Add support for 160MHz rated CPUs (#3135)

Some ESP32 chips are rated only to 160MHz. This change adds support for them and does not allow frequency to be switched to 240MHz

.github/ISSUE_TEMPLATE/bug_report.md

@@ -24,7 +24,7 @@ https://github.com/me-no-dev/EspExceptionDecoder
 
 ### Hardware:
 Board:							?ESP32 Dev Module? ?node32? ?ttgo_lora?
-Core Installation version:			?1.0.0? ?1.0.1-rc4? ?1.0.1? ?1.0.1-git?
+Core Installation version:			?1.0.0? ?1.0.1-rc4? ?1.0.1? ?1.0.1-git? ?1.0.2? ?1.0.3?
 IDE name:						?Arduino IDE? ?Platform.io? ?IDF component?
 Flash Frequency:					?40Mhz?
 PSRAM enabled:                                    ?no? ?yes?

.github/stale.yml

@@ -0,0 +1,64 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 60
+
+# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
+# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+daysUntilClose: 14
+
+# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
+onlyLabels: []
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - pinned
+  - security
+  - "to be implemented"
+  - "for reference"
+  - "move to PR"
+  - "enhancement"
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: false
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: false
+
+# Set to true to ignore issues with an assignee (defaults to false)
+exemptAssignees: false
+
+# Label to use when marking as stale
+staleLabel: stale
+
+# Comment to post when marking as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed in 14 days if no further activity occurs. Thank you
+  for your contributions.
+
+# Comment to post when removing the stale label.
+# unmarkComment: >
+#   Your comment here.
+
+# Comment to post when closing a stale Issue or Pull Request.
+closeComment: >
+  This stale issue has been automatically closed. Thank you for your contributions.
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30
+
+# Limit to only `issues` or `pulls`
+only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed

.github/workflows/main.yml

@@ -0,0 +1,376 @@
+name: ESP32 Arduino CI
+
+on:
+  push:
+    branches:
+    - master
+    - release/*
+  pull_request:
+
+jobs:
+
+  build-arduino-0:
+    name: Build Arduino IDE Tests 0
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Run CMake Check
+      run: ./tools/ci/check-cmakelists.sh
+
+    - name: Install Arduino IDE
+      env:
+        #ESP32_GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 0 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-1:
+    name: Build Arduino IDE Tests 1
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 1 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-2:
+    name: Build Arduino IDE Tests 2
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 2 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-3:
+    name: Build Arduino IDE Tests 3
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 3 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-4:
+    name: Build Arduino IDE Tests 4
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 4 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-5:
+    name: Build Arduino IDE Tests 5
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 5 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-6:
+    name: Build Arduino IDE Tests 6
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 6 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-7:
+    name: Build Arduino IDE Tests 7
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 7 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-8:
+    name: Build Arduino IDE Tests 8
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 8 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-9:
+    name: Build Arduino IDE Tests 9
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 9 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-10:
+    name: Build Arduino IDE Tests 10
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 10 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-11:
+    name: Build Arduino IDE Tests 11
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 11 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-12:
+    name: Build Arduino IDE Tests 12
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 12 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-13:
+    name: Build Arduino IDE Tests 13
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 13 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-14:
+    name: Build Arduino IDE Tests 14
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 14 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-15:
+    name: Build Arduino IDE Tests 15
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 15 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-16:
+    name: Build Arduino IDE Tests 16
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 16 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+  build-arduino-17:
+    name: Build Arduino IDE Tests 17
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-arduino-ide.sh
+    - name: Test Arduino IDE
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/test-arduino-ide.sh 17 18
+    - name: Sketch Sizes
+      run: cat size.log
+
+
+  build-platformio:
+    name: Build PlatformIO Tests
+    runs-on: ubuntu-latest
+    
+    steps:
+    - uses: actions/checkout@v1
+    - name: Pull submodules
+      run: git submodule update --init --recursive
+    - name: Install Python Wheel
+      run: pip install wheel
+    - name: Install GCC Toolchain
+      run: cd tools && python get.py
+    - name: Install PlatformIO
+      env:
+        TRAVIS_BUILD_DIR: ${{ github.workspace }}
+      run: ./tools/ci/prep-platformio.sh
+    - name: Test PlatformIO
+      run: ./tools/ci/test-platformio.sh

.gitignore

@@ -5,3 +5,10 @@ tools/esptool.exe
 tools/mkspiffs/mkspiffs
 tools/mkspiffs/mkspiffs.exe
 .DS_Store
+ 
+#Ignore files built by Visual Studio/Visual Micro
+[Dd]ebug*/
+[Rr]elease*/
+.vs/
+__vm/
+*.vcxproj*

.travis.yml

@@ -1,8 +1,6 @@
 sudo: false
 
 language: python
-python:
-  - "2.7"
 
 os:
   - linux
@@ -10,22 +8,55 @@ os:
 git:
   depth: false
 
-env:
-    global:
+before_install:
+  - git submodule update --init --recursive
+
+stages:
+  - build
+  - deploy
+
+jobs:
+  include:
+
+    - name: "Build Arduino 0"
+      if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
+      stage: build
+      script: $TRAVIS_BUILD_DIR/tools/ci/build-tests.sh 0 4
+
+    - name: "Build Arduino 1"
+      if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
+      stage: build
+      script: $TRAVIS_BUILD_DIR/tools/ci/build-tests.sh 1 4
+
+    - name: "Build Arduino 2"
+      if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
+      stage: build
+      script: $TRAVIS_BUILD_DIR/tools/ci/build-tests.sh 2 4
+
+    - name: "Build Arduino 3"
+      if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
+      stage: build
+      script: $TRAVIS_BUILD_DIR/tools/ci/build-tests.sh 3 4
+
+    - name: "Build PlatformIO"
+      if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
+      stage: build
+      script: $TRAVIS_BUILD_DIR/tools/ci/build-tests.sh 4 4
+
+    - name: "Package & Deploy"
+      if: tag IS present
+      stage: deploy
+      env:
         - secure: "l/4Dt+KQ/mACtGAHDUsPr66fUte840PZoQ4xpPikqWZI0uARu4l+Ym7+sHinnT6fBqrj8AJeBYGz4nFa8NK4LutZn9mSD40w+sxl0wSV4oHV8rzKe3Cd8+sMG3+o33yWoikMNjSvqa73Q0rm+SgrlInNdZbuAyixL+a2alaWSnGPm4F2xwUGj+S33TOy5P/Xp77CYtCV5S8vzyk/eEdNhoF0GYePJVdfuzCOUjXMyT5OWxORkzzQ7Hnn/Ka/RDfV8Si4HgujLQBrK5q6iPnNBFqBSqilYBepSMn4opnOBpIm0SCgePz7XQEFC83buA7GUcnCnfg38bf+dCwHaODf1d1PmqVRYt2QmfinexXtM4afAtL0iBUDtvrfnXHzwW9w82VeZhpbJSVh9DUQvB0IlsZeCz9J9PUBAi3N+SMX+9l+BomYwRUlPuKY+Ef2JKk9q6mxtUkky5R0daAlVxEhpVdQks1rT+T+NMoDMemxQ3SKEiqAHh6EgHecruszffmZ71uLX9MpERpew0qN+UFiafws+jkTjx+3yF9yut0Hf9sMbeAYzzkGzRqJTUEBJ6B29Cql8M0yRXCNN/8wuuTHhG8esstozga4ZQoIVrq7mEAgup376PTcNfr1+imbbWVQ7lJdYIuDe6OS5V3OX6np11vgK/DbhfyzvQv9Z1zAGnM="
         - REMOTE_URL=https://github.com/$TRAVIS_REPO_SLUG/releases/download/$TRAVIS_TAG
-    
-script:
-  - bash $TRAVIS_BUILD_DIR/tools/build.sh
-
-deploy:
-  provider: script
-  skip_cleanup: true
-  script: bash $TRAVIS_BUILD_DIR/tools/deploy.sh -t$TRAVIS_TAG -a$ESP32_GITHUB_TOKEN -s$TRAVIS_REPO_SLUG -drelease
-
-  on:
-    tags: true
-
+      script: bash $TRAVIS_BUILD_DIR/tools/ci/build-release.sh -a$ESP32_GITHUB_TOKEN
+      before_deploy: git submodule update --init
+      deploy:
+      - provider: script
+        skip_cleanup: true
+        script: bash $TRAVIS_BUILD_DIR/tools/ci/deploy-release.sh -t$TRAVIS_TAG -a$ESP32_GITHUB_TOKEN -s$TRAVIS_REPO_SLUG -drelease
+        on:
+          tags: true
 
 notifications:
   email:

CMakeLists.txt

@@ -209,3 +209,8 @@ set(COMPONENT_REQUIRES spi_flash mbedtls mdns ethernet)
 set(COMPONENT_PRIV_REQUIRES fatfs nvs_flash app_update spiffs bootloader_support openssl bt)
 
 register_component()
+
+set_source_files_properties(libraries/AzureIoT/src/az_iot/iothub_client/src/iothubtransport_mqtt_common.c
+    PROPERTIES COMPILE_FLAGS
+    -Wno-maybe-uninitialized
+)

Kconfig.projbuild

@@ -232,6 +232,12 @@ config ARDUINO_SELECTIVE_ESPmDNS
     select ARDUINO_SELECTIVE_WiFi
     default y
 
+config ARDUINO_SELECTIVE_FFat
+    bool "Enable FFat"
+    depends on ARDUINO_SELECTIVE_COMPILATION
+    select ARDUINO_SELECTIVE_FS
+    default y
+
 config ARDUINO_SELECTIVE_FS
     bool "Enable FS"
     depends on ARDUINO_SELECTIVE_COMPILATION

README.md

@@ -14,7 +14,7 @@
 
 [Latest development release ![Development Version](https://img.shields.io/github/release/espressif/arduino-esp32/all.svg?style=plastic) ![Development Date](https://img.shields.io/github/release-date-pre/espressif/arduino-esp32.svg?style=plastic)](https://github.com/espressif/arduino-esp32/releases/latest/) ![Downloads](https://img.shields.io/github/downloads-pre/espressif/arduino-esp32/latest/total.svg?style=plastic)
 
-Most of the framework is implemented. Most noticable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:
+Most of the framework is implemented. Most noticeable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:
 - 16 channels [LEDC](cores/esp32/esp32-hal-ledc.h) which is PWM
 - 8 channels [SigmaDelta](cores/esp32/esp32-hal-sigmadelta.h) which uses SigmaDelta modulation
 - 2 channels [DAC](cores/esp32/esp32-hal-dac.h) which gives real analog output

boards.txt

@@ -44,6 +44,8 @@ esp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIF
 esp32.menu.PartitionScheme.default.build.partitions=default
 esp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
 esp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+esp32.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
+esp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
 esp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
 esp32.menu.PartitionScheme.minimal.build.partitions=minimal
 esp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
@@ -104,6 +106,9 @@ esp32.menu.FlashFreq.40.build.flash_freq=40m
 
 esp32.menu.FlashSize.4M=4MB (32Mb)
 esp32.menu.FlashSize.4M.build.flash_size=4MB
+esp32.menu.FlashSize.8M=8MB (64Mb)
+esp32.menu.FlashSize.8M.build.flash_size=8MB
+esp32.menu.FlashSize.8M.build.partitions=default_8MB
 esp32.menu.FlashSize.2M=2MB (16Mb)
 esp32.menu.FlashSize.2M.build.flash_size=2MB
 esp32.menu.FlashSize.2M.build.partitions=minimal
@@ -225,7 +230,6 @@ esp32wrover.menu.DebugLevel.verbose=Verbose
 esp32wrover.menu.DebugLevel.verbose.build.code_debug=5
 
 ##############################################################
-
 pico32.name=ESP32 Pico Kit
 
 pico32.upload.tool=esptool_py
@@ -279,6 +283,110 @@ pico32.menu.DebugLevel.verbose.build.code_debug=5
 
 ##############################################################
 
+tinypico.name=TinyPICO
+
+tinypico.upload.tool=esptool_py
+tinypico.upload.maximum_size=1310720
+tinypico.upload.maximum_data_size=327680
+tinypico.upload.wait_for_upload_port=true
+
+tinypico.serial.disableDTR=true
+tinypico.serial.disableRTS=true
+
+tinypico.build.mcu=esp32
+tinypico.build.core=esp32
+tinypico.build.variant=pico32
+tinypico.build.board=ESP32_PICO
+
+tinypico.build.f_cpu=240000000L
+tinypico.build.flash_size=4MB
+tinypico.build.flash_freq=80m
+tinypico.build.flash_mode=dio
+tinypico.build.boot=dio
+tinypico.build.partitions=default
+tinypico.build.defines=
+
+tinypico.menu.UploadSpeed.921600=921600
+tinypico.menu.UploadSpeed.921600.upload.speed=921600
+tinypico.menu.UploadSpeed.115200=115200
+tinypico.menu.UploadSpeed.115200.upload.speed=115200
+tinypico.menu.UploadSpeed.256000.windows=256000
+tinypico.menu.UploadSpeed.256000.upload.speed=256000
+tinypico.menu.UploadSpeed.230400.windows.upload.speed=256000
+tinypico.menu.UploadSpeed.230400=230400
+tinypico.menu.UploadSpeed.230400.upload.speed=230400
+tinypico.menu.UploadSpeed.460800.linux=460800
+tinypico.menu.UploadSpeed.460800.macosx=460800
+tinypico.menu.UploadSpeed.460800.upload.speed=460800
+tinypico.menu.UploadSpeed.512000.windows=512000
+tinypico.menu.UploadSpeed.512000.upload.speed=512000
+
+tinypico.menu.FlashMode.qio=QIO
+tinypico.menu.FlashMode.qio.build.flash_mode=dio
+tinypico.menu.FlashMode.qio.build.boot=qio
+tinypico.menu.FlashMode.dio=DIO
+tinypico.menu.FlashMode.dio.build.flash_mode=dio
+tinypico.menu.FlashMode.dio.build.boot=dio
+
+tinypico.menu.FlashFreq.80=80MHz
+tinypico.menu.FlashFreq.80.build.flash_freq=80m
+tinypico.menu.FlashFreq.40=40MHz
+tinypico.menu.FlashFreq.40.build.flash_freq=40m
+
+tinypico.menu.PSRAM.enabled=Enabled
+tinypico.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
+tinypico.menu.PSRAM.disabled=Disabled
+tinypico.menu.PSRAM.disabled.build.defines=
+
+tinypico.menu.DebugLevel.none=None
+tinypico.menu.DebugLevel.none.build.code_debug=0
+tinypico.menu.DebugLevel.error=Error
+tinypico.menu.DebugLevel.error.build.code_debug=1
+tinypico.menu.DebugLevel.warn=Warn
+tinypico.menu.DebugLevel.warn.build.code_debug=2
+tinypico.menu.DebugLevel.info=Info
+tinypico.menu.DebugLevel.info.build.code_debug=3
+tinypico.menu.DebugLevel.debug=Debug
+tinypico.menu.DebugLevel.debug.build.code_debug=4
+tinypico.menu.DebugLevel.verbose=Verbose
+tinypico.menu.DebugLevel.verbose.build.code_debug=5
+
+##############################################################
+magicbit.name=MagicBit
+
+magicbit.upload.tool=esptool_py
+magicbit.upload.maximum_size=1310720
+magicbit.upload.maximum_data_size=327680
+magicbit.upload.wait_for_upload_port=true
+
+magicbit.serial.disableDTR=true
+magicbit.serial.disableRTS=true
+
+magicbit.build.mcu=esp32
+magicbit.build.core=esp32
+magicbit.build.variant=magicbit
+magicbit.build.board=ESP32_DEV
+
+magicbit.build.f_cpu=240000000L
+magicbit.build.flash_size=4MB
+magicbit.build.flash_freq=40m
+magicbit.build.flash_mode=dio
+magicbit.build.boot=dio
+magicbit.build.partitions=default
+
+magicbit.menu.CPUFreq.240=240MHz (WiFi/BT)
+magicbit.menu.CPUFreq.240.build.f_cpu=240000000L
+magicbit.menu.CPUFreq.160=160MHz (WiFi/BT)
+magicbit.menu.CPUFreq.160.build.f_cpu=160000000L
+magicbit.menu.CPUFreq.80=80MHz (WiFi/BT)
+magicbit.menu.CPUFreq.80.build.f_cpu=80000000L
+magicbit.menu.CPUFreq.40=40MHz (40MHz XTAL)
+
+magicbit.menu.UploadSpeed.921600=921600
+magicbit.menu.UploadSpeed.921600.upload.speed=921600
+magicbit.menu.UploadSpeed.115200=115200
+magicbit.menu.UploadSpeed.115200.upload.speed=115200
+##############################################################
 turta_iot_node.name=Turta IoT Node
 
 turta_iot_node.upload.tool=esptool_py
@@ -378,6 +486,128 @@ ttgo-lora32-v1.menu.DebugLevel.verbose.build.code_debug=5
 
 ##############################################################
 
+ttgo-t1.name=TTGO T1
+
+ttgo-t1.upload.tool=esptool_py
+ttgo-t1.upload.maximum_size=1310720
+ttgo-t1.upload.maximum_data_size=327680
+ttgo-t1.upload.wait_for_upload_port=true
+
+ttgo-t1.serial.disableDTR=true
+ttgo-t1.serial.disableRTS=true
+
+ttgo-t1.build.mcu=esp32
+ttgo-t1.build.core=esp32
+ttgo-t1.build.variant=ttgo-t1
+ttgo-t1.build.board=TTGO_T1
+
+ttgo-t1.build.f_cpu=240000000L
+ttgo-t1.build.flash_size=4MB
+ttgo-t1.build.flash_freq=40m
+ttgo-t1.build.flash_mode=dio
+ttgo-t1.build.boot=dio
+ttgo-t1.build.partitions=default
+ttgo-t1.build.defines=
+
+ttgo-t1.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+ttgo-t1.menu.PartitionScheme.default.build.partitions=default
+ttgo-t1.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+ttgo-t1.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+ttgo-t1.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
+ttgo-t1.menu.PartitionScheme.minimal.build.partitions=minimal
+ttgo-t1.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+ttgo-t1.menu.PartitionScheme.no_ota.build.partitions=no_ota
+ttgo-t1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+ttgo-t1.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+ttgo-t1.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+ttgo-t1.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+ttgo-t1.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+ttgo-t1.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+ttgo-t1.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+ttgo-t1.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+ttgo-t1.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+ttgo-t1.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+ttgo-t1.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+ttgo-t1.menu.PartitionScheme.huge_app.build.partitions=huge_app
+ttgo-t1.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+ttgo-t1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+ttgo-t1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+ttgo-t1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+
+ttgo-t1.menu.CPUFreq.240=240MHz (WiFi/BT)
+ttgo-t1.menu.CPUFreq.240.build.f_cpu=240000000L
+ttgo-t1.menu.CPUFreq.160=160MHz (WiFi/BT)
+ttgo-t1.menu.CPUFreq.160.build.f_cpu=160000000L
+ttgo-t1.menu.CPUFreq.80=80MHz (WiFi/BT)
+ttgo-t1.menu.CPUFreq.80.build.f_cpu=80000000L
+ttgo-t1.menu.CPUFreq.40=40MHz (40MHz XTAL)
+ttgo-t1.menu.CPUFreq.40.build.f_cpu=40000000L
+ttgo-t1.menu.CPUFreq.26=26MHz (26MHz XTAL)
+ttgo-t1.menu.CPUFreq.26.build.f_cpu=26000000L
+ttgo-t1.menu.CPUFreq.20=20MHz (40MHz XTAL)
+ttgo-t1.menu.CPUFreq.20.build.f_cpu=20000000L
+ttgo-t1.menu.CPUFreq.13=13MHz (26MHz XTAL)
+ttgo-t1.menu.CPUFreq.13.build.f_cpu=13000000L
+ttgo-t1.menu.CPUFreq.10=10MHz (40MHz XTAL)
+ttgo-t1.menu.CPUFreq.10.build.f_cpu=10000000L
+
+ttgo-t1.menu.FlashMode.qio=QIO
+ttgo-t1.menu.FlashMode.qio.build.flash_mode=dio
+ttgo-t1.menu.FlashMode.qio.build.boot=qio
+ttgo-t1.menu.FlashMode.dio=DIO
+ttgo-t1.menu.FlashMode.dio.build.flash_mode=dio
+ttgo-t1.menu.FlashMode.dio.build.boot=dio
+ttgo-t1.menu.FlashMode.qout=QOUT
+ttgo-t1.menu.FlashMode.qout.build.flash_mode=dout
+ttgo-t1.menu.FlashMode.qout.build.boot=qout
+ttgo-t1.menu.FlashMode.dout=DOUT
+ttgo-t1.menu.FlashMode.dout.build.flash_mode=dout
+ttgo-t1.menu.FlashMode.dout.build.boot=dout
+
+ttgo-t1.menu.FlashFreq.80=80MHz
+ttgo-t1.menu.FlashFreq.80.build.flash_freq=80m
+ttgo-t1.menu.FlashFreq.40=40MHz
+ttgo-t1.menu.FlashFreq.40.build.flash_freq=40m
+
+ttgo-t1.menu.FlashSize.4M=4MB (32Mb)
+ttgo-t1.menu.FlashSize.4M.build.flash_size=4MB
+ttgo-t1.menu.FlashSize.2M=2MB (16Mb)
+ttgo-t1.menu.FlashSize.2M.build.flash_size=2MB
+ttgo-t1.menu.FlashSize.2M.build.partitions=minimal
+ttgo-t1.menu.FlashSize.16M=16MB (128Mb)
+ttgo-t1.menu.FlashSize.16M.build.flash_size=16MB
+ttgo-t1.menu.FlashSize.16M.build.partitions=ffat
+
+ttgo-t1.menu.UploadSpeed.921600=921600
+ttgo-t1.menu.UploadSpeed.921600.upload.speed=921600
+ttgo-t1.menu.UploadSpeed.115200=115200
+ttgo-t1.menu.UploadSpeed.115200.upload.speed=115200
+ttgo-t1.menu.UploadSpeed.256000.windows=256000
+ttgo-t1.menu.UploadSpeed.256000.upload.speed=256000
+ttgo-t1.menu.UploadSpeed.230400.windows.upload.speed=256000
+ttgo-t1.menu.UploadSpeed.230400=230400
+ttgo-t1.menu.UploadSpeed.230400.upload.speed=230400
+ttgo-t1.menu.UploadSpeed.460800.linux=460800
+ttgo-t1.menu.UploadSpeed.460800.macosx=460800
+ttgo-t1.menu.UploadSpeed.460800.upload.speed=460800
+ttgo-t1.menu.UploadSpeed.512000.windows=512000
+ttgo-t1.menu.UploadSpeed.512000.upload.speed=512000
+
+ttgo-t1.menu.DebugLevel.none=None
+ttgo-t1.menu.DebugLevel.none.build.code_debug=0
+ttgo-t1.menu.DebugLevel.error=Error
+ttgo-t1.menu.DebugLevel.error.build.code_debug=1
+ttgo-t1.menu.DebugLevel.warn=Warn
+ttgo-t1.menu.DebugLevel.warn.build.code_debug=2
+ttgo-t1.menu.DebugLevel.info=Info
+ttgo-t1.menu.DebugLevel.info.build.code_debug=3
+ttgo-t1.menu.DebugLevel.debug=Debug
+ttgo-t1.menu.DebugLevel.debug.build.code_debug=4
+ttgo-t1.menu.DebugLevel.verbose=Verbose
+ttgo-t1.menu.DebugLevel.verbose.build.code_debug=5
+
+##############################################################
+
 cw02.name=XinaBox CW02
 
 cw02.upload.tool=esptool_py
@@ -879,6 +1109,23 @@ lolin32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
 lolin32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
 lolin32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
 
+lolin32.menu.CPUFreq.240=240MHz (WiFi/BT)
+lolin32.menu.CPUFreq.240.build.f_cpu=240000000L
+lolin32.menu.CPUFreq.160=160MHz (WiFi/BT)
+lolin32.menu.CPUFreq.160.build.f_cpu=160000000L
+lolin32.menu.CPUFreq.80=80MHz (WiFi/BT)
+lolin32.menu.CPUFreq.80.build.f_cpu=80000000L
+lolin32.menu.CPUFreq.40=40MHz (40MHz XTAL)
+lolin32.menu.CPUFreq.40.build.f_cpu=40000000L
+lolin32.menu.CPUFreq.26=26MHz (26MHz XTAL)
+lolin32.menu.CPUFreq.26.build.f_cpu=26000000L
+lolin32.menu.CPUFreq.20=20MHz (40MHz XTAL)
+lolin32.menu.CPUFreq.20.build.f_cpu=20000000L
+lolin32.menu.CPUFreq.13=13MHz (26MHz XTAL)
+lolin32.menu.CPUFreq.13.build.f_cpu=13000000L
+lolin32.menu.CPUFreq.10=10MHz (40MHz XTAL)
+lolin32.menu.CPUFreq.10.build.f_cpu=10000000L
+
 lolin32.menu.UploadSpeed.921600=921600
 lolin32.menu.UploadSpeed.921600.upload.speed=921600
 lolin32.menu.UploadSpeed.115200=115200
@@ -1814,6 +2061,121 @@ esp32-poe.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
 
 ##############################################################
 
+esp32-poe-iso.name=OLIMEX ESP32-PoE-ISO
+
+esp32-poe-iso.upload.tool=esptool_py
+esp32-poe-iso.upload.maximum_size=1310720
+esp32-poe-iso.upload.maximum_data_size=327680
+esp32-poe-iso.upload.wait_for_upload_port=true
+
+esp32-poe-iso.serial.disableDTR=true
+esp32-poe-iso.serial.disableRTS=true
+
+esp32-poe-iso.build.mcu=esp32
+esp32-poe-iso.build.core=esp32
+esp32-poe-iso.build.variant=esp32-poe-iso
+esp32-poe-iso.build.board=ESP32_POE_ISO
+
+esp32-poe-iso.build.f_cpu=240000000L
+esp32-poe-iso.build.flash_mode=dio
+esp32-poe-iso.build.flash_size=4MB
+esp32-poe-iso.build.boot=dio
+esp32-poe-iso.build.partitions=default
+esp32-poe-iso.build.defines=
+
+esp32-poe-iso.menu.FlashFreq.80=80MHz
+esp32-poe-iso.menu.FlashFreq.80.build.flash_freq=80m
+esp32-poe-iso.menu.FlashFreq.40=40MHz
+esp32-poe-iso.menu.FlashFreq.40.build.flash_freq=40m
+
+
+esp32-poe-iso.menu.UploadSpeed.115200=115200
+esp32-poe-iso.menu.UploadSpeed.115200.upload.speed=115200
+
+esp32-poe-iso.menu.PartitionScheme.default=Default
+esp32-poe-iso.menu.PartitionScheme.default.build.partitions=default
+esp32-poe-iso.menu.PartitionScheme.no_ota=No OTA (Large APP)
+esp32-poe-iso.menu.PartitionScheme.no_ota.build.partitions=no_ota
+esp32-poe-iso.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+esp32-poe-iso.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
+esp32-poe-iso.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+esp32-poe-iso.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+
+##############################################################
+
+esp32-DevKitLipo.name=OLIMEX ESP32-DevKit-LiPo
+
+esp32-DevKitLipo.upload.tool=esptool_py
+esp32-DevKitLipo.upload.maximum_size=1310720
+esp32-DevKitLipo.upload.maximum_data_size=327680
+esp32-DevKitLipo.upload.wait_for_upload_port=true
+
+esp32-DevKitLipo.serial.disableDTR=true
+esp32-DevKitLipo.serial.disableRTS=true
+
+esp32-DevKitLipo.build.mcu=esp32
+esp32-DevKitLipo.build.core=esp32
+esp32-DevKitLipo.build.variant=esp32-devkit-lipo
+esp32-DevKitLipo.build.board=ESP32_DEVKIT_LIPO
+
+esp32-DevKitLipo.build.f_cpu=240000000L
+esp32-DevKitLipo.build.flash_size=4MB
+esp32-DevKitLipo.build.flash_freq=40m
+esp32-DevKitLipo.build.flash_mode=dio
+esp32-DevKitLipo.build.boot=dio
+esp32-DevKitLipo.build.partitions=default
+esp32-DevKitLipo.build.defines=
+
+esp32-DevKitLipo.menu.PartitionScheme.default=Default
+esp32-DevKitLipo.menu.PartitionScheme.default.build.partitions=default
+esp32-DevKitLipo.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
+esp32-DevKitLipo.menu.PartitionScheme.minimal.build.partitions=minimal
+esp32-DevKitLipo.menu.PartitionScheme.no_ota=No OTA (Large APP)
+esp32-DevKitLipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
+esp32-DevKitLipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+esp32-DevKitLipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
+esp32-DevKitLipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
+esp32-DevKitLipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+esp32-DevKitLipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
+esp32-DevKitLipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+esp32-DevKitLipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+esp32-DevKitLipo.menu.PartitionScheme.fatflash=16M Fat
+esp32-DevKitLipo.menu.PartitionScheme.fatflash.build.partitions=ffat
+
+esp32-DevKitLipo.menu.FlashMode.qio=QIO
+esp32-DevKitLipo.menu.FlashMode.qio.build.flash_mode=dio
+esp32-DevKitLipo.menu.FlashMode.qio.build.boot=qio
+esp32-DevKitLipo.menu.FlashMode.dio=DIO
+esp32-DevKitLipo.menu.FlashMode.dio.build.flash_mode=dio
+esp32-DevKitLipo.menu.FlashMode.dio.build.boot=dio
+esp32-DevKitLipo.menu.FlashMode.qout=QOUT
+esp32-DevKitLipo.menu.FlashMode.qout.build.flash_mode=dout
+esp32-DevKitLipo.menu.FlashMode.qout.build.boot=qout
+esp32-DevKitLipo.menu.FlashMode.dout=DOUT
+esp32-DevKitLipo.menu.FlashMode.dout.build.flash_mode=dout
+esp32-DevKitLipo.menu.FlashMode.dout.build.boot=dout
+
+esp32-DevKitLipo.menu.FlashFreq.80=80MHz
+esp32-DevKitLipo.menu.FlashFreq.80.build.flash_freq=80m
+esp32-DevKitLipo.menu.FlashFreq.40=40MHz
+esp32-DevKitLipo.menu.FlashFreq.40.build.flash_freq=40m
+
+esp32-DevKitLipo.menu.UploadSpeed.921600=921600
+esp32-DevKitLipo.menu.UploadSpeed.921600.upload.speed=921600
+esp32-DevKitLipo.menu.UploadSpeed.115200=115200
+esp32-DevKitLipo.menu.UploadSpeed.115200.upload.speed=115200
+esp32-DevKitLipo.menu.UploadSpeed.256000.windows=256000
+esp32-DevKitLipo.menu.UploadSpeed.256000.upload.speed=256000
+esp32-DevKitLipo.menu.UploadSpeed.230400.windows.upload.speed=256000
+esp32-DevKitLipo.menu.UploadSpeed.230400=230400
+esp32-DevKitLipo.menu.UploadSpeed.230400.upload.speed=230400
+esp32-DevKitLipo.menu.UploadSpeed.460800.linux=460800
+esp32-DevKitLipo.menu.UploadSpeed.460800.macosx=460800
+esp32-DevKitLipo.menu.UploadSpeed.460800.upload.speed=460800
+esp32-DevKitLipo.menu.UploadSpeed.512000.windows=512000
+esp32-DevKitLipo.menu.UploadSpeed.512000.upload.speed=512000
+##############################################################
+
 espino32.name=ThaiEasyElec's ESPino32
 
 espino32.upload.tool=esptool_py
@@ -2443,7 +2805,7 @@ heltec_wifi_lora_32_V2.menu.FlashFreq.40.build.flash_freq=40m
 
 heltec_wifi_lora_32_V2.menu.FlashSize.8M=8MB (64Mb)
 heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.flash_size=8MB
-heltec_wifi_lora_32_V2.menu.FlashSize.2M.build.partitions=default_8MB
+heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.partitions=default_8MB
 heltec_wifi_lora_32_V2.menu.FlashSize.4M=4MB (32Mb)
 heltec_wifi_lora_32_V2.menu.FlashSize.4M.build.flash_size=4MB
 heltec_wifi_lora_32_V2.menu.FlashSize.2M=2MB (16Mb)
@@ -2744,16 +3106,54 @@ alksesp32.build.boot=dio
 alksesp32.build.partitions=default
 alksesp32.build.defines=
 
-alksesp32.menu.PartitionScheme.default=Default
+alksesp32.menu.PSRAM.disabled=Disabled
+alksesp32.menu.PSRAM.disabled.build.defines=
+alksesp32.menu.PSRAM.enabled=Enabled
+alksesp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
+
+alksesp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
 alksesp32.menu.PartitionScheme.default.build.partitions=default
-alksesp32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
+alksesp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+alksesp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+alksesp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
 alksesp32.menu.PartitionScheme.minimal.build.partitions=minimal
-alksesp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
+alksesp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
 alksesp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
 alksesp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
-alksesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
+alksesp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+alksesp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+alksesp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+alksesp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+alksesp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+alksesp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+alksesp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+alksesp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+alksesp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+alksesp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+alksesp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
+alksesp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+alksesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
 alksesp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
 alksesp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+alksesp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
+alksesp32.menu.PartitionScheme.fatflash.build.partitions=ffat
+
+alksesp32.menu.CPUFreq.240=240MHz (WiFi/BT)
+alksesp32.menu.CPUFreq.240.build.f_cpu=240000000L
+alksesp32.menu.CPUFreq.160=160MHz (WiFi/BT)
+alksesp32.menu.CPUFreq.160.build.f_cpu=160000000L
+alksesp32.menu.CPUFreq.80=80MHz (WiFi/BT)
+alksesp32.menu.CPUFreq.80.build.f_cpu=80000000L
+alksesp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
+alksesp32.menu.CPUFreq.40.build.f_cpu=40000000L
+alksesp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
+alksesp32.menu.CPUFreq.26.build.f_cpu=26000000L
+alksesp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
+alksesp32.menu.CPUFreq.20.build.f_cpu=20000000L
+alksesp32.menu.CPUFreq.13=13MHz (26MHz XTAL)
+alksesp32.menu.CPUFreq.13.build.f_cpu=13000000L
+alksesp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
+alksesp32.menu.CPUFreq.10.build.f_cpu=10000000L
 
 alksesp32.menu.FlashMode.qio=QIO
 alksesp32.menu.FlashMode.qio.build.flash_mode=dio
@@ -2778,6 +3178,9 @@ alksesp32.menu.FlashSize.4M.build.flash_size=4MB
 alksesp32.menu.FlashSize.2M=2MB (16Mb)
 alksesp32.menu.FlashSize.2M.build.flash_size=2MB
 alksesp32.menu.FlashSize.2M.build.partitions=minimal
+alksesp32.menu.FlashSize.16M=16MB (128Mb)
+alksesp32.menu.FlashSize.16M.build.flash_size=16MB
+alksesp32.menu.FlashSize.16M.build.partitions=ffat
 
 alksesp32.menu.UploadSpeed.921600=921600
 alksesp32.menu.UploadSpeed.921600.upload.speed=921600
@@ -3522,4 +3925,197 @@ sparkfun_lora_gateway_1-channel.menu.UploadSpeed.512000.upload.speed=512000
 
 ##############################################################
 
+ttgo-t-watch.name=TTGO T-Watch
+
+ttgo-t-watch.upload.tool=esptool_py
+ttgo-t-watch.upload.maximum_size=6553600
+ttgo-t-watch.upload.maximum_data_size=4521984
+ttgo-t-watch.upload.wait_for_upload_port=true
+
+ttgo-t-watch.serial.disableDTR=true
+ttgo-t-watch.serial.disableRTS=true
+
+ttgo-t-watch.build.mcu=esp32
+ttgo-t-watch.build.core=esp32
+ttgo-t-watch.build.variant=twatch
+ttgo-t-watch.build.board=T-Watch
+
+ttgo-t-watch.build.f_cpu=240000000L
+ttgo-t-watch.build.flash_size=16MB
+ttgo-t-watch.build.flash_freq=80m
+ttgo-t-watch.build.flash_mode=dio
+ttgo-t-watch.build.boot=dio
+ttgo-t-watch.build.partitions=default_16MB
+ttgo-t-watch.build.defines=
+
+ttgo-t-watch.menu.PSRAM.enabled=Enabled
+ttgo-t-watch.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
+ttgo-t-watch.menu.PSRAM.disabled=Disabled
+ttgo-t-watch.menu.PSRAM.disabled.build.defines=
+
+ttgo-t-watch.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
+ttgo-t-watch.menu.PartitionScheme.default.build.partitions=default_16MB
+ttgo-t-watch.menu.PartitionScheme.large_spiffs=Large SPIFFS (7 MB)
+ttgo-t-watch.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
+ttgo-t-watch.menu.PartitionScheme.large_spiffs.upload.maximum_size=4685824
+
+ttgo-t-watch.menu.UploadSpeed.2000000=2000000
+ttgo-t-watch.menu.UploadSpeed.2000000.upload.speed=2000000
+ttgo-t-watch.menu.UploadSpeed.1152000=1152000
+ttgo-t-watch.menu.UploadSpeed.1152000.upload.speed=1152000
+ttgo-t-watch.menu.UploadSpeed.921600=921600
+ttgo-t-watch.menu.UploadSpeed.921600.upload.speed=921600
+ttgo-t-watch.menu.UploadSpeed.115200=115200
+ttgo-t-watch.menu.UploadSpeed.115200.upload.speed=115200
+ttgo-t-watch.menu.UploadSpeed.256000.windows=256000
+ttgo-t-watch.menu.UploadSpeed.256000.upload.speed=256000
+ttgo-t-watch.menu.UploadSpeed.230400.windows.upload.speed=256000
+ttgo-t-watch.menu.UploadSpeed.230400=230400
+ttgo-t-watch.menu.UploadSpeed.230400.upload.speed=230400
+ttgo-t-watch.menu.UploadSpeed.460800.linux=460800
+ttgo-t-watch.menu.UploadSpeed.460800.macosx=460800
+ttgo-t-watch.menu.UploadSpeed.460800.upload.speed=460800
+ttgo-t-watch.menu.UploadSpeed.512000.windows=512000
+ttgo-t-watch.menu.UploadSpeed.512000.upload.speed=512000
+
+ttgo-t-watch.menu.DebugLevel.none=None
+ttgo-t-watch.menu.DebugLevel.none.build.code_debug=0
+ttgo-t-watch.menu.DebugLevel.error=Error
+ttgo-t-watch.menu.DebugLevel.error.build.code_debug=1
+ttgo-t-watch.menu.DebugLevel.warn=Warn
+ttgo-t-watch.menu.DebugLevel.warn.build.code_debug=2
+ttgo-t-watch.menu.DebugLevel.info=Info
+ttgo-t-watch.menu.DebugLevel.info.build.code_debug=3
+ttgo-t-watch.menu.DebugLevel.debug=Debug
+ttgo-t-watch.menu.DebugLevel.debug.build.code_debug=4
+ttgo-t-watch.menu.DebugLevel.verbose=Verbose
+ttgo-t-watch.menu.DebugLevel.verbose.build.code_debug=5
+
+##############################################################
+
+d1_mini32.name=WEMOS D1 MINI ESP32
+
+d1_mini32.upload.tool=esptool_py
+d1_mini32.upload.maximum_size=1310720
+d1_mini32.upload.maximum_data_size=327680
+d1_mini32.upload.wait_for_upload_port=true
+
+d1_mini32.serial.disableDTR=true
+d1_mini32.serial.disableRTS=true
+
+d1_mini32.build.mcu=esp32
+d1_mini32.build.core=esp32
+d1_mini32.build.variant=d1_mini32
+d1_mini32.build.board=D1_MINI32
+
+d1_mini32.build.f_cpu=240000000L
+d1_mini32.build.flash_mode=dio
+d1_mini32.build.flash_size=4MB
+d1_mini32.build.boot=dio
+d1_mini32.build.partitions=default
+d1_mini32.build.defines=
+
+d1_mini32.menu.FlashFreq.80=80MHz
+d1_mini32.menu.FlashFreq.80.build.flash_freq=80m
+d1_mini32.menu.FlashFreq.40=40MHz
+d1_mini32.menu.FlashFreq.40.build.flash_freq=40m
+
+d1_mini32.menu.PartitionScheme.default=Default
+d1_mini32.menu.PartitionScheme.default.build.partitions=default
+d1_mini32.menu.PartitionScheme.no_ota=No OTA (Large APP)
+d1_mini32.menu.PartitionScheme.no_ota.build.partitions=no_ota
+d1_mini32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+d1_mini32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
+d1_mini32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+d1_mini32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+
+d1_mini32.menu.CPUFreq.240=240MHz (WiFi/BT)
+d1_mini32.menu.CPUFreq.240.build.f_cpu=240000000L
+d1_mini32.menu.CPUFreq.160=160MHz (WiFi/BT)
+d1_mini32.menu.CPUFreq.160.build.f_cpu=160000000L
+d1_mini32.menu.CPUFreq.80=80MHz (WiFi/BT)
+d1_mini32.menu.CPUFreq.80.build.f_cpu=80000000L
+d1_mini32.menu.CPUFreq.40=40MHz (40MHz XTAL)
+d1_mini32.menu.CPUFreq.40.build.f_cpu=40000000L
+d1_mini32.menu.CPUFreq.26=26MHz (26MHz XTAL)
+d1_mini32.menu.CPUFreq.26.build.f_cpu=26000000L
+d1_mini32.menu.CPUFreq.20=20MHz (40MHz XTAL)
+d1_mini32.menu.CPUFreq.20.build.f_cpu=20000000L
+d1_mini32.menu.CPUFreq.13=13MHz (26MHz XTAL)
+d1_mini32.menu.CPUFreq.13.build.f_cpu=13000000L
+d1_mini32.menu.CPUFreq.10=10MHz (40MHz XTAL)
+d1_mini32.menu.CPUFreq.10.build.f_cpu=10000000L
+
+d1_mini32.menu.UploadSpeed.921600=921600
+d1_mini32.menu.UploadSpeed.921600.upload.speed=921600
+d1_mini32.menu.UploadSpeed.115200=115200
+d1_mini32.menu.UploadSpeed.115200.upload.speed=115200
+d1_mini32.menu.UploadSpeed.256000.windows=256000
+d1_mini32.menu.UploadSpeed.256000.upload.speed=256000
+d1_mini32.menu.UploadSpeed.230400.windows.upload.speed=256000
+d1_mini32.menu.UploadSpeed.230400=230400
+d1_mini32.menu.UploadSpeed.230400.upload.speed=230400
+d1_mini32.menu.UploadSpeed.460800.linux=460800
+d1_mini32.menu.UploadSpeed.460800.macosx=460800
+d1_mini32.menu.UploadSpeed.460800.upload.speed=460800
+d1_mini32.menu.UploadSpeed.512000.windows=512000
+d1_mini32.menu.UploadSpeed.512000.upload.speed=512000
+
+##############################################################
+
+gpy.name=Pycom GPy
+
+gpy.upload.tool=esptool_py
+gpy.upload.maximum_size=1310720
+gpy.upload.maximum_data_size=327680
+gpy.upload.wait_for_upload_port=true
+
+gpy.serial.disableDTR=true
+gpy.serial.disableRTS=true
+
+gpy.build.mcu=esp32
+gpy.build.core=esp32
+gpy.build.variant=gpy
+gpy.build.board=PYCOM_GPY
+
+gpy.build.f_cpu=240000000L
+gpy.build.flash_mode=dio
+gpy.build.flash_size=8MB
+gpy.build.boot=dio
+gpy.build.partitions=default
+
+gpy.menu.FlashFreq.80=80MHz
+gpy.menu.FlashFreq.80.build.flash_freq=80m
+gpy.menu.FlashFreq.40=40MHz
+gpy.menu.FlashFreq.40.build.flash_freq=40m
+
+gpy.menu.UploadSpeed.921600=921600
+gpy.menu.UploadSpeed.921600.upload.speed=921600
+gpy.menu.UploadSpeed.115200=115200
+gpy.menu.UploadSpeed.115200.upload.speed=115200
+gpy.menu.UploadSpeed.256000.windows=256000
+gpy.menu.UploadSpeed.256000.upload.speed=256000
+gpy.menu.UploadSpeed.230400.windows.upload.speed=256000
+gpy.menu.UploadSpeed.230400=230400
+gpy.menu.UploadSpeed.230400.upload.speed=230400
+gpy.menu.UploadSpeed.460800.linux=460800
+gpy.menu.UploadSpeed.460800.macosx=460800
+gpy.menu.UploadSpeed.460800.upload.speed=460800
+gpy.menu.UploadSpeed.512000.windows=512000
+gpy.menu.UploadSpeed.512000.upload.speed=512000
+
+gpy.menu.DebugLevel.none=None
+gpy.menu.DebugLevel.none.build.code_debug=0
+gpy.menu.DebugLevel.error=Error
+gpy.menu.DebugLevel.error.build.code_debug=1
+gpy.menu.DebugLevel.warn=Warn
+gpy.menu.DebugLevel.warn.build.code_debug=2
+gpy.menu.DebugLevel.info=Info
+gpy.menu.DebugLevel.info.build.code_debug=3
+gpy.menu.DebugLevel.debug=Debug
+gpy.menu.DebugLevel.debug.build.code_debug=4
+gpy.menu.DebugLevel.verbose=Verbose
+gpy.menu.DebugLevel.verbose.build.code_debug=5
+
+##############################################################
 

cores/esp32/Arduino.h

@@ -68,12 +68,6 @@
 #define __STRINGIFY(a) #a
 #endif
 
-// undefine stdlib's abs if encountered
-#ifdef abs
-#undef abs
-#endif
-
-#define abs(x) ((x)>0?(x):-(x))
 #define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
 #define radians(deg) ((deg)*DEG_TO_RAD)
 #define degrees(rad) ((rad)*RAD_TO_DEG)
@@ -160,6 +154,7 @@ void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
 #include "HardwareSerial.h"
 #include "Esp.h"
 
+using std::abs;
 using std::isinf;
 using std::isnan;
 using std::max;

cores/esp32/Esp.h

@@ -75,7 +75,7 @@ public:
     uint32_t getMaxAllocPsram();
 
     uint8_t getChipRevision();
-    uint8_t getCpuFreqMHz(){ return CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ; }
+    uint32_t getCpuFreqMHz(){ return getCpuFrequencyMhz(); }
     uint32_t getCycleCount();
     const char * getSdkVersion();
 

cores/esp32/Print.cpp

@@ -52,7 +52,7 @@ size_t Print::printf(const char *format, ...)
     va_list copy;
     va_start(arg, format);
     va_copy(copy, arg);
-    size_t len = vsnprintf(NULL, 0, format, arg);
+    size_t len = vsnprintf(NULL, 0, format, copy);
     va_end(copy);
     if(len >= sizeof(loc_buf)){
         temp = new char[len+1];

cores/esp32/Stream.h

@@ -97,8 +97,8 @@ public:
 
     float parseFloat();               // float version of parseInt
 
-    size_t readBytes(char *buffer, size_t length); // read chars from stream into buffer
-    size_t readBytes(uint8_t *buffer, size_t length)
+    virtual size_t readBytes(char *buffer, size_t length); // read chars from stream into buffer
+    virtual size_t readBytes(uint8_t *buffer, size_t length)
     {
         return readBytes((char *) buffer, length);
     }
@@ -114,7 +114,7 @@ public:
     // returns the number of characters placed in the buffer (0 means no valid data found)
 
     // Arduino String functions to be added here
-    String readString();
+    virtual String readString();
     String readStringUntil(char terminator);
 
 protected:

cores/esp32/StreamString.cpp

@@ -2,6 +2,7 @@
  StreamString.cpp
 
  Copyright (c) 2015 Markus Sattler. All rights reserved.
+ This file is part of the esp8266 core for Arduino environment.
 
  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
@@ -22,31 +23,28 @@
 #include <Arduino.h>
 #include "StreamString.h"
 
-size_t StreamString::write(const uint8_t *data, size_t size)
-{
+size_t StreamString::write(const uint8_t *data, size_t size) {
     if(size && data) {
-        if(reserve(length() + size + 1)) {
-            memcpy((void *) (buffer + len), (const void *) data, size);
-            len += size;
-            *(buffer + len) = 0x00; // add null for string end
+        const unsigned int newlen = length() + size;
+        if(reserve(newlen + 1)) {
+            memcpy((void *) (wbuffer() + len()), (const void *) data, size);
+            setLen(newlen);
+            *(wbuffer() + newlen) = 0x00; // add null for string end
             return size;
         }
     }
     return 0;
 }
 
-size_t StreamString::write(uint8_t data)
-{
+size_t StreamString::write(uint8_t data) {
     return concat((char) data);
 }
 
-int StreamString::available()
-{
+int StreamString::available() {
     return length();
 }
 
-int StreamString::read()
-{
+int StreamString::read() {
     if(length()) {
         char c = charAt(0);
         remove(0, 1);
@@ -56,8 +54,7 @@ int StreamString::read()
     return -1;
 }
 
-int StreamString::peek()
-{
+int StreamString::peek() {
     if(length()) {
         char c = charAt(0);
         return c;
@@ -65,7 +62,6 @@ int StreamString::peek()
     return -1;
 }
 
-void StreamString::flush()
-{
+void StreamString::flush() {
 }
 

cores/esp32/WMath.cpp

@@ -65,9 +65,12 @@ long random(long howsmall, long howbig)
     return random(diff) + howsmall;
 }
 
-long map(long x, long in_min, long in_max, long out_min, long out_max)
-{
-    return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+long map(long x, long in_min, long in_max, long out_min, long out_max) {
+    long divisor = (in_max - in_min);
+    if(divisor == 0){
+        return -1; //AVR returns -1, SAM returns 0
+    }
+    return (x - in_min) * (out_max - out_min) / divisor + out_min;
 }
 
 unsigned int makeWord(unsigned int w)

cores/esp32/WString.h

@@ -27,6 +27,7 @@
 #include <string.h>
 #include <ctype.h>
 #include <pgmspace.h>
+#include <stdint.h>
 
 // An inherited class for holding the result of a concatenation.  These
 // result objects are assumed to be writable by subsequent concatenations.
@@ -35,295 +36,300 @@ class StringSumHelper;
 // an abstract class used as a means to proide a unique pointer type
 // but really has no body
 class __FlashStringHelper;
-#define F(string_literal) (reinterpret_cast<const __FlashStringHelper *>(PSTR(string_literal)))
+#define FPSTR(pstr_pointer) (reinterpret_cast<const __FlashStringHelper *>(pstr_pointer))
+#define F(string_literal) (FPSTR(PSTR(string_literal)))
 
 // The string class
-class String
-{
-    // use a function pointer to allow for "if (s)" without the
-    // complications of an operator bool(). for more information, see:
-    // http://www.artima.com/cppsource/safebool.html
-    typedef void (String::*StringIfHelperType)() const;
-    void StringIfHelper() const
-    {
-    }
-
-public:
-    // constructors
-    // creates a copy of the initial value.
-    // if the initial value is null or invalid, or if memory allocation
-    // fails, the string will be marked as invalid (i.e. "if (s)" will
-    // be false).
-    String(const char *cstr = "");
-    String(const String &str);
-    String(const __FlashStringHelper *str) : String(reinterpret_cast<const char *>(str)) {};
-#ifdef __GXX_EXPERIMENTAL_CXX0X__
-    String(String &&rval);
-    String(StringSumHelper &&rval);
-#endif
-    explicit String(char c);
-    explicit String(unsigned char, unsigned char base = 10);
-    explicit String(int, unsigned char base = 10);
-    explicit String(unsigned int, unsigned char base = 10);
-    explicit String(long, unsigned char base = 10);
-    explicit String(unsigned long, unsigned char base = 10);
-    explicit String(float, unsigned char decimalPlaces = 2);
-    explicit String(double, unsigned char decimalPlaces = 2);
-    ~String(void);
-
-    // memory management
-    // return true on success, false on failure (in which case, the string
-    // is left unchanged).  reserve(0), if successful, will validate an
-    // invalid string (i.e., "if (s)" will be true afterwards)
-    unsigned char reserve(unsigned int size);
-    inline unsigned int length(void) const
-    {
-        if(buffer) {
-            return len;
-        } else {
-            return 0;
+class String {
+        // use a function pointer to allow for "if (s)" without the
+        // complications of an operator bool(). for more information, see:
+        // http://www.artima.com/cppsource/safebool.html
+        typedef void (String::*StringIfHelperType)() const;
+        void StringIfHelper() const {
         }
-    }
 
-    // creates a copy of the assigned value.  if the value is null or
-    // invalid, or if the memory allocation fails, the string will be
-    // marked as invalid ("if (s)" will be false).
-    String & operator =(const String &rhs);
-    String & operator =(const char *cstr);
-    String & operator = (const __FlashStringHelper *str);
+    public:
+        // constructors
+        // creates a copy of the initial value.
+        // if the initial value is null or invalid, or if memory allocation
+        // fails, the string will be marked as invalid (i.e. "if (s)" will
+        // be false).
+        String(const char *cstr = "");
+        String(const String &str);
+        String(const __FlashStringHelper *str);
 #ifdef __GXX_EXPERIMENTAL_CXX0X__
-    String & operator =(String &&rval);
-    String & operator =(StringSumHelper &&rval);
+        String(String &&rval);
+        String(StringSumHelper &&rval);
+#endif
+        explicit String(char c);
+        explicit String(unsigned char, unsigned char base = 10);
+        explicit String(int, unsigned char base = 10);
+        explicit String(unsigned int, unsigned char base = 10);
+        explicit String(long, unsigned char base = 10);
+        explicit String(unsigned long, unsigned char base = 10);
+        explicit String(float, unsigned char decimalPlaces = 2);
+        explicit String(double, unsigned char decimalPlaces = 2);
+        ~String(void);
+
+        // memory management
+        // return true on success, false on failure (in which case, the string
+        // is left unchanged).  reserve(0), if successful, will validate an
+        // invalid string (i.e., "if (s)" will be true afterwards)
+        unsigned char reserve(unsigned int size);
+        inline unsigned int length(void) const {
+            if(buffer()) {
+                return len();
+            } else {
+                return 0;
+            }
+        }
+        inline void clear(void) {
+            setLen(0);
+        }
+        inline bool isEmpty(void) const {
+            return length() == 0;
+        }
+
+        // creates a copy of the assigned value.  if the value is null or
+        // invalid, or if the memory allocation fails, the string will be
+        // marked as invalid ("if (s)" will be false).
+        String & operator =(const String &rhs);
+        String & operator =(const char *cstr);
+        String & operator = (const __FlashStringHelper *str);
+#ifdef __GXX_EXPERIMENTAL_CXX0X__
+        String & operator =(String &&rval);
+        String & operator =(StringSumHelper &&rval);
 #endif
 
-    // concatenate (works w/ built-in types)
+        // concatenate (works w/ built-in types)
 
-    // returns true on success, false on failure (in which case, the string
-    // is left unchanged).  if the argument is null or invalid, the
-    // concatenation is considered unsucessful.
-    unsigned char concat(const String &str);
-    unsigned char concat(const char *cstr);
-    unsigned char concat(char c);
-    unsigned char concat(unsigned char c);
-    unsigned char concat(int num);
-    unsigned char concat(unsigned int num);
-    unsigned char concat(long num);
-    unsigned char concat(unsigned long num);
-    unsigned char concat(float num);
-    unsigned char concat(double num);
-    unsigned char concat(const __FlashStringHelper * str);
+        // returns true on success, false on failure (in which case, the string
+        // is left unchanged).  if the argument is null or invalid, the
+        // concatenation is considered unsuccessful.
+        unsigned char concat(const String &str);
+        unsigned char concat(const char *cstr);
+        unsigned char concat(char c);
+        unsigned char concat(unsigned char c);
+        unsigned char concat(int num);
+        unsigned char concat(unsigned int num);
+        unsigned char concat(long num);
+        unsigned char concat(unsigned long num);
+        unsigned char concat(float num);
+        unsigned char concat(double num);
+        unsigned char concat(const __FlashStringHelper * str);
 
-    // if there's not enough memory for the concatenated value, the string
-    // will be left unchanged (but this isn't signalled in any way)
-    String & operator +=(const String &rhs)
-    {
-        concat(rhs);
-        return (*this);
-    }
-    String & operator +=(const char *cstr)
-    {
-        concat(cstr);
-        return (*this);
-    }
-    String & operator +=(char c)
-    {
-        concat(c);
-        return (*this);
-    }
-    String & operator +=(unsigned char num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(int num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(unsigned int num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(long num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(unsigned long num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(float num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator +=(double num)
-    {
-        concat(num);
-        return (*this);
-    }
-    String & operator += (const __FlashStringHelper *str)
-    {
-        concat(str);
-        return (*this);
-    }
+        // if there's not enough memory for the concatenated value, the string
+        // will be left unchanged (but this isn't signalled in any way)
+        String & operator +=(const String &rhs) {
+            concat(rhs);
+            return (*this);
+        }
+        String & operator +=(const char *cstr) {
+            concat(cstr);
+            return (*this);
+        }
+        String & operator +=(char c) {
+            concat(c);
+            return (*this);
+        }
+        String & operator +=(unsigned char num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(int num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(unsigned int num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(long num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(unsigned long num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(float num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator +=(double num) {
+            concat(num);
+            return (*this);
+        }
+        String & operator += (const __FlashStringHelper *str){
+            concat(str);
+            return (*this);
+        }
 
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, const String &rhs);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, const char *cstr);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, char c);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned char num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, int num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned int num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, long num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned long num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, float num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, double num);
-    friend StringSumHelper & operator +(const StringSumHelper &lhs, const __FlashStringHelper *rhs);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, const String &rhs);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, const char *cstr);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, char c);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned char num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, int num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned int num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, long num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, unsigned long num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, float num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, double num);
+        friend StringSumHelper & operator +(const StringSumHelper &lhs, const __FlashStringHelper *rhs);
 
-    // comparison (only works w/ Strings and "strings")
-    operator StringIfHelperType() const
-    {
-        return buffer ? &String::StringIfHelper : 0;
-    }
-    int compareTo(const String &s) const;
-    unsigned char equals(const String &s) const;
-    unsigned char equals(const char *cstr) const;
-    unsigned char operator ==(const String &rhs) const
-    {
-        return equals(rhs);
-    }
-    unsigned char operator ==(const char *cstr) const
-    {
-        return equals(cstr);
-    }
-    unsigned char operator !=(const String &rhs) const
-    {
-        return !equals(rhs);
-    }
-    unsigned char operator !=(const char *cstr) const
-    {
-        return !equals(cstr);
-    }
-    unsigned char operator <(const String &rhs) const;
-    unsigned char operator >(const String &rhs) const;
-    unsigned char operator <=(const String &rhs) const;
-    unsigned char operator >=(const String &rhs) const;
-    unsigned char equalsIgnoreCase(const String &s) const;
-    unsigned char equalsConstantTime(const String &s) const;
-    unsigned char startsWith(const String &prefix) const;
-    unsigned char startsWith(const String &prefix, unsigned int offset) const;
-    unsigned char endsWith(const String &suffix) const;
+        // comparison (only works w/ Strings and "strings")
+        operator StringIfHelperType() const {
+            return buffer() ? &String::StringIfHelper : 0;
+        }
+        int compareTo(const String &s) const;
+        unsigned char equals(const String &s) const;
+        unsigned char equals(const char *cstr) const;
+        unsigned char operator ==(const String &rhs) const {
+            return equals(rhs);
+        }
+        unsigned char operator ==(const char *cstr) const {
+            return equals(cstr);
+        }
+        unsigned char operator !=(const String &rhs) const {
+            return !equals(rhs);
+        }
+        unsigned char operator !=(const char *cstr) const {
+            return !equals(cstr);
+        }
+        unsigned char operator <(const String &rhs) const;
+        unsigned char operator >(const String &rhs) const;
+        unsigned char operator <=(const String &rhs) const;
+        unsigned char operator >=(const String &rhs) const;
+        unsigned char equalsIgnoreCase(const String &s) const;
+        unsigned char equalsConstantTime(const String &s) const;
+        unsigned char startsWith(const String &prefix) const;
+        unsigned char startsWith(const String &prefix, unsigned int offset) const;
+        unsigned char endsWith(const String &suffix) const;
 
-    // character acccess
-    char charAt(unsigned int index) const;
-    void setCharAt(unsigned int index, char c);
-    char operator [](unsigned int index) const;
-    char& operator [](unsigned int index);
-    void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index = 0) const;
-    void toCharArray(char *buf, unsigned int bufsize, unsigned int index = 0) const
-    {
-        getBytes((unsigned char *) buf, bufsize, index);
-    }
-    const char * c_str() const
-    {
-        return buffer;
-    }
+        // character access
+        char charAt(unsigned int index) const;
+        void setCharAt(unsigned int index, char c);
+        char operator [](unsigned int index) const;
+        char& operator [](unsigned int index);
+        void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index = 0) const;
+        void toCharArray(char *buf, unsigned int bufsize, unsigned int index = 0) const {
+            getBytes((unsigned char *) buf, bufsize, index);
+        }
+        const char* c_str() const { return buffer(); }
+        char* begin() { return wbuffer(); }
+        char* end() { return wbuffer() + length(); }
+        const char* begin() const { return c_str(); }
+        const char* end() const { return c_str() + length(); }
 
-    // search
-    int indexOf(char ch) const;
-    int indexOf(char ch, unsigned int fromIndex) const;
-    int indexOf(const String &str) const;
-    int indexOf(const String &str, unsigned int fromIndex) const;
-    int lastIndexOf(char ch) const;
-    int lastIndexOf(char ch, unsigned int fromIndex) const;
-    int lastIndexOf(const String &str) const;
-    int lastIndexOf(const String &str, unsigned int fromIndex) const;
-    String substring(unsigned int beginIndex) const
-    {
-        return substring(beginIndex, len);
-    }
-    ;
-    String substring(unsigned int beginIndex, unsigned int endIndex) const;
+        // search
+        int indexOf(char ch) const;
+        int indexOf(char ch, unsigned int fromIndex) const;
+        int indexOf(const String &str) const;
+        int indexOf(const String &str, unsigned int fromIndex) const;
+        int lastIndexOf(char ch) const;
+        int lastIndexOf(char ch, unsigned int fromIndex) const;
+        int lastIndexOf(const String &str) const;
+        int lastIndexOf(const String &str, unsigned int fromIndex) const;
+        String substring(unsigned int beginIndex) const {
+            return substring(beginIndex, len());
+        }
+        ;
+        String substring(unsigned int beginIndex, unsigned int endIndex) const;
 
-    // modification
-    void replace(char find, char replace);
-    void replace(const String& find, const String& replace);
-    void remove(unsigned int index);
-    void remove(unsigned int index, unsigned int count);
-    void toLowerCase(void);
-    void toUpperCase(void);
-    void trim(void);
+        // modification
+        void replace(char find, char replace);
+        void replace(const String& find, const String& replace);
+        void remove(unsigned int index);
+        void remove(unsigned int index, unsigned int count);
+        void toLowerCase(void);
+        void toUpperCase(void);
+        void trim(void);
 
-    // parsing/conversion
-    long toInt(void) const;
-    float toFloat(void) const;
-    double toDouble(void) const;
+        // parsing/conversion
+        long toInt(void) const;
+        float toFloat(void) const;
+	double toDouble(void) const;
 
-protected:
-    char *buffer;	        // the actual char array
-    unsigned int capacity;  // the array length minus one (for the '\0')
-    unsigned int len;       // the String length (not counting the '\0')
-protected:
-    void init(void);
-    void invalidate(void);
-    unsigned char changeBuffer(unsigned int maxStrLen);
-    unsigned char concat(const char *cstr, unsigned int length);
+    protected:
+        // Contains the string info when we're not in SSO mode
+        struct _ptr { 
+            char *   buff;
+            uint16_t cap;
+            uint16_t len;
+        };
+        // This allows strings up up to 11 (10 + \0 termination) without any extra space.
+        enum { SSOSIZE = sizeof(struct _ptr) + 4 - 1 }; // Characters to allocate space for SSO, must be 12 or more
+        struct _sso {
+            char     buff[SSOSIZE];
+            unsigned char len   : 7; // Ensure only one byte is allocated by GCC for the bitfields
+            unsigned char isSSO : 1;
+        } __attribute__((packed)); // Ensure that GCC doesn't expand the flag byte to a 32-bit word for alignment issues
+        enum { CAPACITY_MAX = 65535 }; // If typeof(cap) changed from uint16_t, be sure to update this enum to the max value storable in the type
+        union {
+            struct _ptr ptr;
+            struct _sso sso;
+        };
+        // Accessor functions
+        inline bool isSSO() const { return sso.isSSO; }
+        inline unsigned int len() const { return isSSO() ? sso.len : ptr.len; }
+        inline unsigned int capacity() const { return isSSO() ? (unsigned int)SSOSIZE - 1 : ptr.cap; } // Size of max string not including terminal NUL
+        inline void setSSO(bool set) { sso.isSSO = set; }
+        inline void setLen(int len) { if (isSSO()) sso.len = len; else ptr.len = len; }
+        inline void setCapacity(int cap) { if (!isSSO()) ptr.cap = cap; }
+	inline void setBuffer(char *buff) { if (!isSSO()) ptr.buff = buff; }
+        // Buffer accessor functions
+        inline const char *buffer() const { return (const char *)(isSSO() ? sso.buff : ptr.buff); }
+        inline char *wbuffer() const { return isSSO() ? const_cast<char *>(sso.buff) : ptr.buff; } // Writable version of buffer
 
-    // copy and move
-    String & copy(const char *cstr, unsigned int length);
-    String & copy(const __FlashStringHelper *pstr, unsigned int length);
+    protected:
+        void init(void);
+        void invalidate(void);
+        unsigned char changeBuffer(unsigned int maxStrLen);
+        unsigned char concat(const char *cstr, unsigned int length);
+
+        // copy and move
+        String & copy(const char *cstr, unsigned int length);
+        String & copy(const __FlashStringHelper *pstr, unsigned int length);
 #ifdef __GXX_EXPERIMENTAL_CXX0X__
-    void move(String &rhs);
+        void move(String &rhs);
 #endif
 };
 
-class StringSumHelper: public String
-{
-public:
-    StringSumHelper(const String &s) :
-        String(s)
-    {
-    }
-    StringSumHelper(const char *p) :
-        String(p)
-    {
-    }
-    StringSumHelper(char c) :
-        String(c)
-    {
-    }
-    StringSumHelper(unsigned char num) :
-        String(num)
-    {
-    }
-    StringSumHelper(int num) :
-        String(num)
-    {
-    }
-    StringSumHelper(unsigned int num) :
-        String(num)
-    {
-    }
-    StringSumHelper(long num) :
-        String(num)
-    {
-    }
-    StringSumHelper(unsigned long num) :
-        String(num)
-    {
-    }
-    StringSumHelper(float num) :
-        String(num)
-    {
-    }
-    StringSumHelper(double num) :
-        String(num)
-    {
-    }
+class StringSumHelper: public String {
+    public:
+        StringSumHelper(const String &s) :
+                String(s) {
+        }
+        StringSumHelper(const char *p) :
+                String(p) {
+        }
+        StringSumHelper(char c) :
+                String(c) {
+        }
+        StringSumHelper(unsigned char num) :
+                String(num) {
+        }
+        StringSumHelper(int num) :
+                String(num) {
+        }
+        StringSumHelper(unsigned int num) :
+                String(num) {
+        }
+        StringSumHelper(long num) :
+                String(num) {
+        }
+        StringSumHelper(unsigned long num) :
+                String(num) {
+        }
+        StringSumHelper(float num) :
+                String(num) {
+        }
+        StringSumHelper(double num) :
+                String(num) {
+        }
 };
 
+extern const String emptyString;
+
 #endif  // __cplusplus
 #endif  // String_class_h

cores/esp32/esp32-hal-cpu.c

@@ -23,6 +23,7 @@
 #include "soc/rtc_cntl_reg.h"
 #include "rom/rtc.h"
 #include "soc/apb_ctrl_reg.h"
+#include "soc/efuse_reg.h"
 #include "esp32-hal.h"
 #include "esp32-hal-cpu.h"
 
@@ -150,6 +151,15 @@ bool setCpuFrequencyMhz(uint32_t cpu_freq_mhz){
         }
         return false;
     }
+    //check if cpu supports the frequency
+    if(cpu_freq_mhz == 240){
+        //Check if ESP32 is rated for a CPU frequency of 160MHz only
+        if (REG_GET_BIT(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_CPU_FREQ_RATED) &&
+            REG_GET_BIT(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_CPU_FREQ_LOW)) {
+            log_e("Can not switch to 240 MHz! Chip CPU frequency rated for 160MHz.");
+            cpu_freq_mhz = 160;
+        }
+    }
     //Get current CPU clock configuration
     rtc_clk_cpu_freq_get_config(&cconf);
     //return if frequency has not changed

cores/esp32/esp32-hal-i2c.c

@@ -1270,7 +1270,7 @@ i2c_err_t i2cProcQueue(i2c_t * i2c, uint32_t *readCount, uint16_t timeOutMillis)
 
     i2c->dev->ctr.trans_start=1; // go for it
 
-#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_ERROR
+#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
     portTickType tBefore=xTaskGetTickCount();
 #endif
     
@@ -1278,7 +1278,7 @@ i2c_err_t i2cProcQueue(i2c_t * i2c, uint32_t *readCount, uint16_t timeOutMillis)
     
     uint32_t eBits = xEventGroupWaitBits(i2c->i2c_event,EVENT_DONE,pdFALSE,pdTRUE,ticksTimeOut);
 
-#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_ERROR
+#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
     portTickType tAfter=xTaskGetTickCount();
 #endif
 

cores/esp32/esp32-hal-rmt.c

@@ -665,7 +665,6 @@ static void IRAM_ATTR _rmt_isr(void* arg)
         }
 
         if (intr_val & _INT_ERROR(ch)) {
-            digitalWrite(2, 1);
             // clear the flag
             RMT.int_clr.val = _INT_ERROR(ch);
             RMT.int_ena.val &= ~_INT_ERROR(ch);

cores/esp32/esp32-hal-uart.c

@@ -343,6 +343,8 @@ void uartFlush(uart_t* uart)
         READ_PERI_REG(UART_FIFO_REG(uart->num));
     }
 
+    xQueueReset(uart->queue);
+
     UART_MUTEX_UNLOCK();
 }
 

cores/esp32/pgmspace.h

@@ -32,7 +32,6 @@ typedef unsigned long prog_uint32_t;
 #define PROGMEM
 #define PGM_P         const char *
 #define PGM_VOID_P    const void *
-#define FPSTR(p)      ((const char *)(p))
 #define PSTR(s)       (s)
 #define _SFR_BYTE(n)  (n)
 

docs/arduino-ide/mac.md

@@ -23,5 +23,7 @@ Installation instructions for Mac OS
   
 - Try `python3` instead of `python` if you get the error: `IOError: [Errno socket error] [SSL: TLSV1_ALERT_PROTOCOL_VERSION] tlsv1 alert protocol version (_ssl.c:590)` when running `python get.py`
 
+- If you get the following error when running `python get.py` urllib.error.URLError: <urlopen error SSL: CERTIFICATE_VERIFY_FAILED, go to Macintosh HD > Applications > Python3.6 folder (or any other python version), and run the following scripts: Install Certificates.command and Update Shell Profile.command
+
 - Restart Arduino IDE
 

docs/platformio.md

@@ -1,11 +1,11 @@
 Installation instructions for using PlatformIO
 =================================================
 
-- [What is PlatformIO?](http://docs.platformio.org/en/latest/what-is-platformio.html?utm_source=github&utm_medium=arduino-esp32)
-- [PlatformIO IDE](http://platformio.org/platformio-ide?utm_source=github&utm_medium=arduino-esp32)
-- [PlatformIO Core](http://docs.platformio.org/en/latest/core.html?utm_source=github&utm_medium=arduino-esp32) (command line tool)
-- [Advanced usage](http://docs.platformio.org/en/latest/platforms/espressif32.html?utm_source=github&utm_medium=arduino-esp32) -
+- [What is PlatformIO?](https://docs.platformio.org/en/latest/what-is-platformio.html?utm_source=github&utm_medium=arduino-esp32)
+- [PlatformIO IDE](https://platformio.org/platformio-ide?utm_source=github&utm_medium=arduino-esp32)
+- [PlatformIO Core](https://docs.platformio.org/en/latest/core.html?utm_source=github&utm_medium=arduino-esp32) (command line tool)
+- [Advanced usage](https://docs.platformio.org/en/latest/platforms/espressif32.html?utm_source=github&utm_medium=arduino-esp32) -
   custom settings, uploading to SPIFFS, Over-the-Air (OTA), staging version
-- [Integration with Cloud and Standalone IDEs](http://docs.platformio.org/en/latest/ide.html?utm_source=github&utm_medium=arduino-esp32) -
+- [Integration with Cloud and Standalone IDEs](https://docs.platformio.org/en/latest/ide.html?utm_source=github&utm_medium=arduino-esp32) -
   Cloud9, Codeanywhere, Eclipse Che (Codenvy), Atom, CLion, Eclipse, Emacs, NetBeans, Qt Creator, Sublime Text, VIM, Visual Studio, and VSCode
-- [Project Examples](http://docs.platformio.org/en/latest/platforms/espressif32.html?utm_source=github&utm_medium=arduino-esp32#examples)
+- [Project Examples](https://docs.platformio.org/en/latest/platforms/espressif32.html?utm_source=github&utm_medium=arduino-esp32#examples)

libraries/AsyncUDP/library.json

@@ -1,17 +0,0 @@
-{
-  "name":"AsyncUDP",
-  "description":"Asynchronous UDP Library for ESP32",
-  "keywords":"async,udp,server,client,multicast,broadcast",
-  "authors":
-  {
-    "name": "Hristo Gochkov",
-    "maintainer": true
-  },
-  "repository":
-  {
-    "type": "git",
-    "url": "https://github.com/me-no-dev/ESPAsyncUDP.git"
-  },
-  "frameworks": "arduino",
-  "platforms":"espressif"
-}

libraries/AsyncUDP/src/AsyncUDP.cpp

@@ -682,8 +682,9 @@ void AsyncUDP::_recv(udp_pcb *upcb, pbuf *pb, const ip_addr_t *addr, uint16_t po
         if(_handler) {
             AsyncUDPPacket packet(this, this_pb, addr, port, netif);
             _handler(packet);
+        } else {
+            pbuf_free(this_pb);
         }
-        pbuf_free(this_pb);
     }
 }
 

libraries/BLE/src/BLEAddress.cpp

@@ -13,6 +13,7 @@
 #include <iomanip>
 #include <string.h>
 #include <stdio.h>
+#include <malloc.h>
 #ifdef ARDUINO_ARCH_ESP32
 #include "esp32-hal-log.h"
 #endif
@@ -83,13 +84,11 @@ esp_bd_addr_t *BLEAddress::getNative() {
  * @return The string representation of the address.
  */
 std::string BLEAddress::toString() {
-	std::stringstream stream;
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[0] << ':';
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[1] << ':';
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[2] << ':';
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[3] << ':';
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[4] << ':';
-	stream << std::setfill('0') << std::setw(2) << std::hex << (int) ((uint8_t*) (m_address))[5];
-	return stream.str();
+	auto size = 18;
+	char *res = (char*)malloc(size);
+	snprintf(res, size, "%02x:%02x:%02x:%02x:%02x:%02x", m_address[0], m_address[1], m_address[2], m_address[3], m_address[4], m_address[5]);
+	std::string ret(res);
+	free(res);
+	return ret;
 } // toString
 #endif

libraries/BLE/src/BLEAdvertisedDevice.cpp

@@ -484,23 +484,29 @@ void BLEAdvertisedDevice::setTXPower(int8_t txPower) {
  * @return A string representation of this device.
  */
 std::string BLEAdvertisedDevice::toString() {
-	std::stringstream ss;
-	ss << "Name: " << getName() << ", Address: " << getAddress().toString();
+	std::string res = "Name: " + getName() + ", Address: " + getAddress().toString();
 	if (haveAppearance()) {
-		ss << ", appearance: " << getAppearance();
+		char val[6];
+		snprintf(val, sizeof(val), "%d", getAppearance());
+		res += ", appearance: ";
+		res += val;
 	}
 	if (haveManufacturerData()) {
 		char *pHex = BLEUtils::buildHexData(nullptr, (uint8_t*)getManufacturerData().data(), getManufacturerData().length());
-		ss << ", manufacturer data: " << pHex;
+		res += ", manufacturer data: ";
+		res += pHex;
 		free(pHex);
 	}
 	if (haveServiceUUID()) {
-		ss << ", serviceUUID: " << getServiceUUID().toString();
+		res += ", serviceUUID: " + getServiceUUID().toString();
 	}
 	if (haveTXPower()) {
-		ss << ", txPower: " << (int)getTXPower();
+		char val[4];
+		snprintf(val, sizeof(val), "%d", getTXPower());
+		res += ", txPower: ";
+		res += val;
 	}
-	return ss.str();
+	return res;
 } // toString
 
 uint8_t* BLEAdvertisedDevice::getPayload() {

libraries/BLE/src/BLEAdvertising.cpp

@@ -253,6 +253,27 @@ void BLEAdvertising::stop() {
 	log_v("<< stop");
 } // stop
 
+/**
+ * @brief Set BLE address.
+ * @param [in] Bluetooth address.
+ * @param [in] Bluetooth address type.
+ * Set BLE address.
+ */
+
+void BLEAdvertising::setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type)
+{
+	log_v(">> setPrivateAddress");
+
+	m_advParams.own_addr_type = type;
+	esp_err_t errRc = esp_ble_gap_set_rand_addr((uint8_t*)addr);
+	if (errRc != ESP_OK)
+	{
+		log_e("esp_ble_gap_set_rand_addr: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
+		return;
+	}
+	log_v("<< setPrivateAddress");
+} // setPrivateAddress
+
 /**
  * @brief Add data to the payload to be advertised.
  * @param [in] data The data to be added to the payload.
@@ -484,7 +505,7 @@ void BLEAdvertising::handleGAPEvent(
 		}
 		case ESP_GAP_BLE_ADV_STOP_COMPLETE_EVT: {
 			log_i("STOP advertising");
-			start();
+			//start();
 			break;
 		}
 		default:

libraries/BLE/src/BLEAdvertising.h

@@ -58,6 +58,7 @@ public:
 	void setScanFilter(bool scanRequertWhitelistOnly, bool connectWhitelistOnly);
 	void setScanResponseData(BLEAdvertisementData& advertisementData);
 	void setPrivateAddress(esp_ble_addr_type_t type = BLE_ADDR_TYPE_RANDOM);
+	void setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type = BLE_ADDR_TYPE_RANDOM);
 
 	void handleGAPEvent(esp_gap_ble_cb_event_t  event, esp_ble_gap_cb_param_t* param);
 	void setMinPreferred(uint16_t);

libraries/BLE/src/BLECharacteristic.cpp

@@ -22,6 +22,7 @@
 
 #define NULL_HANDLE (0xffff)
 
+static BLECharacteristicCallbacks defaultCallback; //null-object-pattern
 
 /**
  * @brief Construct a characteristic
@@ -40,7 +41,7 @@ BLECharacteristic::BLECharacteristic(BLEUUID uuid, uint32_t properties) {
 	m_bleUUID    = uuid;
 	m_handle     = NULL_HANDLE;
 	m_properties = (esp_gatt_char_prop_t)0;
-	m_pCallbacks = nullptr;
+	m_pCallbacks = &defaultCallback;
 
 	setBroadcastProperty((properties & PROPERTY_BROADCAST) != 0);
 	setReadProperty((properties & PROPERTY_READ) != 0);
@@ -220,9 +221,7 @@ void BLECharacteristic::handleGATTServerEvent(
 		case ESP_GATTS_EXEC_WRITE_EVT: {
 			if (param->exec_write.exec_write_flag == ESP_GATT_PREP_WRITE_EXEC) {
 				m_value.commit();
-				if (m_pCallbacks != nullptr) {
-					m_pCallbacks->onWrite(this); // Invoke the onWrite callback handler.
-				}
+				m_pCallbacks->onWrite(this); // Invoke the onWrite callback handler.
 			} else {
 				m_value.cancel();
 			}
@@ -307,7 +306,7 @@ void BLECharacteristic::handleGATTServerEvent(
 					}
 				} // Response needed
 
-				if (m_pCallbacks != nullptr && param->write.is_prep != true) {
+				if (param->write.is_prep != true) {
 					m_pCallbacks->onWrite(this); // Invoke the onWrite callback handler.
 				}
 			} // Match on handles.
@@ -378,6 +377,10 @@ void BLECharacteristic::handleGATTServerEvent(
 						}
 					} else { // read.is_long == false
 
+						// If is.long is false then this is the first (or only) request to read data, so invoke the callback
+						// Invoke the read callback.
+						m_pCallbacks->onRead(this);
+
 						std::string value = m_value.getValue();
 
 						if (value.length() + 1 > maxOffset) {
@@ -392,10 +395,6 @@ void BLECharacteristic::handleGATTServerEvent(
 							rsp.attr_value.offset = 0;
 							memcpy(rsp.attr_value.value, value.data(), rsp.attr_value.len);
 						}
-
-						if (m_pCallbacks != nullptr) {  // If is.long is false then this is the first (or only) request to read data, so invoke the callback
-							m_pCallbacks->onRead(this);   // Invoke the read callback.
-						}
 					}
 					rsp.attr_value.handle   = param->read.handle;
 					rsp.attr_value.auth_req = ESP_GATT_AUTH_REQ_NONE;
@@ -480,10 +479,13 @@ void BLECharacteristic::notify(bool is_notification) {
 	assert(getService() != nullptr);
 	assert(getService()->getServer() != nullptr);
 
+	m_pCallbacks->onNotify(this);   // Invoke the notify callback.
+
 	GeneralUtils::hexDump((uint8_t*)m_value.getValue().data(), m_value.getValue().length());
 
 	if (getService()->getServer()->getConnectedCount() == 0) {
 		log_v("<< notify: No connected clients.");
+		m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_NO_CLIENT, 0);
 		return;
 	}
 
@@ -494,12 +496,14 @@ void BLECharacteristic::notify(bool is_notification) {
 	if(is_notification) {
 		if (p2902 != nullptr && !p2902->getNotifications()) {
 			log_v("<< notifications disabled; ignoring");
+			m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_NOTIFY_DISABLED, 0);   // Invoke the notify callback.
 			return;
 		}
 	}
 	else{
 		if (p2902 != nullptr && !p2902->getIndications()) {
 			log_v("<< indications disabled; ignoring");
+			m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_INDICATE_DISABLED, 0);   // Invoke the notify callback.
 			return;
 		}
 	}
@@ -510,7 +514,7 @@ void BLECharacteristic::notify(bool is_notification) {
 		}
 
 		size_t length = m_value.getValue().length();
-		if(!is_notification)
+		if(!is_notification) // is indication
 			m_semaphoreConfEvt.take("indicate");
 		esp_err_t errRc = ::esp_ble_gatts_send_indicate(
 				getService()->getServer()->getGattsIf(),
@@ -519,10 +523,23 @@ void BLECharacteristic::notify(bool is_notification) {
 		if (errRc != ESP_OK) {
 			log_e("<< esp_ble_gatts_send_ %s: rc=%d %s",is_notification?"notify":"indicate", errRc, GeneralUtils::errorToString(errRc));
 			m_semaphoreConfEvt.give();
+			m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_GATT, errRc);   // Invoke the notify callback.
 			return;
 		}
-		if(!is_notification)
-			m_semaphoreConfEvt.wait("indicate");
+		if(!is_notification){ // is indication
+			if(!m_semaphoreConfEvt.timedWait("indicate", indicationTimeout)){
+				m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_INDICATE_TIMEOUT, 0);   // Invoke the notify callback.
+			} else {
+				auto code = (esp_gatt_status_t) m_semaphoreConfEvt.value();
+				if(code == ESP_GATT_OK) {
+					m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::SUCCESS_INDICATE, code);   // Invoke the notify callback.
+				} else {
+					m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::ERROR_INDICATE_FAILURE, code);
+				}
+			}
+		} else {
+			m_pCallbacks->onStatus(this, BLECharacteristicCallbacks::Status::SUCCESS_NOTIFY, 0);   // Invoke the notify callback.
+		}
 	}
 	log_v("<< notify");
 } // Notify
@@ -551,7 +568,11 @@ void BLECharacteristic::setBroadcastProperty(bool value) {
  */
 void BLECharacteristic::setCallbacks(BLECharacteristicCallbacks* pCallbacks) {
 	log_v(">> setCallbacks: 0x%x", (uint32_t)pCallbacks);
-	m_pCallbacks = pCallbacks;
+	if (pCallbacks != nullptr){
+		m_pCallbacks = pCallbacks;
+	} else {
+		m_pCallbacks = &defaultCallback;
+	}
 	log_v("<< setCallbacks");
 } // setCallbacks
 
@@ -628,7 +649,9 @@ void BLECharacteristic::setValue(uint8_t* data, size_t length) {
 		log_e("Size %d too large, must be no bigger than %d", length, ESP_GATT_MAX_ATTR_LEN);
 		return;
 	}
+	m_semaphoreSetValue.take();  
 	m_value.setValue(data, length);
+	m_semaphoreSetValue.give();  
 	log_v("<< setValue");
 } // setValue
 
@@ -715,17 +738,18 @@ void BLECharacteristic::setWriteProperty(bool value) {
  * @return A string representation of the characteristic.
  */
 std::string BLECharacteristic::toString() {
-	std::stringstream stringstream;
-	stringstream << std::hex << std::setfill('0');
-	stringstream << "UUID: " << m_bleUUID.toString() + ", handle: 0x" << std::setw(2) << m_handle;
-	stringstream << " " <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_READ) ? "Read " : "") <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_WRITE) ? "Write " : "") <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_WRITE_NR) ? "WriteNoResponse " : "") <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_BROADCAST) ? "Broadcast " : "") <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_NOTIFY) ? "Notify " : "") <<
-		((m_properties & ESP_GATT_CHAR_PROP_BIT_INDICATE) ? "Indicate " : "");
-	return stringstream.str();
+	std::string res = "UUID: " + m_bleUUID.toString() + ", handle : 0x";
+	char hex[5];
+	snprintf(hex, sizeof(hex), "%04x", m_handle);
+	res += hex;
+	res += " ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_READ) res += "Read ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_WRITE) res += "Write ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_WRITE_NR) res += "WriteNoResponse ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_BROADCAST) res += "Broadcast ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_NOTIFY) res += "Notify ";
+	if (m_properties & ESP_GATT_CHAR_PROP_BIT_INDICATE) res += "Indicate ";
+	return res;
 } // toString
 
 
@@ -751,4 +775,27 @@ void BLECharacteristicCallbacks::onWrite(BLECharacteristic* pCharacteristic) {
 	log_d("BLECharacteristicCallbacks", "<< onWrite");
 } // onWrite
 
+
+/**
+ * @brief Callback function to support a Notify request.
+ * @param [in] pCharacteristic The characteristic that is the source of the event.
+ */
+void BLECharacteristicCallbacks::onNotify(BLECharacteristic* pCharacteristic) {
+	log_d("BLECharacteristicCallbacks", ">> onNotify: default");
+	log_d("BLECharacteristicCallbacks", "<< onNotify");
+} // onNotify
+
+
+/**
+ * @brief Callback function to support a Notify/Indicate Status report.
+ * @param [in] pCharacteristic The characteristic that is the source of the event.
+ * @param [in] s Status of the notification/indication
+ * @param [in] code Additional code of underlying errors
+ */
+void BLECharacteristicCallbacks::onStatus(BLECharacteristic* pCharacteristic, Status s, uint32_t code) {
+	log_d("BLECharacteristicCallbacks", ">> onStatus: default");
+	log_d("BLECharacteristicCallbacks", "<< onStatus");
+} // onStatus
+
+
 #endif /* CONFIG_BT_ENABLED */

libraries/BLE/src/BLECharacteristic.h

@@ -90,6 +90,8 @@ public:
 	static const uint32_t PROPERTY_INDICATE  = 1<<4;
 	static const uint32_t PROPERTY_WRITE_NR  = 1<<5;
 
+	static const uint32_t indicationTimeout = 1000;
+
 private:
 
 	friend class BLEServer;
@@ -117,6 +119,7 @@ private:
 	void                 setHandle(uint16_t handle);
 	FreeRTOS::Semaphore m_semaphoreCreateEvt = FreeRTOS::Semaphore("CreateEvt");
 	FreeRTOS::Semaphore m_semaphoreConfEvt   = FreeRTOS::Semaphore("ConfEvt");
+	FreeRTOS::Semaphore m_semaphoreSetValue  = FreeRTOS::Semaphore("SetValue");  
 }; // BLECharacteristic
 
 
@@ -129,9 +132,22 @@ private:
  */
 class BLECharacteristicCallbacks {
 public:
+	typedef enum {
+		SUCCESS_INDICATE,
+		SUCCESS_NOTIFY,
+		ERROR_INDICATE_DISABLED,
+		ERROR_NOTIFY_DISABLED,
+		ERROR_GATT,
+		ERROR_NO_CLIENT,
+		ERROR_INDICATE_TIMEOUT,
+		ERROR_INDICATE_FAILURE
+	}Status;
+
 	virtual ~BLECharacteristicCallbacks();
 	virtual void onRead(BLECharacteristic* pCharacteristic);
 	virtual void onWrite(BLECharacteristic* pCharacteristic);
+	virtual void onNotify(BLECharacteristic* pCharacteristic);
+	virtual void onStatus(BLECharacteristic* pCharacteristic, Status s, uint32_t code);
 };
 #endif /* CONFIG_BT_ENABLED */
 #endif /* COMPONENTS_CPP_UTILS_BLECHARACTERISTIC_H_ */

libraries/BLE/src/BLECharacteristicMap.cpp

@@ -116,17 +116,18 @@ void BLECharacteristicMap::setByUUID(BLECharacteristic* pCharacteristic, BLEUUID
  * @return A string representation of the characteristic map.
  */
 std::string BLECharacteristicMap::toString() {
-	std::stringstream stringStream;
-	stringStream << std::hex << std::setfill('0');
+	std::string res;
 	int count = 0;
+	char hex[5];
 	for (auto &myPair: m_uuidMap) {
-		if (count > 0) {
-			stringStream << "\n";
-		}
+		if (count > 0) {res += "\n";}
+		snprintf(hex, sizeof(hex), "%04x", myPair.first->getHandle());
 		count++;
-		stringStream << "handle: 0x" << std::setw(2) << myPair.first->getHandle() << ", uuid: " + myPair.first->getUUID().toString();
+		res += "handle: 0x";
+		res += hex;
+		res += ", uuid: " + myPair.first->getUUID().toString();
 	}
-	return stringStream.str();
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEClient.cpp

@@ -184,10 +184,11 @@ void BLEClient::gattClientEventHandler(
 				if (m_pClientCallbacks != nullptr) {
 					m_pClientCallbacks->onDisconnect(this);
 				}
-				BLEDevice::removePeerDevice(m_appId, true);
 				esp_ble_gattc_app_unregister(m_gattc_if);
+				m_semaphoreOpenEvt.give(ESP_GATT_IF_NONE);
 				m_semaphoreRssiCmplEvt.give();
 				m_semaphoreSearchCmplEvt.give(1);
+				BLEDevice::removePeerDevice(m_appId, true);
 				break;
 		} // ESP_GATTC_DISCONNECT_EVT
 
@@ -515,14 +516,13 @@ uint16_t BLEClient::getMTU() {
  * @return A string representation of this client.
  */
 std::string BLEClient::toString() {
-	std::ostringstream ss;
-	ss << "peer address: " << m_peerAddress.toString();
-	ss << "\nServices:\n";
+	std::string res = "peer address: " + m_peerAddress.toString();
+	res += "\nServices:\n";
 	for (auto &myPair : m_servicesMap) {
-		ss << myPair.second->toString() << "\n";
+		res += myPair.second->toString() + "\n";
 	  // myPair.second is the value
 	}
-	return ss.str();
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEClient.h

@@ -15,7 +15,7 @@
 #include <string.h>
 #include <map>
 #include <string>
-#include "BLEExceptions.h"
+//#include "BLEExceptions.h"
 #include "BLERemoteService.h"
 #include "BLEService.h"
 #include "BLEAddress.h"

libraries/BLE/src/BLEDescriptor.cpp

@@ -255,10 +255,10 @@ void BLEDescriptor::setAccessPermissions(esp_gatt_perm_t perm) {
  * @return A string representation of the descriptor.
  */
 std::string BLEDescriptor::toString() {
-	std::stringstream stringstream;
-	stringstream << std::hex << std::setfill('0');
-	stringstream << "UUID: " << m_bleUUID.toString() + ", handle: 0x" << std::setw(2) << m_handle;
-	return stringstream.str();
+	char hex[5];
+	snprintf(hex, sizeof(hex), "%04x", m_handle);
+	std::string res = "UUID: " + m_bleUUID.toString() + ", handle: 0x" + hex;
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEDescriptorMap.cpp

@@ -90,17 +90,18 @@ void BLEDescriptorMap::setByHandle(uint16_t handle, BLEDescriptor* pDescriptor)
  * @return A string representation of the descriptor map.
  */
 std::string BLEDescriptorMap::toString() {
-	std::stringstream stringStream;
-	stringStream << std::hex << std::setfill('0');
+	std::string res;
+	char hex[5];
 	int count = 0;
 	for (auto &myPair : m_uuidMap) {
-		if (count > 0) {
-			stringStream << "\n";
-		}
+		if (count > 0) {res += "\n";}
+		snprintf(hex, sizeof(hex), "%04x", myPair.first->getHandle());
 		count++;
-		stringStream << "handle: 0x" << std::setw(2) << myPair.first->getHandle() << ", uuid: " + myPair.first->getUUID().toString();
+		res += "handle: 0x";
+		res += hex;
+		res += ", uuid: " + myPair.first->getUUID().toString();
 	}
-	return stringStream.str();
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEDevice.cpp

@@ -479,9 +479,8 @@ gatts_event_handler BLEDevice::m_customGattsHandler = nullptr;
  * @return A string representation of the nature of this device.
  */
 /* STATIC */ std::string BLEDevice::toString() {
-	std::ostringstream oss;
-	oss << "BD Address: " << getAddress().toString();
-	return oss.str();
+	std::string res = "BD Address: " + getAddress().toString();
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEEddystoneTLM.cpp

@@ -7,7 +7,7 @@
 #include "sdkconfig.h"
 #if defined(CONFIG_BT_ENABLED)
 #include <string.h>
-#include <sstream>
+#include <stdio.h>
 #include "esp32-hal-log.h"
 #include "BLEEddystoneTLM.h"
 
@@ -54,62 +54,44 @@ uint32_t BLEEddystoneTLM::getTime() {
 } // getTime
 
 std::string BLEEddystoneTLM::toString() {
-	std::stringstream ss;
-	std::string out = "";
-  uint32_t rawsec;
-  ss << "Version ";
-  ss << std::dec << m_eddystoneData.version;
-  ss << "\n";
+  std::string out = "";
+  uint32_t rawsec = ENDIAN_CHANGE_U32(m_eddystoneData.tmil);
+  char val[6];
 
-  ss << "Battery Voltage ";
-  ss << std::dec << ENDIAN_CHANGE_U16(m_eddystoneData.volt);
-  ss << " mV\n";
+  out += "Version " + m_eddystoneData.version;
+  out += "\n";
+  out += "Battery Voltage " + ENDIAN_CHANGE_U16(m_eddystoneData.volt);
+  out += " mV\n";
 
-  ss << "Temperature ";
-  ss << (float) m_eddystoneData.temp;
-  ss << " °C\n";
+  out += "Temperature ";
+  snprintf(val, sizeof(val), "%d", m_eddystoneData.temp);
+  out += val;
+  out += ".0 °C\n";
 
-  ss << "Adv. Count ";
-  ss << std::dec << ENDIAN_CHANGE_U32(m_eddystoneData.advCount);
+  out += "Adv. Count ";
+  snprintf(val, sizeof(val), "%d", ENDIAN_CHANGE_U32(m_eddystoneData.advCount));
+  out += val;
+  out += "\n";
 
-  ss << "\n";
+  out += "Time ";
 
-  ss << "Time ";
+  snprintf(val, sizeof(val), "%04d", rawsec / 864000);
+  out += val;
+  out += ".";
 
-  rawsec = ENDIAN_CHANGE_U32(m_eddystoneData.tmil);
-  std::stringstream buffstream;
-  buffstream << "0000";
-  buffstream << std::dec << rawsec / 864000;
-  std::string buff = buffstream.str();
+  snprintf(val, sizeof(val), "%02d", (rawsec / 36000) % 24);
+  out += val;
+  out += ":";
 
-  ss << buff.substr(buff.length() - 4, buff.length());
-  ss << ".";
+  snprintf(val, sizeof(val), "%02d", (rawsec / 600) % 60);
+  out += val;
+  out += ":";
 
-  buffstream.str("");
-  buffstream.clear();
-  buffstream << "00";
-  buffstream << std::dec << (rawsec / 36000) % 24;
-  buff = buffstream.str();
-  ss << buff.substr(buff.length()-2, buff.length());
-  ss << ":";
+  snprintf(val, sizeof(val), "%02d", (rawsec / 10) % 60);
+  out += val;
+  out += "\n";
 
-  buffstream.str("");
-  buffstream.clear();
-  buffstream << "00";
-  buffstream << std::dec << (rawsec / 600) % 60;
-  buff = buffstream.str();
-  ss << buff.substr(buff.length() - 2, buff.length());
-  ss << ":";
-
-  buffstream.str("");
-  buffstream.clear();
-  buffstream << "00";
-  buffstream << std::dec << (rawsec / 10) % 60;
-  buff = buffstream.str();
-  ss << buff.substr(buff.length() - 2, buff.length());
-  ss << "\n";
-
-  return ss.str();
+  return out;
 } // toString
 
 /**

libraries/BLE/src/BLEExceptions.cpp

@@ -5,5 +5,5 @@
  *      Author: kolban
  */
 
-#include "BLEExceptions.h"
+//#include "BLEExceptions.h"
 

libraries/BLE/src/BLERemoteCharacteristic.cpp

@@ -14,7 +14,7 @@
 #include <esp_err.h>
 
 #include <sstream>
-#include "BLEExceptions.h"
+//#include "BLEExceptions.h"
 #include "BLEUtils.h"
 #include "GeneralUtils.h"
 #include "BLERemoteDescriptor.h"
@@ -39,6 +39,7 @@ BLERemoteCharacteristic::BLERemoteCharacteristic(
 	m_charProp       = charProp;
 	m_pRemoteService = pRemoteService;
 	m_notifyCallback = nullptr;
+	m_rawData = nullptr;
 
 	retrieveDescriptors(); // Get the descriptors for this characteristic
 	log_v("<< BLERemoteCharacteristic");
@@ -399,7 +400,7 @@ std::string BLERemoteCharacteristic::readValue() {
 	// Check to see that we are connected.
 	if (!getRemoteService()->getClient()->isConnected()) {
 		log_e("Disconnected");
-		throw BLEDisconnectedException();
+		return std::string();
 	}
 
 	m_semaphoreReadCharEvt.take("readValue");
@@ -500,11 +501,16 @@ void BLERemoteCharacteristic::removeDescriptors() {
  * @return a String representation.
  */
 std::string BLERemoteCharacteristic::toString() {
-	std::ostringstream ss;
-	ss << "Characteristic: uuid: " << m_uuid.toString() <<
-		", handle: " << getHandle() << " 0x" << std::hex << getHandle() <<
-		", props: " << BLEUtils::characteristicPropertiesToString(m_charProp);
-	return ss.str();
+	std::string res = "Characteristic: uuid: " + m_uuid.toString();
+	char val[6];
+	res += ", handle: ";
+	snprintf(val, sizeof(val), "%d", getHandle());
+	res += val;
+	res += " 0x";
+	snprintf(val, sizeof(val), "%04x", getHandle());
+	res += val;
+	res += ", props: " + BLEUtils::characteristicPropertiesToString(m_charProp);
+	return res;
 } // toString
 
 
@@ -545,7 +551,7 @@ void BLERemoteCharacteristic::writeValue(uint8_t* data, size_t length, bool resp
 	// Check to see that we are connected.
 	if (!getRemoteService()->getClient()->isConnected()) {
 		log_e("Disconnected");
-		throw BLEDisconnectedException();
+		return;
 	}
 
 	m_semaphoreWriteCharEvt.take("writeValue");

libraries/BLE/src/BLERemoteDescriptor.cpp

@@ -55,7 +55,7 @@ std::string BLERemoteDescriptor::readValue() {
 	// Check to see that we are connected.
 	if (!getRemoteCharacteristic()->getRemoteService()->getClient()->isConnected()) {
 		log_e("Disconnected");
-		throw BLEDisconnectedException();
+		return std::string();
 	}
 
 	m_semaphoreReadDescrEvt.take("readValue");
@@ -113,9 +113,12 @@ uint32_t BLERemoteDescriptor::readUInt32() {
  * @retun A string representation of this BLE Remote Descriptor.
  */
 std::string BLERemoteDescriptor::toString() {
-	std::stringstream ss;
-	ss << "handle: " << getHandle() << ", uuid: " << getUUID().toString();
-	return ss.str();
+	char val[6];
+	snprintf(val, sizeof(val), "%d", getHandle());
+	std::string res = "handle: ";
+	res += val;
+	res += ", uuid: " + getUUID().toString();
+	return res;
 } // toString
 
 
@@ -130,7 +133,7 @@ void BLERemoteDescriptor::writeValue(uint8_t* data, size_t length, bool response
 	// Check to see that we are connected.
 	if (!getRemoteCharacteristic()->getRemoteService()->getClient()->isConnected()) {
 		log_e("Disconnected");
-		throw BLEDisconnectedException();
+		return;
 	}
 
 	esp_err_t errRc = ::esp_ble_gattc_write_char_descr(

libraries/BLE/src/BLERemoteService.cpp

@@ -14,6 +14,8 @@
 #include <esp_err.h>
 #include "esp32-hal-log.h"
 
+#pragma GCC diagnostic warning "-Wunused-but-set-parameter"
+
 BLERemoteService::BLERemoteService(
 		esp_gatt_id_t srvcId,
 		BLEClient*    pClient,
@@ -164,7 +166,7 @@ void BLERemoteService::retrieveCharacteristics() {
 	uint16_t offset = 0;
 	esp_gattc_char_elem_t result;
 	while (true) {
-		uint16_t count = 10;  // this value is used as in parameter that allows to search max 10 chars with the same uuid
+		uint16_t count = 1; // only room for 1 result allocated, so go one by one
 		esp_gatt_status_t status = ::esp_ble_gattc_get_all_char(
 			getClient()->getGattcIf(),
 			getClient()->getConnId(),
@@ -228,7 +230,6 @@ std::map<std::string, BLERemoteCharacteristic*>* BLERemoteService::getCharacteri
  * @brief This function is designed to get characteristics map when we have multiple characteristics with the same UUID
  */
 void BLERemoteService::getCharacteristics(std::map<uint16_t, BLERemoteCharacteristic*>* pCharacteristicMap) {
-#pragma GCC diagnostic ignored "-Wunused-but-set-parameter"
 	pCharacteristicMap = &m_characteristicMapByHandle;
 }  // Get the characteristics map.
 
@@ -317,15 +318,25 @@ void BLERemoteService::setValue(BLEUUID characteristicUuid, std::string value) {
  * @return A string representation of this remote service.
  */
 std::string BLERemoteService::toString() {
-	std::ostringstream ss;
-	ss << "Service: uuid: " + m_uuid.toString();
-	ss << ", start_handle: " << std::dec << m_startHandle << " 0x" << std::hex << m_startHandle <<
-			", end_handle: " << std::dec << m_endHandle << " 0x" << std::hex << m_endHandle;
+	std::string res = "Service: uuid: " + m_uuid.toString();
+	char val[6];
+	res += ", start_handle: ";
+	snprintf(val, sizeof(val), "%d", m_startHandle);
+	res += val;
+	snprintf(val, sizeof(val), "%04x", m_startHandle);
+	res += " 0x";
+	res += val;
+	res += ", end_handle: ";
+	snprintf(val, sizeof(val), "%d", m_endHandle);
+	res += val;
+	snprintf(val, sizeof(val), "%04x", m_endHandle);
+	res += " 0x";
+	res += val;
 	for (auto &myPair : m_characteristicMap) {
-		ss << "\n" << myPair.second->toString();
+		res += "\n" + myPair.second->toString();
 	   // myPair.second is the value
 	}
-	return ss.str();
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEServer.cpp

@@ -412,4 +412,9 @@ void BLEServer::updateConnParams(esp_bd_addr_t remote_bda, uint16_t minInterval,
 	conn_params.timeout = timeout;    // timeout = 400*10ms = 4000ms
 	esp_ble_gap_update_conn_params(&conn_params); 
 }
+
+void BLEServer::disconnect(uint16_t connId) {
+	esp_ble_gatts_close(m_gatts_if, connId);
+}
+
 #endif // CONFIG_BT_ENABLED

libraries/BLE/src/BLEServer.h

@@ -72,6 +72,7 @@ public:
 	BLEService* 	getServiceByUUID(const char* uuid);
 	BLEService* 	getServiceByUUID(BLEUUID uuid);
 	bool 			connect(BLEAddress address);
+	void 			disconnect(uint16_t connId);
 	uint16_t		m_appId;
 	void			updateConnParams(esp_bd_addr_t remote_bda, uint16_t minInterval, uint16_t maxInterval, uint16_t latency, uint16_t timeout);
 

libraries/BLE/src/BLEService.cpp

@@ -381,10 +381,12 @@ BLECharacteristic* BLEService::getCharacteristic(BLEUUID uuid) {
  * @return A string representation of this service.
  */
 std::string BLEService::toString() {
-	std::stringstream stringStream;
-	stringStream << "UUID: " << getUUID().toString() <<
-		", handle: 0x" << std::hex << std::setfill('0') << std::setw(2) << getHandle();
-	return stringStream.str();
+	std::string res = "UUID: " + getUUID().toString();
+	char hex[5];
+	snprintf(hex, sizeof(hex), "%04x", getHandle());
+	res += ", handle: 0x";
+	res += hex;
+	return res;
 } // toString
 
 

libraries/BLE/src/BLEServiceMap.cpp

@@ -6,7 +6,7 @@
  */
 #include "sdkconfig.h"
 #if defined(CONFIG_BT_ENABLED)
-#include <sstream>
+#include <stdio.h>
 #include <iomanip>
 #include "BLEService.h"
 
@@ -73,12 +73,15 @@ void BLEServiceMap::setByHandle(uint16_t handle, BLEService* service) {
  * @return A string representation of the service map.
  */
 std::string BLEServiceMap::toString() {
-	std::stringstream stringStream;
-	stringStream << std::hex << std::setfill('0');
+	std::string res;
+	char hex[5];
 	for (auto &myPair: m_handleMap) {
-		stringStream << "handle: 0x" << std::setw(2) << myPair.first << ", uuid: " + myPair.second->getUUID().toString() << "\n";
+		res += "handle: 0x";
+		snprintf(hex, sizeof(hex), "%04x", myPair.first);
+		res += hex;
+		res += ", uuid: " + myPair.second->getUUID().toString() + "\n";
 	}
-	return stringStream.str();
+	return res;
 } // toString
 
 void BLEServiceMap::handleGATTServerEvent(

libraries/BLE/src/BLEUUID.cpp

@@ -349,51 +349,38 @@ BLEUUID BLEUUID::to128() {
  */
 std::string BLEUUID::toString() {
 	if (!m_valueSet) return "<NULL>";   // If we have no value, nothing to format.
-
 	// If the UUIDs are 16 or 32 bit, pad correctly.
-	std::stringstream ss;
 
 	if (m_uuid.len == ESP_UUID_LEN_16) {  // If the UUID is 16bit, pad correctly.
-		ss << "0000" <<
-			std::hex <<
-			std::setfill('0') <<
-			std::setw(4) <<
-			m_uuid.uuid.uuid16 <<
-			"-0000-1000-8000-00805f9b34fb";
-		return ss.str();                    // Return the string
+		char hex[5];
+		snprintf(hex, sizeof(hex), "%04x", m_uuid.uuid.uuid16);
+		return std::string(hex) + "-0000-1000-8000-00805f9b34fb";
 	} // End 16bit UUID
 
 	if (m_uuid.len == ESP_UUID_LEN_32) {  // If the UUID is 32bit, pad correctly.
-		ss << std::hex <<
-			std::setfill('0') <<
-			std::setw(8) <<
-			m_uuid.uuid.uuid32 <<
-			"-0000-1000-8000-00805f9b34fb";
-		return ss.str();                    // return the string
+		char hex[9];
+		snprintf(hex, sizeof(hex), "%08x", m_uuid.uuid.uuid32);
+		return std::string(hex) + "-0000-1000-8000-00805f9b34fb";
 	} // End 32bit UUID
 
 	// The UUID is not 16bit or 32bit which means that it is 128bit.
 	//
 	// UUID string format:
 	// AABBCCDD-EEFF-GGHH-IIJJ-KKLLMMNNOOPP
-	ss << std::hex << std::setfill('0') <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[15] <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[14] <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[13] <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[12] << "-" <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[11] <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[10] << "-" <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[9]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[8]  << "-" <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[7]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[6]  << "-" <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[5]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[4]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[3]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[2]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[1]  <<
-		std::setw(2) << (int) m_uuid.uuid.uuid128[0];
-	return ss.str();
+	auto size = 35;
+	char *hex = (char *)malloc(size);
+	snprintf(hex, size, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x",
+			m_uuid.uuid.uuid128[15], m_uuid.uuid.uuid128[14],
+			m_uuid.uuid.uuid128[13], m_uuid.uuid.uuid128[12],
+			m_uuid.uuid.uuid128[11], m_uuid.uuid.uuid128[10],
+			m_uuid.uuid.uuid128[9], m_uuid.uuid.uuid128[8],
+			m_uuid.uuid.uuid128[7], m_uuid.uuid.uuid128[6],
+			m_uuid.uuid.uuid128[5], m_uuid.uuid.uuid128[4],
+			m_uuid.uuid.uuid128[3], m_uuid.uuid.uuid128[2],
+			m_uuid.uuid.uuid128[1], m_uuid.uuid.uuid128[0]);
+	std::string res(hex);
+	free(hex);
+	return res;
 } // toString
 
 #endif /* CONFIG_BT_ENABLED */

libraries/BLE/src/BLEUtils.cpp

@@ -604,26 +604,32 @@ static const gattService_t g_gattServices[] = {
  * @return A string representation of characteristic properties.
  */
 std::string BLEUtils::characteristicPropertiesToString(esp_gatt_char_prop_t prop) {
-	std::stringstream stream;
-	stream <<
-			"broadcast: "  << ((prop & ESP_GATT_CHAR_PROP_BIT_BROADCAST)?"1":"0") <<
-			", read: "     << ((prop & ESP_GATT_CHAR_PROP_BIT_READ)?"1":"0") <<
-			", write_nr: " << ((prop & ESP_GATT_CHAR_PROP_BIT_WRITE_NR)?"1":"0") <<
-			", write: "    << ((prop & ESP_GATT_CHAR_PROP_BIT_WRITE)?"1":"0") <<
-			", notify: "   << ((prop & ESP_GATT_CHAR_PROP_BIT_NOTIFY)?"1":"0") <<
-			", indicate: " << ((prop & ESP_GATT_CHAR_PROP_BIT_INDICATE)?"1":"0") <<
-			", auth: "     << ((prop & ESP_GATT_CHAR_PROP_BIT_AUTH)?"1":"0");
-	return stream.str();
+	std::string res = "broadcast: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_BROADCAST)?"1":"0");
+	res += ", read: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_READ)?"1":"0");
+	res += ", write_nr: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_WRITE_NR)?"1":"0");
+	res += ", write: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_WRITE)?"1":"0");
+	res += ", notify: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_NOTIFY)?"1":"0");
+	res += ", indicate: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_INDICATE)?"1":"0");
+	res += ", auth: ";
+	res += ((prop & ESP_GATT_CHAR_PROP_BIT_AUTH)?"1":"0");
+	return res;
 } // characteristicPropertiesToString
 
 /**
  * @brief Convert an esp_gatt_id_t to a string.
  */
 static std::string gattIdToString(esp_gatt_id_t gattId) {
-	std::stringstream stream;
-	stream << "uuid: " << BLEUUID(gattId.uuid).toString() << ", inst_id: " << (int)gattId.inst_id;
-	//sprintf(buffer, "uuid: %s, inst_id: %d", uuidToString(gattId.uuid).c_str(), gattId.inst_id);
-	return stream.str();
+	std::string res = "uuid: " + BLEUUID(gattId.uuid).toString() + ", inst_id: ";
+	char val[8];
+	snprintf(val, sizeof(val), "%d", (int)gattId.inst_id);
+	res += val;
+	return res;
 } // gattIdToString
 
 
@@ -654,23 +660,23 @@ const char* BLEUtils::addressTypeToString(esp_ble_addr_type_t type) {
  * @return std::string A string representation of the advertising flags.
  */
 std::string BLEUtils::adFlagsToString(uint8_t adFlags) {
-	std::stringstream ss;
+	std::string res;
 	if (adFlags & (1 << 0)) {
-		ss << "[LE Limited Discoverable Mode] ";
+		res += "[LE Limited Discoverable Mode] ";
 	}
 	if (adFlags & (1 << 1)) {
-		ss << "[LE General Discoverable Mode] ";
+		res += "[LE General Discoverable Mode] ";
 	}
 	if (adFlags & (1 << 2)) {
-		ss << "[BR/EDR Not Supported] ";
+		res += "[BR/EDR Not Supported] ";
 	}
 	if (adFlags & (1 << 3)) {
-		ss << "[Simultaneous LE and BR/EDR to Same Device Capable (Controller)] ";
+		res += "[Simultaneous LE and BR/EDR to Same Device Capable (Controller)] ";
 	}
 	if (adFlags & (1 << 4)) {
-		ss << "[Simultaneous LE and BR/EDR to Same Device Capable (Host)] ";
+		res += "[Simultaneous LE and BR/EDR to Same Device Capable (Host)] ";
 	}
-	return ss.str();
+	return res;
 } // adFlagsToString
 
 
@@ -802,13 +808,13 @@ char* BLEUtils::buildHexData(uint8_t* target, uint8_t* source, uint8_t length) {
  * @return A string representation of a piece of memory.
  */
 std::string BLEUtils::buildPrintData(uint8_t* source, size_t length) {
-	std::ostringstream ss;
+	std::string res;
 	for (int i = 0; i < length; i++) {
 		char c = *source;
-		ss << (isprint(c) ? c : '.');
+		res += (isprint(c) ? c : '.');
 		source++;
 	}
-	return ss.str();
+	return res;
 } // buildPrintData
 
 
@@ -1848,14 +1854,22 @@ std::string BLEUtils::gattDescriptorUUIDToString(uint32_t descriptorUUID) {
  * @return A string representation of an esp_gattc_service_elem_t.
  */
 std::string BLEUtils::gattcServiceElementToString(esp_gattc_service_elem_t* pGATTCServiceElement) {
-	std::stringstream ss;
-
-	ss << "[uuid: " << BLEUUID(pGATTCServiceElement->uuid).toString() <<
-		", start_handle: " << pGATTCServiceElement->start_handle <<
-			" 0x" << std::hex << pGATTCServiceElement->start_handle <<
-		", end_handle: " << std::dec << pGATTCServiceElement->end_handle <<
-		  " 0x" << std::hex << pGATTCServiceElement->end_handle << "]";
-	return ss.str();
+	std::string res;
+	char val[6];
+	res += "[uuid: " + BLEUUID(pGATTCServiceElement->uuid).toString() + ", start_handle: ";
+	snprintf(val, sizeof(val), "%d", pGATTCServiceElement->start_handle);
+	res += val;
+	res += " 0x";
+	snprintf(val, sizeof(val), "%04x", pGATTCServiceElement->start_handle);
+	res += val;
+	res += ", end_handle: ";
+	snprintf(val, sizeof(val), "%d", pGATTCServiceElement->end_handle);
+	res += val;
+	res += " 0x";
+	snprintf(val, sizeof(val), "%04x", pGATTCServiceElement->end_handle);
+	res += val;
+	res += "]";
+	return res;
 } // gattcServiceElementToString
 
 

libraries/BLE/src/FreeRTOS.cpp

@@ -61,15 +61,13 @@ uint32_t FreeRTOS::getTimeSinceStart() {
  */
 uint32_t FreeRTOS::Semaphore::wait(std::string owner) {
 	log_v(">> wait: Semaphore waiting: %s for %s", toString().c_str(), owner.c_str());
-
+	
 	if (m_usePthreads) {
 		pthread_mutex_lock(&m_pthread_mutex);
 	} else {
 		xSemaphoreTake(m_semaphore, portMAX_DELAY);
 	}
 
-	m_owner = owner;
-
 	if (m_usePthreads) {
 		pthread_mutex_unlock(&m_pthread_mutex);
 	} else {
@@ -77,17 +75,49 @@ uint32_t FreeRTOS::Semaphore::wait(std::string owner) {
 	}
 
 	log_v("<< wait: Semaphore released: %s", toString().c_str());
-	m_owner = std::string("<N/A>");
 	return m_value;
 } // wait
 
+/**
+ * @brief Wait for a semaphore to be released in a given period of time by trying to take it and
+ * then releasing it again. The value associated with the semaphore can be taken by value() call after return
+ * @param [in] owner A debug tag.
+ * @param [in] timeoutMs timeout to wait in ms.
+ * @return True if we took the semaphore within timeframe.
+ */
+bool FreeRTOS::Semaphore::timedWait(std::string owner, uint32_t timeoutMs) {
+	log_v(">> wait: Semaphore waiting: %s for %s", toString().c_str(), owner.c_str());
+
+	if (m_usePthreads && timeoutMs != portMAX_DELAY) {
+		assert(false);  // We apparently don't have a timed wait for pthreads.
+	}
+
+	auto ret = pdTRUE;
+
+	if (m_usePthreads) {
+		pthread_mutex_lock(&m_pthread_mutex);
+	} else {
+		ret = xSemaphoreTake(m_semaphore, timeoutMs);
+	}
+
+	if (m_usePthreads) {
+		pthread_mutex_unlock(&m_pthread_mutex);
+	} else {
+		xSemaphoreGive(m_semaphore);
+	}
+
+	log_v("<< wait: Semaphore %s released: %d", toString().c_str(), ret);
+	return ret;
+} // wait
+
 
 FreeRTOS::Semaphore::Semaphore(std::string name) {
 	m_usePthreads = false;   	// Are we using pThreads or FreeRTOS?
 	if (m_usePthreads) {
 		pthread_mutex_init(&m_pthread_mutex, nullptr);
 	} else {
-		m_semaphore = xSemaphoreCreateMutex();
+		m_semaphore = xSemaphoreCreateBinary();
+		xSemaphoreGive(m_semaphore);
 	}
 
 	m_name      = name;
@@ -111,6 +141,8 @@ FreeRTOS::Semaphore::~Semaphore() {
  */
 void FreeRTOS::Semaphore::give() {
 	log_v("Semaphore giving: %s", toString().c_str());
+	m_owner = std::string("<N/A>");
+	
 	if (m_usePthreads) {
 		pthread_mutex_unlock(&m_pthread_mutex);
 	} else {
@@ -120,7 +152,6 @@ void FreeRTOS::Semaphore::give() {
 // 	FreeRTOS::sleep(10);
 // #endif
 
-	m_owner = std::string("<N/A>");
 } // Semaphore::give
 
 
@@ -203,9 +234,12 @@ bool FreeRTOS::Semaphore::take(uint32_t timeoutMs, std::string owner) {
  * @return A string representation of the semaphore.
  */
 std::string FreeRTOS::Semaphore::toString() {
-	std::stringstream stringStream;
-	stringStream << "name: "<< m_name << " (0x" << std::hex << std::setfill('0') << (uint32_t)m_semaphore << "), owner: " << m_owner;
-	return stringStream.str();
+	char hex[9];
+	std::string res = "name: " + m_name + " (0x";
+	snprintf(hex, sizeof(hex), "%08x", (uint32_t)m_semaphore);
+	res += hex;
+	res += "), owner: " + m_owner;
+	return res;
 } // toString
 
 

libraries/BLE/src/FreeRTOS.h

@@ -40,6 +40,8 @@ public:
 		bool        take(uint32_t timeoutMs, std::string owner = "<Unknown>");
 		std::string toString();
 		uint32_t	wait(std::string owner = "<Unknown>");
+		bool		timedWait(std::string owner = "<Unknown>", uint32_t timeoutMs = portMAX_DELAY);
+		uint32_t	value(){ return m_value; };
 
 	private:
 		SemaphoreHandle_t m_semaphore;

libraries/BLE/src/GeneralUtils.cpp

@@ -332,9 +332,12 @@ void GeneralUtils::hexDump(const uint8_t* pData, uint32_t length) {
  * @return A string representation of the IP address.
  */
 std::string GeneralUtils::ipToString(uint8_t *ip) {
-	std::stringstream s;
-	s << (int) ip[0] << '.' << (int) ip[1] << '.' << (int) ip[2] << '.' << (int) ip[3];
-	return s.str();
+	auto size = 16;
+	char *val = (char*)malloc(size);
+	snprintf(val, size, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
+	std::string res(val);
+	free(val);
+	return res;
 } // ipToString
 
 
@@ -347,11 +350,14 @@ std::string GeneralUtils::ipToString(uint8_t *ip) {
 std::vector<std::string> GeneralUtils::split(std::string source, char delimiter) {
 	// See also: https://stackoverflow.com/questions/5167625/splitting-a-c-stdstring-using-tokens-e-g
 	std::vector<std::string> strings;
-	std::istringstream iss(source);
-	std::string s;
-	while (std::getline(iss, s, delimiter)) {
-		strings.push_back(trim(s));
+	std::size_t current, previous = 0;
+	current = source.find(delimiter);
+	while (current != std::string::npos) {
+		strings.push_back(trim(source.substr(previous, current - previous)));
+		previous = current + 1;
+		current = source.find(delimiter, previous);
 	}
+	strings.push_back(trim(source.substr(previous, current - previous)));
 	return strings;
 } // split
 

libraries/EEPROM/README.md

@@ -0,0 +1,4 @@
+## EEPROM
+
+EEPROM is deprecated.  For new applications on ESP32, use Preferences.  EEPROM is provided for backwards compatibility with existing Arduino applications.
+EEPROM is implemented using a single blob within NVS, so it is a container within a container. As such, it is not going to be a high performance storage method.  Preferences will directly use nvs, and store each entry as a single object therein.

libraries/EEPROM/examples/eeprom_class/eeprom_class.ino

@@ -1,37 +1,21 @@
 /*
   ESP32 eeprom_class example with EEPROM library
-
   This simple example demonstrates using EEPROM library to store different data in
-  ESP32 Flash memory in a multiple user-defined EEPROM partition (0x1000 or 4KB max size or less).
+  ESP32 Flash memory in a multiple user-defined EEPROM class objects.
   
-  Install 'ESP32 Partiton Manager' ONCE from https://github.com/francis94c/ESP32Partitions
-  And generate different partitions with 'partition_name'
-  Usage: EEPROMClass ANY_OBJECT_NAME("partition_name", size);
-  
-  Generated partition that would work perfectly with this example
-  #Name,   Type, SubType, Offset,   Size,    Flags
-  nvs,     data, nvs,     0x9000,   0x5000,
-  otadata, data, ota,     0xe000,   0x2000,
-  app0,    app,  ota_0,   0x10000,  0x140000,
-  app1,    app,  ota_1,   0x150000, 0x140000,
-  eeprom0, data, 0x99,    0x290000, 0x1000,
-  eeprom1, data, 0x9a,    0x291000, 0x500,
-  eeprom2, data, 0x9b,    0x292000, 0x100,
-  spiffs,  data, spiffs,  0x293000, 0x16d000,
-
   Created for arduino-esp32 on 25 Dec, 2017
   by Elochukwu Ifediora (fedy0)
+  converted to nvs by lbernstone - 06/22/2019
 */
 
 #include "EEPROM.h"
 
-// Instantiate eeprom objects with parameter/argument names and size same as in the partition table
-EEPROMClass  NAMES("eeprom0", 0x1000);
-EEPROMClass  HEIGHT("eeprom1", 0x500);
+// Instantiate eeprom objects with parameter/argument names and sizes
+EEPROMClass  NAMES("eeprom0", 0x500);
+EEPROMClass  HEIGHT("eeprom1", 0x200);
 EEPROMClass  AGE("eeprom2", 0x100);
 
 void setup() {
-  // put your setup code here, to run once:
   Serial.begin(115200);
   Serial.println("Testing EEPROMClass\n");
   if (!NAMES.begin(NAMES.length())) {
@@ -57,7 +41,7 @@ void setup() {
   double height = 5.8;
   uint32_t age = 47;
 
-  // Write: Variables ---> EEPROM partitions
+  // Write: Variables ---> EEPROM stores
   NAMES.put(0, name);
   HEIGHT.put(0, height);
   AGE.put(0, age);
@@ -75,7 +59,7 @@ void setup() {
   Serial.print("age: ");    Serial.println(age);
   Serial.println("------------------------------------\n");
 
-  // Read: Variables <--- EEPROM partitions
+  // Read: Variables <--- EEPROM stores
   NAMES.get(0, name);
   HEIGHT.get(0, height);
   AGE.get(0, age);
@@ -87,6 +71,5 @@ void setup() {
 }
 
 void loop() {
-  // put your main code here, to run repeatedly:
-
+  delay(0xFFFFFFFF);
 }

libraries/EEPROM/examples/eeprom_extra/eeprom_extra.ino

@@ -13,78 +13,127 @@ void setup() {
   // put your setup code here, to run once:
   Serial.begin(115200);
   Serial.println("\nTesting EEPROM Library\n");
-  if (!EEPROM.begin(EEPROM.length())) {
+  if (!EEPROM.begin(1000)) {
     Serial.println("Failed to initialise EEPROM");
     Serial.println("Restarting...");
     delay(1000);
     ESP.restart();
   }
 
-  int address = 0;                                  // Same address is used through the example
+  int address = 0;
 
   EEPROM.writeByte(address, -128);                  // -2^7
-  Serial.println(EEPROM.readByte(address));
+  address += sizeof(byte);
 
   EEPROM.writeChar(address, 'A');                   // Same as writyByte and readByte
-  Serial.println(char(EEPROM.readChar(address)));
+  address += sizeof(char);
 
   EEPROM.writeUChar(address, 255);                  // 2^8 - 1
-  Serial.println(EEPROM.readUChar(address));
+  address += sizeof(unsigned char);
 
   EEPROM.writeShort(address, -32768);               // -2^15
-  Serial.println(EEPROM.readShort(address));
+  address += sizeof(short);
 
   EEPROM.writeUShort(address, 65535);               // 2^16 - 1
-  Serial.println(EEPROM.readUShort(address));
+  address += sizeof(unsigned short);
 
   EEPROM.writeInt(address, -2147483648);            // -2^31
-  Serial.println(EEPROM.readInt(address));
+  address += sizeof(int);
 
   EEPROM.writeUInt(address, 4294967295);            // 2^32 - 1
-  Serial.println(EEPROM.readUInt(address));
+  address += sizeof(unsigned int);
 
   EEPROM.writeLong(address, -2147483648);           // Same as writeInt and readInt
-  Serial.println(EEPROM.readLong(address));
+  address += sizeof(long);
 
   EEPROM.writeULong(address, 4294967295);           // Same as writeUInt and readUInt
-  Serial.println(EEPROM.readULong(address));
+  address += sizeof(unsigned long);
 
   int64_t value = -9223372036854775808;             // -2^63
   EEPROM.writeLong64(address, value);
-  value = 0;                                        // Clear value
-  value = EEPROM.readLong64(value);
-  Serial.printf("0x%08X", (uint32_t)(value >> 32)); // Print High 4 bytes in HEX
-  Serial.printf("%08X\n", (uint32_t)value);         // Print Low 4 bytes in HEX
+  address += sizeof(int64_t);
 
   uint64_t  Value = 18446744073709551615;           // 2^64 - 1
   EEPROM.writeULong64(address, Value);
+  address += sizeof(uint64_t);
+
+  EEPROM.writeFloat(address, 1234.1234);
+  address += sizeof(float);
+
+  EEPROM.writeDouble(address, 123456789.123456789);
+  address += sizeof(double);
+
+  EEPROM.writeBool(address, true);
+  address += sizeof(bool);
+
+  String sentence = "I love ESP32.";
+  EEPROM.writeString(address, sentence);
+  address += sentence.length() + 1;
+
+  char gratitude[21] = "Thank You Espressif!";
+  EEPROM.writeString(address, gratitude);
+  address += 21;
+
+  // See also the general purpose writeBytes() and readBytes() for BLOB in EEPROM library
+  EEPROM.commit();
+  address = 0;
+  
+  Serial.println(EEPROM.readByte(address));
+  address += sizeof(byte);
+
+  Serial.println((char)EEPROM.readChar(address));
+  address += sizeof(char);
+
+  Serial.println(EEPROM.readUChar(address));
+  address += sizeof(unsigned char);
+
+  Serial.println(EEPROM.readShort(address));
+  address += sizeof(short);
+
+  Serial.println(EEPROM.readUShort(address));
+  address += sizeof(unsigned short);
+
+  Serial.println(EEPROM.readInt(address));
+  address += sizeof(int);
+
+  Serial.println(EEPROM.readUInt(address));
+  address += sizeof(unsigned int);
+
+  Serial.println(EEPROM.readLong(address));
+  address += sizeof(long);
+
+  Serial.println(EEPROM.readULong(address));
+  address += sizeof(unsigned long);
+
+  value = 0;
+  value = EEPROM.readLong64(value);
+  Serial.printf("0x%08X", (uint32_t)(value >> 32)); // Print High 4 bytes in HEX
+  Serial.printf("%08X\n", (uint32_t)value);         // Print Low 4 bytes in HEX
+  address += sizeof(int64_t);
+
   Value = 0;                                        // Clear Value
   Value = EEPROM.readULong64(Value);
   Serial.printf("0x%08X", (uint32_t)(Value >> 32)); // Print High 4 bytes in HEX
   Serial.printf("%08X\n", (uint32_t)Value);         // Print Low 4 bytes in HEX
+  address += sizeof(uint64_t);
 
-  EEPROM.writeFloat(address, 1234.1234);
   Serial.println(EEPROM.readFloat(address), 4);
+  address += sizeof(float);
 
-  EEPROM.writeDouble(address, 123456789.123456789);
   Serial.println(EEPROM.readDouble(address), 8);
+  address += sizeof(double);
 
-  EEPROM.writeBool(address, true);
   Serial.println(EEPROM.readBool(address));
+  address += sizeof(bool);
 
-  String sentence = "I love ESP32.";
-  EEPROM.writeString(address, sentence);
   Serial.println(EEPROM.readString(address));
+  address += sentence.length() + 1;
 
-  char gratitude[] = "Thank You Espressif!";
-  EEPROM.writeString(address, gratitude);
   Serial.println(EEPROM.readString(address));
-
-  // See also the general purpose writeBytes() and readBytes() for BLOB in EEPROM library
-  // To avoid data overwrite, next address should be chosen/offset by using "address =+ sizeof(previousData)"
+  address += 21;
 }
 
 void loop() {
   // put your main code here, to run repeatedly:
 
-}
+}

libraries/EEPROM/library.properties

@@ -1,9 +1,9 @@
 name=EEPROM
-version=1.0
+version=1.0.3
 author=Ivan Grokhotkov
 maintainer=Paolo Becchi <pbecchi@aerobusiness.it>
-sentence=Enables reading and writing data to the permanent FLASH storage, up to 4kb.
+sentence=Enables reading and writing data a sequential, addressable FLASH storage
 paragraph=
 category=Data Storage
 url=http://arduino.cc/en/Reference/EEPROM
-architectures=esp32
+architectures=esp32

libraries/EEPROM/src/EEPROM.cpp

@@ -1,10 +1,9 @@
 /*
   EEPROM.h -ported by Paolo Becchi to Esp32 from esp8266 EEPROM
            -Modified by Elochukwu Ifediora <ifedioraelochukwuc@gmail.com>
+           -Converted to nvs lbernstone@gmail.com
 
-  Uses a one sector flash partition defined in partition table
-  OR
-  Multiple sector flash partitions defined by the name column in the partition table
+  Uses a nvs byte array to emulate EEPROM
 
   Copyright (c) 2014 Ivan Grokhotkov. All rights reserved.
   This file is part of the esp8266 core for Arduino environment.
@@ -25,72 +24,121 @@
 */
 
 #include "EEPROM.h"
-
+#include <nvs.h>
+#include <esp_partition.h>
 #include <esp_log.h>
 
-EEPROMClass::EEPROMClass(uint32_t sector)
-  : _sector(sector)
+EEPROMClass::EEPROMClass(void)
+  : _handle(NULL)
+  , _data(0)
+  , _size(0)
+  , _dirty(false)
+  , _name("eeprom")
+  , _user_defined_size(0)
+{
+}
+
+EEPROMClass::EEPROMClass(uint32_t sector)
+// Only for compatiility, no sectors in nvs!
+  : _handle(NULL)
   , _data(0)
   , _size(0)
   , _dirty(false)
-  , _mypart(NULL)
   , _name("eeprom")
   , _user_defined_size(0)
 {
 }
 
 EEPROMClass::EEPROMClass(const char* name, uint32_t user_defined_size)
-  : _sector(0)
+  : _handle(NULL)
   , _data(0)
   , _size(0)
   , _dirty(false)
-  , _mypart(NULL)
   , _name(name)
   , _user_defined_size(user_defined_size)
 {
 }
 
-EEPROMClass::EEPROMClass(void)
-  : _sector(0)// (((uint32_t)&_SPIFFS_end - 0x40200000) / SPI_FLASH_SEC_SIZE))
-  , _data(0)
-  , _size(0)
-  , _dirty(false)
-  , _mypart(NULL)
-  , _name("eeprom")
-  , _user_defined_size(0)
-{
-}
-
 EEPROMClass::~EEPROMClass() {
   // end();
 }
 
 bool EEPROMClass::begin(size_t size) {
-  if (size <= 0) {
-    return false;
+  if (!size) {
+      return false;
   }
-  if (size > SPI_FLASH_SEC_SIZE) {
-    size = SPI_FLASH_SEC_SIZE;
+
+  esp_err_t res = nvs_open(_name, NVS_READWRITE, &_handle);
+  if (res != ESP_OK) {
+      log_e("Unable to open NVS namespace: %d", res);
+      return false;
   }
-  //  _mypart = esp_partition_find_first(ESP_PARTITION_TYPE_DATA,ESP_PARTITION_SUBTYPE_ANY, EEPROM_FLASH_PARTITION_NAME);
-  _mypart = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_ANY, _name);
-  if (_mypart == NULL) {
-    return false;
+
+  size_t key_size = 0;
+  res = nvs_get_blob(_handle, _name, NULL, &key_size);
+  if(res != ESP_OK && res != ESP_ERR_NVS_NOT_FOUND) {
+      log_e("Unable to read NVS key: %d", res);
+      return false;
+  }
+  if (size < key_size) { // truncate
+      log_w("truncating EEPROM from %d to %d", key_size, size);
+      uint8_t* key_data = (uint8_t*) malloc(key_size);
+      if(!key_data) {
+         log_e("Not enough memory to truncate EEPROM!");
+         return false;
+      }
+      nvs_get_blob(_handle, _name, key_data, &key_size);
+      nvs_set_blob(_handle, _name, key_data, size);
+      nvs_commit(_handle);
+      free(key_data);
+  }
+  else if (size > key_size) { // expand or new
+      size_t expand_size = size - key_size;
+      uint8_t* expand_key = (uint8_t*) malloc(expand_size);
+      if(!expand_key) {
+         log_e("Not enough memory to expand EEPROM!");
+         return false;
+      }
+      // check for adequate free space
+      if(nvs_set_blob(_handle, "expand", expand_key, expand_size)) {
+        log_e("Not enough space to expand EEPROM from %d to %d", key_size, size);
+        free(expand_key);
+        return false;
+      }
+      free(expand_key);
+      nvs_erase_key(_handle, "expand");
+      uint8_t* key_data = (uint8_t*) malloc(size);
+      if(!key_data) {
+         log_e("Not enough memory to expand EEPROM!");
+         return false;
+      }
+      memset(key_data, 0xFF, size);
+      if(key_size) {
+        log_i("Expanding EEPROM from %d to %d", key_size, size);
+	// hold data while key is deleted
+        nvs_get_blob(_handle, _name, key_data, &key_size);
+        nvs_erase_key(_handle, _name);
+      } else {
+        log_i("New EEPROM of %d bytes", size);
+      }
+      nvs_commit(_handle);
+      nvs_set_blob(_handle, _name, key_data, size);
+      free(key_data);
+      nvs_commit(_handle);
   }
-  size = (size + 3) & (~3);
 
   if (_data) {
     delete[] _data;
   }
 
-  _data = new uint8_t[size];
-  _size = size;
-  bool ret = false;
-  if (esp_partition_read (_mypart, 0, (void *) _data, _size) == ESP_OK) {
-    ret = true;
+  _data = (uint8_t*) malloc(size);
+  if(!_data) {
+    log_e("Not enough memory for %d bytes in EEPROM");
+    return false;
   }
-
-  return ret;
+  _size = size;
+  nvs_get_blob(_handle, _name, _data, &_size);
+  return true;
 }
 
 void EEPROMClass::end() {
@@ -134,29 +182,21 @@ void EEPROMClass::write(int address, uint8_t value) {
 
 bool EEPROMClass::commit() {
   bool ret = false;
-  if (!_size)
-    return false;
-  if (!_dirty)
-    return true;
-  if (!_data)
-    return false;
-
-
-  if (esp_partition_erase_range(_mypart, 0, SPI_FLASH_SEC_SIZE) != ESP_OK)
-  {
-    log_e( "partition erase err.");
+  if (!_size) {
+      return false;
   }
-  else
-  {
-    if (esp_partition_write(_mypart, 0, (void *)_data, _size) == ESP_ERR_INVALID_SIZE)
-    {
-      log_e( "error in Write");
-    }
-    else
-    {
+  if (!_data) {
+      return false;
+  }
+  if (!_dirty) {
+      return true;
+  }
+
+  if (ESP_OK != nvs_set_blob(_handle, _name, _data, _size)) {
+      log_e( "error in write");
+  } else {
       _dirty = false;
       ret = true;
-    }
   }
 
   return ret;
@@ -175,6 +215,67 @@ uint16_t EEPROMClass::length ()
   return _user_defined_size;
 }
 
+/* 
+   Convert EEPROM partition into nvs blob
+   Call convert before you call begin
+*/
+uint16_t EEPROMClass::convert (bool clear, const char* EEPROMname, const char* nvsname)
+{
+  uint16_t result = 0;
+  const esp_partition_t* mypart = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_ANY, EEPROMname);
+  if (mypart == NULL) {
+    log_i("EEPROM partition not found for conversion");
+    return result;
+  }
+
+  size_t size = mypart->size;
+  uint8_t* data = (uint8_t*) malloc(size);
+  if (!data) {
+    log_e("Not enough memory to convert EEPROM!");
+    goto exit;
+  }
+
+  if (esp_partition_read (mypart, 0, (void *) data, size) != ESP_OK) {
+    log_e("Unable to read EEPROM partition");
+    goto exit;
+  }
+
+  bool empty;
+  empty = true;
+  for (int x=0; x<size; x++) {
+    if (data[x] != 0xFF) {
+      empty = false;
+      break;
+    }
+  }
+  if (empty) {
+    log_i("EEPROM partition is empty, will not convert");
+    goto exit;
+  }
+
+  nvs_handle handle;
+  if (nvs_open(nvsname, NVS_READWRITE, &handle) != ESP_OK) {
+    log_e("Unable to open NVS");
+    goto exit;
+  }
+  esp_err_t err;
+  err = nvs_set_blob(handle, nvsname, data, size);
+  if (err != ESP_OK) {
+    log_e("Unable to add EEPROM data to NVS: %s", esp_err_to_name(err));
+    goto exit;
+  }
+  result = size;
+ 
+  if (clear) {
+    if (esp_partition_erase_range (mypart, 0, size) != ESP_OK) {
+      log_w("Unable to clear EEPROM partition");
+    }
+  } 
+exit:
+  free(data);
+  return result;
+}
+
 /*
    Read 'value' from 'address'
 */

libraries/EEPROM/src/EEPROM.h

@@ -1,10 +1,9 @@
 /*
   EEPROM.h -ported by Paolo Becchi to Esp32 from esp8266 EEPROM
            -Modified by Elochukwu Ifediora <ifedioraelochukwuc@gmail.com>
+           -Converted to nvs lbernstone@gmail.com
 
-  Uses a one sector flash partition defined in partition table
-  OR
-  Multiple sector flash partitions defined by the name column in the partition table
+  Uses a nvs byte array to emulate EEPROM
 
   Copyright (c) 2014 Ivan Grokhotkov. All rights reserved.
   This file is part of the esp8266 core for Arduino environment.
@@ -30,19 +29,9 @@
 #define EEPROM_FLASH_PARTITION_NAME "eeprom"
 #endif
 #include <Arduino.h>
-extern "C" {
 
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-#include <esp_partition.h>
-}
+typedef uint32_t nvs_handle;
 
-//
-//   need to define AT LEAST a flash partition for EEPROM  with above name
-//
-//           eeprom , data , 0x99, start address, 0x1000
-//
 class EEPROMClass {
   public:
     EEPROMClass(uint32_t sector);
@@ -58,6 +47,7 @@ class EEPROMClass {
     void end();
 
     uint8_t * getDataPtr();
+    uint16_t convert(bool clear, const char* EEPROMname = "eeprom", const char* nvsname = "eeprom");
 
     template<typename T>
     T &get(int address, T &t) {
@@ -117,11 +107,10 @@ class EEPROMClass {
     template <class T> T writeAll (int address, const T &);
 
   protected:
-    uint32_t _sector;
+    nvs_handle _handle;
     uint8_t* _data;
     size_t _size;
     bool _dirty;
-    const esp_partition_t * _mypart;
     const char* _name;
     uint32_t _user_defined_size;
 };

libraries/ESP32/examples/Camera/CameraWebServer/app_httpd.cpp

@@ -20,7 +20,6 @@
 
 #include "fb_gfx.h"
 #include "fd_forward.h"
-#include "dl_lib.h"
 #include "fr_forward.h"
 
 #define ENROLL_CONFIRM_TIMES 5

libraries/ESP32/examples/DeepSleep/TimerWakeUp/TimerWakeUp.ino

@@ -19,7 +19,7 @@ Author:
 Pranav Cherukupalli <cherukupallip@gmail.com>
 */
 
-#define uS_TO_S_FACTOR 1000000  /* Conversion factor for micro seconds to seconds */
+#define uS_TO_S_FACTOR 1000000ULL  /* Conversion factor for micro seconds to seconds */
 #define TIME_TO_SLEEP  5        /* Time ESP32 will go to sleep (in seconds) */
 
 RTC_DATA_ATTR int bootCount = 0;

libraries/ESP32/examples/RMT/RMTWriteNeoPixel/RMTWriteNeoPixel.ino

@@ -62,7 +62,7 @@ void loop()
     for (led=0; led<NR_OF_LEDS; led++) {
         for (col=0; col<3; col++ ) {
             for (bit=0; bit<8; bit++){
-                if ( (color[col] & (1<<(8-bit))) && (led == led_index) ) {
+                if ( (color[col] & (1<<(7-bit))) && (led == led_index) ) {
                     led_data[i].level0 = 1;
                     led_data[i].duration0 = 8;
                     led_data[i].level1 = 0;

libraries/ESPmDNS/examples/mDNS_Web_Server/mDNS_Web_Server.ino

@@ -96,7 +96,6 @@ void loop(void)
     req = req.substring(addr_start + 1, addr_end);
     Serial.print("Request: ");
     Serial.println(req);
-    client.flush();
 
     String s;
     if (req == "/")
@@ -115,6 +114,7 @@ void loop(void)
     }
     client.print(s);
 
+    client.stop();
     Serial.println("Done with client");
 }
 

libraries/FFat/src/FFat.cpp

@@ -68,7 +68,7 @@ void F_Fat::end()
             log_e("Unmounting FFat partition failed! Error: %d", err);
             return;
         }
-        _wl_handle = NULL;
+        _wl_handle = 0;
         _impl->mountpoint(NULL);
     }
 }
@@ -109,7 +109,9 @@ size_t F_Fat::totalBytes()
 
     BYTE pdrv = ff_diskio_get_pdrv_wl(_wl_handle);
     char drv[3] = {(char)(48+pdrv), ':', 0};
-    FRESULT res = f_getfree(drv, &free_clust, &fs);
+    if ( f_getfree(drv, &free_clust, &fs) != FR_OK){
+        return 0;
+    }
     tot_sect = (fs->n_fatent - 2) * fs->csize;
     sect_size = CONFIG_WL_SECTOR_SIZE;
     return tot_sect * sect_size;
@@ -123,7 +125,9 @@ size_t F_Fat::freeBytes()
 
     BYTE pdrv = ff_diskio_get_pdrv_wl(_wl_handle);
     char drv[3] = {(char)(48+pdrv), ':', 0};
-    FRESULT res = f_getfree(drv, &free_clust, &fs);
+    if ( f_getfree(drv, &free_clust, &fs) != FR_OK){
+        return 0;
+    }
     free_sect = free_clust * fs->csize;
     sect_size = CONFIG_WL_SECTOR_SIZE;
     return free_sect * sect_size;

libraries/HTTPClient/src/HTTPClient.cpp

@@ -1,3 +1,4 @@
+#include <HardwareSerial.h>
 /**
  * HTTPClient.cpp
  *
@@ -195,6 +196,11 @@ bool HTTPClient::begin(String url, const char* CAcert)
     }
     _secure = true;
     _transportTraits = TransportTraitsPtr(new TLSTraits(CAcert));
+    if(!_transportTraits) {
+        log_e("could not create transport traits");
+        return false;
+    }
+
     return true;
 }
 
@@ -215,6 +221,11 @@ bool HTTPClient::begin(String url)
         return begin(url, (const char*)NULL);
     }
     _transportTraits = TransportTraitsPtr(new TransportTraits());
+    if(!_transportTraits) {
+        log_e("could not create transport traits");
+        return false;
+    }
+
     return true;
 }
 #endif // HTTPCLIENT_1_1_COMPATIBLE
@@ -333,7 +344,8 @@ bool HTTPClient::begin(String host, uint16_t port, String uri, const char* CAcer
  */
 void HTTPClient::end(void)
 {
-    disconnect();
+    disconnect(false);
+    clear();
 }
 
 
@@ -342,7 +354,7 @@ void HTTPClient::end(void)
  * disconnect
  * close the TCP socket
  */
-void HTTPClient::disconnect()
+void HTTPClient::disconnect(bool preserveClient)
 {
     if(connected()) {
         if(_client->available() > 0) {
@@ -357,7 +369,9 @@ void HTTPClient::disconnect()
         } else {
             log_d("tcp stop\n");
             _client->stop();
-            _client = nullptr;
+            if(!preserveClient) {
+                _client = nullptr;
+            }
 #ifdef HTTPCLIENT_1_1_COMPATIBLE
             if(_tcpDeprecated) {
                 _transportTraits.reset(nullptr);
@@ -456,6 +470,7 @@ void HTTPClient::setTimeout(uint16_t timeout)
 void HTTPClient::useHTTP10(bool useHTTP10)
 {
     _useHTTP10 = useHTTP10;
+    _reuse = !useHTTP10;
 }
 
 /**
@@ -816,7 +831,8 @@ int HTTPClient::writeToStream(Stream * stream)
         return returnError(HTTPC_ERROR_ENCODING);
     }
 
-    end();
+//    end();
+    disconnect(true);
     return ret;
 }
 
@@ -970,9 +986,12 @@ bool HTTPClient::hasHeader(const char* name)
  */
 bool HTTPClient::connect(void)
 {
-
     if(connected()) {
-        log_d("already connected, try reuse!");
+        if(_reuse) {
+            log_d("already connected, reusing connection");
+        } else {
+            log_d("already connected, try reuse!");
+        }
         while(_client->available() > 0) {
             _client->read();
         }
@@ -980,8 +999,12 @@ bool HTTPClient::connect(void)
     }
 
 #ifdef HTTPCLIENT_1_1_COMPATIBLE
-     if(!_client) {
+     if(_transportTraits && !_client) {
         _tcpDeprecated = _transportTraits->create();
+        if(!_tcpDeprecated) {
+            log_e("failed to create client");
+            return false;
+        }
         _client = _tcpDeprecated.get();
      }
 #endif
@@ -1080,9 +1103,12 @@ int HTTPClient::handleHeaderResponse()
         return HTTPC_ERROR_NOT_CONNECTED;
     }
 
+    clear();
+
+    _canReuse = _reuse;
+
     String transferEncoding;
-    _returnCode = -1;
-    _size = -1;
+
     _transferEncoding = HTTPC_TE_IDENTITY;
     unsigned long lastDataTime = millis();
 
@@ -1097,6 +1123,9 @@ int HTTPClient::handleHeaderResponse()
             log_v("RX: '%s'", headerLine.c_str());
 
             if(headerLine.startsWith("HTTP/1.")) {
+                if(_canReuse) {
+                    _canReuse = (headerLine[sizeof "HTTP/1." - 1] != '0');
+                }
                 _returnCode = headerLine.substring(9, headerLine.indexOf(' ', 9)).toInt();
             } else if(headerLine.indexOf(':')) {
                 String headerName = headerLine.substring(0, headerLine.indexOf(':'));
@@ -1107,8 +1136,10 @@ int HTTPClient::handleHeaderResponse()
                     _size = headerValue.toInt();
                 }
 
-                if(headerName.equalsIgnoreCase("Connection")) {
-                    _canReuse = headerValue.equalsIgnoreCase("keep-alive");
+                if(_canReuse && headerName.equalsIgnoreCase("Connection")) {
+                    if(headerValue.indexOf("close") >= 0 && headerValue.indexOf("keep-alive") < 0) {
+                        _canReuse = false;
+                    }
                 }
 
                 if(headerName.equalsIgnoreCase("Transfer-Encoding")) {

libraries/HTTPClient/src/HTTPClient.h

@@ -197,7 +197,7 @@ protected:
     };
 
     bool beginInternal(String url, const char* expectedProtocol);
-    void disconnect();
+    void disconnect(bool preserveClient = false);
     void clear();
     int returnError(int error);
     bool connect(void);
@@ -217,7 +217,7 @@ protected:
     String _host;
     uint16_t _port = 0;
     int32_t _connectTimeout = -1;
-    bool _reuse = false;
+    bool _reuse = true;
     uint16_t _tcpTimeout = HTTPCLIENT_DEFAULT_TCP_TIMEOUT;
     bool _useHTTP10 = false;
     bool _secure = false;

libraries/HTTPUpdate/examples/httpUpdateSecure/httpUpdateSecure.ino

@@ -96,7 +96,7 @@ void loop() {
     client.setCACert(rootCACertificate);
 
     // Reading data over SSL may be slow, use an adequate timeout
-    client.setTimeout(12000);
+    client.setTimeout(12000 / 1000); // timeout argument is defined in seconds for setTimeout
 
     // The line below is optional. It can be used to blink the LED on the board during flashing
     // The LED will be on during download of one buffer of data from the network. The LED will

libraries/SPIFFS/src/SPIFFS.cpp

@@ -20,13 +20,33 @@ extern "C" {
 #include <dirent.h>
 #include "esp_spiffs.h"
 }
+
 #include "SPIFFS.h"
 
 using namespace fs;
 
-SPIFFSFS::SPIFFSFS(FSImplPtr impl)
-    : FS(impl)
-{}
+class SPIFFSImpl : public VFSImpl
+{
+public:
+    SPIFFSImpl();
+    virtual ~SPIFFSImpl() { }
+    virtual bool exists(const char* path);
+};
+
+SPIFFSImpl::SPIFFSImpl()
+{
+}
+
+bool SPIFFSImpl::exists(const char* path)
+{
+    File f = open(path, "r");
+    return (f == true) && !f.isDirectory();
+}
+
+SPIFFSFS::SPIFFSFS() : FS(FSImplPtr(new SPIFFSImpl()))
+{
+
+}
 
 bool SPIFFSFS::begin(bool formatOnFail, const char * basePath, uint8_t maxOpenFiles)
 {
@@ -98,16 +118,5 @@ size_t SPIFFSFS::usedBytes()
     return used;
 }
 
-bool SPIFFSFS::exists(const char* path)
-{
-    File f = open(path, "r");
-    return (f == true) && !f.isDirectory();
-}
+SPIFFSFS SPIFFS;
 
-bool SPIFFSFS::exists(const String& path)
-{
-    return exists(path.c_str());
-}
-
-
-SPIFFSFS SPIFFS = SPIFFSFS(FSImplPtr(new VFSImpl()));

libraries/SPIFFS/src/SPIFFS.h

@@ -22,18 +22,17 @@ namespace fs
 class SPIFFSFS : public FS
 {
 public:
-    SPIFFSFS(FSImplPtr impl);
+    SPIFFSFS();
     bool begin(bool formatOnFail=false, const char * basePath="/spiffs", uint8_t maxOpenFiles=10);
     bool format();
     size_t totalBytes();
     size_t usedBytes();
     void end();
-    bool exists(const char* path);
-    bool exists(const String& path);
 };
 
 }
 
 extern fs::SPIFFSFS SPIFFS;
 
-#endif /* _SPIFFS_H_ */
+
+#endif

libraries/Ticker/src/Ticker.cpp

@@ -43,9 +43,9 @@ void Ticker::_attach_ms(uint32_t milliseconds, bool repeat, callback_with_arg_t
   }
   esp_timer_create(&_timerConfig, &_timer);
   if (repeat) {
-    esp_timer_start_periodic(_timer, milliseconds * 1000);
+    esp_timer_start_periodic(_timer, milliseconds * 1000ULL);
   } else {
-    esp_timer_start_once(_timer, milliseconds * 1000);
+    esp_timer_start_once(_timer, milliseconds * 1000ULL);
   }
 }
 

libraries/Update/src/Update.h

@@ -62,7 +62,7 @@ class UpdateClass {
       If all bytes are written
       this call will write the config to eboot
       and return true
-      If there is already an update running but is not finished and !evenIfRemainanig
+      If there is already an update running but is not finished and !evenIfRemaining
       or there is an error
       this will clear everything and return false
       the last error is available through getError()

libraries/Update/src/Updater.cpp

@@ -189,6 +189,9 @@ bool UpdateClass::_writeBuffer(){
         //this ensures that partially written firmware will not be bootable
         _buffer[0] = 0xFF;
     }
+    if (!_progress && _progress_callback) {
+        _progress_callback(0, _size);
+    }
     if(!ESP.flashEraseSector((_partition->address + _progress)/SPI_FLASH_SEC_SIZE)){
         _abort(UPDATE_ERROR_ERASE);
         return false;
@@ -204,6 +207,9 @@ bool UpdateClass::_writeBuffer(){
     _md5.add(_buffer, _bufferLen);
     _progress += _bufferLen;
     _bufferLen = 0;
+    if (_progress_callback) {
+        _progress_callback(_progress, _size);
+    }
     return true;
 }
 
@@ -319,9 +325,6 @@ size_t UpdateClass::writeStream(Stream &data) {
         _reset();
         return 0;
     }
-    if (_progress_callback) {
-        _progress_callback(0, _size);
-    }
 
     if(_ledPin != -1) {
         pinMode(_ledPin, OUTPUT);
@@ -352,12 +355,6 @@ size_t UpdateClass::writeStream(Stream &data) {
         if((_bufferLen == remaining() || _bufferLen == SPI_FLASH_SEC_SIZE) && !_writeBuffer())
             return written;
         written += toRead;
-        if(_progress_callback) {
-            _progress_callback(_progress, _size);
-        }
-    }
-    if(_progress_callback) {
-        _progress_callback(_size, _size);
     }
     return written;
 }

libraries/WebServer/src/Parsing.cpp

@@ -303,6 +303,7 @@ void WebServer::_uploadWriteByte(uint8_t b){
 }
 
 int WebServer::_uploadReadByte(WiFiClient& client){
+  if (!client.connected()) return -1;
   int res = client.read();
   if(res < 0) {
     // keep trying until you either read a valid byte or timeout

libraries/WebServer/src/WebServer.cpp

@@ -39,7 +39,8 @@ static const char Content_Length[] = "Content-Length";
 
 
 WebServer::WebServer(IPAddress addr, int port)
-: _server(addr, port)
+: _corsEnabled(false)
+, _server(addr, port)
 , _currentMethod(HTTP_ANY)
 , _currentVersion(0)
 , _currentStatus(HC_NONE)
@@ -59,7 +60,8 @@ WebServer::WebServer(IPAddress addr, int port)
 }
 
 WebServer::WebServer(int port)
-: _server(port)
+: _corsEnabled(false)
+, _server(port)
 , _currentMethod(HTTP_ANY)
 , _currentVersion(0)
 , _currentStatus(HC_NONE)
@@ -104,7 +106,7 @@ void WebServer::begin(uint16_t port) {
 
 String WebServer::_extractParam(String& authReq,const String& param,const char delimit){
   int _begin = authReq.indexOf(param);
-  if (_begin == -1) 
+  if (_begin == -1)
     return "";
   return authReq.substring(_begin+param.length(),authReq.indexOf(delimit,_begin+param.length()));
 }
@@ -300,7 +302,9 @@ void WebServer::handleClient() {
       // Wait for data from client to become available
       if (_currentClient.available()) {
         if (_parseRequest(_currentClient)) {
-          _currentClient.setTimeout(HTTP_MAX_SEND_WAIT);
+          // because HTTP_MAX_SEND_WAIT is expressed in milliseconds,
+          // it must be divided by 1000
+          _currentClient.setTimeout(HTTP_MAX_SEND_WAIT / 1000);
           _contentLength = CONTENT_LENGTH_NOT_SET;
           _handleRequest();
 
@@ -366,6 +370,14 @@ void WebServer::setContentLength(const size_t contentLength) {
     _contentLength = contentLength;
 }
 
+void WebServer::enableCORS(boolean value) {
+  _corsEnabled = value;
+}
+
+void WebServer::enableCrossOrigin(boolean value) {
+  enableCORS(value);
+}
+
 void WebServer::_prepareHeader(String& response, int code, const char* content_type, size_t contentLength) {
     response = String(F("HTTP/1.")) + String(_currentVersion) + ' ';
     response += String(code);
@@ -388,6 +400,9 @@ void WebServer::_prepareHeader(String& response, int code, const char* content_t
       sendHeader(String(F("Accept-Ranges")),String(F("none")));
       sendHeader(String(F("Transfer-Encoding")),String(F("chunked")));
     }
+    if (_corsEnabled) {
+        sendHeader(String(FPSTR("Access-Control-Allow-Origin")), String("*"));
+    }
     sendHeader(String(F("Connection")), String(F("close")));
 
     response += _responseHeaders;
@@ -494,7 +509,7 @@ void WebServer::_streamFileCore(const size_t fileSize, const String & fileName,
   send(200, contentType, "");
 }
 
-String WebServer::pathArg(unsigned int i) { 
+String WebServer::pathArg(unsigned int i) {
   if (_currentHandler != nullptr)
     return _currentHandler->pathArg(i);
   return "";

libraries/WebServer/src/WebServer.h

@@ -122,6 +122,9 @@ public:
   void send_P(int code, PGM_P content_type, PGM_P content);
   void send_P(int code, PGM_P content_type, PGM_P content, size_t contentLength);
 
+  void enableCORS(boolean value = true);
+  void enableCrossOrigin(boolean value = true);
+
   void setContentLength(const size_t contentLength);
   void sendHeader(const String& name, const String& value, bool first = false);
   void sendContent(const String& content);
@@ -130,12 +133,12 @@ public:
 
   static String urlDecode(const String& text);
 
-  template<typename T> 
+  template<typename T>
   size_t streamFile(T &file, const String& contentType) {
     _streamFileCore(file.size(), file.name(), contentType);
     return _currentClient.write(file);
   }
-  
+
 protected:
   virtual size_t _currentClientWrite(const char* b, size_t l) { return _currentClient.write( b, l ); }
   virtual size_t _currentClientWrite_P(PGM_P b, size_t l) { return _currentClient.write_P( b, l ); }
@@ -151,7 +154,7 @@ protected:
   int _uploadReadByte(WiFiClient& client);
   void _prepareHeader(String& response, int code, const char* content_type, size_t contentLength);
   bool _collectHeader(const char* headerName, const char* headerValue);
- 
+
   void _streamFileCore(const size_t fileSize, const String & fileName, const String & contentType);
 
   String _getRandomHexString();
@@ -163,6 +166,7 @@ protected:
     String value;
   };
 
+  boolean     _corsEnabled;
   WiFiServer  _server;
 
   WiFiClient  _currentClient;

libraries/WiFi/src/ETH.cpp

@@ -197,6 +197,33 @@ IPAddress ETHClass::dnsIP(uint8_t dns_no)
     return IPAddress(dns_ip.u_addr.ip4.addr);
 }
 
+IPAddress ETHClass::broadcastIP()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_ETH, &ip)){
+        return IPAddress();
+    }
+    return WiFiGenericClass::calculateBroadcast(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+IPAddress ETHClass::networkID()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_ETH, &ip)){
+        return IPAddress();
+    }
+    return WiFiGenericClass::calculateNetworkID(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+uint8_t ETHClass::subnetCIDR()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_ETH, &ip)){
+        return (uint8_t)0;
+    }
+    return WiFiGenericClass::calculateSubnetCIDR(IPAddress(ip.netmask.addr));
+}
+
 const char * ETHClass::getHostname()
 {
     const char * hostname;

libraries/WiFi/src/ETH.h

@@ -79,6 +79,10 @@ class ETHClass {
         IPAddress gatewayIP();
         IPAddress dnsIP(uint8_t dns_no = 0);
 
+        IPAddress broadcastIP();
+        IPAddress networkID();
+        uint8_t subnetCIDR();
+
         uint8_t * macAddress(uint8_t* mac);
         String macAddress();
 

libraries/WiFi/src/WiFiAP.cpp

@@ -235,6 +235,47 @@ IPAddress WiFiAPClass::softAPIP()
     return IPAddress(ip.ip.addr);
 }
 
+/**
+ * Get the softAP broadcast IP address.
+ * @return IPAddress softAP broadcastIP
+ */
+IPAddress WiFiAPClass::softAPBroadcastIP()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return IPAddress();
+    }
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_AP, &ip);
+    return WiFiGenericClass::calculateBroadcast(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+/**
+ * Get the softAP network ID.
+ * @return IPAddress softAP networkID
+ */
+IPAddress WiFiAPClass::softAPNetworkID()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return IPAddress();
+    }
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_AP, &ip);
+    return WiFiGenericClass::calculateNetworkID(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+/**
+ * Get the softAP subnet CIDR.
+ * @return uint8_t softAP subnetCIDR
+ */
+uint8_t WiFiAPClass::softAPSubnetCIDR()
+{
+    tcpip_adapter_ip_info_t ip;
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return (uint8_t)0;
+    }
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_AP, &ip);
+    return WiFiGenericClass::calculateSubnetCIDR(IPAddress(ip.netmask.addr));
+}
 
 /**
  * Get the softAP interface MAC address.

libraries/WiFi/src/WiFiAP.h

@@ -45,6 +45,10 @@ public:
 
     IPAddress softAPIP();
 
+    IPAddress softAPBroadcastIP();
+    IPAddress softAPNetworkID();
+    uint8_t softAPSubnetCIDR();
+
     bool softAPenableIpV6();
     IPv6Address softAPIPv6();
 

libraries/WiFi/src/WiFiClient.cpp

@@ -226,14 +226,41 @@ int WiFiClient::connect(IPAddress ip, uint16_t port, int32_t timeout)
     FD_SET(sockfd, &fdset);
     tv.tv_sec = 0;
     tv.tv_usec = timeout * 1000;
-    lwip_connect_r(sockfd, (struct sockaddr*)&serveraddr, sizeof(serveraddr));
-    int res = select(sockfd + 1, nullptr, &fdset, nullptr, timeout<0 ? nullptr : &tv);
-    if (res != 1)
-    {
-        log_e("select: %d",errno);
+
+    int res = lwip_connect_r(sockfd, (struct sockaddr*)&serveraddr, sizeof(serveraddr));
+    if (res < 0 && errno != EINPROGRESS) {
+        log_e("connect on fd %d, errno: %d, \"%s\"", sockfd, errno, strerror(errno));
         close(sockfd);
         return 0;
     }
+
+    res = select(sockfd + 1, nullptr, &fdset, nullptr, timeout<0 ? nullptr : &tv);
+    if (res < 0) {
+        log_e("select on fd %d, errno: %d, \"%s\"", sockfd, errno, strerror(errno));
+        close(sockfd);
+        return 0;
+    } else if (res == 0) {
+        log_i("select returned due to timeout %d ms for fd %d", timeout, sockfd);
+        close(sockfd);
+        return 0;
+    } else {
+        int sockerr;
+        socklen_t len = (socklen_t)sizeof(int);
+        res = getsockopt(sockfd, SOL_SOCKET, SO_ERROR, &sockerr, &len);
+
+        if (res < 0) {
+            log_e("getsockopt on fd %d, errno: %d, \"%s\"", sockfd, errno, strerror(errno));
+            close(sockfd);
+            return 0;
+        }
+
+        if (sockerr != 0) {
+            log_e("socket error on fd %d, errno: %d, \"%s\"", sockfd, sockerr, strerror(sockerr));
+            close(sockfd);
+            return 0;
+        }
+    }
+
     fcntl( sockfd, F_SETFL, fcntl( sockfd, F_GETFL, 0 ) & (~O_NONBLOCK) );
     clientSocketHandle.reset(new WiFiClientSocketHandle(sockfd));
     _rxBuffer.reset(new WiFiClientRxBuffer(sockfd));

libraries/WiFi/src/WiFiGeneric.cpp

@@ -333,7 +333,9 @@ const char * system_event_reasons[] = { "UNSPECIFIED", "AUTH_EXPIRE", "AUTH_LEAV
 #endif
 esp_err_t WiFiGenericClass::_eventCallback(void *arg, system_event_t *event)
 {
-    if(event->event_id < 26) log_d("Event: %d - %s", event->event_id, system_event_names[event->event_id]);
+    if(event->event_id < 26) {
+        log_d("Event: %d - %s", event->event_id, system_event_names[event->event_id]);
+    }
     if(event->event_id == SYSTEM_EVENT_SCAN_DONE) {
         WiFiScanClass::_scanDone();
 
@@ -654,3 +656,45 @@ int WiFiGenericClass::hostByName(const char* aHostname, IPAddress& aResult)
     return (uint32_t)aResult != 0;
 }
 
+IPAddress WiFiGenericClass::calculateNetworkID(IPAddress ip, IPAddress subnet) {
+	IPAddress networkID;
+
+	for (size_t i = 0; i < 4; i++)
+		networkID[i] = subnet[i] & ip[i];
+
+	return networkID;
+}
+
+IPAddress WiFiGenericClass::calculateBroadcast(IPAddress ip, IPAddress subnet) {
+    IPAddress broadcastIp;
+    
+    for (int i = 0; i < 4; i++)
+        broadcastIp[i] = ~subnet[i] | ip[i];
+
+    return broadcastIp;
+}
+
+uint8_t WiFiGenericClass::calculateSubnetCIDR(IPAddress subnetMask) {
+	uint8_t CIDR = 0;
+
+	for (uint8_t i = 0; i < 4; i++) {
+		if (subnetMask[i] == 0x80)  // 128
+			CIDR += 1;
+		else if (subnetMask[i] == 0xC0)  // 192
+			CIDR += 2;
+		else if (subnetMask[i] == 0xE0)  // 224
+			CIDR += 3;
+		else if (subnetMask[i] == 0xF0)  // 242
+			CIDR += 4;
+		else if (subnetMask[i] == 0xF8)  // 248
+			CIDR += 5;
+		else if (subnetMask[i] == 0xFC)  // 252
+			CIDR += 6;
+		else if (subnetMask[i] == 0xFE)  // 254
+			CIDR += 7;
+		else if (subnetMask[i] == 0xFF)  // 255
+			CIDR += 8;
+	}
+
+	return CIDR;
+}

libraries/WiFi/src/WiFiGeneric.h

@@ -108,6 +108,10 @@ class WiFiGenericClass
   public:
     static int hostByName(const char *aHostname, IPAddress &aResult);
 
+    static IPAddress calculateNetworkID(IPAddress ip, IPAddress subnet);
+    static IPAddress calculateBroadcast(IPAddress ip, IPAddress subnet);
+    static uint8_t calculateSubnetCIDR(IPAddress subnetMask);
+
   protected:
     friend class WiFiSTAClass;
     friend class WiFiScanClass;

libraries/WiFi/src/WiFiMulti.cpp

@@ -34,22 +34,64 @@ WiFiMulti::WiFiMulti()
 
 WiFiMulti::~WiFiMulti()
 {
-    APlistClean();
+    for(uint32_t i = 0; i < APlist.size(); i++) {
+        WifiAPlist_t entry = APlist[i];
+        if(entry.ssid) {
+            free(entry.ssid);
+        }
+        if(entry.passphrase) {
+            free(entry.passphrase);
+        }
+    }
+    APlist.clear();
 }
 
 bool WiFiMulti::addAP(const char* ssid, const char *passphrase)
 {
-    return APlistAdd(ssid, passphrase);
+    WifiAPlist_t newAP;
+
+    if(!ssid || *ssid == 0x00 || strlen(ssid) > 31) {
+        // fail SSID too long or missing!
+        log_e("[WIFI][APlistAdd] no ssid or ssid too long");
+        return false;
+    }
+
+    if(passphrase && strlen(passphrase) > 63) {
+        // fail passphrase too long!
+        log_e("[WIFI][APlistAdd] passphrase too long");
+        return false;
+    }
+
+    newAP.ssid = strdup(ssid);
+
+    if(!newAP.ssid) {
+        log_e("[WIFI][APlistAdd] fail newAP.ssid == 0");
+        return false;
+    }
+
+    if(passphrase && *passphrase != 0x00) {
+        newAP.passphrase = strdup(passphrase);
+        if(!newAP.passphrase) {
+            log_e("[WIFI][APlistAdd] fail newAP.passphrase == 0");
+            free(newAP.ssid);
+            return false;
+        }
+    } else {
+        newAP.passphrase = NULL;
+    }
+
+    APlist.push_back(newAP);
+    log_i("[WIFI][APlistAdd] add SSID: %s", newAP.ssid);
+    return true;
 }
 
 uint8_t WiFiMulti::run(uint32_t connectTimeout)
 {
-
     int8_t scanResult;
     uint8_t status = WiFi.status();
     if(status == WL_CONNECTED) {
         for(uint32_t x = 0; x < APlist.size(); x++) {
-            if(WiFi.SSID()==APlist[x].ssid){
+            if(WiFi.SSID()==APlist[x].ssid) {
                 return status;
             }
         }
@@ -119,7 +161,7 @@ uint8_t WiFiMulti::run(uint32_t connectTimeout)
 
             WiFi.begin(bestNetwork.ssid, bestNetwork.passphrase, bestChannel, bestBSSID);
             status = WiFi.status();
-            
+
             auto startTime = millis();
             // wait for connection, fail, or timeout
             while(status != WL_CONNECTED && status != WL_NO_SSID_AVAIL && status != WL_CONNECT_FAILED && (millis() - startTime) <= connectTimeout) {
@@ -128,17 +170,17 @@ uint8_t WiFiMulti::run(uint32_t connectTimeout)
             }
 
             switch(status) {
-            case 3:
+            case WL_CONNECTED:
                 log_i("[WIFI] Connecting done.");
                 log_d("[WIFI] SSID: %s", WiFi.SSID().c_str());
                 log_d("[WIFI] IP: %s", WiFi.localIP().toString().c_str());
                 log_d("[WIFI] MAC: %s", WiFi.BSSIDstr().c_str());
                 log_d("[WIFI] Channel: %d", WiFi.channel());
                 break;
-            case 1:
+            case WL_NO_SSID_AVAIL:
                 log_e("[WIFI] Connecting Failed AP not found.");
                 break;
-            case 4:
+            case WL_CONNECT_FAILED:
                 log_e("[WIFI] Connecting Failed.");
                 break;
             default:
@@ -160,60 +202,3 @@ uint8_t WiFiMulti::run(uint32_t connectTimeout)
 
     return status;
 }
-
-// ##################################################################################
-
-bool WiFiMulti::APlistAdd(const char* ssid, const char *passphrase)
-{
-
-    WifiAPlist_t newAP;
-
-    if(!ssid || *ssid == 0x00 || strlen(ssid) > 31) {
-        // fail SSID to long or missing!
-        log_e("[WIFI][APlistAdd] no ssid or ssid to long");
-        return false;
-    }
-
-    if(passphrase && strlen(passphrase) > 63) {
-        // fail passphrase to long!
-        log_e("[WIFI][APlistAdd] passphrase to long");
-        return false;
-    }
-
-    newAP.ssid = strdup(ssid);
-
-    if(!newAP.ssid) {
-        log_e("[WIFI][APlistAdd] fail newAP.ssid == 0");
-        return false;
-    }
-
-    if(passphrase && *passphrase != 0x00) {
-        newAP.passphrase = strdup(passphrase);
-        if(!newAP.passphrase) {
-            log_e("[WIFI][APlistAdd] fail newAP.passphrase == 0");
-            free(newAP.ssid);
-            return false;
-        }
-    } else {
-        newAP.passphrase = NULL;
-    }
-
-    APlist.push_back(newAP);
-    log_i("[WIFI][APlistAdd] add SSID: %s", newAP.ssid);
-    return true;
-}
-
-void WiFiMulti::APlistClean(void)
-{
-    for(uint32_t i = 0; i < APlist.size(); i++) {
-        WifiAPlist_t entry = APlist[i];
-        if(entry.ssid) {
-            free(entry.ssid);
-        }
-        if(entry.passphrase) {
-            free(entry.passphrase);
-        }
-    }
-    APlist.clear();
-}
-

libraries/WiFi/src/WiFiMulti.h

@@ -46,9 +46,6 @@ public:
 
 private:
     std::vector<WifiAPlist_t> APlist;
-    bool APlistAdd(const char* ssid, const char *passphrase = NULL);
-    void APlistClean(void);
-
 };
 
 #endif /* WIFICLIENTMULTI_H_ */

libraries/WiFi/src/WiFiSTA.cpp

@@ -162,6 +162,8 @@ wl_status_t WiFiSTAClass::begin(const char* ssid, const char *passphrase, int32_
         esp_wifi_set_config(WIFI_IF_STA, &conf);
     } else if(status() == WL_CONNECTED){
         return WL_CONNECTED;
+    } else {
+        esp_wifi_set_config(WIFI_IF_STA, &conf);
     }
 
     if(!_useStaticIp) {
@@ -198,6 +200,12 @@ wl_status_t WiFiSTAClass::begin()
         return WL_CONNECT_FAILED;
     }
 
+    wifi_config_t current_conf;
+    if(esp_wifi_get_config(WIFI_IF_STA, &current_conf) != ESP_OK || esp_wifi_set_config(WIFI_IF_STA, &current_conf) != ESP_OK) {
+        log_e("config failed");
+        return WL_CONNECT_FAILED;
+    }
+
     if(!_useStaticIp) {
         if(tcpip_adapter_dhcpc_start(TCPIP_ADAPTER_IF_STA) == ESP_ERR_TCPIP_ADAPTER_DHCPC_START_FAILED){
             log_e("dhcp client start failed!");
@@ -484,6 +492,48 @@ IPAddress WiFiSTAClass::dnsIP(uint8_t dns_no)
     return IPAddress(dns_ip.u_addr.ip4.addr);
 }
 
+/**
+ * Get the broadcast ip address.
+ * @return IPAddress broadcastIP
+ */
+IPAddress WiFiSTAClass::broadcastIP()
+{
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return IPAddress();
+    }
+    tcpip_adapter_ip_info_t ip;
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_STA, &ip);
+    return WiFiGenericClass::calculateBroadcast(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+/**
+ * Get the network id.
+ * @return IPAddress networkID
+ */
+IPAddress WiFiSTAClass::networkID()
+{
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return IPAddress();
+    }
+    tcpip_adapter_ip_info_t ip;
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_STA, &ip);
+    return WiFiGenericClass::calculateNetworkID(IPAddress(ip.gw.addr), IPAddress(ip.netmask.addr));
+}
+
+/**
+ * Get the subnet CIDR.
+ * @return uint8_t subnetCIDR
+ */
+uint8_t WiFiSTAClass::subnetCIDR()
+{
+    if(WiFiGenericClass::getMode() == WIFI_MODE_NULL){
+        return (uint8_t)0;
+    }
+    tcpip_adapter_ip_info_t ip;
+    tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_STA, &ip);
+    return WiFiGenericClass::calculateSubnetCIDR(IPAddress(ip.netmask.addr));
+}
+
 /**
  * Return the current SSID associated with the network
  * @return SSID

libraries/WiFi/src/WiFiSTA.h

@@ -64,6 +64,10 @@ public:
     IPAddress subnetMask();
     IPAddress gatewayIP();
     IPAddress dnsIP(uint8_t dns_no = 0);
+
+    IPAddress broadcastIP();
+    IPAddress networkID();
+    uint8_t subnetCIDR();
     
     bool enableIpV6();
     IPv6Address localIPv6();

package/merge_packages.py

@@ -36,7 +36,11 @@ def pkgVersionNormalized(versionString):
     verParts = re.split('\.|-rc', verStr, flags=re.IGNORECASE)
     
     if len(verParts) == 3:
-        verStr = str(versionString) + '-rc' + str(sys.maxint)
+        if (sys.version_info > (3, 0)): # Python 3
+            verStr = str(versionString) + '-rc' + str(sys.maxsize)
+        else: # Python 2
+            verStr = str(versionString) + '-rc' + str(sys.maxint)
+        
     elif len(verParts) != 4:
         print("pkgVersionNormalized WARNING: unexpected version format: {0})".format(verStr), file=sys.stderr)
         

package/package_esp32_index.template.json

@@ -27,6 +27,9 @@
             },
             {
               "name": "WEMOS LoLin32"
+            },
+            {
+              "name": "WEMOS D1 MINI ESP32"
             }
           ],
           "toolsDependencies": [

platform.txt

@@ -22,7 +22,7 @@ compiler.warning_flags.all=-Wall -Werror=all -Wextra
 
 compiler.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin/
 compiler.sdk.path={runtime.platform.path}/tools/sdk
-compiler.cpreprocessor.flags=-DESP_PLATFORM -DMBEDTLS_CONFIG_FILE="mbedtls/esp_config.h" -DHAVE_CONFIG_H "-I{compiler.sdk.path}/include/config" "-I{compiler.sdk.path}/include/app_trace" "-I{compiler.sdk.path}/include/app_update" "-I{compiler.sdk.path}/include/asio" "-I{compiler.sdk.path}/include/bootloader_support" "-I{compiler.sdk.path}/include/bt" "-I{compiler.sdk.path}/include/coap" "-I{compiler.sdk.path}/include/console" "-I{compiler.sdk.path}/include/driver" "-I{compiler.sdk.path}/include/esp-tls" "-I{compiler.sdk.path}/include/esp32" "-I{compiler.sdk.path}/include/esp_adc_cal" "-I{compiler.sdk.path}/include/esp_event" "-I{compiler.sdk.path}/include/esp_http_client" "-I{compiler.sdk.path}/include/esp_http_server" "-I{compiler.sdk.path}/include/esp_https_ota" "-I{compiler.sdk.path}/include/esp_ringbuf" "-I{compiler.sdk.path}/include/ethernet" "-I{compiler.sdk.path}/include/expat" "-I{compiler.sdk.path}/include/fatfs" "-I{compiler.sdk.path}/include/freemodbus" "-I{compiler.sdk.path}/include/freertos" "-I{compiler.sdk.path}/include/heap" "-I{compiler.sdk.path}/include/idf_test" "-I{compiler.sdk.path}/include/jsmn" "-I{compiler.sdk.path}/include/json" "-I{compiler.sdk.path}/include/libsodium" "-I{compiler.sdk.path}/include/log" "-I{compiler.sdk.path}/include/lwip" "-I{compiler.sdk.path}/include/mbedtls" "-I{compiler.sdk.path}/include/mdns" "-I{compiler.sdk.path}/include/micro-ecc" "-I{compiler.sdk.path}/include/mqtt" "-I{compiler.sdk.path}/include/newlib" "-I{compiler.sdk.path}/include/nghttp" "-I{compiler.sdk.path}/include/nvs_flash" "-I{compiler.sdk.path}/include/openssl" "-I{compiler.sdk.path}/include/protobuf-c" "-I{compiler.sdk.path}/include/protocomm" "-I{compiler.sdk.path}/include/pthread" "-I{compiler.sdk.path}/include/sdmmc" "-I{compiler.sdk.path}/include/smartconfig_ack" "-I{compiler.sdk.path}/include/soc" "-I{compiler.sdk.path}/include/spi_flash" "-I{compiler.sdk.path}/include/spiffs" "-I{compiler.sdk.path}/include/tcp_transport" "-I{compiler.sdk.path}/include/tcpip_adapter" "-I{compiler.sdk.path}/include/ulp" "-I{compiler.sdk.path}/include/vfs" "-I{compiler.sdk.path}/include/wear_levelling" "-I{compiler.sdk.path}/include/wifi_provisioning" "-I{compiler.sdk.path}/include/wpa_supplicant" "-I{compiler.sdk.path}/include/xtensa-debug-module" "-I{compiler.sdk.path}/include/esp32-camera" "-I{compiler.sdk.path}/include/esp-face" "-I{compiler.sdk.path}/include/fb_gfx"
+compiler.cpreprocessor.flags=-DESP_PLATFORM -DMBEDTLS_CONFIG_FILE="mbedtls/esp_config.h" -DHAVE_CONFIG_H "-I{compiler.sdk.path}/include/config" "-I{compiler.sdk.path}/include/app_trace" "-I{compiler.sdk.path}/include/app_update" "-I{compiler.sdk.path}/include/asio" "-I{compiler.sdk.path}/include/bootloader_support" "-I{compiler.sdk.path}/include/bt" "-I{compiler.sdk.path}/include/coap" "-I{compiler.sdk.path}/include/console" "-I{compiler.sdk.path}/include/driver" "-I{compiler.sdk.path}/include/esp-tls" "-I{compiler.sdk.path}/include/esp32" "-I{compiler.sdk.path}/include/esp_adc_cal" "-I{compiler.sdk.path}/include/esp_event" "-I{compiler.sdk.path}/include/esp_http_client" "-I{compiler.sdk.path}/include/esp_http_server" "-I{compiler.sdk.path}/include/esp_https_ota" "-I{compiler.sdk.path}/include/esp_ringbuf" "-I{compiler.sdk.path}/include/ethernet" "-I{compiler.sdk.path}/include/expat" "-I{compiler.sdk.path}/include/fatfs" "-I{compiler.sdk.path}/include/freemodbus" "-I{compiler.sdk.path}/include/freertos" "-I{compiler.sdk.path}/include/heap" "-I{compiler.sdk.path}/include/idf_test" "-I{compiler.sdk.path}/include/jsmn" "-I{compiler.sdk.path}/include/json" "-I{compiler.sdk.path}/include/libsodium" "-I{compiler.sdk.path}/include/log" "-I{compiler.sdk.path}/include/lwip" "-I{compiler.sdk.path}/include/mbedtls" "-I{compiler.sdk.path}/include/mdns" "-I{compiler.sdk.path}/include/micro-ecc" "-I{compiler.sdk.path}/include/mqtt" "-I{compiler.sdk.path}/include/newlib" "-I{compiler.sdk.path}/include/nghttp" "-I{compiler.sdk.path}/include/nvs_flash" "-I{compiler.sdk.path}/include/openssl" "-I{compiler.sdk.path}/include/protobuf-c" "-I{compiler.sdk.path}/include/protocomm" "-I{compiler.sdk.path}/include/pthread" "-I{compiler.sdk.path}/include/sdmmc" "-I{compiler.sdk.path}/include/smartconfig_ack" "-I{compiler.sdk.path}/include/soc" "-I{compiler.sdk.path}/include/spi_flash" "-I{compiler.sdk.path}/include/spiffs" "-I{compiler.sdk.path}/include/tcp_transport" "-I{compiler.sdk.path}/include/tcpip_adapter" "-I{compiler.sdk.path}/include/ulp" "-I{compiler.sdk.path}/include/vfs" "-I{compiler.sdk.path}/include/wear_levelling" "-I{compiler.sdk.path}/include/wifi_provisioning" "-I{compiler.sdk.path}/include/wpa_supplicant" "-I{compiler.sdk.path}/include/xtensa-debug-module" "-I{compiler.sdk.path}/include/esp-face" "-I{compiler.sdk.path}/include/esp32-camera" "-I{compiler.sdk.path}/include/esp-face" "-I{compiler.sdk.path}/include/fb_gfx"
 
 compiler.c.cmd=xtensa-esp32-elf-gcc
 compiler.c.flags=-std=gnu99 -Os -g3 -fstack-protector -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -nostdlib -Wpointer-arith {compiler.warning_flags} -Wno-error=unused-function -Wno-error=unused-but-set-variable -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-sign-compare -Wno-old-style-declaration -MMD -c
@@ -34,8 +34,8 @@ compiler.S.cmd=xtensa-esp32-elf-gcc
 compiler.S.flags=-c -g3 -x assembler-with-cpp -MMD -mlongcalls
 
 compiler.c.elf.cmd=xtensa-esp32-elf-gcc
-compiler.c.elf.flags=-nostdlib "-L{compiler.sdk.path}/lib" "-L{compiler.sdk.path}/ld" -T esp32_out.ld -T esp32.common.ld -T esp32.rom.ld -T esp32.peripherals.ld -T esp32.rom.spiram_incompatible_fns.ld -u ld_include_panic_highint_hdl -u call_user_start_cpu0 -Wl,--gc-sections -Wl,-static -Wl,--undefined=uxTopUsedPriority  -u __cxa_guard_dummy -u __cxx_fatal_exception
-compiler.c.elf.libs=-lgcc -lopenssl -lbtdm_app -lfatfs -lwps -lcoexist -lwear_levelling -lesp_http_client -lprotobuf-c -lhal -lnewlib -ldriver -lbootloader_support -lpp -lfreemodbus -lmesh -lsmartconfig -ljsmn -lwpa -lethernet -lphy -lfrmn -lapp_trace -lfr_coefficients -lconsole -lulp -lwpa_supplicant -lfreertos -lbt -lmicro-ecc -lesp32-camera -lcxx -lxtensa-debug-module -ltcp_transport -lmdns -lvfs -lmtmn -lesp_ringbuf -lsoc -lcore -lfb_gfx -lsdmmc -llibsodium -lcoap -ltcpip_adapter -lprotocomm -lesp_event -limage_util -lc_nano -lesp-tls -lasio -lrtc -lspi_flash -lwpa2 -lwifi_provisioning -lesp32 -lface_recognition -lapp_update -lnghttp -lspiffs -lface_detection -lespnow -lnvs_flash -lesp_adc_cal -llog -ldl_lib -lsmartconfig_ack -lexpat -lfd_coefficients -lm -lmqtt -lc -lheap -lmbedtls -llwip -lnet80211 -lesp_http_server -lpthread -ljson -lesp_https_ota  -lstdc++
+compiler.c.elf.flags=-nostdlib "-L{compiler.sdk.path}/lib" "-L{compiler.sdk.path}/ld" -T esp32_out.ld -T esp32.common.ld -T esp32.rom.ld -T esp32.peripherals.ld -T esp32.rom.libgcc.ld -T esp32.rom.spiram_incompatible_fns.ld -u ld_include_panic_highint_hdl -u call_user_start_cpu0 -Wl,--gc-sections -Wl,-static -Wl,--undefined=uxTopUsedPriority  -u __cxa_guard_dummy -u __cxx_fatal_exception
+compiler.c.elf.libs=-lgcc -lopenssl -lbtdm_app -lfatfs -lwps -lcoexist -lwear_levelling -lesp_http_client -lprotobuf-c -lhal -lnewlib -ldriver -lbootloader_support -lpp -lfreemodbus -lmesh -lsmartconfig -ljsmn -lwpa -lethernet -lphy -lapp_trace -lconsole -lulp -lwpa_supplicant -lfreertos -lbt -lmicro-ecc -lesp32-camera -lcxx -lxtensa-debug-module -ltcp_transport -lmdns -lvfs -lesp_ringbuf -lsoc -lcore -lfb_gfx -lsdmmc -llibsodium -lcoap -ltcpip_adapter -lprotocomm -lesp_event -limage_util -lc_nano -lesp-tls -lasio -lrtc -lspi_flash -lwpa2 -lwifi_provisioning -lesp32 -lface_recognition -lapp_update -lnghttp -lspiffs -lface_detection -lespnow -lnvs_flash -lesp_adc_cal -llog -ldl_lib -lsmartconfig_ack -lexpat -lm -lfr -lmqtt -lc -lheap -lmbedtls -llwip -lnet80211 -lesp_http_server -lpthread -ljson -lesp_https_ota -lfd  -lstdc++
 
 compiler.as.cmd=xtensa-esp32-elf-as
 

tools/build-tests.sh

@@ -1,54 +0,0 @@
-#!/bin/bash
-
-#- set -e
-
-if [ ! -z "$TRAVIS_TAG" ]; then
-	echo "No sketch builds & tests required for tagged TravisCI builds, exiting"
-	exit 0
-fi
-
-echo -e "travis_fold:start:sketch_test_env_prepare"
-pip install pyserial
-wget -O arduino.tar.xz https://www.arduino.cc/download.php?f=/arduino-nightly-linux64.tar.xz
-tar xf arduino.tar.xz
-mv arduino-nightly $HOME/arduino_ide
-mkdir -p $HOME/Arduino/libraries
-cd $HOME/arduino_ide/hardware
-mkdir espressif
-cd espressif
-ln -s $TRAVIS_BUILD_DIR esp32
-cd esp32
-git submodule update --init --recursive
-cd tools
-python get.py
-cd $TRAVIS_BUILD_DIR
-export PATH="$HOME/arduino_ide:$TRAVIS_BUILD_DIR/tools/xtensa-esp32-elf/bin:$PATH"
-source tools/common.sh
-echo -e "travis_fold:end:sketch_test_env_prepare"
-
-echo -e "travis_fold:start:sketch_test"
-build_sketches $HOME/arduino_ide $TRAVIS_BUILD_DIR/libraries "-l $HOME/Arduino/libraries"
-if [ $? -ne 0 ]; then exit 1; fi
-echo -e "travis_fold:end:sketch_test"
-
-echo -e "travis_fold:start:size_report"
-cat size.log
-echo -e "travis_fold:end:size_report"
-
-echo -e "travis_fold:start:platformio_test_env_prepare"
-pip install -U https://github.com/platformio/platformio/archive/develop.zip && \
-platformio platform install https://github.com/platformio/platform-espressif32.git#feature/stage && \
-sed -i 's/https:\/\/github\.com\/espressif\/arduino-esp32\.git/*/' ~/.platformio/platforms/espressif32/platform.json && \
-ln -s $TRAVIS_BUILD_DIR ~/.platformio/packages/framework-arduinoespressif32
-if [ $? -ne 0 ]; then exit 1; fi
-echo -e "travis_fold:end:platformio_test_env_prepare"
-
-echo -e "travis_fold:start:platformio_test"
-platformio ci  --board esp32dev libraries/WiFi/examples/WiFiClient && \
-platformio ci  --board esp32dev libraries/WiFiClientSecure/examples/WiFiClientSecure && \
-platformio ci  --board esp32dev libraries/BluetoothSerial/examples/SerialToSerialBT && \
-platformio ci  --board esp32dev libraries/BLE/examples/BLE_server && \
-platformio ci  --board esp32dev libraries/AzureIoT/examples/GetStarted && \
-platformio ci  --board esp32dev libraries/ESP32/examples/Camera/CameraWebServer --project-option="board_build.partitions = huge_app.csv"
-if [ $? -ne 0 ]; then exit 1; fi
-echo -e "travis_fold:end:platformio_test"

tools/build.py

@@ -1,131 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-#
-# build.py — build a sketch using arduino-builder
-#
-# Wrapper script around arduino-builder which accepts some ESP8266-specific
-# options and translates them into FQBN
-#
-# Copyright © 2016 Ivan Grokhotkov
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-#
-
-
-from __future__ import print_function
-import sys
-import os
-import argparse
-import subprocess
-import tempfile
-import shutil
-
-def compile(tmp_dir, sketch, tools_dir, hardware_dir, ide_path, f, args):
-    cmd = ide_path + '/arduino-builder '
-    cmd += '-compile -logger=human '
-    cmd += '-build-path "' + tmp_dir + '" '
-    cmd += '-tools "' +  ide_path + '/tools-builder" '
-    if args.library_path:
-        for lib_dir in args.library_path:
-            cmd += '-libraries "' + lib_dir + '" '
-    cmd += '-hardware "' + ide_path + '/hardware" '
-    if args.hardware_dir:
-        for hw_dir in args.hardware_dir:
-            cmd += '-hardware "' + hw_dir + '" '
-    else:
-        cmd += '-hardware "' + hardware_dir + '" '
-    # Debug=Serial,DebugLevel=Core____
-    cmd += '-fqbn=espressif:esp32:{board_name}:' \
-            'FlashFreq={flash_freq},' \
-            'PartitionScheme=huge_app,' \
-            'UploadSpeed=921600'.format(**vars(args))
-    cmd += ' '
-    cmd += '-ide-version=10607 '
-    cmd += '-warnings={warnings} '.format(**vars(args))
-    if args.verbose:
-        cmd += '-verbose '
-    cmd += sketch
-
-    if args.verbose:
-        print('Building: ' + cmd, file=f)
-
-    cmds = cmd.split(' ')
-    p = subprocess.Popen(cmds, stdout=f, stderr=subprocess.STDOUT)
-    p.wait()
-    return p.returncode
-
-def parse_args():
-    parser = argparse.ArgumentParser(description='Sketch build helper')
-    parser.add_argument('-v', '--verbose', help='Enable verbose output',
-                        action='store_true')
-    parser.add_argument('-i', '--ide_path', help='Arduino IDE path')
-    parser.add_argument('-p', '--build_path', help='Build directory')
-    parser.add_argument('-l', '--library_path', help='Additional library path',
-                        action='append')
-    parser.add_argument('-d', '--hardware_dir', help='Additional hardware path',
-                        action='append')
-    parser.add_argument('-b', '--board_name', help='Board name', default='esp32')
-    parser.add_argument('-w', '--warnings', help='Compilation warnings level',
-                        default='none', choices=['none', 'all', 'more'])
-    parser.add_argument('-o', '--output_binary', help='File name for output binary')
-    parser.add_argument('-k', '--keep', action='store_true',
-                        help='Don\'t delete temporary build directory')
-    parser.add_argument('--flash_freq', help='Flash frequency', default=40,
-                        type=int, choices=[40, 80])
-    parser.add_argument('sketch_path', help='Sketch file path')
-    return parser.parse_args()
-
-def main():
-    args = parse_args()
-
-    ide_path = args.ide_path
-    if not ide_path:
-        ide_path = os.environ.get('ARDUINO_IDE_PATH')
-        if not ide_path:
-            print("Please specify Arduino IDE path via --ide_path option"
-                  "or ARDUINO_IDE_PATH environment variable.", file=sys.stderr)
-            return 2
-
-    sketch_path = args.sketch_path
-    tmp_dir = args.build_path
-    created_tmp_dir = False
-    if not tmp_dir:
-        tmp_dir = tempfile.mkdtemp()
-        created_tmp_dir = True
-
-    tools_dir = os.path.dirname(os.path.realpath(__file__)) + '/../tools'
-    # this is not the correct hardware folder to add.
-    hardware_dir = os.path.dirname(os.path.realpath(__file__)) + '/../cores'
-
-    output_name = tmp_dir + '/' + os.path.basename(sketch_path) + '.bin'
-    if args.verbose:
-        print("Sketch: ", sketch_path)
-        print("Build dir: ", tmp_dir)
-        print("Output: ", output_name)
-
-    if args.verbose:
-        f = sys.stdout
-    else:
-        f = open(tmp_dir + '/build.log', 'w')
-
-    res = compile(tmp_dir, sketch_path, tools_dir, hardware_dir, ide_path, f, args)
-    if res != 0:
-        return res
-
-    if args.output_binary is not None:
-        shutil.copy(output_name, args.output_binary)
-
-    if created_tmp_dir and not args.keep:
-        shutil.rmtree(tmp_dir, ignore_errors=True)
-
-if __name__ == '__main__':
-    sys.exit(main())

tools/build.sh

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-if [ ! -z "$TRAVIS_TAG" ]; then
-    # zip the package if tagged build
-    tools/build-release.sh -a$ESP32_GITHUB_TOKEN
-else
-    # run cmake and sketch tests
-    tools/check_cmakelists.sh && tools/build-tests.sh
-fi

tools/ci/build-release.sh

@@ -1,5 +1,10 @@
 #!/bin/bash
 
+if [ -z "$TRAVIS_TAG" ]; then
+	echo "Skipping Packaging: Regular build"
+	exit 0
+fi
+
 ############################################################
 # $1 - download link
 # $2 - JSON output file 

tools/ci/build-tests.sh

@@ -0,0 +1,64 @@
+#!/bin/bash
+
+if [ ! -z "$TRAVIS_TAG" ]; then
+	echo "Skipping Test: Tagged build"
+	exit 0
+fi
+
+CHUNK_INDEX=$1
+CHUNKS_CNT=$2
+BUILD_PIO=0
+if [ "$#" -lt 2 ]; then
+	echo "Building all sketches"
+	CHUNK_INDEX=0
+	CHUNKS_CNT=1
+	BUILD_PIO=1
+fi
+if [ "$CHUNKS_CNT" -le 0 ]; then
+	CHUNK_INDEX=0
+	CHUNKS_CNT=1
+	BUILD_PIO=1
+fi
+if [ "$CHUNK_INDEX" -gt "$CHUNKS_CNT" ]; then
+	CHUNK_INDEX=$CHUNKS_CNT
+fi
+if [ "$CHUNK_INDEX" -eq "$CHUNKS_CNT" ]; then
+	BUILD_PIO=1
+fi
+
+# CMake Test
+if [ "$CHUNK_INDEX" -eq 0 ]; then
+	echo -e "travis_fold:start:check_cmakelists"
+	tools/ci/check-cmakelists.sh
+	if [ $? -ne 0 ]; then exit 1; fi
+	echo -e "travis_fold:end:check_cmakelists"
+fi
+
+if [ "$BUILD_PIO" -eq 0 ]; then
+	# ArduinoIDE Test
+	echo -e "travis_fold:start:prep_arduino_ide"
+	tools/ci/prep-arduino-ide.sh
+	if [ $? -ne 0 ]; then exit 1; fi
+	echo -e "travis_fold:end:prep_arduino_ide"
+
+	echo -e "travis_fold:start:test_arduino_ide"
+	tools/ci/test-arduino-ide.sh $CHUNK_INDEX $CHUNKS_CNT
+	if [ $? -ne 0 ]; then exit 1; fi
+	echo -e "travis_fold:end:test_arduino_ide"
+
+	echo -e "travis_fold:start:size_report"
+	cat size.log
+	echo -e "travis_fold:end:size_report"
+else
+	# PlatformIO Test
+	echo -e "travis_fold:start:prep_platformio"
+	cd tools && python get.py && cd ..
+	tools/ci/prep-platformio.sh
+	if [ $? -ne 0 ]; then exit 1; fi
+	echo -e "travis_fold:end:prep_platformio"
+
+	echo -e "travis_fold:start:test_platformio"
+	tools/ci/test-platformio.sh
+	if [ $? -ne 0 ]; then exit 1; fi
+	echo -e "travis_fold:end:test_platformio"
+fi

tools/ci/check-cmakelists.sh

@@ -10,8 +10,10 @@ set -e
 
 cd "`dirname $0`/.."  # cd to arduino-esp32 root
 
+# pull all submodules
+git submodule update --init --recursive
+
 # find all source files in repo
-#REPO_SRCS=`find cores/esp32/ libraries/ -name 'examples' -prune -o -name 'main.cpp' -prune -o -name '*.c' -print -o -name '*.cpp' -print | sort`
 REPO_SRCS=`find cores/esp32/ libraries/ -name 'examples' -prune -o -name '*.c' -print -o -name '*.cpp' -print | sort`
 
 # find all source files named in CMakeLists.txt COMPONENT_SRCS

tools/ci/prep-arduino-ide.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+pip install pyserial
+wget -O arduino.tar.xz https://www.arduino.cc/download.php?f=/arduino-nightly-linux64.tar.xz
+tar xf arduino.tar.xz
+mv arduino-nightly $HOME/arduino_ide
+mkdir -p $HOME/Arduino/libraries
+mkdir -p $HOME/Arduino/hardware/espressif
+cd $HOME/Arduino/hardware/espressif
+
+ln -s $TRAVIS_BUILD_DIR esp32
+cd esp32/tools
+python get.py

tools/ci/prep-platformio.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+pip install -U https://github.com/platformio/platformio/archive/develop.zip && \
+python -m platformio platform install https://github.com/platformio/platform-espressif32.git#feature/stage && \
+sed -i 's/https:\/\/github\.com\/espressif\/arduino-esp32\.git/*/' ~/.platformio/platforms/espressif32/platform.json && \
+ln -s $TRAVIS_BUILD_DIR ~/.platformio/packages/framework-arduinoespressif32

tools/ci/test-arduino-ide.sh

@@ -0,0 +1,170 @@
+#!/bin/bash
+
+CHUNK_INDEX=$1
+CHUNKS_CNT=$2
+if [ "$#" -lt 2 ]; then
+	echo "Building all sketches"
+	CHUNK_INDEX=0
+	CHUNKS_CNT=1
+fi
+if [ "$CHUNKS_CNT" -le 0 ]; then
+	echo "Chunks count must be positive number"
+	exit 1
+fi
+if [ "$CHUNK_INDEX" -ge "$CHUNKS_CNT" ]; then
+	echo "Chunk index must be less than chunks count"
+	exit 1
+fi
+
+export ARDUINO_BOARD_FQBN="espressif:esp32:esp32:PSRAM=enabled,PartitionScheme=huge_app,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=none"
+
+export ARDUINO_IDE_PATH=$HOME/arduino_ide
+export ARDUINO_USR_PATH=$HOME/Arduino
+
+export EXAMPLES_PATH=$TRAVIS_BUILD_DIR/libraries
+export EXAMPLES_BUILD_DIR=$HOME/build.tmp
+export EXAMPLES_CACHE_DIR=$HOME/cache.tmp
+export EXAMPLES_BUILD_CMD="$ARDUINO_IDE_PATH/arduino-builder -compile -logger=human -core-api-version=\"10810\" -hardware \"$ARDUINO_IDE_PATH/hardware\" -hardware \"$ARDUINO_USR_PATH/hardware\" -tools \"$ARDUINO_IDE_PATH/tools-builder\" -built-in-libraries \"$ARDUINO_IDE_PATH/libraries\" -libraries \"$ARDUINO_USR_PATH/libraries\" -fqbn=$ARDUINO_BOARD_FQBN -warnings=\"all\" -build-cache \"$EXAMPLES_CACHE_DIR\" -build-path \"$EXAMPLES_BUILD_DIR\" -verbose"
+export EXAMPLES_SIZE_BIN=$TRAVIS_BUILD_DIR/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-size
+
+function print_size_info()
+{
+    elf_file=$1
+
+    if [ -z "$elf_file" ]; then
+        printf "sketch                           iram0.text flash.text flash.rodata dram0.data dram0.bss    dram     flash\n"
+        return 0
+    fi
+
+    elf_name=$(basename $elf_file)
+    sketch_name="${elf_name%.*}"
+    # echo $sketch_name
+    declare -A segments
+    while read -a tokens; do
+        seg=${tokens[0]}
+        seg=${seg//./}
+        size=${tokens[1]}
+        addr=${tokens[2]}
+        if [ "$addr" -eq "$addr" -a "$addr" -ne "0" ] 2>/dev/null; then
+            segments[$seg]=$size
+        fi
+    done < <($EXAMPLES_SIZE_BIN --format=sysv $elf_file)
+
+    total_ram=$((${segments[dram0data]} + ${segments[dram0bss]}))
+    total_flash=$((${segments[iram0text]} + ${segments[flashtext]} + ${segments[dram0data]} + ${segments[flashrodata]}))
+    printf "%-32s %-8d   %-8d   %-8d     %-8d   %-8d     %-8d %-8d\n" $sketch_name ${segments[iram0text]} ${segments[flashtext]} ${segments[flashrodata]} ${segments[dram0data]} ${segments[dram0bss]} $total_ram $total_flash
+    return 0
+}
+
+function build_sketch()
+{
+	local sketch=$1
+    echo -e "\n------------ Building $sketch ------------\n";
+    rm -rf $EXAMPLES_BUILD_DIR/*
+    time ($EXAMPLES_BUILD_CMD $sketch >build.log)
+    local result=$?
+    if [ $result -ne 0 ]; then
+        echo "Build failed ($1)"
+        echo "Build log:"
+        cat build.log
+        return $result
+    fi
+    rm build.log
+    return 0
+}
+
+function count_sketches()
+{
+    local sketches=$(find $EXAMPLES_PATH -name *.ino)
+    local sketchnum=0
+    rm -rf sketches.txt
+    for sketch in $sketches; do
+        local sketchdir=$(dirname $sketch)
+        local sketchdirname=$(basename $sketchdir)
+        local sketchname=$(basename $sketch)
+        if [[ "${sketchdirname}.ino" != "$sketchname" ]]; then
+            continue
+        fi;
+        if [[ -f "$sketchdir/.test.skip" ]]; then
+            continue
+        fi
+        echo $sketch >> sketches.txt
+        sketchnum=$(($sketchnum + 1))
+    done
+    return $sketchnum
+}
+
+function build_sketches()
+{
+    mkdir -p $EXAMPLES_BUILD_DIR
+    mkdir -p $EXAMPLES_CACHE_DIR
+    mkdir -p $ARDUINO_USR_PATH/libraries
+    mkdir -p $ARDUINO_USR_PATH/hardware
+    
+    local chunk_idex=$1
+    local chunks_num=$2
+    count_sketches
+    local sketchcount=$?
+    local sketches=$(cat sketches.txt)
+
+    local chunk_size=$(( $sketchcount / $chunks_num ))
+    local all_chunks=$(( $chunks_num * $chunk_size ))
+    if [ "$all_chunks" -lt "$sketchcount" ]; then
+    	chunk_size=$(( $chunk_size + 1 ))
+    fi
+
+    local start_index=$(( $chunk_idex * $chunk_size ))
+    if [ "$sketchcount" -le "$start_index" ]; then
+    	echo "Skipping job"
+    	return 0
+    fi
+
+    local end_index=$(( $(( $chunk_idex + 1 )) * $chunk_size ))
+    if [ "$end_index" -gt "$sketchcount" ]; then
+    	end_index=$sketchcount
+    fi
+
+    local start_num=$(( $start_index + 1 ))
+    #echo -e "Sketches: \n$sketches\n"
+    echo "Found $sketchcount Sketches";
+    echo "Chunk Count : $chunks_num"
+    echo "Chunk Size  : $chunk_size"
+    echo "Start Sketch: $start_num"
+    echo "End Sketch  : $end_index"
+
+    local sketchnum=0
+    print_size_info >size.log
+    for sketch in $sketches; do
+        local sketchdir=$(dirname $sketch)
+        local sketchdirname=$(basename $sketchdir)
+        local sketchname=$(basename $sketch)
+        if [[ "${sketchdirname}.ino" != "$sketchname" ]]; then
+            #echo "Skipping $sketch, beacause it is not the main sketch file";
+            continue
+        fi;
+        if [[ -f "$sketchdir/.test.skip" ]]; then
+            #echo "Skipping $sketch marked";
+            continue
+        fi
+        sketchnum=$(($sketchnum + 1))
+        if [ "$sketchnum" -le "$start_index" ]; then
+        	#echo "Skipping $sketch index low"
+        	continue
+        fi
+        if [ "$sketchnum" -gt "$end_index" ]; then
+        	#echo "Skipping $sketch index high"
+        	continue
+        fi
+        build_sketch $sketch
+        local result=$?
+        if [ $result -ne 0 ]; then
+            return $result
+        fi
+        print_size_info $EXAMPLES_BUILD_DIR/*.elf >>size.log
+    done
+    return 0
+}
+
+build_sketches $CHUNK_INDEX $CHUNKS_CNT
+
+if [ $? -ne 0 ]; then exit 1; fi

tools/ci/test-platformio.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+python -m platformio ci  --board esp32dev libraries/WiFi/examples/WiFiClient && \
+python -m platformio ci  --board esp32dev libraries/WiFiClientSecure/examples/WiFiClientSecure && \
+python -m platformio ci  --board esp32dev libraries/BluetoothSerial/examples/SerialToSerialBT && \
+python -m platformio ci  --board esp32dev libraries/BLE/examples/BLE_server && \
+python -m platformio ci  --board esp32dev libraries/AzureIoT/examples/GetStarted && \
+python -m platformio ci  --board esp32dev libraries/ESP32/examples/Camera/CameraWebServer --project-option="board_build.partitions = huge_app.csv"
+if [ $? -ne 0 ]; then exit 1; fi

tools/common.sh

@@ -1,72 +0,0 @@
-#!/usr/bin/env bash
-
-function print_size_info()
-{
-    elf_file=$1
-
-    if [ -z "$elf_file" ]; then
-        printf "sketch                       iram0.text flash.text flash.rodata dram0.data dram0.bss    dram     flash\n"
-        return 0
-    fi
-
-    elf_name=$(basename $elf_file)
-    sketch_name="${elf_name%.*}"
-    # echo $sketch_name
-    declare -A segments
-    while read -a tokens; do
-        seg=${tokens[0]}
-        seg=${seg//./}
-        size=${tokens[1]}
-        addr=${tokens[2]}
-        if [ "$addr" -eq "$addr" -a "$addr" -ne "0" ] 2>/dev/null; then
-            segments[$seg]=$size
-        fi
-    done < <(xtensa-esp32-elf-size --format=sysv $elf_file)
-
-    total_ram=$((${segments[dram0data]} + ${segments[dram0bss]}))
-    total_flash=$((${segments[iram0text]} + ${segments[flashtext]} + ${segments[dram0data]} + ${segments[flashrodata]}))
-    printf "%-28s %-8d   %-8d   %-8d     %-8d   %-8d     %-8d %-8d\n" $sketch_name ${segments[iram0text]} ${segments[flashtext]} ${segments[flashrodata]} ${segments[dram0data]} ${segments[dram0bss]} $total_ram $total_flash
-    return 0
-}
-
-function build_sketches()
-{
-    #set +e
-    local arduino=$1
-    local srcpath=$2
-    local build_arg=$3
-    local build_dir=build.tmp
-    mkdir -p $build_dir
-    local build_cmd="python tools/build.py -b esp32 -v -k -p $PWD/$build_dir $build_arg "
-    local sketches=$(find $srcpath -name *.ino)
-    print_size_info >size.log
-    export ARDUINO_IDE_PATH=$arduino
-    for sketch in $sketches; do
-        rm -rf $build_dir/*
-        local sketchdir=$(dirname $sketch)
-        local sketchdirname=$(basename $sketchdir)
-        local sketchname=$(basename $sketch)
-        if [[ "${sketchdirname}.ino" != "$sketchname" ]]; then
-            echo "Skipping $sketch, beacause it is not the main sketch file";
-            continue
-        fi;
-        if [[ -f "$sketchdir/.test.skip" ]]; then
-            echo -e "\n ------------ Skipping $sketch ------------ \n";
-            continue
-        fi
-        echo -e "\n ------------ Building $sketch ------------ \n";
-        # $arduino --verify $sketch;
-        #echo "$build_cmd $sketch"
-        time ($build_cmd $sketch >build.log)
-        local result=$?
-        if [ $result -ne 0 ]; then
-            echo "Build failed ($1)"
-            echo "Build log:"
-            cat build.log
-            return $result
-        fi
-        rm build.log
-        print_size_info $build_dir/*.elf >>size.log
-    done
-    #set -e
-}