Prepare release 3.3.7

Improve measurements logging

examples/OneOpenAir/OneOpenAir.ino

@@ -143,6 +143,7 @@ static void updatePm(void);
 static void sendDataToServer(void);
 static void tempHumUpdate(void);
 static void co2Update(void);
+static void printMeasurements();
 static void mdnsInit(void);
 static void createMqttTask(void);
 static void initMqtt(void);
@@ -172,6 +173,7 @@ AgSchedule tvocSchedule(SENSOR_TVOC_UPDATE_INTERVAL, updateTvoc);
 AgSchedule watchdogFeedSchedule(60000, wdgFeedUpdate);
 AgSchedule checkForUpdateSchedule(FIRMWARE_CHECK_FOR_UPDATE_MS, checkForFirmwareUpdate);
 AgSchedule networkSignalCheckSchedule(10000, networkSignalCheck);
+AgSchedule printMeasurementsSchedule(6000, printMeasurements);
 
 void setup() {
   /** Serial for print debug message */
@@ -218,9 +220,6 @@ void setup() {
   boardInit();
   setMeasurementMaxPeriod();
 
-  // Comment below line to disable debug measurement readings
-  measurements.setDebug(true);
-
   bool connectToNetwork = true;
   if (ag->isOne()) { // Offline mode only available for indoor monitor
     /** Show message confirm offline mode, should me perform if LED bar button
@@ -364,6 +363,9 @@ void loop() {
     }
   }
 
+  /* Run measurement schedule */
+  printMeasurementsSchedule.run();
+
   /** factory reset handle */
   factoryConfigReset();
 
@@ -385,6 +387,10 @@ static void co2Update(void) {
   }
 }
 
+void printMeasurements() {
+  measurements.printCurrentAverage();
+}
+
 static void mdnsInit(void) {
   if (!MDNS.begin(localServer.getHostname().c_str())) {
     Serial.println("Init mDNS failed");

library.properties

@@ -1,5 +1,5 @@
 name=AirGradient Air Quality Sensor
-version=3.3.6
+version=3.3.7
 author=AirGradient <support@airgradient.com>
 maintainer=AirGradient <support@airgradient.com>
 sentence=ESP32-C3 / ESP8266 library for air quality monitor measuring PM, CO2, Temperature, TVOC and Humidity with OLED display.

src/AgValue.cpp

@@ -5,7 +5,7 @@
 #include <cmath>
 #include <sstream>
 
-#define json_prop_pmFirmware     "firmware"
+#define json_prop_pmFirmware "firmware"
 #define json_prop_pm01Ae "pm01"
 #define json_prop_pm25Ae "pm02"
 #define json_prop_pm10Ae "pm10"
@@ -33,7 +33,7 @@ Measurements::Measurements(Configuration &config) : config(config) {
 #ifndef ESP8266
   _resetReason = (int)ESP_RST_UNKNOWN;
 #endif
-  
+
   /* Set invalid value for each measurements as default value when initialized*/
   _temperature[0].update.avg = utils::getInvalidTemperature();
   _temperature[1].update.avg = utils::getInvalidTemperature();
@@ -51,7 +51,7 @@ Measurements::Measurements(Configuration &config) : config(config) {
   _pm_05_pc[1].update.avg = utils::getInvalidPmValue();
   _pm_5_pc[0].update.avg = utils::getInvalidPmValue();
   _pm_5_pc[1].update.avg = utils::getInvalidPmValue();
-  
+
   _pm_01[0].update.avg = utils::getInvalidPmValue();
   _pm_01_sp[0].update.avg = utils::getInvalidPmValue();
   _pm_01_pc[0].update.avg = utils::getInvalidPmValue();
@@ -76,6 +76,86 @@ Measurements::Measurements(Configuration &config) : config(config) {
 
 void Measurements::setAirGradient(AirGradient *ag) { this->ag = ag; }
 
+void Measurements::printCurrentAverage() {
+  Serial.println();
+  if (config.hasSensorS8) {
+    if (utils::isValidCO2(_co2.update.avg)) {
+      Serial.printf("CO2 = %.2f ppm\n", _co2.update.avg);
+    } else {
+      Serial.printf("CO2 = -\n");
+    }
+  }
+
+  if (config.hasSensorSHT) {
+    if (utils::isValidTemperature(_temperature[0].update.avg)) {
+      Serial.printf("Temperature = %.2f C\n", _temperature[0].update.avg);
+    } else {
+      Serial.printf("Temperature = -\n");
+    }
+    if (utils::isValidHumidity(_humidity[0].update.avg)) {
+      Serial.printf("Relative Humidity = %.2f\n", _humidity[0].update.avg);
+    } else {
+      Serial.printf("Relative Humidity = -\n");
+    }
+  }
+
+  if (config.hasSensorSGP) {
+    if (utils::isValidVOC(_tvoc.update.avg)) {
+      Serial.printf("TVOC Index = %.1f\n", _tvoc.update.avg);
+    } else {
+      Serial.printf("TVOC Index = -\n");
+    }
+    if (utils::isValidVOC(_tvoc_raw.update.avg)) {
+      Serial.printf("TVOC Raw = %.1f\n", _tvoc_raw.update.avg);
+    } else {
+      Serial.printf("TVOC Raw = -\n");
+    }
+    if (utils::isValidNOx(_nox.update.avg)) {
+      Serial.printf("NOx Index = %.1f\n", _nox.update.avg);
+    } else {
+      Serial.printf("NOx Index = -\n");
+    }
+    if (utils::isValidNOx(_nox_raw.update.avg)) {
+      Serial.printf("NOx Raw = %.1f\n", _nox_raw.update.avg);
+    } else {
+      Serial.printf("NOx Raw = -\n");
+    }
+  }
+
+  if (config.hasSensorPMS1) {
+    printCurrentPMAverage(1);
+    if (!config.hasSensorSHT) {
+      if (utils::isValidTemperature(_temperature[0].update.avg)) {
+        Serial.printf("[1] Temperature = %.2f C\n", _temperature[0].update.avg);
+      } else {
+        Serial.printf("[1] Temperature = -\n");
+      }
+      if (utils::isValidHumidity(_humidity[0].update.avg)) {
+        Serial.printf("[1] Relative Humidity = %.2f\n", _humidity[0].update.avg);
+      } else {
+        Serial.printf("[1] Relative Humidity = -\n");
+      }
+    }
+  }
+  if (config.hasSensorPMS2) {
+    printCurrentPMAverage(2);
+    if (!config.hasSensorSHT) {
+      if (utils::isValidTemperature(_temperature[1].update.avg)) {
+        Serial.printf("[2] Temperature = %.2f C\n", _temperature[1].update.avg);
+      } else {
+        Serial.printf("[2] Temperature = -\n");
+      }
+      if (utils::isValidHumidity(_humidity[1].update.avg)) {
+        Serial.printf("[2] Relative Humidity = %.2f\n", _humidity[1].update.avg);
+      } else {
+        Serial.printf("[2] Relative Humidity = -\n");
+      }
+    }
+  }
+
+  Serial.println();
+}
+
 void Measurements::maxPeriod(MeasurementType type, int max) {
   switch (type) {
   case Temperature:
@@ -570,6 +650,77 @@ String Measurements::measurementTypeStr(MeasurementType type) {
   return str;
 }
 
+void Measurements::printCurrentPMAverage(int ch) {
+  int idx = ch - 1;
+
+  if (utils::isValidPm(_pm_01[idx].update.avg)) {
+    Serial.printf("[%d] Atmospheric PM 1.0 = %.2f ug/m3\n", ch, _pm_01[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Atmospheric PM 1.0 = -\n");
+  }
+  if (utils::isValidPm(_pm_25[idx].update.avg)) {
+    Serial.printf("[%d] Atmospheric PM 2.5 = %.2f ug/m3\n", ch, _pm_25[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Atmospheric PM 2.5 = -\n");
+  }
+  if (utils::isValidPm(_pm_10[idx].update.avg)) {
+    Serial.printf("[%d] Atmospheric PM 10 = %.2f ug/m3\n", ch, _pm_10[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Atmospheric PM 10 = -\n");
+  }
+  if (utils::isValidPm(_pm_01_sp[idx].update.avg)) {
+    Serial.printf("[%d] Standard Particle PM 1.0 = %.2f ug/m3\n", ch, _pm_01_sp[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Standard Particle PM 1.0 = -\n");
+  }
+  if (utils::isValidPm(_pm_25_sp[idx].update.avg)) {
+    Serial.printf("[%d] Standard Particle PM 2.5 = %.2f ug/m3\n", ch, _pm_25_sp[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Standard Particle PM 2.5 = -\n");
+  }
+  if (utils::isValidPm(_pm_10_sp[idx].update.avg)) {
+    Serial.printf("[%d] Standard Particle PM 10 = %.2f ug/m3\n", ch, _pm_10_sp[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Standard Particle PM 10 = -\n");
+  }
+  if (utils::isValidPm03Count(_pm_03_pc[idx].update.avg)) {
+    Serial.printf("[%d] Particle Count 0.3 = %.1f\n", ch, _pm_03_pc[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Particle Count 0.3 = -\n");
+  }
+  if (utils::isValidPm03Count(_pm_05_pc[idx].update.avg)) {
+    Serial.printf("[%d] Particle Count 0.5 = %.1f\n", ch, _pm_05_pc[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Particle Count 0.5 = -\n");
+  }
+  if (utils::isValidPm03Count(_pm_01_pc[idx].update.avg)) {
+    Serial.printf("[%d] Particle Count 1.0 = %.1f\n", ch, _pm_01_pc[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Particle Count 1.0 = -\n");
+  }
+  if (utils::isValidPm03Count(_pm_25_pc[idx].update.avg)) {
+    Serial.printf("[%d] Particle Count 2.5 = %.1f\n", ch, _pm_25_pc[idx].update.avg);
+  } else {
+    Serial.printf("[%d] Particle Count 2.5 = -\n");
+  }
+
+  if (_pm_5_pc[idx].listValues.empty() == false) {
+    if (utils::isValidPm03Count(_pm_5_pc[idx].update.avg)) {
+      Serial.printf("[%d] Particle Count 5.0 = %.1f\n", ch, _pm_5_pc[idx].update.avg);
+    } else {
+      Serial.printf("[%d] Particle Count 5.0 = -\n");
+    }
+  }
+
+  if (_pm_10_pc[idx].listValues.empty() == false) {
+    if (utils::isValidPm03Count(_pm_10_pc[idx].update.avg)) {
+      Serial.printf("[%d] Particle Count 10 = %.1f\n", ch, _pm_10_pc[idx].update.avg);
+    } else {
+      Serial.printf("[%d] Particle Count 10 = -\n");
+    }
+  }
+}
+
 void Measurements::validateChannel(int ch) {
   if (ch != 1 && ch != 2) {
     Serial.printf("ERROR! Channel %d is undefined. Only channel 1 or 2 is the optional value!", ch);

src/AgValue.h

@@ -88,6 +88,8 @@ public:
     PM10_PC, // Particle 10 count
   };
 
+  void printCurrentAverage();
+
   /**
    * @brief Set each MeasurementType maximum period length for moving average
    *
@@ -258,6 +260,8 @@ private:
    */
   void validateChannel(int ch);
 
+  void printCurrentPMAverage(int ch);
+
   JSONVar buildOutdoor(bool localServer, AgFirmwareMode fwMode);
   JSONVar buildIndoor(bool localServer);
   JSONVar buildPMS(int ch, bool allCh, bool withTempHum, bool compensate);

src/AirGradient.h

@@ -15,7 +15,7 @@
 #include "Main/utils.h"
 
 #ifndef GIT_VERSION
-#define GIT_VERSION "3.3.6-snap"
+#define GIT_VERSION "3.3.7-snap"
 #endif