adopt_message);
 }
 
 }

src/MessageUtils.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file MessageUtils.h
  *
@@ -30,7 +31,35 @@
 
 namespace sdbus
 {
-    Message createPlainMessage();
+    class Message::Factory
+    {
+    public:
+        template<typename _Msg>
+        static _Msg create()
+        {
+            return _Msg{};
+        }
+
+        template<typename _Msg>
+        static _Msg create(void *msg)
+        {
+            return _Msg{msg};
+        }
+
+        template<typename _Msg>
+        static _Msg create(void *msg, internal::ISdBus* sdbus)
+        {
+            return _Msg{msg, sdbus};
+        }
+
+        template<typename _Msg>
+        static _Msg create(void *msg, internal::ISdBus* sdbus, adopt_message_t)
+        {
+            return _Msg{msg, sdbus, adopt_message};
+        }
+    };
+
+    PlainMessage createPlainMessage();
 }
 
 #endif /* SDBUS_CXX_INTERNAL_MESSAGEUTILS_H_ */

src/Object.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Object.cpp
  *
@@ -24,6 +25,7 @@
  */
 
 #include "Object.h"
+#include "MessageUtils.h"
 #include <sdbus-c++/IConnection.h>
 #include <sdbus-c++/Message.h>
 #include <sdbus-c++/Error.h>
@@ -120,6 +122,11 @@ void Object::finishRegistration()
     }
 }
 
+void Object::unregister()
+{
+    interfaces_.clear();
+}
+
 sdbus::Signal Object::createSignal(const std::string& interfaceName, const std::string& signalName)
 {
     return connection_.createSignal(objectPath_, interfaceName, signalName);
@@ -130,6 +137,51 @@ void Object::emitSignal(const sdbus::Signal& message)
     message.send();
 }
 
+void Object::emitPropertiesChangedSignal(const std::string& interfaceName, const std::vector<std::string>& propNames)
+{
+    connection_.emitPropertiesChangedSignal(objectPath_, interfaceName, propNames);
+}
+
+void Object::emitPropertiesChangedSignal(const std::string& interfaceName)
+{
+    Object::emitPropertiesChangedSignal(interfaceName, {});
+}
+
+void Object::emitInterfacesAddedSignal()
+{
+    connection_.emitInterfacesAddedSignal(objectPath_);
+}
+
+void Object::emitInterfacesAddedSignal(const std::vector<std::string>& interfaces)
+{
+    connection_.emitInterfacesAddedSignal(objectPath_, interfaces);
+}
+
+void Object::emitInterfacesRemovedSignal()
+{
+    connection_.emitInterfacesRemovedSignal(objectPath_);
+}
+
+void Object::emitInterfacesRemovedSignal(const std::vector<std::string>& interfaces)
+{
+    connection_.emitInterfacesRemovedSignal(objectPath_, interfaces);
+}
+
+void Object::addObjectManager()
+{
+    objectManagerSlot_ = connection_.addObjectManager(objectPath_);
+}
+
+void Object::removeObjectManager()
+{
+    objectManagerSlot_.reset();
+}
+
+bool Object::hasObjectManager() const
+{
+    return objectManagerSlot_ != nullptr;
+}
+
 sdbus::IConnection& Object::getConnection() const
 {
     return dynamic_cast<sdbus::IConnection&>(connection_);
@@ -202,10 +254,7 @@ void Object::activateInterfaceVTable( const std::string& interfaceName
                                     , InterfaceData& interfaceData
                                     , const std::vector<sd_bus_vtable>& vtable )
 {
-    // Tell, don't ask
-    auto slot = connection_.addObjectVTable(objectPath_, interfaceName, &vtable[0], this);
-    interfaceData.slot_.reset(slot);
-    interfaceData.slot_.get_deleter() = [this](sd_bus_slot *slot){ connection_.removeObjectVTable(slot); };
+    interfaceData.slot_ = connection_.addObjectVTable(objectPath_, interfaceName, &vtable[0], this);
 }
 
 int Object::sdbus_method_callback(sd_bus_message *sdbusMessage, void *userData, sd_bus_error *retError)
@@ -213,7 +262,7 @@ int Object::sdbus_method_callback(sd_bus_message *sdbusMessage, void *userData,
     auto* object = static_cast<Object*>(userData);
     assert(object != nullptr);
 
-    MethodCall message{sdbusMessage, &object->connection_.getSdBusInterface()};
+    auto message = Message::Factory::create<MethodCall>(sdbusMessage, &object->connection_.getSdBusInterface());
 
     // Note: The lookup can be optimized by using sorted vectors instead of associative containers
     auto& callback = object->interfaces_[message.getInterfaceName()].methods_[message.getMemberName()].callback_;
@@ -251,7 +300,7 @@ int Object::sdbus_property_get_callback( sd_bus */*bus*/
         return 1;
     }
 
-    Message reply{sdbusReply, &object->connection_.getSdBusInterface()};
+    auto reply = Message::Factory::create<PropertyGetReply>(sdbusReply, &object->connection_.getSdBusInterface());
 
     try
     {
@@ -280,7 +329,7 @@ int Object::sdbus_property_set_callback( sd_bus */*bus*/
     auto& callback = object->interfaces_[interface].properties_[property].setCallback_;
     assert(callback);
 
-    Message value{sdbusValue, &object->connection_.getSdBusInterface()};
+    auto value = Message::Factory::create<PropertySetCall>(sdbusValue, &object->connection_.getSdBusInterface());
 
     try
     {

src/Object.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Object.h
  *
@@ -73,9 +74,20 @@ namespace internal {
         void setInterfaceFlags(const std::string& interfaceName, Flags flags) override;
 
         void finishRegistration() override;
+        void unregister() override;
 
         sdbus::Signal createSignal(const std::string& interfaceName, const std::string& signalName) override;
         void emitSignal(const sdbus::Signal& message) override;
+        void emitPropertiesChangedSignal(const std::string& interfaceName, const std::vector<std::string>& propNames) override;
+        void emitPropertiesChangedSignal(const std::string& interfaceName) override;
+        void emitInterfacesAddedSignal() override;
+        void emitInterfacesAddedSignal(const std::vector<std::string>& interfaces) override;
+        void emitInterfacesRemovedSignal() override;
+        void emitInterfacesRemovedSignal(const std::vector<std::string>& interfaces) override;
+
+        void addObjectManager() override;
+        void removeObjectManager() override;
+        bool hasObjectManager() const override;
 
         sdbus::IConnection& getConnection() const override;
 
@@ -111,7 +123,7 @@ namespace internal {
             std::vector<sd_bus_vtable> vtable_;
             Flags flags_;
 
-            std::unique_ptr<sd_bus_slot, std::function<void(sd_bus_slot*)>> slot_;
+            SlotPtr slot_;
         };
 
         static const std::vector<sd_bus_vtable>& createInterfaceVTable(InterfaceData& interfaceData);
@@ -142,6 +154,7 @@ namespace internal {
         sdbus::internal::IConnection& connection_;
         std::string objectPath_;
         std::map<InterfaceName, InterfaceData> interfaces_;
+        SlotPtr objectManagerSlot_;
     };
 
 }

src/ObjectProxy.cpp

@@ -1,205 +0,0 @@
-/**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file ObjectProxy.cpp
- *
- * Created on: Nov 8, 2016
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ObjectProxy.h"
-#include <sdbus-c++/Message.h>
-#include <sdbus-c++/IConnection.h>
-#include <sdbus-c++/Error.h>
-#include "IConnection.h"
-#include <systemd/sd-bus.h>
-#include <cassert>
-#include <chrono>
-#include <thread>
-
-namespace sdbus { namespace internal {
-
-ObjectProxy::ObjectProxy(sdbus::internal::IConnection& connection, std::string destination, std::string objectPath)
-    : connection_(&connection, [](sdbus::internal::IConnection *){ /* Intentionally left empty */ })
-    , destination_(std::move(destination))
-    , objectPath_(std::move(objectPath))
-{
-    // The connection is not ours only, it is managed by the client and we just reference it here,
-    // so we expect the client to manage the event loop upon this connection themselves.
-}
-
-ObjectProxy::ObjectProxy( std::unique_ptr<sdbus::internal::IConnection>&& connection
-                        , std::string destination
-                        , std::string objectPath )
-    : connection_(std::move(connection))
-    , destination_(std::move(destination))
-    , objectPath_(std::move(objectPath))
-{
-    // The connection is ours only, so we have to manage event loop upon this connection,
-    // so we get signals, async replies, and other messages from D-Bus.
-    connection_->enterProcessingLoopAsync();
-}
-
-MethodCall ObjectProxy::createMethodCall(const std::string& interfaceName, const std::string& methodName)
-{
-    return connection_->createMethodCall(destination_, objectPath_, interfaceName, methodName);
-}
-
-AsyncMethodCall ObjectProxy::createAsyncMethodCall(const std::string& interfaceName, const std::string& methodName)
-{
-    return AsyncMethodCall{ObjectProxy::createMethodCall(interfaceName, methodName)};
-}
-
-MethodReply ObjectProxy::callMethod(const MethodCall& message)
-{
-    return message.send();
-}
-
-void ObjectProxy::callMethod(const AsyncMethodCall& message, async_reply_handler asyncReplyCallback)
-{
-    auto callback = (void*)&ObjectProxy::sdbus_async_reply_handler;
-    // Allocated userData gets deleted in the sdbus_async_reply_handler
-    auto userData = new AsyncReplyUserData{*this, std::move(asyncReplyCallback)};
-
-    message.send(callback, userData);
-}
-
-void ObjectProxy::registerSignalHandler( const std::string& interfaceName
-                                       , const std::string& signalName
-                                       , signal_handler signalHandler )
-{
-    SDBUS_THROW_ERROR_IF(!signalHandler, "Invalid signal handler provided", EINVAL);
-
-    auto& interface = interfaces_[interfaceName];
-
-    InterfaceData::SignalData signalData{std::move(signalHandler), nullptr};
-    auto insertionResult = interface.signals_.emplace(signalName, std::move(signalData));
-
-    auto inserted = insertionResult.second;
-    SDBUS_THROW_ERROR_IF(!inserted, "Failed to register signal handler: handler already exists", EINVAL);
-}
-
-void ObjectProxy::finishRegistration()
-{
-    registerSignalHandlers(*connection_);
-}
-
-void ObjectProxy::registerSignalHandlers(sdbus::internal::IConnection& connection)
-{
-    for (auto& interfaceItem : interfaces_)
-    {
-        const auto& interfaceName = interfaceItem.first;
-        auto& signalsOnInterface = interfaceItem.second.signals_;
-
-        for (auto& signalItem : signalsOnInterface)
-        {
-            const auto& signalName = signalItem.first;
-            auto& slot = signalItem.second.slot_;
-            auto* rawSlotPtr = connection.registerSignalHandler( objectPath_
-                                                               , interfaceName
-                                                               , signalName
-                                                               , &ObjectProxy::sdbus_signal_callback
-                                                               , this );
-            slot.reset(rawSlotPtr);
-            slot.get_deleter() = [&connection](sd_bus_slot *slot){ connection.unregisterSignalHandler(slot); };
-        }
-    }
-}
-
-int ObjectProxy::sdbus_async_reply_handler(sd_bus_message *sdbusMessage, void *userData, sd_bus_error *retError)
-{
-    // We are assuming the ownership of the async reply handler pointer passed here
-    std::unique_ptr<AsyncReplyUserData> asyncReplyUserData{static_cast<AsyncReplyUserData*>(userData)};
-    assert(asyncReplyUserData != nullptr);
-    assert(asyncReplyUserData->callback);
-
-    MethodReply message{sdbusMessage, &asyncReplyUserData->proxy.connection_->getSdBusInterface()};
-
-    const auto* error = sd_bus_message_get_error(sdbusMessage);
-    if (error == nullptr)
-    {
-        asyncReplyUserData->callback(message, nullptr);
-    }
-    else
-    {
-        sdbus::Error exception(error->name, error->message);
-        asyncReplyUserData->callback(message, &exception);
-    }
-}
-
-int ObjectProxy::sdbus_signal_callback(sd_bus_message *sdbusMessage, void *userData, sd_bus_error */*retError*/)
-{
-    auto* proxy = static_cast<ObjectProxy*>(userData);
-    assert(proxy != nullptr);
-
-    Signal message{sdbusMessage, &proxy->connection_->getSdBusInterface()};
-
-    // Note: The lookup can be optimized by using sorted vectors instead of associative containers
-    auto& callback = proxy->interfaces_[message.getInterfaceName()].signals_[message.getMemberName()].callback_;
-    assert(callback);
-
-    callback(message);
-
-    return 1;
-}
-
-}}
-
-namespace sdbus {
-
-std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( IConnection& connection
-                                                      , std::string destination
-                                                      , std::string objectPath )
-{
-    auto* sdbusConnection = dynamic_cast<sdbus::internal::IConnection*>(&connection);
-    SDBUS_THROW_ERROR_IF(!sdbusConnection, "Connection is not a real sdbus-c++ connection", EINVAL);
-
-    return std::make_unique<sdbus::internal::ObjectProxy>( *sdbusConnection
-                                                         , std::move(destination)
-                                                         , std::move(objectPath) );
-}
-
-std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( std::unique_ptr<IConnection>&& connection
-                                                      , std::string destination
-                                                      , std::string objectPath )
-{
-    auto* sdbusConnection = dynamic_cast<sdbus::internal::IConnection*>(connection.get());
-    SDBUS_THROW_ERROR_IF(!sdbusConnection, "Connection is not a real sdbus-c++ connection", EINVAL);
-
-    connection.release();
-
-    return std::make_unique<sdbus::internal::ObjectProxy>( std::unique_ptr<sdbus::internal::IConnection>(sdbusConnection)
-                                                         , std::move(destination)
-                                                         , std::move(objectPath) );
-}
-
-std::unique_ptr<sdbus::IObjectProxy> createObjectProxy( std::string destination
-                                                      , std::string objectPath )
-{
-    auto connection = sdbus::createConnection();
-
-    auto sdbusConnection = std::unique_ptr<sdbus::internal::IConnection>(dynamic_cast<sdbus::internal::IConnection*>(connection.release()));
-    assert(sdbusConnection != nullptr);
-
-    return std::make_unique<sdbus::internal::ObjectProxy>( std::move(sdbusConnection)
-                                                         , std::move(destination)
-                                                         , std::move(objectPath) );
-}
-
-}

src/Proxy.cpp

@@ -0,0 +1,217 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file Proxy.cpp
+ *
+ * Created on: Nov 8, 2016
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "Proxy.h"
+#include "IConnection.h"
+#include "MessageUtils.h"
+#include "sdbus-c++/Message.h"
+#include "sdbus-c++/IConnection.h"
+#include "sdbus-c++/Error.h"
+#include "ScopeGuard.h"
+#include <systemd/sd-bus.h>
+#include <cassert>
+#include <chrono>
+#include <thread>
+
+namespace sdbus { namespace internal {
+
+Proxy::Proxy(sdbus::internal::IConnection& connection, std::string destination, std::string objectPath)
+    : connection_(&connection, [](sdbus::internal::IConnection *){ /* Intentionally left empty */ })
+    , destination_(std::move(destination))
+    , objectPath_(std::move(objectPath))
+{
+    // The connection is not ours only, it is owned and managed by the user and we just reference
+    // it here, so we expect the client to manage the event loop upon this connection themselves.
+}
+
+Proxy::Proxy( std::unique_ptr<sdbus::internal::IConnection>&& connection
+            , std::string destination
+            , std::string objectPath )
+    : connection_(std::move(connection))
+    , destination_(std::move(destination))
+    , objectPath_(std::move(objectPath))
+{
+    // The connection is ours only, i.e. it's us who has to manage the event loop upon this connection,
+    // in order that we get and process signals, async call replies, and other messages from D-Bus.
+    connection_->enterProcessingLoopAsync();
+}
+
+MethodCall Proxy::createMethodCall(const std::string& interfaceName, const std::string& methodName)
+{
+    return connection_->createMethodCall(destination_, objectPath_, interfaceName, methodName);
+}
+
+AsyncMethodCall Proxy::createAsyncMethodCall(const std::string& interfaceName, const std::string& methodName)
+{
+    return AsyncMethodCall{Proxy::createMethodCall(interfaceName, methodName)};
+}
+
+MethodReply Proxy::callMethod(const MethodCall& message)
+{
+    return message.send();
+}
+
+void Proxy::callMethod(const AsyncMethodCall& message, async_reply_handler asyncReplyCallback)
+{
+    auto callback = (void*)&Proxy::sdbus_async_reply_handler;
+    auto callData = std::make_unique<AsyncCalls::CallData>(AsyncCalls::CallData{*this, std::move(asyncReplyCallback), {}});
+
+    callData->slot = message.send(callback, callData.get());
+
+    pendingAsyncCalls_.addCall(callData->slot.get(), std::move(callData));
+}
+
+void Proxy::registerSignalHandler( const std::string& interfaceName
+                                 , const std::string& signalName
+                                 , signal_handler signalHandler )
+{
+    SDBUS_THROW_ERROR_IF(!signalHandler, "Invalid signal handler provided", EINVAL);
+
+    auto& interface = interfaces_[interfaceName];
+
+    InterfaceData::SignalData signalData{std::move(signalHandler), nullptr};
+    auto insertionResult = interface.signals_.emplace(signalName, std::move(signalData));
+
+    auto inserted = insertionResult.second;
+    SDBUS_THROW_ERROR_IF(!inserted, "Failed to register signal handler: handler already exists", EINVAL);
+}
+
+void Proxy::finishRegistration()
+{
+    registerSignalHandlers(*connection_);
+}
+
+void Proxy::registerSignalHandlers(sdbus::internal::IConnection& connection)
+{
+    for (auto& interfaceItem : interfaces_)
+    {
+        const auto& interfaceName = interfaceItem.first;
+        auto& signalsOnInterface = interfaceItem.second.signals_;
+
+        for (auto& signalItem : signalsOnInterface)
+        {
+            const auto& signalName = signalItem.first;
+            auto& slot = signalItem.second.slot_;
+            slot = connection.registerSignalHandler( objectPath_
+                                                   , interfaceName
+                                                   , signalName
+                                                   , &Proxy::sdbus_signal_callback
+                                                   , this );
+        }
+    }
+}
+
+void Proxy::unregister()
+{
+    pendingAsyncCalls_.clear();
+    interfaces_.clear();
+}
+
+int Proxy::sdbus_async_reply_handler(sd_bus_message *sdbusMessage, void *userData, sd_bus_error */*retError*/)
+{
+    auto* asyncCallData = static_cast<AsyncCalls::CallData*>(userData);
+    assert(asyncCallData != nullptr);
+    assert(asyncCallData->callback);
+    auto& proxy = asyncCallData->proxy;
+
+    SCOPE_EXIT{ proxy.pendingAsyncCalls_.removeCall(asyncCallData->slot.get()); };
+
+    auto message = Message::Factory::create<MethodReply>(sdbusMessage, &proxy.connection_->getSdBusInterface());
+
+    const auto* error = sd_bus_message_get_error(sdbusMessage);
+    if (error == nullptr)
+    {
+        asyncCallData->callback(message, nullptr);
+    }
+    else
+    {
+        sdbus::Error exception(error->name, error->message);
+        asyncCallData->callback(message, &exception);
+    }
+
+    return 1;
+}
+
+int Proxy::sdbus_signal_callback(sd_bus_message *sdbusMessage, void *userData, sd_bus_error */*retError*/)
+{
+    auto* proxy = static_cast<Proxy*>(userData);
+    assert(proxy != nullptr);
+
+    auto message = Message::Factory::create<Signal>(sdbusMessage, &proxy->connection_->getSdBusInterface());
+
+    // Note: The lookup can be optimized by using sorted vectors instead of associative containers
+    auto& callback = proxy->interfaces_[message.getInterfaceName()].signals_[message.getMemberName()].callback_;
+    assert(callback);
+
+    callback(message);
+
+    return 1;
+}
+
+}}
+
+namespace sdbus {
+
+std::unique_ptr<sdbus::IProxy> createProxy( IConnection& connection
+                                          , std::string destination
+                                          , std::string objectPath )
+{
+    auto* sdbusConnection = dynamic_cast<sdbus::internal::IConnection*>(&connection);
+    SDBUS_THROW_ERROR_IF(!sdbusConnection, "Connection is not a real sdbus-c++ connection", EINVAL);
+
+    return std::make_unique<sdbus::internal::Proxy>( *sdbusConnection
+                                                   , std::move(destination)
+                                                   , std::move(objectPath) );
+}
+
+std::unique_ptr<sdbus::IProxy> createProxy( std::unique_ptr<IConnection>&& connection
+                                          , std::string destination
+                                          , std::string objectPath )
+{
+    auto* sdbusConnection = dynamic_cast<sdbus::internal::IConnection*>(connection.get());
+    SDBUS_THROW_ERROR_IF(!sdbusConnection, "Connection is not a real sdbus-c++ connection", EINVAL);
+
+    connection.release();
+
+    return std::make_unique<sdbus::internal::Proxy>( std::unique_ptr<sdbus::internal::IConnection>(sdbusConnection)
+                                                   , std::move(destination)
+                                                   , std::move(objectPath) );
+}
+
+std::unique_ptr<sdbus::IProxy> createProxy( std::string destination
+                                          , std::string objectPath )
+{
+    auto connection = sdbus::createConnection();
+
+    auto sdbusConnection = std::unique_ptr<sdbus::internal::IConnection>(dynamic_cast<sdbus::internal::IConnection*>(connection.release()));
+    assert(sdbusConnection != nullptr);
+
+    return std::make_unique<sdbus::internal::Proxy>( std::move(sdbusConnection)
+                                                   , std::move(destination)
+                                                   , std::move(objectPath) );
+}
+
+}

src/Proxy.h

@@ -1,7 +1,8 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
- * @file ObjectProxy.h
+ * @file Proxy.h
  *
  * Created on: Nov 8, 2016
  * Project: sdbus-c++
@@ -23,33 +24,31 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef SDBUS_CXX_INTERNAL_OBJECTPROXY_H_
-#define SDBUS_CXX_INTERNAL_OBJECTPROXY_H_
+#ifndef SDBUS_CXX_INTERNAL_PROXY_H_
+#define SDBUS_CXX_INTERNAL_PROXY_H_
 
-#include <sdbus-c++/IObjectProxy.h>
+#include <sdbus-c++/IProxy.h>
+#include "IConnection.h"
 #include <systemd/sd-bus.h>
 #include <string>
 #include <memory>
 #include <map>
-
-// Forward declarations
-namespace sdbus { namespace internal {
-    class IConnection;
-}}
+#include <unordered_map>
+#include <mutex>
 
 namespace sdbus {
 namespace internal {
 
-    class ObjectProxy
-        : public IObjectProxy
+    class Proxy
+        : public IProxy
     {
     public:
-        ObjectProxy( sdbus::internal::IConnection& connection
-                   , std::string destination
-                   , std::string objectPath );
-        ObjectProxy( std::unique_ptr<sdbus::internal::IConnection>&& connection
-                   , std::string destination
-                   , std::string objectPath );
+        Proxy( sdbus::internal::IConnection& connection
+             , std::string destination
+             , std::string objectPath );
+        Proxy( std::unique_ptr<sdbus::internal::IConnection>&& connection
+             , std::string destination
+             , std::string objectPath );
 
         MethodCall createMethodCall(const std::string& interfaceName, const std::string& methodName) override;
         AsyncMethodCall createAsyncMethodCall(const std::string& interfaceName, const std::string& methodName) override;
@@ -60,14 +59,9 @@ namespace internal {
                                   , const std::string& signalName
                                   , signal_handler signalHandler ) override;
         void finishRegistration() override;
+        void unregister() override;
 
     private:
-        struct AsyncReplyUserData
-        {
-            ObjectProxy& proxy;
-            async_reply_handler callback;
-        };
-
         void registerSignalHandlers(sdbus::internal::IConnection& connection);
         static int sdbus_async_reply_handler(sd_bus_message *sdbusMessage, void *userData, sd_bus_error *retError);
         static int sdbus_signal_callback(sd_bus_message *sdbusMessage, void *userData, sd_bus_error *retError);
@@ -86,13 +80,58 @@ namespace internal {
             struct SignalData
             {
                 signal_handler callback_;
-                std::unique_ptr<sd_bus_slot, std::function<void(sd_bus_slot*)>> slot_;
+                SlotPtr slot_;
             };
             std::map<SignalName, SignalData> signals_;
         };
         std::map<InterfaceName, InterfaceData> interfaces_;
+
+        // We need to keep track of pending async calls. When the proxy is being destructed, we must
+        // remove all slots of these pending calls, otherwise in case when the connection outlives
+        // the proxy, we might get async reply handlers invoked for pending async calls after the proxy
+        // has been destroyed, which is a free ticket into the realm of undefined behavior.
+        class AsyncCalls
+        {
+        public:
+            struct CallData
+            {
+                Proxy& proxy;
+                async_reply_handler callback;
+                AsyncMethodCall::Slot slot;
+            };
+
+            ~AsyncCalls()
+            {
+                clear();
+            }
+
+            bool addCall(void* slot, std::unique_ptr<CallData>&& asyncCallData)
+            {
+                std::lock_guard<std::mutex> lock(mutex_);
+                return calls_.emplace(slot, std::move(asyncCallData)).second;
+            }
+
+            bool removeCall(void* slot)
+            {
+                std::lock_guard<std::mutex> lock(mutex_);
+                return calls_.erase(slot) > 0;
+            }
+
+            void clear()
+            {
+                std::unique_lock<std::mutex> lock(mutex_);
+                auto asyncCallSlots = std::move(calls_);
+                // Perform releasing of sd-bus slots outside of the calls_ critical section which avoids
+                // double mutex dead lock when the async reply handler is invoked at the same time.
+                lock.unlock();
+            }
+
+        private:
+            std::unordered_map<void*, std::unique_ptr<CallData>> calls_;
+            std::mutex mutex_;
+        } pendingAsyncCalls_;
     };
 
 }}
 
-#endif /* SDBUS_CXX_INTERNAL_OBJECTPROXY_H_ */
+#endif /* SDBUS_CXX_INTERNAL_PROXY_H_ */

src/ScopeGuard.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file ScopeGuard.h
  *

src/SdBus.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file SdBus.cpp
  * @author Ardazishvili Roman (ardazishvili.roman@yandex.ru)
@@ -91,6 +92,41 @@ int SdBus::sd_bus_message_new_method_error(sd_bus_message *call, sd_bus_message
     return ::sd_bus_message_new_method_error(call, m, e);
 }
 
+int SdBus::sd_bus_emit_properties_changed_strv(sd_bus *bus, const char *path, const char *interface, char **names)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_emit_properties_changed_strv(bus, path, interface, names);
+}
+
+int SdBus::sd_bus_emit_object_added(sd_bus *bus, const char *path)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_emit_object_added(bus, path);
+}
+
+int SdBus::sd_bus_emit_object_removed(sd_bus *bus, const char *path)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_emit_object_removed(bus, path);
+}
+
+int SdBus::sd_bus_emit_interfaces_added_strv(sd_bus *bus, const char *path, char **interfaces)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_emit_interfaces_added_strv(bus, path, interfaces);
+}
+
+int SdBus::sd_bus_emit_interfaces_removed_strv(sd_bus *bus, const char *path, char **interfaces)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_emit_interfaces_removed_strv(bus, path, interfaces);
+}
+
 int SdBus::sd_bus_open_user(sd_bus **ret)
 {
     return ::sd_bus_open_user(ret);
@@ -122,6 +158,13 @@ int SdBus::sd_bus_add_object_vtable(sd_bus *bus, sd_bus_slot **slot, const char
     return ::sd_bus_add_object_vtable(bus, slot, path, interface,  vtable, userdata);
 }
 
+int SdBus::sd_bus_add_object_manager(sd_bus *bus, sd_bus_slot **slot, const char *path)
+{
+    std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);
+
+    return ::sd_bus_add_object_manager(bus, slot, path);
+}
+
 int SdBus::sd_bus_add_match(sd_bus *bus, sd_bus_slot **slot, const char *match, sd_bus_message_handler_t callback, void *userdata)
 {
     std::unique_lock<std::recursive_mutex> lock(sdbusMutex_);

src/SdBus.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file SdBus.h
  * @author Ardazishvili Roman (ardazishvili.roman@yandex.ru)
@@ -47,11 +48,18 @@ public:
     virtual int sd_bus_message_new_method_return(sd_bus_message *call, sd_bus_message **m) override;
     virtual int sd_bus_message_new_method_error(sd_bus_message *call, sd_bus_message **m, const sd_bus_error *e) override;
 
+    virtual int sd_bus_emit_properties_changed_strv(sd_bus *bus, const char *path, const char *interface, char **names) override;
+    virtual int sd_bus_emit_object_added(sd_bus *bus, const char *path) override;
+    virtual int sd_bus_emit_object_removed(sd_bus *bus, const char *path) override;
+    virtual int sd_bus_emit_interfaces_added_strv(sd_bus *bus, const char *path, char **interfaces) override;
+    virtual int sd_bus_emit_interfaces_removed_strv(sd_bus *bus, const char *path, char **interfaces) override;
+
     virtual int sd_bus_open_user(sd_bus **ret) override;
     virtual int sd_bus_open_system(sd_bus **ret) override;
     virtual int sd_bus_request_name(sd_bus *bus, const char *name, uint64_t flags) override;
     virtual int sd_bus_release_name(sd_bus *bus, const char *name) override;
     virtual int sd_bus_add_object_vtable(sd_bus *bus, sd_bus_slot **slot, const char *path, const char *interface, const sd_bus_vtable *vtable, void *userdata) override;
+    virtual int sd_bus_add_object_manager(sd_bus *bus, sd_bus_slot **slot, const char *path) override;
     virtual int sd_bus_add_match(sd_bus *bus, sd_bus_slot **slot, const char *match, sd_bus_message_handler_t callback, void *userdata) override;
     virtual sd_bus_slot* sd_bus_slot_unref(sd_bus_slot *slot) override;
 

src/Types.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Types.cpp
  *

src/VTableUtils.c

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file VTableUtils.c
  *

src/VTableUtils.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file VTableUtils.h
  *

test/integrationtests/TestingProxy.h

@@ -1,78 +0,0 @@
-/**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file TestingProxy.h
- *
- * Created on: Jan 2, 2017
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_
-#define SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_
-
-#include "proxy-glue.h"
-
-class TestingProxy : public sdbus::ProxyInterfaces<::testing_proxy, sdbus::introspectable_proxy>
-{
-public:
-    using sdbus::ProxyInterfaces<::testing_proxy, sdbus::introspectable_proxy>::ProxyInterfaces;
-
-    int getSimpleCallCount() const { return m_simpleCallCounter; }
-    std::map<int32_t, std::string> getMap() const { return m_map; }
-    double getVariantValue() const { return m_variantValue; }
-    std::map<std::string, std::string> getSignatureFromSignal() const { return m_signature; }
-
-    void installDoOperationClientSideAsyncReplyHandler(std::function<void(uint32_t res, const sdbus::Error* err)> handler)
-    {
-        m_DoOperationClientSideAsyncReplyHandler = handler;
-    }
-
-protected:
-    void onSimpleSignal() override { ++m_simpleCallCounter; }
-
-    void onSignalWithMap(const std::map<int32_t, std::string>& m) override { m_map = m; }
-
-    void onSignalWithVariant(const sdbus::Variant& v) override
-    {
-        m_variantValue = v.get<double>();
-    }
-
-    void onSignalWithoutRegistration(const sdbus::Struct<std::string, sdbus::Struct<sdbus::Signature>>& s) override
-    {
-        m_signature[std::get<0>(s)] = static_cast<std::string>(std::get<0>(std::get<1>(s)));
-    }
-
-    void onDoOperationReply(uint32_t returnValue, const sdbus::Error* error) override
-    {
-        if (m_DoOperationClientSideAsyncReplyHandler)
-            m_DoOperationClientSideAsyncReplyHandler(returnValue, error);
-    }
-
-private:
-    int m_simpleCallCounter{};
-    std::map<int32_t, std::string> m_map;
-    double m_variantValue;
-    std::map<std::string, std::string> m_signature;
-
-    std::function<void(uint32_t res, const sdbus::Error* err)> m_DoOperationClientSideAsyncReplyHandler;
-};
-
-
-
-#endif /* SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_ */

test/perftests/perftest-adaptor.h

@@ -1,46 +0,0 @@
-
-/*
- * This file was automatically generated by sdbuscpp-xml2cpp; DO NOT EDIT!
- */
-
-#ifndef __sdbuscpp__perftest_adaptor_h__adaptor__H__
-#define __sdbuscpp__perftest_adaptor_h__adaptor__H__
-
-#include <sdbus-c++/sdbus-c++.h>
-#include <string>
-#include <tuple>
-
-namespace org {
-namespace sdbuscpp {
-
-class perftest_adaptor
-{
-public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.perftests";
-
-protected:
-    perftest_adaptor(sdbus::IObject& object)
-        : object_(object)
-    {
-        object_.registerMethod("sendDataSignals").onInterface(interfaceName).implementedAs([this](const uint32_t& numberOfSignals, const uint32_t& signalMsgSize){ return this->sendDataSignals(numberOfSignals, signalMsgSize); });
-        object_.registerMethod("concatenateTwoStrings").onInterface(interfaceName).implementedAs([this](const std::string& string1, const std::string& string2){ return this->concatenateTwoStrings(string1, string2); });
-        object_.registerSignal("dataSignal").onInterface(interfaceName).withParameters<std::string>();
-    }
-
-public:
-    void dataSignal(const std::string& data)
-    {
-        object_.emitSignal("dataSignal").onInterface(interfaceName).withArguments(data);
-    }
-
-private:
-    virtual void sendDataSignals(const uint32_t& numberOfSignals, const uint32_t& signalMsgSize) = 0;
-    virtual std::string concatenateTwoStrings(const std::string& string1, const std::string& string2) = 0;
-
-private:
-    sdbus::IObject& object_;
-};
-
-}} // namespaces
-
-#endif

test/perftests/perftest-proxy.h

@@ -1,49 +0,0 @@
-
-/*
- * This file was automatically generated by sdbuscpp-xml2cpp; DO NOT EDIT!
- */
-
-#ifndef __sdbuscpp__perftest_proxy_h__proxy__H__
-#define __sdbuscpp__perftest_proxy_h__proxy__H__
-
-#include <sdbus-c++/sdbus-c++.h>
-#include <string>
-#include <tuple>
-
-namespace org {
-namespace sdbuscpp {
-
-class perftest_proxy
-{
-public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.perftests";
-
-protected:
-    perftest_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
-    {
-        object_.uponSignal("dataSignal").onInterface(interfaceName).call([this](const std::string& data){ this->onDataSignal(data); });
-    }
-
-    virtual void onDataSignal(const std::string& data) = 0;
-
-public:
-    void sendDataSignals(const uint32_t& numberOfSignals, const uint32_t& signalMsgSize)
-    {
-        object_.callMethod("sendDataSignals").onInterface(interfaceName).withArguments(numberOfSignals, signalMsgSize);
-    }
-
-    std::string concatenateTwoStrings(const std::string& string1, const std::string& string2)
-    {
-        std::string result;
-        object_.callMethod("concatenateTwoStrings").onInterface(interfaceName).withArguments(string1, string2).storeResultsTo(result);
-        return result;
-    }
-
-private:
-    sdbus::IObjectProxy& object_;
-};
-
-}} // namespaces
-
-#endif

test/stresstests/sdbus-c++-stress-tests.cpp

@@ -1,424 +0,0 @@
-/**
- * (C) 2019 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
- *
- * @file sdbus-c++-stress-tests.cpp
- *
- * Created on: Jan 25, 2019
- * Project: sdbus-c++
- * Description: High-level D-Bus IPC C++ library based on sd-bus
- *
- * This file is part of sdbus-c++.
- *
- * sdbus-c++ is free software; you can redistribute it and/or modify it
- * under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * sdbus-c++ is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "celsius-thermometer-adaptor.h"
-#include "celsius-thermometer-proxy.h"
-#include "fahrenheit-thermometer-adaptor.h"
-#include "fahrenheit-thermometer-proxy.h"
-#include "concatenator-adaptor.h"
-#include "concatenator-proxy.h"
-#include <sdbus-c++/sdbus-c++.h>
-#include <vector>
-#include <string>
-#include <iostream>
-#include <unistd.h>
-#include <thread>
-#include <chrono>
-#include <cassert>
-#include <atomic>
-#include <sstream>
-#include <mutex>
-#include <condition_variable>
-#include <queue>
-
-using namespace std::chrono_literals;
-using namespace std::string_literals;
-
-#define SERVICE_1_BUS_NAME "org.sdbuscpp.stresstests.service1"s
-#define SERVICE_2_BUS_NAME "org.sdbuscpp.stresstests.service2"s
-#define CELSIUS_THERMOMETER_OBJECT_PATH "/org/sdbuscpp/stresstests/celsius/thermometer"s
-#define FAHRENHEIT_THERMOMETER_OBJECT_PATH "/org/sdbuscpp/stresstests/fahrenheit/thermometer"s
-#define CONCATENATOR_OBJECT_PATH "/org/sdbuscpp/stresstests/concatenator"s
-
-class CelsiusThermometerAdaptor : public sdbus::Interfaces<org::sdbuscpp::stresstests::celsius::thermometer_adaptor>
-{
-public:
-    using sdbus::Interfaces<org::sdbuscpp::stresstests::celsius::thermometer_adaptor>::Interfaces;
-
-protected:
-    virtual uint32_t getCurrentTemperature() override
-    {
-        return m_currentTemperature++;
-    }
-
-private:
-    uint32_t m_currentTemperature{};
-};
-
-class CelsiusThermometerProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::celsius::thermometer_proxy>
-{
-public:
-    using sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::celsius::thermometer_proxy>::ProxyInterfaces;
-};
-
-class FahrenheitThermometerAdaptor : public sdbus::Interfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_adaptor
-                                                             , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_adaptor >
-{
-public:
-    FahrenheitThermometerAdaptor(sdbus::IConnection& connection, std::string objectPath)
-        : sdbus::Interfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_adaptor
-                           , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_adaptor >(connection, std::move(objectPath))
-        , celsiusProxy_(connection, SERVICE_2_BUS_NAME, CELSIUS_THERMOMETER_OBJECT_PATH)
-    {
-        unsigned int workers = std::thread::hardware_concurrency();
-        if (workers < 4)
-            workers = 4;
-
-        for (unsigned int i = 0; i < workers; ++i)
-            workers_.emplace_back([this]()
-            {
-                //std::cout << "Created FTA worker thread 0x" << std::hex << std::this_thread::get_id() << std::dec << std::endl;
-
-                while(!exit_)
-                {
-                    // Pop a work item from the queue
-                    std::unique_lock<std::mutex> lock(mutex_);
-                    cond_.wait(lock, [this]{return !requests_.empty() || exit_;});
-                    if (exit_)
-                        break;
-                    auto request = std::move(requests_.front());
-                    requests_.pop();
-                    lock.unlock();
-
-                    // Either create or destroy a delegate object
-                    if (request.delegateObjectPath.empty())
-                    {
-                        // Create new delegate object
-                        auto& connection = getObject().getConnection();
-                        sdbus::ObjectPath newObjectPath = FAHRENHEIT_THERMOMETER_OBJECT_PATH + "/" + std::to_string(request.objectNr);
-
-                        // Here we are testing dynamic creation of a D-Bus object in an async way
-                        auto adaptor = std::make_unique<FahrenheitThermometerAdaptor>(connection, newObjectPath);
-
-                        std::unique_lock<std::mutex> lock{childrenMutex_};
-                        children_.emplace(newObjectPath, std::move(adaptor));
-                        lock.unlock();
-
-                        request.result.returnResults(newObjectPath);
-                    }
-                    else
-                    {
-                        // Destroy existing delegate object
-                        // Here we are testing dynamic removal of a D-Bus object in an async way
-                        std::lock_guard<std::mutex> lock{childrenMutex_};
-                        children_.erase(request.delegateObjectPath);
-                    }
-                }
-            });
-    }
-
-    ~FahrenheitThermometerAdaptor()
-    {
-        exit_ = true;
-        cond_.notify_all();
-        for (auto& worker : workers_)
-            worker.join();
-    }
-
-protected:
-    virtual uint32_t getCurrentTemperature() override
-    {
-        // In this D-Bus call, make yet another D-Bus call to another service over the same connection
-        return static_cast<uint32_t>(celsiusProxy_.getCurrentTemperature() * 1.8 + 32.);
-    }
-
-    virtual void createDelegateObject(sdbus::Result<sdbus::ObjectPath>&& result) override
-    {
-        static size_t objectCounter{};
-        objectCounter++;
-
-        std::unique_lock<std::mutex> lock(mutex_);
-        requests_.push(WorkItem{objectCounter, std::string{}, std::move(result)});
-        lock.unlock();
-        cond_.notify_one();
-    }
-
-    virtual void destroyDelegateObject(sdbus::Result<>&& /*result*/, sdbus::ObjectPath delegate) override
-    {
-        std::unique_lock<std::mutex> lock(mutex_);
-        requests_.push(WorkItem{0, std::move(delegate), {}});
-        lock.unlock();
-        cond_.notify_one();
-    }
-
-private:
-    CelsiusThermometerProxy celsiusProxy_;
-    std::map<std::string, std::unique_ptr<FahrenheitThermometerAdaptor>> children_;
-    std::mutex childrenMutex_;
-
-    struct WorkItem
-    {
-        size_t objectNr;
-        sdbus::ObjectPath delegateObjectPath;
-        sdbus::Result<sdbus::ObjectPath> result;
-    };
-    std::mutex mutex_;
-    std::condition_variable cond_;
-    std::queue<WorkItem> requests_;
-    std::vector<std::thread> workers_;
-    std::atomic<bool> exit_{};
-};
-
-class FahrenheitThermometerProxy : public sdbus::ProxyInterfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_proxy
-                                                                , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_proxy >
-{
-public:
-    using sdbus::ProxyInterfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_proxy
-                                , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_proxy >::ProxyInterfaces;
-};
-
-class ConcatenatorAdaptor : public sdbus::Interfaces<org::sdbuscpp::stresstests::concatenator_adaptor>
-{
-public:
-    ConcatenatorAdaptor(sdbus::IConnection& connection, std::string objectPath)
-        : sdbus::Interfaces<org::sdbuscpp::stresstests::concatenator_adaptor>(connection, std::move(objectPath))
-    {
-        unsigned int workers = std::thread::hardware_concurrency();
-        if (workers < 4)
-            workers = 4;
-
-        for (unsigned int i = 0; i < workers; ++i)
-            workers_.emplace_back([this]()
-            {
-                //std::cout << "Created CA worker thread 0x" << std::hex << std::this_thread::get_id() << std::dec << std::endl;
-
-                while(!exit_)
-                {
-                    // Pop a work item from the queue
-                    std::unique_lock<std::mutex> lock(mutex_);
-                    cond_.wait(lock, [this]{return !requests_.empty() || exit_;});
-                    if (exit_)
-                        break;
-                    auto request = std::move(requests_.front());
-                    requests_.pop();
-                    lock.unlock();
-
-                    // Do concatenation work, return results and fire signal
-                    auto aString = request.input.at("key1").get<std::string>();
-                    auto aNumber = request.input.at("key2").get<uint32_t>();
-                    auto resultString = aString + " " + std::to_string(aNumber);
-
-                    request.result.returnResults(resultString);
-
-                    concatenatedSignal(resultString);
-                }
-            });
-    }
-
-    ~ConcatenatorAdaptor()
-    {
-        exit_ = true;
-        cond_.notify_all();
-        for (auto& worker : workers_)
-            worker.join();
-    }
-
-protected:
-    virtual void concatenate(sdbus::Result<std::string>&& result, std::map<std::string, sdbus::Variant> params) override
-    {
-        std::unique_lock<std::mutex> lock(mutex_);
-        requests_.push(WorkItem{std::move(params), std::move(result)});
-        lock.unlock();
-        cond_.notify_one();
-    }
-
-private:
-    struct WorkItem
-    {
-        std::map<std::string, sdbus::Variant> input;
-        sdbus::Result<std::string> result;
-    };
-    std::mutex mutex_;
-    std::condition_variable cond_;
-    std::queue<WorkItem> requests_;
-    std::vector<std::thread> workers_;
-    std::atomic<bool> exit_{};
-};
-
-class ConcatenatorProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::concatenator_proxy>
-{
-public:
-    using sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::concatenator_proxy>::ProxyInterfaces;
-
-private:
-    virtual void onConcatenateReply(const std::string& result, const sdbus::Error* error) override
-    {
-        assert(error == nullptr);
-
-        std::stringstream str(result);
-        std::string aString;
-        str >> aString;
-        assert(aString == "sdbus-c++-stress-tests");
-
-        uint32_t aNumber;
-        str >> aNumber;
-        assert(aNumber >= 0);
-
-        ++repliesReceived_;
-    }
-
-    virtual void onConcatenatedSignal(const std::string& concatenatedString) override
-    {
-        std::stringstream str(concatenatedString);
-        std::string aString;
-        str >> aString;
-        assert(aString == "sdbus-c++-stress-tests");
-
-        uint32_t aNumber;
-        str >> aNumber;
-        assert(aNumber >= 0);
-
-        ++signalsReceived_;
-    }
-
-public:
-    std::atomic<uint32_t> repliesReceived_{};
-    std::atomic<uint32_t> signalsReceived_{};
-};
-
-//-----------------------------------------
-int main(int /*argc*/, char */*argv*/[])
-{
-    auto service2Connection = sdbus::createSystemBusConnection(SERVICE_2_BUS_NAME);
-    std::thread service2Thread([&con = *service2Connection]()
-    {
-        CelsiusThermometerAdaptor thermometer(con, CELSIUS_THERMOMETER_OBJECT_PATH);
-        con.enterProcessingLoop();
-    });
-
-    auto service1Connection = sdbus::createSystemBusConnection(SERVICE_1_BUS_NAME);
-    std::thread service1Thread([&con = *service1Connection]()
-    {
-        ConcatenatorAdaptor concatenator(con, CONCATENATOR_OBJECT_PATH);
-        FahrenheitThermometerAdaptor thermometer(con, FAHRENHEIT_THERMOMETER_OBJECT_PATH);
-        con.enterProcessingLoop();
-    });
-
-    std::this_thread::sleep_for(100ms);
-
-    std::atomic<uint32_t> concatenationCallsMade{0};
-    std::atomic<uint32_t> concatenationRepliesReceived{0};
-    std::atomic<uint32_t> concatenationSignalsReceived{0};
-    std::atomic<uint32_t> thermometerCallsMade{0};
-
-    auto clientConnection = sdbus::createSystemBusConnection();
-    std::thread clientThread([&, &con = *clientConnection]()
-    {
-        std::atomic<bool> stopClients{false};
-
-        std::thread concatenatorThread([&]()
-        {
-            ConcatenatorProxy concatenator(con, SERVICE_1_BUS_NAME, CONCATENATOR_OBJECT_PATH);
-
-            uint32_t localCounter{};
-
-            // Issue async concatenate calls densely one after another
-            while (!stopClients)
-            {
-                std::map<std::string, sdbus::Variant> param;
-                param["key1"] = "sdbus-c++-stress-tests";
-                param["key2"] = localCounter++;
-
-                concatenator.concatenate(param);
-
-                if ((localCounter % 10) == 0)
-                {
-                    // Make sure the system is catching up with our async requests,
-                    // otherwise sleep a bit to slow down flooding the server.
-                    assert(localCounter >= concatenator.repliesReceived_);
-                    while ((localCounter - concatenator.repliesReceived_) > 40 && !stopClients)
-                        std::this_thread::sleep_for(1ms);
-
-                    // Update statistics
-                    concatenationCallsMade = localCounter;
-                    concatenationRepliesReceived = (uint32_t)concatenator.repliesReceived_;
-                    concatenationSignalsReceived = (uint32_t)concatenator.signalsReceived_;
-                }
-            }
-        });
-
-        std::thread thermometerThread([&]()
-        {
-            // Here we continuously remotely call getCurrentTemperature(). We have one proxy object,
-            // first we use it's factory interface to create another proxy object, call getCurrentTemperature()
-            // on that one, and then destroy that proxy object. All that continously in a loop.
-            // This tests dynamic creation and destruction of remote D-Bus objects and local object proxies.
-
-            FahrenheitThermometerProxy thermometer(con, SERVICE_1_BUS_NAME, FAHRENHEIT_THERMOMETER_OBJECT_PATH);
-            uint32_t localCounter{};
-            uint32_t previousTemperature{};
-
-            while (!stopClients)
-            {
-                localCounter++;
-
-                auto newObjectPath = thermometer.createDelegateObject();
-				FahrenheitThermometerProxy proxy{con, SERVICE_1_BUS_NAME, newObjectPath};
-
-                auto temperature = proxy.getCurrentTemperature();
-                assert(temperature >= previousTemperature); // The temperature shall rise continually
-                previousTemperature = temperature;
-                //std::this_thread::sleep_for(1ms);
-
-                if ((localCounter % 10) == 0)
-                    thermometerCallsMade = localCounter;
-
-                proxy.~FahrenheitThermometerProxy();
-                thermometer.destroyDelegateObject(newObjectPath);
-            }
-        });
-
-        con.enterProcessingLoop();
-
-        stopClients = true;
-        concatenatorThread.join();
-        thermometerThread.join();
-    });
-
-    std::atomic<bool> exitLogger{};
-    std::thread loggerThread([&]()
-    {
-        while (!exitLogger)
-        {
-            std::this_thread::sleep_for(1s);
-
-            std::cout << "Made " << concatenationCallsMade << " concatenation calls, received " << concatenationRepliesReceived << " replies and " << concatenationSignalsReceived << " signals so far." << std::endl;
-            std::cout << "Made " << thermometerCallsMade << " thermometer calls so far." << std::endl << std::endl;
-        }
-    });
-
-    getchar();
-
-    exitLogger = true;
-    loggerThread.join();
-    clientConnection->leaveProcessingLoop();
-    clientThread.join();
-    service1Connection->leaveProcessingLoop();
-    service1Thread.join();
-    service2Connection->leaveProcessingLoop();
-    service2Thread.join();
-    
-    return 0;
-}

tests/CMakeLists.txt

@@ -21,11 +21,16 @@ if(result)
     message(FATAL_ERROR "Build step for googletest failed: ${result}")
 endif()
 
-set(gtest_force_shared_crt ON CACHE BOOL "" FORCE)
+set(gtest_force_shared_crt ON CACHE INTERNAL "" FORCE)
+set(BUILD_GMOCK ON CACHE INTERNAL "" FORCE)
+set(INSTALL_GTEST OFF CACHE INTERNAL "" FORCE)
 
+set(BUILD_SHARED_LIBS_BAK ${BUILD_SHARED_LIBS})
+set(BUILD_SHARED_LIBS OFF)
 add_subdirectory(${CMAKE_CURRENT_BINARY_DIR}/googletest-src
-    ${CMAKE_CURRENT_BINARY_DIR}/googletest-build
-    EXCLUDE_FROM_ALL)
+                    ${CMAKE_CURRENT_BINARY_DIR}/googletest-build
+                    EXCLUDE_FROM_ALL)
+set(BUILD_SHARED_LIBS ${BUILD_SHARED_LIBS_BAK})
 
 #-------------------------------
 # SOURCE FILES CONFIGURATION
@@ -54,10 +59,10 @@ set(INTEGRATIONTESTS_SRCS
 set(PERFTESTS_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/perftests)
 set(STRESSTESTS_CLIENT_SRCS
     ${PERFTESTS_SOURCE_DIR}/client.cpp
-    ${PERFTESTS_SOURCE_DIR}/perftest-proxy.h)
+    ${PERFTESTS_SOURCE_DIR}/perftests-proxy.h)
 set(STRESSTESTS_SERVER_SRCS
     ${PERFTESTS_SOURCE_DIR}/server.cpp
-    ${PERFTESTS_SOURCE_DIR}/perftest-adaptor.h)
+    ${PERFTESTS_SOURCE_DIR}/perftests-adaptor.h)
 
 set(STRESSTESTS_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/stresstests)
 set(STRESSTESTS_SRCS
@@ -79,11 +84,10 @@ include_directories(${CMAKE_CURRENT_SOURCE_DIR})
 # BUILD INFORMATION
 #----------------------------------
 
-# Turn off -isystem gcc option that CMake uses for imported
-# targets even when INTERFACE_INCLUDE_DIRECTORIES is used.
-set(CMAKE_NO_SYSTEM_FROM_IMPORTED "1")
-
-add_executable(sdbus-c++-unit-tests ${UNITTESTS_SRCS} $<TARGET_OBJECTS:sdbus-cpp>)
+add_executable(sdbus-c++-unit-tests ${UNITTESTS_SRCS} $<TARGET_OBJECTS:sdbus-c++-objlib>)
+target_include_directories(sdbus-c++-unit-tests PRIVATE ${SYSTEMD_INCLUDE_DIRS}
+                                                        ${CMAKE_SOURCE_DIR}/src
+                                                        ${CMAKE_SOURCE_DIR}/include)
 target_link_libraries(sdbus-c++-unit-tests ${SYSTEMD_LIBRARIES} gmock gmock_main)
 
 add_executable(sdbus-c++-integration-tests ${INTEGRATIONTESTS_SRCS})

tests/googletest-download/CMakeLists.txt.in

@@ -1,6 +1,6 @@
 # Taken from https://github.com/google/googletest/blob/master/googletest/README.md#incorporating-into-an-existing-cmake-project
 
-cmake_minimum_required(VERSION 2.8.2)
+cmake_minimum_required(VERSION 3.6)
 
 project(googletest-download NONE)
 
@@ -9,8 +9,10 @@ include(ExternalProject)
 ExternalProject_Add(googletest
     GIT_REPOSITORY    https://github.com/google/googletest.git
     GIT_TAG           master
+    GIT_SHALLOW       1
     SOURCE_DIR        "${CMAKE_CURRENT_BINARY_DIR}/googletest-src"
     BINARY_DIR        "${CMAKE_CURRENT_BINARY_DIR}/googletest-build"
+    UPDATE_COMMAND    ""
     CONFIGURE_COMMAND ""
     BUILD_COMMAND     ""
     INSTALL_COMMAND   ""

tests/integrationtests/AdaptorAndProxy_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file AdaptorAndProxy_test.cpp
  *
@@ -24,9 +25,6 @@
  */
 
 // Own
-#include "Connection.h"
-#include "SdBus.h"
-
 #include "TestingAdaptor.h"
 #include "TestingProxy.h"
 
@@ -46,8 +44,10 @@
 #include <future>
 
 using ::testing::Eq;
+using ::testing::DoubleEq;
 using ::testing::Gt;
 using ::testing::ElementsAre;
+using ::testing::SizeIs;
 using namespace std::chrono_literals;
 
 namespace
@@ -68,6 +68,20 @@ public:
         s_connection->releaseName(INTERFACE_NAME);
     }
 
+    static bool waitUntil(std::atomic<bool>& flag, std::chrono::milliseconds timeout = 5s)
+    {
+        std::chrono::milliseconds elapsed{};
+        std::chrono::milliseconds step{5ms};
+        do {
+            std::this_thread::sleep_for(step);
+            elapsed += step;
+            if (elapsed > timeout)
+                return false;
+        } while (!flag);
+
+        return true;
+    }
+
 private:
     void SetUp() override
     {
@@ -196,6 +210,12 @@ TEST_F(SdbusTestObject, CallsMethodWithObjectPathSuccesfully)
     ASSERT_THAT(resObjectPath, Eq(OBJECT_PATH_VALUE));
 }
 
+TEST_F(SdbusTestObject, CallsMethodWithUnixFdSuccesfully)
+{
+    auto resUnixFd = m_proxy->getUnixFd();
+    ASSERT_THAT(resUnixFd.get(), Gt(UNIX_FD_VALUE));
+}
+
 TEST_F(SdbusTestObject, CallsMethodWithComplexTypeSuccesfully)
 {
     auto resComplex = m_proxy->getComplex();
@@ -206,14 +226,8 @@ TEST_F(SdbusTestObject, CallsMultiplyMethodWithNoReplyFlag)
 {
     m_proxy->multiplyWithNoReply(INT64_VALUE, DOUBLE_VALUE);
 
-    for (auto i = 0; i < 100; ++i)
-    {
-        if (m_adaptor->wasMultiplyCalled())
-            break;
-        std::this_thread::sleep_for(10ms);
-    }
-    ASSERT_TRUE(m_adaptor->wasMultiplyCalled());
-    ASSERT_THAT(m_adaptor->getMultiplyResult(), Eq(INT64_VALUE * DOUBLE_VALUE));
+    ASSERT_TRUE(waitUntil(m_adaptor->m_wasMultiplyCalled));
+    ASSERT_THAT(m_adaptor->m_multiplyResult, Eq(INT64_VALUE * DOUBLE_VALUE));
 }
 
 TEST_F(SdbusTestObject, CallsMethodThatThrowsError)
@@ -238,13 +252,7 @@ TEST_F(SdbusTestObject, CallsErrorThrowingMethodWithDontExpectReplySet)
 {
     ASSERT_NO_THROW(m_proxy->throwErrorWithNoReply());
 
-    for (auto i = 0; i < 100; ++i)
-    {
-        if (m_adaptor->wasThrowErrorCalled())
-            break;
-        std::this_thread::sleep_for(10ms);
-    }
-    ASSERT_TRUE(m_adaptor->wasThrowErrorCalled());
+    ASSERT_TRUE(waitUntil(m_adaptor->m_wasThrowErrorCalled));
 }
 
 TEST_F(SdbusTestObject, RunsServerSideAsynchoronousMethodAsynchronously)
@@ -362,67 +370,226 @@ TEST_F(SdbusTestObject, FailsCallingMethodOnNonexistentObject)
 
 TEST_F(SdbusTestObject, EmitsSimpleSignalSuccesfully)
 {
-    auto count = m_proxy->getSimpleCallCount();
-    m_adaptor->simpleSignal();
-    usleep(10000);
+    m_adaptor->emitSimpleSignal();
 
-    ASSERT_THAT(m_proxy->getSimpleCallCount(), Eq(count + 1));
+    ASSERT_TRUE(waitUntil(m_proxy->m_gotSimpleSignal));
 }
 
 TEST_F(SdbusTestObject, EmitsSignalWithMapSuccesfully)
 {
-    m_adaptor->signalWithMap({{0, "zero"}, {1, "one"}});
-    usleep(10000);
+    m_adaptor->emitSignalWithMap({{0, "zero"}, {1, "one"}});
 
-    auto map = m_proxy->getMap();
-    ASSERT_THAT(map[0], Eq("zero"));
-    ASSERT_THAT(map[1], Eq("one"));
+    ASSERT_TRUE(waitUntil(m_proxy->m_gotSignalWithMap));
+    ASSERT_THAT(m_proxy->m_mapFromSignal[0], Eq("zero"));
+    ASSERT_THAT(m_proxy->m_mapFromSignal[1], Eq("one"));
 }
 
 TEST_F(SdbusTestObject, EmitsSignalWithVariantSuccesfully)
 {
     double d = 3.14;
-    m_adaptor->signalWithVariant(3.14);
-    usleep(10000);
+    m_adaptor->emitSignalWithVariant(d);
 
-    ASSERT_THAT(m_proxy->getVariantValue(), d);
+    ASSERT_TRUE(waitUntil(m_proxy->m_gotSignalWithVariant));
+    ASSERT_THAT(m_proxy->m_variantFromSignal, DoubleEq(d));
 }
 
 TEST_F(SdbusTestObject, EmitsSignalWithoutRegistrationSuccesfully)
 {
-    m_adaptor->signalWithoutRegistration({"platform", {"av"}});
-    usleep(10000);
+    m_adaptor->emitSignalWithoutRegistration({"platform", {"av"}});
 
-    auto signature = m_proxy->getSignatureFromSignal();
-    ASSERT_THAT(signature["platform"], Eq("av"));
+    ASSERT_TRUE(waitUntil(m_proxy->m_gotSignalWithSignature));
+    ASSERT_THAT(m_proxy->m_signatureFromSignal["platform"], Eq("av"));
 }
 
 // Properties
 
-TEST_F(SdbusTestObject, ReadsReadPropertySuccesfully)
+TEST_F(SdbusTestObject, ReadsReadOnlyPropertySuccesfully)
 {
-    ASSERT_THAT(m_proxy->state(), Eq(STRING_VALUE));
+    ASSERT_THAT(m_proxy->state(), Eq(DEFAULT_STATE_VALUE));
+}
+
+TEST_F(SdbusTestObject, FailsWritingToReadOnlyProperty)
+{
+    ASSERT_THROW(m_proxy->state("new_value"), sdbus::Error);
 }
 
 TEST_F(SdbusTestObject, WritesAndReadsReadWritePropertySuccesfully)
 {
-    uint32_t x = 42;
-    ASSERT_NO_THROW(m_proxy->action(x));
-    ASSERT_THAT(m_proxy->action(), Eq(x));
+    uint32_t newActionValue = 5678;
+
+    m_proxy->action(newActionValue);
+
+    ASSERT_THAT(m_proxy->action(), Eq(newActionValue));
 }
 
-TEST_F(SdbusTestObject, WritesToWritePropertySuccesfully)
+// Standard D-Bus interfaces
+
+TEST_F(SdbusTestObject, PingsViaPeerInterface)
 {
-    auto x = true;
-    ASSERT_NO_THROW(m_proxy->blocking(x));
+    ASSERT_NO_THROW(m_proxy->Ping());
 }
 
-TEST_F(SdbusTestObject, CannotReadFromWriteProperty)
+TEST_F(SdbusTestObject, AnswersMachineUuidViaPeerInterface)
 {
-    ASSERT_THROW(m_proxy->blocking(), sdbus::Error);
+    ASSERT_NO_THROW(m_proxy->GetMachineId());
 }
 
-TEST_F(SdbusTestObject, AnswersXmlApiDescriptionOnIntrospection)
+TEST_F(SdbusTestObject, AnswersXmlApiDescriptionViaIntrospectableInterface)
 {
     ASSERT_THAT(m_proxy->Introspect(), Eq(m_adaptor->getExpectedXmlApiDescription()));
 }
+
+TEST_F(SdbusTestObject, GetsPropertyViaPropertiesInterface)
+{
+    ASSERT_THAT(m_proxy->Get(INTERFACE_NAME, "state").get<std::string>(), Eq(DEFAULT_STATE_VALUE));
+}
+
+TEST_F(SdbusTestObject, SetsPropertyViaPropertiesInterface)
+{
+    uint32_t newActionValue = 2345;
+
+    m_proxy->Set(INTERFACE_NAME, "action", newActionValue);
+
+    ASSERT_THAT(m_proxy->action(), Eq(newActionValue));
+}
+
+TEST_F(SdbusTestObject, GetsAllPropertiesViaPropertiesInterface)
+{
+    const auto properties = m_proxy->GetAll(INTERFACE_NAME);
+
+    ASSERT_THAT(properties, SizeIs(3));
+    EXPECT_THAT(properties.at("state").get<std::string>(), Eq(DEFAULT_STATE_VALUE));
+    EXPECT_THAT(properties.at("action").get<uint32_t>(), Eq(DEFAULT_ACTION_VALUE));
+    EXPECT_THAT(properties.at("blocking").get<bool>(), Eq(DEFAULT_BLOCKING_VALUE));
+}
+
+TEST_F(SdbusTestObject, EmitsPropertyChangedSignalForSelectedProperties)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onPropertiesChangedHandler = [&signalReceived]( const std::string& interfaceName
+                                                             , const std::map<std::string, sdbus::Variant>& changedProperties
+                                                             , const std::vector<std::string>& /*invalidatedProperties*/ )
+    {
+        EXPECT_THAT(interfaceName, Eq(INTERFACE_NAME));
+        EXPECT_THAT(changedProperties, SizeIs(1));
+        EXPECT_THAT(changedProperties.at("blocking").get<bool>(), Eq(!DEFAULT_BLOCKING_VALUE));
+        signalReceived = true;
+    };
+
+    m_proxy->blocking(!DEFAULT_BLOCKING_VALUE);
+    m_proxy->action(DEFAULT_ACTION_VALUE*2);
+    m_adaptor->emitPropertiesChangedSignal(INTERFACE_NAME, {"blocking"});
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}
+
+TEST_F(SdbusTestObject, EmitsPropertyChangedSignalForAllProperties)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onPropertiesChangedHandler = [&signalReceived]( const std::string& interfaceName
+                                                             , const std::map<std::string, sdbus::Variant>& changedProperties
+                                                             , const std::vector<std::string>& invalidatedProperties )
+    {
+        EXPECT_THAT(interfaceName, Eq(INTERFACE_NAME));
+        EXPECT_THAT(changedProperties, SizeIs(1));
+        EXPECT_THAT(changedProperties.at("blocking").get<bool>(), Eq(DEFAULT_BLOCKING_VALUE));
+        ASSERT_THAT(invalidatedProperties, SizeIs(1));
+        EXPECT_THAT(invalidatedProperties[0], Eq("action"));
+        signalReceived = true;
+    };
+
+    m_adaptor->emitPropertiesChangedSignal(INTERFACE_NAME);
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}
+
+TEST_F(SdbusTestObject, GetsZeroManagedObjectsIfHasNoSubPathObjects)
+{
+    const auto objectsInterfacesAndProperties = m_proxy->GetManagedObjects();
+
+    ASSERT_THAT(objectsInterfacesAndProperties, SizeIs(0));
+}
+
+TEST_F(SdbusTestObject, GetsManagedObjectsSuccessfully)
+{
+    auto subObject1 = sdbus::createObject(*s_connection, "/sub/path1");
+    subObject1->registerProperty("aProperty1").onInterface("org.sdbuscpp.integrationtests.iface1").withGetter([]{return uint8_t{123};});
+    subObject1->finishRegistration();
+    auto subObject2 = sdbus::createObject(*s_connection, "/sub/path2");
+    subObject2->registerProperty("aProperty2").onInterface("org.sdbuscpp.integrationtests.iface2").withGetter([]{return "hi";});
+    subObject2->finishRegistration();
+
+    const auto objectsInterfacesAndProperties = m_proxy->GetManagedObjects();
+
+    ASSERT_THAT(objectsInterfacesAndProperties, SizeIs(2));
+    EXPECT_THAT(objectsInterfacesAndProperties.at("/sub/path1").at("org.sdbuscpp.integrationtests.iface1").at("aProperty1").get<uint8_t>(), Eq(123));
+    EXPECT_THAT(objectsInterfacesAndProperties.at("/sub/path2").at("org.sdbuscpp.integrationtests.iface2").at("aProperty2").get<std::string>(), Eq("hi"));
+}
+
+TEST_F(SdbusTestObject, EmitsInterfacesAddedSignalForSelectedObjectInterfaces)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onInterfacesAddedHandler = [&signalReceived]( const sdbus::ObjectPath& objectPath
+                                                           , const std::map<std::string, std::map<std::string, sdbus::Variant>>& interfacesAndProperties )
+    {
+        EXPECT_THAT(objectPath, Eq(OBJECT_PATH));
+        EXPECT_THAT(interfacesAndProperties, SizeIs(1));
+        EXPECT_THAT(interfacesAndProperties.count(INTERFACE_NAME), Eq(1));
+        EXPECT_THAT(interfacesAndProperties.at(INTERFACE_NAME), SizeIs(3));
+        signalReceived = true;
+    };
+
+    m_adaptor->emitInterfacesAddedSignal({INTERFACE_NAME});
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}
+
+TEST_F(SdbusTestObject, EmitsInterfacesAddedSignalForAllObjectInterfaces)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onInterfacesAddedHandler = [&signalReceived]( const sdbus::ObjectPath& objectPath
+                                                           , const std::map<std::string, std::map<std::string, sdbus::Variant>>& interfacesAndProperties )
+    {
+        EXPECT_THAT(objectPath, Eq(OBJECT_PATH));
+        EXPECT_THAT(interfacesAndProperties, SizeIs(5)); // INTERFACE_NAME + 4 standard interfaces
+        EXPECT_THAT(interfacesAndProperties.at(INTERFACE_NAME), SizeIs(3)); // 3 properties under INTERFACE_NAME
+        signalReceived = true;
+    };
+
+    m_adaptor->emitInterfacesAddedSignal();
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}
+
+TEST_F(SdbusTestObject, EmitsInterfacesRemovedSignalForSelectedObjectInterfaces)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onInterfacesRemovedHandler = [&signalReceived]( const sdbus::ObjectPath& objectPath
+                                                             , const std::vector<std::string>& interfaces )
+    {
+        EXPECT_THAT(objectPath, Eq(OBJECT_PATH));
+        ASSERT_THAT(interfaces, SizeIs(1));
+        EXPECT_THAT(interfaces[0], Eq(INTERFACE_NAME));
+        signalReceived = true;
+    };
+
+    m_adaptor->emitInterfacesRemovedSignal({INTERFACE_NAME});
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}
+
+TEST_F(SdbusTestObject, EmitsInterfacesRemovedSignalForAllObjectInterfaces)
+{
+    std::atomic<bool> signalReceived{false};
+    m_proxy->m_onInterfacesRemovedHandler = [&signalReceived]( const sdbus::ObjectPath& objectPath
+                                                             , const std::vector<std::string>& interfaces )
+    {
+        EXPECT_THAT(objectPath, Eq(OBJECT_PATH));
+        ASSERT_THAT(interfaces, SizeIs(5)); // INTERFACE_NAME + 4 standard interfaces
+        signalReceived = true;
+    };
+
+    m_adaptor->emitInterfacesRemovedSignal();
+
+    ASSERT_TRUE(waitUntil(signalReceived));
+}

tests/integrationtests/Connection_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Connection_test.cpp
  *

tests/integrationtests/TestingAdaptor.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file TestingAdaptor.h
  *
@@ -31,32 +32,47 @@
 #include <chrono>
 #include <atomic>
 
-class TestingAdaptor : public sdbus::Interfaces<testing_adaptor>
+class TestingAdaptor : public sdbus::AdaptorInterfaces< testing_adaptor
+                                                      , sdbus::Properties_adaptor
+                                                      , sdbus::ObjectManager_adaptor >
 {
 public:
     TestingAdaptor(sdbus::IConnection& connection) :
-        sdbus::Interfaces<::testing_adaptor>(connection, OBJECT_PATH) { }
+        AdaptorInterfaces(connection, OBJECT_PATH)
+    {
+        registerAdaptor();
+    }
 
-    virtual ~TestingAdaptor() { }
-
-    bool wasMultiplyCalled() const { return m_multiplyCalled; }
-    double getMultiplyResult() const { return m_multiplyResult; }
-    bool wasThrowErrorCalled() const { return m_throwErrorCalled; }
+    ~TestingAdaptor()
+    {
+        unregisterAdaptor();
+    }
 
 protected:
 
-    void noArgNoReturn() const {}
+    void noArgNoReturn() const
+    {
+    }
 
-    int32_t getInt() const { return INT32_VALUE; }
+    int32_t getInt() const
+    {
+        return INT32_VALUE;
+    }
 
-    std::tuple<uint32_t, std::string> getTuple() const { return std::make_tuple(UINT32_VALUE, STRING_VALUE); }
+    std::tuple<uint32_t, std::string> getTuple() const
+    {
+        return std::make_tuple(UINT32_VALUE, STRING_VALUE);
+    }
 
-    double multiply(const int64_t& a, const double& b) const { return a * b; }
+    double multiply(const int64_t& a, const double& b) const
+    {
+        return a * b;
+    }
 
     void multiplyWithNoReply(const int64_t& a, const double& b) const
     {
         m_multiplyResult = a * b;
-        m_multiplyCalled = true;
+        m_wasMultiplyCalled = true;
     }
 
     std::vector<int16_t> getInts16FromStruct(const sdbus::Struct<uint8_t, int16_t, double, std::string, std::vector<int16_t>>& x) const
@@ -134,8 +150,18 @@ protected:
         }
     }
 
-    sdbus::Signature getSignature() const { return SIGNATURE_VALUE; }
-    sdbus::ObjectPath getObjectPath() const { return OBJECT_PATH_VALUE; }
+    sdbus::Signature getSignature() const
+    {
+        return SIGNATURE_VALUE;
+    }
+    sdbus::ObjectPath getObjectPath() const
+    {
+        return OBJECT_PATH_VALUE;
+    }
+    sdbus::UnixFd getUnixFd() const
+    {
+        return sdbus::UnixFd{UNIX_FD_VALUE};
+    }
 
     ComplexType getComplex() const
     {
@@ -167,24 +193,45 @@ protected:
 
     void throwError() const
     {
-        m_throwErrorCalled = true;
+        m_wasThrowErrorCalled = true;
         throw sdbus::createError(1, "A test error occurred");
     }
 
-    std::string state() { return STRING_VALUE; }
-    uint32_t action() { return m_action; }
-    void action(const uint32_t& value) { m_action = value; }
-    bool blocking() { return m_blocking; }
-    void blocking(const bool& value) { m_blocking = value; }
+    std::string state()
+    {
+        return m_state;
+    }
+
+    uint32_t action()
+    {
+        return m_action;
+    }
+
+    void action(const uint32_t& value)
+    {
+        m_action = value;
+    }
+
+    bool blocking()
+    {
+        return m_blocking;
+    }
+
+    void blocking(const bool& value)
+    {
+        m_blocking = value;
+    }
 
 private:
-    uint32_t m_action;
-    bool m_blocking;
+    const std::string m_state{DEFAULT_STATE_VALUE};
+    uint32_t m_action{DEFAULT_ACTION_VALUE};
+    bool m_blocking{DEFAULT_BLOCKING_VALUE};
 
+public: // for tests
     // For dont-expect-reply method call verifications
-    mutable std::atomic<bool> m_multiplyCalled{};
+    mutable std::atomic<bool> m_wasMultiplyCalled{false};
     mutable double m_multiplyResult{};
-    mutable std::atomic<bool> m_throwErrorCalled{};
+    mutable std::atomic<bool> m_wasThrowErrorCalled{false};
 };
 
 

tests/integrationtests/TestingProxy.h

@@ -0,0 +1,127 @@
+/**
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
+ *
+ * @file TestingProxy.h
+ *
+ * Created on: Jan 2, 2017
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_
+#define SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_
+
+#include "proxy-glue.h"
+#include <atomic>
+
+class TestingProxy : public sdbus::ProxyInterfaces< ::testing_proxy
+                                                  , sdbus::Peer_proxy
+                                                  , sdbus::Introspectable_proxy
+                                                  , sdbus::Properties_proxy
+                                                  , sdbus::ObjectManager_proxy >
+{
+public:
+    TestingProxy(std::string destination, std::string objectPath)
+        : ProxyInterfaces(std::move(destination), std::move(objectPath))
+    {
+        registerProxy();
+    }
+
+    ~TestingProxy()
+    {
+        unregisterProxy();
+    }
+
+    void installDoOperationClientSideAsyncReplyHandler(std::function<void(uint32_t res, const sdbus::Error* err)> handler)
+    {
+        m_DoOperationClientSideAsyncReplyHandler = handler;
+    }
+
+protected:
+    void onSimpleSignal() override
+    {
+        m_gotSimpleSignal = true;
+    }
+
+    void onSignalWithMap(const std::map<int32_t, std::string>& m) override
+    {
+        m_mapFromSignal = m;
+        m_gotSignalWithMap = true;
+    }
+
+    void onSignalWithVariant(const sdbus::Variant& v) override
+    {
+        m_variantFromSignal = v.get<double>();
+        m_gotSignalWithVariant = true;
+    }
+
+    void onSignalWithoutRegistration(const sdbus::Struct<std::string, sdbus::Struct<sdbus::Signature>>& s) override
+    {
+        m_signatureFromSignal[std::get<0>(s)] = static_cast<std::string>(std::get<0>(std::get<1>(s)));
+        m_gotSignalWithSignature = true;
+    }
+
+    void onDoOperationReply(uint32_t returnValue, const sdbus::Error* error) override
+    {
+        if (m_DoOperationClientSideAsyncReplyHandler)
+            m_DoOperationClientSideAsyncReplyHandler(returnValue, error);
+    }
+
+    // Signals of standard D-Bus interfaces
+
+    void onPropertiesChanged( const std::string& interfaceName
+                            , const std::map<std::string, sdbus::Variant>& changedProperties
+                            , const std::vector<std::string>& invalidatedProperties ) override
+    {
+        if (m_onPropertiesChangedHandler)
+            m_onPropertiesChangedHandler(interfaceName, changedProperties, invalidatedProperties);
+    }
+
+    void onInterfacesAdded( const sdbus::ObjectPath& objectPath
+                          , const std::map<std::string, std::map<std::string, sdbus::Variant>>& interfacesAndProperties) override
+    {
+        if (m_onInterfacesAddedHandler)
+            m_onInterfacesAddedHandler(objectPath, interfacesAndProperties);
+    }
+    void onInterfacesRemoved( const sdbus::ObjectPath& objectPath
+                            , const std::vector<std::string>& interfaces) override
+    {
+        if (m_onInterfacesRemovedHandler)
+            m_onInterfacesRemovedHandler(objectPath, interfaces);
+    }
+
+//private:
+public: // for tests
+    std::atomic<bool> m_gotSimpleSignal{false};
+    std::atomic<bool> m_gotSignalWithMap{false};
+    std::map<int32_t, std::string> m_mapFromSignal;
+    std::atomic<bool> m_gotSignalWithVariant{false};
+    double m_variantFromSignal;
+    std::atomic<bool> m_gotSignalWithSignature{false};
+    std::map<std::string, std::string> m_signatureFromSignal;
+
+    std::function<void(uint32_t res, const sdbus::Error* err)> m_DoOperationClientSideAsyncReplyHandler;
+    std::function<void(const std::string&, const std::map<std::string, sdbus::Variant>&, const std::vector<std::string>&)> m_onPropertiesChangedHandler;
+    std::function<void(const sdbus::ObjectPath&, const std::map<std::string, std::map<std::string, sdbus::Variant>>&)> m_onInterfacesAddedHandler;
+    std::function<void(const sdbus::ObjectPath&, const std::vector<std::string>&)> m_onInterfacesRemovedHandler;
+};
+
+
+
+#endif /* SDBUS_CPP_INTEGRATIONTESTS_TESTINGPROXY_H_ */

tests/integrationtests/adaptor-glue.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file adaptor-glue.h
  *
@@ -52,7 +53,6 @@ using ComplexType = std::map<
 
 class testing_adaptor
 {
-
 protected:
     testing_adaptor(sdbus::IObject& object) :
         object_(object)
@@ -97,6 +97,7 @@ protected:
 
         object_.registerMethod("getSignature").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getSignature(); });
         object_.registerMethod("getObjectPath").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getObjectPath(); });
+        object_.registerMethod("getUnixFd").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getUnixFd(); });
 
         object_.registerMethod("getComplex").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getComplex(); }).markAsDeprecated();
 
@@ -111,28 +112,30 @@ protected:
         object_.registerSignal("signalWithVariant").onInterface(INTERFACE_NAME).withParameters<sdbus::Variant>();
 
         object_.registerProperty("state").onInterface(INTERFACE_NAME).withGetter([this](){ return this->state(); }).markAsDeprecated().withUpdateBehavior(sdbus::Flags::CONST_PROPERTY_VALUE);
-        object_.registerProperty("action").onInterface(INTERFACE_NAME).withGetter([this](){ return this->action(); }).withSetter([this](const uint32_t& value){ this->action(value); }).withUpdateBehavior(sdbus::Flags::EMITS_NO_SIGNAL);
-        object_.registerProperty("blocking").onInterface(INTERFACE_NAME)./*withGetter([this](){ return this->blocking(); }).*/withSetter([this](const bool& value){ this->blocking(value); });
-
+        object_.registerProperty("action").onInterface(INTERFACE_NAME).withGetter([this](){ return this->action(); }).withSetter([this](const uint32_t& value){ this->action(value); }).withUpdateBehavior(sdbus::Flags::EMITS_INVALIDATION_SIGNAL);
+        //object_.registerProperty("blocking").onInterface(INTERFACE_NAME)./*withGetter([this](){ return this->blocking(); }).*/withSetter([this](const bool& value){ this->blocking(value); });
+        object_.registerProperty("blocking").onInterface(INTERFACE_NAME).withGetter([this](){ return this->blocking(); }).withSetter([this](const bool& value){ this->blocking(value); });
     }
 
+    ~testing_adaptor() = default;
+
 public:
-    void simpleSignal()
+    void emitSimpleSignal()
     {
         object_.emitSignal("simpleSignal").onInterface(INTERFACE_NAME);
     }
 
-    void signalWithMap(const std::map<int32_t, std::string>& map)
+    void emitSignalWithMap(const std::map<int32_t, std::string>& map)
     {
         object_.emitSignal("signalWithMap").onInterface(INTERFACE_NAME).withArguments(map);
     }
 
-    void signalWithVariant(const sdbus::Variant& v)
+    void emitSignalWithVariant(const sdbus::Variant& v)
     {
         object_.emitSignal("signalWithVariant").onInterface(INTERFACE_NAME).withArguments(v);
     }
 
-    void signalWithoutRegistration(const sdbus::Struct<std::string, sdbus::Struct<sdbus::Signature>>& s)
+    void emitSignalWithoutRegistration(const sdbus::Struct<std::string, sdbus::Struct<sdbus::Signature>>& s)
     {
         object_.emitSignal("signalWithoutRegistration").onInterface(INTERFACE_NAME).withArguments(s);
     }
@@ -162,6 +165,7 @@ protected:
     virtual void doOperationAsync(uint32_t param, sdbus::Result<uint32_t> result) = 0;
     virtual sdbus::Signature getSignature() const  = 0;
     virtual sdbus::ObjectPath getObjectPath() const = 0;
+    virtual sdbus::UnixFd getUnixFd() const  = 0;
     virtual ComplexType getComplex() const = 0;
     virtual void throwError() const = 0;
 
@@ -210,6 +214,19 @@ R"delimiter(<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspectio
    <arg type="as" name="invalidated_properties"/>
   </signal>
  </interface>
+ <interface name="org.freedesktop.DBus.ObjectManager">
+  <method name="GetManagedObjects">
+   <arg type="a{oa{sa{sv}}}" name="object_paths_interfaces_and_properties" direction="out"/>
+  </method>
+  <signal name="InterfacesAdded">
+   <arg type="o" name="object_path"/>
+   <arg type="a{sa{sv}}" name="interfaces_and_properties"/>
+  </signal>
+  <signal name="InterfacesRemoved">
+   <arg type="o" name="object_path"/>
+   <arg type="as" name="interfaces"/>
+  </signal>
+ </interface>
  <interface name="org.sdbuscpp.integrationtests">
   <annotation name="org.freedesktop.DBus.Deprecated" value="true"/>
   <method name="doOperation">
@@ -252,6 +269,9 @@ R"delimiter(<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspectio
    <arg type="u" direction="out"/>
    <arg type="s" direction="out"/>
   </method>
+  <method name="getUnixFd">
+   <arg type="h" direction="out"/>
+  </method>
   <method name="multiply">
    <arg type="x" direction="in"/>
    <arg type="d" direction="in"/>
@@ -294,7 +314,7 @@ R"delimiter(<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspectio
    <annotation name="org.freedesktop.DBus.Deprecated" value="true"/>
   </signal>
   <property name="action" type="u" access="readwrite">
-   <annotation name="org.freedesktop.DBus.Property.EmitsChangedSignal" value="false"/>
+   <annotation name="org.freedesktop.DBus.Property.EmitsChangedSignal" value="invalidates"/>
   </property>
   <property name="blocking" type="b" access="readwrite">
   </property>

tests/integrationtests/defs.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file defs.h
  *
@@ -40,6 +41,11 @@ constexpr const int32_t INT64_VALUE{-1024};
 const std::string STRING_VALUE{"sdbus-c++-testing"};
 const sdbus::Signature SIGNATURE_VALUE{"a{is}"};
 const sdbus::ObjectPath OBJECT_PATH_VALUE{"/"};
+const int UNIX_FD_VALUE = 0;
+
+const std::string DEFAULT_STATE_VALUE{"default-state-value"};
+const uint32_t DEFAULT_ACTION_VALUE{999};
+const bool DEFAULT_BLOCKING_VALUE{true};
 
 constexpr const double DOUBLE_VALUE{3.24L};
 

tests/integrationtests/proxy-glue.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file proxy-glue.h
  *
@@ -34,7 +35,7 @@
 class testing_proxy
 {
 protected:
-    testing_proxy(sdbus::IObjectProxy& object) :
+    testing_proxy(sdbus::IProxy& object) :
         object_(object)
     {
         object_.uponSignal("simpleSignal").onInterface(INTERFACE_NAME).call([this](){ this->onSimpleSignal(); });
@@ -45,6 +46,8 @@ protected:
                 { this->onSignalWithoutRegistration(s); });
     }
 
+    ~testing_proxy() = default;
+
     virtual void onSimpleSignal() = 0;
     virtual void onSignalWithMap(const std::map<int32_t, std::string>& map) = 0;
     virtual void onSignalWithVariant(const sdbus::Variant& v) = 0;
@@ -140,23 +143,25 @@ public:
         return result;
     }
 
-    uint32_t doOperationClientSideAsync(uint32_t param)
+    void doOperationClientSideAsync(uint32_t param)
     {
         object_.callMethodAsync("doOperation")
                .onInterface(INTERFACE_NAME)
                .withArguments(param)
                .uponReplyInvoke([this](const sdbus::Error* error, uint32_t returnValue)
-        {
-            this->onDoOperationReply(returnValue, error);
-        });
+                                {
+                                    this->onDoOperationReply(returnValue, error);
+                                });
     }
 
-    uint32_t doErroneousOperationClientSideAsync()
+    void doErroneousOperationClientSideAsync()
     {
-        object_.callMethodAsync("throwError").onInterface(INTERFACE_NAME).uponReplyInvoke([this](const sdbus::Error* error)
-        {
-            this->onDoOperationReply(0, error);
-        });
+        object_.callMethodAsync("throwError")
+               .onInterface(INTERFACE_NAME)
+               .uponReplyInvoke([this](const sdbus::Error* error)
+                                {
+                                    this->onDoOperationReply(0, error);
+                                });
     }
 
     sdbus::Signature getSignature()
@@ -173,6 +178,13 @@ public:
         return result;
     }
 
+    sdbus::UnixFd getUnixFd()
+    {
+        sdbus::UnixFd result;
+        object_.callMethod("getUnixFd").onInterface(INTERFACE_NAME).storeResultsTo(result);
+        return result;
+    }
+
     ComplexType getComplex()
     {
         ComplexType result;
@@ -209,6 +221,11 @@ public:
         return object_.getProperty("state").onInterface(INTERFACE_NAME);
     }
 
+    void state(const std::string& value)
+    {
+        object_.setProperty("state").onInterface(INTERFACE_NAME).toValue(value);
+    }
+
     uint32_t action()
     {
         return object_.getProperty("action").onInterface(INTERFACE_NAME);
@@ -231,7 +248,7 @@ public:
 
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& object_;
 
 };
 

tests/integrationtests/sdbus-c++-integration-tests.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file sdbus-c++-integration-tests.cpp
  *

tests/perftests/client.cpp

@@ -23,7 +23,7 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "perftest-proxy.h"
+#include "perftests-proxy.h"
 #include <sdbus-c++/sdbus-c++.h>
 #include <vector>
 #include <string>
@@ -33,15 +33,22 @@
 #include <chrono>
 #include <cassert>
 #include <algorithm>
+#include <iostream>
 
 using namespace std::chrono_literals;
 
-class PerftestClient : public sdbus::ProxyInterfaces<org::sdbuscpp::perftest_proxy>
+class PerftestProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::perftests_proxy>
 {
 public:
-    PerftestClient(std::string destination, std::string objectPath)
-        : sdbus::ProxyInterfaces<org::sdbuscpp::perftest_proxy>(std::move(destination), std::move(objectPath))
+    PerftestProxy(std::string destination, std::string objectPath)
+        : ProxyInterfaces(std::move(destination), std::move(objectPath))
     {
+        registerProxy();
+    }
+
+    ~PerftestProxy()
+    {
+        unregisterProxy();
     }
 
 protected:
@@ -91,7 +98,7 @@ int main(int /*argc*/, char */*argv*/[])
 {
     const char* destinationName = "org.sdbuscpp.perftests";
     const char* objectPath = "/org/sdbuscpp/perftests";
-    PerftestClient client(destinationName, objectPath);
+    PerftestProxy client(destinationName, objectPath);
 
     const unsigned int repetitions{20};
     unsigned int msgCount = 1000;

tests/perftests/org.sdbuscpp.perftests.xml

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 
 <node name="/org/sdbuscpp/perftest">
-    <interface name="org.sdbuscpp.perftest">
+    <interface name="org.sdbuscpp.perftests">
         <method name="sendDataSignals">
             <arg type="u" name="numberOfSignals" direction="in" />
             <arg type="u" name="signalMsgSize" direction="in" />

tests/perftests/perftests-adaptor.h

@@ -0,0 +1,48 @@
+
+/*
+ * This file was automatically generated by sdbus-c++-xml2cpp; DO NOT EDIT!
+ */
+
+#ifndef __sdbuscpp__perftests_adaptor_h__adaptor__H__
+#define __sdbuscpp__perftests_adaptor_h__adaptor__H__
+
+#include <sdbus-c++/sdbus-c++.h>
+#include <string>
+#include <tuple>
+
+namespace org {
+namespace sdbuscpp {
+
+class perftests_adaptor
+{
+public:
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.perftests";
+
+protected:
+    perftests_adaptor(sdbus::IObject& object)
+        : object_(object)
+    {
+        object_.registerMethod("sendDataSignals").onInterface(INTERFACE_NAME).implementedAs([this](const uint32_t& numberOfSignals, const uint32_t& signalMsgSize){ return this->sendDataSignals(numberOfSignals, signalMsgSize); });
+        object_.registerMethod("concatenateTwoStrings").onInterface(INTERFACE_NAME).implementedAs([this](const std::string& string1, const std::string& string2){ return this->concatenateTwoStrings(string1, string2); });
+        object_.registerSignal("dataSignal").onInterface(INTERFACE_NAME).withParameters<std::string>();
+    }
+
+    ~perftests_adaptor() = default;
+
+public:
+    void emitDataSignal(const std::string& data)
+    {
+        object_.emitSignal("dataSignal").onInterface(INTERFACE_NAME).withArguments(data);
+    }
+
+private:
+    virtual void sendDataSignals(const uint32_t& numberOfSignals, const uint32_t& signalMsgSize) = 0;
+    virtual std::string concatenateTwoStrings(const std::string& string1, const std::string& string2) = 0;
+
+private:
+    sdbus::IObject& object_;
+};
+
+}} // namespaces
+
+#endif

tests/perftests/perftests-proxy.h

@@ -0,0 +1,51 @@
+
+/*
+ * This file was automatically generated by sdbus-c++-xml2cpp; DO NOT EDIT!
+ */
+
+#ifndef __sdbuscpp__perftests_proxy_h__proxy__H__
+#define __sdbuscpp__perftests_proxy_h__proxy__H__
+
+#include <sdbus-c++/sdbus-c++.h>
+#include <string>
+#include <tuple>
+
+namespace org {
+namespace sdbuscpp {
+
+class perftests_proxy
+{
+public:
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.perftests";
+
+protected:
+    perftests_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
+    {
+        proxy_.uponSignal("dataSignal").onInterface(INTERFACE_NAME).call([this](const std::string& data){ this->onDataSignal(data); });
+    }
+
+    ~perftests_proxy() = default;
+
+    virtual void onDataSignal(const std::string& data) = 0;
+
+public:
+    void sendDataSignals(const uint32_t& numberOfSignals, const uint32_t& signalMsgSize)
+    {
+        proxy_.callMethod("sendDataSignals").onInterface(INTERFACE_NAME).withArguments(numberOfSignals, signalMsgSize);
+    }
+
+    std::string concatenateTwoStrings(const std::string& string1, const std::string& string2)
+    {
+        std::string result;
+        proxy_.callMethod("concatenateTwoStrings").onInterface(INTERFACE_NAME).withArguments(string1, string2).storeResultsTo(result);
+        return result;
+    }
+
+private:
+    sdbus::IProxy& proxy_;
+};
+
+}} // namespaces
+
+#endif

tests/perftests/server.cpp

@@ -23,42 +23,48 @@
  * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "perftest-adaptor.h"
+#include "perftests-adaptor.h"
 #include <sdbus-c++/sdbus-c++.h>
 #include <vector>
 #include <string>
 #include <thread>
 #include <chrono>
 #include <algorithm>
+#include <iostream>
 
 using namespace std::chrono_literals;
 
 std::string createRandomString(size_t length);
 
-class PerftestServer : public sdbus::Interfaces<org::sdbuscpp::perftest_adaptor>
+class PerftestAdaptor : public sdbus::AdaptorInterfaces<org::sdbuscpp::perftests_adaptor>
 {
 public:
-    PerftestServer(sdbus::IConnection& connection, std::string objectPath)
-        : sdbus::Interfaces<org::sdbuscpp::perftest_adaptor>(connection, std::move(objectPath))
+    PerftestAdaptor(sdbus::IConnection& connection, std::string objectPath)
+        : AdaptorInterfaces(connection, std::move(objectPath))
     {
+        registerAdaptor();
+    }
+
+    ~PerftestAdaptor()
+    {
+        unregisterAdaptor();
     }
 
 protected:
     virtual void sendDataSignals(const uint32_t& numberOfSignals, const uint32_t& signalMsgSize) override
     {
         auto data = createRandomString(signalMsgSize);
-        char digits[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9'};
-        
+
         auto start_time = std::chrono::steady_clock::now();
         for (uint32_t i = 0; i < numberOfSignals; ++i)
         {
             // Emit signal
-            dataSignal(data);
+            emitDataSignal(data);
         }
         auto stop_time = std::chrono::steady_clock::now();
         std::cout << "Server sent " << numberOfSignals << " signals in: " << std::chrono::duration_cast<std::chrono::milliseconds>(stop_time - start_time).count() << " ms" << std::endl;
     }
-    
+
     virtual std::string concatenateTwoStrings(const std::string& string1, const std::string& string2) override
     {
         return string1 + string2;
@@ -89,7 +95,7 @@ int main(int /*argc*/, char */*argv*/[])
     auto connection = sdbus::createSystemBusConnection(serviceName);
 
     const char* objectPath = "/org/sdbuscpp/perftests";
-    PerftestServer server(*connection, objectPath);
+    PerftestAdaptor server(*connection, objectPath);
 
     connection->enterProcessingLoop();
 }

tests/stresstests/celsius-thermometer-adaptor.h

@@ -18,15 +18,17 @@ namespace celsius {
 class thermometer_adaptor
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.celsius.thermometer";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.celsius.thermometer";
 
 protected:
     thermometer_adaptor(sdbus::IObject& object)
         : object_(object)
     {
-        object_.registerMethod("getCurrentTemperature").onInterface(interfaceName).implementedAs([this](){ return this->getCurrentTemperature(); });
+        object_.registerMethod("getCurrentTemperature").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getCurrentTemperature(); });
     }
 
+    ~thermometer_adaptor() = default;
+
 private:
     virtual uint32_t getCurrentTemperature() = 0;
 

tests/stresstests/celsius-thermometer-proxy.h

@@ -18,24 +18,26 @@ namespace celsius {
 class thermometer_proxy
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.celsius.thermometer";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.celsius.thermometer";
 
 protected:
-    thermometer_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
+    thermometer_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
     {
     }
 
+    ~thermometer_proxy() = default;
+
 public:
     uint32_t getCurrentTemperature()
     {
         uint32_t result;
-        object_.callMethod("getCurrentTemperature").onInterface(interfaceName).storeResultsTo(result);
+        proxy_.callMethod("getCurrentTemperature").onInterface(INTERFACE_NAME).storeResultsTo(result);
         return result;
     }
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& proxy_;
 };
 
 }}}} // namespaces

tests/stresstests/concatenator-adaptor.h

@@ -17,20 +17,22 @@ namespace stresstests {
 class concatenator_adaptor
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.concatenator";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.concatenator";
 
 protected:
     concatenator_adaptor(sdbus::IObject& object)
         : object_(object)
     {
-        object_.registerMethod("concatenate").onInterface(interfaceName).implementedAs([this](sdbus::Result<std::string>&& result, std::map<std::string, sdbus::Variant> params){ this->concatenate(std::move(result), std::move(params)); });
-        object_.registerSignal("concatenatedSignal").onInterface(interfaceName).withParameters<std::string>();
+        object_.registerMethod("concatenate").onInterface(INTERFACE_NAME).implementedAs([this](sdbus::Result<std::string>&& result, std::map<std::string, sdbus::Variant> params){ this->concatenate(std::move(result), std::move(params)); });
+        object_.registerSignal("concatenatedSignal").onInterface(INTERFACE_NAME).withParameters<std::string>();
     }
 
+    ~concatenator_adaptor() = default;
+
 public:
-    void concatenatedSignal(const std::string& concatenatedString)
+    void emitConcatenatedSignal(const std::string& concatenatedString)
     {
-        object_.emitSignal("concatenatedSignal").onInterface(interfaceName).withArguments(concatenatedString);
+        object_.emitSignal("concatenatedSignal").onInterface(INTERFACE_NAME).withArguments(concatenatedString);
     }
 
 private:

tests/stresstests/concatenator-proxy.h

@@ -17,15 +17,17 @@ namespace stresstests {
 class concatenator_proxy
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.concatenator";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.concatenator";
 
 protected:
-    concatenator_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
+    concatenator_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
     {
-        object_.uponSignal("concatenatedSignal").onInterface(interfaceName).call([this](const std::string& concatenatedString){ this->onConcatenatedSignal(concatenatedString); });
+        proxy_.uponSignal("concatenatedSignal").onInterface(INTERFACE_NAME).call([this](const std::string& concatenatedString){ this->onConcatenatedSignal(concatenatedString); });
     }
 
+    ~concatenator_proxy() = default;
+
     virtual void onConcatenatedSignal(const std::string& concatenatedString) = 0;
 
     virtual void onConcatenateReply(const std::string& result, const sdbus::Error* error) = 0;
@@ -33,11 +35,11 @@ protected:
 public:
     void concatenate(const std::map<std::string, sdbus::Variant>& params)
     {
-        object_.callMethodAsync("concatenate").onInterface(interfaceName).withArguments(params).uponReplyInvoke([this](const sdbus::Error* error, const std::string& result){ this->onConcatenateReply(result, error); });
+        proxy_.callMethodAsync("concatenate").onInterface(INTERFACE_NAME).withArguments(params).uponReplyInvoke([this](const sdbus::Error* error, const std::string& result){ this->onConcatenateReply(result, error); });
     }
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& proxy_;
 };
 
 }}} // namespaces

tests/stresstests/fahrenheit-thermometer-adaptor.h

@@ -18,15 +18,17 @@ namespace fahrenheit {
 class thermometer_adaptor
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.fahrenheit.thermometer";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.fahrenheit.thermometer";
 
 protected:
     thermometer_adaptor(sdbus::IObject& object)
         : object_(object)
     {
-        object_.registerMethod("getCurrentTemperature").onInterface(interfaceName).implementedAs([this](){ return this->getCurrentTemperature(); });
+        object_.registerMethod("getCurrentTemperature").onInterface(INTERFACE_NAME).implementedAs([this](){ return this->getCurrentTemperature(); });
     }
 
+    ~thermometer_adaptor() = default;
+
 private:
     virtual uint32_t getCurrentTemperature() = 0;
 
@@ -45,16 +47,18 @@ namespace thermometer {
 class factory_adaptor
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.fahrenheit.thermometer.factory";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.fahrenheit.thermometer.factory";
 
 protected:
     factory_adaptor(sdbus::IObject& object)
         : object_(object)
     {
-        object_.registerMethod("createDelegateObject").onInterface(interfaceName).implementedAs([this](sdbus::Result<sdbus::ObjectPath>&& result){ this->createDelegateObject(std::move(result)); });
-        object_.registerMethod("destroyDelegateObject").onInterface(interfaceName).implementedAs([this](sdbus::Result<>&& result, sdbus::ObjectPath delegate){ this->destroyDelegateObject(std::move(result), std::move(delegate)); }).withNoReply();
+        object_.registerMethod("createDelegateObject").onInterface(INTERFACE_NAME).implementedAs([this](sdbus::Result<sdbus::ObjectPath>&& result){ this->createDelegateObject(std::move(result)); });
+        object_.registerMethod("destroyDelegateObject").onInterface(INTERFACE_NAME).implementedAs([this](sdbus::Result<>&& result, sdbus::ObjectPath delegate){ this->destroyDelegateObject(std::move(result), std::move(delegate)); }).withNoReply();
     }
 
+    ~factory_adaptor() = default;
+
 private:
     virtual void createDelegateObject(sdbus::Result<sdbus::ObjectPath>&& result) = 0;
     virtual void destroyDelegateObject(sdbus::Result<>&& result, sdbus::ObjectPath delegate) = 0;

tests/stresstests/fahrenheit-thermometer-proxy.h

@@ -18,24 +18,26 @@ namespace fahrenheit {
 class thermometer_proxy
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.fahrenheit.thermometer";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.fahrenheit.thermometer";
 
 protected:
-    thermometer_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
+    thermometer_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
     {
     }
 
+    ~thermometer_proxy() = default;
+
 public:
     uint32_t getCurrentTemperature()
     {
         uint32_t result;
-        object_.callMethod("getCurrentTemperature").onInterface(interfaceName).storeResultsTo(result);
+        proxy_.callMethod("getCurrentTemperature").onInterface(INTERFACE_NAME).storeResultsTo(result);
         return result;
     }
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& proxy_;
 };
 
 }}}} // namespaces
@@ -49,29 +51,31 @@ namespace thermometer {
 class factory_proxy
 {
 public:
-    static constexpr const char* interfaceName = "org.sdbuscpp.stresstests.fahrenheit.thermometer.factory";
+    static constexpr const char* INTERFACE_NAME = "org.sdbuscpp.stresstests.fahrenheit.thermometer.factory";
 
 protected:
-    factory_proxy(sdbus::IObjectProxy& object)
-        : object_(object)
+    factory_proxy(sdbus::IProxy& proxy)
+        : proxy_(proxy)
     {
     }
 
+    ~factory_proxy() = default;
+
 public:
     sdbus::ObjectPath createDelegateObject()
     {
         sdbus::ObjectPath result;
-        object_.callMethod("createDelegateObject").onInterface(interfaceName).storeResultsTo(result);
+        proxy_.callMethod("createDelegateObject").onInterface(INTERFACE_NAME).storeResultsTo(result);
         return result;
     }
 
     void destroyDelegateObject(const sdbus::ObjectPath& delegate)
     {
-        object_.callMethod("destroyDelegateObject").onInterface(interfaceName).withArguments(delegate).dontExpectReply();
+        proxy_.callMethod("destroyDelegateObject").onInterface(INTERFACE_NAME).withArguments(delegate).dontExpectReply();
     }
 
 private:
-    sdbus::IObjectProxy& object_;
+    sdbus::IProxy& proxy_;
 };
 
 }}}}} // namespaces

tests/stresstests/sdbus-c++-stress-tests.cpp

@@ -0,0 +1,514 @@
+/**
+ * (C) 2019 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ *
+ * @file sdbus-c++-stress-tests.cpp
+ *
+ * Created on: Jan 25, 2019
+ * Project: sdbus-c++
+ * Description: High-level D-Bus IPC C++ library based on sd-bus
+ *
+ * This file is part of sdbus-c++.
+ *
+ * sdbus-c++ is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * sdbus-c++ is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with sdbus-c++. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "celsius-thermometer-adaptor.h"
+#include "celsius-thermometer-proxy.h"
+#include "fahrenheit-thermometer-adaptor.h"
+#include "fahrenheit-thermometer-proxy.h"
+#include "concatenator-adaptor.h"
+#include "concatenator-proxy.h"
+#include <sdbus-c++/sdbus-c++.h>
+#include <vector>
+#include <string>
+#include <iostream>
+#include <unistd.h>
+#include <thread>
+#include <chrono>
+#include <cassert>
+#include <cstdlib>
+#include <atomic>
+#include <sstream>
+#include <mutex>
+#include <condition_variable>
+#include <queue>
+
+using namespace std::chrono_literals;
+using namespace std::string_literals;
+
+#define SERVICE_1_BUS_NAME "org.sdbuscpp.stresstests.service1"s
+#define SERVICE_2_BUS_NAME "org.sdbuscpp.stresstests.service2"s
+#define CELSIUS_THERMOMETER_OBJECT_PATH "/org/sdbuscpp/stresstests/celsius/thermometer"s
+#define FAHRENHEIT_THERMOMETER_OBJECT_PATH "/org/sdbuscpp/stresstests/fahrenheit/thermometer"s
+#define CONCATENATOR_OBJECT_PATH "/org/sdbuscpp/stresstests/concatenator"s
+
+class CelsiusThermometerAdaptor : public sdbus::AdaptorInterfaces<org::sdbuscpp::stresstests::celsius::thermometer_adaptor>
+{
+public:
+    CelsiusThermometerAdaptor(sdbus::IConnection& connection, std::string objectPath)
+        : AdaptorInterfaces(connection, std::move(objectPath))
+    {
+        registerAdaptor();
+    }
+
+    ~CelsiusThermometerAdaptor()
+    {
+        unregisterAdaptor();
+    }
+
+protected:
+    virtual uint32_t getCurrentTemperature() override
+    {
+        return m_currentTemperature++;
+    }
+
+private:
+    uint32_t m_currentTemperature{};
+};
+
+class CelsiusThermometerProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::celsius::thermometer_proxy>
+{
+public:
+    CelsiusThermometerProxy(sdbus::IConnection& connection, std::string destination, std::string objectPath)
+        : ProxyInterfaces(connection, std::move(destination), std::move(objectPath))
+    {
+        registerProxy();
+    }
+
+    ~CelsiusThermometerProxy()
+    {
+        unregisterProxy();
+    }
+};
+
+class FahrenheitThermometerAdaptor : public sdbus::AdaptorInterfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_adaptor
+                                                                    , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_adaptor >
+{
+public:
+    FahrenheitThermometerAdaptor(sdbus::IConnection& connection, std::string objectPath, bool isDelegate)
+        : AdaptorInterfaces(connection, std::move(objectPath))
+        , celsiusProxy_(connection, SERVICE_2_BUS_NAME, CELSIUS_THERMOMETER_OBJECT_PATH)
+    {
+        if (!isDelegate)
+        {
+            unsigned int workers = std::thread::hardware_concurrency();
+            if (workers < 4)
+                workers = 4;
+
+            for (unsigned int i = 0; i < workers; ++i)
+                workers_.emplace_back([this]()
+                {
+                    //std::cout << "Created FTA worker thread 0x" << std::hex << std::this_thread::get_id() << std::dec << std::endl;
+
+                    while(!exit_)
+                    {
+                        // Pop a work item from the queue
+                        std::unique_lock<std::mutex> lock(mutex_);
+                        cond_.wait(lock, [this]{return !requests_.empty() || exit_;});
+                        if (exit_)
+                            break;
+                        auto request = std::move(requests_.front());
+                        requests_.pop();
+                        lock.unlock();
+
+                        // Either create or destroy a delegate object
+                        if (request.delegateObjectPath.empty())
+                        {
+                            // Create new delegate object
+                            auto& connection = getObject().getConnection();
+                            sdbus::ObjectPath newObjectPath = FAHRENHEIT_THERMOMETER_OBJECT_PATH + "/" + std::to_string(request.objectNr);
+
+                            // Here we are testing dynamic creation of a D-Bus object in an async way
+                            auto adaptor = std::make_unique<FahrenheitThermometerAdaptor>(connection, newObjectPath, true);
+
+                            std::unique_lock<std::mutex> lock{childrenMutex_};
+                            children_.emplace(newObjectPath, std::move(adaptor));
+                            lock.unlock();
+
+                            request.result.returnResults(newObjectPath);
+                        }
+                        else
+                        {
+                            // Destroy existing delegate object
+                            // Here we are testing dynamic removal of a D-Bus object in an async way
+                            std::lock_guard<std::mutex> lock{childrenMutex_};
+                            children_.erase(request.delegateObjectPath);
+                        }
+                    }
+                });
+        }
+
+        registerAdaptor();
+    }
+
+    ~FahrenheitThermometerAdaptor()
+    {
+        unregisterAdaptor();
+
+        exit_ = true;
+        cond_.notify_all();
+        for (auto& worker : workers_)
+            worker.join();
+    }
+
+protected:
+    virtual uint32_t getCurrentTemperature() override
+    {
+        // In this D-Bus call, make yet another D-Bus call to another service over the same connection
+        return static_cast<uint32_t>(celsiusProxy_.getCurrentTemperature() * 1.8 + 32.);
+    }
+
+    virtual void createDelegateObject(sdbus::Result<sdbus::ObjectPath>&& result) override
+    {
+        static size_t objectCounter{};
+        objectCounter++;
+
+        std::unique_lock<std::mutex> lock(mutex_);
+        requests_.push(WorkItem{objectCounter, std::string{}, std::move(result)});
+        lock.unlock();
+        cond_.notify_one();
+    }
+
+    virtual void destroyDelegateObject(sdbus::Result<>&& /*result*/, sdbus::ObjectPath delegate) override
+    {
+        std::unique_lock<std::mutex> lock(mutex_);
+        requests_.push(WorkItem{0, std::move(delegate), {}});
+        lock.unlock();
+        cond_.notify_one();
+    }
+
+private:
+    CelsiusThermometerProxy celsiusProxy_;
+    std::map<std::string, std::unique_ptr<FahrenheitThermometerAdaptor>> children_;
+    std::mutex childrenMutex_;
+
+    struct WorkItem
+    {
+        size_t objectNr;
+        sdbus::ObjectPath delegateObjectPath;
+        sdbus::Result<sdbus::ObjectPath> result;
+    };
+    std::mutex mutex_;
+    std::condition_variable cond_;
+    std::queue<WorkItem> requests_;
+    std::vector<std::thread> workers_;
+    std::atomic<bool> exit_{};
+};
+
+class FahrenheitThermometerProxy : public sdbus::ProxyInterfaces< org::sdbuscpp::stresstests::fahrenheit::thermometer_proxy
+                                                                , org::sdbuscpp::stresstests::fahrenheit::thermometer::factory_proxy >
+{
+public:
+    FahrenheitThermometerProxy(sdbus::IConnection& connection, std::string destination, std::string objectPath)
+        : ProxyInterfaces(connection, std::move(destination), std::move(objectPath))
+    {
+        registerProxy();
+    }
+
+    ~FahrenheitThermometerProxy()
+    {
+        unregisterProxy();
+    }
+};
+
+class ConcatenatorAdaptor : public sdbus::AdaptorInterfaces<org::sdbuscpp::stresstests::concatenator_adaptor>
+{
+public:
+    ConcatenatorAdaptor(sdbus::IConnection& connection, std::string objectPath)
+        : AdaptorInterfaces(connection, std::move(objectPath))
+    {
+        unsigned int workers = std::thread::hardware_concurrency();
+        if (workers < 4)
+            workers = 4;
+
+        for (unsigned int i = 0; i < workers; ++i)
+            workers_.emplace_back([this]()
+            {
+                //std::cout << "Created CA worker thread 0x" << std::hex << std::this_thread::get_id() << std::dec << std::endl;
+
+                while(!exit_)
+                {
+                    // Pop a work item from the queue
+                    std::unique_lock<std::mutex> lock(mutex_);
+                    cond_.wait(lock, [this]{return !requests_.empty() || exit_;});
+                    if (exit_)
+                        break;
+                    auto request = std::move(requests_.front());
+                    requests_.pop();
+                    lock.unlock();
+
+                    // Do concatenation work, return results and fire signal
+                    auto aString = request.input.at("key1").get<std::string>();
+                    auto aNumber = request.input.at("key2").get<uint32_t>();
+                    auto resultString = aString + " " + std::to_string(aNumber);
+
+                    request.result.returnResults(resultString);
+
+                    emitConcatenatedSignal(resultString);
+                }
+            });
+
+        registerAdaptor();
+    }
+
+    ~ConcatenatorAdaptor()
+    {
+        unregisterAdaptor();
+
+        exit_ = true;
+        cond_.notify_all();
+        for (auto& worker : workers_)
+            worker.join();
+    }
+
+protected:
+    virtual void concatenate(sdbus::Result<std::string>&& result, std::map<std::string, sdbus::Variant> params) override
+    {
+        std::unique_lock<std::mutex> lock(mutex_);
+        requests_.push(WorkItem{std::move(params), std::move(result)});
+        lock.unlock();
+        cond_.notify_one();
+    }
+
+private:
+    struct WorkItem
+    {
+        std::map<std::string, sdbus::Variant> input;
+        sdbus::Result<std::string> result;
+    };
+    std::mutex mutex_;
+    std::condition_variable cond_;
+    std::queue<WorkItem> requests_;
+    std::vector<std::thread> workers_;
+    std::atomic<bool> exit_{};
+};
+
+class ConcatenatorProxy : public sdbus::ProxyInterfaces<org::sdbuscpp::stresstests::concatenator_proxy>
+{
+public:
+    ConcatenatorProxy(sdbus::IConnection& connection, std::string destination, std::string objectPath)
+        : ProxyInterfaces(connection, std::move(destination), std::move(objectPath))
+    {
+        registerProxy();
+    }
+
+    ~ConcatenatorProxy()
+    {
+        unregisterProxy();
+    }
+
+private:
+    virtual void onConcatenateReply(const std::string& result, const sdbus::Error* error) override
+    {
+        assert(error == nullptr);
+
+        std::stringstream str(result);
+        std::string aString;
+        str >> aString;
+        assert(aString == "sdbus-c++-stress-tests");
+
+        uint32_t aNumber;
+        str >> aNumber;
+        assert(aNumber > 0);
+
+        ++repliesReceived_;
+    }
+
+    virtual void onConcatenatedSignal(const std::string& concatenatedString) override
+    {
+        std::stringstream str(concatenatedString);
+        std::string aString;
+        str >> aString;
+        assert(aString == "sdbus-c++-stress-tests");
+
+        uint32_t aNumber;
+        str >> aNumber;
+        assert(aNumber > 0);
+
+        ++signalsReceived_;
+    }
+
+public:
+    std::atomic<uint32_t> repliesReceived_{};
+    std::atomic<uint32_t> signalsReceived_{};
+};
+
+//-----------------------------------------
+int main(int argc, char *argv[])
+{
+    long loops;
+    long loopDuration;
+
+    if (argc == 1)
+    {
+        loops = 1;
+        loopDuration = 30000;
+    }
+    else if (argc == 3)
+    {
+        loops = std::atol(argv[1]);
+        loopDuration = std::atol(argv[2]);
+    }
+    else
+        throw std::runtime_error("Wrong program options");
+
+    std::cout << "Going on with " << loops << " loops and " << loopDuration << "ms loop duration" << std::endl;
+
+    std::atomic<uint32_t> concatenationCallsMade{0};
+    std::atomic<uint32_t> concatenationRepliesReceived{0};
+    std::atomic<uint32_t> concatenationSignalsReceived{0};
+    std::atomic<uint32_t> thermometerCallsMade{0};
+
+    std::atomic<bool> exitLogger{};
+    std::thread loggerThread([&]()
+    {
+        while (!exitLogger)
+        {
+            std::this_thread::sleep_for(1s);
+
+            std::cout << "Made " << concatenationCallsMade << " concatenation calls, received " << concatenationRepliesReceived << " replies and " << concatenationSignalsReceived << " signals so far." << std::endl;
+            std::cout << "Made " << thermometerCallsMade << " thermometer calls so far." << std::endl << std::endl;
+        }
+    });
+
+    for (long loop = 0; loop < loops; ++loop)
+    {
+        std::cout << "Entering loop " << loop+1 << std::endl;
+
+        auto service2Connection = sdbus::createSystemBusConnection(SERVICE_2_BUS_NAME);
+        std::atomic<bool> service2ThreadReady{};
+        std::thread service2Thread([&con = *service2Connection, &service2ThreadReady]()
+        {
+            CelsiusThermometerAdaptor thermometer(con, CELSIUS_THERMOMETER_OBJECT_PATH);
+            service2ThreadReady = true;
+            con.enterProcessingLoop();
+        });
+
+        auto service1Connection = sdbus::createSystemBusConnection(SERVICE_1_BUS_NAME);
+        std::atomic<bool> service1ThreadReady{};
+        std::thread service1Thread([&con = *service1Connection, &service1ThreadReady]()
+        {
+            ConcatenatorAdaptor concatenator(con, CONCATENATOR_OBJECT_PATH);
+            FahrenheitThermometerAdaptor thermometer(con, FAHRENHEIT_THERMOMETER_OBJECT_PATH, false);
+            service1ThreadReady = true;
+            con.enterProcessingLoop();
+        });
+
+        // Wait for both services to export their D-Bus objects
+        while (!service2ThreadReady || !service1ThreadReady)
+            std::this_thread::sleep_for(1ms);
+
+        auto clientConnection = sdbus::createSystemBusConnection();
+        std::mutex clientThreadExitMutex;
+        std::condition_variable clientThreadExitCond;
+        bool clientThreadExit{};
+        std::thread clientThread([&, &con = *clientConnection]()
+        {
+            std::atomic<bool> stopClients{false};
+
+            std::thread concatenatorThread([&]()
+            {
+                ConcatenatorProxy concatenator(con, SERVICE_1_BUS_NAME, CONCATENATOR_OBJECT_PATH);
+
+                uint32_t localCounter{};
+
+                // Issue async concatenate calls densely one after another
+                while (!stopClients)
+                {
+                    std::map<std::string, sdbus::Variant> param;
+                    param["key1"] = "sdbus-c++-stress-tests";
+                    param["key2"] = ++localCounter;
+
+                    concatenator.concatenate(param);
+
+                    if ((localCounter % 10) == 0)
+                    {
+                        // Make sure the system is catching up with our async requests,
+                        // otherwise sleep a bit to slow down flooding the server.
+                        assert(localCounter >= concatenator.repliesReceived_);
+                        while ((localCounter - concatenator.repliesReceived_) > 40 && !stopClients)
+                            std::this_thread::sleep_for(1ms);
+
+                        // Update statistics
+                        concatenationCallsMade = localCounter;
+                        concatenationRepliesReceived = (uint32_t)concatenator.repliesReceived_;
+                        concatenationSignalsReceived = (uint32_t)concatenator.signalsReceived_;
+                    }
+                }
+            });
+
+            std::thread thermometerThread([&]()
+            {
+                // Here we continuously remotely call getCurrentTemperature(). We have one proxy object,
+                // first we use it's factory interface to create another proxy object, call getCurrentTemperature()
+                // on that one, and then destroy that proxy object. All that continously in a loop.
+                // This tests dynamic creation and destruction of remote D-Bus objects and local object proxies.
+
+                FahrenheitThermometerProxy thermometer(con, SERVICE_1_BUS_NAME, FAHRENHEIT_THERMOMETER_OBJECT_PATH);
+                uint32_t localCounter{};
+                uint32_t previousTemperature{};
+
+                while (!stopClients)
+                {
+                    localCounter++;
+
+                    auto newObjectPath = thermometer.createDelegateObject();
+                    FahrenheitThermometerProxy proxy{con, SERVICE_1_BUS_NAME, newObjectPath};
+
+                    auto temperature = proxy.getCurrentTemperature();
+                    assert(temperature >= previousTemperature); // The temperature shall rise continually
+                    previousTemperature = temperature;
+                    //std::this_thread::sleep_for(1ms);
+
+                    if ((localCounter % 10) == 0)
+                        thermometerCallsMade = localCounter;
+
+                    thermometer.destroyDelegateObject(newObjectPath);
+                }
+            });
+
+            // We could run the loop in a sync way, but we want it to run also when proxies are destroyed for better
+            // coverage of multi-threaded scenarios, so we run it async and use condition variable for exit notification
+            //con.enterProcessingLoop();
+            con.enterProcessingLoopAsync();
+
+            std::unique_lock<std::mutex> lock(clientThreadExitMutex);
+            clientThreadExitCond.wait(lock, [&]{return clientThreadExit;});
+
+            stopClients = true;
+            thermometerThread.join();
+            concatenatorThread.join();
+        });
+
+        std::this_thread::sleep_for(std::chrono::milliseconds(loopDuration));
+
+        //clientConnection->leaveProcessingLoop();
+        std::unique_lock<std::mutex> lock(clientThreadExitMutex);
+        clientThreadExit = true;
+        lock.unlock();
+        clientThreadExitCond.notify_one();
+        clientThread.join();
+
+        service1Connection->leaveProcessingLoop();
+        service1Thread.join();
+
+        service2Connection->leaveProcessingLoop();
+        service2Thread.join();
+    }
+
+    exitLogger = true;
+    loggerThread.join();
+    
+    return 0;
+}

tests/unittests/Connection_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Connection_test.cpp
  * @author Ardazishvili Roman (ardazishvili.roman@yandex.ru)
@@ -145,4 +146,6 @@ TEST_P(AConnectionNameRequest, ThrowsOnFail)
     ASSERT_THROW(conn_.requestName(""), sdbus::Error);
 }
 
-INSTANTIATE_TEST_SUITE_P(Request, AConnectionNameRequest, ::testing::Values(BusType::eSystem, BusType::eSession));
+// INSTANTIATE_TEST_SUITE_P is defined in googletest master, but not in googletest v1.8.1 that we are using now
+INSTANTIATE_TEST_CASE_P(Request, AConnectionNameRequest, ::testing::Values(BusType::eSystem, BusType::eSession));
+//INSTANTIATE_TEST_SUITE_P(Request, AConnectionNameRequest, ::testing::Values(BusType::eSystem, BusType::eSession))

tests/unittests/Message_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Message_test.cpp
  *
@@ -30,12 +31,13 @@
 #include <cstdint>
 
 using ::testing::Eq;
+using ::testing::Gt;
 using ::testing::DoubleEq;
 using namespace std::string_literals;
 
 namespace
 {
-    std::string deserializeString(sdbus::Message& msg)
+    std::string deserializeString(sdbus::PlainMessage& msg)
     {
         std::string str;
         msg >> str;
@@ -49,29 +51,29 @@ namespace
 
 TEST(AMessage, CanBeDefaultConstructed)
 {
-    ASSERT_NO_THROW(sdbus::Message());
+    ASSERT_NO_THROW(sdbus::PlainMessage());
 }
 
 TEST(AMessage, IsInvalidAfterDefaultConstructed)
 {
-    sdbus::Message msg;
+    sdbus::PlainMessage msg;
 
     ASSERT_FALSE(msg.isValid());
 }
 
 TEST(AMessage, IsValidWhenConstructedAsRealMessage)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
     ASSERT_TRUE(msg.isValid());
 }
 
 TEST(AMessage, CreatesShallowCopyWhenCopyConstructed)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
     msg << "I am a string"s;
     msg.seal();
 
-    sdbus::Message msgCopy = msg;
+    sdbus::PlainMessage msgCopy = msg;
 
     std::string str;
     msgCopy >> str;
@@ -82,11 +84,11 @@ TEST(AMessage, CreatesShallowCopyWhenCopyConstructed)
 
 TEST(AMessage, CreatesDeepCopyWhenEplicitlyCopied)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
     msg << "I am a string"s;
     msg.seal();
 
-    sdbus::Message msgCopy{sdbus::createPlainMessage()};
+    auto msgCopy = sdbus::createPlainMessage();
     msg.copyTo(msgCopy, true);
     msgCopy.seal(); // Seal to be able to read from it subsequently
     msg.rewind(true); // Rewind to the beginning after copying
@@ -97,14 +99,14 @@ TEST(AMessage, CreatesDeepCopyWhenEplicitlyCopied)
 
 TEST(AMessage, IsEmptyWhenContainsNoValue)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     ASSERT_TRUE(msg.isEmpty());
 }
 
 TEST(AMessage, IsNotEmptyWhenContainsAValue)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
     msg << "I am a string"s;
 
     ASSERT_FALSE(msg.isEmpty());
@@ -112,7 +114,7 @@ TEST(AMessage, IsNotEmptyWhenContainsAValue)
 
 TEST(AMessage, CanCarryASimpleInteger)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     int dataWritten = 5;
 
@@ -125,9 +127,24 @@ TEST(AMessage, CanCarryASimpleInteger)
     ASSERT_THAT(dataRead, Eq(dataWritten));
 }
 
+TEST(AMessage, CanCarryAUnixFd)
+{
+    auto msg = sdbus::createPlainMessage();
+
+    sdbus::UnixFd dataWritten{0};
+    msg << dataWritten;
+
+    msg.seal();
+
+    sdbus::UnixFd dataRead;
+    msg >> dataRead;
+
+    ASSERT_THAT(dataRead.get(), Gt(dataWritten.get()));
+}
+
 TEST(AMessage, CanCarryAVariant)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     auto dataWritten = sdbus::Variant((double)3.14);
 
@@ -142,7 +159,7 @@ TEST(AMessage, CanCarryAVariant)
 
 TEST(AMessage, CanCarryACollectionOfEmbeddedVariants)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     auto value = std::vector<sdbus::Variant>{"hello"s, (double)3.14};
     auto dataWritten = sdbus::Variant{value};
@@ -159,7 +176,7 @@ TEST(AMessage, CanCarryACollectionOfEmbeddedVariants)
 
 TEST(AMessage, CanCarryAnArray)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     std::vector<int64_t> dataWritten{3545342, 43643532, 324325};
 
@@ -174,7 +191,7 @@ TEST(AMessage, CanCarryAnArray)
 
 TEST(AMessage, CanCarryADictionary)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     std::map<int, std::string> dataWritten{{1, "one"}, {2, "two"}};
 
@@ -189,7 +206,7 @@ TEST(AMessage, CanCarryADictionary)
 
 TEST(AMessage, CanCarryAComplexType)
 {
-    sdbus::Message msg{sdbus::createPlainMessage()};
+    auto msg = sdbus::createPlainMessage();
 
     using ComplexType = std::map<
                             uint64_t,

tests/unittests/TypeTraits_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file TypeTraits_test.cpp
  *
@@ -72,6 +73,7 @@ namespace
     TYPE(sdbus::ObjectPath)HAS_DBUS_TYPE_SIGNATURE("o")
     TYPE(sdbus::Signature)HAS_DBUS_TYPE_SIGNATURE("g")
     TYPE(sdbus::Variant)HAS_DBUS_TYPE_SIGNATURE("v")
+    TYPE(sdbus::UnixFd)HAS_DBUS_TYPE_SIGNATURE("h")
     TYPE(sdbus::Struct<bool>)HAS_DBUS_TYPE_SIGNATURE("(b)")
     TYPE(sdbus::Struct<uint16_t, double, std::string, sdbus::Variant>)HAS_DBUS_TYPE_SIGNATURE("(qdsv)")
     TYPE(std::vector<int16_t>)HAS_DBUS_TYPE_SIGNATURE("an")
@@ -91,10 +93,11 @@ namespace
                                     >
                                 >,
                                 sdbus::Signature,
+                                sdbus::UnixFd,
                                 const char*
                             >
                         >;
-    TYPE(ComplexType)HAS_DBUS_TYPE_SIGNATURE("a{t(a{ya(obva{is})}gs)}")
+    TYPE(ComplexType)HAS_DBUS_TYPE_SIGNATURE("a{t(a{ya(obva{is})}ghs)}")
 
     typedef ::testing::Types< bool
                             , uint8_t
@@ -110,6 +113,7 @@ namespace
                             , sdbus::ObjectPath
                             , sdbus::Signature
                             , sdbus::Variant
+                            , sdbus::UnixFd
                             , sdbus::Struct<bool>
                             , sdbus::Struct<uint16_t, double, std::string, sdbus::Variant>
                             , std::vector<int16_t>

tests/unittests/Types_test.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file Types_test.cpp
  *
@@ -28,8 +29,10 @@
 #include <gtest/gtest.h>
 #include <gmock/gmock.h>
 #include <cstdint>
+#include <sys/eventfd.h>
 
 using ::testing::Eq;
+using ::testing::Gt;
 using namespace std::string_literals;
 
 namespace
@@ -152,7 +155,7 @@ TEST(ANonEmptyVariant, SerializesSuccessfullyToAMessage)
 {
     sdbus::Variant variant("a string");
 
-    sdbus::Message msg = sdbus::createPlainMessage();
+    auto msg = sdbus::createPlainMessage();
 
     ASSERT_NO_THROW(variant.serializeTo(msg));
 }
@@ -161,7 +164,7 @@ TEST(AnEmptyVariant, ThrowsWhenBeingSerializedToAMessage)
 {
     sdbus::Variant variant;
 
-    sdbus::Message msg = sdbus::createPlainMessage();
+    auto msg = sdbus::createPlainMessage();
 
     ASSERT_THROW(variant.serializeTo(msg), sdbus::Error);
 }
@@ -172,7 +175,7 @@ TEST(ANonEmptyVariant, SerializesToAndDeserializesFromAMessageSuccessfully)
     ComplexType value{ {ANY_UINT64, ComplexType::mapped_type{sdbus::make_struct("hello", ANY_DOUBLE), sdbus::make_struct("world", ANY_DOUBLE)}} };
     sdbus::Variant variant(value);
 
-    sdbus::Message msg = sdbus::createPlainMessage();
+    auto msg = sdbus::createPlainMessage();
     variant.serializeTo(msg);
     msg.seal();
     sdbus::Variant variant2;
@@ -189,7 +192,7 @@ TEST(CopiesOfVariant, SerializeToAndDeserializeFromMessageSuccessfully)
     auto variantCopy1{variant};
     auto variantCopy2 = variant;
 
-    sdbus::Message msg = sdbus::createPlainMessage();
+    auto msg = sdbus::createPlainMessage();
     variant.serializeTo(msg);
     variantCopy1.serializeTo(msg);
     variantCopy2.serializeTo(msg);
@@ -240,3 +243,104 @@ TEST(ASignature, CanBeConstructedFromStdString)
 
     ASSERT_THAT(sdbus::Signature{aSignature}, Eq(aSignature));
 }
+
+TEST(AUnixFd, DuplicatesAndOwnsFdUponStandardConstruction)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+
+    EXPECT_THAT(sdbus::UnixFd{fd}.get(), Gt(fd));
+    EXPECT_THAT(::close(fd), Eq(0));
+}
+
+TEST(AUnixFd, AdoptsAndOwnsFdAsIsUponAdoptionConstruction)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+
+    EXPECT_THAT(sdbus::UnixFd(fd, sdbus::adopt_fd).get(), Eq(fd));
+    EXPECT_THAT(::close(fd), Eq(-1));
+}
+
+TEST(AUnixFd, DuplicatesFdUponCopyConstruction)
+{
+    sdbus::UnixFd unixFd(::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK));
+
+    sdbus::UnixFd unixFdCopy{unixFd};
+
+    EXPECT_THAT(unixFdCopy.get(), Gt(unixFd.get()));
+}
+
+TEST(AUnixFd, TakesOverFdUponMoveConstruction)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+    sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+
+    sdbus::UnixFd unixFdNew{std::move(unixFd)};
+
+    EXPECT_FALSE(unixFd.isValid());
+    EXPECT_THAT(unixFdNew.get(), Eq(fd));
+}
+
+TEST(AUnixFd, ClosesFdProperlyUponDestruction)
+{
+    int fd, fdCopy;
+    {
+        fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+        sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+        auto unixFdNew = std::move(unixFd);
+        auto unixFdCopy = unixFdNew;
+        fdCopy = unixFdCopy.get();
+    }
+
+    EXPECT_THAT(::close(fd), Eq(-1));
+    EXPECT_THAT(::close(fdCopy), Eq(-1));
+}
+
+TEST(AUnixFd, DoesNotCloseReleasedFd)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+    int fdReleased;
+    {
+        sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+        fdReleased = unixFd.release();
+        EXPECT_FALSE(unixFd.isValid());
+    }
+
+    EXPECT_THAT(fd, Eq(fdReleased));
+    EXPECT_THAT(::close(fd), Eq(0));
+}
+
+TEST(AUnixFd, ClosesFdOnReset)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+    sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+
+    unixFd.reset();
+
+    EXPECT_FALSE(unixFd.isValid());
+    EXPECT_THAT(::close(fd), Eq(-1));
+}
+
+TEST(AUnixFd, DuplicatesNewFdAndClosesOriginalFdOnReset)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+    sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+    auto newFd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+
+    unixFd.reset(newFd);
+
+    EXPECT_THAT(unixFd.get(), Gt(newFd));
+    EXPECT_THAT(::close(fd), Eq(-1));
+    EXPECT_THAT(::close(newFd), Eq(0));
+}
+
+TEST(AUnixFd, TakesOverNewFdAndClosesOriginalFdOnAdoptingReset)
+{
+    auto fd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+    sdbus::UnixFd unixFd(fd, sdbus::adopt_fd);
+    auto newFd = ::eventfd(0, EFD_SEMAPHORE | EFD_NONBLOCK);
+
+    unixFd.reset(newFd, sdbus::adopt_fd);
+
+    EXPECT_THAT(unixFd.get(), Eq(newFd));
+    EXPECT_THAT(::close(fd), Eq(-1));
+}

tests/unittests/mocks/SdBusMock.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file SdBusMock.h
  * @author Ardazishvili Roman (ardazishvili.roman@yandex.ru)
@@ -46,11 +47,18 @@ public:
     MOCK_METHOD2(sd_bus_message_new_method_return, int(sd_bus_message *call, sd_bus_message **m));
     MOCK_METHOD3(sd_bus_message_new_method_error, int(sd_bus_message *call, sd_bus_message **m, const sd_bus_error *e));
 
+    MOCK_METHOD4(sd_bus_emit_properties_changed_strv, int(sd_bus *bus, const char *path, const char *interface, char **names));
+    MOCK_METHOD2(sd_bus_emit_object_added, int(sd_bus *bus, const char *path));
+    MOCK_METHOD2(sd_bus_emit_object_removed, int(sd_bus *bus, const char *path));
+    MOCK_METHOD3(sd_bus_emit_interfaces_added_strv, int(sd_bus *bus, const char *path, char **interfaces));
+    MOCK_METHOD3(sd_bus_emit_interfaces_removed_strv, int(sd_bus *bus, const char *path, char **interfaces));
+
     MOCK_METHOD1(sd_bus_open_user, int(sd_bus **ret));
     MOCK_METHOD1(sd_bus_open_system, int(sd_bus **ret));
     MOCK_METHOD3(sd_bus_request_name, int(sd_bus *bus, const char *name, uint64_t flags));
     MOCK_METHOD2(sd_bus_release_name, int(sd_bus *bus, const char *name));
     MOCK_METHOD6(sd_bus_add_object_vtable, int(sd_bus *bus, sd_bus_slot **slot, const char *path, const char *interface, const sd_bus_vtable *vtable, void *userdata));
+    MOCK_METHOD3(sd_bus_add_object_manager, int(sd_bus *bus, sd_bus_slot **slot, const char *path));
     MOCK_METHOD5(sd_bus_add_match, int(sd_bus *bus, sd_bus_slot **slot, const char *match, sd_bus_message_handler_t callback, void *userdata));
     MOCK_METHOD1(sd_bus_slot_unref, sd_bus_slot*(sd_bus_slot *slot));
 

tests/unittests/sdbus-c++-unit-tests.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file sdbus-c++-unit-tests.cpp
  *

tools/CMakeLists.txt

@@ -4,7 +4,7 @@
 
 cmake_minimum_required(VERSION 3.5)
 
-project(sdbus-c++-xml2cpp)
+project(sdbus-c++-tools)
 
 include(GNUInstallDirs)
 
@@ -19,17 +19,17 @@ find_package(EXPAT REQUIRED)
 #-------------------------------
 
 set(SDBUSCPP_XML2CPP_SRCS
-    xml2cpp.cpp
-    xml.h
-    xml.cpp
-    generator_utils.h
-    generator_utils.cpp
-    BaseGenerator.h
-    BaseGenerator.cpp
-    AdaptorGenerator.h
-    AdaptorGenerator.cpp
-    ProxyGenerator.h
-    ProxyGenerator.cpp)
+    xml2cpp-codegen/xml2cpp.cpp
+    xml2cpp-codegen/xml.h
+    xml2cpp-codegen/xml.cpp
+    xml2cpp-codegen/generator_utils.h
+    xml2cpp-codegen/generator_utils.cpp
+    xml2cpp-codegen/BaseGenerator.h
+    xml2cpp-codegen/BaseGenerator.cpp
+    xml2cpp-codegen/AdaptorGenerator.h
+    xml2cpp-codegen/AdaptorGenerator.cpp
+    xml2cpp-codegen/ProxyGenerator.h
+    xml2cpp-codegen/ProxyGenerator.cpp)
 
 #-------------------------------
 # GENERAL COMPILER CONFIGURATION
@@ -41,12 +41,11 @@ set(CMAKE_CXX_STANDARD 14)
 # EXECUTABLE BUILD INFORMATION
 #----------------------------------
 
-add_executable(${PROJECT_NAME} ${SDBUSCPP_XML2CPP_SRCS})
-
-target_link_libraries (${PROJECT_NAME} ${EXPAT_LIBRARIES})
+add_executable(sdbus-c++-xml2cpp ${SDBUSCPP_XML2CPP_SRCS})
+target_link_libraries (sdbus-c++-xml2cpp ${EXPAT_LIBRARIES})
 
 #----------------------------------
 # INSTALLATION
 #----------------------------------
 
-install(TARGETS ${PROJECT_NAME} EXPORT ${PROJECT_NAME} DESTINATION ${CMAKE_INSTALL_BINDIR})
+install(TARGETS sdbus-c++-xml2cpp EXPORT sdbus-c++-xml2cpp DESTINATION ${CMAKE_INSTALL_BINDIR})

tools/COPYING

@@ -0,0 +1,504 @@
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random
+  Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

tools/xml2cpp-codegen/AdaptorGenerator.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file AdaptorGenerator.cpp
  *
@@ -33,6 +34,7 @@
 #include <cstdlib>
 #include <algorithm>
 #include <iterator>
+#include <cctype>
 
 using std::endl;
 
@@ -80,7 +82,7 @@ std::string AdaptorGenerator::processInterface(Node& interface) const
     body << "class " << className << endl
             << "{" << endl
             << "public:" << endl
-            << tab << "static constexpr const char* interfaceName = \"" << ifaceName << "\";" << endl << endl
+            << tab << "static constexpr const char* INTERFACE_NAME = \"" << ifaceName << "\";" << endl << endl
             << "protected:" << endl
             << tab << className << "(sdbus::IObject& object)" << endl
             << tab << tab << ": object_(object)" << endl;
@@ -109,7 +111,7 @@ std::string AdaptorGenerator::processInterface(Node& interface) const
     if(!annotationRegistration.empty())
     {
         std::stringstream str;
-        str << tab << tab << "object_.setInterfaceFlags(interfaceName)" << annotationRegistration << ";" << endl;
+        str << tab << tab << "object_.setInterfaceFlags(INTERFACE_NAME)" << annotationRegistration << ";" << endl;
         annotationRegistration = str.str();
     }
 
@@ -129,6 +131,8 @@ std::string AdaptorGenerator::processInterface(Node& interface) const
                        << propertyRegistration
          << tab << "}" << endl << endl;
 
+    body << tab << "~" << className << "() = default;" << endl << endl;
+
     if (!signalMethods.empty())
     {
         body << "public:" << endl << signalMethods;
@@ -202,12 +206,12 @@ std::tuple<std::string, std::string> AdaptorGenerator::processMethods(const Node
 
         std::string argStr, argTypeStr;
         std::tie(argStr, argTypeStr, std::ignore) = argsToNamesAndTypes(inArgs, async);
-        
+
         using namespace std::string_literals;
 
         registrationSS << tab << tab << "object_.registerMethod(\""
                 << methodName << "\")"
-                << ".onInterface(interfaceName)"
+                << ".onInterface(INTERFACE_NAME)"
                 << ".implementedAs("
                 << "[this]("
                 << (async ? "sdbus::Result<" + outArgsToType(outArgs, true) + ">&& result" + (argTypeStr.empty() ? "" : ", ") : "")
@@ -260,7 +264,7 @@ std::tuple<std::string, std::string> AdaptorGenerator::processSignals(const Node
 
         signalRegistrationSS << tab << tab
                 << "object_.registerSignal(\"" << name << "\")"
-                        ".onInterface(interfaceName)";
+                        ".onInterface(INTERFACE_NAME)";
 
         if (args.size() > 0)
         {
@@ -270,10 +274,13 @@ std::tuple<std::string, std::string> AdaptorGenerator::processSignals(const Node
         signalRegistrationSS << annotationRegistration;
         signalRegistrationSS << ";" << endl;
 
-        signalMethodSS << tab << "void " << name << "(" << argTypeStr << ")" << endl
+        auto nameWithCapFirstLetter = name;
+        nameWithCapFirstLetter[0] = std::toupper(nameWithCapFirstLetter[0]);
+
+        signalMethodSS << tab << "void emit" << nameWithCapFirstLetter << "(" << argTypeStr << ")" << endl
                 << tab << "{" << endl
                 << tab << tab << "object_.emitSignal(\"" << name << "\")"
-                        ".onInterface(interfaceName)";
+                        ".onInterface(INTERFACE_NAME)";
 
         if (!argStr.empty())
         {
@@ -322,7 +329,7 @@ std::tuple<std::string, std::string> AdaptorGenerator::processProperties(const N
 
         registrationSS << tab << tab << "object_.registerProperty(\""
                 << propertyName << "\")"
-                << ".onInterface(interfaceName)";
+                << ".onInterface(INTERFACE_NAME)";
 
         if (propertyAccess == "read" || propertyAccess == "readwrite")
         {

tools/xml2cpp-codegen/AdaptorGenerator.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file AdaptorGenerator.h
  *

tools/xml2cpp-codegen/BaseGenerator.cpp

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file BaseGenerator.cpp
  *

tools/xml2cpp-codegen/BaseGenerator.h

@@ -1,5 +1,6 @@
 /**
- * (C) 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2017 KISTLER INSTRUMENTE AG, Winterthur, Switzerland
+ * (C) 2016 - 2019 Stanislav Angelovic <angelovic.s@gmail.com>
  *
  * @file BaseGenerator.h
  *