espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-07-29 18:27:20 +02:00
Code Issues Packages Projects Releases Wiki Activity

change(esp_hw_support): wait pll calibration done in regdma link instead of wait fixed value

Browse Source
This commit is contained in:
wuzhenghui
2024-10-18 17:55:09 +08:00
parent c3044cad28
commit 87c4227e44
11 changed files with 106 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
components/esp_hw_support/lowpower/port/esp32c5/sleep_clock.c
View File

@ -6,10 +6,12 @@
#include "esp_private/sleep_clock.h"
#include "soc/pcr_reg.h"
#include "soc/pmu_reg.h"
#include "soc/rtc.h"
#include "modem/modem_syscon_reg.h"
#include "modem/modem_lpcon_reg.h"
#include "soc/i2c_ana_mst_reg.h"
#include "soc/regi2c_defs.h"
#include "soc/chip_revision.h"
#include "hal/efuse_hal.h"
@ -18,18 +20,30 @@ static const char *TAG = "sleep_clock";
esp_err_t sleep_clock_system_retention_init(void *arg)
{
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), PCR_AHB_FREQ_CONF_REG, 0, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(0) | ENTRY(1) },
/* Enable i2c master clock */
[0] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(0), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(0) },
/* Start BBPLL self-calibration */
[1] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(1), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
[2] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(2), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
/* Wait calibration done */
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(3), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE, I2C_MST_BBPLL_CAL_DONE, 1, 0), .owner = ENTRY(0) },
/* Stop BBPLL self-calibration */
[4] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(4), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
[5] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(5), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
/* Clock configuration retention */
[6] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(6), PMU_CLK_STATE0_REG, PMU_STABLE_XPD_BBPLL_STATE, PMU_STABLE_XPD_BBPLL_STATE_M, 1, 0), .owner = ENTRY(0)}, /* Wait PMU_WAIT_XTL_STABLE done */
[7] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(7), PCR_AHB_FREQ_CONF_REG, 0, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
[8] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(8), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(0) | ENTRY(1) },
#if CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
[2] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(2), DR_REG_PCR_BASE, DR_REG_PCR_BASE, 75, 0, 0, 0xffffffff, 0xffffffff, 0x200007f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
[9] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(9), DR_REG_PCR_BASE, DR_REG_PCR_BASE, 75, 0, 0, 0xffffffff, 0xffffffff, 0x200007f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
#endif
};
esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention");
const static sleep_retention_entries_config_t modem_ahb_config[] = {
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(3), PCR_AHB_FREQ_CONF_REG, 3, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(1) }, /* Set AHB bus frequency to 40 MHz under PMU MODEM state */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(1) },
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), PCR_AHB_FREQ_CONF_REG, 3, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(1) }, /* Set AHB bus frequency to 40 MHz under PMU MODEM state */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(1) },
};
err = sleep_retention_entries_create(modem_ahb_config, ARRAY_SIZE(modem_ahb_config), REGDMA_LINK_PRI_4, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention, 4 level priority");
@ -41,10 +55,10 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
* the PHY_I2C_MST_CMD_TYPE_BBPLL_CFG command from PHY i2c master
* command memory */
sleep_retention_entries_config_t bbpll_config[] = {
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(1) }, /* I2C MST enable */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(6), I2C_ANA_MST_I2C_BURST_CONF_REG, 0, 0xffffffff, 1, 0), .owner = ENTRY(1) },
[2] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(7), I2C_ANA_MST_I2C_BURST_STATUS_REG, I2C_ANA_MST_BURST_DONE, 0x1, 1, 0), .owner = ENTRY(1) },
[3] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(8), MODEM_LPCON_CLK_CONF_REG, 0, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(1) }, /* I2C MST disable */
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(6), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(1) }, /* I2C MST enable */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(7), I2C_ANA_MST_I2C_BURST_CONF_REG, 0, 0xffffffff, 1, 0), .owner = ENTRY(1) },
[2] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(8), I2C_ANA_MST_I2C_BURST_STATUS_REG, I2C_ANA_MST_BURST_DONE, 0x1, 1, 0), .owner = ENTRY(1) },
[3] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(9), MODEM_LPCON_CLK_CONF_REG, 0, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(1) }, /* I2C MST disable */
};
extern uint32_t phy_ana_i2c_master_burst_bbpll_config(void);
bbpll_config[1].config.write_wait.value = phy_ana_i2c_master_burst_bbpll_config();

18
components/esp_hw_support/lowpower/port/esp32c6/sleep_clock.c
View File

@ -6,6 +6,9 @@
#include "esp_private/sleep_clock.h"
#include "soc/pcr_reg.h"
#include "soc/pmu_reg.h"
#include "soc/regi2c_defs.h"
#include "modem/modem_lpcon_reg.h"
#include "modem/modem_syscon_reg.h"
static const char *TAG = "sleep_clock";
@ -15,8 +18,19 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
#define N_REGS_PCR() (((PCR_SRAM_POWER_CONF_REG - DR_REG_PCR_BASE) / 4) + 1)
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0x1), PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_REG, 1, 0, 0), .owner = ENTRY(0) | ENTRY(2) },
/* Enable i2c master clock */
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(0) },
/* Start BBPLL self-calibration */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), I2C_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(2), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
/* Wait calibration done */
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(3), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE, I2C_MST_BBPLL_CAL_DONE, 1, 0), .owner = ENTRY(0) },
/* Stop BBPLL self-calibration */
[4] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), I2C_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
[5] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
/* Clock configuration retention */
[6] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(6), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[7] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(7), PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_REG, 1, 0, 0), .owner = ENTRY(0) | ENTRY(2) },
};
esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);

26
components/esp_hw_support/lowpower/port/esp32c61/sleep_clock.c
View File

@ -6,6 +6,10 @@
#include "esp_private/sleep_clock.h"
#include "soc/pcr_reg.h"
#include "soc/pmu_reg.h"
#include "soc/i2c_ana_mst_reg.h"
#include "soc/regi2c_defs.h"
#include "modem/modem_lpcon_reg.h"
#include "modem/modem_syscon_reg.h"
static const char *TAG = "sleep_clock";
@ -13,10 +17,22 @@ static const char *TAG = "sleep_clock";
esp_err_t sleep_clock_system_retention_init(void *arg)
{
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), PCR_AHB_FREQ_CONF_REG, 0, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(0) | ENTRY(1) },
/* Enable i2c master clock */
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(0) },
/* Start BBPLL self-calibration */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(2), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
/* Wait calibration done */
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(3), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE, I2C_MST_BBPLL_CAL_DONE, 1, 0), .owner = ENTRY(0) },
/* Stop BBPLL self-calibration */
[4] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
[5] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
/* Clock configuration retention */
[6] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(6), PMU_CLK_STATE0_REG, PMU_STABLE_XPD_BBPLL_STATE, PMU_STABLE_XPD_BBPLL_STATE_M, 1, 0), .owner = ENTRY(0)}, /* Wait PMU_WAIT_XTL_STABLE done */
[7] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(7), PCR_AHB_FREQ_CONF_REG, 0, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
[8] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(8), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(0) | ENTRY(1) },
#if CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
[2] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(2), DR_REG_PCR_BASE, DR_REG_PCR_BASE, 63, 0, 0, 0xfd73ffff, 0xfdffffff, 0xe001, 0x0), .owner = ENTRY(0) | ENTRY(1) }
[9] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(9), DR_REG_PCR_BASE, DR_REG_PCR_BASE, 63, 0, 0, 0xfd73ffff, 0xfdffffff, 0xe001, 0x0), .owner = ENTRY(0) | ENTRY(1) }
#endif
};
@ -24,8 +40,8 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention");
const static sleep_retention_entries_config_t modem_ahb_config[] = {
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(3), PCR_AHB_FREQ_CONF_REG, 3, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(1) }, /* Set AHB bus frequency to 40 MHz under PMU MODEM state */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(1) },
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), PCR_AHB_FREQ_CONF_REG, 3, PCR_AHB_DIV_NUM, 1, 0), .owner = ENTRY(1) }, /* Set AHB bus frequency to 40 MHz under PMU MODEM state */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), PCR_BUS_CLK_UPDATE_REG, 1, PCR_BUS_CLOCK_UPDATE, 1, 0), .owner = ENTRY(1) },
};
err = sleep_retention_entries_create(modem_ahb_config, ARRAY_SIZE(modem_ahb_config), REGDMA_LINK_PRI_4, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention, 4 level priority");

22
components/esp_hw_support/lowpower/port/esp32h2/sleep_clock.c
View File

@ -5,7 +5,10 @@
*/
#include "esp_private/sleep_clock.h"
#include "soc/i2c_ana_mst_reg.h"
#include "soc/regi2c_defs.h"
#include "soc/pcr_reg.h"
#include "soc/regi2c_defs.h"
#include "modem/modem_syscon_reg.h"
#include "modem/modem_lpcon_reg.h"
@ -17,10 +20,21 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
#define N_REGS_PCR() (((PCR_PWDET_SAR_CLK_CONF_REG - DR_REG_PCR_BASE) / 4) + 1)
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0x1), PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_REG, 1, 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0x2), PCR_BUS_CLK_UPDATE_REG, PCR_BUS_CLOCK_UPDATE, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(0x3), PCR_BUS_CLK_UPDATE_REG, 0x0, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
/* Enable i2c master clock */
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(0) },
/* Start BBPLL self-calibration */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), I2C_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(2), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
/* Wait calibration done */
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(3), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE, I2C_MST_BBPLL_CAL_DONE, 1, 0), .owner = ENTRY(0) },
/* Stop BBPLL self-calibration */
[4] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(4), I2C_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
[5] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
/* Clock configuration retention */
[6] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(6), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[7] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(7), PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_REG, 1, 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[8] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(8), PCR_BUS_CLK_UPDATE_REG, PCR_BUS_CLOCK_UPDATE, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
[9] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(9), PCR_BUS_CLK_UPDATE_REG, 0x0, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
};
esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);

22
components/esp_hw_support/lowpower/port/esp32p4/sleep_clock.c
View File

@ -6,6 +6,9 @@
#include "esp_private/sleep_clock.h"
#include "soc/hp_sys_clkrst_reg.h"
#include "soc/pmu_reg.h"
#include "soc/lpperi_reg.h"
#include "pmu_bit_defs.h"
static const char *TAG = "sleep_clock";
@ -14,11 +17,20 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
#define N_REGS_PCR() (((HP_SYS_CLKRST_HPCORE_WDT_RESET_SOURCE0_REG - DR_REG_HP_SYS_CLKRST_BASE) / 4) + 1)
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0x0), DR_REG_HP_SYS_CLKRST_BASE, DR_REG_HP_SYS_CLKRST_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) }, /* pcr */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0x01), HP_SYS_CLKRST_ROOT_CLK_CTRL0_REG, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[2] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(0x02), HP_SYS_CLKRST_ROOT_CLK_CTRL0_REG, 0x0, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[3] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0x03), HP_SYS_CLKRST_PERI_CLK_CTRL02_REG, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[4] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(0x04), HP_SYS_CLKRST_PERI_CLK_CTRL02_REG, 0x0, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE_M, 1, 0), .owner = ENTRY(0) },
/* Enable i2c master clock */
[0] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0), LPPERI_CLK_EN_REG, LPPERI_CK_EN_LP_I2CMST, LPPERI_CK_EN_LP_I2CMST_M, 1, 1), .owner = ENTRY(0) },
/* Start SYSPLL self-calibration */
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(1), HP_SYS_CLKRST_ANA_PLL_CTRL0_REG, 0, HP_SYS_CLKRST_REG_SYS_PLL_CAL_STOP_M, 1, 1), .owner = ENTRY(0) },
/* Wait calibration done */
[2] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(2), HP_SYS_CLKRST_ANA_PLL_CTRL0_REG, HP_SYS_CLKRST_REG_SYS_PLL_CAL_END, HP_SYS_CLKRST_REG_SYS_PLL_CAL_END_M, 1, 0), .owner = ENTRY(0) },
/* Stop SYSPLL self-calibration */
[3] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(3), HP_SYS_CLKRST_ANA_PLL_CTRL0_REG, HP_SYS_CLKRST_REG_SYS_PLL_CAL_STOP, HP_SYS_CLKRST_REG_SYS_PLL_CAL_STOP_M, 1, 0), .owner = ENTRY(0) },
/* Clock configuration retention */
[4] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(4), DR_REG_HP_SYS_CLKRST_BASE, DR_REG_HP_SYS_CLKRST_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) }, /* pcr */
[5] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(5), HP_SYS_CLKRST_ROOT_CLK_CTRL0_REG, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[6] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(6), HP_SYS_CLKRST_ROOT_CLK_CTRL0_REG, 0x0, HP_SYS_CLKRST_REG_SOC_CLK_DIV_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[7] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(7), HP_SYS_CLKRST_PERI_CLK_CTRL02_REG, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE_M, 1, 0), .owner = ENTRY(0) },
[8] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(8), HP_SYS_CLKRST_PERI_CLK_CTRL02_REG, 0x0, HP_SYS_CLKRST_REG_SDIO_LS_CLK_EDGE_CFG_UPDATE_M, 1, 0), .owner = ENTRY(0) },
};
esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);

2
components/esp_hw_support/port/esp32c5/private_include/pmu_param.h
View File

@ -485,7 +485,7 @@ typedef struct pmu_sleep_machine_constant {
.regdma_rf_on_work_time_us = 60, \
.regdma_rf_off_work_time_us = 25, \
.xtal_wait_stable_time_us = 250, \
.pll_wait_stable_time_us = 1 \
.pll_wait_stable_time_us = 50 \
} \
}

2
components/esp_hw_support/port/esp32c6/private_include/pmu_param.h
View File

@ -474,7 +474,7 @@ typedef struct pmu_sleep_machine_constant {
.regdma_rf_on_work_time_us = 70, \
.regdma_rf_off_work_time_us = 23, \
.xtal_wait_stable_time_us = 250, \
.pll_wait_stable_time_us = 1 \
.pll_wait_stable_time_us = 50 \
} \
}

2
components/esp_hw_support/port/esp32c61/private_include/pmu_param.h
View File

@ -483,7 +483,7 @@ typedef struct pmu_sleep_machine_constant {
.regdma_rf_on_work_time_us = 138, \
.regdma_rf_off_work_time_us = 28, \
.xtal_wait_stable_time_us = 250, \
.pll_wait_stable_time_us = 1 \
.pll_wait_stable_time_us = 50 \
} \
}

2
components/esp_hw_support/port/esp32h2/private_include/pmu_param.h
View File

@ -447,7 +447,7 @@ typedef struct pmu_sleep_machine_constant {
.regdma_s2a_work_time_us = PMU_REGDMA_S2A_WORK_TIME_PD_TOP_US, \
.regdma_a2s_work_time_us = 0, \
.xtal_wait_stable_time_us = 250, \
.pll_wait_stable_time_us = 1 \
.pll_wait_stable_time_us = 50 \
} \
}

6
components/esp_hw_support/port/esp32p4/private_include/pmu_bit_defs.h
View File

@ -31,6 +31,12 @@ extern "C" {
#define PMU_LP_TIMER1_WAKEUP_EN BIT(18)
#define PMU_LP_I2S_WAKEUP_EN BIT(19)
// BIT order in PLL control registers in PMU
#define PMU_CPLL_CTRL BIT(0)
#define PMU_SPLL_CTRL BIT(1)
#define PMU_APLL_CTRL BIT(2)
#define PMU_SDIOPLL_CTRL BIT(3)
#ifdef __cplusplus
}
#endif

2
components/esp_hw_support/port/esp32p4/private_include/pmu_param.h
View File

@ -508,7 +508,7 @@ typedef struct pmu_sleep_machine_constant {
.regdma_rf_on_work_time_us = 70, \
.regdma_rf_off_work_time_us = 23, \
.xtal_wait_stable_time_us = 250, \
.pll_wait_stable_time_us = 1 \
.pll_wait_stable_time_us = 50 \
} \
}