set_server_config() set ssl authmode to OPTIONAL

Previously security eFuses were only burnt if the flash was not encrypted
yet.
To enhance robustness of the security eFuse settings their correct setup
should be verified on each bootup. Else it would be possible for an
already encrypted ESP to be reflashed with firmware containing updated,
more restrictive eFuse settings without them ever being applied.
Additionally this change enables easy, secure use of ESPs with host sidee
flash preencryption. Flash preencryption by the host computer performing
the programming procedure can speed up the programming process by a great
deal since the flash no longer needs to be read, erased and written again
by the bootloader self-encryption routines. Additionally it avoids
bricking of ESPs through interruption of the self-ecnryption procedure.
Without this change the host would have to set up all fuses in the ESP
correctly by itself, duplicating the fuse configuration code already
present in the bootloader and creating additional maintenance burden for
the host software if anything about the fuse setup logic changes.
This commit changes the security eFuse configuration logic to always burn
any configured security eFuses on bootup, regardless of current flash
encryption status.

.codespellrc

@@ -1,4 +1,4 @@
 [codespell]
-skip = build,*.yuv,components/fatfs/src/*,alice.txt,*.rgb,components/wpa_supplicant/*,components/esp_wifi/*,*.pem
-ignore-words-list = ser,dout,rsource,fram,inout,shs,ans,aci,unstall,unstalling,hart,wheight,wel,ot,fane,assertIn,registr,oen,parms
+skip = build,*.yuv,components/fatfs/src/*,alice.txt,*.rgb,components/wpa_supplicant/*,components/esp_wifi/*
+ignore-words-list = ser,dout,rsource,fram,inout,shs,ans,aci,unstall,unstalling,hart
 write-changes = true

.github/workflows/pre_commit_check.yml

@@ -40,5 +40,3 @@ jobs:
             echo ""
             exit 1
           fi
-          # Run pre-commit for PowerShell scripts check
-          pre-commit run --hook-stage manual check-powershell-scripts --from-ref base_ref --to-ref pr_ref --show-diff-on-failure

.gitignore

@@ -96,13 +96,10 @@ dependencies.lock
 managed_components
 
 # pytest log
-pytest-embedded/
-# legacy one
 pytest_embedded_log/
 list_job*.txt
 size_info*.txt
 XUNIT_RESULT*.xml
-.manifest_sha
 
 # clang config (for LSP)
 .clangd

.gitlab-ci.yml

@@ -30,6 +30,4 @@ include:
   - '.gitlab/ci/integration_test.yml'
   - '.gitlab/ci/host-test.yml'
   - '.gitlab/ci/deploy.yml'
-  - '.gitlab/ci/post_deploy.yml'
-  - '.gitlab/ci/retry_failed_jobs.yml'
   - '.gitlab/ci/test-win.yml'

.gitlab/CODEOWNERS

@@ -2,5 +2,232 @@
 #
 #    https://docs.gitlab.com/ee/user/project/code_owners.html#the-syntax-of-code-owners-files
 #
+# If more than one rule matches a given file, the latest rule is used.
+# The file should be generally kept sorted, except when it is necessary
+# to use a different order due to the fact above. In that case, use
+# '# sort-order-reset' comment line to reset the sort order.
+#
+# Recipes for a few common cases:
+#
+# 1. Specific directory with all its contents:
+#
+#    /components/app_trace/
+#
+#    Note the trailing slash!
+#
+# 2. File with certain extension in any subdirectory of a certain directory:
+#
+#    /examples/**/*.py
+#
+#    This includes an *.py files in /examples/ directory as well.
+#
+# 3. Contents of a directory with a certain name, anywhere in the tree:
+#
+#    test_*_host/
+#
+#    Will match everything under components/efuse/test_efuse_host/,
+#    components/heap/test_multi_heap_host/, components/lwip/test_afl_host/, etc.
+#
+# 4. Same as above, except limited to a specific place in the tree:
+#
+#    /components/esp32*/
+#
+#    Matches everything under /components/esp32, /components/esp32s2, etc.
+#    Doesn't match /tools/some-test/components/esp32s5.
+#
+# 5. Specific file:
+#
+#    /tools/tools.json
+#
+# 6. File with a certain name anywhere in the tree
+#
+#    .gitignore
+#
 
-* @esp-idf-codeowners/all-maintainers
+* @esp-idf-codeowners/other
+
+/.*                                   @esp-idf-codeowners/tools
+/.codespellrc                         @esp-idf-codeowners/ci
+/.github/workflows/                   @esp-idf-codeowners/ci
+/.gitlab-ci.yml                       @esp-idf-codeowners/ci
+/.gitlab/ci/                          @esp-idf-codeowners/ci
+/.pre-commit-config.yaml              @esp-idf-codeowners/ci
+/.readthedocs.yml                     @esp-idf-codeowners/docs
+/.vale.ini                            @esp-idf-codeowners/docs
+/CMakeLists.txt                       @esp-idf-codeowners/build-config
+/COMPATIBILITY*.md                    @esp-idf-codeowners/peripherals
+/CONTRIBUTING.md                      @esp-idf-codeowners/docs
+/Kconfig                              @esp-idf-codeowners/build-config
+/README*.md                           @esp-idf-codeowners/docs
+/SUPPORT_POLICY*.md                   @esp-idf-codeowners/docs
+/add_path.sh                          @esp-idf-codeowners/tools
+/conftest.py                          @esp-idf-codeowners/ci
+/export.*                             @esp-idf-codeowners/tools
+/install.*                            @esp-idf-codeowners/tools
+/pytest.ini                           @esp-idf-codeowners/ci
+/sdkconfig.rename                     @esp-idf-codeowners/build-config
+/sonar-project.properties             @esp-idf-codeowners/ci
+
+# sort-order-reset
+
+/components/app_trace/                @esp-idf-codeowners/debugging
+/components/app_update/               @esp-idf-codeowners/system @esp-idf-codeowners/app-utilities
+/components/bootloader*/              @esp-idf-codeowners/system @esp-idf-codeowners/security
+/components/bootloader_support/bootloader_flash/    @esp-idf-codeowners/peripherals
+/components/bt/                       @esp-idf-codeowners/bluetooth
+/components/cmock/                    @esp-idf-codeowners/system
+/components/console/                  @esp-idf-codeowners/system @esp-idf-codeowners/app-utilities/console
+/components/cxx/                      @esp-idf-codeowners/system
+/components/driver/                   @esp-idf-codeowners/peripherals
+/components/efuse/                    @esp-idf-codeowners/system
+/components/esp_adc/                  @esp-idf-codeowners/peripherals
+/components/esp_app_format/           @esp-idf-codeowners/system @esp-idf-codeowners/app-utilities
+/components/esp_bootloader_format/    @esp-idf-codeowners/system @esp-idf-codeowners/app-utilities
+/components/esp_coex/                 @esp-idf-codeowners/wifi @esp-idf-codeowners/bluetooth @esp-idf-codeowners/ieee802154
+/components/esp_common/               @esp-idf-codeowners/system
+/components/esp_driver_*/             @esp-idf-codeowners/peripherals
+/components/esp_driver_sdmmc/         @esp-idf-codeowners/peripherals @esp-idf-codeowners/storage
+/components/esp_eth/                  @esp-idf-codeowners/network
+/components/esp_event/                @esp-idf-codeowners/system
+/components/esp_gdbstub/              @esp-idf-codeowners/debugging
+/components/esp_hid/                  @esp-idf-codeowners/bluetooth
+/components/esp_http_client/          @esp-idf-codeowners/app-utilities
+/components/esp_http_server/          @esp-idf-codeowners/app-utilities
+/components/esp_https_ota/            @esp-idf-codeowners/app-utilities
+/components/esp_https_server/         @esp-idf-codeowners/app-utilities
+/components/esp_hw_support/           @esp-idf-codeowners/system @esp-idf-codeowners/peripherals
+/components/esp_hw_support/lowpower/  @esp-idf-codeowners/power-management
+/components/esp_lcd/                  @esp-idf-codeowners/peripherals
+/components/esp_local_ctrl/           @esp-idf-codeowners/app-utilities
+/components/esp_mm/                   @esp-idf-codeowners/peripherals
+/components/esp_netif/                @esp-idf-codeowners/network
+/components/esp_netif_stack/          @esp-idf-codeowners/network
+/components/esp_partition/            @esp-idf-codeowners/storage
+/components/esp_phy/                  @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/ieee802154
+/components/esp_pm/                   @esp-idf-codeowners/power-management @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/system
+/components/esp_psram/                @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
+/components/esp_ringbuf/              @esp-idf-codeowners/system
+/components/esp_rom/                  @esp-idf-codeowners/system @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi
+/components/esp_system/               @esp-idf-codeowners/system
+/components/esp_timer/                @esp-idf-codeowners/system
+/components/esp-tls/                  @esp-idf-codeowners/app-utilities
+/components/esp_vfs_*/                @esp-idf-codeowners/storage
+/components/esp_vfs_console/          @esp-idf-codeowners/storage @esp-idf-codeowners/system
+/components/esp_wifi/                 @esp-idf-codeowners/wifi
+/components/espcoredump/              @esp-idf-codeowners/debugging
+/components/esptool_py/               @esp-idf-codeowners/tools
+/components/fatfs/                    @esp-idf-codeowners/storage
+/components/freertos/                 @esp-idf-codeowners/system
+/components/hal/                      @esp-idf-codeowners/peripherals
+/components/heap/                     @esp-idf-codeowners/system
+/components/http_parser/              @esp-idf-codeowners/app-utilities
+/components/idf_test/                 @esp-idf-codeowners/ci
+/components/ieee802154/               @esp-idf-codeowners/ieee802154
+/components/json/                     @esp-idf-codeowners/app-utilities
+/components/linux/                    @esp-idf-codeowners/system
+/components/log/                      @esp-idf-codeowners/system
+/components/lwip/                     @esp-idf-codeowners/lwip
+/components/mbedtls/                  @esp-idf-codeowners/app-utilities/mbedtls @esp-idf-codeowners/security
+/components/mqtt/                     @esp-idf-codeowners/network
+/components/newlib/                   @esp-idf-codeowners/system @esp-idf-codeowners/toolchain
+/components/nvs_flash/                @esp-idf-codeowners/storage
+/components/nvs_sec_provider/         @esp-idf-codeowners/storage @esp-idf-codeowners/security
+/components/openthread/               @esp-idf-codeowners/ieee802154
+/components/partition_table/          @esp-idf-codeowners/system
+/components/perfmon/                  @esp-idf-codeowners/debugging
+/components/protobuf-c/               @esp-idf-codeowners/app-utilities
+/components/protocomm/                @esp-idf-codeowners/app-utilities/provisioning
+/components/pthread/                  @esp-idf-codeowners/system
+/components/riscv/                    @esp-idf-codeowners/system
+/components/sdmmc/                    @esp-idf-codeowners/storage
+/components/soc/                      @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
+/components/spi_flash/                @esp-idf-codeowners/peripherals
+/components/spiffs/                   @esp-idf-codeowners/storage
+/components/tcp_transport/            @esp-idf-codeowners/network
+/components/touch_element/            @esp-idf-codeowners/peripherals
+/components/ulp/                      @esp-idf-codeowners/system
+/components/unity/                    @esp-idf-codeowners/ci
+/components/usb/                      @esp-idf-codeowners/peripherals/usb
+/components/vfs/                      @esp-idf-codeowners/storage
+/components/wear_levelling/           @esp-idf-codeowners/storage
+/components/wifi_provisioning/        @esp-idf-codeowners/app-utilities/provisioning
+/components/wpa_supplicant/           @esp-idf-codeowners/wifi @esp-idf-codeowners/app-utilities/mbedtls
+/components/xtensa/                   @esp-idf-codeowners/system
+
+/docs/                                   @esp-idf-codeowners/docs
+/docs/**/api-guides/tools/               @esp-idf-codeowners/tools
+/docs/en/api-guides/jtag-debugging/      @esp-idf-codeowners/debugging
+/docs/**/api-reference/bluetooth/        @esp-idf-codeowners/bluetooth
+/docs/**/api-reference/network/          @esp-idf-codeowners/network @esp-idf-codeowners/wifi
+/docs/**/api-reference/peripherals/      @esp-idf-codeowners/peripherals
+/docs/**/api-reference/peripherals/usb*  @esp-idf-codeowners/peripherals @esp-idf-codeowners/peripherals/usb
+/docs/**/api-reference/protocols/        @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
+/docs/**/api-reference/provisioning/     @esp-idf-codeowners/app-utilities/provisioning
+/docs/**/api-reference/storage/          @esp-idf-codeowners/storage
+/docs/**/api-reference/system/           @esp-idf-codeowners/system
+/docs/**/security/                       @esp-idf-codeowners/security
+/docs/**/migration-guides/               @esp-idf-codeowners/docs @esp-idf-codeowners/all-maintainers
+
+/examples/README.md           @esp-idf-codeowners/docs @esp-idf-codeowners/ci
+/examples/**/*.py             @esp-idf-codeowners/ci @esp-idf-codeowners/tools
+/examples/bluetooth/          @esp-idf-codeowners/bluetooth
+/examples/build_system/       @esp-idf-codeowners/build-config
+/examples/common_components/  @esp-idf-codeowners/system @esp-idf-codeowners/wifi @esp-idf-codeowners/lwip @esp-idf-codeowners/network
+/examples/custom_bootloader/  @esp-idf-codeowners/system
+/examples/cxx/                @esp-idf-codeowners/system
+/examples/ethernet/           @esp-idf-codeowners/network
+/examples/get-started/        @esp-idf-codeowners/system
+/examples/ieee802154/         @esp-idf-codeowners/ieee802154
+/examples/mesh/               @esp-idf-codeowners/wifi
+/examples/network/            @esp-idf-codeowners/network @esp-idf-codeowners/wifi
+/examples/openthread/         @esp-idf-codeowners/ieee802154
+/examples/peripherals/        @esp-idf-codeowners/peripherals
+/examples/peripherals/usb/    @esp-idf-codeowners/peripherals @esp-idf-codeowners/peripherals/usb
+/examples/phy/                @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/ieee802154
+/examples/protocols/          @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
+/examples/provisioning/       @esp-idf-codeowners/app-utilities/provisioning
+/examples/security/           @esp-idf-codeowners/security
+/examples/storage/            @esp-idf-codeowners/storage
+/examples/system/             @esp-idf-codeowners/system
+/examples/system/ota/         @esp-idf-codeowners/app-utilities
+/examples/wifi/               @esp-idf-codeowners/wifi
+/examples/zigbee/             @esp-idf-codeowners/ieee802154
+
+/tools/                       @esp-idf-codeowners/tools
+/tools/ble/                   @esp-idf-codeowners/app-utilities
+/tools/catch/                 @esp-idf-codeowners/ci
+/tools/ci/                    @esp-idf-codeowners/ci
+/tools/cmake/                 @esp-idf-codeowners/build-config
+/tools/cmake/toolchain-*.cmake      @esp-idf-codeowners/toolchain
+/tools/esp_app_trace/         @esp-idf-codeowners/debugging
+/tools/esp_prov/              @esp-idf-codeowners/app-utilities
+/tools/gdb_panic_server.py    @esp-idf-codeowners/debugging
+/tools/kconfig*/              @esp-idf-codeowners/build-config
+/tools/ldgen/                 @esp-idf-codeowners/build-config
+/tools/mass_mfg/              @esp-idf-codeowners/app-utilities
+/tools/mocks/                 @esp-idf-codeowners/system
+/tools/test_apps/README.md    @esp-idf-codeowners/docs @esp-idf-codeowners/ci
+
+## Note: owners here should be the same as the owners for the same example subdir, above
+/tools/test_apps/build_system/       @esp-idf-codeowners/build-config
+/tools/test_apps/linux_compatible/   @esp-idf-codeowners/system
+/tools/test_apps/protocols/          @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
+/tools/test_apps/security/           @esp-idf-codeowners/security
+/tools/test_apps/system/             @esp-idf-codeowners/system
+
+/tools/test_apps/**/*.py             @esp-idf-codeowners/ci @esp-idf-codeowners/tools
+
+/tools/test_build_system/     @esp-idf-codeowners/tools @esp-idf-codeowners/build-config
+
+/tools/tools.json             @esp-idf-codeowners/tools @esp-idf-codeowners/toolchain @esp-idf-codeowners/debugging
+
+/tools/unit-test-app/         @esp-idf-codeowners/system @esp-idf-codeowners/tools
+
+# sort-order-reset
+
+/components/**/test_apps/**/*.py     @esp-idf-codeowners/ci @esp-idf-codeowners/tools
+
+# ignore lists
+/tools/ci/check_copyright_config.yaml                   @esp-idf-codeowners/all-maintainers
+/tools/ci/check_copyright_ignore.txt                    @esp-idf-codeowners/all-maintainers
+/tools/ci/mypy_ignore_list.txt                          @esp-idf-codeowners/tools

.gitlab/ci/build.yml

@@ -1,7 +1,7 @@
 .build_template:
   stage: build
   extends:
-    - .after_script:build:ccache-show-stats:upload-failed-job-logs
+    - .after_script:build:ccache:upload-when-fail
   image: $ESP_ENV_IMAGE
   tags:
     - build
@@ -12,11 +12,11 @@
     IDF_CCACHE_ENABLE: "1"
   dependencies: []
 
-.build_cmake_clang_template:
+.build_cmake_template:
   extends:
     - .build_template
     - .before_script:build
-    - .after_script:build:ccache-show-stats
+    - .after_script:build:ccache
   dependencies: # set dependencies to null to avoid missing artifacts issue
   needs:
     - job: fast_template_app
@@ -34,11 +34,29 @@
       - "**/build*/size.json"
     expire_in: 1 week
     when: always
+  script:
+    # CI specific options start from "--parallel-count xxx". could ignore when running locally
+    - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
+      -t $IDF_TARGET
+      --copy-sdkconfig
+      --parallel-count ${CI_NODE_TOTAL:-1}
+      --parallel-index ${CI_NODE_INDEX:-1}
+      --extra-preserve-dirs
+        examples/bluetooth/esp_ble_mesh/ble_mesh_console
+        examples/bluetooth/hci/controller_hci_uart_esp32
+        examples/wifi/iperf
+      --modified-components ${MR_MODIFIED_COMPONENTS}
+      --modified-files ${MR_MODIFIED_FILES}
+    # for detailed documents, please refer to .gitlab/ci/README.md#uploaddownload-artifacts-to-internal-minio-server
+    - python tools/ci/artifacts_handler.py upload
+
+.build_cmake_clang_template:
+  extends:
+    - .build_cmake_template
   variables:
     IDF_TOOLCHAIN: clang
     TEST_BUILD_OPTS_EXTRA: ""
-    TEST_DIR: tools/test_apps/system/clang_build_test
-    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
+    TEST_DIR: tools/test_apps/system/cxx_pthread_bluetooth
   script:
     # CI specific options start from "--parallel-count xxx". could ignore when running locally
     - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
@@ -94,22 +112,6 @@ fast_template_app:
     BUILD_COMMAND_ARGS: "-p"
 #------------------------------------------------------------------------------
 
-#######################
-# gnu_static_analyzer #
-#######################
-gcc_static_analyzer:
-  extends:
-    - .build_template_app_template
-    - .rules:build:target_test
-  stage: pre_check
-  tags: [build, shiny]
-  variables:
-    CI_CCACHE_DISABLE: 1
-    ANALYZING_APP: "examples/get-started/hello_world"
-  script:
-    - echo "CONFIG_COMPILER_STATIC_ANALYZER=y" >> ${ANALYZING_APP}/sdkconfig.defaults
-    - python -m idf_build_apps build -v -p ${ANALYZING_APP} -t all
-
 ########################################
 # Clang Build Apps Without Tests Cases #
 ########################################
@@ -138,12 +140,11 @@ build_clang_test_apps_esp32s3:
   extends:
     - .build_cmake_clang_template
   variables:
-    # https://reviews.llvm.org/D90108.
-    # GNU 'as' lets .weak override .globl since binutils-gdb
-    # https://github.com/bminor/binutils-gdb/commit/5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996)
-    # while MC lets the last directive win (PR38921).
-    # For RISCV chips we use integrated assembler by default, so suppress this warning to pass CI pipeline.
-    TEST_BUILD_OPTS_EXTRA: "--ignore-warning-str 'changed binding to STB_WEAK'"
+    # For RISCV clang generates '.linker-options' sections of type 'llvm_linker_options' in asm files.
+    # See (https://llvm.org/docs/Extensions.html#linker-options-section-linker-options).
+    # Binutils gas ignores them with warning.
+    # TODO: LLVM-112, Use integrated assembler.
+    TEST_BUILD_OPTS_EXTRA: "--ignore-warning-str 'Warning: unrecognized section type'"
 
 build_clang_test_apps_esp32c3:
   extends:
@@ -163,30 +164,11 @@ build_clang_test_apps_esp32c6:
   extends:
     - .build_clang_test_apps_riscv
     - .rules:build
+  # TODO: c6 builds fail in master due to missing headers
+  allow_failure: true
   variables:
     IDF_TARGET: esp32c6
 
-build_clang_test_apps_esp32c5:
-  extends:
-    - .build_clang_test_apps_riscv
-    - .rules:build
-  variables:
-    IDF_TARGET: esp32c5
-
-build_clang_test_apps_esp32h2:
-  extends:
-    - .build_clang_test_apps_riscv
-    - .rules:build
-  variables:
-    IDF_TARGET: esp32h2
-
-build_clang_test_apps_esp32p4:
-  extends:
-    - .build_clang_test_apps_riscv
-    - .rules:build
-  variables:
-    IDF_TARGET: esp32p4
-
 ######################
 # Build System Tests #
 ######################
@@ -212,12 +194,8 @@ build_clang_test_apps_esp32p4:
     - ${IDF_PATH}/tools/ci/test_configure_ci_environment.sh
     - cd ${IDF_PATH}/tools/test_build_system
     - python ${IDF_PATH}/tools/ci/get_known_failure_cases_file.py
-    - pytest
-      --cleanup-idf-copy
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --work-dir ${CI_PROJECT_DIR}/test_build_system
-      --junitxml ${CI_PROJECT_DIR}/XUNIT_RESULT.xml
+    - pytest --parallel-count ${CI_NODE_TOTAL:-1} --parallel-index ${CI_NODE_INDEX:-1}
+      --work-dir ${CI_PROJECT_DIR}/test_build_system --junitxml=${CI_PROJECT_DIR}/XUNIT_RESULT.xml
       --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
 
 pytest_build_system:
@@ -228,16 +206,12 @@ pytest_build_system_macos:
   extends:
     - .test_build_system_template
     - .before_script:build:macos
-    - .after_script:build:macos:upload-failed-job-logs:ccache-show-stats
     - .rules:build:macos
   tags:
     - macos_shell
   parallel: 3
-  variables:
-    PYENV_VERSION: "3.8"
-    # CCACHE_DIR: "/cache/idf_ccache". On macOS, you cannot write to this folder due to insufficient permissions.
-    CCACHE_DIR: "" # ccache will use "$HOME/Library/Caches/ccache".
-    CCACHE_MAXSIZE: "5G" # To preserve the limited Macbook storage. CCACHE automatically prunes old caches to fit the set limit.
+  allow_failure: true  # IDFCI-2107
+
 build_docker:
   extends:
     - .before_script:minimal
@@ -283,8 +257,7 @@ generate_build_child_pipeline:
   dependencies: # set dependencies to null to avoid missing artifacts issue
   needs:
     - pipeline_variables
-    - job: baseline_manifest_sha
-      optional: true
+    - check_test_cases_env_markers_and_required_runners
   artifacts:
     paths:
       - build_child_pipeline.yml
@@ -292,11 +265,7 @@ generate_build_child_pipeline:
       - non_test_related_apps.txt
     expire_in: 1 week
     when: always
-  variables:
-    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
   script:
-    # requires basic pytest dependencies
-    - run_cmd bash install.sh --enable-pytest
     - run_cmd python tools/ci/dynamic_pipelines/scripts/generate_build_child_pipeline.py
 
 build_child_pipeline:
@@ -313,7 +282,6 @@ build_child_pipeline:
     MR_MODIFIED_FILES: $MR_MODIFIED_FILES
     PARENT_PIPELINE_ID: $CI_PIPELINE_ID
     BUILD_AND_TEST_ALL_APPS: $BUILD_AND_TEST_ALL_APPS
-    REPORT_EXIT_CODE: $REPORT_EXIT_CODE
   # https://gitlab.com/gitlab-org/gitlab/-/issues/214340
   inherit:
     variables: false

.gitlab/ci/common.yml

@@ -6,13 +6,12 @@ stages:
   - pre_check
   - build
   - assign_test
-  - build_doc
   - target_test
   - host_test
+  - build_doc
   - test_deploy
   - deploy
   - post_deploy
-  - retry_failed_jobs
 
 variables:
 # System environment
@@ -40,7 +39,7 @@ variables:
   GIT_FETCH_EXTRA_FLAGS: "--no-recurse-submodules --prune --prune-tags"
   # we're using .cache folder for caches
   GIT_CLEAN_FLAGS: -ffdx -e .cache/
-  LATEST_GIT_TAG: v5.4.2
+  LATEST_GIT_TAG: v5.3-dev
 
   SUBMODULE_FETCH_TOOL: "tools/ci/ci_fetch_submodule.py"
   # by default we will fetch all submodules
@@ -53,14 +52,18 @@ variables:
   IDF_PATH: "$CI_PROJECT_DIR"
   V: "0"
   CHECKOUT_REF_SCRIPT: "$CI_PROJECT_DIR/tools/ci/checkout_project_ref.py"
+  PYTHON_VER: 3.8.17
 
   # Docker images
-  ESP_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-env-v5.4:2"
-  ESP_IDF_DOC_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-idf-doc-env-v5.4:2-1"
-  TARGET_TEST_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/target-test-env-v5.4:2"
+  ESP_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-env-v5.3:1"
+  ESP_IDF_DOC_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-idf-doc-env-v5.3:1-1"
+  TARGET_TEST_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/target-test-env-v5.3:1"
   SONARQUBE_SCANNER_IMAGE: "${CI_DOCKER_REGISTRY}/sonarqube-scanner:5"
   PRE_COMMIT_IMAGE: "${CI_DOCKER_REGISTRY}/esp-idf-pre-commit:1"
 
+  # target test repo parameters
+  TEST_ENV_CONFIG_REPO: "https://gitlab-ci-token:${BOT_TOKEN}@${CI_SERVER_HOST}:${CI_SERVER_PORT}/qa/ci-test-runner-configs.git"
+
   # cache python dependencies
   PIP_CACHE_DIR: "$CI_PROJECT_DIR/.cache/pip"
 
@@ -70,7 +73,7 @@ variables:
   CI_PYTHON_CONSTRAINT_BRANCH: ""
 
   # Update the filename for a specific ESP-IDF release. It is used only with CI_PYTHON_CONSTRAINT_BRANCH.
-  CI_PYTHON_CONSTRAINT_FILE: "espidf.constraints.v5.4.txt"
+  CI_PYTHON_CONSTRAINT_FILE: "espidf.constraints.v5.3.txt"
 
   # Set this variable to repository name of a Python tool you wish to install and test in the context of ESP-IDF CI.
   # Keep the variable empty when not used.
@@ -81,14 +84,8 @@ variables:
   # This is used only if CI_PYTHON_TOOL_REPO is not empty.
   CI_PYTHON_TOOL_BRANCH: ""
 
-  # Set this variable to Clang toolchain distro URL to be used.
-  # NOTE: We have separate toolchains for Xtensa and RISCV, therefore jobs for one arch will fail.
-  # This is OK as far as we use CI_CLANG_DISTRO_URL for pre-release tests purposes only.
-  # Keep the variable empty when not used.
-  CI_CLANG_DISTRO_URL: ""
-
   # Set this variable to specify the file name for the known failure cases.
-  KNOWN_FAILURE_CASES_FILE_NAME: "5.4.txt"
+  KNOWN_FAILURE_CASES_FILE_NAME: "master.txt"
 
   IDF_CI_BUILD: 1
 
@@ -100,8 +97,6 @@ variables:
   CCACHE_DIR: "/cache/idf_ccache"
   CCACHE_MAXSIZE: "50G"
 
-  FF_USE_NEW_BASH_EVAL_STRATEGY: "true"
-
 ################################################
 # `before_script` and `after_script` Templates #
 ################################################
@@ -141,48 +136,40 @@ variables:
     export IDF_MIRROR_PREFIX_MAP=
   fi
 
-  if [[ "${CI_JOB_STAGE}" != "target_test" ]]; then
-    section_start "running_install_sh" "Running install.sh"
-    if [[ "${CI_JOB_STAGE}" == "build_doc" ]]; then
-      run_cmd bash install.sh --enable-ci --enable-docs
-    elif [[ "${CI_JOB_STAGE}" == "build" ]]; then
+  # install latest python packages
+  # target test jobs
+  if [[ "${CI_JOB_STAGE}" == "target_test" ]]; then
+    run_cmd bash install.sh --enable-ci --enable-pytest
+  elif [[ "${CI_JOB_STAGE}" == "build_doc" ]]; then
+    run_cmd bash install.sh --enable-ci --enable-docs
+  elif [[ "${CI_JOB_STAGE}" == "build" ]]; then
+    run_cmd bash install.sh --enable-ci --enable-pytest
+  else
+    if ! echo "${CI_JOB_NAME}" | egrep ".*pytest.*"; then
       run_cmd bash install.sh --enable-ci
     else
-      if ! echo "${CI_JOB_NAME}" | egrep ".*pytest.*"; then
-        run_cmd bash install.sh --enable-ci
-      else
-        run_cmd bash install.sh --enable-ci --enable-pytest --enable-test-specific
-      fi
+      run_cmd bash install.sh --enable-ci --enable-pytest
     fi
-    section_end "running_install_sh"
-  else
-    section_start "install_python_env" "Install Python environment"
-    run_cmd python tools/idf_tools.py install-python-env --features ci,pytest,test-specific
-    section_end "install_python_env"
   fi
 
-  if [[ ! -z "$INSTALL_EXTRA_TOOLS" ]]; then
-    section_start "installing_optional_tools" "Install optional tools ${INSTALL_EXTRA_TOOLS}"
-    $IDF_PATH/tools/idf_tools.py --non-interactive install $INSTALL_EXTRA_TOOLS
-    section_end "installing_optional_tools"
-  fi
-
-  # Install esp-clang if necessary (esp-clang is separately installed)
-  if [[ "$IDF_TOOLCHAIN" == "clang" && -z "$CI_CLANG_DISTRO_URL" ]]; then
+  # Install esp-clang if necessary
+  if [[ "$IDF_TOOLCHAIN" == "clang" ]]; then
     $IDF_PATH/tools/idf_tools.py --non-interactive install esp-clang
   fi
 
-  if [[ "${CI_JOB_STAGE}" == "target_test" ]]; then
-    section_start "IDF_SKIP_TOOLS_CHECK" "Skip required tools check"
-    export IDF_SKIP_TOOLS_CHECK=1
-    section_end "IDF_SKIP_TOOLS_CHECK"
+  # Install QEMU if necessary
+  if [[ ! -z "$INSTALL_QEMU" ]]; then
+    $IDF_PATH/tools/idf_tools.py --non-interactive install qemu-xtensa qemu-riscv32
   fi
-  section_start "source_export" "Source export.sh"
-  source ./export.sh
-  section_end "source_export"
 
-  # Custom clang toolchain
-  if [[ "$IDF_TOOLCHAIN" == "clang" && ! -z "$CI_CLANG_DISTRO_URL" ]]; then
+  # Since the version 3.21 CMake passes source files and include dirs to ninja using absolute paths.
+  # Needed for pytest junit reports.
+  $IDF_PATH/tools/idf_tools.py --non-interactive install cmake
+
+  source ./export.sh
+
+  # Custom clang
+  if [[ ! -z "$CI_CLANG_DISTRO_URL" ]]; then
     echo "Using custom clang from ${CI_CLANG_DISTRO_URL}"
     wget $CI_CLANG_DISTRO_URL
     ARCH_NAME=$(basename $CI_CLANG_DISTRO_URL)
@@ -191,21 +178,13 @@ variables:
   fi
 
   # Custom OpenOCD
-  if [[ "$CI_JOB_STAGE" == "target_test" ]]; then
-    machine="$(uname -m)"
-    if [[ "$machine" == "armv7l" ]] ; then
-      OOCD_DISTRO_URL="$OOCD_DISTRO_URL_ARMHF"
-    elif [[ "$machine" == "aarch64" ]] ; then
-      OOCD_DISTRO_URL="$OOCD_DISTRO_URL_ARM64"
-    fi
-    if [[ ! -z "$OOCD_DISTRO_URL" ]]; then
-      echo "Using custom OpenOCD from ${OOCD_DISTRO_URL}"
-      wget $OOCD_DISTRO_URL
-      ARCH_NAME=$(basename $OOCD_DISTRO_URL)
-      tar -x -f $ARCH_NAME
-      export OPENOCD_SCRIPTS=$PWD/openocd-esp32/share/openocd/scripts
-      export PATH=$PWD/openocd-esp32/bin:$PATH
-    fi
+  if [[ ! -z "$OOCD_DISTRO_URL" && "$CI_JOB_STAGE" == "target_test" ]]; then
+    echo "Using custom OpenOCD from ${OOCD_DISTRO_URL}"
+    wget $OOCD_DISTRO_URL
+    ARCH_NAME=$(basename $OOCD_DISTRO_URL)
+    tar -x -f $ARCH_NAME
+    export OPENOCD_SCRIPTS=$PWD/openocd-esp32/share/openocd/scripts
+    export PATH=$PWD/openocd-esp32/bin:$PATH
   fi
 
   if [[ -n "$CI_PYTHON_TOOL_REPO" ]]; then
@@ -214,8 +193,6 @@ variables:
     rm -rf ${CI_PYTHON_TOOL_REPO}
   fi
 
-  info "setup tools and python venv done"
-
 .show_ccache_statistics: &show_ccache_statistics |
   # Show ccache statistics if enabled globally
   test "$CI_CCACHE_STATS" == 1 && test -n "$(which ccache)" && ccache --show-stats -vv || true
@@ -231,29 +208,13 @@ variables:
 
 .before_script:build:macos:
   before_script:
-    # macos is running shell executor, which means it would use
-    # the system installed /usr/local/bin/python3 by default.
-    # Ensure pyenv and PYENV_VERSION installed
-    - eval "$(pyenv init -)"
     - *common-before_scripts
     # On macOS, these tools need to be installed
     - export IDF_TOOLS_PATH="${HOME}/.espressif_runner_${CI_RUNNER_ID}_${CI_CONCURRENT_ID}"
-    # remove idf-env.json, since it may contains enabled "features"
-    - rm -f $IDF_TOOLS_PATH/idf-env.json
+    - $IDF_PATH/tools/idf_tools.py --non-interactive install cmake ninja
     # This adds tools (compilers) and the version-specific Python environment to PATH
     - *setup_tools_and_idf_python_venv
     - fetch_submodules
-  variables:
-    INSTALL_EXTRA_TOOLS: cmake ninja
-
-.after_script:build:macos:upload-failed-job-logs:ccache-show-stats:
-  after_script:
-    # macos is running shell executor, which means it would use
-    # the system installed /usr/local/bin/python3 by default.
-    # Ensure pyenv and PYENV_VERSION installed
-    - eval "$(pyenv init -)"
-    - *upload_failed_job_log_artifacts
-    - *show_ccache_statistics
 
 .before_script:build:
   before_script:
@@ -264,11 +225,11 @@ variables:
     - export EXTRA_CFLAGS=${PEDANTIC_CFLAGS}
     - export EXTRA_CXXFLAGS=${PEDANTIC_CXXFLAGS}
 
-.after_script:build:ccache-show-stats:
+.after_script:build:ccache:
   after_script:
     - *show_ccache_statistics
 
-.after_script:build:ccache-show-stats:upload-failed-job-logs:
+.after_script:build:ccache:upload-when-fail:
   after_script:
     - *show_ccache_statistics
     - *upload_failed_job_log_artifacts
@@ -307,8 +268,8 @@ variables:
     git remote add origin "${CI_REPOSITORY_URL}"
   fi
 
-.git_checkout_ci_commit_sha: &git_checkout_ci_commit_sha |
-  git checkout $CI_COMMIT_SHA
+.git_checkout_fetch_head: &git_checkout_fetch_head |
+  git checkout FETCH_HEAD
   git clean ${GIT_CLEAN_FLAGS}
 
 # git diff requires two commits, with different CI env var
@@ -332,7 +293,6 @@ variables:
         git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
         git fetch origin $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
         export GIT_DIFF_OUTPUT=$(git diff --name-only $CI_MERGE_REQUEST_DIFF_BASE_SHA $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA)
-        git fetch origin $CI_COMMIT_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
       # merge request pipelines, when the mr got conflicts
       elif [[ -n $CI_MERGE_REQUEST_DIFF_BASE_SHA ]]; then
         git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
@@ -348,7 +308,7 @@ variables:
         git fetch origin $CI_COMMIT_SHA --depth=2 ${GIT_FETCH_EXTRA_FLAGS}
         export GIT_DIFF_OUTPUT=$(git diff --name-only $CI_COMMIT_SHA~1 $CI_COMMIT_SHA)
       fi
-    - *git_checkout_ci_commit_sha
+    - *git_checkout_fetch_head
     - *common-before_scripts
     - *setup_tools_and_idf_python_venv
     - add_gitlab_ssh_keys
@@ -362,7 +322,7 @@ variables:
     - *git_init
     - *git_fetch_from_mirror_url_if_exists
     - git fetch origin "${CI_COMMIT_SHA}" --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
-    - *git_checkout_ci_commit_sha
+    - *git_checkout_fetch_head
     - *common-before_scripts
     - *setup_tools_and_idf_python_venv
     - add_gitlab_ssh_keys

.gitlab/ci/danger.yml

@@ -1,4 +1,4 @@
-# External DangerJS
+# Extenal DangerJS
 include:
   - project: espressif/shared-ci-dangerjs
     ref: master
@@ -10,6 +10,7 @@ run-danger-mr-linter:
     GIT_STRATEGY: none # no repo checkout
     ENABLE_CHECK_AREA_LABELS: 'true'
     ENABLE_CHECK_DOCS_TRANSLATION: 'true'
+    ENABLE_CHECK_RELEASE_NOTES_DESCRIPTION: 'true'
     ENABLE_CHECK_UPDATED_CHANGELOG: 'false'
   before_script: []
   cache: []

.gitlab/ci/default-build-test-rules.yml

@@ -7,12 +7,12 @@
 #
 # This file should ONLY be used during bringup. Should be reset to empty after the bringup process
 extra_default_build_targets:
-
+  - esp32p4
+  - esp32c5
 
 bypass_check_test_targets:
   - esp32c5
   - esp32c61
-
 #
 # These lines would
 # - enable the README.md check for esp32c6. Don't forget to add the build jobs in .gitlab/ci/build.yml

.gitlab/ci/docs.yml

@@ -37,16 +37,25 @@
 .if-dev-push: &if-dev-push
   if: '$CI_COMMIT_REF_NAME != "master" && $CI_COMMIT_BRANCH !~ /^release\/v/ && $CI_COMMIT_TAG !~ /^v\d+\.\d+(\.\d+)?($|-)/ && $CI_COMMIT_TAG !~ /^qa-test/ && ($CI_PIPELINE_SOURCE == "push" || $CI_PIPELINE_SOURCE == "merge_request_event")'
 
+.if-schedule: &if-schedule
+  if: '$CI_PIPELINE_SOURCE == "schedule"'
+
 .doc-rules:build:docs-full:
   rules:
     - <<: *if-qa-test-tag
       when: never
-    - <<: *if-protected
+    - <<: *if-schedule
     - <<: *if-label-build_docs
     - <<: *if-label-docs_full
     - <<: *if-dev-push
       changes: *patterns-docs-full
 
+.doc-rules:build:docs-full-prod:
+  rules:
+    - <<: *if-qa-test-tag
+      when: never
+    - <<: *if-protected-no_label
+
 .doc-rules:build:docs-partial:
   rules:
     - <<: *if-qa-test-tag
@@ -83,18 +92,17 @@ check_docs_lang_sync:
   stage: build_doc
   tags:
     - build_docs
-  needs:
-    - job: fast_template_app
-      artifacts: false
-      optional: true
   script:
     - if [ -n "${BREATHE_ALT_INSTALL_URL}" ]; then pip uninstall -y breathe && pip install -U ${BREATHE_ALT_INSTALL_URL}; fi
     - cd docs
     - build-docs -t $DOCTGT -bs $DOC_BUILDERS -l $DOCLANG build
+  artifacts:
+    expire_in: 4 days
+    when: always
   parallel:
     matrix:
       - DOCLANG: ["en", "zh_CN"]
-        DOCTGT: ["esp32", "esp32s2", "esp32s3", "esp32c3", "esp32c2", "esp32c6", "esp32c61", "esp32c5","esp32h2", "esp32p4"]
+        DOCTGT: ["esp32", "esp32s2", "esp32s3", "esp32c3", "esp32c2", "esp32c6", "esp32h2", "esp32p4"]
 
 check_docs_gh_links:
   image: $ESP_IDF_DOC_ENV_IMAGE
@@ -111,12 +119,26 @@ build_docs_html_full:
   extends:
     - .build_docs_template
     - .doc-rules:build:docs-full
+  needs:
+    - job: fast_template_app
+      artifacts: false
+      optional: true
+  artifacts:
+    paths:
+      - docs/_build/*/*/*.txt
+      - docs/_build/*/*/html/*
+  variables:
+    DOC_BUILDERS: "html"
+
+build_docs_html_full_prod:
+  extends:
+    - .build_docs_template
+    - .doc-rules:build:docs-full-prod
+  dependencies: [] # Stop build_docs jobs from downloading all previous job's artifacts
   artifacts:
-    when: always
     paths:
       - docs/_build/*/*/*.txt
       - docs/_build/*/*/html/*
-    expire_in: 4 days
   variables:
     DOC_BUILDERS: "html"
 
@@ -124,12 +146,14 @@ build_docs_html_partial:
   extends:
     - .build_docs_template
     - .doc-rules:build:docs-partial
+  needs:
+    - job: fast_template_app
+      artifacts: false
+      optional: true
   artifacts:
-    when: always
     paths:
       - docs/_build/*/*/*.txt
       - docs/_build/*/*/html/*
-    expire_in: 4 days
   variables:
     DOC_BUILDERS: "html"
   parallel:
@@ -139,6 +163,31 @@ build_docs_html_partial:
       - DOCLANG: "zh_CN"
         DOCTGT: "esp32p4"
 
+build_docs_pdf:
+  extends:
+    - .build_docs_template
+    - .doc-rules:build:docs-full
+  needs:
+    - job: fast_template_app
+      artifacts: false
+      optional: true
+  artifacts:
+    paths:
+      - docs/_build/*/*/latex/*
+  variables:
+    DOC_BUILDERS: "latex"
+
+build_docs_pdf_prod:
+  extends:
+    - .build_docs_template
+    - .doc-rules:build:docs-full-prod
+  dependencies: [] # Stop build_docs jobs from downloading all previous job's artifacts
+  artifacts:
+    paths:
+      - docs/_build/*/*/latex/*
+  variables:
+    DOC_BUILDERS: "latex"
+
 .deploy_docs_template:
   image: $ESP_IDF_DOC_ENV_IMAGE
   variables:
@@ -167,6 +216,8 @@ deploy_docs_preview:
       optional: true
     - job: build_docs_html_full
       optional: true
+    - job: build_docs_pdf
+      optional: true
   variables:
     TYPE: "preview"
     # older branches use DOCS_DEPLOY_KEY, DOCS_SERVER, DOCS_SERVER_USER, DOCS_PATH for preview server so we keep these names for 'preview'
@@ -181,12 +232,12 @@ deploy_docs_production:
   # The DOCS_PROD_* variables used by this job are "Protected" so these branches must all be marked "Protected" in Gitlab settings
   extends:
     - .deploy_docs_template
-  rules:
-    - <<: *if-protected-no_label
+    - .doc-rules:build:docs-full-prod
   stage: post_deploy
   dependencies:  # set dependencies to null to avoid missing artifacts issue
   needs: # ensure runs after push_to_github succeeded
-    - build_docs_html_full
+    - build_docs_html_full_prod
+    - build_docs_pdf_prod
     - job: push_to_github
       artifacts: false
   variables:
@@ -201,19 +252,16 @@ deploy_docs_production:
 check_doc_links:
   extends:
     - .build_docs_template
-  rules:
-    - <<: *if-protected-no_label
+    - .doc-rules:build:docs-full-prod
   stage: post_deploy
   needs:
     - job: deploy_docs_production
       artifacts: false
   tags: ["build", "amd64", "internet"]
   artifacts:
-    when: always
     paths:
       - docs/_build/*/*/*.txt
       - docs/_build/*/*/linkcheck/*.txt
-    expire_in: 1 week
   allow_failure: true
   script:
     - cd docs

.gitlab/ci/host-test.yml

@@ -34,16 +34,22 @@ check_public_headers:
     - IDF_TARGET=esp32p4 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
     - IDF_TARGET=esp32c61 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
 
+test_nvs_on_host:
+  extends: .host_test_template
+  script:
+    - cd components/nvs_flash/test_nvs_host
+    - make test
+
 test_nvs_coverage:
   extends:
     - .host_test_template
     - .rules:labels:nvs_coverage
   artifacts:
     paths:
-      - components/nvs_flash/host_test/nvs_host_test/coverage_report
+      - components/nvs_flash/test_nvs_host/coverage_report
   script:
-    - cd components/nvs_flash/host_test/nvs_host_test
-    - idf.py build coverage
+    - cd components/nvs_flash/test_nvs_host
+    - make coverage_report
   # the 'long' host tests take approx 11 hours on our current runners. Adding some margin here for possible CPU contention
   timeout: 18 hours
 
@@ -62,6 +68,22 @@ test_ldgen_on_host:
   variables:
     LC_ALL: C.UTF-8
 
+test_reproducible_build:
+  extends: .host_test_template
+  script:
+    - ./tools/ci/test_reproducible_build.sh
+  artifacts:
+    when: on_failure
+    paths:
+      - "**/sdkconfig"
+      - "**/build*/*.bin"
+      - "**/build*/*.elf"
+      - "**/build*/*.map"
+      - "**/build*/flasher_args.json"
+      - "**/build*/*.bin"
+      - "**/build*/bootloader/*.bin"
+      - "**/build*/partition_table/*.bin"
+
 test_spiffs_on_host:
   extends: .host_test_template
   script:
@@ -111,7 +133,7 @@ test_cli_installer:
   script:
     # Tools must be downloaded for testing
     # We could use "idf_tools.py download all", but we don't want to install clang because of its huge size
-    - python3 ${IDF_PATH}/tools/idf_tools.py download required qemu-riscv32 qemu-xtensa cmake
+    - python3 ${IDF_PATH}/tools/idf_tools.py download required qemu-riscv32 qemu-xtensa
     - cd ${IDF_PATH}/tools/test_idf_tools
     - python3 -m pip install jsonschema
     - python3 ./test_idf_tools.py -v
@@ -195,7 +217,7 @@ test_tools:
       junit: ${IDF_PATH}/XUNIT_*.xml
   variables:
     LC_ALL: C.UTF-8
-    INSTALL_EXTRA_TOOLS: "qemu-xtensa qemu-riscv32"  # for test_idf_qemu.py
+    INSTALL_QEMU: 1  # for test_idf_qemu.py
   script:
     - stat=0
     - cd ${IDF_PATH}/tools/ci/test_autocomplete
@@ -206,8 +228,6 @@ test_tools:
     - pytest --noconftest test_idf_qemu.py     --junitxml=${IDF_PATH}/XUNIT_IDF_PY_QEMU.xml               || stat=1
     - cd ${IDF_PATH}/tools/test_mkdfu
     - pytest --noconftest test_mkdfu.py        --junitxml=${IDF_PATH}/XUNIT_MKDFU.xml                     || stat=1
-    - cd ${IDF_PATH}/tools/test_idf_size
-    - pytest --noconftest test_idf_size.py     --junitxml=${IDF_PATH}/XUNIT_IDF_SIZE.xml                  || stat=1
     - cd ${IDF_PATH}
     - shellcheck -s sh tools/detect_python.sh                                                             || stat=1
     - shellcheck -s bash tools/detect_python.sh                                                           || stat=1
@@ -233,7 +253,6 @@ test_mqtt_on_host:
 
 test_transport_on_host:
   extends: .host_test_template
-  allow_failure: true # IDFCI-2781 [v5.5, v5.4] test_transport_on_host fails on ubuntu 24.04
   script:
     - cd ${IDF_PATH}/components/tcp_transport/host_test
     - idf.py build
@@ -277,18 +296,17 @@ test_pytest_qemu:
   artifacts:
     paths:
       - XUNIT_RESULT.xml
-      - pytest-embedded/
-      - "**/build*/*.bin"
+      - pytest_embedded_log/
     reports:
       junit: XUNIT_RESULT.xml
+  allow_failure: true # IDFCI-1752
   parallel:
     matrix:
-      - IDF_TARGET: "esp32"
-        INSTALL_EXTRA_TOOLS: "qemu-xtensa"
-      - IDF_TARGET: "esp32c3"
-        INSTALL_EXTRA_TOOLS: "qemu-riscv32"
+      - IDF_TARGET: [esp32, esp32c3]
+  variables:
+    INSTALL_QEMU: 1
   script:
-    - run_cmd python tools/ci/ci_build_apps.py . -v
+    - run_cmd python tools/ci/ci_build_apps.py . -vv
       --target $IDF_TARGET
       --pytest-apps
       -m qemu
@@ -298,7 +316,6 @@ test_pytest_qemu:
     - python tools/ci/get_known_failure_cases_file.py
     - run_cmd pytest
       --target $IDF_TARGET
-      --log-cli-level DEBUG
       -m qemu
       --embedded-services idf,qemu
       --junitxml=XUNIT_RESULT.xml
@@ -313,12 +330,12 @@ test_pytest_linux:
   artifacts:
     paths:
       - XUNIT_RESULT.xml
-      - pytest-embedded/
+      - pytest_embedded_log/
       - "**/build*/build_log.txt"
     reports:
       junit: XUNIT_RESULT.xml
   script:
-    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -v
+    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -vv
       --target linux
       --pytest-apps
       -m host_test
@@ -329,38 +346,6 @@ test_pytest_linux:
     - run_cmd pytest
       --target linux
       -m host_test
-      --embedded-services idf
-      --junitxml=XUNIT_RESULT.xml
-      --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
-      --app-info-filepattern \"list_job_*.txt\"
-
-test_pytest_macos:
-  extends:
-    - .host_test_template
-    - .before_script:build:macos
-  tags:
-    - macos_shell
-  artifacts:
-    paths:
-      - XUNIT_RESULT.xml
-      - pytest-embedded/
-      - "**/build*/build_log.txt"
-    reports:
-      junit: XUNIT_RESULT.xml
-  variables:
-    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
-  script:
-    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -v
-      --target linux
-      --pytest-apps
-      -m \"host_test and macos_shell\"
-      --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - python tools/ci/get_known_failure_cases_file.py
-    - run_cmd pytest
-      --target linux
-      -m \"host_test and macos_shell\"
       --junitxml=XUNIT_RESULT.xml
       --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
       --app-info-filepattern \"list_job_*.txt\"
@@ -375,55 +360,5 @@ test_idf_pytest_plugin:
     reports:
       junit: XUNIT_RESULT.xml
   script:
-    - cd ${IDF_PATH}/tools/ci/dynamic_pipelines/tests/test_report_generator
-    - python -m unittest test_report_generator.py
-    - cd ${IDF_PATH}/tools/ci/idf_pytest
+    - cd tools/ci/idf_pytest
     - pytest --junitxml=${CI_PROJECT_DIR}/XUNIT_RESULT.xml
-
-test_idf_build_apps_load_soc_caps:
-  extends: .host_test_template
-  script:
-    - python tools/ci/check_soc_headers_load_in_idf_build_apps.py
-
-test_nvs_gen_check:
-  extends: .host_test_template
-  artifacts:
-    paths:
-      - XUNIT_RESULT.xml
-      - components/nvs_flash/nvs_partition_tool
-    reports:
-      junit: XUNIT_RESULT.xml
-  variables:
-    LC_ALL: C.UTF-8
-  script:
-    - cd ${IDF_PATH}/components/nvs_flash/nvs_partition_tool
-    - pytest --noconftest test_nvs_gen_check.py --junitxml=XUNIT_RESULT.xml
-
-test_esp_rom:
-  extends: .host_test_template
-  artifacts:
-    paths:
-      - XUNIT_RESULT.xml
-    reports:
-      junit: XUNIT_RESULT.xml
-  script:
-    - cd ${IDF_PATH}/components/esp_rom/
-    - pytest --noconftest test_esp_rom.py --junitxml=XUNIT_RESULT.xml
-
-make_sure_soc_caps_compatible_in_idf_build_apps:
-    extends:
-      - .host_test_template
-      - .rules:dev-push
-    artifacts:
-      paths:
-        - new.json
-        - base.json
-      when: always
-    when: manual
-    script:
-      - python tools/ci/idf_build_apps_dump_soc_caps.py new.json
-      - git fetch --depth=1 origin $CI_MERGE_REQUEST_DIFF_BASE_SHA
-      - git checkout -f $CI_MERGE_REQUEST_DIFF_BASE_SHA
-      - git checkout $CI_COMMIT_SHA -- tools/ci/idf_build_apps_dump_soc_caps.py
-      - python tools/ci/idf_build_apps_dump_soc_caps.py base.json
-      - diff new.json base.json

.gitlab/ci/post_deploy.yml

@@ -1,13 +0,0 @@
-generate_failed_jobs_report:
-  stage: post_deploy
-  tags: [build, shiny]
-  image: $ESP_ENV_IMAGE
-  when: always
-  dependencies: []  # Do not download artifacts from the previous stages
-  artifacts:
-    expire_in: 1 week
-    when: always
-    paths:
-      - job_report.html
-  script:
-    - python tools/ci/dynamic_pipelines/scripts/generate_report.py --report-type job

.gitlab/ci/pre_check.yml

@@ -44,9 +44,6 @@ check_blobs:
     - IDF_TARGET=esp32c2 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     - IDF_TARGET=esp32c3 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     - IDF_TARGET=esp32c6 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
-    - IDF_TARGET=esp32c5 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
-    - IDF_TARGET=esp32c61 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
-    - IDF_TARGET=esp32_host $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     # Check if Coexistence library header files match between IDF and the version used when compiling the libraries
     - IDF_TARGET=esp32 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32s2 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
@@ -55,8 +52,6 @@ check_blobs:
     - IDF_TARGET=esp32c3 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32c6 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32h2 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
-    - IDF_TARGET=esp32c5 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
-    - IDF_TARGET=esp32c61 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     # Check if Wi-Fi, PHY, BT blobs contain references to specific symbols
     - bash $IDF_PATH/tools/ci/check_blobs.sh
 
@@ -117,10 +112,8 @@ check_test_scripts_build_test_rules:
   extends:
     - .pre_check_template
     - .before_script:build
-  variables:
-    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
   script:
-    # requires basic pytest dependencies
+    # required pytest related packages
     - run_cmd bash install.sh --enable-pytest
     - python tools/ci/check_build_test_rules.py check-test-scripts examples/ tools/test_apps components
 
@@ -142,7 +135,6 @@ pipeline_variables:
     # MODIFIED_FILES is a list of files that changed, could be used everywhere
     - MODIFIED_FILES=$(echo "$GIT_DIFF_OUTPUT" | xargs)
     - echo "MODIFIED_FILES=$MODIFIED_FILES" >> pipeline.env
-    - echo "REPORT_EXIT_CODE=0" >> pipeline.env
     # MR_MODIFIED_FILES and MR_MODIFIED_COMPONENTS are semicolon separated lists that is used in MR only
     # for non MR pipeline, these are empty lists
     - |
@@ -165,9 +157,6 @@ pipeline_variables:
       if [ -n "$CI_PYTHON_CONSTRAINT_BRANCH" ]; then
         echo "BUILD_AND_TEST_ALL_APPS=1" >> pipeline.env
       fi
-    - echo "OOCD_DISTRO_URL_ARMHF=$OOCD_DISTRO_URL_ARMHF" >> pipeline.env
-    - echo "OOCD_DISTRO_URL_ARM64=$OOCD_DISTRO_URL_ARM64" >> pipeline.env
-    - python tools/ci/ci_process_description.py
     - cat pipeline.env
     - python tools/ci/artifacts_handler.py upload --type modified_files_and_components_report
   artifacts:
@@ -178,46 +167,9 @@ pipeline_variables:
     expire_in: 1 week
     when: always
 
-baseline_manifest_sha:
+check_test_cases_env_markers_and_required_runners:
   extends:
     - .pre_check_template
-    - .rules:dev-push
   tags: [fast_run, shiny]
   script:
-    - |
-      # merged results pipelines, by default
-      # diff between target-branch-head and merged-result-head
-      if [ -n "$CI_MERGE_REQUEST_TARGET_BRANCH_SHA" ]; then
-        git fetch origin $CI_MERGE_REQUEST_TARGET_BRANCH_SHA --depth=1
-        git checkout FETCH_HEAD
-        idf-build-apps dump-manifest-sha \
-          --manifest-files $(find . -name ".build-test-rules.yml" | xargs) \
-          --output .manifest_sha
-      # merge request pipelines, when the mr got conflicts
-      # diff between diff-base-sha and merge-request-head
-      elif [ -n "$CI_MERGE_REQUEST_DIFF_BASE_SHA" ]; then
-        git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1
-        git checkout FETCH_HEAD
-        idf-build-apps dump-manifest-sha \
-          --manifest-files $(find . -name ".build-test-rules.yml" | xargs) \
-          --output .manifest_sha
-      # other pipelines, like the protected branches pipelines
-      # not triggered in this job
-      fi
-  artifacts:
-    paths:
-      - .manifest_sha
-    expire_in: 1 week
-    when: always
-
-redundant_pass_job:
-  stage: pre_check
-  tags: [shiny, fast_run]
-  image: $ESP_ENV_IMAGE
-  dependencies: null
-  before_script: []
-  cache: []
-  extends: []
-  script:
-    - echo "This job is redundant to ensure the 'retry_failed_jobs' job can exist and not be skipped"
-  when: always
+    - python tools/ci/dynamic_pipelines/scripts/generate_target_test_child_pipeline.py --check

.gitlab/ci/pre_commit.yml

@@ -45,36 +45,3 @@ check_pre_commit:
       paths:
         - .cache/submodule_archives
       policy: pull
-
-check_powershell:
-  extends:
-    - .before_script:minimal
-  stage: pre_check
-  image: docker:latest
-  services:
-    - docker:dind
-  tags:
-    - dind
-    - amd64
-  needs:
-    - pipeline_variables
-  variables:
-    # cache pre_commit
-    PRE_COMMIT_HOME: "$CI_PROJECT_DIR/.cache/pre-commit"
-  rules:
-    - changes:
-        - "*.ps1"
-  script:
-    - apk add python3
-    - apk add py3-pip
-    - pip install pre-commit --break-system-packages
-    - pre-commit run --hook-stage manual check-powershell-scripts --files $MODIFIED_FILES
-  cache:
-    - key: pre_commit-cache-${LATEST_GIT_TAG}
-      paths:
-        - .cache/pre-commit
-      policy: pull
-    - key: submodule-cache-${LATEST_GIT_TAG}
-      paths:
-        - .cache/submodule_archives
-      policy: pull

.gitlab/ci/retry_failed_jobs.yml

@@ -1,15 +0,0 @@
-retry_failed_jobs:
-  stage: retry_failed_jobs
-  tags: [shiny, fast_run]
-  allow_failure: true
-  image: $ESP_ENV_IMAGE
-  dependencies: null
-  before_script: []
-  cache: []
-  extends: []
-  script:
-    - echo "Retrieving and retrying all failed jobs for the pipeline..."
-    - python tools/ci/python_packages/gitlab_api.py retry_failed_jobs $CI_MERGE_REQUEST_PROJECT_ID --pipeline_id $CI_PIPELINE_ID
-  when: manual
-  needs:
-    - redundant_pass_job

.gitlab/ci/rules.yml

@@ -66,8 +66,6 @@
   - "tools/ci/check_esp_memory_utils_headers.sh"
   - "tools/ci/check_blobs.sh"
   - "tools/ci/check_public_headers.py"
-  - "tools/ci/check_register_rw_half_word.cmake"
-  - "tools/ci/check_register_rw_half_word.py"
 
 .patterns-host_test: &patterns-host_test
   - ".gitlab/ci/host-test.yml"
@@ -83,14 +81,11 @@
 
   - "tools/idf_monitor.py"
 
-  - "tools/activate.py"
-
   - "tools/idf.py"
   - "tools/idf_py_actions/**/*"
   - "tools/test_idf_py/**/*"
 
   - "tools/idf_size.py"
-  - "tools/test_idf_size/**/*"
 
   - "tools/tools.json"
   - "tools/tools_schema.json"
@@ -98,11 +93,6 @@
   - "tools/test_idf_tools/**/*"
   - "tools/install_util.py"
 
-  - "tools/export_utils/utils.py"
-  - "tools/export_utils/shell_types.py"
-  - "tools/export_utils/console_output.py"
-  - "tools/export_utils/activate_venv.py"
-
   - "tools/requirements/*"
   - "tools/requirements.json"
   - "tools/requirements_schema.json"
@@ -115,6 +105,8 @@
   - "tools/detect_python.sh"
   - "tools/detect_python.fish"
 
+  - "tools/ci/test_reproducible_build.sh"
+
   - "tools/gen_soc_caps_kconfig/*"
   - "tools/gen_soc_caps_kconfig/test/test_gen_soc_caps_kconfig.py"
 
@@ -155,7 +147,6 @@
 
 .patterns-idf-pytest-plugin: &patterns-idf-pytest-plugin
   - "tools/ci/idf_pytest/**/*"
-  - "tools/ci/dynamic_pipelines/tests/**/*"
 
 ##############
 # if anchors #
@@ -225,10 +216,6 @@
   rules:
     - <<: *if-tag-release
 
-.rules:dev-push:
-  rules:
-    - <<: *if-dev-push
-
 # Do not upload caches on dev branches by default
 .rules:upload-python-cache:
   rules:
@@ -261,14 +248,14 @@
     - <<: *if-dev-push
       changes: *patterns-python-files
 
-#.rules:patterns:static-code-analysis-preview:
-#  rules:
-#    - <<: *if-dev-push
-#      changes: *patterns-c-files
-#    - <<: *if-dev-push
-#      changes: *patterns-python-files
-#    - <<: *if-dev-push
-#      changes: *patterns-sonarqube-files
+.rules:patterns:static-code-analysis-preview:
+  rules:
+    - <<: *if-dev-push
+      changes: *patterns-c-files
+    - <<: *if-dev-push
+      changes: *patterns-python-files
+    - <<: *if-dev-push
+      changes: *patterns-sonarqube-files
 
 .rules:patterns:idf-pytest-plugin:
   rules:

.gitlab/ci/static-code-analysis.yml

@@ -38,84 +38,84 @@ check_pylint:
       fi
     - if [ -z "$files" ]; then echo "No python files found"; exit 0; fi
     - run_cmd pylint --exit-zero --load-plugins=pylint_gitlab --output-format=gitlab-codeclimate:pylint.json $files
+
+# build stage
+# Sonarqube related jobs put here for this reason:
+# Here we have two jobs. code_quality_check and code_quality_report.
 #
-## build stage
-## Sonarqube related jobs put here for this reason:
-## Here we have two jobs. code_quality_check and code_quality_report.
-##
-## code_quality_check will analyze the code changes between your MR and
-## code repo stored in sonarqube server. The analysis result is only shown in
-## the comments under this MR and won't be transferred to the server.
-##
-## code_quality_report will analyze and transfer both of the newly added code
-## and the analysis result to the server.
-##
-## Put in the front to ensure that the newly merged code can be stored in
-## sonarqube server ASAP, in order to avoid reporting unrelated code issues
-#.sonar_scan_template:
-#  stage: build
-#  extends: .pre_check_template
-#  # full clone since this image does not support fetch --shallow-since-cutoff
-#  # shiny runners are used for full clone
-#  tags: [build, shiny]
-#  image: $SONARQUBE_SCANNER_IMAGE
-#  before_script:
-#    - source tools/ci/utils.sh
-#    - export PYTHONPATH="$CI_PROJECT_DIR/tools:$CI_PROJECT_DIR/tools/ci/python_packages:$PYTHONPATH"
-#    - fetch_submodules
-#    # Exclude the submodules, all paths ends with /**
-#    - submodules=$(get_all_submodules)
-#    # get all exclude paths specified in tools/ci/sonar_exclude_list.txt | ignore lines start with # | xargs | replace all <space> to <comma>
-#    - custom_excludes=$(cat $CI_PROJECT_DIR/tools/ci/sonar_exclude_list.txt | grep -v '^#' | xargs | sed -e 's/ /,/g')
-#    # Exclude the report dir as well
-#    - export EXCLUSIONS="$custom_excludes,$submodules"
-#    - export SONAR_SCANNER_OPTS="-Xmx2048m"
-#  variables:
-#    GIT_DEPTH: 0
-#    REPORT_PATTERN: clang_tidy_reports/**/*.txt
-#  artifacts:
-#    paths:
-#      - $REPORT_PATTERN
-#    expire_in: 1 week
-#    when: always
-#  dependencies:  # Here is not a hard dependency relationship, could be skipped when only python files changed. so we do not use "needs" here.
-#    - clang_tidy_check
+# code_quality_check will analyze the code changes between your MR and
+# code repo stored in sonarqube server. The analysis result is only shown in
+# the comments under this MR and won't be transferred to the server.
 #
-#code_quality_check:
-#  extends:
-#    - .sonar_scan_template
-#    - .rules:patterns:static-code-analysis-preview
-#  allow_failure: true  # it's using exit code to indicate the code analysis result,
-#                       # we don't want to block ci when critical issues founded
-#  script:
-#    - export CI_MERGE_REQUEST_COMMITS=$(python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py commits --src-branch ${CI_COMMIT_REF_NAME} | tr '\n' ',')
-#    # test if this branch have merge request, if not, exit 0
-#    - test -n "$CI_MERGE_REQUEST_IID" || exit 0
-#    - test -n "$CI_MERGE_REQUEST_COMMITS" || exit 0
-#    - sonar-scanner
-#      -Dsonar.analysis.mode=preview
-#      -Dsonar.branch.name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
-#      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
-#      -Dsonar.exclusions=$EXCLUSIONS
-#      -Dsonar.gitlab.ci_merge_request_iid=$CI_MERGE_REQUEST_IID
-#      -Dsonar.gitlab.commit_sha=$CI_MERGE_REQUEST_COMMITS
-#      -Dsonar.gitlab.merge_request_discussion=true
-#      -Dsonar.gitlab.ref_name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
-#      -Dsonar.host.url=$SONAR_HOST_URL
-#      -Dsonar.login=$SONAR_LOGIN
+# code_quality_report will analyze and transfer both of the newly added code
+# and the analysis result to the server.
 #
-#code_quality_report:
-#  extends:
-#    - .sonar_scan_template
-#    - .rules:protected
-#  allow_failure: true  # it's using exit code to indicate the code analysis result,
-#                       # we don't want to block ci when critical issues founded
-#  script:
-#    - sonar-scanner
-#      -Dsonar.branch.name=$CI_COMMIT_REF_NAME
-#      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
-#      -Dsonar.exclusions=$EXCLUSIONS
-#      -Dsonar.gitlab.commit_sha=$PIPELINE_COMMIT_SHA
-#      -Dsonar.gitlab.ref_name=$CI_COMMIT_REF_NAME
-#      -Dsonar.host.url=$SONAR_HOST_URL
-#      -Dsonar.login=$SONAR_LOGIN
+# Put in the front to ensure that the newly merged code can be stored in
+# sonarqube server ASAP, in order to avoid reporting unrelated code issues
+.sonar_scan_template:
+  stage: build
+  extends: .pre_check_template
+  # full clone since this image does not support fetch --shallow-since-cutoff
+  # shiny runners are used for full clone
+  tags: [build, shiny]
+  image: $SONARQUBE_SCANNER_IMAGE
+  before_script:
+    - source tools/ci/utils.sh
+    - export PYTHONPATH="$CI_PROJECT_DIR/tools:$CI_PROJECT_DIR/tools/ci/python_packages:$PYTHONPATH"
+    - fetch_submodules
+    # Exclude the submodules, all paths ends with /**
+    - submodules=$(get_all_submodules)
+    # get all exclude paths specified in tools/ci/sonar_exclude_list.txt | ignore lines start with # | xargs | replace all <space> to <comma>
+    - custom_excludes=$(cat $CI_PROJECT_DIR/tools/ci/sonar_exclude_list.txt | grep -v '^#' | xargs | sed -e 's/ /,/g')
+    # Exclude the report dir as well
+    - export EXCLUSIONS="$custom_excludes,$submodules"
+    - export SONAR_SCANNER_OPTS="-Xmx2048m"
+  variables:
+    GIT_DEPTH: 0
+    REPORT_PATTERN: clang_tidy_reports/**/*.txt
+  artifacts:
+    paths:
+      - $REPORT_PATTERN
+    expire_in: 1 week
+    when: always
+  dependencies:  # Here is not a hard dependency relationship, could be skipped when only python files changed. so we do not use "needs" here.
+    - clang_tidy_check
+
+code_quality_check:
+  extends:
+    - .sonar_scan_template
+    - .rules:patterns:static-code-analysis-preview
+  allow_failure: true  # it's using exit code to indicate the code analysis result,
+                       # we don't want to block ci when critical issues founded
+  script:
+    - export CI_MERGE_REQUEST_COMMITS=$(python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py commits --src-branch ${CI_COMMIT_REF_NAME} | tr '\n' ',')
+    # test if this branch have merge request, if not, exit 0
+    - test -n "$CI_MERGE_REQUEST_IID" || exit 0
+    - test -n "$CI_MERGE_REQUEST_COMMITS" || exit 0
+    - sonar-scanner
+      -Dsonar.analysis.mode=preview
+      -Dsonar.branch.name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
+      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
+      -Dsonar.exclusions=$EXCLUSIONS
+      -Dsonar.gitlab.ci_merge_request_iid=$CI_MERGE_REQUEST_IID
+      -Dsonar.gitlab.commit_sha=$CI_MERGE_REQUEST_COMMITS
+      -Dsonar.gitlab.merge_request_discussion=true
+      -Dsonar.gitlab.ref_name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
+      -Dsonar.host.url=$SONAR_HOST_URL
+      -Dsonar.login=$SONAR_LOGIN
+
+code_quality_report:
+  extends:
+    - .sonar_scan_template
+    - .rules:protected
+  allow_failure: true  # it's using exit code to indicate the code analysis result,
+                       # we don't want to block ci when critical issues founded
+  script:
+    - sonar-scanner
+      -Dsonar.branch.name=$CI_COMMIT_REF_NAME
+      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
+      -Dsonar.exclusions=$EXCLUSIONS
+      -Dsonar.gitlab.commit_sha=$PIPELINE_COMMIT_SHA
+      -Dsonar.gitlab.ref_name=$CI_COMMIT_REF_NAME
+      -Dsonar.host.url=$SONAR_HOST_URL
+      -Dsonar.login=$SONAR_LOGIN

.gitlab/ci/test-win.yml

@@ -31,7 +31,7 @@ test_cli_installer_win:
     IDF_PATH: "$CI_PROJECT_DIR"
   script:
     # Tools must be downloaded for testing
-    - python ${IDF_PATH}\tools\idf_tools.py download required qemu-riscv32 qemu-xtensa cmake
+    - python ${IDF_PATH}\tools\idf_tools.py download required qemu-riscv32 qemu-xtensa
     - cd ${IDF_PATH}\tools\test_idf_tools
     - python -m pip install jsonschema
     - python .\test_idf_tools.py

.gitlab/merge_request_templates/Minimal_Template.md

@@ -13,17 +13,3 @@
 <!-- Either state release notes or write "No release notes" -->
 
 <!-- ## Breaking change notes --><!-- Optional -->
-
-<!-- ## Dynamic Pipeline Configuration
-```yaml
-Test Case Filters:
-    # Only run tests that match the given substring expression (modified files/components will be ignored):
-    # Please use a list of strings. 
-    # This will run the test cases filtered like `pytest -k "(<list_item_1>) or (<list_item_2>) or ...`
-    # The fast pipeline will fail at the final stage.
-    # For example:
-      - test_sdm and not sdmmc
-      - test_hello_world
-    # This example will include all tests containing 'test_hello_world' in the name,
-    # and include all tests containing 'test_sdm' but not 'sdmmc' in the name.
-``` --><!-- Optional -->

.gitmodules

@@ -49,15 +49,12 @@
 [submodule "components/json/cJSON"]
 	path = components/json/cJSON
 	url = ../../DaveGamble/cJSON.git
-	sbom-version = 1.7.18
+	sbom-version = 1.7.17
 	sbom-cpe = cpe:2.3:a:cjson_project:cjson:{}:*:*:*:*:*:*:*
 	sbom-supplier = Person: Dave Gamble
 	sbom-url = https://github.com/DaveGamble/cJSON
 	sbom-description = Ultralightweight JSON parser in ANSI C
-	sbom-hash = 8f2beb57ddad1f94bed899790b00f46df893ccac
-	sbom-cve-exclude-list = CVE-2024-31755 Resolved in v1.7.18
-	sbom-cve-exclude-list = CVE-2023-26819 Resolved in commit a328d65ad490b64da8c87523cbbfe16050ba5bf6
-	sbom-cve-exclude-list = CVE-2023-53154 Resolved in v1.7.18
+	sbom-hash = 87d8f0961a01bf09bef98ff89bae9fdec42181ee
 
 [submodule "components/mbedtls/mbedtls"]
 	path = components/mbedtls/mbedtls

.pre-commit-config.yaml

@@ -23,8 +23,7 @@ repos:
             .*.pb-c.h|
             .*.pb-c.c|
             .*.yuv|
-            .*.rgb|
-            docs/sphinx-known-warnings\.txt
+            .*.rgb
           )$
       - id: end-of-file-fixer
         exclude: *whitespace_excludes
@@ -54,10 +53,9 @@ repos:
               .*_pb2.py
           )$
   - repo: https://github.com/codespell-project/codespell
-    rev: v2.3.0
+    rev: v2.2.6
     hooks:
       - id: codespell
-        exclude: ^docs/sphinx-known-warnings\.txt$
   - repo: local
     hooks:
       - id: check-executables
@@ -72,6 +70,11 @@ repos:
         language: python
         pass_filenames: false
         always_run: true
+      - id: check-deprecated-kconfigs-options
+        name: Check if any Kconfig Options Deprecated
+        entry: tools/ci/check_deprecated_kconfigs.py
+        language: python
+        files: 'sdkconfig\.ci$|sdkconfig\.rename$|sdkconfig.*$'
       - id: cmake-lint
         name: Check CMake Files Format
         entry: cmakelint --linelength=120 --spaces=4 --filter=-whitespace/indent
@@ -100,10 +103,10 @@ repos:
         name: Check type annotations in python files
         entry: tools/ci/check_type_comments.py
         additional_dependencies:
-          - 'mypy'
-          - 'mypy-extensions'
-          - 'types-setuptools'
-          - 'types-PyYAML'
+          - 'mypy==0.940'
+          - 'mypy-extensions==0.4.3'
+          - 'types-setuptools==57.4.14'
+          - 'types-PyYAML==0.1.9'
           - 'types-requests'
         exclude: >
           (?x)^(
@@ -151,7 +154,7 @@ repos:
         require_serial: true
         additional_dependencies:
           - PyYAML == 5.3.1
-          - idf-build-apps~=2.5
+          - idf-build-apps~=2.0
       - id: sort-yaml-files
         name: sort yaml files
         entry: tools/ci/sort_yaml.py
@@ -200,7 +203,7 @@ repos:
       - id: check-copyright
         args: ['--ignore', 'tools/ci/check_copyright_ignore.txt', '--config', 'tools/ci/check_copyright_config.yaml']
   - repo: https://github.com/espressif/conventional-precommit-linter
-    rev: v1.7.0
+    rev: v1.6.0
     hooks:
       - id: conventional-precommit-linter
         stages: [commit-msg]
@@ -221,11 +224,6 @@ repos:
       name: shellcheck dash (export.sh)
       args: ['--shell', 'dash', '-x']
       files: 'export.sh'
-  - repo: https://github.com/espressif/esp-pwsh-check
-    rev: v1.0.1
-    hooks:
-    - id: check-powershell-scripts
-      stages: [manual]
   - repo: https://github.com/espressif/esp-idf-sbom.git
     rev: v0.13.0
     hooks:
@@ -238,7 +236,6 @@ repos:
         name: Lint rST files in docs folder using Sphinx Lint
         files: ^(docs/en|docs/zh_CN)/.*\.(rst|inc)$
   - repo: https://github.com/espressif/esp-idf-kconfig.git
-    rev: v2.5.0
+    rev: v2.1.0
     hooks:
       - id: check-kconfig-files
-      - id: check-deprecated-kconfig-options

CMakeLists.txt

@@ -16,11 +16,7 @@ endif()
 if(NOT BOOTLOADER_BUILD)
 
     if(CONFIG_COMPILER_OPTIMIZATION_SIZE)
-        if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-            list(APPEND compile_options "-Oz")
-        else()
-            list(APPEND compile_options "-Os")
-        endif()
+        list(APPEND compile_options "-Os")
         if(CMAKE_C_COMPILER_ID MATCHES "GNU")
             list(APPEND compile_options "-freorder-blocks")
         endif()
@@ -38,11 +34,7 @@ if(NOT BOOTLOADER_BUILD)
 else()  # BOOTLOADER_BUILD
 
     if(CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE)
-        if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-            list(APPEND compile_options "-Oz")
-        else()
-            list(APPEND compile_options "-Os")
-        endif()
+        list(APPEND compile_options "-Os")
         if(CMAKE_C_COMPILER_ID MATCHES "GNU")
             list(APPEND compile_options "-freorder-blocks")
         endif()
@@ -104,7 +96,7 @@ if(CMAKE_C_COMPILER_ID MATCHES "Clang")
     list(APPEND compile_options "-Wno-pointer-bool-conversion")
     # mbedTLS md5.c triggers this warning in md5_test_buf (false positive)
     list(APPEND compile_options "-Wno-string-concatenation")
-    # multiple cases of implicit conversions between unrelated enum types
+    # multiple cases of implict convertions between unrelated enum types
     list(APPEND compile_options "-Wno-enum-conversion")
     # When IRAM_ATTR is specified both in function declaration and definition,
     # it produces different section names, since section names include __COUNTER__.
@@ -144,10 +136,6 @@ if(CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE)
     list(APPEND compile_definitions "-DNDEBUG")
 endif()
 
-if(CONFIG_COMPILER_NO_MERGE_CONSTANTS)
-    list(APPEND compile_options "-fno-merge-constants")
-endif()
-
 if(CONFIG_COMPILER_STACK_CHECK_MODE_NORM)
     list(APPEND compile_options "-fstack-protector")
 elseif(CONFIG_COMPILER_STACK_CHECK_MODE_STRONG)
@@ -160,8 +148,46 @@ if(CONFIG_COMPILER_DUMP_RTL_FILES)
     list(APPEND compile_options "-fdump-rtl-expand")
 endif()
 
-__generate_prefix_map(prefix_map_compile_options)
-list(APPEND compile_options ${prefix_map_compile_options})
+if(NOT ${CMAKE_C_COMPILER_VERSION} VERSION_LESS 8.0.0)
+    if(CONFIG_COMPILER_HIDE_PATHS_MACROS)
+        list(APPEND compile_options "-fmacro-prefix-map=${CMAKE_SOURCE_DIR}=.")
+        list(APPEND compile_options "-fmacro-prefix-map=${IDF_PATH}=/IDF")
+    endif()
+
+    if(CONFIG_APP_REPRODUCIBLE_BUILD)
+        idf_build_set_property(DEBUG_PREFIX_MAP_GDBINIT "${BUILD_DIR}/prefix_map_gdbinit")
+
+        list(APPEND compile_options "-fdebug-prefix-map=${IDF_PATH}=/IDF")
+        list(APPEND compile_options "-fdebug-prefix-map=${PROJECT_DIR}=/IDF_PROJECT")
+        list(APPEND compile_options "-fdebug-prefix-map=${BUILD_DIR}=/IDF_BUILD")
+
+        # component dirs
+        idf_build_get_property(python PYTHON)
+        idf_build_get_property(idf_path IDF_PATH)
+        idf_build_get_property(component_dirs BUILD_COMPONENT_DIRS)
+
+        execute_process(
+            COMMAND ${python}
+                "${idf_path}/tools/generate_debug_prefix_map.py"
+                "${BUILD_DIR}"
+                "${component_dirs}"
+            OUTPUT_VARIABLE result
+            RESULT_VARIABLE ret
+        )
+        if(NOT ret EQUAL 0)
+            message(FATAL_ERROR "This is a bug. Please report to https://github.com/espressif/esp-idf/issues")
+        endif()
+
+        spaces2list(result)
+        list(LENGTH component_dirs length)
+        math(EXPR max_index "${length} - 1")
+        foreach(index RANGE ${max_index})
+            list(GET component_dirs ${index} folder)
+            list(GET result ${index} after)
+            list(APPEND compile_options "-fdebug-prefix-map=${folder}=${after}")
+        endforeach()
+    endif()
+endif()
 
 if(CONFIG_COMPILER_DISABLE_GCC12_WARNINGS)
     list(APPEND compile_options "-Wno-address"
@@ -175,22 +201,10 @@ if(CONFIG_COMPILER_DISABLE_GCC13_WARNINGS)
                                     "-Wno-dangling-reference")
 endif()
 
-if(CONFIG_COMPILER_DISABLE_GCC14_WARNINGS)
-    list(APPEND compile_options "-Wno-calloc-transposed-args")
-endif()
-
-if(CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS)
-    if(NOT CMAKE_C_COMPILER_ID MATCHES "Clang")
-        idf_build_replace_option_from_property(COMPILE_OPTIONS "-Werror" "-Werror=all")
-    endif()
-endif()
-
 # GCC-specific options
 if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
-    list(APPEND compile_options "-fstrict-volatile-bitfields")
-    if(CONFIG_COMPILER_STATIC_ANALYZER)
-        list(APPEND compile_options "-fanalyzer")
-    endif()
+    list(APPEND compile_options "-fstrict-volatile-bitfields"
+                                )
 endif()
 
 if(CONFIG_ESP_SYSTEM_USE_EH_FRAME)
@@ -201,35 +215,8 @@ endif()
 list(APPEND link_options "-fno-lto")
 
 if(CONFIG_IDF_TARGET_LINUX AND CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin")
-    # Not all versions of the MacOS linker support the -warn_commons flag.
-    # ld version 1053.12 (and above) have been tested to support it.
-    # Hence, we extract the version string from the linker output
-    # before including the flag.
-
-    # Get the ld version, capturing both stdout and stderr
-    execute_process(
-        COMMAND ${CMAKE_LINKER} -v
-        OUTPUT_VARIABLE LD_VERSION_OUTPUT
-        ERROR_VARIABLE LD_VERSION_ERROR
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        ERROR_STRIP_TRAILING_WHITESPACE
-    )
-
-    # Combine stdout and stderr
-    set(LD_VERSION_OUTPUT "${LD_VERSION_OUTPUT}\n${LD_VERSION_ERROR}")
-
-    # Extract the version string
-    string(REGEX MATCH "PROJECT:(ld|dyld)-([0-9]+)\\.([0-9]+)" LD_VERSION_MATCH "${LD_VERSION_OUTPUT}")
-    set(LD_VERSION_MAJOR_MINOR "${CMAKE_MATCH_2}.${CMAKE_MATCH_3}")
-
-    message(STATUS "Linker Version: ${LD_VERSION_MAJOR_MINOR}")
-
-    # Compare the version with 1053.12
-    if(LD_VERSION_MAJOR_MINOR VERSION_GREATER_EQUAL "1053.12")
-        list(APPEND link_options "-Wl,-warn_commons")
-    endif()
-
     list(APPEND link_options "-Wl,-dead_strip")
+    list(APPEND link_options "-Wl,-warn_commons")
 else()
     list(APPEND link_options "-Wl,--gc-sections")
     list(APPEND link_options "-Wl,--warn-common")
@@ -251,9 +238,7 @@ if(CMAKE_C_COMPILER_ID MATCHES "GNU")
 endif()
 
 if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-    list(APPEND compile_options "-fno-use-cxa-atexit")  # TODO IDF-10934
-else()
-    list(APPEND cxx_compile_options "-fuse-cxa-atexit")
+    list(APPEND compile_options "-fno-use-cxa-atexit")
 endif()
 
 if(COMPILER_RT_LIB_NAME)

COMPATIBILITY.md

@@ -61,10 +61,14 @@ Supported since ESP-IDF v4.2.
 
 ### ESP32-C3
 
-#### v0.2 - v0.4
+#### v0.2, v0.3
 
 Supported since ESP-IDF v4.3.
 
+#### v0.4
+
+To be added.
+
 #### v1.1
 
 | Release branch         | Recommended | Required |
@@ -84,18 +88,17 @@ Supported since ESP-IDF v4.4.
 
 ### ESP32-C2 & ESP8684
 
-#### v1.0, v1.1
+#### v1.0
 
 Supported since ESP-IDF v5.0.
 
+#### v1.1
+
+To be added.
+
 #### v1.2
 
-| Release branch         | Recommended | Required |
-|------------------------|-------------|----------|
-| release/v5.0           | v5.0.7+     | v5.0     |
-| release/v5.1           | v5.1.4+     | v5.1     |
-| release/v5.2           | v5.2.2+     | v5.2     |
-| release/v5.3 and above | v5.3+       | v5.3     |
+To be added.
 
 ### ESP32-C6
 

COMPATIBILITY_CN.md

@@ -61,10 +61,14 @@
 
 ### ESP32-C3
 
-#### v0.2 - v0.4
+#### v0.2 和 v0.3
 
 从 ESP-IDF v4.3 开始支持。
 
+#### v0.4
+
+待更新。
+
 #### v1.1
 
 | 发布分支                | 推荐版本      | 需求版本  |
@@ -84,18 +88,17 @@
 
 ### ESP32-C2 & ESP8684
 
-#### v1.0, v1.1
+#### v1.0
 
 从 ESP-IDF v5.0 开始支持。
 
+#### v1.1
+
+待更新。
+
 #### v1.2
 
-| 发布分支                | 推荐版本      | 需求版本  |
-|------------------------|-------------|----------|
-| release/v5.0           | v5.0.7+     | v5.0     |
-| release/v5.1           | v5.1.4+     | v5.1     |
-| release/v5.2           | v5.2.2+     | v5.1     |
-| release/v5.3 及以上     | v5.3+       | v5.3     |
+待更新。
 
 ### ESP32-C6
 

Kconfig

@@ -48,10 +48,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
         bool
         default "y" if IDF_TOOLCHAIN="clang"
 
-    config IDF_TOOLCHAIN_GCC
-        bool
-        default "y" if IDF_TOOLCHAIN="gcc"
-
     config IDF_TARGET_ARCH_RISCV
         bool
         default "n"
@@ -79,6 +75,10 @@ mainmenu "Espressif IoT Development Framework Configuration"
         string
         default "$IDF_INIT_VERSION"
 
+    config IDF_TARGET_LINUX
+        bool
+        default "y" if IDF_TARGET="linux"
+
     config IDF_TARGET_ESP32
         bool
         default "y" if IDF_TARGET="esp32"
@@ -119,6 +119,28 @@ mainmenu "Espressif IoT Development Framework Configuration"
         select FREERTOS_UNICORE
         select IDF_TARGET_ARCH_RISCV
 
+    # TODO: IDF-9197
+    choice IDF_TARGET_ESP32C5_VERSION
+        prompt "ESP32-C5 version"
+        depends on IDF_TARGET_ESP32C5
+        default IDF_TARGET_ESP32C5_MP_VERSION
+        help
+            ESP32-C5 will support two versions for a period.
+            This option is for internal use only.
+            Select the one that matches your chip model.
+
+        config IDF_TARGET_ESP32C5_BETA3_VERSION
+            bool
+            prompt "ESP32-C5 beta3"
+            select ESPTOOLPY_NO_STUB
+
+        config IDF_TARGET_ESP32C5_MP_VERSION
+            bool
+            prompt "ESP32-C5 MP"
+            select ESPTOOLPY_NO_STUB
+            select IDF_ENV_FPGA
+    endchoice
+
     config IDF_TARGET_ESP32P4
         bool
         default "y" if IDF_TARGET="esp32p4"
@@ -135,6 +157,7 @@ mainmenu "Espressif IoT Development Framework Configuration"
         default "y" if IDF_TARGET="esp32c61"
         select FREERTOS_UNICORE
         select IDF_TARGET_ARCH_RISCV
+        select IDF_ENV_FPGA
 
     config IDF_TARGET_LINUX
         bool
@@ -150,7 +173,8 @@ mainmenu "Espressif IoT Development Framework Configuration"
         default 0x000D if IDF_TARGET_ESP32C6
         default 0x0010 if IDF_TARGET_ESP32H2
         default 0x0012 if IDF_TARGET_ESP32P4
-        default 0x0017 if IDF_TARGET_ESP32C5
+        default 0x0011 if IDF_TARGET_ESP32C5 && IDF_TARGET_ESP32C5_BETA3_VERSION  # TODO: IDF-9197
+        default 0x0017 if IDF_TARGET_ESP32C5 && IDF_TARGET_ESP32C5_MP_VERSION     # TODO: IDF-9197
         default 0x0014 if IDF_TARGET_ESP32C61
         default 0xFFFF
 
@@ -323,8 +347,8 @@ mainmenu "Espressif IoT Development Framework Configuration"
             help
                 This option sets compiler optimization level (gcc -O argument) for the app.
 
-                - The "Debug" setting will add the -Og flag to CFLAGS.
-                - The "Size" setting will add the -Os flag to CFLAGS (-Oz with Clang).
+                - The "Debug" setting will add the -0g flag to CFLAGS.
+                - The "Size" setting will add the -0s flag to CFLAGS.
                 - The "Performance" setting will add the -O2 flag to CFLAGS.
                 - The "None" setting will add the -O0 flag to CFLAGS.
 
@@ -345,7 +369,7 @@ mainmenu "Espressif IoT Development Framework Configuration"
             config COMPILER_OPTIMIZATION_DEBUG
                 bool "Debug (-Og)"
             config COMPILER_OPTIMIZATION_SIZE
-                bool "Optimize for size (-Os with GCC, -Oz with Clang)"
+                bool "Optimize for size (-Os)"
             config COMPILER_OPTIMIZATION_PERF
                 bool "Optimize for performance (-O2)"
             config COMPILER_OPTIMIZATION_NONE
@@ -388,21 +412,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
 
         endchoice # assertions
 
-        config COMPILER_ASSERT_NDEBUG_EVALUATE
-            bool "Enable the evaluation of the expression inside assert(X) when NDEBUG is set"
-            default y
-            help
-                When NDEBUG is set, assert(X) will not cause code to trigger an assertion.
-                With this option set, assert(X) will still evaluate the expression X, though
-                the result will never cause an assertion. This means that if X is a function
-                then the function will be called.
-
-                This is not according to the standard, which states that the assert(X) should
-                be replaced with ((void)0) if NDEBUG is defined.
-
-                In ESP-IDF v6.0 the default behavior will change to "no" to be in line with the
-                standard.
-
         choice COMPILER_FLOAT_LIB_FROM
             prompt "Compiler float lib source"
             default COMPILER_FLOAT_LIB_FROM_RVFPLIB if ESP_ROM_HAS_RVFPLIB
@@ -524,15 +533,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
             help
                 Stack smashing protection.
 
-        config COMPILER_NO_MERGE_CONSTANTS
-            bool "Disable merging const sections"
-            depends on IDF_TOOLCHAIN_GCC
-            help
-                Disable merging identical constants (string/floating-point) across compilation units.
-                This helps in better size analysis of the application binary as the rodata section
-                distribution is more uniform across libraries. On downside, it may increase
-                the binary size and hence should be used during development phase only.
-
         config COMPILER_WARN_WRITE_STRINGS
             bool "Enable -Wwrite-strings warning flag"
             default "n"
@@ -559,20 +559,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
 
                 This option can be enabled for RISC-V targets only.
 
-        config COMPILER_DISABLE_DEFAULT_ERRORS
-            bool "Disable errors for default warnings"
-            default "y"
-            help
-                Enable this option if you do not want default warnings to be considered as errors,
-                especially when updating IDF.
-
-                This is a temporary flag that could help to allow upgrade while having
-                some time to address the warnings raised by those default warnings.
-                Alternatives are:
-                1) fix code (preferred),
-                2) remove specific warnings,
-                3) do not consider specific warnings as error.
-
         config COMPILER_DISABLE_GCC12_WARNINGS
             bool "Disable new warnings introduced in GCC 12"
             default "n"
@@ -587,13 +573,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
                 Enable this option if use GCC 13 or newer, and want to disable warnings which don't appear with
                 GCC 12.
 
-        config COMPILER_DISABLE_GCC14_WARNINGS
-            bool "Disable new warnings introduced in GCC 14"
-            default "n"
-            help
-                Enable this option if use GCC 14 or newer, and want to disable warnings which don't appear with
-                GCC 13.
-
         config COMPILER_DUMP_RTL_FILES
             bool "Dump RTL files during compilation"
             help
@@ -628,34 +607,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
             default "gcc" if COMPILER_RT_LIB_GCCLIB
             default "" if COMPILER_RT_LIB_HOST
 
-        choice COMPILER_ORPHAN_SECTIONS
-            prompt "Orphan sections handling"
-            default COMPILER_ORPHAN_SECTIONS_WARNING
-            depends on !IDF_TARGET_LINUX
-            help
-                If the linker finds orphan sections, it attempts to place orphan sections after sections of the same
-                attribute such as code vs data, loadable vs non-loadable, etc.
-                That means that orphan sections could placed between sections defined in IDF linker scripts.
-                This could lead to corruption of the binary image. Configure the linker action here.
-
-            config COMPILER_ORPHAN_SECTIONS_WARNING
-                bool "Place with warning"
-                help
-                    Places orphan sections with a warning message.
-
-            config COMPILER_ORPHAN_SECTIONS_PLACE
-                bool "Place silently"
-                help
-                    Places orphan sections without a warning/error message.
-        endchoice
-
-        config COMPILER_STATIC_ANALYZER
-            bool "Enable compiler static analyzer"
-            default "n"
-            depends on IDF_TOOLCHAIN_GCC
-            help
-                Enable compiler static analyzer. This may produce false-positive results and increases compile time.
-
     endmenu # Compiler Options
 
     menu "Component config"
@@ -676,6 +627,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
             - CONFIG_ESPTOOLPY_FLASHFREQ_120M && CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_DTR
             - CONFIG_SPIRAM_SPEED_120M && CONFIG_SPIRAM_MODE_OCT
             - CONFIG_BOOTLOADER_CACHE_32BIT_ADDR_QUAD_FLASH
+            - CONFIG_MBEDTLS_USE_CRYPTO_ROM_IMPL
             - CONFIG_ESP_WIFI_EAP_TLS1_3
             - CONFIG_ESP_WIFI_ENABLE_ROAMING_APP
-            - CONFIG_USB_HOST_EXT_PORT_RESET_ATTEMPTS

README.md

@@ -15,18 +15,17 @@ ESP-IDF is the development framework for Espressif SoCs supported on Windows, Li
 
 The following table shows ESP-IDF support of Espressif SoCs where ![alt text][preview] and ![alt text][supported] denote preview status and support, respectively. The preview support is usually limited in time and intended for beta versions of chips. Please use an ESP-IDF release where the desired SoC is already supported.
 
-|Chip         |          v5.0          |         v5.1           |         v5.2           |         v5.3           |          v5.4           |                                                                     |
-|:----------- | :---------------------:| :--------------------: | :--------------------: | :--------------------: |  :--------------------: |:------------------------------------------------------------------- |
-|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
-|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
-|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
-|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_S3)           |
-|ESP32-C2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32-C2)           |
-|ESP32-C6     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_C6)           |
-|ESP32-H2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_H2)           |
-|ESP32-P4     |                        |                        |                        | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32-P4)           |
-|ESP32-C5     |                        |                        |                        |                        |  ![alt text][preview]   |[Announcement](https://www.espressif.com/en/news/ESP32-C5)           |
-|ESP32-C61    |                        |                        |                        |                        |  ![alt text][preview]   |[Announcement](https://www.espressif.com/en/products/socs/esp32-c61) |
+|Chip         |          v4.4          |          v5.0          |         v5.1           |         v5.2           |         v5.3           |                                                            |
+|:----------- | :---------------------:| :---------------------:| :--------------------: | :--------------------: | :--------------------: | :--------------------------------------------------------- |
+|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
+|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
+|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
+|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_S3) |
+|ESP32-C2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32-C2) |
+|ESP32-C6     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_C6) |
+|ESP32-H2     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_H2) |
+|ESP32-P4     |                        |                        |                        |                        | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32-P4) |
+|ESP32-C5     |                        |                        |                        |                        | ![alt text][preview]   | [Announcement](https://www.espressif.com/en/news/ESP32-C5) |
 
 [supported]: https://img.shields.io/badge/-supported-green "supported"
 [preview]: https://img.shields.io/badge/-preview-orange "preview"

README_CN.md

@@ -15,18 +15,17 @@ ESP-IDF 是乐鑫官方推出的物联网开发框架，支持 Windows、Linux
 
 下表总结了乐鑫芯片在 ESP-IDF 各版本中的支持状态，其中 ![alt text][supported] 代表已支持，![alt text][preview] 代表目前处于预览支持状态。预览支持状态通常有时间限制，而且仅适用于测试版芯片。请确保使用与芯片相匹配的 ESP-IDF 版本。
 
-|芯片         |          v5.0          |          v5.1          |          v5.2          |          v5.3          |          v5.4          |                                                                           |
-|:----------- | :---------------------:| :--------------------: | :--------------------: | :--------------------: | :--------------------: | :------------------------------------------------------------------------ |
-|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
-|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
-|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
-|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_S3)           |
-|ESP32-C2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C2)           |
-|ESP32-C6     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_C6)           |
-|ESP32-H2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_H2)           |
-|ESP32-P4     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-P4)           |
-|ESP32-C5     |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C5)           |
-|ESP32-C61    |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/zh-hans/products/socs/esp32-c61) |
+|芯片         |          v4.4          |          v5.0          |          v5.1          |          v5.2          |          v5.3          |                                                                 |
+|:----------- | :---------------------:| :---------------------:| :--------------------: | :--------------------: | :--------------------: | :-------------------------------------------------------------- |
+|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
+|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
+|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
+|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_S3) |
+|ESP32-C2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C2) |
+|ESP32-C6     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_C6) |
+|ESP32-H2     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_H2) |
+|ESP32-P4     |                        |                        |                        |                        | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/en/news/ESP32-P4)      |
+|ESP32-C5     |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C5) |
 
 [supported]: https://img.shields.io/badge/-%E6%94%AF%E6%8C%81-green "supported"
 [preview]: https://img.shields.io/badge/-%E9%A2%84%E8%A7%88-orange "preview"
@@ -123,7 +122,7 @@ ESP-IDF 中的子模块采用相对路径（[详见 .gitmodules 文件](.gitmodu
 
 * 最新版的文档：https://docs.espressif.com/projects/esp-idf/ ，该文档是由本仓库 [docs 目录](docs) 构建得到。
 
-* [初学者指南：主要概念和资源](https://www.bilibili.com/video/BV1114y1r7du/)
+* [初学者指南：主要概念和资源](https://www.bilibili.com/video/BV1114y1r7du/) 
 
 * 可以前往 [esp32.com 论坛](https://esp32.com/) 提问，挖掘社区资源。
 

ROADMAP.md

@@ -1,123 +0,0 @@
-# ESP-IDF Project Roadmap 2024
-
-This document outlines the goals of ESP-IDF project and is shared for the convenience of our customers. It is important to clarify that this document is not a binding commitment to our customers. Instead, its primary purpose is to offer a clear roadmap and direction for the project's development. By openly sharing this information, we aim to enhance our customers' understanding, promote transparency and ensure alignment with the overarching objectives of the ESP-IDF project.
-
-## Project Overview
-
-### Project Goals
-
-In both minor and major releases, we integrate new chip support to enhance our product range. By expanding the chip matrix, we broaden the scope of our offerings, catering to a wider audience with diverse needs. This proactive approach ensures that our products remain at the forefront of technological advancements, consistently meeting and exceeding customer expectations.
-
-Furthermore, we prioritize bugfix releases for active branches, focusing on improving the stability and performance of products already in production. By addressing bugs promptly, we aim to enhance the overall user experience and provide tangible benefits to customers relying on our solutions. This proactive maintenance strategy reflects our commitment to delivering reliable, high-quality products to our valued customer base.
-
-Below are the main objectives that ESP-IDF project/teams would like to implement in 2024.
-
--   New Chip Support
-
-    -   Add support for ESP32-P4
-    -   Add support for ESP32-C5
-    -   Add support for ESP32-C61
-
--   More Minor Releases
-
-    -   Release IDF v5.3 in 2024
-    -   Release IDF v5.4 at the start of 2025
-
--   More Bugfix Releases
-
-    -   Release v4.4.8 for IDF v4.4 before ESP-IDF v4.4 goes End of Life in July 2024
-    -   Do more bugfix releases for IDF v5.1 before release/5.1 enters maintenance period in June 2024
-    -   Do more bug fixes releases for release/5.2 and release/5.3, and push the two releases to be more stable and production-ready
-
--   Updates of Libraries
-
-    -   Update GDB to 14.2
-    -   Update LLVM to 18.1.2
-    -   Update MbedTLS to 3.6 (LTS)
-    -   Update LWIP to 2.2.0
-    -   Change minimal Python requirement to 3.9
-
-Please note that support status of previous silicones could be found on [ESP-IDF Release and SoC Compatibility](https://github.com/espressif/esp-idf#esp-idf-release-and-soc-compatibility).
-
-### Roadmap Details
-
-The ESP-IDF project prioritizes consistent maintenance and updates to ensure our customers remain at the forefront of technological advancements. Our commitment to ongoing development ensures that customers continuously benefit from the latest innovations in the field.
-
-Moreover, we are dedicated to empowering our customers to leverage newly implemented features and enhanced functionalities through iterative improvements. Our steadfast commitment to pushing boundaries ensures that clients not only keep pace with evolving technology but also extract optimal value from the cutting-edge capabilities of our products.
-
-Below are the main roadmap details for functional areas inside ESP-IDF.
-
--   New Chip Support
-
-    -   Add full support for ESP32-P4 in ESP-IDF v5.3, refer to [ESP32-P4 Support Status](https://github.com/espressif/esp-idf/issues/12996)
-    -   Add preview support for ESP32-C5 in ESP-IDF v5.3 and full support for ESP32-C5 in ESP-IDF v5.4, refer to [ESP32-C5 Support Status](https://github.com/espressif/esp-idf/issues/14021)
-    -   Add preview support for the early samples of ESP32-C61 in ESP-IDF v5.4 and full support for mass production version in ESP-IDF v5.4.x. Refer to [ESP32-C61 Support Status](https://developer.espressif.com/pages/chip-support-status/esp32c61/#esp-idf)
-
--   Bugfix releases
-
-    -   Do bugfix release IDF v4.4.8 and stop maintaining ESP-IDF v4.4 in July 2024
-    -   Release bugfix IDF v5.0.6 and IDF v5.0.7 in 2024 (maintenance period)
-    -   Release bugfix IDF v5.1.3 and IDF v5.1.4 in H1 of 2024, and release IDF v5.1.5 in H2 of 2024
-    -   Push release/5.1 to maintenance period from June 2024
-    -   Do more bug fixes releases for release/5.2 (IDF v5.2.1, IDF v5.2.2, IDF v5.2.3) and release/5.3 (IDF v5.3.1, IDF v5.3.2), and push releases to be more stable and more production-ready
-
-## ESP-IDF Planning information
-
-For the full list of ESP-IDF releases, please visit https://github.com/espressif/esp-idf/releases
-
-### ESP-IDF Major Releases
-
-No Major Releases planned
-
-### ESP-IDF Minor Releases
-
-#### Quarter One
-
--   v5.2-RC1, estimate release date: 2024/02/02
--   v5.2 final release, estimate release date: 2024/02/08
-
-#### Quarter Two
-
--   v5.3-beta1, estimate release date:: 2024/05/13
--   v5.3-beta2, estimate release date:: 2024/05/31
--   v5.3-RC1, estimate release date:: 2024/07/08
-
-#### Quarter Three
-
--   v5.3-RC2, estimate release date:: 2024/07/26
--   v5.3 final release, estimate release date:: 2024/08/02
-
-#### Quarter Four
-
--   v5.4-beta1, estimate release date:: 2024/11/08
--   v5.4-beta2, estimate release date:: 2024/11/29
--   v5.4-RC1, estimate release date:: 2025/01/09
--   v5.4-RC2, estimate release date:: 2025/01/29
--   v5.4 final release, estimate release date: 2025/02/05
-
-### ESP-IDF Bugfix Releases
-
-#### Quarter One
-
--   v5.1.3, estimate release date: 2024/02/08
--   v5.0.6, estimate release date: 2024/02/18
--   v4.4.7, estimate release date:: 2024/03/19
--   v5.2.1, estimate release date:: 2024/03/31
-
-#### Quarter Two
-
--   v5.1.4, estimate release date:: 2024/05/06
--   v5.2.2, estimate release date:: 2024/06/17
--   v4.4.8, estimate release date:: 2024/07/19
-
-#### Quarter Three
-
--   v5.0.7, estimate release date: 2024/08/22
--   v5.3.1, estimate release date: 2024/09/16
--   v5.2.3, estimate release date: 2024/10/10
-
-#### Quarter Four
-
--   v5.1.5, estimate release date: 2024/11/04  (Maintenance period since June 2024)
--   v5.3.2, estimate release date: 2024/12/31
--   v5.2.4, estimate release date: 2025/02/20 (Service period ends Feb. 2025)

ROADMAP_CN.md

@@ -1,123 +0,0 @@
-# ESP-IDF 项目路线图 2024 (v1.0)
-
-本文档概述了 ESP-IDF 项目的年度计划，方便客户据此规划自己的项目周期。需要说明的是该文档并不是我们对客户的约束性承诺。相反，其主要目的是为客户提供 ESP-IDF 项目开发的路线图和方向。通过公开这些信息，我们希望增进客户对 ESP-IDF 项目的理解，提高透明度，并确保与 ESP-IDF 项目的总体目标保持一致。
-
-## 项目总览
-
-### 项目目标
-
-在 ESP-IDF 的主要版本和次要版本中，我们一般会增加对新芯片的支持，以扩展我们的产品线。通过扩展芯片矩阵，拓宽我们的产品范围，并满足广泛受众的各种需求。这样便能保证我们的产品始终处于技术进步的前沿，不断满足客户的需求并超越客户的期望。
-
-此外，ESP-IDF 各活跃分支的 Bugfix 版本发布也是我们项目的重中之重，着力提升已量产产品的稳定性和性能。通过及时解决问题，我们期待提升用户的整体体验，切实惠及使用乐鑫解决方案的客户。通过积极维护 ESP-IDF 的各活跃分支，我们践行了对宝贵的客户群提供可靠、高质量产品的承诺。
-
-以下是 ESP-IDF 项目在 2024 年计划实现的主要目标。
-
-* 新芯片支持
-
-	* 增加对 ESP32-P4 芯片的支持
-	* 增加对 ESP32-C5 芯片的支持
-	* 增加对 ESP32-C61 芯片的支持
-
-* 发布更多的次要版本
-
-	* 在 2024 年发布 IDF v5.3 
-	* 在 2025 年初发布 IDF v5.4
-
-* 发布更多 Bugfix 版本
-
-	* 在 2024 年 7 月底 IDF v4.4 停止维护之前，发布 IDF v4.4.8
-	* 在 2024 年 6 月底，release/5.1 分支进入维护周期之前，发布更多 Bugfix 版本
-	* release/5.2 分支和 release/5.3 分支发布更多 Bugfix 版本，使这两个分支更加稳定和产品化
-
-* 上游库与工具链的更新
-
-	* 将 GDB 升级至 14.2
-	* 将 LLVM 升级至 18.1.2
-	* 更新 MbedTLS 至 3.6（LTS）
-	* 更新 LWIP 至 2.2.0
-	* 将最低 Python 要求更改为 3.9
-
-请注意，获取之前芯片的支持状态，请参阅 [ESP-IDF 发布和 SoC 兼容性](https://github.com/espressif/esp-idf/blob/master/README_CN.md#esp-idf-与乐鑫芯片)。
-
-### 路线图细节
-
-ESP-IDF 项目重视持续维护和更新，确保我们的客户始终处于技术进步的前沿。我们承诺持续进行开发，并将该领域的最新创新成果呈现给客户。
-
-此外，我们也在给客户赋能，客户通过迭代改进便能接触到新开发的功能和更高的性能。我们在突破技术界限方面的坚定承诺，使客户不仅能接触到最新的技术，还能从我们产品的尖端功能中获取最大价值。
-
-以下是 ESP-IDF 路线图的主要信息。
-
-* 新芯片支持
-
-	* 在 ESP-IDF v5.3 中为 ESP32-P4 提供完整支持，参考 [ESP32-P4 支持状态](https://github.com/espressif/esp-idf/issues/12996)
-	* 在 ESP-IDF v5.3 中为 ESP32-C5 提供预览支持，并在 ESP-IDF v5.4 中为 ESP32-C5 提供完整支持，参考 [ESP32-C5 支持状态](https://github.com/espressif/esp-idf/issues/14021)
-	* 在 ESP-IDF v5.4 中增加对 ESP32-C61 早期样品的预览支持，并在 IDF v5.4.x 中增加对 ESP32-C61 量产版本的完整支持，参考 [ESP32-C61 支持状态](https://developer.espressif.com/pages/chip-support-status/esp32c61/#esp-idf)
-
-* Bugfix 版本发布
-
-	* 发布 Bugfix 版本 IDF v4.4.8，并在 2024 年 7 月底停止维护 ESP-IDF v4.4
-	* 2024 年，release/5.0 分支已处于维护周期，发布 IDF v5.0.6 和 IDF v5.0.7
-	* 2024 年上半年发布 Bugfix 版本 IDF v5.1.3 和 IDF v5.1.4，并在 2024 年下半年发布 IDF v5.1.5
-	* 自 2024 年 6 月起，release/5.1 分支进入到维护周期
-	* release/5.2 分支发布更多 Bugfix 版本，包括 IDF v5.2.1、IDF v5.2.2、IDF v5.2.3；release/5.3 分支发布更多 Bugfix 版本，包括 IDF v5.3.1、IDF v5.3.2。通过发布这些 Bugfix 版本，使 release/5.2 分支和 release/5.3 分支更加稳定和产品化。
-
-## ESP-IDF 发布计划
-
-获取 ESP-IDF 的完整发布列表，请访问 https://github.com/espressif/esp-idf/releases
-
-### ESP-IDF 主要版本发布
-
-2024 年，无主要版本发布计划
-
-### ESP-IDF 次要版本发布
-
-#### 第一季度
-
-* v5.2-RC1，预计发布日期：2024/02/02
-* v5.2 正式发布，预计发布日期：2024/02/08
-
-#### 第二季度
-
-* v5.3-beta1，预计发布日期：2024/05/13
-* v5.3-beta2，预计发布日期：2024/05/31
-* v5.3-RC1，预计发布日期：2024/07/08
-
-#### 第三季度
-
-* v5.3-RC2，预计发布日期：2024/07/26
-* v5.3 正式发布，预计发布日期：2024/08/02
-
-#### 第四季度
-
-* v5.4-beta1，预计发布日期：2024/11/08
-* v5.4-beta2，预计发布日期：2024/11/29
-* v5.4-RC1，预计发布日期：2025/01/09
-* v5.4-RC2，预计发布日期：2025/01/29
-* v5.4 正式发布，预计发布日期：2025/02/05
-
-### ESP-IDF Bugfix 版本发布
-
-#### 第一季度
-
-* v5.1.3，预计发布日期：2024/02/08
-* v5.0.6，预计发布日期：2024/02/18
-* v4.4.7，预计发布日期：2024/03/19
-* v5.2.1，预计发布日期：2024/03/31
-
-#### 第二季度
-
-* v5.1.4，预计发布日期：2024/05/06
-* v5.2.2，预计发布日期：2024/06/17
-* v4.4.8，预计发布日期：2024/07/19
-
-#### 第三季度
-
-* v5.0.7，预计发布日期：2024/08/22
-* v5.3.1，预计发布日期：2024/09/16
-* v5.2.3，预计发布日期：2024/10/10
-
-#### 第四季度
-
-* v5.1.5，预计发布日期：2024/11/04（自 2024 年 6 月进入维护周期）
-* v5.3.2，预计发布日期：2024/12/31
-* v5.2.4，预计发布日期：2025/02/20（服务周期截止至 2025 年 2 月）

components/app_trace/Kconfig

@@ -14,7 +14,6 @@ menu "Application Level Tracing"
 
         config APPTRACE_DEST_NONE
             bool "None"
-
     endchoice
 
     config APPTRACE_DEST_UART
@@ -61,7 +60,7 @@ menu "Application Level Tracing"
     endchoice
 
     config APPTRACE_UART_TX_GPIO
-        int "UART TX on GPIO<num>"
+        int "UART TX on GPIO#"
         depends on APPTRACE_DEST_UART_NOUSB
         range 0 46
         default 12 if IDF_TARGET_ESP32
@@ -71,7 +70,7 @@ menu "Application Level Tracing"
             This GPIO is used for UART TX pin.
 
     config APPTRACE_UART_RX_GPIO
-        int "UART RX on GPIO<num>"
+        int "UART RX on GPIO#"
         depends on APPTRACE_DEST_UART_NOUSB
         range 0 46
         default 13 if IDF_TARGET_ESP32
@@ -214,7 +213,7 @@ menu "Application Level Tracing"
             depends on APPTRACE_SV_ENABLE
             default APPTRACE_SV_DEST_JTAG
             help
-                SystemView will transfer data through the defined interface.
+                SystemView witt transfer data trough defined interface.
 
             config APPTRACE_SV_DEST_JTAG
                 bool "Data destination JTAG"

components/app_trace/app_trace.c

@@ -26,6 +26,8 @@
 #define ESP_APPTRACE_MAX_VPRINTF_ARGS 256
 #define ESP_APPTRACE_HOST_BUF_SIZE 256
 
+#define ESP_APPTRACE_PRINT_LOCK 0
+
 const static char *TAG = "esp_apptrace";
 
 /** tracing module internal data */
@@ -88,7 +90,7 @@ void esp_apptrace_down_buffer_config(uint8_t *buf, uint32_t size)
         return;
     }
     // currently down buffer is supported for JTAG interface only
-    // TODO: one more argument should be added to this function to specify HW interface: JTAG, UART0 etc
+    // TODO: one more argument should be added to this function to specify HW inteface: JTAG, UART0 etc
     ch = &s_trace_channels[ESP_APPTRACE_DEST_JTAG];
     if (ch->hw != NULL) {
         if (ch->hw->down_buffer_config != NULL) {

components/app_trace/app_trace_membufs_proto.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2025 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
@@ -148,18 +148,6 @@ static esp_err_t esp_apptrace_membufs_swap_waitus(esp_apptrace_membufs_proto_dat
         if (res != ESP_OK) {
             break;
         }
-#if CONFIG_IDF_TARGET_ESP32S3
-        /*
-        * ESP32S3 has a serious data corruption issue with the transferred data to host.
-        * This delay helps reduce the failure rate by temporarily reducing heavy memory writes
-        * from RTOS-level tracing and giving OpenOCD more time to read trace memory before
-        * the current thread continues execution. While this doesn't completely prevent
-        * memory access from other threads/cores/ISRs, it has shown to significantly improve
-        * reliability when combined with CRC checks in OpenOCD. In practice, this reduces the
-        * number of retries needed to read an entire block without corruption.
-        */
-        esp_rom_delay_us(100);
-#endif
     }
     return res;
 }
@@ -351,7 +339,7 @@ uint8_t *esp_apptrace_membufs_up_buffer_get(esp_apptrace_membufs_proto_data_t *p
 esp_err_t esp_apptrace_membufs_up_buffer_put(esp_apptrace_membufs_proto_data_t *proto, uint8_t *ptr, esp_apptrace_tmo_t *tmo)
 {
     esp_apptrace_membufs_pkt_end(ptr);
-    // TODO: mark block as busy in order not to reuse it for other tracing calls until it is completely written
+    // TODO: mark block as busy in order not to re-use it for other tracing calls until it is completely written
     // TODO: avoid potential situation when all memory is consumed by low prio tasks which can not complete writing due to
     // higher prio tasks and the latter can not allocate buffers at all
     // this is abnormal situation can be detected on host which will receive only uncompleted buffers

components/app_trace/app_trace_util.c

@@ -9,14 +9,12 @@
 #include "esp_app_trace_util.h"
 #include "sdkconfig.h"
 
-#define ESP_APPTRACE_PRINT_LOCK 0
-
 ///////////////////////////////////////////////////////////////////////////////
 ///////////////////////////////// Locks /////////////////////////////////////
 ///////////////////////////////////////////////////////////////////////////////
 
 #if ESP_APPTRACE_PRINT_LOCK
-static esp_apptrace_lock_t s_log_lock = { .mux = portMUX_INITIALIZER_UNLOCKED };
+static esp_apptrace_lock_t s_log_lock = {.irq_stat = 0, .portmux = portMUX_INITIALIZER_UNLOCKED};
 #endif
 
 int esp_apptrace_log_lock(void)
@@ -33,7 +31,7 @@ int esp_apptrace_log_lock(void)
 
 void esp_apptrace_log_unlock(void)
 {
-#if ESP_APPTRACE_PRINT_LOCK
+ #if ESP_APPTRACE_PRINT_LOCK
     esp_apptrace_lock_give(&s_log_lock);
 #endif
 }
@@ -89,7 +87,7 @@ esp_err_t esp_apptrace_lock_give(esp_apptrace_lock_t *lock)
 uint8_t *esp_apptrace_rb_produce(esp_apptrace_rb_t *rb, uint32_t size)
 {
     uint8_t *ptr = rb->data + rb->wr;
-    // check for available space
+    // check for avalable space
     if (rb->rd <= rb->wr) {
         // |?R......W??|
         if (rb->wr + size >= rb->size) {

components/app_trace/include/esp_app_trace_util.h

@@ -174,7 +174,7 @@ void esp_apptrace_log_unlock(void);
 #define ESP_APPTRACE_LOG_LEV( _L_, level, format, ... )   \
     do { \
         if (LOG_LOCAL_LEVEL >= level) { \
-            ESP_APPTRACE_LOG(LOG_FORMAT(_L_, format), esp_log_early_timestamp(), TAG, ##__VA_ARGS__); \
+            ESP_APPTRACE_LOG(LOG_FORMAT(_L_, format), esp_log_early_timestamp(), TAG, LOG_ADDITIONAL_ARGS, ##__VA_ARGS__); \
         } \
     } while(0)
 

components/app_trace/port/riscv/port.c

@@ -57,13 +57,7 @@ static bool esp_apptrace_riscv_host_data_pending(void);
 
 const static char *TAG = "esp_apptrace";
 
-#if SOC_CACHE_INTERNAL_MEM_VIA_L1CACHE
-#define APPTRACE_DRAM_ATTR TCM_DRAM_ATTR
-#else
-#define APPTRACE_DRAM_ATTR
-#endif
-
-static APPTRACE_DRAM_ATTR esp_apptrace_riscv_ctrl_block_t s_tracing_ctrl[CONFIG_FREERTOS_NUMBER_OF_CORES];
+static esp_apptrace_riscv_ctrl_block_t s_tracing_ctrl[CONFIG_FREERTOS_NUMBER_OF_CORES];
 
 esp_apptrace_hw_t *esp_apptrace_jtag_hw_get(void **data)
 {
@@ -98,7 +92,7 @@ esp_apptrace_hw_t *esp_apptrace_jtag_hw_get(void **data)
 }
 
 /* Advertises apptrace control block address to host.
-   This function can be overridden with custom implementation,
+   This function can be overriden with custom implementation,
    e.g. OpenOCD flasher stub use own implementation of it. */
 __attribute__((weak)) int esp_apptrace_advertise_ctrl_block(void *ctrl_block_addr)
 {
@@ -109,7 +103,7 @@ __attribute__((weak)) int esp_apptrace_advertise_ctrl_block(void *ctrl_block_add
 }
 
 /* Returns up buffers config.
-   This function can be overridden with custom implementation,
+   This function can be overriden with custom implementation,
    e.g. OpenOCD flasher stub use own implementation of it. */
 __attribute__((weak)) void esp_apptrace_get_up_buffers(esp_apptrace_mem_block_t mem_blocks_cfg[2])
 {
@@ -171,7 +165,7 @@ static esp_err_t esp_apptrace_riscv_init(esp_apptrace_riscv_data_t *hw_data)
     }
     // notify host about control block address
     int res = esp_apptrace_advertise_ctrl_block(&s_tracing_ctrl[core_id]);
-    assert(res == 0 && "Failed to send config to host!");
+    assert(res == 0 && "Falied to send config to host!");
 
     return ESP_OK;
 }

components/app_trace/port/xtensa/port.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
@@ -12,7 +12,7 @@
 // ======================
 
 // Xtensa has useful feature: TRAX debug module. It allows recording program execution flow at run-time without disturbing CPU.
-// Execution flow data are written to configurable Trace RAM block. Besides accessing Trace RAM itself TRAX module also allows to read/write
+// Exectution flow data are written to configurable Trace RAM block. Besides accessing Trace RAM itself TRAX module also allows to read/write
 // trace memory via its registers by means of JTAG, APB or ERI transactions.
 // ESP32 has two Xtensa cores with separate TRAX modules on them and provides two special memory regions to be used as trace memory.
 // Chip allows muxing access to those trace memory blocks in such a way that while one block is accessed by CPUs another one can be accessed by host
@@ -47,7 +47,7 @@
 // 2. TRAX Registers layout
 // ========================
 
-// This module uses two TRAX HW registers and one Performance Monitor register to communicate with host SW (OpenOCD).
+// This module uses two TRAX HW registers to communicate with host SW (OpenOCD).
 //  - Control register uses TRAX_DELAYCNT as storage. Only lower 24 bits of TRAX_DELAYCNT are writable. Control register has the following bitfields:
 //   | 31..XXXXXX..24 | 23 .(host_connect). 23| 22..(block_id)..15 | 14..(block_len)..0 |
 //    14..0  bits - actual length of user data in trace memory block. Target updates it every time it fills memory block and exposes it to host.
@@ -55,15 +55,9 @@
 //    21..15 bits - trace memory block transfer ID. Block counter. It can overflow. Updated by target, host should not modify it. Actually can be 2 bits;
 //    22     bit  - 'host data present' flag. If set to one there is data from host, otherwise - no host data;
 //    23     bit  - 'host connected' flag. If zero then host is not connected and tracing module works in post-mortem mode, otherwise in streaming mode;
-//  - Status register uses TRAX_TRIGGERPC as storage. If this register is not zero then current CPU is changing TRAX registers and
-//    this register holds address of the instruction which application will execute when it finishes with those registers modifications.
-//    See 'Targets Connection' section for details.
-//  - CRC16 register uses ERI_PERFMON_PM1 as storage. This register is used to store CRC16 checksum of the exposed trace memory block.
-//    The register has the following format:
-//    | 31..16 (CRC indicator) | 15..0 (CRC16 value) |
-//    CRC indicator (0xA55A) is used to distinguish valid CRC values from other data that might be in the register.
-//    CRC16 is calculated over the entire exposed block and is updated every time a block is exposed to the host.
-//    This allows the host to verify data integrity of the received trace data.
+// - Status register uses TRAX_TRIGGERPC as storage. If this register is not zero then current CPU is changing TRAX registers and
+//   this register holds address of the instruction which application will execute when it finishes with those registers modifications.
+//   See 'Targets Connection' setion for details.
 
 // 3. Modes of operation
 // =====================
@@ -133,7 +127,7 @@
 
 // Access to internal module's data is synchronized with custom mutex. Mutex is a wrapper for portMUX_TYPE and uses almost the same sync mechanism as in
 // vPortCPUAcquireMutex/vPortCPUReleaseMutex. The mechanism uses S32C1I Xtensa instruction to implement exclusive access to module's data from tasks and
-// ISRs running on both cores. Also custom mutex allows specifying timeout for locking operation. Locking routine checks underlying mutex in cycle until
+// ISRs running on both cores. Also custom mutex allows specifying timeout for locking operation. Locking routine checks underlaying mutex in cycle until
 // it gets its ownership or timeout expires. The differences of application tracing module's mutex implementation from vPortCPUAcquireMutex/vPortCPUReleaseMutex are:
 // - Support for timeouts.
 // - Local IRQs for CPU which owns the mutex are disabled till the call to unlocking routine. This is made to avoid possible task's prio inversion.
@@ -148,9 +142,9 @@
 
 // Timeout mechanism is based on xthal_get_ccount() routine and supports timeout values in microseconds.
 // There are two situations when task/ISR can be delayed by tracing API call. Timeout mechanism takes into account both conditions:
-// - Trace data are locked by another task/ISR. When waiting on trace data lock.
+// - Trace data are locked by another task/ISR. When wating on trace data lock.
 // - Current TRAX memory input block is full when working in streaming mode (host is connected). When waiting for host to complete previous block reading.
-// When waiting for any of above conditions xthal_get_ccount() is called periodically to calculate time elapsed from trace API routine entry. When elapsed
+// When wating for any of above conditions xthal_get_ccount() is called periodically to calculate time elapsed from trace API routine entry. When elapsed
 // time exceeds specified timeout value operation is canceled and ESP_ERR_TIMEOUT code is returned.
 #include "sdkconfig.h"
 #include "soc/soc.h"
@@ -165,15 +159,11 @@
 #include "esp_log.h"
 #include "esp_app_trace_membufs_proto.h"
 #include "esp_app_trace_port.h"
-#include "esp_rom_crc.h"
 
 // TRAX is disabled, so we use its registers for our own purposes
 // | 31..XXXXXX..24 | 23 .(host_connect). 23 | 22 .(host_data). 22| 21..(block_id)..15 | 14..(block_len)..0 |
 #define ESP_APPTRACE_TRAX_CTRL_REG              ERI_TRAX_DELAYCNT
 #define ESP_APPTRACE_TRAX_STAT_REG              ERI_TRAX_TRIGGERPC
-#define ESP_APPTRACE_TRAX_CRC16_REG             ERI_PERFMON_PM1
-
-#define ESP_APPTRACE_CRC_INDICATOR              (0xA55AU << 16)
 
 #define ESP_APPTRACE_TRAX_BLOCK_LEN_MSK         0x7FFFUL
 #define ESP_APPTRACE_TRAX_BLOCK_LEN(_l_)        ((_l_) & ESP_APPTRACE_TRAX_BLOCK_LEN_MSK)
@@ -508,8 +498,7 @@ static esp_err_t esp_apptrace_trax_buffer_swap_start(uint32_t curr_block_id)
         uint32_t acked_block = ESP_APPTRACE_TRAX_BLOCK_ID_GET(ctrl_reg);
         uint32_t host_to_read = ESP_APPTRACE_TRAX_BLOCK_LEN_GET(ctrl_reg);
         if (host_to_read != 0 || acked_block != (curr_block_id & ESP_APPTRACE_TRAX_BLOCK_ID_MSK)) {
-            ESP_APPTRACE_LOGD("HC[%d]: Can not switch %" PRIx32 " %" PRIu32 " %" PRIx32 " %" PRIx32 "/%" PRIx32,
-                esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
+            ESP_APPTRACE_LOGD("HC[%d]: Can not switch %" PRIx32 " %" PRIu32 " %" PRIx32 " %" PRIx32 "/%" PRIx32, esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
                 curr_block_id & ESP_APPTRACE_TRAX_BLOCK_ID_MSK, curr_block_id);
             res = ESP_ERR_NO_MEM;
             goto _on_err;
@@ -525,14 +514,6 @@ static esp_err_t esp_apptrace_trax_buffer_swap_end(uint32_t new_block_id, uint32
 {
     uint32_t ctrl_reg = eri_read(ESP_APPTRACE_TRAX_CTRL_REG);
     uint32_t host_connected = ESP_APPTRACE_TRAX_HOST_CONNECT & ctrl_reg;
-
-    /* calculate CRC16 of the already switched block */
-    if (prev_block_len > 0) {
-        const uint8_t *prev_block_start = s_trax_blocks[!((new_block_id % 2))];
-        uint16_t crc16 = esp_rom_crc16_le(0, prev_block_start, prev_block_len);
-        eri_write(ESP_APPTRACE_TRAX_CRC16_REG, crc16 | ESP_APPTRACE_CRC_INDICATOR);
-        ESP_APPTRACE_LOGD("CRC16:%x %d @%x", crc16, prev_block_len, prev_block_start);
-    }
     eri_write(ESP_APPTRACE_TRAX_CTRL_REG, ESP_APPTRACE_TRAX_BLOCK_ID(new_block_id) |
               host_connected | ESP_APPTRACE_TRAX_BLOCK_LEN(prev_block_len));
     esp_apptrace_trax_buffer_swap_unlock();

components/app_trace/sys_view/SEGGER/sbom.yml

@@ -1,6 +0,0 @@
-name: 'SystemView'
-version: '3.42'
-cpe: cpe:2.3:a:segger:systemview:{}:*:*:*:*:*:*:*
-supplier: 'Organization: Espressif Systems (Shanghai) CO LTD'
-originator: 'Organization: SEGGER Microcontroller GmbH'
-description: Real-time recording and visualization tool for embedded systems.

components/app_trace/sys_view/Sample/FreeRTOSV10.4/Config/esp/SEGGER_SYSVIEW_Config_FreeRTOS.c

@@ -3,7 +3,7 @@
  *
  * SPDX-License-Identifier: BSD-1-Clause
  *
- * SPDX-FileContributor: 2017-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileContributor: 2017-2022 Espressif Systems (Shanghai) CO LTD
  */
 /*********************************************************************
 *                    SEGGER Microcontroller GmbH                     *
@@ -58,7 +58,6 @@ File    : SEGGER_SYSVIEW_Config_FreeRTOS.c
 Purpose : Sample setup configuration of SystemView with FreeRTOS.
 Revision: $Rev: 7745 $
 */
-#include <string.h>
 #include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "SEGGER_SYSVIEW.h"
@@ -157,16 +156,15 @@ static esp_apptrace_lock_t s_sys_view_lock = {.mux = portMUX_INITIALIZER_UNLOCKE
 *    Sends SystemView description strings.
 */
 static void _cbSendSystemDesc(void) {
-    char irq_str[32] = "I#";
+    char irq_str[32];
     SEGGER_SYSVIEW_SendSysDesc("N="SYSVIEW_APP_NAME",D="SYSVIEW_DEVICE_NAME",C="SYSVIEW_CORE_NAME",O=FreeRTOS");
-    strcat(itoa(SYSTICK_INTR_ID, irq_str + 2, 10), "=SysTick");
+    snprintf(irq_str, sizeof(irq_str), "I#%d=SysTick", SYSTICK_INTR_ID);
     SEGGER_SYSVIEW_SendSysDesc(irq_str);
     size_t isr_count = sizeof(esp_isr_names)/sizeof(esp_isr_names[0]);
     for (size_t i = 0; i < isr_count; ++i) {
         if (esp_isr_names[i] == NULL || (ETS_INTERNAL_INTR_SOURCE_OFF + i) == SYSTICK_INTR_ID)
             continue;
-        strcat(itoa(ETS_INTERNAL_INTR_SOURCE_OFF + i, irq_str + 2, 10), "=");
-        strncat(irq_str, esp_isr_names[i], sizeof(irq_str) - strlen(irq_str) - 1);
+        snprintf(irq_str, sizeof(irq_str), "I#%d=%s", ETS_INTERNAL_INTR_SOURCE_OFF + i, esp_isr_names[i]);
         SEGGER_SYSVIEW_SendSysDesc(irq_str);
     }
 }

components/app_trace/sys_view/Sample/FreeRTOSV10.4/SEGGER_SYSVIEW_FreeRTOS.c

@@ -108,7 +108,7 @@ static void _cbSendTaskList(void) {
 *    Called from SystemView when asked by the host, returns the
 *    current system time in micro seconds.
 */
-__attribute__((unused)) static U64 _cbGetTime(void) {
+static U64 _cbGetTime(void) {
   U64 Time;
 
   Time = xTaskGetTickCountFromISR();
@@ -260,10 +260,7 @@ void SYSVIEW_SendTaskInfo(U32 TaskID, const char* sName, unsigned Prio, U32 Stac
 */
 // Callbacks provided to SYSTEMVIEW by FreeRTOS
 const SEGGER_SYSVIEW_OS_API SYSVIEW_X_OS_TraceAPI = {
-  /* Callback _cbGetTime locks xKernelLock inside xTaskGetTickCountFromISR, this can cause deadlock on multi-core.
-     To prevent deadlock, always lock xKernelLock before s_sys_view_lock. Omitting the callback here results in sending
-     SYSVIEW_EVTID_SYSTIME_CYCLES events instead of SYSVIEW_EVTID_SYSTIME_US */
-  NULL,
+  _cbGetTime,
   _cbSendTaskList,
 };
 

components/app_trace/sys_view/ext/heap_trace_module.c

@@ -21,7 +21,7 @@ const static char *TAG = "sysview_heap_trace";
 #endif
 
 static SEGGER_SYSVIEW_MODULE s_esp_sysview_heap_module = {
-    .sModule = "M=ESP32 SystemView Heap Tracing Module",
+    .sModule = "ESP32 SystemView Heap Tracing Module",
     .NumEvents = 2,
 };
 

components/app_trace/test_apps/.build-test-rules.yml

@@ -8,6 +8,6 @@ components/app_trace/test_apps:
     - driver
     - esp_hw_support
   disable:
-    - if: IDF_TARGET in ["esp32c5", "esp32c61"]
+    - if: IDF_TARGET == "esp32c5"
       temporary: true
-      reason: not support yet # TODO: [ESP32C5] IDF-8705, [ESP32C61] IDF-9306
+      reason: not support yet # TODO: [ESP32C5] IDF-8705

components/app_update/esp_ota_ops.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -17,7 +17,6 @@
 #include "esp_image_format.h"
 #include "esp_secure_boot.h"
 #include "esp_flash_encrypt.h"
-#include "spi_flash_mmap.h"
 #include "sdkconfig.h"
 
 #include "esp_ota_ops.h"
@@ -41,7 +40,6 @@ typedef struct ota_ops_entry_ {
     bool need_erase;
     uint32_t wrote_size;
     uint8_t partial_bytes;
-    bool ota_resumption;
     WORD_ALIGNED_ATTR uint8_t partial_data[16];
     LIST_ENTRY(ota_ops_entry_) entries;
 } ota_ops_entry_t;
@@ -81,7 +79,7 @@ static const esp_partition_t *read_otadata(esp_ota_select_entry_t *two_otadata)
         return NULL;
     } else {
         memcpy(&two_otadata[0], result, sizeof(esp_ota_select_entry_t));
-        memcpy(&two_otadata[1], result + otadata_partition->erase_size, sizeof(esp_ota_select_entry_t));
+        memcpy(&two_otadata[1], result + SPI_FLASH_SEC_SIZE, sizeof(esp_ota_select_entry_t));
         esp_partition_munmap(ota_data_map);
     }
     return otadata_partition;
@@ -112,22 +110,6 @@ static esp_ota_img_states_t set_new_state_otadata(void)
 #endif
 }
 
-static ota_ops_entry_t* esp_ota_init_entry(const esp_partition_t *partition)
-{
-    ota_ops_entry_t *new_entry = (ota_ops_entry_t *) calloc(1, sizeof(ota_ops_entry_t));
-    if (new_entry == NULL) {
-        return NULL;
-    }
-
-    LIST_INSERT_HEAD(&s_ota_ops_entries_head, new_entry, entries);
-
-    new_entry->part = partition;
-    new_entry->handle = ++s_ota_ops_last_handle;
-
-    return new_entry;
-}
-
-
 esp_err_t esp_ota_begin(const esp_partition_t *partition, size_t image_size, esp_ota_handle_t *out_handle)
 {
     ota_ops_entry_t *new_entry;
@@ -161,19 +143,12 @@ esp_err_t esp_ota_begin(const esp_partition_t *partition, size_t image_size, esp
     }
 #endif
 
-    new_entry = esp_ota_init_entry(partition);
-    if (new_entry == NULL) {
-        return ESP_ERR_NO_MEM;
-    }
-    new_entry->need_erase = (image_size == OTA_WITH_SEQUENTIAL_WRITES);
-    *out_handle = new_entry->handle;
-
     if (image_size != OTA_WITH_SEQUENTIAL_WRITES) {
         // If input image size is 0 or OTA_SIZE_UNKNOWN, erase entire partition
         if ((image_size == 0) || (image_size == OTA_SIZE_UNKNOWN)) {
             ret = esp_partition_erase_range(partition, 0, partition->size);
         } else {
-            const int aligned_erase_size = (image_size + partition->erase_size - 1) & ~(partition->erase_size - 1);
+            const int aligned_erase_size = (image_size + SPI_FLASH_SEC_SIZE - 1) & ~(SPI_FLASH_SEC_SIZE - 1);
             ret = esp_partition_erase_range(partition, 0, aligned_erase_size);
         }
         if (ret != ESP_OK) {
@@ -181,44 +156,16 @@ esp_err_t esp_ota_begin(const esp_partition_t *partition, size_t image_size, esp
         }
     }
 
-    return ESP_OK;
-}
-
-esp_err_t esp_ota_resume(const esp_partition_t *partition, const size_t erase_size, const size_t image_offset, esp_ota_handle_t *out_handle)
-{
-    ota_ops_entry_t *new_entry;
-
-    if ((partition == NULL) || (out_handle == NULL)) {
-        return ESP_ERR_INVALID_ARG;
-    }
-
-    if (image_offset > partition->size) {
-        return ESP_ERR_INVALID_ARG;
-    }
-
-    partition = esp_partition_verify(partition);
-    if (partition == NULL) {
-        return ESP_ERR_NOT_FOUND;
-    }
-
-    // The staging partition cannot be of type Factory, but the final partition can be.
-    if (!is_ota_partition(partition)) {
-        return ESP_ERR_INVALID_ARG;
-    }
-
-    const esp_partition_t* running_partition = esp_ota_get_running_partition();
-    if (partition == running_partition) {
-        return ESP_ERR_OTA_PARTITION_CONFLICT;
-    }
-
-    new_entry = esp_ota_init_entry(partition);
+    new_entry = (ota_ops_entry_t *) calloc(sizeof(ota_ops_entry_t), 1);
     if (new_entry == NULL) {
         return ESP_ERR_NO_MEM;
     }
 
-    new_entry->ota_resumption = true;
-    new_entry->wrote_size = image_offset;
-    new_entry->need_erase = (erase_size == OTA_WITH_SEQUENTIAL_WRITES);
+    LIST_INSERT_HEAD(&s_ota_ops_entries_head, new_entry, entries);
+
+    new_entry->part = partition;
+    new_entry->handle = ++s_ota_ops_last_handle;
+    new_entry->need_erase = (image_size == OTA_WITH_SEQUENTIAL_WRITES);
     *out_handle = new_entry->handle;
     return ESP_OK;
 }
@@ -244,14 +191,14 @@ esp_err_t esp_ota_write(esp_ota_handle_t handle, const void *data, size_t size)
         if (it->handle == handle) {
             if (it->need_erase) {
                 // must erase the partition before writing to it
-                uint32_t first_sector = it->wrote_size / it->part->erase_size; // first affected sector
-                uint32_t last_sector = (it->wrote_size + size - 1) / it->part->erase_size; // last affected sector
+                uint32_t first_sector = it->wrote_size / SPI_FLASH_SEC_SIZE; // first affected sector
+                uint32_t last_sector = (it->wrote_size + size - 1) / SPI_FLASH_SEC_SIZE; // last affected sector
 
                 ret = ESP_OK;
-                if ((it->wrote_size % it->part->erase_size) == 0) {
-                    ret = esp_partition_erase_range(it->part, it->wrote_size, ((last_sector - first_sector) + 1) * it->part->erase_size);
+                if ((it->wrote_size % SPI_FLASH_SEC_SIZE) == 0) {
+                    ret = esp_partition_erase_range(it->part, it->wrote_size, ((last_sector - first_sector) + 1) * SPI_FLASH_SEC_SIZE);
                 } else if (first_sector != last_sector) {
-                    ret = esp_partition_erase_range(it->part, (first_sector + 1) * it->part->erase_size, (last_sector - first_sector) * it->part->erase_size);
+                    ret = esp_partition_erase_range(it->part, (first_sector + 1) * SPI_FLASH_SEC_SIZE, (last_sector - first_sector) * SPI_FLASH_SEC_SIZE);
                 }
                 if (ret != ESP_OK) {
                     return ret;
@@ -421,11 +368,11 @@ static esp_err_t rewrite_ota_seq(esp_ota_select_entry_t *two_otadata, uint32_t s
 
     two_otadata[sec_id].ota_seq = seq;
     two_otadata[sec_id].crc = bootloader_common_ota_select_crc(&two_otadata[sec_id]);
-    esp_err_t ret = esp_partition_erase_range(ota_data_partition, sec_id * ota_data_partition->erase_size, ota_data_partition->erase_size);
+    esp_err_t ret = esp_partition_erase_range(ota_data_partition, sec_id * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
     if (ret != ESP_OK) {
         return ret;
     } else {
-        return esp_partition_write(ota_data_partition, ota_data_partition->erase_size * sec_id, &two_otadata[sec_id], sizeof(esp_ota_select_entry_t));
+        return esp_partition_write(ota_data_partition, SPI_FLASH_SEC_SIZE * sec_id, &two_otadata[sec_id], sizeof(esp_ota_select_entry_t));
     }
 }
 
@@ -958,7 +905,7 @@ esp_err_t esp_ota_erase_last_boot_app_partition(void)
     }
 
     int sec_id = inactive_otadata;
-    err = esp_partition_erase_range(ota_data_partition, sec_id * ota_data_partition->erase_size, ota_data_partition->erase_size);
+    err = esp_partition_erase_range(ota_data_partition, sec_id * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
     if (err != ESP_OK) {
         return err;
     }

components/app_update/include/esp_ota_ops.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -99,32 +99,6 @@ int esp_ota_get_app_elf_sha256(char* dst, size_t size) __attribute__((deprecated
  */
 esp_err_t esp_ota_begin(const esp_partition_t* partition, size_t image_size, esp_ota_handle_t* out_handle);
 
-/**
- * @brief   Resume an interrupted OTA update by continuing to write to the specified partition.
- *
- * This function is used when an OTA update was previously started and needs to be resumed after an interruption.
- * It continues the OTA process from the specified offset within the partition.
- *
- * Unlike esp_ota_begin(), this function does not erase the partition which receives the OTA update, but rather expects that part of the image
- * has already been written correctly, and it resumes writing from the given offset.
- *
- * @param partition Pointer to info for the partition which is receiving the OTA update. Required.
- * @param erase_size Specifies how much flash memory to erase before resuming OTA, depending on whether a sequential write or a bulk erase is being used.
- * @param image_offset Offset from where to resume the OTA process. Should be set to the number of bytes already written.
- * @param out_handle On success, returns a handle that should be used for subsequent esp_ota_write() and esp_ota_end() calls.
- *
- * @return
- *    - ESP_OK: OTA operation resumed successfully.
- *    - ESP_ERR_INVALID_ARG: partition, out_handle were NULL or image_offset arguments is negative, or partition doesn't point to an OTA app partition.
- *    - ESP_ERR_NO_MEM: Cannot allocate memory for OTA operation.
- *    - ESP_ERR_OTA_PARTITION_CONFLICT: Partition holds the currently running firmware, cannot update in place.
- *    - ESP_ERR_NOT_FOUND: Partition argument not found in partition table.
- *    - ESP_ERR_OTA_SELECT_INFO_INVALID: The OTA data partition contains invalid data.
- *    - ESP_ERR_INVALID_SIZE: Partition doesn't fit in configured flash size.
- *    - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
- */
-esp_err_t esp_ota_resume(const esp_partition_t *partition, const size_t erase_size, const size_t image_offset, esp_ota_handle_t *out_handle);
-
 /**
  * @brief   Write OTA update data to partition
  *
@@ -142,8 +116,6 @@ esp_err_t esp_ota_resume(const esp_partition_t *partition, const size_t erase_si
  *    - ESP_ERR_OTA_VALIDATE_FAILED: First byte of image contains invalid app image magic byte.
  *    - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
  *    - ESP_ERR_OTA_SELECT_INFO_INVALID: OTA data partition has invalid contents
- *    - ESP_ERR_INVALID_SIZE: if write would go out of bounds of the partition
- *    - or one of error codes from lower-level flash driver.
  */
 esp_err_t esp_ota_write(esp_ota_handle_t handle, const void* data, size_t size);
 

components/app_update/test_apps/.build-test-rules.yml

@@ -0,0 +1,7 @@
+# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
+
+components/app_update/test_apps:
+  disable:
+    - if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4", "esp32c5"]
+      temporary: true
+      reason: target esp32c6, esp32h2, esp32p4, esp32c5 is not supported yet # TODO: IDF-8068, [ESP32C5] IDF-8638

components/app_update/test_apps/README.md

@@ -0,0 +1,2 @@
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- |

components/app_update/test_apps/main/CMakeLists.txt

@@ -0,0 +1,4 @@
+idf_component_register(SRC_DIRS "."
+                       PRIV_INCLUDE_DIRS "."
+                       PRIV_REQUIRES cmock test_utils app_update bootloader_support nvs_flash driver spi_flash
+                      WHOLE_ARCHIVE)

components/app_update/test_apps/main/test_ota_ops.c

@@ -6,7 +6,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include "esp_log.h"
 #include <freertos/FreeRTOS.h>
 #include <freertos/task.h>
 #include <freertos/semphr.h>
@@ -114,11 +113,3 @@ TEST_CASE("esp_ota_get_partition_description", "[ota]")
     };
     TEST_ESP_ERR(ESP_ERR_NOT_FOUND, bootloader_common_get_partition_description(&not_app_pos, &app_desc1));
 }
-
-TEST_CASE("esp_ota_get_running_partition points to correct address", "[spi_flash]")
-{
-    const esp_partition_t *factory = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_ANY, "factory");
-    const esp_partition_t* part = esp_ota_get_running_partition();
-    ESP_LOGI("running bin", "0x%p", (void*)part->address);
-    TEST_ASSERT_EQUAL_HEX32(factory->address, part->address);
-}

components/app_update/test_apps/main/test_switch_ota.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -101,6 +101,24 @@ static void copy_app_partition_with_offset(esp_ota_handle_t update_handle, const
     ESP_LOGI(TAG, "finish the copy process");
 }
 
+#if defined(CONFIG_BOOTLOADER_FACTORY_RESET) || defined(CONFIG_BOOTLOADER_APP_TEST)
+/* @brief Copies partition from source partition to destination partition.
+ *
+ * Partitions can be of any types and subtypes.
+ * @param[in] dst_partition - Destination partition
+ * @param[in] src_partition - Source partition
+ */
+static void copy_partition(const esp_partition_t *dst_partition, const esp_partition_t *src_partition)
+{
+    const void *partition_bin = NULL;
+    esp_partition_mmap_handle_t data_map;
+    TEST_ESP_OK(esp_partition_mmap(src_partition, 0, src_partition->size, ESP_PARTITION_MMAP_DATA, &partition_bin, &data_map));
+    TEST_ESP_OK(esp_partition_erase_range(dst_partition, 0, dst_partition->size));
+    TEST_ESP_OK(esp_partition_write(dst_partition, 0, (const void *)partition_bin, dst_partition->size));
+    esp_partition_munmap(data_map);
+}
+#endif
+
 /* @brief Get the next partition of OTA for the update.
  *
  * @return The next partition of OTA(OTA0-15).
@@ -159,7 +177,7 @@ static void erase_ota_data(void)
 {
     const esp_partition_t *data_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
     TEST_ASSERT_NOT_EQUAL(NULL, data_partition);
-    TEST_ESP_OK(esp_partition_erase_range(data_partition, 0, 2 * data_partition->erase_size));
+    TEST_ESP_OK(esp_partition_erase_range(data_partition, 0, 2 * SPI_FLASH_SEC_SIZE));
 }
 
 /* @brief Reboots ESP using mode deep sleep. This mode guaranty that RTC_DATA_ATTR variables is not reset.
@@ -233,7 +251,7 @@ static void get_ota_data(const esp_partition_t *otadata_partition, esp_ota_selec
         TEST_ASSERT_NOT_EQUAL(NULL, ota_select_map);
 
         memcpy(ota_data_0, ota_select_map, sizeof(esp_ota_select_entry_t));
-        memcpy(ota_data_1, (uint8_t *)ota_select_map + otadata_partition->erase_size, sizeof(esp_ota_select_entry_t));
+        memcpy(ota_data_1, (uint8_t *)ota_select_map + SPI_FLASH_SEC_SIZE, sizeof(esp_ota_select_entry_t));
         bootloader_munmap(ota_select_map);
     }
 }
@@ -246,7 +264,7 @@ static void get_ota_data(const esp_partition_t *otadata_partition, esp_ota_selec
  */
 static void write_ota_data(const esp_partition_t *otadata_partition, esp_ota_select_entry_t *ota_data, int sec_id)
 {
-    esp_partition_write(otadata_partition, otadata_partition->erase_size * sec_id, &ota_data[sec_id], sizeof(esp_ota_select_entry_t));
+    esp_partition_write(otadata_partition, SPI_FLASH_SEC_SIZE * sec_id, &ota_data[sec_id], sizeof(esp_ota_select_entry_t));
 }
 
 /* @brief Makes a corrupt of ota_data.
@@ -512,7 +530,7 @@ static void test_flow5(void)
             ESP_LOGI(TAG, "Factory");
             TEST_ASSERT_EQUAL(ESP_PARTITION_SUBTYPE_APP_FACTORY, cur_app->subtype);
             set_output_pin(CONFIG_BOOTLOADER_NUM_PIN_APP_TEST);
-            esp_partition_copy(esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_TEST, NULL), 0, cur_app, 0, cur_app->size);
+            copy_partition(esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_TEST, NULL), cur_app);
             esp_restart();
             break;
         case 3:
@@ -823,7 +841,8 @@ static void test_flow6(void)
 // 3 Stage: run OTA0    -> check it -> erase OTA_DATA for next tests    -> PASS
 TEST_CASE_MULTIPLE_STAGES("Switching between factory, OTA0 using esp_ota_write_with_offset", "[app_update][timeout=90][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET]", start_test, test_flow6, test_flow6);
 
-TEST_CASE("Test bootloader_common_get_sha256_of_partition returns ESP_ERR_IMAGE_INVALID when image is invalid", "[partitions]")
+//IDF-5145
+TEST_CASE("Test bootloader_common_get_sha256_of_partition returns ESP_ERR_IMAGE_INVALID when image is ivalid", "[partitions]")
 {
     const esp_partition_t *cur_app = esp_ota_get_running_partition();
     ESP_LOGI(TAG, "copy current app to next part");

components/app_update/test_apps/partition_table_unit_test_two_ota.csv

@@ -7,3 +7,5 @@ factory,    0,    0,       ,        0xB0000
 ota_0,      0,    ota_0,   ,        0xB0000
 ota_1,      0,    ota_1,   ,        0xB0000
 test,       0,    test,    ,        0xB0000
+# flash_test partition used for SPI flash tests, WL FAT tests, and SPIFFS tests
+flash_test, data, fat,     ,        528K

components/app_update/test_apps/partition_table_unit_test_two_ota_2m.csv

@@ -7,3 +7,5 @@ factory,    0,    0,       ,        0x70000
 ota_0,      0,    ota_0,   ,        0x70000
 ota_1,      0,    ota_1,   ,        0x70000
 test,       0,    test,    ,        0x70000
+# flash_test partition used for SPI flash tests, WL FAT tests, and SPIFFS tests
+flash_test, data, fat,     ,        128K

components/app_update/test_apps/pytest_app_update_ut.py

@@ -0,0 +1,32 @@
+# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+# SPDX-License-Identifier: Unlicense OR CC0-1.0
+import re
+
+import pytest
+from pytest_embedded import Dut
+
+DEFAULT_TIMEOUT = 20
+TEST_SUBMENU_PATTERN_PYTEST = re.compile(rb'\s+\((\d+)\)\s+"([^"]+)"\r?\n')
+
+
+def run_multiple_stages(dut: Dut, test_case_num: int, stages: int) -> None:
+    for stage in range(1, stages + 1):
+        dut.write(str(test_case_num))
+        dut.expect(TEST_SUBMENU_PATTERN_PYTEST, timeout=DEFAULT_TIMEOUT)
+        dut.write(str(stage))
+        if stage != stages:
+            dut.expect_exact('Press ENTER to see the list of tests.')
+
+
+@pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4'], reason='c6/h2/p4 support TBD')  # TODO: IDF-8959
+@pytest.mark.generic
+def test_app_update(dut: Dut) -> None:
+    extra_data = dut.parse_test_menu()
+    for test_case in extra_data:
+        if test_case.type != 'multi_stage':
+            dut.write(str(test_case.index))
+        else:
+            run_multiple_stages(dut, test_case.index, len(test_case.subcases))
+        dut.expect_unity_test_output(timeout=90)
+        dut.expect_exact("Enter next test, or 'enter' to see menu")

components/app_update/test_apps/sdkconfig.defaults

@@ -0,0 +1,18 @@
+# General options for additional checks
+CONFIG_HEAP_POISONING_COMPREHENSIVE=y
+CONFIG_COMPILER_WARN_WRITE_STRINGS=y
+CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
+CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
+CONFIG_COMPILER_STACK_CHECK_MODE_STRONG=y
+CONFIG_COMPILER_STACK_CHECK=y
+
+CONFIG_ESP_TASK_WDT=n
+
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_two_ota.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_two_ota.csv"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_OFFSET=0x18000
+CONFIG_BOOTLOADER_HOLD_TIME_GPIO=2
+CONFIG_BOOTLOADER_OTA_DATA_ERASE=y

components/app_update/test_apps/sdkconfig.defaults.esp32

@@ -0,0 +1,7 @@
+CONFIG_IDF_TARGET="esp32"
+CONFIG_BOOTLOADER_FACTORY_RESET=y
+CONFIG_BOOTLOADER_APP_TEST=y
+CONFIG_BOOTLOADER_DATA_FACTORY_RESET=""
+CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=32
+CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4
+CONFIG_BOOTLOADER_HOLD_TIME_GPIO=2

components/app_update/test_apps/sdkconfig.defaults.esp32c2

@@ -0,0 +1,5 @@
+CONFIG_IDF_TARGET="esp32c2"
+CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_two_ota_2m.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_two_ota_2m.csv"
+CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18

components/app_update/test_apps/sdkconfig.defaults.esp32c3

@@ -0,0 +1,2 @@
+CONFIG_IDF_TARGET="esp32c3"
+CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18

components/app_update/test_apps/sdkconfig.defaults.esp32s2

@@ -0,0 +1,2 @@
+CONFIG_IDF_TARGET="esp32s2"
+CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18

components/app_update/test_apps/test_app_update/.build-test-rules.yml

@@ -1,12 +0,0 @@
-# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
-
-components/app_update/test_apps:
-  enable:
-    - if: CONFIG_NAME == "defaults" and IDF_TARGET != "linux"
-    - if: CONFIG_NAME == "xip_psram" and IDF_TARGET in ["esp32s2", "esp32s3", "esp32p4"]
-    # S2 doesn't have ROM for flash
-    - if: CONFIG_NAME == "xip_psram_with_rom_impl" and IDF_TARGET in ["esp32s3", "esp32p4"]
-  disable:
-    - if: IDF_TARGET in ["esp32c61"]
-      temporary: true
-      reason: target esp32c61 is not supported yet  # TODO: [ESP32C61] IDF-9245

components/app_update/test_apps/test_app_update/README.md

@@ -1,2 +0,0 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/app_update/test_apps/test_app_update/main/CMakeLists.txt

@@ -1,4 +0,0 @@
-idf_component_register(SRC_DIRS "."
-                       PRIV_INCLUDE_DIRS "."
-                       PRIV_REQUIRES cmock test_utils app_update bootloader_support nvs_flash driver spi_flash esp_psram
-                      WHOLE_ARCHIVE)

components/app_update/test_apps/test_app_update/pytest_app_update_ut.py

@@ -1,52 +0,0 @@
-# SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
-# SPDX-License-Identifier: Unlicense OR CC0-1.0
-import re
-
-import pytest
-from pytest_embedded import Dut
-
-DEFAULT_TIMEOUT = 20
-TEST_SUBMENU_PATTERN_PYTEST = re.compile(rb'\s+\((\d+)\)\s+"([^"]+)"\r?\n')
-
-
-@pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c5'], reason='C5 has not supported deep sleep')  # TODO: [ESP32C5] IDF-8640, IDF-10317
-@pytest.mark.generic
-@pytest.mark.parametrize(
-    'config',
-    [
-        'defaults',
-    ],
-    indirect=True,
-)
-def test_app_update(dut: Dut) -> None:
-    dut.run_all_single_board_cases(timeout=90)
-
-
-@pytest.mark.supported_targets
-# TODO: [ESP32C61] IDF-9245, IDF-10983
-@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='C61 has not supported deep sleep')
-@pytest.mark.generic
-@pytest.mark.parametrize(
-    'config',
-    [
-        'xip_psram',
-    ],
-    indirect=True,
-)
-def test_app_update_xip_psram(dut: Dut) -> None:
-    dut.run_all_single_board_cases(timeout=90)
-
-
-@pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c5'], reason='C5 has not supported deep sleep')  # TODO: [ESP32C5] IDF-8640, IDF-10317
-@pytest.mark.generic
-@pytest.mark.parametrize(
-    'config',
-    [
-        'xip_psram_with_rom_impl',
-    ],
-    indirect=True,
-)
-def test_app_update_xip_psram_rom_impl(dut: Dut) -> None:
-    dut.run_all_single_board_cases(timeout=90)

components/app_update/test_apps/test_app_update/sdkconfig.ci.xip_psram

@@ -1,2 +0,0 @@
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_XIP_FROM_PSRAM=y

components/app_update/test_apps/test_app_update/sdkconfig.ci.xip_psram_with_rom_impl

@@ -1,3 +0,0 @@
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_XIP_FROM_PSRAM=y
-CONFIG_SPI_FLASH_ROM_IMPL=y

components/app_update/test_apps/test_app_update/sdkconfig.defaults

@@ -1,22 +0,0 @@
-# General options for additional checks
-CONFIG_HEAP_POISONING_COMPREHENSIVE=y
-CONFIG_COMPILER_WARN_WRITE_STRINGS=y
-CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
-CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
-CONFIG_COMPILER_STACK_CHECK_MODE_STRONG=y
-CONFIG_COMPILER_STACK_CHECK=y
-
-CONFIG_ESP_TASK_WDT=n
-
-CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_two_ota.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_two_ota.csv"
-
-CONFIG_PARTITION_TABLE_CUSTOM=y
-CONFIG_PARTITION_TABLE_OFFSET=0x18000
-
-CONFIG_BOOTLOADER_FACTORY_RESET=y
-CONFIG_BOOTLOADER_APP_TEST=y
-CONFIG_BOOTLOADER_DATA_FACTORY_RESET=""
-CONFIG_BOOTLOADER_HOLD_TIME_GPIO=2
-CONFIG_BOOTLOADER_OTA_DATA_ERASE=y

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=32
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32c2

@@ -1,6 +0,0 @@
-CONFIG_IDF_TARGET="esp32c2"
-CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_two_ota_2m.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_two_ota_2m.csv"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32c3

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32c3"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32c6

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32c6"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32h2

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32h2"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=22
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32p4

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32p4"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=19

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32s2

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32s2"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/app_update/test_apps/test_app_update/sdkconfig.defaults.esp32s3

@@ -1,3 +0,0 @@
-CONFIG_IDF_TARGET="esp32s3"
-CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=18
-CONFIG_BOOTLOADER_NUM_PIN_FACTORY_RESET=4

components/bootloader/Kconfig.log

@@ -1,34 +0,0 @@
-menu "Log"
-
-    choice BOOTLOADER_LOG_LEVEL
-        bool "Bootloader log verbosity"
-        default BOOTLOADER_LOG_LEVEL_INFO
-        help
-            Specify how much output to see in bootloader logs.
-
-        config BOOTLOADER_LOG_LEVEL_NONE
-            bool "No output"
-        config BOOTLOADER_LOG_LEVEL_ERROR
-            bool "Error"
-        config BOOTLOADER_LOG_LEVEL_WARN
-            bool "Warning"
-        config BOOTLOADER_LOG_LEVEL_INFO
-            bool "Info"
-        config BOOTLOADER_LOG_LEVEL_DEBUG
-            bool "Debug"
-        config BOOTLOADER_LOG_LEVEL_VERBOSE
-            bool "Verbose"
-    endchoice
-
-    config BOOTLOADER_LOG_LEVEL
-        int
-        default 0 if BOOTLOADER_LOG_LEVEL_NONE
-        default 1 if BOOTLOADER_LOG_LEVEL_ERROR
-        default 2 if BOOTLOADER_LOG_LEVEL_WARN
-        default 3 if BOOTLOADER_LOG_LEVEL_INFO
-        default 4 if BOOTLOADER_LOG_LEVEL_DEBUG
-        default 5 if BOOTLOADER_LOG_LEVEL_VERBOSE
-
-    orsource "Kconfig.log.format"
-
-endmenu

components/bootloader/Kconfig.log.format

@@ -1,38 +0,0 @@
-menu "Format"
-
-    config BOOTLOADER_LOG_COLORS
-        bool "Color"
-        default n
-        help
-            Use ANSI terminal colors in log output
-            Enable ANSI terminal color codes.
-            In order to view these, your terminal program must support ANSI color codes.
-
-    choice BOOTLOADER_LOG_TIMESTAMP_SOURCE
-        prompt "Timestamp"
-        default BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS
-        help
-            Choose what sort of timestamp is displayed in the log output:
-
-            - "None" - The log will only contain the actual log messages themselves
-              without any time-related information. Avoiding timestamps can help conserve
-              processing power and memory. It might useful when you
-              perform log analysis or debugging, sometimes it's more straightforward
-              to work with logs that lack timestamps, especially if the time of occurrence
-              is not critical for understanding the issues.
-              "I log_test: info message"
-
-            - "Milliseconds since boot" is calculated from the RTOS tick count multiplied
-              by the tick period. This time will reset after a software reboot.
-              "I (112500) log_test: info message"
-
-        config BOOTLOADER_LOG_TIMESTAMP_SOURCE_NONE
-            bool "None"
-            depends on NO_SYMBOL  # hide it now, turn it on final MR
-
-        config BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS
-            bool "Milliseconds Since Boot"
-
-    endchoice # BOOTLOADER_LOG_TIMESTAMP_SOURCE
-
-endmenu

components/bootloader/Kconfig.projbuild

@@ -20,14 +20,14 @@ menu "Bootloader config"
             This option sets compiler optimization level (gcc -O argument)
             for the bootloader.
 
-            - The default "Size" setting will add the -Os (-Oz with clang) flag to CFLAGS.
+            - The default "Size" setting will add the -0s flag to CFLAGS.
             - The "Debug" setting will add the -Og flag to CFLAGS.
             - The "Performance" setting will add the -O2 flag to CFLAGS.
 
             Note that custom optimization levels may be unsupported.
 
         config BOOTLOADER_COMPILER_OPTIMIZATION_SIZE
-            bool "Size (-Os with GCC, -Oz with Clang)"
+            bool "Size (-Os)"
         config BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG
             bool "Debug (-Og)"
         config BOOTLOADER_COMPILER_OPTIMIZATION_PERF
@@ -38,7 +38,34 @@ menu "Bootloader config"
 
     endchoice
 
-    orsource "Kconfig.log"
+    choice BOOTLOADER_LOG_LEVEL
+        bool "Bootloader log verbosity"
+        default BOOTLOADER_LOG_LEVEL_INFO
+        help
+            Specify how much output to see in bootloader logs.
+
+        config BOOTLOADER_LOG_LEVEL_NONE
+            bool "No output"
+        config BOOTLOADER_LOG_LEVEL_ERROR
+            bool "Error"
+        config BOOTLOADER_LOG_LEVEL_WARN
+            bool "Warning"
+        config BOOTLOADER_LOG_LEVEL_INFO
+            bool "Info"
+        config BOOTLOADER_LOG_LEVEL_DEBUG
+            bool "Debug"
+        config BOOTLOADER_LOG_LEVEL_VERBOSE
+            bool "Verbose"
+    endchoice
+
+    config BOOTLOADER_LOG_LEVEL
+        int
+        default 0 if BOOTLOADER_LOG_LEVEL_NONE
+        default 1 if BOOTLOADER_LOG_LEVEL_ERROR
+        default 2 if BOOTLOADER_LOG_LEVEL_WARN
+        default 3 if BOOTLOADER_LOG_LEVEL_INFO
+        default 4 if BOOTLOADER_LOG_LEVEL_DEBUG
+        default 5 if BOOTLOADER_LOG_LEVEL_VERBOSE
 
     menu "Serial Flash Configurations"
         config BOOTLOADER_SPI_CUSTOM_WP_PIN
@@ -100,15 +127,9 @@ menu "Bootloader config"
             help
                 This is a helper config for 32bits address flash. Invisible for users.
 
-        config BOOTLOADER_FLASH_NEEDS_32BIT_ADDR_QUAD_FLASH
-            bool
-            default y if BOOTLOADER_FLASH_NEEDS_32BIT_FEAT && SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP
-            help
-                This is a helper config for 32bits address quad flash. Invisible for users.
-
         config BOOTLOADER_CACHE_32BIT_ADDR_QUAD_FLASH
             bool "Enable cache access to 32-bit-address (over 16MB) range of SPI Flash (READ DOCS FIRST)"
-            depends on BOOTLOADER_FLASH_NEEDS_32BIT_ADDR_QUAD_FLASH && IDF_EXPERIMENTAL_FEATURES
+            depends on BOOTLOADER_FLASH_NEEDS_32BIT_FEAT && IDF_TARGET_ESP32S3 && IDF_EXPERIMENTAL_FEATURES
             default n
             help
                 Enabling this option allows the CPU to access 32-bit-address flash beyond 16M range.
@@ -145,7 +166,7 @@ menu "Bootloader config"
 
     config BOOTLOADER_FACTORY_RESET
         bool "GPIO triggers factory reset"
-        default n
+        default N
         select BOOTLOADER_RESERVE_RTC_MEM if SOC_RTC_FAST_MEM_SUPPORTED
         help
             Allows to reset the device to factory settings:
@@ -158,23 +179,13 @@ menu "Bootloader config"
         int "Number of the GPIO input for factory reset"
         depends on BOOTLOADER_FACTORY_RESET
         range 0 39 if IDF_TARGET_ESP32
-        range 0 46 if IDF_TARGET_ESP32S2
-        range 0 48 if IDF_TARGET_ESP32S3
-        range 0 20 if IDF_TARGET_ESP32C2
-        range 0 21 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C61
-        range 0 28 if IDF_TARGET_ESP32C5
-        range 0 30 if IDF_TARGET_ESP32C6
-        range 0 27 if IDF_TARGET_ESP32H2
-        range 0 54 if IDF_TARGET_ESP32P4
+        range 0 44 if IDF_TARGET_ESP32S2
         default 4
         help
-            The selected GPIO will be configured as an input with internal pull-up enabled. To trigger a factory
+            The selected GPIO will be configured as an input with internal pull-up enabled (note that on some SoCs.
+            not all pins have an internal pull-up, consult the hardware datasheet for details.) To trigger a factory
             reset, this GPIO must be held high or low (as configured) on startup.
 
-            Note that on some SoCs not all pins have an internal pull-up and certain pins are already
-            used by ROM bootloader as bootstrapping. Refer to the technical reference manual for further
-            details on the selected SoC.
-
     choice BOOTLOADER_FACTORY_RESET_PIN_LEVEL
         bool "Factory reset GPIO level"
         depends on BOOTLOADER_FACTORY_RESET
@@ -210,7 +221,7 @@ menu "Bootloader config"
 
     config BOOTLOADER_APP_TEST
         bool "GPIO triggers boot from test app partition"
-        default n
+        default N
         depends on !BOOTLOADER_APP_ANTI_ROLLBACK
         help
             Allows to run the test app from "TEST" partition.
@@ -220,25 +231,14 @@ menu "Bootloader config"
     config BOOTLOADER_NUM_PIN_APP_TEST
         int "Number of the GPIO input to boot TEST partition"
         depends on BOOTLOADER_APP_TEST
-        range 0 39 if IDF_TARGET_ESP32
-        range 0 46 if IDF_TARGET_ESP32S2
-        range 0 48 if IDF_TARGET_ESP32S3
-        range 0 20 if IDF_TARGET_ESP32C2
-        range 0 21 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C61
-        range 0 28 if IDF_TARGET_ESP32C5
-        range 0 30 if IDF_TARGET_ESP32C6
-        range 0 27 if IDF_TARGET_ESP32H2
-        range 0 54 if IDF_TARGET_ESP32P4
+        range 0 39
         default 18
         help
             The selected GPIO will be configured as an input with internal pull-up enabled.
             To trigger a test app, this GPIO must be pulled low on reset.
             After the GPIO input is deactivated and the device reboots, the old application will boot.
             (factory or OTA[x]).
-
-            Note that on some SoCs not all pins have an internal pull-up and certain pins are already
-            used by ROM bootloader as bootstrapping. Refer to the technical reference manual for further
-            details on the selected SoC.
+            Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
 
     choice BOOTLOADER_APP_TEST_PIN_LEVEL
         bool "App test GPIO level"
@@ -269,8 +269,6 @@ menu "Bootloader config"
             Protects the unmapped memory regions of the entire address space from unintended accesses.
             This will ensure that an exception will be triggered whenever the CPU performs a memory
             operation on unmapped regions of the address space.
-            NOTE: Disabling this config on some targets (ESP32-C6, ESP32-H2, ESP32-C5) would not generate
-            an exception when reading from or writing to 0x0.
 
     config BOOTLOADER_WDT_ENABLE
         bool "Use RTC watchdog in start code"
@@ -383,9 +381,9 @@ menu "Bootloader config"
         # options, allowing to turn on "allow insecure options" and have secure boot with
         # "skip validation when existing deep sleep". Keeping this to avoid a breaking change,
         # but - as noted in help - it invalidates the integrity of Secure Boot checks
-        depends on ((SECURE_BOOT && SECURE_BOOT_INSECURE) || !SECURE_BOOT)
+        depends on SOC_RTC_FAST_MEM_SUPPORTED && ((SECURE_BOOT && SECURE_BOOT_INSECURE) || !SECURE_BOOT)
         default n
-        select BOOTLOADER_RESERVE_RTC_MEM if SOC_RTC_FAST_MEM_SUPPORTED
+        select BOOTLOADER_RESERVE_RTC_MEM
         help
             This option disables the normal validation of an image coming out of
             deep sleep (checksums, SHA256, and signature). This is a trade-off
@@ -784,7 +782,7 @@ menu "Security features"
     config SECURE_BOOT_ENABLE_AGGRESSIVE_KEY_REVOKE
         bool "Enable Aggressive key revoke strategy"
         depends on SECURE_BOOT && SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY
-        default n
+        default N
         help
             If this option is set, ROM bootloader will revoke the public key digest burned in efuse block
             if it fails to verify the signature of software bootloader with it.
@@ -797,37 +795,10 @@ menu "Security features"
             This can lead to permanent bricking of the device, in case all keys are revoked
             because of signature verification failure.
 
-    config SECURE_BOOT_V2_ALLOW_EFUSE_RD_DIS
-        bool "Do not disable the ability to further read protect eFuses"
-        depends on SECURE_BOOT_V2_ENABLED
-        default n
-        help
-            If not set (default, recommended), on first boot the bootloader will burn the WR_DIS_RD_DIS
-            efuse when Secure Boot is enabled. This prevents any more efuses from being read protected.
-
-            If this option is set, it will remain possible to write the EFUSE_RD_DIS efuse field after Secure
-            Boot is enabled. This may allow an attacker to read-protect the BLK2 efuse (for ESP32) and
-            BLOCK4-BLOCK10 (i.e. BLOCK_KEY0-BLOCK_KEY5)(for other chips) holding the secure boot public key digest,
-            causing an immediate denial of service and possibly allowing an additional fault injection attack to
-            bypass the signature protection.
-
-            The option must be set when you need to program any read-protected key type into the efuses,
-            e.g., HMAC, ECDSA etc. after secure boot has already been enabled on the device.
-            Please refer to secure boot V2 documentation guide for more details.
-
-            NOTE: Once a BLOCK is read-protected, the application will read all zeros from that block
-
-            NOTE: If "UART ROM download mode (Permanently disabled (recommended))" or
-            "UART ROM download mode (Permanently switch to Secure mode (recommended))" is set,
-            then it is __NOT__ possible to read/write efuses using espefuse.py utility.
-            However, efuse can be read/written from the application
-
-            Please refer to the Secure Boot V2 documentation guide for more information.
-
     config SECURE_BOOT_FLASH_BOOTLOADER_DEFAULT
         bool "Flash bootloader along with other artifacts when using the default flash command"
         depends on SECURE_BOOT_V2_ENABLED && SECURE_BOOT_BUILD_SIGNED_BINARIES
-        default n
+        default N
         help
             When Secure Boot V2 is enabled, by default the bootloader is not flashed along with other artifacts
             like the application and the partition table images, i.e. bootloader has to be separately flashed
@@ -867,7 +838,7 @@ menu "Security features"
     config SECURE_BOOT_INSECURE
         bool "Allow potentially insecure options"
         depends on SECURE_BOOT
-        default n
+        default N
         help
             You can disable some of the default protections offered by secure boot, in order to enable testing or a
             custom combination of security features.
@@ -878,7 +849,7 @@ menu "Security features"
 
     config SECURE_FLASH_ENC_ENABLED
         bool "Enable flash encryption on boot (READ DOCS FIRST)"
-        default n
+        default N
         select SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE
         help
             If this option is set, flash contents will be encrypted by the bootloader on first boot.
@@ -965,7 +936,7 @@ menu "Security features"
         config SECURE_BOOT_ALLOW_ROM_BASIC
             bool "Leave ROM BASIC Interpreter available on reset"
             depends on (SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT) && IDF_TARGET_ESP32
-            default n
+            default N
             help
                 By default, the BASIC ROM Console starts on reset if no valid bootloader is
                 read from the flash.
@@ -980,7 +951,7 @@ menu "Security features"
             bool "Allow JTAG Debugging"
             depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
             select SECURE_FLASH_SKIP_WRITE_PROTECTION_CACHE if SECURE_FLASH_HAS_WRITE_PROTECTION_CACHE
-            default n
+            default N
             help
                 If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot
                 when either secure boot or flash encryption is enabled.
@@ -1004,10 +975,30 @@ menu "Security features"
                 image to this length. It is generally not recommended to set this option, unless you have a legacy
                 partitioning scheme which doesn't support 64KB aligned partition lengths.
 
+        config SECURE_BOOT_V2_ALLOW_EFUSE_RD_DIS
+            bool "Allow additional read protecting of efuses"
+            depends on SECURE_BOOT_INSECURE && SECURE_BOOT_V2_ENABLED
+            help
+                If not set (default, recommended), on first boot the bootloader will burn the WR_DIS_RD_DIS
+                efuse when Secure Boot is enabled. This prevents any more efuses from being read protected.
+
+                If this option is set, it will remain possible to write the EFUSE_RD_DIS efuse field after Secure
+                Boot is enabled. This may allow an attacker to read-protect the BLK2 efuse (for ESP32) and
+                BLOCK4-BLOCK10 (i.e. BLOCK_KEY0-BLOCK_KEY5)(for other chips) holding the public key digest, causing an
+                immediate denial of service and possibly allowing an additional fault injection attack to
+                bypass the signature protection.
+
+                NOTE: Once a BLOCK is read-protected, the application will read all zeros from that block
+
+                NOTE: If "UART ROM download mode (Permanently disabled (recommended))" or
+                "UART ROM download mode (Permanently switch to Secure mode (recommended))" is set,
+                then it is __NOT__ possible to read/write efuses using espefuse.py utility.
+                However, efuse can be read/written from the application
+
         config SECURE_BOOT_ALLOW_UNUSED_DIGEST_SLOTS
             bool "Leave unused digest slots available (not revoke)"
             depends on SECURE_BOOT_INSECURE && SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS
-            default n
+            default N
             help
                 If not set (default), during startup in the app all unused digest slots will be revoked.
                 To revoke unused slot will be called esp_efuse_set_digest_revoke(num_digest) for each digest.
@@ -1026,7 +1017,7 @@ menu "Security features"
             bool "Leave UART bootloader encryption enabled"
             depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
             select SECURE_FLASH_SKIP_WRITE_PROTECTION_CACHE if SECURE_FLASH_HAS_WRITE_PROTECTION_CACHE
-            default n
+            default N
             help
                 If not set (default), the bootloader will permanently disable UART bootloader encryption access on
                 first boot. If set, the UART bootloader will still be able to access hardware encryption.
@@ -1036,7 +1027,7 @@ menu "Security features"
         config SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC
             bool "Leave UART bootloader decryption enabled"
             depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT && IDF_TARGET_ESP32
-            default n
+            default N
             help
                 If not set (default), the bootloader will permanently disable UART bootloader decryption access on
                 first boot. If set, the UART bootloader will still be able to access hardware decryption.
@@ -1048,7 +1039,7 @@ menu "Security features"
             bool "Leave UART bootloader flash cache enabled"
             depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT && \
                 (IDF_TARGET_ESP32 || SOC_EFUSE_DIS_DOWNLOAD_ICACHE || SOC_EFUSE_DIS_DOWNLOAD_DCACHE) # NOERROR
-            default n
+            default N
             select SECURE_FLASH_SKIP_WRITE_PROTECTION_CACHE if SECURE_FLASH_HAS_WRITE_PROTECTION_CACHE
             help
                 If not set (default), the bootloader will permanently disable UART bootloader flash cache access on
@@ -1059,7 +1050,7 @@ menu "Security features"
         config SECURE_FLASH_REQUIRE_ALREADY_ENABLED
             bool "Require flash encryption to be already enabled"
             depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
-            default n
+            default N
             help
                 If not set (default), and flash encryption is not yet enabled in eFuses, the 2nd stage bootloader
                 will enable flash encryption: generate the flash encryption key and program eFuses.
@@ -1134,44 +1125,6 @@ menu "Security features"
 
             If not set, the app does not care if the flash encryption eFuse bit is set or not.
 
-    config SECURE_FLASH_PSEUDO_ROUND_FUNC
-        bool "Permanently enable XTS-AES's pseudo rounds function"
-        default y
-        depends on SECURE_FLASH_ENCRYPTION_MODE_RELEASE && SOC_FLASH_ENCRYPTION_XTS_AES_SUPPORT_PSEUDO_ROUND
-        help
-            If set (default), the bootloader will permanently enable the XTS-AES peripheral's pseudo rounds function.
-            Note: Enabling this config would burn an efuse.
-
-    choice SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH
-        prompt "Strength of the pseudo rounds function"
-        depends on SECURE_FLASH_PSEUDO_ROUND_FUNC
-        default SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_LOW
-        help
-            The strength of the pseudo rounds functions can be configured to low, medium and high,
-            each denoting the values that would be stored in the efuses field.
-            By default the value to set to low.
-            You can configure the strength of the pseudo rounds functions according to your use cases,
-            for example, increasing the strength would provide higher security but would slow down the
-            flash encryption/decryption operations.
-            For more info regarding the performance impact, please checkout the pseudo round function section of the
-            security guide documentation.
-
-        config SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_LOW
-            bool "Low"
-
-        config SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_MEDIUM
-            bool "Medium"
-
-        config SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_HIGH
-            bool "High"
-    endchoice
-
-    config SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH
-        int
-        default 1 if SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_LOW
-        default 2 if SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_MEDIUM
-        default 3 if SECURE_FLASH_PSEUDO_ROUND_FUNC_STRENGTH_HIGH
-
     config SECURE_ROM_DL_MODE_ENABLED
         bool
         default y if SOC_SUPPORTS_SECURE_DL_MODE && !SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT

components/bootloader/project_include.cmake

@@ -30,6 +30,12 @@ idf_build_get_property(project_dir PROJECT_DIR)
 if(CONFIG_SECURE_SIGNED_APPS)
     add_custom_target(gen_secure_boot_keys)
 
+    if(CONFIG_SECURE_SIGNED_APPS_ECDSA_SCHEME)
+        set(secure_apps_signing_version "1")
+    elseif(CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME OR CONFIG_SECURE_SIGNED_APPS_ECDSA_V2_SCHEME)
+        set(secure_apps_signing_version "2")
+    endif()
+
     if(CONFIG_SECURE_BOOT_V1_ENABLED)
         # Check that the configuration is sane
         if((CONFIG_SECURE_BOOTLOADER_REFLASHABLE AND CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH) OR
@@ -59,10 +65,11 @@ if(CONFIG_SECURE_SIGNED_APPS)
             # If the signing key is not found, create a phony gen_secure_boot_signing_key target that
             # fails the build. fail_at_build_time causes a cmake run next time
             # (to pick up a new signing key if one exists, etc.)
-            if(CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME OR CONFIG_SECURE_SIGNED_APPS_ECDSA_SCHEME)
+            if(CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME)
                 fail_at_build_time(gen_secure_boot_signing_key
                     "Secure Boot Signing Key ${CONFIG_SECURE_BOOT_SIGNING_KEY} does not exist. Generate using:"
-                    "\tidf.py secure-generate-signing-key ${CONFIG_SECURE_BOOT_SIGNING_KEY}")
+                    "\tespsecure.py generate_signing_key --version ${secure_apps_signing_version} \
+                    ${CONFIG_SECURE_BOOT_SIGNING_KEY}")
             else()
                 if(CONFIG_SECURE_BOOT_ECDSA_KEY_LEN_192_BITS)
                     set(scheme "ecdsa192")
@@ -71,7 +78,8 @@ if(CONFIG_SECURE_SIGNED_APPS)
                 endif()
                 fail_at_build_time(gen_secure_boot_signing_key
                     "Secure Boot Signing Key ${CONFIG_SECURE_BOOT_SIGNING_KEY} does not exist. Generate using:"
-                    "\tidf.py secure-generate-signing-key --scheme ${scheme} ${CONFIG_SECURE_BOOT_SIGNING_KEY}")
+                    "\tespsecure.py generate_signing_key --version ${secure_apps_signing_version} \
+                    --scheme ${scheme} ${CONFIG_SECURE_BOOT_SIGNING_KEY}")
             endif()
         else()
             add_custom_target(gen_secure_boot_signing_key)
@@ -116,7 +124,7 @@ idf_build_get_property(sdkconfig SDKCONFIG)
 idf_build_get_property(python PYTHON)
 idf_build_get_property(extra_cmake_args EXTRA_CMAKE_ARGS)
 
-# We cannot pass lists are a parameter to the external project without modifying the ';' separator
+# We cannot pass lists are a parameter to the external project without modifying the ';' spearator
 string(REPLACE ";" "|" BOOTLOADER_IGNORE_EXTRA_COMPONENT "${BOOTLOADER_IGNORE_EXTRA_COMPONENT}")
 
 externalproject_add(bootloader

components/bootloader/subproject/CMakeLists.txt

@@ -58,7 +58,6 @@ foreach(component ${proj_components})
 endforeach()
 
 set(BOOTLOADER_BUILD 1)
-set(NON_OS_BUILD 1)
 include("${IDF_PATH}/tools/cmake/project.cmake")
 set(common_req log esp_rom esp_common esp_hw_support newlib)
 idf_build_set_property(EXTRA_COMPONENT_EXCLUDE_DIRS "${EXTRA_COMPONENT_EXCLUDE_DIRS}")
@@ -67,7 +66,6 @@ idf_build_set_property(__OUTPUT_SDKCONFIG 0)
 project(bootloader)
 
 idf_build_set_property(COMPILE_DEFINITIONS "BOOTLOADER_BUILD=1" APPEND)
-idf_build_set_property(COMPILE_DEFINITIONS "NON_OS_BUILD=1" APPEND)
 idf_build_set_property(COMPILE_OPTIONS "-fno-stack-protector" APPEND)
 
 idf_component_get_property(main_args esptool_py FLASH_ARGS)
@@ -209,7 +207,7 @@ elseif(CONFIG_SECURE_BOOTLOADER_REFLASHABLE)
         COMMAND ${CMAKE_COMMAND} -E echo
             "* After first boot, only re-flashes of this kind (with same key) will be accepted."
         COMMAND ${CMAKE_COMMAND} -E echo
-            "* Not recommended to reuse the same secure boot keyfile on multiple production devices."
+            "* Not recommended to re-use the same secure boot keyfile on multiple production devices."
         DEPENDS gen_secure_bootloader_key gen_bootloader_digest_bin
         VERBATIM)
 elseif(

components/bootloader/subproject/main/CMakeLists.txt

@@ -1,7 +1,13 @@
 idf_component_register(SRCS "bootloader_start.c"
                     REQUIRES bootloader bootloader_support)
 
-set(target_folder "${target}")
+if(CONFIG_IDF_TARGET_ESP32C5_BETA3_VERSION)
+    set(target_folder "esp32c5/beta3")
+elseif(CONFIG_IDF_TARGET_ESP32C5_MP_VERSION)
+    set(target_folder "esp32c5/mp")
+else()
+    set(target_folder "${target}")
+endif()
 
 idf_build_get_property(target IDF_TARGET)
 set(scripts "ld/${target_folder}/bootloader.ld")

components/bootloader/subproject/main/ld/esp32/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -119,7 +119,6 @@ SECTIONS
 
   .dram0.data : ALIGN(0x10)
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -145,7 +144,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /*  C++ constructor and destructor tables, properly ordered:  */
@@ -210,55 +208,12 @@ SECTIONS
    */
   .xt.prop 0 :
   {
-    KEEP (*(.xt.prop .xt.prop.* .gnu.linkonce.prop.*))
+    KEEP (*(.xt.prop .gnu.linkonce.prop.*))
   }
 
   .xt.lit 0 :
   {
-    KEEP (*(.xt.lit .xt.lit.* .gnu.linkonce.p.*))
+    KEEP (*(.xt.lit .gnu.linkonce.p.*))
   }
 
-  .xtensa.info 0: { *(.xtensa.info) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
 }

components/bootloader/subproject/main/ld/esp32c2/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -140,7 +140,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -166,7 +165,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -220,57 +218,6 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
 }
 
 /**

components/bootloader/subproject/main/ld/esp32c3/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -140,7 +140,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -166,7 +165,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -220,58 +218,6 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
 }
 
 

components/bootloader/subproject/main/ld/esp32c5/beta3/bootloader.ld

@@ -0,0 +1,256 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/** Simplified memory map for the bootloader.
+ *  Make sure the bootloader can load into main memory without overwriting itself.
+ *
+ *  TODO: [ESP32C5] IDF-9358 Check this file whether need update for MP ROM
+ *  ESP32-C5 ROM static data usage is as follows:
+ *  - 0x4086b2b8 - 0x4087cbc0: Shared buffers, used in UART/USB/SPI download mode only
+ *  - 0x4087cbc0 - 0x4087ebc0: PRO CPU stack, can be reclaimed as heap after RTOS startup
+ *  - 0x4087ebc0 - 0x40880000: ROM .bss and .data (not easily reclaimable)
+ *
+ *  The 2nd stage bootloader can take space up to the end of ROM shared
+ *  buffers area (0x4087cbc0).
+ */
+
+/* We consider 0x4087cbc0 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
+ * and work out iram_seg and iram_loader_seg addresses from there, backwards.
+ */
+
+/* These lengths can be adjusted, if necessary: */
+bootloader_usable_dram_end = 0x4087cbc0;
+bootloader_stack_overhead = 0x2000; /* For safety margin between bootloader data section and startup stacks */
+bootloader_dram_seg_len = 0x5000;
+bootloader_iram_loader_seg_len = 0x7000;
+bootloader_iram_seg_len = 0x2200;
+
+/* Start of the lower region is determined by region size and the end of the higher region */
+bootloader_dram_seg_end = bootloader_usable_dram_end - bootloader_stack_overhead;
+bootloader_dram_seg_start = bootloader_dram_seg_end - bootloader_dram_seg_len;
+bootloader_iram_loader_seg_start = bootloader_dram_seg_start - bootloader_iram_loader_seg_len;
+bootloader_iram_seg_start = bootloader_iram_loader_seg_start - bootloader_iram_seg_len;
+
+MEMORY
+{
+  iram_seg (RWX) :                  org = bootloader_iram_seg_start, len = bootloader_iram_seg_len
+  iram_loader_seg (RWX) :           org = bootloader_iram_loader_seg_start, len = bootloader_iram_loader_seg_len
+  dram_seg (RW) :                   org = bootloader_dram_seg_start, len = bootloader_dram_seg_len
+}
+
+/* The app may use RAM for static allocations up to the start of iram_loader_seg.
+ * If you have changed something above and this assert fails:
+ * 1. Check what the new value of bootloader_iram_loader_seg start is.
+ * 2. Update the value in this assert.
+ * 3. Update SRAM_DRAM_END in components/esp_system/ld/esp32c5/memory.ld.in to the same value.
+ */
+ASSERT(bootloader_iram_loader_seg_start == 0x4086EBC0, "bootloader_iram_loader_seg_start inconsistent with SRAM_DRAM_END");
+
+/* Default entry point: */
+ENTRY(call_start_cpu0);
+
+SECTIONS
+{
+
+  .iram_loader.text :
+  {
+    . = ALIGN (16);
+    _loader_text_start = ABSOLUTE(.);
+    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
+    *liblog.a:(.literal .text .literal.* .text.*)
+    /* we use either libgcc or compiler-rt, so put similar entries for them here */
+    *libgcc.a:(.literal .text .literal.* .text.*)
+    *libclang_rt.builtins.a:(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_clock_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_common_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_disable .text.bootloader_random_disable)
+    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_enable .text.bootloader_random_enable)
+    *libbootloader_support.a:bootloader_efuse.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_console_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_panic.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_soc.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encryption_secure_features.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_secure_features.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_signatures_bootloader.*(.literal .text .literal.* .text.*)
+    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
+    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
+    *libhal.a:wdt_hal_iram.*(.literal .text .literal.* .text.*)
+    *libhal.a:mmu_hal.*(.literal .text .literal.* .text.*)
+    *libhal.a:cache_hal.*(.literal .text .literal.* .text.*)
+    *libhal.a:efuse_hal.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:rtc_clk.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:rtc_time.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:regi2c_ctrl.*(.literal .text .literal.* .text.*)
+    *libefuse.a:*.*(.literal .text .literal.* .text.*)
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _loader_text_end = ABSOLUTE(.);
+  } > iram_loader_seg
+
+  .iram.text :
+  {
+    . = ALIGN (16);
+    *(.entry.text)
+    *(.init.literal)
+    *(.init)
+  } > iram_seg
+
+
+  /* Shared RAM */
+  .dram0.bss (NOLOAD) :
+  {
+    . = ALIGN (8);
+    _dram_start = ABSOLUTE(.);
+    _bss_start = ABSOLUTE(.);
+    *(.dynsbss)
+    *(.sbss)
+    *(.sbss.*)
+    *(.gnu.linkonce.sb.*)
+    *(.scommon)
+    *(.sbss2)
+    *(.sbss2.*)
+    *(.gnu.linkonce.sb2.*)
+    *(.dynbss)
+    *(.bss)
+    *(.bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN (8);
+    _bss_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .dram0.bootdesc : ALIGN(0x10)
+  {
+    _data_start = ABSOLUTE(.);
+    *(.data_bootloader_desc .data_bootloader_desc.*)               /* Should be the first.  Bootloader version info.        DO NOT PUT ANYTHING BEFORE IT! */
+  } > dram_seg
+
+  .dram0.data :
+  {
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d.*)
+    *(.data1)
+    *(.sdata)
+    *(.sdata.*)
+    *(.gnu.linkonce.s.*)
+    *(.gnu.linkonce.s2.*)
+    *(.jcr)
+    _data_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .dram0.rodata :
+  {
+    _rodata_start = ABSOLUTE(.);
+    *(.rodata)
+    *(.rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.rodata1)
+    *(.sdata2 .sdata2.* .srodata .srodata.*)
+    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
+    *(.xt_except_table)
+    *(.gcc_except_table)
+    *(.gnu.linkonce.e.*)
+    *(.gnu.version_r)
+    *(.eh_frame)
+    . = (. + 3) & ~ 3;
+    /* C++ constructor and destructor tables, properly ordered: */
+    __init_array_start = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __init_array_end = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    /*  C++ exception handlers table:  */
+    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
+    *(.xt_except_desc)
+    *(.gnu.linkonce.h.*)
+    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+    *(.xt_except_desc_end)
+    *(.dynamic)
+    *(.gnu.version_d)
+    _rodata_end = ABSOLUTE(.);
+    /* Literals are also RO data. */
+    _lit4_start = ABSOLUTE(.);
+    *(*.lit4)
+    *(.lit4.*)
+    *(.gnu.linkonce.lit4.*)
+    _lit4_end = ABSOLUTE(.);
+    . = ALIGN(4);
+    _dram_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .iram.text :
+  {
+    _stext = .;
+    _text_start = ABSOLUTE(.);
+    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram .iram.*) /* catch stray IRAM_ATTR */
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+
+    /** CPU will try to prefetch up to 16 bytes of
+      * of instructions. This means that any configuration (e.g. MMU, PMS) must allow
+      * safe access to up to 16 bytes after the last real instruction, add
+      * dummy bytes to ensure this
+      */
+    . += 16;
+
+    _text_end = ABSOLUTE(.);
+    _etext = .;
+  } > iram_seg
+
+}
+
+
+/**
+ *  Appendix: Memory Usage of ROM bootloader
+ *
+ * 0x4086b2b8 ------------------> _dram0_0_start
+ *            |               |
+ *            |               |
+ *            |               |   1. Large buffers that are only used in certain boot modes, see shared_buffers.h
+ *            |               |
+ *            |               |
+ * 0x4087cbc0 ------------------> __stack_sentry
+ *            |               |
+ *            |               |   2. Startup pro cpu stack (freed when IDF app is running)
+ *            |               |
+ * 0x4087ebc0 ------------------> __stack (pro cpu)
+ *            |               |
+ *            |               |
+ *            |               |   3. Shared memory only used in startup code or nonos/early boot*
+ *            |               |      (can be freed when IDF runs)
+ *            |               |
+ *            |               |
+ * 0x4087fb14 ------------------> _dram0_rtos_reserved_start
+ *            |               |
+ *            |               |
+ *            |               |   4. Shared memory used in startup code and when IDF runs
+ *            |               |
+ *            |               |
+ * 0x4087fefc ------------------> _dram0_rtos_reserved_end
+ *            |               |
+ * 0x4087ffb8 ------------------> _data_start_interface
+ *            |               |
+ *            |               |   5. End of DRAM is the 'interface' data with constant addresses (ECO compatible)
+ *            |               |
+ * 0x40880000 ------------------> _data_end_interface
+ */

components/bootloader/subproject/main/ld/esp32c5/bootloader.ld

@@ -1,309 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-/** Simplified memory map for the bootloader.
- *  Make sure the bootloader can load into main memory without overwriting itself.
- *
- *  ESP32-C5 ROM static data usage is as follows:
- *  - 0x4084e9a0 - 0x4085c9a0: Shared buffers, used in UART/USB/SPI download mode only
- *  - 0x4085c9a0 - 0x4085e9a0: PRO CPU stack, can be reclaimed as heap after RTOS startup
- *  - 0x4085e9a0 - 0x40860000: ROM .bss and .data (not easily reclaimable)
- *
- *  The 2nd stage bootloader can take space up to the end of ROM shared
- *  buffers area (0x4085c9a0).
- */
-
-/* We consider 0x4085c9a0 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
- * and work out iram_seg and iram_loader_seg addresses from there, backwards.
- */
-
-/* These lengths can be adjusted, if necessary: */
-bootloader_usable_dram_end = 0x4085c9a0;
-bootloader_stack_overhead = 0x2000; /* For safety margin between bootloader data section and startup stacks */
-bootloader_dram_seg_len = 0x5000;
-bootloader_iram_loader_seg_len = 0x7000;
-bootloader_iram_seg_len = 0x2200;
-
-/* Start of the lower region is determined by region size and the end of the higher region */
-bootloader_dram_seg_end = bootloader_usable_dram_end - bootloader_stack_overhead;
-bootloader_dram_seg_start = bootloader_dram_seg_end - bootloader_dram_seg_len;
-bootloader_iram_loader_seg_start = bootloader_dram_seg_start - bootloader_iram_loader_seg_len;
-bootloader_iram_seg_start = bootloader_iram_loader_seg_start - bootloader_iram_seg_len;
-
-MEMORY
-{
-  iram_seg (RWX) :                  org = bootloader_iram_seg_start, len = bootloader_iram_seg_len
-  iram_loader_seg (RWX) :           org = bootloader_iram_loader_seg_start, len = bootloader_iram_loader_seg_len
-  dram_seg (RW) :                   org = bootloader_dram_seg_start, len = bootloader_dram_seg_len
-}
-
-/* The app may use RAM for static allocations up to the start of iram_loader_seg.
- * If you have changed something above and this assert fails:
- * 1. Check what the new value of bootloader_iram_loader_seg start is.
- * 2. Update the value in this assert.
- * 3. Update SRAM_DRAM_END in components/esp_system/ld/esp32c5/memory.ld.in to the same value.
- */
-ASSERT(bootloader_iram_loader_seg_start == 0x4084E9A0, "bootloader_iram_loader_seg_start inconsistent with SRAM_DRAM_END");
-
-/* Default entry point: */
-ENTRY(call_start_cpu0);
-
-SECTIONS
-{
-
-  .iram_loader.text :
-  {
-    . = ALIGN (16);
-    _loader_text_start = ABSOLUTE(.);
-    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
-    *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
-    *liblog.a:(.literal .text .literal.* .text.*)
-    /* we use either libgcc or compiler-rt, so put similar entries for them here */
-    *libgcc.a:(.literal .text .literal.* .text.*)
-    *libclang_rt.builtins.a:(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_clock_loader.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_common_loader.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_disable .text.bootloader_random_disable)
-    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_enable .text.bootloader_random_enable)
-    *libbootloader_support.a:bootloader_efuse.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_console_loader.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_panic.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:bootloader_soc.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:flash_encryption_secure_features.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:secure_boot_secure_features.*(.literal .text .literal.* .text.*)
-    *libbootloader_support.a:secure_boot_signatures_bootloader.*(.literal .text .literal.* .text.*)
-    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
-    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
-    *libhal.a:wdt_hal_iram.*(.literal .text .literal.* .text.*)
-    *libhal.a:mmu_hal.*(.literal .text .literal.* .text.*)
-    *libhal.a:cache_hal.*(.literal .text .literal.* .text.*)
-    *libhal.a:efuse_hal.*(.literal .text .literal.* .text.*)
-    *libesp_hw_support.a:rtc_clk.*(.literal .text .literal.* .text.*)
-    *libesp_hw_support.a:rtc_time.*(.literal .text .literal.* .text.*)
-    *libesp_hw_support.a:regi2c_ctrl.*(.literal .text .literal.* .text.*)
-    *libefuse.a:*.*(.literal .text .literal.* .text.*)
-    *(.fini.literal)
-    *(.fini)
-    *(.gnu.version)
-    _loader_text_end = ABSOLUTE(.);
-  } > iram_loader_seg
-
-  .iram.text :
-  {
-    . = ALIGN (16);
-    *(.entry.text)
-    *(.init.literal)
-    *(.init)
-  } > iram_seg
-
-
-  /* Shared RAM */
-  .dram0.bss (NOLOAD) :
-  {
-    . = ALIGN (8);
-    _dram_start = ABSOLUTE(.);
-    _bss_start = ABSOLUTE(.);
-    *(.dynsbss)
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-    *(.sbss2)
-    *(.sbss2.*)
-    *(.gnu.linkonce.sb2.*)
-    *(.dynbss)
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN (8);
-    _bss_end = ABSOLUTE(.);
-  } > dram_seg
-
-  .dram0.bootdesc : ALIGN(0x10)
-  {
-    _data_start = ABSOLUTE(.);
-    *(.data_bootloader_desc .data_bootloader_desc.*)               /* Should be the first.  Bootloader version info.        DO NOT PUT ANYTHING BEFORE IT! */
-  } > dram_seg
-
-  .dram0.data :
-  {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    *(.data1)
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-    *(.gnu.linkonce.s2.*)
-    *(.jcr)
-    _data_end = ABSOLUTE(.);
-  } > dram_seg
-
-  .dram0.rodata :
-  {
-    _rodata_start = ABSOLUTE(.);
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-    *(.rodata1)
-    *(.sdata2 .sdata2.* .srodata .srodata.*)
-    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
-    *(.xt_except_table)
-    *(.gcc_except_table)
-    *(.gnu.linkonce.e.*)
-    *(.gnu.version_r)
-    *(.eh_frame_hdr)
-    *(.eh_frame)
-    . = (. + 3) & ~ 3;
-    /* C++ constructor and destructor tables, properly ordered: */
-    __init_array_start = ABSOLUTE(.);
-    KEEP (*crtbegin.*(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    __init_array_end = ABSOLUTE(.);
-    KEEP (*crtbegin.*(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    /*  C++ exception handlers table:  */
-    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
-    *(.xt_except_desc)
-    *(.gnu.linkonce.h.*)
-    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
-    *(.xt_except_desc_end)
-    *(.dynamic)
-    *(.gnu.version_d)
-    _rodata_end = ABSOLUTE(.);
-    /* Literals are also RO data. */
-    _lit4_start = ABSOLUTE(.);
-    *(*.lit4)
-    *(.lit4.*)
-    *(.gnu.linkonce.lit4.*)
-    _lit4_end = ABSOLUTE(.);
-    . = ALIGN(4);
-    _dram_end = ABSOLUTE(.);
-  } > dram_seg
-
-  .iram.text :
-  {
-    _stext = .;
-    _text_start = ABSOLUTE(.);
-    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
-    *(.iram .iram.*) /* catch stray IRAM_ATTR */
-    *(.fini.literal)
-    *(.fini)
-    *(.gnu.version)
-
-    /** CPU will try to prefetch up to 16 bytes of
-      * of instructions. This means that any configuration (e.g. MMU, PMS) must allow
-      * safe access to up to 16 bytes after the last real instruction, add
-      * dummy bytes to ensure this
-      */
-    . += 16;
-
-    _text_end = ABSOLUTE(.);
-    _etext = .;
-  } > iram_seg
-
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
-}
-
-
-/**
- *  Appendix: Memory Usage of ROM bootloader
- *
- * 0x4084e9a0 ------------------> _dram0_0_start
- *            |               |
- *            |               |
- *            |               |   1. Large buffers that are only used in certain boot modes, see shared_buffers.h
- *            |               |
- *            |               |
- * 0x4085c9a0 ------------------> __stack_sentry
- *            |               |
- *            |               |   2. Startup pro cpu stack (freed when IDF app is running)
- *            |               |
- * 0x4085e9a0 ------------------> __stack (pro cpu)
- *            |               |
- *            |               |
- *            |               |   3. Shared memory only used in startup code or nonos/early boot*
- *            |               |      (can be freed when IDF runs)
- *            |               |
- *            |               |
- * 0x4085f500 ------------------> _dram0_rtos_reserved_start
- *            |               |
- *            |               |
- *            |               |   4. Shared memory used in startup code and when IDF runs
- *            |               |
- *            |               |
- * 0x4085fc5c ------------------> _dram0_rtos_reserved_end
- *            |               |
- * 0x4085fc70 ------------------> _data_start_interface
- *            |               |
- *            |               |   5. End of DRAM is the 'interface' data with constant addresses (ECO compatible)
- *            |               |
- * 0x40860000 ------------------> _data_end_interface
- */

components/bootloader/subproject/main/ld/esp32c5/mp/bootloader.ld

@@ -0,0 +1,255 @@
+/*
+ * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/** Simplified memory map for the bootloader.
+ *  Make sure the bootloader can load into main memory without overwriting itself.
+ *
+ *  ESP32-C5 ROM static data usage is as follows:
+ *  - 0x4084e9a0 - 0x4085c9a0: Shared buffers, used in UART/USB/SPI download mode only
+ *  - 0x4085c9a0 - 0x4085e9a0: PRO CPU stack, can be reclaimed as heap after RTOS startup
+ *  - 0x4085e9a0 - 0x40860000: ROM .bss and .data (not easily reclaimable)
+ *
+ *  The 2nd stage bootloader can take space up to the end of ROM shared
+ *  buffers area (0x4085c9a0).
+ */
+
+/* We consider 0x4085c9a0 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
+ * and work out iram_seg and iram_loader_seg addresses from there, backwards.
+ */
+
+/* These lengths can be adjusted, if necessary: */
+bootloader_usable_dram_end = 0x4085c9a0;
+bootloader_stack_overhead = 0x2000; /* For safety margin between bootloader data section and startup stacks */
+bootloader_dram_seg_len = 0x5000;
+bootloader_iram_loader_seg_len = 0x7000;
+bootloader_iram_seg_len = 0x2200;
+
+/* Start of the lower region is determined by region size and the end of the higher region */
+bootloader_dram_seg_end = bootloader_usable_dram_end - bootloader_stack_overhead;
+bootloader_dram_seg_start = bootloader_dram_seg_end - bootloader_dram_seg_len;
+bootloader_iram_loader_seg_start = bootloader_dram_seg_start - bootloader_iram_loader_seg_len;
+bootloader_iram_seg_start = bootloader_iram_loader_seg_start - bootloader_iram_seg_len;
+
+MEMORY
+{
+  iram_seg (RWX) :                  org = bootloader_iram_seg_start, len = bootloader_iram_seg_len
+  iram_loader_seg (RWX) :           org = bootloader_iram_loader_seg_start, len = bootloader_iram_loader_seg_len
+  dram_seg (RW) :                   org = bootloader_dram_seg_start, len = bootloader_dram_seg_len
+}
+
+/* The app may use RAM for static allocations up to the start of iram_loader_seg.
+ * If you have changed something above and this assert fails:
+ * 1. Check what the new value of bootloader_iram_loader_seg start is.
+ * 2. Update the value in this assert.
+ * 3. Update SRAM_DRAM_END in components/esp_system/ld/esp32c5/memory.ld.in to the same value.
+ */
+ASSERT(bootloader_iram_loader_seg_start == 0x4084E9A0, "bootloader_iram_loader_seg_start inconsistent with SRAM_DRAM_END");
+
+/* Default entry point: */
+ENTRY(call_start_cpu0);
+
+SECTIONS
+{
+
+  .iram_loader.text :
+  {
+    . = ALIGN (16);
+    _loader_text_start = ABSOLUTE(.);
+    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
+    *liblog.a:(.literal .text .literal.* .text.*)
+    /* we use either libgcc or compiler-rt, so put similar entries for them here */
+    *libgcc.a:(.literal .text .literal.* .text.*)
+    *libclang_rt.builtins.a:(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_clock_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_common_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_disable .text.bootloader_random_disable)
+    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_enable .text.bootloader_random_enable)
+    *libbootloader_support.a:bootloader_efuse.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_console_loader.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_panic.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:bootloader_soc.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_encryption_secure_features.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_secure_features.*(.literal .text .literal.* .text.*)
+    *libbootloader_support.a:secure_boot_signatures_bootloader.*(.literal .text .literal.* .text.*)
+    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
+    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
+    *libhal.a:wdt_hal_iram.*(.literal .text .literal.* .text.*)
+    *libhal.a:mmu_hal.*(.literal .text .literal.* .text.*)
+    *libhal.a:cache_hal.*(.literal .text .literal.* .text.*)
+    *libhal.a:efuse_hal.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:rtc_clk.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:rtc_time.*(.literal .text .literal.* .text.*)
+    *libesp_hw_support.a:regi2c_ctrl.*(.literal .text .literal.* .text.*)
+    *libefuse.a:*.*(.literal .text .literal.* .text.*)
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+    _loader_text_end = ABSOLUTE(.);
+  } > iram_loader_seg
+
+  .iram.text :
+  {
+    . = ALIGN (16);
+    *(.entry.text)
+    *(.init.literal)
+    *(.init)
+  } > iram_seg
+
+
+  /* Shared RAM */
+  .dram0.bss (NOLOAD) :
+  {
+    . = ALIGN (8);
+    _dram_start = ABSOLUTE(.);
+    _bss_start = ABSOLUTE(.);
+    *(.dynsbss)
+    *(.sbss)
+    *(.sbss.*)
+    *(.gnu.linkonce.sb.*)
+    *(.scommon)
+    *(.sbss2)
+    *(.sbss2.*)
+    *(.gnu.linkonce.sb2.*)
+    *(.dynbss)
+    *(.bss)
+    *(.bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN (8);
+    _bss_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .dram0.bootdesc : ALIGN(0x10)
+  {
+    _data_start = ABSOLUTE(.);
+    *(.data_bootloader_desc .data_bootloader_desc.*)               /* Should be the first.  Bootloader version info.        DO NOT PUT ANYTHING BEFORE IT! */
+  } > dram_seg
+
+  .dram0.data :
+  {
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d.*)
+    *(.data1)
+    *(.sdata)
+    *(.sdata.*)
+    *(.gnu.linkonce.s.*)
+    *(.gnu.linkonce.s2.*)
+    *(.jcr)
+    _data_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .dram0.rodata :
+  {
+    _rodata_start = ABSOLUTE(.);
+    *(.rodata)
+    *(.rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.rodata1)
+    *(.sdata2 .sdata2.* .srodata .srodata.*)
+    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
+    *(.xt_except_table)
+    *(.gcc_except_table)
+    *(.gnu.linkonce.e.*)
+    *(.gnu.version_r)
+    *(.eh_frame)
+    . = (. + 3) & ~ 3;
+    /* C++ constructor and destructor tables, properly ordered: */
+    __init_array_start = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __init_array_end = ABSOLUTE(.);
+    KEEP (*crtbegin.*(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    /*  C++ exception handlers table:  */
+    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
+    *(.xt_except_desc)
+    *(.gnu.linkonce.h.*)
+    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+    *(.xt_except_desc_end)
+    *(.dynamic)
+    *(.gnu.version_d)
+    _rodata_end = ABSOLUTE(.);
+    /* Literals are also RO data. */
+    _lit4_start = ABSOLUTE(.);
+    *(*.lit4)
+    *(.lit4.*)
+    *(.gnu.linkonce.lit4.*)
+    _lit4_end = ABSOLUTE(.);
+    . = ALIGN(4);
+    _dram_end = ABSOLUTE(.);
+  } > dram_seg
+
+  .iram.text :
+  {
+    _stext = .;
+    _text_start = ABSOLUTE(.);
+    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
+    *(.iram .iram.*) /* catch stray IRAM_ATTR */
+    *(.fini.literal)
+    *(.fini)
+    *(.gnu.version)
+
+    /** CPU will try to prefetch up to 16 bytes of
+      * of instructions. This means that any configuration (e.g. MMU, PMS) must allow
+      * safe access to up to 16 bytes after the last real instruction, add
+      * dummy bytes to ensure this
+      */
+    . += 16;
+
+    _text_end = ABSOLUTE(.);
+    _etext = .;
+  } > iram_seg
+
+}
+
+
+/**
+ *  Appendix: Memory Usage of ROM bootloader
+ *
+ * 0x4084e9a0 ------------------> _dram0_0_start
+ *            |               |
+ *            |               |
+ *            |               |   1. Large buffers that are only used in certain boot modes, see shared_buffers.h
+ *            |               |
+ *            |               |
+ * 0x4085c9a0 ------------------> __stack_sentry
+ *            |               |
+ *            |               |   2. Startup pro cpu stack (freed when IDF app is running)
+ *            |               |
+ * 0x4085e9a0 ------------------> __stack (pro cpu)
+ *            |               |
+ *            |               |
+ *            |               |   3. Shared memory only used in startup code or nonos/early boot*
+ *            |               |      (can be freed when IDF runs)
+ *            |               |
+ *            |               |
+ * 0x4085f500 ------------------> _dram0_rtos_reserved_start
+ *            |               |
+ *            |               |
+ *            |               |   4. Shared memory used in startup code and when IDF runs
+ *            |               |
+ *            |               |
+ * 0x4085fc5c ------------------> _dram0_rtos_reserved_end
+ *            |               |
+ * 0x4085fc70 ------------------> _data_start_interface
+ *            |               |
+ *            |               |   5. End of DRAM is the 'interface' data with constant addresses (ECO compatible)
+ *            |               |
+ * 0x40860000 ------------------> _data_end_interface
+ */

components/bootloader/subproject/main/ld/esp32c5/mp/bootloader.rom.ld

@@ -0,0 +1,6 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/* No definition for ESP32-C5 target */

components/bootloader/subproject/main/ld/esp32c6/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -138,7 +138,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -164,7 +163,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -218,58 +216,6 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
 }
 
 

components/bootloader/subproject/main/ld/esp32c61/bootloader.ld

@@ -7,20 +7,20 @@
  *  Make sure the bootloader can load into main memory without overwriting itself.
  *
  *  ESP32-C61 ROM static data usage is as follows:
- *  - 0x4083ea70 - 0x4084ca70: Shared buffers, used in UART/USB/SPI download mode only
- *  - 0x4084ca70 - 0x4084ea70: PRO CPU stack, can be reclaimed as heap after RTOS startup
- *  - 0x4084ea70 - 0x40850000: ROM .bss and .data (not easily reclaimable)
+ *  - 0x4086ad08 - 0x4087c610: Shared buffers, used in UART/USB/SPI download mode only
+ *  - 0x4087c610 - 0x4087e610: PRO CPU stack, can be reclaimed as heap after RTOS startup
+ *  - 0x4087e610 - 0x40880000: ROM .bss and .data (not easily reclaimable)
  *
  *  The 2nd stage bootloader can take space up to the end of ROM shared
- *  buffers area (0x4084ca70).
+ *  buffers area (0x4087c610).
  */
 
-/* We consider 0x4084ca70 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
+/* We consider 0x4087c610 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
  * and work out iram_seg and iram_loader_seg addresses from there, backwards.
  */
 
 /* These lengths can be adjusted, if necessary: */
-bootloader_usable_dram_end = 0x4084ca70;
+bootloader_usable_dram_end = 0x4084c9f0;
 bootloader_stack_overhead = 0x2000; /* For safety margin between bootloader data section and startup stacks */
 bootloader_dram_seg_len = 0x5000;
 bootloader_iram_loader_seg_len = 0x7000;
@@ -45,7 +45,7 @@ MEMORY
  * 2. Update the value in this assert.
  * 3. Update SRAM_DRAM_END in components/esp_system/ld/esp32c61/memory.ld.in to the same value.
  */
-ASSERT(bootloader_iram_loader_seg_start == 0x4083ea70, "bootloader_iram_loader_seg_start inconsistent with SRAM_DRAM_END");
+ASSERT(bootloader_iram_loader_seg_start == 0x4083E9F0, "bootloader_iram_loader_seg_start inconsistent with SRAM_DRAM_END");
 
 /* Default entry point: */
 ENTRY(call_start_cpu0);
@@ -138,7 +138,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -164,7 +163,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -218,92 +216,40 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
 }
 
 
-/**
+/** TODO: [ESP32C61] IDF-9405, update after rom freeze
  *  Appendix: Memory Usage of ROM bootloader
  *
- * 0x4083ea70 ------------------> _dram0_0_start
+ * 0x4086ad08 ------------------> _dram0_0_start
  *            |               |
  *            |               |
  *            |               |   1. Large buffers that are only used in certain boot modes, see shared_buffers.h
  *            |               |
  *            |               |
- * 0x4084ca70 ------------------> __stack_sentry
+ * 0x4087c610 ------------------> __stack_sentry
  *            |               |
  *            |               |   2. Startup pro cpu stack (freed when IDF app is running)
  *            |               |
- * 0x4084ea70 ------------------> __stack (pro cpu)
+ * 0x4087e610 ------------------> __stack (pro cpu)
  *            |               |
  *            |               |
  *            |               |   3. Shared memory only used in startup code or nonos/early boot*
  *            |               |      (can be freed when IDF runs)
  *            |               |
  *            |               |
- * 0x4084f5d0 ------------------> _dram0_rtos_reserved_start
+ * 0x4087f564 ------------------> _dram0_rtos_reserved_start
  *            |               |
  *            |               |
  *            |               |   4. Shared memory used in startup code and when IDF runs
  *            |               |
  *            |               |
- * 0x4084fc58 ------------------> _dram0_rtos_reserved_end
+ * 0x4087fab0 ------------------> _dram0_rtos_reserved_end
  *            |               |
- * 0x4084fc6c ------------------> _data_start_interface
+ * 0x4087fce8 ------------------> _data_start_interface
  *            |               |
  *            |               |   5. End of DRAM is the 'interface' data with constant addresses (ECO compatible)
  *            |               |
- * 0x40850000 ------------------> _data_end_interface
+ * 0x40880000 ------------------> _data_end_interface
  */

components/bootloader/subproject/main/ld/esp32h2/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -138,7 +138,7 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
+    _data_start = ABSOLUTE(.);
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -164,7 +164,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -218,58 +217,6 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
 }
 
 /**

components/bootloader/subproject/main/ld/esp32p4/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -131,15 +131,9 @@ SECTIONS
     _bss_end = ABSOLUTE(.);
   } > dram_seg
 
-  .dram0.bootdesc : ALIGN(0x10)
-  {
-    _data_start = ABSOLUTE(.);
-    *(.data_bootloader_desc .data_bootloader_desc.*)               /* Should be the first.  Bootloader version info.        DO NOT PUT ANYTHING BEFORE IT! */
-  } > dram_seg
-
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
+    _data_start = ABSOLUTE(.);
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -165,7 +159,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -219,58 +212,6 @@ SECTIONS
     _etext = .;
   } > iram_seg
 
-  .riscv.attributes 0: { *(.riscv.attributes) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
-  /**
-   * Discarding .rela.* sections results in the following mapping:
-   * .rela.text.* -> .text.*
-   * .rela.data.* -> .data.*
-   * And so forth...
-   */
-  /DISCARD/ : { *(.rela.*) }
-
 }
 
 

components/bootloader/subproject/main/ld/esp32s2/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -108,7 +108,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -134,7 +133,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /*  C++ constructor and destructor tables, properly ordered:  */
@@ -207,48 +205,4 @@ SECTIONS
     KEEP (*(.xt.lit .gnu.linkonce.p.*))
   }
 
-  .xtensa.info 0: { *(.xtensa.info) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
 }

components/bootloader/subproject/main/ld/esp32s3/bootloader.ld

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -142,7 +142,6 @@ SECTIONS
 
   .dram0.data :
   {
-    *(.dram1 .dram1.*) /* catch stray DRAM_ATTR */
     *(.data)
     *(.data.*)
     *(.gnu.linkonce.d.*)
@@ -168,7 +167,6 @@ SECTIONS
     *(.gcc_except_table)
     *(.gnu.linkonce.e.*)
     *(.gnu.version_r)
-    *(.eh_frame_hdr)
     *(.eh_frame)
     . = (. + 3) & ~ 3;
     /* C++ constructor and destructor tables, properly ordered: */
@@ -241,50 +239,6 @@ SECTIONS
     KEEP (*(.xt.lit .gnu.linkonce.p.*))
   }
 
-  .xtensa.info 0: { *(.xtensa.info) }
-
-  /* DWARF 1 */
-  .debug              0 : { *(.debug) }
-  .line               0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo      0 : { *(.debug_srcinfo) }
-  .debug_sfnames      0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges      0 : { *(.debug_aranges) }
-  .debug_pubnames     0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info         0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev       0 : { *(.debug_abbrev) }
-  .debug_line         0 : { *(.debug_line) }
-  .debug_frame        0 : { *(.debug_frame) }
-  .debug_str          0 : { *(.debug_str) }
-  .debug_loc          0 : { *(.debug_loc) }
-  .debug_macinfo      0 : { *(.debug_macinfo) }
-  .debug_pubtypes     0 : { *(.debug_pubtypes) }
-  /* DWARF 3 */
-  .debug_ranges       0 : { *(.debug_ranges) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames    0 : { *(.debug_weaknames) }
-  .debug_funcnames    0 : { *(.debug_funcnames) }
-  .debug_typenames    0 : { *(.debug_typenames) }
-  .debug_varnames     0 : { *(.debug_varnames) }
-  /* GNU DWARF 2 extensions */
-  .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }
-  .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }
-  /* DWARF 4 */
-  .debug_types        0 : { *(.debug_types) }
-  /* DWARF 5 */
-  .debug_addr         0 : { *(.debug_addr) }
-  .debug_line_str     0 : { *(.debug_line_str) }
-  .debug_loclists     0 : { *(.debug_loclists) }
-  .debug_macro        0 : { *(.debug_macro) }
-  .debug_names        0 : { *(.debug_names) }
-  .debug_rnglists     0 : { *(.debug_rnglists) }
-  .debug_str_offsets  0 : { *(.debug_str_offsets) }
-
-  .comment 0 : { *(.comment) }
-  .note.GNU-stack 0: { *(.note.GNU-stack) }
-
 }
 
 /**

components/bootloader_support/CMakeLists.txt

@@ -15,7 +15,7 @@ set(srcs
     "src/secure_boot.c"
     )
 
-if(NOT CONFIG_ESP_BRINGUP_BYPASS_RANDOM_SETTING)
+if(NOT CONFIG_IDF_ENV_FPGA)
     # For FPGA ENV, bootloader_random implementation is implemented in `bootloader_random.c`
     list(APPEND srcs "src/bootloader_random_${IDF_TARGET}.c")
 endif()
@@ -36,10 +36,6 @@ if(CONFIG_APP_BUILD_TYPE_APP_2NDBOOT)
         )
 endif()
 
-if(CONFIG_ESP_ROM_REV0_HAS_NO_ECDSA_INTERFACE)
-    list(APPEND srcs "src/${IDF_TARGET}/bootloader_ecdsa.c")
-endif()
-
 if(BOOTLOADER_BUILD OR CONFIG_APP_BUILD_TYPE_RAM)
     set(include_dirs "include" "bootloader_flash/include"
         "private_include")
@@ -54,6 +50,10 @@ if(BOOTLOADER_BUILD OR CONFIG_APP_BUILD_TYPE_RAM)
     "src/${IDF_TARGET}/bootloader_${IDF_TARGET}.c"
     )
     list(APPEND priv_requires hal)
+    if(CONFIG_ESP_ROM_REV0_HAS_NO_ECDSA_INTERFACE)
+        list(APPEND srcs
+            "src/${IDF_TARGET}/bootloader_ecdsa.c")
+    endif()
 else()
     list(APPEND srcs
         "src/idf/bootloader_sha.c")

components/bootloader_support/bootloader_flash/include/bootloader_flash_priv.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -13,7 +13,6 @@
 #include <spi_flash_mmap.h> /* including in bootloader for error values */
 #include "sdkconfig.h"
 #include "bootloader_flash.h"
-#include "soc/ext_mem_defs.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -21,11 +20,8 @@ extern "C" {
 
 #define FLASH_SECTOR_SIZE 0x1000
 #define FLASH_BLOCK_SIZE 	0x10000
-
 #define MMAP_ALIGNED_MASK 	(SPI_FLASH_MMU_PAGE_SIZE - 1)
 #define MMU_FLASH_MASK    (~(SPI_FLASH_MMU_PAGE_SIZE - 1))
-#define MMU_FLASH_MASK_FROM_VAL(PAGE_SZ) (~((PAGE_SZ) - 1))
-#define MMU_DROM_END_ENTRY_VADDR_FROM_VAL(PAGE_SZ) (SOC_DRAM_FLASH_ADDRESS_HIGH - (PAGE_SZ))
 
 /**
  * MMU mapping must always be in the unit of a SPI_FLASH_MMU_PAGE_SIZE
@@ -93,7 +89,7 @@ uint32_t bootloader_mmap_get_free_pages(void);
  * @param length - Length of data to map.
  *
  * @return Pointer to mapped data memory (at src_addr), or NULL
- * if an allocation error occurred.
+ * if an allocation error occured.
  */
 const void *bootloader_mmap(uint32_t src_addr, uint32_t size);
 

components/bootloader_support/bootloader_flash/include/esp_private/bootloader_flash_internal.h

@@ -1,12 +1,11 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 #pragma once
 #include <stdint.h>
 #include <esp_err.h>
-#include "soc/soc_caps.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -28,11 +27,6 @@ esp_err_t bootloader_init_spi_flash(void);
 void bootloader_flash_hardware_init(void);
 #endif
 
-/**
- * @brief Initialise mspi core clock
- */
-void bootloader_init_mspi_clock(void);
-
 #ifdef __cplusplus
 }
 #endif

components/bootloader_support/bootloader_flash/src/bootloader_flash.c

@@ -13,13 +13,21 @@
 #include "hal/efuse_ll.h"
 #include "hal/efuse_hal.h"
 
-#ifndef BOOTLOADER_BUILD
-#include "spi_flash_mmap.h"
-#endif
 #include "hal/spi_flash_ll.h"
 #include "rom/spi_flash.h"
-#if !CONFIG_IDF_TARGET_ESP32
-#include "hal/spimem_flash_ll.h"
+#if CONFIG_IDF_TARGET_ESP32
+#   include "soc/spi_struct.h"
+#   include "soc/spi_reg.h"
+    /* SPI flash controller */
+#   define SPIFLASH SPI1
+#   define SPI0     SPI0
+#else
+#   include "hal/spimem_flash_ll.h"
+#   include "soc/spi_mem_struct.h"
+#   include "soc/spi_mem_reg.h"
+    /* SPI flash controller */
+#   define SPIFLASH SPIMEM1
+#   define SPI0     SPIMEM0
 #endif
 
 // This dependency will be removed in the future.  IDF-5025
@@ -125,8 +133,6 @@ esp_err_t bootloader_flash_erase_range(uint32_t start_addr, uint32_t size)
 
 #if CONFIG_IDF_TARGET_ESP32S3
 #include "esp32s3/rom/opi_flash.h"
-#elif CONFIG_IDF_TARGET_ESP32P4
-#include "esp32p4/rom/opi_flash.h"
 #endif
 static const char *TAG = "bootloader_flash";
 
@@ -323,8 +329,7 @@ static esp_err_t bootloader_flash_read_allow_decrypt(size_t src_addr, void *dest
             ESP_EARLY_LOGD(TAG, "mmu set block paddr=0x%08" PRIx32 " (was 0x%08" PRIx32 ")", map_at, current_read_mapping);
 #if CONFIG_IDF_TARGET_ESP32
             //Should never fail if we only map a SPI_FLASH_MMU_PAGE_SIZE to the vaddr starting from FLASH_READ_VADDR
-            // Return value unused if asserts are disabled
-            int e __attribute__((unused)) = cache_flash_mmu_set(0, 0, FLASH_READ_VADDR, map_at, 64, 1);
+            int e = cache_flash_mmu_set(0, 0, FLASH_READ_VADDR, map_at, 64, 1);
             assert(e == 0);
 #else
             uint32_t actual_mapped_len = 0;
@@ -577,43 +582,61 @@ IRAM_ATTR uint32_t bootloader_flash_execute_command_common(
 {
     assert(mosi_len <= 32);
     assert(miso_len <= 32);
-    uint32_t old_ctrl_reg = 0;
-    uint32_t old_user_reg = 0;
-    uint32_t old_user1_reg = 0;
-    uint32_t old_user2_reg = 0;
-    spi_flash_ll_get_common_command_register_info(&SPIMEM_LL_APB, &old_ctrl_reg, &old_user_reg, &old_user1_reg, &old_user2_reg);
-    SPIMEM_LL_APB.ctrl.val = 0;
+    uint32_t old_ctrl_reg = SPIFLASH.ctrl.val;
+    uint32_t old_user_reg = SPIFLASH.user.val;
+    uint32_t old_user1_reg = SPIFLASH.user1.val;
+    uint32_t old_user2_reg = SPIFLASH.user2.val;
+    // Clear ctrl regs.
+    SPIFLASH.ctrl.val = 0;
 #if CONFIG_IDF_TARGET_ESP32
-    spi_flash_ll_set_wp_level(&SPIMEM_LL_APB, true);
+    spi_flash_ll_set_wp_level(&SPIFLASH, true);
 #else
-    spimem_flash_ll_set_wp_level(&SPIMEM_LL_APB, true);
+    spimem_flash_ll_set_wp_level(&SPIFLASH, true);
 #endif
     //command phase
-    spi_flash_ll_set_command(&SPIMEM_LL_APB, command, 8);
+    SPIFLASH.user.usr_command = 1;
+    SPIFLASH.user2.usr_command_bitlen = 7;
+    SPIFLASH.user2.usr_command_value = command;
     //addr phase
-    spi_flash_ll_set_addr_bitlen(&SPIMEM_LL_APB, addr_len);
-    spi_flash_ll_set_usr_address(&SPIMEM_LL_APB, address, addr_len);
+    SPIFLASH.user.usr_addr = addr_len > 0;
+    SPIFLASH.user1.usr_addr_bitlen = addr_len - 1;
+#if CONFIG_IDF_TARGET_ESP32
+    SPIFLASH.addr = (addr_len > 0)? (address << (32-addr_len)) : 0;
+#else
+    SPIFLASH.addr = address;
+#endif
     //dummy phase
     uint32_t total_dummy = dummy_len;
     if (miso_len > 0) {
         total_dummy += g_rom_spiflash_dummy_len_plus[1];
     }
-    spi_flash_ll_set_dummy(&SPIMEM_LL_APB, total_dummy);
+    SPIFLASH.user.usr_dummy = total_dummy > 0;
+    SPIFLASH.user1.usr_dummy_cyclelen = total_dummy - 1;
     //output data
-
-    spi_flash_ll_set_mosi_bitlen(&SPIMEM_LL_APB, mosi_len);
-    spi_flash_ll_set_buffer_data(&SPIMEM_LL_APB, &mosi_data, mosi_len / 8);
+    SPIFLASH.user.usr_mosi = mosi_len > 0;
+#if CONFIG_IDF_TARGET_ESP32
+    SPIFLASH.mosi_dlen.usr_mosi_dbitlen = mosi_len ? (mosi_len - 1) : 0;
+#else
+    SPIFLASH.mosi_dlen.usr_mosi_bit_len = mosi_len ? (mosi_len - 1) : 0;
+#endif
+    SPIFLASH.data_buf[0] = mosi_data;
     //input data
-    spi_flash_ll_set_miso_bitlen(&SPIMEM_LL_APB, miso_len);
+    SPIFLASH.user.usr_miso = miso_len > 0;
+#if CONFIG_IDF_TARGET_ESP32
+    SPIFLASH.miso_dlen.usr_miso_dbitlen = miso_len ? (miso_len - 1) : 0;
+#else
+    SPIFLASH.miso_dlen.usr_miso_bit_len = miso_len ? (miso_len - 1) : 0;
+#endif
 
-    spi_flash_ll_user_start(&SPIMEM_LL_APB, false);
-    while(!spi_flash_ll_cmd_is_done(&SPIMEM_LL_APB)) {
+    SPIFLASH.cmd.usr = 1;
+    while (SPIFLASH.cmd.usr != 0) {
     }
-    spi_flash_ll_set_common_command_register_info(&SPIMEM_LL_APB, old_ctrl_reg, old_user_reg, old_user1_reg, old_user2_reg);
+    SPIFLASH.ctrl.val = old_ctrl_reg;
+    SPIFLASH.user.val = old_user_reg;
+    SPIFLASH.user1.val = old_user1_reg;
+    SPIFLASH.user2.val = old_user2_reg;
 
-    uint32_t output_data = 0;
-    spi_flash_ll_get_buffer_data(&SPIMEM_LL_APB, &output_data, miso_len / 8);
-    uint32_t ret = output_data;
+    uint32_t ret = SPIFLASH.data_buf[0];
     if (miso_len < 32) {
         //set unused bits to 0
         ret &= ~(UINT32_MAX << miso_len);
@@ -669,7 +692,7 @@ void bootloader_spi_flash_reset(void)
  ******************************************************************************/
 
 #define XMC_SUPPORT CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT
-#define XMC_VENDOR_ID_1 0x20
+#define XMC_VENDOR_ID 0x20
 
 #if BOOTLOADER_BUILD
 #define BOOTLOADER_FLASH_LOG(level, ...)    ESP_EARLY_LOG##level(TAG, ##__VA_ARGS__)
@@ -686,7 +709,7 @@ static IRAM_ATTR bool is_xmc_chip_strict(uint32_t rdid)
     uint32_t mfid = BYTESHIFT(rdid, 1);
     uint32_t cpid = BYTESHIFT(rdid, 0);
 
-    if (vendor_id != XMC_VENDOR_ID_1) {
+    if (vendor_id != XMC_VENDOR_ID) {
         return false;
     }
 
@@ -719,7 +742,7 @@ esp_err_t IRAM_ATTR bootloader_flash_xmc_startup(void)
     // Check the Manufacturer ID in SFDP registers (JEDEC standard). If not XMC chip, no need to run the flow
     const int sfdp_mfid_addr = 0x10;
     uint8_t mf_id = (bootloader_flash_read_sfdp(sfdp_mfid_addr, 1) & 0xff);
-    if (mf_id != XMC_VENDOR_ID_1) {
+    if (mf_id != XMC_VENDOR_ID) {
         BOOTLOADER_FLASH_LOG(D, "non-XMC chip detected by SFDP Read (%02X), skip.", mf_id);
         return ESP_OK;
     }
@@ -751,7 +774,7 @@ esp_err_t IRAM_ATTR bootloader_flash_xmc_startup(void)
 static IRAM_ATTR bool is_xmc_chip(uint32_t rdid)
 {
     uint32_t vendor_id = (rdid >> 16) & 0xFF;
-    return (vendor_id == XMC_VENDOR_ID_1);
+    return (vendor_id == XMC_VENDOR_ID);
 }
 
 esp_err_t IRAM_ATTR bootloader_flash_xmc_startup(void)
@@ -765,9 +788,28 @@ esp_err_t IRAM_ATTR bootloader_flash_xmc_startup(void)
 
 #endif //XMC_SUPPORT
 
+FORCE_INLINE_ATTR void bootloader_mspi_reset(void)
+{
+#if CONFIG_IDF_TARGET_ESP32
+    SPI1.slave.sync_reset = 0;
+    SPI0.slave.sync_reset = 0;
+    SPI1.slave.sync_reset = 1;
+    SPI0.slave.sync_reset = 1;
+    SPI1.slave.sync_reset = 0;
+    SPI0.slave.sync_reset = 0;
+#else
+    SPIMEM1.ctrl2.sync_reset = 0;
+    SPIMEM0.ctrl2.sync_reset = 0;
+    SPIMEM1.ctrl2.sync_reset = 1;
+    SPIMEM0.ctrl2.sync_reset = 1;
+    SPIMEM1.ctrl2.sync_reset = 0;
+    SPIMEM0.ctrl2.sync_reset = 0;
+#endif
+}
+
 esp_err_t IRAM_ATTR bootloader_flash_reset_chip(void)
 {
-    spi_flash_ll_sync_reset();
+    bootloader_mspi_reset();
     // Seems that sync_reset cannot make host totally idle.'
     // Sending an extra(useless) command to make the host idle in order to send reset command.
     bootloader_execute_flash_command(0x05, 0, 0, 0);
@@ -797,7 +839,7 @@ bool IRAM_ATTR bootloader_flash_is_octal_mode_enabled(void)
 esp_rom_spiflash_read_mode_t bootloader_flash_get_spi_mode(void)
 {
     esp_rom_spiflash_read_mode_t spi_mode = ESP_ROM_SPIFLASH_FASTRD_MODE;
-    uint32_t spi_ctrl = spi_flash_ll_get_ctrl_val(&SPIMEM_LL_CACHE);
+    uint32_t spi_ctrl = spi_flash_ll_get_ctrl_val(&SPI0);
 #if CONFIG_IDF_TARGET_ESP32
     if (spi_ctrl & SPI_FREAD_QIO) {
         spi_mode = ESP_ROM_SPIFLASH_QIO_MODE;

components/bootloader_support/bootloader_flash/src/bootloader_flash_config_esp32.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2018-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2018-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -28,12 +28,12 @@
 #include "bootloader_flash_priv.h"
 #include "bootloader_init.h"
 
-#define FLASH_CLK_IO    MSPI_IOMUX_PIN_NUM_CLK
-#define FLASH_CS_IO     MSPI_IOMUX_PIN_NUM_CS0
-#define FLASH_SPIQ_IO   MSPI_IOMUX_PIN_NUM_MISO
-#define FLASH_SPID_IO   MSPI_IOMUX_PIN_NUM_MOSI
-#define FLASH_SPIWP_IO  MSPI_IOMUX_PIN_NUM_WP
-#define FLASH_SPIHD_IO  MSPI_IOMUX_PIN_NUM_HD
+#define FLASH_CLK_IO SPI_CLK_GPIO_NUM
+#define FLASH_CS_IO SPI_CS0_GPIO_NUM
+#define FLASH_SPIQ_IO SPI_Q_GPIO_NUM
+#define FLASH_SPID_IO SPI_D_GPIO_NUM
+#define FLASH_SPIWP_IO SPI_WP_GPIO_NUM
+#define FLASH_SPIHD_IO SPI_HD_GPIO_NUM
 
 void bootloader_flash_update_id(void)
 {
@@ -98,15 +98,15 @@ void IRAM_ATTR bootloader_flash_gpio_config(const esp_image_header_t* pfhdr)
     } else {
         const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
         if (spiconfig == ESP_ROM_EFUSE_FLASH_DEFAULT_SPI) {
-            esp_rom_gpio_connect_out_signal(FLASH_CS_IO, SPICS0_OUT_IDX, 0, 0);
-            esp_rom_gpio_connect_out_signal(FLASH_SPIQ_IO, SPIQ_OUT_IDX, 0, 0);
-            esp_rom_gpio_connect_in_signal(FLASH_SPIQ_IO, SPIQ_IN_IDX, 0);
-            esp_rom_gpio_connect_out_signal(FLASH_SPID_IO, SPID_OUT_IDX, 0, 0);
-            esp_rom_gpio_connect_in_signal(FLASH_SPID_IO, SPID_IN_IDX, 0);
-            esp_rom_gpio_connect_out_signal(FLASH_SPIWP_IO, SPIWP_OUT_IDX, 0, 0);
-            esp_rom_gpio_connect_in_signal(FLASH_SPIWP_IO, SPIWP_IN_IDX, 0);
-            esp_rom_gpio_connect_out_signal(FLASH_SPIHD_IO, SPIHD_OUT_IDX, 0, 0);
-            esp_rom_gpio_connect_in_signal(FLASH_SPIHD_IO, SPIHD_IN_IDX, 0);
+            esp_rom_gpio_connect_out_signal(SPI_IOMUX_PIN_NUM_CS, SPICS0_OUT_IDX, 0, 0);
+            esp_rom_gpio_connect_out_signal(SPI_IOMUX_PIN_NUM_MISO, SPIQ_OUT_IDX, 0, 0);
+            esp_rom_gpio_connect_in_signal(SPI_IOMUX_PIN_NUM_MISO, SPIQ_IN_IDX, 0);
+            esp_rom_gpio_connect_out_signal(SPI_IOMUX_PIN_NUM_MOSI, SPID_OUT_IDX, 0, 0);
+            esp_rom_gpio_connect_in_signal(SPI_IOMUX_PIN_NUM_MOSI, SPID_IN_IDX, 0);
+            esp_rom_gpio_connect_out_signal(SPI_IOMUX_PIN_NUM_WP, SPIWP_OUT_IDX, 0, 0);
+            esp_rom_gpio_connect_in_signal(SPI_IOMUX_PIN_NUM_WP, SPIWP_IN_IDX, 0);
+            esp_rom_gpio_connect_out_signal(SPI_IOMUX_PIN_NUM_HD, SPIHD_OUT_IDX, 0, 0);
+            esp_rom_gpio_connect_in_signal(SPI_IOMUX_PIN_NUM_HD, SPIHD_IN_IDX, 0);
             //select pin function gpio
             gpio_hal_iomux_func_sel(PERIPHS_IO_MUX_SD_DATA0_U, PIN_FUNC_GPIO);
             gpio_hal_iomux_func_sel(PERIPHS_IO_MUX_SD_DATA1_U, PIN_FUNC_GPIO);
@@ -190,7 +190,7 @@ int bootloader_flash_get_wp_pin(void)
     case EFUSE_RD_CHIP_VER_PKG_ESP32PICOV302:
         return ESP32_PICO_V3_GPIO;
     default:
-        return MSPI_IOMUX_PIN_NUM_WP;
+        return SPI_WP_GPIO_NUM;
     }
 #endif
 }

components/bootloader_support/bootloader_flash/src/bootloader_flash_config_esp32c2.c

@@ -88,12 +88,12 @@ void IRAM_ATTR bootloader_configure_spi_pins(int drv)
 {
     // IDF-4066
     const uint32_t spiconfig = 0;
-    uint8_t clk_gpio_num = MSPI_IOMUX_PIN_NUM_CLK;
-    uint8_t q_gpio_num   = MSPI_IOMUX_PIN_NUM_MISO;
-    uint8_t d_gpio_num   = MSPI_IOMUX_PIN_NUM_MOSI;
-    uint8_t cs0_gpio_num = MSPI_IOMUX_PIN_NUM_CS0;
-    uint8_t hd_gpio_num  = MSPI_IOMUX_PIN_NUM_HD;
-    uint8_t wp_gpio_num  = MSPI_IOMUX_PIN_NUM_WP;
+    uint8_t clk_gpio_num = SPI_CLK_GPIO_NUM;
+    uint8_t q_gpio_num   = SPI_Q_GPIO_NUM;
+    uint8_t d_gpio_num   = SPI_D_GPIO_NUM;
+    uint8_t cs0_gpio_num = SPI_CS0_GPIO_NUM;
+    uint8_t hd_gpio_num  = SPI_HD_GPIO_NUM;
+    uint8_t wp_gpio_num  = SPI_WP_GPIO_NUM;
     if (spiconfig == 0) {
 
     }

components/bootloader_support/bootloader_flash/src/bootloader_flash_config_esp32c3.c

@@ -92,12 +92,12 @@ void IRAM_ATTR bootloader_configure_spi_pins(int drv)
 {
     const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
     uint8_t wp_pin = esp_rom_efuse_get_flash_wp_gpio();
-    uint8_t clk_gpio_num = MSPI_IOMUX_PIN_NUM_CLK;
-    uint8_t q_gpio_num   = MSPI_IOMUX_PIN_NUM_MISO;
-    uint8_t d_gpio_num   = MSPI_IOMUX_PIN_NUM_MOSI;
-    uint8_t cs0_gpio_num = MSPI_IOMUX_PIN_NUM_CS0;
-    uint8_t hd_gpio_num  = MSPI_IOMUX_PIN_NUM_HD;
-    uint8_t wp_gpio_num  = MSPI_IOMUX_PIN_NUM_WP;
+    uint8_t clk_gpio_num = SPI_CLK_GPIO_NUM;
+    uint8_t q_gpio_num   = SPI_Q_GPIO_NUM;
+    uint8_t d_gpio_num   = SPI_D_GPIO_NUM;
+    uint8_t cs0_gpio_num = SPI_CS0_GPIO_NUM;
+    uint8_t hd_gpio_num  = SPI_HD_GPIO_NUM;
+    uint8_t wp_gpio_num  = SPI_WP_GPIO_NUM;
     if (spiconfig == 0) {
 
     } else {