Merge branch 'feature/ver-4.2' into 'master'

global: bump version to 4.2

See merge request espressif/esp-idf!7335

.flake8

@@ -0,0 +1,165 @@
+[flake8]
+
+select =
+    # Full lists are given in order to suppress all errors from other plugins
+    # Full list of pyflakes error codes:
+    F401,           # module imported but unused
+    F402,           # import module from line N shadowed by loop variable
+    F403,           # 'from module import *' used; unable to detect undefined names
+    F404,           # future import(s) name after other statements
+    F405,           # name may be undefined, or defined from star imports: module
+    F406,           # 'from module import *' only allowed at module level
+    F407,           # an undefined __future__ feature name was imported
+    F601,           # dictionary key name repeated with different values
+    F602,           # dictionary key variable name repeated with different values
+    F621,           # too many expressions in an assignment with star-unpacking
+    F622,           # two or more starred expressions in an assignment (a, *b, *c = d)
+    F631,           # assertion test is a tuple, which are always True
+    F701,           # a break statement outside of a while or for loop
+    F702,           # a continue statement outside of a while or for loop
+    F703,           # a continue statement in a finally block in a loop
+    F704,           # a yield or yield from statement outside of a function
+    F705,           # a return statement with arguments inside a generator
+    F706,           # a return statement outside of a function/method
+    F707,           # an except: block as not the last exception handler
+    F721, F722,     #    doctest syntax error syntax error in forward type annotation
+    F811,           # redefinition of unused name from line N
+    F812,           # list comprehension redefines name from line N
+    F821,           # undefined name name
+    F822,           # undefined name name in __all__
+    F823,           # local variable name referenced before assignment
+    F831,           # duplicate argument name in function definition
+    F841,           # local variable name is assigned to but never used
+    F901,           # raise NotImplemented should be raise NotImplementedError
+
+    # Full list of pycodestyle violations:
+    E101,           # indentation contains mixed spaces and tabs
+    E111,           # indentation is not a multiple of four
+    E112,           # expected an indented block
+    E113,           # unexpected indentation
+    E114,           # indentation is not a multiple of four (comment)
+    E115,           # expected an indented block (comment)
+    E116,           # unexpected indentation (comment)
+    E121,           # continuation line under-indented for hanging indent
+    E122,           # continuation line missing indentation or outdented
+    E123,           # closing bracket does not match indentation of opening bracket's line
+    E124,           # closing bracket does not match visual indentation
+    E125,           # continuation line with same indent as next logical line
+    E126,           # continuation line over-indented for hanging indent
+    E127,           # continuation line over-indented for visual indent
+    E128,           # continuation line under-indented for visual indent
+    E129,           # visually indented line with same indent as next logical line
+    E131,           # continuation line unaligned for hanging indent
+    E133,           # closing bracket is missing indentation
+    E201,           # whitespace after '('
+    E202,           # whitespace before ')'
+    E203,           # whitespace before ':'
+    E211,           # whitespace before '('
+    E221,           # multiple spaces before operator
+    E222,           # multiple spaces after operator
+    E223,           # tab before operator
+    E224,           # tab after operator
+    E225,           # missing whitespace around operator
+    E226,           # missing whitespace around arithmetic operator
+    E227,           # missing whitespace around bitwise or shift operator
+    E228,           # missing whitespace around modulo operator
+    E231,           # missing whitespace after ',', ';', or ':'
+    E241,           # multiple spaces after ','
+    E242,           # tab after ','
+    E251,           # unexpected spaces around keyword / parameter equals
+    E261,           # at least two spaces before inline comment
+    E262,           # inline comment should start with '# '
+    E265,           # block comment should start with '# '
+    E266,           # too many leading '#' for block comment
+    E271,           # multiple spaces after keyword
+    E272,           # multiple spaces before keyword
+    E273,           # tab after keyword
+    E274,           # tab before keyword
+    E275,           # missing whitespace after keyword
+    E301,           # expected 1 blank line, found 0
+    E302,           # expected 2 blank lines, found 0
+    E303,           # too many blank lines
+    E304,           # blank lines found after function decorator
+    E305,           # expected 2 blank lines after end of function or class
+    E306,           # expected 1 blank line before a nested definition
+    E401,           # multiple imports on one line
+    E402,           # module level import not at top of file
+    E501,           # line too long (82 > 79 characters)
+    E502,           # the backslash is redundant between brackets
+    E701,           # multiple statements on one line (colon)
+    E702,           # multiple statements on one line (semicolon)
+    E703,           # statement ends with a semicolon
+    E704,           # multiple statements on one line (def)
+    E711,           # comparison to None should be 'if cond is None:'
+    E712,           # comparison to True should be 'if cond is True:' or 'if cond:'
+    E713,           # test for membership should be 'not in'
+    E714,           # test for object identity should be 'is not'
+    E721,           # do not compare types, use 'isinstance()'
+    E722,           # do not use bare except, specify exception instead
+    E731,           # do not assign a lambda expression, use a def
+    E741,           # do not use variables named 'l', 'O', or 'I'
+    E742,           # do not define classes named 'l', 'O', or 'I'
+    E743,           # do not define functions named 'l', 'O', or 'I'
+    E901,           # SyntaxError or IndentationError
+    E902,           # IOError
+    W191,           # indentation contains tabs
+    W291,           # trailing whitespace
+    W292,           # no newline at end of file
+    W293,           # blank line contains whitespace
+    W391,           # blank line at end of file
+    W503,           # line break before binary operator
+    W504,           # line break after binary operator
+    W505,           # doc line too long (82 > 79 characters)
+    W601,           # .has_key() is deprecated, use 'in'
+    W602,           # deprecated form of raising exception
+    W603,           # '<>' is deprecated, use '!='
+    W604,           # backticks are deprecated, use 'repr()'
+    W605,           # invalid escape sequence 'x'
+    W606,           # 'async' and 'await' are reserved keywords starting with Python 3.7
+
+    # Full list of flake8 violations
+    E999,           # failed to compile a file into an Abstract Syntax Tree for the plugins that require it
+
+    # Full list of mccabe violations
+    C901            # complexity value provided by the user
+
+ignore =
+    E221,           # multiple spaces before operator
+    E231,           # missing whitespace after ',', ';', or ':'
+    E241,           # multiple spaces after ','
+    W503,           # line break before binary operator
+    W504            # line break after binary operator
+
+max-line-length = 160
+
+show_source = True
+
+statistics = True
+
+exclude =
+    .git,
+    __pycache__,
+    # submodules
+        components/bootloader/subproject/components/micro-ecc/micro-ecc,
+        components/esptool_py/esptool,
+        components/expat/expat,
+        components/json/cJSON,
+        components/libsodium/libsodium,
+        components/mbedtls/mbedtls,
+        components/nghttp/nghttp2,
+        components/bt/host/nimble/nimble,
+        components/unity/unity,
+        examples/build_system/cmake/import_lib/main/lib/tinyxml2,
+    # other third-party libraries
+        tools/kconfig_new/kconfiglib.py,
+        tools/kconfig_new/menuconfig.py,
+    # autogenerated scripts
+        components/protocomm/python/constants_pb2.py,
+        components/protocomm/python/sec0_pb2.py,
+        components/protocomm/python/sec1_pb2.py,
+        components/protocomm/python/session_pb2.py,
+        components/wifi_provisioning/python/wifi_scan_pb2.py,
+        components/wifi_provisioning/python/wifi_config_pb2.py,
+        components/wifi_provisioning/python/wifi_constants_pb2.py,
+        components/esp_local_ctrl/python/esp_local_ctrl_pb2.py,
+        examples/provisioning/custom_config/components/custom_provisioning/python/custom_config_pb2.py,

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,92 @@
+---
+name: Bug report
+about: ESP-IDF crashes, produces incorrect output, or has incorrect behavior
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+----------------------------- Delete below -----------------------------
+
+**Reminder: If your issue is a general question, starts similar to "How do I..", or is related to 3rd party development kits/libs, please discuss this on our community forum at https://esp32.com instead.**
+
+INSTRUCTIONS
+============
+
+Before submitting a new issue, please follow the checklist and try to find the answer.
+
+- [ ] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
+- [ ] I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
+- [ ] I have searched the issue tracker for a similar issue and not found a similar issue.
+
+If the issue cannot be solved after the steps before, please follow these instructions so we can get the needed information to help you in a quick and effective fashion.
+
+1. Fill in all the fields under **Environment** marked with [ ] by picking the correct option for you in each case and deleting the others.
+2. Describe your problem.
+3. Include [debug logs from the "monitor" tool](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html#automatically-decoding-addresses), or [coredumps](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/core_dump.html).
+4. Providing as much information as possible under **Other items if possible** will help us locate and fix the problem.
+5. Use [Markdown](https://guides.github.com/features/mastering-markdown/) (see formatting buttons above) and the Preview tab to check what the issue will look like.
+6. Delete these instructions from the above to the below marker lines before submitting this issue.
+
+**IMPORTANT: If you do not follow these instructions and provide the necessary details, your issue may not be resolved.**
+
+----------------------------- Delete above -----------------------------
+
+## Environment
+
+- Development Kit:      [ESP32-Wrover-Kit|ESP32-DevKitC|ESP32-PICO-Kit|ESP32-LyraT|ESP32-LyraTD-MSC|none]
+- Kit version (for WroverKit/PicoKit/DevKitC): [v1|v2|v3|v4]
+- Module or chip used:  [ESP32-WROOM-32|ESP32-WROOM-32D|ESP32-WROOM-32U|ESP32-WROVER|ESP32-WROVER-I|ESP32-WROVER-B|ESP32-WROVER-IB|ESP32-SOLO-1|ESP32-PICO-D4|ESP32]
+- IDF version (run ``git describe --tags`` to find it):
+    // v3.2-dev-1148-g96cd3b75c
+- Build System:         [Make|CMake|idf.py]
+- Compiler version (run ``xtensa-esp32-elf-gcc --version`` to find it):
+    // 1.22.0-80-g6c4433a
+- Operating System:     [Windows|Linux|macOS]
+- (Windows only) environment type: [MSYS2 mingw32|ESP Command Prompt|Plain Command Prompt|PowerShell].
+- Using an IDE?: [No|Yes (please give details)]
+- Power Supply:         [USB|external 5V|external 3.3V|Battery]
+
+## Problem Description
+
+//Detailed problem description goes here.
+
+### Expected Behavior
+
+### Actual Behavior
+
+### Steps to reproduce
+
+1. step1
+2. ...
+
+// If possible, attach a picture of your setup/wiring here.
+
+
+### Code to reproduce this issue
+
+```cpp
+// the code should be wrapped in the ```cpp tag so that it will be displayed better.
+#include "esp_log.h"
+
+void app_main()
+{
+
+}
+
+```
+// If your code is longer than 30 lines, [GIST](https://gist.github.com) is preferred.
+
+## Debug Logs
+
+```
+Debug log goes here, should contain the backtrace, as well as the reset source if it is a crash.
+Please copy the plain text here for us to search the error log. Or attach the complete logs but leave the main part here if the log is *too* long.
+```
+
+## Other items if possible
+
+- [ ] sdkconfig file (attach the sdkconfig file from your project folder)
+- [ ] elf file in the ``build`` folder (**note this may contain all the code details and symbols of your project.**)
+- [ ] coredump (This provides stacks of tasks.)

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,16 @@
+blank_issues_enabled: false
+contact_links:
+  - name: ESP-IDF Programming Guide
+    url: https://docs.espressif.com/projects/esp-idf/en/latest/
+    about: Documentation for configuring and using ESP-IDF
+  - name: Espressif documentation page
+    url: https://www.espressif.com/en/support/download/documents
+    about: Hardware documentation (datasheets, Technical Reference Manual, etc)
+  - name: Forum
+    url: https://esp32.com
+    about: For questions about using ESP-IDF and/or ESP32 series chips. Please submit all questions starting "How do I..." here.
+  - name: Hardware-related services
+    url: https://www.espressif.com/en/products/hardware-services
+    about: Espressif service providing hardware design and certification support
+
+

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,26 @@
+---
+name: Feature request
+about: Suggest an idea for ESP-IDF
+title: ''
+labels: 'Type: Feature Request'
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+
+A clear and concise description of any alternative solutions or features you've considered.
+
+Please give as many details as you can. Include suggestions for useful APIs or interfaces if relevant.
+
+**Additional context**
+
+Add any other context or screenshots about the feature request here.

.github/workflows/issue_comment.yml

@@ -0,0 +1,19 @@
+name: Sync issue comments to JIRA
+
+# This workflow will be triggered when new issue comment is created (including PR comments)
+on: issue_comment
+
+jobs:
+  sync_issue_comments_to_jira:
+    name: Sync Issue Comments to Jira
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@master
+      - name: Sync issue comments to JIRA
+        uses: espressif/github-actions/sync_issues_to_jira@master
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          JIRA_PASS: ${{ secrets.JIRA_PASS }}
+          JIRA_PROJECT: IDFGH
+          JIRA_URL: ${{ secrets.JIRA_URL }}
+          JIRA_USER: ${{ secrets.JIRA_USER }}

.github/workflows/new_issues.yml

@@ -0,0 +1,19 @@
+name: Sync issues to Jira
+
+# This workflow will be triggered when a new issue is opened
+on: issues
+
+jobs:
+  sync_issues_to_jira:
+    name: Sync issues to Jira
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@master
+      - name: Sync GitHub issues to Jira project
+        uses: espressif/github-actions/sync_issues_to_jira@master
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          JIRA_PASS: ${{ secrets.JIRA_PASS }}
+          JIRA_PROJECT: IDFGH
+          JIRA_URL: ${{ secrets.JIRA_URL }}
+          JIRA_USER: ${{ secrets.JIRA_USER }}

.github/workflows/new_prs.yml

@@ -0,0 +1,24 @@
+name: Sync remain PRs to Jira
+
+# This workflow will be triggered every hour, to sync remaining PRs (i.e. PRs with zero comment) to Jira project
+# Note that, PRs can also get synced when new PR comment is created
+on:
+  schedule:
+    - cron: "0 * * * *"
+
+jobs:
+  sync_prs_to_jira:
+    name: Sync PRs to Jira
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@master
+      - name: Sync PRs to Jira project
+        uses: espressif/github-actions/sync_issues_to_jira@master
+        with:
+          cron_job: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          JIRA_PASS: ${{ secrets.JIRA_PASS }}
+          JIRA_PROJECT: IDFGH
+          JIRA_URL: ${{ secrets.JIRA_URL }}
+          JIRA_USER: ${{ secrets.JIRA_USER }}

.github/workflows/python_lint.yml

@@ -0,0 +1,32 @@
+name: Python CI
+
+# This workflow will be triggered when a PR modifies some python relevant files
+on:
+  pull_request:
+    paths:
+      - "**.py"
+      - "requirements.txt"
+
+jobs:
+  python_lint:
+    name: python lint
+    runs-on: ubuntu-latest
+    strategy:
+      matrix:
+        python-version: [2.7, 3.5, 3.6, 3.7]
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@master
+      - name: Set up Python environment
+        uses: actions/setup-python@master
+        with:
+          python-version: ${{ matrix.python-version }}
+      - name: Install dependencies
+        run: |
+          pip install --upgrade pip
+          pip install -r requirements.txt
+      - name: Lint with flake8
+        run: |
+          pip install flake8
+          flake8 . --config=.flake8

.gitignore

@@ -36,6 +36,10 @@ docs/*/xml_in/
 docs/*/man/
 docs/doxygen_sqlite3.db
 
+# Downloaded font files
+docs/_static/DejaVuSans.ttf
+docs/_static/NotoSansSC-Regular.otf
+
 # Unit test app files
 tools/unit-test-app/sdkconfig
 tools/unit-test-app/sdkconfig.old
@@ -48,23 +52,31 @@ tools/test_idf_monitor/outputs
 
 TEST_LOGS
 
-# AWS IoT Examples require device-specific certs/keys
-examples/protocols/aws_iot/*/main/certs/*.pem.*
-
 # gcov coverage reports
 *.gcda
 *.gcno
 coverage.info
 coverage_report/
 
-# Windows tools installer build
-tools/windows/tool_setup/.*
-tools/windows/tool_setup/input
-tools/windows/tool_setup/dl
-tools/windows/tool_setup/keys
-tools/windows/tool_setup/Output
-
 test_multi_heap_host
 
 # VS Code Settings
 .vscode/
+
+# VIM files
+*.swp
+*.swo
+
+# Clion IDE CMake build & config
+.idea/
+cmake-build-*/
+
+# Results for the checking of the Python coding style and static analysis
+.mypy_cache
+flake8_output.txt
+
+# ESP-IDF default build directory name
+build
+
+# lock files for examples and components
+dependencies.lock

.gitmodules

@@ -1,63 +1,81 @@
-[submodule "components/esp32/lib"]
-	path = components/esp32/lib
-	url = https://github.com/espressif/esp32-wifi-lib.git
+#
+# All the relative URL paths are intended to be GitHub ones
+# For Espressif's public projects please use '../../espressif/proj', not a '../proj'
+#
 
 [submodule "components/esptool_py/esptool"]
 	path = components/esptool_py/esptool
-	url = https://github.com/espressif/esptool.git
+	url = ../../espressif/esptool.git
 
-[submodule "components/bt/lib"]
-	path = components/bt/lib
-	url = https://github.com/espressif/esp32-bt-lib.git
+[submodule "components/bt/controller/lib"]
+	path = components/bt/controller/lib
+	url = ../../espressif/esp32-bt-lib.git
 
-[submodule "components/micro-ecc/micro-ecc"]
-	path = components/micro-ecc/micro-ecc
-	url = https://github.com/kmackay/micro-ecc.git
+[submodule "components/bootloader/subproject/components/micro-ecc/micro-ecc"]
+	path = components/bootloader/subproject/components/micro-ecc/micro-ecc
+	url = ../../kmackay/micro-ecc.git
 
 [submodule "components/coap/libcoap"]
 	path = components/coap/libcoap
-	url = https://github.com/obgm/libcoap.git
-
-[submodule "components/aws_iot/aws-iot-device-sdk-embedded-C"]
-	path = components/aws_iot/aws-iot-device-sdk-embedded-C
-	url = https://github.com/espressif/aws-iot-device-sdk-embedded-C.git
+	url = ../../obgm/libcoap.git
 
 [submodule "components/nghttp/nghttp2"]
 	path = components/nghttp/nghttp2
-	url = https://github.com/nghttp2/nghttp2.git
+	url = ../../nghttp2/nghttp2.git
 
 [submodule "components/libsodium/libsodium"]
 	path = components/libsodium/libsodium
-	url = https://github.com/jedisct1/libsodium.git
+	url = ../../jedisct1/libsodium.git
 
 [submodule "components/spiffs/spiffs"]
 	path = components/spiffs/spiffs
-	url = https://github.com/pellepl/spiffs.git
+	url = ../../pellepl/spiffs.git
 
 [submodule "components/json/cJSON"]
 	path = components/json/cJSON
-	url = https://github.com/DaveGamble/cJSON.git
+	url = ../../DaveGamble/cJSON.git
 
 [submodule "components/mbedtls/mbedtls"]
 	path = components/mbedtls/mbedtls
-	url = https://github.com/espressif/mbedtls.git
+	url = ../../espressif/mbedtls.git
 
 [submodule "components/asio/asio"]
 	path = components/asio/asio
-	url = https://github.com/espressif/asio.git
+	url = ../../espressif/asio.git
 
 [submodule "components/expat/expat"]
 	path = components/expat/expat
-	url = https://github.com/libexpat/libexpat.git
+	url = ../../libexpat/libexpat.git
 
 [submodule "components/lwip/lwip"]
 	path = components/lwip/lwip
-	url = https://github.com/espressif/esp-lwip.git
+	url = ../../espressif/esp-lwip.git
 
 [submodule "components/mqtt/esp-mqtt"]
 	path = components/mqtt/esp-mqtt
-	url = https://github.com/espressif/esp-mqtt.git
+	url = ../../espressif/esp-mqtt.git
 
 [submodule "components/protobuf-c/protobuf-c"]
 	path = components/protobuf-c/protobuf-c
-	url = https://github.com/protobuf-c/protobuf-c
+	url = ../../protobuf-c/protobuf-c.git
+
+[submodule "components/unity/unity"]
+	path = components/unity/unity
+	url = ../../ThrowTheSwitch/Unity.git
+
+[submodule "examples/build_system/cmake/import_lib/main/lib/tinyxml2"]
+	path = examples/build_system/cmake/import_lib/main/lib/tinyxml2
+	url = ../../leethomason/tinyxml2.git
+
+[submodule "components/bt/host/nimble/nimble"]
+	path = components/bt/host/nimble/nimble
+	url = ../../espressif/esp-nimble.git
+
+[submodule "components/cbor/tinycbor"]
+	path = components/cbor/tinycbor
+	url = ../../intel/tinycbor.git
+
+[submodule "components/esp_wifi/lib"]
+	path = components/esp_wifi/lib
+	url = ../../espressif/esp32-wifi-lib.git
+

.readthedocs.yml

@@ -0,0 +1,21 @@
+# .readthedocs.yml
+# Read the Docs configuration file
+# See https://docs.readthedocs.io/en/stable/config-file/v2.html for details
+
+# Required
+version: 2
+
+# Optionally build your docs in additional formats such as PDF and ePub
+formats:
+  - pdf
+
+# Optionally set the version of Python and requirements required to build your docs
+python:
+  version: 2.7
+  install:
+    - requirements: docs/requirements.txt
+
+# We need to list all the submodules included in documenation build by DOxygen
+submodules: 
+  include:
+    - components/mqtt/esp-mqtt

CMakeLists.txt

@@ -0,0 +1,95 @@
+cmake_minimum_required(VERSION 3.5)
+project(esp-idf C CXX ASM)
+
+unset(compile_options)
+unset(c_compile_options)
+unset(cxx_compile_options)
+unset(compile_definitions)
+unset(link_options)
+
+# Add the following build specifications here, since these seem to be dependent
+# on config values on the root Kconfig.
+
+if(CONFIG_COMPILER_OPTIMIZATION_SIZE)
+    list(APPEND compile_options "-Os")
+    list(APPEND compile_options "-freorder-blocks")
+elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
+    list(APPEND compile_options "-Og")
+elseif(CONFIG_COMPILER_OPTIMIZATION_NONE)
+    list(APPEND compile_options "-O0")
+elseif(CONFIG_COMPILER_OPTIMIZATION_PERF)
+    list(APPEND compile_options "-O2")
+
+endif()
+
+if(CONFIG_COMPILER_CXX_EXCEPTIONS)
+    list(APPEND cxx_compile_options "-fexceptions")
+else()
+    list(APPEND cxx_compile_options "-fno-exceptions")
+endif()
+
+if(CONFIG_COMPILER_CXX_RTTI)
+    list(APPEND cxx_compile_options "-frtti")
+else()
+    list(APPEND cxx_compile_options "-fno-rtti")
+    list(APPEND link_options "-fno-rtti")           # used to invoke correct multilib variant (no-rtti) during linking
+endif()
+
+if(CONFIG_COMPILER_DISABLE_GCC8_WARNINGS)
+    list(APPEND compile_options "-Wno-parentheses"
+                                "-Wno-sizeof-pointer-memaccess"
+                                "-Wno-clobbered")
+
+    list(APPEND compile_options "-Wno-format-overflow"
+                                "-Wno-stringop-truncation"
+                                "-Wno-misleading-indentation"
+                                "-Wno-cast-function-type"
+                                "-Wno-implicit-fallthrough"
+                                "-Wno-unused-const-variable"
+                                "-Wno-switch-unreachable"
+                                "-Wno-format-truncation"
+                                "-Wno-memset-elt-size"
+                                "-Wno-int-in-bool-context")
+endif()
+
+if(CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE)
+    list(APPEND compile_definitions "-DNDEBUG")
+endif()
+
+if(CONFIG_COMPILER_STACK_CHECK_MODE_NORM)
+    list(APPEND compile_options "-fstack-protector")
+elseif(CONFIG_COMPILER_STACK_CHECK_MODE_STRONG)
+    list(APPEND compile_options "-fstack-protector-strong")
+elseif(CONFIG_COMPILER_STACK_CHECK_MODE_ALL)
+    list(APPEND compile_options "-fstack-protector-all")
+endif()
+
+list(APPEND link_options "-fno-lto")
+
+idf_build_set_property(COMPILE_OPTIONS "${compile_options}" APPEND)
+idf_build_set_property(C_COMPILE_OPTIONS "${c_compile_options}" APPEND)
+idf_build_set_property(CXX_COMPILE_OPTIONS "${cxx_compile_options}" APPEND)
+idf_build_set_property(COMPILE_DEFINITIONS "${compile_definitions}" APPEND)
+idf_build_set_property(LINK_OPTIONS "${link_options}" APPEND)
+
+idf_build_get_property(build_component_targets __BUILD_COMPONENT_TARGETS)
+
+# Add each component as a subdirectory, processing each component's CMakeLists.txt
+foreach(component_target ${build_component_targets})
+    __component_get_property(dir ${component_target} COMPONENT_DIR)
+    __component_get_property(_name ${component_target} COMPONENT_NAME)
+    __component_get_property(prefix ${component_target} __PREFIX)
+    __component_get_property(alias ${component_target} COMPONENT_ALIAS)
+    set(COMPONENT_NAME ${_name})
+    set(COMPONENT_DIR ${dir})
+    set(COMPONENT_ALIAS ${alias})
+    set(COMPONENT_PATH ${dir}) # for backward compatibility only, COMPONENT_DIR is preferred
+    idf_build_get_property(build_prefix __PREFIX)
+    set(__idf_component_context 1)
+    if(NOT prefix STREQUAL build_prefix)
+        add_subdirectory(${dir} ${prefix}_${_name})
+    else()
+        add_subdirectory(${dir} ${_name})
+    endif()
+    set(__idf_component_context 0)
+endforeach()

CONTRIBUTING.rst

@@ -53,6 +53,7 @@ Related Documents
 
     style-guide
     documenting-code
+    add-ons-reference
     creating-examples
     ../api-reference/template
     contributor-agreement

Kconfig

@@ -4,187 +4,350 @@
 #
 mainmenu "Espressif IoT Development Framework Configuration"
 
-config IDF_CMAKE
-    bool
-    option env="IDF_CMAKE"
+    config IDF_CMAKE
+        bool
+        option env="IDF_CMAKE"
 
-menu "SDK tool configuration"
-config TOOLPREFIX
-    string "Compiler toolchain path/prefix"
-    default "xtensa-esp32-elf-"
-    help
-        The prefix/path that is used to call the toolchain. The default setting assumes
-        a crosstool-ng gcc setup that is in your PATH.
+    config IDF_ENV_FPGA
+        # This option is for internal use only
+        bool
 
-config PYTHON
-    string "Python 2 interpreter"
-    depends on !IDF_CMAKE
-    default "python"
-    help
-        The executable name/path that is used to run python. On some systems Python 2.x
-        may need to be invoked as python2.
+    config IDF_TARGET
+        # This option records the IDF target when sdkconfig is generated the first time.
+        # It is not updated if environment variable $IDF_TARGET changes later, and
+        # the build system is responsible for detecting the mismatch between
+        # CONFIG_IDF_TARGET and $IDF_TARGET.
+        string
+        default "$IDF_TARGET"
 
-        (Note: This option is used with the GNU Make build system only, not idf.py
-        or CMake-based builds.)
+    config IDF_TARGET_ESP32
+        bool
+        default "y" if IDF_TARGET="esp32"
 
-config MAKE_WARN_UNDEFINED_VARIABLES
-    bool "'make' warns on undefined variables"
-    default "y"
-    help
-        Adds --warn-undefined-variables to MAKEFLAGS. This causes make to
-        print a warning any time an undefined variable is referenced.
+    config IDF_TARGET_ESP32S2BETA
+        bool
+        default "y" if IDF_TARGET="esp32s2beta"
+        select FREERTOS_UNICORE
 
-        This option helps find places where a variable reference is misspelled
-        or otherwise missing, but it can be unwanted if you have Makefiles which
-        depend on undefined variables expanding to an empty string.
+    config IDF_FIRMWARE_CHIP_ID
+        hex
+        default 0x0000 if IDF_TARGET_ESP32
+        # note: S2 beta uses Chip ID 0 still, S2 will use 0x0002
+        default 0x0000 if IDF_TARGET_ESP32S2BETA
+        default 0xFFFF
 
-endmenu  # SDK tool configuration
+    menu "SDK tool configuration"
+        config SDK_TOOLPREFIX
+            string "Compiler toolchain path/prefix"
+            default "xtensa-esp32-elf-" if IDF_TARGET_ESP32
+            default "xtensa-esp32s2-elf-" if IDF_TARGET_ESP32S2BETA
+            help
+                The prefix/path that is used to call the toolchain. The default setting assumes
+                a crosstool-ng gcc setup that is in your PATH.
 
-source "$COMPONENT_KCONFIGS_PROJBUILD"
+        config SDK_PYTHON
+            string "Python 2 interpreter"
+            depends on !IDF_CMAKE
+            default "python"
+            help
+                The executable name/path that is used to run python. On some systems Python 2.x
+                may need to be invoked as python2.
 
-menu "Compiler options"
+                (Note: This option is used with the legacy GNU Make build system only.)
 
-choice OPTIMIZATION_COMPILER
-    prompt "Optimization Level"
-    default OPTIMIZATION_LEVEL_DEBUG
-    help
-        This option sets compiler optimization level (gcc -O argument).
+        config SDK_MAKE_WARN_UNDEFINED_VARIABLES
+            bool "'make' warns on undefined variables"
+            depends on !IDF_CMAKE
+            default "y"
+            help
+                Adds --warn-undefined-variables to MAKEFLAGS. This causes make to
+                print a warning any time an undefined variable is referenced.
 
-        - for "Release" setting, -Os flag is added to CFLAGS.
-        - for "Debug" setting, -Og flag is added to CFLAGS.
+                This option helps find places where a variable reference is misspelled
+                or otherwise missing, but it can be unwanted if you have Makefiles which
+                depend on undefined variables expanding to an empty string.
 
-        "Release" with -Os produces smaller & faster compiled code but it
-        may be harder to correlated code addresses to source files when debugging.
+                (Note: this option is used with the legacy GNU Make build system only.)
 
-        To add custom optimization settings, set CFLAGS and/or CPPFLAGS
-        in project makefile, before including $(IDF_PATH)/make/project.mk. Note that
-        custom optimization levels may be unsupported.
+        config SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS
+            bool "Toolchain supports time_t wide 64-bits"
+            default n
+            help
+                Enable this option in case you have a custom toolchain which supports time_t wide 64-bits.
+                This option checks time_t is 64-bits and disables ROM time functions
+                to use the time functions from the toolchain instead.
+                This option allows resolving the Y2K38 problem.
+                See "Setup Linux Toolchain from Scratch" to build
+                a custom toolchain which supports 64-bits time_t.
 
-config OPTIMIZATION_LEVEL_DEBUG
-    bool "Debug (-Og)"
-config OPTIMIZATION_LEVEL_RELEASE
-    bool "Release (-Os)"
-endchoice
+                Note: ESP-IDF does not currently come with any pre-compiled toolchain
+                that supports 64-bit wide time_t.
+                This will change in a future major release,
+                but currently 64-bit time_t requires a custom built toolchain.
 
-choice OPTIMIZATION_ASSERTION_LEVEL
-    prompt "Assertion level"
-    default OPTIMIZATION_ASSERTIONS_ENABLED
-    help
-        Assertions can be:
+    endmenu  # SDK tool configuration
 
-        - Enabled. Failure will print verbose assertion details. This is the default.
+    menu "Build type"
 
-        - Set to "silent" to save code size (failed assertions will abort() but user
-          needs to use the aborting address to find the line number with the failed assertion.)
+        choice APP_BUILD_TYPE
+            prompt "Application build type"
+            default APP_BUILD_TYPE_APP_2NDBOOT
+            help
+                Select the way the application is built.
 
-        - Disabled entirely (not recommended for most configurations.) -DNDEBUG is added
-          to CPPFLAGS in this case.
+                By default, the application is built as a binary file in a format compatible with
+                the ESP32 bootloader. In addition to this application, 2nd stage bootloader is
+                also built. Application and bootloader binaries can be written into flash and
+                loaded/executed from there.
 
-config OPTIMIZATION_ASSERTIONS_ENABLED
-    prompt "Enabled"
-    bool
-    help
-        Enable assertions. Assertion content and line number will be printed on failure.
+                Another option, useful for only very small and limited applications, is to only link
+                the .elf file of the application, such that it can be loaded directly into RAM over
+                JTAG. Note that since IRAM and DRAM sizes are very limited, it is not possible to
+                build any complex application this way. However for kinds of testing and debugging,
+                this option may provide faster iterations, since the application does not need to be
+                written into flash.
+                Note that at the moment, ESP-IDF does not contain all the startup code required to
+                initialize the CPUs and ROM memory (data/bss). Therefore it is necessary to execute
+                a bit of ROM code prior to executing the application. A gdbinit file may look as follows:
 
-config OPTIMIZATION_ASSERTIONS_SILENT
-    prompt "Silent (saves code size)"
-    bool
-    help
-        Enable silent assertions. Failed assertions will abort(), user needs to
-        use the aborting address to find the line number with the failed assertion.
+                    # Connect to a running instance of OpenOCD
+                    target remote :3333
+                    # Reset and halt the target
+                    mon reset halt
+                    # Run to a specific point in ROM code,
+                    #  where most of initialization is complete.
+                    thb *0x40007901
+                    c
+                    # Load the application into RAM
+                    load
+                    # Run till app_main
+                    tb app_main
+                    c
 
-config OPTIMIZATION_ASSERTIONS_DISABLED
-    prompt "Disabled (sets -DNDEBUG)"
-    bool
-    help
-        If assertions are disabled, -DNDEBUG is added to CPPFLAGS.
+                Execute this gdbinit file as follows:
 
-endchoice # assertions
+                    xtensa-esp32-elf-gdb build/app-name.elf -x gdbinit
 
-menuconfig CXX_EXCEPTIONS
-   bool "Enable C++ exceptions"
-   default n
-   help
-       Enabling this option compiles all IDF C++ files with exception support enabled.
+                Recommended sdkconfig.defaults for building loadable ELF files is as follows.
+                CONFIG_APP_BUILD_TYPE_ELF_RAM is required, other options help reduce application
+                memory footprint.
 
-       Disabling this option disables C++ exception support in all compiled files, and any libstdc++ code which throws
-       an exception will abort instead.
-
-       Enabling this option currently adds an additional ~500 bytes of heap overhead
-       when an exception is thrown in user code for the first time.
-
-config CXX_EXCEPTIONS_EMG_POOL_SIZE
-    int "Emergency Pool Size"
-    default 0
-    depends on CXX_EXCEPTIONS
-    help
-       Size (in bytes) of the emergency memory pool for C++ exceptions. This pool will be used to allocate
-       memory for thrown exceptions when there is not enough memory on the heap.
-
-choice STACK_CHECK_MODE
-    prompt "Stack smashing protection mode"
-    default STACK_CHECK_NONE
-    help
-        Stack smashing protection mode. Emit extra code to check for buffer overflows, such as stack
-        smashing attacks. This is done by adding a guard variable to functions with vulnerable objects.
-        The guards are initialized when a function is entered and then checked when the function exits.
-        If a guard check fails, program is halted. Protection has the following modes:
-
-        - In NORMAL mode (GCC flag: -fstack-protector) only functions that call alloca,
-          and functions with buffers larger than 8 bytes are protected.
-        
-        - STRONG mode (GCC flag: -fstack-protector-strong) is like NORMAL, but includes
-          additional functions to be protected -- those that have local array definitions,
-          or have references to local frame addresses.
-        
-        - In OVERALL mode (GCC flag: -fstack-protector-all) all functions are protected.
-
-        Modes have the following impact on code performance and coverage:
-
-        - performance: NORMAL > STRONG > OVERALL
-        
-        - coverage: NORMAL < STRONG < OVERALL
+                    CONFIG_APP_BUILD_TYPE_ELF_RAM=y
+                    CONFIG_VFS_SUPPORT_TERMIOS=
+                    CONFIG_NEWLIB_NANO_FORMAT=y
+                    CONFIG_ESP32_PANIC_PRINT_HALT=y
+                    CONFIG_ESP32_DEBUG_STUBS_ENABLE=
+                    CONFIG_ESP_ERR_TO_NAME_LOOKUP=
 
 
-config STACK_CHECK_NONE
-    bool "None"
-config STACK_CHECK_NORM
-    bool "Normal"
-config STACK_CHECK_STRONG
-    bool "Strong"
-config STACK_CHECK_ALL
-    bool "Overall"
-endchoice
+            config APP_BUILD_TYPE_APP_2NDBOOT
+                bool
+                prompt "Default (binary application + 2nd stage bootloader)"
+                select APP_BUILD_GENERATE_BINARIES
+                select APP_BUILD_BOOTLOADER
+                select APP_BUILD_USE_FLASH_SECTIONS
 
-config STACK_CHECK
-    bool
-    default !STACK_CHECK_NONE
-    help
-        Stack smashing protection.
+            config APP_BUILD_TYPE_ELF_RAM
+                bool
+                prompt "ELF file, loadable into RAM (EXPERIMENTAL))"
+        endchoice # APP_BUILD_TYPE
 
-config WARN_WRITE_STRINGS
-    bool "Enable -Wwrite-strings warning flag"
-    default "n"
-    help
-        Adds -Wwrite-strings flag for the C/C++ compilers.
+        # Hidden options, set according to the choice above
+        config APP_BUILD_GENERATE_BINARIES
+            bool # Whether to generate .bin files or not
 
-        For C, this gives string constants the type ``const char[]`` so that
-        copying the address of one into a non-const ``char *`` pointer
-        produces a warning. This warning helps to find at compile time code
-        that tries to write into a string constant.
+        config APP_BUILD_BOOTLOADER
+            bool # Whether to build the bootloader
 
-        For C++, this warns about the deprecated conversion from string
-        literals to ``char *``.
+        config APP_BUILD_USE_FLASH_SECTIONS
+            bool # Whether to place code/data into memory-mapped flash sections
 
-config DISABLE_GCC8_WARNINGS
-    bool "Disable new warnings introduced in GCC 6 - 8"
-    default "n"
-    help
-        Enable this option if using GCC 6 or newer, and wanting to disable warnings which don't appear with GCC 5.
+    endmenu # Build type
+
+    source "$COMPONENT_KCONFIGS_PROJBUILD_SOURCE_FILE"
+
+    menu "Compiler options"
+
+        choice COMPILER_OPTIMIZATION
+            prompt "Optimization Level"
+            default COMPILER_OPTIMIZATION_DEFAULT
+            help
+                This option sets compiler optimization level (gcc -O argument).
+
+                - The "Default" setting will add the -0g flag to CFLAGS.
+                - The "Size" setting will add the -0s flag to CFLAGS.
+                - The "Performance" setting will add the -O2 flag to CFLAGS.
+                - The "None" setting will add the -O0 flag to CFLAGS.
+
+                The "Size" setting cause the compiled code to be smaller and faster, but
+                may lead to difficulties of correlating code addresses to source file
+                lines when debugging.
+
+                The "Performance" setting causes the compiled code to be larger and faster,
+                but will be easier to correlated code addresses to source file lines.
+
+                "None" with -O0 produces compiled code without optimization.
+
+                Note that custom optimization levels may be unsupported.
+
+            config COMPILER_OPTIMIZATION_DEFAULT
+                bool "Debug (-Og)"
+            config COMPILER_OPTIMIZATION_SIZE
+                bool "Optimize for size (-Os)"
+            config COMPILER_OPTIMIZATION_PERF
+                bool "Optimize for performance (-O2)"
+            config COMPILER_OPTIMIZATION_NONE
+                bool "Debug without optimization (-O0)"
+
+        endchoice
+
+        choice COMPILER_OPTIMIZATION_ASSERTION_LEVEL
+            prompt "Assertion level"
+            default COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE
+            help
+                Assertions can be:
+
+                - Enabled. Failure will print verbose assertion details. This is the default.
+
+                - Set to "silent" to save code size (failed assertions will abort() but user
+                  needs to use the aborting address to find the line number with the failed assertion.)
+
+                - Disabled entirely (not recommended for most configurations.) -DNDEBUG is added
+                  to CPPFLAGS in this case.
+
+            config COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE
+                prompt "Enabled"
+                bool
+                help
+                    Enable assertions. Assertion content and line number will be printed on failure.
+
+            config COMPILER_OPTIMIZATION_ASSERTIONS_SILENT
+                prompt "Silent (saves code size)"
+                bool
+                help
+                    Enable silent assertions. Failed assertions will abort(), user needs to
+                    use the aborting address to find the line number with the failed assertion.
+
+            config COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE
+                prompt "Disabled (sets -DNDEBUG)"
+                bool
+                help
+                    If assertions are disabled, -DNDEBUG is added to CPPFLAGS.
+
+        endchoice # assertions
+
+        menuconfig COMPILER_CXX_EXCEPTIONS
+            bool "Enable C++ exceptions"
+            default n
+            help
+                Enabling this option compiles all IDF C++ files with exception support enabled.
+
+                Disabling this option disables C++ exception support in all compiled files, and any libstdc++ code
+                which throws an exception will abort instead.
+
+                Enabling this option currently adds an additional ~500 bytes of heap overhead
+                when an exception is thrown in user code for the first time.
+
+        config COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE
+            int "Emergency Pool Size"
+            default 0
+            depends on COMPILER_CXX_EXCEPTIONS
+            help
+                Size (in bytes) of the emergency memory pool for C++ exceptions. This pool will be used to allocate
+                memory for thrown exceptions when there is not enough memory on the heap.
+
+        config COMPILER_CXX_RTTI
+            bool "Enable C++ run-time type info (RTTI)"
+            default n
+            help
+                Enabling this option compiles all C++ files with RTTI support enabled.
+                This increases binary size (typically by tens of kB) but allows using
+                dynamic_cast conversion and typeid operator.
+
+        choice COMPILER_STACK_CHECK_MODE
+            prompt "Stack smashing protection mode"
+            default COMPILER_STACK_CHECK_MODE_NONE
+            help
+                Stack smashing protection mode. Emit extra code to check for buffer overflows, such as stack
+                smashing attacks. This is done by adding a guard variable to functions with vulnerable objects.
+                The guards are initialized when a function is entered and then checked when the function exits.
+                If a guard check fails, program is halted. Protection has the following modes:
+
+                - In NORMAL mode (GCC flag: -fstack-protector) only functions that call alloca, and functions with
+                  buffers larger than 8 bytes are protected.
+
+                - STRONG mode (GCC flag: -fstack-protector-strong) is like NORMAL, but includes additional functions
+                  to be protected -- those that have local array definitions, or have references to local frame
+                  addresses.
+
+                - In OVERALL mode (GCC flag: -fstack-protector-all) all functions are protected.
+
+                Modes have the following impact on code performance and coverage:
+
+                - performance: NORMAL > STRONG > OVERALL
+
+                - coverage: NORMAL < STRONG < OVERALL
 
 
-endmenu # Compiler Options
+            config COMPILER_STACK_CHECK_MODE_NONE
+                bool "None"
+            config COMPILER_STACK_CHECK_MODE_NORM
+                bool "Normal"
+            config COMPILER_STACK_CHECK_MODE_STRONG
+                bool "Strong"
+            config COMPILER_STACK_CHECK_MODE_ALL
+                bool "Overall"
+        endchoice
 
-menu "Component config"
-source "$COMPONENT_KCONFIGS"
-endmenu
+        config COMPILER_STACK_CHECK
+            bool
+            default !COMPILER_STACK_CHECK_MODE_NONE
+            help
+                Stack smashing protection.
+
+        config COMPILER_WARN_WRITE_STRINGS
+            bool "Enable -Wwrite-strings warning flag"
+            default "n"
+            help
+                Adds -Wwrite-strings flag for the C/C++ compilers.
+
+                For C, this gives string constants the type ``const char[]`` so that
+                copying the address of one into a non-const ``char *`` pointer
+                produces a warning. This warning helps to find at compile time code
+                that tries to write into a string constant.
+
+                For C++, this warns about the deprecated conversion from string
+                literals to ``char *``.
+
+        config COMPILER_DISABLE_GCC8_WARNINGS
+            bool "Disable new warnings introduced in GCC 6 - 8"
+            default "n"
+            help
+                Enable this option if using GCC 6 or newer, and wanting to disable warnings which don't appear with
+                GCC 5.
+
+
+    endmenu # Compiler Options
+
+    menu "Component config"
+        source "$COMPONENT_KCONFIGS_SOURCE_FILE"
+    endmenu
+
+    menu "Compatibility options"
+        config LEGACY_INCLUDE_COMMON_HEADERS
+            bool "Include headers across components as before IDF v4.0"
+            default n
+            help
+                Soc, esp32, and driver components, the most common
+                components. Some header of these components are included
+                implicitly by headers of other components before IDF v4.0.
+                It's not required for high-level components, but still
+                included through long header chain everywhere.
+
+                This is harmful to the modularity. So it's changed in IDF
+                v4.0.
+
+                You can still include these headers in a legacy way until it
+                is totally deprecated by enable this option.
+
+    endmenu #Compatibility options

README.md

@@ -1,5 +1,7 @@
 # Espressif IoT Development Framework
 
+* [中文版](./README_CN.md)
+
 [![Documentation Status](https://readthedocs.com/projects/espressif-esp-idf/badge/?version=latest)](https://docs.espressif.com/projects/esp-idf/en/latest/?badge=latest)
 
 ESP-IDF is the official development framework for the [ESP32](https://espressif.com/en/products/hardware/esp32/overview) chip.
@@ -13,6 +15,14 @@ See setup guides for detailed instructions to set up the ESP-IDF:
 * [Getting Started Guide for the stable ESP-IDF version](https://docs.espressif.com/projects/esp-idf/en/stable/get-started/)
 * [Getting Started Guide for the latest (master branch) ESP-IDF version](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/)
 
+### Non-GitHub forks
+
+ESP-IDF uses relative locations as its submodules URLs ([.gitmodules](.gitmodules)). So they link to GitHub.
+If ESP-IDF is forked to a Git repository which is not on GitHub, you will need to run the script
+[tools/set-submodules-to-github.sh](tools/set-submodules-to-github.sh) after git clone.
+The script sets absolute URLs for all submodules, allowing `git submodule update --init --recursive` to complete.
+If cloning ESP-IDF from GitHub, this step is not needed.
+
 ## Finding a Project
 
 As well as the [esp-idf-template](https://github.com/espressif/esp-idf-template) project mentioned in Getting Started, ESP-IDF comes with some example projects in the [examples](examples) directory.
@@ -25,9 +35,17 @@ To start your own project based on an example, copy the example project director
 
 See the Getting Started guide links above for a detailed setup guide. This is a quick reference for common commands when working with ESP-IDF projects:
 
+## Setup Build Environment
+
+(See Getting Started guide for a full list of required steps with details.)
+
+* Install host build dependencies mentioned in Getting Started guide.
+* Add `tools/` directory to the PATH
+* Run `python -m pip install -r requirements.txt` to install Python dependencies
+
 ## Configuring the Project
 
-`make menuconfig`
+`idf.py menuconfig`
 
 * Opens a text-based configuration menu for the project.
 * Use up & down arrow keys to navigate the menu.
@@ -41,76 +59,48 @@ Once done configuring, press Escape multiple times to exit and say "Yes" to save
 
 ## Compiling the Project
 
-`make -j4 all`
+`idf.py build`
 
 ... will compile app, bootloader and generate a partition table based on the config.
 
-NOTE: The `-j4` option causes `make` to run 4 parallel jobs. This is much faster than the default single job. The recommended number to pass to this option is `-j(number of CPUs + 1)`.
-
 ## Flashing the Project
 
 When the build finishes, it will print a command line to use esptool.py to flash the chip. However you can also do this automatically by running:
 
-`make -j4 flash`
+`idf.py -p PORT flash`
 
-This will flash the entire project (app, bootloader and partition table) to a new chip. The settings for serial port flashing can be configured with `make menuconfig`.
+Replace PORT with the name of your serial port (like `COM3` on Windows, `/dev/ttyUSB0` on Linux, or `/dev/cu.usbserial-X` on MacOS. If the `-p` option is left out, `idf.py flash` will try to flash the first available serial port.
 
-You don't need to run `make all` before running `make flash`, `make flash` will automatically rebuild anything which needs it.
+This will flash the entire project (app, bootloader and partition table) to a new chip. The settings for serial port flashing can be configured with `idf.py menuconfig`.
+
+You don't need to run `idf.py build` before running `idf.py flash`, `idf.py flash` will automatically rebuild anything which needs it.
 
 ## Viewing Serial Output
 
-The `make monitor` target uses the [idf_monitor tool](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html) to display serial output from the ESP32. idf_monitor also has a range of features to decode crash output and interact with the device. [Check the documentation page for details](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html).
+The `idf.py monitor` target uses the [idf_monitor tool](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html) to display serial output from the ESP32. idf_monitor also has a range of features to decode crash output and interact with the device. [Check the documentation page for details](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html).
 
 Exit the monitor by typing Ctrl-].
 
 To build, flash and monitor output in one pass, you can run:
 
-`make -j4 flash monitor`
+`idf.py flash monitor`
 
 ## Compiling & Flashing Only the App
 
 After the initial flash, you may just want to build and flash just your app, not the bootloader and partition table:
 
-* `make app` - build just the app.
-* `make app-flash` - flash just the app.
+* `idf.py app` - build just the app.
+* `idf.py app-flash` - flash just the app.
 
-`make app-flash` will automatically rebuild the app if any source files have changed.
+`idf.py app-flash` will automatically rebuild the app if any source files have changed.
 
 (In normal development there's no downside to reflashing the bootloader and partition table each time, if they haven't changed.)
 
-## Parallel Builds
-
-ESP-IDF supports compiling multiple files in parallel, so all of the above commands can be run as `make -jN` where `N` is the number of parallel make processes to run (generally N should be equal to the number of CPU cores in your system, plus one.)
-
-Multiple make functions can be combined into one. For example: to build the app & bootloader using 5 jobs in parallel, then flash everything, and then display serial output from the ESP32 run:
-
-```
-make -j5 flash monitor
-```
-
-
-## The Partition Table
-
-Once you've compiled your project, the "build" directory will contain a binary file with a name like "my_app.bin". This is an ESP32 image binary that can be loaded by the bootloader.
-
-A single ESP32's flash can contain multiple apps, as well as many different kinds of data (calibration data, filesystems, parameter storage, etc). For this reason a partition table is flashed to offset 0x8000 in the flash.
-
-Each entry in the partition table has a name (label), type (app, data, or something else), subtype and the offset in flash where the partition is loaded.
-
-The simplest way to use the partition table is to `make menuconfig` and choose one of the simple predefined partition tables:
-
-* "Single factory app, no OTA"
-* "Factory app, two OTA definitions"
-
-In both cases the factory app is flashed at offset 0x10000. If you `make partition_table` then it will print a summary of the partition table.
-
-For more details about partition tables and how to create custom variations, view the [`docs/en/api-guides/partition-tables.rst`](docs/en/api-guides/partition-tables.rst) file.
-
 ## Erasing Flash
 
-The `make flash` target does not erase the entire flash contents. However it is sometimes useful to set the device back to a totally erased state, particularly when making partition table changes or OTA app updates. To erase the entire flash, run `make erase_flash`.
+The `idf.py flash` target does not erase the entire flash contents. However it is sometimes useful to set the device back to a totally erased state, particularly when making partition table changes or OTA app updates. To erase the entire flash, run `idf.py erase_flash`.
 
-This can be combined with other targets, ie `make erase_flash flash` will erase everything and then re-flash the new app, bootloader and partition table.
+This can be combined with other targets, ie `idf.py -p PORT erase_flash flash` will erase everything and then re-flash the new app, bootloader and partition table.
 
 # Resources
 

README_CN.md

@@ -0,0 +1,112 @@
+# Espressif 物联网开发框架
+
+* [English Version](./README.md)
+
+[![Documentation Status](https://readthedocs.com/projects/espressif-esp-idf/badge/?version=latest)](https://docs.espressif.com/projects/esp-idf/zh_CN/latest/?badge=latest)
+
+ESP-IDF 是由乐鑫官方推出的针对 [ESP32](https://espressif.com/en/products/hardware/esp32/overview) 系列芯片的开发框架。
+
+# 使用 ESP-IDF 进行开发
+
+## 搭建 ESP-IDF 开发环境
+
+请参阅如下指南搭建 ESP-IDF 的开发环境：
+
+* [ESP-IDF 稳定版本的入门指南](https://docs.espressif.com/projects/esp-idf/en/stable/get-started/)
+* [ESP-IDF 开发版本（master 分支）的入门指南](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/)
+
+### 非 GitHub 分叉的 ESP-IDF 项目
+
+ESP-IDF 中的子模块采用相对路径（[详见 .gitmodules 文件](.gitmodules)），所以它们会指向 GitHub。
+如果 ESP-IDF 被分叉到的仓库不在 GitHub 上，那么你需要在克隆结束后运行该[脚本](tools/set-submodules-to-github.sh)。它会为所有的子模块设置绝对路径，接着可以通过 `git submodule update --init --recursive` 完成子模块的更新。
+如果 ESP-IDF 是从 GitHub 上克隆得到，则不需要此步骤。
+
+## 寻找项目
+
+除了入门指南中提到的 [esp-idf 模板项目](https://github.com/espressif/esp-idf-template)，ESP-IDF 的 [examples](examples) 目录下还带有很多其它示例项目。
+
+一旦找到了需要的项目，便可以进入该目录，执行配置和构建操作。
+
+如果要基于示例工程开始你自己的项目，请将示例工程复制到 ESP-IDF 目录之外。
+
+# 快速参考
+
+详细的使用方法请参考上面入门指南的链接，这里仅仅列举一些 ESP-IDF 项目开发中常用的命令：
+
+## 设置构建环境
+
+（请参考入门指南中列出的详细步骤。）
+* 在主机中安装入门指南中提到的构建所依赖的工具。
+* 将 ESP-IDF 中的 `tools/` 目录加入 PATH 环境变量中。
+* 运行 `python -m pip install -r requirements.txt` 安装 Python 依赖库。
+
+## 配置项目
+
+`idf.py menuconfig`
+
+* 打开项目的文本配置菜单。
+* 使用上下键浏览菜单。
+* 使用回车键进入子菜单，退出键返回上一级菜单或者退出配置。
+* 输入 `?` 查看帮助界面，按下回车键可以退出帮助界面。
+* 使用空格键或者 `Y` 和 `N` 按键来启用和禁用带复选框“`[*]`”的配置项。
+* 高亮某个配置项的同时按下 `?` 键可以显示该选项的帮助文档。
+* 输入 `/` 可以搜索指定的配置项。
+
+一旦配置完成，请按下退出键多次以退出配置界面，当提示是否保存新的的配置时，选择 “Yes”。
+
+## 编译项目
+
+`idf.py build`
+
+编译应用程序，引导程序，并根据配置生成分区表。
+
+## 烧写项目
+
+当构建结束，终端会打印出一条命令行，告知如何使用 esptool.py 工具烧写项目到芯片中。但是你还可以运行下面这条命令来自动烧写：
+
+`idf.py -p PORT flash`
+
+将其中的 PORT 替换为系统中实际串口的名字（比如 Windows 下的 `COM3`，Linux 下的 `/dev/ttyUSB0`，或者 MacOS 下的 `/dev/cu.usbserial-X`。如果省略 `-p` 选项，`idf.py flash` 会尝试使用第一个可用的串口进行烧写。
+
+这会烧写整个项目（包括应用程序，引导程序和分区表）到芯片中，此外还可以使用 `idf.py menuconfig` 来调整串口烧写相关的配置。
+
+你也不必先运行 `idf.py build`，再运行 `idf.py flash`，`idf.py flash` 会根据需要自动重新构建项目。
+
+## 观察串口输入
+
+`idf.py monitor` 会调用 [idf_monitor 工具](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html)来显示 ESP32 的串口输出。`idf_monitor` 还包含一系列的功能来解析程序崩溃后的输出结果并与设备进行交互。更多详细内容，请参阅[文档](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/idf-monitor.html).
+
+输入 `Ctrl-]` 可退出监视器。
+
+想要一次性执行构建，烧写和监视，可以运行如下命令：
+
+`idf.py flash monitor`
+
+## 仅编译并烧写应用程序
+
+在第一次烧写过后，你可能只想构建并烧写你的应用程序，不包括引导程序和分区表：
+
+* `idf.py app` - 仅构建应用程序。
+* `idf.py app-flash` - 仅烧写应用程序。
+
+`idf.py app-flash` 会自动判断是否有源文件发生了改变而后重新构建应用程序。
+
+（在正常的开发中，即使引导程序和分区表没有发生变化，每次都重新烧写它们并不会带来什么危害。）
+
+## 擦除 Flash
+
+`idf.py flash` 并不会擦除 Flash 上所有的内容，但是有时候我们需要设备恢复到完全擦除的状态，尤其是分区表发生了变化或者 OTA 应用升级。要擦除整块 Flash 请运行 `idf.py erase_flash`。
+
+这条命令还可以和其余命令整合在一起，`idf.py -p PORT erase_flash flash` 会擦除一切然后重新烧写新的应用程序，引导程序和分区表。
+
+# 其它参考资源
+
+* 最新版的文档：https://docs.espressif.com/projects/esp-idf/ ，该文档是由本仓库 [docs 目录](docs) 构建得到。
+
+* 可以前往 [esp32.com 论坛](https://esp32.com/) 提问，挖掘社区资源。
+
+* 如果你在使用中发现了错误或者需要新的功能，请先[查看 GitHub Issues](https://github.com/espressif/esp-idf/issues)，确保该问题不会被重复提交。
+
+* 如果你有兴趣为 ESP-IDF 作贡献，请先阅读[贡献指南](https://docs.espressif.com/projects/esp-idf/en/latest/contribute/index.html)。
+
+

SUPPORT_POLICY.md

@@ -0,0 +1,68 @@
+The latest support policy for ESP-IDF can be found at [https://github.com/espressif/esp-idf/blob/master/SUPPORT_POLICY.md](https://github.com/espressif/esp-idf/blob/master/SUPPORT_POLICY.md)
+
+Support Period Policy
+=====================
+
+* [中文版](./SUPPORT_POLICY_CN.md)
+
+Each ESP-IDF major and minor release (V4.0, V4.1, etc) is supported for
+18 months after the initial stable release date.
+
+Supported means that the ESP-IDF team will continue to apply bug fixes,
+security fixes, etc to the release branch on GitHub, and periodically
+make new bugfix releases as needed.
+
+Users are encouraged to upgrade to a newer ESP-IDF release before the
+support period finishes and the release becomes End of Life (EOL). It is
+our policy to not continue fixing bugs in End of Life releases.
+
+Pre-release versions (betas, previews, `-rc` and `-dev` versions, etc)
+are not covered by any support period. Sometimes a particular feature is
+marked as \"Preview\" in a release, which means it is also not covered
+by the support period.
+
+The ESP-IDF Programming Guide has information about the
+[different versions of ESP-IDF](https://docs.espressif.com/projects/esp-idf/en/latest/versions.html)
+(major, minor, bugfix, etc).
+
+Long Term Support releases
+--------------------------
+
+Some releases (starting with ESP-IDF V3.3) are designated Long Term
+Support (LTS). LTS releases are supported for 30 months (2.5 years)
+after the initial stable release date.
+
+A new LTS release will be made at least every 18 months. This means
+there will always be a period of at least 12 months to upgrade from the
+previous LTS release to the following LTS release.
+
+Example
+-------
+
+ESP-IDF V3.3 was released in September 2019 and is a Long Term Support
+(LTS) release, meaning it will be supported for 30 months until February
+2022.
+
+- The first V3.3 release was `v3.3` in September 2019.
+- The ESP-IDF team continues to backport bug fixes, security fixes,
+  etc to the release branch `release/v3.3`.
+- Periodically stable bugfix releases are created from the release
+  branch. For example `v3.3.1`, `v3.3.2`, etc. Users are encouraged to
+  always update to the latest bugfix release.
+- V3.3 bugfix releases continue until February 2022, when all V3.3.x
+  releases become End of Life.
+
+Existing Releases
+-----------------
+
+ESP-IDF release V3.3 and all newer releases will follow this support
+period policy.  The support period for each release will be announced
+when the release is made.
+
+For releases made before the support period policy was announced,
+the following support periods apply:
+
+- ESP-IDF V3.1.x and V3.2.x will both be supported until October 2020.
+- ESP-IDF V3.0.9 (planned for October 2019) will be the last V3.0
+  bugfix release. ESP-IDF V3.0.x is End of Life from October 2019.
+- ESP-IDF versions before V3.0 are already End of Life.

SUPPORT_POLICY_CN.md

@@ -0,0 +1,43 @@
+有关 ESP-IDF 的最新支持政策，详见 [支持期限政策](./SUPPORT_POLICY_CN.md)。
+支持期限政策
+=================
+
+* [English Version](./SUPPORT_POLICY.md)
+
+ESP-IDF 的每个主要版本和次要版本（如 V4.0、V4.1 等）自其首次稳定版本发布之日起将维护 18 个月。
+
+维护意味着 ESP-IDF 团队将会对 GitHub 上的发布分支继续进行 bug 修复、安全修补等，并根据需求定期发布新的 bugfix 版本。
+
+在某一版本支持期限结束，停止更新维护 (EOL) 前，建议用户升级到较新的 ESP-IDF 版本。根据《支持期限政策》，我们将停止对 EOL 版本进行 bug 修复。
+
+《支持期限政策》不适用于预发布版本（包括 beta、preview、`-rc` 和 `-dev` 版本等）。有时，在发布的版本中存在被标记为 "Preview" 的特定功能，则该功能也不在支持期限内。
+
+有关 [ ESP-IDF 不同版本](https://docs.espressif.com/projects/esp-idf/zh_CN/latest/versions.html)（主要版本、次要版本、bugfix 版本等）信息，可参阅《ESP-IDF 编程指南》。
+
+长期支持版本
+------------
+
+有些发布版本（从 ESP-IDF V3.3 开始）属于长期支持 (LTS) 版本。LTS 版本将自其首次稳定版本发布之日起维护 30 个月（2.5 年）。
+
+我们将至少每 18 个月发布一个新的 LTS 版本。这意味着将至少有 12 个月的期限可更新至下一个 LTS 版本。
+
+示例
+-----
+
+ESP-IDF V3.3 于 2019 年 9 月发布，属于 LTS 版本，将维护 30 个月至 2022 年 2 月停止。
+
+- V3.3 的首个发布版本为 2019 年 9 月发布的 `v3.3`。
+- ESP-IDF 团队将持续进行 bug 修复、安全修补等更新，并 backport 至分支 `release/v3.3`。
+- 定期从 release 分支创建稳定的 bugfix 版本，比如，`v3.3.1`、`v3.3.2` 等，并建议用户保持使用最新的 bugfix 版本。
+- V3.3 的 bugfix 版本发布将持续至 2022 年 2 月，届时所有 V3.3.x 将停止更新维护。
+
+现有版本
+--------
+
+ESP-IDF V3.3 及所有后续更新版本都将遵守该《支持期限政策》。每一版本发布时将同时公布其支持期限。
+
+对于该政策公布之日前发布的版本，应适用下述支持期限：
+
+- ESP-IDF V3.1.x 和 V3.2.x 将维护至 2020 年 10 月。
+- ESP-IDF V3.0.9（计划 2019 年 10 月发布）将是 V3.0 的最后一个 bugfix 版本。ESP-IDF V3.0.x 自 2019 年 10 月起停止更新维护 (EOL)。
+- ESP-IDF 中 V3.0 之前的版本均已停止更新维护 (EOL)。

add_path.sh

@@ -9,7 +9,7 @@
 if [ -z ${IDF_PATH} ]; then
 	echo "IDF_PATH must be set before including this script."
 else
-	IDF_ADD_PATHS_EXTRAS="${IDF_ADD_PATHS_EXTRAS}:${IDF_PATH}/components/esptool_py/esptool"
+	IDF_ADD_PATHS_EXTRAS="${IDF_PATH}/components/esptool_py/esptool"
 	IDF_ADD_PATHS_EXTRAS="${IDF_ADD_PATHS_EXTRAS}:${IDF_PATH}/components/espcoredump"
 	IDF_ADD_PATHS_EXTRAS="${IDF_ADD_PATHS_EXTRAS}:${IDF_PATH}/components/partition_table/"
 	IDF_ADD_PATHS_EXTRAS="${IDF_ADD_PATHS_EXTRAS}:${IDF_PATH}/tools/"

components/app_trace/CMakeLists.txt

@@ -1,28 +1,42 @@
-set(COMPONENT_SRCS "app_trace.c"
-                   "app_trace_util.c"
-                   "host_file_io.c"
-                   "gcov/gcov_rtio.c")
-set(COMPONENT_ADD_INCLUDEDIRS "include")
+set(srcs 
+    "app_trace.c"
+    "app_trace_util.c"
+    "host_file_io.c"
+    "gcov/gcov_rtio.c")
+
+set(include_dirs "include")
 
 if(CONFIG_SYSVIEW_ENABLE)
-    list(APPEND COMPONENT_ADD_INCLUDEDIRS
+    list(APPEND include_dirs
         sys_view/Config
         sys_view/SEGGER
         sys_view/Sample/OS)
 
-    list(APPEND COMPONENT_SRCS "sys_view/SEGGER/SEGGER_SYSVIEW.c"
-                   "sys_view/Sample/Config/SEGGER_SYSVIEW_Config_FreeRTOS.c"
-                   "sys_view/Sample/OS/SEGGER_SYSVIEW_FreeRTOS.c"
-                   "sys_view/esp32/SEGGER_RTT_esp32.c")
+    list(APPEND srcs 
+        "sys_view/SEGGER/SEGGER_SYSVIEW.c"
+        "sys_view/Sample/Config/SEGGER_SYSVIEW_Config_FreeRTOS.c"
+        "sys_view/Sample/OS/SEGGER_SYSVIEW_FreeRTOS.c"
+        "sys_view/esp32/SEGGER_RTT_esp32.c"
+        "sys_view/ext/heap_trace_module.c"
+        "sys_view/ext/logging.c")
 endif()
 
-set(COMPONENT_REQUIRES)
-set(COMPONENT_PRIV_REQUIRES xtensa-debug-module)
+if(CONFIG_HEAP_TRACING_TOHOST)
+    list(APPEND srcs "heap_trace_tohost.c")
+    set_source_files_properties(heap_trace_tohost.c
+        PROPERTIES COMPILE_FLAGS
+        -Wno-frame-address)
+endif()
 
-register_component()
+idf_component_register(SRCS "${srcs}"
+                       INCLUDE_DIRS "${include_dirs}"
+                       PRIV_REQUIRES soc
+                       LDFRAGMENTS linker.lf)
 
 # disable --coverage for this component, as it is used as transport
 # for gcov
-component_compile_options("-fno-profile-arcs" "-fno-test-coverage")
+target_compile_options(${COMPONENT_LIB} PRIVATE "-fno-profile-arcs" "-fno-test-coverage")
 
-target_link_libraries(app_trace gcov)
+# Force app_trace to also appear later than gcov in link line
+idf_component_get_property(app_trace app_trace COMPONENT_LIB)
+target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${app_trace}> gcov $<TARGET_FILE:${app_trace}> ${LIBC})

components/app_trace/Kconfig

@@ -1,202 +1,221 @@
 menu "Application Level Tracing"
 
-choice ESP32_APPTRACE_DESTINATION
-    prompt "Data Destination"
-    default ESP32_APPTRACE_DEST_NONE
-    help
-        Select destination for application trace: trace memory or none (to disable).
+    choice APPTRACE_DESTINATION
+        prompt "Data Destination"
+        default APPTRACE_DEST_NONE
+        help
+            Select destination for application trace: trace memory or none (to disable).
 
-config ESP32_APPTRACE_DEST_TRAX
-    bool "Trace memory"
-    select ESP32_APPTRACE_ENABLE
-config ESP32_APPTRACE_DEST_NONE
-    bool "None"
-endchoice
+        config APPTRACE_DEST_TRAX
+            bool "Trace memory"
+            select APPTRACE_ENABLE
+        config APPTRACE_DEST_NONE
+            bool "None"
+    endchoice
 
-config ESP32_APPTRACE_ENABLE
-    bool
-    depends on !ESP32_TRAX
-    select MEMMAP_TRACEMEM
-    select MEMMAP_TRACEMEM_TWOBANKS
-    default n
-    help
-        Enables/disable application tracing module.
+    config APPTRACE_ENABLE
+        bool
+        depends on !ESP32_TRAX && !ESP32S2_TRAX
+        select ESP32_MEMMAP_TRACEMEM
+        select ESP32S2_MEMMAP_TRACEMEM
+        select ESP32_MEMMAP_TRACEMEM_TWOBANKS
+        select ESP32S2_MEMMAP_TRACEMEM_TWOBANKS
+        default n
+        help
+            Enables/disable application tracing module.
 
-config ESP32_APPTRACE_LOCK_ENABLE
-    bool
-    default !SYSVIEW_ENABLE
-    help
-        Enables/disable application tracing module internal sync lock.
+    config APPTRACE_LOCK_ENABLE
+        bool
+        default !SYSVIEW_ENABLE
+        help
+            Enables/disable application tracing module internal sync lock.
 
-config ESP32_APPTRACE_ONPANIC_HOST_FLUSH_TMO
-    int "Timeout for flushing last trace data to host on panic"
-    depends on ESP32_APPTRACE_ENABLE
-    range -1 5000
-    default -1
-    help
-        Timeout for flushing last trace data to host in case of panic. In ms.
-        Use -1 to disable timeout and wait forever.
+    config APPTRACE_ONPANIC_HOST_FLUSH_TMO
+        int "Timeout for flushing last trace data to host on panic"
+        depends on APPTRACE_ENABLE
+        range -1 5000
+        default -1
+        help
+            Timeout for flushing last trace data to host in case of panic. In ms.
+            Use -1 to disable timeout and wait forever.
 
-config ESP32_APPTRACE_POSTMORTEM_FLUSH_TRAX_THRESH
-    int "Threshold for flushing last trace data to host on panic"
-    depends on ESP32_APPTRACE_DEST_TRAX
-    range 0 16384
-    default 0
-    help
-        Threshold for flushing last trace data to host on panic in post-mortem mode.
-        This is minimal amount of data needed to perform flush. In bytes.
+    config APPTRACE_POSTMORTEM_FLUSH_THRESH
+        int "Threshold for flushing last trace data to host on panic"
+        depends on APPTRACE_DEST_TRAX
+        range 0 16384
+        default 0
+        help
+            Threshold for flushing last trace data to host on panic in post-mortem mode.
+            This is minimal amount of data needed to perform flush. In bytes.
 
-config ESP32_APPTRACE_PENDING_DATA_SIZE_MAX
-    int "Size of the pending data buffer"
-    depends on ESP32_APPTRACE_DEST_TRAX
-    default 0
-    help
-        Size of the buffer for events in bytes. It is useful for buffering events from
-        the time critical code (scheduler, ISRs etc). If this parameter is 0 then
-        events will be discarded when main HW buffer is full.
+    config APPTRACE_PENDING_DATA_SIZE_MAX
+        int "Size of the pending data buffer"
+        depends on APPTRACE_DEST_TRAX
+        default 0
+        help
+            Size of the buffer for events in bytes. It is useful for buffering events from
+            the time critical code (scheduler, ISRs etc). If this parameter is 0 then
+            events will be discarded when main HW buffer is full.
 
-menu "FreeRTOS SystemView Tracing"
-    depends on ESP32_APPTRACE_ENABLE
-config SYSVIEW_ENABLE
-    bool "SystemView Tracing Enable"
-    depends on ESP32_APPTRACE_ENABLE
-    default n
-    help
-        Enables supporrt for SEGGER SystemView tracing functionality.
+    menu "FreeRTOS SystemView Tracing"
+        depends on APPTRACE_ENABLE
+        config SYSVIEW_ENABLE
+            bool "SystemView Tracing Enable"
+            depends on APPTRACE_ENABLE
+            default n
+            help
+                Enables supporrt for SEGGER SystemView tracing functionality.
 
-choice SYSVIEW_TS_SOURCE
-    prompt "Timer to use as timestamp source"
-    depends on SYSVIEW_ENABLE
-    default SYSVIEW_TS_SOURCE_CCOUNT if FREERTOS_UNICORE && !PM_ENABLE
-    default SYSVIEW_TS_SOURCE_TIMER_00 if !FREERTOS_UNICORE && !PM_ENABLE
-    default SYSVIEW_TS_SOURCE_ESP_TIMER if PM_ENABLE
-    help
-        SystemView needs to use a hardware timer as the source of timestamps
-        when tracing. This option selects the timer for it.
+        choice SYSVIEW_TS_SOURCE
+            prompt "Timer to use as timestamp source"
+            depends on SYSVIEW_ENABLE
+            default SYSVIEW_TS_SOURCE_CCOUNT if FREERTOS_UNICORE && !PM_ENABLE
+            default SYSVIEW_TS_SOURCE_TIMER_00 if !FREERTOS_UNICORE && !PM_ENABLE
+            default SYSVIEW_TS_SOURCE_ESP_TIMER if PM_ENABLE
+            help
+                SystemView needs to use a hardware timer as the source of timestamps
+                when tracing. This option selects the timer for it.
 
-config SYSVIEW_TS_SOURCE_CCOUNT
-	bool "CPU cycle counter (CCOUNT)"
-	depends on FREERTOS_UNICORE && !PM_ENABLE
+            config SYSVIEW_TS_SOURCE_CCOUNT
+                bool "CPU cycle counter (CCOUNT)"
+                depends on FREERTOS_UNICORE && !PM_ENABLE
 
-config SYSVIEW_TS_SOURCE_TIMER_00
-    bool "Timer 0, Group 0"
-    depends on !PM_ENABLE
+            config SYSVIEW_TS_SOURCE_TIMER_00
+                bool "Timer 0, Group 0"
+                depends on !PM_ENABLE
 
-config SYSVIEW_TS_SOURCE_TIMER_01
-    bool "Timer 1, Group 0"
-    depends on !PM_ENABLE
+            config SYSVIEW_TS_SOURCE_TIMER_01
+                bool "Timer 1, Group 0"
+                depends on !PM_ENABLE
 
-config SYSVIEW_TS_SOURCE_TIMER_10
-    bool "Timer 0, Group 1"
-    depends on !PM_ENABLE
+            config SYSVIEW_TS_SOURCE_TIMER_10
+                bool "Timer 0, Group 1"
+                depends on !PM_ENABLE
 
-config SYSVIEW_TS_SOURCE_TIMER_11
-    bool "Timer 1, Group 1"
-    depends on !PM_ENABLE
+            config SYSVIEW_TS_SOURCE_TIMER_11
+                bool "Timer 1, Group 1"
+                depends on !PM_ENABLE
 
-config SYSVIEW_TS_SOURCE_ESP_TIMER
-	bool "esp_timer high resolution timer"
+            config SYSVIEW_TS_SOURCE_ESP_TIMER
+                bool "esp_timer high resolution timer"
 
-endchoice
+        endchoice
 
-config SYSVIEW_EVT_OVERFLOW_ENABLE
-    bool "Trace Buffer Overflow Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Trace Buffer Overflow" event.
+        config SYSVIEW_MAX_TASKS
+            int "Maximum supported tasks"
+            depends on SYSVIEW_ENABLE
+            range 1 64
+            default 16
+            help
+                Configures maximum supported tasks in sysview debug
 
-config SYSVIEW_EVT_ISR_ENTER_ENABLE
-    bool "ISR Enter Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "ISR Enter" event.
+        config SYSVIEW_BUF_WAIT_TMO
+            int "Trace buffer wait timeout"
+            depends on SYSVIEW_ENABLE
+            default 500
+            help
+                Configures timeout (in us) to wait for free space in trace buffer.
+                Set to -1 to wait forever and avoid lost events.
 
-config SYSVIEW_EVT_ISR_EXIT_ENABLE
-    bool "ISR Exit Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "ISR Exit" event.
+        config SYSVIEW_EVT_OVERFLOW_ENABLE
+            bool "Trace Buffer Overflow Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Trace Buffer Overflow" event.
 
-config SYSVIEW_EVT_ISR_TO_SCHEDULER_ENABLE
-    bool "ISR Exit to Scheduler Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "ISR to Scheduler" event.
+        config SYSVIEW_EVT_ISR_ENTER_ENABLE
+            bool "ISR Enter Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "ISR Enter" event.
 
-config SYSVIEW_EVT_TASK_START_EXEC_ENABLE
-    bool "Task Start Execution Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Start Execution" event.
+        config SYSVIEW_EVT_ISR_EXIT_ENABLE
+            bool "ISR Exit Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "ISR Exit" event.
 
-config SYSVIEW_EVT_TASK_STOP_EXEC_ENABLE
-    bool "Task Stop Execution Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Stop Execution" event.
+        config SYSVIEW_EVT_ISR_TO_SCHEDULER_ENABLE
+            bool "ISR Exit to Scheduler Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "ISR to Scheduler" event.
 
-config SYSVIEW_EVT_TASK_START_READY_ENABLE
-    bool "Task Start Ready State Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Start Ready State" event.
+        config SYSVIEW_EVT_TASK_START_EXEC_ENABLE
+            bool "Task Start Execution Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Start Execution" event.
 
-config SYSVIEW_EVT_TASK_STOP_READY_ENABLE
-    bool "Task Stop Ready State Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Stop Ready State" event.
+        config SYSVIEW_EVT_TASK_STOP_EXEC_ENABLE
+            bool "Task Stop Execution Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Stop Execution" event.
 
-config SYSVIEW_EVT_TASK_CREATE_ENABLE
-    bool "Task Create Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Create" event.
+        config SYSVIEW_EVT_TASK_START_READY_ENABLE
+            bool "Task Start Ready State Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Start Ready State" event.
 
-config SYSVIEW_EVT_TASK_TERMINATE_ENABLE
-    bool "Task Terminate Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Task Terminate" event.
+        config SYSVIEW_EVT_TASK_STOP_READY_ENABLE
+            bool "Task Stop Ready State Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Stop Ready State" event.
 
-config SYSVIEW_EVT_IDLE_ENABLE
-    bool "System Idle Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "System Idle" event.
+        config SYSVIEW_EVT_TASK_CREATE_ENABLE
+            bool "Task Create Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Create" event.
 
-config SYSVIEW_EVT_TIMER_ENTER_ENABLE
-    bool "Timer Enter Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Timer Enter" event.
+        config SYSVIEW_EVT_TASK_TERMINATE_ENABLE
+            bool "Task Terminate Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Task Terminate" event.
 
-config SYSVIEW_EVT_TIMER_EXIT_ENABLE
-    bool "Timer Exit Event"
-    depends on SYSVIEW_ENABLE
-    default y
-    help
-        Enables "Timer Exit" event.
-
-endmenu
-
-config ESP32_GCOV_ENABLE
-    bool "GCOV to Host Enable"
-    depends on ESP32_DEBUG_STUBS_ENABLE && ESP32_APPTRACE_ENABLE && !SYSVIEW_ENABLE
-    default y
-    help
-        Enables support for GCOV data transfer to host.
+        config SYSVIEW_EVT_IDLE_ENABLE
+            bool "System Idle Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "System Idle" event.
+
+        config SYSVIEW_EVT_TIMER_ENTER_ENABLE
+            bool "Timer Enter Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Timer Enter" event.
+
+        config SYSVIEW_EVT_TIMER_EXIT_ENABLE
+            bool "Timer Exit Event"
+            depends on SYSVIEW_ENABLE
+            default y
+            help
+                Enables "Timer Exit" event.
+
+    endmenu
+
+    config APPTRACE_GCOV_ENABLE
+        bool "GCOV to Host Enable"
+        depends on APPTRACE_ENABLE && !SYSVIEW_ENABLE
+        select ESP_DEBUG_STUBS_ENABLE
+        default n
+        help
+            Enables support for GCOV data transfer to host.
 
 endmenu

components/app_trace/app_trace.c

@@ -38,7 +38,7 @@
 //                                 |<------------------------------------------->|TRAX_CTRL_REGS|<---->|
 //                                                                               ----------------
 
-// In general tracing goes in the following way. User aplication requests tracing module to send some data by calling esp_apptrace_buffer_get(),
+// In general tracing goes in the following way. User application requests tracing module to send some data by calling esp_apptrace_buffer_get(),
 // module allocates necessary buffer in current input trace block. Then user fills received buffer with data and calls esp_apptrace_buffer_put().
 // When current input trace block is filled with app data it is exposed to host and the second block becomes input one and buffer filling restarts.
 // While target application fills one TRAX block host reads another one via JTAG.
@@ -62,7 +62,7 @@
 //    21..15 bits - trace memory block transfer ID. Block counter. It can overflow. Updated by target, host should not modify it. Actually can be 2 bits;
 //    22     bit  - 'host data present' flag. If set to one there is data from host, otherwise - no host data;
 //    23     bit  - 'host connected' flag. If zero then host is not connected and tracing module works in post-mortem mode, otherwise in streaming mode;
-// - Status register uses TRAX_TRIGGERPC as storage. If this register is not zero then currentlly CPU is changing TRAX registers and
+// - Status register uses TRAX_TRIGGERPC as storage. If this register is not zero then current CPU is changing TRAX registers and
 //   this register holds address of the instruction which application will execute when it finishes with those registers modifications.
 //   See 'Targets Connection' setion for details.
 
@@ -75,11 +75,12 @@
 //    trace data are necessary, e.g. for analyzing crashes. On panic the latest data from current input block are exposed to host and host can read them.
 //    It can happen that system panic occurs when there are very small amount of data which are not exposed to host yet (e.g. crash just after the
 //    TRAX block switch). In this case the previous 16KB of collected data will be dropped and host will see the latest, but very small piece of trace.
-//    It can be insufficient to diagnose the problem. To avoid such situations there is menuconfig option CONFIG_ESP32_APPTRACE_POSTMORTEM_FLUSH_TRAX_THRESH
+//    It can be insufficient to diagnose the problem. To avoid such situations there is menuconfig option
+//    CONFIG_APPTRACE_POSTMORTEM_FLUSH_THRESH
 //    which controls the threshold for flushing data in case of panic.
 //  - Streaming mode. Tracing module enters this mode when host connects to target and sets respective bits in control registers (per core).
 //    In this mode before switching the block tracing module waits for the host to read all the data from the previously exposed block.
-//    On panic tracing module also waits (timeout is configured via menuconfig via CONFIG_ESP32_APPTRACE_ONPANIC_HOST_FLUSH_TMO) for the host to read all data.
+//    On panic tracing module also waits (timeout is configured via menuconfig via CONFIG_APPTRACE_ONPANIC_HOST_FLUSH_TMO) for the host to read all data.
 
 // 4. Communication Protocol
 // =========================
@@ -87,7 +88,7 @@
 // 4.1 Trace Memory Blocks
 // -----------------------
 
-// Communication is controlled via special register. Host periodically polls control register on each core to find out if there are any data avalable.
+// Communication is controlled via special register. Host periodically polls control register on each core to find out if there are any data available.
 // When current input memory block is filled it is exposed to host and 'block_len' and 'block_id' fields are updated in the control register.
 // Host reads new register value and according to it's value starts reading data from exposed block. Meanwhile target starts filling another trace block.
 // When host finishes reading the block it clears 'block_len' field in control register indicating to the target that it is ready to accept the next one.
@@ -102,9 +103,9 @@
 // multithreading environment it can happen that task/ISR which copies data is preempted by another high prio task/ISR. So it is possible situation
 // that task/ISR will fail to complete filling its data chunk before the whole trace block is exposed to the host. To handle such conditions tracing
 // module prepends all user data chunks with header which contains allocated buffer size and actual data length within it. OpenOCD command
-// which reads application traces reports error when it reads incompleted user data block.
-// Data which are transfered from host to target are also prepended with a header. Down channel data header is simple and consists of one two bytes field
-// containing length of host data following the heder.
+// which reads application traces reports error when it reads incomplete user data block.
+// Data which are transffered from host to target are also prepended with a header. Down channel data header is simple and consists of one two bytes field
+// containing length of host data following the header.
 
 // 4.3 Data Buffering
 // ------------------
@@ -113,7 +114,7 @@
 // has not completed reading of the previous one yet. So in this case time critical tracing calls (which can not be delayed for too long time due to
 // the lack of free memory in TRAX block) can be dropped. To avoid such scenarios tracing module implements data buffering. Buffered data will be sent
 // to the host later when TRAX block switch occurs. The maximum size of the buffered data is controlled by menuconfig option
-// CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX.
+// CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX.
 
 // 4.4 Target Connection/Disconnection
 // -----------------------------------
@@ -141,38 +142,37 @@
 //   So no local task switch occurs when mutex is locked. But this does not apply to tasks on another CPU.
 //   WARNING: Priority inversion can happen when low prio task works on one CPU and medium and high prio tasks work on another.
 // WARNING: Care must be taken when selecting timeout values for trace calls from ISRs. Tracing module does not care about watchdogs when waiting
-// on internal locks and for host to complete previous block reading, so if timeout value exceedes watchdog's one it can lead to the system reboot.
+// on internal locks and for host to complete previous block reading, so if timeout value exceeds watchdog's one it can lead to the system reboot.
 
 // 6. Timeouts
 // ===========
 
-// Timeout mechanism is based on xthal_get_ccount() routine and supports timeout values in micorseconds.
+// Timeout mechanism is based on xthal_get_ccount() routine and supports timeout values in microseconds.
 // There are two situations when task/ISR can be delayed by tracing API call. Timeout mechanism takes into account both conditions:
 // - Trace data are locked by another task/ISR. When wating on trace data lock.
 // - Current TRAX memory input block is full when working in streaming mode (host is connected). When waiting for host to complete previous block reading.
 // When wating for any of above conditions xthal_get_ccount() is called periodically to calculate time elapsed from trace API routine entry. When elapsed
 // time exceeds specified timeout value operation is canceled and ESP_ERR_TIMEOUT code is returned.
 
-// ALSO SEE example usage of application tracing module in 'components/app_trace/README.rst'
-
 #include <string.h>
 #include <sys/param.h>
 #include "soc/soc.h"
 #include "soc/dport_reg.h"
+#if CONFIG_IDF_TARGET_ESP32S2BETA
+#include "soc/sensitive_reg.h"
+#endif
 #include "eri.h"
 #include "trax.h"
-#include "soc/timer_group_struct.h"
-#include "soc/timer_group_reg.h"
+#include "soc/timer_periph.h"
 #include "freertos/FreeRTOS.h"
 #include "esp_app_trace.h"
 
-#if CONFIG_ESP32_APPTRACE_ENABLE
+#if CONFIG_APPTRACE_ENABLE
 #define ESP_APPTRACE_MAX_VPRINTF_ARGS           256
 #define ESP_APPTRACE_HOST_BUF_SIZE              256
 
 #define ESP_APPTRACE_PRINT_LOCK                 0
 
-#define LOG_LOCAL_LEVEL CONFIG_LOG_DEFAULT_LEVEL
 #include "esp_log.h"
 const static char *TAG = "esp_apptrace";
 
@@ -205,10 +205,16 @@ const static char *TAG = "esp_apptrace";
 #define ESP_APPTRACE_LOGO( format, ... )  ESP_APPTRACE_LOG_LEV(E, ESP_LOG_NONE, format, ##__VA_ARGS__)
 
 // TODO: move these (and same definitions in trax.c to dport_reg.h)
+#if CONFIG_IDF_TARGET_ESP32
 #define TRACEMEM_MUX_PROBLK0_APPBLK1            0
 #define TRACEMEM_MUX_BLK0_ONLY                  1
 #define TRACEMEM_MUX_BLK1_ONLY                  2
 #define TRACEMEM_MUX_PROBLK1_APPBLK0            3
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#define TRACEMEM_MUX_BLK0_NUM                   19
+#define TRACEMEM_MUX_BLK1_NUM                   20
+#define TRACEMEM_BLK_NUM2ADDR(_n_)              (0x3FFB8000UL + 0x4000UL*((_n_)-4))
+#endif
 
 // TRAX is disabled, so we use its registers for our own purposes
 // | 31..XXXXXX..24 | 23 .(host_connect). 23 | 22 .(host_data). 22| 21..(block_id)..15 | 14..(block_len)..0 |
@@ -233,10 +239,17 @@ const static char *TAG = "esp_apptrace";
 #endif
 #define ESP_APPTRACE_USR_BLOCK_RAW_SZ(_s_)     ((_s_) + sizeof(esp_tracedata_hdr_t))
 
+#if CONFIG_IDF_TARGET_ESP32
 static volatile uint8_t *s_trax_blocks[] = {
     (volatile uint8_t *) 0x3FFFC000,
     (volatile uint8_t *) 0x3FFF8000
 };
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+static volatile uint8_t *s_trax_blocks[] = {
+    (volatile uint8_t *)TRACEMEM_BLK_NUM2ADDR(TRACEMEM_MUX_BLK0_NUM),
+    (volatile uint8_t *)TRACEMEM_BLK_NUM2ADDR(TRACEMEM_MUX_BLK1_NUM)
+};
+#endif
 
 #define ESP_APPTRACE_TRAX_BLOCKS_NUM            (sizeof(s_trax_blocks)/sizeof(s_trax_blocks[0]))
 
@@ -296,17 +309,17 @@ typedef struct {
 typedef struct {
     volatile esp_apptrace_trax_state_t  state;                                  // state
     esp_apptrace_mem_block_t            blocks[ESP_APPTRACE_TRAX_BLOCKS_NUM];   // memory blocks
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
     // ring buffer control struct for pending user blocks
     esp_apptrace_rb_t                   rb_pend;
     // storage for pending user blocks
-    uint8_t                             pending_data[CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX + 1];
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+    uint8_t                             pending_data[CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX + 1];
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
     // ring buffer control struct for pending user data chunks sizes,
     // every chunk contains whole number of user blocks and fit into TRAX memory block
     esp_apptrace_rb_t                   rb_pend_chunk_sz;
     // storage for above ring buffer data
-    uint16_t                            pending_chunk_sz[CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX/ESP_APPTRACE_TRAX_BLOCK_SIZE + 2];
+    uint16_t                            pending_chunk_sz[CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX/ESP_APPTRACE_TRAX_BLOCK_SIZE + 2];
     // current (accumulated) pending user data chunk size
     uint16_t                            cur_pending_chunk_sz;
 #endif
@@ -363,7 +376,7 @@ static esp_apptrace_hw_t s_trace_hw[ESP_APPTRACE_HW_MAX] = {
     }
 };
 
-static inline int esp_apptrace_log_lock()
+static inline int esp_apptrace_log_lock(void)
 {
 #if ESP_APPTRACE_PRINT_LOCK
     esp_apptrace_tmo_t tmo;
@@ -375,29 +388,29 @@ static inline int esp_apptrace_log_lock()
 #endif
 }
 
-static inline void esp_apptrace_log_unlock()
+static inline void esp_apptrace_log_unlock(void)
 {
  #if ESP_APPTRACE_PRINT_LOCK
     esp_apptrace_lock_give(&s_log_lock);
 #endif
 }
 
-static inline esp_err_t esp_apptrace_lock_initialize()
+static inline esp_err_t esp_apptrace_lock_initialize(esp_apptrace_lock_t *lock)
 {
-#if CONFIG_ESP32_APPTRACE_LOCK_ENABLE
-    esp_apptrace_lock_init(&s_trace_buf.lock);
+#if CONFIG_APPTRACE_LOCK_ENABLE
+    esp_apptrace_lock_init(lock);
 #endif
     return ESP_OK;
 }
 
-static inline esp_err_t esp_apptrace_lock_cleanup()
+static inline esp_err_t esp_apptrace_lock_cleanup(void)
 {
     return ESP_OK;
 }
 
 esp_err_t esp_apptrace_lock(esp_apptrace_tmo_t *tmo)
 {
-#if CONFIG_ESP32_APPTRACE_LOCK_ENABLE
+#if CONFIG_APPTRACE_LOCK_ENABLE
     esp_err_t ret = esp_apptrace_lock_take(&s_trace_buf.lock, tmo);
     if (ret != ESP_OK) {
         return ESP_FAIL;
@@ -406,17 +419,28 @@ esp_err_t esp_apptrace_lock(esp_apptrace_tmo_t *tmo)
     return ESP_OK;
 }
 
-esp_err_t esp_apptrace_unlock()
+esp_err_t esp_apptrace_unlock(void)
 {
     esp_err_t ret = ESP_OK;
-#if CONFIG_ESP32_APPTRACE_LOCK_ENABLE
+#if CONFIG_APPTRACE_LOCK_ENABLE
     ret = esp_apptrace_lock_give(&s_trace_buf.lock);
 #endif
     return ret;
 }
 
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
-static void esp_apptrace_trax_init()
+#if CONFIG_APPTRACE_DEST_TRAX
+
+static inline void esp_apptrace_trax_select_memory_block(int block_num)
+{
+    // select memory block to be exposed to the TRAX module (accessed by host)
+#if CONFIG_IDF_TARGET_ESP32
+    DPORT_WRITE_PERI_REG(DPORT_TRACEMEM_MUX_MODE_REG, block_num ? TRACEMEM_MUX_BLK0_ONLY : TRACEMEM_MUX_BLK1_ONLY);
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+    DPORT_WRITE_PERI_REG(DPORT_PMS_OCCUPY_3_REG, block_num ? BIT(TRACEMEM_MUX_BLK0_NUM-4) : BIT(TRACEMEM_MUX_BLK1_NUM-4));
+#endif
+}
+
+static void esp_apptrace_trax_init(void)
 {
     // Stop trace, if any (on the current CPU)
     eri_write(ERI_TRAX_TRAXCTRL, TRAXCTRL_TRSTP);
@@ -429,7 +453,7 @@ static void esp_apptrace_trax_init()
     ESP_APPTRACE_LOGI("Initialized TRAX on CPU%d", xPortGetCoreID());
 }
 
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
 // keep the size of buffered data for copying to TRAX mem block.
 // Only whole user blocks should be copied from buffer to TRAX block upon the switch
 static void esp_apptrace_trax_pend_chunk_sz_update(uint16_t size)
@@ -452,7 +476,7 @@ static void esp_apptrace_trax_pend_chunk_sz_update(uint16_t size)
     }
 }
 
-static uint16_t esp_apptrace_trax_pend_chunk_sz_get()
+static uint16_t esp_apptrace_trax_pend_chunk_sz_get(void)
 {
     uint16_t ch_sz;
     ESP_APPTRACE_LOGD("Get chunk enter %d w-r-s %d-%d-%d", s_trace_buf.trax.cur_pending_chunk_sz,
@@ -470,7 +494,7 @@ static uint16_t esp_apptrace_trax_pend_chunk_sz_get()
 #endif
 
 // assumed to be protected by caller from multi-core/thread access
-static esp_err_t esp_apptrace_trax_block_switch()
+static esp_err_t esp_apptrace_trax_block_switch(void)
 {
     int prev_block_num = s_trace_buf.trax.state.in_block % 2;
     int new_block_num = prev_block_num ? (0) : (1);
@@ -502,7 +526,7 @@ static esp_err_t esp_apptrace_trax_block_switch()
     // switch to new block
     s_trace_buf.trax.state.in_block++;
 
-    DPORT_WRITE_PERI_REG(DPORT_TRACEMEM_MUX_MODE_REG, new_block_num ? TRACEMEM_MUX_BLK0_ONLY : TRACEMEM_MUX_BLK1_ONLY);
+    esp_apptrace_trax_select_memory_block(new_block_num);
     // handle data from host
     esp_hostdata_hdr_t *hdr = (esp_hostdata_hdr_t *)s_trace_buf.trax.blocks[new_block_num].start;
     if (ctrl_reg & ESP_APPTRACE_TRAX_HOST_DATA && hdr->block_sz > 0) {
@@ -520,9 +544,9 @@ static esp_err_t esp_apptrace_trax_block_switch()
         }
         hdr->block_sz = 0;
     }
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
     // copy pending data to TRAX block if any
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
     uint16_t max_chunk_sz = esp_apptrace_trax_pend_chunk_sz_get();
 #else
     uint16_t max_chunk_sz = s_trace_buf.trax.blocks[new_block_num].sz;
@@ -530,7 +554,7 @@ static esp_err_t esp_apptrace_trax_block_switch()
     while (s_trace_buf.trax.state.markers[new_block_num] < max_chunk_sz) {
         uint32_t read_sz = esp_apptrace_rb_read_size_get(&s_trace_buf.trax.rb_pend);
         if (read_sz == 0) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
             /* theres is a bug: esp_apptrace_trax_pend_chunk_sz_get returned wrong value,
                it must be greater or equal to one returned by esp_apptrace_rb_read_size_get */
             ESP_APPTRACE_LOGE("No pended bytes, must be > 0 and <= %d!", max_chunk_sz);
@@ -673,7 +697,7 @@ static inline uint8_t *esp_apptrace_trax_wait4buf(uint16_t size, esp_apptrace_tm
         return NULL;
     }
     // check if we still have pending data
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
     if (esp_apptrace_rb_read_size_get(&s_trace_buf.trax.rb_pend) > 0) {
         // if after TRAX block switch still have pending data (not all pending data have been pumped to TRAX block)
         // alloc new pending buffer
@@ -687,7 +711,7 @@ static inline uint8_t *esp_apptrace_trax_wait4buf(uint16_t size, esp_apptrace_tm
     {
         // update block pointers
         if (ESP_APPTRACE_TRAX_INBLOCK_MARKER() + size > ESP_APPTRACE_TRAX_INBLOCK_GET()->sz) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
             *pended = 1;
             ptr = esp_apptrace_rb_produce(&s_trace_buf.trax.rb_pend, size);
             if (ptr == NULL) {
@@ -717,7 +741,7 @@ static uint8_t *esp_apptrace_trax_get_buffer(uint32_t size, esp_apptrace_tmo_t *
         return NULL;
     }
     // check for data in the pending buffer
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
     if (esp_apptrace_rb_read_size_get(&s_trace_buf.trax.rb_pend) > 0) {
         // if we have buffered data try to switch TRAX block
         esp_apptrace_trax_block_switch();
@@ -732,7 +756,7 @@ static uint8_t *esp_apptrace_trax_get_buffer(uint32_t size, esp_apptrace_tmo_t *
             buf_ptr = esp_apptrace_trax_wait4buf(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size), tmo, &pended_buf);
             if (buf_ptr) {
                 if (pended_buf) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
                     esp_apptrace_trax_pend_chunk_sz_update(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
 #endif
                 } else {
@@ -742,18 +766,18 @@ static uint8_t *esp_apptrace_trax_get_buffer(uint32_t size, esp_apptrace_tmo_t *
                 }
             }
         } else {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
             esp_apptrace_trax_pend_chunk_sz_update(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
 #endif
         }
     } else
 #endif
     if (ESP_APPTRACE_TRAX_INBLOCK_MARKER() + ESP_APPTRACE_USR_BLOCK_RAW_SZ(size) > ESP_APPTRACE_TRAX_INBLOCK_GET()->sz) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
         ESP_APPTRACE_LOGD("TRAX full. Get %d bytes from PEND buffer", size);
         buf_ptr = esp_apptrace_rb_produce(&s_trace_buf.trax.rb_pend, ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
         if (buf_ptr) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
             esp_apptrace_trax_pend_chunk_sz_update(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
 #endif
         }
@@ -764,7 +788,7 @@ static uint8_t *esp_apptrace_trax_get_buffer(uint32_t size, esp_apptrace_tmo_t *
             buf_ptr = esp_apptrace_trax_wait4buf(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size), tmo, &pended_buf);
             if (buf_ptr) {
                 if (pended_buf) {
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
                     esp_apptrace_trax_pend_chunk_sz_update(ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
 #endif
                 } else {
@@ -848,7 +872,7 @@ static esp_err_t esp_apptrace_trax_status_reg_get(uint32_t *val)
     return ESP_OK;
 }
 
-static esp_err_t esp_apptrace_trax_dest_init()
+static esp_err_t esp_apptrace_trax_dest_init(void)
 {
     for (int i = 0; i < ESP_APPTRACE_TRAX_BLOCKS_NUM; i++) {
         s_trace_buf.trax.blocks[i].start = (uint8_t *)s_trax_blocks[i];
@@ -856,28 +880,29 @@ static esp_err_t esp_apptrace_trax_dest_init()
         s_trace_buf.trax.state.markers[i] = 0;
     }
     s_trace_buf.trax.state.in_block = ESP_APPTRACE_TRAX_INBLOCK_START;
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > 0
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
     esp_apptrace_rb_init(&s_trace_buf.trax.rb_pend, s_trace_buf.trax.pending_data,
                         sizeof(s_trace_buf.trax.pending_data));
-#if CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
+#if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > ESP_APPTRACE_TRAX_BLOCK_SIZE
     s_trace_buf.trax.cur_pending_chunk_sz = 0;
     esp_apptrace_rb_init(&s_trace_buf.trax.rb_pend_chunk_sz, (uint8_t *)s_trace_buf.trax.pending_chunk_sz,
                         sizeof(s_trace_buf.trax.pending_chunk_sz));
 #endif
 #endif
 
+#if CONFIG_IDF_TARGET_ESP32
     DPORT_WRITE_PERI_REG(DPORT_PRO_TRACEMEM_ENA_REG, DPORT_PRO_TRACEMEM_ENA_M);
 #if CONFIG_FREERTOS_UNICORE == 0
     DPORT_WRITE_PERI_REG(DPORT_APP_TRACEMEM_ENA_REG, DPORT_APP_TRACEMEM_ENA_M);
 #endif
-    // Expose block 1 to host, block 0 is current trace input buffer
-    DPORT_WRITE_PERI_REG(DPORT_TRACEMEM_MUX_MODE_REG, TRACEMEM_MUX_BLK1_ONLY);
+#endif
+    esp_apptrace_trax_select_memory_block(0);
 
     return ESP_OK;
 }
 #endif
 
-esp_err_t esp_apptrace_init()
+esp_err_t esp_apptrace_init(void)
 {
     int res;
 
@@ -890,7 +915,7 @@ esp_err_t esp_apptrace_init()
             ESP_APPTRACE_LOGE("Failed to init log lock (%d)!", res);
             return res;
         }
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         res = esp_apptrace_trax_dest_init();
         if (res != ESP_OK) {
             ESP_APPTRACE_LOGE("Failed to init TRAX dest data (%d)!", res);
@@ -900,7 +925,7 @@ esp_err_t esp_apptrace_init()
 #endif
     }
 
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
     // init TRAX on this CPU
     esp_apptrace_trax_init();
 #endif
@@ -922,7 +947,7 @@ esp_err_t esp_apptrace_read(esp_apptrace_dest_t dest, void *buf, uint32_t *size,
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -932,6 +957,9 @@ esp_err_t esp_apptrace_read(esp_apptrace_dest_t dest, void *buf, uint32_t *size,
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return ESP_ERR_NOT_SUPPORTED;
     }
+    if (buf == NULL || size == NULL || *size == 0) {
+        return ESP_ERR_INVALID_ARG;
+    }
 
     //TODO: callback system
     esp_apptrace_tmo_init(&tmo, user_tmo);
@@ -956,7 +984,7 @@ uint8_t *esp_apptrace_down_buffer_get(esp_apptrace_dest_t dest, uint32_t *size,
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -966,8 +994,10 @@ uint8_t *esp_apptrace_down_buffer_get(esp_apptrace_dest_t dest, uint32_t *size,
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return NULL;
     }
+    if (size == NULL || *size == 0) {
+        return NULL;
+    }
 
-    // ESP_APPTRACE_LOGE("esp_apptrace_down_buffer_get %d", *size);
     esp_apptrace_tmo_init(&tmo, user_tmo);
     return hw->get_down_buffer(size, &tmo);
 }
@@ -978,7 +1008,7 @@ esp_err_t esp_apptrace_down_buffer_put(esp_apptrace_dest_t dest, uint8_t *ptr, u
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -988,6 +1018,9 @@ esp_err_t esp_apptrace_down_buffer_put(esp_apptrace_dest_t dest, uint8_t *ptr, u
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return ESP_ERR_NOT_SUPPORTED;
     }
+    if (ptr == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
     return hw->put_down_buffer(ptr, &tmo);
@@ -1000,7 +1033,7 @@ esp_err_t esp_apptrace_write(esp_apptrace_dest_t dest, const void *data, uint32_
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1010,6 +1043,9 @@ esp_err_t esp_apptrace_write(esp_apptrace_dest_t dest, const void *data, uint32_
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return ESP_ERR_NOT_SUPPORTED;
     }
+    if (data == NULL || size == 0) {
+        return ESP_ERR_INVALID_ARG;
+    }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
     ptr = hw->get_up_buffer(size, &tmo);
@@ -1033,7 +1069,7 @@ int esp_apptrace_vprintf_to(esp_apptrace_dest_t dest, uint32_t user_tmo, const c
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1043,6 +1079,9 @@ int esp_apptrace_vprintf_to(esp_apptrace_dest_t dest, uint32_t user_tmo, const c
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return ESP_ERR_NOT_SUPPORTED;
     }
+    if (fmt == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
     ESP_APPTRACE_LOGD("fmt %x", fmt);
@@ -1094,7 +1133,7 @@ uint8_t *esp_apptrace_buffer_get(esp_apptrace_dest_t dest, uint32_t size, uint32
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1104,6 +1143,9 @@ uint8_t *esp_apptrace_buffer_get(esp_apptrace_dest_t dest, uint32_t size, uint32
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return NULL;
     }
+    if (size == 0) {
+        return NULL;
+    }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
     return hw->get_up_buffer(size, &tmo);
@@ -1115,7 +1157,7 @@ esp_err_t esp_apptrace_buffer_put(esp_apptrace_dest_t dest, uint8_t *ptr, uint32
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1125,6 +1167,9 @@ esp_err_t esp_apptrace_buffer_put(esp_apptrace_dest_t dest, uint8_t *ptr, uint32
         ESP_APPTRACE_LOGE("Trace destinations other then TRAX are not supported yet!");
         return ESP_ERR_NOT_SUPPORTED;
     }
+    if (ptr == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
     return hw->put_up_buffer(ptr, &tmo);
@@ -1136,7 +1181,7 @@ esp_err_t esp_apptrace_flush_nolock(esp_apptrace_dest_t dest, uint32_t min_sz, u
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1180,7 +1225,7 @@ bool esp_apptrace_host_is_connected(esp_apptrace_dest_t dest)
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1198,7 +1243,7 @@ esp_err_t esp_apptrace_status_reg_set(esp_apptrace_dest_t dest, uint32_t val)
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");
@@ -1216,7 +1261,7 @@ esp_err_t esp_apptrace_status_reg_get(esp_apptrace_dest_t dest, uint32_t *val)
     esp_apptrace_hw_t *hw = NULL;
 
     if (dest == ESP_APPTRACE_DEST_TRAX) {
-#if CONFIG_ESP32_APPTRACE_DEST_TRAX
+#if CONFIG_APPTRACE_DEST_TRAX
         hw = ESP_APPTRACE_HW(ESP_APPTRACE_HW_TRAX);
 #else
         ESP_APPTRACE_LOGE("Application tracing via TRAX is disabled in menuconfig!");

components/app_trace/app_trace_util.c

@@ -15,7 +15,12 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_app_trace_util.h"
-#include "esp_clk.h"
+#include "sdkconfig.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/clk.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/clk.h"
+#endif
 
 ///////////////////////////////////////////////////////////////////////////////
 ///////////////////////////////// TIMEOUT /////////////////////////////////////

components/app_trace/component.mk

@@ -23,7 +23,10 @@ COMPONENT_SRCDIRS += \
 	sys_view/SEGGER \
 	sys_view/Sample/OS \
 	sys_view/Sample/Config \
-	sys_view/esp32
+	sys_view/esp32 \
+	sys_view/ext
 else
 COMPONENT_SRCDIRS += gcov
 endif
+
+COMPONENT_ADD_LDFRAGMENTS += linker.lf

components/app_trace/gcov/gcov_rtio.c

@@ -14,16 +14,23 @@
 
 // This module implements runtime file I/O API for GCOV.
 
+#include <string.h>
 #include "esp_task_wdt.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
+#include "freertos/semphr.h"
 #include "soc/cpu.h"
-#include "soc/timer_group_struct.h"
-#include "soc/timer_group_reg.h"
+#include "soc/timer_periph.h"
 #include "esp_app_trace.h"
-#include "esp_dbg_stubs.h"
+#include "esp_private/dbg_stubs.h"
+#include "hal/timer_ll.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/libc_stubs.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/libc_stubs.h"
+#endif
 
-#if CONFIG_ESP32_GCOV_ENABLE
+#if CONFIG_APPTRACE_GCOV_ENABLE
 
 #define ESP_GCOV_DOWN_BUF_SIZE  4200
 
@@ -31,37 +38,37 @@
 #include "esp_log.h"
 const static char *TAG = "esp_gcov_rtio";
 
-#if GCC_NOT_5_2_0
-void __gcov_dump(void);
-void __gcov_reset(void);
-#else
-/* The next code for old GCC */
+extern void __gcov_dump(void);
+extern void __gcov_reset(void);
 
-static void (*s_gcov_exit)(void);
-/* Root of a program/shared-object state */
-struct gcov_root
+static struct syscall_stub_table s_gcov_stub_table;
+
+
+static int gcov_stub_lock_try_acquire_recursive(_lock_t *lock)
 {
-  void *list;
-  unsigned dumped : 1;  /* counts have been dumped.  */
-  unsigned run_counted : 1;  /* run has been accounted for.  */
-  struct gcov_root *next;
-  struct gcov_root *prev;
-};
-
-/* Per-dynamic-object gcov state.  */
-extern struct gcov_root __gcov_root;
-
-static void esp_gcov_reset_status(void)
-{
-  __gcov_root.dumped = 0;
-  __gcov_root.run_counted = 0;
+    if (*lock && uxSemaphoreGetCount((xSemaphoreHandle)(*lock)) == 0) {
+        // we can do nothing here, gcov dump is initiated with some resource locked
+        // which is also used by gcov functions
+        ESP_EARLY_LOGE(TAG, "Lock 0x%x is busy during GCOV dump! System state can be inconsistent after dump!", lock);
+    }
+    return pdTRUE;
 }
-#endif
 
+static void gcov_stub_lock_acquire_recursive(_lock_t *lock)
+{
+    gcov_stub_lock_try_acquire_recursive(lock);
+}
+
+static void gcov_stub_lock_release_recursive(_lock_t *lock)
+{
+}
 
 static int esp_dbg_stub_gcov_dump_do(void)
 {
     int ret = ESP_OK;
+    FILE* old_stderr = stderr;
+    FILE* old_stdout = stdout;
+    struct syscall_stub_table* old_table = syscall_table_ptr_pro;
 
     ESP_EARLY_LOGV(TAG, "Alloc apptrace down buf %d bytes", ESP_GCOV_DOWN_BUF_SIZE);
     void *down_buf = malloc(ESP_GCOV_DOWN_BUF_SIZE);
@@ -72,18 +79,22 @@ static int esp_dbg_stub_gcov_dump_do(void)
     ESP_EARLY_LOGV(TAG, "Config apptrace down buf");
     esp_apptrace_down_buffer_config(down_buf, ESP_GCOV_DOWN_BUF_SIZE);
     ESP_EARLY_LOGV(TAG, "Dump data...");
-#if GCC_NOT_5_2_0
+    // incase of dual-core chip APP and PRO CPUs share the same table, so it is safe to save only PRO's table
+    memcpy(&s_gcov_stub_table, old_table, sizeof(s_gcov_stub_table));
+    s_gcov_stub_table._lock_acquire_recursive = &gcov_stub_lock_acquire_recursive;
+    s_gcov_stub_table._lock_release_recursive = &gcov_stub_lock_release_recursive;
+    s_gcov_stub_table._lock_try_acquire_recursive = &gcov_stub_lock_try_acquire_recursive,
+
+    syscall_table_ptr_pro = &s_gcov_stub_table;
+    stderr = (FILE*) &__sf_fake_stderr;
+    stdout = (FILE*) &__sf_fake_stdout;
     __gcov_dump();
     // reset dump status to allow incremental data accumulation
     __gcov_reset();
-#else
-    ESP_EARLY_LOGV(TAG, "Check for dump handler %p", s_gcov_exit);
-    if (s_gcov_exit) {
-        s_gcov_exit();
-        // reset dump status to allow incremental data accumulation
-        esp_gcov_reset_status();
-    }
-#endif
+    stdout = old_stdout;
+    stderr = old_stderr;
+    syscall_table_ptr_pro = old_table;
+
     ESP_EARLY_LOGV(TAG, "Free apptrace down buf");
     free(down_buf);
     ESP_EARLY_LOGV(TAG, "Finish file transfer session");
@@ -103,19 +114,17 @@ static int esp_dbg_stub_gcov_dump_do(void)
  */
 static int esp_dbg_stub_gcov_entry(void)
 {
-#if GCC_NOT_5_2_0
     return esp_dbg_stub_gcov_dump_do();
-#else
-    int ret = ESP_OK;
-    // disable IRQs on this CPU, other CPU is halted by OpenOCD
-    unsigned irq_state = portENTER_CRITICAL_NESTED();
-    ret = esp_dbg_stub_gcov_dump_do();
-    portEXIT_CRITICAL_NESTED(irq_state);
-    return ret;
-#endif
 }
 
-void esp_gcov_dump()
+int gcov_rtio_atexit(void (*function)(void) __attribute__ ((unused)))
+{
+    ESP_EARLY_LOGV(TAG, "%s", __FUNCTION__);
+    esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_GCOV, (uint32_t)&esp_dbg_stub_gcov_entry);
+    return 0;
+}
+
+void esp_gcov_dump(void)
 {
     // disable IRQs on this CPU, other CPU is halted by OpenOCD
     unsigned irq_state = portENTER_CRITICAL_NESTED();
@@ -125,13 +134,13 @@ void esp_gcov_dump()
 #endif
     while (!esp_apptrace_host_is_connected(ESP_APPTRACE_DEST_TRAX)) {
         // to avoid complains that task watchdog got triggered for other tasks
-        TIMERG0.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
-        TIMERG0.wdt_feed=1;
-        TIMERG0.wdt_wprotect=0;
+        timer_ll_wdt_set_protect(&TIMERG0, false);
+        timer_ll_wdt_feed(&TIMERG0);
+        timer_ll_wdt_set_protect(&TIMERG0, true);
         // to avoid reboot on INT_WDT
-        TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
-        TIMERG1.wdt_feed=1;
-        TIMERG1.wdt_wprotect=0;
+        timer_ll_wdt_set_protect(&TIMERG1, false);
+        timer_ll_wdt_feed(&TIMERG1);
+        timer_ll_wdt_set_protect(&TIMERG1, true);
     }
 
     esp_dbg_stub_gcov_dump_do();
@@ -141,18 +150,6 @@ void esp_gcov_dump()
     portEXIT_CRITICAL_NESTED(irq_state);
 }
 
-int gcov_rtio_atexit(void (*function)(void) __attribute__ ((unused)))
-{
-#if GCC_NOT_5_2_0
-    ESP_EARLY_LOGV(TAG, "%s", __FUNCTION__);
-#else
-    ESP_EARLY_LOGV(TAG, "%s %p", __FUNCTION__, function);
-    s_gcov_exit = function;
-#endif
-    esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_GCOV, (uint32_t)&esp_dbg_stub_gcov_entry);
-    return 0;
-}
-
 void *gcov_rtio_fopen(const char *path, const char *mode)
 {
     ESP_EARLY_LOGV(TAG, "%s '%s' '%s'", __FUNCTION__, path, mode);

components/app_trace/heap_trace_tohost.c

@@ -0,0 +1,114 @@
+// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <sdkconfig.h>
+
+#define HEAP_TRACE_SRCFILE /* don't warn on inclusion here */
+#include "esp_heap_trace.h"
+#undef HEAP_TRACE_SRCFILE
+
+#if CONFIG_SYSVIEW_ENABLE
+#include "esp_app_trace.h"
+#include "esp_sysview_trace.h"
+#endif
+
+#define STACK_DEPTH CONFIG_HEAP_TRACING_STACK_DEPTH
+
+#ifdef CONFIG_HEAP_TRACING_TOHOST
+
+#if !CONFIG_SYSVIEW_ENABLE
+#error None of the heap tracing backends is enabled! You must enable SystemView compatible tracing to use this feature.
+#endif
+
+static bool s_tracing;
+
+esp_err_t heap_trace_init_tohost(void)
+{
+    if (s_tracing) {
+        return ESP_ERR_INVALID_STATE;
+    }
+    return ESP_OK;
+}
+
+esp_err_t heap_trace_start(heap_trace_mode_t mode_param)
+{
+#if CONFIG_SYSVIEW_ENABLE
+    esp_err_t ret = esp_sysview_heap_trace_start((uint32_t)-1);
+    if (ret != ESP_OK) {
+        return ret;
+    }
+#endif
+    s_tracing = true;
+    return ESP_OK;
+}
+
+esp_err_t heap_trace_stop(void)
+{
+    esp_err_t ret = ESP_ERR_NOT_SUPPORTED;
+#if CONFIG_SYSVIEW_ENABLE
+    ret = esp_sysview_heap_trace_stop();
+#endif
+    s_tracing = false;
+    return ret;
+}
+
+esp_err_t heap_trace_resume(void)
+{
+    return heap_trace_start(HEAP_TRACE_ALL);
+}
+
+size_t heap_trace_get_count(void)
+{
+    return 0;
+}
+
+esp_err_t heap_trace_get(size_t index, heap_trace_record_t *record)
+{
+    return ESP_ERR_NOT_SUPPORTED;
+}
+
+void heap_trace_dump(void)
+{
+    return;
+}
+
+/* Add a new allocation to the heap trace records */
+static IRAM_ATTR void record_allocation(const heap_trace_record_t *record)
+{
+    if (!s_tracing) {
+        return;
+    }
+#if CONFIG_SYSVIEW_ENABLE
+    esp_sysview_heap_trace_alloc(record->address, record->size, record->alloced_by);
+#endif
+}
+
+/* record a free event in the heap trace log
+
+   For HEAP_TRACE_ALL, this means filling in the freed_by pointer.
+   For HEAP_TRACE_LEAKS, this means removing the record from the log.
+*/
+static IRAM_ATTR void record_free(void *p, void **callers)
+{
+    if (!s_tracing) {
+        return;
+    }
+#if CONFIG_SYSVIEW_ENABLE
+    esp_sysview_heap_trace_free(p, callers);
+#endif
+}
+
+#include "heap_trace.inc"
+
+#endif /*CONFIG_HEAP_TRACING_TOHOST*/
+

components/app_trace/host_file_io.c

@@ -25,7 +25,7 @@
 #include <string.h>
 #include "esp_app_trace.h"
 
-#if CONFIG_ESP32_APPTRACE_ENABLE
+#if CONFIG_APPTRACE_ENABLE
 
 #define LOG_LOCAL_LEVEL CONFIG_LOG_DEFAULT_LEVEL
 #include "esp_log.h"
@@ -145,6 +145,9 @@ void *esp_apptrace_fopen(esp_apptrace_dest_t dest, const char *path, const char
     esp_apptrace_fopen_args_t cmd_args;
 
     ESP_EARLY_LOGV(TAG, "esp_apptrace_fopen '%s' '%s'", path, mode);
+    if (path == NULL || mode == NULL) {
+        return 0;        
+    }
 
     cmd_args.path = path;
     cmd_args.path_len = strlen(path) + 1;
@@ -213,6 +216,10 @@ size_t esp_apptrace_fwrite(esp_apptrace_dest_t dest, const void *ptr, size_t siz
 
     ESP_EARLY_LOGV(TAG, "esp_apptrace_fwrite f %p l %d", stream, size*nmemb);
 
+    if (ptr == NULL) {
+        return 0;        
+    }
+
     cmd_args.buf = (void *)ptr;
     cmd_args.size = size * nmemb;
     cmd_args.file = stream;
@@ -248,6 +255,10 @@ size_t esp_apptrace_fread(esp_apptrace_dest_t dest, void *ptr, size_t size, size
 
     ESP_EARLY_LOGV(TAG, "esp_apptrace_fread f %p l %d", stream, size*nmemb);
 
+    if (ptr == NULL) {
+        return 0;        
+    }
+
     cmd_args.size = size * nmemb;
     cmd_args.file = stream;
     esp_err_t ret = esp_apptrace_file_cmd_send(dest, ESP_APPTRACE_FILE_CMD_FREAD, esp_apptrace_fread_args_prepare,

components/app_trace/include/esp_app_trace.h

@@ -18,6 +18,10 @@
 #include "esp_err.h"
 #include "esp_app_trace_util.h" // ESP_APPTRACE_TMO_INFINITE
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /**
  * Application trace data destinations bits.
  */
@@ -33,7 +37,7 @@ typedef enum {
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
-esp_err_t esp_apptrace_init();
+esp_err_t esp_apptrace_init(void);
 
 /**
  * @brief Configures down buffer.
@@ -51,7 +55,7 @@ void esp_apptrace_down_buffer_config(uint8_t *buf, uint32_t size);
  *
  * @param dest Indicates HW interface to send data.
  * @param size Size of data to write to trace buffer.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return non-NULL on success, otherwise NULL.
  */
@@ -63,7 +67,7 @@ uint8_t *esp_apptrace_buffer_get(esp_apptrace_dest_t dest, uint32_t size, uint32
  *
  * @param dest Indicates HW interface to send data. Should be identical to the same parameter in call to esp_apptrace_buffer_get.
  * @param ptr  Address of trace buffer to release. Should be the value returned by call to esp_apptrace_buffer_get.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
@@ -75,7 +79,7 @@ esp_err_t esp_apptrace_buffer_put(esp_apptrace_dest_t dest, uint8_t *ptr, uint32
  * @param dest Indicates HW interface to send data.
  * @param data Address of data to write to trace buffer.
  * @param size Size of data to write to trace buffer.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
@@ -85,7 +89,7 @@ esp_err_t esp_apptrace_write(esp_apptrace_dest_t dest, const void *data, uint32_
  * @brief vprintf-like function to sent log messages to host via specified HW interface.
  *
  * @param dest Indicates HW interface to send data.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  * @param fmt  Address of format string.
  * @param ap   List of arguments.
  *
@@ -107,7 +111,7 @@ int esp_apptrace_vprintf(const char *fmt, va_list ap);
  * @brief Flushes remaining data in trace buffer to host.
  *
  * @param dest Indicates HW interface to flush data on.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
@@ -119,7 +123,7 @@ esp_err_t esp_apptrace_flush(esp_apptrace_dest_t dest, uint32_t tmo);
  *
  * @param dest   Indicates HW interface to flush data on.
  * @param min_sz Threshold for flushing data. If current filling level is above this value, data will be flushed. TRAX destinations only.
- * @param tmo    Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo    Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
@@ -131,31 +135,31 @@ esp_err_t esp_apptrace_flush_nolock(esp_apptrace_dest_t dest, uint32_t min_sz, u
  * @param dest Indicates HW interface to read the data on.
  * @param data Address of buffer to put data from trace buffer.
  * @param size Pointer to store size of read data. Before call to this function pointed memory must hold requested size of data
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
 esp_err_t esp_apptrace_read(esp_apptrace_dest_t dest, void *data, uint32_t *size, uint32_t tmo);
 
 /**
- * @brief Rertrieves incoming data buffer if any.
+ * @brief Retrieves incoming data buffer if any.
  *        After data in buffer are processed esp_apptrace_down_buffer_put must be called to indicate it.
  *
  * @param dest Indicates HW interface to receive data.
- * @param size Address to store size of available data in down buffer. Must be initializaed with requested value.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param size Address to store size of available data in down buffer. Must be initialized with requested value.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return non-NULL on success, otherwise NULL.
  */
 uint8_t *esp_apptrace_down_buffer_get(esp_apptrace_dest_t dest, uint32_t *size, uint32_t tmo);
 
 /**
- * @brief Indicates that the data in down buffer are processesd.
+ * @brief Indicates that the data in down buffer are processed.
  *        This function is a counterpart of and must be preceeded by esp_apptrace_down_buffer_get.
  *
  * @param dest Indicates HW interface to receive data. Should be identical to the same parameter in call to esp_apptrace_down_buffer_get.
  * @param ptr  Address of trace buffer to release. Should be the value returned by call to esp_apptrace_down_buffer_get.
- * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinitely.
  *
  * @return ESP_OK on success, otherwise see esp_err_t
  */
@@ -247,7 +251,7 @@ int esp_apptrace_ftell(esp_apptrace_dest_t dest, void *stream);
 
 /**
  * @brief Indicates to the host that all file operations are completed.
- *		  This function should be called after all file operations are finished and 
+ *		  This function should be called after all file operations are finished and
  *		  indicate to the host that it can perform cleanup operations (close open files etc.).
  *
  * @param dest   Indicates HW interface to use.
@@ -262,4 +266,8 @@ int esp_apptrace_fstop(esp_apptrace_dest_t dest);
  */
 void esp_gcov_dump(void);
 
+#ifdef __cplusplus
+}
+#endif
+
 #endif

components/app_trace/include/esp_app_trace_util.h

@@ -14,6 +14,10 @@
 #ifndef ESP_APP_TRACE_UTIL_H_
 #define ESP_APP_TRACE_UTIL_H_
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #include "freertos/FreeRTOS.h"
 #include "esp_err.h"
 
@@ -164,4 +168,8 @@ uint32_t esp_apptrace_rb_read_size_get(esp_apptrace_rb_t *rb);
  */
 uint32_t esp_apptrace_rb_write_size_get(esp_apptrace_rb_t *rb);
 
+#ifdef __cplusplus
+}
+#endif
+
 #endif //ESP_APP_TRACE_UTIL_H_

components/app_trace/include/esp_sysview_trace.h

@@ -0,0 +1,88 @@
+// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef ESP_SYSVIEW_TRACE_H_
+#define ESP_SYSVIEW_TRACE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdarg.h>
+#include "esp_err.h"
+#include "SEGGER_RTT.h" // SEGGER_RTT_ESP32_Flush
+#include "esp_app_trace_util.h" // ESP_APPTRACE_TMO_INFINITE
+
+/**
+ * @brief Flushes remaining data in SystemView trace buffer to host.
+ *
+ * @param tmo  Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+ *
+ * @return ESP_OK.
+ */
+static inline esp_err_t esp_sysview_flush(uint32_t tmo)
+{
+    SEGGER_RTT_ESP32_Flush(0, tmo);
+    return ESP_OK;
+}
+
+/**
+ * @brief vprintf-like function to sent log messages to the host.
+ *
+ * @param format  Address of format string.
+ * @param args    List of arguments.
+ *
+ * @return Number of bytes written.
+ */
+int esp_sysview_vprintf(const char * format, va_list args);
+
+/**
+ * @brief  Starts SystemView heap tracing.
+ *
+ * @param tmo Timeout (in us) to wait for the host to be connected. Use -1 to wait forever.
+ *
+ * @return ESP_OK on success, ESP_ERR_TIMEOUT if operation has been timed out.
+ */
+esp_err_t esp_sysview_heap_trace_start(uint32_t tmo);
+
+/**
+ * @brief  Stops SystemView heap tracing.
+ *
+ * @return ESP_OK.
+ */
+esp_err_t esp_sysview_heap_trace_stop(void);
+
+/**
+ * @brief Sends heap allocation event to the host.
+ *
+ * @param addr      Address of allocated block.
+ * @param size      Size of allocated block.
+ * @param callers   Pointer to array with callstack addresses.
+ *                  Array size must be CONFIG_HEAP_TRACING_STACK_DEPTH.
+ */
+void esp_sysview_heap_trace_alloc(void *addr, uint32_t size, const void *callers);
+
+/**
+ * @brief Sends heap de-allocation event to the host.
+ *
+ * @param addr      Address of de-allocated block.
+ * @param callers   Pointer to array with callstack addresses.
+ *                  Array size must be CONFIG_HEAP_TRACING_STACK_DEPTH.
+ */
+void esp_sysview_heap_trace_free(void *addr, const void *callers);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif //ESP_SYSVIEW_TRACE_H_

components/app_trace/linker.lf

@@ -0,0 +1,18 @@
+[mapping:app_trace]
+archive: libapp_trace.a
+entries: 
+    app_trace (noflash)
+    app_trace_util (noflash)
+    SEGGER_SYSVIEW (noflash)
+    SEGGER_RTT_esp32 (noflash)
+    SEGGER_SYSVIEW_Config_FreeRTOS (noflash)
+    SEGGER_SYSVIEW_FreeRTOS (noflash)
+
+[mapping:driver]
+archive: libdriver.a
+entries:
+    if SYSVIEW_TS_SOURCE_TIMER_00 = y || SYSVIEW_TS_SOURCE_TIMER_01 = y
+       || SYSVIEW_TS_SOURCE_TIMER_10 = y || SYSVIEW_TS_SOURCE_TIMER_11 = y:
+      timer (noflash)
+    else:
+      * (default)

components/app_trace/project_include.cmake

@@ -0,0 +1,23 @@
+# idf_create_lcov_report
+#
+# Create coverage report.
+function(idf_create_coverage_report report_dir)
+    set(gcov_tool ${CONFIG_SDK_TOOLPREFIX}gcov)
+    idf_build_get_property(project_name PROJECT_NAME)
+
+    add_custom_target(lcov-report
+        COMMENT "Generating coverage report in: ${report_dir}"
+        COMMAND ${CMAKE_COMMAND} -E echo "Using gcov: ${gcov_tool}"
+        COMMAND ${CMAKE_COMMAND} -E make_directory ${report_dir}/html
+        COMMAND lcov --gcov-tool ${gcov_tool} -c -d ${CMAKE_CURRENT_BINARY_DIR} -o ${report_dir}/${project_name}.info
+        COMMAND genhtml -o ${report_dir}/html ${report_dir}/${project_name}.info)
+endfunction()
+
+# idf_clean_coverage_report
+#
+# Clean coverage report.
+function(idf_clean_coverage_report report_dir)
+    add_custom_target(cov-data-clean
+        COMMENT "Clean coverage report in: ${report_dir}"
+        COMMAND ${CMAKE_COMMAND} -E remove_directory ${report_dir})
+endfunction()

components/app_trace/sdkconfig.rename

@@ -0,0 +1,12 @@
+# sdkconfig replacement configurations for deprecated options formatted as
+# CONFIG_DEPRECATED_OPTION CONFIG_NEW_OPTION
+
+CONFIG_ESP32_APPTRACE_DESTINATION      					CONFIG_APPTRACE_DESTINATION
+CONFIG_ESP32_APPTRACE_DEST_NONE							CONFIG_APPTRACE_DEST_NONE
+CONFIG_ESP32_APPTRACE_DEST_TRAX							CONFIG_APPTRACE_DEST_TRAX
+CONFIG_ESP32_APPTRACE_ENABLE							CONFIG_APPTRACE_ENABLE
+CONFIG_ESP32_APPTRACE_LOCK_ENABLE						CONFIG_APPTRACE_LOCK_ENABLE
+CONFIG_ESP32_APPTRACE_ONPANIC_HOST_FLUSH_TMO			CONFIG_APPTRACE_ONPANIC_HOST_FLUSH_TMO
+CONFIG_ESP32_APPTRACE_POSTMORTEM_FLUSH_TRAX_THRESH      CONFIG_APPTRACE_POSTMORTEM_FLUSH_THRESH
+CONFIG_ESP32_APPTRACE_PENDING_DATA_SIZE_MAX				CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX
+CONFIG_ESP32_GCOV_ENABLE								CONFIG_APPTRACE_GCOV_ENABLE

components/app_trace/sys_view/Config/SEGGER_RTT_Conf.h

@@ -285,12 +285,12 @@ Revision: $Rev: 5626 $
 *       RTT lock configuration fallback
 */
 #ifndef   SEGGER_RTT_LOCK
-  void SEGGER_SYSVIEW_X_RTT_Lock();
+  void SEGGER_SYSVIEW_X_RTT_Lock(void);
   #define SEGGER_RTT_LOCK()                SEGGER_SYSVIEW_X_RTT_Lock() // Lock RTT (nestable)   (i.e. disable interrupts)
 #endif
 
 #ifndef   SEGGER_RTT_UNLOCK
-  void SEGGER_SYSVIEW_X_RTT_Unlock();
+  void SEGGER_SYSVIEW_X_RTT_Unlock(void);
   #define SEGGER_RTT_UNLOCK()              SEGGER_SYSVIEW_X_RTT_Unlock() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
 #endif
 

components/app_trace/sys_view/Config/SEGGER_SYSVIEW_Conf.h

@@ -65,6 +65,8 @@ Revision: $Rev: 5927 $
 #ifndef SEGGER_SYSVIEW_CONF_H
 #define SEGGER_SYSVIEW_CONF_H
 
+#include "soc/soc.h"
+
 /*********************************************************************
 *
 *       Defines, fixed
@@ -147,7 +149,7 @@ Revision: $Rev: 5927 $
 *       SystemView Id configuration
 */
 //TODO: optimise it
-#define SEGGER_SYSVIEW_ID_BASE         0x3F400000                               // Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM)
+#define SEGGER_SYSVIEW_ID_BASE         SOC_DROM_LOW                             // Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM)
 #define SEGGER_SYSVIEW_ID_SHIFT        0                                        // Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned)
 
 /*********************************************************************
@@ -166,10 +168,11 @@ Revision: $Rev: 5927 $
   #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function.
 #endif
 
-void SEGGER_SYSVIEW_X_SysView_Lock();
-void SEGGER_SYSVIEW_X_SysView_Unlock();
-#define SEGGER_SYSVIEW_LOCK()   SEGGER_SYSVIEW_X_SysView_Lock()
-#define SEGGER_SYSVIEW_UNLOCK() SEGGER_SYSVIEW_X_SysView_Unlock()
+unsigned SEGGER_SYSVIEW_X_SysView_Lock(void);
+void SEGGER_SYSVIEW_X_SysView_Unlock(unsigned int_state);
+// to be recursive save IRQ status on the stack of the caller
+#define SEGGER_SYSVIEW_LOCK()   unsigned _SYSVIEW_int_state = SEGGER_SYSVIEW_X_SysView_Lock()
+#define SEGGER_SYSVIEW_UNLOCK() SEGGER_SYSVIEW_X_SysView_Unlock(_SYSVIEW_int_state)
 
 #endif  // SEGGER_SYSVIEW_CONF_H
 

components/app_trace/sys_view/SEGGER/SEGGER_RTT.h

@@ -160,6 +160,7 @@ unsigned     SEGGER_RTT_WriteSkipNoLock         (unsigned BufferIndex, const voi
 unsigned     SEGGER_RTT_WriteString             (unsigned BufferIndex, const char* s);
 void         SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 void         SEGGER_RTT_ESP32_FlushNoLock       (unsigned long min_sz, unsigned long tmo);
+void         SEGGER_RTT_ESP32_Flush             (unsigned long min_sz, unsigned long tmo);
 //
 // Function macro for performance optimization
 //

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW.c

@@ -1689,6 +1689,10 @@ void SEGGER_SYSVIEW_Stop(void) {
   RECORD_END();
 }
 
+U8 SEGGER_SYSVIEW_Started(void) {
+    return _SYSVIEW_Globals.EnableState;
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_GetSysDesc()
@@ -2368,7 +2372,7 @@ void SEGGER_SYSVIEW_RegisterModule(SEGGER_SYSVIEW_MODULE* pModule) {
     _pFirstModule = pModule;
     _NumModules++;
   }
-  SEGGER_SYSVIEW_SendModule(0);
+  SEGGER_SYSVIEW_SendModule(_NumModules-1);
   if (pModule->pfSendModuleDesc) {
     pModule->pfSendModuleDesc();
   }
@@ -2678,7 +2682,7 @@ void SEGGER_SYSVIEW_ErrorfTarget(const char* s, ...) {
 void SEGGER_SYSVIEW_Print(const char* s) {
   U8* pPayload;
   U8* pPayloadStart;
-  RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN);
+  RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN + 3/*1 or 3 bytes for string length*/);
   //
   pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN);
   ENCODE_U32(pPayload, SEGGER_SYSVIEW_LOG);

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW.h

@@ -230,6 +230,8 @@ void SEGGER_SYSVIEW_GetSysDesc                    (void);
 void SEGGER_SYSVIEW_SendTaskList                  (void);
 void SEGGER_SYSVIEW_SendTaskInfo                  (const SEGGER_SYSVIEW_TASKINFO* pInfo);
 void SEGGER_SYSVIEW_SendSysDesc                   (const char* sSysDesc);
+// Checks whether tracing has been started
+U8 SEGGER_SYSVIEW_Started(void);
 
 /*********************************************************************
 *

components/app_trace/sys_view/Sample/Config/SEGGER_SYSVIEW_Config_FreeRTOS.c

@@ -63,11 +63,26 @@ Revision: $Rev: 3734 $
 */
 #include "freertos/FreeRTOS.h"
 #include "SEGGER_SYSVIEW.h"
-#include "rom/ets_sys.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/ets_sys.h"
+#include "esp32/clk.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/ets_sys.h"
+#include "esp32s2beta/clk.h"
+#endif
 #include "esp_app_trace.h"
 #include "esp_app_trace_util.h"
 #include "esp_intr_alloc.h"
-#include "esp_clk.h"
+#include "soc/soc.h"
+#include "soc/interrupts.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/ets_sys.h"
+#include "esp32/clk.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/ets_sys.h"
+#include "esp32s2beta/clk.h"
+#endif
+
 
 extern const SEGGER_SYSVIEW_OS_API SYSVIEW_X_OS_TraceAPI;
 
@@ -81,7 +96,7 @@ extern const SEGGER_SYSVIEW_OS_API SYSVIEW_X_OS_TraceAPI;
 #define SYSVIEW_APP_NAME        "FreeRTOS Application"
 
 // The target device name
-#define SYSVIEW_DEVICE_NAME     "ESP32"
+#define SYSVIEW_DEVICE_NAME     CONFIG_IDF_TARGET
 
 // Determine which timer to use as timestamp source
 #if CONFIG_SYSVIEW_TS_SOURCE_CCOUNT
@@ -123,14 +138,18 @@ extern const SEGGER_SYSVIEW_OS_API SYSVIEW_X_OS_TraceAPI;
 
 #if TS_USE_CCOUNT
 // CCOUNT is incremented at CPU frequency
+#if CONFIG_IDF_TARGET_ESP32
 #define SYSVIEW_TIMESTAMP_FREQ  (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ * 1000000)
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#define SYSVIEW_TIMESTAMP_FREQ  (CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ * 1000000)
+#endif
 #endif // TS_USE_CCOUNT
 
 // System Frequency.
 #define SYSVIEW_CPU_FREQ        (esp_clk_cpu_freq())
 
 // The lowest RAM address used for IDs (pointers)
-#define SYSVIEW_RAM_BASE        (0x3F400000)
+#define SYSVIEW_RAM_BASE        (SOC_DROM_LOW)
 
 #if CONFIG_FREERTOS_CORETIMER_0
     #define SYSTICK_INTR_ID (ETS_INTERNAL_TIMER0_INTR_SOURCE+ETS_INTERNAL_INTR_SOURCE_OFF)
@@ -147,78 +166,6 @@ extern const SEGGER_SYSVIEW_OS_API SYSVIEW_X_OS_TraceAPI;
 
 static esp_apptrace_lock_t s_sys_view_lock = {.mux = portMUX_INITIALIZER_UNLOCKED, .int_state = 0};
 
-static const char * const s_isr_names[] = {
-    [0] = "WIFI_MAC",
-    [1] = "WIFI_NMI",
-    [2] = "WIFI_BB",
-    [3] = "BT_MAC",
-    [4] = "BT_BB",
-    [5] = "BT_BB_NMI",
-    [6] = "RWBT",
-    [7] = "RWBLE",
-    [8] = "RWBT_NMI",
-    [9] = "RWBLE_NMI",
-    [10] = "SLC0",
-    [11] = "SLC1",
-    [12] = "UHCI0",
-    [13] = "UHCI1",
-    [14] = "TG0_T0_LEVEL",
-    [15] = "TG0_T1_LEVEL",
-    [16] = "TG0_WDT_LEVEL",
-    [17] = "TG0_LACT_LEVEL",
-    [18] = "TG1_T0_LEVEL",
-    [19] = "TG1_T1_LEVEL",
-    [20] = "TG1_WDT_LEVEL",
-    [21] = "TG1_LACT_LEVEL",
-    [22] = "GPIO",
-    [23] = "GPIO_NMI",
-    [24] = "FROM_CPU0",
-    [25] = "FROM_CPU1",
-    [26] = "FROM_CPU2",
-    [27] = "FROM_CPU3",
-    [28] = "SPI0",
-    [29] = "SPI1",
-    [30] = "SPI2",
-    [31] = "SPI3",
-    [32] = "I2S0",
-    [33] = "I2S1",
-    [34] = "UART0",
-    [35] = "UART1",
-    [36] = "UART2",
-    [37] = "SDIO_HOST",
-    [38] = "ETH_MAC",
-    [39] = "PWM0",
-    [40] = "PWM1",
-    [41] = "PWM2",
-    [42] = "PWM3",
-    [43] = "LEDC",
-    [44] = "EFUSE",
-    [45] = "CAN",
-    [46] = "RTC_CORE",
-    [47] = "RMT",
-    [48] = "PCNT",
-    [49] = "I2C_EXT0",
-    [50] = "I2C_EXT1",
-    [51] = "RSA",
-    [52] = "SPI1_DMA",
-    [53] = "SPI2_DMA",
-    [54] = "SPI3_DMA",
-    [55] = "WDT",
-    [56] = "TIMER1",
-    [57] = "TIMER2",
-    [58] = "TG0_T0_EDGE",
-    [59] = "TG0_T1_EDGE",
-    [60] = "TG0_WDT_EDGE",
-    [61] = "TG0_LACT_EDGE",
-    [62] = "TG1_T0_EDGE",
-    [63] = "TG1_T1_EDGE",
-    [64] = "TG1_WDT_EDGE",
-    [65] = "TG1_LACT_EDGE",
-    [66] = "MMU_IA",
-    [67] = "MPU_IA",
-    [68] = "CACHE_IA",
-};
-
 /*********************************************************************
 *
 *       _cbSendSystemDesc()
@@ -231,9 +178,9 @@ static void _cbSendSystemDesc(void) {
     SEGGER_SYSVIEW_SendSysDesc("N="SYSVIEW_APP_NAME",D="SYSVIEW_DEVICE_NAME",C=Xtensa,O=FreeRTOS");
     snprintf(irq_str, sizeof(irq_str), "I#%d=SysTick", SYSTICK_INTR_ID);
     SEGGER_SYSVIEW_SendSysDesc(irq_str);
-    size_t isr_count = sizeof(s_isr_names)/sizeof(s_isr_names[0]);
+    size_t isr_count = sizeof(esp_isr_names)/sizeof(esp_isr_names[0]);
     for (size_t i = 0; i < isr_count; ++i) {
-        snprintf(irq_str, sizeof(irq_str), "I#%d=%s", ETS_INTERNAL_INTR_SOURCE_OFF + i, s_isr_names[i]);
+        snprintf(irq_str, sizeof(irq_str), "I#%d=%s", ETS_INTERNAL_INTR_SOURCE_OFF + i, esp_isr_names[i]);
         SEGGER_SYSVIEW_SendSysDesc(irq_str);
     }
 }
@@ -244,7 +191,7 @@ static void _cbSendSystemDesc(void) {
 *
 **********************************************************************
 */
-static void SEGGER_SYSVIEW_TS_Init()
+static void SEGGER_SYSVIEW_TS_Init(void)
 {
     /* We only need to initialize something if we use Timer Group.
      * esp_timer and ccount can be used as is.
@@ -316,7 +263,7 @@ void SEGGER_SYSVIEW_Conf(void) {
   SEGGER_SYSVIEW_DisableEvents(disable_evts);
 }
 
-U32 SEGGER_SYSVIEW_X_GetTimestamp()
+U32 SEGGER_SYSVIEW_X_GetTimestamp(void)
 {
 #if TS_USE_TIMERGROUP
     uint64_t ts = 0;
@@ -329,23 +276,26 @@ U32 SEGGER_SYSVIEW_X_GetTimestamp()
 #endif
 }
 
-void SEGGER_SYSVIEW_X_RTT_Lock()
+void SEGGER_SYSVIEW_X_RTT_Lock(void)
 {
 }
 
-void SEGGER_SYSVIEW_X_RTT_Unlock()
+void SEGGER_SYSVIEW_X_RTT_Unlock(void)
 {
 }
 
-void SEGGER_SYSVIEW_X_SysView_Lock()
+unsigned SEGGER_SYSVIEW_X_SysView_Lock(void)
 {
     esp_apptrace_tmo_t tmo;
     esp_apptrace_tmo_init(&tmo, SEGGER_LOCK_WAIT_TMO);
     esp_apptrace_lock_take(&s_sys_view_lock, &tmo);
+    // to be recursive save IRQ status on the stack of the caller to keep it from overwriting
+    return s_sys_view_lock.int_state;
 }
 
-void SEGGER_SYSVIEW_X_SysView_Unlock()
+void SEGGER_SYSVIEW_X_SysView_Unlock(unsigned int_state)
 {
+    s_sys_view_lock.int_state = int_state;
     esp_apptrace_lock_give(&s_sys_view_lock);
 }
 

components/app_trace/sys_view/Sample/OS/SEGGER_SYSVIEW_FreeRTOS.h

@@ -80,7 +80,7 @@ Notes:
   #define portSTACK_GROWTH              ( -1 )
 #endif
 
-#define SYSVIEW_FREERTOS_MAX_NOF_TASKS  16
+#define SYSVIEW_FREERTOS_MAX_NOF_TASKS  CONFIG_SYSVIEW_MAX_TASKS
 
 /*********************************************************************
 *
@@ -244,8 +244,10 @@ Notes:
   #define traceQUEUE_SEND( pxQueue )                                    SYSVIEW_RecordU32x4(apiFastID_OFFSET + apiID_XQUEUEGENERICSEND, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), 0, 0, xCopyPosition)
 #endif
 #define traceQUEUE_SEND_FAILED( pxQueue )                             SYSVIEW_RecordU32x4(apiFastID_OFFSET + apiID_XQUEUEGENERICSEND, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pvItemToQueue, xTicksToWait, xCopyPosition)
-#define traceQUEUE_SEND_FROM_ISR( pxQueue )                           SEGGER_SYSVIEW_RecordU32x2(apiFastID_OFFSET + apiID_XQUEUEGENERICSENDFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pxHigherPriorityTaskWoken)
-#define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )                    SEGGER_SYSVIEW_RecordU32x2(apiFastID_OFFSET + apiID_XQUEUEGENERICSENDFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pxHigherPriorityTaskWoken)
+#define traceQUEUE_SEND_FROM_ISR( pxQueue )                           SEGGER_SYSVIEW_RecordU32x4(apiFastID_OFFSET + apiID_XQUEUEGENERICSENDFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pvItemToQueue, (U32)pxHigherPriorityTaskWoken, xCopyPosition)
+#define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )                    SEGGER_SYSVIEW_RecordU32x4(apiFastID_OFFSET + apiID_XQUEUEGENERICSENDFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pvItemToQueue, (U32)pxHigherPriorityTaskWoken, xCopyPosition)
+#define traceQUEUE_GIVE_FROM_ISR( pxQueue )                           SEGGER_SYSVIEW_RecordU32x2(apiFastID_OFFSET + apiID_XQUEUEGIVEFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pxHigherPriorityTaskWoken)
+#define traceQUEUE_GIVE_FROM_ISR_FAILED( pxQueue )                    SEGGER_SYSVIEW_RecordU32x2(apiFastID_OFFSET + apiID_XQUEUEGIVEFROMISR, SEGGER_SYSVIEW_ShrinkId((U32)pxQueue), (U32)pxHigherPriorityTaskWoken)
 
 #if( portSTACK_GROWTH < 0 )
 #define traceTASK_CREATE(pxNewTCB)                  if (pxNewTCB != NULL) {                                             \

components/app_trace/sys_view/esp32/SEGGER_RTT_esp32.c

@@ -16,8 +16,13 @@
 #include "freertos/FreeRTOS.h"
 #include "SEGGER_RTT.h"
 #include "SEGGER_SYSVIEW.h"
+#include "SEGGER_SYSVIEW_Conf.h"
 
-#include "rom/ets_sys.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/ets_sys.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/ets_sys.h"
+#endif
 #include "esp_app_trace.h"
 
 #include "esp_log.h"
@@ -27,8 +32,12 @@ const static char *TAG = "segger_rtt";
 
 // size of down channel data buf
 #define SYSVIEW_DOWN_BUF_SIZE   32
-#define SEGGER_HOST_WAIT_TMO    500 //us
 #define SEGGER_STOP_WAIT_TMO    1000000 //us
+#if CONFIG_SYSVIEW_BUF_WAIT_TMO == -1
+#define SEGGER_HOST_WAIT_TMO    ESP_APPTRACE_TMO_INFINITE
+#else
+#define SEGGER_HOST_WAIT_TMO    CONFIG_SYSVIEW_BUF_WAIT_TMO
+#endif
 
 static uint8_t s_events_buf[SYSVIEW_EVENTS_BUF_SZ];
 static uint16_t s_events_buf_filled;
@@ -57,9 +66,12 @@ static uint8_t s_down_buf[SYSVIEW_DOWN_BUF_SIZE];
 */
 void SEGGER_RTT_ESP32_FlushNoLock(unsigned long min_sz, unsigned long tmo)
 {
-    esp_err_t res = esp_apptrace_write(ESP_APPTRACE_DEST_TRAX, s_events_buf, s_events_buf_filled, tmo);
-    if (res != ESP_OK) {
-      ESP_LOGE(TAG, "Failed to flush buffered events (%d)!\n", res);
+    esp_err_t res;
+    if (s_events_buf_filled > 0) {
+      res = esp_apptrace_write(ESP_APPTRACE_DEST_TRAX, s_events_buf, s_events_buf_filled, tmo);
+      if (res != ESP_OK) {
+        ESP_LOGE(TAG, "Failed to flush buffered events (%d)!\n", res);
+      }
     }
     // flush even if we failed to write buffered events, because no new events will be sent after STOP
     res = esp_apptrace_flush_nolock(ESP_APPTRACE_DEST_TRAX, min_sz, tmo);
@@ -69,6 +81,27 @@ void SEGGER_RTT_ESP32_FlushNoLock(unsigned long min_sz, unsigned long tmo)
     s_events_buf_filled = 0;
 }
 
+/*********************************************************************
+*
+*       SEGGER_RTT_ESP32_Flush()
+*
+*  Function description
+*    Flushes buffered events.
+*
+*  Parameters
+*    min_sz  Threshold for flushing data. If current filling level is above this value, data will be flushed. TRAX destinations only.
+*    tmo     Timeout for operation (in us). Use ESP_APPTRACE_TMO_INFINITE to wait indefinetly.
+*
+*  Return value
+*    None.
+*/
+void SEGGER_RTT_ESP32_Flush(unsigned long min_sz, unsigned long tmo)
+{
+    SEGGER_SYSVIEW_LOCK();
+    SEGGER_RTT_ESP32_FlushNoLock(min_sz, tmo);
+    SEGGER_SYSVIEW_UNLOCK();
+}
+
 /*********************************************************************
 *
 *       SEGGER_RTT_ReadNoLock()

components/app_trace/sys_view/ext/heap_trace_module.c

@@ -0,0 +1,100 @@
+// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <stdint.h>
+#include <sdkconfig.h>
+#include "SEGGER_SYSVIEW.h"
+#include "SEGGER_RTT.h"
+#include "esp_app_trace.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include "esp_log.h"
+const static char *TAG = "sysview_heap_trace";
+
+#ifdef CONFIG_HEAP_TRACING_STACK_DEPTH
+#define CALLSTACK_SIZE  CONFIG_HEAP_TRACING_STACK_DEPTH
+#else
+#define CALLSTACK_SIZE  0
+#endif
+
+static SEGGER_SYSVIEW_MODULE s_esp_sysview_heap_module = {
+    .sModule = "ESP32 SystemView Heap Tracing Module",
+    .NumEvents = 2,
+};
+
+static bool s_mod_registered;
+
+
+esp_err_t esp_sysview_heap_trace_start(uint32_t tmo)
+{
+    uint32_t tmo_ticks = tmo/(1000*portTICK_PERIOD_MS);
+
+    ESP_EARLY_LOGV(TAG, "%s", __func__);
+    do {
+        if (tmo != (uint32_t)-1) {
+            // Currently timeout implementation is simple and has granularity of 1 OS tick,
+            // so just count down the number of times to call vTaskDelay
+            if (tmo_ticks-- == 0) {
+                return ESP_ERR_TIMEOUT;
+            }
+        }
+        vTaskDelay(1);
+    } while(!SEGGER_SYSVIEW_Started());
+
+    SEGGER_SYSVIEW_RegisterModule(&s_esp_sysview_heap_module);
+    s_mod_registered = true;
+    return ESP_OK;
+}
+
+esp_err_t esp_sysview_heap_trace_stop(void)
+{
+    ESP_EARLY_LOGV(TAG, "%s", __func__);
+    SEGGER_RTT_ESP32_Flush(0, ESP_APPTRACE_TMO_INFINITE);
+    return ESP_OK;
+}
+
+void esp_sysview_heap_trace_alloc(const void *addr, uint32_t size, const void *callers)
+{
+    U8  aPacket[SEGGER_SYSVIEW_INFO_SIZE + (2+CALLSTACK_SIZE)*SEGGER_SYSVIEW_QUANTA_U32];
+    U8* pPayload = SEGGER_SYSVIEW_PREPARE_PACKET(aPacket);
+    U32 *calls = (U32 *)callers;
+
+    if (!s_mod_registered) {
+        return;
+    }
+    ESP_EARLY_LOGV(TAG, "%s %p %lu", __func__, addr, size);
+    pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, (U32)addr);
+    pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, size);
+    for (int i = 0; i < CALLSTACK_SIZE; i++) {
+        pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, calls[i]);
+    }
+    SEGGER_SYSVIEW_SendPacket(&aPacket[0], pPayload, s_esp_sysview_heap_module.EventOffset + 0);
+}
+
+void esp_sysview_heap_trace_free(const void *addr, const void *callers)
+{
+    U8  aPacket[SEGGER_SYSVIEW_INFO_SIZE + (1+CALLSTACK_SIZE)*SEGGER_SYSVIEW_QUANTA_U32];
+    U8* pPayload = SEGGER_SYSVIEW_PREPARE_PACKET(aPacket);
+    U32 *calls = (U32 *)callers;
+
+    if (!s_mod_registered) {
+        return;
+    }
+    ESP_EARLY_LOGV(TAG, "%s %p", __func__, addr);
+    pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, (U32)addr);
+    for (int i = 0; i < CALLSTACK_SIZE; i++) {
+        pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, calls[i]);
+    }
+    SEGGER_SYSVIEW_SendPacket(&aPacket[0], pPayload, s_esp_sysview_heap_module.EventOffset + 1);
+}

components/app_trace/sys_view/ext/logging.c

@@ -0,0 +1,34 @@
+// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <stdio.h>
+#include <stdarg.h>
+#include <sdkconfig.h>
+#include "SEGGER_SYSVIEW_Int.h"
+#include "freertos/FreeRTOS.h"
+
+static portMUX_TYPE s_log_mutex = portMUX_INITIALIZER_UNLOCKED;
+
+int esp_sysview_vprintf(const char * format, va_list args)
+{
+    static char log_buffer[SEGGER_SYSVIEW_MAX_STRING_LEN];
+
+    portENTER_CRITICAL(&s_log_mutex);
+    size_t len = vsnprintf(log_buffer, sizeof(log_buffer), format, args);
+    if (len > sizeof(log_buffer) - 1) {
+        log_buffer[sizeof(log_buffer - 1)] = 0;
+    }
+    SEGGER_SYSVIEW_Print(log_buffer);
+    portEXIT_CRITICAL(&s_log_mutex);
+    return len;
+}

components/app_trace/test/CMakeLists.txt

@@ -1,6 +1,3 @@
-set(COMPONENT_SRCDIRS ".")
-set(COMPONENT_ADD_INCLUDEDIRS ".")
-
-set(COMPONENT_REQUIRES unity)
-
-register_component()
+idf_component_register(SRC_DIRS "."
+                    INCLUDE_DIRS "."
+                    REQUIRES unity)

components/app_trace/test/test_trace.c

@@ -9,7 +9,7 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/semphr.h"
 #include "freertos/task.h"
-#if CONFIG_ESP32_APPTRACE_ENABLE == 1
+#if CONFIG_APPTRACE_ENABLE == 1
 #include "esp_app_trace.h"
 #include "esp_app_trace_util.h"
 
@@ -125,7 +125,7 @@ typedef struct {
 static SemaphoreHandle_t s_print_lock;
 #endif
 
-static uint64_t esp_apptrace_test_ts_get();
+static uint64_t esp_apptrace_test_ts_get(void);
 
 static void esp_apptrace_test_timer_isr(void *arg)
 {
@@ -145,56 +145,16 @@ static void esp_apptrace_test_timer_isr(void *arg)
     }
 
     tim_arg->data.wr_cnt++;
-    if (tim_arg->group == 0) {
-        if (tim_arg->id == 0) {
-            TIMERG0.int_clr_timers.t0 = 1;
-            TIMERG0.hw_timer[0].update = 1;
-            TIMERG0.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG0.int_clr_timers.t1 = 1;
-            TIMERG0.hw_timer[1].update = 1;
-            TIMERG0.hw_timer[1].config.alarm_en = 1;
-        }
-    }
-    if (tim_arg->group == 1) {
-        if (tim_arg->id == 0) {
-            TIMERG1.int_clr_timers.t0 = 1;
-            TIMERG1.hw_timer[0].update = 1;
-            TIMERG1.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG1.int_clr_timers.t1 = 1;
-            TIMERG1.hw_timer[1].update = 1;
-            TIMERG1.hw_timer[1].config.alarm_en = 1;
-        }
-    }
+    timer_group_clr_intr_status_in_isr(tim_arg->group, tim_arg->id);
+    timer_group_enable_alarm_in_isr(tim_arg->group, tim_arg->id);
 }
 
 static void esp_apptrace_test_timer_isr_crash(void *arg)
 {
     esp_apptrace_test_timer_arg_t *tim_arg = (esp_apptrace_test_timer_arg_t *)arg;
 
-    if (tim_arg->group == 0) {
-        if (tim_arg->id == 0) {
-            TIMERG0.int_clr_timers.t0 = 1;
-            TIMERG0.hw_timer[0].update = 1;
-            TIMERG0.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG0.int_clr_timers.t1 = 1;
-            TIMERG0.hw_timer[1].update = 1;
-            TIMERG0.hw_timer[1].config.alarm_en = 1;
-        }
-    }
-    if (tim_arg->group == 1) {
-        if (tim_arg->id == 0) {
-            TIMERG1.int_clr_timers.t0 = 1;
-            TIMERG1.hw_timer[0].update = 1;
-            TIMERG1.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG1.int_clr_timers.t1 = 1;
-            TIMERG1.hw_timer[1].update = 1;
-            TIMERG1.hw_timer[1].config.alarm_en = 1;
-        }
-    }
+    timer_group_clr_intr_status_in_isr(tim_arg->group, tim_arg->id);
+    timer_group_enable_alarm_in_isr(tim_arg->group, tim_arg->id);
     if (tim_arg->data.wr_cnt < ESP_APPTRACE_TEST_BLOCKS_BEFORE_CRASH) {
         uint32_t *ts = (uint32_t *)(tim_arg->data.buf + sizeof(uint32_t));
         *ts = (uint32_t)esp_apptrace_test_ts_get();//xthal_get_ccount();//xTaskGetTickCount();
@@ -383,7 +343,7 @@ static void esp_apptrace_test_task_crash(void *p)
 
 static int s_ts_timer_group, s_ts_timer_idx;
 
-static uint64_t esp_apptrace_test_ts_get()
+static uint64_t esp_apptrace_test_ts_get(void)
 {
     uint64_t ts = 0;
     timer_get_counter_value(s_ts_timer_group, s_ts_timer_idx, &ts);
@@ -413,7 +373,7 @@ static void esp_apptrace_test_ts_init(int timer_group, int timer_idx)
     timer_start(timer_group, timer_idx);
 }
 
-static void esp_apptrace_test_ts_cleanup()
+static void esp_apptrace_test_ts_cleanup(void)
 {
     timer_config_t config;
 
@@ -850,28 +810,8 @@ static void esp_sysview_test_timer_isr(void *arg)
 
     //ESP_APPTRACE_TEST_LOGI("tim-%d: IRQ %d/%d\n", tim_arg->id, tim_arg->group, tim_arg->timer);
 
-    if (tim_arg->group == 0) {
-        if (tim_arg->timer == 0) {
-            TIMERG0.int_clr_timers.t0 = 1;
-            TIMERG0.hw_timer[0].update = 1;
-            TIMERG0.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG0.int_clr_timers.t1 = 1;
-            TIMERG0.hw_timer[1].update = 1;
-            TIMERG0.hw_timer[1].config.alarm_en = 1;
-        }
-    }
-    if (tim_arg->group == 1) {
-        if (tim_arg->timer == 0) {
-            TIMERG1.int_clr_timers.t0 = 1;
-            TIMERG1.hw_timer[0].update = 1;
-            TIMERG1.hw_timer[0].config.alarm_en = 1;
-        } else {
-            TIMERG1.int_clr_timers.t1 = 1;
-            TIMERG1.hw_timer[1].update = 1;
-            TIMERG1.hw_timer[1].config.alarm_en = 1;
-        }
-    }
+    timer_group_clr_intr_status_in_isr(tim_arg->group, tim_arg->id);
+    timer_group_enable_alarm_in_isr(tim_arg->group, tim_arg->id);
 }
 
 static void esp_sysviewtrace_test_task(void *p)

components/app_update/CMakeLists.txt

@@ -1,17 +1,60 @@
-set(COMPONENT_SRCS "esp_ota_ops.c")
-set(COMPONENT_ADD_INCLUDEDIRS "include")
+idf_component_register(SRCS "esp_ota_ops.c" 
+                            "esp_app_desc.c"
+                    INCLUDE_DIRS "include"
+                    REQUIRES spi_flash partition_table bootloader_support)
 
-set(COMPONENT_REQUIRES spi_flash partition_table)
-set(COMPONENT_PRIV_REQUIRES bootloader_support)
+# esp_app_desc structure is added as an undefined symbol because otherwise the
+# linker will ignore this structure as it has no other files depending on it.
+target_link_libraries(${COMPONENT_LIB} INTERFACE "-u esp_app_desc")
 
-register_component()
+# cut PROJECT_VER and PROJECT_NAME to required 32 characters.
+idf_build_get_property(project_ver PROJECT_VER)
+idf_build_get_property(project_name PROJECT_NAME)
+string(SUBSTRING "${project_ver}" 0 31 PROJECT_VER_CUT)
+string(SUBSTRING "${project_name}" 0 31 PROJECT_NAME_CUT)
 
-# Add custom target for generating empty otadata partition for flashing
-if(${OTADATA_PARTITION_OFFSET})
-    add_custom_command(OUTPUT "${PROJECT_BINARY_DIR}/${BLANK_OTADATA_FILE}"
-        COMMAND ${PYTHON} ${CMAKE_CURRENT_SOURCE_DIR}/gen_empty_partition.py
-        --size ${OTADATA_PARTITION_SIZE} "${PROJECT_BINARY_DIR}/${BLANK_OTADATA_FILE}")
+set_source_files_properties(
+    SOURCE "esp_app_desc.c"
+    PROPERTIES COMPILE_DEFINITIONS
+    "PROJECT_VER=\"${PROJECT_VER_CUT}\"; PROJECT_NAME=\"${PROJECT_NAME_CUT}\"")
 
-    add_custom_target(blank_ota_data ALL DEPENDS "${PROJECT_BINARY_DIR}/${BLANK_OTADATA_FILE}")
-    add_dependencies(flash blank_ota_data)
+if(NOT BOOTLOADER_BUILD)
+    partition_table_get_partition_info(otadata_offset "--partition-type data --partition-subtype ota" "offset")
+    partition_table_get_partition_info(otadata_size "--partition-type data --partition-subtype ota" "size")
+
+    # Add custom target for generating empty otadata partition for flashing
+    if(otadata_size AND otadata_offset)
+        idf_build_get_property(build_dir BUILD_DIR)
+        set(blank_otadata_file ${build_dir}/ota_data_initial.bin)
+
+        idf_build_get_property(idf_path IDF_PATH)
+        idf_build_get_property(python PYTHON)
+
+        idf_component_get_property(partition_table_dir partition_table COMPONENT_DIR)
+
+        add_custom_command(OUTPUT ${blank_otadata_file}
+            COMMAND ${python} ${partition_table_dir}/gen_empty_partition.py
+            ${otadata_size} ${blank_otadata_file})
+
+        add_custom_target(blank_ota_data ALL DEPENDS ${blank_otadata_file})
+        add_dependencies(flash blank_ota_data)
+
+        set(otatool_py ${python} ${COMPONENT_DIR}/otatool.py)
+
+        set(esptool_args --esptool-args before=${CONFIG_ESPTOOLPY_BEFORE} after=${CONFIG_ESPTOOLPY_AFTER})
+
+        add_custom_target(read_otadata DEPENDS "${PARTITION_CSV_PATH}"
+                        COMMAND ${otatool_py} ${esptool_args}
+                        --partition-table-file ${PARTITION_CSV_PATH} 
+                        --partition-table-offset ${PARTITION_TABLE_OFFSET}
+                        read_otadata)
+
+        add_custom_target(erase_otadata DEPENDS "${PARTITION_CSV_PATH}"
+                        COMMAND ${otatool_py} ${esptool_args}
+                        --partition-table-file ${PARTITION_CSV_PATH}
+                        --partition-table-offset ${PARTITION_TABLE_OFFSET}
+                        erase_otadata)
+
+        esptool_py_flash_project_args(otadata ${otadata_offset} "${blank_otadata_file}" FLASH_IN_PROJECT)
+    endif()
 endif()

components/app_update/Kconfig.projbuild

@@ -0,0 +1,25 @@
+menu "Application manager"
+
+    config APP_COMPILE_TIME_DATE
+        bool "Use time/date stamp for app"
+        default y
+        help
+            If set, then the app will be built with the current time/date stamp. It is stored in the app description
+            structure. If not set, time/date stamp will be excluded from app image. This can be useful for getting the
+            same binary image files made from the same source, but at different times.
+
+    config APP_EXCLUDE_PROJECT_VER_VAR
+        bool "Exclude PROJECT_VER from firmware image"
+        default n
+        help
+            The PROJECT_VER variable from the build system will not affect the firmware image.
+            This value will not be contained in the esp_app_desc structure.
+
+    config APP_EXCLUDE_PROJECT_NAME_VAR
+        bool "Exclude PROJECT_NAME from firmware image"
+        default n
+        help
+            The PROJECT_NAME variable from the build system will not affect the firmware image.
+            This value will not be contained in the esp_app_desc structure.
+
+endmenu # "Application manager"

components/app_update/Makefile.projbuild

@@ -1,60 +1,54 @@
 # Generate partition binary
 #
-.PHONY: dump_otadata erase_ota blank_ota_data
+.PHONY: blank_ota_data erase_otadata read_otadata
 
-GEN_EMPTY_PART := $(PYTHON) $(COMPONENT_PATH)/gen_empty_partition.py
+OTATOOL_PY := $(PYTHON) $(COMPONENT_PATH)/otatool.py
+PARTTOOL_PY := $(PYTHON) $(IDF_PATH)/components/partition_table/parttool.py
+
+# Generate blank partition file
 BLANK_OTA_DATA_FILE = $(BUILD_DIR_BASE)/ota_data_initial.bin
 
-PARTITION_TABLE_LEN := 0xC00
-OTADATA_LEN := 0x2000
+# Copy PARTITION_TABLE_CSV_PATH definition here from $IDF_PATH/components/partition_table/Makefile.projbuild
+# to avoid undefined variables warning for PARTITION_TABLE_CSV_PATH
+ifndef PARTITION_TABLE_CSV_PATH
+PARTITION_TABLE_ROOT := $(call dequote,$(if $(CONFIG_PARTITION_TABLE_CUSTOM),$(PROJECT_PATH),$(IDF_PATH)/components/partition_table))
+PARTITION_TABLE_CSV_PATH := $(call dequote,$(abspath $(PARTITION_TABLE_ROOT)/$(call dequote,$(CONFIG_PARTITION_TABLE_FILENAME))))
+endif
 
-PARTITION_TABLE_ONCHIP_BIN_PATH := $(call dequote,$(abspath $(BUILD_DIR_BASE)))
-PARTITION_TABLE_ONCHIP_BIN_NAME := "onchip_partition.bin"
-OTADATA_ONCHIP_BIN_NAME := "onchip_otadata.bin"
+$(BLANK_OTA_DATA_FILE): partition_table_get_info $(PARTITION_TABLE_CSV_PATH) | check_python_dependencies
+	$(shell if [ "$(OTA_DATA_OFFSET)" != "" ] && [ "$(OTA_DATA_SIZE)" != "" ]; then \
+				$(PYTHON) $(IDF_PATH)/components/partition_table/gen_empty_partition.py $(OTA_DATA_SIZE) $(BLANK_OTA_DATA_FILE); \
+			fi; )
+	$(eval BLANK_OTA_DATA_FILE = $(shell if [ "$(OTA_DATA_OFFSET)" != "" ] && [ "$(OTA_DATA_SIZE)" != "" ]; then \
+			echo $(BLANK_OTA_DATA_FILE); else echo " "; fi) )
 
-PARTITION_TABLE_ONCHIP_BIN := $(PARTITION_TABLE_ONCHIP_BIN_PATH)/$(call dequote,$(PARTITION_TABLE_ONCHIP_BIN_NAME)) 
-OTADATA_ONCHIP_BIN := $(PARTITION_TABLE_ONCHIP_BIN_PATH)/$(call dequote,$(OTADATA_ONCHIP_BIN_NAME))
-
-PARTITION_TABLE_GET_BIN_CMD = $(ESPTOOLPY_SERIAL) read_flash $(PARTITION_TABLE_OFFSET) $(PARTITION_TABLE_LEN) $(PARTITION_TABLE_ONCHIP_BIN)
-OTADATA_GET_BIN_CMD = $(ESPTOOLPY_SERIAL) read_flash $(OTADATA_OFFSET) $(OTADATA_LEN) $(OTADATA_ONCHIP_BIN)
-
-GEN_OTADATA = $(IDF_PATH)/components/app_update/dump_otadata.py
-ERASE_OTADATA_CMD = $(ESPTOOLPY_SERIAL) erase_region $(OTADATA_OFFSET) $(OTADATA_LEN)
+blank_ota_data: $(BLANK_OTA_DATA_FILE)
 
 # If there is no otadata partition, both OTA_DATA_OFFSET and BLANK_OTA_DATA_FILE 
 # expand to empty values.
 ESPTOOL_ALL_FLASH_ARGS += $(OTA_DATA_OFFSET) $(BLANK_OTA_DATA_FILE)
 
-$(PARTITION_TABLE_ONCHIP_BIN):
-	$(PARTITION_TABLE_GET_BIN_CMD)
+ESPTOOL_ARGS := --esptool-args port=$(CONFIG_ESPTOOLPY_PORT) baud=$(CONFIG_ESPTOOLPY_BAUD) before=$(CONFIG_ESPTOOLPY_BEFORE) after=$(CONFIG_ESPTOOLPY_AFTER)
 
-onchip_otadata_get_info: $(PARTITION_TABLE_ONCHIP_BIN) 
-	$(eval OTADATA_OFFSET:=$(shell $(GET_PART_INFO) --type data --subtype ota --offset $(PARTITION_TABLE_ONCHIP_BIN)))
-	@echo $(if $(OTADATA_OFFSET), $(shell export OTADATA_OFFSET), $(shell rm -f $(PARTITION_TABLE_ONCHIP_BIN));$(error "ERROR: ESP32 does not have otadata partition."))
+erase_otadata: $(PARTITION_TABLE_CSV_PATH) partition_table_get_info | check_python_dependencies
+	$(OTATOOL_PY) $(ESPTOOL_ARGS) --partition-table-file $(PARTITION_TABLE_CSV_PATH) \
+	--partition-table-offset $(PARTITION_TABLE_OFFSET) \
+	erase_otadata
 
-$(OTADATA_ONCHIP_BIN):
-	$(OTADATA_GET_BIN_CMD)
-
-dump_otadata: onchip_otadata_get_info $(OTADATA_ONCHIP_BIN) $(PARTITION_TABLE_ONCHIP_BIN) 
-	@echo "otadata retrieved. Contents:"
-	@echo $(SEPARATOR)
-	$(GEN_OTADATA) $(OTADATA_ONCHIP_BIN)
-	@echo $(SEPARATOR)
-	rm -f $(PARTITION_TABLE_ONCHIP_BIN)
-	rm -f $(OTADATA_ONCHIP_BIN)
-
-$(BLANK_OTA_DATA_FILE): partition_table_get_info
-	$(GEN_EMPTY_PART) --size $(OTA_DATA_SIZE) $(BLANK_OTA_DATA_FILE)
-	$(eval BLANK_OTA_DATA_FILE = $(shell if [ $(OTA_DATA_SIZE) != 0 ]; then echo $(BLANK_OTA_DATA_FILE); else echo " "; fi) )
-
-blank_ota_data: $(BLANK_OTA_DATA_FILE)
-
-erase_ota: partition_table_get_info | check_python_dependencies
-	@echo $(if $(OTA_DATA_OFFSET), "Erase ota_data [addr=$(OTA_DATA_OFFSET) size=$(OTA_DATA_SIZE)] ...", $(error "ERROR: Partition table does not have ota_data partition."))
-	$(ESPTOOLPY_SERIAL) erase_region $(OTA_DATA_OFFSET) $(OTA_DATA_SIZE)
+read_otadata: $(PARTITION_TABLE_CSV_PATH) partition_table_get_info | check_python_dependencies
+	$(OTATOOL_PY) $(ESPTOOL_ARGS) --partition-table-file $(PARTITION_TABLE_CSV_PATH) \ 
+	--partition-table-offset $(partition_table_offset) \ 
+	read_otadata
 
 all: blank_ota_data
 flash: blank_ota_data
+ifdef CONFIG_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+encrypted-flash: blank_ota_data
+endif
+
+TMP_DEFINES := $(BUILD_DIR_BASE)/app_update/tmp_cppflags.txt
+export TMP_DEFINES
 
 clean:
 	rm -f $(BLANK_OTA_DATA_FILE)
+	rm -f $(TMP_DEFINES)

components/app_update/component.mk

@@ -3,3 +3,54 @@
 #
 # (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
 
+# esp_app_desc structure is added as an undefined symbol because otherwise the 
+# linker will ignore this structure as it has no other files depending on it.
+COMPONENT_ADD_LDFLAGS += -u esp_app_desc
+
+ifndef IS_BOOTLOADER_BUILD
+GET_PROJECT_VER ?=
+ifeq ("${PROJECT_VER}", "")
+ifeq ("$(wildcard ${PROJECT_PATH}/version.txt)","")
+
+GET_PROJECT_VER := $(shell cd ${PROJECT_PATH} && git describe --always --tags --dirty 2> /dev/null)
+ifeq ("${GET_PROJECT_VER}", "")
+GET_PROJECT_VER := "1"
+$(info Project is not inside a git repository, will not use 'git describe' to determine PROJECT_VER.)
+endif
+
+else
+# read from version.txt
+GET_PROJECT_VER := $(shell cat ${PROJECT_PATH}/version.txt)
+endif
+endif
+# If ``PROJECT_VER`` variable set in project Makefile file, its value will be used.
+# Else, if the ``$PROJECT_PATH/version.txt`` exists, its contents will be used as ``PROJECT_VER``.
+# Else, if the project is located inside a Git repository, the output of git describe will be used.
+# Otherwise, ``PROJECT_VER`` will be "1".
+
+ifeq ("${PROJECT_VER}", "")
+PROJECT_VER:= $(GET_PROJECT_VER)
+else
+PROJECT_VER:= $(PROJECT_VER)
+endif
+
+# cut PROJECT_VER and PROJECT_NAME to required 32 characters.
+PROJECT_VER_CUT  := $(shell echo "$(PROJECT_VER)"  | cut -c 1-31)
+PROJECT_NAME_CUT := $(shell echo "$(PROJECT_NAME)" | cut -c 1-31)
+
+$(info App "$(PROJECT_NAME_CUT)" version: $(PROJECT_VER_CUT))
+
+NEW_DEFINES:= "$(PROJECT_VER_CUT) $(PROJECT_NAME_CUT) $(IDF_VER)"
+ifeq ("$(wildcard ${TMP_DEFINES})","")
+OLD_DEFINES:= ""
+else
+OLD_DEFINES:= "$(shell cat $(TMP_DEFINES))"
+endif
+
+# If NEW_DEFINES (PROJECT_VER, PROJECT_NAME) were changed then rebuild only esp_app_desc.
+ifneq (${NEW_DEFINES}, ${OLD_DEFINES})
+$(shell echo $(NEW_DEFINES) > $(TMP_DEFINES); rm -f esp_app_desc.o;)
+endif
+
+esp_app_desc.o: CPPFLAGS += -D PROJECT_VER=\""$(PROJECT_VER_CUT)"\" -D PROJECT_NAME=\""$(PROJECT_NAME_CUT)"\"
+endif

components/app_update/dump_otadata.py

@@ -1,88 +0,0 @@
-#!/usr/bin/env python
-#
-# gen_otadata prints info about the otadata partition.
-#
-# Copyright 2018 Espressif Systems (Shanghai) PTE LTD
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http:#www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-from __future__ import print_function, division
-import argparse
-import os
-import re
-import struct
-import sys
-import hashlib
-import binascii
-
-__version__ = '1.0'
-
-quiet = False
-
-def status(msg):
-    """ Print status message to stderr """
-    if not quiet:
-        critical(msg)
-
-def critical(msg):
-    """ Print critical message to stderr """
-    if not quiet:
-        sys.stderr.write(msg)
-        sys.stderr.write('\n')
-
-def little_endian(buff, offset):
-    data = buff[offset:offset+4]
-    data.reverse()
-    data = ''.join(data)
-    return data
-               
-def main():
-    global quiet
-    parser = argparse.ArgumentParser(description='Prints otadata partition in human readable form.')
-
-    parser.add_argument('--quiet', '-q', help="Don't print status messages to stderr", action='store_true')
-
-    search_type = parser.add_mutually_exclusive_group()
-
-    parser.add_argument('input', help='Path to binary file containing otadata partition to parse.',
-                        type=argparse.FileType('rb'))
-
-    args = parser.parse_args()
-
-    quiet = args.quiet
-
-    input = args.input.read()
-    
-    hex_input_0 = binascii.hexlify(input)
-    hex_input_0 = map(''.join, zip(*[iter(hex_input_0)]*2))
-    hex_input_1 = binascii.hexlify(input[4096:])
-    hex_input_1 = map(''.join, zip(*[iter(hex_input_1)]*2))
-    
-    print("\t%11s\t%8s    |\t%8s\t%8s" %("OTA_SEQ", "CRC", "OTA_SEQ", "CRC"))
-    print("Firmware:  0x%s  \t 0x%s |\t0x%s \t 0x%s" % (little_endian(hex_input_0, 0), little_endian(hex_input_0, 28), \
-                                                        little_endian(hex_input_1, 0), little_endian(hex_input_1, 28)))
-class InputError(RuntimeError):
-    def __init__(self, e):
-        super(InputError, self).__init__(e)
-
-class ValidationError(InputError):
-    def __init__(self, partition, message):
-        super(ValidationError, self).__init__(
-            "Partition %s invalid: %s" % (partition.name, message))
-
-if __name__ == '__main__':
-    try:
-        r = main()
-        sys.exit(r)
-    except InputError as e:
-        print(e, file=sys.stderr)
-        sys.exit(2)

components/app_update/esp_app_desc.c

@@ -0,0 +1,85 @@
+// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include <assert.h>
+#include <sys/param.h>
+#include "esp_ota_ops.h"
+#include "esp_attr.h"
+#include "sdkconfig.h"
+
+// Application version info
+const __attribute__((section(".rodata_desc"))) esp_app_desc_t esp_app_desc = {
+    .magic_word = ESP_APP_DESC_MAGIC_WORD,
+#ifdef CONFIG_APP_EXCLUDE_PROJECT_VER_VAR
+    .version = "",
+#else
+    .version = PROJECT_VER,
+#endif
+
+#ifdef CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR
+    .project_name = "",
+#else
+    .project_name = PROJECT_NAME,
+#endif
+    .idf_ver = IDF_VER,
+
+#ifdef CONFIG_BOOTLOADER_APP_SECURE_VERSION
+    .secure_version = CONFIG_BOOTLOADER_APP_SECURE_VERSION,
+#else
+    .secure_version = 0,
+#endif
+
+#ifdef CONFIG_APP_COMPILE_TIME_DATE
+    .time = __TIME__,
+    .date = __DATE__,
+#else
+    .time = "",
+    .date = "",
+#endif
+};
+
+
+#ifndef CONFIG_APP_EXCLUDE_PROJECT_VER_VAR
+_Static_assert(sizeof(PROJECT_VER) <= sizeof(esp_app_desc.version), "PROJECT_VER is longer than version field in structure");
+#endif
+_Static_assert(sizeof(IDF_VER) <= sizeof(esp_app_desc.idf_ver), "IDF_VER is longer than idf_ver field in structure");
+#ifndef CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR
+_Static_assert(sizeof(PROJECT_NAME) <= sizeof(esp_app_desc.project_name), "PROJECT_NAME is longer than project_name field in structure");
+#endif
+
+const esp_app_desc_t *esp_ota_get_app_description(void)
+{
+    return &esp_app_desc;
+}
+
+/* The following two functions may be called from the panic handler
+ * or core dump, hence IRAM_ATTR.
+ */
+
+static inline char IRAM_ATTR to_hex_digit(unsigned val)
+{
+    return (val < 10) ? ('0' + val) : ('a' + val - 10);
+}
+
+int IRAM_ATTR esp_ota_get_app_elf_sha256(char* dst, size_t size)
+{
+    size_t n = MIN((size - 1) / 2, sizeof(esp_app_desc.app_elf_sha256));
+    const uint8_t* src = esp_app_desc.app_elf_sha256;
+    for (size_t i = 0; i < n; ++i) {
+        dst[2*i] = to_hex_digit(src[i] >> 4);
+        dst[2*i + 1] = to_hex_digit(src[i] & 0xf);
+    }
+    dst[2*n] = 0;
+    return 2*n + 1;
+}

components/app_update/esp_ota_ops.c

@@ -32,15 +32,17 @@
 #include "sdkconfig.h"
 
 #include "esp_ota_ops.h"
-#include "rom/queue.h"
-#include "rom/crc.h"
-#include "soc/dport_reg.h"
+#include "sys/queue.h"
+#include "esp32/rom/crc.h"
 #include "esp_log.h"
+#include "esp_flash_partitions.h"
+#include "bootloader_common.h"
+#include "sys/param.h"
+#include "esp_system.h"
+#include "esp_efuse.h"
 
 
-#define OTA_MAX(a,b) ((a) >= (b) ? (a) : (b)) 
-#define OTA_MIN(a,b) ((a) <= (b) ? (a) : (b)) 
-#define SUB_TYPE_ID(i) (i & 0x0F) 
+#define SUB_TYPE_ID(i) (i & 0x0F)
 
 typedef struct ota_ops_entry_ {
     uint32_t handle;
@@ -52,19 +54,10 @@ typedef struct ota_ops_entry_ {
     LIST_ENTRY(ota_ops_entry_) entries;
 } ota_ops_entry_t;
 
-/* OTA selection structure (two copies in the OTA data partition.)
-   Size of 32 bytes is friendly to flash encryption */
-typedef struct {
-    uint32_t ota_seq;
-    uint8_t  seq_label[24];
-    uint32_t crc;                /* CRC32 of ota_seq field only */
-} ota_select;
-
 static LIST_HEAD(ota_ops_entries_head, ota_ops_entry_) s_ota_ops_entries_head =
     LIST_HEAD_INITIALIZER(s_ota_ops_entries_head);
 
 static uint32_t s_ota_ops_last_handle = 0;
-static ota_select s_ota_select[2];
 
 const static char *TAG = "esp_ota_ops";
 
@@ -77,6 +70,56 @@ static bool is_ota_partition(const esp_partition_t *p)
             && p->subtype < ESP_PARTITION_SUBTYPE_APP_OTA_MAX);
 }
 
+// Read otadata partition and fill array from two otadata structures.
+// Also return pointer to otadata info partition.
+static const esp_partition_t *read_otadata(esp_ota_select_entry_t *two_otadata)
+{
+    const esp_partition_t *otadata_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
+
+    if (otadata_partition == NULL) {
+        ESP_LOGE(TAG, "not found otadata");
+        return NULL;
+    }
+
+    spi_flash_mmap_handle_t ota_data_map;
+    const void *result = NULL;
+    esp_err_t err = esp_partition_mmap(otadata_partition, 0, otadata_partition->size, SPI_FLASH_MMAP_DATA, &result, &ota_data_map);
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "mmap otadata filed. Err=0x%8x", err);
+        return NULL;
+    } else {
+        memcpy(&two_otadata[0], result, sizeof(esp_ota_select_entry_t));
+        memcpy(&two_otadata[1], result + SPI_FLASH_SEC_SIZE, sizeof(esp_ota_select_entry_t));
+        spi_flash_munmap(ota_data_map);
+    }
+    return otadata_partition;
+}
+
+static esp_err_t image_validate(const esp_partition_t *partition, esp_image_load_mode_t load_mode)
+{
+    esp_image_metadata_t data;
+    const esp_partition_pos_t part_pos = {
+        .offset = partition->address,
+        .size = partition->size,
+    };
+
+    if (esp_image_verify(load_mode, &part_pos, &data) != ESP_OK) {
+        return ESP_ERR_OTA_VALIDATE_FAILED;
+    }
+
+    return ESP_OK;
+}
+
+static esp_ota_img_states_t set_new_state_otadata(void)
+{
+#ifdef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+    ESP_LOGD(TAG, "Monitoring the first boot of the app is enabled.");
+    return ESP_OTA_IMG_NEW;
+#else
+    return ESP_OTA_IMG_UNDEFINED;
+#endif
+}
+
 esp_err_t esp_ota_begin(const esp_partition_t *partition, size_t image_size, esp_ota_handle_t *out_handle)
 {
     ota_ops_entry_t *new_entry;
@@ -95,10 +138,21 @@ esp_err_t esp_ota_begin(const esp_partition_t *partition, size_t image_size, esp
         return ESP_ERR_INVALID_ARG;
     }
 
-    if (partition == esp_ota_get_running_partition()) {
+    const esp_partition_t* running_partition = esp_ota_get_running_partition();
+    if (partition == running_partition) {
         return ESP_ERR_OTA_PARTITION_CONFLICT;
     }
 
+#ifdef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+    esp_ota_img_states_t ota_state_running_part;
+    if (esp_ota_get_state_partition(running_partition, &ota_state_running_part) == ESP_OK) {
+        if (ota_state_running_part == ESP_OTA_IMG_PENDING_VERIFY) {
+            ESP_LOGE(TAG, "Running app has not confirmed state (ESP_OTA_IMG_PENDING_VERIFY)");
+            return ESP_ERR_OTA_ROLLBACK_INVALID_STATE;
+        }
+    }
+#endif
+
     // If input image size is 0 or OTA_SIZE_UNKNOWN, erase entire partition
     if ((image_size == 0) || (image_size == OTA_SIZE_UNKNOWN)) {
         ret = esp_partition_erase_range(partition, 0, partition->size);
@@ -145,9 +199,8 @@ esp_err_t esp_ota_write(esp_ota_handle_t handle, const void *data, size_t size)
         if (it->handle == handle) {
             // must erase the partition before writing to it
             assert(it->erased_size > 0 && "must erase the partition before writing to it");
-
-            if(it->wrote_size == 0 && size > 0 && data_bytes[0] != 0xE9) {
-                ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x", data_bytes[0]);
+            if (it->wrote_size == 0 && it->partial_bytes == 0 && size > 0 && data_bytes[0] != ESP_IMAGE_HEADER_MAGIC) {
+                ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x)", data_bytes[0]);
                 return ESP_ERR_OTA_VALIDATE_FAILED;
             }
 
@@ -157,7 +210,7 @@ esp_err_t esp_ota_write(esp_ota_handle_t handle, const void *data, size_t size)
 
                 /* check if we have partially written data from earlier */
                 if (it->partial_bytes != 0) {
-                    copy_len = OTA_MIN(16 - it->partial_bytes, size);
+                    copy_len = MIN(16 - it->partial_bytes, size);
                     memcpy(it->partial_data + it->partial_bytes, data_bytes, copy_len);
                     it->partial_bytes += copy_len;
                     if (it->partial_bytes != 16) {
@@ -247,32 +300,20 @@ esp_err_t esp_ota_end(esp_ota_handle_t handle)
     return ret;
 }
 
-static uint32_t ota_select_crc(const ota_select *s)
+static esp_err_t rewrite_ota_seq(esp_ota_select_entry_t *two_otadata, uint32_t seq, uint8_t sec_id, const esp_partition_t *ota_data_partition)
 {
-    return crc32_le(UINT32_MAX, (uint8_t *)&s->ota_seq, 4);
-}
-
-static bool ota_select_valid(const ota_select *s)
-{
-    return s->ota_seq != UINT32_MAX && s->crc == ota_select_crc(s);
-}
-
-static esp_err_t rewrite_ota_seq(uint32_t seq, uint8_t sec_id, const esp_partition_t *ota_data_partition)
-{
-    esp_err_t ret;
-
-    if (sec_id == 0 || sec_id == 1) {
-        s_ota_select[sec_id].ota_seq = seq;
-        s_ota_select[sec_id].crc = ota_select_crc(&s_ota_select[sec_id]);
-        ret = esp_partition_erase_range(ota_data_partition, sec_id * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
-        if (ret != ESP_OK) {
-            return ret;
-        } else {
-            return esp_partition_write(ota_data_partition, SPI_FLASH_SEC_SIZE * sec_id, &s_ota_select[sec_id].ota_seq, sizeof(ota_select));
-        }
-    } else {
+    if (two_otadata == NULL || sec_id > 1) {
         return ESP_ERR_INVALID_ARG;
     }
+
+    two_otadata[sec_id].ota_seq = seq;
+    two_otadata[sec_id].crc = bootloader_common_ota_select_crc(&two_otadata[sec_id]);
+    esp_err_t ret = esp_partition_erase_range(ota_data_partition, sec_id * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
+    if (ret != ESP_OK) {
+        return ret;
+    } else {
+        return esp_partition_write(ota_data_partition, SPI_FLASH_SEC_SIZE * sec_id, &two_otadata[sec_id], sizeof(esp_ota_select_entry_t));
+    }
 }
 
 static uint8_t get_ota_partition_count(void)
@@ -287,119 +328,88 @@ static uint8_t get_ota_partition_count(void)
 
 static esp_err_t esp_rewrite_ota_data(esp_partition_subtype_t subtype)
 {
-    esp_err_t ret;
-    const esp_partition_t *find_partition = NULL;
-    uint16_t ota_app_count = 0;
-    uint32_t i = 0;
-    uint32_t seq;
-    spi_flash_mmap_handle_t ota_data_map;
-    const void *result = NULL;
-
-    find_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
-    if (find_partition != NULL) {
-        ota_app_count = get_ota_partition_count();
-        //esp32_idf use two sector for store information about which partition is running
-        //it defined the two sector as ota data partition,two structure ota_select is saved in the two sector
-        //named data in first sector as s_ota_select[0], second sector data as s_ota_select[1]
-        //e.g.
-        //if s_ota_select[0].ota_seq == s_ota_select[1].ota_seq == 0xFFFFFFFF,means ota info partition is in init status
-        //so it will boot factory application(if there is),if there's no factory application,it will boot ota[0] application 
-        //if s_ota_select[0].ota_seq != 0 and s_ota_select[1].ota_seq != 0,it will choose a max seq ,and get value of max_seq%max_ota_app_number
-        //and boot a subtype (mask 0x0F) value is (max_seq - 1)%max_ota_app_number,so if want switch to run ota[x],can use next formulas.
-        //for example, if s_ota_select[0].ota_seq = 4, s_ota_select[1].ota_seq = 5, and there are 8 ota application, 
-        //current running is (5-1)%8 = 4,running ota[4],so if we want to switch to run ota[7],
-        //we should add s_ota_select[0].ota_seq (is 4) to 4 ,(8-1)%8=7,then it will boot ota[7]
-        //if      A=(B - C)%D
-        //then    B=(A + C)%D + D*n ,n= (0,1,2...)
-        //so current ota app sub type id is x , dest bin subtype is y,total ota app count is n
-        //seq will add (x + n*1 + 1 - seq)%n
-        if (SUB_TYPE_ID(subtype) >= ota_app_count) {
-            return ESP_ERR_INVALID_ARG;
-        }
-
-        ret = esp_partition_mmap(find_partition, 0, find_partition->size, SPI_FLASH_MMAP_DATA, &result, &ota_data_map);
-        if (ret != ESP_OK) {
-            result = NULL;
-            return ret;
-        } else {
-            memcpy(&s_ota_select[0], result, sizeof(ota_select));
-            memcpy(&s_ota_select[1], result + SPI_FLASH_SEC_SIZE, sizeof(ota_select));
-            spi_flash_munmap(ota_data_map);
-        }
-
-        if (ota_select_valid(&s_ota_select[0]) && ota_select_valid(&s_ota_select[1])) {
-            seq = OTA_MAX(s_ota_select[0].ota_seq, s_ota_select[1].ota_seq);
-            while (seq > (SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count) {
-                i++;
-            }
-
-            if (s_ota_select[0].ota_seq >= s_ota_select[1].ota_seq) {
-                return rewrite_ota_seq((SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count, 1, find_partition);
-            } else {
-                return rewrite_ota_seq((SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count, 0, find_partition);
-            }
-
-        } else if (ota_select_valid(&s_ota_select[0])) {
-            while (s_ota_select[0].ota_seq > (SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count) {
-                i++;
-            }
-            return rewrite_ota_seq((SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count, 1, find_partition);
-
-        } else if (ota_select_valid(&s_ota_select[1])) {
-            while (s_ota_select[1].ota_seq > (SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count) {
-                i++;
-            }
-            return rewrite_ota_seq((SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count, 0, find_partition);
-
-        } else {
-            /* Both OTA slots are invalid, probably because unformatted... */
-            return rewrite_ota_seq(SUB_TYPE_ID(subtype) + 1, 0, find_partition);
-        }
-
-    } else {
+    esp_ota_select_entry_t otadata[2];
+    const esp_partition_t *otadata_partition = read_otadata(otadata);
+    if (otadata_partition == NULL) {
         return ESP_ERR_NOT_FOUND;
     }
+
+    int ota_app_count = get_ota_partition_count();
+    if (SUB_TYPE_ID(subtype) >= ota_app_count) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    //esp32_idf use two sector for store information about which partition is running
+    //it defined the two sector as ota data partition,two structure esp_ota_select_entry_t is saved in the two sector
+    //named data in first sector as otadata[0], second sector data as otadata[1]
+    //e.g.
+    //if otadata[0].ota_seq == otadata[1].ota_seq == 0xFFFFFFFF,means ota info partition is in init status
+    //so it will boot factory application(if there is),if there's no factory application,it will boot ota[0] application
+    //if otadata[0].ota_seq != 0 and otadata[1].ota_seq != 0,it will choose a max seq ,and get value of max_seq%max_ota_app_number
+    //and boot a subtype (mask 0x0F) value is (max_seq - 1)%max_ota_app_number,so if want switch to run ota[x],can use next formulas.
+    //for example, if otadata[0].ota_seq = 4, otadata[1].ota_seq = 5, and there are 8 ota application,
+    //current running is (5-1)%8 = 4,running ota[4],so if we want to switch to run ota[7],
+    //we should add otadata[0].ota_seq (is 4) to 4 ,(8-1)%8=7,then it will boot ota[7]
+    //if      A=(B - C)%D
+    //then    B=(A + C)%D + D*n ,n= (0,1,2...)
+    //so current ota app sub type id is x , dest bin subtype is y,total ota app count is n
+    //seq will add (x + n*1 + 1 - seq)%n
+
+    int active_otadata = bootloader_common_get_active_otadata(otadata);
+    if (active_otadata != -1) {
+        uint32_t seq = otadata[active_otadata].ota_seq;
+        uint32_t i = 0;
+        while (seq > (SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count) {
+            i++;
+        }
+        int next_otadata = (~active_otadata)&1; // if 0 -> will be next 1. and if 1 -> will be next 0.
+        otadata[next_otadata].ota_state = set_new_state_otadata();
+        return rewrite_ota_seq(otadata, (SUB_TYPE_ID(subtype) + 1) % ota_app_count + i * ota_app_count, next_otadata, otadata_partition);
+    } else {
+        /* Both OTA slots are invalid, probably because unformatted... */
+        int next_otadata = 0;
+        otadata[next_otadata].ota_state = set_new_state_otadata();
+        return rewrite_ota_seq(otadata, SUB_TYPE_ID(subtype) + 1, next_otadata, otadata_partition);
+    }
 }
 
 esp_err_t esp_ota_set_boot_partition(const esp_partition_t *partition)
 {
-    const esp_partition_t *find_partition = NULL;
     if (partition == NULL) {
         return ESP_ERR_INVALID_ARG;
     }
 
-    esp_image_metadata_t data;
-    const esp_partition_pos_t part_pos = {
-        .offset = partition->address,
-        .size = partition->size,
-    };
-    if (esp_image_verify(ESP_IMAGE_VERIFY, &part_pos, &data) != ESP_OK) {
+    if (image_validate(partition, ESP_IMAGE_VERIFY) != ESP_OK) {
         return ESP_ERR_OTA_VALIDATE_FAILED;
     }
 
-#ifdef CONFIG_SECURE_SIGNED_ON_UPDATE
-    esp_err_t ret = esp_secure_boot_verify_signature(partition->address, data.image_len);
-    if (ret != ESP_OK) {
-        return ESP_ERR_OTA_VALIDATE_FAILED;
-    }
-#endif
     // if set boot partition to factory bin ,just format ota info partition
     if (partition->type == ESP_PARTITION_TYPE_APP) {
         if (partition->subtype == ESP_PARTITION_SUBTYPE_APP_FACTORY) {
-            find_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
+            const esp_partition_t *find_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
             if (find_partition != NULL) {
                 return esp_partition_erase_range(find_partition, 0, find_partition->size);
             } else {
                 return ESP_ERR_NOT_FOUND;
             }
         } else {
-            // try to find this partition in flash,if not find it ,return error
-            find_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
-            if (find_partition != NULL) {
-                return esp_rewrite_ota_data(partition->subtype);
-            } else {
-                return ESP_ERR_NOT_FOUND;
+#ifdef CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+            esp_app_desc_t partition_app_desc;
+            esp_err_t err = esp_ota_get_partition_description(partition, &partition_app_desc);
+            if (err != ESP_OK) {
+                return err;
             }
+
+            if (esp_efuse_check_secure_version(partition_app_desc.secure_version) == false) {
+                ESP_LOGE(TAG, "This a new partition can not be booted due to a secure version is lower than stored in efuse. Partition will be erased.");
+                esp_err_t err = esp_partition_erase_range(partition, 0, partition->size);
+                if (err != ESP_OK) {
+                    return err;
+                }
+                return ESP_ERR_OTA_SMALL_SEC_VER;
+            }
+#endif
+            return esp_rewrite_ota_data(partition->subtype);
         }
     } else {
         return ESP_ERR_INVALID_ARG;
@@ -436,58 +446,30 @@ static const esp_partition_t *find_default_boot_partition(void)
 
 const esp_partition_t *esp_ota_get_boot_partition(void)
 {
-    esp_err_t ret;
-    const esp_partition_t *find_partition = NULL;
-    spi_flash_mmap_handle_t ota_data_map;
-    const void *result = NULL;
-    uint16_t ota_app_count = 0;
-    find_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
-
-    if (find_partition == NULL) {
-        ESP_LOGE(TAG, "not found ota data");
+    esp_ota_select_entry_t otadata[2];
+    const esp_partition_t *otadata_partition = read_otadata(otadata);
+    if (otadata_partition == NULL) {
         return NULL;
     }
 
-    ret = esp_partition_mmap(find_partition, 0, find_partition->size, SPI_FLASH_MMAP_DATA, &result, &ota_data_map);
-    if (ret != ESP_OK) {
-        spi_flash_munmap(ota_data_map);
-        ESP_LOGE(TAG, "mmap ota data filed");
-        return NULL;
-    } else {
-        memcpy(&s_ota_select[0], result, sizeof(ota_select));
-        memcpy(&s_ota_select[1], result + 0x1000, sizeof(ota_select));
-        spi_flash_munmap(ota_data_map);
-    }
-    ota_app_count = get_ota_partition_count();
-
+    int ota_app_count = get_ota_partition_count();
     ESP_LOGD(TAG, "found ota app max = %d", ota_app_count);
 
-    if (s_ota_select[0].ota_seq == 0xFFFFFFFF && s_ota_select[1].ota_seq == 0xFFFFFFFF) {
-        ESP_LOGD(TAG, "finding factory app......");
+    if ((bootloader_common_ota_select_invalid(&otadata[0]) &&
+         bootloader_common_ota_select_invalid(&otadata[1])) ||
+         ota_app_count == 0) {
+        ESP_LOGD(TAG, "finding factory app...");
         return find_default_boot_partition();
-    } else if (ota_select_valid(&s_ota_select[0]) && ota_select_valid(&s_ota_select[1])) {
-        ESP_LOGD(TAG, "finding ota_%d app......", \
-                 ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ((OTA_MAX(s_ota_select[0].ota_seq, s_ota_select[1].ota_seq) - 1) % ota_app_count));
-
-        return esp_partition_find_first(ESP_PARTITION_TYPE_APP, \
-                                        ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ((OTA_MAX(s_ota_select[0].ota_seq, s_ota_select[1].ota_seq) - 1) % ota_app_count), NULL);
-    } else if (ota_select_valid(&s_ota_select[0])) {
-        ESP_LOGD(TAG, "finding ota_%d app......", \
-                 ESP_PARTITION_SUBTYPE_APP_OTA_MIN + (s_ota_select[0].ota_seq - 1) % ota_app_count);
-
-        return esp_partition_find_first(ESP_PARTITION_TYPE_APP, \
-                                        ESP_PARTITION_SUBTYPE_APP_OTA_MIN + (s_ota_select[0].ota_seq - 1) % ota_app_count, NULL);
-
-    } else if (ota_select_valid(&s_ota_select[1])) {
-        ESP_LOGD(TAG, "finding ota_%d app......", \
-                 ESP_PARTITION_SUBTYPE_APP_OTA_MIN + (s_ota_select[1].ota_seq - 1) % ota_app_count);
-
-        return esp_partition_find_first(ESP_PARTITION_TYPE_APP, \
-                                        ESP_PARTITION_SUBTYPE_APP_OTA_MIN + (s_ota_select[1].ota_seq - 1) % ota_app_count, NULL);
-
     } else {
-        ESP_LOGE(TAG, "ota data invalid, no current app. Assuming factory");
-        return find_default_boot_partition();
+        int active_otadata = bootloader_common_get_active_otadata(otadata);
+        if (active_otadata != -1) {
+            int ota_slot = (otadata[active_otadata].ota_seq - 1) % ota_app_count; // Actual OTA partition selection
+            ESP_LOGD(TAG, "finding ota_%d app...", ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot);
+            return esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot, NULL);
+        } else {
+            ESP_LOGE(TAG, "ota data invalid, no current app. Assuming factory");
+            return find_default_boot_partition();
+        }
     }
 }
 
@@ -576,3 +558,265 @@ const esp_partition_t* esp_ota_get_next_update_partition(const esp_partition_t *
     return default_ota;
 
 }
+
+esp_err_t esp_ota_get_partition_description(const esp_partition_t *partition, esp_app_desc_t *app_desc)
+{
+    if (partition == NULL || app_desc == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    if(partition->type != ESP_PARTITION_TYPE_APP) {
+        return ESP_ERR_NOT_SUPPORTED;
+    }
+
+    esp_err_t err = esp_partition_read(partition, sizeof(esp_image_header_t) + sizeof(esp_image_segment_header_t), app_desc, sizeof(esp_app_desc_t));
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    if (app_desc->magic_word != ESP_APP_DESC_MAGIC_WORD) {
+        return ESP_ERR_NOT_FOUND;
+    }
+
+    return ESP_OK;
+}
+
+#ifdef CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+static esp_err_t esp_ota_set_anti_rollback(void) {
+    const esp_app_desc_t *app_desc = esp_ota_get_app_description();
+    return esp_efuse_update_secure_version(app_desc->secure_version);
+}
+#endif
+
+// Checks applications on the slots which can be booted in case of rollback.
+// Returns true if the slots have at least one app (except the running app).
+bool esp_ota_check_rollback_is_possible(void)
+{
+    esp_ota_select_entry_t otadata[2];
+    if (read_otadata(otadata) == NULL) {
+        return false;
+    }
+
+    int ota_app_count = get_ota_partition_count();
+    if (ota_app_count == 0) {
+        return false;
+    }
+
+    bool valid_otadata[2];
+    valid_otadata[0] = bootloader_common_ota_select_valid(&otadata[0]);
+    valid_otadata[1] = bootloader_common_ota_select_valid(&otadata[1]);
+
+    int active_ota = bootloader_common_select_otadata(otadata, valid_otadata, true);
+    if (active_ota == -1) {
+        return false;
+    }
+    int last_active_ota = (~active_ota)&1;
+
+    const esp_partition_t *partition = NULL;
+#ifndef CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+    if (valid_otadata[last_active_ota] == false) {
+        partition = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_FACTORY, NULL);
+        if (partition != NULL) {
+            if(image_validate(partition, ESP_IMAGE_VERIFY_SILENT) == ESP_OK) {
+                return true;
+            }
+        }
+    }
+#endif
+
+    if (valid_otadata[last_active_ota] == true) {
+        int slot = (otadata[last_active_ota].ota_seq - 1) % ota_app_count;
+        partition = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_MIN + slot, NULL);
+        if (partition != NULL) {
+            if(image_validate(partition, ESP_IMAGE_VERIFY_SILENT) == ESP_OK) {
+#ifdef CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+                esp_app_desc_t app_desc;
+                if (esp_ota_get_partition_description(partition, &app_desc) == ESP_OK &&
+                    esp_efuse_check_secure_version(app_desc.secure_version) == true) {
+                    return true;
+                }
+#else
+                return true;
+#endif
+            }
+        }
+    }
+    return false;
+}
+
+// if valid == false - will done rollback with reboot. After reboot will boot previous OTA[x] or Factory partition.
+// if valid == true  - it confirm that current OTA[x] is workable. Reboot will not happen.
+static esp_err_t esp_ota_current_ota_is_workable(bool valid)
+{
+    esp_ota_select_entry_t otadata[2];
+    const esp_partition_t *otadata_partition = read_otadata(otadata);
+    if (otadata_partition == NULL) {
+        return ESP_ERR_NOT_FOUND;
+    }
+
+    int active_otadata = bootloader_common_get_active_otadata(otadata);
+    if (active_otadata != -1 && get_ota_partition_count() != 0) {
+        if (valid == true && otadata[active_otadata].ota_state != ESP_OTA_IMG_VALID) {
+            otadata[active_otadata].ota_state = ESP_OTA_IMG_VALID;
+            ESP_LOGD(TAG, "OTA[current] partition is marked as VALID");
+            esp_err_t err = rewrite_ota_seq(otadata, otadata[active_otadata].ota_seq, active_otadata, otadata_partition);
+#ifdef CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+            if (err == ESP_OK) {
+                return esp_ota_set_anti_rollback();
+            }
+#endif
+            return err;
+        } else if (valid == false) {
+            if (esp_ota_check_rollback_is_possible() == false) {
+                ESP_LOGE(TAG, "Rollback is not possible, do not have any suitable apps in slots");
+                return ESP_ERR_OTA_ROLLBACK_FAILED;
+            }
+            ESP_LOGD(TAG, "OTA[current] partition is marked as INVALID");
+            otadata[active_otadata].ota_state = ESP_OTA_IMG_INVALID;
+            esp_err_t err = rewrite_ota_seq(otadata, otadata[active_otadata].ota_seq, active_otadata, otadata_partition);
+            if (err != ESP_OK) {
+                return err;
+            }
+            ESP_LOGI(TAG, "Rollback to previously worked partition. Restart.");
+            esp_restart();
+        }
+    } else {
+        ESP_LOGE(TAG, "Running firmware is factory");
+        return ESP_FAIL;
+    }
+    return ESP_OK;
+}
+
+esp_err_t esp_ota_mark_app_valid_cancel_rollback(void)
+{
+    return esp_ota_current_ota_is_workable(true);
+}
+
+esp_err_t esp_ota_mark_app_invalid_rollback_and_reboot(void)
+{
+    return esp_ota_current_ota_is_workable(false);
+}
+
+static bool check_invalid_otadata (const esp_ota_select_entry_t *s) {
+    return s->ota_seq != UINT32_MAX &&
+           s->crc == bootloader_common_ota_select_crc(s) &&
+           (s->ota_state == ESP_OTA_IMG_INVALID ||
+            s->ota_state == ESP_OTA_IMG_ABORTED);
+}
+
+static int get_last_invalid_otadata(const esp_ota_select_entry_t *two_otadata)
+{
+
+    bool invalid_otadata[2];
+    invalid_otadata[0] = check_invalid_otadata(&two_otadata[0]);
+    invalid_otadata[1] = check_invalid_otadata(&two_otadata[1]);
+    int num_invalid_otadata = bootloader_common_select_otadata(two_otadata, invalid_otadata, false);
+    ESP_LOGD(TAG, "Invalid otadata[%d]", num_invalid_otadata);
+    return num_invalid_otadata;
+}
+
+const esp_partition_t* esp_ota_get_last_invalid_partition(void)
+{
+    esp_ota_select_entry_t otadata[2];
+    if (read_otadata(otadata) == NULL) {
+        return NULL;
+    }
+
+    int invalid_otadata = get_last_invalid_otadata(otadata);
+
+    int ota_app_count = get_ota_partition_count();
+    if (invalid_otadata != -1 && ota_app_count != 0) {
+        int ota_slot = (otadata[invalid_otadata].ota_seq - 1) % ota_app_count;
+        ESP_LOGD(TAG, "Find invalid ota_%d app", ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot);
+
+        const esp_partition_t* invalid_partition = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot, NULL);
+        if (invalid_partition != NULL) {
+            if (image_validate(invalid_partition, ESP_IMAGE_VERIFY_SILENT) != ESP_OK) {
+                ESP_LOGD(TAG, "Last invalid partition has corrupted app");
+                return NULL;
+            }
+        }
+        return invalid_partition;
+    }
+    return NULL;
+}
+
+esp_err_t esp_ota_get_state_partition(const esp_partition_t *partition, esp_ota_img_states_t *ota_state)
+{
+    if (partition == NULL || ota_state == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    if (!is_ota_partition(partition)) {
+        return ESP_ERR_NOT_SUPPORTED;
+    }
+
+    esp_ota_select_entry_t otadata[2];
+    int ota_app_count = get_ota_partition_count();
+    if (read_otadata(otadata) == NULL || ota_app_count == 0) {
+        return ESP_ERR_NOT_FOUND;
+    }
+
+    int req_ota_slot = partition->subtype - ESP_PARTITION_SUBTYPE_APP_OTA_MIN;
+    bool not_found = true;
+    for (int i = 0; i < 2; ++i) {
+        int ota_slot = (otadata[i].ota_seq - 1) % ota_app_count;
+        if (ota_slot == req_ota_slot && otadata[i].crc == bootloader_common_ota_select_crc(&otadata[i])) {
+            *ota_state = otadata[i].ota_state;
+            not_found = false;
+            break;
+        }
+    }
+
+    if (not_found) {
+        return ESP_ERR_NOT_FOUND;
+    }
+
+    return ESP_OK;
+}
+
+esp_err_t esp_ota_erase_last_boot_app_partition(void)
+{
+    esp_ota_select_entry_t otadata[2];
+    const esp_partition_t* ota_data_partition = read_otadata(otadata);
+    if (ota_data_partition == NULL) {
+        return ESP_FAIL;
+    }
+
+    int active_otadata = bootloader_common_get_active_otadata(otadata);
+    int ota_app_count = get_ota_partition_count();
+    if (active_otadata == -1 || ota_app_count == 0) {
+        return ESP_FAIL;
+    }
+
+    int inactive_otadata = (~active_otadata)&1;
+    if (otadata[inactive_otadata].ota_seq == UINT32_MAX || otadata[inactive_otadata].crc != bootloader_common_ota_select_crc(&otadata[inactive_otadata])) {
+        return ESP_FAIL;
+    }
+
+    int ota_slot = (otadata[inactive_otadata].ota_seq - 1) % ota_app_count; // Actual OTA partition selection
+    ESP_LOGD(TAG, "finding last_boot_app_partition ota_%d app...", ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot);
+
+    const esp_partition_t* last_boot_app_partition_from_otadata = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_MIN + ota_slot, NULL);
+    if (last_boot_app_partition_from_otadata == NULL) {
+        return ESP_FAIL;
+    }
+
+    const esp_partition_t* running_partition = esp_ota_get_running_partition();
+    if (running_partition == NULL || last_boot_app_partition_from_otadata == running_partition) {
+        return ESP_FAIL;
+    }
+
+    esp_err_t err = esp_partition_erase_range(last_boot_app_partition_from_otadata, 0, last_boot_app_partition_from_otadata->size);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    int sec_id = inactive_otadata;
+    err = esp_partition_erase_range(ota_data_partition, sec_id * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
+    if (err != ESP_OK) {
+        return err;
+    }
+
+    return ESP_OK;
+}

components/app_update/include/esp_ota_ops.h

@@ -20,6 +20,8 @@
 #include <stddef.h>
 #include "esp_err.h"
 #include "esp_partition.h"
+#include "esp_image_format.h"
+#include "esp_flash_partitions.h"
 
 #ifdef __cplusplus
 extern "C"
@@ -32,6 +34,10 @@ extern "C"
 #define ESP_ERR_OTA_PARTITION_CONFLICT           (ESP_ERR_OTA_BASE + 0x01)  /*!< Error if request was to write or erase the current running partition */
 #define ESP_ERR_OTA_SELECT_INFO_INVALID          (ESP_ERR_OTA_BASE + 0x02)  /*!< Error if OTA data partition contains invalid content */
 #define ESP_ERR_OTA_VALIDATE_FAILED              (ESP_ERR_OTA_BASE + 0x03)  /*!< Error if OTA app image is invalid */
+#define ESP_ERR_OTA_SMALL_SEC_VER                (ESP_ERR_OTA_BASE + 0x04)  /*!< Error if the firmware has a secure version less than the running firmware. */
+#define ESP_ERR_OTA_ROLLBACK_FAILED              (ESP_ERR_OTA_BASE + 0x05)  /*!< Error if flash does not have valid firmware in passive partition and hence rollback is not possible */
+#define ESP_ERR_OTA_ROLLBACK_INVALID_STATE       (ESP_ERR_OTA_BASE + 0x06)  /*!< Error if current active firmware is still marked in pending validation state (ESP_OTA_IMG_PENDING_VERIFY), essentially first boot of firmware image post upgrade and hence firmware upgrade is not possible */
+
 
 /**
  * @brief Opaque handle for an application OTA update
@@ -41,6 +47,24 @@ extern "C"
  */
 typedef uint32_t esp_ota_handle_t;
 
+/**
+ * @brief   Return esp_app_desc structure. This structure includes app version.
+ * 
+ * Return description for running app.
+ * @return Pointer to esp_app_desc structure.
+ */
+const esp_app_desc_t *esp_ota_get_app_description(void);
+
+/**
+ * @brief   Fill the provided buffer with SHA256 of the ELF file, formatted as hexadecimal, null-terminated.
+ * If the buffer size is not sufficient to fit the entire SHA256 in hex plus a null terminator,
+ * the largest possible number of bytes will be written followed by a null.
+ * @param dst   Destination buffer
+ * @param size  Size of the buffer
+ * @return      Number of bytes written to dst (including null terminator)
+ */
+int esp_ota_get_app_elf_sha256(char* dst, size_t size);
+
 /**
  * @brief   Commence an OTA update writing to the specified partition.
 
@@ -52,6 +76,10 @@ typedef uint32_t esp_ota_handle_t;
  * On success, this function allocates memory that remains in use
  * until esp_ota_end() is called with the returned handle.
  *
+ * Note: If the rollback option is enabled and the running application has the ESP_OTA_IMG_PENDING_VERIFY state then
+ * it will lead to the ESP_ERR_OTA_ROLLBACK_INVALID_STATE error. Confirm the running app before to run download a new app,
+ * use esp_ota_mark_app_valid_cancel_rollback() function for it (this should be done as early as possible when you first download a new application).
+ *
  * @param partition Pointer to info for partition which will receive the OTA update. Required.
  * @param image_size Size of new OTA app image. Partition will be erased in order to receive this size of image. If 0 or OTA_SIZE_UNKNOWN, the entire partition is erased.
  * @param out_handle On success, returns a handle which should be used for subsequent esp_ota_write() and esp_ota_end() calls.
@@ -65,6 +93,7 @@ typedef uint32_t esp_ota_handle_t;
  *    - ESP_ERR_OTA_SELECT_INFO_INVALID: The OTA data partition contains invalid data.
  *    - ESP_ERR_INVALID_SIZE: Partition doesn't fit in configured flash size.
  *    - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
+ *    - ESP_ERR_OTA_ROLLBACK_INVALID_STATE: If the running app has not confirmed state. Before performing an update, the application must be valid.
  */
 esp_err_t esp_ota_begin(const esp_partition_t* partition, size_t image_size, esp_ota_handle_t* out_handle);
 
@@ -170,6 +199,83 @@ const esp_partition_t* esp_ota_get_running_partition(void);
  */
 const esp_partition_t* esp_ota_get_next_update_partition(const esp_partition_t *start_from);
 
+/**
+ * @brief Returns esp_app_desc structure for app partition. This structure includes app version.
+ * 
+ * Returns a description for the requested app partition.
+ * @param[in] partition     Pointer to app partition. (only app partition)
+ * @param[out] app_desc     Structure of info about app.
+ * @return
+ *  - ESP_OK                Successful.
+ *  - ESP_ERR_NOT_FOUND     app_desc structure is not found. Magic word is incorrect.
+ *  - ESP_ERR_NOT_SUPPORTED Partition is not application.
+ *  - ESP_ERR_INVALID_ARG   Arguments is NULL or if partition's offset exceeds partition size.
+ *  - ESP_ERR_INVALID_SIZE  Read would go out of bounds of the partition.
+ *  - or one of error codes from lower-level flash driver.
+ */
+esp_err_t esp_ota_get_partition_description(const esp_partition_t *partition, esp_app_desc_t *app_desc);
+
+/**
+ * @brief This function is called to indicate that the running app is working well.
+ *
+ * @return
+ *  - ESP_OK: if successful.
+ */
+esp_err_t esp_ota_mark_app_valid_cancel_rollback(void);
+
+/**
+ * @brief This function is called to roll back to the previously workable app with reboot.
+ *
+ * If rollback is successful then device will reset else API will return with error code.
+ * Checks applications on a flash drive that can be booted in case of rollback.
+ * If the flash does not have at least one app (except the running app) then rollback is not possible.
+ * @return
+ *  - ESP_FAIL: if not successful.
+ *  - ESP_ERR_OTA_ROLLBACK_FAILED: The rollback is not possible due to flash does not have any apps.
+ */
+esp_err_t esp_ota_mark_app_invalid_rollback_and_reboot(void);
+
+/**
+ * @brief Returns last partition with invalid state (ESP_OTA_IMG_INVALID or ESP_OTA_IMG_ABORTED).
+ *
+ * @return partition.
+ */
+const esp_partition_t* esp_ota_get_last_invalid_partition(void);
+
+/**
+ * @brief Returns state for given partition.
+ *
+ * @param[in] partition  Pointer to partition.
+ * @param[out] ota_state state of partition (if this partition has a record in otadata).
+ * @return
+ *        - ESP_OK:                 Successful.
+ *        - ESP_ERR_INVALID_ARG:    partition or ota_state arguments were NULL.
+ *        - ESP_ERR_NOT_SUPPORTED:  partition is not ota.
+ *        - ESP_ERR_NOT_FOUND:      Partition table does not have otadata or state was not found for given partition.
+ */
+esp_err_t esp_ota_get_state_partition(const esp_partition_t *partition, esp_ota_img_states_t *ota_state);
+
+/**
+ * @brief Erase previous boot app partition and corresponding otadata select for this partition.
+ *
+ * When current app is marked to as valid then you can erase previous app partition.
+ * @return
+ *        - ESP_OK:   Successful, otherwise ESP_ERR.
+ */
+esp_err_t esp_ota_erase_last_boot_app_partition(void);
+
+/**
+ * @brief Checks applications on the slots which can be booted in case of rollback.
+ *
+ * These applications should be valid (marked in otadata as not UNDEFINED, INVALID or ABORTED and crc is good) and be able booted,
+ * and secure_version of app >= secure_version of efuse (if anti-rollback is enabled).
+ *
+ * @return
+ *        - True: Returns true if the slots have at least one app (except the running app).
+ *        - False: The rollback is not possible.
+ */
+bool esp_ota_check_rollback_is_possible(void);
+
 #ifdef __cplusplus
 }
 #endif

components/app_update/otatool.py

@@ -0,0 +1,388 @@
+#!/usr/bin/env python
+#
+# otatool is used to perform ota-level operations - flashing ota partition
+# erasing ota partition and switching ota partition
+#
+# Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http:#www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+from __future__ import print_function, division
+import argparse
+import os
+import sys
+import binascii
+import tempfile
+import collections
+import struct
+
+try:
+    from parttool import PartitionName, PartitionType, ParttoolTarget, PARTITION_TABLE_OFFSET
+except ImportError:
+    COMPONENTS_PATH = os.path.expandvars(os.path.join("$IDF_PATH", "components"))
+    PARTTOOL_DIR = os.path.join(COMPONENTS_PATH, "partition_table")
+
+    sys.path.append(PARTTOOL_DIR)
+    from parttool import PartitionName, PartitionType, ParttoolTarget, PARTITION_TABLE_OFFSET
+
+__version__ = '2.0'
+
+SPI_FLASH_SEC_SIZE = 0x2000
+
+quiet = False
+
+
+def status(msg):
+    if not quiet:
+        print(msg)
+
+
+class OtatoolTarget():
+
+    OTADATA_PARTITION = PartitionType("data", "ota")
+
+    def __init__(self, port=None, baud=None, partition_table_offset=PARTITION_TABLE_OFFSET, partition_table_file=None,
+                 spi_flash_sec_size=SPI_FLASH_SEC_SIZE, esptool_args=[], esptool_write_args=[],
+                 esptool_read_args=[], esptool_erase_args=[]):
+        self.target = ParttoolTarget(port, baud, partition_table_offset, partition_table_file, esptool_args,
+                                     esptool_write_args, esptool_read_args, esptool_erase_args)
+        self.spi_flash_sec_size = spi_flash_sec_size
+
+        temp_file = tempfile.NamedTemporaryFile(delete=False)
+        temp_file.close()
+        try:
+            self.target.read_partition(OtatoolTarget.OTADATA_PARTITION, temp_file.name)
+            with open(temp_file.name, "rb") as f:
+                self.otadata = f.read()
+        except Exception:
+            self.otadata = None
+        finally:
+            os.unlink(temp_file.name)
+
+    def _check_otadata_partition(self):
+        if not self.otadata:
+            raise Exception("No otadata partition found")
+
+    def erase_otadata(self):
+        self._check_otadata_partition()
+        self.target.erase_partition(OtatoolTarget.OTADATA_PARTITION)
+
+    def _get_otadata_info(self):
+        info = []
+
+        otadata_info = collections.namedtuple("otadata_info", "seq crc")
+
+        for i in range(2):
+            start = i * (self.spi_flash_sec_size >> 1)
+
+            seq = bytearray(self.otadata[start:start + 4])
+            crc = bytearray(self.otadata[start + 28:start + 32])
+
+            seq = struct.unpack('>I', seq)
+            crc = struct.unpack('>I', crc)
+
+            info.append(otadata_info(seq[0], crc[0]))
+
+        return info
+
+    def _get_partition_id_from_ota_id(self, ota_id):
+        if isinstance(ota_id, int):
+            return PartitionType("app", "ota_" + str(ota_id))
+        else:
+            return PartitionName(ota_id)
+
+    def switch_ota_partition(self, ota_id):
+        self._check_otadata_partition()
+
+        sys.path.append(PARTTOOL_DIR)
+        import gen_esp32part as gen
+
+        def is_otadata_info_valid(status):
+            seq = status.seq % (1 << 32)
+            crc = hex(binascii.crc32(struct.pack("I", seq), 0xFFFFFFFF) % (1 << 32))
+            return seq < (int('0xFFFFFFFF', 16) % (1 << 32)) and status.crc == crc
+
+        partition_table = self.target.partition_table
+
+        ota_partitions = list()
+
+        for i in range(gen.NUM_PARTITION_SUBTYPE_APP_OTA):
+            ota_partition = filter(lambda p: p.subtype == (gen.MIN_PARTITION_SUBTYPE_APP_OTA + i), partition_table)
+
+            try:
+                ota_partitions.append(list(ota_partition)[0])
+            except IndexError:
+                break
+
+        ota_partitions = sorted(ota_partitions, key=lambda p: p.subtype)
+
+        if not ota_partitions:
+            raise Exception("No ota app partitions found")
+
+        # Look for the app partition to switch to
+        ota_partition_next = None
+
+        try:
+            if isinstance(ota_id, int):
+                ota_partition_next = filter(lambda p: p.subtype - gen.MIN_PARTITION_SUBTYPE_APP_OTA  == ota_id, ota_partitions)
+            else:
+                ota_partition_next = filter(lambda p: p.name == ota_id, ota_partitions)
+
+            ota_partition_next = list(ota_partition_next)[0]
+        except IndexError:
+            raise Exception("Partition to switch to not found")
+
+        otadata_info = self._get_otadata_info()
+
+        # Find the copy to base the computation for ota sequence number on
+        otadata_compute_base = -1
+
+        # Both are valid, take the max as computation base
+        if is_otadata_info_valid(otadata_info[0]) and is_otadata_info_valid(otadata_info[1]):
+            if otadata_info[0].seq >= otadata_info[1].seq:
+                otadata_compute_base = 0
+            else:
+                otadata_compute_base = 1
+        # Only one copy is valid, use that
+        elif is_otadata_info_valid(otadata_info[0]):
+            otadata_compute_base = 0
+        elif is_otadata_info_valid(otadata_info[1]):
+            otadata_compute_base = 1
+        # Both are invalid (could be initial state - all 0xFF's)
+        else:
+            pass
+
+        ota_seq_next = 0
+        ota_partitions_num = len(ota_partitions)
+
+        target_seq = (ota_partition_next.subtype & 0x0F) + 1
+
+        # Find the next ota sequence number
+        if otadata_compute_base == 0 or otadata_compute_base == 1:
+            base_seq = otadata_info[otadata_compute_base].seq % (1 << 32)
+
+            i = 0
+            while base_seq > target_seq % ota_partitions_num + i * ota_partitions_num:
+                i += 1
+
+            ota_seq_next = target_seq % ota_partitions_num + i * ota_partitions_num
+        else:
+            ota_seq_next = target_seq
+
+        # Create binary data from computed values
+        ota_seq_next = struct.pack("I", ota_seq_next)
+        ota_seq_crc_next = binascii.crc32(ota_seq_next, 0xFFFFFFFF) % (1 << 32)
+        ota_seq_crc_next = struct.pack("I", ota_seq_crc_next)
+
+        temp_file = tempfile.NamedTemporaryFile(delete=False)
+        temp_file.close()
+
+        try:
+            with open(temp_file.name, "wb") as otadata_next_file:
+                start = (1 if otadata_compute_base == 0 else 0) * (self.spi_flash_sec_size >> 1)
+
+                otadata_next_file.write(self.otadata)
+
+                otadata_next_file.seek(start)
+                otadata_next_file.write(ota_seq_next)
+
+                otadata_next_file.seek(start + 28)
+                otadata_next_file.write(ota_seq_crc_next)
+
+                otadata_next_file.flush()
+
+            self.target.write_partition(OtatoolTarget.OTADATA_PARTITION, temp_file.name)
+        finally:
+            os.unlink(temp_file.name)
+
+    def read_ota_partition(self, ota_id, output):
+        self.target.read_partition(self._get_partition_id_from_ota_id(ota_id), output)
+
+    def write_ota_partition(self, ota_id, input):
+        self.target.write_partition(self._get_partition_id_from_ota_id(ota_id), input)
+
+    def erase_ota_partition(self, ota_id):
+        self.target.erase_partition(self._get_partition_id_from_ota_id(ota_id))
+
+
+def _read_otadata(target):
+    target._check_otadata_partition()
+
+    otadata_info = target._get_otadata_info()
+
+    print("             {:8s} \t  {:8s} | \t  {:8s} \t   {:8s}".format("OTA_SEQ", "CRC", "OTA_SEQ", "CRC"))
+    print("Firmware:  0x{:8x} \t0x{:8x} | \t0x{:8x} \t 0x{:8x}".format(otadata_info[0].seq, otadata_info[0].crc,
+          otadata_info[1].seq, otadata_info[1].crc))
+
+
+def _erase_otadata(target):
+    target.erase_otadata()
+    status("Erased ota_data partition contents")
+
+
+def _switch_ota_partition(target, ota_id):
+    target.switch_ota_partition(ota_id)
+
+
+def _read_ota_partition(target, ota_id, output):
+    target.read_ota_partition(ota_id, output)
+    status("Read ota partition contents to file {}".format(output))
+
+
+def _write_ota_partition(target, ota_id, input):
+    target.write_ota_partition(ota_id, input)
+    status("Written contents of file {} to ota partition".format(input))
+
+
+def _erase_ota_partition(target, ota_id):
+    target.erase_ota_partition(ota_id)
+    status("Erased contents of ota partition")
+
+
+def main():
+    global quiet
+
+    parser = argparse.ArgumentParser("ESP-IDF OTA Partitions Tool")
+
+    parser.add_argument("--quiet", "-q", help="suppress stderr messages", action="store_true")
+    parser.add_argument("--esptool-args", help="additional main arguments for esptool", nargs="+")
+    parser.add_argument("--esptool-write-args", help="additional subcommand arguments for esptool write_flash", nargs="+")
+    parser.add_argument("--esptool-read-args", help="additional subcommand arguments for esptool read_flash", nargs="+")
+    parser.add_argument("--esptool-erase-args", help="additional subcommand arguments for esptool erase_region", nargs="+")
+
+    # There are two possible sources for the partition table: a device attached to the host
+    # or a partition table CSV/binary file. These sources are mutually exclusive.
+    parser.add_argument("--port", "-p", help="port where the device to read the partition table from is attached")
+
+    parser.add_argument("--baud", "-b", help="baudrate to use", type=int)
+
+    parser.add_argument("--partition-table-offset", "-o", help="offset to read the partition table from",  type=str)
+
+    parser.add_argument("--partition-table-file", "-f", help="file (CSV/binary) to read the partition table from; \
+                                                            overrides device attached to specified port as the partition table source when defined")
+
+    subparsers = parser.add_subparsers(dest="operation", help="run otatool -h for additional help")
+
+    spi_flash_sec_size = argparse.ArgumentParser(add_help=False)
+    spi_flash_sec_size.add_argument("--spi-flash-sec-size", help="value of SPI_FLASH_SEC_SIZE macro", type=str)
+
+    # Specify the supported operations
+    subparsers.add_parser("read_otadata", help="read otadata partition", parents=[spi_flash_sec_size])
+    subparsers.add_parser("erase_otadata", help="erase otadata partition")
+
+    slot_or_name_parser = argparse.ArgumentParser(add_help=False)
+    slot_or_name_parser_args = slot_or_name_parser.add_mutually_exclusive_group()
+    slot_or_name_parser_args.add_argument("--slot", help="slot number of the ota partition", type=int)
+    slot_or_name_parser_args.add_argument("--name", help="name of the ota partition")
+
+    subparsers.add_parser("switch_ota_partition", help="switch otadata partition", parents=[slot_or_name_parser, spi_flash_sec_size])
+
+    read_ota_partition_subparser = subparsers.add_parser("read_ota_partition", help="read contents of an ota partition", parents=[slot_or_name_parser])
+    read_ota_partition_subparser.add_argument("--output", help="file to write the contents of the ota partition to")
+
+    write_ota_partition_subparser = subparsers.add_parser("write_ota_partition", help="write contents to an ota partition", parents=[slot_or_name_parser])
+    write_ota_partition_subparser.add_argument("--input", help="file whose contents to write to the ota partition")
+
+    subparsers.add_parser("erase_ota_partition", help="erase contents of an ota partition", parents=[slot_or_name_parser])
+
+    args = parser.parse_args()
+
+    quiet = args.quiet
+
+    # No operation specified, display help and exit
+    if args.operation is None:
+        if not quiet:
+            parser.print_help()
+        sys.exit(1)
+
+    target_args = {}
+
+    if args.port:
+        target_args["port"] = args.port
+
+    if args.partition_table_file:
+        target_args["partition_table_file"] = args.partition_table_file
+
+    if args.partition_table_offset:
+        target_args["partition_table_offset"] = int(args.partition_table_offset, 0)
+
+    try:
+        if args.spi_flash_sec_size:
+            target_args["spi_flash_sec_size"] = int(args.spi_flash_sec_size, 0)
+    except AttributeError:
+        pass
+
+    if args.esptool_args:
+        target_args["esptool_args"] = args.esptool_args
+
+    if args.esptool_write_args:
+        target_args["esptool_write_args"] = args.esptool_write_args
+
+    if args.esptool_read_args:
+        target_args["esptool_read_args"] = args.esptool_read_args
+
+    if args.esptool_erase_args:
+        target_args["esptool_erase_args"] = args.esptool_erase_args
+
+    if args.baud:
+        target_args["baud"] = args.baud
+
+    target = OtatoolTarget(**target_args)
+
+    # Create the operation table and execute the operation
+    common_args = {'target':target}
+
+    ota_id = []
+
+    try:
+        if args.name is not None:
+            ota_id = ["name"]
+        else:
+            if args.slot is not None:
+                ota_id = ["slot"]
+    except AttributeError:
+        pass
+
+    otatool_ops = {
+        'read_otadata':(_read_otadata, []),
+        'erase_otadata':(_erase_otadata, []),
+        'switch_ota_partition':(_switch_ota_partition, ota_id),
+        'read_ota_partition':(_read_ota_partition, ["output"] + ota_id),
+        'write_ota_partition':(_write_ota_partition, ["input"] + ota_id),
+        'erase_ota_partition':(_erase_ota_partition, ota_id)
+    }
+
+    (op, op_args) = otatool_ops[args.operation]
+
+    for op_arg in op_args:
+        common_args.update({op_arg:vars(args)[op_arg]})
+
+    try:
+        common_args['ota_id'] = common_args.pop('name')
+    except KeyError:
+        try:
+            common_args['ota_id'] = common_args.pop('slot')
+        except KeyError:
+            pass
+
+    if quiet:
+        # If exceptions occur, suppress and exit quietly
+        try:
+            op(**common_args)
+        except Exception:
+            sys.exit(2)
+    else:
+        op(**common_args)
+
+
+if __name__ == '__main__':
+    main()

components/app_update/project_include.cmake

@@ -1,8 +0,0 @@
-
-# Set empty otadata partition file for flashing, if OTA data partition in
-# partition table
-# (NB: because of component dependency, we know partition_table
-# project_include.cmake has already been included.)
-if(${OTADATA_PARTITION_OFFSET})
-    set(BLANK_OTADATA_FILE "ota_data_initial.bin")
-endif()

components/app_update/test/CMakeLists.txt

@@ -1,6 +1,4 @@
-set(COMPONENT_SRCDIRS ".")
-set(COMPONENT_ADD_INCLUDEDIRS ".")
-
-set(COMPONENT_REQUIRES unity app_update bootloader_support nvs_flash)
-
-register_component()
+idf_component_register(SRC_DIRS "."
+                       INCLUDE_DIRS "."
+                       REQUIRES unity test_utils app_update bootloader_support nvs_flash
+                      )

components/app_update/test/test_app_desc.c

@@ -0,0 +1,50 @@
+#include <string.h>
+#include "esp_ota_ops.h"
+#include "unity.h"
+
+TEST_CASE("esp_ota_get_app_elf_sha256 test", "[esp_app_desc]")
+{
+    const int sha256_hex_len = 64;
+    char dst[sha256_hex_len + 2];
+    const char fill = 0xcc;
+    int res;
+    size_t len;
+
+    char ref_sha256[sha256_hex_len + 1];
+    const esp_app_desc_t* desc = esp_ota_get_app_description();
+    for (int i = 0; i < sizeof(ref_sha256) / 2; ++i) {
+        snprintf(ref_sha256 + 2*i, 3, "%02x", desc->app_elf_sha256[i]);
+    }
+    ref_sha256[sha256_hex_len] = 0;
+
+    printf("Ref: %s\n", ref_sha256);
+
+    memset(dst, fill, sizeof(dst));
+    len = sizeof(dst);
+    res = esp_ota_get_app_elf_sha256(dst, len);
+    printf("%d: %s (%d)\n", len, dst, res);
+    TEST_ASSERT_EQUAL(sha256_hex_len + 1, res);
+    TEST_ASSERT_EQUAL(0, memcmp(dst, ref_sha256, res - 1));
+    TEST_ASSERT_EQUAL_HEX(0, dst[sha256_hex_len]);
+    TEST_ASSERT_EQUAL_HEX(fill, dst[sha256_hex_len + 1]);
+
+    memset(dst, fill, sizeof(dst));
+    len = 9;
+    res = esp_ota_get_app_elf_sha256(dst, len);
+    printf("%d: %s (%d)\n", len, dst, res);
+    TEST_ASSERT_EQUAL(9, res);
+    TEST_ASSERT_EQUAL(0, memcmp(dst, ref_sha256, res - 1));
+    TEST_ASSERT_EQUAL_HEX(0, dst[8]);
+    TEST_ASSERT_EQUAL_HEX(fill, dst[9]);
+
+    memset(dst, fill, sizeof(dst));
+    len = 8;
+    res = esp_ota_get_app_elf_sha256(dst, len);
+    printf("%d: %s (%d)\n", len, dst, res);
+    // should output even number of characters plus '\0'
+    TEST_ASSERT_EQUAL(7, res);
+    TEST_ASSERT_EQUAL(0, memcmp(dst, ref_sha256, res - 1));
+    TEST_ASSERT_EQUAL_HEX(0, dst[6]);
+    TEST_ASSERT_EQUAL_HEX(fill, dst[7]);
+    TEST_ASSERT_EQUAL_HEX(fill, dst[8]);
+}

components/app_update/test/test_ota_ops.c

@@ -8,7 +8,7 @@
 #include <unity.h>
 #include <test_utils.h>
 #include <esp_ota_ops.h>
-
+#include "bootloader_common.h"
 
 /* These OTA tests currently don't assume an OTA partition exists
    on the device, so they're a bit limited
@@ -58,7 +58,7 @@ TEST_CASE("esp_ota_get_next_update_partition logic", "[ota]")
     TEST_ASSERT_NOT_NULL(ota_1);
     TEST_ASSERT_NULL(ota_2); /* this partition shouldn't exist in test partition table */
 
-    TEST_ASSERT_EQUAL_PTR(factory, running); /* this may not be true if/when we get OTA tests that do OTA updates */ 
+    TEST_ASSERT_EQUAL_PTR(factory, running); /* this may not be true if/when we get OTA tests that do OTA updates */
 
     /* (The test steps verify subtypes before verifying pointer equality, because the failure messages are more readable
        this way.)
@@ -84,3 +84,26 @@ TEST_CASE("esp_ota_get_next_update_partition logic", "[ota]")
     TEST_ASSERT_EQUAL_PTR(ota_0, p);
 }
 
+TEST_CASE("esp_ota_get_partition_description ", "[ota]")
+{
+    const esp_partition_t *running = esp_ota_get_running_partition();
+    TEST_ASSERT_NOT_NULL(running);
+    esp_app_desc_t app_desc1, app_desc2;
+    TEST_ESP_OK(esp_ota_get_partition_description(running, &app_desc1));
+    const esp_partition_pos_t running_pos = {
+            .offset = running->address,
+            .size = running->size
+    };
+    TEST_ESP_OK(bootloader_common_get_partition_description(&running_pos, &app_desc2));
+
+    TEST_ASSERT_EQUAL_MEMORY_MESSAGE((uint8_t *)&app_desc1, (uint8_t *)&app_desc2, sizeof(app_desc1), "must be the same");
+
+    const esp_partition_t *not_app = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
+    TEST_ASSERT_NOT_NULL(not_app);
+    TEST_ESP_ERR(ESP_ERR_NOT_SUPPORTED, esp_ota_get_partition_description(not_app, &app_desc1));
+    const esp_partition_pos_t not_app_pos = {
+            .offset = not_app->address,
+            .size = not_app->size
+    };
+    TEST_ESP_ERR(ESP_ERR_NOT_FOUND, bootloader_common_get_partition_description(&not_app_pos, &app_desc1));
+}

components/app_update/test/test_switch_ota.c

@@ -5,10 +5,15 @@
 #include <esp_types.h>
 #include <stdio.h>
 #include "string.h"
+#include "sdkconfig.h"
 
-#include "rom/spi_flash.h"
-#include "rom/rtc.h"
-#include "rom/ets_sys.h"
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/spi_flash.h"
+#include "esp32/rom/rtc.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/spi_flash.h"
+#include "esp32s2beta/rom/rtc.h"
+#endif
 
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
@@ -28,8 +33,8 @@
 #include "nvs_flash.h"
 
 #include "driver/gpio.h"
+#include "esp_sleep.h"
 
-#include "sdkconfig.h"
 
 RTC_DATA_ATTR static int boot_count = 0;
 static const char *TAG = "ota_test";
@@ -117,7 +122,7 @@ static void reboot_as_deep_sleep(void)
 
 /* @brief Copies a current app to next partition (OTA0-15), after that ESP is rebooting and run this (the next) OTAx.
  */
-static void copy_current_app_to_next_part_and_reboot()
+static void copy_current_app_to_next_part_and_reboot(void)
 {
     const esp_partition_t *cur_app = esp_ota_get_running_partition();
     copy_current_app_to_next_part(cur_app, get_next_update_partition());
@@ -237,6 +242,12 @@ static void reset_output_pin(uint32_t num_pin)
 }
 #endif
 
+static void mark_app_valid(void)
+{
+#ifdef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+    TEST_ESP_OK(esp_ota_mark_app_valid_cancel_rollback());
+#endif
+}
 
 /* @brief Checks and prepares the partition so that the factory app is launched after that.
  */
@@ -257,20 +268,23 @@ static void test_flow1(void)
         case 2:
             ESP_LOGI(TAG, "Factory");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 3:
             ESP_LOGI(TAG, "OTA0");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            mark_app_valid();
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 4:
             ESP_LOGI(TAG, "OTA1");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_1, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            mark_app_valid();
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 5:
             ESP_LOGI(TAG, "OTA0");
+            mark_app_valid();
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
             erase_ota_data();
             break;
@@ -286,7 +300,7 @@ static void test_flow1(void)
 // 3 Stage: run OTA0    -> check it -> copy OTA0 to OTA1                -> reboot  --//--
 // 4 Stage: run OTA1    -> check it -> copy OTA1 to OTA0                -> reboot  --//--
 // 5 Stage: run OTA0    -> check it -> erase OTA_DATA for next tests    -> PASS
-TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, OTA1, OTA0", "[app_update][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow1, test_flow1, test_flow1, test_flow1);
+TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, OTA1, OTA0", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow1, test_flow1, test_flow1, test_flow1);
 
 static void test_flow2(void)
 {
@@ -297,11 +311,12 @@ static void test_flow2(void)
         case 2:
             ESP_LOGI(TAG, "Factory");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 3:
             ESP_LOGI(TAG, "OTA0");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+            mark_app_valid();
             copy_current_app_to_next_part(cur_app, get_next_update_partition());
             corrupt_ota_data(CORR_CRC_1_SECTOR_OTA_DATA);
             reboot_as_deep_sleep();
@@ -322,7 +337,7 @@ static void test_flow2(void)
 // 2 Stage: run factory -> check it -> copy factory to OTA0             -> reboot  --//--
 // 3 Stage: run OTA0    -> check it -> corrupt ota data                 -> reboot  --//--
 // 4 Stage: run factory -> check it -> erase OTA_DATA for next tests    -> PASS
-TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, corrupt ota_sec1, factory", "[app_update][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow2, test_flow2, test_flow2);
+TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, corrupt ota_sec1, factory", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow2, test_flow2, test_flow2);
 
 static void test_flow3(void)
 {
@@ -333,16 +348,18 @@ static void test_flow3(void)
         case 2:
             ESP_LOGI(TAG, "Factory");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 3:
             ESP_LOGI(TAG, "OTA0");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            mark_app_valid();
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 4:
             ESP_LOGI(TAG, "OTA1");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_1, cur_app->subtype);
+            mark_app_valid();
             copy_current_app_to_next_part(cur_app, get_next_update_partition());
             corrupt_ota_data(CORR_CRC_2_SECTOR_OTA_DATA);
             reboot_as_deep_sleep();
@@ -364,7 +381,7 @@ static void test_flow3(void)
 // 3 Stage: run OTA0    -> check it -> copy OTA0 to OTA1                -> reboot  --//--
 // 3 Stage: run OTA1    -> check it -> corrupt ota sector2              -> reboot  --//--
 // 4 Stage: run OTA0    -> check it -> erase OTA_DATA for next tests    -> PASS
-TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, OTA1, currupt ota_sec2, OTA0", "[app_update][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow3, test_flow3, test_flow3, test_flow3);
+TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, OTA1, currupt ota_sec2, OTA0", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow3, test_flow3, test_flow3, test_flow3);
 
 #ifdef CONFIG_BOOTLOADER_FACTORY_RESET
 #define STORAGE_NAMESPACE "update_ota"
@@ -374,7 +391,7 @@ static void test_flow4(void)
     boot_count++;
     ESP_LOGI(TAG, "boot count %d", boot_count);
     const esp_partition_t *cur_app = get_running_firmware();
-    nvs_handle handle = 0;
+    nvs_handle_t handle = 0;
     int boot_count_nvs = 0;
     switch (boot_count) {
         case 2:
@@ -389,12 +406,12 @@ static void test_flow4(void)
             nvs_close(handle);
             nvs_flash_deinit();
 
-            copy_current_app_to_next_part_and_reboot(cur_app);
+            copy_current_app_to_next_part_and_reboot();
             break;
         case 3:
             ESP_LOGI(TAG, "OTA0");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
-
+            mark_app_valid();
             TEST_ESP_OK(nvs_flash_init());
             TEST_ESP_OK(nvs_open(STORAGE_NAMESPACE, NVS_READWRITE, &handle));
             TEST_ESP_OK(nvs_get_i32(handle, "boot_count", &boot_count_nvs));
@@ -431,7 +448,7 @@ static void test_flow4(void)
 // 2 Stage: run factory -> check it -> copy factory to OTA0          -> reboot  --//--
 // 3 Stage: run OTA0    -> check it -> set_pin_factory_reset         -> reboot  --//--
 // 4 Stage: run factory -> check it -> erase OTA_DATA for next tests -> PASS
-TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, sets pin_factory_reset, factory", "[app_update][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow4, test_flow4, test_flow4);
+TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0, sets pin_factory_reset, factory", "[app_update][timeout=90][ignore][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow4, test_flow4, test_flow4);
 #endif
 
 #ifdef CONFIG_BOOTLOADER_APP_TEST
@@ -474,5 +491,247 @@ static void test_flow5(void)
 // 2 Stage: run factory    -> check it -> copy factory to Test and set pin_test_app -> reboot  --//--
 // 3 Stage: run test       -> check it -> reset pin_test_app                        -> reboot  --//--
 // 4 Stage: run factory    -> check it -> erase OTA_DATA for next tests             -> PASS
-TEST_CASE_MULTIPLE_STAGES("Switching between factory, test, factory", "[app_update][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow5, test_flow5, test_flow5);
+TEST_CASE_MULTIPLE_STAGES("Switching between factory, test, factory", "[app_update][timeout=90][ignore][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow5, test_flow5, test_flow5);
 #endif
+
+static const esp_partition_t* app_update(void)
+{
+    const esp_partition_t *cur_app = get_running_firmware();
+    const esp_partition_t* update_partition = esp_ota_get_next_update_partition(NULL);
+    TEST_ASSERT_NOT_NULL(update_partition);
+    esp_ota_handle_t update_handle = 0;
+    TEST_ESP_OK(esp_ota_begin(update_partition, OTA_SIZE_UNKNOWN, &update_handle));
+    copy_app_partition(update_handle, cur_app);
+    TEST_ESP_OK(esp_ota_end(update_handle));
+    TEST_ESP_OK(esp_ota_set_boot_partition(update_partition));
+    return update_partition;
+}
+
+
+static void test_rollback1(void)
+{
+    boot_count++;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    esp_ota_img_states_t ota_state = 0x5555AAAA;
+    const esp_partition_t* update_partition = NULL;
+    switch (boot_count) {
+        case 2:
+            ESP_LOGI(TAG, "Factory");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_ERR(ESP_ERR_NOT_SUPPORTED, esp_ota_get_state_partition(cur_app, &ota_state));
+            update_partition = app_update();
+            TEST_ESP_OK(esp_ota_get_state_partition(update_partition, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_NEW, ota_state);
+#endif
+            reboot_as_deep_sleep();
+            break;
+        case 3:
+            ESP_LOGI(TAG, "OTA0");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_PENDING_VERIFY, ota_state);
+#endif
+            TEST_ESP_OK(esp_ota_mark_app_valid_cancel_rollback());
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_VALID, ota_state);
+            reboot_as_deep_sleep();
+            break;
+        case 4:
+            ESP_LOGI(TAG, "OTA0");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_VALID, ota_state);
+            TEST_ESP_OK(esp_ota_mark_app_invalid_rollback_and_reboot());
+            break;
+        default:
+            erase_ota_data();
+            TEST_FAIL_MESSAGE("Unexpected stage");
+            break;
+    }
+}
+
+static void test_rollback1_1(void)
+{
+    boot_count = 5;
+    esp_ota_img_states_t ota_state = 0x5555AAAA;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    ESP_LOGI(TAG, "Factory");
+    TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
+
+    const esp_partition_t *invalid_partition = esp_ota_get_last_invalid_partition();
+    const esp_partition_t* next_update_partition = esp_ota_get_next_update_partition(NULL);
+    TEST_ASSERT_NOT_NULL(invalid_partition);
+    TEST_ASSERT_NOT_NULL(next_update_partition);
+    TEST_ASSERT_EQUAL_PTR(invalid_partition, next_update_partition);
+    TEST_ESP_ERR(ESP_ERR_NOT_SUPPORTED, esp_ota_get_state_partition(cur_app, &ota_state));
+    TEST_ESP_OK(esp_ota_get_state_partition(invalid_partition, &ota_state));
+    TEST_ASSERT_EQUAL(ESP_OTA_IMG_INVALID, ota_state);
+
+    erase_ota_data();
+}
+
+// 1 Stage: After POWER_RESET erase OTA_DATA for this test                          -> reboot through deep sleep.
+// 2 Stage: run factory    -> check it -> copy factory to next app slot             -> reboot  --//--
+// 3 Stage: run OTA0       -> check it -> esp_ota_mark_app_valid_cancel_rollback()                 -> reboot  --//--
+// 4 Stage: run OTA0       -> check it -> esp_ota_mark_app_invalid_rollback_and_reboot()         -> reboot
+// 5 Stage: run factory    -> check it -> erase OTA_DATA for next tests             -> PASS
+TEST_CASE_MULTIPLE_STAGES("Test rollback. factory, OTA0, OTA0, rollback -> factory", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, SW_CPU_RESET]", start_test, test_rollback1, test_rollback1, test_rollback1, test_rollback1_1);
+
+static void test_rollback2(void)
+{
+    boot_count++;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    esp_ota_img_states_t ota_state = 0x5555AAAA;
+    const esp_partition_t* update_partition = NULL;
+    switch (boot_count) {
+        case 2:
+            ESP_LOGI(TAG, "Factory");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_ERR(ESP_ERR_NOT_SUPPORTED, esp_ota_get_state_partition(cur_app, &ota_state));
+            update_partition = app_update();
+            TEST_ESP_OK(esp_ota_get_state_partition(update_partition, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_NEW, ota_state);
+#endif
+            reboot_as_deep_sleep();
+            break;
+        case 3:
+            ESP_LOGI(TAG, "OTA0");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_PENDING_VERIFY, ota_state);
+#endif
+            TEST_ESP_OK(esp_ota_mark_app_valid_cancel_rollback());
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_VALID, ota_state);
+            update_partition = app_update();
+            TEST_ESP_OK(esp_ota_get_state_partition(update_partition, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_NEW, ota_state);
+#endif
+            reboot_as_deep_sleep();
+            break;
+        case 4:
+            ESP_LOGI(TAG, "OTA1");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_1, cur_app->subtype);
+            TEST_ASSERT_NULL(esp_ota_get_last_invalid_partition());
+            TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_UNDEFINED, ota_state);
+            TEST_ESP_OK(esp_ota_mark_app_invalid_rollback_and_reboot());
+#else
+            TEST_ASSERT_EQUAL(ESP_OTA_IMG_PENDING_VERIFY, ota_state);
+            reboot_as_deep_sleep();
+#endif
+            break;
+        default:
+            erase_ota_data();
+            TEST_FAIL_MESSAGE("Unexpected stage");
+            break;
+    }
+}
+
+static void test_rollback2_1(void)
+{
+    boot_count = 5;
+    esp_ota_img_states_t ota_state = 0x5555AAAA;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    ESP_LOGI(TAG, "OTA0");
+    TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+
+    const esp_partition_t *invalid_partition = esp_ota_get_last_invalid_partition();
+    TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_1, invalid_partition->subtype);
+    const esp_partition_t* next_update_partition = esp_ota_get_next_update_partition(NULL);
+    TEST_ASSERT_NOT_NULL(invalid_partition);
+    TEST_ASSERT_NOT_NULL(next_update_partition);
+    TEST_ASSERT_EQUAL_PTR(invalid_partition, next_update_partition);
+    TEST_ESP_OK(esp_ota_get_state_partition(cur_app, &ota_state));
+    TEST_ASSERT_EQUAL(ESP_OTA_IMG_VALID, ota_state);
+    TEST_ESP_OK(esp_ota_get_state_partition(invalid_partition, &ota_state));
+#ifndef CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+    TEST_ASSERT_EQUAL(ESP_OTA_IMG_INVALID, ota_state);
+#else
+    TEST_ASSERT_EQUAL(ESP_OTA_IMG_ABORTED, ota_state);
+#endif
+    erase_ota_data();
+}
+
+// 1 Stage: After POWER_RESET erase OTA_DATA for this test                                     -> reboot through deep sleep.
+// 2 Stage: run factory        -> check it -> copy factory to next app slot                    -> reboot  --//--
+// 3 Stage: run OTA0           -> check it -> esp_ota_mark_app_valid_cancel_rollback(), copy to next app slot -> reboot  --//--
+// 4 Stage: run OTA1           -> check it -> PENDING_VERIFY/esp_ota_mark_app_invalid_rollback_and_reboot() -> reboot
+// 5 Stage: run OTA0(rollback) -> check it -> erase OTA_DATA for next tests                    -> PASS
+TEST_CASE_MULTIPLE_STAGES("Test rollback. factory, OTA0, OTA1, rollback -> OTA0", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, SW_CPU_RESET]", start_test, test_rollback2, test_rollback2, test_rollback2, test_rollback2_1);
+
+static void test_erase_last_app_flow(void)
+{
+    boot_count++;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    switch (boot_count) {
+        case 2:
+            ESP_LOGI(TAG, "Factory");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
+            app_update();
+            reboot_as_deep_sleep();
+            break;
+        case 3:
+            ESP_LOGI(TAG, "OTA0");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_0, cur_app->subtype);
+            mark_app_valid();
+            app_update();
+            reboot_as_deep_sleep();
+            break;
+        case 4:
+            ESP_LOGI(TAG, "OTA1");
+            TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_OTA_1, cur_app->subtype);
+            TEST_ESP_OK(esp_ota_erase_last_boot_app_partition());
+            TEST_ESP_OK(esp_ota_mark_app_invalid_rollback_and_reboot());
+            reboot_as_deep_sleep();
+            break;
+        default:
+            erase_ota_data();
+            TEST_FAIL_MESSAGE("Unexpected stage");
+            break;
+    }
+}
+
+static void test_erase_last_app_rollback(void)
+{
+    boot_count = 5;
+    ESP_LOGI(TAG, "boot count %d", boot_count);
+    const esp_partition_t *cur_app = get_running_firmware();
+    ESP_LOGI(TAG, "erase_last_app");
+    TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
+    TEST_ESP_ERR(ESP_FAIL, esp_ota_erase_last_boot_app_partition());
+    erase_ota_data();
+}
+
+// 1 Stage: After POWER_RESET erase OTA_DATA for this test                                     -> reboot through deep sleep.
+// 2 Stage: run factory        -> check it -> copy factory to OTA0                             -> reboot  --//--
+// 3 Stage: run OTA0           -> check it -> copy factory to OTA1                             -> reboot  --//--
+// 4 Stage: run OTA1           -> check it -> erase OTA0 and rollback                          -> reboot
+// 5 Stage: run factory        -> check it -> erase OTA_DATA for next tests                    -> PASS
+TEST_CASE_MULTIPLE_STAGES("Test erase_last_boot_app_partition. factory, OTA1, OTA0, factory", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET, DEEPSLEEP_RESET, SW_CPU_RESET]", start_test, test_erase_last_app_flow, test_erase_last_app_flow, test_erase_last_app_flow, test_erase_last_app_rollback);

components/asio/CMakeLists.txt

@@ -1,6 +1,3 @@
-set(COMPONENT_ADD_INCLUDEDIRS asio/asio/include port/include)
-set(COMPONENT_SRCS "asio/asio/src/asio.cpp")
-
-set(COMPONENT_REQUIRES lwip)
-
-register_component()
+idf_component_register(SRCS "asio/asio/src/asio.cpp"
+                    INCLUDE_DIRS "asio/asio/include" "port/include"
+                    REQUIRES lwip)

components/asio/port/include/esp_asio_config.h

@@ -18,12 +18,16 @@
 // Enabling exceptions only when they are enabled in menuconfig
 //
 # include <sdkconfig.h>
-# ifndef CONFIG_CXX_EXCEPTIONS
+# ifndef CONFIG_COMPILER_CXX_EXCEPTIONS
 #  define ASIO_NO_EXCEPTIONS
-# endif   // CONFIG_CXX_EXCEPTIONS
+# endif   // CONFIG_COMPILER_CXX_EXCEPTIONS
+
+# ifndef CONFIG_COMPILER_RTTI
+#  define ASIO_NO_TYPEID
+# endif   // CONFIG_COMPILER_RTTI
 
 //
-// LWIP compatifility inet and address macros/functions
+// LWIP compatibility inet and address macros/functions
 //
 # define LWIP_COMPAT_SOCKET_INET 1
 # define LWIP_COMPAT_SOCKET_ADDR 1
@@ -34,12 +38,6 @@
 # define ASIO_DISABLE_SERIAL_PORT
 # define ASIO_SEPARATE_COMPILATION
 # define ASIO_STANDALONE
-# define ASIO_NO_TYPEID
-# define ASIO_DISABLE_SIGNAL
 # define ASIO_HAS_PTHREADS
-# define ASIO_DISABLE_EPOLL
-# define ASIO_DISABLE_EVENTFD
-# define ASIO_DISABLE_SIGNAL
-# define ASIO_DISABLE_SIGACTION
 
 #endif // _ESP_ASIO_CONFIG_H_

components/asio/port/include/esp_exception.h

@@ -18,7 +18,7 @@
 //
 // This exception stub is enabled only if exceptions are disabled in menuconfig
 //
-#if !defined(CONFIG_CXX_EXCEPTIONS) && defined (ASIO_NO_EXCEPTIONS)
+#if !defined(CONFIG_COMPILER_CXX_EXCEPTIONS) && defined (ASIO_NO_EXCEPTIONS)
 
 #include "esp_log.h"
 
@@ -34,6 +34,6 @@ void throw_exception(const Exception& e)
   abort();
 }
 }}
-#endif // CONFIG_CXX_EXCEPTIONS==1 && defined (ASIO_NO_EXCEPTIONS)
+#endif // CONFIG_COMPILER_CXX_EXCEPTIONS==1 && defined (ASIO_NO_EXCEPTIONS)
 
 #endif // _ESP_EXCEPTION_H_

components/aws_iot/CMakeLists.txt

@@ -1,30 +0,0 @@
-if(CONFIG_AWS_IOT_SDK)
-    set(COMPONENT_ADD_INCLUDEDIRS "include aws-iot-device-sdk-embedded-C/include")
-    set(aws_sdk_dir aws-iot-device-sdk-embedded-C/src)
-    set(COMPONENT_SRCS "${aws_sdk_dir}/aws_iot_jobs_interface.c"
-                   "${aws_sdk_dir}/aws_iot_jobs_json.c"
-                   "${aws_sdk_dir}/aws_iot_jobs_topics.c"
-                   "${aws_sdk_dir}/aws_iot_jobs_types.c"
-                   "${aws_sdk_dir}/aws_iot_json_utils.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_common_internal.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_connect.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_publish.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_subscribe.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_unsubscribe.c"
-                   "${aws_sdk_dir}/aws_iot_mqtt_client_yield.c"
-                   "${aws_sdk_dir}/aws_iot_shadow.c"
-                   "${aws_sdk_dir}/aws_iot_shadow_actions.c"
-                   "${aws_sdk_dir}/aws_iot_shadow_json.c"
-                   "${aws_sdk_dir}/aws_iot_shadow_records.c"
-                   "port/network_mbedtls_wrapper.c"
-                   "port/threads_freertos.c"
-                   "port/timer.c")
-else()
-    message(STATUS "Building empty aws_iot component due to configuration")
-endif()
-
-set(COMPONENT_REQUIRES "mbedtls")
-set(COMPONENT_PRIV_REQUIRES "jsmn")
-
-register_component()

components/aws_iot/Kconfig

@@ -1,159 +0,0 @@
-menuconfig AWS_IOT_SDK
-    bool "Amazon Web Services IoT Platform"
-    help
-       Select this option to enable support for the AWS IoT platform,
-       via the esp-idf component for the AWS IoT Device C SDK.
-
-config AWS_IOT_MQTT_HOST
-    string "AWS IoT Endpoint Hostname"
-    depends on AWS_IOT_SDK
-    default ""
-    help
-        Default endpoint host name to connect to AWS IoT MQTT/S gateway
-
-        This is the custom endpoint hostname and is specific to an AWS
-        IoT account. You can find it by logging into your AWS IoT
-        Console and clicking the Settings button. The endpoint hostname
-        is shown under the "Custom Endpoint" heading on this page.
-
-        If you need per-device hostnames for different regions or
-        accounts, you can override the default hostname in your app.
-
-config AWS_IOT_MQTT_PORT
-    int "AWS IoT MQTT Port"
-    depends on AWS_IOT_SDK
-    default 8883
-    range 0 65535
-    help
-        Default port number to connect to AWS IoT MQTT/S gateway
-
-        If you need per-device port numbers for different regions, you can
-        override the default port number in your app.
-
-
-config AWS_IOT_MQTT_TX_BUF_LEN
-    int "MQTT TX Buffer Length"
-    depends on AWS_IOT_SDK
-    default 512
-    range 32 65536
-    help
-        Maximum MQTT transmit buffer size. This is the maximum MQTT
-        message length (including protocol overhead) which can be sent.
-
-        Sending longer messages will fail.
-
-config AWS_IOT_MQTT_RX_BUF_LEN
-    int "MQTT RX Buffer Length"
-    depends on AWS_IOT_SDK
-    default 512
-    range 32 65536
-    help
-        Maximum MQTT receive buffer size. This is the maximum MQTT
-        message length (including protocol overhead) which can be
-        received.
-
-        Longer messages are dropped.
-
-
-
-config AWS_IOT_MQTT_NUM_SUBSCRIBE_HANDLERS
-    int "Maximum MQTT Topic Filters"
-    depends on AWS_IOT_SDK
-    default 5
-    range 1 100
-    help
-        Maximum number of concurrent MQTT topic filters.
-
-
-config AWS_IOT_MQTT_MIN_RECONNECT_WAIT_INTERVAL
-    int "Auto reconnect initial interval (ms)"
-    depends on AWS_IOT_SDK
-    default 1000
-    range 10 3600000
-    help
-        Initial delay before making first reconnect attempt, if the AWS IoT connection fails.
-        Client will perform exponential backoff, starting from this value.
-
-config AWS_IOT_MQTT_MAX_RECONNECT_WAIT_INTERVAL
-    int "Auto reconnect maximum interval (ms)"
-    depends on AWS_IOT_SDK
-    default 128000
-    range 10 3600000
-    help
-        Maximum delay between reconnection attempts. If the exponentially increased delay
-        interval reaches this value, the client will stop automatically attempting to reconnect.
-
-menu "Thing Shadow"
-    depends on AWS_IOT_SDK
-
-config AWS_IOT_OVERRIDE_THING_SHADOW_RX_BUFFER
-    bool "Override Shadow RX buffer size"
-    depends on AWS_IOT_SDK
-    default n
-    help
-        Allows setting a different Thing Shadow RX buffer
-        size. This is the maximum size of a Thing Shadow
-        message in bytes, plus one.
-
-        If not overridden, the default value is the MQTT RX Buffer length plus one. If overriden, do not set higher than the default value.
-
-config AWS_IOT_SHADOW_MAX_SIZE_OF_RX_BUFFER
-    int "Maximum RX Buffer (bytes)"
-    depends on AWS_IOT_OVERRIDE_THING_SHADOW_RX_BUFFER
-    default 513
-    range 32 65536
-    help
-        Allows setting a different Thing Shadow RX buffer size.
-        This is the maximum size of a Thing Shadow message in bytes,
-        plus one.
-
-
-config AWS_IOT_SHADOW_MAX_SIZE_OF_UNIQUE_CLIENT_ID_BYTES
-    int "Maximum unique client ID size (bytes)"
-    depends on AWS_IOT_SDK
-    default 80
-    range 4 1000
-    help
-        Maximum size of the Unique Client Id.
-
-config AWS_IOT_SHADOW_MAX_SIMULTANEOUS_ACKS
-    int "Maximum simultaneous responses"
-    depends on AWS_IOT_SDK
-    default 10
-    range 1 100
-    help
-        At any given time we will wait for this many responses. This will correlate to the rate at which the shadow actions are requested
-
-config AWS_IOT_SHADOW_MAX_SIMULTANEOUS_THINGNAMES
-    int "Maximum simultaneous Thing Name operations"
-    depends on AWS_IOT_SDK
-    default 10
-    range 1 100
-    help
-       We could perform shadow action on any thing Name and this is maximum Thing Names we can act on at any given time
-
-config AWS_IOT_SHADOW_MAX_JSON_TOKEN_EXPECTED
-    int "Maximum expected JSON tokens"
-    depends on AWS_IOT_SDK
-    default 120
-    help
-        These are the max tokens that is expected to be in the Shadow JSON document. Includes the metadata which is published
-
-config AWS_IOT_SHADOW_MAX_SHADOW_TOPIC_LENGTH_WITHOUT_THINGNAME
-    int "Maximum topic length (not including Thing Name)"
-    depends on AWS_IOT_SDK
-    default 60
-    range 10 1000
-    help
-       All shadow actions have to be published or subscribed to a topic which is of the format $aws/things/{thingName}/shadow/update/accepted. This refers to the size of the topic without the Thing Name
-
-config AWS_IOT_SHADOW_MAX_SIZE_OF_THING_NAME
-    int "Maximum Thing Name length"
-    depends on AWS_IOT_SDK
-    default 20
-    range 4 1000
-    help
-        Maximum length of a Thing Name.
-
-endmenu  # Thing Shadow
-

components/aws_iot/component.mk

@@ -1,20 +0,0 @@
-#
-# Component Makefile
-#
-
-ifdef CONFIG_AWS_IOT_SDK
-
-COMPONENT_ADD_INCLUDEDIRS := include aws-iot-device-sdk-embedded-C/include
-
-COMPONENT_SRCDIRS := aws-iot-device-sdk-embedded-C/src port
-
-# Check the submodule is initialised
-COMPONENT_SUBMODULES := aws-iot-device-sdk-embedded-C
-
-
-else
-# Disable AWS IoT support
-COMPONENT_ADD_INCLUDEDIRS :=
-COMPONENT_ADD_LDFLAGS :=
-COMPONENT_SRCDIRS :=
-endif

components/aws_iot/include/aws_iot_config.h

@@ -1,65 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-/**
- * @file aws_iot_config.h
- * @brief AWS IoT specific configuration file
- */
-
-#ifndef _AWS_IOT_CONFIG_H_
-#define _AWS_IOT_CONFIG_H_
-
-#include "aws_iot_log.h"
-
-// This configuration macro needs to be available globally to enable threading
-#define _ENABLE_THREAD_SUPPORT_
-
-// These values are defined in the menuconfig of the AWS IoT component.
-// However, you can override these constants from your own code.
-#define AWS_IOT_MQTT_HOST              CONFIG_AWS_IOT_MQTT_HOST ///< Customer specific MQTT HOST. The same will be used for Thing Shadow
-#define AWS_IOT_MQTT_PORT              CONFIG_AWS_IOT_MQTT_PORT ///< default port for MQTT/S
-
-// These values are defaults and are used for ShadowConnectParametersDefault.
-// You should override them from your own code.
-#define AWS_IOT_MQTT_CLIENT_ID         "ESP32" ///< MQTT client ID should be unique for every device
-#define AWS_IOT_MY_THING_NAME          "ESP32" ///< Thing Name of the Shadow this device is associated with
-
-// MQTT PubSub
-#define AWS_IOT_MQTT_TX_BUF_LEN CONFIG_AWS_IOT_MQTT_TX_BUF_LEN ///< Any time a message is sent out through the MQTT layer. The message is copied into this buffer anytime a publish is done. This will also be used in the case of Thing Shadow
-#define AWS_IOT_MQTT_RX_BUF_LEN CONFIG_AWS_IOT_MQTT_RX_BUF_LEN ///< Any message that comes into the device should be less than this buffer size. If a received message is bigger than this buffer size the message will be dropped.
-#define AWS_IOT_MQTT_NUM_SUBSCRIBE_HANDLERS CONFIG_AWS_IOT_MQTT_NUM_SUBSCRIBE_HANDLERS ///< Maximum number of topic filters the MQTT client can handle at any given time. This should be increased appropriately when using Thing Shadow
-
-// Thing Shadow specific configs
-#ifdef CONFIG_AWS_IOT_OVERRIDE_THING_SHADOW_RX_BUFFER
-#define SHADOW_MAX_SIZE_OF_RX_BUFFER CONFIG_AWS_IOT_SHADOW_MAX_SIZE_OF_RX_BUFFER ///< Maximum size of the SHADOW buffer to store the received Shadow message, including NULL terminating byte
-#else
-#define SHADOW_MAX_SIZE_OF_RX_BUFFER (AWS_IOT_MQTT_RX_BUF_LEN + 1)
-#endif
-
-#define MAX_SIZE_OF_UNIQUE_CLIENT_ID_BYTES 80  ///< Maximum size of the Unique Client Id. For More info on the Client Id refer \ref response "Acknowledgments"
-#define MAX_SIZE_CLIENT_ID_WITH_SEQUENCE (MAX_SIZE_OF_UNIQUE_CLIENT_ID_BYTES + 10) ///< This is size of the extra sequence number that will be appended to the Unique client Id
-#define MAX_SIZE_CLIENT_TOKEN_CLIENT_SEQUENCE (MAX_SIZE_CLIENT_ID_WITH_SEQUENCE + 20) ///< This is size of the the total clientToken key and value pair in the JSON
-#define MAX_ACKS_TO_COMEIN_AT_ANY_GIVEN_TIME CONFIG_AWS_IOT_SHADOW_MAX_SIMULTANEOUS_ACKS ///< At Any given time we will wait for this many responses. This will correlate to the rate at which the shadow actions are requested
-#define MAX_THINGNAME_HANDLED_AT_ANY_GIVEN_TIME CONFIG_AWS_IOT_SHADOW_MAX_SIMULTANEOUS_THINGNAMES ///< We could perform shadow action on any thing Name and this is maximum Thing Names we can act on at any given time
-#define MAX_JSON_TOKEN_EXPECTED CONFIG_AWS_IOT_SHADOW_MAX_JSON_TOKEN_EXPECTED ///< These are the max tokens that is expected to be in the Shadow JSON document. Include the metadata that gets published
-#define MAX_SHADOW_TOPIC_LENGTH_WITHOUT_THINGNAME CONFIG_AWS_IOT_SHADOW_MAX_SHADOW_TOPIC_LENGTH_WITHOUT_THINGNAME ///< All shadow actions have to be published or subscribed to a topic which is of the formablogt $aws/things/{thingName}/shadow/update/accepted. This refers to the size of the topic without the Thing Name
-#define MAX_SIZE_OF_THING_NAME CONFIG_AWS_IOT_SHADOW_MAX_SIZE_OF_THING_NAME ///< The Thing Name should not be bigger than this value. Modify this if the Thing Name needs to be bigger
-#define MAX_SHADOW_TOPIC_LENGTH_BYTES (MAX_SHADOW_TOPIC_LENGTH_WITHOUT_THINGNAME + MAX_SIZE_OF_THING_NAME) ///< This size includes the length of topic with Thing Name
-
-// Auto Reconnect specific config
-#define AWS_IOT_MQTT_MIN_RECONNECT_WAIT_INTERVAL CONFIG_AWS_IOT_MQTT_MIN_RECONNECT_WAIT_INTERVAL ///< Minimum time before the First reconnect attempt is made as part of the exponential back-off algorithm
-#define AWS_IOT_MQTT_MAX_RECONNECT_WAIT_INTERVAL CONFIG_AWS_IOT_MQTT_MAX_RECONNECT_WAIT_INTERVAL ///< Maximum time interval after which exponential back-off will stop attempting to reconnect.
-
-#endif /* _AWS_IOT_CONFIG_H_ */

components/aws_iot/include/aws_iot_log.h

@@ -1,44 +0,0 @@
-// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-#pragma once
-
-/* (these two headers aren't used here, but AWS IoT SDK code relies on them
-   being included from here...) */
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "esp_log.h"
-
-/* This is a stub replacement for the aws_iot_log.h header in the AWS IoT SDK,
-   which redirects their logging framework into the esp-idf logging framework.
-
-   The current (2.1.1) upstream AWS IoT SDK doesn't allow this as some of its
-   headers include aws_iot_log.h, but our modified fork does.
-*/
-
-// redefine the AWS IoT log functions to call into the IDF log layer
-#define IOT_DEBUG(format, ...) ESP_LOGD("aws_iot", format, ##__VA_ARGS__)
-#define IOT_INFO(format, ...) ESP_LOGI("aws_iot", format, ##__VA_ARGS__)
-#define IOT_WARN(format, ...) ESP_LOGW("aws_iot", format, ##__VA_ARGS__)
-#define IOT_ERROR(format, ...) ESP_LOGE("aws_iot", format, ##__VA_ARGS__)
-
-/* Function tracing macros used in AWS IoT SDK,
-   mapped to "verbose" level output
-*/
-#define FUNC_ENTRY ESP_LOGV("aws_iot", "FUNC_ENTRY:   %s L#%d \n", __func__, __LINE__)
-#define FUNC_EXIT_RC(x) \
-    do {                                                                \
-        ESP_LOGV("aws_iot", "FUNC_EXIT:   %s L#%d Return Code : %d \n", __func__, __LINE__, x); \
-        return x; \
-    } while(0)

components/aws_iot/include/network_platform.h

@@ -1,64 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-#ifndef IOTSDKC_NETWORK_MBEDTLS_PLATFORM_H_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include "mbedtls/platform.h"
-#include "mbedtls/net_sockets.h"
-#include "mbedtls/ssl.h"
-#include "mbedtls/entropy.h"
-#include "mbedtls/ctr_drbg.h"
-#include "mbedtls/certs.h"
-#include "mbedtls/x509.h"
-#include "mbedtls/error.h"
-#include "mbedtls/debug.h"
-#include "mbedtls/timing.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief TLS Connection Parameters
- *
- * Defines a type containing TLS specific parameters to be passed down to the
- * TLS networking layer to create a TLS secured socket.
- */
-typedef struct _TLSDataParams {
-    mbedtls_entropy_context entropy;
-    mbedtls_ctr_drbg_context ctr_drbg;
-    mbedtls_ssl_context ssl;
-    mbedtls_ssl_config conf;
-    uint32_t flags;
-    mbedtls_x509_crt cacert;
-    mbedtls_x509_crt clicert;
-    mbedtls_pk_context pkey;
-    mbedtls_net_context server_fd;
-}TLSDataParams;
-
-#define IOTSDKC_NETWORK_MBEDTLS_PLATFORM_H_H
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //IOTSDKC_NETWORK_MBEDTLS_PLATFORM_H_H

components/aws_iot/include/threads_platform.h

@@ -1,45 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-#include "threads_interface.h"
-
-#ifndef AWS_IOTSDK_THREADS_PLATFORM_H
-#define AWS_IOTSDK_THREADS_PLATFORM_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/semphr.h"
-
-/**
- * @brief Mutex Type
- *
- * definition of the Mutex   struct. Platform specific
- *
- */
-struct _IoT_Mutex_t {
-    SemaphoreHandle_t mutex;
-};
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* AWS_IOTSDK_THREADS_PLATFORM_H */
-
-

components/aws_iot/include/timer_platform.h

@@ -1,40 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-#ifndef AWS_IOT_PLATFORM_H
-#define AWS_IOT_PLATFORM_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdint.h>
-#include "timer_interface.h"
-
-/**
- * definition of the Timer struct. Platform specific
- */
-struct Timer {
-    uint32_t start_ticks;
-    uint32_t timeout_ticks;
-    uint32_t last_polled_ticks;
-};
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* AWS_IOT_PLATFORM_H */

components/aws_iot/port/network_mbedtls_wrapper.c

@@ -1,417 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-#include <sys/param.h>
-#include <stdbool.h>
-#include <string.h>
-#include <timer_platform.h>
-#include <network_interface.h>
-
-#include "aws_iot_config.h"
-#include "aws_iot_error.h"
-#include "network_interface.h"
-#include "network_platform.h"
-
-#include "mbedtls/esp_debug.h"
-
-#include "esp_log.h"
-#include "esp_vfs.h"
-
-static const char *TAG = "aws_iot";
-
-/* This is the value used for ssl read timeout */
-#define IOT_SSL_READ_TIMEOUT 10
-
-/*
- * This is a function to do further verification if needed on the cert received.
- *
- * Currently used to print debug-level information about each cert.
- */
-static int _iot_tls_verify_cert(void *data, mbedtls_x509_crt *crt, int depth, uint32_t *flags) {
-    char buf[256];
-    ((void) data);
-
-    if (LOG_LOCAL_LEVEL >= ESP_LOG_DEBUG) {
-        ESP_LOGD(TAG, "Verify requested for (Depth %d):", depth);
-        mbedtls_x509_crt_info(buf, sizeof(buf) - 1, "", crt);
-        ESP_LOGD(TAG, "%s", buf);
-
-        if((*flags) == 0) {
-            ESP_LOGD(TAG, "  This certificate has no flags");
-        } else {
-            ESP_LOGD(TAG, "Verify result:%s", buf);
-        }
-    }
-
-    return 0;
-}
-
-static void _iot_tls_set_connect_params(Network *pNetwork, const char *pRootCALocation, const char *pDeviceCertLocation,
-                                 const char *pDevicePrivateKeyLocation, const char *pDestinationURL,
-                                 uint16_t destinationPort, uint32_t timeout_ms, bool ServerVerificationFlag) {
-    pNetwork->tlsConnectParams.DestinationPort = destinationPort;
-    pNetwork->tlsConnectParams.pDestinationURL = pDestinationURL;
-    pNetwork->tlsConnectParams.pDeviceCertLocation = pDeviceCertLocation;
-    pNetwork->tlsConnectParams.pDevicePrivateKeyLocation = pDevicePrivateKeyLocation;
-    pNetwork->tlsConnectParams.pRootCALocation = pRootCALocation;
-    pNetwork->tlsConnectParams.timeout_ms = timeout_ms;
-    pNetwork->tlsConnectParams.ServerVerificationFlag = ServerVerificationFlag;
-}
-
-IoT_Error_t iot_tls_init(Network *pNetwork, const char *pRootCALocation, const char *pDeviceCertLocation,
-                         const char *pDevicePrivateKeyLocation, const char *pDestinationURL,
-                         uint16_t destinationPort, uint32_t timeout_ms, bool ServerVerificationFlag) {
-    _iot_tls_set_connect_params(pNetwork, pRootCALocation, pDeviceCertLocation, pDevicePrivateKeyLocation,
-                                pDestinationURL, destinationPort, timeout_ms, ServerVerificationFlag);
-
-    pNetwork->connect = iot_tls_connect;
-    pNetwork->read = iot_tls_read;
-    pNetwork->write = iot_tls_write;
-    pNetwork->disconnect = iot_tls_disconnect;
-    pNetwork->isConnected = iot_tls_is_connected;
-    pNetwork->destroy = iot_tls_destroy;
-
-    pNetwork->tlsDataParams.flags = 0;
-
-    return SUCCESS;
-}
-
-IoT_Error_t iot_tls_is_connected(Network *pNetwork) {
-    /* Use this to add implementation which can check for physical layer disconnect */
-    return NETWORK_PHYSICAL_LAYER_CONNECTED;
-}
-
-IoT_Error_t iot_tls_connect(Network *pNetwork, TLSConnectParams *params) {
-    int ret = SUCCESS;
-    TLSDataParams *tlsDataParams = NULL;
-    char portBuffer[6];
-    char info_buf[256];
-
-    if(NULL == pNetwork) {
-        return NULL_VALUE_ERROR;
-    }
-
-    if(NULL != params) {
-        _iot_tls_set_connect_params(pNetwork, params->pRootCALocation, params->pDeviceCertLocation,
-                                    params->pDevicePrivateKeyLocation, params->pDestinationURL,
-                                    params->DestinationPort, params->timeout_ms, params->ServerVerificationFlag);
-    }
-
-    tlsDataParams = &(pNetwork->tlsDataParams);
-
-    mbedtls_net_init(&(tlsDataParams->server_fd));
-    mbedtls_ssl_init(&(tlsDataParams->ssl));
-    mbedtls_ssl_config_init(&(tlsDataParams->conf));
-
-#ifdef CONFIG_MBEDTLS_DEBUG
-    mbedtls_esp_enable_debug_log(&(tlsDataParams->conf), 4);
-#endif
-
-    mbedtls_ctr_drbg_init(&(tlsDataParams->ctr_drbg));
-    mbedtls_x509_crt_init(&(tlsDataParams->cacert));
-    mbedtls_x509_crt_init(&(tlsDataParams->clicert));
-    mbedtls_pk_init(&(tlsDataParams->pkey));
-
-    ESP_LOGD(TAG, "Seeding the random number generator...");
-    mbedtls_entropy_init(&(tlsDataParams->entropy));
-    if((ret = mbedtls_ctr_drbg_seed(&(tlsDataParams->ctr_drbg), mbedtls_entropy_func, &(tlsDataParams->entropy),
-                                    (const unsigned char *) TAG, strlen(TAG))) != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_ctr_drbg_seed returned -0x%x", -ret);
-        return NETWORK_MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED;
-    }
-
-   /*  Load root CA...
-
-       Certs/keys can be paths or they can be raw data. These use a
-       very basic heuristic: if the cert starts with '/' then it's a
-       path, if it's longer than this then it's raw cert data (PEM or DER,
-       neither of which can start with a slash. */
-    if (pNetwork->tlsConnectParams.pRootCALocation[0] == '/') {
-        ESP_LOGD(TAG, "Loading CA root certificate from file ...");
-        ret = mbedtls_x509_crt_parse_file(&(tlsDataParams->cacert), pNetwork->tlsConnectParams.pRootCALocation);
-    } else {
-        ESP_LOGD(TAG, "Loading embedded CA root certificate ...");
-        ret = mbedtls_x509_crt_parse(&(tlsDataParams->cacert), (const unsigned char *)pNetwork->tlsConnectParams.pRootCALocation,
-                                 strlen(pNetwork->tlsConnectParams.pRootCALocation)+1);
-    }
-
-    if(ret < 0) {
-        ESP_LOGE(TAG, "failed!  mbedtls_x509_crt_parse returned -0x%x while parsing root cert", -ret);
-        return NETWORK_X509_ROOT_CRT_PARSE_ERROR;
-    }
-    ESP_LOGD(TAG, "ok (%d skipped)", ret);
-
-    /* Load client certificate... */
-    if (pNetwork->tlsConnectParams.pDeviceCertLocation[0] == '/') {
-        ESP_LOGD(TAG, "Loading client cert from file...");
-        ret = mbedtls_x509_crt_parse_file(&(tlsDataParams->clicert),
-                                          pNetwork->tlsConnectParams.pDeviceCertLocation);
-    } else {
-        ESP_LOGD(TAG, "Loading embedded client certificate...");
-        ret = mbedtls_x509_crt_parse(&(tlsDataParams->clicert),
-                                     (const unsigned char *)pNetwork->tlsConnectParams.pDeviceCertLocation,
-                                     strlen(pNetwork->tlsConnectParams.pDeviceCertLocation)+1);
-    }
-    if(ret != 0) {
-        ESP_LOGE(TAG, "failed!  mbedtls_x509_crt_parse returned -0x%x while parsing device cert", -ret);
-        return NETWORK_X509_DEVICE_CRT_PARSE_ERROR;
-    }
-
-    /* Parse client private key... */
-    if (pNetwork->tlsConnectParams.pDevicePrivateKeyLocation[0] == '/') {
-        ESP_LOGD(TAG, "Loading client private key from file...");
-        ret = mbedtls_pk_parse_keyfile(&(tlsDataParams->pkey),
-                                       pNetwork->tlsConnectParams.pDevicePrivateKeyLocation,
-                                       "");
-    } else {
-        ESP_LOGD(TAG, "Loading embedded client private key...");
-        ret = mbedtls_pk_parse_key(&(tlsDataParams->pkey),
-                                   (const unsigned char *)pNetwork->tlsConnectParams.pDevicePrivateKeyLocation,
-                                   strlen(pNetwork->tlsConnectParams.pDevicePrivateKeyLocation)+1,
-                                   (const unsigned char *)"", 0);
-    }
-    if(ret != 0) {
-        ESP_LOGE(TAG, "failed!  mbedtls_pk_parse_key returned -0x%x while parsing private key", -ret);
-        return NETWORK_PK_PRIVATE_KEY_PARSE_ERROR;
-    }
-
-    /* Done parsing certs */
-    ESP_LOGD(TAG, "ok");
-    snprintf(portBuffer, 6, "%d", pNetwork->tlsConnectParams.DestinationPort);
-    ESP_LOGD(TAG, "Connecting to %s/%s...", pNetwork->tlsConnectParams.pDestinationURL, portBuffer);
-    if((ret = mbedtls_net_connect(&(tlsDataParams->server_fd), pNetwork->tlsConnectParams.pDestinationURL,
-                                  portBuffer, MBEDTLS_NET_PROTO_TCP)) != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_net_connect returned -0x%x", -ret);
-        switch(ret) {
-            case MBEDTLS_ERR_NET_SOCKET_FAILED:
-                return NETWORK_ERR_NET_SOCKET_FAILED;
-            case MBEDTLS_ERR_NET_UNKNOWN_HOST:
-                return NETWORK_ERR_NET_UNKNOWN_HOST;
-            case MBEDTLS_ERR_NET_CONNECT_FAILED:
-            default:
-                return NETWORK_ERR_NET_CONNECT_FAILED;
-        };
-    }
-
-    ret = mbedtls_net_set_block(&(tlsDataParams->server_fd));
-    if(ret != 0) {
-        ESP_LOGE(TAG, "failed! net_set_(non)block() returned -0x%x", -ret);
-        return SSL_CONNECTION_ERROR;
-    } ESP_LOGD(TAG, "ok");
-
-    ESP_LOGD(TAG, "Setting up the SSL/TLS structure...");
-    if((ret = mbedtls_ssl_config_defaults(&(tlsDataParams->conf), MBEDTLS_SSL_IS_CLIENT, MBEDTLS_SSL_TRANSPORT_STREAM,
-                                          MBEDTLS_SSL_PRESET_DEFAULT)) != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_ssl_config_defaults returned -0x%x", -ret);
-        return SSL_CONNECTION_ERROR;
-    }
-
-    mbedtls_ssl_conf_verify(&(tlsDataParams->conf), _iot_tls_verify_cert, NULL);
-
-    if(pNetwork->tlsConnectParams.ServerVerificationFlag == true) {
-        mbedtls_ssl_conf_authmode(&(tlsDataParams->conf), MBEDTLS_SSL_VERIFY_REQUIRED);
-    } else {
-        mbedtls_ssl_conf_authmode(&(tlsDataParams->conf), MBEDTLS_SSL_VERIFY_OPTIONAL);
-    }
-    mbedtls_ssl_conf_rng(&(tlsDataParams->conf), mbedtls_ctr_drbg_random, &(tlsDataParams->ctr_drbg));
-
-    mbedtls_ssl_conf_ca_chain(&(tlsDataParams->conf), &(tlsDataParams->cacert), NULL);
-    ret = mbedtls_ssl_conf_own_cert(&(tlsDataParams->conf), &(tlsDataParams->clicert), &(tlsDataParams->pkey));
-    if(ret != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_ssl_conf_own_cert returned %d", ret);
-        return SSL_CONNECTION_ERROR;
-    }
-
-    mbedtls_ssl_conf_read_timeout(&(tlsDataParams->conf), pNetwork->tlsConnectParams.timeout_ms);
-
-    /* Use the AWS IoT ALPN extension for MQTT, if port 443 is requested */
-    if (pNetwork->tlsConnectParams.DestinationPort == 443) {
-        const char *alpnProtocols[] = { "x-amzn-mqtt-ca", NULL };
-        if ((ret = mbedtls_ssl_conf_alpn_protocols(&(tlsDataParams->conf), alpnProtocols)) != 0) {
-            ESP_LOGE(TAG, "failed! mbedtls_ssl_conf_alpn_protocols returned -0x%x", -ret);
-            return SSL_CONNECTION_ERROR;
-        }
-    }
-
-    if((ret = mbedtls_ssl_setup(&(tlsDataParams->ssl), &(tlsDataParams->conf))) != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_ssl_setup returned -0x%x", -ret);
-        return SSL_CONNECTION_ERROR;
-    }
-    if((ret = mbedtls_ssl_set_hostname(&(tlsDataParams->ssl), pNetwork->tlsConnectParams.pDestinationURL)) != 0) {
-        ESP_LOGE(TAG, "failed! mbedtls_ssl_set_hostname returned %d", ret);
-        return SSL_CONNECTION_ERROR;
-    }
-    ESP_LOGD(TAG, "SSL state connect : %d ", tlsDataParams->ssl.state);
-    mbedtls_ssl_set_bio(&(tlsDataParams->ssl), &(tlsDataParams->server_fd), mbedtls_net_send, NULL,
-                        mbedtls_net_recv_timeout);
-    ESP_LOGD(TAG, "ok");
-
-    ESP_LOGD(TAG, "SSL state connect : %d ", tlsDataParams->ssl.state);
-    ESP_LOGD(TAG, "Performing the SSL/TLS handshake...");
-    while((ret = mbedtls_ssl_handshake(&(tlsDataParams->ssl))) != 0) {
-        if(ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
-            ESP_LOGE(TAG, "failed! mbedtls_ssl_handshake returned -0x%x", -ret);
-            if(ret == MBEDTLS_ERR_X509_CERT_VERIFY_FAILED) {
-                ESP_LOGE(TAG, "    Unable to verify the server's certificate. ");
-            }
-            return SSL_CONNECTION_ERROR;
-        }
-    }
-
-    ESP_LOGD(TAG, "ok    [ Protocol is %s ]    [ Ciphersuite is %s ]", mbedtls_ssl_get_version(&(tlsDataParams->ssl)),
-          mbedtls_ssl_get_ciphersuite(&(tlsDataParams->ssl)));
-    if((ret = mbedtls_ssl_get_record_expansion(&(tlsDataParams->ssl))) >= 0) {
-        ESP_LOGD(TAG, "    [ Record expansion is %d ]", ret);
-    } else {
-        ESP_LOGD(TAG, "    [ Record expansion is unknown (compression) ]");
-    }
-
-    ESP_LOGD(TAG, "Verifying peer X.509 certificate...");
-
-    if(pNetwork->tlsConnectParams.ServerVerificationFlag == true) {
-        if((tlsDataParams->flags = mbedtls_ssl_get_verify_result(&(tlsDataParams->ssl))) != 0) {
-            ESP_LOGE(TAG, "failed");
-            mbedtls_x509_crt_verify_info(info_buf, sizeof(info_buf), "  ! ", tlsDataParams->flags);
-            ESP_LOGE(TAG, "%s", info_buf);
-            ret = SSL_CONNECTION_ERROR;
-        } else {
-            ESP_LOGD(TAG, "ok");
-            ret = SUCCESS;
-        }
-    } else {
-        ESP_LOGW(TAG, " Server Verification skipped");
-        ret = SUCCESS;
-    }
-
-    if(LOG_LOCAL_LEVEL >= ESP_LOG_DEBUG) {
-        if (mbedtls_ssl_get_peer_cert(&(tlsDataParams->ssl)) != NULL) {
-            ESP_LOGD(TAG, "Peer certificate information:");
-            mbedtls_x509_crt_info((char *) info_buf, sizeof(info_buf) - 1, "      ", mbedtls_ssl_get_peer_cert(&(tlsDataParams->ssl)));
-            ESP_LOGD(TAG, "%s", info_buf);
-        }
-    }
-
-    return (IoT_Error_t) ret;
-}
-
-IoT_Error_t iot_tls_write(Network *pNetwork, unsigned char *pMsg, size_t len, Timer *timer, size_t *written_len) {
-    size_t written_so_far;
-    bool isErrorFlag = false;
-    int frags, ret = 0;
-    TLSDataParams *tlsDataParams = &(pNetwork->tlsDataParams);
-
-    for(written_so_far = 0, frags = 0;
-        written_so_far < len && !has_timer_expired(timer); written_so_far += ret, frags++) {
-        while(!has_timer_expired(timer) &&
-              (ret = mbedtls_ssl_write(&(tlsDataParams->ssl), pMsg + written_so_far, len - written_so_far)) <= 0) {
-            if(ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
-                ESP_LOGE(TAG, "failed! mbedtls_ssl_write returned -0x%x", -ret);
-                /* All other negative return values indicate connection needs to be reset.
-                * Will be caught in ping request so ignored here */
-                isErrorFlag = true;
-                break;
-            }
-        }
-        if(isErrorFlag) {
-            break;
-        }
-    }
-
-    *written_len = written_so_far;
-
-    if(isErrorFlag) {
-        return NETWORK_SSL_WRITE_ERROR;
-    } else if(has_timer_expired(timer) && written_so_far != len) {
-        return NETWORK_SSL_WRITE_TIMEOUT_ERROR;
-    }
-
-    return SUCCESS;
-}
-
-IoT_Error_t iot_tls_read(Network *pNetwork, unsigned char *pMsg, size_t len, Timer *timer, size_t *read_len) {
-    TLSDataParams *tlsDataParams = &(pNetwork->tlsDataParams);
-    mbedtls_ssl_context *ssl = &(tlsDataParams->ssl);
-    mbedtls_ssl_config *ssl_conf = &(tlsDataParams->conf);
-    uint32_t read_timeout;
-    size_t rxLen = 0;
-    int ret;
-
-    read_timeout = ssl_conf->read_timeout;
-
-    while (len > 0) {
-
-        /* Make sure we never block on read for longer than timer has left,
-         but also that we don't block indefinitely (ie read_timeout > 0) */
-        mbedtls_ssl_conf_read_timeout(ssl_conf, MAX(1, MIN(read_timeout, left_ms(timer))));
-
-        ret = mbedtls_ssl_read(ssl, pMsg, len);
-
-        /* Restore the old timeout */
-        mbedtls_ssl_conf_read_timeout(ssl_conf, read_timeout);
-
-        if (ret > 0) {
-            rxLen += ret;
-            pMsg += ret;
-            len -= ret;
-        } else if (ret == 0 || (ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_TIMEOUT)) {
-            return NETWORK_SSL_READ_ERROR;
-        }
-
-        // Evaluate timeout after the read to make sure read is done at least once
-        if (has_timer_expired(timer)) {
-            break;
-        }
-    }
-
-    if (len == 0) {
-        *read_len = rxLen;
-        return SUCCESS;
-    }
-
-    if (rxLen == 0) {
-        return NETWORK_SSL_NOTHING_TO_READ;
-    } else {
-        return NETWORK_SSL_READ_TIMEOUT_ERROR;
-    }
-}
-
-IoT_Error_t iot_tls_disconnect(Network *pNetwork) {
-    mbedtls_ssl_context *ssl = &(pNetwork->tlsDataParams.ssl);
-    int ret = 0;
-    do {
-        ret = mbedtls_ssl_close_notify(ssl);
-    } while(ret == MBEDTLS_ERR_SSL_WANT_WRITE);
-
-    /* All other negative return values indicate connection needs to be reset.
-     * No further action required since this is disconnect call */
-
-    return SUCCESS;
-}
-
-IoT_Error_t iot_tls_destroy(Network *pNetwork) {
-    TLSDataParams *tlsDataParams = &(pNetwork->tlsDataParams);
-
-    mbedtls_net_free(&(tlsDataParams->server_fd));
-
-    mbedtls_x509_crt_free(&(tlsDataParams->clicert));
-    mbedtls_x509_crt_free(&(tlsDataParams->cacert));
-    mbedtls_pk_free(&(tlsDataParams->pkey));
-    mbedtls_ssl_free(&(tlsDataParams->ssl));
-    mbedtls_ssl_config_free(&(tlsDataParams->conf));
-    mbedtls_ctr_drbg_free(&(tlsDataParams->ctr_drbg));
-    mbedtls_entropy_free(&(tlsDataParams->entropy));
-
-    return SUCCESS;
-}

components/aws_iot/port/threads_freertos.c

@@ -1,104 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-
-#include "threads_platform.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief Initialize the provided mutex
- *
- * Call this function to initialize the mutex
- *
- * @param IoT_Mutex_t - pointer to the mutex to be initialized
- * @return IoT_Error_t - error code indicating result of operation
- */
-IoT_Error_t aws_iot_thread_mutex_init(IoT_Mutex_t *pMutex) {
-
-    pMutex->mutex = xSemaphoreCreateRecursiveMutex();
-    return pMutex->mutex ? SUCCESS : MUTEX_INIT_ERROR;
-}
-
-/**
- * @brief Lock the provided mutex
- *
- * Call this function to lock the mutex before performing a state change
- * Blocking, thread will block until lock request fails
- *
- * @param IoT_Mutex_t - pointer to the mutex to be locked
- * @return IoT_Error_t - error code indicating result of operation
- */
-IoT_Error_t aws_iot_thread_mutex_lock(IoT_Mutex_t *pMutex) {
-    xSemaphoreTakeRecursive(pMutex->mutex, portMAX_DELAY);
-    return SUCCESS;
-}
-
-/**
- * @brief Try to lock the provided mutex
- *
- * Call this function to attempt to lock the mutex before performing a state change
- * Non-Blocking, immediately returns with failure if lock attempt fails
- *
- * @param IoT_Mutex_t - pointer to the mutex to be locked
- * @return IoT_Error_t - error code indicating result of operation
- */
-IoT_Error_t aws_iot_thread_mutex_trylock(IoT_Mutex_t *pMutex) {
-    if (xSemaphoreTakeRecursive(pMutex->mutex, 0)) {
-        return SUCCESS;
-    } else {
-        return MUTEX_LOCK_ERROR;
-    }
-}
-
-/**
- * @brief Unlock the provided mutex
- *
- * Call this function to unlock the mutex before performing a state change
- *
- * @param IoT_Mutex_t - pointer to the mutex to be unlocked
- * @return IoT_Error_t - error code indicating result of operation
- */
-IoT_Error_t aws_iot_thread_mutex_unlock(IoT_Mutex_t *pMutex) {
-    if (xSemaphoreGiveRecursive(pMutex->mutex)) {
-        return SUCCESS;
-    } else {
-        return MUTEX_UNLOCK_ERROR;
-    }
-}
-
-/**
- * @brief Destroy the provided mutex
- *
- * Call this function to destroy the mutex
- *
- * @param IoT_Mutex_t - pointer to the mutex to be destroyed
- * @return IoT_Error_t - error code indicating result of operation
- */
-IoT_Error_t aws_iot_thread_mutex_destroy(IoT_Mutex_t *pMutex) {
-    vSemaphoreDelete(pMutex->mutex);
-    return SUCCESS;
-}
-
-#ifdef __cplusplus
-}
-#endif
-

components/aws_iot/port/timer.c

@@ -1,83 +0,0 @@
-/*
- * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- * Additions Copyright 2016 Espressif Systems (Shanghai) PTE LTD
- *
- * Licensed under the Apache License, Version 2.0 (the "License").
- * You may not use this file except in compliance with the License.
- * A copy of the License is located at
- *
- *  http://aws.amazon.com/apache2.0
- *
- * or in the "license" file accompanying this file. This file is distributed
- * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
- * express or implied. See the License for the specific language governing
- * permissions and limitations under the License.
- */
-
-/**
- * @file timer.c
- * @brief FreeRTOS implementation of the timer interface uses ticks.
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <limits.h>
-
-#include "timer_platform.h"
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_log.h"
-
-const static char *TAG = "aws_timer";
-
-bool has_timer_expired(Timer *timer) {
-    uint32_t now = xTaskGetTickCount();
-    bool expired = (now - timer->start_ticks) >= timer->timeout_ticks;
-
-    /* AWS IoT SDK isn't very RTOS friendly because it polls for "done
-       timers" a lot without ever sleeping on them. So we hack in some
-       amount of sleeping here: if it seems like the caller is polling
-       an unexpired timer in a tight loop then we delay a tick to let
-       things progress elsewhere.
-    */
-    if(!expired && now == timer->last_polled_ticks) {
-        vTaskDelay(1);
-    }
-    timer->last_polled_ticks = now;
-    return expired;
-}
-
-void countdown_ms(Timer *timer, uint32_t timeout) {
-    timer->start_ticks = xTaskGetTickCount();
-    timer->timeout_ticks = timeout / portTICK_PERIOD_MS;
-    timer->last_polled_ticks = 0;
-}
-
-uint32_t left_ms(Timer *timer) {
-    uint32_t now = xTaskGetTickCount();
-    uint32_t elapsed = now - timer->start_ticks;
-    if (elapsed < timer->timeout_ticks) {
-        return (timer->timeout_ticks - elapsed) * portTICK_PERIOD_MS;
-    } else {
-        return 0;
-    }
-}
-
-void countdown_sec(Timer *timer, uint32_t timeout) {
-    if (timeout > UINT32_MAX / 1000) {
-        ESP_LOGE(TAG, "timeout is out of range: %ds", timeout);
-    }
-    countdown_ms(timer, timeout * 1000);
-}
-
-void init_timer(Timer *timer) {
-    timer->start_ticks = 0;
-    timer->timeout_ticks = 0;
-    timer->last_polled_ticks = 0;
-}
-
-#ifdef __cplusplus
-}
-#endif

components/bootloader/CMakeLists.txt

@@ -1,7 +1,21 @@
-# bootloader component logic is all in project_include.cmake,
-# and subproject/CMakeLists.txt.
-#
-# This file is only included so the build system finds the
-# component
+idf_component_register(PRIV_REQUIRES partition_table)
 
+# Do not generate flash file when building bootloader or is in early expansion of the build
+if(BOOTLOADER_BUILD OR NOT CONFIG_APP_BUILD_BOOTLOADER)
+    return()
+endif()
 
+# When secure boot is enabled, do not flash bootloader along with invocation of `idf.py flash`
+if(NOT CONFIG_SECURE_BOOT_ENABLED)
+    set(flash_bootloader FLASH_IN_PROJECT)
+endif()
+
+# Set values used in flash_bootloader_args.in and generate flash file
+# for bootloader
+esptool_py_flash_project_args(bootloader 0x1000
+                            ${BOOTLOADER_BUILD_DIR}/bootloader.bin
+                            ${flash_bootloader}
+                            FLASH_FILE_TEMPLATE flash_bootloader_args.in)
+
+esptool_py_custom_target(bootloader-flash bootloader "bootloader")
+add_dependencies(bootloader partition_table)

components/bootloader/Kconfig.projbuild

@@ -1,429 +1,607 @@
 menu "Bootloader config"
-choice LOG_BOOTLOADER_LEVEL
-   bool "Bootloader log verbosity"
-   default LOG_BOOTLOADER_LEVEL_INFO
-   help
-       Specify how much output to see in bootloader logs.
+    choice BOOTLOADER_LOG_LEVEL
+        bool "Bootloader log verbosity"
+        default BOOTLOADER_LOG_LEVEL_INFO
+        help
+            Specify how much output to see in bootloader logs.
 
-config LOG_BOOTLOADER_LEVEL_NONE
-   bool "No output"
-config LOG_BOOTLOADER_LEVEL_ERROR
-   bool "Error"
-config LOG_BOOTLOADER_LEVEL_WARN
-   bool "Warning"
-config LOG_BOOTLOADER_LEVEL_INFO
-   bool "Info"
-config LOG_BOOTLOADER_LEVEL_DEBUG
-   bool "Debug"
-config LOG_BOOTLOADER_LEVEL_VERBOSE
-   bool "Verbose"
-endchoice
+        config BOOTLOADER_LOG_LEVEL_NONE
+            bool "No output"
+        config BOOTLOADER_LOG_LEVEL_ERROR
+            bool "Error"
+        config BOOTLOADER_LOG_LEVEL_WARN
+            bool "Warning"
+        config BOOTLOADER_LOG_LEVEL_INFO
+            bool "Info"
+        config BOOTLOADER_LOG_LEVEL_DEBUG
+            bool "Debug"
+        config BOOTLOADER_LOG_LEVEL_VERBOSE
+            bool "Verbose"
+    endchoice
 
-config LOG_BOOTLOADER_LEVEL
-    int
-    default 0 if LOG_BOOTLOADER_LEVEL_NONE
-    default 1 if LOG_BOOTLOADER_LEVEL_ERROR
-    default 2 if LOG_BOOTLOADER_LEVEL_WARN
-    default 3 if LOG_BOOTLOADER_LEVEL_INFO
-    default 4 if LOG_BOOTLOADER_LEVEL_DEBUG
-    default 5 if LOG_BOOTLOADER_LEVEL_VERBOSE
+    config BOOTLOADER_LOG_LEVEL
+        int
+        default 0 if BOOTLOADER_LOG_LEVEL_NONE
+        default 1 if BOOTLOADER_LOG_LEVEL_ERROR
+        default 2 if BOOTLOADER_LOG_LEVEL_WARN
+        default 3 if BOOTLOADER_LOG_LEVEL_INFO
+        default 4 if BOOTLOADER_LOG_LEVEL_DEBUG
+        default 5 if BOOTLOADER_LOG_LEVEL_VERBOSE
 
-config BOOTLOADER_SPI_WP_PIN
-    int "SPI Flash WP Pin when customising pins via efuse (read help)"
-    range 0 33
-    default 7
-    depends on FLASHMODE_QIO || FLASHMODE_QOUT
-    help
-        This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
-        overriden by setting the efuses SPI_PAD_CONFIG_xxx.
+    config BOOTLOADER_SPI_WP_PIN
+        int "SPI Flash WP Pin when customising pins via eFuse (read help)"
+        range 0 33
+        default 7
+        depends on ESPTOOLPY_FLASHMODE_QIO || ESPTOOLPY_FLASHMODE_QOUT
+        help
+            This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
+            overriden by setting the eFuses SPI_PAD_CONFIG_xxx.
 
-        When this is the case, the Efuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
-        pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in Efuse. That pin number is compiled into the bootloader
-        instead.
+            When this is the case, the eFuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
+            pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in eFuse. That pin number is compiled into the
+            bootloader instead.
 
-        The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
+            The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
 
-choice BOOTLOADER_VDDSDIO_BOOST
-    bool "VDDSDIO LDO voltage"
-    default BOOTLOADER_VDDSDIO_BOOST_1_9V
-    help
-        If this option is enabled, and VDDSDIO LDO is set to 1.8V (using EFUSE
-        or MTDI bootstrapping pin), bootloader will change LDO settings to
-        output 1.9V instead. This helps prevent flash chip from browning out
-        during flash programming operations.
+    choice BOOTLOADER_VDDSDIO_BOOST
+        bool "VDDSDIO LDO voltage"
+        default BOOTLOADER_VDDSDIO_BOOST_1_9V
+        help
+            If this option is enabled, and VDDSDIO LDO is set to 1.8V (using eFuse
+            or MTDI bootstrapping pin), bootloader will change LDO settings to
+            output 1.9V instead. This helps prevent flash chip from browning out
+            during flash programming operations.
 
-        This option has no effect if VDDSDIO is set to 3.3V, or if the internal
-        VDDSDIO regulator is disabled via efuse.
+            This option has no effect if VDDSDIO is set to 3.3V, or if the internal
+            VDDSDIO regulator is disabled via eFuse.
 
-config BOOTLOADER_VDDSDIO_BOOST_1_8V
-    bool "1.8V"
-    depends on !ESPTOOLPY_FLASHFREQ_80M
-config BOOTLOADER_VDDSDIO_BOOST_1_9V
-    bool "1.9V"
-endchoice
+        config BOOTLOADER_VDDSDIO_BOOST_1_8V
+            bool "1.8V"
+            depends on !ESPTOOLPY_FLASHFREQ_80M
+        config BOOTLOADER_VDDSDIO_BOOST_1_9V
+            bool "1.9V"
+    endchoice
 
-config BOOTLOADER_FACTORY_RESET
-    bool "GPIO triggers factory reset"
-    default N
-    help
-        Allows to reset the device to factory settings:
-        - clear one or more data partitions;
-        - boot from "factory" partition.
-        The factory reset will occur if there is a GPIO input pulled low while device starts up.
-        See settings below.
+    config BOOTLOADER_FACTORY_RESET
+        bool "GPIO triggers factory reset"
+        default N
+        help
+            Allows to reset the device to factory settings:
+            - clear one or more data partitions;
+            - boot from "factory" partition.
+            The factory reset will occur if there is a GPIO input pulled low while device starts up.
+            See settings below.
 
-config BOOTLOADER_NUM_PIN_FACTORY_RESET
-    int "Number of the GPIO input for factory reset"
-    depends on BOOTLOADER_FACTORY_RESET
-    range 0 39
-    default 4
-    help
-        The selected GPIO will be configured as an input with internal pull-up enabled.
-        To trigger a factory reset, this GPIO must be pulled low on reset.
-        Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
+    config BOOTLOADER_NUM_PIN_FACTORY_RESET
+        int "Number of the GPIO input for factory reset"
+        depends on BOOTLOADER_FACTORY_RESET
+        range 0 39
+        default 4
+        help
+            The selected GPIO will be configured as an input with internal pull-up enabled.
+            To trigger a factory reset, this GPIO must be pulled low on reset.
+            Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
 
-config BOOTLOADER_OTA_DATA_ERASE
-    bool "Clear OTA data on factory reset (select factory partition)"
-    depends on BOOTLOADER_FACTORY_RESET
-    help
-        The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a factory reset.
+    config BOOTLOADER_OTA_DATA_ERASE
+        bool "Clear OTA data on factory reset (select factory partition)"
+        depends on BOOTLOADER_FACTORY_RESET
+        help
+            The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a
+            factory reset.
 
-config BOOTLOADER_DATA_FACTORY_RESET
-     string "Comma-separated names of partitions to clear on factory reset"
-     depends on BOOTLOADER_FACTORY_RESET
-     default "nvs"
-     help
-        Allows customers to select which data partitions will be erased while factory reset.
-        
-        Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this: "nvs, phy_init, ...")
-        Make sure that the name specified in the partition table and here are the same. 
-        Partitions of type "app" cannot be specified here.
+    config BOOTLOADER_DATA_FACTORY_RESET
+        string "Comma-separated names of partitions to clear on factory reset"
+        depends on BOOTLOADER_FACTORY_RESET
+        default "nvs"
+        help
+            Allows customers to select which data partitions will be erased while factory reset.
 
-config BOOTLOADER_APP_TEST
-    bool "GPIO triggers boot from test app partition"
-    default N
-    help
-        Allows to run the test app from "TEST" partition.
-        A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
-        See settings below.
+            Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this:
+            "nvs, phy_init, ...")
+            Make sure that the name specified in the partition table and here are the same.
+            Partitions of type "app" cannot be specified here.
 
-config BOOTLOADER_NUM_PIN_APP_TEST
-    int "Number of the GPIO input to boot TEST partition"
-    depends on BOOTLOADER_APP_TEST
-    range 0 39
-    default 18
-    help
-        The selected GPIO will be configured as an input with internal pull-up enabled.
-        To trigger a test app, this GPIO must be pulled low on reset.
-        After the GPIO input is deactivated and the device reboots, the old application will boot. 
-        (factory or OTA[x]).
-        Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
+    config BOOTLOADER_APP_TEST
+        bool "GPIO triggers boot from test app partition"
+        default N
+        help
+            Allows to run the test app from "TEST" partition.
+            A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
+            See settings below.
 
-config BOOTLOADER_HOLD_TIME_GPIO
-    int "Hold time of GPIO for reset/test mode (seconds)"
-    depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
-    default 5
-    help
-        The GPIO must be held low continuously for this period of time after reset 
-        before a factory reset or test partition boot (as applicable) is performed.
+    config BOOTLOADER_NUM_PIN_APP_TEST
+        int "Number of the GPIO input to boot TEST partition"
+        depends on BOOTLOADER_APP_TEST
+        range 0 39
+        default 18
+        help
+            The selected GPIO will be configured as an input with internal pull-up enabled.
+            To trigger a test app, this GPIO must be pulled low on reset.
+            After the GPIO input is deactivated and the device reboots, the old application will boot.
+            (factory or OTA[x]).
+            Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
 
-config BOOTLOADER_WDT_ENABLE
-    bool "Use RTC watchdog in start code"
-    default y
-    help
-        Tracks the execution time of startup code.
-        If the execution time is exceeded, the RTC_WDT will restart system.
-        It is also useful to prevent a lock up in start code caused by an unstable power source.
-        NOTE: Tracks the execution time starts from the bootloader code - re-set timeout, while selecting the source for slow_clk - and ends calling app_main.
-        Re-set timeout is needed due to WDT uses a SLOW_CLK clock source. After changing a frequency slow_clk a time of WDT needs to re-set for new frequency.
-        slow_clk depends on ESP32_RTC_CLOCK_SOURCE (INTERNAL_RC or EXTERNAL_CRYSTAL).
+    config BOOTLOADER_HOLD_TIME_GPIO
+        int "Hold time of GPIO for reset/test mode (seconds)"
+        depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
+        default 5
+        help
+            The GPIO must be held low continuously for this period of time after reset
+            before a factory reset or test partition boot (as applicable) is performed.
 
-config BOOTLOADER_WDT_DISABLE_IN_USER_CODE
-    bool "Allows RTC watchdog disable in user code"
-    depends on BOOTLOADER_WDT_ENABLE
-    default n
-    help
-        If it is set, the client must itself reset or disable rtc_wdt in their code (app_main()).
-        Otherwise rtc_wdt will be disabled before calling app_main function.
-        Use function rtc_wdt_feed() for resetting counter of rtc_wdt.
-        Use function rtc_wdt_disable() for disabling rtc_wdt.
+    config BOOTLOADER_WDT_ENABLE
+        bool "Use RTC watchdog in start code"
+        default y
+        help
+            Tracks the execution time of startup code.
+            If the execution time is exceeded, the RTC_WDT will restart system.
+            It is also useful to prevent a lock up in start code caused by an unstable power source.
+            NOTE: Tracks the execution time starts from the bootloader code - re-set timeout, while selecting the
+            source for slow_clk - and ends calling app_main.
+            Re-set timeout is needed due to WDT uses a SLOW_CLK clock source. After changing a frequency slow_clk a
+            time of WDT needs to re-set for new frequency.
+            slow_clk depends on ESP32_RTC_CLK_SRC (INTERNAL_RC or EXTERNAL_CRYSTAL).
 
-config BOOTLOADER_WDT_TIME_MS
-    int "Timeout for RTC watchdog (ms)"
-    depends on BOOTLOADER_WDT_ENABLE
-    default 9000
-    range 0 120000
-    help
-        Verify that this parameter is correct and more then the execution time. 
-        Pay attention to options such as reset to factory, trigger test partition and encryption on boot
-        - these options can increase the execution time. 
-        Note: RTC_WDT will reset while encryption operations will be performed.
+    config BOOTLOADER_WDT_DISABLE_IN_USER_CODE
+        bool "Allows RTC watchdog disable in user code"
+        depends on BOOTLOADER_WDT_ENABLE
+        default n
+        help
+            If it is set, the client must itself reset or disable rtc_wdt in their code (app_main()).
+            Otherwise rtc_wdt will be disabled before calling app_main function.
+            Use function rtc_wdt_feed() for resetting counter of rtc_wdt.
+            Use function rtc_wdt_disable() for disabling rtc_wdt.
+
+    config BOOTLOADER_WDT_TIME_MS
+        int "Timeout for RTC watchdog (ms)"
+        depends on BOOTLOADER_WDT_ENABLE
+        default 9000
+        range 0 120000
+        help
+            Verify that this parameter is correct and more then the execution time.
+            Pay attention to options such as reset to factory, trigger test partition and encryption on boot
+            - these options can increase the execution time.
+            Note: RTC_WDT will reset while encryption operations will be performed.
+
+    config BOOTLOADER_APP_ROLLBACK_ENABLE
+        bool "Enable app rollback support"
+        default n
+        help
+            After updating the app, the bootloader runs a new app with the "ESP_OTA_IMG_PENDING_VERIFY" state set.
+            This state prevents the re-run of this app. After the first boot of the new app in the user code, the
+            function should be called to confirm the operability of the app or vice versa about its non-operability.
+            If the app is working, then it is marked as valid. Otherwise, it is marked as not valid and rolls back to
+            the previous working app. A reboot is performed, and the app is booted before the software update.
+            Note: If during the first boot a new app the power goes out or the WDT works, then roll back will happen.
+            Rollback is possible only between the apps with the same security versions.
+
+    config BOOTLOADER_APP_ANTI_ROLLBACK
+        bool "Enable app anti-rollback support"
+        depends on BOOTLOADER_APP_ROLLBACK_ENABLE
+        default n
+        help
+            This option prevents rollback to previous firmware/application image with lower security version.
+
+    config BOOTLOADER_APP_SECURE_VERSION
+        int "eFuse secure version of app"
+        depends on BOOTLOADER_APP_ANTI_ROLLBACK
+        default 0
+        help
+            The secure version is the sequence number stored in the header of each firmware.
+            The security version is set in the bootloader, version is recorded in the eFuse field
+            as the number of set ones. The allocated number of bits in the efuse field
+            for storing the security version is limited (see BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD option).
+
+            Bootloader: When bootloader selects an app to boot, an app is selected that has
+            a security version greater or equal that recorded in eFuse field.
+            The app is booted with a higher (or equal) secure version.
+
+            The security version is worth increasing if in previous versions there is
+            a significant vulnerability and their use is not acceptable.
+
+            Your partition table should has a scheme with ota_0 + ota_1 (without factory).
+
+    config BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD
+        int "Size of the efuse secure version field"
+        depends on BOOTLOADER_APP_ANTI_ROLLBACK
+        range 1 32 if IDF_TARGET_ESP32
+        default 32 if IDF_TARGET_ESP32
+        range 1 16 if IDF_TARGET_ESP32S2BETA
+        default 16 if IDF_TARGET_ESP32S2BETA
+        help
+            The size of the efuse secure version field.
+            Its length is limited to 32 bits for ESP32 and 16 bits for ESP32S2BETA.
+            This determines how many times the security version can be increased.
+
+    config BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE
+        bool "Emulate operations with efuse secure version(only test)"
+        default n
+        depends on BOOTLOADER_APP_ANTI_ROLLBACK
+        help
+            This option allow emulate read/write operations with efuse secure version.
+            It allow to test anti-rollback implemention without permanent write eFuse bits.
+            In partition table should be exist this partition `emul_efuse, data, 5, , 0x2000`.
+
+    config BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP
+        bool "Skip image validation when exiting deep sleep"
+        depends on (SECURE_BOOT_ENABLED && SECURE_BOOT_INSECURE) || !SECURE_BOOT_ENABLED
+        default n
+        help
+            This option disables the normal validation of an image coming out of
+            deep sleep (checksums, SHA256, and signature). This is a trade-off
+            between wakeup performance from deep sleep, and image integrity checks.
+
+            Only enable this if you know what you are doing. It should not be used
+            in conjunction with using deep_sleep() entry and changing the active OTA
+            partition as this would skip the validation upon first load of the new
+            OTA partition.
+
+    config BOOTLOADER_RESERVE_RTC_SIZE
+        hex
+        default 0x10 if BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP || BOOTLOADER_CUSTOM_RESERVE_RTC
+        default 0
+        help
+            Reserve RTC FAST memory for Skip image validation. This option in bytes.
+            This option reserves an area in the RTC FAST memory (access only PRO_CPU).
+            Used to save the addresses of the selected application.
+            When a wakeup occurs (from Deep sleep), the bootloader retrieves it and
+            loads the application without validation.
+
+    config BOOTLOADER_CUSTOM_RESERVE_RTC
+        bool "Reserve RTC FAST memory for custom purposes"
+        default n
+        help
+            This option allows the customer to place data in the RTC FAST memory,
+            this area remains valid when rebooted, except for power loss.
+            This memory is located at a fixed address and is available
+            for both the bootloader and the application.
+            (The application and bootoloader must be compiled with the same option).
+            The RTC FAST memory has access only through PRO_CPU.
+
+    config BOOTLOADER_CUSTOM_RESERVE_RTC_SIZE
+        hex "Size in bytes for custom purposes"
+        range 0 0x10
+        default 0
+        depends on BOOTLOADER_CUSTOM_RESERVE_RTC
+        help
+            This option reserves in RTC FAST memory the area for custom purposes.
+            If you want to create your own bootloader and save more information
+            in this area of memory, you can increase it. It must be a multiple of 4 bytes.
+            This area (rtc_retain_mem_t) is reserved and has access from the bootloader and an application.
 
 endmenu  # Bootloader
 
 
 menu "Security features"
 
-# These three are the actual options to check in code,
-# selected by the displayed options
-config SECURE_SIGNED_ON_BOOT
-    bool
-    default y
-    depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
+    # These three are the actual options to check in code,
+    # selected by the displayed options
+    config SECURE_SIGNED_ON_BOOT
+        bool
+        default y
+        depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
+
+    config SECURE_SIGNED_ON_UPDATE
+        bool
+        default y
+        depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
+
+    config SECURE_SIGNED_APPS
+        bool
+        default y
+        select MBEDTLS_ECP_DP_SECP256R1_ENABLED
+        select MBEDTLS_ECP_C
+        select MBEDTLS_ECDH_C
+        select MBEDTLS_ECDSA_C
+        depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
+
+
+    config SECURE_SIGNED_APPS_NO_SECURE_BOOT
+        bool "Require signed app images"
+        default n
+        depends on !SECURE_BOOT_ENABLED
+        help
+            Require apps to be signed to verify their integrity.
+
+            This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it
+            does not prevent the bootloader from being physically updated. This means that the device can be secured
+            against remote network access, but not physical access. Compared to using hardware Secure Boot this option
+            is much simpler to implement.
+
+    config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
+        bool "Bootloader verifies app signatures"
+        default n
+        depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
+        help
+            If this option is set, the bootloader will be compiled with code to verify that an app is signed before
+            booting it.
+
+            If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
+            If hardware secure boot is not enabled, this option doesn't add significant security by itself so most
+            users will want to leave it disabled.
+
+    config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
+        bool "Verify app signature on update"
+        default y
+        depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
+        help
+            If this option is set, any OTA updated apps will have the signature verified before being considered valid.
+
+            When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA
+            updates, or esp_image_format.h APIs are used to verify apps.
+
+            If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
+            If hardware secure boot is not enabled, this option still adds significant security against network-based
+            attackers by preventing spoofing of OTA updates.
+
+    config SECURE_BOOT_ENABLED
+        bool "Enable hardware secure boot in bootloader (READ DOCS FIRST)"
+        default n
+        help
+            Build a bootloader which enables secure boot on first boot.
+
+            Once enabled, secure boot will not boot a modified bootloader. The bootloader will only load a partition
+            table or boot an app if the data has a verified digital signature. There are implications for reflashing
+            updated apps once secure boot is enabled.
+
+            When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
+
+            Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
+
+    choice SECURE_BOOTLOADER_MODE
+        bool "Secure bootloader mode"
+        depends on SECURE_BOOT_ENABLED
+        default SECURE_BOOTLOADER_ONE_TIME_FLASH
+
+        config SECURE_BOOTLOADER_ONE_TIME_FLASH
+            bool "One-time flash"
+            help
+                On first boot, the bootloader will generate a key which is not readable externally or by software. A
+                digest is generated from the bootloader image itself. This digest will be verified on each subsequent
+                boot.
+
+                Enabling this option means that the bootloader cannot be changed after the first time it is booted.
+
+        config SECURE_BOOTLOADER_REFLASHABLE
+            bool "Reflashable"
+            help
+                Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
+
+                This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing
+                key.
+
+                This option is less secure than one-time flash, because a leak of the digest key from one device
+                allows reflashing of any device that uses it.
+
+    endchoice
+
+    config SECURE_BOOT_BUILD_SIGNED_BINARIES
+        bool "Sign binaries during build"
+        depends on SECURE_SIGNED_APPS
+        default y
+        help
+            Once secure boot or signed app requirement is enabled, app images are required to be signed.
+
+            If enabled (default), these binary files are signed as part of the build process. The file named in
+            "Secure boot private signing key" will be used to sign the image.
 
-config SECURE_SIGNED_ON_UPDATE
-    bool
-    default y
-    depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
+            If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py
+            (for example, on a remote signing server.)
+
+    config SECURE_BOOT_SIGNING_KEY
+        string "Secure boot private signing key"
+        depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
+        default "secure_boot_signing_key.pem"
+        help
+            Path to the key file used to sign app images.
 
-config SECURE_SIGNED_APPS
-   bool
-   default y
-   depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
+            Key file is an ECDSA private key (NIST256p curve) in PEM format.
+
+            Path is evaluated relative to the project directory.
 
+            You can generate a new signing key by running the following command:
+            espsecure.py generate_signing_key secure_boot_signing_key.pem
 
-config SECURE_SIGNED_APPS_NO_SECURE_BOOT
-    bool "Require signed app images"
-    default n
-    depends on !SECURE_BOOT_ENABLED
-    help
-        Require apps to be signed to verify their integrity.
+            See https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html for details.
 
-        This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it does not prevent the bootloader from being physically updated. This means that the device can be secured against remote network access, but not physical access. Compared to using hardware Secure Boot this option is much simpler to implement.
+    config SECURE_BOOT_VERIFICATION_KEY
+        string "Secure boot public signature verification key"
+        depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES
+        default "signature_verification_key.bin"
+        help
+            Path to a public key file used to verify signed images. This key is compiled into the bootloader and/or
+            app, to verify app images.
 
-config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
-    bool "Bootloader verifies app signatures"
-    default n
-    depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
-    help
-        If this option is set, the bootloader will be compiled with code to verify that an app is signed before booting it.
+            Key file is in raw binary format, and can be extracted from a
+            PEM formatted private key using the espsecure.py
+            extract_public_key command.
 
-        If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
-        If hardware secure boot is not enabled, this option doesn't add significant security by itself so most users will want to leave it disabled.
+            Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
 
-config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
-    bool "Verify app signature on update"
-    default y
-    depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
-    help
-         If this option is set, any OTA updated apps will have the signature verified before being considered valid.
+    choice SECURE_BOOTLOADER_KEY_ENCODING
+        bool "Hardware Key Encoding"
+        depends on SECURE_BOOTLOADER_REFLASHABLE
+        default SECURE_BOOTLOADER_KEY_ENCODING_256BIT
+        help
 
-         When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA updates,
-         or esp_image_format.h APIs are used to verify apps.
+            In reflashable secure bootloader mode, a hardware key is derived from the signing key (with SHA-256) and
+            can be written to eFuse with espefuse.py.
 
-         If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
-         If hardware secure boot is not enabled, this option still adds significant security against network-based attackers by preventing spoofing of OTA updates.
+            Normally this is a 256-bit key, but if 3/4 Coding Scheme is used on the device then the eFuse key is
+            truncated to 192 bits.
 
-config SECURE_BOOT_ENABLED
-    bool "Enable hardware secure boot in bootloader (READ DOCS FIRST)"
-    default n
-    help
-        Build a bootloader which enables secure boot on first boot.
+            This configuration item doesn't change any firmware code, it only changes the size of key binary which is
+            generated at build time.
 
-        Once enabled, secure boot will not boot a modified bootloader. The bootloader will only load a partition table or boot an app if the data has a verified digital signature. There are implications for reflashing updated apps once secure boot is enabled.
+        config SECURE_BOOTLOADER_KEY_ENCODING_256BIT
+            bool "No encoding (256 bit key)"
 
-        When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
+        config SECURE_BOOTLOADER_KEY_ENCODING_192BIT
+            bool "3/4 encoding (192 bit key)"
 
-        Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
+    endchoice
 
-choice SECURE_BOOTLOADER_MODE
-    bool "Secure bootloader mode"
-    depends on SECURE_BOOT_ENABLED
-    default SECURE_BOOTLOADER_ONE_TIME_FLASH
+    config SECURE_BOOT_INSECURE
+        bool "Allow potentially insecure options"
+        depends on SECURE_BOOT_ENABLED
+        default N
+        help
+            You can disable some of the default protections offered by secure boot, in order to enable testing or a
+            custom combination of security features.
 
-config SECURE_BOOTLOADER_ONE_TIME_FLASH
-       bool "One-time flash"
-       help
-           On first boot, the bootloader will generate a key which is not readable externally or by software. A digest is generated from the bootloader image itself. This digest will be verified on each subsequent boot.
+            Only enable these options if you are very sure.
 
-           Enabling this option means that the bootloader cannot be changed after the first time it is booted.
+            Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
 
-config SECURE_BOOTLOADER_REFLASHABLE
-    bool "Reflashable"
-    help
-        Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
+    config SECURE_FLASH_ENC_ENABLED
+        bool "Enable flash encryption on boot (READ DOCS FIRST)"
+        default N
+        help
+            If this option is set, flash contents will be encrypted by the bootloader on first boot.
 
-        This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing key.
+            Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
+            system is complicated and not always possible.
 
-        This option is less secure than one-time flash, because a leak of the digest key from one device allows reflashing of any device that uses it.
+            Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html
+            before enabling.
 
-endchoice
-
-config SECURE_BOOT_BUILD_SIGNED_BINARIES
-     bool "Sign binaries during build"
-     depends on SECURE_SIGNED_APPS
-     default y
-     help
-        Once secure boot or signed app requirement is enabled, app images are required to be signed.
-
-        If enabled (default), these binary files are signed as part of the build process. The file named in "Secure boot private signing key" will be used to sign the image.
-
-        If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py (for example, on a remote signing server.)
-
-config SECURE_BOOT_SIGNING_KEY
-     string "Secure boot private signing key"
-     depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
-     default secure_boot_signing_key.pem
-     help
-        Path to the key file used to sign app images.
-
-        Key file is an ECDSA private key (NIST256p curve) in PEM format.
-
-        Path is evaluated relative to the project directory.
-
-        You can generate a new signing key by running the following command:
-        espsecure.py generate_signing_key secure_boot_signing_key.pem
-
-        See docs/security/secure-boot.rst for details.
-
-config SECURE_BOOT_VERIFICATION_KEY
-    string "Secure boot public signature verification key"
-    depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES
-    default signature_verification_key.bin
-    help
-       Path to a public key file used to verify signed images. This key is compiled into the bootloader and/or app,
-       to verify app images.
-
-       Key file is in raw binary format, and can be extracted from a
-       PEM formatted private key using the espsecure.py
-       extract_public_key command.
-
-       Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
-
-choice SECURE_BOOTLOADER_KEY_ENCODING
-    bool "Hardware Key Encoding"
-    depends on SECURE_BOOTLOADER_REFLASHABLE
-    default SECURE_BOOTLOADER_NO_ENCODING
-    help
-
-    In reflashable secure bootloader mode, a hardware key is derived from the signing key (with SHA-256) and can be written to efuse
-    with espefuse.py.
-
-    Normally this is a 256-bit key, but if 3/4 Coding Scheme is used on the device then the efuse key is truncated to 192 bits.
-
-    This configuration item doesn't change any firmware code, it only changes the size of key binary which is generated at build time.
-
-config SECURE_BOOTLOADER_KEY_ENCODING_256BIT
-       bool "No encoding (256 bit key)"
-
-config SECURE_BOOTLOADER_KEY_ENCODING_192BIT
-       bool "3/4 encoding (192 bit key)"
-
-endchoice
-
-config SECURE_BOOT_INSECURE
-    bool "Allow potentially insecure options"
-    depends on SECURE_BOOT_ENABLED
-    default N
-    help
-       You can disable some of the default protections offered by secure boot, in order to enable testing or a custom combination of security features.
-
-       Only enable these options if you are very sure.
-
-       Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
-
-config FLASH_ENCRYPTION_ENABLED
-    bool "Enable flash encryption on boot (READ DOCS FIRST)"
-    default N
-    help
-       If this option is set, flash contents will be encrypted by the bootloader on first boot.
-
-       Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
-       system is complicated and not always possible.
-
-       Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html before enabling.
-
-config FLASH_ENCRYPTION_INSECURE
-    bool "Allow potentially insecure options"
-    depends on FLASH_ENCRYPTION_ENABLED
-    default N
-    help
-       You can disable some of the default protections offered by flash encryption, in order to enable testing or a custom combination of security features.
-
-       Only enable these options if you are very sure.
-
-       Refer to docs/security/secure-boot.rst and docs/security/flash-encryption.rst for details.
-
-menu "Potentially insecure options"
-    visible if FLASH_ENCRYPTION_INSECURE || SECURE_BOOT_INSECURE
-
-# NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
-# and/or FLASH_ENCRYPTION_INSECURE in "depends on", as the menu
-# itself doesn't enable/disable its children (if it's not set,
-# it's possible for the insecure menu to be disabled but the insecure option
-# to remain on which is very bad.)
-
-config SECURE_BOOT_ALLOW_ROM_BASIC
-       bool "Leave ROM BASIC Interpreter available on reset"
-       depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
-       default N
-       help
-          By default, the BASIC ROM Console starts on reset if no valid bootloader is
-          read from the flash.
-
-          When either flash encryption or secure boot are enabled, the default is to
-          disable this BASIC fallback mode permanently via efuse.
-
-          If this option is set, this efuse is not burned and the BASIC ROM Console may
-          remain accessible.  Only set this option in testing environments.
-
-config SECURE_BOOT_ALLOW_JTAG
-       bool "Allow JTAG Debugging"
-       depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
-       default N
-       help
-          If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot when either secure boot or flash encryption is enabled.
-
-          Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption and some of the protections of secure boot.
-
-          Only set this option in testing environments.
-
-config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
-       bool "Allow app partition length not 64KB aligned"
-       depends on SECURE_BOOT_INSECURE
-       help
-           If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB length, and the bootloader checks any trailing bytes after the signature (before the next 64KB boundary) have not been written. This is because flash cache maps entire 64KB pages into the address space. This prevents an attacker from appending unverified data after the app image in the flash, causing it to be mapped into the address space.
-
-           Setting this option allows the app partition length to be unaligned, and disables padding of the app image to this length. It is generally not recommended to set this option, unless you have a legacy partitioning scheme which doesn't support 64KB aligned partition lengths.
-
-config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_ENCRYPT
-    bool "Leave UART bootloader encryption enabled"
-    depends on FLASH_ENCRYPTION_INSECURE
-    default N
-    help
-        If not set (default), the bootloader will permanently disable UART bootloader encryption access on first boot. If set, the UART bootloader will still be able to access hardware encryption.
-
-        It is recommended to only set this option in testing environments.
-
-config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_DECRYPT
-    bool "Leave UART bootloader decryption enabled"
-    depends on FLASH_ENCRYPTION_INSECURE
-    default N
-    help
-        If not set (default), the bootloader will permanently disable UART bootloader decryption access on first boot. If set, the UART bootloader will still be able to access hardware decryption.
-
-        Only set this option in testing environments. Setting this option allows complete bypass of flash encryption.
-
-config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_CACHE
-    bool "Leave UART bootloader flash cache enabled"
-    depends on FLASH_ENCRYPTION_INSECURE
-    default N
-    help
-        If not set (default), the bootloader will permanently disable UART bootloader flash cache access on first boot. If set, the UART bootloader will still be able to access the flash cache.
-
-        Only set this option in testing environments.
-
-config SECURE_BOOT_TEST_MODE
-       bool "Secure boot test mode: don't permanently set any efuses"
-       depends on SECURE_BOOT_INSECURE
-       default N
-       help
-          If this option is set, all permanent secure boot changes (via Efuse) are disabled.
-
-          Log output will state changes which would be applied, but they will not be.
-
-          This option is for testing purposes only - it completely disables secure boot protection.
-
-
-endmenu  # Potentially Insecure
+    choice SECURE_FLASH_ENCRYPTION_KEYSIZE
+        bool "Size of generated AES-XTS key"
+        default SECURE_FLASH_ENCRYPTION_AES128
+        depends on IDF_TARGET_ESP32S2BETA && SECURE_FLASH_ENC_ENABLED
+        help
+            Size of generated AES-XTS key.
+
+            AES-128 uses a 256-bit key (32 bytes) which occupies one Efuse key block.
+            AES-256 uses a 512-bit key (64 bytes) which occupies two Efuse key blocks.
+
+            This setting is ignored if either type of key is already burned to Efuse before the first boot.
+            In this case, the pre-burned key is used and no new key is generated.
+
+        config SECURE_FLASH_ENCRYPTION_AES128
+            bool "AES-128 (256-bit key)"
+
+        config SECURE_FLASH_ENCRYPTION_AES256
+            bool "AES-256 (512-bit key)"
+    endchoice
+
+    choice SECURE_FLASH_ENCRYPTION_MODE
+        bool "Enable usage mode"
+        depends on SECURE_FLASH_ENC_ENABLED
+        default SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+        help
+            By default Development mode is enabled which allows UART bootloader to perform flash encryption operations
+
+            Select Release mode only for production or manufacturing. Once enabled you can not reflash using UART
+            bootloader
+
+            Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html and
+            https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html for details.
+
+        config SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            bool "Development(NOT SECURE)"
+            select SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
+
+        config SECURE_FLASH_ENCRYPTION_MODE_RELEASE
+            bool "Release"
+
+    endchoice
+
+    menu "Potentially insecure options"
+        visible if SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT || SECURE_BOOT_INSECURE
+
+        # NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
+        # and/or SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT in "depends on", as the menu
+        # itself doesn't enable/disable its children (if it's not set,
+        # it's possible for the insecure menu to be disabled but the insecure option
+        # to remain on which is very bad.)
+
+        config SECURE_BOOT_ALLOW_ROM_BASIC
+            bool "Leave ROM BASIC Interpreter available on reset"
+            depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                By default, the BASIC ROM Console starts on reset if no valid bootloader is
+                read from the flash.
+
+                When either flash encryption or secure boot are enabled, the default is to
+                disable this BASIC fallback mode permanently via eFuse.
+
+                If this option is set, this eFuse is not burned and the BASIC ROM Console may
+                remain accessible.  Only set this option in testing environments.
+
+        config SECURE_BOOT_ALLOW_JTAG
+            bool "Allow JTAG Debugging"
+            depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot
+                when either secure boot or flash encryption is enabled.
+
+                Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption
+                and some of the protections of secure boot.
+
+                Only set this option in testing environments.
+
+        config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
+            bool "Allow app partition length not 64KB aligned"
+            depends on SECURE_BOOT_INSECURE
+            help
+                If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB
+                length, and the bootloader checks any trailing bytes after the signature (before the next 64KB
+                boundary) have not been written. This is because flash cache maps entire 64KB pages into the address
+                space. This prevents an attacker from appending unverified data after the app image in the flash,
+                causing it to be mapped into the address space.
+
+                Setting this option allows the app partition length to be unaligned, and disables padding of the app
+                image to this length. It is generally not recommended to set this option, unless you have a legacy
+                partitioning scheme which doesn't support 64KB aligned partition lengths.
+
+        config SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
+            bool "Leave UART bootloader encryption enabled"
+            depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                If not set (default), the bootloader will permanently disable UART bootloader encryption access on
+                first boot. If set, the UART bootloader will still be able to access hardware encryption.
+
+                It is recommended to only set this option in testing environments.
+
+        config SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC
+            bool "Leave UART bootloader decryption enabled"
+            depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                If not set (default), the bootloader will permanently disable UART bootloader decryption access on
+                first boot. If set, the UART bootloader will still be able to access hardware decryption.
+
+                Only set this option in testing environments. Setting this option allows complete bypass of flash
+                encryption.
+
+        config SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE
+            bool "Leave UART bootloader flash cache enabled"
+            depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                If not set (default), the bootloader will permanently disable UART bootloader flash cache access on
+                first boot. If set, the UART bootloader will still be able to access the flash cache.
+
+                Only set this option in testing environments.
+
+        config SECURE_FLASH_REQUIRE_ALREADY_ENABLED
+            bool "Require flash encryption to be already enabled"
+            depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+            default N
+            help
+                If not set (default), and flash encryption is not yet enabled in eFuses, the 2nd stage bootloader
+                will enable flash encryption: generate the flash encryption key and program eFuses.
+                If this option is set, and flash encryption is not yet enabled, the bootloader will error out and
+                reboot.
+                If flash encryption is enabled in eFuses, this option does not change the bootloader behavior.
+
+                Only use this option in testing environments, to avoid accidentally enabling flash encryption on
+                the wrong device. The device needs to have flash encryption already enabled using espefuse.py.
+
+    endmenu  # Potentially Insecure
 endmenu  # Security features
+

components/bootloader/flash_bootloader_args.in

@@ -0,0 +1,4 @@
+--flash_mode ${ESPFLASHMODE}
+--flash_size ${ESPFLASHSIZE}
+--flash_freq ${ESPFLASHFREQ}
+${OFFSET} ${IMAGE}

components/bootloader/project_include.cmake

@@ -1,29 +1,130 @@
-if(BOOTLOADER_BUILD)
-    return()  # don't keep recursing!
+set(BOOTLOADER_OFFSET 0x1000)
+
+# Do not generate flash file when building bootloader
+if(BOOTLOADER_BUILD OR NOT CONFIG_APP_BUILD_BOOTLOADER)
+    return()
 endif()
 
 # Glue to build the bootloader subproject binary as an external
 # cmake project under this one
 #
 #
-set(bootloader_build_dir "${CMAKE_BINARY_DIR}/bootloader")
+idf_build_get_property(build_dir BUILD_DIR)
+set(BOOTLOADER_BUILD_DIR "${build_dir}/bootloader")
 set(bootloader_binary_files
-    "${bootloader_build_dir}/bootloader.elf"
-    "${bootloader_build_dir}/bootloader.bin"
-    "${bootloader_build_dir}/bootloader.map"
+    "${BOOTLOADER_BUILD_DIR}/bootloader.elf"
+    "${BOOTLOADER_BUILD_DIR}/bootloader.bin"
+    "${BOOTLOADER_BUILD_DIR}/bootloader.map"
     )
 
+idf_build_get_property(project_dir PROJECT_DIR)
+
+# There are some additional processing when CONFIG_CONFIG_SECURE_SIGNED_APPS. This happens
+# when either CONFIG_SECURE_BOOT_ENABLED or SECURE_BOOT_BUILD_SIGNED_BINARIES.
+# For both cases, the user either sets binaries to be signed during build or not
+# using CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES.
+#
+# Regardless, pass the main project's keys (signing/verification) to the bootloader subproject
+# via config.
+if(CONFIG_SECURE_SIGNED_APPS)
+    add_custom_target(gen_secure_boot_keys)
+
+    if(CONFIG_SECURE_BOOT_ENABLED)
+        # Check that the configuration is sane
+        if((CONFIG_SECURE_BOOTLOADER_REFLASHABLE AND CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH) OR
+            (NOT CONFIG_SECURE_BOOTLOADER_REFLASHABLE AND NOT CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH))
+            fail_at_build_time(bootloader "Invalid bootloader target: bad sdkconfig?")
+        endif()
+
+        if(CONFIG_SECURE_BOOTLOADER_REFLASHABLE)
+            set(bootloader_binary_files
+                ${bootloader_binary_files}
+                "${BOOTLOADER_BUILD_DIR}/bootloader-reflash-digest.bin"
+                "${BOOTLOADER_BUILD_DIR}/secure-bootloader-key-192.bin"
+                "${BOOTLOADER_BUILD_DIR}/secure-bootloader-key-256.bin"
+                )
+        endif()
+    endif()
+
+    # Since keys are usually given relative to main project dir, get the absolute paths to the keys
+    # for use by the bootloader subproject. Replace the values in config with these absolute paths,
+    # so that bootloader subproject does not need to assume main project dir to obtain path to the keys.
+    if(CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES)
+        get_filename_component(secure_boot_signing_key
+            "${CONFIG_SECURE_BOOT_SIGNING_KEY}"
+            ABSOLUTE BASE_DIR "${project_dir}")
+
+        if(NOT EXISTS ${secure_boot_signing_key})
+            # If the signing key is not found, create a phony gen_secure_boot_signing_key target that
+            # fails the build. fail_at_build_time causes a cmake run next time
+            # (to pick up a new signing key if one exists, etc.)
+            fail_at_build_time(gen_secure_boot_signing_key
+                "Secure Boot Signing Key ${CONFIG_SECURE_BOOT_SIGNING_KEY} does not exist. Generate using:"
+                "\tespsecure.py generate_signing_key ${CONFIG_SECURE_BOOT_SIGNING_KEY}")
+        else()
+            add_custom_target(gen_secure_boot_signing_key)
+        endif()
+
+        set(SECURE_BOOT_SIGNING_KEY ${secure_boot_signing_key}) # needed by some other components
+        set(sign_key_arg "-DSECURE_BOOT_SIGNING_KEY=${secure_boot_signing_key}")
+        set(ver_key_arg)
+
+        add_dependencies(gen_secure_boot_keys gen_secure_boot_signing_key)
+    else()
+
+        get_filename_component(secure_boot_verification_key
+            ${CONFIG_SECURE_BOOT_VERIFICATION_KEY}
+            ABSOLUTE BASE_DIR "${project_dir}")
+
+        if(NOT EXISTS ${secure_boot_verification_key})
+            # If the verification key is not found, create a phony gen_secure_boot_verification_key target that
+            # fails the build. fail_at_build_time causes a cmake run next time
+            # (to pick up a new verification key if one exists, etc.)
+            fail_at_build_time(gen_secure_boot_verification_key
+                "Secure Boot Verification Public Key ${CONFIG_SECURE_BOOT_VERIFICATION_KEY} does not exist."
+                "\tThis can be extracted from the private signing key."
+                "\tSee docs/security/secure-boot.rst for details.")
+        else()
+            add_custom_target(gen_secure_boot_verification_key)
+        endif()
+
+        set(sign_key_arg)
+        set(ver_key_arg "-DSECURE_BOOT_VERIFICATION_KEY=${secure_boot_verification_key}")
+
+        add_dependencies(gen_secure_boot_keys gen_secure_boot_verification_key)
+    endif()
+else()
+    set(sign_key_arg)
+    set(ver_key_arg)
+endif()
+
+idf_build_get_property(idf_path IDF_PATH)
+idf_build_get_property(idf_target IDF_TARGET)
+idf_build_get_property(sdkconfig SDKCONFIG)
+idf_build_get_property(python PYTHON)
+idf_build_get_property(extra_cmake_args EXTRA_CMAKE_ARGS)
+
 externalproject_add(bootloader
-    # TODO: support overriding the bootloader in COMPONENT_PATHS
-    SOURCE_DIR "${IDF_PATH}/components/bootloader/subproject"
-    BINARY_DIR "${bootloader_build_dir}"
-    CMAKE_ARGS  -DSDKCONFIG=${SDKCONFIG} -DIDF_PATH=${IDF_PATH} -DEXTRA_COMPONENT_DIRS=${COMPONENT_DIRS}
-                -DTESTS_ALL=0 -DTEST_COMPONENTS=""
+    SOURCE_DIR "${CMAKE_CURRENT_LIST_DIR}/subproject"
+    BINARY_DIR "${BOOTLOADER_BUILD_DIR}"
+    CMAKE_ARGS  -DSDKCONFIG=${sdkconfig} -DIDF_PATH=${idf_path} -DIDF_TARGET=${idf_target}
+                -DPYTHON_DEPS_CHECKED=1 -DPYTHON=${python}
+                -DEXTRA_COMPONENT_DIRS=${CMAKE_CURRENT_LIST_DIR}
+                ${sign_key_arg} ${ver_key_arg}
+                # LEGACY_INCLUDE_COMMON_HEADERS has to be passed in via cache variable since
+                # the bootloader common component requirements depends on this and
+                # config variables are not available before project() call.
+                -DLEGACY_INCLUDE_COMMON_HEADERS=${CONFIG_LEGACY_INCLUDE_COMMON_HEADERS}
+                ${extra_cmake_args}
     INSTALL_COMMAND ""
     BUILD_ALWAYS 1  # no easy way around this...
     BUILD_BYPRODUCTS ${bootloader_binary_files}
     )
 
+if(CONFIG_SECURE_SIGNED_APPS)
+    add_dependencies(bootloader gen_secure_boot_keys)
+endif()
+
 # this is a hack due to an (annoying) shortcoming in cmake, it can't
 # extend the 'clean' target to the external project
 # see thread: https://cmake.org/pipermail/cmake/2016-December/064660.html

components/bootloader/sdkconfig.rename

@@ -0,0 +1,22 @@
+# sdkconfig replacement configurations for deprecated options formatted as
+# CONFIG_DEPRECATED_OPTION CONFIG_NEW_OPTION
+
+CONFIG_LOG_BOOTLOADER_LEVEL                                 CONFIG_BOOTLOADER_LOG_LEVEL
+CONFIG_LOG_BOOTLOADER_LEVEL_NONE                            CONFIG_BOOTLOADER_LOG_LEVEL_NONE
+CONFIG_LOG_BOOTLOADER_LEVEL_ERROR                           CONFIG_BOOTLOADER_LOG_LEVEL_ERROR
+CONFIG_LOG_BOOTLOADER_LEVEL_WARN                            CONFIG_BOOTLOADER_LOG_LEVEL_WARN
+CONFIG_LOG_BOOTLOADER_LEVEL_INFO                            CONFIG_BOOTLOADER_LOG_LEVEL_INFO
+CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG                           CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG
+CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE                         CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE
+
+CONFIG_APP_ROLLBACK_ENABLE                                  CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE
+CONFIG_APP_ANTI_ROLLBACK                                    CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK
+CONFIG_APP_SECURE_VERSION                                   CONFIG_BOOTLOADER_APP_SECURE_VERSION
+CONFIG_APP_SECURE_VERSION_SIZE_EFUSE_FIELD                  CONFIG_BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD
+CONFIG_EFUSE_SECURE_VERSION_EMULATE                         CONFIG_BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE
+
+CONFIG_FLASH_ENCRYPTION_ENABLED                             CONFIG_SECURE_FLASH_ENC_ENABLED
+CONFIG_FLASH_ENCRYPTION_INSECURE                            CONFIG_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+CONFIG_FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_ENCRYPT       CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
+CONFIG_FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_DECRYPT       CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC
+CONFIG_FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_CACHE         CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE

components/bootloader/subproject/CMakeLists.txt

@@ -10,19 +10,120 @@ if(NOT IDF_PATH)
         "in by the parent build process.")
 endif()
 
-set(COMPONENTS bootloader esptool_py esp32 partition_table soc bootloader_support log spi_flash micro-ecc soc main)
+if(NOT IDF_TARGET)
+    message(FATAL_ERROR "Bootloader subproject expects the IDF_TARGET variable to be passed "
+        "in by the parent build process.")
+endif()
+
+set(COMPONENTS bootloader esptool_py partition_table soc bootloader_support log spi_flash micro-ecc main efuse)
 set(BOOTLOADER_BUILD 1)
-add_definitions(-DBOOTLOADER_BUILD=1)
-
-set(COMPONENT_REQUIRES_COMMON log esp32 soc)
-
 include("${IDF_PATH}/tools/cmake/project.cmake")
+set(common_req log esp_rom esp_common xtensa)
+if(LEGACY_INCLUDE_COMMON_HEADERS)
+    list(APPEND common_req soc)
+endif()
+idf_build_set_property(__COMPONENT_REQUIRES_COMMON "${common_req}")
+idf_build_set_property(__OUTPUT_SDKCONFIG 0)
 project(bootloader)
 
-target_linker_script(bootloader.elf
-    "main/esp32.bootloader.ld"
-    "main/esp32.bootloader.rom.ld")
-# Imported from esp32 component
-target_linker_script(bootloader.elf ${ESP32_BOOTLOADER_LINKER_SCRIPTS})
+idf_build_set_property(COMPILE_DEFINITIONS "-DBOOTLOADER_BUILD=1" APPEND)
+idf_build_set_property(COMPILE_OPTIONS "-fno-stack-protector" APPEND)
 
-target_link_libraries(bootloader.elf gcc)
+string(REPLACE ";" " " espsecurepy "${ESPSECUREPY}")
+string(REPLACE ";" " " espefusepy "${ESPEFUSEPY}")
+set(esptoolpy_write_flash "${ESPTOOLPY_WRITE_FLASH_STR}")
+
+if(CONFIG_SECURE_BOOTLOADER_REFLASHABLE)
+    if(CONFIG_SECURE_BOOTLOADER_KEY_ENCODING_192BIT)
+        set(key_digest_len 192)
+    else()
+        set(key_digest_len 256)
+    endif()
+
+    get_filename_component(bootloader_digest_bin
+        "bootloader-reflash-digest.bin"
+        ABSOLUTE BASE_DIR "${CMAKE_BINARY_DIR}")
+
+    get_filename_component(secure_bootloader_key
+        "secure-bootloader-key-${key_digest_len}.bin"
+        ABSOLUTE BASE_DIR "${CMAKE_BINARY_DIR}")
+
+    add_custom_command(OUTPUT "${secure_bootloader_key}"
+        COMMAND ${ESPSECUREPY} digest_private_key
+            --keylen "${key_digest_len}"
+            --keyfile "${SECURE_BOOT_SIGNING_KEY}"
+            "${secure_bootloader_key}"
+        VERBATIM)
+
+    if(CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES)
+        add_custom_target(gen_secure_bootloader_key ALL DEPENDS "${secure_bootloader_key}")
+    else()
+        if(NOT EXISTS "${secure_bootloader_key}")
+            message(FATAL_ERROR
+                "No pre-generated key for a reflashable secure bootloader is available, "
+                "due to signing configuration."
+                "\nTo generate one, you can use this command:"
+                "\n\t${espsecurepy} generate_flash_encryption_key ${secure_bootloader_key}"
+                "\nIf a signing key is present, then instead use:"
+                "\n\t${espsecurepy} digest_private_key "
+                "--keylen (192/256) --keyfile KEYFILE "
+                "${secure_bootloader_key}")
+        endif()
+        add_custom_target(gen_secure_bootloader_key)
+    endif()
+
+    add_custom_command(OUTPUT "${bootloader_digest_bin}"
+        COMMAND ${CMAKE_COMMAND} -E echo "DIGEST ${bootloader_digest_bin}"
+        COMMAND ${ESPSECUREPY} digest_secure_bootloader --keyfile "${secure_bootloader_key}"
+        -o "${bootloader_digest_bin}" "${CMAKE_BINARY_DIR}/bootloader.bin"
+        MAIN_DEPENDENCY "${CMAKE_BINARY_DIR}/.bin_timestamp"
+        DEPENDS gen_secure_bootloader_key gen_project_binary
+        VERBATIM)
+
+    add_custom_target (gen_bootloader_digest_bin ALL DEPENDS "${bootloader_digest_bin}")
+endif()
+
+if(CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH)
+    add_custom_command(TARGET bootloader.elf POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "=============================================================================="
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "Bootloader built. Secure boot enabled, so bootloader not flashed automatically."
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "One-time flash command is:"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "\t${esptoolpy_write_flash} ${BOOTLOADER_OFFSET} ${CMAKE_BINARY_DIR}/bootloader.bin"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "* IMPORTANT: After first boot, BOOTLOADER CANNOT BE RE-FLASHED on same device"
+        VERBATIM)
+elseif(CONFIG_SECURE_BOOTLOADER_REFLASHABLE)
+    add_custom_command(TARGET bootloader.elf POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "=============================================================================="
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "Bootloader built and secure digest generated."
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "Secure boot enabled, so bootloader not flashed automatically."
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "Burn secure boot key to efuse using:"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "\t${espefusepy} burn_key secure_boot ${secure_bootloader_key}"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "First time flash command is:"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "\t${esptoolpy_write_flash} ${BOOTLOADER_OFFSET} ${CMAKE_BINARY_DIR}/bootloader.bin"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "=============================================================================="
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "To reflash the bootloader after initial flash:"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "\t${esptoolpy_write_flash} 0x0 ${bootloader_digest_bin}"
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "=============================================================================="
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "* After first boot, only re-flashes of this kind (with same key) will be accepted."
+        COMMAND ${CMAKE_COMMAND} -E echo
+            "* Not recommended to re-use the same secure boot keyfile on multiple production devices."
+        DEPENDS gen_secure_bootloader_key gen_bootloader_digest_bin
+        VERBATIM)
+endif()

components/bootloader/subproject/Makefile

@@ -8,14 +8,17 @@ endif
 
 PROJECT_NAME := bootloader
 
-COMPONENTS := esptool_py bootloader_support log spi_flash micro-ecc soc main
+COMPONENTS := esptool_py bootloader_support log spi_flash micro-ecc soc main efuse
 
 # Clear C and CXX from top level project
 CFLAGS =
 CXXFLAGS =
 
-#We cannot include the esp32 component directly but we need its includes.
-CFLAGS += -I $(IDF_PATH)/components/esp32/include
+#We cannot include the idf_target, esp_rom, esp_common component directly but we need their includes.
+CFLAGS += -I $(IDF_PATH)/components/$(IDF_TARGET)/include
+CFLAGS += -I $(IDF_PATH)/components/esp_rom/include
+CFLAGS += -I $(IDF_PATH)/components/esp_common/include
+CFLAGS += -I $(IDF_PATH)/components/xtensa/include -I $(IDF_PATH)/components/xtensa/$(IDF_TARGET)/include
 
 # The bootloader pseudo-component is also included in this build, for its Kconfig.projbuild to be included.
 #

components/bootloader/subproject/components/micro-ecc/CMakeLists.txt

@@ -0,0 +1,3 @@
+# only compile the "micro-ecc/uECC.c" source file
+idf_component_register(SRCS "micro-ecc/uECC.c"
+                    INCLUDE_DIRS micro-ecc)

components/bootloader/subproject/main/CMakeLists.txt

@@ -1,4 +1,9 @@
-set(COMPONENT_SRCS "bootloader_start.c")
-set(COMPONENT_ADD_INCLUDEDIRS "")
-set(COMPONENT_REQUIRES "bootloader bootloader_support")
-register_component()
+idf_component_register(SRCS "bootloader_start.c"
+                    REQUIRES bootloader bootloader_support)
+
+idf_build_get_property(target IDF_TARGET)
+set(scripts "ld/${target}/bootloader.ld"
+            "ld/${target}/bootloader.rom.ld")
+
+target_linker_script(${COMPONENT_LIB} INTERFACE "${scripts}")
+

components/bootloader/subproject/main/Makefile.projbuild

@@ -1,4 +0,0 @@
-# Submodules normally added in component.mk, but fully qualified
-# paths can be added at this level (we need binary librtc to be
-# available to link bootloader).
-COMPONENT_SUBMODULES += $(IDF_PATH)/components/esp32/lib

components/bootloader/subproject/main/bootloader_start.c

@@ -1,4 +1,4 @@
-// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
@@ -11,38 +11,39 @@
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.
-#include <string.h>
-#include <stdint.h>
 #include <stdbool.h>
-
 #include "esp_log.h"
-#include "rom/gpio.h"
-#include "rom/spi_flash.h"
-#include "bootloader_config.h"
 #include "bootloader_init.h"
 #include "bootloader_utility.h"
 #include "bootloader_common.h"
-#include "sdkconfig.h"
-#include "esp_image_format.h"
 
-static const char* TAG = "boot";
+static const char *TAG = "boot";
 
-static int select_partition_number (bootloader_state_t *bs);
+static int select_partition_number(bootloader_state_t *bs);
 static int selected_boot_partition(const bootloader_state_t *bs);
+
 /*
  * We arrive here after the ROM bootloader finished loading this second stage bootloader from flash.
  * The hardware is mostly uninitialized, flash cache is down and the app CPU is in reset.
  * We do have a stack, so we can do the initialization in C.
  */
-void __attribute__((noreturn)) call_start_cpu0()
+void __attribute__((noreturn)) call_start_cpu0(void)
 {
     // 1. Hardware initialization
     if (bootloader_init() != ESP_OK) {
         bootloader_reset();
     }
 
+#ifdef CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP
+    // If this boot is a wake up from the deep sleep then go to the short way,
+    // try to load the application which worked before deep sleep.
+    // It skips a lot of checks due to it was done before (while first boot).
+    bootloader_utility_load_boot_image_from_deep_sleep();
+    // If it is not successful try to load an application as usual.
+#endif
+
     // 2. Select the number of boot partition
-    bootloader_state_t bs = { 0 };
+    bootloader_state_t bs = {0};
     int boot_index = select_partition_number(&bs);
     if (boot_index == INVALID_INDEX) {
         bootloader_reset();
@@ -53,7 +54,7 @@ void __attribute__((noreturn)) call_start_cpu0()
 }
 
 // Select the number of boot partition
-static int select_partition_number (bootloader_state_t *bs)
+static int select_partition_number(bootloader_state_t *bs)
 {
     // 1. Load partition table
     if (!bootloader_utility_load_partition_table(bs)) {
@@ -74,7 +75,8 @@ static int selected_boot_partition(const bootloader_state_t *bs)
     int boot_index = bootloader_utility_get_selected_boot_partition(bs);
     if (boot_index == INVALID_INDEX) {
         return boot_index; // Unrecoverable failure (not due to corrupt ota data or bad partition contents)
-    } else {
+    }
+    if (bootloader_common_get_reset_reason(0) != DEEPSLEEP_RESET) {
         // Factory firmware.
 #ifdef CONFIG_BOOTLOADER_FACTORY_RESET
         if (bootloader_common_check_long_hold_gpio(CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET, CONFIG_BOOTLOADER_HOLD_TIME_GPIO) == 1) {
@@ -91,7 +93,7 @@ static int selected_boot_partition(const bootloader_state_t *bs)
             return bootloader_utility_get_selected_boot_partition(bs);
         }
 #endif
-       // TEST firmware.
+        // TEST firmware.
 #ifdef CONFIG_BOOTLOADER_APP_TEST
         if (bootloader_common_check_long_hold_gpio(CONFIG_BOOTLOADER_NUM_PIN_APP_TEST, CONFIG_BOOTLOADER_HOLD_TIME_GPIO) == 1) {
             ESP_LOGI(TAG, "Detect a boot condition of the test firmware");
@@ -111,3 +113,9 @@ static int selected_boot_partition(const bootloader_state_t *bs)
     }
     return boot_index;
 }
+
+// Return global reent struct if any newlib functions are linked to bootloader
+struct _reent *__getreent(void)
+{
+    return _GLOBAL_REENT;
+}

components/bootloader/subproject/main/component.mk

@@ -6,14 +6,17 @@
 #
 
 LINKER_SCRIPTS := \
-	esp32.bootloader.ld \
-	$(IDF_PATH)/components/esp32/ld/esp32.rom.ld \
-	$(IDF_PATH)/components/esp32/ld/esp32.rom.spiram_incompatible_fns.ld \
-	$(IDF_PATH)/components/esp32/ld/esp32.peripherals.ld \
-	esp32.bootloader.rom.ld
+    $(COMPONENT_PATH)/ld/$(IDF_TARGET)/bootloader.ld \
+    $(COMPONENT_PATH)/ld/$(IDF_TARGET)/bootloader.rom.ld \
+    $(IDF_PATH)/components/esp_rom/$(IDF_TARGET)/ld/$(IDF_TARGET).rom.ld \
+    $(IDF_PATH)/components/esp_rom/$(IDF_TARGET)/ld/$(IDF_TARGET).rom.newlib-funcs.ld \
+    $(IDF_PATH)/components/$(IDF_TARGET)/ld/$(IDF_TARGET).peripherals.ld
 
-ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
-LINKER_SCRIPTS += $(IDF_PATH)/components/esp32/ld/esp32.rom.spiflash.ld
+# SPI driver patch for ROM is only needed in ESP32
+ifdef CONFIG_IDF_TARGET_ESP32
+    ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
+        LINKER_SCRIPTS += $(IDF_PATH)/components/esp_rom/$(IDF_TARGET)/ld/$(IDF_TARGET).rom.spiflash.ld
+    endif
 endif
 
 COMPONENT_ADD_LDFLAGS += -L $(COMPONENT_PATH) $(addprefix -T ,$(LINKER_SCRIPTS))

components/bootloader/subproject/main/esp32.bootloader.ld

@@ -1,170 +0,0 @@
-/*
-Linker file used to link the bootloader.
-*/
-
-
-/* Simplified memory map for the bootloader
-
-   The main purpose is to make sure the bootloader can load into main memory
-   without overwriting itself.
-*/
-
-MEMORY
-{
-  /* I/O */
-  dport0_seg (RW) :                 	org = 0x3FF00000, len = 0x10
-  /* IRAM POOL1, used for APP CPU cache. Bootloader runs from here during the final stage of loading the app because APP CPU is still held in reset, the main app enables APP CPU cache */
-  iram_loader_seg (RWX) :           org = 0x40078000, len = 0x8000  /* 32KB, APP CPU cache */
-  /* 63kB, IRAM. We skip the first 1k to prevent the entry point being
-     placed into the same range as exception vectors in the app.
-     This leads to idf_monitor decoding ROM bootloader "entry 0x40080xxx"
-     message as one of the exception vectors, which looks scary to users.
-  */
-  iram_seg (RWX) :                  org = 0x40080400, len = 0xfc00
-  /* 64k at the end of DRAM, after ROM bootloader stack */
-  dram_seg (RW) :                  	org = 0x3FFF0000, len = 0x10000
-}
-
-/*  Default entry point:  */
-ENTRY(call_start_cpu0);
-
-
-SECTIONS
-{
-
-  .iram_loader.text :
-  {
-    . = ALIGN (16);
-    _stext = .;
-    _loader_text_start = ABSOLUTE(.);
-    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
-     *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
-    *liblog.a:(.literal .text .literal.* .text.*)
-    *libgcc.a:(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_common.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:efuse.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:secure_boot_signatures.*(.literal .text .literal.* .text.*)
-    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
-    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
-    *libsoc.a:rtc_wdt.*(.literal .text .literal.* .text.*)
-    *(.fini.literal)
-    *(.fini)
-    *(.gnu.version)
-    _loader_text_end = ABSOLUTE(.);
-    _etext = .;
-  } > iram_loader_seg
-
-  .iram.text :
-  {
-    . = ALIGN (16);
-    *(.entry.text)
-    *(.init.literal)
-    *(.init)
-  } > iram_seg
-
-
-  /* Shared RAM */
-  .dram0.bss (NOLOAD) :
-  {
-    . = ALIGN (8);
-    _bss_start = ABSOLUTE(.);
-    *(.dynsbss)
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-    *(.sbss2)
-    *(.sbss2.*)
-    *(.gnu.linkonce.sb2.*)
-    *(.dynbss)
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN (8);
-    _bss_end = ABSOLUTE(.);
-  } >dram_seg
-
-  .dram0.data :
-  {
-    _data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    *(.data1)
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-    *(.sdata2)
-    *(.sdata2.*)
-    *(.gnu.linkonce.s2.*)
-    *(.jcr)
-    _data_end = ABSOLUTE(.);
-  } >dram_seg
-
-  .dram0.rodata :
-  {
-    _rodata_start = ABSOLUTE(.);
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-    *(.rodata1)
-    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
-    *(.xt_except_table)
-    *(.gcc_except_table)
-    *(.gnu.linkonce.e.*)
-    *(.gnu.version_r)
-    *(.eh_frame)
-    . = (. + 3) & ~ 3;
-    /*  C++ constructor and destructor tables, properly ordered:  */
-    __init_array_start = ABSOLUTE(.);
-    KEEP (*crtbegin.*(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    __init_array_end = ABSOLUTE(.);
-    KEEP (*crtbegin.*(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    /*  C++ exception handlers table:  */
-    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
-    *(.xt_except_desc)
-    *(.gnu.linkonce.h.*)
-    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
-    *(.xt_except_desc_end)
-    *(.dynamic)
-    *(.gnu.version_d)
-    _rodata_end = ABSOLUTE(.);
-	/* Literals are also RO data. */
-    _lit4_start = ABSOLUTE(.);
-    *(*.lit4)
-    *(.lit4.*)
-    *(.gnu.linkonce.lit4.*)
-    _lit4_end = ABSOLUTE(.);
-    . = ALIGN(4);
-    _heap_start = ABSOLUTE(.);
-  } >dram_seg
-
-  .iram.text :
-  {
-    _stext = .;
-    _text_start = ABSOLUTE(.);
-    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
-    *(.iram .iram.*) /* catch stray IRAM_ATTR */
-    *(.fini.literal)
-    *(.fini)
-    *(.gnu.version)
-    _text_end = ABSOLUTE(.);
-    _etext = .;
-  } > iram_seg
-
-}

components/bootloader/subproject/main/esp32.bootloader.rom.ld

@@ -1,4 +0,0 @@
-PROVIDE ( ets_update_cpu_frequency = 0x40008550 ); /* Updates g_ticks_per_us on the current CPU only; not on the other core */
-PROVIDE ( MD5Final = 0x4005db1c );
-PROVIDE ( MD5Init = 0x4005da7c );
-PROVIDE ( MD5Update = 0x4005da9c );

components/bootloader/subproject/main/ld/esp32/bootloader.ld

@@ -0,0 +1,169 @@
+/*
+Linker file used to link the bootloader.
+*/
+
+
+/* Simplified memory map for the bootloader
+
+   The main purpose is to make sure the bootloader can load into main memory
+   without overwriting itself.
+*/
+
+MEMORY
+{
+  /* I/O */
+  dport0_seg (RW) :                 	org = 0x3FF00000, len = 0x10
+  /* IRAM POOL1, used for APP CPU cache. Bootloader runs from here during the final stage of loading the app because APP CPU is still held in reset, the main app enables APP CPU cache */
+  iram_loader_seg (RWX) :           org = 0x40078000, len = 0x8000  /* 32KB, APP CPU cache */
+  /* 63kB, IRAM. We skip the first 1k to prevent the entry point being
+     placed into the same range as exception vectors in the app.
+     This leads to idf_monitor decoding ROM bootloader "entry 0x40080xxx"
+     message as one of the exception vectors, which looks scary to users.
+  */
+  iram_seg (RWX) :                  org = 0x40080400, len = 0xfc00
+  /* 64k at the end of DRAM, after ROM bootloader stack */
+  dram_seg (RW) :                  	org = 0x3FFF0000, len = 0x10000
+}
+
+/*  Default entry point:  */
+ENTRY(call_start_cpu0);
+
+
+SECTIONS
+{
+
+  .iram_loader.text :
+  {
+    . = ALIGN (16);
+    _loader_text_start = ABSOLUTE(.);
+    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+     *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
+    *liblog.a:(.literal .text .literal.* .text.*)
+    *libgcc.a:(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_clock.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_common.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_signatures.*(.literal .text .literal.* .text.*)
+    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
+    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
+    *libsoc.a:rtc_wdt.*(.literal .text .literal.* .text.*)
+    *libsoc.a:rtc_clk.*(.literal .text .literal.* .text.*)
+    *libefuse.a:*.*(.literal .text .literal.* .text.*)
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _loader_text_end = ABSOLUTE(.);
+  } > iram_loader_seg
+
+  .iram.text :
+  {
+    . = ALIGN (16);
+    *(.entry.text)
+    *(.init.literal)
+    *(.init)
+  } > iram_seg
+
+
+  /* Shared RAM */
+  .dram0.bss (NOLOAD) :
+  {
+    . = ALIGN (8);
+    _bss_start = ABSOLUTE(.);
+    *(.dynsbss)
+    *(.sbss)
+    *(.sbss.*)
+    *(.gnu.linkonce.sb.*)
+    *(.scommon)
+    *(.sbss2)
+    *(.sbss2.*)
+    *(.gnu.linkonce.sb2.*)
+    *(.dynbss)
+    *(.bss)
+    *(.bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN (8);
+    _bss_end = ABSOLUTE(.);
+  } >dram_seg
+
+  .dram0.data :
+  {
+    _data_start = ABSOLUTE(.);
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d.*)
+    *(.data1)
+    *(.sdata)
+    *(.sdata.*)
+    *(.gnu.linkonce.s.*)
+    *(.sdata2)
+    *(.sdata2.*)
+    *(.gnu.linkonce.s2.*)
+    *(.jcr)
+    _data_end = ABSOLUTE(.);
+  } >dram_seg
+
+  .dram0.rodata :
+  {
+    _rodata_start = ABSOLUTE(.);
+    *(.rodata)
+    *(.rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.rodata1)
+    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
+    *(.xt_except_table)
+    *(.gcc_except_table)
+    *(.gnu.linkonce.e.*)
+    *(.gnu.version_r)
+    *(.eh_frame)
+    . = (. + 3) & ~ 3;
+    /*  C++ constructor and destructor tables, properly ordered:  */
+    __init_array_start = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __init_array_end = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    /*  C++ exception handlers table:  */
+    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
+    *(.xt_except_desc)
+    *(.gnu.linkonce.h.*)
+    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+    *(.xt_except_desc_end)
+    *(.dynamic)
+    *(.gnu.version_d)
+    _rodata_end = ABSOLUTE(.);
+	/* Literals are also RO data. */
+    _lit4_start = ABSOLUTE(.);
+    *(*.lit4)
+    *(.lit4.*)
+    *(.gnu.linkonce.lit4.*)
+    _lit4_end = ABSOLUTE(.);
+    . = ALIGN(4);
+  } >dram_seg
+
+  .iram.text :
+  {
+    _stext = .;
+    _text_start = ABSOLUTE(.);
+    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram .iram.*) /* catch stray IRAM_ATTR */
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _text_end = ABSOLUTE(.);
+    _etext = .;
+  } > iram_seg
+
+}

components/bootloader/subproject/main/ld/esp32/bootloader.rom.ld

@@ -0,0 +1,9 @@
+PROVIDE ( ets_update_cpu_frequency = 0x40008550 ); /* Updates g_ticks_per_us on the current CPU only; not on the other core */
+PROVIDE ( MD5Final = 0x4005db1c );
+PROVIDE ( MD5Init = 0x4005da7c );
+PROVIDE ( MD5Update = 0x4005da9c );
+
+/* bootloader will use following functions from xtensa hal library */
+xthal_get_ccount = 0x4000c050;
+xthal_get_ccompare = 0x4000c078;
+xthal_set_ccompare = 0x4000c058;

components/bootloader/subproject/main/ld/esp32s2beta/bootloader.ld

@@ -0,0 +1,162 @@
+/*
+Linker file used to link the bootloader.
+*/
+
+
+/* Simplified memory map for the bootloader
+
+   The main purpose is to make sure the bootloader can load into main memory
+   without overwriting itself.
+*/
+
+MEMORY
+{
+  /* I/O */
+  dport0_seg (RW) :                 org = 0x3FF00000, len = 0x10
+  iram_loader_seg (RWX) :           org = 0x40062000, len = 0x4000  /* 16KB, IRAM */
+  iram_seg (RWX) :                  org = 0x40066000, len = 0x4000  /* 16KB, IRAM */
+  /* 8k at the end of DRAM, before ROM data & stack */
+  dram_seg (RW) :                   org = 0x3FFFA000, len = 0x2000
+}
+
+/*  Default entry point:  */
+ENTRY(call_start_cpu0);
+
+
+SECTIONS
+{
+
+  .iram_loader.text :
+  {
+    . = ALIGN (16);
+    _loader_text_start = ABSOLUTE(.);
+    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+     *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
+    *liblog.a:(.literal .text .literal.* .text.*)
+    *libgcc.a:(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_common.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_signatures.*(.literal .text .literal.* .text.*)
+    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
+    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
+    *libsoc.a:rtc_wdt.*(.literal .text .literal.* .text.*)
+    *libefuse.a:*.*(.literal .text .literal.* .text.*)
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _loader_text_end = ABSOLUTE(.);
+  } > iram_loader_seg
+
+  .iram.text :
+  {
+    . = ALIGN (16);
+    *(.entry.text)
+    *(.init.literal)
+    *(.init)
+  } > iram_seg
+
+
+  /* Shared RAM */
+  .dram0.bss (NOLOAD) :
+  {
+    . = ALIGN (8);
+    _bss_start = ABSOLUTE(.);
+    *(.dynsbss)
+    *(.sbss)
+    *(.sbss.*)
+    *(.gnu.linkonce.sb.*)
+    *(.scommon)
+    *(.sbss2)
+    *(.sbss2.*)
+    *(.gnu.linkonce.sb2.*)
+    *(.dynbss)
+    *(.bss)
+    *(.bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN (8);
+    _bss_end = ABSOLUTE(.);
+  } >dram_seg
+
+  .dram0.data :
+  {
+    _data_start = ABSOLUTE(.);
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d.*)
+    *(.data1)
+    *(.sdata)
+    *(.sdata.*)
+    *(.gnu.linkonce.s.*)
+    *(.sdata2)
+    *(.sdata2.*)
+    *(.gnu.linkonce.s2.*)
+    *(.jcr)
+    _data_end = ABSOLUTE(.);
+  } >dram_seg
+
+  .dram0.rodata :
+  {
+    _rodata_start = ABSOLUTE(.);
+    *(.rodata)
+    *(.rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.rodata1)
+    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
+    *(.xt_except_table)
+    *(.gcc_except_table)
+    *(.gnu.linkonce.e.*)
+    *(.gnu.version_r)
+    *(.eh_frame)
+    . = (. + 3) & ~ 3;
+    /*  C++ constructor and destructor tables, properly ordered:  */
+    __init_array_start = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __init_array_end = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    /*  C++ exception handlers table:  */
+    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
+    *(.xt_except_desc)
+    *(.gnu.linkonce.h.*)
+    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+    *(.xt_except_desc_end)
+    *(.dynamic)
+    *(.gnu.version_d)
+    _rodata_end = ABSOLUTE(.);
+	/* Literals are also RO data. */
+    _lit4_start = ABSOLUTE(.);
+    *(*.lit4)
+    *(.lit4.*)
+    *(.gnu.linkonce.lit4.*)
+    _lit4_end = ABSOLUTE(.);
+    . = ALIGN(4);
+    _heap_start = ABSOLUTE(.);
+  } >dram_seg
+
+  .iram.text :
+  {
+    _stext = .;
+    _text_start = ABSOLUTE(.);
+    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram .iram.*) /* catch stray IRAM_ATTR */
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _text_end = ABSOLUTE(.);
+    _etext = .;
+  } > iram_seg
+
+}

components/bootloader/subproject/main/ld/esp32s2beta/bootloader.rom.ld

@@ -0,0 +1,14 @@
+/*
+ * ESP32S2 ROM address table
+ * Generated for ROM with MD5sum: f054d40c5f6b9207d3827460a6f5748c
+*/
+PROVIDE ( ets_update_cpu_frequency = 0x4000d954 );
+
+/* ToDo: Following address may need modification */
+PROVIDE ( MD5Final = 0x400056e8 );
+PROVIDE ( MD5Init = 0x40005648 );
+PROVIDE ( MD5Update = 0x40005668 );
+/* bootloader will use following functions from xtensa hal library */
+xthal_get_ccount = 0x40015cbc;
+xthal_get_ccompare = 0x40015ce8;
+xthal_set_ccompare = 0x40015cc4;

components/bootloader_support/CMakeLists.txt

@@ -1,27 +1,104 @@
-set(COMPONENT_SRCS "src/bootloader_clock.c"
-                   "src/bootloader_common.c"
-                   "src/bootloader_flash.c"
-                   "src/bootloader_random.c"
-                   "src/bootloader_sha.c"
-                   "src/bootloader_utility.c"
-                   "src/efuse.c"
-                   "src/esp_image_format.c"
-                   "src/flash_encrypt.c"
-                   "src/flash_partitions.c"
-                   "src/flash_qio_mode.c"
-                   "src/secure_boot.c"
-                   "src/secure_boot_signatures.c")
+set(srcs
+    "src/bootloader_clock.c"
+    "src/bootloader_common.c"
+    "src/bootloader_flash.c"
+    "src/bootloader_random.c"
+    "src/bootloader_utility.c"
+    "src/esp_image_format.c"
+    "src/flash_partitions.c"
+    "src/flash_qio_mode.c"
+    "src/bootloader_flash_config_${IDF_TARGET}.c"
+    "src/bootloader_efuse_${IDF_TARGET}.c"
+    )
 
-if(${BOOTLOADER_BUILD})
-    set(COMPONENT_ADD_INCLUDEDIRS "include include_bootloader")
-    set(COMPONENT_REQUIRES)
-    set(COMPONENT_PRIV_REQUIRES spi_flash micro-ecc)
-    list(APPEND COMPONENT_SRCS "src/bootloader_init.c")
-else()
-    set(COMPONENT_ADD_INCLUDEDIRS "include")
-    set(COMPONENT_PRIV_INCLUDEDIRS "include_bootloader")
-    set(COMPONENT_REQUIRES)
-    set(COMPONENT_PRIV_REQUIRES spi_flash mbedtls micro-ecc)
+if(IDF_TARGET STREQUAL "esp32")
+    # Not supported on ESP32S2Beta yet
+    list(APPEND srcs "src/flash_encrypt.c")
 endif()
 
-register_component()
+if(BOOTLOADER_BUILD)
+    set(include_dirs "include" "include_bootloader")
+    set(priv_requires micro-ecc spi_flash efuse)
+    list(APPEND srcs
+        "src/bootloader_init.c"
+        "src/${IDF_TARGET}/bootloader_sha.c"
+        "src/${IDF_TARGET}/flash_encrypt.c"
+        "src/${IDF_TARGET}/secure_boot_signatures.c"
+        "src/${IDF_TARGET}/secure_boot.c"
+        "src/${IDF_TARGET}/bootloader_${IDF_TARGET}.c"
+        )
+else()
+    list(APPEND srcs
+        "src/idf/bootloader_sha.c"
+        "src/idf/secure_boot_signatures.c")
+    set(include_dirs "include")
+    set(priv_include_dirs "include_bootloader")
+    set(priv_requires spi_flash mbedtls efuse)
+endif()
+
+set(requires soc) #unfortunately the header directly uses SOC registers
+
+idf_component_register(SRCS "${srcs}"
+                    INCLUDE_DIRS "${include_dirs}"
+                    PRIV_INCLUDE_DIRS "${priv_include_dirs}"
+                    REQUIRES "${requires}"
+                    PRIV_REQUIRES "${priv_requires}")
+
+if(CONFIG_SECURE_SIGNED_APPS)
+    if(BOOTLOADER_BUILD)
+        # Whether CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES or not, we need verification key to embed
+        # in the library.
+        if(CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES)
+            # We generate the key from the signing key. The signing key is passed from the main project.
+            get_filename_component(secure_boot_signing_key
+                "${SECURE_BOOT_SIGNING_KEY}"
+                ABSOLUTE BASE_DIR "${project_dir}")
+            get_filename_component(secure_boot_verification_key
+                "signature_verification_key.bin"
+                ABSOLUTE BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}")
+            add_custom_command(OUTPUT "${secure_boot_verification_key}"
+                COMMAND ${ESPSECUREPY}
+                extract_public_key --keyfile "${secure_boot_signing_key}"
+                "${secure_boot_verification_key}"
+                DEPENDS ${secure_boot_signing_key}
+                VERBATIM)
+        else()
+            # We expect to 'inherit' the verification key passed from main project.
+            get_filename_component(secure_boot_verification_key
+                ${SECURE_BOOT_VERIFICATION_KEY}
+                ABSOLUTE BASE_DIR "${project_dir}")
+        endif()
+    else()  # normal app build
+        idf_build_get_property(project_dir PROJECT_DIR)
+
+        if(CONFIG_SECURE_BOOT_VERIFICATION_KEY)
+            # verification-only build supplies verification key
+            set(secure_boot_verification_key ${CONFIG_SECURE_BOOT_VERIFICATION_KEY})
+            get_filename_component(secure_boot_verification_key
+                ${secure_boot_verification_key}
+                ABSOLUTE BASE_DIR "${project_dir}")
+        else()
+            # sign at build time, extracts key from signing key
+            set(secure_boot_verification_key "${CMAKE_BINARY_DIR}/signature_verification_key.bin")
+            get_filename_component(secure_boot_signing_key
+                ${CONFIG_SECURE_BOOT_SIGNING_KEY}
+                ABSOLUTE BASE_DIR "${project_dir}")
+
+            add_custom_command(OUTPUT "${secure_boot_verification_key}"
+                COMMAND ${ESPSECUREPY}
+                extract_public_key --keyfile "${secure_boot_signing_key}"
+                "${secure_boot_verification_key}"
+                WORKING_DIRECTORY ${project_dir}
+                DEPENDS ${secure_boot_signing_key}
+                VERBATIM)
+        endif()
+    endif()
+
+    # Embed the verification key in the binary (app & bootloader)
+    #
+    target_add_binary_data(${COMPONENT_LIB} "${secure_boot_verification_key}" "BINARY"
+        RENAME_TO signature_verification_key_bin)
+    set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES
+        "${secure_boot_verification_key}")
+endif()

components/bootloader_support/component.mk

@@ -9,10 +9,19 @@ endif
 
 COMPONENT_SRCDIRS := src
 
+ifndef IS_BOOTLOADER_BUILD
+COMPONENT_SRCDIRS += src/idf  # idf sub-directory contains platform agnostic IDF versions
+else
+COMPONENT_SRCDIRS += src/$(IDF_TARGET)  # one sub-dir per chip
+endif
+
 ifndef IS_BOOTLOADER_BUILD
 COMPONENT_OBJEXCLUDE := src/bootloader_init.o
 endif
 
+COMPONENT_OBJEXCLUDE += src/bootloader_flash_config_esp32s2beta.o \
+			src/bootloader_efuse_esp32s2beta.o
+
 #
 # Secure boot signing key support
 #
@@ -40,10 +49,10 @@ $(ORIG_SECURE_BOOT_VERIFICATION_KEY):
 $(SECURE_BOOT_VERIFICATION_KEY): $(ORIG_SECURE_BOOT_VERIFICATION_KEY) $(SDKCONFIG_MAKEFILE)
 	$(summary) CP $< $@
 	cp $< $@
-endif
+endif #CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
 
 COMPONENT_EXTRA_CLEAN += $(SECURE_BOOT_VERIFICATION_KEY)
 
 COMPONENT_EMBED_FILES := $(SECURE_BOOT_VERIFICATION_KEY)
 
-endif
+endif #CONFIG_SECURE_SIGNED_APPS

components/bootloader_support/include/bootloader_clock.h

@@ -14,8 +14,21 @@
 
 #pragma once
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /** @brief Configure clocks for early boot
  *
  * Called by bootloader, or by the app if the bootloader version is old (pre v2.1).
  */
 void bootloader_clock_configure(void);
+
+/** @brief Return the rated maximum frequency of this chip
+ */
+int bootloader_clock_get_rated_freq_mhz(void);
+
+#ifdef __cplusplus
+}
+#endif
+

components/bootloader_support/include/bootloader_common.h

@@ -13,7 +13,19 @@
 // limitations under the License.
 
 #pragma once
-#include "esp_flash_data_types.h"
+#include "esp_flash_partitions.h"
+#include "esp_image_format.h"
+#include "esp_app_format.h"
+// RESET_REASON is declared in rom/rtc.h
+#if CONFIG_IDF_TARGET_ESP32
+#include "esp32/rom/rtc.h"
+#elif CONFIG_IDF_TARGET_ESP32S2BETA
+#include "esp32s2beta/rom/rtc.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 /// Type of hold a GPIO in low state
 typedef enum {
@@ -22,22 +34,35 @@ typedef enum {
     GPIO_NOT_HOLD   = 0     /*!< If the GPIO input is not low */
 } esp_comm_gpio_hold_t;
 
+typedef enum {
+    ESP_IMAGE_BOOTLOADER,
+    ESP_IMAGE_APPLICATION
+} esp_image_type;
+
 /**
- * @brief Calculate crc for the OTA data partition.
+ * @brief Calculate crc for the OTA data select.
  *
- * @param[in] ota_data The OTA data partition.
+ * @param[in] s The OTA data select.
  * @return    Returns crc value.
  */
 uint32_t bootloader_common_ota_select_crc(const esp_ota_select_entry_t *s);
 
 /**
- * @brief Verifies the validity of the OTA data partition
+ * @brief Verifies the validity of the OTA data select
  *
- * @param[in] ota_data The OTA data partition.
+ * @param[in] s The OTA data select.
  * @return    Returns true on valid, false otherwise.
  */
 bool bootloader_common_ota_select_valid(const esp_ota_select_entry_t *s);
 
+/**
+ * @brief Returns true if OTADATA is not marked as bootable partition.
+ *
+ * @param[in] s The OTA data select.
+ * @return    Returns true if OTADATA invalid, false otherwise.
+ */
+bool bootloader_common_ota_select_invalid(const esp_ota_select_entry_t *s);
+
 /**
  * @brief Check if the GPIO input is a long hold or a short hold.
  *
@@ -69,6 +94,13 @@ bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_dat
  */
 bool bootloader_common_label_search(const char *list, char *label);
 
+/**
+ * @brief Configure default SPI pin modes and drive strengths
+ *
+ * @param drv GPIO drive level (determined by clock frequency)
+ */
+void bootloader_configure_spi_pins(int drv);
+
 /**
  * @brief Calculates a sha-256 for a given partition or returns a appended digest.
  *
@@ -91,3 +123,136 @@ bool bootloader_common_label_search(const char *list, char *label);
  *          - ESP_FAIL: An allocation error occurred.
  */
 esp_err_t bootloader_common_get_sha256_of_partition(uint32_t address, uint32_t size, int type, uint8_t *out_sha_256);
+
+/**
+ * @brief Returns the number of active otadata.
+ *
+ * @param[in] two_otadata Pointer on array from two otadata structures.
+ *
+ * @return The number of active otadata (0 or 1).
+ *        - -1: If it does not have active otadata.
+ */
+int bootloader_common_get_active_otadata(esp_ota_select_entry_t *two_otadata);
+
+/**
+ * @brief Returns the number of active otadata.
+ *
+ * @param[in] two_otadata       Pointer on array from two otadata structures.
+ * @param[in] valid_two_otadata Pointer on array from two bools. True means select.
+ * @param[in] max               True - will select the maximum ota_seq number, otherwise the minimum.
+ *
+ * @return The number of active otadata (0 or 1).
+ *        - -1: If it does not have active otadata.
+ */
+int bootloader_common_select_otadata(const esp_ota_select_entry_t *two_otadata, bool *valid_two_otadata, bool max);
+
+/**
+ * @brief Returns esp_app_desc structure for app partition. This structure includes app version.
+ *
+ * Returns a description for the requested app partition.
+ * @param[in] partition      App partition description.
+ * @param[out] app_desc      Structure of info about app.
+ * @return
+ *  - ESP_OK:                Successful.
+ *  - ESP_ERR_INVALID_ARG:   The arguments passed are not valid.
+ *  - ESP_ERR_NOT_FOUND:     app_desc structure is not found. Magic word is incorrect.
+ *  - ESP_FAIL:              mapping is fail.
+ */
+esp_err_t bootloader_common_get_partition_description(const esp_partition_pos_t *partition, esp_app_desc_t *app_desc);
+
+/**
+ * @brief Get chip revision
+ *
+ * @return Chip revision number
+ */
+uint8_t bootloader_common_get_chip_revision(void);
+
+/**
+ * @brief Query reset reason
+ *
+ * @param cpu_no CPU number
+ * @return reset reason enumeration
+ */
+RESET_REASON bootloader_common_get_reset_reason(int cpu_no);
+
+/**
+ * @brief Check if the image (bootloader and application) has valid chip ID and revision
+ *
+ * @param[in] img_hdr: image header
+ * @param[in] type: image type, bootloader or application
+ * @return
+ *      - ESP_OK: image and chip are matched well
+ *      - ESP_FAIL: image doesn't match to the chip
+ */
+esp_err_t bootloader_common_check_chip_validity(const esp_image_header_t* img_hdr, esp_image_type type);
+
+/**
+ * @brief Configure VDDSDIO, call this API to rise VDDSDIO to 1.9V when VDDSDIO regulator is enabled as 1.8V mode.
+ */
+void bootloader_common_vddsdio_configure(void);
+
+#if defined( CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP ) || defined( CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC )
+/**
+ * @brief Returns partition from rtc_retain_mem
+ *
+ * Uses to get the partition of application which was worked before to go to the deep sleep.
+ * This partition was stored in rtc_retain_mem.
+ * Note: This function operates the RTC FAST memory which available only for PRO_CPU.
+ *       Make sure that this function is used only PRO_CPU.
+ *
+ * @return partition: If rtc_retain_mem is valid.
+ *        - NULL: If it is not valid.
+ */
+esp_partition_pos_t* bootloader_common_get_rtc_retain_mem_partition(void);
+
+/**
+ * @brief Update the partition and reboot_counter in rtc_retain_mem.
+ *
+ * This function saves the partition of application for fast booting from the deep sleep.
+ * An algorithm uses this partition to avoid reading the otadata and does not validate an image.
+ * Note: This function operates the RTC FAST memory which available only for PRO_CPU.
+ *       Make sure that this function is used only PRO_CPU.
+ *
+ * @param[in] partition      App partition description. Can be NULL, in this case rtc_retain_mem.partition is not updated.
+ * @param[in] reboot_counter If true then update reboot_counter.
+ *
+ */
+void bootloader_common_update_rtc_retain_mem(esp_partition_pos_t* partition, bool reboot_counter);
+
+/**
+ * @brief Reset entire rtc_retain_mem.
+ *
+ * Note: This function operates the RTC FAST memory which available only for PRO_CPU.
+ *       Make sure that this function is used only PRO_CPU.
+ */
+void bootloader_common_reset_rtc_retain_mem(void);
+
+/**
+ * @brief Returns reboot_counter from rtc_retain_mem
+ *
+ * The reboot_counter counts the number of reboots. Reset only when power is off.
+ * The very first launch of the application will be from 1.
+ * Overflow is not possible, it will stop at the value UINT16_MAX.
+ * Note: This function operates the RTC FAST memory which available only for PRO_CPU.
+ *       Make sure that this function is used only PRO_CPU.
+ *
+ * @return reboot_counter: 1..65535
+ *         - 0: If rtc_retain_mem is not valid.
+ */
+uint16_t bootloader_common_get_rtc_retain_mem_reboot_counter(void);
+
+/**
+ * @brief Returns rtc_retain_mem
+ *
+ * Note: This function operates the RTC FAST memory which available only for PRO_CPU.
+ *       Make sure that this function is used only PRO_CPU.
+ *
+ * @return rtc_retain_mem
+ */
+rtc_retain_mem_t* bootloader_common_get_rtc_retain_mem(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif