feedc0de/esp-idf
1
0
Fork 0
forked from espressif/esp-idf
Code Pull Requests Activity

esp32: fix coex bug

Browse Source 
1. fix BLE connection missing in coex mode
    2. modify other parameters to make coex priority more reasonable
    3. fix modem sleep procedure trap cause Wifi disable RF when BT is
    working. Such cause that BR/EDR is difficult to be connected, BLE
    connection stability decrease and so on.
    4. modify BR/EDR coexist duration to imrove BR/EDR connect success
    ratio.
    5. Due to the hardware coexist bug, BLE scan interval/window should
    be less than 0x100(about 160ms). Therefore, it will cause BLE cannot
    scan any advertising packet while WiFi have higher priority
    behaviour(such like RX beacon, scan, TX/RX VO packets and etc.).
This commit is contained in:
Tian Hao
2018-06-24 16:38:05 +08:00
committed by Jack
parent b31e16039e
commit 3ad712ba86
4 changed files with 18 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
components/bt/bt.c
View File

@@ -915,7 +915,14 @@ esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)
esp_phy_load_cal_and_init(PHY_BT_MODULE);
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_NONE) {
//Just register to sleep module, make the modem sleep modules check BT sleep status when sleep enter.
//Thus, it will prevent WIFI from disabling RF when BT is not in sleep but is using RF.
esp_modem_sleep_register(MODEM_BLE_MODULE);
esp_modem_sleep_register(MODEM_CLASSIC_BT_MODULE);
esp_modem_sleep_exit(MODEM_BLE_MODULE);
esp_modem_sleep_exit(MODEM_CLASSIC_BT_MODULE);
} else if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
esp_modem_sleep_register(MODEM_BLE_MODULE);
esp_modem_sleep_register(MODEM_CLASSIC_BT_MODULE);
} else if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_EVED) {
@@ -933,7 +940,8 @@ esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)
ret = btdm_controller_enable(mode);
if (ret) {
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_NONE
|| btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
esp_modem_sleep_deregister(MODEM_BLE_MODULE);
esp_modem_sleep_deregister(MODEM_CLASSIC_BT_MODULE);
} else if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_EVED) {
@@ -973,7 +981,8 @@ esp_err_t esp_bt_controller_disable(void)
}
if (ret == ESP_BT_MODE_IDLE) {
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_NONE
|| btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_ORIG) {
esp_modem_sleep_deregister(MODEM_BLE_MODULE);
esp_modem_sleep_deregister(MODEM_CLASSIC_BT_MODULE);
} else if (btdm_controller_get_sleep_mode() == BTDM_MODEM_SLEEP_MODE_EVED) {

2
components/bt/lib

Submodule components/bt/lib updated: e0740ac07b...48b2459bcb

4
components/esp32/include/esp_phy_init.h
View File

@@ -202,6 +202,10 @@ esp_err_t esp_modem_sleep_exit(modem_sleep_module_t module);
/**
* @brief Register module to make it be able to require to enter/exit modem sleep
* Although the module has no sleep function, as long as the module use RF,
* it must call esp_modem_sleep_regsiter. Otherwise, other modules with sleep
* function will disable RF without checking the module which doesn't call
* esp_modem_sleep_regsiter.
*/
esp_err_t esp_modem_sleep_register(modem_sleep_module_t module);

2
components/esp32/lib

Submodule components/esp32/lib updated: 534a9b1410...0bfda8bbf6