espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-07-29 18:27:20 +02:00
Code Issues Packages Projects Releases Wiki Activity

docs(jtag): fix esp32p4 usb jtag pins

Browse Source
This commit is contained in:
Anton Maklakov
2025-04-22 18:42:09 +07:00
parent 711836a6a0
commit 3dba09b93f
3 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst
View File

@ -8,8 +8,8 @@ Configure {IDF_TARGET_NAME} Built-in JTAG Interface
:link_to_translation:`zh_CN:[中文]`
{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO25"}
{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO24"}
{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24"}
{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25"}
{IDF_TARGET_NAME} has built-in JTAG circuitry and can be debugged without any additional chip. Only a USB cable connected to the D+/D- pins is necessary. For dev kits without an exposed USB Serial Jtag connector, a USB breakout cable can be used. The necessary connections are shown in the following section.

4
docs/zh_CN/api-guides/jtag-debugging/configure-builtin-jtag.rst
View File

@ -8,8 +8,8 @@
:link_to_translation:`en:[English]`
{IDF_TARGET_JTAG_PIN_Dneg:default="未更新!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO25"}
{IDF_TARGET_JTAG_PIN_Dpos:default="未更新!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO24"}
{IDF_TARGET_JTAG_PIN_Dneg:default="未更新!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26", esp32p4="GPIO24"}
{IDF_TARGET_JTAG_PIN_Dpos:default="未更新!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27", esp32p4="GPIO25"}
{IDF_TARGET_NAME} 内置了 JTAG 电路，无需额外的芯片即可进行调试。只需将 USB 线连接到 D+/D- 引脚即可。对于没有外露 USB 串行 JTAG 连接器的开发板，可以使用 USB 转接线。所需的连接方式将在下一节中介绍。

2
docs/zh_CN/get-started/establish-serial-connection.rst
View File

@ -142,7 +142,7 @@
{IDF_TARGET_NAME} 支持 USB 外设，无需外部 USB 至 UART 桥，即可烧录二进制文件。
{IDF_TARGET_USB_PIN_DM:default="尚未更新！", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26", esp32p4="GPIO24/26"}
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO24/26"}
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO25/27"}
{IDF_TARGET_NAME} 上的 USB 使用 **{IDF_TARGET_USB_PIN_DP}** 作为 **D+**， **{IDF_TARGET_USB_PIN_DM}** 作为 **D-**。