espressif/arduino-esp32
1
0
Fork 1
mirror of https://github.com/0xFEEDC0DE64/arduino-esp32.git synced 2025-11-03 23:51:39 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
81f225a4c56a938b3f18e717ef62eec3ca8fb35e
arduino-esp32/docs/arduino-ide/windows.md
Pranav Cherukupalli e6ba0f6281 DOCUMENTATION: Moved installation instructions to separate page (#561) 
* DOCUMENTATION: Moved installation instructions to separate page

* Added Fedora to contents table
* Added Issue/Bug Report section to README
* Some minor improvements

* DOCUMENTATION: Rename directory doc to docs

* Also move ISSUE_TEMPLATE.md to docs directory

* DOCUMENTATION: Use current repo's files

* This makes it consistent instead  of having few local and few pointing to
  espressif/arduino-esp32 by all linking to local files

* DOCUMENTATION: Fix hyperlink to issue/bug template in contents

* DOCUMENTATION: contents: supress platform specific installation instruction
2017-08-17 16:14:01 +03:00

2.2 KiB
Raw Blame History

Steps to install Arduino ESP32 support on Windows

Tested on 32 and 64 bit Windows 10 machines

  1. Download and install the latest Arduino IDE Windows Installer from arduino.cc

  2. Download and install Git from git-scm.com

  3. Start Git GUI and run through the following steps:

    • Select Clone Existing Repository

      Step 1

    • Select source and destination

      • Source Location: https://github.com/espressif/arduino-esp32.git

      • Target Directory: C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32

      • Change this to your Sketchbook Location if you have a different directory listed underneath the "Sketchbook location" in Arduino preferences.

      • Click Clone to start cloning the repository

        Step 2 Step 3

    • Open C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32/tools and double-click get.exe

      Step 4

    • When get.exe finishes, you should see the following files in the directory

      Step 5

  4. Plug your ESP32 board and wait for the drivers to install (or install manually any that might be required)

  5. Start Arduino IDE

  6. Select your board in Tools > Board menu

  7. Select the COM port that the board is attached to

  8. Compile and upload (You might need to hold the boot button while uploading)

    Arduino IDE Example

How to update to the latest code

  1. Start Git GUI and you should see the repository under Open Recent Repository. Click on it!

    Update Step 1

  2. From menu Remote select Fetch from > origin

    Update Step 2

  3. Wait for git to pull any changes and close Git GUI

  4. Open C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32/tools and double-click get.exe

    Step 4