Update_sdkdefaultconfig_BLE_only_flag ESP32C2

components/bt/controller/esp32h2/bt.c

@@ -568,7 +568,7 @@ void controller_sleep_deinit(void)
 }
 
 #if CONFIG_IDF_TARGET_ESP32H2_BETA_VERSION_2
-void periph_module_etm_active()
+void periph_module_etm_active(void)
 {
     /*This part for esp32h2 beta2*/
     REG_SET_BIT(SYSTEM_MODCLK_CONF_REG, SYSTEM_ETM_CLK_SEL | SYSTEM_ETM_CLK_ACTIVE ); //Active ETM clock

examples/bluetooth/bluedroid/ble/ble_ancs/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/ble_compatibility_test/sdkconfig.defaults

@@ -1,14 +1,4 @@
-# Override some defaults so BT stack is enabled
-# in this example
-
-#
-# BT config
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
 #
 CONFIG_BT_ENABLED=y
-
-#
-# ESP32-specific config
-#
-CONFIG_ESP32_ENABLE_STACK_BT=y
-# CONFIG_ESP32_ENABLE_STACK_NONE is not set
-CONFIG_MEMMAP_BT=y

examples/bluetooth/bluedroid/ble/ble_eddystone/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# and WiFi disabled by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/ble_hid_device_demo/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/ble_ibeacon/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# and WiFi disabled by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/ble_spp_client/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# and WiFi disabled by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/ble_spp_server/sdkconfig.defaults

@@ -1,16 +1,4 @@
-# Override some defaults so BT stack is enabled
-# in this example
-
-#
-# BT config
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
 #
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n
-#
-# ESP32-specific config
-#
-CONFIG_ESP32_ENABLE_STACK_BT=y
-# CONFIG_ESP32_ENABLE_STACK_NONE is not set
-CONFIG_MEMMAP_BT=y

examples/bluetooth/bluedroid/ble/ble_throughput/throughput_client/sdkconfig.defaults

@@ -1,22 +1,5 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
+CONFIG_GATTC_WRITE_THROUGHPUT=y
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n
-CONFIG_BTDM_CTRL_BLE_MAX_CONN=9
-CONFIG_GATTS_NOTIFY_THROUGHPUT=y
-CONFIG_CTRL_BTDM_MODEM_SLEEP=n
-CONFIG_BTDM_CTRL_PINNED_TO_CORE_1=y
-CONFIG_BTDM_CTRL_PINNED_TO_CORE=1
-#
-# Serial flasher config
-#
-CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B=y
-CONFIG_ESPTOOLPY_MONITOR_BAUD=921600
-#
-# ESP32-specific
-#
-CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
-CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600

examples/bluetooth/bluedroid/ble/ble_throughput/throughput_server/sdkconfig.defaults

@@ -1,22 +1,7 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
-CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n
-CONFIG_BTDM_CTRL_BLE_MAX_CONN=9
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
+CONFIG_EXAMPLE_SET_RAW_ADV_DATA=y
 CONFIG_EXAMPLE_GATTS_NOTIFY_THROUGHPUT=y
-CONFIG_CTRL_BTDM_MODEM_SLEEP=n
-CONFIG_BTDM_CTRL_PINNED_TO_CORE_1=y
-CONFIG_BTDM_CTRL_PINNED_TO_CORE=1
-#
-# Serial flasher config
-#
-CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B=y
-CONFIG_ESPTOOLPY_MONITOR_BAUD=921600
-#
-# ESP32-specific
-#
-CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
-CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600
+CONFIG_EXAMPLE_GATTC_WRITE_THROUGHPUT=y
+CONFIG_BT_ENABLED=y

examples/bluetooth/bluedroid/ble/gatt_client/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/gatt_security_client/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# and WiFi disabled by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/gatt_security_server/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/gatt_server/sdkconfig.defaults

@@ -1,6 +1,4 @@
-# Override some defaults so BT stack is enabled
-# by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n

examples/bluetooth/bluedroid/ble/gatt_server_service_table/sdkconfig.defaults

@@ -1,17 +1,4 @@
-# Override some defaults so BT stack is enabled
-# in this example
-
-#
-# BT config
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
 #
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n
-
-#
-# ESP32-specific config
-#
-CONFIG_ESP32_ENABLE_STACK_BT=y
-# CONFIG_ESP32_ENABLE_STACK_NONE is not set
-CONFIG_MEMMAP_BT=y

examples/bluetooth/bluedroid/ble/gattc_multi_connect/sdkconfig.defaults

@@ -1,7 +1,4 @@
-# Override some defaults so BT stack is enabled
-# and WiFi disabled by default in this example
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
-CONFIG_BTDM_CTRL_MODE_BTDM=n
-CONFIG_BTDM_CTRL_BLE_MAX_CONN=9