feedc0de/NeoPixelBus
1
0
Fork 0
forked from Makuna/NeoPixelBus
Code Pull Requests Activity

work around for first bit glitching

Browse Source 
forcing the pin low seems to fix the first bit having glitches in width.
This commit is contained in:
Makuna
2015-05-02 15:23:57 -07:00
parent 880552a4d9
commit d2c4b417a5
1 changed files with 25 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
NeoPixelBus.cpp
View File

@@ -76,16 +76,16 @@ void NeoPixelBus::Begin(void)
#if defined(ESP8266)
#define CYCLES_800_T0H (F_CPU / 2500000 - 2) // 0.4us
#define CYCLES_800_T1H (F_CPU / 1250000 - 2) // 0.8us
#define CYCLES_800 (F_CPU / 800000 - 2) // 1.25us per bit
#define CYCLES_400_T0H (F_CPU / 2000000 - 2)
#define CYCLES_400_T1H (F_CPU / 833333 - 2)
#define CYCLES_400 (F_CPU / 400000 - 2)
#define CYCLES_800_T0H (F_CPU / 2500000 - 4) // 0.4us
#define CYCLES_800_T1H (F_CPU / 1250000 - 4) // 0.8us
#define CYCLES_800 (F_CPU / 800000 - 4) // 1.25us per bit
#define CYCLES_400_T0H (F_CPU / 2000000 - 4)
#define CYCLES_400_T1H (F_CPU / 833333 - 4)
#define CYCLES_400 (F_CPU / 400000 - 4)
#define RSR_CCOUNT(r) __asm__ __volatile__("rsr %0,234":"=a" (r))
static inline ICACHE_FLASH_ATTR uint32_t get_ccount(void)
static inline uint32_t get_ccount(void)
{
uint32_t ccount;
RSR_CCOUNT(ccount);
@@ -93,33 +93,40 @@ static inline ICACHE_FLASH_ATTR uint32_t get_ccount(void)
}
static inline void ICACHE_FLASH_ATTR send_pixels_800(uint8_t* pixels, uint8_t* end, uint8_t pin)
static inline void send_pixels_800(uint8_t* pixels, uint8_t* end, uint8_t pin)
{
const uint32_t pinRegister = _BV(pin);
uint32_t mask; // 32 bit work is optimized for the chip
uint32_t subpix; // 32 bit work is optimized for the chip
uint8_t mask;
uint8_t subpix;
uint32_t cyclesStart;
// do not remove, this cleans up the initial bit
// set so that it is more stable
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pinRegister);
cyclesStart = get_ccount() + CYCLES_800;
while (pixels < end)
{
subpix = *pixels++;
for (mask = 0x80; mask; mask >>= 1)
{
uint32_t nextBit = (subpix & mask);
// do the check here while we are waiting on time to pass
bool nextBit = (subpix & mask);
uint32_t cyclesNext = cyclesStart;
// after we have done as much work as needed for this next bit
// now wait for the HIGH
do
{
// cache and use this count so we don't incur another
// instruction before we turn the bit high
cyclesStart = get_ccount();
}
while ((cyclesStart - cyclesNext) < CYCLES_800);
// set high
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pinRegister);
// wait for the LOW
if (nextBit)
{
@@ -130,6 +137,7 @@ static inline void ICACHE_FLASH_ATTR send_pixels_800(uint8_t* pixels, uint8_t* e
while ((get_ccount() - cyclesStart) < CYCLES_800_T0H);
}
// set low
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pinRegister);
}
}
@@ -199,7 +207,10 @@ void NeoPixelBus::Show(void)
// subsequent round of data until the latch time has elapsed. This
// allows the mainline code to start generating the next frame of data
// rather than stalling for the latch.
while ((micros() - _endTime) < 50L);
while ((micros() - _endTime) < 50L)
{
delayMicroseconds(1);
}
// _endTime is a private member (rather than global var) so that mutliple
// instances on different pins can be quickly issued in succession (each
// instance doesn't delay the next).