IDF release/v3.3 cd59d107b (#4708)

Co-authored-by: me-no-dev <me-no-dev@github.com>

.github/workflows/release.yml

@@ -11,6 +11,8 @@ jobs:
 
     steps:
     - uses: actions/checkout@master
+      with:
+        fetch-depth: 0
     - uses: actions/setup-python@v1
       with:
         python-version: '3.x'

.gitignore

@@ -1,9 +1,10 @@
 tools/xtensa-esp32-elf
+tools/xtensa-esp32s2-elf
 tools/dist
 tools/esptool
 tools/esptool.exe
-tools/mkspiffs/mkspiffs
-tools/mkspiffs/mkspiffs.exe
+tools/mkspiffs
+tools/mklittlefs
 .DS_Store
  
 #Ignore files built by Visual Studio/Visual Micro

CMakeLists.txt

@@ -72,11 +72,11 @@ set(LIBRARY_SRCS
   libraries/WiFi/src/WiFi.cpp
   libraries/WiFi/src/WiFiGeneric.cpp
   libraries/WiFi/src/WiFiMulti.cpp
-  libraries/WiFi/src/WiFiProv.cpp
   libraries/WiFi/src/WiFiScan.cpp
   libraries/WiFi/src/WiFiServer.cpp
   libraries/WiFi/src/WiFiSTA.cpp
   libraries/WiFi/src/WiFiUdp.cpp
+  libraries/WiFiProv/src/WiFiProv.cpp
   libraries/Wire/src/Wire.cpp
   )
 
@@ -202,6 +202,7 @@ set(COMPONENT_ADD_INCLUDEDIRS
   libraries/WebServer/src
   libraries/WiFiClientSecure/src
   libraries/WiFi/src
+  libraries/WiFiProv/src
   libraries/Wire/src
   )
 

Kconfig.projbuild

@@ -40,6 +40,12 @@ config ARDUINO_RUNNING_CORE
     default 1 if ARDUINO_RUN_CORE1
     default -1 if ARDUINO_RUN_NO_AFFINITY
 
+config ARDUINO_LOOP_STACK_SIZE
+    int "Loop thread stack size"
+    default 8192
+    help
+        Amount of stack available for the Arduino task.
+
 choice ARDUINO_EVENT_RUNNING_CORE
     bool "Core on which Arduino's event handler is running"
     default ARDUINO_EVENT_RUN_CORE1

boards.txt

@@ -7,6 +7,8 @@ menu.PartitionScheme=Partition Scheme
 menu.DebugLevel=Core Debug Level
 menu.PSRAM=PSRAM
 menu.Revision=Board Revision
+menu.LORAWAN_REGION=LoRaWan Region
+menu.LoRaWanDebugLevel=LoRaWan Debug Level
 
 ##############################################################
 ### DO NOT PUT BOARDS ABOVE THE OFFICIAL ESPRESSIF BOARDS! ###
@@ -3073,74 +3075,29 @@ heltec_wifi_kit_32.serial.disableRTS=true
 heltec_wifi_kit_32.build.mcu=esp32
 heltec_wifi_kit_32.build.core=esp32
 heltec_wifi_kit_32.build.variant=heltec_wifi_kit_32
-heltec_wifi_kit_32.build.board=HELTEC_WIFI_KIT_32
+heltec_wifi_kit_32.build.board=heltec_wifi_kit_32
 
 heltec_wifi_kit_32.build.f_cpu=240000000L
 heltec_wifi_kit_32.build.flash_size=4MB
-heltec_wifi_kit_32.build.flash_freq=40m
+heltec_wifi_kit_32.build.flash_freq=80m
 heltec_wifi_kit_32.build.flash_mode=dio
 heltec_wifi_kit_32.build.boot=dio
 heltec_wifi_kit_32.build.partitions=default
 heltec_wifi_kit_32.build.defines=
+heltec_wifi_kit_32.build.band=LoRaWAN_NONE
+heltec_wifi_kit_32.build.LoRaWanDebugLevel=0
 
 heltec_wifi_kit_32.menu.PSRAM.disabled=Disabled
 heltec_wifi_kit_32.menu.PSRAM.disabled.build.defines=
 heltec_wifi_kit_32.menu.PSRAM.enabled=Enabled
 heltec_wifi_kit_32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
 
-heltec_wifi_kit_32.menu.PartitionScheme.default=Default
-heltec_wifi_kit_32.menu.PartitionScheme.default.build.partitions=default
-heltec_wifi_kit_32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
-heltec_wifi_kit_32.menu.PartitionScheme.minimal.build.partitions=minimal
-heltec_wifi_kit_32.menu.PartitionScheme.no_ota=No OTA (Large APP)
-heltec_wifi_kit_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
-heltec_wifi_kit_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
-heltec_wifi_kit_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
-heltec_wifi_kit_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
-heltec_wifi_kit_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
-heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
-heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
-heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
-heltec_wifi_kit_32.menu.PartitionScheme.fatflash=16M Fat
-heltec_wifi_kit_32.menu.PartitionScheme.fatflash.build.partitions=ffat
-
 heltec_wifi_kit_32.menu.CPUFreq.240=240MHz (WiFi/BT)
 heltec_wifi_kit_32.menu.CPUFreq.240.build.f_cpu=240000000L
 heltec_wifi_kit_32.menu.CPUFreq.160=160MHz (WiFi/BT)
 heltec_wifi_kit_32.menu.CPUFreq.160.build.f_cpu=160000000L
 heltec_wifi_kit_32.menu.CPUFreq.80=80MHz (WiFi/BT)
 heltec_wifi_kit_32.menu.CPUFreq.80.build.f_cpu=80000000L
-heltec_wifi_kit_32.menu.CPUFreq.26=26MHz (26MHz XTAL)
-heltec_wifi_kit_32.menu.CPUFreq.26.build.f_cpu=26000000L
-heltec_wifi_kit_32.menu.CPUFreq.13=13MHz (26MHz XTAL)
-heltec_wifi_kit_32.menu.CPUFreq.13.build.f_cpu=13000000L
-
-heltec_wifi_kit_32.menu.FlashMode.qio=QIO
-heltec_wifi_kit_32.menu.FlashMode.qio.build.flash_mode=dio
-heltec_wifi_kit_32.menu.FlashMode.qio.build.boot=qio
-heltec_wifi_kit_32.menu.FlashMode.dio=DIO
-heltec_wifi_kit_32.menu.FlashMode.dio.build.flash_mode=dio
-heltec_wifi_kit_32.menu.FlashMode.dio.build.boot=dio
-heltec_wifi_kit_32.menu.FlashMode.qout=QOUT
-heltec_wifi_kit_32.menu.FlashMode.qout.build.flash_mode=dout
-heltec_wifi_kit_32.menu.FlashMode.qout.build.boot=qout
-heltec_wifi_kit_32.menu.FlashMode.dout=DOUT
-heltec_wifi_kit_32.menu.FlashMode.dout.build.flash_mode=dout
-heltec_wifi_kit_32.menu.FlashMode.dout.build.boot=dout
-
-heltec_wifi_kit_32.menu.FlashFreq.40=40MHz
-heltec_wifi_kit_32.menu.FlashFreq.40.build.flash_freq=40m
-heltec_wifi_kit_32.menu.FlashFreq.80=80MHz
-heltec_wifi_kit_32.menu.FlashFreq.80.build.flash_freq=80m
-
-heltec_wifi_kit_32.menu.FlashSize.4M=4MB (32Mb)
-heltec_wifi_kit_32.menu.FlashSize.4M.build.flash_size=4MB
-heltec_wifi_kit_32.menu.FlashSize.2M=2MB (16Mb)
-heltec_wifi_kit_32.menu.FlashSize.2M.build.flash_size=2MB
-heltec_wifi_kit_32.menu.FlashSize.2M.build.partitions=minimal
-heltec_wifi_kit_32.menu.FlashSize.16M=16MB (128Mb)
-heltec_wifi_kit_32.menu.FlashSize.16M.build.flash_size=16MB
-heltec_wifi_kit_32.menu.FlashSize.16M.build.partitions=ffat
 
 heltec_wifi_kit_32.menu.UploadSpeed.921600=921600
 heltec_wifi_kit_32.menu.UploadSpeed.921600.upload.speed=921600
@@ -3185,74 +3142,27 @@ heltec_wifi_lora_32.serial.disableRTS=true
 heltec_wifi_lora_32.build.mcu=esp32
 heltec_wifi_lora_32.build.core=esp32
 heltec_wifi_lora_32.build.variant=heltec_wifi_lora_32
-heltec_wifi_lora_32.build.board=HELTEC_WIFI_LORA_32
+heltec_wifi_lora_32.build.board=heltec_wifi_lora_32
 
 heltec_wifi_lora_32.build.f_cpu=240000000L
 heltec_wifi_lora_32.build.flash_size=4MB
-heltec_wifi_lora_32.build.flash_freq=40m
+heltec_wifi_lora_32.build.flash_freq=80m
 heltec_wifi_lora_32.build.flash_mode=dio
 heltec_wifi_lora_32.build.boot=dio
 heltec_wifi_lora_32.build.partitions=default
-heltec_wifi_lora_32.build.defines=
+heltec_wifi_lora_32.build.defines=-D{build.band} -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} {build.psram}
 
 heltec_wifi_lora_32.menu.PSRAM.disabled=Disabled
-heltec_wifi_lora_32.menu.PSRAM.disabled.build.defines=
+heltec_wifi_lora_32.menu.PSRAM.disabled.build.psram=
 heltec_wifi_lora_32.menu.PSRAM.enabled=Enabled
-heltec_wifi_lora_32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
-
-heltec_wifi_lora_32.menu.PartitionScheme.default=Default
-heltec_wifi_lora_32.menu.PartitionScheme.default.build.partitions=default
-heltec_wifi_lora_32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
-heltec_wifi_lora_32.menu.PartitionScheme.minimal.build.partitions=minimal
-heltec_wifi_lora_32.menu.PartitionScheme.no_ota=No OTA (Large APP)
-heltec_wifi_lora_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
-heltec_wifi_lora_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
-heltec_wifi_lora_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
-heltec_wifi_lora_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
-heltec_wifi_lora_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
-heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
-heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
-heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
-heltec_wifi_lora_32.menu.PartitionScheme.fatflash=16M Fat
-heltec_wifi_lora_32.menu.PartitionScheme.fatflash.build.partitions=ffat
+heltec_wifi_lora_32.menu.PSRAM.enabled.build.psram=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
 
 heltec_wifi_lora_32.menu.CPUFreq.240=240MHz (WiFi/BT)
 heltec_wifi_lora_32.menu.CPUFreq.240.build.f_cpu=240000000L
 heltec_wifi_lora_32.menu.CPUFreq.160=160MHz (WiFi/BT)
 heltec_wifi_lora_32.menu.CPUFreq.160.build.f_cpu=160000000L
 heltec_wifi_lora_32.menu.CPUFreq.80=80MHz (WiFi/BT)
-heltec_wifi_lora_32.menu.CPUFreq.80.build.f_cpu=80000000L
-heltec_wifi_lora_32.menu.CPUFreq.26=26MHz (26MHz XTAL)
-heltec_wifi_lora_32.menu.CPUFreq.26.build.f_cpu=26000000L
-heltec_wifi_lora_32.menu.CPUFreq.13=13MHz (26MHz XTAL)
-heltec_wifi_lora_32.menu.CPUFreq.13.build.f_cpu=13000000L
-
-heltec_wifi_lora_32.menu.FlashMode.qio=QIO
-heltec_wifi_lora_32.menu.FlashMode.qio.build.flash_mode=dio
-heltec_wifi_lora_32.menu.FlashMode.qio.build.boot=qio
-heltec_wifi_lora_32.menu.FlashMode.dio=DIO
-heltec_wifi_lora_32.menu.FlashMode.dio.build.flash_mode=dio
-heltec_wifi_lora_32.menu.FlashMode.dio.build.boot=dio
-heltec_wifi_lora_32.menu.FlashMode.qout=QOUT
-heltec_wifi_lora_32.menu.FlashMode.qout.build.flash_mode=dout
-heltec_wifi_lora_32.menu.FlashMode.qout.build.boot=qout
-heltec_wifi_lora_32.menu.FlashMode.dout=DOUT
-heltec_wifi_lora_32.menu.FlashMode.dout.build.flash_mode=dout
-heltec_wifi_lora_32.menu.FlashMode.dout.build.boot=dout
-
-heltec_wifi_lora_32.menu.FlashFreq.40=40MHz
-heltec_wifi_lora_32.menu.FlashFreq.40.build.flash_freq=40m
-heltec_wifi_lora_32.menu.FlashFreq.80=80MHz
-heltec_wifi_lora_32.menu.FlashFreq.80.build.flash_freq=80m
-
-heltec_wifi_lora_32.menu.FlashSize.4M=4MB (32Mb)
-heltec_wifi_lora_32.menu.FlashSize.4M.build.flash_size=4MB
-heltec_wifi_lora_32.menu.FlashSize.2M=2MB (16Mb)
-heltec_wifi_lora_32.menu.FlashSize.2M.build.flash_size=2MB
-heltec_wifi_lora_32.menu.FlashSize.2M.build.partitions=minimal
-heltec_wifi_lora_32.menu.FlashSize.16M=16MB (128Mb)
-heltec_wifi_lora_32.menu.FlashSize.16M.build.flash_size=16MB
-heltec_wifi_lora_32.menu.FlashSize.16M.build.partitions=ffat
+heltec_wifi_lora_32.menu.CPUFreq.160.build.f_cpu=80000000L
 
 heltec_wifi_lora_32.menu.UploadSpeed.921600=921600
 heltec_wifi_lora_32.menu.UploadSpeed.921600.upload.speed=921600
@@ -3282,12 +3192,42 @@ heltec_wifi_lora_32.menu.DebugLevel.debug.build.code_debug=4
 heltec_wifi_lora_32.menu.DebugLevel.verbose=Verbose
 heltec_wifi_lora_32.menu.DebugLevel.verbose.build.code_debug=5
 
+heltec_wifi_lora_32.menu.LORAWAN_REGION.0=REGION_EU868
+heltec_wifi_lora_32.menu.LORAWAN_REGION.0.build.band=REGION_EU868
+heltec_wifi_lora_32.menu.LORAWAN_REGION.1=REGION_EU433
+heltec_wifi_lora_32.menu.LORAWAN_REGION.1.build.band=REGION_EU433
+heltec_wifi_lora_32.menu.LORAWAN_REGION.2=REGION_CN470
+heltec_wifi_lora_32.menu.LORAWAN_REGION.2.build.band=REGION_CN470
+heltec_wifi_lora_32.menu.LORAWAN_REGION.3=REGION_US915
+heltec_wifi_lora_32.menu.LORAWAN_REGION.3.build.band=REGION_US915
+heltec_wifi_lora_32.menu.LORAWAN_REGION.4=REGION_AU915
+heltec_wifi_lora_32.menu.LORAWAN_REGION.4.build.band=REGION_AU915
+heltec_wifi_lora_32.menu.LORAWAN_REGION.5=REGION_CN779
+heltec_wifi_lora_32.menu.LORAWAN_REGION.5.build.band=REGION_CN779
+heltec_wifi_lora_32.menu.LORAWAN_REGION.6=REGION_AS923
+heltec_wifi_lora_32.menu.LORAWAN_REGION.6.build.band=REGION_AS923
+heltec_wifi_lora_32.menu.LORAWAN_REGION.7=REGION_KR920
+heltec_wifi_lora_32.menu.LORAWAN_REGION.7.build.band=REGION_KR920
+heltec_wifi_lora_32.menu.LORAWAN_REGION.8=REGION_IN865
+heltec_wifi_lora_32.menu.LORAWAN_REGION.8.build.band=REGION_IN865
+heltec_wifi_lora_32.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
+heltec_wifi_lora_32.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
+
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.0=None
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.1=Freq
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.2=Freq && DIO
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
+heltec_wifi_lora_32.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
+
 ##############################################################
 
 heltec_wifi_lora_32_V2.name=Heltec WiFi LoRa 32(V2)
 
 heltec_wifi_lora_32_V2.upload.tool=esptool_py
-heltec_wifi_lora_32_V2.upload.maximum_size=1310720
+heltec_wifi_lora_32_V2.upload.maximum_size=3342336
 heltec_wifi_lora_32_V2.upload.maximum_data_size=327680
 heltec_wifi_lora_32_V2.upload.wait_for_upload_port=true
 
@@ -3297,37 +3237,20 @@ heltec_wifi_lora_32_V2.serial.disableRTS=true
 heltec_wifi_lora_32_V2.build.mcu=esp32
 heltec_wifi_lora_32_V2.build.core=esp32
 heltec_wifi_lora_32_V2.build.variant=heltec_wifi_lora_32_V2
-heltec_wifi_lora_32_V2.build.board=HELTEC_WIFI_LORA_32_V2
+heltec_wifi_lora_32_V2.build.board=heltec_wifi_lora_32_V2
 
 heltec_wifi_lora_32_V2.build.f_cpu=240000000L
 heltec_wifi_lora_32_V2.build.flash_size=8MB
-heltec_wifi_lora_32_V2.build.flash_freq=40m
+heltec_wifi_lora_32_V2.build.flash_freq=80m
 heltec_wifi_lora_32_V2.build.flash_mode=dio
-heltec_wifi_lora_32_V2.build.boot=dio
+heltec_wifi_lora_32_V2.build.boot=qio
 heltec_wifi_lora_32_V2.build.partitions=default_8MB
-heltec_wifi_lora_32_V2.build.defines=
+heltec_wifi_lora_32_V2.build.defines=-D{build.band} -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} {build.psram}
 
 heltec_wifi_lora_32_V2.menu.PSRAM.disabled=Disabled
-heltec_wifi_lora_32_V2.menu.PSRAM.disabled.build.defines=
+heltec_wifi_lora_32_V2.menu.PSRAM.disabled.build.psram=
 heltec_wifi_lora_32_V2.menu.PSRAM.enabled=Enabled
-heltec_wifi_lora_32_V2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
-
-heltec_wifi_lora_32_V2.menu.PartitionScheme.default=default_8MB
-heltec_wifi_lora_32_V2.menu.PartitionScheme.default.build.partitions=default_8MB
-heltec_wifi_lora_32_V2.menu.PartitionScheme.default.upload.maximum_size=3342336
-heltec_wifi_lora_32_V2.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
-heltec_wifi_lora_32_V2.menu.PartitionScheme.minimal.build.partitions=minimal
-heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota=No OTA (Large APP)
-heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota.build.partitions=no_ota
-heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
-heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
-heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app.build.partitions=huge_app
-heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
-heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
-heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
-heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
-heltec_wifi_lora_32_V2.menu.PartitionScheme.fatflash=16M Fat
-heltec_wifi_lora_32_V2.menu.PartitionScheme.fatflash.build.partitions=ffat
+heltec_wifi_lora_32_V2.menu.PSRAM.enabled.build.psram=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
 
 heltec_wifi_lora_32_V2.menu.CPUFreq.240=240MHz (WiFi/BT)
 heltec_wifi_lora_32_V2.menu.CPUFreq.240.build.f_cpu=240000000L
@@ -3335,42 +3258,6 @@ heltec_wifi_lora_32_V2.menu.CPUFreq.160=160MHz (WiFi/BT)
 heltec_wifi_lora_32_V2.menu.CPUFreq.160.build.f_cpu=160000000L
 heltec_wifi_lora_32_V2.menu.CPUFreq.80=80MHz (WiFi/BT)
 heltec_wifi_lora_32_V2.menu.CPUFreq.80.build.f_cpu=80000000L
-heltec_wifi_lora_32_V2.menu.CPUFreq.40=40MHz (40MHz XTAL)
-heltec_wifi_lora_32_V2.menu.CPUFreq.40.build.f_cpu=40000000L
-heltec_wifi_lora_32_V2.menu.CPUFreq.20=20MHz (40MHz XTAL)
-heltec_wifi_lora_32_V2.menu.CPUFreq.20.build.f_cpu=20000000L
-heltec_wifi_lora_32_V2.menu.CPUFreq.10=10MHz (40MHz XTAL)
-heltec_wifi_lora_32_V2.menu.CPUFreq.10.build.f_cpu=10000000L
-
-heltec_wifi_lora_32_V2.menu.FlashMode.qio=QIO
-heltec_wifi_lora_32_V2.menu.FlashMode.qio.build.flash_mode=dio
-heltec_wifi_lora_32_V2.menu.FlashMode.qio.build.boot=qio
-heltec_wifi_lora_32_V2.menu.FlashMode.dio=DIO
-heltec_wifi_lora_32_V2.menu.FlashMode.dio.build.flash_mode=dio
-heltec_wifi_lora_32_V2.menu.FlashMode.dio.build.boot=dio
-heltec_wifi_lora_32_V2.menu.FlashMode.qout=QOUT
-heltec_wifi_lora_32_V2.menu.FlashMode.qout.build.flash_mode=dout
-heltec_wifi_lora_32_V2.menu.FlashMode.qout.build.boot=qout
-heltec_wifi_lora_32_V2.menu.FlashMode.dout=DOUT
-heltec_wifi_lora_32_V2.menu.FlashMode.dout.build.flash_mode=dout
-heltec_wifi_lora_32_V2.menu.FlashMode.dout.build.boot=dout
-
-heltec_wifi_lora_32_V2.menu.FlashFreq.80=80MHz
-heltec_wifi_lora_32_V2.menu.FlashFreq.80.build.flash_freq=80m
-heltec_wifi_lora_32_V2.menu.FlashFreq.40=40MHz
-heltec_wifi_lora_32_V2.menu.FlashFreq.40.build.flash_freq=40m
-
-heltec_wifi_lora_32_V2.menu.FlashSize.8M=8MB (64Mb)
-heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.flash_size=8MB
-heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.partitions=default_8MB
-heltec_wifi_lora_32_V2.menu.FlashSize.4M=4MB (32Mb)
-heltec_wifi_lora_32_V2.menu.FlashSize.4M.build.flash_size=4MB
-heltec_wifi_lora_32_V2.menu.FlashSize.2M=2MB (16Mb)
-heltec_wifi_lora_32_V2.menu.FlashSize.2M.build.flash_size=2MB
-heltec_wifi_lora_32_V2.menu.FlashSize.2M.build.partitions=minimal
-heltec_wifi_lora_32_V2.menu.FlashSize.16M=16MB (128Mb)
-heltec_wifi_lora_32_V2.menu.FlashSize.16M.build.flash_size=16MB
-heltec_wifi_lora_32_V2.menu.FlashSize.16M.build.partitions=ffat
 
 heltec_wifi_lora_32_V2.menu.UploadSpeed.921600=921600
 heltec_wifi_lora_32_V2.menu.UploadSpeed.921600.upload.speed=921600
@@ -3400,12 +3287,42 @@ heltec_wifi_lora_32_V2.menu.DebugLevel.debug.build.code_debug=4
 heltec_wifi_lora_32_V2.menu.DebugLevel.verbose=Verbose
 heltec_wifi_lora_32_V2.menu.DebugLevel.verbose.build.code_debug=5
 
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.0=REGION_EU868
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.0.build.band=REGION_EU868
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.1=REGION_EU433
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.1.build.band=REGION_EU433
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.2=REGION_CN470
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.2.build.band=REGION_CN470
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.3=REGION_US915
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.3.build.band=REGION_US915
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.4=REGION_AU915
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.4.build.band=REGION_AU915
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.5=REGION_CN779
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.5.build.band=REGION_CN779
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.6=REGION_AS923
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.6.build.band=REGION_AS923
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.7=REGION_KR920
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.7.build.band=REGION_KR920
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.8=REGION_IN865
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.8.build.band=REGION_IN865
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
+heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
+
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.0=None
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.1=Freq
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.2=Freq && DIO
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
+heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
+
 ##############################################################
 
 heltec_wireless_stick.name=Heltec Wireless Stick
 
 heltec_wireless_stick.upload.tool=esptool_py
-heltec_wireless_stick.upload.maximum_size=1310720
+heltec_wireless_stick.upload.maximum_size=3342336
 heltec_wireless_stick.upload.maximum_data_size=327680
 heltec_wireless_stick.upload.wait_for_upload_port=true
 
@@ -3415,37 +3332,20 @@ heltec_wireless_stick.serial.disableRTS=true
 heltec_wireless_stick.build.mcu=esp32
 heltec_wireless_stick.build.core=esp32
 heltec_wireless_stick.build.variant=heltec_wireless_stick
-heltec_wireless_stick.build.board=HELTEC_WIRELESS_STICK
+heltec_wireless_stick.build.board=heltec_wireless_stick
 
 heltec_wireless_stick.build.f_cpu=240000000L
 heltec_wireless_stick.build.flash_size=8MB
-heltec_wireless_stick.build.flash_freq=40m
+heltec_wireless_stick.build.flash_freq=80m
 heltec_wireless_stick.build.flash_mode=dio
 heltec_wireless_stick.build.boot=dio
 heltec_wireless_stick.build.partitions=default_8MB
-heltec_wireless_stick.build.defines=
+heltec_wireless_stick.build.defines=-D{build.band} -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} {build.psram}
 
 heltec_wireless_stick.menu.PSRAM.disabled=Disabled
-heltec_wireless_stick.menu.PSRAM.disabled.build.defines=
+heltec_wireless_stick.menu.PSRAM.disabled.build.psram=
 heltec_wireless_stick.menu.PSRAM.enabled=Enabled
-heltec_wireless_stick.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
-
-heltec_wireless_stick.menu.PartitionScheme.default=default_8MB
-heltec_wireless_stick.menu.PartitionScheme.default.build.partitions=default_8MB
-heltec_wireless_stick.menu.PartitionScheme.default.upload.maximum_size=3342336
-heltec_wireless_stick.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
-heltec_wireless_stick.menu.PartitionScheme.minimal.build.partitions=minimal
-heltec_wireless_stick.menu.PartitionScheme.no_ota=No OTA (Large APP)
-heltec_wireless_stick.menu.PartitionScheme.no_ota.build.partitions=no_ota
-heltec_wireless_stick.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
-heltec_wireless_stick.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
-heltec_wireless_stick.menu.PartitionScheme.huge_app.build.partitions=huge_app
-heltec_wireless_stick.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
-heltec_wireless_stick.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
-heltec_wireless_stick.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
-heltec_wireless_stick.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
-heltec_wireless_stick.menu.PartitionScheme.fatflash=16M Fat
-heltec_wireless_stick.menu.PartitionScheme.fatflash.build.partitions=ffat
+heltec_wireless_stick.menu.PSRAM.enabled.build.psram=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
 
 heltec_wireless_stick.menu.CPUFreq.240=240MHz (WiFi/BT)
 heltec_wireless_stick.menu.CPUFreq.240.build.f_cpu=240000000L
@@ -3453,42 +3353,6 @@ heltec_wireless_stick.menu.CPUFreq.160=160MHz (WiFi/BT)
 heltec_wireless_stick.menu.CPUFreq.160.build.f_cpu=160000000L
 heltec_wireless_stick.menu.CPUFreq.80=80MHz (WiFi/BT)
 heltec_wireless_stick.menu.CPUFreq.80.build.f_cpu=80000000L
-heltec_wireless_stick.menu.CPUFreq.40=40MHz (40MHz XTAL)
-heltec_wireless_stick.menu.CPUFreq.40.build.f_cpu=40000000L
-heltec_wireless_stick.menu.CPUFreq.20=20MHz (40MHz XTAL)
-heltec_wireless_stick.menu.CPUFreq.20.build.f_cpu=20000000L
-heltec_wireless_stick.menu.CPUFreq.10=10MHz (40MHz XTAL)
-heltec_wireless_stick.menu.CPUFreq.10.build.f_cpu=10000000L
-
-heltec_wireless_stick.menu.FlashMode.qio=QIO
-heltec_wireless_stick.menu.FlashMode.qio.build.flash_mode=dio
-heltec_wireless_stick.menu.FlashMode.qio.build.boot=qio
-heltec_wireless_stick.menu.FlashMode.dio=DIO
-heltec_wireless_stick.menu.FlashMode.dio.build.flash_mode=dio
-heltec_wireless_stick.menu.FlashMode.dio.build.boot=dio
-heltec_wireless_stick.menu.FlashMode.qout=QOUT
-heltec_wireless_stick.menu.FlashMode.qout.build.flash_mode=dout
-heltec_wireless_stick.menu.FlashMode.qout.build.boot=qout
-heltec_wireless_stick.menu.FlashMode.dout=DOUT
-heltec_wireless_stick.menu.FlashMode.dout.build.flash_mode=dout
-heltec_wireless_stick.menu.FlashMode.dout.build.boot=dout
-
-heltec_wireless_stick.menu.FlashFreq.80=80MHz
-heltec_wireless_stick.menu.FlashFreq.80.build.flash_freq=80m
-heltec_wireless_stick.menu.FlashFreq.40=40MHz
-heltec_wireless_stick.menu.FlashFreq.40.build.flash_freq=40m
-
-heltec_wireless_stick.menu.FlashSize.8M=8MB (64Mb)
-heltec_wireless_stick.menu.FlashSize.8M.build.flash_size=8MB
-heltec_wireless_stick.menu.FlashSize.2M.build.partitions=default_8MB
-heltec_wireless_stick.menu.FlashSize.4M=4MB (32Mb)
-heltec_wireless_stick.menu.FlashSize.4M.build.flash_size=4MB
-heltec_wireless_stick.menu.FlashSize.2M=2MB (16Mb)
-heltec_wireless_stick.menu.FlashSize.2M.build.flash_size=2MB
-heltec_wireless_stick.menu.FlashSize.2M.build.partitions=minimal
-heltec_wireless_stick.menu.FlashSize.16M=16MB (128Mb)
-heltec_wireless_stick.menu.FlashSize.16M.build.flash_size=16MB
-heltec_wireless_stick.menu.FlashSize.16M.build.partitions=ffat
 
 heltec_wireless_stick.menu.UploadSpeed.921600=921600
 heltec_wireless_stick.menu.UploadSpeed.921600.upload.speed=921600
@@ -3518,6 +3382,131 @@ heltec_wireless_stick.menu.DebugLevel.debug.build.code_debug=4
 heltec_wireless_stick.menu.DebugLevel.verbose=Verbose
 heltec_wireless_stick.menu.DebugLevel.verbose.build.code_debug=5
 
+heltec_wireless_stick.menu.LORAWAN_REGION.0=REGION_EU868
+heltec_wireless_stick.menu.LORAWAN_REGION.0.build.band=REGION_EU868
+heltec_wireless_stick.menu.LORAWAN_REGION.1=REGION_EU433
+heltec_wireless_stick.menu.LORAWAN_REGION.1.build.band=REGION_EU433
+heltec_wireless_stick.menu.LORAWAN_REGION.2=REGION_CN470
+heltec_wireless_stick.menu.LORAWAN_REGION.2.build.band=REGION_CN470
+heltec_wireless_stick.menu.LORAWAN_REGION.3=REGION_US915
+heltec_wireless_stick.menu.LORAWAN_REGION.3.build.band=REGION_US915
+heltec_wireless_stick.menu.LORAWAN_REGION.4=REGION_AU915
+heltec_wireless_stick.menu.LORAWAN_REGION.4.build.band=REGION_AU915
+heltec_wireless_stick.menu.LORAWAN_REGION.5=REGION_CN779
+heltec_wireless_stick.menu.LORAWAN_REGION.5.build.band=REGION_CN779
+heltec_wireless_stick.menu.LORAWAN_REGION.6=REGION_AS923
+heltec_wireless_stick.menu.LORAWAN_REGION.6.build.band=REGION_AS923
+heltec_wireless_stick.menu.LORAWAN_REGION.7=REGION_KR920
+heltec_wireless_stick.menu.LORAWAN_REGION.7.build.band=REGION_KR920
+heltec_wireless_stick.menu.LORAWAN_REGION.8=REGION_IN865
+heltec_wireless_stick.menu.LORAWAN_REGION.8.build.band=REGION_IN865
+heltec_wireless_stick.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
+heltec_wireless_stick.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
+
+heltec_wireless_stick.menu.LoRaWanDebugLevel.0=None
+heltec_wireless_stick.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
+heltec_wireless_stick.menu.LoRaWanDebugLevel.1=Freq
+heltec_wireless_stick.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
+heltec_wireless_stick.menu.LoRaWanDebugLevel.2=Freq && DIO
+heltec_wireless_stick.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
+heltec_wireless_stick.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
+heltec_wireless_stick.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
+
+##############################################################
+
+heltec_wireless_stick_lite.name=Heltec Wireless Stick Lite
+
+heltec_wireless_stick_lite.upload.tool=esptool_py
+heltec_wireless_stick_lite.upload.maximum_size=1310720
+heltec_wireless_stick_lite.upload.maximum_data_size=327680
+heltec_wireless_stick_lite.upload.wait_for_upload_port=true
+
+heltec_wireless_stick_lite.serial.disableDTR=true
+heltec_wireless_stick_lite.serial.disableRTS=true
+
+heltec_wireless_stick_lite.build.mcu=esp32
+heltec_wireless_stick_lite.build.core=esp32
+heltec_wireless_stick_lite.build.variant=heltec_wireless_stick_lite
+heltec_wireless_stick_lite.build.board=heltec_wireless_stick_LITE
+
+heltec_wireless_stick_lite.build.f_cpu=240000000L
+heltec_wireless_stick_lite.build.flash_size=4MB
+heltec_wireless_stick_lite.build.flash_freq=80m
+heltec_wireless_stick_lite.build.flash_mode=dio
+heltec_wireless_stick_lite.build.boot=dio
+heltec_wireless_stick_lite.build.partitions=default
+heltec_wireless_stick_lite.build.defines=-D{build.band} -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} {build.psram}
+
+heltec_wireless_stick_lite.menu.PSRAM.disabled=Disabled
+heltec_wireless_stick_lite.menu.PSRAM.disabled.build.psram=
+heltec_wireless_stick_lite.menu.PSRAM.enabled=Enabled
+heltec_wireless_stick_lite.menu.PSRAM.enabled.build.psram=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
+
+heltec_wireless_stick_lite.menu.CPUFreq.240=240MHz (WiFi/BT)
+heltec_wireless_stick_lite.menu.CPUFreq.240.build.f_cpu=240000000L
+heltec_wireless_stick_lite.menu.CPUFreq.160=160MHz (WiFi/BT)
+heltec_wireless_stick_lite.menu.CPUFreq.160.build.f_cpu=160000000L
+heltec_wireless_stick_lite.menu.CPUFreq.80=80MHz (WiFi/BT)
+heltec_wireless_stick_lite.menu.CPUFreq.80.build.f_cpu=80000000L
+
+heltec_wireless_stick_lite.menu.UploadSpeed.921600=921600
+heltec_wireless_stick_lite.menu.UploadSpeed.921600.upload.speed=921600
+heltec_wireless_stick_lite.menu.UploadSpeed.115200=115200
+heltec_wireless_stick_lite.menu.UploadSpeed.115200.upload.speed=115200
+heltec_wireless_stick_lite.menu.UploadSpeed.256000.windows=256000
+heltec_wireless_stick_lite.menu.UploadSpeed.256000.upload.speed=256000
+heltec_wireless_stick_lite.menu.UploadSpeed.230400.windows.upload.speed=256000
+heltec_wireless_stick_lite.menu.UploadSpeed.230400=230400
+heltec_wireless_stick_lite.menu.UploadSpeed.230400.upload.speed=230400
+heltec_wireless_stick_lite.menu.UploadSpeed.460800.linux=460800
+heltec_wireless_stick_lite.menu.UploadSpeed.460800.macosx=460800
+heltec_wireless_stick_lite.menu.UploadSpeed.460800.upload.speed=460800
+heltec_wireless_stick_lite.menu.UploadSpeed.512000.windows=512000
+heltec_wireless_stick_lite.menu.UploadSpeed.512000.upload.speed=512000
+
+heltec_wireless_stick_lite.menu.DebugLevel.none=None
+heltec_wireless_stick_lite.menu.DebugLevel.none.build.code_debug=0
+heltec_wireless_stick_lite.menu.DebugLevel.error=Error
+heltec_wireless_stick_lite.menu.DebugLevel.error.build.code_debug=1
+heltec_wireless_stick_lite.menu.DebugLevel.warn=Warn
+heltec_wireless_stick_lite.menu.DebugLevel.warn.build.code_debug=2
+heltec_wireless_stick_lite.menu.DebugLevel.info=Info
+heltec_wireless_stick_lite.menu.DebugLevel.info.build.code_debug=3
+heltec_wireless_stick_lite.menu.DebugLevel.debug=Debug
+heltec_wireless_stick_lite.menu.DebugLevel.debug.build.code_debug=4
+heltec_wireless_stick_lite.menu.DebugLevel.verbose=Verbose
+heltec_wireless_stick_lite.menu.DebugLevel.verbose.build.code_debug=5
+
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.0=REGION_EU868
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.0.build.band=REGION_EU868
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.1=REGION_EU433
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.1.build.band=REGION_EU433
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.2=REGION_CN470
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.2.build.band=REGION_CN470
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.3=REGION_US915
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.3.build.band=REGION_US915
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.4=REGION_AU915
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.4.build.band=REGION_AU915
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.5=REGION_CN779
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.5.build.band=REGION_CN779
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.6=REGION_AS923
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.6.build.band=REGION_AS923
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.7=REGION_KR920
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.7.build.band=REGION_KR920
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.8=REGION_IN865
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.8.build.band=REGION_IN865
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
+heltec_wireless_stick_lite.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
+
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.0=None
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.1=Freq
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.2=Freq && DIO
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
+heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
+
 ##############################################################
 
 espectro32.name=ESPectro32

cores/esp32/Print.h

@@ -73,6 +73,11 @@ public:
     }
 
     size_t printf(const char * format, ...)  __attribute__ ((format (printf, 2, 3)));
+
+    // add availableForWrite to make compatible with Arduino Print.h
+    // default to zero, meaning "a single write may block"
+    // should be overriden by subclasses with buffering
+    virtual int availableForWrite() { return 0; }
     size_t print(const __FlashStringHelper *);
     size_t print(const String &);
     size_t print(const char[]);

cores/esp32/esp32-hal-spi.c

@@ -402,9 +402,9 @@ void spiStopBus(spi_t * spi)
     if(!spi) {
         return;
     }
-    
+
     removeApbChangeCallback(spi, _on_apb_change);
-    
+
     SPI_MUTEX_LOCK();
     spiInitBus(spi);
     SPI_MUTEX_UNLOCK();
@@ -428,14 +428,14 @@ spi_t * spiStartBus(uint8_t spi_num, uint32_t clockDiv, uint8_t dataMode, uint8_
 #endif
 
     if(spi_num == HSPI) {
-        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN);
-        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST);
+        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI2_CLK_EN);
+        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI2_RST);
     } else if(spi_num == VSPI) {
-        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_2);
-        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_2);
+        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI3_CLK_EN);
+        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI3_RST);
     } else {
-        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_1);
-        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_1);
+        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI01_CLK_EN);
+        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI01_RST);
     }
 
     SPI_MUTEX_LOCK();

cores/esp32/esp32-hal-timer.c

@@ -90,56 +90,56 @@ void IRAM_ATTR __timerISR(void * arg){
     }
 }
 
-uint64_t timerRead(hw_timer_t *timer){
+uint64_t IRAM_ATTR timerRead(hw_timer_t *timer){
     timer->dev->update = 1;
     uint64_t h = timer->dev->cnt_high;
     uint64_t l = timer->dev->cnt_low;
     return (h << 32) | l;
 }
 
-uint64_t timerAlarmRead(hw_timer_t *timer){
+uint64_t IRAM_ATTR timerAlarmRead(hw_timer_t *timer){
     uint64_t h = timer->dev->alarm_high;
     uint64_t l = timer->dev->alarm_low;
     return (h << 32) | l;
 }
 
-void timerWrite(hw_timer_t *timer, uint64_t val){
+void IRAM_ATTR timerWrite(hw_timer_t *timer, uint64_t val){
     timer->dev->load_high = (uint32_t) (val >> 32);
     timer->dev->load_low = (uint32_t) (val);
     timer->dev->reload = 1;
 }
 
-void timerAlarmWrite(hw_timer_t *timer, uint64_t alarm_value, bool autoreload){
+void IRAM_ATTR timerAlarmWrite(hw_timer_t *timer, uint64_t alarm_value, bool autoreload){
     timer->dev->alarm_high = (uint32_t) (alarm_value >> 32);
     timer->dev->alarm_low = (uint32_t) alarm_value;
     timer->dev->config.autoreload = autoreload;
 }
 
-void timerSetConfig(hw_timer_t *timer, uint32_t config){
+void IRAM_ATTR timerSetConfig(hw_timer_t *timer, uint32_t config){
     timer->dev->config.val = config;
 }
 
-uint32_t timerGetConfig(hw_timer_t *timer){
+uint32_t IRAM_ATTR timerGetConfig(hw_timer_t *timer){
     return timer->dev->config.val;
 }
 
-void timerSetCountUp(hw_timer_t *timer, bool countUp){
+void IRAM_ATTR timerSetCountUp(hw_timer_t *timer, bool countUp){
     timer->dev->config.increase = countUp;
 }
 
-bool timerGetCountUp(hw_timer_t *timer){
+bool IRAM_ATTR timerGetCountUp(hw_timer_t *timer){
     return timer->dev->config.increase;
 }
 
-void timerSetAutoReload(hw_timer_t *timer, bool autoreload){
+void IRAM_ATTR timerSetAutoReload(hw_timer_t *timer, bool autoreload){
     timer->dev->config.autoreload = autoreload;
 }
 
-bool timerGetAutoReload(hw_timer_t *timer){
+bool IRAM_ATTR timerGetAutoReload(hw_timer_t *timer){
     return timer->dev->config.autoreload;
 }
 
-void timerSetDivider(hw_timer_t *timer, uint16_t divider){//2 to 65536
+void IRAM_ATTR timerSetDivider(hw_timer_t *timer, uint16_t divider){//2 to 65536
     if(!divider){
         divider = 0xFFFF;
     } else if(divider == 1){
@@ -151,41 +151,41 @@ void timerSetDivider(hw_timer_t *timer, uint16_t divider){//2 to 65536
     timer->dev->config.enable = timer_en;
 }
 
-uint16_t timerGetDivider(hw_timer_t *timer){
+uint16_t IRAM_ATTR timerGetDivider(hw_timer_t *timer){
     return timer->dev->config.divider;
 }
 
-void timerStart(hw_timer_t *timer){
+void IRAM_ATTR timerStart(hw_timer_t *timer){
     timer->dev->config.enable = 1;
 }
 
-void timerStop(hw_timer_t *timer){
+void IRAM_ATTR timerStop(hw_timer_t *timer){
     timer->dev->config.enable = 0;
 }
 
-void timerRestart(hw_timer_t *timer){
+void IRAM_ATTR timerRestart(hw_timer_t *timer){
     timer->dev->config.enable = 0;
     timer->dev->reload = 1;
     timer->dev->config.enable = 1;
 }
 
-bool timerStarted(hw_timer_t *timer){
+bool IRAM_ATTR timerStarted(hw_timer_t *timer){
     return timer->dev->config.enable;
 }
 
-void timerAlarmEnable(hw_timer_t *timer){
+void IRAM_ATTR timerAlarmEnable(hw_timer_t *timer){
     timer->dev->config.alarm_en = 1;
 }
 
-void timerAlarmDisable(hw_timer_t *timer){
+void IRAM_ATTR timerAlarmDisable(hw_timer_t *timer){
     timer->dev->config.alarm_en = 0;
 }
 
-bool timerAlarmEnabled(hw_timer_t *timer){
+bool IRAM_ATTR timerAlarmEnabled(hw_timer_t *timer){
     return timer->dev->config.alarm_en;
 }
 
-static void _on_apb_change(void * arg, apb_change_ev_t ev_type, uint32_t old_apb, uint32_t new_apb){
+static void IRAM_ATTR _on_apb_change(void * arg, apb_change_ev_t ev_type, uint32_t old_apb, uint32_t new_apb){
     hw_timer_t * timer = (hw_timer_t *)arg;
     if(ev_type == APB_BEFORE_CHANGE){
         timer->dev->config.enable = 0;
@@ -197,7 +197,7 @@ static void _on_apb_change(void * arg, apb_change_ev_t ev_type, uint32_t old_apb
     }
 }
 
-hw_timer_t * timerBegin(uint8_t num, uint16_t divider, bool countUp){
+hw_timer_t * IRAM_ATTR timerBegin(uint8_t num, uint16_t divider, bool countUp){
     if(num > 3){
         return NULL;
     }
@@ -222,13 +222,13 @@ hw_timer_t * timerBegin(uint8_t num, uint16_t divider, bool countUp){
     return timer;
 }
 
-void timerEnd(hw_timer_t *timer){
+void IRAM_ATTR timerEnd(hw_timer_t *timer){
     timer->dev->config.enable = 0;
     timerAttachInterrupt(timer, NULL, false);
     removeApbChangeCallback(timer, _on_apb_change);
 }
 
-void timerAttachInterrupt(hw_timer_t *timer, void (*fn)(void), bool edge){
+void IRAM_ATTR timerAttachInterrupt(hw_timer_t *timer, void (*fn)(void), bool edge){
     static bool initialized = false;
     static intr_handle_t intr_handle = NULL;
     if(intr_handle){
@@ -279,29 +279,29 @@ void timerAttachInterrupt(hw_timer_t *timer, void (*fn)(void), bool edge){
     }
 }
 
-void timerDetachInterrupt(hw_timer_t *timer){
+void IRAM_ATTR timerDetachInterrupt(hw_timer_t *timer){
     timerAttachInterrupt(timer, NULL, false);
 }
 
-uint64_t timerReadMicros(hw_timer_t *timer){
+uint64_t IRAM_ATTR timerReadMicros(hw_timer_t *timer){
     uint64_t timer_val = timerRead(timer);
     uint16_t div = timerGetDivider(timer);
     return timer_val * div / (getApbFrequency() / 1000000);
 }
 
-double timerReadSeconds(hw_timer_t *timer){
+double IRAM_ATTR timerReadSeconds(hw_timer_t *timer){
     uint64_t timer_val = timerRead(timer);
     uint16_t div = timerGetDivider(timer);
     return (double)timer_val * div / getApbFrequency();
 }
 
-uint64_t timerAlarmReadMicros(hw_timer_t *timer){
+uint64_t IRAM_ATTR timerAlarmReadMicros(hw_timer_t *timer){
     uint64_t timer_val = timerAlarmRead(timer);
     uint16_t div = timerGetDivider(timer);
     return timer_val * div / (getApbFrequency() / 1000000);
 }
 
-double timerAlarmReadSeconds(hw_timer_t *timer){
+double IRAM_ATTR timerAlarmReadSeconds(hw_timer_t *timer){
     uint64_t timer_val = timerAlarmRead(timer);
     uint16_t div = timerGetDivider(timer);
     return (double)timer_val * div / getApbFrequency();

cores/esp32/main.cpp

@@ -3,6 +3,10 @@
 #include "esp_task_wdt.h"
 #include "Arduino.h"
 
+#ifndef CONFIG_ARDUINO_LOOP_STACK_SIZE
+#define CONFIG_ARDUINO_LOOP_STACK_SIZE 8192
+#endif
+
 TaskHandle_t loopTaskHandle = NULL;
 
 #if CONFIG_AUTOSTART_ARDUINO
@@ -25,7 +29,7 @@ extern "C" void app_main()
 {
     loopTaskWDTEnabled = false;
     initArduino();
-    xTaskCreateUniversal(loopTask, "loopTask", 8192, NULL, 1, &loopTaskHandle, CONFIG_ARDUINO_RUNNING_CORE);
+    xTaskCreateUniversal(loopTask, "loopTask", CONFIG_ARDUINO_LOOP_STACK_SIZE, NULL, 1, &loopTaskHandle, CONFIG_ARDUINO_RUNNING_CORE);
 }
 
 #endif

libraries/BLE/src/BLERemoteCharacteristic.cpp

@@ -453,7 +453,7 @@ std::string BLERemoteCharacteristic::readValue() {
  * unregistering a notification.
  * @return N/A.
  */
-void BLERemoteCharacteristic::registerForNotify(notify_callback notifyCallback, bool notifications) {
+void BLERemoteCharacteristic::registerForNotify(notify_callback notifyCallback, bool notifications, bool descriptorRequiresRegistration) {
 	log_v(">> registerForNotify(): %s", toString().c_str());
 
 	m_notifyCallback = notifyCallback;   // Save the notification callback.
@@ -474,7 +474,7 @@ void BLERemoteCharacteristic::registerForNotify(notify_callback notifyCallback,
 		uint8_t val[] = {0x01, 0x00};
 		if(!notifications) val[0] = 0x02;
 		BLERemoteDescriptor* desc = getDescriptor(BLEUUID((uint16_t)0x2902));
-		if (desc != nullptr)
+		if (desc != nullptr && descriptorRequiresRegistration)
 			desc->writeValue(val, 2, true);
 	} // End Register
 	else {   // If we weren't passed a callback function, then this is an unregistration.
@@ -490,7 +490,7 @@ void BLERemoteCharacteristic::registerForNotify(notify_callback notifyCallback,
 
 		uint8_t val[] = {0x00, 0x00};
 		BLERemoteDescriptor* desc = getDescriptor((uint16_t)0x2902);
-		if (desc != nullptr)
+		if (desc != nullptr && descriptorRequiresRegistration)
 			desc->writeValue(val, 2, true);
 	} // End Unregister
 

libraries/BLE/src/BLERemoteCharacteristic.h

@@ -46,7 +46,7 @@ public:
 	uint16_t    readUInt16();
 	uint32_t    readUInt32();
 	float       readFloat();
-	void        registerForNotify(notify_callback _callback, bool notifications = true);
+	void        registerForNotify(notify_callback _callback, bool notifications = true, bool descriptorRequiresRegistration = true);
 	void        writeValue(uint8_t* data, size_t length, bool response = false);
 	void        writeValue(std::string newValue, bool response = false);
 	void        writeValue(uint8_t newValue, bool response = false);

libraries/BLE/src/BLERemoteService.cpp

@@ -245,6 +245,7 @@ std::map<uint16_t, BLERemoteCharacteristic*>* BLERemoteService::getCharacteristi
  */
 void BLERemoteService::getCharacteristics(std::map<uint16_t, BLERemoteCharacteristic*>* pCharacteristicMap) {
 	log_v(">> getCharacteristics() for service: %s", getUUID().toString().c_str());
+	(void)pCharacteristicMap;
 	// If is possible that we have not read the characteristics associated with the service so do that
 	// now.  The request to retrieve the characteristics by calling "retrieveCharacteristics" is a blocking
 	// call and does not return until all the characteristics are available.

libraries/BluetoothSerial/examples/SerialToSerialBT_SSP_pairing/SerialToSerialBT_SSP_pairing.ino

@@ -0,0 +1,75 @@
+//This example code is in the Public Domain (or CC0 licensed, at your option.)
+//By Richard Li - 2020
+//
+//This example creates a bridge between Serial and Classical Bluetooth (SPP with authentication)
+//and also demonstrate that SerialBT have the same functionalities of a normal Serial
+
+#include "BluetoothSerial.h"
+
+#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
+#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
+#endif
+
+BluetoothSerial SerialBT;
+boolean confirmRequestPending = true;
+
+void BTConfirmRequestCallback(uint32_t numVal)
+{
+  confirmRequestPending = true;
+  Serial.println(numVal);
+}
+
+void BTAuthCompleteCallback(boolean success)
+{
+  confirmRequestPending = false;
+  if (success)
+  {
+    Serial.println("Pairing success!!");
+  }
+  else
+  {
+    Serial.println("Pairing failed, rejected by user!!");
+  }
+}
+
+
+void setup()
+{
+  Serial.begin(115200);
+  SerialBT.enableSSP();
+  SerialBT.onConfirmRequest(BTConfirmRequestCallback);
+  SerialBT.onAuthComplete(BTAuthCompleteCallback);
+  SerialBT.begin("ESP32test"); //Bluetooth device name
+  Serial.println("The device started, now you can pair it with bluetooth!");
+}
+
+void loop()
+{
+  if (confirmRequestPending)
+  {
+    if (Serial.available())
+    {
+      int dat = Serial.read();
+      if (dat == 'Y' || dat == 'y')
+      {
+        SerialBT.confirmReply(true);
+      }
+      else
+      {
+        SerialBT.confirmReply(false);
+      }
+    }
+  }
+  else
+  {
+    if (Serial.available())
+    {
+      SerialBT.write(Serial.read());
+    }
+    if (SerialBT.available())
+    {
+      Serial.write(SerialBT.read());
+    }
+    delay(20);
+  }
+}

libraries/BluetoothSerial/src/BluetoothSerial.cpp

@@ -51,6 +51,9 @@ static EventGroupHandle_t _spp_event_group = NULL;
 static boolean secondConnectionAttempt;
 static esp_spp_cb_t * custom_spp_callback = NULL;
 static BluetoothSerialDataCb custom_data_callback = NULL;
+static esp_bd_addr_t current_bd_addr;
+static ConfirmRequestCb confirm_request_callback = NULL;
+static AuthCompleteCb auth_complete_callback = NULL;
 
 #define INQ_LEN 0x10
 #define INQ_NUM_RSPS 20
@@ -398,8 +401,14 @@ static void esp_bt_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *pa
         case ESP_BT_GAP_AUTH_CMPL_EVT:
             if (param->auth_cmpl.stat == ESP_BT_STATUS_SUCCESS) {
                 log_v("authentication success: %s", param->auth_cmpl.device_name);
+                if (auth_complete_callback) {
+                    auth_complete_callback(true);
+                }
             } else {
                 log_e("authentication failed, status:%d", param->auth_cmpl.stat);
+                if (auth_complete_callback) {
+                    auth_complete_callback(false);
+                }
             }
             break;
 
@@ -421,7 +430,13 @@ static void esp_bt_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *pa
        
         case ESP_BT_GAP_CFM_REQ_EVT:
             log_i("ESP_BT_GAP_CFM_REQ_EVT Please compare the numeric value: %d", param->cfm_req.num_val);
-            esp_bt_gap_ssp_confirm_reply(param->cfm_req.bda, true);
+            if (confirm_request_callback) {
+                memcpy(current_bd_addr, param->cfm_req.bda, sizeof(esp_bd_addr_t));
+                confirm_request_callback(param->cfm_req.num_val);
+            }
+            else {
+                esp_bt_gap_ssp_confirm_reply(param->cfm_req.bda, true);
+            }
             break;
 
         case ESP_BT_GAP_KEY_NOTIF_EVT:
@@ -500,7 +515,9 @@ static bool _init_bt(const char *deviceName)
         }
     }
 
-    if (_isMaster && esp_bt_gap_register_callback(esp_bt_gap_cb) != ESP_OK) {
+    // Why only master need this?  Slave need this during pairing as well
+//    if (_isMaster && esp_bt_gap_register_callback(esp_bt_gap_cb) != ESP_OK) {
+    if (esp_bt_gap_register_callback(esp_bt_gap_cb) != ESP_OK) {
         log_e("gap register failed");
         return false;
     }
@@ -672,6 +689,22 @@ void BluetoothSerial::end()
     _stop_bt();
 }
 
+void BluetoothSerial::onConfirmRequest(ConfirmRequestCb cb)
+{
+    confirm_request_callback = cb;
+}
+
+void BluetoothSerial::onAuthComplete(AuthCompleteCb cb)
+{
+    auth_complete_callback = cb;
+}
+
+void BluetoothSerial::confirmReply(boolean confirm)
+{
+    esp_bt_gap_ssp_confirm_reply(current_bd_addr, confirm);  
+}
+
+
 esp_err_t BluetoothSerial::register_callback(esp_spp_cb_t * callback)
 {
     custom_spp_callback = callback;

libraries/BluetoothSerial/src/BluetoothSerial.h

@@ -25,6 +25,8 @@
 #include <functional>
 
 typedef std::function<void(const uint8_t *buffer, size_t size)> BluetoothSerialDataCb;
+typedef std::function<void(uint32_t num_val)> ConfirmRequestCb;
+typedef std::function<void(boolean success)> AuthCompleteCb;
 
 class BluetoothSerial: public Stream
 {
@@ -44,6 +46,10 @@ class BluetoothSerial: public Stream
         void end(void);
         void onData(BluetoothSerialDataCb cb);
         esp_err_t register_callback(esp_spp_cb_t * callback);
+        
+        void onConfirmRequest(ConfirmRequestCb cb);
+        void onAuthComplete(AuthCompleteCb cb);
+        void confirmReply(boolean confirm);
 
         void enableSSP();
         bool setPin(const char *pin);

libraries/HTTPClient/src/HTTPClient.cpp

@@ -73,11 +73,15 @@ public:
 
     bool verify(WiFiClient& client, const char* host) override
     {
-         WiFiClientSecure& wcs = static_cast<WiFiClientSecure&>(client);
-         wcs.setCACert(_cacert);
-         wcs.setCertificate(_clicert);
-         wcs.setPrivateKey(_clikey);
-         return true;
+        WiFiClientSecure& wcs = static_cast<WiFiClientSecure&>(client);
+        if (_cacert == nullptr) {
+            wcs.setInsecure();
+        } else {
+            wcs.setCACert(_cacert);
+            wcs.setCertificate(_clicert);
+            wcs.setPrivateKey(_clikey);
+        }
+        return true;
     }
 
 protected:

libraries/SPI/src/SPI.cpp

@@ -85,7 +85,7 @@ void SPIClass::setHwCs(bool use)
     if(use && !_use_hw_ss) {
         spiAttachSS(_spi, 0, _ss);
         spiSSEnable(_spi);
-    } else if(_use_hw_ss) {
+    } else if(!use && _use_hw_ss) {
         spiSSDisable(_spi);
         spiDetachSS(_spi, _ss);
     }

libraries/WiFi/src/ETH.cpp

@@ -22,6 +22,7 @@
 #include "eth_phy/phy.h"
 #include "eth_phy/phy_tlk110.h"
 #include "eth_phy/phy_lan8720.h"
+#include "eth_phy/phy_ip101.h"
 #include "lwip/err.h"
 #include "lwip/dns.h"
 
@@ -78,6 +79,9 @@ bool ETHClass::begin(uint8_t phy_addr, int power, int mdc, int mdio, eth_phy_typ
     } else if(type == ETH_PHY_TLK110){
         eth_config_t config = phy_tlk110_default_ethernet_config;
         memcpy(&eth_config, &config, sizeof(eth_config_t));
+    } else if(type == ETH_PHY_IP101) {
+      eth_config_t config = phy_ip101_default_ethernet_config;
+      memcpy(&eth_config, &config, sizeof(eth_config_t));
     } else {
         log_e("Bad ETH_PHY type: %u", (uint8_t)type);
         return false;

libraries/WiFi/src/ETH.h

@@ -48,7 +48,7 @@
 #define ETH_CLK_MODE ETH_CLOCK_GPIO0_IN
 #endif
 
-typedef enum { ETH_PHY_LAN8720, ETH_PHY_TLK110, ETH_PHY_MAX } eth_phy_type_t;
+typedef enum { ETH_PHY_LAN8720, ETH_PHY_TLK110, ETH_PHY_IP101, ETH_PHY_MAX } eth_phy_type_t;
 
 class ETHClass {
     private:

libraries/WiFi/src/WiFi.cpp

@@ -88,4 +88,14 @@ void WiFiClass::printDiag(Print& p)
     p.println(conf.sta.bssid_set);
 }
 
+void WiFiClass::enableProv(bool status)
+{
+    prov_enable = status;
+}
+
+bool WiFiClass::isProvEnabled()
+{
+    return prov_enable;
+}
+
 WiFiClass WiFi;

libraries/WiFi/src/WiFi.h

@@ -37,11 +37,17 @@
 #include "WiFiClient.h"
 #include "WiFiServer.h"
 #include "WiFiUdp.h"
-#include "WiFiProv.h"
 
-class WiFiClass : public WiFiGenericClass, public WiFiSTAClass, public WiFiScanClass, public WiFiAPClass, public WiFiProvClass
+class WiFiClass : public WiFiGenericClass, public WiFiSTAClass, public WiFiScanClass, public WiFiAPClass
 {
+private:
+    bool prov_enable;
 public:
+    WiFiClass()
+    {
+        prov_enable = false;
+    }
+
     using WiFiGenericClass::channel;
 
     using WiFiSTAClass::SSID;
@@ -60,6 +66,8 @@ public:
     friend class WiFiClient;
     friend class WiFiServer;
     friend class WiFiUDP;
+    void enableProv(bool status);
+    bool isProvEnabled();
 };
 
 extern WiFiClass WiFi;

libraries/WiFi/src/WiFiClient.cpp

@@ -216,9 +216,9 @@ int WiFiClient::connect(IPAddress ip, uint16_t port, int32_t timeout)
 
     uint32_t ip_addr = ip;
     struct sockaddr_in serveraddr;
-    bzero((char *) &serveraddr, sizeof(serveraddr));
+    memset((char *) &serveraddr, 0, sizeof(serveraddr));
     serveraddr.sin_family = AF_INET;
-    bcopy((const void *)(&ip_addr), (void *)&serveraddr.sin_addr.s_addr, 4);
+    memcpy((void *)&serveraddr.sin_addr.s_addr, (const void *)(&ip_addr), 4);
     serveraddr.sin_port = htons(port);
     fd_set fdset;
     struct timeval tv;

libraries/WiFiClientSecure/examples/WiFiClientInsecure/WiFiClientInsecure.ino

@@ -0,0 +1,61 @@
+#include <WiFiClientSecure.h>
+
+const char* ssid     = "your-ssid";     // your network SSID (name of wifi network)
+const char* password = "your-password"; // your network password
+
+const char*  server = "www.howsmyssl.com";  // Server URL
+
+WiFiClientSecure client;
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(115200);
+  delay(100);
+
+  Serial.print("Attempting to connect to SSID: ");
+  Serial.println(ssid);
+  WiFi.begin(ssid, password);
+
+  // attempt to connect to Wifi network:
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print(".");
+    // wait 1 second for re-trying
+    delay(1000);
+  }
+
+  Serial.print("Connected to ");
+  Serial.println(ssid);
+
+  Serial.println("\nStarting connection to server...");
+  client.setInsecure();//skip verification
+  if (!client.connect(server, 443))
+    Serial.println("Connection failed!");
+  else {
+    Serial.println("Connected to server!");
+    // Make a HTTP request:
+    client.println("GET https://www.howsmyssl.com/a/check HTTP/1.0");
+    client.println("Host: www.howsmyssl.com");
+    client.println("Connection: close");
+    client.println();
+
+    while (client.connected()) {
+      String line = client.readStringUntil('\n');
+      if (line == "\r") {
+        Serial.println("headers received");
+        break;
+      }
+    }
+    // if there are incoming bytes available
+    // from the server, read them and print them:
+    while (client.available()) {
+      char c = client.read();
+      Serial.write(c);
+    }
+
+    client.stop();
+  }
+}
+
+void loop() {
+  // do nothing
+}

libraries/WiFiClientSecure/src/WiFiClientSecure.cpp

@@ -36,6 +36,7 @@ WiFiClientSecure::WiFiClientSecure()
     ssl_init(sslclient);
     sslclient->socket = -1;
     sslclient->handshake_timeout = 120000;
+    _use_insecure = false;
     _CA_cert = NULL;
     _cert = NULL;
     _private_key = NULL;
@@ -116,17 +117,17 @@ int WiFiClientSecure::connect(const char *host, uint16_t port, int32_t timeout){
     return connect(host, port);
 }
 
-int WiFiClientSecure::connect(IPAddress ip, uint16_t port, const char *_CA_cert, const char *_cert, const char *_private_key)
+int WiFiClientSecure::connect(IPAddress ip, uint16_t port, const char *CA_cert, const char *cert, const char *private_key)
 {
-    return connect(ip.toString().c_str(), port, _CA_cert, _cert, _private_key);
+    return connect(ip.toString().c_str(), port, CA_cert, cert, private_key);
 }
 
-int WiFiClientSecure::connect(const char *host, uint16_t port, const char *_CA_cert, const char *_cert, const char *_private_key)
+int WiFiClientSecure::connect(const char *host, uint16_t port, const char *CA_cert, const char *cert, const char *private_key)
 {
     if(_timeout > 0){
         sslclient->handshake_timeout = _timeout;
     }
-    int ret = start_ssl_client(sslclient, host, port, _timeout, _CA_cert, _cert, _private_key, NULL, NULL);
+    int ret = start_ssl_client(sslclient, host, port, _timeout, CA_cert, cert, private_key, NULL, NULL, _use_insecure);
     _lastError = ret;
     if (ret < 0) {
         log_e("start_ssl_client: %d", ret);
@@ -138,7 +139,7 @@ int WiFiClientSecure::connect(const char *host, uint16_t port, const char *_CA_c
 }
 
 int WiFiClientSecure::connect(IPAddress ip, uint16_t port, const char *pskIdent, const char *psKey) {
-    return connect(ip.toString().c_str(), port,_pskIdent, _psKey);
+    return connect(ip.toString().c_str(), port, pskIdent, psKey);
 }
 
 int WiFiClientSecure::connect(const char *host, uint16_t port, const char *pskIdent, const char *psKey) {
@@ -146,7 +147,7 @@ int WiFiClientSecure::connect(const char *host, uint16_t port, const char *pskId
     if(_timeout > 0){
         sslclient->handshake_timeout = _timeout;
     }
-    int ret = start_ssl_client(sslclient, host, port, _timeout, NULL, NULL, NULL, _pskIdent, _psKey);
+    int ret = start_ssl_client(sslclient, host, port, _timeout, NULL, NULL, NULL, pskIdent, psKey, _use_insecure);
     _lastError = ret;
     if (ret < 0) {
         log_e("start_ssl_client: %d", ret);
@@ -245,6 +246,16 @@ uint8_t WiFiClientSecure::connected()
     return _connected;
 }
 
+void WiFiClientSecure::setInsecure()
+{
+    _CA_cert = NULL;
+    _cert = NULL;
+    _private_key = NULL;
+    _pskIdent = NULL;
+    _psKey = NULL;
+    _use_insecure = true;
+}
+
 void WiFiClientSecure::setCACert (const char *rootCA)
 {
     _CA_cert = rootCA;

libraries/WiFiClientSecure/src/WiFiClientSecure.h

@@ -33,6 +33,7 @@ protected:
     int _lastError = 0;
 	int _peek = -1;
     int _timeout = 0;
+    bool _use_insecure;
     const char *_CA_cert;
     const char *_cert;
     const char *_private_key;
@@ -62,6 +63,7 @@ public:
     void stop();
     uint8_t connected();
     int lastError(char *buf, const size_t size);
+    void setInsecure(); // Don't validate the chain, just accept whatever is given.  VERY INSECURE!
     void setPreSharedKey(const char *pskIdent, const char *psKey); // psKey in Hex
     void setCACert(const char *rootCA);
     void setCertificate(const char *client_ca);

libraries/WiFiClientSecure/src/ssl_client.cpp

@@ -51,13 +51,17 @@ void ssl_init(sslclient_context *ssl_client)
 }
 
 
-int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t port, int timeout, const char *rootCABuff, const char *cli_cert, const char *cli_key, const char *pskIdent, const char *psKey)
+int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t port, int timeout, const char *rootCABuff, const char *cli_cert, const char *cli_key, const char *pskIdent, const char *psKey, bool insecure)
 {
     char buf[512];
     int ret, flags;
     int enable = 1;
     log_v("Free internal heap before TLS %u", ESP.getFreeHeap());
 
+    if (rootCABuff == NULL && pskIdent == NULL && psKey == NULL && !insecure) {
+        return -1;
+    }
+
     log_v("Starting socket");
     ssl_client->socket = -1;
 
@@ -118,7 +122,10 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
     // MBEDTLS_SSL_VERIFY_REQUIRED if a CA certificate is defined on Arduino IDE and
     // MBEDTLS_SSL_VERIFY_NONE if not.
 
-    if (rootCABuff != NULL) {
+    if (insecure) {
+        mbedtls_ssl_conf_authmode(&ssl_client->ssl_conf, MBEDTLS_SSL_VERIFY_NONE);
+        log_i("WARNING: Skipping SSL Verification. INSECURE!");
+    } else if (rootCABuff != NULL) {
         log_v("Loading CA cert");
         mbedtls_x509_crt_init(&ssl_client->ca_cert);
         mbedtls_ssl_conf_authmode(&ssl_client->ssl_conf, MBEDTLS_SSL_VERIFY_REQUIRED);
@@ -126,8 +133,8 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
         mbedtls_ssl_conf_ca_chain(&ssl_client->ssl_conf, &ssl_client->ca_cert, NULL);
         //mbedtls_ssl_conf_verify(&ssl_client->ssl_ctx, my_verify, NULL );
         if (ret < 0) {
-		// free the ca_cert in the case parse failed, otherwise, the old ca_cert still in the heap memory, that lead to "out of memory" crash.
-		mbedtls_x509_crt_free(&ssl_client->ca_cert);
+            // free the ca_cert in the case parse failed, otherwise, the old ca_cert still in the heap memory, that lead to "out of memory" crash.
+            mbedtls_x509_crt_free(&ssl_client->ca_cert);
             return handle_error(ret);
         }
     } else if (pskIdent != NULL && psKey != NULL) {
@@ -161,11 +168,10 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
             return handle_error(ret);
         }
     } else {
-        mbedtls_ssl_conf_authmode(&ssl_client->ssl_conf, MBEDTLS_SSL_VERIFY_NONE);
-        log_i("WARNING: Use certificates for a more secure communication!");
+        return -1;
     }
 
-    if (cli_cert != NULL && cli_key != NULL) {
+    if (!insecure && cli_cert != NULL && cli_key != NULL) {
         mbedtls_x509_crt_init(&ssl_client->client_cert);
         mbedtls_pk_init(&ssl_client->client_key);
 
@@ -173,8 +179,8 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
 
         ret = mbedtls_x509_crt_parse(&ssl_client->client_cert, (const unsigned char *)cli_cert, strlen(cli_cert) + 1);
         if (ret < 0) {
-		// free the client_cert in the case parse failed, otherwise, the old client_cert still in the heap memory, that lead to "out of memory" crash.
-		mbedtls_x509_crt_free(&ssl_client->client_cert);
+        // free the client_cert in the case parse failed, otherwise, the old client_cert still in the heap memory, that lead to "out of memory" crash.
+        mbedtls_x509_crt_free(&ssl_client->client_cert);
             return handle_error(ret);
         }
 
@@ -211,7 +217,7 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
         }
         if((millis()-handshake_start_time)>ssl_client->handshake_timeout)
 			return -1;
-	    vTaskDelay(10 / portTICK_PERIOD_MS);
+	    vTaskDelay(2);//2 ticks
     }
 
 
@@ -227,7 +233,7 @@ int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t p
     log_v("Verifying peer X.509 certificate...");
 
     if ((flags = mbedtls_ssl_get_verify_result(&ssl_client->ssl_ctx)) != 0) {
-        bzero(buf, sizeof(buf));
+        memset(buf, 0, sizeof(buf));
         mbedtls_x509_crt_verify_info(buf, sizeof(buf), "  ! ", flags);
         log_e("Failed to verify peer certificate! verification info: %s", buf);
         stop_ssl_socket(ssl_client, rootCABuff, cli_cert, cli_key);  //It's not safe continue.

libraries/WiFiClientSecure/src/ssl_client.h

@@ -29,7 +29,7 @@ typedef struct sslclient_context {
 
 
 void ssl_init(sslclient_context *ssl_client);
-int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t port, int timeout, const char *rootCABuff, const char *cli_cert, const char *cli_key, const char *pskIdent, const char *psKey);
+int start_ssl_client(sslclient_context *ssl_client, const char *host, uint32_t port, int timeout, const char *rootCABuff, const char *cli_cert, const char *cli_key, const char *pskIdent, const char *psKey, bool insecure);
 void stop_ssl_socket(sslclient_context *ssl_client, const char *rootCABuff, const char *cli_cert, const char *cli_key);
 int data_to_read(sslclient_context *ssl_client);
 int send_ssl_data(sslclient_context *ssl_client, const uint8_t *data, uint16_t len);

libraries/WiFiProv/examples/WiFiProv/WiFiProv.ino

@@ -1,4 +1,4 @@
-#include "WiFi.h"
+#include "WiFiProv.h"
 void SysProvEvent(system_event_t *sys_event,wifi_prov_event_t *prov_event)
 {
     if(sys_event) {
@@ -56,8 +56,8 @@ void setup() {
   /* uint8_t uuid[16] = {0xb4, 0xdf, 0x5a, 0x1c, 0x3f, 0x6b, 0xf4, 0xbf,
                    0xea, 0x4a, 0x82, 0x03, 0x04, 0x90, 0x1a, 0x02 };*/
   WiFi.onEvent(SysProvEvent);
-  //WiFi.beginProvision(provSchemeBLE, WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, "abcd1234", "PROV_XXX", NULL, NULL);
-  WiFi.beginProvision(provSchemeSoftAP, WIFI_PROV_EVENT_HANDLER_NONE, WIFI_PROV_SECURITY_1, "abcd1234", NULL, NULL, NULL);
+  //WiFiProv.beginProvision(provSchemeBLE, WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, "abcd1234", "PROV_XXX", NULL, NULL);
+  WiFiProv.beginProvision(provSchemeSoftAP, WIFI_PROV_EVENT_HANDLER_NONE, WIFI_PROV_SECURITY_1, "abcd1234", NULL, NULL, NULL);
 }
 
 void loop() {

libraries/WiFiProv/library.properties

@@ -0,0 +1,9 @@
+name=WiFiProv
+version=1.0
+author=Switi Mhaiske <sweetymhaiske@gmail.com>
+maintainer=Hristo Gochkov <hristo@espressif.com>
+sentence=Enables provisioning.
+paragraph=With this library you can perform provisioning on esp32 via SoftAP or BLE.
+category=Communication
+url=
+architectures=esp32

libraries/WiFiProv/src/WiFiProv.cpp

@@ -31,7 +31,8 @@
 #include <wifi_provisioning/scheme_softap.h>
 #include <wifi_provisioning/manager.h>
 #undef IPADDR_NONE
-#include "WiFi.h"
+#include "WiFiProv.h"
+#include "SimpleBLE.h"
 
 extern esp_err_t postToSysQueue(system_prov_event_t *);
 
@@ -42,13 +43,6 @@ static const uint8_t custom_service_uuid[16] = {  0xb4, 0xdf, 0x5a, 0x1c, 0x3f,
 
 #define SERV_NAME_PREFIX_PROV "PROV_"
 
-bool WiFiProvClass::prov_enable = true;
-
-bool WiFiProvClass::isProvEnabled()
-{
-    return prov_enable;
-}
-
 void provSchemeBLE()
 {
     prov_scheme = WIFI_PROV_SCHEME_BLE;
@@ -109,7 +103,7 @@ static void get_device_service_name(char *service_name, size_t max)
 
 void WiFiProvClass :: beginProvision(void (*scheme_cb)(), wifi_prov_event_handler_t scheme_event_handler, wifi_prov_security_t security, const char * pop, const char *service_name, const char *service_key, uint8_t * uuid)
 {
-    prov_enable = true;
+    WiFi.enableProv(true);
     bool provisioned = false;
     scheme_cb();
     config.scheme_event_handler = scheme_event_handler;
@@ -152,7 +146,7 @@ void WiFiProvClass :: beginProvision(void (*scheme_cb)(), wifi_prov_event_handle
     } else {
         wifi_prov_mgr_deinit();
         WiFi.mode(WIFI_MODE_STA);
-        log_i("Aleardy Provisioned, starting Wi-Fi STA");
+        log_i("Already Provisioned, starting Wi-Fi STA");
 #if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO
         wifi_config_t conf;
         esp_wifi_get_config(WIFI_IF_STA,&conf);
@@ -162,4 +156,4 @@ void WiFiProvClass :: beginProvision(void (*scheme_cb)(), wifi_prov_event_handle
         WiFi.begin(); 
     }
 }
-
+WiFiProvClass WiFiProv;

libraries/WiFiProv/src/WiFiProv.h

@@ -17,10 +17,9 @@
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
 
+#include "WiFi.h"
 #include "wifi_provisioning/manager.h"
 #include "wifi_provisioning/scheme_ble.h"
-#include "nvs_flash.h"
-#include "SimpleBLE.h"
 //Select the scheme using which you want to provision
 typedef enum 
 {
@@ -34,19 +33,11 @@ extern void provSchemeBLE();
 //Provisioning class 
 class WiFiProvClass
 {
-    protected:
-        static bool prov_enable;
-  
     public:
-        WiFiProvClass() {
-            prov_enable = false;
-        }
 
-        bool isProvEnabled();
-    
-        void beginProvision(void (*scheme_cb)() = provSchemeSoftAP, wifi_prov_event_handler_t scheme_event_handler = WIFI_PROV_EVENT_HANDLER_NONE, wifi_prov_security_t security = WIFI_PROV_SECURITY_1, const char * pop = "abcd1234", const char * service_name = NULL, const char * service_key = NULL, uint8_t *uuid = NULL);
+    void beginProvision(void (*scheme_cb)() = provSchemeSoftAP, wifi_prov_event_handler_t scheme_event_handler = WIFI_PROV_EVENT_HANDLER_NONE, wifi_prov_security_t security = WIFI_PROV_SECURITY_1, const char * pop = "abcd1234", const char * service_name = NULL, const char * service_key = NULL, uint8_t *uuid = NULL);
 };
-
+extern WiFiProvClass WiFiProv;
 /*
  Event Handler for BLE
       - WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BTDM

package/package_esp32_index.template.json

@@ -115,8 +115,8 @@
               "host": "x86_64-apple-darwin",
               "url": "https://dl.espressif.com/dl/esptool-3.0.0.2-macos.tar.gz",
               "archiveFileName": "esptool-3.0.0.2-macos.tar.gz",
-              "checksum": "SHA-256:9213f46d5aa865558da4a2ef4218e87eef4782779128083c15ce2b3e4d07a1ea",
-              "size": "3849615"
+              "checksum": "SHA-256:2cafab7f1ebce89475b84c115548eaace40b6366d7b3f9862cdb2fc64f806643",
+              "size": "3859642"
             },
             {
               "host": "x86_64-pc-linux-gnu",

platform.txt

@@ -35,7 +35,7 @@ compiler.S.flags=-c -g3 -x assembler-with-cpp -MMD -mlongcalls
 
 compiler.c.elf.cmd=xtensa-esp32-elf-gcc
 compiler.c.elf.flags=-nostdlib "-L{compiler.sdk.path}/lib" "-L{compiler.sdk.path}/ld" -T esp32_out.ld -T esp32.project.ld -T esp32.rom.ld -T esp32.peripherals.ld -T esp32.rom.libgcc.ld -T esp32.rom.spiram_incompatible_fns.ld -u ld_include_panic_highint_hdl -u call_user_start_cpu0 -Wl,--gc-sections -Wl,-static -Wl,--undefined=uxTopUsedPriority  -u __cxa_guard_dummy -u __cxx_fatal_exception
-compiler.c.elf.libs=-lgcc -lopenssl -lbtdm_app -lfatfs -lwps -lcoexist -lwear_levelling -lesp_http_client -lprotobuf-c -lhal -lnewlib -ldriver -lbootloader_support -lpp -lfreemodbus -lmesh -lsmartconfig -ljsmn -lwpa -lethernet -lphy -lapp_trace -lconsole -lulp -lwpa_supplicant -lfreertos -lbt -lmicro-ecc -lesp32-camera -lcxx -lxtensa-debug-module -ltcp_transport -lod -lmdns -ldetection -lvfs -lpe -lesp_websocket_client -lespcoredump -lesp_ringbuf -lsoc -lcore -lfb_gfx -lsdmmc -llibsodium -lcoap -ltcpip_adapter -lprotocomm -lesp_event -limage_util -lc_nano -lesp-tls -lasio -lrtc -lspi_flash -lwpa2 -lwifi_provisioning -lesp32 -lface_recognition -lapp_update -lnghttp -ldl -lspiffs -lface_detection -lefuse -lunity -lesp_https_server -lespnow -lnvs_flash -lesp_adc_cal -llog -ldetection_cat_face -lsmartconfig_ack -lexpat -lm -lfr -lmqtt -lc -lheap -lmbedtls -llwip -lnet80211 -lesp_http_server -lpthread -ljson -lesp_https_ota -lfd  -lstdc++
+compiler.c.elf.libs=-lgcc -lesp_http_client -lcxx -lwps -lsoc -lesp_event -lc -lprotobuf-c -lunity -lesp_ringbuf -lasio -lnewlib -lfreemodbus -lbtdm_app -ltcpip_adapter -llog -lxtensa-debug-module -lsmartconfig -lspi_flash -lmesh -lwpa -lheap -lbootloader_support -lapp_update -llwip -ldetection_cat_face -lopenssl -ldriver -lesp_https_ota -lfr -lconsole -llibsodium -lmqtt -ljson -lwear_levelling -lface_recognition -lfatfs -lspiffs -ldl -lrtc -ljsmn -lesp_http_server -lfreertos -lespcoredump -lesp_websocket_client -lod -lprotocomm -lwpa2 -lesp_adc_cal -lnghttp -lc_nano -lpp -lpe -lethernet -lbt -ldetection -lulp -lcoap -lfd -lespnow -lmdns -lmicro-ecc -lcore -lmbedtls -lcoexist -lface_detection -lesp32 -ltcp_transport -lphy -lsmartconfig_ack -lhal -lnvs_flash -lfb_gfx -lvfs -lesp32-camera -lm -lsdmmc -lapp_trace -lefuse -lnet80211 -lesp-tls -lwifi_provisioning -lwpa_supplicant -lesp_https_server -limage_util -lpthread -lexpat  -lstdc++
 
 compiler.as.cmd=xtensa-esp32-elf-as
 

tools/platformio-build.py

@@ -171,7 +171,7 @@ env.Append(
     ],
 
     LIBS=[
-        "-lgcc", "-lopenssl", "-lbtdm_app", "-lfatfs", "-lwps", "-lcoexist", "-lwear_levelling", "-lesp_http_client", "-lprotobuf-c", "-lhal", "-lnewlib", "-ldriver", "-lbootloader_support", "-lpp", "-lfreemodbus", "-lmesh", "-lsmartconfig", "-ljsmn", "-lwpa", "-lethernet", "-lphy", "-lapp_trace", "-lconsole", "-lulp", "-lwpa_supplicant", "-lfreertos", "-lbt", "-lmicro-ecc", "-lesp32-camera", "-lcxx", "-lxtensa-debug-module", "-ltcp_transport", "-lod", "-lmdns", "-ldetection", "-lvfs", "-lpe", "-lesp_websocket_client", "-lespcoredump", "-lesp_ringbuf", "-lsoc", "-lcore", "-lfb_gfx", "-lsdmmc", "-llibsodium", "-lcoap", "-ltcpip_adapter", "-lprotocomm", "-lesp_event", "-limage_util", "-lc_nano", "-lesp-tls", "-lasio", "-lrtc", "-lspi_flash", "-lwpa2", "-lwifi_provisioning", "-lesp32", "-lface_recognition", "-lapp_update", "-lnghttp", "-ldl", "-lspiffs", "-lface_detection", "-lefuse", "-lunity", "-lesp_https_server", "-lespnow", "-lnvs_flash", "-lesp_adc_cal", "-llog", "-ldetection_cat_face", "-lsmartconfig_ack", "-lexpat", "-lm", "-lfr", "-lmqtt", "-lc", "-lheap", "-lmbedtls", "-llwip", "-lnet80211", "-lesp_http_server", "-lpthread", "-ljson", "-lesp_https_ota", "-lfd", "-lstdc++"
+        "-lgcc", "-lesp_http_client", "-lcxx", "-lwps", "-lsoc", "-lesp_event", "-lc", "-lprotobuf-c", "-lunity", "-lesp_ringbuf", "-lasio", "-lnewlib", "-lfreemodbus", "-lbtdm_app", "-ltcpip_adapter", "-llog", "-lxtensa-debug-module", "-lsmartconfig", "-lspi_flash", "-lmesh", "-lwpa", "-lheap", "-lbootloader_support", "-lapp_update", "-llwip", "-ldetection_cat_face", "-lopenssl", "-ldriver", "-lesp_https_ota", "-lfr", "-lconsole", "-llibsodium", "-lmqtt", "-ljson", "-lwear_levelling", "-lface_recognition", "-lfatfs", "-lspiffs", "-ldl", "-lrtc", "-ljsmn", "-lesp_http_server", "-lfreertos", "-lespcoredump", "-lesp_websocket_client", "-lod", "-lprotocomm", "-lwpa2", "-lesp_adc_cal", "-lnghttp", "-lc_nano", "-lpp", "-lpe", "-lethernet", "-lbt", "-ldetection", "-lulp", "-lcoap", "-lfd", "-lespnow", "-lmdns", "-lmicro-ecc", "-lcore", "-lmbedtls", "-lcoexist", "-lface_detection", "-lesp32", "-ltcp_transport", "-lphy", "-lsmartconfig_ack", "-lhal", "-lnvs_flash", "-lfb_gfx", "-lvfs", "-lesp32-camera", "-lm", "-lsdmmc", "-lapp_trace", "-lefuse", "-lnet80211", "-lesp-tls", "-lwifi_provisioning", "-lwpa_supplicant", "-lesp_https_server", "-limage_util", "-lpthread", "-lexpat", "-lstdc++"
     ],
 
     LIBSOURCE_DIRS=[

tools/sdk/include/bootloader_support/esp_flash_encrypt.h

@@ -110,7 +110,11 @@ esp_err_t esp_flash_encrypt_region(uint32_t src_addr, size_t data_length);
  * is enabled but secure boot is not used. This should protect against
  * serial re-flashing of an unauthorised code in absence of secure boot.
  *
- * @return 
+ * @note To support disabling UART Download Mode on ESP32 V3 only, this function
+ * doesn't write protect FLASH_CRYPT_CNT but instead sets it to the max value
+ * (effectively the same result but allows burning the UART_DL_DIS efuse later on,
+ * as this is otherwise also disabled if FLASH_CRYPT_CNT is write protected.)
+ *
  */
 void esp_flash_write_protect_crypt_cnt();
 

tools/sdk/include/bt/esp_bt.h

@@ -454,28 +454,6 @@ esp_err_t esp_bt_sleep_enable(void);
  */
 esp_err_t esp_bt_sleep_disable(void);
 
-/**
- * @brief to check whether bluetooth controller is sleeping at the instant, if modem sleep is enabled
- *
- * Note that this function shall not be invoked before esp_bt_controller_enable()
- * This function is supposed to be used ORIG mode of modem sleep
- *
- * @return  true if in modem sleep state, false otherwise
- */
-bool esp_bt_controller_is_sleeping(void);
-
-/**
- * @brief request controller to wakeup from sleeping state during sleep mode
- *
- * Note that this function shall not be invoked before esp_bt_controller_enable()
- * Note that this function is supposed to be used ORIG mode of modem sleep
- * Note that after this request, bluetooth controller may again enter sleep as long as the modem sleep is enabled
- *
- * Profiling shows that it takes several milliseconds to wakeup from modem sleep after this request.
- * Generally it takes longer if 32kHz XTAL is used than the main XTAL, due to the lower frequency of the former as the bluetooth low power clock source.
- */
-void esp_bt_controller_wakeup_request(void);
-
 /**
  * @brief Manually clear scan duplicate list
  *

tools/sdk/include/bt/esp_gap_ble_api.h

@@ -287,6 +287,8 @@ typedef enum {
     ESP_BLE_SM_ONLY_ACCEPT_SPECIFIED_SEC_AUTH,
     /* Enable/Disable OOB support */
     ESP_BLE_SM_OOB_SUPPORT,
+    /* Appl encryption key size */
+    ESP_BLE_APP_ENC_KEY_SIZE,
     ESP_BLE_SM_MAX_PARAM,
 } esp_ble_sm_param_t;
 
@@ -895,7 +897,7 @@ esp_err_t esp_ble_gap_update_conn_params(esp_ble_conn_update_params_t *params);
 esp_err_t esp_ble_gap_set_pkt_data_len(esp_bd_addr_t remote_device, uint16_t tx_data_length);
 
 /**
- * @brief           This function sets the random address for the application
+ * @brief           This function sets the static Random Address and Non-Resolvable Private Address for the application
  *
  * @param[in]       rand_addr: the random address which should be setting
  *
@@ -1243,6 +1245,18 @@ esp_err_t esp_ble_oob_req_reply(esp_bd_addr_t bd_addr, uint8_t *TK, uint8_t len)
 */
 esp_err_t esp_ble_gap_disconnect(esp_bd_addr_t remote_device);
 
+
+/**
+* @brief           This function is called to authorized a link after Authentication(MITM protection)
+*
+* @param[in]       bd_addr: BD address of the peer device.
+* @param[out]      authorize: Authorized the link or not.
+*
+* @return          - ESP_OK : success
+*                  - other  : failed
+*
+*/
+esp_err_t esp_gap_ble_set_authorization(esp_bd_addr_t bd_addr, bool authorize);
 #ifdef __cplusplus
 }
 #endif

tools/sdk/include/bt/esp_gatt_defs.h

@@ -278,6 +278,8 @@ typedef enum {
 #define    ESP_GATT_PERM_WRITE_ENC_MITM        (1 << 6)   /* bit 6 -  0x0040 */    /* relate to BTA_GATT_PERM_WRITE_ENC_MITM in bta/bta_gatt_api.h */
 #define    ESP_GATT_PERM_WRITE_SIGNED          (1 << 7)   /* bit 7 -  0x0080 */    /* relate to BTA_GATT_PERM_WRITE_SIGNED in bta/bta_gatt_api.h */
 #define    ESP_GATT_PERM_WRITE_SIGNED_MITM     (1 << 8)   /* bit 8 -  0x0100 */    /* relate to BTA_GATT_PERM_WRITE_SIGNED_MITM in bta/bta_gatt_api.h */
+#define    ESP_GATT_PERM_READ_AUTHORIZATION    (1 << 9)   /* bit 9 -  0x0200 */
+#define    ESP_GATT_PERM_WRITE_AUTHORIZATION   (1 << 10)  /* bit 10 - 0x0400 */
 typedef uint16_t esp_gatt_perm_t;
 
 /* relate to BTA_GATT_CHAR_PROP_BIT_xxx in bta/bta_gatt_api.h */

tools/sdk/include/bt/esp_gattc_api.h

@@ -603,6 +603,29 @@ esp_err_t esp_ble_gattc_read_char (esp_gatt_if_t gattc_if,
                                    uint16_t conn_id,
                                    uint16_t handle,
                                    esp_gatt_auth_req_t auth_req);
+/**
+ * @brief           This function is called to read a service's characteristics of
+ *                  the given characteristic UUID
+ *
+ * @param[in]       gattc_if: Gatt client access interface.
+ * @param[in]       conn_id : connection ID.
+ * @param[in]       start_handle : the attribute start handle.
+ * @param[in]       end_handle : the attribute end handle
+ * @param[in]       uuid : The UUID of attribute which will be read.
+ * @param[in]       auth_req : authenticate request type
+ *
+ * @return
+ *                  - ESP_OK: success
+ *                  - other: failed
+ *
+ */
+esp_err_t esp_ble_gattc_read_by_type (esp_gatt_if_t gattc_if,
+                                      uint16_t conn_id,
+                                      uint16_t start_handle,
+                                      uint16_t end_handle,
+                                      esp_bt_uuid_t *uuid,
+                                      esp_gatt_auth_req_t auth_req);
+
 
 /**
  * @brief           This function is called to read multiple characteristic or

tools/sdk/include/bt/esp_spp_api.h

@@ -27,7 +27,10 @@ typedef enum {
     ESP_SPP_FAILURE,                /*!< Generic failure. */
     ESP_SPP_BUSY,                   /*!< Temporarily can not handle this request. */
     ESP_SPP_NO_DATA,                /*!< no data. */
-    ESP_SPP_NO_RESOURCE             /*!< No more set pm control block */
+    ESP_SPP_NO_RESOURCE,            /*!< No more resource */
+    ESP_SPP_NEED_INIT,              /*!< SPP module shall init first */
+    ESP_SPP_NEED_DEINIT,            /*!< SPP module shall deinit first */
+    ESP_SPP_NO_CONNECTION,          /*!< connection may have been closed */
 } esp_spp_status_t;
 
 /* Security Setting Mask, Suggest to use ESP_SPP_SEC_NONE, ESP_SPP_SEC_AUTHORIZE or ESP_SPP_SEC_AUTHENTICATE only.*/

tools/sdk/include/config/sdkconfig.h

@@ -87,6 +87,7 @@
 #define CONFIG_MFN56_1X 1
 #define CONFIG_LWIP_MAX_SOCKETS 10
 #define CONFIG_LWIP_NETIF_LOOPBACK 1
+#define CONFIG_LWIP_TCP_ISN_HOOK 1
 #define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT "pthread"
 #define CONFIG_EMAC_TASK_PRIORITY 20
 #define CONFIG_TIMER_TASK_STACK_DEPTH 2048
@@ -143,6 +144,7 @@
 #define CONFIG_MBEDTLS_PSK_MODES 1
 #define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO 1
 #define CONFIG_LWIP_DHCPS_LEASE_UNIT 60
+#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1
 #define CONFIG_EFUSE_MAX_BLK_LEN 192
 #define CONFIG_SPIFFS_USE_MAGIC 1
 #define CONFIG_OV7725_SUPPORT 1
@@ -170,6 +172,7 @@
 #define CONFIG_ESP32_REV_MIN_0 1
 #define CONFIG_LOG_DEFAULT_LEVEL 1
 #define CONFIG_TIMER_QUEUE_LENGTH 10
+#define CONFIG_ARDUINO_LOOP_STACK_SIZE 8192
 #define CONFIG_ESP32_REV_MIN 0
 #define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT 1
 #define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE 0
@@ -244,7 +247,6 @@
 #define CONFIG_SPIFFS_GC_MAX_RUNS 10
 #define CONFIG_ARDUINO_RUN_CORE1 1
 #define CONFIG_ESP32_APPTRACE_DEST_NONE 1
-#define CONFIG_ESP32_WIFI_RX_IRAM_OPT 1
 #define CONFIG_HP_NANO1 1
 #define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1
 #define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1
@@ -371,6 +373,7 @@
 #define CONFIG_SPIFFS_PAGE_SIZE 256
 #define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1
 #define CONFIG_ESP32_DPORT_WORKAROUND 1
+#define CONFIG_GATTS_BLUFI_ENABLE 1
 #define CONFIG_PPP_MSCHAP_SUPPORT 1
 #define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 1
 #define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT 2048
@@ -392,7 +395,6 @@
 #define CONFIG_HD_NANO1 1
 #define CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG 1
 #define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR 1
-#define CONFIG_ESP32_WIFI_IRAM_OPT 1
 #define CONFIG_FATFS_API_ENCODING_ANSI_OEM 1
-#define CONFIG_ARDUINO_IDF_COMMIT "66d3783c8"
+#define CONFIG_ARDUINO_IDF_COMMIT "cd59d107b"
 #define CONFIG_ARDUINO_IDF_BRANCH "release/v3.3"

tools/sdk/include/driver/driver/adc.h

@@ -228,14 +228,32 @@ int adc1_get_voltage(adc1_channel_t channel) __attribute__((deprecated));
 
 /**
  * @brief Enable ADC power
+ * @deprecated Use adc_power_acquire and adc_power_release instead.
  */
-void adc_power_on();
+void adc_power_on(void) __attribute__((deprecated));
 
 /**
  * @brief Power off SAR ADC
- * This function will force power down for ADC
+ * @deprecated Use adc_power_acquire and adc_power_release instead.
+ * This function will force power down for ADC.
+ * This function is deprecated because forcing power ADC power off may
+ * disrupt operation of other components which may be using the ADC.
  */
-void adc_power_off();
+void adc_power_off(void) __attribute__((deprecated));
+
+/**
+ * @brief Increment the usage counter for ADC module.
+ * ADC will stay powered on while the counter is greater than 0.
+ * Call adc_power_release when done using the ADC.
+ */
+void adc_power_acquire(void);
+
+/**
+ * @brief Decrement the usage counter for ADC module.
+ * ADC will stay powered on while the counter is greater than 0.
+ * Call this function when done using the ADC.
+ */
+void adc_power_release(void);
 
 /**
  * @brief Initialize ADC pad

tools/sdk/include/driver/driver/can.h

@@ -37,7 +37,8 @@ extern "C" {
 #define CAN_GENERAL_CONFIG_DEFAULT(tx_io_num, rx_io_num, op_mode) {.mode = op_mode, .tx_io = tx_io_num, .rx_io = rx_io_num,       \
                                                                    .clkout_io = CAN_IO_UNUSED, .bus_off_io = CAN_IO_UNUSED,       \
                                                                    .tx_queue_len = 5, .rx_queue_len = 5,                          \
-                                                                   .alerts_enabled = CAN_ALERT_NONE,  .clkout_divider = 0,        }
+                                                                   .alerts_enabled = CAN_ALERT_NONE,  .clkout_divider = 0,        \
+                                                                   .intr_flags = ESP_INTR_FLAG_LEVEL1}
 
 /**
  * @brief Initializer macros for timing configuration structure
@@ -91,7 +92,7 @@ extern "C" {
 #define CAN_ALERT_BUS_OFF               0x1000      /**< Alert(4096): Bus-off condition occurred. CAN controller can no longer influence bus */
 #define CAN_ALERT_ALL                   0x1FFF      /**< Bit mask to enable all alerts during configuration */
 #define CAN_ALERT_NONE                  0x0000      /**< Bit mask to disable all alerts during configuration */
-#define CAN_ALERT_AND_LOG               0x2000      /**< Bit mask to enable alerts to also be logged when they occur */
+#define CAN_ALERT_AND_LOG               0x2000      /**< Bit mask to enable alerts to also be logged when they occur. Note that logging from the ISR is disabled if CONFIG_TWAI_ISR_IN_IRAM is enabled. */
 
 /**
  * @brief   Message flags
@@ -151,6 +152,7 @@ typedef struct {
     uint32_t rx_queue_len;          /**< Number of messages RX queue can hold */
     uint32_t alerts_enabled;        /**< Bit field of alerts to enable (see documentation) */
     uint32_t clkout_divider;        /**< CLKOUT divider. Can be 1 or any even number from 2 to 14 (optional, set to 0 if unused) */
+    int intr_flags;                 /**< Interrupt flags to set the priority of the driver's ISR. Note that to use the ESP_INTR_FLAG_IRAM, the CONFIG_CAN_ISR_IN_IRAM option should be enabled first. */
 } can_general_config_t;
 
 /**

tools/sdk/include/driver/driver/gpio.h

@@ -276,9 +276,11 @@ esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type);
 /**
  * @brief  Enable GPIO module interrupt signal
  *
- * @note Please do not use the interrupt of GPIO36 and GPIO39 when using ADC.
+ * @note Please do not use the interrupt of GPIO36 and GPIO39 when using ADC or Wi-Fi with sleep mode enabled.
  *       Please refer to the comments of `adc1_get_raw`.
  *       Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
+ *       As a workaround, call adc_power_acquire() in the app. This will result in higher power consumption (by ~1mA),
+ *       but will remove the glitches on GPIO36 and GPIO39.
  *
  * @param  gpio_num GPIO number. If you want to enable an interrupt on e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
  *

tools/sdk/include/efuse/esp_efuse.h

@@ -301,6 +301,23 @@ void esp_efuse_disable_basic_rom_console(void);
  */
 esp_err_t esp_efuse_apply_34_encoding(const uint8_t *in_bytes, uint32_t *out_words, size_t in_bytes_len);
 
+/* @brief Disable ROM Download Mode via eFuse
+ *
+ * Permanently disables the ROM Download Mode feature. Once disabled, if the SoC is booted with
+ * strapping pins set for ROM Download Mode then an error is printed instead.
+ *
+ * @note Not all SoCs support this option. An error will be returned if called on an ESP32
+ * with a silicon revision lower than 3, as these revisions do not support this option.
+ *
+ * @note If ROM Download Mode is already disabled, this function does nothing and returns success.
+ *
+ * @return
+ * - ESP_OK If the eFuse was successfully burned, or had already been burned.
+ * - ESP_ERR_NOT_SUPPORTED (ESP32 only) This SoC is not capable of disabling UART download mode
+ * - ESP_ERR_INVALID_STATE (ESP32 only) This eFuse is write protected and cannot be written
+ */
+esp_err_t esp_efuse_disable_rom_download_mode(void);
+
 /* @brief Write random data to efuse key block write registers
  *
  * @note Caller is responsible for ensuring efuse

tools/sdk/include/efuse/esp_efuse_table.h

@@ -17,7 +17,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table 2e23344575b3d07f01ecb695294e9770
+// md5_digest_table 11b691b6fa8546a3862a7a876be5f758
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -36,9 +36,10 @@ extern const esp_efuse_desc_t* ESP_EFUSE_ENCRYPT_CONFIG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_ENCRYPT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_DECRYPT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_CACHE[];
+extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_CRYPT_CNT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_JTAG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_CONSOLE_DEBUG_DISABLE[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_CRYPT_CNT[];
+extern const esp_efuse_desc_t* ESP_EFUSE_UART_DOWNLOAD_DIS[];
 extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_FLASH_CRYPT_CNT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_BLK1[];
 extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_BLK2[];

tools/sdk/include/esp-tls/esp_tls.h

@@ -135,6 +135,8 @@ typedef struct esp_tls {
     fd_set rset;                                                                /*!< read file descriptors */
 
     fd_set wset;                                                                /*!< write file descriptors */
+
+    bool is_tls;                                                                /*!< indicates connection type (TLS or NON-TLS) */
 } esp_tls_t;
 
 /**

tools/sdk/include/esp32/esp_coexist.h

@@ -84,21 +84,6 @@ esp_err_t esp_coex_status_bit_set(esp_coex_status_type_t type, uint32_t status);
  */
 esp_err_t esp_coex_status_bit_clear(esp_coex_status_type_t type, uint32_t status);
 
-/**
- * @brief Enable BLE connection dynamic priority
- * @attention If the parameter is true, BLE connection performance will be better but WiFi performance
- *            will be poorer. And vice versa.
- * @param low_interval : true - Increase BLE connection priority to be higher than WiFi's when BLE
- *                              connection interval is less or equal than 50 ms. The default value
- *                              is false.
- *                       false - not increace
- * @param high_interval : true - Increase BLE connection priority to be higher than WiFi's when BLE
- *                               connection interval is more than 50 ms. The default value is true.
- *                        false - not increace
- * @return : ESP_OK - success, other - failed
- */
-esp_err_t esp_coex_ble_conn_dynamic_prio_enable(bool low_interval, bool high_interval);
-
 #ifdef __cplusplus
 }
 #endif

tools/sdk/include/esp32/esp_coexist_internal.h

@@ -112,44 +112,73 @@ int coex_wifi_request(uint32_t event, uint32_t latency, uint32_t duration);
 int coex_wifi_release(uint32_t event);
 
 /**
- * @brief Blue tooth requests coexistence.
+ * @brief Set WiFi channel to coexistence module.
  *
- *  @param event : blue tooth event
- *  @param latency : blue tooth will request coexistence after latency
- *  @param duration : duration for blue tooth to request coexistence
+ *  @param primary : WiFi primary channel
+ *  @param secondary : WiFi secondary channel
  *  @return : 0 - success, other - failed
  */
-int coex_bt_request(uint32_t event, uint32_t latency, uint32_t duration);
+int coex_wifi_channel_set(uint8_t primary, uint8_t secondary);
 
 /**
- * @brief Blue tooth release coexistence.
+ * @brief Clear coexistence status.
  *
- *  @param event : blue tooth event
+ *  @param type : Coexistence status type
+ *  @param status: Coexistence status
+ */
+void coex_schm_status_bit_clear(uint32_t type, uint32_t status);
+
+/**
+ * @brief Set coexistence status.
+ *
+ *  @param type : Coexistence status type
+ *  @param status: Coexistence status
+ */
+void coex_schm_status_bit_set(uint32_t type, uint32_t status);
+
+/**
+ * @brief Set coexistence scheme interval.
+ *
+ *  @param interval : Coexistence scheme interval
  *  @return : 0 - success, other - failed
  */
-int coex_bt_release(uint32_t event);
+int coex_schm_interval_set(uint32_t interval);
 
 /**
- * @brief Register callback function for blue tooth.
+ * @brief Get coexistence scheme interval.
  *
- *  @param cb : callback function
+ *  @return : Coexistence scheme interval
+ */
+uint32_t coex_schm_interval_get(void);
+
+/**
+ * @brief Get current coexistence scheme period.
+ *
+ *  @return : Coexistence scheme period
+ */
+uint8_t coex_schm_curr_period_get(void);
+
+/**
+ * @brief Get current coexistence scheme phase.
+ *
+ *  @return : Coexistence scheme phase
+ */
+void * coex_schm_curr_phase_get(void);
+
+/**
+ * @brief Set current coexistence scheme phase index.
+ *
+ *  @param interval : Coexistence scheme phase index
  *  @return : 0 - success, other - failed
  */
-int coex_register_bt_cb(coex_func_cb_t cb);
+int coex_schm_curr_phase_idx_set(int idx);
 
 /**
- * @brief Lock before reset base band.
+ * @brief Get current coexistence scheme phase index.
  *
- *  @return : lock value
+ *  @return : Coexistence scheme phase index
  */
-uint32_t coex_bb_reset_lock(void);
-
-/**
- * @brief Unlock after reset base band.
- *
- *  @param restore : lock value
- */
-void coex_bb_reset_unlock(uint32_t restore);
+int coex_schm_curr_phase_idx_get(void);
 
 /**
  * @brief Register coexistence adapter functions.

tools/sdk/include/esp32/esp_mesh_internal.h

@@ -263,6 +263,16 @@ esp_err_t esp_mesh_set_announce_interval(int short_ms, int long_ms);
  */
 esp_err_t esp_mesh_get_announce_interval(int *short_ms, int *long_ms);
 
+/**
+ * @brief      Enable mesh print scan result
+ *
+ * @param[in]  enable  enable or not
+ *
+ * @return
+ *    - ESP_OK
+ */
+esp_err_t esp_mesh_print_scan_result(bool enable);
+
 #ifdef __cplusplus
 }
 #endif

tools/sdk/include/esp32/esp_now.h

@@ -252,7 +252,7 @@ esp_err_t esp_now_mod_peer(const esp_now_peer_info_t *peer);
 esp_err_t esp_now_get_peer(const uint8_t *peer_addr, esp_now_peer_info_t *peer);
 
 /**
-  * @brief     Fetch a peer from peer list
+  * @brief     Fetch a peer from peer list. Only return the peer which address is unicast, for the multicast/broadcast address, the function will ignore and try to find the next in the peer list.
   *
   * @param     from_head  fetch from head of list or not
   * @param     peer  peer information

tools/sdk/include/esp32/esp_panic.h

@@ -20,6 +20,7 @@ extern "C"
 #ifndef __ASSEMBLER__
 
 #include "esp_err.h"
+#include "soc/soc.h"
 
 
 /**
@@ -61,12 +62,36 @@ esp_err_t esp_set_watchpoint(int no, void *adr, int size, int flags);
  */
 void esp_clear_watchpoint(int no);
 
+/**
+ * @brief Checks stack pointer in dram
+ */
+inline static bool esp_stack_ptr_in_dram(uint32_t sp)
+{
+    //Check if stack ptr is in between SOC_DRAM_LOW and SOC_DRAM_HIGH, and 16 byte aligned.
+    return !(sp < SOC_DRAM_LOW + 0x10 || sp > SOC_DRAM_HIGH - 0x10 || ((sp & 0xF) != 0));
+}
+
+#if CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
+/**
+ * @brief Checks stack pointer in external ram
+ */
+inline static bool esp_stack_ptr_in_extram(uint32_t sp)
+{
+    //Check if stack ptr is in between SOC_EXTRAM_DATA_LOW and SOC_EXTRAM_DATA_HIGH, and 16 byte aligned.
+    return !(sp < SOC_EXTRAM_DATA_LOW + 0x10 || sp > SOC_EXTRAM_DATA_HIGH - 0x10 || ((sp & 0xF) != 0));
+}
+#endif
+
 /**
  * @brief Checks stack pointer
  */
 static inline bool esp_stack_ptr_is_sane(uint32_t sp)
 {
-	return !(sp < 0x3ffae010UL || sp > 0x3ffffff0UL || ((sp & 0xf) != 0));
+#if CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
+    return (esp_stack_ptr_in_dram(sp) || esp_stack_ptr_in_extram(sp));
+#else
+    return esp_stack_ptr_in_dram(sp);
+#endif
 }
 #endif
 

tools/sdk/include/esp32/esp_sleep.h

@@ -89,10 +89,8 @@ esp_err_t esp_sleep_disable_wakeup_source(esp_sleep_source_t source);
 
 /**
  * @brief Enable wakeup by ULP coprocessor
- * @note In revisions 0 and 1 of the ESP32, ULP wakeup source
- *       can not be used when RTC_PERIPH power domain is forced
- *       to be powered on (ESP_PD_OPTION_ON) or when ext0 wakeup
- *       source is used.
+ * @note ULP wakeup source cannot be used when RTC_PERIPH power domain is forced
+ *       to be powered on (ESP_PD_OPTION_ON) or when ext0 wakeup source is used.
  * @return
  *      - ESP_OK on success
  *      - ESP_ERR_NOT_SUPPORTED if additional current by touch (CONFIG_ESP32_RTC_EXTERNAL_CRYSTAL_ADDITIONAL_CURRENT) is enabled.
@@ -112,8 +110,7 @@ esp_err_t esp_sleep_enable_timer_wakeup(uint64_t time_in_us);
 /**
  * @brief Enable wakeup by touch sensor
  *
- * @note In revisions 0 and 1 of the ESP32, touch wakeup source
- *       can not be used when RTC_PERIPH power domain is forced
+ * @note Touch wakeup source cannot be used when RTC_PERIPH power domain is forced
  *       to be powered on (ESP_PD_OPTION_ON) or when ext0 wakeup
  *       source is used.
  *
@@ -148,8 +145,7 @@ touch_pad_t esp_sleep_get_touchpad_wakeup_status();
  * @note This function does not modify pin configuration. The pin is
  *       configured in esp_sleep_start, immediately before entering sleep mode.
  *
- * @note In revisions 0 and 1 of the ESP32, ext0 wakeup source
- *       can not be used together with touch or ULP wakeup sources.
+ * @note ext0 wakeup source cannot be used together with touch or ULP wakeup sources.
  *
  * @param gpio_num  GPIO number used as wakeup source. Only GPIOs which are have RTC
  *             functionality can be used: 0,2,4,12-15,25-27,32-39.
@@ -206,8 +202,7 @@ esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t mask, esp_sleep_ext1_wakeup_mode
  * wakeup level, for each GPIO which is used for wakeup.
  * Then call this function to enable wakeup feature.
  *
- * @note In revisions 0 and 1 of the ESP32, GPIO wakeup source
- *       can not be used together with touch or ULP wakeup sources.
+ * @note GPIO wakeup source cannot be used together with touch or ULP wakeup sources.
  *
  * @return
  *      - ESP_OK on success

tools/sdk/include/esp32/esp_wifi.h

@@ -85,7 +85,7 @@ extern "C" {
 #define ESP_ERR_WIFI_NOT_CONNECT (ESP_ERR_WIFI_BASE + 15)  /*!< Station still in disconnect status */
 
 #define ESP_ERR_WIFI_POST        (ESP_ERR_WIFI_BASE + 18)  /*!< Failed to post the event to WiFi task */
-#define ESP_ERR_WIFI_INIT_STATE  (ESP_ERR_WIFI_BASE + 19)  /*!< Invalod WiFi state when init/deinit is called */
+#define ESP_ERR_WIFI_INIT_STATE  (ESP_ERR_WIFI_BASE + 19)  /*!< Invalid WiFi state when init/deinit is called */
 #define ESP_ERR_WIFI_STOP_STATE  (ESP_ERR_WIFI_BASE + 20)  /*!< Returned when WiFi is stopping */
 
 /**
@@ -110,6 +110,7 @@ typedef struct {
     int                    wifi_task_core_id;      /**< WiFi Task Core ID */
     int                    beacon_max_len;         /**< WiFi softAP maximum length of the beacon */
     int                    mgmt_sbuf_num;          /**< WiFi management short buffer number, the minimum value is 6, the maximum value is 32 */
+    uint64_t               feature_caps;           /**< Enables additional WiFi features and capabilities */
     int                    magic;                  /**< WiFi init magic number, it should be the last field */
 } wifi_init_config_t;
 
@@ -156,6 +157,7 @@ typedef struct {
 #endif
 
 extern const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs;
+extern uint64_t g_wifi_feature_caps;
 
 #define WIFI_INIT_CONFIG_MAGIC    0x1F2F3F4F
 
@@ -208,6 +210,7 @@ extern const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs;
     .wifi_task_core_id = WIFI_TASK_CORE_ID,\
     .beacon_max_len = WIFI_SOFTAP_BEACON_MAX_LEN, \
     .mgmt_sbuf_num = WIFI_MGMT_SBUF_NUM, \
+    .feature_caps = g_wifi_feature_caps, \
     .magic = WIFI_INIT_CONFIG_MAGIC\
 };
 
@@ -304,7 +307,7 @@ esp_err_t esp_wifi_stop(void);
  * @brief  Restore WiFi stack persistent settings to default values
  *
  * This function will reset settings made using the following APIs:
- * - esp_wifi_get_auto_connect,
+ * - esp_wifi_set_bandwidth,
  * - esp_wifi_set_protocol,
  * - esp_wifi_set_config related
  * - esp_wifi_set_mode
@@ -904,32 +907,8 @@ esp_err_t esp_wifi_set_vendor_ie_cb(esp_vendor_ie_cb_t cb, void *ctx);
   * @attention 3. Mapping Table {Power, max_tx_power} = {{8,   2}, {20,  5}, {28,  7}, {34,  8}, {44, 11},
   *                                                      {52, 13}, {56, 14}, {60, 15}, {66, 16}, {72, 18}, {78, 20}}.
   * @attention 4. Param power unit is 0.25dBm, range is [8, 78] corresponding to 2dBm - 20dBm.
-  * @attention 5. Relationship between set value and actual value. As follows:
-  *              +------------+--------------+
-  *              | set value  | actual value |
-  *              +============+==============+
-  *              |  [8,  19]  |      8       |
-  *              +------------+--------------+
-  *              |  [20, 27]  |      20      |
-  *              +------------+--------------+
-  *              |  [28, 33]  |      28      |
-  *              +------------+--------------+
-  *              |  [34, 43]  |      34      |
-  *              +------------+--------------+
-  *              |  [44, 51]  |      44      |
-  *              +------------+--------------+
-  *              |  [52, 55]  |      52      |
-  *              +------------+--------------+
-  *              |  [56, 59]  |      56      |
-  *              +------------+--------------+
-  *              |  [60, 65]  |      60      |
-  *              +------------+--------------+
-  *              |  [66, 71]  |      66      |
-  *              +------------+--------------+
-  *              |  [72, 77]  |      72      |
-  *              +------------+--------------+
-  *              |     78     |      78      |
-  *              +------------+--------------+
+  * @attention 5. Relationship between set value and actual value. As follows: {set value range, actual value} = {{[8,  19],8}, {[20, 27],20}, {[28, 33],28}, {[34, 43],34}, {[44, 51],44}, {[52, 55],52}, {[56, 59],56}, {[60, 65],60}, {[66, 71],66}, {[72, 77],72}, {78,78}}
+  *
   * @param     power  Maximum WiFi transmitting power.
   *
   * @return
@@ -1144,6 +1123,17 @@ esp_err_t esp_wifi_set_inactive_time(wifi_interface_t ifx, uint16_t sec);
   */
 esp_err_t esp_wifi_get_inactive_time(wifi_interface_t ifx, uint16_t *sec);
 
+/**
+  * @brief     Dump WiFi statistics
+  *
+  * @param     modules statistic modules to be dumped
+  *
+  * @return
+  *    - ESP_OK: succeed
+  *    - others: failed
+  */
+esp_err_t esp_wifi_statis_dump(uint32_t modules);
+
 #ifdef __cplusplus
 }
 #endif

tools/sdk/include/esp32/esp_wifi_internal.h

@@ -51,7 +51,8 @@ typedef struct {
   *
   */
 typedef enum {
-    WIFI_LOG_ERROR = 0,   /*enabled by default*/
+    WIFI_LOG_NONE = 0,
+    WIFI_LOG_ERROR,       /*enabled by default*/
     WIFI_LOG_WARNING,     /*enabled by default*/
     WIFI_LOG_INFO,        /*enabled by default*/
     WIFI_LOG_DEBUG,       /*can be set in menuconfig*/

tools/sdk/include/esp32/esp_wifi_os_adapter.h

@@ -21,7 +21,7 @@
 extern "C" {
 #endif
 
-#define ESP_WIFI_OS_ADAPTER_VERSION  0x00000004
+#define ESP_WIFI_OS_ADAPTER_VERSION  0x00000005
 #define ESP_WIFI_OS_ADAPTER_MAGIC    0xDEADBEAF
 
 #define OSI_FUNCS_TIME_BLOCKING      0xffffffff
@@ -127,6 +127,15 @@ typedef struct {
     void (* _coex_condition_set)(uint32_t type, bool dissatisfy);
     int32_t (* _coex_wifi_request)(uint32_t event, uint32_t latency, uint32_t duration);
     int32_t (* _coex_wifi_release)(uint32_t event);
+    int (* _coex_wifi_channel_set)(uint8_t primary, uint8_t secondary);
+    void (* _coex_schm_status_bit_clear)(uint32_t type, uint32_t status);
+    void (* _coex_schm_status_bit_set)(uint32_t type, uint32_t status);
+    int (* _coex_schm_interval_set)(uint32_t interval);
+    uint32_t (* _coex_schm_interval_get)(void);
+    uint8_t (* _coex_schm_curr_period_get)(void);
+    void * (* _coex_schm_curr_phase_get)(void);
+    int (* _coex_schm_curr_phase_idx_set)(int idx);
+    int (* _coex_schm_curr_phase_idx_get)(void);
     int32_t _magic;
 } wifi_osi_funcs_t;
 

tools/sdk/include/esp32/esp_wifi_types.h

@@ -216,7 +216,7 @@ typedef struct {
     wifi_auth_mode_t authmode;  /**< Auth mode of ESP32 soft-AP. Do not support AUTH_WEP in soft-AP mode */
     uint8_t ssid_hidden;        /**< Broadcast SSID or not, default 0, broadcast the SSID */
     uint8_t max_connection;     /**< Max number of stations allowed to connect in, default 4, max 10 */
-    uint16_t beacon_interval;   /**< Beacon interval, 100 ~ 60000 ms, default 100 ms */
+    uint16_t beacon_interval;   /**< Beacon interval which should be multiples of 100. Unit: TU(time unit, 1 TU = 1024 us). Range: 100 ~ 60000. Default value: 100 */
 } wifi_ap_config_t;
 
 /** @brief STA configuration settings for the ESP32 */
@@ -520,6 +520,12 @@ typedef struct {
     } data;                             /**< Configuration of ioctl command */
 } wifi_ioctl_config_t;
 
+#define WIFI_STATIS_BUFFER    (1<<0)
+#define WIFI_STATIS_RXTX      (1<<1)
+#define WIFI_STATIS_HW        (1<<2)
+#define WIFI_STATIS_DIAG      (1<<3)
+#define WIFI_STATIS_ALL       (-1)
+
 #ifdef __cplusplus
 }
 #endif

tools/sdk/include/esp32/rom/spi_flash.h

@@ -538,6 +538,13 @@ esp_rom_spiflash_result_t esp_rom_spiflash_wait_idle(esp_rom_spiflash_chip_t *sp
  */
 void esp_rom_spiflash_select_qio_pins(uint8_t wp_gpio_num, uint32_t spiconfig);
 
+/**
+ * @brief Clear WEL bit unconditionally.
+ *
+ * @return always ESP_ROM_SPIFLASH_RESULT_OK
+ */
+esp_rom_spiflash_result_t esp_rom_spiflash_write_disable(void);
+
 /** @brief Global esp_rom_spiflash_chip_t structure used by ROM functions
  *
  */

tools/sdk/include/esp_http_client/esp_http_client.h

@@ -108,6 +108,7 @@ typedef struct {
     const char                  *cert_pem;           /*!< SSL server certification, PEM format as string, if the client requires to verify server */
     const char                  *client_cert_pem;    /*!< SSL client certification, PEM format as string, if the server requires to verify client */
     const char                  *client_key_pem;     /*!< SSL client key, PEM format as string, if the server requires to verify client */
+    const char                  *user_agent;         /*!< The User Agent string to send with HTTP requests */
     esp_http_client_method_t    method;                   /*!< HTTP Method */
     int                         timeout_ms;               /*!< Network timeout in milliseconds */
     bool                        disable_auto_redirect;    /*!< Disable HTTP automatic redirects */
@@ -125,7 +126,11 @@ typedef struct {
  * Enum for the HTTP status codes.
  */
 typedef enum {
+    /* 2xx - Success */
+    HttpStatus_Ok                = 200,
+
     /* 3xx - Redirection */
+    HttpStatus_MultipleChoices   = 300,
     HttpStatus_MovedPermanently  = 301,
     HttpStatus_Found             = 302,
 

tools/sdk/include/lwip/lwipopts.h

@@ -396,6 +396,17 @@
  */
 #define LWIP_TCP_RTO_TIME             CONFIG_LWIP_TCP_RTO_TIME
 
+/**
+ * Set TCP hook for Initial Sequence Number (ISN)
+ */
+#ifdef CONFIG_LWIP_TCP_ISN_HOOK
+#include <lwip/arch.h>
+struct ip_addr;
+u32_t lwip_hook_tcp_isn(const struct ip_addr *local_ip, u16_t local_port,
+                        const struct ip_addr *remote_ip, u16_t remote_port);
+#define LWIP_HOOK_TCP_ISN               lwip_hook_tcp_isn
+#endif
+
 /*
    ----------------------------------
    ---------- Pbuf options ----------
@@ -767,6 +778,11 @@
  */
 #define TCPIP_DEBUG                     LWIP_DBG_OFF
 
+/**
+ * TCP_OOSEQ_DEBUG: Enable debugging in tcpin.c for OOSEQ.
+ */
+#define TCP_OOSEQ_DEBUG                 LWIP_DBG_OFF
+
 /**
  * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
  * updated with the source MAC and IP addresses supplied in the packet.

tools/sdk/include/lwip/netdb.h

@@ -32,9 +32,17 @@
 
 #include "lwip/netdb.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+  
 #ifdef ESP_PLATFORM
 int getnameinfo(const struct sockaddr *addr, socklen_t addrlen,
                 char *host, socklen_t hostlen,
                 char *serv, socklen_t servlen, int flags);
 
 #endif
+
+#ifdef __cplusplus
+}
+#endif

tools/sdk/include/lwip/tcp_isn.h

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2016 The MINIX 3 Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * Author: David van Moolenbroek <david@minix3.org>
+ */
+
+#ifndef LWIP_TCP_ISN_H
+#define LWIP_TCP_ISN_H
+
+#include "lwip/opt.h"
+#include "lwip/ip_addr.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void lwip_init_tcp_isn(u32_t boot_time, const u8_t *secret_16_bytes);
+u32_t lwip_hook_tcp_isn(const ip_addr_t *local_ip, u16_t local_port,
+                        const ip_addr_t *remote_ip, u16_t remote_port);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LWIP_TCP_ISN_H */

tools/sdk/include/mqtt/mqtt_client.h

@@ -80,10 +80,17 @@ typedef enum {
  */
 typedef enum {
     MQTT_ERROR_TYPE_NONE = 0,
-    MQTT_ERROR_TYPE_ESP_TLS,
+    MQTT_ERROR_TYPE_TCP_TRANSPORT,
     MQTT_ERROR_TYPE_CONNECTION_REFUSED,
 } esp_mqtt_error_type_t;
 
+/**
+ * MQTT_ERROR_TYPE_TCP_TRANSPORT error type hold all sorts of transport layer errors,
+ * including ESP-TLS error, but in the past only the errors from MQTT_ERROR_TYPE_ESP_TLS layer
+ * were reported, so the ESP-TLS error type is re-defined here for backward compatibility
+ */
+#define MQTT_ERROR_TYPE_ESP_TLS MQTT_ERROR_TYPE_TCP_TRANSPORT
+
 typedef enum {
     MQTT_TRANSPORT_UNKNOWN = 0x0,
     MQTT_TRANSPORT_OVER_TCP,      /*!< MQTT over TCP, using scheme: ``mqtt`` */
@@ -110,7 +117,7 @@ typedef enum {
  * Use this structure directly checking error_type first and then appropriate error code depending on the source of the error:
  *
  * | error_type | related member variables | note |
- * | MQTT_ERROR_TYPE_ESP_TLS | esp_tls_last_esp_err, esp_tls_stack_err, esp_tls_cert_verify_flags | Error reported from esp-tls |
+ * | MQTT_ERROR_TYPE_TCP_TRANSPORT | esp_tls_last_esp_err, esp_tls_stack_err, esp_tls_cert_verify_flags, sock_errno | Error reported from tcp_transport/esp-tls |
  * | MQTT_ERROR_TYPE_CONNECTION_REFUSED | connect_return_code | Internal error reported from MQTT broker on connection |
  */
 typedef struct esp_mqtt_error_codes {
@@ -121,6 +128,9 @@ typedef struct esp_mqtt_error_codes {
     /* esp-mqtt specific structure extension */
     esp_mqtt_error_type_t error_type;            /*!< error type referring to the source of the error */
     esp_mqtt_connect_return_code_t connect_return_code; /*!< connection refused error code reported from MQTT broker on connection */
+    /* tcp_transport extension */
+    int       esp_transport_sock_errno;         /*!< errno from the underlying socket */
+
 } esp_mqtt_error_codes_t;
 
 /**
@@ -179,7 +189,7 @@ typedef struct {
     int refresh_connection_after_ms;        /*!< Refresh connection after this value (in milliseconds) */
     const struct psk_key_hint* psk_hint_key;     /*!< Pointer to PSK struct defined in esp_tls.h to enable PSK authentication (as alternative to certificate verification). If not NULL and server/client certificates are NULL, PSK is enabled */
     bool          use_global_ca_store;      /*!< Use a global ca_store for all the connections in which this bool is set. */
-    int reconnect_timeout_ms;               /*!< Reconnect to the broker after this value in miliseconds if auto reconnect is not disabled */
+    int reconnect_timeout_ms;               /*!< Reconnect to the broker after this value in miliseconds if auto reconnect is not disabled (defaults to 10s) */
     const char **alpn_protos;               /*!< NULL-terminated list of supported application protocols to be used for ALPN */
     const char *clientkey_password;         /*!< Client key decryption password string */
     int clientkey_password_len;             /*!< String length of the password pointed to by clientkey_password */
@@ -188,6 +198,8 @@ typedef struct {
     bool skip_cert_common_name_check;       /*!< Skip any validation of server certificate CN field, this reduces the security of TLS and makes the mqtt client susceptible to MITM attacks  */
     bool use_secure_element;                /*!< enable secure element for enabling SSL connection */
     void *ds_data;                          /*!< carrier of handle for digital signature parameters */
+    int network_timeout_ms;                 /*!< Abort network operation if it is not completed after this value, in milliseconds (defaults to 10s) */
+    bool disable_keepalive;                 /*!< Set disable_keepalive=true to turn off keep-alive mechanism, false by default (keepalive is active by default). Note: setting the config value `keepalive` to `0` doesn't disable keepalive feature, but uses a default keepalive period */
 } esp_mqtt_client_config_t;
 
 /**
@@ -347,6 +359,14 @@ esp_err_t esp_mqtt_set_config(esp_mqtt_client_handle_t client, const esp_mqtt_cl
  */
 esp_err_t esp_mqtt_client_register_event(esp_mqtt_client_handle_t client, esp_mqtt_event_id_t event, esp_event_handler_t event_handler, void* event_handler_arg);
 
+/**
+ * @brief Get outbox size
+ *
+ * @param client            mqtt client handle
+ * @return outbox size
+ */
+int esp_mqtt_client_get_outbox_size(esp_mqtt_client_handle_t client);
+
 #ifdef __cplusplus
 }
 #endif //__cplusplus

tools/sdk/include/mqtt/mqtt_config.h

@@ -84,8 +84,8 @@
 #endif
 #endif
 
-#ifdef  CONFIG_OUTBOX_EXPIRED_TIMEOUT_MS
-#define OUTBOX_EXPIRED_TIMEOUT_MS   CONFIG_OUTBOX_EXPIRED_TIMEOUT_MS
+#ifdef  CONFIG_MQTT_OUTBOX_EXPIRED_TIMEOUT_MS
+#define OUTBOX_EXPIRED_TIMEOUT_MS   CONFIG_MQTT_OUTBOX_EXPIRED_TIMEOUT_MS
 #else
 #define OUTBOX_EXPIRED_TIMEOUT_MS   (30*1000)
 #endif

tools/sdk/include/mqtt/mqtt_supported_features.h

@@ -56,6 +56,7 @@
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 3, 0)
 // Features supported in 4.3
 #define MQTT_SUPPORTED_FEATURE_DIGITAL_SIGNATURE
+#define MQTT_SUPPORTED_FEATURE_TRANSPORT_SOCK_ERRNO_REPORTING
 #endif
 
 #endif /* ESP_IDF_VERSION */

tools/sdk/include/nvs_flash/nvs_flash.h

@@ -88,30 +88,37 @@ esp_err_t nvs_flash_deinit_partition(const char* partition_label);
 /**
  * @brief Erase the default NVS partition
  *
- * This function erases all contents of the default NVS partition (one with label "nvs")
+ * Erases all contents of the default NVS partition (one with label "nvs").
+ *
+ * @note If the partition is initialized, this function first de-initializes it. Afterwards, the partition has to
+ *       be initialized again to be used.
  *
  * @return
  *      - ESP_OK on success
  *      - ESP_ERR_NOT_FOUND if there is no NVS partition labeled "nvs" in the
  *        partition table
+ *      - different error in case de-initialization fails (shouldn't happen)
  */
 esp_err_t nvs_flash_erase(void);
 
 /**
  * @brief Erase specified NVS partition
  *
- * This function erases all contents of specified NVS partition
+ * Erase all content of a specified NVS partition
  *
- * @param[in]  part_name    Name (label) of the partition to be erased
+ * @note If the partition is initialized, this function first de-initializes it. Afterwards, the partition has to
+ *       be initialized again to be used.
+ *
+ * @param[in]  part_name    Name (label) of the partition which should be erased
  *
  * @return
  *      - ESP_OK on success
  *      - ESP_ERR_NOT_FOUND if there is no NVS partition with the specified name
  *        in the partition table
+ *      - different error in case de-initialization fails (shouldn't happen)
  */
 esp_err_t nvs_flash_erase_partition(const char *part_name);
 
-
 /**
  * @brief Initialize the default NVS partition.
  *

tools/sdk/include/soc/soc/can_struct.h

@@ -147,8 +147,8 @@ typedef struct {
 
 typedef union {
     struct {
-        uint32_t rx_message_counter: 5;                     /* RMC[4:0] RX Message Counter */
-        uint32_t reserved27: 27;                            /* Internal Reserved */
+        uint32_t rx_message_counter: 7;                     /* RMC[6:0] RX Message Counter */
+        uint32_t reserved25: 25;                            /* Internal Reserved */
     };
     uint32_t val;
 } can_rx_msg_cnt_reg_t;

tools/sdk/include/wpa_supplicant/wpa/wpa_debug.h

@@ -47,6 +47,11 @@ void wpa_debug_close_file(void);
  */
 void wpa_debug_print_timestamp(void);
 
+#if CONFIG_WPA_DEBUG_PRINT
+#define DEBUG_PRINT
+#endif
+
+#ifdef DEBUG_PRINT
 /**
  * wpa_printf - conditional printf
  * @level: priority level (MSG_*) of the message
@@ -58,8 +63,17 @@ void wpa_debug_print_timestamp(void);
  *
  * Note: New line '\n' is added to the end of the text when printing to stdout.
  */
-#define  DEBUG_PRINT
-#define   MSG_PRINT
+
+#define wpa_printf(level,fmt, args...) ESP_LOG_LEVEL_LOCAL(level, TAG, fmt, ##args)
+
+static inline void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len)
+{
+
+}
+
+static inline void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, size_t len)
+{
+}
 
 /**
  * wpa_hexdump - conditional hex dump
@@ -72,19 +86,6 @@ void wpa_debug_print_timestamp(void);
  * output may be directed to stdout, stderr, and/or syslog based on
  * configuration. The contents of buf is printed out has hex dump.
  */
-#ifdef DEBUG_PRINT
-#define wpa_printf(level,fmt, args...) ESP_LOG_LEVEL_LOCAL(level, TAG, fmt, ##args)
-
-static inline void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len)
-{
-
-}
-
-static inline void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, size_t len)
-{
-}
-
-
 void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len);
 
 static inline void wpa_hexdump_buf(int level, const char *title,
@@ -148,13 +149,14 @@ void wpa_hexdump_ascii(int level, const char *title, const u8 *buf,
 void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf,
 			   size_t len);
 #else
-#define wpa_printf(level,fmt, args...)
-#define wpa_hexdump(...)
-#define wpa_hexdump_buf(...)
-#define wpa_hexdump_key(...)
-#define wpa_hexdump_buf_key(...)
-#define wpa_hexdump_ascii(...)
-#define wpa_hexdump_ascii_key(...)
+#define wpa_printf(level,fmt, args...) do {} while(0)
+#define wpa_hexdump(...) do {} while(0)
+#define wpa_dump_mem(...) do {} while(0)
+#define wpa_hexdump_buf(...) do {} while(0)
+#define wpa_hexdump_key(...) do {} while(0)
+#define wpa_hexdump_buf_key(...) do {} while(0)
+#define wpa_hexdump_ascii(...) do {} while(0)
+#define wpa_hexdump_ascii_key(...) do {} while(0)
 #endif
 
 #define wpa_auth_logger

tools/sdk/ld/esp32.rom.ld

@@ -724,6 +724,7 @@ PROVIDE ( r_ld_acl_sniff = 0x4003617c );
 PROVIDE ( r_ld_acl_sniff_trans = 0x400360a8 );
 PROVIDE ( r_ld_acl_ssr_set = 0x40036274 );
 PROVIDE ( r_ld_acl_start = 0x40034ddc );
+PROVIDE ( ld_acl_sco_rsvd_check = 0x4002fa94 );
 PROVIDE ( r_ld_acl_stop = 0x4003532c );
 PROVIDE ( r_ld_acl_test_mode_set = 0x40036f24 );
 PROVIDE ( r_ld_acl_timing_accuracy_set = 0x4003673c );