mirror of
https://github.com/espressif/esp-idf.git
synced 2025-11-03 16:41:44 +01:00
78 lines
3.1 KiB
Markdown
78 lines
3.1 KiB
Markdown
# ESP-MQTT SSL Sample application (mutual authentication)
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example connects to the broker test.mosquitto.org using ssl transport with client certificate and as a demonstration subscribes/unsubscribes and send a message on certain topic.
|
|
|
|
It uses ESP-MQTT library which implements mqtt client to connect to mqtt broker.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet.
|
|
|
|
### Configure the project
|
|
|
|
* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
* When using Make build system, set `Default serial port` under `Serial flasher config`.
|
|
|
|
* Generate your client keys and certificate
|
|
|
|
Navigate to the main directory
|
|
|
|
```
|
|
cd main
|
|
```
|
|
|
|
Generate a client key and a CSR. When you are generating the CSR, do not use the default values. At a minimum, the CSR must include the Country, Organisation and Common Name fields.
|
|
|
|
```
|
|
openssl genrsa -out client.key
|
|
openssl req -out client.csr -key client.key -new
|
|
```
|
|
|
|
Paste the generated CSR in the [Mosquitto test certificate signer](https://test.mosquitto.org/ssl/index.php), click Submit and copy the downloaded `client.crt` in the `main` directory.
|
|
|
|
Please note, that the supplied files `client.crt` and `client.key` in the `main` directory are only placeholders for your client certificate and key (i.e. the example "as is" would compile but would not connect to the broker)
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
make -j4 flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (3714) event: sta ip: 192.168.0.139, mask: 255.255.255.0, gw: 192.168.0.2
|
|
I (3714) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
I (3964) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
|
|
I (4164) MQTTS_EXAMPLE: MQTT_EVENT_CONNECTED
|
|
I (4174) MQTTS_EXAMPLE: sent publish successful, msg_id=41464
|
|
I (4174) MQTTS_EXAMPLE: sent subscribe successful, msg_id=17886
|
|
I (4174) MQTTS_EXAMPLE: sent subscribe successful, msg_id=42970
|
|
I (4184) MQTTS_EXAMPLE: sent unsubscribe successful, msg_id=50241
|
|
I (4314) MQTTS_EXAMPLE: MQTT_EVENT_PUBLISHED, msg_id=41464
|
|
I (4484) MQTTS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=17886
|
|
I (4484) MQTTS_EXAMPLE: sent publish successful, msg_id=0
|
|
I (4684) MQTTS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=42970
|
|
I (4684) MQTTS_EXAMPLE: sent publish successful, msg_id=0
|
|
I (4884) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
|
|
I (4884) MQTTS_EXAMPLE: MQTT_EVENT_DATA
|
|
TOPIC=/topic/qos0
|
|
DATA=data
|
|
I (5194) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
|
|
I (5194) MQTTS_EXAMPLE: MQTT_EVENT_DATA
|
|
TOPIC=/topic/qos0
|
|
DATA=data
|
|
```
|
|
|