Add ESP32-S2 support

This commit is contained in:
dracir
2022-04-20 13:52:15 +02:00
parent db15796b5d
commit 8dff74503f

22
Kconfig
View File

@@ -153,6 +153,7 @@ menu "TFT_eSPI"
config TFT_PARALLEL_8_BIT
bool "Enable 8-bit parallel mode (otherwise SPI is assumed)"
default "n"
depends on IDF_TARGET_ESP32
help
Use 8-bit parallel bus to send data to the LCD. If not set SPI will be used.
@@ -214,7 +215,8 @@ menu "TFT_eSPI"
config TFT_MISO
int "TFT MISO pin"
default -1
range -1 32
range -1 32 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
help
Master In Slave Out pin.
Can be labelled as SDO in some displays
@@ -222,7 +224,8 @@ menu "TFT_eSPI"
config TFT_MOSI
int "TFT MOSI pin"
default -1
range -1 32
range -1 32 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
help
Master Out Slave In pin.
Can be labelled as SDA or SDI in some displays
@@ -230,7 +233,8 @@ menu "TFT_eSPI"
config TFT_SCLK
int "TFT Clock pin"
default -1
range -1 32
range -1 32 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
help
Labelled in some displays as WR
@@ -266,7 +270,8 @@ menu "TFT_eSPI"
config TFT_CS
int "TFT Chip Select pin"
default -1
range -1 33
range -1 33 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
config TFT_DC
int "TFT Data/Command pin"
@@ -278,7 +283,8 @@ menu "TFT_eSPI"
config TFT_RST
int "TFT Reset pin"
default -1
range -1 33
range -1 33 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
config ENABLE_BL
bool "Enable backlight control"
@@ -288,7 +294,8 @@ menu "TFT_eSPI"
config TFT_BL
int "TFT Backlight pin"
default -1
range -1 33
range -1 33 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
help
Pin for the backlight control signal
@@ -355,7 +362,8 @@ menu "TFT_eSPI"
config TOUCH_CS
int "Touch chip select pin"
default -1
range -1 33
range -1 33 if IDF_TARGET_ESP32
range -1 45 if IDF_TARGET_ESP32S2
config SPI_TOUCH_FREQUENCY
int "SPI frequency for XPT2046 chip (Hz)"