docs: Update CN translation for ecdsa.rst

docs/en/api-reference/peripherals/ecdsa.rst

@@ -68,9 +68,11 @@ Following code snippet uses :cpp:func:`esp_efuse_write_key` to set physical key
     -------------------------
 
     .. only:: esp32h2
+
         The ECDSA peripheral of the ESP32-H2 supports both ECDSA-P192 and ECDSA-P256 operations. However, starting with ESP32-H2 revision 1.2, only ECDSA-P256 operations are enabled by default. You can enable ECDSA-P192 operations using the following configuration options:
 
     .. only:: not esp32h2
+
         The ECDSA peripheral of {IDF_TARGET_NAME} supports both ECDSA-P192 and ECDSA-P256 operations, but only ECDSA-P256 operations are enabled by default. You can enable ECDSA-P192 operations through the following configuration options:
 
     - :ref:`CONFIG_ESP_ECDSA_ENABLE_P192_CURVE` enables support for ECDSA-P192 curve operations, allowing the device to perform ECDSA operations with both 192-bit and 256-bit curves. However, if ECDSA-P192 operations have already been permanently disabled during eFuse write protection, enabling this option can not re-enable ECDSA-P192 curve operations.

docs/zh_CN/api-reference/peripherals/ecdsa.rst

@@ -67,7 +67,13 @@ ECDSA 密钥可以通过 ``idf.py`` 脚本在外部编程。以下是关于编
     ECDSA 曲线配置
     -----------------
 
-    {IDF_TARGET_NAME} 的 ECDSA 外设支持 ECDSA-P192 和 ECDSA-P256 两种曲线操作，但默认仅启用 ECDSA-P256 操作。可以通过以下配置项启用 ECDSA-P192 操作：
+    .. only:: esp32h2
+
+        ESP32-H2 的 ECDSA 外设支持 ECDSA-P192 和 ECDSA-P256 两种曲线操作。但从 ESP32-H2 版本 1.2 开始，默认仅启用 ECDSA-P256 操作。可以通过以下配置项启用 ECDSA-P192 操作：
+
+    .. only:: not esp32h2
+
+        {IDF_TARGET_NAME} 的 ECDSA 外设支持 ECDSA-P192 和 ECDSA-P256 两种曲线操作，但默认仅启用 ECDSA-P256 操作。可以通过以下配置项启用 ECDSA-P192 操作：
 
     - :ref:`CONFIG_ESP_ECDSA_ENABLE_P192_CURVE` 启用对 ECDSA-P192 曲线操作的支持，使设备可以同时执行 192 位和 256 位的 ECDSA 曲线操作。但请注意，如果 eFuse 写保护期间已永久禁用 ECDSA-P192 操作，则启用该配置项也无法重新启用该功能。