mirror of
https://github.com/Links2004/arduinoWebSockets.git
synced 2025-07-12 15:06:30 +02:00
d9a5c629f0
Add support for the onboard WiFi chip on the Raspberry Pi Pico W (RP2040 based ) board using the arduino-pico Arduino core at https://github.com/earlephilhower/arduino-pico The PicoW WiFi stack is a mashup of the ESP8266 and ESP32 cores, so only minimal changes were required. Defines a new NETWORK_TYPE for the PicoW. ESP8266 examples renames to ESP8266_PICO because they all work unmodified (except for OTA which is handled differently on the Pico)
803 B
803 B
Minimal example of WebsocketClientOTA and Python server
Take this as small example, how achieve OTA update on ESP8266 and ESP32.
Python server was wrote from train so take it only as bare example. It's working, but it's not mean to run in production.
Usage:
Start server:
cd python_ota_server
python3 -m venv .venv
source .venv/bin/activate
pip3 install -r requirements.txt
python3 main.py
Flash ESP with example sketch and start it.
Change version inside example sketch to higher and compile it and save it to bin file.
Rename it to mydevice-1.0.1-esp8266.bin and place it inside new folder firmware (server create it).
When the ESP connect to server, it check if version flashed is equal to fw in firmware folder. If higher FW version is present, start the flash process.