esp-idf/components/bt/controller/esp32c6/Kconfig.in

menu "HCI Config"
    choice BT_LE_HCI_INTERFACE
        prompt "HCI mode"
        default BT_LE_HCI_INTERFACE_USE_RAM

        config BT_LE_HCI_INTERFACE_USE_RAM
            bool "VHCI"
            help
                Use RAM as HCI interface
        config BT_LE_HCI_INTERFACE_USE_UART
            bool "UART(H4)"
            help
                Use UART as HCI interface
    endchoice

    choice BT_LE_UART_HCI_MODE_CHOICE
        prompt "UART HCI mode"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default BT_LE_UART_HCI_NO_DMA_MODE
        help
            Specify UART HCI mode: DMA or No DMA

        config BT_LE_UART_HCI_DMA_MODE
            bool "UHCI(UART with DMA)(EXPERIMENTAL)"
            help
                UART HCI Mode with DMA functionality.

        config BT_LE_UART_HCI_NO_DMA_MODE
            bool "UART(NO DMA)"
            help
                UART HCI Mode without DMA functionality.
    endchoice

    config BT_LE_HCI_UART_PORT
        int "HCI UART port"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default 1
        help
            Set the port number of HCI UART

    config BT_LE_HCI_UART_FLOWCTRL
        bool "HCI uart Hardware Flow ctrl"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default n

    config BT_LE_HCI_UART_TX_PIN
        int "HCI uart Tx gpio"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default 19

    config BT_LE_HCI_UART_RX_PIN
        int "HCI uart Rx gpio"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default 10

    config BT_LE_HCI_UART_RTS_PIN
        int "HCI uart RTS gpio"
        depends on BT_LE_HCI_UART_FLOWCTRL
        default 4

    config BT_LE_HCI_UART_CTS_PIN
        int "HCI uart CTS gpio"
        depends on BT_LE_HCI_UART_FLOWCTRL
        default 5

    config BT_LE_HCI_UART_BAUD
        int "HCI uart baudrate"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default 921600
        help
            HCI uart baud rate 115200 ~ 1000000

    choice BT_LE_HCI_UART_PARITY
        prompt "select uart parity"
        depends on BT_LE_HCI_INTERFACE_USE_UART
        default BT_LE_HCI_UART_UART_PARITY_DISABLE

        config BT_LE_HCI_UART_UART_PARITY_DISABLE
            bool "PARITY_DISABLE"
            help
                UART_PARITY_DISABLE
        config BT_LE_HCI_UART_UART_PARITY_EVEN
            bool "PARITY_EVEN"
            help
                UART_PARITY_EVEN
        config BT_LE_HCI_UART_UART_PARITY_ODD
            bool "PARITY_ODD"
            help
                UART_PARITY_ODD
    endchoice

    config BT_LE_HCI_UART_RX_BUFFER_SIZE
        int "The size of rx ring buffer memory"
        depends on BT_LE_UART_HCI_NO_DMA_MODE
        default 512
        help
            The size of rx ring buffer memory

    config BT_LE_HCI_UART_TX_BUFFER_SIZE
        int "The size of tx ring buffer memory"
        depends on BT_LE_UART_HCI_NO_DMA_MODE
        default 256
        help
            The size of tx ring buffer memory

    config BT_LE_HCI_TRANS_TASK_STACK_SIZE
        int "HCI transport task stack size"
        depends on !BT_LE_HCI_INTERFACE_USE_RAM
        default 2048
        help
            This configures stack size of hci transport task

    config BT_LE_HCI_TRANS_RX_MEM_NUM
        int "The amount of rx memory received at the same time"
        depends on BT_LE_UART_HCI_DMA_MODE
        default 3
        help
            The amount of rx memory received at the same time

    config BT_LE_HCI_LLDESCS_POOL_NUM
        int "The amount of lldecs memory for driver dma mode"
        depends on BT_LE_UART_HCI_DMA_MODE
        default 20
        help
            The amount of lldecs memory for driver dma mode
endmenu

config BT_LE_CONTROLLER_NPL_OS_PORTING_SUPPORT
    bool
    default y
    help
        Enable NPL porting for controller.


menuconfig BT_LE_50_FEATURE_SUPPORT
    bool "Enable BLE 5 feature"
    depends on !BT_NIMBLE_ENABLED
    default y
    help
        Enable BLE 5 feature

config BT_LE_LL_CFG_FEAT_LE_2M_PHY
    bool "Enable 2M Phy"
    depends on BT_LE_50_FEATURE_SUPPORT
    default y
    help
        Enable 2M-PHY

config BT_LE_LL_CFG_FEAT_LE_CODED_PHY
    bool "Enable coded Phy"
    depends on BT_LE_50_FEATURE_SUPPORT
    default y
    help
        Enable coded-PHY

config BT_LE_EXT_ADV
    bool "Enable extended advertising"
    depends on BT_LE_50_FEATURE_SUPPORT
    default y
    help
        Enable this option to do extended advertising. Extended advertising
        will be supported from BLE 5.0 onwards.

if BT_LE_EXT_ADV
    config BT_LE_MAX_EXT_ADV_INSTANCES
        int "Maximum number of extended advertising instances."
        range 0 4
        default 1
        depends on BT_LE_EXT_ADV
        help
            Change this option to set maximum number of extended advertising
            instances. Minimum there is always one instance of
            advertising. Enter how many more advertising instances you
            want.
            Each extended advertising instance will take about 0.5k DRAM.

    config BT_LE_EXT_ADV_MAX_SIZE
        int "Maximum length of the advertising data."
        range 0 1650
        default 1650
        depends on BT_LE_EXT_ADV
        help
            Defines the length of the extended adv data. The value should not
            exceed 1650.

    config BT_LE_ENABLE_PERIODIC_ADV
        bool "Enable periodic advertisement."
        default y
        depends on BT_LE_EXT_ADV
        help
            Enable this option to start periodic advertisement.

    config BT_LE_PERIODIC_ADV_SYNC_TRANSFER
        bool "Enable Transfer Sync Events"
        depends on BT_LE_ENABLE_PERIODIC_ADV
        default y
        help
            This enables controller transfer periodic sync events to host

endif

config BT_LE_MAX_PERIODIC_SYNCS
    int "Maximum number of periodic advertising syncs"
    depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED

    range 0 8
    default 1 if BT_LE_ENABLE_PERIODIC_ADV
    default 0
    help
        Set this option to set the upper limit for number of periodic sync
        connections. This should be less than maximum connections allowed by
        controller.

config BT_LE_MAX_PERIODIC_ADVERTISER_LIST
    int "Maximum number of periodic advertiser list"
    depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
    range 1 5
    default 5
    help
        Set this option to set the upper limit for number of periodic advertiser list.

config BT_LE_POWER_CONTROL_ENABLED
    bool "Enable controller support for BLE Power Control"
    depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED && IDF_TARGET_ESP32C6
    default n
    help
        Set this option to enable the Power Control feature on controller

config BT_LE_CTE_FEATURE_ENABLED
    bool "Enable Bluetooth LE Direction Finding (AoA/AoD)"
    depends on BT_LE_50_FEATURE_SUPPORT && SOC_BLE_CTE_SUPPORTED
    default n
    help
        Enable this option to activate Bluetooth LE Direction Finding (AoA/AoD) feature.
        Note:
        This feature allows devices to determine the direction of a Bluetooth CTE signal,
        enabling Angle of Arrival (AoA) and Angle of Departure (AoD) functionality.

menu "Memory Settings"
    depends on !BT_NIMBLE_ENABLED

    config BT_LE_MSYS_1_BLOCK_COUNT
        int "MSYS_1 Block Count"
        default 12
        help
            MSYS is a system level mbuf registry. For prepare write & prepare
            responses MBUFs are allocated out of msys_1 pool. For NIMBLE_MESH
            enabled cases, this block count is increased by 8 than user defined
            count.

    config BT_LE_MSYS_1_BLOCK_SIZE
        int "MSYS_1 Block Size"
        default 256
        help
            Dynamic memory size of block 1

    config BT_LE_MSYS_2_BLOCK_COUNT
        int "MSYS_2 Block Count"
        default 24
        help
            Dynamic memory count

    config BT_LE_MSYS_2_BLOCK_SIZE
        int "MSYS_2 Block Size"
        default 320
        help
            Dynamic memory size of block 2

    config BT_LE_MSYS_BUF_FROM_HEAP
        bool "Get Msys Mbuf from heap"
        default y
        depends on BT_LE_MSYS_INIT_IN_CONTROLLER
        help
            This option sets the source of the shared msys mbuf memory between
            the Host and the Controller. Allocate the memory from the heap if
            this option is sets, from the mempool otherwise.

    config BT_LE_ACL_BUF_COUNT
        int "ACL Buffer count"
        default 10
        help
            The number of ACL data buffers.

    config BT_LE_ACL_BUF_SIZE
        int "ACL Buffer size"
        default 517
        help
            This is the maximum size of the data portion of HCI ACL data packets.
            It does not include the HCI data header (of 4 bytes)

    config BT_LE_HCI_EVT_BUF_SIZE
        int "HCI Event Buffer size"
        default 257 if BT_LE_EXT_ADV
        default 70
        help
            This is the size of each HCI event buffer in bytes. In case of
            extended advertising, packets can be fragmented. 257 bytes is the
            maximum size of a packet.

    config BT_LE_HCI_EVT_HI_BUF_COUNT
        int "High Priority HCI Event Buffer count"
        default 30
        help
            This is the high priority HCI events' buffer size. High-priority
            event buffers are for everything except advertising reports. If there
            are no free high-priority event buffers then host will try to allocate a
            low-priority buffer instead

    config BT_LE_HCI_EVT_LO_BUF_COUNT
        int "Low Priority HCI Event Buffer count"
        default 8
        help
            This is the low priority HCI events' buffer size. Low-priority event
            buffers are only used for advertising reports. If there are no free
            low-priority event buffers, then an incoming advertising report will
            get dropped
endmenu

config BT_LE_CONTROLLER_TASK_STACK_SIZE
    int "Controller task stack size"
    default 5120 if BLE_MESH
    default 4096
    help
        This configures stack size of NimBLE controller task

menu "Controller debug features"
    menuconfig BT_LE_CONTROLLER_LOG_ENABLED
        bool "Controller log enable"
        default n
        help
            Enable controller log

    config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
        bool "enable controller log module"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default y
        help
            Enable controller log module

    config BT_LE_CONTROLLER_LOG_HCI_ENABLED
        bool "enable HCI log module"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default y
        help
            Enable hci log module

    config BT_LE_CONTROLLER_LOG_DUMP_ONLY
        bool "Controller log dump mode only"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default y
        help
            Only operate in dump mode

    config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
        bool "Output ble controller logs to SPI bus (Experimental)"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
        select BT_BLE_LOG_SPI_OUT_ENABLED
        default n
        help
            Output ble controller logs to SPI bus

    config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
        bool "Store ble controller logs to flash(Experimental)"
        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default n
        help
            Store ble controller logs to flash memory.

    config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
        int "size of ble controller log partition(Multiples of 4K)"
        depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
        default 65536
        help
            The size of ble controller log partition shall be a multiples of 4K.
            The name of log partition shall be "bt_ctrl_log".
            The partition type shall be ESP_PARTITION_TYPE_DATA.
            The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.

    config BT_LE_LOG_CTRL_BUF1_SIZE
        int "size of the first BLE controller LOG buffer"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default 4096
        help
            Configure the size of the first BLE controller LOG buffer.

    config BT_LE_LOG_CTRL_BUF2_SIZE
        int "size of the second BLE controller LOG buffer"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default 1024
        help
            Configure the size of the second BLE controller LOG buffer.

    config BT_LE_LOG_HCI_BUF_SIZE
        int "size of the BLE HCI LOG buffer"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default 4096
        help
            Configure the size of the BLE HCI LOG buffer.

    config BT_LE_CONTROLLER_LOG_WRAP_PANIC_HANDLER_ENABLE
        bool "Enable wrap panic handler"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default n
        help
            Wrap esp_panic_handler to get controller logs when PC pointer exception crashes.

    config BT_LE_CONTROLLER_LOG_TASK_WDT_USER_HANDLER_ENABLE
        bool "Enable esp_task_wdt_isr_user_handler implementation"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        default n
        help
            Implement esp_task_wdt_isr_user_handler to get controller logs when task wdt issue is triggered.

    config BT_LE_CONTROLLER_LOG_OUTPUT_LEVEL
        int "The output level of controller log"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        range 0 5
        default 1
        help
            The output level of controller log.

    config BT_LE_CONTROLLER_LOG_MOD_OUTPUT_SWITCH
        hex "The switch of module log output"
        depends on BT_LE_CONTROLLER_LOG_ENABLED
        range 0 0xFFFFFFFF
        default 0xFFFFFFFF
        help
            The switch of module log output, this is an unsigned 32-bit hexadecimal value.

    config BT_LE_ERROR_SIM_ENABLED
        bool "Enable controller features for internal testing"
        default n

    config BT_LE_ASSERT_WHEN_ABNORMAL_DISCONN_ENABLED
        bool "When ACL disconnects abnormally, assertion processing is performed(Experimental)"
        default n

    config BT_LE_DEBUG_REMAIN_SCENE_ENABLED
        bool "Remain scene with GDB to capture relevant status info(Experimental)"
        default n
        help
            Retain scene with GDB to capture info, requires disabling WDT (CONFIG_ESP_INT_WDT, CONFIG_ESP_TASK_WDT_EN).

    config BT_LE_PTR_CHECK_ENABLED
        bool "Enable boundary check for internal memory"
        default n

    config BT_LE_MEM_CHECK_ENABLED
        bool "Enable memory allocation check"
        default n
        help
            Used in internal tests only. Enable the memory allocation check.
endmenu

config BT_LE_LL_RESOLV_LIST_SIZE
    int "BLE LL Resolving list size"
    range 1 5
    default 4
    help
        Configure the size of resolving list used in link layer.

menuconfig BT_LE_SECURITY_ENABLE
    bool "Enable BLE SM feature"
    depends on !BT_NIMBLE_ENABLED
    default y
    help
        Enable BLE sm feature

config BT_LE_SM_LEGACY
    bool "Security manager legacy pairing"
    depends on BT_LE_SECURITY_ENABLE
    default y
    help
        Enable security manager legacy pairing

config BT_LE_SM_SC
    bool "Security manager secure connections (4.2)"
    depends on BT_LE_SECURITY_ENABLE
    default y
    help
        Enable security manager secure connections

config BT_LE_SM_SC_DEBUG_KEYS
    bool "Use predefined public-private key pair"
    default n
    depends on BT_LE_SECURITY_ENABLE && BT_LE_SM_SC
    help
        If this option is enabled, SM uses predefined DH key pair as described
        in Core Specification, Vol. 3, Part H, 2.3.5.6.1. This allows to
        decrypt air traffic easily and thus should only be used for debugging.

config BT_LE_LL_CFG_FEAT_LE_ENCRYPTION
    bool "Enable LE encryption"
    depends on BT_LE_SECURITY_ENABLE
    default y
    help
        Enable encryption connection

config BT_LE_CRYPTO_STACK_MBEDTLS
    bool "Override TinyCrypt with mbedTLS for crypto computations"
    default y
    depends on !BT_NIMBLE_ENABLED
    select MBEDTLS_CMAC_C
    help
        Enable this option to choose mbedTLS instead of TinyCrypt for crypto
        computations.

config BT_LE_WHITELIST_SIZE
    int "BLE white list size"
    range 1 31
    default 12
    depends on !BT_NIMBLE_ENABLED

    help
        BLE list size

config BT_LE_LL_DUP_SCAN_LIST_COUNT
    int "BLE duplicate scan list count"
    range 5 100
    default 20
    help
        config the max count of duplicate scan list

config BT_LE_LL_SCA
    int "BLE Sleep clock accuracy"
    range 0 500
    default 60
    help
        Sleep clock accuracy of our device (in ppm)

config BT_LE_LL_PEER_SCA_SET_ENABLE
    bool "Enable to set constant peer SCA"
    default n
    help
        Enable setting of constant peer SCA, use this if peer device has SCA larger than 500 PPM.
        Enable this option, the controller will always use BT_LE_LL_PEER_SCA as the peer SCA value
        to calculate the window widening instead of the value received from peer device.


config BT_LE_LL_PEER_SCA
    int "Constant peer sleep clock accuracy value"
    range 0 10000
    depends on BT_LE_LL_PEER_SCA_SET_ENABLE
    default 0
    help
        Set the sleep clock accuracy of peer device

config BT_LE_MAX_CONNECTIONS
    int "Maximum number of concurrent connections"
    depends on !BT_NIMBLE_ENABLED
    range 1 70
    default 3
    help
        Defines maximum number of concurrent BLE connections. For ESP32, user
        is expected to configure BTDM_CTRL_BLE_MAX_CONN from controller menu
        along with this option. Similarly for ESP32-C3 or ESP32-S3, user is expected to
        configure BT_CTRL_BLE_MAX_ACT from controller menu.
        Each connection will take about 1k DRAM.

choice BT_LE_COEX_PHY_CODED_TX_RX_TLIM
    prompt "Coexistence: limit on MAX Tx/Rx time for coded-PHY connection"
    default BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
    depends on ESP_COEX_SW_COEXIST_ENABLE
    help
        When using PHY-Coded in BLE connection, limitation on max tx/rx time can be applied to
        better avoid dramatic performance deterioration of Wi-Fi.

    config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
        bool "Force Enable"
        help
            Always enable the limitation on max tx/rx time for Coded-PHY connection

    config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
        bool "Force Disable"
        help
            Disable the limitation on max tx/rx time for Coded-PHY connection
endchoice

config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF
    int
    default 0 if !ESP_COEX_SW_COEXIST_ENABLE
    default 1 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
    default 0 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS

config BT_LE_SLEEP_ENABLE
    bool "Enable BLE sleep"
    default n
    help
        Enable BLE sleep

choice BT_LE_LP_CLK_SRC
    prompt "BLE low power clock source"
    default BT_LE_LP_CLK_SRC_MAIN_XTAL
    config BT_LE_LP_CLK_SRC_MAIN_XTAL
        bool "Use main XTAL as RTC clock source"
        help
            User main XTAL as RTC clock source.
            This option is recommended if external 32.768k XTAL is not available.
            Using the external 32.768 kHz XTAL will have lower current consumption
            in light sleep compared to using the main XTAL.

    config BT_LE_LP_CLK_SRC_DEFAULT
        bool "Use system RTC slow clock source"
        help
            Use the same slow clock source as system RTC
            Using any clock source other than external 32.768 kHz XTAL supports only
            legacy ADV and SCAN due to low clock accuracy.

endchoice

config BT_LE_USE_ESP_TIMER
    bool "Enable Esp Timer for Callout"
    depends on !BT_NIMBLE_ENABLED
    default y
    help
        Set this option to use Esp Timer which has higher priority timer
        instead of FreeRTOS timer
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
    bool "BLE adv report flow control supported"
    default y
    help
        The function is mainly used to enable flow control for advertising reports. When it is enabled,
        advertising reports will be discarded by the controller if the number of unprocessed advertising
        reports exceeds the size of BLE adv report flow control.

config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM
    int "BLE adv report flow control number"
    depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
    range 50 1000
    default 100
    help
        The number of unprocessed advertising report that bluetooth host can save.If you set
        `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a small value, this may cause adv packets lost.
        If you set `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a large value, bluetooth host may cache a
        lot of adv packets and this may cause system memory run out. For example, if you set
        it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
        `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` according to your system free memory and handle adv
        packets as fast as possible, otherwise it will cause adv packets lost.

config BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD
    int "BLE adv lost event threshold value"
    depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
    range 1 1000
    default 20
    help
        When adv report flow control is enabled, The ADV lost event will be generated when the number
        of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
        If you set `BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
        may cause adv packets lost more.

config BT_LE_SCAN_DUPL
    bool "BLE Scan Duplicate Options"
    default y
    help
        This select enables parameters setting of BLE scan duplicate.

choice BT_LE_SCAN_DUPL_TYPE
    prompt "Scan Duplicate Type"
    default BT_LE_SCAN_DUPL_TYPE_DEVICE
    depends on BT_LE_SCAN_DUPL
    help
        Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use
        advertiser address filtering. The adv packet of the same address is only allowed to be reported once.
        Another way is "Scan Duplicate By Device Address And Advertising Data". This way is to use advertising
        data and device address filtering. All different adv packets with the same address are allowed to be
        reported. The last way is "Scan Duplicate By Advertising Data". This way is to use advertising data
        filtering. All same advertising data only allow to be reported once even though they are from
        different devices.

    config BT_LE_SCAN_DUPL_TYPE_DEVICE
        bool "Scan Duplicate By Device Address"
        help
            This way is to use advertiser address filtering. The adv packet of the same address is only
            allowed to be reported once

    config BT_LE_SCAN_DUPL_TYPE_DATA
        bool "Scan Duplicate By Advertising Data"
        help
            This way is to use advertising data filtering. All same advertising data only allow to be reported
            once even though they are from different devices.

    config BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
        bool "Scan Duplicate By Device Address And Advertising Data"
        help
            This way is to use advertising data and device address filtering. All different adv packets with
            the same address are allowed to be reported.
endchoice

config BT_LE_SCAN_DUPL_TYPE
    int
    depends on BT_LE_SCAN_DUPL
    default 0 if BT_LE_SCAN_DUPL_TYPE_DEVICE
    default 1 if BT_LE_SCAN_DUPL_TYPE_DATA
    default 2 if BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
    default 0

config BT_LE_SCAN_DUPL_CACHE_REFRESH_PERIOD
    int "Duplicate scan list refresh period (seconds)"
    depends on BT_LE_SCAN_DUPL
    range 0 1000
    default 0
    help
        If the period value is non-zero, the controller will periodically clear the device information
        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
        Host in advertising report events.
        There are two scenarios where the ADV packet will be repeatedly reported:
        1. The duplicate scan cache is full, the controller will delete the oldest device information and
        add new device information.
        2. When the refresh period is up, the controller will clear all device information and start filtering
        again.

config BT_LE_MSYS_INIT_IN_CONTROLLER
    bool "Msys Mbuf Init in Controller"
    default y

config BT_LE_TX_CCA_ENABLED
    bool "Enable TX CCA feature"
    default n
    help
        Enable CCA feature to cancel sending the packet if the signal power is stronger than CCA threshold.

config BT_LE_CCA_RSSI_THRESH
    int "CCA RSSI threshold value"
    depends on BT_LE_TX_CCA_ENABLED
    range 20 100
    default 65
    help
        Power threshold of CCA in unit of -1 dBm.

choice BT_LE_DFT_TX_POWER_LEVEL_DBM
    prompt "BLE default Tx power level(dBm)"
    default BT_LE_DFT_TX_POWER_LEVEL_P9
    help
        Specify default Tx power level(dBm).
    config BT_LE_DFT_TX_POWER_LEVEL_N15
        bool "-15dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_N12
        bool "-12dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_N9
        bool "-9dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_N6
        bool "-6dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_N3
        bool "-3dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_N0
        bool "0dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P3
        bool "+3dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P6
        bool "+6dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P9
        bool "+9dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P12
        bool "+12dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P15
        bool "+15dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P18
        bool "+18dBm"
    config BT_LE_DFT_TX_POWER_LEVEL_P20
        bool "+20dBm"
endchoice

config BT_LE_DFT_TX_POWER_LEVEL_DBM_EFF
    int
    default -15 if BT_LE_DFT_TX_POWER_LEVEL_N15
    default -12 if BT_LE_DFT_TX_POWER_LEVEL_N12
    default -9 if BT_LE_DFT_TX_POWER_LEVEL_N9
    default -6 if BT_LE_DFT_TX_POWER_LEVEL_N6
    default -3 if BT_LE_DFT_TX_POWER_LEVEL_N3
    default 0 if BT_LE_DFT_TX_POWER_LEVEL_N0
    default 3 if BT_LE_DFT_TX_POWER_LEVEL_P3
    default 6 if BT_LE_DFT_TX_POWER_LEVEL_P6
    default 9 if BT_LE_DFT_TX_POWER_LEVEL_P9
    default 12 if BT_LE_DFT_TX_POWER_LEVEL_P12
    default 15 if BT_LE_DFT_TX_POWER_LEVEL_P15
    default 18 if BT_LE_DFT_TX_POWER_LEVEL_P18
    default 20 if BT_LE_DFT_TX_POWER_LEVEL_P20
    default 0

config BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS
    bool "Enable enhanced Access Address check in CONNECT_IND"
    default n
    help
        Enabling this option will add stricter verification of the Access Address in the CONNECT_IND PDU.
        This improves security by ensuring that only connection requests with valid Access Addresses are accepted.
        If disabled, only basic checks are applied, improving compatibility.

config BT_CTRL_RUN_IN_FLASH_ONLY
    bool "Reduce BLE IRAM usage (READ DOCS FIRST) (EXPERIMENTAL)"
    default n
    help
        Move most IRAM into flash. This will increase the usage of flash and reduce ble performance.
        Because the code is moved to the flash, the execution speed of the code is reduced.
        To have a small impact on performance, you need to enable flash suspend (SPI_FLASH_AUTO_SUSPEND).

menu "BLE disconnects when Instant Passed (0x28) occurs"
    config BT_LE_CTRL_LLCP_CONN_UPDATE
        bool "BLE ACL connection update procedure"
        default n
        help
            If this option is enabled, Controller will terminate the connection
            when Instant Passed (0x28) error occurs during connection update procedure.

    config BT_LE_CTRL_LLCP_CHAN_MAP_UPDATE
        bool "BLE ACL channel map update procedure"
        default n
        help
            If this option is enabled, Controller will terminate the connection
            when Instant Passed (0x28) error occurs in channel map update procedure.

    config BT_LE_CTRL_LLCP_PHY_UPDATE
        bool "BLE ACL PHY update procedure"
        default n
        help
            If this option is enabled, Controller will terminate the connection
            when Instant Passed (0x28) error occurs in PHY update procedure.
endmenu

config BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX
    int "The value of upperlimitmax during scan backoff procedure"
    range 1 256
    default 32
    help
        The value of upperlimitmax needs to be a power of 2.

config BT_LE_CTRL_CHAN_ASS_EN
    bool "Enable channel assessment(Experimental)"
    default n
    help
        If this option is enabled, The Controller will records the communication quality
        for each channel and then start a timer to check and update the channel map every 4 seconds.

config BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX
    bool "Enable aux packet when ext adv data length is zero(Experimental)"
    default y
    help
        When this option is enabled, auxiliary packets will be present in the events of
        'Non-Connectable and Non-Scannable' regardless of whether the advertising length is 0.
        If this option is not enabled, auxiliary packets will only be present when the advertising length is not 0.

config BT_LE_RXBUF_OPT_ENABLED
    bool "Enable rxbuf optimization feature"
    default y

config BT_LE_CTRL_FAST_CONN_DATA_TX_EN
    bool "Enable fast sending of connection data"
    default y
    help
        If this option is enabled, The Controller will continue to
        Send an empty PDU after sending valid connection data within an interval.

menu "Reserved Memory Config"
    config BT_LE_EXT_ADV_RESERVED_MEMORY_COUNT
        int "The value of reserved EXT ADV memory count at initialization"
        range 0 4
        default 2
        help
            This value sets the number the Controller will allocate for extended advertisement
            instances at initialization process. If more extended advertisement instances are
            enabled, those memory will be dynamically allocated.
            Using reduced amount of reserved memory will save heap size at the cost of extra
            time consumption at advertising start process and possible advertising start failure
            due to memory shortage.
            The actual reserved memory count will be the minimum value between the maximum
            extended advertisement instances and the BT_LE_EXT_ADV_RESERVED_MEMORY_COUNT.


    config BT_LE_CONN_RESERVED_MEMORY_COUNT
        int "The value of reserved CONN memory count at initialization"
        range 0 70
        default 2
        help
            This value sets the number the Controller will allocate for connection instances
            at the initialization process. If more connection instances are enabled, those
            memory will be dynamically allocated.
            Using reduced amount of reserved memory will save heap size at the cost of extra
            time consumption at connection establishment process and possible connection
            establishment failure due to memory shortage.
            The actual reserved memory count will be the minimum value between the maximum
            connection instances and the BT_LE_CONN_RESERVED_MEMORY_COUNT.
endmenu