feedc0de/espwifistack
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity

More modem tests

Browse Source
This commit is contained in:
0xFEEDC0DE64
2023-05-15 10:56:22 +02:00
parent 4b5da21029
commit 382b82ff5d
1 changed files with 50 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

58
src/espwifistack.cpp
View File

@@ -27,9 +27,8 @@
#endif
#include <lwip/netif.h>
#include <esp_mac.h>
#ifdef CONFIG_ETH_ENABLED
#include <driver/gpio.h>
#ifdef CONFIG_ETH_ENABLED
#include <esp_eth.h>
#include <esp_eth_phy.h>
#include <esp_eth_mac.h>
@@ -2886,14 +2885,57 @@ std::expected<void, std::string> eth_begin(const config &config, const eth_confi
#ifdef CONFIG_PPP_SUPPORT
esp_err_t modem_init()
{
constexpr gpio_num_t powerPin = GPIO_NUM_4;
constexpr gpio_num_t resetPin = GPIO_NUM_17;
constexpr gpio_num_t txPin = GPIO_NUM_16;
constexpr gpio_num_t rxPin = GPIO_NUM_34;
constexpr gpio_num_t rtsPin = GPIO_NUM_19;
constexpr gpio_num_t ctsPin = GPIO_NUM_18;
{
const gpio_config_t config {
.pin_bit_mask = 1ULL << powerPin,
.mode = GPIO_MODE_OUTPUT,
.pull_up_en = GPIO_PULLUP_DISABLE,
.pull_down_en = GPIO_PULLDOWN_DISABLE,
.intr_type = GPIO_INTR_DISABLE,
};
if (const auto result = gpio_config(&config); result != ESP_OK)
ESP_LOGE(TAG, "gpio_config() failed %s", esp_err_to_name(result));
if (const auto result = gpio_set_level(powerPin, true); result != ESP_OK)
ESP_LOGE(TAG, "gpio_set_level() failed with %s", esp_err_to_name(result));
}
{
const gpio_config_t config {
.pin_bit_mask = 1ULL << resetPin,
.mode = GPIO_MODE_OUTPUT,
.pull_up_en = GPIO_PULLUP_DISABLE,
.pull_down_en = GPIO_PULLDOWN_DISABLE,
.intr_type = GPIO_INTR_DISABLE,
};
if (const auto result = gpio_config(&config); result != ESP_OK)
ESP_LOGE(TAG, "gpio_config() failed %s", esp_err_to_name(result));
if (const auto result = gpio_set_level(resetPin, true); result != ESP_OK)
ESP_LOGE(TAG, "gpio_set_level() failed with %s", esp_err_to_name(result));
espcpputils::delay(50ms);
if (const auto result = gpio_set_level(resetPin, false); result != ESP_OK)
ESP_LOGE(TAG, "gpio_set_level() failed with %s", esp_err_to_name(result));
}
/* Configure and create the DTE */
esp_modem_dte_config_t dte_config = ESP_MODEM_DTE_DEFAULT_CONFIG();
/* setup UART specific configuration based on kconfig options */
dte_config.uart_config.baud_rate = 9600;
dte_config.uart_config.tx_io_num = 17;
dte_config.uart_config.rx_io_num = 4;
//dte_config.uart_config.rts_io_num = ;
//dte_config.uart_config.cts_io_num = ;
dte_config.uart_config.baud_rate = 115200;
dte_config.uart_config.tx_io_num = txPin;
dte_config.uart_config.rx_io_num = rxPin;
dte_config.uart_config.rts_io_num = rtsPin;
dte_config.uart_config.cts_io_num = ctsPin;
dte_config.uart_config.flow_control = ESP_MODEM_FLOW_CONTROL_NONE; //ESP_MODEM_FLOW_CONTROL_NONE, ESP_MODEM_FLOW_CONTROL_SW, ESP_MODEM_FLOW_CONTROL_HW
auto dte = esp_modem::create_uart_dte(&dte_config);
@@ -2917,7 +2959,7 @@ esp_err_t modem_init()
return ESP_FAIL;
}
auto dce = esp_modem::create_BG96_dce(&dce_config, dte, esp_netif);
auto dce = esp_modem::create_SIM7600_dce(&dce_config, dte, esp_netif);
if (!dce)
{
ESP_LOGE(TAG, "create_SIM800_dce() failed");