The yamaha component previously used a property named unique_id to
ensure that exactly 1 media_player was discovered per zone per
control_url. This was introduced so that hard coded devices wouldn't
be duplicated by automatically discovered devices.
In HA 0.63 unique_id became a reserved concept as part of the new
device registry, and the property was removed from the component. But
the default returns None, which had the side effect of only ever
registering a single unit + zone, the first one discovered. This was
typically the Main_Zone of the unit, but there is actually no
guaruntee of that.
This fix brings back the logic under a different property called
zone_id. This is not guarunteed to be globally stable like unique_id
is supposed to be, but it is suitable for the deduplication for yamaha
media players.
* Correct time on recorder loaded values in statistics sensor
Previously, the current time was used when initial values was loaded
form the recorder component. This changes that to use the stored time
from recorder instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Expose min / max age of values in the statistics sensor
This is very useful when doing derived calculations, for example in a
template sensor.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Fix duplicate entity_ids in System Monitor
This fix makes it so `_percent` is appended to the `entity_id` of the following 3 resources, in order to make the `entity_id` unique:
- disk_use_percent
- memory_use_percent
- swap_use_percent
* match entity_id to resource name
Match entity_id to resource name, to make resulting entity_id more predictable
* match entity_id to more resource names
match entity_id to more resource names
* Add unique_id property
* Revert "Add unique_id property"
This reverts commit c213ac360e0fa90ab1b9cfbd2161413f038a4ff1.
* Added timestamp at the end of the iTunes API URL from where HA retrieves the artwork, so that it's not cached, as the URL exposed by the API never changes
* Rearranged imports according to pylint
* Added content_id in media file URL instead of timestamp, according to Paulus' suggestion
* added more debug logging for sensor.alpha_vantage
* fixed typo in log statement, more fine grained logging
* Capitalized first character in log statement
* replaced quotes as proposed by @OttoWinter
* Add a processing queue to influxdb
* Updates after reviews
* Remove lint
* Move retry loop to thread class
* Move constant calculation out of loop
* Deprecate retry_queue_limit
* Simplify entity update
* Split entity platform from entity component
* Decouple entity platform from entity component
* Always include unit of measurement again
* Lint
* Fix test
* Add wake on lan capability to philips TV
* Update requirements_all.txt
* Fix line length issues.
* Replace wake on lan with turn on script for philips TV
* rerun requirements script
* First version of remote xiaomi-miio
* added to coveragerc
* fixed pylint error
* misc fixes and input validation
* address syssi's requests except device and async_service_handler
* forgot to run linter
* implemented async_service_handler
* fixed delay == None, honor timeout given by user, pythonic compare of None
* Added some whitespace for readability, added error message to turn_on and turn_off, fixed services.yaml examples
* fixed pylint errors
* readd pass for readability
* fixed small stuff
* Use RemoteDevice, Make send_command non-async
* Ready code for next version of python-miio (Support for pronto hex codes)
* cast command_optional to int, better input validation, fixed index out of bounds error.
* revert code now in python-miio
* ready for python-miio 0.3.5
* Removed unneccary return statements
* require 0.3.5
* Rebase and update requirements_all.txt
* Added support for Canary live stream view
* Updated requirements
* - Fixed lint error
* Addressed PR comment
* - Disabled polling for Canary camera as suggested in PR comment
- Live session is now renewed every time camera is retrieved and min time between session renewal is 90 seconds
* Add error handling to TP-LInk LED state set
Handles errors when setting the LED state of TP-Link sockets.
If the socket is unavailable then the raised exception will cause the
compoent to not be added to HA.
* Move LED state setting out of __init__
* Implemented play_media
Panasonic Viera TV has a full blown Web Browser that can play any media
* media stop
* format checks
* added SUPPORT_*
* bump version
* Tks @rytilahti
* one too many
* fix generic_thermostat bug when restore state from HA start up
if you don't set "initial_operation_mode" in config, you will get
`self._enabled = True` when init GenericThermostat. And then you will
miss the `if self._current_operation != STATE_OFF` statement and the
self._enabled still keep `True`. That's the problem
* add a test to describe the restore case
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* Add baudrate option
* merge
* Added Mediaroom media_player component
* Updated header
Works with MEO and VDF set-top boxes in Portugal
* formatting
* Development Checklist (done)
* fix formatting according to houndci-bot
* more format fixing (tks houndci-bot)
* more fixes
* too much cleanup...
* too much
* pylint check
* Initial commit
Basic configuration testing
* flake8 and lint
* Fix tado overlay end state
Previously, when tado ended an overlay state itself, say because a timer
expired or a scheduled temperature change ocurred, the tado climate
component would not return to Smart Schedule mode. This change fixes
that issue
* Correct tado state after multiple rapid updates
Previosuly, making two changes to tado climate within 10 seconds, for
example setting operation mode to Tado mode, then changing the
temperature, would leave the entity showing the incorrect state for up
to a minute.
This change forces an unthrottled update after setting the climate
state, which fixes the issue
* Fix comment formatting
* Added Channel attribute to webos media pplayer
* webostv: Current TV channel display as media_title
* Added displaying information about the current TV channel for WebOS platform
* Fixed PEP8 requirements
* Add Mercedes me component
* pump api version to 0.1.2
* Add Mercedes me component
* pump api version to 0.1.2
* clean up code
* Code cleanup
* Remove unneeded return statement
* Return statements added again
* Implement requested changes
* Rework component, move data load to component
* lint
* remove debug logging
* Change RainCloud comments, change from track_utc_time to track_time_interval
* Final cleanup for version 1
The module `asyncio.test_utils` has been removed from Python in the 3.7 branch, because it was intended to be a private module for internal testing of asyncio. For more information, see the upstream bug report at https://bugs.python.org/issue32273 and the upstream PR at https://github.com/python/cpython/pull/4785.
For this commit, I have migrated the small amount of functionality that was being used from the `asyncio.test_utils` directly into the `RunThreadsafeTests` Class. To see the original `asyncio.test_utils.TestCase` class, which I pulled some functionality from, please see: https://github.com/python/cpython/blob/3.6/Lib/asyncio/test_utils.py#L440
Note: In addition to being broken in 3.7, this test case also seems to be broken in Python 3.6.4 when using Docker. This PR fixes the test when run in docker.
To reproduce: `./script/test_docker -- tests/util/test_async.py`
failing output (prior to this commit):
```
... trimmed ...
py36 runtests: PYTHONHASHSEED='3262989550'
py36 runtests: commands[0] | py.test --timeout=9 --duration=10 --cov --cov-report= tests/util/test_async.py
Test session starts (platform: linux, Python 3.6.4, pytest 3.3.1, pytest-sugar 0.9.0)
rootdir: /usr/src/app, inifile: setup.cfg
plugins: timeout-1.2.1, sugar-0.9.0, cov-2.5.1, aiohttp-0.3.0
timeout: 9.0s method: signal
―――――――――――――――――― ERROR collecting tests/util/test_async.py ――――――――――――――――――――――――
ImportError while importing test module '/usr/src/app/tests/util/test_async.py'.
Hint: make sure your test modules/packages have valid Python names.
Traceback:
tests/util/test_async.py:3: in <module>
from asyncio import test_utils
/usr/local/lib/python3.6/asyncio/test_utils.py:36: in <module>
from test import support
E ImportError: cannot import name 'support'
```
* added media_stop
VLC was missing the media_stop. The pause was present, but starting the same file result in resuming the file instead of start over new
* Corrected style issues
Style issues and added Support Flag to Support VLC
* fixed other style issues
* remove trailing whitespace
* Fix detection of mobile browsers
* Move break
* Add Mobile browsers to list
`Mobile Safari` is covered by iOS and `Opera Mini` does not support es6
... And Edge doesn't even work on desktop for me...
* Fixing demo platform to use support_flags
* Fixed tests as well
* Moved humidity low / high as always available based on defaults
* Updated demo platform to show more combinations
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* google_assistant: Refactor query_device
The previous code had issues where domains could break out and end up
with weird brightness values and we weren't enforcing the `on` and
`oneline` keys in the response.
* google_assistant: Add media_player to query test
* Handling of payload not for this entity.
The update state-method should not be called if the payload is not intended for this entity.
* Fixing linter errors
* Adding warning for case when no matching payload is found
* Refactor alexa smart_home tests
The previous tests had a lot of copy pasta due to a lack of expressions
for higher-level assertions. I'm hoping this makes it more reasonable to
extend all interfaces to support properties.
* Lint
* sensor.deutsche_bahn: add only_direct option
This adds the `only_direct` option to the HA interface as provided by the schiene class.
* fix line length
as requested by @houndci-bot and @fabaff
* No line breaks needed
* Refactor Alexa Smart Home API
Having an object per interface will make it easier to support
properties.
Ideally, properties are reported in context in all responses. However
current implementation reports them only in response to a ReportState
request. This seems to work sufficiently. As long as the device is
opened in the Alexa app, Amazon will poll the device state every few
seconds with a ReportState request.
* Report properties for some Alexa interfaces
Fixes (mostly) #11874.
Other interfaces will need properties implemented as well.
Implementing properties for just PowerController seems sufficient to
eliminate the "There was a problem." error for any device that supports
it, even if other interfaces are supported. Of course the additional
properties will be reported incorrectly in the Alexa app.
Includes a minor bugfix: `reportable` was previously placed incorrectly
in the responses, so Amazon was ignoring it.
Having an object per interface will make it easier to support
properties.
Ideally, properties are reported in context in all responses. However
current implementation reports them only in response to a ReportState
request. This seems to work sufficiently. As long as the device is
opened in the Alexa app, Amazon will poll the device state every few
seconds with a ReportState request.
* Fixed Canary temperature sensor and remapped air quality value
* Addressed review comment
* - Fixed canary tests and added more tests
- Removed py-canary requirements from tests
* Noop to trigger a build again
* - Removed py-canary requirements from tests
* Addressed PR comment
* - Updated tests
- Removed py-canary from gen_requirements_all.py
* - Fixed hound violation
* Added back py-canary to gen_requirements_all.py as it's still need in tests
* Added back py-canary to test requirements as it's still need in tests
* Address PR comment
* Base platform in place
* Logic in place
* Requirements and coverage
* Fixed some linting issues
* Small attribute reorganization
* Collaborator-requested changes round 1
* Updated documentation
* Send Alexa Smart Home responses to debug log
* Report scripts and groups as scenes to Alexa
The Alexa API docs have a couple display categories that sound relevant
to scenes or scripts:
ACTIVITY_TRIGGER: Describes a combination of devices set to a
specific state, when the state change must occur in a specific
order. For example, a “watch Neflix” scene might require the: 1. TV
to be powered on & 2. Input set to HDMI1.
SCENE_TRIGGER: Describes a combination of devices set to a specific
state, when the order of the state change is not important. For
example a bedtime scene might include turning off lights and
lowering the thermostat, but the order is unimportant.
Additionally, Alexa has a notion of scenes that support deactivation.
This is a natural fit for groups, and scripts with delays which can be
cancelled.
https://developer.amazon.com/docs/device-apis/alexa-discovery.html#display-categories
The mechanism to map entities to the Alexa Discovery response is
refactored since extending the data structures in MAPPING_COMPONENT to
implement supportsDeactivation would have added complication to what I
already found to be a confusing construct.
* Multi-Room Support for Greenwave Reality
* PEP8 Line Too Long
* Update requirements_all.txt
* Shared State Object
Shared State Object added, and implemented new function of greenwavereality to abstract complex runtimes.
* Update requirements_all.txt
* Lint issues
* Rewrite method to not trigger "Method could be a function"
* Remove unnecessary arguments for update call
* Improve foscam library exception support
Catches foscam exceptions that otherwise pollute the log. Many of these exception can safely be ignored
* Fixed line length
Fixed line length
* Changed exception and log handling
changed logging and catched only the TypeError effecting the library
* Removed unused var
Removed var
* Fix remaining issue
* worked on first version of IOTA wallet
* added sensor for IRI node
* added requirements
* ignored new component in test coverage
* changed length of line
* fixed linter issues
* changed requested changes
* moved attributes of IRI node
* change coverage definitions
* changed loading of platforms
* changed loading of platforms
* changed initial state of wallet sensor
* changed handling of config
* changed attribute handling for IOTA node sensor
* Follow the component style
* Fix ordering and docstring
* Fix pylint issue
* New venstar climate component
* Corrected items raised during the PR process.
* Corrected flak8 issues.
* Add support for venstar models without humidity control.
* Changed the idle operation mode to off. Few other adjustments.
* Minor changes (log messages, sorting, etc.)
* Added documentation reference to code
* Some code clean-ups suggested by @MartinHjelmare in PR#: 11695 after merging.
* fixed minor typo in docstring
* fixed another minor typo in same docstring...
* fixed another minor typo in same docstring...
* Release worker thread while waiting for Z-wave startup
* Increase zwave startup timeout
* Adjust test
* Use asyncio.sleep in _check_awaked
* Remove lint
* Name loop parameter
* Expose Alexa Smart Home via HTTP POST
Haaska uses the deprecated v2 Alexa Smart Home payload. Exposing the v3
implementation this way allows an easy path to upgrading Haaska and
reducing code duplication with Home Assistant Cloud.
* Expose Alexa Smart Home via HTTP POST
Haaska uses the deprecated v2 Alexa Smart Home payload. Exposing the v3
implementation this way allows an easy path to upgrading Haaska and
reducing code duplication with Home Assistant Cloud.
In local testing py36 always fails on test_minimal_config on a wait
call that never completes. One difference between this test and others
in the class is the lack of a mock on `call`. With this added, the
test passes locally 100%.
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* fixed error with wrong arguments number during callback call
* reset unavailability state on new message received from device
* use locks to fix race condition during managing _state property
* overriden state() method for some components to check for STATE_UNAVAILABLE and return it instead e.g. STATE_OFF
* fixed linter
* removed blank line
* use available() method instead of changing _state
* filter motion sensors 'heartbeat', was removed from PyXiaomiGateway
* remove self._hass, use self.hass set by HA on attach
* self.push_data now running in the event loop, use async_schedule_update_ha_state()
* merge fix
* removed accidentally added home-assistant-polymer
* bump PyXiaomiGateway version to 0.8.0
* bump PyXiaomiGateway to 0.8.0
* updated methods names and annotations
* Adding BME680 Sensor Component
* Flake8 lint fixes
* PyLint fixes
* Fix for log line
* Updating requirements for testing
* Fix PyLint Log format errors and add to coveragerc ommisions as requires sensor connected
* Regenerated requirements_all.txt
* Added Pylint exception for import error of system specific library
* Refactored async_add_platform to move IO out to avoid heavy yield usage
* Allow exposing sensors as temperature or humidity as 'climate' to Google Assistant
* Fixed hound
* Fixed hound
* Handled correctly unit of measurement to fix humidity
* Fixed temperature conversion for Google climate components
* Fixed temperature conversion for Google climate components
* Fixed indentation
* Fixed hound
* Fixed tests
* Fixed conversion and unit tests
* Fix sync for custom unit temperature
* Implemented requested changes
* Fix hound
* Fix linting errors
* Added success tests for sensors as climate
* Fix lint errors
The sensors are meant to be put on windows to shut down the heating when
windows are open. Having 'window' device class instead of 'opening' is
much more logical here.
* Change 'on' to 'heat' as fallback thermostat mode
'on' isn't recognised as a mode by Google Assistant, rather is used as a method to return a thermostat to a previous mode. In the case where a thermostat doesn't support the standard google modes (e.g. A homematic radiator thermostat) this means the set_temperature doesn't get returned to the user on a request.
* Update test_google_assistant.py
Add waterfurnace platform
This adds support for waterfurnace geothermal systems. This is
implemented as a component as there will eventually be some active
control elements. This is not done as a climate platform because
geothermal systems work best when set at a constant temperature as
they are tuned to keep within 0.5 degrees F of a setpoint, and large
temperature shifts are slow and expensive.
This is done in the Data + Sensors model, with the Data component
having a regular update thread. That thread needs to call the read()
function at least every 30 seconds otherwise the underlying websocket
is closed by the server.
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Updated requirements_all.txt with gen_requirements_app.py
* Pylint fix: No space allowed around keyword argument assignment
* PR review changes
* Moved auto setup from platforms to ihc component
* Do no auto setup if there are no IHC products found
* Changes from PR review
* Updated bluepy to version 1.1.4 as some issues with the native code were fixed there.
* Miflora - Added support for bluepy backend.
* miflora - now using bluepy backend on linux platforms
* fixed pylint findings
* miflora now using bluepy as default bluetooth backend and gatttool as fallback
* fixed hound complaints
* fixed pylint warning
* updated requirements
* Update miflora.py
* Make Google TTS secure
I noticed that my TTS queries were showing up in the log on my router, so I was curious if there was a way to make it secure. A quick search showed people using https instead of http (https://stackoverflow.com/questions/32053442/google-translate-tts-api-blocked), so I figure that should work. I am using hass.io, so I'm not actually sure how to test this, but its a pretty simple change.
* Fix the tts test.
* Added option to create a group for the plant and all of it's sensors so that they appear together in the UI
* fixed warnings from the hound
* added check for min_brightness over several days
* fixed hound complaints
* 1) added missing dependency on recorder
2) using group.Group instead of hass.states.async_set as requested by @pvizeli
* fixed pylint error in docstring
* changed the way the groups are created
* fixed requirements issue
* Changed the way the groups are implemented. This is proposal number 4...
* Data read from recorder only on startup.
We now only store one data point per day. If a recorder is configured, this data is initialized from the database. If not the list is empty on startup.
* added missing documentation
* fixed typo in comment
* removed group fature
* added group dependency since it's still needed
* fixed bug: now "None" is no longer added to the DailyHistory
* now also outputting unit of measurement if defined by the sensors
* removed iconss
* fixed line length
* Implemented changes requested in code reviews.
These changes affect the interface to the UI:
* renamed attribute for units of measurement to "unit_of_measurement_dict"
* renamed attribute for maximum in brightness history to "max_brightness"
* only loading the history if a brightness sensor was configured
* fixed testcase
* fixed stupid bug in check of brightness history
Also added test for this bug
* added missing docstring
* Fixed sporadic failure in test case.
Sometimes the component was created before the data was stored in the history. This lead to an empty history being read.
* removed unused import statement in testcase
* reverted change to test case
* Changed startup behavior of the component.
No failed tests after 20 local test runs.
* added missing docstring
* fixed tests
* added hass.start() to Setup
* fixed call parameters in constructor
* added time.sleep
* removed sleep
* fixed typo in variable name
* disabled loading from database as it's not stable at the moment and nobody knows why :(
* fixed flake8
* now using pytest.mark.skipif to skip test
* add pyhomematic support for ip and tiltable covers
* use cached data in current_cover_tilt_position
* check for existance not for None
* reformatting
* check node for LEVEL_2
* Service for setting a fixed scene introduced.
Fixes https://github.com/syssi/philipslight/issues/6.
Fixes https://github.com/home-assistant/home-assistant/issues/10458.
* Service description added.
* Typo fixed.
* Error message updated and naming improved.
* Name ("scene") of the method parameter aligned.
* Hound error fixed: Spaces removed.
* async_setup_platform method simplified.
* Lazy loading of service descriptions.
* Unused import removed.
* Implemented event_data_template
* The hound does not like my indentation
* Added passed variables to tests for event and svc template calls
* Moved recursive function to template.py
* Update template.py
* Update template.py
* Cleaned up service.py and fixed unit tests
* Blank lines
* Removed stray logger statement
* Blank lines again
* Signal callback isnt JSON serializable so it has to be removed before saving to conf
* Remove filtered events list which is not a part of component configuration
* Added support for TekSavvy bandwidth sensor
* Variable name fix
* Units are Gigabytes and not Gigabits
* Change REST calls to use asyncio
* houndci violation fix
* pylint fix
* Fix for code review
* Import order asyncxxx:wq
* Tweak docstrings and log message
* Add 'last' type to min/max sensor
Now supports types: min, max, mean, last
'last' is the most recently received value from all tracked entities.
* Min/max sensor 'last' type test
* Fix min/max sensor 'last' test
* Use bluetooth_le source_type, if location was changed by beacon
* No reason to do nested ifs
* Added tests for source_type on owntracks
* Fixed The Hound
* Added test and fixed bug surfaced by test
* Wemo Dimmer Support
Add support for the Wemo Dimmer Switch
* Add newline at end of file
Re: findings from hound
* Syntax for the hound
Sorry for the excess edits, new to python
* Change order of Models
Fixed order back to ABC order
* Changes as requested
I made the changes I was comfortable with at this point, the dimmer addition now very closely mirrors what is under the switch component, at least as far as the parts necessary for the dimmer.
Any changes past these with regards to the subscription registry / callback info is probably going to be over my head, but I will try to look deeper at them if required.
* Remove unnecessary lines
Removed self.schedule_update_ha_state() from turn off / turn on
* Remove update(self)
Removed update method
* Move subscription to async_added_to_hass
* Move subscription.
* Clean up.
* Wait until the job in the executor is done
* Run gen_requirements_all script
* Only update instance attributes via callback
* mychevy: added basic mychevy component
This implements a component using the mychevy library (which utilizes
selenium to webscrape the mychevy website for onstar for your
car). The architecture works by having a background thread doing
periodic polling of the website, and updating the sensors when new
data is found.
This requires rather more setup than most platforms, as you need
working selenium. Instructions will be provided on the component
list. All the sensors are spawned and coordinated from a single "hub"
as they are really just attributes of the same web scraping session.
* mychevy: only poll every 30 minutes
* mychevy: update sensors
* mychevy: better error handling
* mychevy: tweaking for refactor
* mychevy: bump version to handle odometer > 1000
* mychevy: great sensor reorg
* mychevy: add binary sensors
* mychevy: bump mychevy requirement
* mychevy: use dispatcher
Instead of directly modifying the sensors, this lets us use a
dispatcher to have sensors pull information from the car object when
there is a relevant update for them.
* mychevy: remove from coverage
* mychevy: dedicated constants for dispatch signals
This makes the dispatch signals dedicated topics, and fixes updating
the state on the sensors so that they are correctly updated.
* mychevy: updated with comments from martinhjelmare
* mychevy: set battery icon based with helper function
* Address additional review feedback
* Address additional review comments
* Added snips.say and snips.say_action services
* Added snips.say and snips.say_action services
* Merged services.yaml changes I missed
* added tests for new service configs
* Woof
* Woof Woof
* Changed attribute names to follow hass standards.
* updated test_snips with new attribute names
* Strip off the RTS/IO ID from the entity ID
* Ignore exception thrown when the device does not provide an active state
* Send actions with a label for easier identification in the Tahoma log
* Linting
* Strip off the RTS/IO ID from the entity ID, take 2
As per suggestions, let HA do the standard initialization and assign
an appropriate entity_id, instead of overriding it with the lengthy
unique_id coming from the TaHoma devices.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
- fixed some style issues with too long lines
* Hyperion: Add brightness, HDMI and effect support
- fixed some more indentation style issues
* Hyperion: Add brightness, HDMI and effect support
- yet more fixed visuel indent issues
* Hyperion: Add brightness, HDMI and effect support
- more visuel indents
* Hyperion: Add brightness, HDMI and effect support
- fixed invalid variable "A"
* Hyperion: Add brightness, HDMI and effect support
- remove unnececary brackets
- specify specific exceptions
* correct changing state holding attributes during a service method
Proccesed the comments of @MartinHjelmare: https://github.com/home-assistant/home-assistant/pull/11543#pullrequestreview-88328659
* indent correction
corrected tab instead of 4 spaces
* Hyperion: Add brightness, HDMI and effect support
- changed 'none' to None
- renamed "self._skip_check" to "self._skip_update"
* Add brightness, HDMI and effect support
changed checking if a list is empty from "list == []" to "not list"
* Adding support for Lutron Radio RA2 shades as cover components.
* Adding initial version of the Lutron shades component.
* Fixed line-length violation detected by Hound.
* Added snips.say and snips.say_action services
* Added snips.say and snips.say_action services
* Merged services.yaml changes I missed
* added tests for new service configs
* Woof
* Woof Woof
* Changed attribute names to follow hass standards.
* updated test_snips with new attribute names
* Added support for enable/disable motion detection
* Changed name of variable for exception, lint error
* Moved motion_detection_enabled property to the other properties
* Fix error when name is non-latin script
When the name is non-latin script (e.g. Japanese), slugify returns empty string and causes failure in a later stage. This commit fixes the issue by using default name.
* Add test
* Make the order shown in the history component match the ordering given in the configuration of included entities (if any)
* return the sorted result
* optimize sorting. since entities only appear once, we can break from a search on first find, and no copy of the list is needed
* Changed device type of media player and cover to switch
Covers and media players should not be of device type 'light'. Example: If user requests all lights to switch to off, covers are closed and media players are affected too.
* Fix test
* Make the rpi_rf component thread-safe
The previous implementation suffered from race conditions when two rpi_rf switches are triggered at the same time. This implementation uses an RLock to give one thread at a time exclusive access to the rfdevice object.
* cleanup
* fix lint
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
If the `google_assistant` key exists in the config but has no
`entity_config` key under it you'll get an error.
```
File "/Users/pkates/src/home-assistant/homeassistant/components/google_assistant/http.py", line 51, in is_exposed
entity_config.get(entity.entity_id, {}).get(CONF_EXPOSE)
AttributeError: 'NoneType' object has no attribute 'get'
```
* Add 2 media_player services and 1 custom service to Squeezebox platform
* Fix pylint error
* Remove apostrophe in example
* Split method into command and parameters
* Fix Lint error
* Switch the ZoneMinder event sensor over to use the consoleEvents API, and add monitored_conditions for 'hour', 'day', 'week', 'month' and 'all'. 'all' is enabled by default to provide backward compatibility with the old behaviour.
* - Switch to new string formatting
- Remove redundant validator
* De-lint
* trying to rework device discovery. now the main component will do the getlinked and pass it to the sub-components. no longer any config needed other than what is needed to connect to the hub. device names are no longer stored. core team told us to stop using configurator to ask for names. there should be a way to set names in hass...possibly this https://home-assistant.io/docs/configuration/customizing-devices/
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Fixing Rebase Conflicts
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Update Insteon_Local for performance improvements
* Fix errors from get_linked
* Fix typo
* Requested changes
* Fix spacing
* Clean up
* Requested Changes
* Add options feature to Baidu TTS.
Add options feature: supported_options() and default_options() added, get_tts_audio updated to accommodate options.
* Add options feature to Baidu TTS.
Add options feature: supported_options() and default_options() added, get_tts_audio updated to accommodate options.
* Fix style
* Fix style
Change the order of content of lists and dictionaries.
* Fix style
Changed order of imports, and fixed grammar errors.
For example all metrics with unit % match humidity.
This generate correct metrics like this
# HELP nut_ups_battery_charge sensor.nut_ups_battery_charge
# TYPE nut_ups_battery_charge gauge
nut_ups_battery_charge{entity="sensor.nut_ups_battery_charge",friendly_name="NUT UPS Battery Charge"} 98.0
nut_ups_battery_charge{entity="sensor.nut_ups_battery_charge_2",friendly_name="NUT UPS Battery Charge"} 97.0
* Extended sensor alpha_vantage
* Improved error handling if symbol is not found. Now we add the symbols that were found,
* Added option to give names and currencies to symbols.
* Added support to read foreign exchange information.
* Icons are selected based on the currency (where MDI has a matching icon)
* added missing line at the end of the file...
* renamed variable as required by pylint
* Fix typos, ordering, and style
* Connection to mochad occasionally stalls on RPi and CM19A. Reconnect one switch send command.
* Formatting and exception hanling fixes
* Moved import inside the method. Logging outside the try-catch.
* Tailing whitespaces.
* MockDependency on pymochad in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* cleaned unused import
* lint issue fixed
* pylint issue fixed
* New features for Owntracks device_tracker
- Supporting a mapping of region names in OT to zones in HA, allowing
separate namespaces in both applications. This is especially helpful
if using one OT instance to update geofences for multiple homes.
- Creating a setting to ignore all location updates, allowing users to
rely completely on enter and leave events. I have personally always
used OT integrations with home automation this way and find it the
most reliable.
- Allowing the OT topic to be overridden in configuration
* Fixing configuration of MQTT topic, related tests
* Tests for Owntracks events_only feature
* Tests for customizing mqtt topic, region mapping
* Fixing _parse and http for owntracks custom topic
* Making tests more thorough and cleaning up lint
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
Add the amount of remaining time before a timer is finished in its state attributes, so that it is received when fetching a timer state.
In my particular case, it allows me to correctly implement a UI for a timer when it is paused and when the UI didn't received the pause state change (which happens when the UI is started after the pause). In this case, it is impossible to show the remaining amount of time before the timer ends.
* Fix time functions would throw errors in python scripts
* Added unit test for time.strptime, change variable name to satisfy lint
* Added docstring for time attribute wrapper method to satisfy lint
* Fixed line too long lint problem
* Add new iGlo component
* Missing comma
Add extra blank lines
* Dont change state in turn_on
Remove unused variables
Update before add
* Fixing some lint issues
* Add toucline platform
* Fix bugs suggested by houndci-bot
* Fix bugs suggested by houndci-bot
* Fix style based on comments and lint
* Remove target temperature
* Fix unexpected EOF
* Fix unexpected EOF
* Fix wrongfully named numberOfDevices variable
* Add target temperature
* Update requirements_all.txt
* Change after review
* Add supported features
* Remove update in constructor
* Set member variables to none in constructor
* Minor changes
* Don't duplicate html5 registrations
If a registration is posted and another registration with the same
endpoint URL exists, update that one instead. That way, we preserve
the device name that has been configured. The previous behavior used to
append 'unnamed device' registrations over and over, leading to
multiple copies of the same registration. The endpoint URL is unique per
service worker so it is safe to update matching registrations.
* Refactor html5 registration view to not write json in the event loop
Leak sensors were using the "wet" node as a negative node, which prevented them from ever gettng a Dry status unless the user pressed the button on the hardware after every Hass reboot.
This change ignores the Wet node, as it is just always the exact inverse of the Dry node. We don't need to watch both.
* Improve support for multiple Hue bridges with lights that have the same id.
The old code pre-refactoring kept a per-bridge list of lights in a closure; my refactoring moved that to hass.data, which is convenient but caused them to conflict with each other.
Fixes#11183
* Update test_hue.py
* Fix detection of if a negative node is in use
Fix a problem where every negative node gets detected as in-use. Code was not checking the correct property.
* Allow protected access
* Call update on Sesame devices to cache initial state
* Switch to using async_add_devices
* Fix line length
* Fix Lint errors
* Fix more Lint errors
* Cache pysesame properties
* Updates from CR feedback
* Reconnect to alarmdecoder on disconnect
* Use track_point_in_time instead of call_later
* use alarmdecoder 1.13.2 which has a more robust reconnection fix
* Updated generic thermostat to respect operation_mode and added away mode
* Updated tests to include away mode and corrected init problem for sensor state
Added more tests to improve coverage and corrected again lint errors
Fixed new test by moving to correct package
Fixed bug not restoring away mode on restart
* Added support for idle on interface through state
* Added back initial_operation_mode and modified away_temp to be only one for now
* Fixed houndci-bot errors
* Added back check for None on restore temperature
* Fixed failing tests as well
* Removed unused definitions from tests
* Added use case for no initial temperature and no previously saved temperature
* Added Daikin climate component
* Fixed tox & hound
* Place up the REQUIREMENTS var
* Update .coveragerc
* Removed unused customization
* Prevent setting invalid operation state
* Fixed hound
* Small refactor according to code review
* Fixed latest code review comments
* Used host instead of ip_address
* No real change
* No real change
* Fixed lint errors
* More pylint fixes
* Shush Hound
* Applied suggested changes for temperature & humidity settings
* Fixed hound
* Fixed upper case texts
* Fixed hound
* Fixed hound
* Fixed hound
* Removed humidity since even the device has the feature it cant be set from API
* Code review requested changes
* Fixed hound
* Fixed hound
* Trigger update after adding device
* Added Daikin sensors
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed coverage decrease issue
* Do less API calls and fixed Travis failures
* Distributed code from platform to climate and sensor componenets
* Rename sensor state to device_attribute
* Fixed hound
* Updated requirements
* Simplified code
* Implemented requested changes
* Forgot one change
* Don't allow customizing temperature unit and take it from hass (FOR NOW)
* Additional code review changes applied
* Condensed import even more
* Simplify condition check
* Reordered imports
* Disabled autodiscovery FOR NOW :(
* Give more suggestive names to sensors
* fix: hmip-etrv-2 now working with homeassistant (see also pull request at pyhomematic)
* fix linting issue and typo
* address comment @pvizeli
* Only use cached data in current operation mode
* fix linting issue
* Updated plexapi to 3.0.5
* Removed removed server obj that was being used for the media URL generation as .url() is available in self._session
seasons() no longer exists -> renamed to season()
season() returns obj not list so corrected
season.index returns int, cast to str to zerofill
* Fixed Linting
* Account for User-Agent being non-existent, causing a TypeError
* Actually fix case of no user-agent with last resort
* Return es5 as last resort
* Update __init__.py
* Update __init__.py
* Do not leave remember the milk config file behind
* Fix exception in service causing service timeout
* Change max service timeout to 9 to catch services timing out
* Fix Google Sync service test
* Update and pin test requirements
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
Reverts energy and power unit conversions added in #10979 as they break
early devices.
A proper fix should be implemented in the pyhs100 library which should
return common units across all devices/firmwares.
* Remember the Milk - updating and completing tasks
Added new feature so that tasks can be updated and completed.
For this feature a task id must be set when creating the task.
* fixed hould complaints
* fixed review comments by @MartinHjelmare
* removed unnecessary check as proposed by @MartinHjelmare
* Support for EcoNet water heaters.
* Fixed requested changes.
* Added logging when temp or operation mode are None
* More fixes from PR review.
* Updated pyeconet version to fix natural gas water heater error. Last PR review fix.
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* Correct units used in TP-Link energy monioring
- Energy is measured in kWh for swtches
- Power is reported in mW for bulbs
- Energy is reported in Wh for bulbs
* TP-Ling energy: store units in attribute names
Stores the unit in the attrbute names for TP-Link devices that support
energy monitoring.
* Allow disabling the DoorBird camera live view
* Support for push notifications from DoorBird devices
* use DoorBirdPy 0.1.1 instead of 0.1.0
* Fix lint errors in DoorBird binary sensor
* Change DoorBird push notifications from binary sensor to event
* Remove DoorBird camera options
* use DoorBirdPy 0.1.2 to fix history image urls
* clean up doorbird event code and remove unused doorbird camera imports
* use async for doorbird doorbell events
* Minor changes
* Update file header
* Fix my mess
* Fix docstring
* add required files
* add sochain sensor
* add missing schema
* end first sentence with a period to make travis happy
* upgrade to python-sochain-api 0.0.2 and use asyncio
* add missing _LOGGER and fix long line
* move object setup to async_setup_platform
* rename chainSo variable to chainso
* Removing need for separate Egardiaserver setup
* Fixing linting errors
* Updating egardia component based on review
* Updating egardia component based on review
* Updating egardia component based on review
* Removed return False twice based on review
Leak sensors were using the "wet" node as a negative node, which prevented them from ever gettng a Dry status unless the user pressed the button on the hardware after every Hass reboot.
This change ignores the Wet node, as it is just always the exact inverse of the Dry node. We don't need to watch both.
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Enable more alarm decoder attributes, including chime status and ready status
* Expose chime service in the alarm decoder component
* Fix line length linting issue
* Fix spacing lint issue
* Update PR based on reviewer requests
* Update based on linting catches
* Fix descriptions include from async to sync
* Store raw state of RF sensors from alarmdecoder
* Fix resync. Fix issue with RFID not being truly optional
* Breakdown RF attributes per bit
* Preserve import style
* alexa: Add handling for covers
Covers don't support either cover.turn_on or homeassistant.turn_on so
use cover.[open|close]_cover.
* alexa: Add tests for covers
* Cleaned up '_clear_media()'
* Moved media Type to new method
* renamed "clear_media()' to ' clear_media_details()'
reset 'app_name' (Library Name) in clear_media_details
moved thumbs to '_set_media_image()'
* Moved playback info into setmedia type as it was just used for the next anyway
* Moved library name & image download to only happen if session and player active as else no point anyway
* Fixed Linting issue
* Some tweaks to clean up unintended complexity
* Removed redundant declarations
* Fixed whitespace
* Revert "Fixed whitespace"
This reverts commit 0985445c478f42090d0ea9945b8ebc974ab983dc.
* Revert "Removed redundant declarations"
This reverts commit 6f9d5a85b03efffb4bca44613bcc45c3a71677cc.
* Improve support for multiple Hue bridges with lights that have the same id.
The old code pre-refactoring kept a per-bridge list of lights in a closure; my refactoring moved that to hass.data, which is convenient but caused them to conflict with each other.
Fixes#11183
* Update test_hue.py
* Call update on Sesame devices to cache initial state
* Switch to using async_add_devices
* Fix line length
* Fix Lint errors
* Fix more Lint errors
* Cache pysesame properties
* Updates from CR feedback
* added functionality to save/restore snapshots to monoprice platform
* renamed monoprice_snapshot, monoprice_restore to snapshot, restore
This is to simplify refactoring of snapshot/restore functionality for monoprice, snapcast and sonos in the future
* Revert "Adding MotionIP to BinarySensors for HMIP-SMI (#11268)"
This reverts commit c94cc34a8f.
* Revert "Bugfix: 10509 - http is hard coded in plex sensor (#11072)"
This reverts commit 901d4b5489.
* Revert "Fix handling zero values for state_on/state_off (#11264)"
This reverts commit 2e4e3a42cc.
* Revert "Fix inverted sensors on the concord232 binary sensor component (#11261)"
This reverts commit b866687cd7.
* Revert "Proper Steam game names and small fixes (#11182)"
This reverts commit 7faa94046c.
* Revert "Bugfix homematic available modus (#11256)"
This reverts commit 1d579587c1.
* Revert "Fix detection of if a negative node is in use (#11255)"
This reverts commit b28bfad496.
* Revert "added myself to become code owner for miflora and plant (#11251)"
This reverts commit e0682044f0.
* Revert "Add workaround for running tox on Windows platforms (#11188)"
This reverts commit 81f1a65fae.
* Revert "Upgrade to new miflora version 0.2.0 (#11250)"
This reverts commit 8efc4b5ba9.
* Revert "homematic: add username and password to interface config schema (#11214)"
This reverts commit b4e2537de3.
* Revert "Backup configuration files before overwriting (#11216)"
This reverts commit 90e25a6dfb.
* Adding MotionIP to BinarySensors for HMIP-SMI
My HmIP-SMI (Homematic IP Motion Sensor) only shows "ILLUMINATION" and no MOTION, because the binary values are not recognized. The "old" homematic-motion detectors are working well showing motion, too.
I found out that "MotionIP" was missing at the binary_sensors - after adding "Motion" and "Motion Detection Activated" are shown.
* Removed trailing blanks
removed trailing blanks from my previous change
* Use constant for offline state
* Use constant for no game name
* Rename trade and play constant their proper names
Trade and Play are not the correct names for the states. For instance
Play might be seens as the user is actually is playing, which is not
correct as there is no such state is returned from the Steam API.
Just having "trade" does not say much about what is happening and
might be misintepreted that the user is currently trading, which is not
correct either.
We instead use the names from the underlying library for naming the
states [1]
[1] 2e518ad84f/steam/user.py (L109)
* Get the proper game name if no extra info is given from the api
The third `current_game` parameter that was used before hold
extra information about the game that is being played. This might
contain the game name, it might also be empty. The correct way to
get the game name is to fetch it from the API depending on the
game id that might be returned in the `current_game` attribute if
the user is playing a game.
To not break existing implementations we keep the functionality
to first go with the extra information and only then fetch the proper
game name.
* Refactor getting game name to its own function
This cleans up the code and removed "ugly" else statements
from the sensor and makes the game fetching easier to read.
* Let state constant values be lower snake case
* Return None instead of 'None' when no current game exists
* Initialize steam app list only once to benefit form caching
* Return None as state attributes if no current game is present
* Fix detection of if a negative node is in use
Fix a problem where every negative node gets detected as in-use. Code was not checking the correct property.
* Allow protected access
* Extend Threshold binary sensor to support ranges
- Adds support for ranges
- Threshold type (lower, upper, range) is defined by supplied
thresholds (lower, upper)
- Adds verbose status/position relative to threshold as attribute
(position)
* Minor changes (ordering, names, etc.)
* Update name
* Update name
* Fix statistics sensor mean and median when only one sample is available.
With only one data point stddev and variance throw an exception.
This would clear the (valid) mean and median calculations.
Separate the try..catch blocks for one-or-more and two-or-more stats so
that this doesn't happen.
Test this with a new sampling_size_1 test.
* test_statistics trivial whitespace fix
Sonos Playbar and Playbase devices support Night Sound and Speech Enhancement
effects when playing from sources such as a TV. Adds a new service "sonos_set_option"
whichs accepts boolean options to control these audio features.
Sonos Playbar and Playbase devices support Night Sound and Speech Enhancement
effects when playing from sources such as a TV. Adds a new service "sonos_set_option"
whichs accepts boolean options to control these audio features.
* Fix X10 commands for mochad light turn on
This commit attempts to address issues that a lot of people are having
with the x10 light component. Originally this was written to use the
xdim (extended dim) X10 command. However, not every X10 dimmer device
supports the xdim command. Additionally, it turns out the number of
dim/brighness levels the X10 device supports is device specific and
there is no way to detect this (given the mostly 1 way nature of X10)
To address these issues, this commit removes the usage of xdim and
instead relies on using the 'on' command and the 'dim' command. This
should work on all x10 light devices. In an attempt to address the
different dim/brightness levels supported by different devices this
commit also adds a new optional config value, 'brightness_levels', to
specify if it's either 32, 64, or 256. By default 32 levels are used
as this is the normal case and what is documented by mochad.
Fixes#8943
* make code more readable
* fix style
* fix lint
* fix tests
* Fix X10 commands for mochad light turn on
This commit attempts to address issues that a lot of people are having
with the x10 light component. Originally this was written to use the
xdim (extended dim) X10 command. However, not every X10 dimmer device
supports the xdim command. Additionally, it turns out the number of
dim/brighness levels the X10 device supports is device specific and
there is no way to detect this (given the mostly 1 way nature of X10)
To address these issues, this commit removes the usage of xdim and
instead relies on using the 'on' command and the 'dim' command. This
should work on all x10 light devices. In an attempt to address the
different dim/brightness levels supported by different devices this
commit also adds a new optional config value, 'brightness_levels', to
specify if it's either 32, 64, or 256. By default 32 levels are used
as this is the normal case and what is documented by mochad.
Fixes#8943
* make code more readable
* fix style
* fix lint
* fix tests
* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* Allow using more than one keyboard remote
This sets up one thread per keyboard remote, listening for events.
* Remove enclosing block in keyboard_remote
* Remove unnecessary semantic check for keyboard_remote
The current code relies on the assumption that the first invocation will never specify no_throttle=True.
However that puts us in a pickle when writing unit tests: if we had a fictitious:
def setup_platform():
update()
@Throttle(MIN_TIME_BETWEEN_SCANS)
def update():
pass
Then given multiple tests, the second and some of subsequent tests would be throttled (depending on timing).
But we also can't change that code to call `update(no_throttle=True)' because that's not currently accepted.
This diff shouldn't change the visibile behavior of any component, but allows this extra flexibility.
* Add media progress information
* Remove unnecessary comments
* Remove datetime import
* Remove pysonyavr dependency
* Fix doc syntax (D205)
* Lint fix: no-else-return
* Don't attempt to set media progress info if program is None
* Fix Python 3.4 compatibility
* Explicitely depend on pyteleloisirs
* Only update remaining play time when it changed
* Fix floot state table
* Introduce a new Hue component that knows how to talk to a Hue bridge, but doesn't actually set up lights.
* Refactor the hue lights platform to use the HueBridge class from the hue component.
* Reimplement support for multiple bridges
* Auto discover bridges.
* Provide some migration support by showing a persistent notification.
* Address most feedback from code review.
* Call load_platform from inside HueBridge.setup passing the bridge id.
Not only this looks nicer, but it also nicely solves additional bridges being added after initial setup (e.g. pairing a second bridge should work now, I believe it required a restart before).
* Add a unit test for hue_activate_scene
* Address feedback from code review.
* After feedback from @andrey-git I was able to find a way to not import phue in tests, yay!
* Inject a mock phue in a couple of places
* Add support for Logitech UE Smart Radios.
* Removed full stops to please Hound's line limit.
* Updated with requested changes.
* Fix Pylint Flake8 problem.
* Updated with requested changes.
All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* Updated snips to listen on new mqtt topic and use rawValue if value not present in slot
* Too late at night
* Trying to make minor changes via web
* Update test_snips.py
* Update __init__.py
* Updated wrong branch cause I'm a monkey
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* initial commit of shuffle option for sonos
* added test
* Small adjustments to adhere to review requests
* Removed unnessesary setting of variable. Use shuffle state from soco instead
In a case where either (a) an incorrect source name is used, or (b) the
TV isn't currently queryable (e.g. it's off), we get tracebacks because
we assume the source that we are being asked to select exists in
self._source_list.
This makes the lookup code a little more rugged, and adds in a warning
message (in place of the current exception).
* Device tracker for meraki AP
* styles fix
* fix again
* again
* and again :)
* fix hide if away
* docs and optimization
* tests and fixes
* styles
* styles
* styles
* styles
* styles fix. Hope last
* clear track new
* changes
* fix accuracy error and requested changes
* remove meraki from .coveragerc
* tests and minor changes
* remove location
* Generic thermostat restore operation mode
* Test restore operation mode
* Fix trailing whitespace
* Fix line too long
* Fix test duplicate entity_id
* Fix test
* async_added_to_hass modify modify internal state
* Test inital_operation_mode
* More restore state tests
* Fix whitespace
* fix test_custom_setup_param
* Test "None" target temp
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f82385a4a5c66a929af7025c00ed197e86.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Export climate metrics to Prometheus.
This adds climate_state and temperature_c metrics for each climate
device.
* Add more climate states to state_as_number
* check for none
* fix error from no store being set
* typo
* Lint
* fix default as per notes. Lint fix and make closest store None not False
* update default
* check for none
* fix error from no store being set
* typo
* Lint
* fix default as per notes. Lint fix and make closest store None not False
* update default
* Added min and Events sensor types to prometheus
* Updated prometheus client and fixed invalid swith state
* Added metric to count number of times an automation is triggered
* Removed assumption that may not apply to everybody
* Fixed tests
* Updated requirements_test_all
* Fixed unit tests
* Correction of Samsung Power OFF behaviour
Addition of a delay after powering OFF a Samsung TV, this avoid status
update from powering the TV back ON.
Deletion of update() return statement, return value not used.
* Rename self._end_of_power_off_command into self._end_of_power_off
* Removal of unused line break in Samsung TV component
* Add iAlarm support
* Minor fixes to iAlarm
* Rename ialarmpanel to ialarm and add a check for the host value
* corrections in the value validation of ialarm
* add a missing period on ialarm
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* sensor.envirophat: add missing requirement (#7451)
Adding requirements that is not explicitly pulled in by the library
that manages the Enviro pHAT.
* PyPI Openzwave (#7415)
* Remove default zwave config path
PYOZW now has much more comprehensive default handling for the config
path (in src-lib/libopenzwave/libopenzwave.pyx:getConfig()). It looks in
the same place we were looking, plus _many_ more. It will certainly do a
much better job of finding the config files than we will (and will be
updated as the library is changed, so we don't end up chasing it). The
getConfig() method has been there for a while, but was subsntially
improved recently.
This change simply leaves the config_path as None if it is not
specified, which will trigger the default handling in PYOZW.
* Install python-openzwave from PyPI
As of version 0.4, python-openzwave supports installation from PyPI,
which means we can use our 'normal' dependency management tooling to
install it. Yay.
This uses the default 'embed' build (which goes and downloads
statically sources to avoid having to compile anything locally). Check
out the python-openzwave readme for more details.
* Add python-openzwave deps to .travis.yml
Python OpenZwave require the libudev headers to build. This adds the
libudev-dev package to Travis runs via the 'apt' addon for Travis.
Thanks to @MartinHjelmare for this fix.
* Update docker build for PyPI openzwave
Now that PYOZW can be install from PyPI, the docker image build process
can be simplified to remove the explicit compilation of PYOZW.
* Add datadog component (#7158)
* Add datadog component
* Improve test_invalid_config datadog test
* Use assert_setup_component for test setup
* Fix object type for default KNX port
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Fixed breaks cause by manual upstream merge.
* Added one extra blank line to make PyLint happy.
* Switched json_attributes to be a list of keys rather than a boolean.
The value of json_attributes can now be either a comma sepaated list
of key names or a YAML list of key names. Only matching keys in a
retuned JSON dictionary will be mapped to sensor attributes.
Updated test cases to handle json_attributes being a list.
Also fixed two minor issues arrising from manual merge with 0.58 master.
* Added an explicit default value to the json_attributes config entry.
* Removed self.update() from __init__() body.
* Expended unit tests for error cases of json_attributes processing.
* Align quotes
* Refactored WHOIS sensor to resolve assumed key errors
Altered it to now set an attribute key and value only if the attribute
is present in the WHOIS response. This prevents assumed keys (registrar)
from raising a KeyError on WHOIS lookups that don't contain registrar
information (onet.pl, wp.pl, for example).
* Removed non-used self._data
* WHOIS sensor now creates a new local attributes dict and overrides
* Corrected typos, refactored error cases to clear state adn attributes
* Resolved double return and refactored error logging
* Fixing missing en-gb support bug
* Microsoft TTS adding support for rate, volume, pitch and contour.
* Microsoft TTS fixing support for jp-jp.
* Fixing linting error on line 67
* make impossible things possible 🎉
* vacuum.xiaomi_miio: read dnd status properly instead of using imprecise dnd flag from vacuum_state
* vacuum.xiaomi_miio: use miio package instead of mirobo
* check only that wanted calls have taken place, ignore order of calls
* Fix linting issues
* Remove empty line after docstring
* Bugfix trigger state with multible entities
* Fix numeric state
* fix lint
* fix dict
* fix unsub
* fix logic
* fix name
* fix new logic
* add test for state
* add numeric state test for unsub
* add test for multible entities
* Update numeric_state.py
* Update numeric_state.py
* Update state.py
* Fix logic for triple match
* Add clear to numeric state
* clear for state trigger
This reverts commit cadd797200.
As discussed within #10708 we should chose a different implementation. Therefore we should revert this change to avoid a breaking change.
* Implement supported_features for the climate component
* Test supported features
* Convert generic thermostat to supported features
* Max / min temperature are not features
* Fix lint
* Min / max humidity are not features
* Linting
* Remove current temperature / humidity
* Move c-hacker-style constants to boring integers. Booo!
* Refactor all the climate platforms to use the new supported_features
* Force all climate platforms to implement supported_features
* Fix mistakes
* Adapt hive platform
* Move flags into a constant
* Calm the hound
* Add support for local api connection found in TellStick Znet Lite/Pro.
Added auto discovery support for all TelldusLive devices,
changed authentication method. Breaking change!
Upgraded tellduslive dependency
Update CODEOWNERS.
* Close any open configurator when configuration done
* Add support for Telldus Local API via config (#2)
* Updated dependency (addresses issue raised by @rasmusbe in https://github.com/home-assistant/home-assistant/pull/10435#issuecomment-344719714)
* Fix requested changes
* Fixed aliases warning message
* Fixed test cases
* Changing handling for google_assistant groups to treat them as lights - amending to include user info.
* Enable brightness, RGB, etc for groups in Google Assistant
* Revert color/hue/temp settings
* Change servce from light to homeassistant
* Fixed config_units
* Convert from light to switch
* Change group to switch
* Update tests to switch instead of light for group
* Add support for logarithm in templates
This adds a 'log' filter that takes the logarithm of the given value,
with an optional base number. The base defaults to 'e' - the natural
logarithm
* Remove usage of log10 in template filter 'log'
* Add logarithm as a global
This makes it possible to write:
'{{ log(4, 2) }}'
* Update arlo.py
Include variables for custom away mode specification
* fixed line too long style problem
* fix trailing white space
* fix sending away mode command
* system_log improvements
* Don't use ModuleNotFoundError which is 3.6+
* Don't use FrameSummary which was added in 3.5
* Don't trace stack for exception logs
* Handle test error in Python 3.4
* Added ability to only load Ring camera
if the Ring Protect plan is activated.
* Fixed notification for all invalid cameras
* Fixed attribute name
* Using asyncio for persistent notifications
* Make shell_command async
Use `asyncio.subprocess` instead of `subprocess` to make the
`shell_command` component async.
Was able to migrate over existing component and tests without too many
drastic changes.
Retrieving stdout and stderr paves the way for possibly using these in
future feature enhancements.
* Remove trailing comma
* Fix lint errors
* Try to get rid of syntaxerror
* Ignore spurious pylint error
* Implement data write retry for InfluxDB
This adds an optional max_retries parameter to the InfluxDB component
to specify if and how often the component should try to send the data
if the connection failed due to an IOError.
The sending will be scheduled for a retry in 20 seconds as often as the
user specified. This can be handy for flaky getwork connections between
the DB and Homeassistant or outages like daily DSL reconnects.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittest for influx write retries
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add RetryOnError as helper decorator in util
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittests for RetryOnError
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Use RetryOnError decorator in InfluxDB
This replaces the scheduling logic in the InfluxDB component with the
RetryOnError decorator from homeassistant.util
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Make the linters happy
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Implement a queue limit for the retry decorator.
This adds a queue limit to the RetryOnError handler. It limits the
number of calls waiting for be retried. If this number is exceeded,
every new call will discard the oldest one in the queue.
* influxdb: Add the retry queue limit option.
* Make the linter happy.
* Make pylint happy
* Log exception of dropped retry
* Move RetryOnError decorator to influxdb component.
* Fix bug in logging usage
* Fix imports
* Add newlines at the end of files.
* Remove blank line
* Remove blank line
* Creates a AmcresHub object to protect some private attributes on the logs
* Uses hass.data to pass AmcrestHub to components
* Prefer constants
* Removed serializer since it's using hass.data and simplified camera entity constructor
* small cleanup
* Added fan support. Reduced number of calls to the thermostat to a minimum
* Move temp rounding to config schema
* Fixed pep8 errors
* Fix for review comments.
* removed unneeded if block
* Added missing precision attr back
* Fixed pylint errors
* Code review fixes. Fan support by model number.
* Defined circulate state
* Fix unit conversion for Sensibo A/C units
When the Sensibo component was released, there was a provision to not convert the temperature units unless "nativeTemperatureUnit" was returned with the API. I'm not sure if the API changed on Sensibo's side, but I do not get this key passed back with API requests.
This causes my current temperature to be returned in CELSIUS instead of FAHRENHEIT.
Removing this fixes it, and I can confirm the units are shown properly now.
* Update adding comment showing temperature is always in C
Adding another sensor to output the numeber of items in the SABnabd queue. This is an alternative to displaying filesize, just a preference thing, as it is more meaningfull for me the way I use SABnzdb.
Note this is my first time coding on github and I have no idea if I am doing things right, I assume that all I needed to do is add a couple of lines to the sensors available and also another line as to what to extract from the SABnzdb API, in this case I have called the sensor "queue_count" and it gets the value from the noofslots_total which as I understand - each slot is a separate download item.
hope I did this correctly - also I don't have a separate instance of home assistant running for testing so I have no way to test this code (and I don't know how I would switch to the dev channel either). As I said I am a newb!
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
* Implement entity and domain exclude/include for Alexa
* Switch to using generate_filter
* Use proper domain for turn on/off calls except for groups where we must use the generic homeassistant.turn_on/off
* travis fixes
* Untangle
* Lint
* Initial scene support
* Initial fan support
* ordering
* Initial lock support
* Scenes cant be deactivated; Correct the scene display category
* Initial input_boolean support
* Support customization of Alexa discovered entities
* Initial media player support
* Add input_boolean to tests
* Add play/pause/stop/next/previous to media player
* Add missing functions and pylint
* Set manufacturerName to Home Assistant since the value is displayed in app
* Add scene test
* Add fan tests
* Add lock test
* Fix volume logic
* Add volume tests
* settup -> setup
* Remove unused variable
* Set required scene description as per docs
* Allow setting scene category (ACTIVITY_TRIGGER/SCENE_TRIGGER)
* Add alert, automation and group support/tests
* Change display categories to match docs
* simplify down the display category props into a single prop which can be used on any entity
* Fix tests to expect proper display categories
* Add cover support
* sort things
* Use generic homeassistant domain for turn on/off
* test the facebook notification component
* respond to hound feedback
* remove unnecessary line breaks
* parse_qs not needed with requests_mock
* remove facebook notifier from .coveragerc
* Implement entity and domain exclude/include for Alexa
* Switch to using generate_filter
* Use proper domain for turn on/off calls except for groups where we must use the generic homeassistant.turn_on/off
* travis fixes
* Untangle
* Lint
* Initial scene support
* Initial fan support
* ordering
* Initial lock support
* Scenes cant be deactivated; Correct the scene display category
* Initial input_boolean support
* Support customization of Alexa discovered entities
* Initial media player support
* Add input_boolean to tests
* Add play/pause/stop/next/previous to media player
* Add missing functions and pylint
* Set manufacturerName to Home Assistant since the value is displayed in app
* Add scene test
* Add fan tests
* Add lock test
* Fix volume logic
* Add volume tests
* settup -> setup
* Remove unused variable
* Set required scene description as per docs
* Allow setting scene category (ACTIVITY_TRIGGER/SCENE_TRIGGER)
* Add alert, automation and group support/tests
* Change display categories to match docs
* simplify down the display category props into a single prop which can be used on any entity
* Fix tests to expect proper display categories
* Add cover support
* sort things
* Use generic homeassistant domain for turn on/off
* Add loglinefetch for frontend API call
* Too many blank lines
* Review changes
* review changes
* Only return a text
* Use aiohttp
* Don't do I/O in event loop
* Move lines to query and default to 0
* Small fixes
* Added logic to the alexa component for handling slot synonyms
* Moved note with long url to the top of the file
* Just made a tiny url instead of messing with Flake8
* Refactored to be more Pythonic
* Put trailing comma back
This bumps the used snapcast version to 2.0.8 and enables the new
reconnect feature that causes the component to reconnect to a server if
the connection was lost.
This fixes the ned to restart Home Assstant after a snapcast reboot, as
described in issue #10264.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* add support for color temperature and color; also add some extra deviceInfo attributes
* change so that default behaviour doesn't turn off device if the action isn't handled
* add tests
* fix lint
* more lint
* use attributes were applicable
* removed debug logging
* fix unassigned if only None returned
* report more data in QUERY
* better tests for color and temperature
* fixes after dev merge
* remove deviceInfo as not part of a device state (PR #10399)
* fix after merge
* New sensor viaggiatreno.
I've messed up the previous PR so here it is in a new one.
Should include also all corrections from @pvizeli
* fixes from PR 10522
* fixed import order
* requested changes from MartinHjelmare
* Fix ValueError exception
structure = '>{:c}'.format(data_types[register.get(CONF_DATA_TYPE)][register.get(CONF_COUNT)])
give:
ValueError: Unknown format code 'c' for object of type 'str'
* Minor typo
* Unique identity
Use unique ID for generating keys and store them in config. Fallback to
old id so existing installs will still work.
* Remove Timeouts
they don't really work. this should be fixed in pytradfri I think.
* import uuid only when necessary
* more selective import
* lint
* use load_json and save_json from util.json
* remove unnecessary imports
* use async configurator functions
* async configurator calls
* thou shalt not mixup the (a)syncs
* again: no asyncs in the syncs!
last warning...
* Update tradfri.py
* Implementation of `state_template` for the Universal media_player
* add tracking to entities in state template
* use normal config_validation
* fix tests, use defaults in platform schema, remove extra keys
* and test the new option `state_template`
* lint fixes
* no need to check attributes against None
* use `async_added_to_hass` and call `async_track_state_change` from `hass.helpers`
With the default timeout of 10 seconds, the log gets filled up with "component is taking more than 10 seconds" errors.
This should probably be fixed in some other way, but for now this reduces the problem a bit.
* Better int types support
* type
* Added optional register order
* Fix white spaces
* Fix line length
* Fix line too long
* Fix trailing whitespace
* Stylistc code fixes
* Support presence detection using Hitron Coda router
* at least 2 spaces before inline comment
* Update hitron_coda.py
* rewrote authentication code, it actually works now
* make line slightly shorter to comply with hound
* Removed hardcoded IP address
* Fix string formatting, add timeout, and use generator
* Update hitron_coda.py
* Update hitron_coda.py
* Update hitron_coda.py
* typo
* update .coveragerc
* Update stale URL
* Fix and clean lametric
* Add missing DEPENDENCIES in notify platform.
* Remove not needed method in component manager class.
* Don't overwrite notify DOMAIN.
* Return consistently depending on found devices in setup of component.
* Get new token if token expired
* Add debug log for getting new token
* Clean up
* Initial commit for request_sync functionality
* Fixes for Tox results
* Fixed all tox issues and tested locally with GA
* Review comments - api_key, conditional read descriptions
* Add test for service
* telegram_bot: Support for sending videos
Telegram python library has a sendVideo function that can be used
similar to sending photos and documents.
* fix lint issue
* fix grammar
* Add attribute to show who last un/set alarm.
This allows showing the name of the SPC user who last
issued an arm/disarm command and also allows for
automations to depend on this value.
* Optimize
* Update spc.py
* Update spc.py
* fix
* Fix test.
* Fix for removed is_state_attr.
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Update nederlandse_spoorwegen.py
Make departure and arrival platforms available as state attributes
* Update nederlandse_spoorwegen.py
* Update nederlandse_spoorwegen.py
* Add an option to serve ES6 JS to clients
* Rename es6 to latest
* Fixes
* Serve JS vrsions from separate dirs
* Revert websocket API change
* Update frontend to 20171110.0
* websocket: move request to constructor
* Introduce update_hass()
* Introduce media_positions
* Version bump pymusiccast
* Fix: Unnecessary "else" after "return"
* FIX D400: First line should end with a period
* Version bump
Fixes https://github.com/home-assistant/home-assistant/issues/10411
* Improve handling and logging of unsupported owntracks message types
Added generic handlers for message types that are valid but not
supported by the HA component (lwt, beacon, etc.) and for
message types which are invalid. Valid but not supported
messages will now be logged as DEBUG. Invalid messages will
be logged as WARNING.
Supporting single "waypoint" messages in addition to the
roll-up "waypoints" messages.
Added tests around these features.
* Style fixes
* add JSON processing capabilities
* format fixes
* format fixes
* Fix according to @fabaff comment
* reverting last commit to a more sane approach
* docstring...
* still docstring...
* passed script/lint
* downgrade exception
JSONDecodeError was only introduced in Python3.5
Since we are still supporting 3.4 ValueError is the parent class of
JSONDecodeError
* Fix for telegram polling. (added pausing when error occurs)
* fix pylint error.
invalid variable name ( Exception as _e)). Don't understand why as
removing the underscore fails with my local pylint..
* fixing too short variable name.
* moved logic to `check_incoming`
* fix line too long error.
* Simplify
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Add baudrate option
Baudrate is essential!
* line too long
line too long (82 > 79 characters)
* trailing whitespace
* Rename const
* Fix the missing one
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Refactor Neato botvac components as a vacuum
A switch is still use to enable/disable the schedule
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* CI Hound fixes
* Fix lint errors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato vacumm] Add sensor attributes to vacuum
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Remove line breaks and fix docstring
* PR fixes
When lights in the hue component are used with the emulated hue component ATTR_EMULATED_HUE is still being used, which was deprecated by #9382. This updates ATTR_EMULATED_HUE to ATTR_EMULATED_HUE_HIDDEN to improve consistency and stop the deprecation warnings.
* Add sensor platform for luftdaten.info
* Add monitored conditions to platform schema
* Make monitored conditions config obligatory
* Improve inline documentation
* Import first standard libs then 3rd party libs
* Combine resource url using format
* Remove unnecessary try..except block
* Use state “None” instead of STATE_UNKNOWN
* Minor changes incl. removal of unused vars
* Add missing spaces
Value parsing in plant component throws an ValueError if values are given as floats. This commit changes int(value) to int(float(value)) to avoid this error.
* Add EntityFilter helper
* Changes in entityfilter after code review
* Convert recorder to use EntityFilter
* Fix flake/lint errors in recorder
* Update entity filter helper to return function
* Update recorder to use updated entity filter
* Better docstrings in entityfilter
* Update entityfilter.py
* MVP integration with Remember The Milk.
This version offers a service allowing you to create new issues in Remember The Milk.
* fixed pylint issue with import path
* - added files to .coveragerc as the server inerface is hard to test
- added tests for config file handling
* fixed lint error
* added missing docstrings
* removed stray edit
* fixed minor issues reported by @fabaff
* changed naming of the service, so that serveral accounts can be used
* added disclaimer
* moved service description to services.yaml
* fixed blank lines
* fixed structure of configuration
* added comment about httplib2
* renamed internal config file
* improved logging statements
* moved entry in services.yaml into separate folder.
Had to move the component itself as well.
* fixed static analysis findings
* mocked first test case
* fixed bug in config handling, fixed unit tests
* mocked second test case
* fixed line length
* fixed static analysis findings and failing test case
* also renamed file in .coveragerc
* control flow changes as requested by @balloob
* Implement adjustment
* Add color support
* fix lint
* Fix lint & use only RGB
* fix HSB + Test
* Add tests & fix bugs
* add rgb test
* add setColorTemperature
* Add color light support + tests
* Fix color temp
* use kelvin for converting
* use correct calculation
* Added timer component
* Reworked functionality a bit
* Fixed requested change
* Fixed state updates when finished
* Removing expired listeners, added events, changed services
* Added finish service
* Using timedelta parameters in start-service
* Cleanup
* Lint
* Updating state for remaining time
* Removed duration from cancel method
* Renamed service to fix disabled lint
* Some tests (incomplete)
* Relocated service descriptions
* Addressed requested changes
* Adjusted tests, added methods and events
* Added test for finish service, lint
* Code cleanp, using string states
* tzzz... one char...
* Proper usage of restore_state
* Some more cleanup
* Added ability to control when the on command is sent.
* Changed to allow only brightness command
* Code cleanup
* Added test cases for on command mode.
* Added addition test
* Changed brightness options to lower case.
* Fixed case of default value
* Remove default
This commit adds support for the odhcp DHCP server in addition to
dnsmasq. A new configuration option 'dhcp_software' has been added and
allows the user to set the server used (defaults to dnsmasq to not break
existing installations).
* OwnTracks work. Beacon logic and testcases
The existing test cases don't really make clear what is being
tested and the iBeacon / Region / Zone / Tracker thing is all
a bit confused.
I'm distinguishing a fixed-place beacon used to trigger entrance
into an HA zone (as a Region Beacon) from a beacon affixed to a
portable or mobile object (as a Mobile Beacon). The behaviors
and test cases for those usages should be different. A Region Beacon
will be named the same as a Home Assistant Zone and seeing an event
from that beacon should trigger a device tracker update related
to that zone. It would be appropriate, though unnecessary, to
configure the Region Beacon with the GPS coordinates of its static
physical location.
A Mobile Beacon is not named after any HA Zone and seeing the beacon
triggers an update in HA setting the location of the beacon to the
current device_tracker location. In this way, when my_phone sees
the beacon on my_keys, the location of my_keys is set to where
my_phone is. And when my_phone stops seeing my_keys, my_keys location
is the location of my_phone the last time it saw them.
A Mobile Beacon's GPS information should be ignored because it's
almost certain to be incorrect because the beacon moves. In fact,
beacons typcially come configured with lat/lon as 0.0/0.0 so using
the location of the beacon in an update has a nasty habit of
setting you and your keys on the bottom of the Atlantic Ocean.
Leave message handling is changed to treat mobile beacons
differently from region beacons and gps regions.
active beacons should be a set. you shouldn't end up
with multiple "active" entries for the same beacon. Let's
enforce that with the correct data structure.
Added test for real-world bug that is fixed.
A series of mobile beacon and region beacon
enter and leave events could cause a mobile
beacon to stick to the tracking device even
though it had tracked through a "leave" event.
Changed two tests to look at the size
of the 'mobile_beacons_active' structure rather
than at the object which will allow this test
to work with any sort of list, set, etc.
* Removing excess logging and unnecessary try catch.
From review on PR #10183 I've removed some info logging
that was unnecessary and I've made the suggested changes
to an if block and a try/catch.
The play_media parameters are a little bit black magic for the yamaha
platform, this explains what they are in a code comment instead of
having to go look at the yamaha platform itself.
Fixes Bug #10180
* First draft of a remove device service. Fixes https://github.com/home-assistant/home-assistant/issues/9571.
* Add device service introduced. Enables the join permission of the gateway to pair a new sub device within the next 30 seconds.
* Schema validation added and some refactoring.
* A more precise validation of the gw_mac (ffffffffffff vs. ff:ff:ff:ff:ff:ff).
* Persistent notification added to provide some feedback.
* Pylint warning disabled. The methods are used indirectly.
* CODEOWNERS reference updated.
* Add unit test for hddtemp sensor.
* Remove sample fixture and include it in the code.
* Add test to raise coverage.
* Fix bug when host is not reachable.
* Minor code cleanups.
* More code cleanups.
* Added new Clickatell SMS messaging Notify Platform
* Added new Clickatell SMS platform with layout corrections
* Added new Clickatell platform with additional layout corrections
* Added new Clickatell platform with exception handling removed
* Added new Clickatell platform with poor reference removed
* Reversed changes to dev_docker file
* Minor changes
* Add Nederlandse Spoorwegen sensor
* Remove unused 'delay' option.
* Apply requested code reviewed changes
- use constants from const.py
- ensure the configuration is a list
- verify credentials upon platform setup
- verify station input
- add True as second param to add_device
- only call add_device if at least 1 sensor was setup
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Added Base Support for Linode
* Removed unused Attr
* Corrected some Typos
* updated requirements & coveragerc
* added import to prevent var not declared errors in linter
* Fixed Typo
* Added Switch Component for Linode and corrected some errors if data was blank
* Updated api lib to hopefully remove dependancy on enum34
* Fixed Reference error
* fix pylint errors
* Update linode.py
* Update linode.py
* Update linode.py
* Update linode.py
* Add HTTP cache header to proxied media player images
With the resource actually being cacheable, preemptively extend the cache
buster key to prevent hash collisions.
While at it, change the hash from md5 to sha256 for consistency with the
access_token method.
* Remove lint
* Core POC support for polymer i18n
* Add gulp to build_frontend
* Remove frontend build
* Updated translations format
* Eliminate translation namespace from panel names
* Only register translations path in dev mode
* Support for different device types of MIIO switches: Xiaomi Smart WiFi Socket (called Plug), Xiaomi Smart Power Strip and Xiaomi Chuang Mi Plug V1.
* Line too long fixed.
* Trailing whitespace removed.
* Changes based on review.
* Line too long fixed.
* No blank lines allowed after function docstring fixed.
* The underlying library is called python-miio now. Imports and requirements updated.
* TODO comment removed. Travis complains about.
* Blank line removed.
* Code clean-up.
* Revert "Code clean-up."
This reverts commit 96b191c7a6d30df3b2f8a301491ced61c84a49e2.
* Unused platform constant removed.
* Add support for different display currencies in CoinMarkerCap sensor.
* Add test for CoinMarketCap sensor.
* Add test dependency to gen_requirements_all.
* Fix review comments: use string formatting and less string case chanes.
* Recorder exception catch for long state string
* Revert - Recorder exception catch for long state string
* Validate state length at core level
* Revert - this reverts commit 9d6bd017d96f20c10204d9bcb71573e3bc005ee3.
* Revert - Recorder exception catch for long state string
* Fix state TypeError
* Test for long state exception
* Trend sensor now uses linear regression to calculate trend
* Added numpy to trend sensor test requirements
* Added trendline tests
* Trend sensor now has max_samples attribute
* Trend sensor uses utcnow from HA utils
* Trend sensor now completes setup in async_added_to_hass
* Fixed linter issues
* Fixed broken import
* Trend tests make use of max_samples
* Added @asyncio.coroutine decorator to trend update callback
* Update trend.py
* Initial support for SNMP switch
Supports setting integer values
* Resolves styling issues
* Updates requirements
* Remove commented out import
* Changes default community to private. Fixes linting errors.
* More linter fixes and bugfix in #state()
* Refactors the code to make it simpler.
* Add Google Domains component
* Fixes for hound
* Add Google Domains tests
* Fixes for hound
* Clean up Google Domains
* Add timeout to Google Domains
* Remove whitespace from blank lines
* Update google_domains.py
* Update google_domains.py
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Changes
* Updated Requests to 2.18.4
* Updated plexapi to 3.0.3
* Removed function to convert_NA_to_None
* Removed function get_thumb_url
Type changes
* _session.player is now a list players
* na_type deprecated and to be removed
* plexapi has change na to None
Known Issues:
* Player controls currently broken
* Last location (library) stays while player idle
* Username is now Usernames and a list
* Fix for broken controls
* Removed errant print statement
* Removed depecrated na_type
* Updated Plex Sensor to use plexapi 3.0.3
Added support for Token to be used in sensor
Known Issues:
Username and Password broken for Plex Sensor use Token instead for now
* removed TODOs
* Fixes for private access violations
* Removed need for _local_client_fix
* Removed unused import and fixed parens
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Serial number is the only unique identifier, checks are still needed
* No async for setup_device
* Bump axis to 13 in preparation of friday the 13th
* Fix review comments
* Removed async after some discussions with @armills.
It wasn't possible to get past that aiohttp doesnt support digest auth, which makes it impossible to convert the full library at this point in time.
* Xiaomi Air Purifier 2 integration
* Flake8 errors fixed.
Changes based on review.
* Service domain ("fan") updated and services properly prefixed by xiaomi_miio.
* The underlying library is called python-miio now. Imports and requirements updated.
* Version bumped. The underlying library is called python-miio now.
* Fixes#10030. Extented Network Exceptions handling.
* Remove unused import. Replace ex.reason to ex.message to use custom exception instead of HTTPError
* Init commit of new whois sensor
* Updated requirements
* Resolved updated showing expired, added expired attr
* Added missing attribute in init, added whois to coveragerc
* Various PR comment changes
- Now more resiliant to invalid hostnames
- Removed various assumed STATE_UNKOWN setting
- Upfront check for valid hostname preventing the sensor starting with dud
- Resolved unit of measurement Day, Days, None issue
- Datetime formatting now done to iso 8601 standard
- Removed all expired usage, not really that useful
- Unused hass assignment
* More PR comment resolutions
- Resolved the dilemma with hosts / single host per sensor. Now running
single domain per sensor.
- Renamed host(s) to domain
* Moved coveragerc sensor location
* Re-phrased the expiration_date warning
* Resolved assumed updated_date existence
* Resolved missing indent
* Resolved discover_info typo
* Update whois.py
* add eph ember controls
* updates based on review
* remove unused import
* update to new version of pyephember
* added myself to codeowners as requested
* make codeowners alphabetical
* run fixed gen_requirements_all
* Update ephember.py
* Do not include program data in media_title if program data is undefined (None)
* Show thumbnail of currently playing program
* async setup
* Update requirements
* Initial revision of fail2ban sensor
* Verified working, added tests
* Re-factored code so that log reading isn't called for each sensor
* Lint fixes
* Removed errant reset of last ban, added test to verify bans persist through update
* Removed for loop in read_log and replaced with regex per review request
* Refactored update to use current ban array for last ban state
- also was missing return False in timer for default behavior
* Removed CONF_SCAN_INTERVAL from PLATFORM_SCHEMA.extend
- renamed DEFAULT_SCAN_INTERVAL to SCAN_INTERVAL
* SCAN_INTERVAL changed to timedelta
* Force travis rebuild (last build timed out)
* Using compiled regex now
* fixing a typo in the old library.
Should now work with both version 1 and version 2 hub
* version bump
* fix Scene shadowing
* fix requirements. (not sure whether I should commit the other generated files as well ?)
* Test including extra data on a no data trigger
* Match any dicts for default schema for event data
* Fix indentation
* Only check schema if one was configured
The default names for the feeds created by the EmonCMS component are
like 'emoncms1_feedid_10', but
- This is the display name. The ID should be lowercase and underscored,
but the display name should be readable. The ID gets derived from it
and comes out formatted correctly.
- EmonCMS lets you assign names to feeds, so it makes sense to use those
if they exist, rather than feed IDs. The ID is pretty meaningless and
basically means you have to override every name to make it readable.
- Including the ID identifying the EmonCMS instance (i.e. the '1') makes
the name clunkier and would only be useful for people with multiple
EmonCMS instances, which is likely to be an extremely small group since
one hub can run as many feeds as you need it to.
This changes the default behavior but still uses configured 'name' if
it's set, so it won't break the configuration of people who have
customized their feed names in HA config.
* Change persistent notification to avoid long text in entity state
* Tests for changed persistent notification
* Persistent notification state
* Test for component state
* Updated RussoundRNETDevice.update() to call and enhanced function that reduces network traffic
Refer to issue #6 on the Russound project
* Updated RussoundRNETDevice.update() to invoke an enhanced function to reduce network traffic
PLease see issue #6 on the russound project
* Updated REQUIREMENTS to use version 0.1.9 of the Russound component
Please refer to issue #6 on the Russound rnet project
* Corrected some minor style details to satisfy Houndbot
* Update requirements_all.txt
* Add support for multiple disks.
* Fix LINT error.
* Make disk config optional to not break existing installations.
* Change state handling as per request by @fabaff.
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* Update request requirement
Update request requirement from version v2.14.2 to v2.18.4
* Fix dependency vizio integration
3rd patry packages were removed from requests. Changed dependency from requests to urllib3
* forgot =
forgot = when adding the requirement
* re-run script/gen_requirements_all.py
re-run script/gen_requirements_all.py
* Unvendoring urllib3 from requests
In v2.16.0 and newer of requests they unverdored urllib3.
* undefined name 'InsecureRequestWarning'
* Removed requirement to 'urllib3==1.22
* removed import requests
* removed urllib3.exceptions.InsecureRequestWarning
removed urllib3.exceptions.InsecureRequestWarning travis lint
* Added Toon support again
* Forgot about .coveragerc
* Fixed style issues
* More styling and importing fixes
* Implemented the suggestions made by @pvizeli
* The smallest fix possible
* Removed custom names for Toon states
* Fix last push with 2 outdated lines
* Removed HOME and NOT_HOME, moved to just climate states
* Bumped dependency for better handling of smartplugs that don't report power consumption
* Implemented changes as suggested by @balloob
* Rebase, gen_requirements_all.py finally working
* Add emeter attributes.
* Remove unused attributes.
* Rework supported features so it only queries the bulb once.
* Used cached supported_features, catch errors if energy usage not reported.
I noticed the steam component "game" attribute is capitalized. This should be lowercase if I'm not mistaken.
From:
return {'Game': self._game}
To:
return {'game': self._game}
Not sure if i'm doing this correctly... apologizes if I'm not!
* using defusexml ElementTree for safer parsing of untrusted XML data
* move from core dependency to platform specific dependency
* style difference: put back end of list comma in setup.py
* Fix missing timeout for Netatmo binary sensor
This fix also merges timeout and offset because there were the same thing
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Fix lint errors
* Fix style
* added implementation for monoprice 6-zone amplifier. This implementation is based on and very similar to russoun_rnet implementaion
* updated comments and cleaned up code
* updated comments and cleaned up code
* added unit tests
* removed 'name' attribute from platform schema.
* added monoprice.py to .coveragerc
* fixed lint
* fixed lint errors
* fixed lint errors
* added monoprice to requirements_all.txt
* fixed lint errors again
* implemented change requests
* fixed lint error
* added exception handling to setup_platform()
* replaced catchall with SerialException only
* added myself to CODEOWNERS
* fixed weird merge to CODEOWNERS
* Update aioimaplib from v0.7.12 to v0.7.13
Changelog v0.7.13:
[aiolib] adds a connection lost callback [test] imapserver : added APPENDUID response for APPEND cmd [test][fix] imapserver append should add to the connected user mb [test] imapserver : more accurate building of message headers (using python email module)
* run script/gen_requirements_all.py
* http: Add headers key to json[_message]
* Add google_assistant component
This component provides API endpoints for the Actions on Google Smart
Home API to interact with Google Assistant.
* google_assistant: Re-add fan support
* google_assistant: Fix Scene handling
- The way I originally wrote the MAPPING_COMPONENT and the way it's actual
used changed so the comment was updated to match that.
- Use const's in more places
- Handle the ActivateScene command correctly
* google_assistant: Fix flakey compare test
Was failing on 3.4.2 and 3.5, this is more correct anyway.
* google_assistant: Use volume attr for media_player
* Extra check to incoming connections
The incoming connection could be other than self.db_url, because
some 'custom_component' could be making these, and then, if they're not
sqlite3 connections, an error will raise because those haven't the
`dbapi_connection.isolation_level` attrib.
* lint fix
* simplify check: isinstance test only
* Fix load of components without any config from packages
- Add 'None' to the packages config schema validation, to be able to
load components without any more configuration from yaml package files,
like `wake_on_lan`, `media_extractor` and so on.
* test the ability to load components without configuration from packages
* Cloud: connect to cloud
* Fix tests in py34
* Update warrant to 0.5.0
* Differentiate errors between unknown handler vs exception
* Lint
* Respond to cloud message to logout
* Refresh token exception handling
* Swap out bare exception for RuntimeError
* Add more tests
* Fix tests py34
* Correct capitalization inconsistency in DarkSky
All two-word sensors ("Precip Intensity," "Nearest Storm Bearing," etc) in Darksky uses title case for the friendly name of the sensor, with the exception of "Dew point."
* Implement UV Index in Darksky
* Fixed whitespace for Tox compliance
* Add unit for UV Index.
Per recommendation of reviewer, added 'UV Index' as a CONST in const.py, then used that const in both DarkSky and ISY994. It looks like BloomSky might also support UV Index and it should probably be standardized.
* Added uptime sensor for homeassistant
* Fixed pylint and flake8 errors
* Made requested changes from PR
- Fixed stale docstrings
- Changed default state to None
- Added ability for user to use hours or days
* Fixed typo
* Added unit_of_measurement check to test
* Converted to async
- Changed tests to work with async
* Minor updates
* Added TODO to illustrate my intentions
* Resolved linting issue
* Resolved bool or file validation and updated tests
The tests have been updated to include mocks to assert a temp
ca cert exists as it should for the positive tests with an
additional negative test for a file not existing being tested.
* Resolved flake8 linting issues (test docstrings)
* Communication timeout support in modbus hub.
Timeout parameter are taken from configuration and passed to pymodbus constructor.
* CONF_TYPE and CONF_TIMEOUT imported from const.py
* Expose time module in Python Scripts
* Make dt_util available in Python Scripts
* Limit methods in time module
* Add time.mktime
* Limit access to datetime
* Add warning to time.sleep
* Lint
* fix for LocationParseError in netgear platform
* added unit tests for get_scanner()
* fixed houndci-bot warnings
* fixed lint warnings
* fixed lint warnings
* fixed broken test
* removed guard clause from netgear.py
removed all discovery related code from device_tracker
removed unnecessary unit test
* removed discovery related tests
* removed unused import
* removed unused import
* Xiaomi Smart WiFi Socket and Smart Power Strip integration
* Comment updated.
* Blank line removed.
* Typo fixed.
* Version of python-mirobo bumped.
* Version of python-mirobo bumped: Lightweight API changes.
* Additional API changes.
* Library version properly pinned again.
* Platform not ready behavior fixed.
Expose the device model as sensor attribute.
Device initialized log message added. Provides device model, firmware and hardware version.
* Component renamed: switch.xiaomi_plug -> switch.xiaomi_miio
* Revise based on review: Unused code removed. Filename updated.
* Initializing statistics sensor with data from database
* fixed broken test case
* usage of recorder component is now optional, thx to @andrey-git
* added test case for initialize_from_database
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* bump the pyhs100 version and fix api changes
* switch.tplink: avoid I/O during __init__
* initialize _name to None in __init__
* update requirements_all.txt for the new version
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Renamed parameter since the repository_names expects a list
* Refactoring code to synchronous
* Simplified variables names
* Update to 0.12.1 and sensor implementation.
* Removing unnecessary dict gets.
* Added name property to actually use the _name variable.
* Update docstring
* arlo: Add alarm control panel component
Allows importing arlo base stations as an alarm control panel
component in HA. Lets the users configure a custom home mode since
arlo does not have a built-in home mode.
* fix lint and houndci comments
* Use async_update to update the state
Move the state updating code from state() to update() since it does
I/O.
* Do not set state in __init__
Make sure that update is called by passing the second parameter to
async_add_devices.
* Order imports and fix dos-strings
* Add recorder purge service
* Recorder test to match purge config
* Removed purge timer, move service handler to setup, add service description file
* Tests for recorder purge service
* Recorder purge timer rework, add purge service parameter, tests
* Purge service schema change
* Service description change value range
* First cleanup
* Fix name of config
* Allow configuring DSMR5 protocol.
* Give good example.
* Using dev branch until released upstream.
* Update to dsmr_parser supporting v5 arguments.
* Update to latest dmsr parser, preventing exceptions thrown where warnings would suffice.
* Update even more
* Update requirements.
* Update requirements
* * Rename input_slider to input_number
* Update input_number to optionally display slider, input box, or both
* input_number support either input box or slider mode, but not both
* input_number : change service from select_value to set_value
* input_number : add test for mode setting to tests
* Added hysteresis attribute to threshold binary sensor
* Added threshold binary sensor hysteresis test case
* Changed threshold binary sensor property name to be more self explanatory
* Pulled default hysteresis value into top level declaration
* Fixed linter errors
* Fixed additional linter errors
* Move comment to docs
* New climate platform with MQTT
* Use STATE_OFF
* Basic tests for climate.mqtt
* lint
* actualy collect coverage
* First tests and fixes
* Add possibility to receive temperature via MQTT
* Require only either sensor or mqtt topic
* Add mqtt publishing for away mode, hold mode and aux heat.
* Use configurabe on/off payloads
* Add pessimistic mode
* Initialize aux and away with False instead of None
* Remove Sensor
* Use correct scheduling method
* Move all methods to coroutines
If an event contained a datetime.datetime object it would cause an
exception in the Splunk component. Most of the media_player
components do this in their `media_position_updated_at` attribute.
Use the JSONEncoder from homeassistant.remote instead of just using the
standard json.dumps encoder.
Fixes#9590
* Fixed away_mode for Ecobee thermostat. Now away mode is properly turned on using indefinite away hold.
* fixed lint warnings
* fixed lint warnings
* - now it is possible to use float values for ecobee temperature holds
- fixed a bug that caused an exception when temperature hold was set in away mode
- added unit tests for ecobee thermostat
* fixed lint errors
* fixed lint errors
* - Rewrite synology camera by intruducing Api and SurveillanceStation classes to get cameras, motion settings, enable/disable motion detection, etc ...
- Synology camera now shows correct state based on is_recording and is_streaming flag. Also it now supports enable / disable motion detection and show the correct motion detection status
- Newly added Api and SurveillanceStation classes will be moved to a lib but it's here just for review
* - Updated how payload are merged with kwargs so it works with python <3.5
* - Fixed class name conflict
* - Addressed flake8 error
* - Addressed pylint error
* - Moved synology API related code to py-synology lib
- Added py-synology==0.1.1 requirement
- Removed hass from SynologyCamera constructor
* - Updated requirements_all.txt
* - renamed variable back to original
* - Sync call to retrieve camera image should be done in camera_image() instead
* - Sync call to update camera info should be done in update() instead
* - Removed unused import
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* second try on rflink / cover
* no newline at end of file
* changed entity
* fixed comments from pvizeli
* removed :
* removed return 'unknown'
* Fixed comments from Rytilahti
* removed newline
* Reverted to None
* cleanup
* Cleanup
* Initial proposal for the input_datetime
* Linting
* Further linting, don't define time validation twice
* Make pylint *and* flake8 happy at the same time
* Move todos to the PR to make lint happy
* Actually validate the type of date/time
* First testing
* Linting
* Address code review issues
* Code review: Remove forgotten print()s
* Make set_datetime a coroutine
* Create contains_at_least_one_key_value CV method, use it
* Add timestamp to the attributes
* Test and fix corner case where restore data is bogus
* Add FIXME
* Fix date/time setting
* Fix Validation
* Merge date / time validation, add tests
* Simplify service data validation
* No default for initial state, allow 'unknown' as state
* cleanup
* fix schema
* IMAP Unread sensor updated for async and push
* Implement renames suggested in review
* Use async_timeout
* Keep push capability in a variable
* Reword for Hound
* allow customizable action for webos tv turn on as not all models allow for WOL
* trying to fix the houndci-bot
* last few fixes hopefully
* I guess not
* last time!
* This is a breaking change. I have removed the build-in wake-on-lan functionality and have opted for a script which can be a wake-on-lan switch. I have also removed any reference to wol.
* hoping to fix formatting
* linter errors
* Increase Comed timeout since it sometimes takes a long time for the API to respond
* Rewrite ComEd sensor to use asyncio
* Fix whitespace and build issues
* Added new statistic attributes
Added new attributes:
- Cleaning count
- Total cleaning time
- Total cleaning area
- Time left to change main brush, side brush and filter
* Code corrections
Code corrections
* Remove wronge hanging indentation
* Added new attributes
ATTR_MAIN_BRUSH_LEFT
ATTR_SIDE_BRUSH_LEFT
ATTR_FILTER_LEFT
ATTR_CLEANING_COUNT
ATTR_CLEANED_TOTAL_AREA
ATTR_CLEANING_TOTAL_TIME
* Remove trailing white space
* Corrections of the unit test for new attributes
* Hound corrections
* Init self.clean_history, self.consumable_state
* Hound correction
* - Cleaning time and total cleaning time shown in minutes
- Cleaned area and total cleaned area shown in square meters
- Main brush left, side brush left, filter left time shown in hours
- Display of the unit of measurement
* Remove trailing white spaces
* Fixed wrong continued indentation
* Fixed Hound
* Fixed Hound
* Added new statistic attributes
Added new attributes:
- Cleaning count
- Total cleaning time
- Total cleaning area
- Time left to change main brush, side brush and filter
* Code corrections
Code corrections
* Remove wronge hanging indentation
* Init self.clean_history, self.consumable_state
* Hound correction
* Remove UOM
* Merge
* Init self.clean_history, self.consumable_state
* Hound correction
* Init self.clean_history, self.consumable_state
* Hound correction
* Removed double declarations
* MQTT Cover - Add availability_topic for online/offline status
Added topic, configurable payloads, and tests.
* Merge branch 'dev' into mqtt-cover-availability
* Revert "Merge branch 'dev' into mqtt-cover-availability"
This reverts commit 46d29794ba959e0394ff5c9904ae039a6df1d22e.
* Added newline at end of test_mqtt.py
* Fixed lint issue (newline at EOF)
* Fixed lint issue (newline at EOF)
* Updated call signature for other tests
* Fixed availability message callback
* - Added support for ARM_NIGHT for manual_mqtt alarm
* - port "Add post_pending_state attribute to manual alarm_control_panel #9291" to manuql_mqtt
* - port "Fixed manual alarm not re-arm after 2nd trigger #9249" to manuql_mqtt
* - port "Add manual alarm_control_panel pending time per state #9264" to manuql_mqtt
* - Updated test_trigger_with_specific_pending to simulate real scenario e.g. arm the system then trigger
* new geo rss events sensor
* SCAN_INTERVAL instead of DEFAULT_SCAN_INTERVAL
* removed redefinition CONF_SCAN_INTERVAL
* definition of self._name not required
* removed unnecessary check and unnecessary parameter
* changed log levels
* fixed default name not used
* streamlined sensor name and entity id generation, removed unnecessary parameter
* fixed issue for entries without geometry data
* fixed tests after code changes
* simplified code
* simplified code; removed unnecessary imports
* fixed invalid variable name
* shorter sensor name and in turn entity id
* increasing test coverage for previously untested code
* fixed indentation and variable usage
* simplified test code
* merged two similar tests
* fixed an issue if no data could be fetched from external service; added test case for this case
* Add support for multi-entity recent fetch of history. Add graph component
* Rename graph to history_graph. Support fast fetch without current state.
* Address comments
With this optimization we can send a single UDP packet to the light rather
than one packet per zone (up to 80 packets for LIFX Z). This removes a
potential multi-second latency on the frontend color picker.
* MQTT Binary Sensor - Add availability_topic for online/offline status
Added topic, configurable payloads, and tests.
* Relocated state subscribe function
Moved state subscribe function to follow the state listener function.
* Add reload service
* add reload test
* Use global variable
* remove white space ....
* adjust as suggested
* remove annoying white space....
* fix travis
* fix travis, again
* rename Load_scripts to Discover_scripts
Travis complains that "Load_scripts" is an invalid name (I don't know why)
* Update python_script.py
This gets displayed when clicking on the binary sensors. It is
useful to distinguish different devices with the same name (e.g.
the room name) but different types.
The aiolifx 0.6.0 release fixes an issue where an effect color could
remain set after stopping the effect. This only affected multi-zone
lights (i.e. LIFX Z) and only if the effect was stopped by setting
the light brightness or the color (but not both).
The aiolifx 0.6.0 release also defaults end_index to start_index+7,
so we can remove that argument.
Finally, aiolifx_effects 0.1.2 adds support for aiolifx 0.6.0.
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* Bump Axis requirement to v10
Fix issues related to non JSON serializable items and recorder component (8297)
Add support to configure HTTP port (8403)
* Changed local port definition to CONF_PORT
* On request config is now sent to the camera platform as well, and in order better explain what is what the old internal config is now device_config and hass own config is the only one referenced as config
* Missed to add device_config to setup in discovered device
* Bump to V12 that has got a dependency fix
* Update requirements_all
* Add port configuration to automatically discovered devices
Allow setup to pass without Axis being configured in configuration.yaml
* Added satel_integra alarm panel and binary sensor platform
* Fixed several issues after review: import cleanup, reduced messaging levels to debug, other.
* Fixes after review: removed dead code, improved loop, sorted imports.
* Changes after review, not yet working
* Changes after review - wrapped async code, killed ensure_future, moved async_load_platform into jobs
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* Configuration parameter "host" introduced. Will skip the discovery of the host.
* Provide a proper default port. Log message reformatted.
* PyXiaomiGateway version bumped: The new feature was introduced with v0.4.0.
* requirements_all.txt updated.
* Native default for config parameter used.
* Load WebComponent polyfill on header.
On Chrome 53, `document.registerElement` exists but `window.customElements` does not exist.
Fix for Tencent X5 browser on Android(Chrome 53 based).
* Move the block just before app panel loading.
Remove async for new script block.
The DTE Energy Bridge seems to return the current energy
usage randomly in either W or kW. The only way to tell the difference
is if there is a decimal or not in the result.
Also added some tests.
* Basic MQTT vacuum support
* PR feedback
* Support for fan_speed and send_command services
* Fix configurable topics
* Use configurable bools for cleaning/docked/stopped state
* Fix language in docstring
* PR feedback
* Remove duplicate vacuum/state topic defaults
* Fix incorrect template for docked value
* Move direction like default mqtt platfom/components
* fix None on templates
* fix tests
* fix int
* fix tests
* ready to merge
* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* - Enhanced manual alarm_control_panel config so that you can specify different pending time for different alarm state
* - Fixed demo alaram control panel
* - Updated configuration structure for state specific pending times
* - Addressed comment
* Address code review comments
* - Fixed failing tests
- Updated demo alarm component to use new per state pending_time setting
* - Removing previously added comment which might have caused build to fail?
* - moved "copy.deepcopy(config)" out of loop so config is only copied once
* add datetime and support for unpacksequence
add datetime to builtin and support for unpacksequence
a,b = (1,2)
for a,b in [(1,2),(3,4)]
* add test for python_script
* fix test
* restore previous test
restore previous tests, removed by mistake sorry...
* fix test
* Update test_python_script.py
* fix travis
* fix test
* Update test_python_script.py
* Add files via upload
* fix travis...
* Added basic Todoist support
Creating a new platform for Todoist - https://todoist.com
* Added more robust support for creating new custom projects.
This means you can now specify things such as 'all tasks due today', 'all tasks due this week', etc.
* Changed logging from warning to info.
* Added label and comment support.
* Added support for overdue tasks.
* Changed logging to info instead of warning; fixed labels.
* Added ability to filter projects by name.
* Rename 'extra_projects' to 'custom_projects'.
* Updated code to follow proper HASS style guidelines.
* Got new_task service running.
* Update .coveragerc.
* Remove old try-catch block.
This is left over from before we validated the inputs using the service schema.
* Updated to use PLATFORM_SCHEMA.
* Updated component to use Todoist API.
* Removed commented-out code.
This also removes functionality regarding finding out how many comments a task has.
This functionality may be added back in the future.
* Clarified TodoistProjectData, removed fetching comments.
* Fixed bug where projects were grabbing all tasks.
* Fixed bug where due dates were being ignored.
* Removed debug logging.
* Fixed linter errors.
* Fixed Todoist docstring to be in line with HASS' style rules.
* Organized imports.
* Fixed voluptuous schema.
* Moved ID lookups into .
* Moved ID lookups into setup_platform.
* Cleaned up setup_platform a bit.
* Cleaned up Todoist service calls.
* Changed debug logging level.
* Fixed issue with configuration not validating.
* Changed from storing the token to storing an API instance.
* Use dict instead of Project object.
* Updated to use list comprehension where possible.
* Fixed linter errors.
* Use constants instead of literals.
* Changed logging to use old-style string formatting.
* Removed unneeded caching.
* Added comments explaining 'magic' strings.
* Fixed bug where labels were always on the whitelist.
* Fixed linter error.
* Stopped checking whitelist length explicitly.
* Update tradfri.py
## 201709013: set_hex_color() seems not to work in pytradfri api - set_rgb_color() does
## -> changed function set_hex_color() to set_rgb_color()
## tested w. IKEA tradfri GW and zigbee rgb PWM module (dresden elektronik FLS-PP lp)
* Update tradfri.py
Setup:
Home Assistant 0.53.0
pytradfri 2.2
IKEA tradfri gateway fw 1.1.0015
zigbee rgb PWM module (dresden elektronik FLS-PP lp)
Issue:
pytradfri's set_hex_color() does not work for arbitrary colors with the current IKEA tradfri gateway. Only setting rgb hex values (param 5706) of some predefined colors has the desired effect. Others will fall back to one predefined value. I assume, the GW doesn't allow for values deviating from the predefined values.
However, pytradfri's set_rgb_color() does also work for arbitrary colors. Latest pytradfri (2.2/PR51?) will convert rgb to xy and send xy thru the GW (param 5709 and 5710).
-> changed the function used from set_hex_color() to set_rgb_color() in HA's component\light\tradfri
Result:
Full RGB support with arbitrary colors with my setup.
Unfortunately I cannot test tradfri GW with other bulbs (no have hue/lightify bulbs).
___
Predefined colors from <https://github.com/ggravlingen/pytradfri/pull/51>:
this.f3891b = new HashMap();
this.f3891b.put("f5faf6", new C1386c(0.3804d, 0.3804d, "f5faf6", 0.54d));
this.f3891b.put("f1e0b5", new C1386c(0.4599d, 0.4106d, "CCT_LIGHT_NEUTRAL", 0.61d));
this.f3891b.put("efd275", new C1386c(0.5056d, 0.4152d, "efd275", 0.66d));
this.f3891b.put("dcf0f8", new C1386c(0.3221d, 0.3317d, "dcf0f8", 0.45d));
this.f3891b.put("eaf6fb", new C1386c(0.3451d, 0.3451d, "eaf6fb", 0.48d));
this.f3891b.put("f5faf6", new C1386c(0.3804d, 0.3804d, "f5faf6", 0.54d));
this.f3891b.put("f2eccf", new C1386c(0.4369d, 0.4041d, "f2eccf", 0.59d));
this.f3891b.put("CCT_LIGHT_NEUTRAL", new C1386c(0.4599d, 0.4106d, "CCT_LIGHT_NEUTRAL", 0.61d));
this.f3891b.put("efd275", new C1386c(0.5056d, 0.4152d, "efd275", 0.66d));
this.f3891b.put("ebb63e", new C1386c(0.5516d, 0.4075d, "ebb63e", 0.68d));
this.f3891b.put("e78834", new C1386c(0.58d, 0.38d, "e78834", 0.69d));
this.f3891b.put("e57345", new C1386c(0.58d, 0.35d, "e57345", 0.67d));
this.f3891b.put("da5d41", new C1386c(0.62d, 0.34d, "da5d41", 0.7d));
this.f3891b.put("dc4b31", new C1386c(0.66d, 0.32d, "dc4b31", 0.73d));
this.f3891b.put("e491af", new C1386c(0.5d, 0.28d, "e491af", 0.57d));
this.f3891b.put("e8bedd", new C1386c(0.45d, 0.28d, "e8bedd", 0.53d));
this.f3891b.put("d9337c", new C1386c(0.5d, 0.24d, "d9337c", 0.55d));
this.f3891b.put("c984bb", new C1386c(0.34d, 0.19d, "c984bb", 0.38d));
this.f3891b.put("8f2686", new C1386c(0.31d, 0.12d, "8f2686", 0.33d));
this.f3891b.put("4a418a", new C1386c(0.17d, 0.05d, "4a418a", 0.18d));
this.f3891b.put("6c83ba", new C1386c(0.2d, 0.1d, "6c83ba", 0.22d));
this.f3891b.put("a9d62b", new C1386c(0.4099999964237213d, 0.5099999904632568d, "a9d62b", 0.654d));
this.f3891b.put("d6e44b", new C1386c(0.44999998807907104d, 0.4699999988079071d, "d6e44b", 0.65d));
* Add LANG to environment variables
Some componentes, e.g. tradfri, will not work properly unless LANG is an UTF-8 environment.
* Set LC_CTYPE to UTF-8
There's a kind of duplication of functionality between NetDisco and
"xiaomi" component, the latter features its own "discovery" in addition
to general HomeAssistant discovery service, based on NetDisco. As such,
this patch is pretty simple: the only purpose of NetDisco discovery
is "plug and play", "zero configuration" discovery that Xiaomi Gateway
device is present on the local network, and triggering of "xiaomi"
component loading, which then "rediscovers" the gateway using its own
method.
* Allow multiple observations of same entity
Why:
* There may be different probabilities for multiple states of the same
entity.
This change addresses the need by:
* Keeping a list of observations for each entity to check on each state
change of the given entity.
* Adding a numeric id to each observation so that they can be
effectively added and removed from `self.current_obs`.
* Adding a test to confirm functionality.
* fix overzealous indenting
* Added support to enable/disable motion detection for foscam cameras. This support was added in 0.48.1 as a generic service for cameras. Motion detection can be enabled/disabled for foscam cameras with this code-set.
* Fixed the violation identified by hound-bot
* Fixed the comment posted by HoundCI-Bot regarding using imperative mood statement for pydocstyle
* Fixed the error that travis-ci bot found.
* As per comment from @balloob, Instead of directly using the URL to talk to foscam, used a 3rd party foscam library to communicate with it. This library already has support to enable/disable motion detection and also APIs to change the motion detection schedule etc. Need to add more support in the pyfoscam 3rd party library for checking if motion was detected or even if sound was detected. Once that is done, we can add that into HASS as well.
* Lint
* Removed the requests library import which is not used anymore
* Updating requirements_all.txt based on the code-base of home assistant that i have. Generated using the gen_requirements_all.py script
* Updating requirements_all.txt and requirements_test_all.txt generated by gen_requirements_all.py after latest pull from origin/dev
* Updated requirements_all.txt with script
* Updated the foscam camera code to fix lint errors
* Fixed houndci violation
* Updating the foscam library dependency/requirements.
* Fixing the requirements_all file. Somehow when i generated, it generated duplicate entry for the same dependency
Follow [Twitter's guidance](https://dev.twitter.com/rest/reference/post/media/upload-finalize) for media uploads: "If and (only if) the response of the FINALIZE command contains a processing_info field, it may also be necessary to use a STATUS command and wait for it to return success before proceeding to Tweet creation."
* Added support to enable/disable motion detection for foscam cameras. This support was added in 0.48.1 as a generic service for cameras. Motion detection can be enabled/disabled for foscam cameras with this code-set.
* Fixed the violation identified by hound-bot
* Fixed the comment posted by HoundCI-Bot regarding using imperative mood statement for pydocstyle
* Fixed the error that travis-ci bot found.
* As per comment from @balloob, Instead of directly using the URL to talk to foscam, used a 3rd party foscam library to communicate with it. This library already has support to enable/disable motion detection and also APIs to change the motion detection schedule etc. Need to add more support in the pyfoscam 3rd party library for checking if motion was detected or even if sound was detected. Once that is done, we can add that into HASS as well.
* Lint
* Removed the requests library import which is not used anymore
* Updating requirements_all.txt based on the code-base of home assistant that i have. Generated using the gen_requirements_all.py script
* Updating requirements_all.txt and requirements_test_all.txt generated by gen_requirements_all.py after latest pull from origin/dev
* Updated requirements_all.txt with script
* Updated the foscam camera code to fix lint errors
* Fixed houndci violation
* Updating the foscam library dependency/requirements.
* Fixing the requirements_all file. Somehow when i generated, it generated duplicate entry for the same dependency
Follow [Twitter's guidance](https://dev.twitter.com/rest/reference/post/media/upload-finalize) for media uploads: "If and (only if) the response of the FINALIZE command contains a processing_info field, it may also be necessary to use a STATUS command and wait for it to return success before proceeding to Tweet creation."
owntracks (tested on ios version 9.6.3/de_DE) publishes single waypoints under the topic owntracks/<user>/<device>/waypoint (singular).
owntrack publishes a waypoint export (publish) under the topic owntracks/<user>/<device>/waypoints (plural).
the owntracks component did not catch my waypoint export to mqtt, only single waypoint updates (i.e. after editing a waypoint or creating a new one). these single waypoints were rejected „because of missing or malformatted data“. when i changed the WAYPOINT_TOPIC to 'owntracks/{}/{}/waypoints', owntracks imported my published waypoint list, after i triggered it under Setting / Publish Waypoints.
* Added mqtt_statestream component
* Added tests for mqtt_statestream component
* mqtt_statestream: add test for valid new_state
* mqtt_statestream: Don't set initialized state
* mqtt_statestream: Switch to using async_track_state_change
* Cleanup
* Add HTTP Basic auth to RESTful Switch
* Remove redundant hass passing
* Initialize to current state
The state used to be None until the first periodic poll.
This commit refactors async_update so it can be used during setup as well,
allowing the state to start out with the correct value.
* Refactor turn_on/turn_off device communication
* Remove lint
* Fix Travis errors
* Adds the AirVisual air quality sensor platform
* Updated .coveragerc
* Removed some un-needed code
* Adding strangely-necessary pylint disable
* Removing a Python3.5-specific dict combiner method
* Restarting stuck coverage test
* Added units to AQI sensor (to get nice graph)
* Making collaborator-requested changes
* Removing unnecessary parameter from data object
* Adds the AirVisual air quality sensor platform
* Updated .coveragerc
* Removed some un-needed code
* Adding strangely-necessary pylint disable
* Removing a Python3.5-specific dict combiner method
* Restarting stuck coverage test
* Added units to AQI sensor (to get nice graph)
* Making collaborator-requested changes
* Removing unnecessary parameter from data object
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* Optionally disable ssl certificate validity check.
* Fix lines too long.
* Fix formatting.
* Force build CI
* Fix "Method could be a function (no-self-use)"
* Tado Fix#8606
Handle case where 'mode' and 'fanSpeed' are missing JSON. Based on
changes in commit
adfb608f86
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Revert "Expose hue group 0 to HA #8652"
This reverts commit db7fe47ec72a4907f8a59ebfb47bc4a6dfa41e89.
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Changes per review by balloob
1) Use all_lights instead of all_lamps
2) Fix line lengths and trailing whitespace
3) Move "All Hue Lights" to GROUP_NAME_ALL_HUE_LIGHTS constant
* Make "All Hue Lights" a constant
* Fix trailing whitespace
This fixes an issue (#8554) whereby the Honeywell thermostats stopped
working after a period of hours or days. We do this by forgetting the
authorisation token that was sent back to us when we first logged in,
which causes the underlying evohomeclient library to perform the full
login procedure again.
* Bumping pythonegardia package requirement up to .18
* Updating requirements_all to reflect updated pythonegardia package .18
* Catching up with reality and updating egardia.py
Requirements_all reflects updated package requirement for python-egardia of 1.0.20
Otherwise, known services are logged, ignored are logged, but unknown -
not. Logging them is quite helpful for someone working on adding new
discovery service to NetDisco/HA, and would help to decouple NetDisco
library further: another project may use a generic NetDisco library,
and contribute new service to it, which won't be automatically supported
by HA. But logging about it would be a good hint to HA users that they
can look into supporting it.
* flux: fix for when stop_time is after midnight
* flux: fix imports
* flux: add missing check when now is after midnight
* flux: one more try; should fix all use cases now
* flux switch: fix lint
* flux switch: add new tests
* flux switch: fix tests lint
* flux switch: fix tests docstrings
* Adding ZWave CentralScene activation handler.
* Migrated CentralScene logic to node_entity.py
Removed extraneous logging
Modified scene_activated event to send the scene_id and scene_data separately
* Adding unit test for ZWave central scene activation
* Removed return to allow node statistics to update after central scene message is received
* Added configurable timeout for receiver HTTP requests | Additional AVR-X detection based on CommApiVers | Treat Marantz SR6007 - SR6010 as AVR-X device
* timeout value not passed correctly
* [light.tradfri] Support for pytradfri version supporting full white spectrum
* [light.tradfri] Checkout pytradfri master
* Developer docker image adjusted
* [light.tradfri] pytradfri 2.2 support for white spectrum bulbs
* Removed fix already included in dev
* Style adjusted
* pylint false positive overriden
* Review remarks applied (#1)
* make pylint happy
* Review remarks
* Add Tank Utility sensor
* Fix, disable Pylint errors
* Move coverage omission to single platform section
* Do not catch unknown exceptions
* Check for invalid credentials in setup
* Update tank_utility.py
* - Fixes Fitbit error when trying to refresh oauth token
The 3rd python-fitbit module requires an extra kwarg on the FitBit
constructor called refresh_cb. The value should be a function that
accepts one argument token.
This value will be a dictionary with the keys:
'access_token', 'refresh_token', 'expires_at'
This implements a lambda refresh_cb as required by the Fitbit module
to work, however the new token will always be save manually on
every update() call.
* Simplified by calling expires_at instead reading again from dict
* fix not providing device for discovered directvs
This fixes a bug introduced at 6884965c80
Discovered directv boxes would not be instantiated with a DEVICE
parameter.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
* directv: add discovery of RVU clients
If discovery is used with directv, also try to further discover and
configure RVU client set-top boxes by requesting information from a REST
service running on the main directv box/RVU-server.
This commit also disables discovery if any directv configuration is
supplied by the user.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
* components/media_player/directv.py: use hass.data
Use hass.data instead of a global to remember state.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
* unconditionally import requests in directv.py
Requests is a core requirement, so we're okay to import at the top of
the file rather than conditionally / in a function.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
* Bayesian Binary Sensor
Why:
* It would be beneficial to leverage various sensor outputs in a
Bayesian manner in order to sense more complex events.
This change addresses the need by:
* `BayesianBinarySensor` class in
`./homeassistant/components/binary_sensor/bayesian.py`
* Tests in `./tests/components/binary_sensor/test_bayesian.py`
Caveats:
This is my first time in this code-base. I did try to follow conventions
that I was able to find, but I'm sure there will be some issues to
straighten out.
* minor cleanup
* Address reviewer's comments
This change addresses the need by:
* Removing `CONF_SENSOR_CLASS` and its usage in `get_deprecated`.
* Make probability update function a static method, and use single `_`
to match project conventions.
* Address linter failures
* fix `device_class` declaration
* Address Comments
Why:
* Not validating config schema enough.
* Not following common practices for async initialization.
* Naive implementation of Bayes' rule.
This change addresses the need by:
* Improving config validation for observations.
* Moving initialization logic into `async_added_to_hass`.
* Re-configuring Bayesian updates to allow true P|Q usage.
* address linting issues
* Improve DRYness by adding `_update_current_obs` method
* update doc strings and ensure functions are set up properly for async
* Make only 1 state change handle
* fix style
* fix style part 2
* fix lint
* Updated abodepy version to 0.7.1
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Bumped version to 0.8.2. Modified code to work with new constants and properties. Added cover and switch.
* Fixed hound violations.
* Updated to 0.8.3 to fix small bug with standby mode. Fixed comment in cover/abode.py.
* Fix lint issues
* Removed excessive logging. Moved device callback registration to async_added_to_hass. Moved abode controller from global into hass data.
* Removed explicit None from dict.get()
* Move device class into the constructor.
* Changed constant name to platforms.
* Changes as requested.
* Removing stray blank line.
* Added blank line of which I'm not sure how it was removed.
* Updated version to 0.9.0. Fixed motion sensor. Added power_switch_meter device type.
* Update abode.py
* fix lint
* Fix and optimize digitalloggers platform
* Fix line length
* Fix hanging indentation
* Add missing docstring
* Add period to end of docstring
* Add second blank line
* Prevent error when no forecast data was available
Prevent an Error when buienradar data was available, but no forecasted data was retrieved for the requested day.
* Update buienradar.py
* Update buienradar.py
- pyrainbird 0.0.9 allows the override (if ever needed) connection retry/sleep
- Forces state towards the Entity when switching the switches. Gives better UI experience.
* Prevent iCloud exceptions in logfile
With this change ValueError exceptions in the logfile caused by this component will disappear.
These errors are caused by the iCloud API returning an HTTP 450 error and the external lib throwing a ValueError because of it.
A PR has been raised against the external library, but that fix did not yet make it into a new version of the library. This will catch the exception in the mean time.... https://github.com/picklepete/pyicloud/pull/138
* Align log messages
While waiting for a new pyfoscam release, we can fix this for users
just by changing the import. Foscam devices a pretty widely deployed,
so a regression here is definitely no fun.
Fixes Bug #8940
* Prevent iCloud exceptions in logfile
With this change ValueError exceptions in the logfile caused by this component will disappear.
These errors are caused by the iCloud API returning an HTTP 450 error and the external lib throwing a ValueError because of it.
A PR has been raised against the external library, but that fix did not yet make it into a new version of the library. This will catch the exception in the mean time.... https://github.com/picklepete/pyicloud/pull/138
* Align log messages
* Mysensors nodes can be renamed in the config file
* Replace nodes array with dict. Replace whole name of the node.
* Improved iteration on node names
While waiting for a new pyfoscam release, we can fix this for users
just by changing the import. Foscam devices a pretty widely deployed,
so a regression here is definitely no fun.
Fixes Bug #8940
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
* Adds support for the Xiaomi Philips LED Ball and Ceiling Lamp
* Documentation url updated.
* New component to .coveragerc added.
* Unused import removed.
* translate labeled as static method.
* Mixed parameters in log message fixed.
* Order of requirements_all.txt fixed.
* Plattform updated. It's async now.
* Simplifiable if-statement fixed.
* Some more clean-up of unneeded stuff.
* Platform schema updated.
* Component is called xiaomi_philipslight now.
* Requirements all updated.
* Initialization of some variables updated.
* Raise PlatformNotReady exception if light cannot be discovered.
* Import of math removed.
Missing space added.
* Remove unnecessary updates
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
* Emulate set_current_position in cover.template
* Add opportunistic mode
* Prevent another move when cover is already moving. Add tests for opotunistic/timed-delay mode
* Remove timed-move capabilities
* Set init state to unknown
* cleanup template
* Update test_template.py
* Simplisafe unknown status fix
Changed simplisafe-python requirement to 1.0.5 and changed state return
case statements to lower case
* Bump requirements_all.txt
* cast strings to integers for hsv_to_rgb conversion, fixes#6473
* remove type_checking, flake8 does not like that.
* use hsv_to_rgb to convert to correct rgb value
* Support changing the bulb color for tplink smartbulbs, related to #8766
* existence of ATTR_RGB_COLOR in kwargs, not just its existence...
* return modified supported features
* rgb-hsv conversion utils from hass return bogus values (at least for this device), so doing conversions directly with colorsys
* add typing & documentation for color model conversions
* make linters happy
* cast hsv to integer before passing it to the backend library
* make sure the bulb is on before adjusting the other settings
* allow floats as inputs for conversions, return always integers
* use typing hint in the parameter list instead of at assignment
* do not assign local color state inside turn_on, but let update handle doing it
* use forward declaration for typing, fixes travis requirements build hopefully
* rename hsv and rgb
* remove type-checking check, forward declarations should work just fine without it
* disable (broken) pylint warnings, these can be removed after astroid is updated from 1.4.9 to 1.5
* Pilight switch: restore last state after restart
This uses the restore_state helper to set the last known state to
pilight switches when the devices are initialized after a HA
restart.
Without this HA forget the state on every restart and needs to be told
the sttae by retoggling the switches. This can cause unwanted effects
as a switch toggling may emit an RF signal.
* Make hound happy
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Remove entity_id generation as requested in review.
* Make hound happy again.
* fix comments
* fix lint
* Add support for offset for the workday sensor
* Update tests for workday sensor
* Changed from 'offset' to 'days_offset'
* Attributes bugfix (dictionary key variable repeated with different values)
* Add support for Prowl notifications.
* Use HA session handler.
* Simplify http request logic.
* flake
* fix double fetch data
* Remove periods from log messages
* Get full multizone state during registration
We used to rely on the periodic update to get the state of each zone, only
establishing the number of zones during registration. This resulted in errors
if the current state was needed for a partial color change before the first
async_update happened.
Now we do a full update before adding the light. Thus async_update can no
longer assume device.color_zones to be defined and must instead use the
response message to decide the total number of zones.
* Insist on getting the initial state
If a response to the initial state query is lost we used to just carry on.
This resulted in type errors when we next tried to access the undefined state.
After this commit the light is not added before we have the full state.
This scenario mostly happens when something is misbehaving and the type errors
were actually useful in figuring out what happend. So an error message is
logged in their place.
* Remove lint
* Update fitbit.py
Add variable icon for battery status, clean up formatting for resource
names and values
* Update fitbit.py and requirements_all.txt
Fix PR comments and update client
* Update fitbit.py
Add dict map for battery levels and use icon util
* Update ios.py
Clean up battery and charging icons (MDI was missing some versions),
fix minor bug when battery level = 95%
* Update ios.py
Migrated function to battery icon util
* Inital USPS Camera expansion
* Cleanup debugging, add camera change interval
* Change to local nomail image
* Explicitly pass in date
* Move camera date info to model property
* Fix copy typo
* Fix hound line-length
* Fix lint whitespace
* Fix requirements
* Bump myusps version, clarify interval, alter update scheme
* Add units
* Code cleanup, address comments
* Use built-in scan interval, remove nomail image
* Remove logging line
* Add HipChat notify service.
* Change HipChat notify service to use python-simple-hipchat-v2.
* Change HipChat notify service to use hipnotify
* Change HipChat notify service to remove redundant validation
* Update to pyenvisalink 2.2, and remove range validation on zonedump interval.
* Keep using default timer dump variable, only remove minimum check.
* Fix lint issue
* Indentation issue
* Add support for Automatic OAuth2 authentication
* Fix async conversion of configurator
* Rename method for async
* Use hass.components to get configurator component
* Fix typo
* Move session data to hidden directory
* Make configurator callback optional
* Fixed cert_expiry sensor to delay firing on HA startup
* Addressed Travis complaints
* Added imports
* Fixed cert_expiry sensor to delay firing on HA startup
* Changed comment
* Added possibilities to use template in the command_line sensor
* Minor style guideline conforms
* Minor style guideline conforms
* Added new test for template rendering
* Minor style guideline conforms
* Minor style guideline conforms
* Fixed failing testcases
* Fix style violations
* fix code pretty
* Add new device tracker for Huawei Routers.
This was tested with the HG8247H model, used by Vodafone
Portugal for the Fiber service.
* add to .coveragerc; remove import and space
* add comments and fix lint
* rename methods
* huawei_router: add constants to scanner class
* huawei_router: remove lock; use format() in string
* huawei_router: use tupple instead of member only class
* huawei_router: reduce min scan time
* huawei_router: lint
* huawei_router: lint
* huawei_router: add missing lines in imports
* huawei_router: correctly decode string after router firmware update
* Remove things that is done on core now
* LIFX: improve performance of multi-light transitions
To avoid hub overload, the light.turn_on call will change each light
sequentially.
As LIFX has no hub we can safely increase performance by starting all
light transitions concurrently.
* Improve state updates after light changes
The light.turn_on call will set a new state and then immediately read it
back. However, reading the state of a LIFX light right after a state
change can still return the old value.
To handle this situation we have previously delayed the update request a
little while to allow a potential state change to settle. Because light
updates are now run in parallel, this delay might be too short when many
lights are set at once.
This commit introduces a per-light Lock to make it explicit when the
state cannot yet be trusted.
We must then do the state update ourselves. This was already done at the
end of a long transition and that code can be reused for also doing the
update at the start of a transition.
* Add RainMachine switch platform
* Updated requirements_all.txt
* Cleaning up CI and coverage results
* Small update to deal with older pylint
* Fixed small indentation-based error
* Added some more defensive try/except logic around calls
* I'm not a fan of importing a library multiple times :)
* Making PR-requested changes
* Fixed ref to positional parameter
* Attempting to fix broken linting
* Ignoring no-value-for-parameter pylint error
* Implement Roomba fanspeed
* Fix: fan_speed_list is always empty
* Log instead of raising an exception when incorrect fan speed has been provided
* Don't attempt to set any preference if fan speed is invalid
* Initial implementation of Asterisk Mailbox
* Rework asterisk_mbox handler to avoid using the hass.data hash. Fix requirements.
* Handle potential asterisk server disconnect. bump asterisk_mbox requirement to 0.4.0
* Use async method for mp3 fetch from server
* Add http as dependency
* Minor log fix. try to force Travis to rebuild
* Updates based on review
* Fix error handling as per review
* Fix error handling as per review
* Refactor voicemail into mailbox component
* Hide mailbox component from front page
* Add demo for mailbox
* Add tests for mailbox
* Remove asterisk_mbox sensor and replace with a generic mailbox sensor
* Fix linting errors
* Remove mailbox sensor. Remove demo.mp3. Split entity from platform object.
* Update mailbox test
* Update mailbox test
* Use events to indicate state change rather than entity last-updated
* Make mailbox platform calls async. Fix other review concerns
* Rewrite mailbox tests to live at root level and be async. Fixmailbox dependency on http
* Only store number of messages not content in mailbox entity
* Add new service `clean_spot` to vacuums
- Add as base component service, with associated support flag to make it optional
- Implement on Demo vacuum
- Implement on Xiaomi vacuum
- Update tests for platforms Demo and Xiaomi
- Change default icon for vacuums to `mdi:roomba`, but keep the one for the Xiaomi
- (In a polymer PR: add new service to command toolbar in the 'more-info' card)
* Add `clean_spot` service description
* fix default properties for vacuum component
* Do not use pychromecast.Chromecast for Cast Groups
pychromecast.Chromecast creates Chromecast instance with friendly_name and cast_type of the device and not of a group.
Which leads to collisions
* Update cast.py
* using hass.data
* Fixed and extended tests
* Line length in tests
* Lint in tests
* Added support for Egardia / Woonveilig alarm control panel
* Added support for Egardia / Woonveilig alarm control panel
* Added support for Egardia / Woonveilig alarms
* Updating egardia support with exception handling and other fixes
* Egardia platform, requirements file updated
* Fixing state checking
* Adding exception handling
* Removing unnecessary logging
* Removing unnecessary logging
* Updating to egardiadevice component 1.0.10
* Improving exception handling
* Adding implementation of egardiaserver for alarm triggered status
* Clean-up
* Fix my previous change
* Fix tests for Demo vacuum platform (and increase coverage)
* increase coverage of xiaomi vacuum tests and include in coverage
Also little fixes
* remove print statement
* Add DEBUG-level log for db row to native object conversion
This is now the bottleneck (by a large margin) for big history queries, so I'm leaving this log feature in to help diagnose users with a slow history page
* Rewrite of the "first synthetic datapoint" query for multiple entities
The old method was written in a manner that prevented an index from being used in the inner-most GROUP BY statement, causing massive performance issues especially when querying for a large time period.
The new query does have one material change that will cause it to return different results than before: instead of using max(state_id) to get the latest entry, we now get the max(last_updated). This is more appropriate (primary key should not be assumed to be in order of event firing) and allows an index to be used on the inner-most query. I added another JOIN layer to account for cases where there are two entries on the exact same `last_created` for a given entity. In this case we do use `state_id` as a tiebreaker.
For performance reasons the domain filters were also moved to the outermost query, as it's way more efficient to do it there than on the innermost query as before (due to indexing with GROUP BY problems)
The result is a query that only needs to do a filesort on the final result set, which will only be as many rows as there are entities.
* Remove the ORDER BY entity_id when fetching states, and add logging
Having this ORDER BY in the query prevents it from using an index due to the range filter, so it has been removed.
We already do a `groupby` in the `states_to_json` method which accomplishes exactly what the ORDER BY in the query was trying to do anyway, so this change causes no functional difference.
Also added DEBUG-level logging to allow diagnosing a user's slow history page.
* Add DEBUG-level logging for the synthetic-first-datapoint query
For diagnosing a user's slow history page
* Missed a couple instances of `created` that should be `last_updated`
* Remove `entity_id` sorting from state_changes; match significant_update
This is the same change as 09b3498f410106881fc5e095c49a8d527fa89644 , but applied to the `state_changes_during_period` method which I missed before. This should give the same performance boost to the history sensor component!
* Bugfix in History query used for History Sensor
The date filter was using a different column for the upper and lower bounds. It would work, but it would be slow!
* Update Recorder purge script to use more appropriate columns
Two reasons: 1. the `created` column's meaning is fairly arbitrary and does not represent when an event or state change actually ocurred. It seems more correct to purge based on the event date than the time the database row was written.
2. The new columns are indexed, which will speed up this purge script by orders of magnitude
* Updating db model to match new query optimizations
A few things here: 1. New schema version with a new index and several removed indexes
2. A new method in the migration script to drop old indexes
3. Added an INFO-level log message when a new index will be added, as this can take quite some time on a Raspberry Pi
* Xiaomi vacuum as component with switch, sensors and services
- Conversion from switch platform to async component.
- Add services proposed in #8416 to the new component, with shorter names.
- Add sensors for the vacuum robot as a selectable list from `battery`, `state`, `error`, `fanspeed`, `clean_time` and `clean_area` (the state attributes of the switch). The sensors don't poll, but listen to a signal to update the state, the switch fires this signal when updating.
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
* path change in requirements_all (from switch platform to component)
* copy pasting is a bad habit
* services to the components services.yaml, modify .coveragerc
* review: use with multiple hosts, fix calls to async_add_devices, fix ranges for services
* `icon_for_battery_level` util method
* Xiaomi vacuum as platform of new component vacuum
- Created new component `vacuum` from a ToggleEntity.
- Add services `turn_on`, `turn_off`, `cleaning_play_pause`, `stop`, `return_to_base`, `locate`, `set_fanspeed` and `send_command`.
- Remove the main switch for the xiaomi vacuum (the toggable main entity is the switch).
- Add `support flags` for the common services
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
- Move services descriptions to a yaml file for the new component.
- Update requirements_all.
- Update coveragerc.
* fix coveragerc
* fix battery icon helper to use more icons
* remove sensors, create properties and support flags for custom UI
* cleaning
* updated state_attrs for filtering in UI, renamed platform to simply `xiaomi`
* fix platform rename
* change fanspeed and expose `fanspeed_list` to use speed steps
* minor fixes
- Rename service `start_pause`
- Add 'Error' attribute only if `got_error`.
- Minor changes
* rename state attrs
* rename state attrs
* review changes: cut fan__speed, style changes, remove logging, and more
* add ATTR_COMMAND = 'command' to const
* pop entity_id from service data
* remove property accessor for vacuum object
* lint fix
* fix extra attrs names
* module level functions for calling the services
* params as optional keyword for `send_command`
* params as optional keyword for `send_command`, remove debug logs
* explicit parameters for `set_fan_speed` and `send_command`
* Demo platform for the vacuum component
* vacuum tests for the Demo platform
* some fixes
* don't omit vacuum
* vacuum tests for the Xiaomi platform
* fix test
* fix
* fix xiaomi test
* fix coveragerc
* test send command
* fix coveragerc
* fix string formatting
* The coverage is to low. It need 93% or more
* Allow reporting some state attributes as tags to InfluxDB
Some state attributes should really be tags in InfluxDB. E.g.
it is helpful to be able to group by friendly_name, or add a custom
attribute like "location" and group by that. Graphs in Grafana are much
easier to read when friendly names are used, and not node ids.
This commit adds an optional setting to InfluxDB config:
'tags_attributes'. Any attribute on this list will be reported as tag
and not as field to InfluxDB.
* Allow overriding InfluxDB measurement for each reported item separately
Bundling all items with the same "unit of measurement" together does not
always makes sense. For example, both "relatively humidity" and "battery
level" are reported as "%", but I'd rather see them as separate
measurements in InfluxDB. This commit allows for 'influxdb_measurement'
attribute. When set on node, it will take precedence over the global
'override_measurement' and component-specific 'unit_of_measurement'.
* Minor updates to InfluxDB component improvements, as suggested by
@MartinHjelmare.
* Moved per-component config from 'customize' into 'influxdb'
configuration section. The following three sub-sections were added:
'component_config', 'component_config_domain' and
'component_config_glob'. The sole supported per-component attribute
at this point is 'override_measurement'.
* Lint
* Fixed mocked entity_ids in InfluxDB tests to be in domain.entity_id
format, to satisfy EntityValues requirements.
* Added tests for new InfluxDB configuration parameters
* Fixes to some docstrings
* Add mochad light component
This commit adds a new component to control x10 dimmers/lights with
mochad.
* Create comm_type and address constants
The comm_type and address conf constants are shared between all mochad
devices because they are required information used for configuring a
device. This commit moves the definition into const.py so they're
consistent between all component types.
* Add support for LaunchRequest alexa intent
* Support LaunchRequest for multiple skills
* formatting
* adding tests to cover launch request
* formatting
* flux_led: support for property "available"
* Implemented changes from code review
* Implemented changes from code review
* Implemented changes from code review
* Honeywell fixes and improvements
Give the Honeywell device a state ('On', 'Off', etc) that
can be displayed to user and understood by other components.
Previously this was always 'Unknown'. Update also raises a
state_changed event when a new temperature is polled.
These two together fix an issue (#8688) where Honeywell
climate data couldn't be logged in InfluxDB.
* Roll back some changes
These were not necessary to achieve the result I wanted.
* Renamed RoundThermostat's 'device' member for greater clarity
Now called 'client'
* Improve and simplify discovering thermostat mode
Per code review, this is a rather neater way to discover the thermostat mode
* Update tests for compatibility with new component
The tests previously relied upon the update() method being
called in the constructor. This is no longer the case.
* Address formatting review comment
Parens not necessary
* This system mode is not certain to apply to domestic hot water
Moved the mode lookup to only happen on update of radiator devices,
since hot water devices seem to be treated differently and I can't test.
* Allow sonos to select playlists as a source
Most of this was taken from
https://github.com/home-assistant/home-assistant/issues/5598#issuecomment-278229895
however I made a few small improvements so that it works for other
services than Spotify and it should properly switch to playing the queue
if you had another song playing previously.
/cc @PatBoud
* Attempt to fix style issues
* More indent changes
* Fix misplaced period
* Move playlist replacement to function
* Privatize replace_queue_with_playlist and explain
* Remove unneeded decorator
* Fix doc formatting
* Added support to enable/disable motion detection for foscam cameras. This support was added in 0.48.1 as a generic service for cameras. Motion detection can be enabled/disabled for foscam cameras with this code-set.
* Fixed the violation identified by hound-bot
* Fixed the comment posted by HoundCI-Bot regarding using imperative mood statement for pydocstyle
* Fixed the error that travis-ci bot found.
* As per comment from @balloob, Instead of directly using the URL to talk to foscam, used a 3rd party foscam library to communicate with it. This library already has support to enable/disable motion detection and also APIs to change the motion detection schedule etc. Need to add more support in the pyfoscam 3rd party library for checking if motion was detected or even if sound was detected. Once that is done, we can add that into HASS as well.
* Lint
* Removed the requests library import which is not used anymore
* Updating requirements_all.txt based on the code-base of home assistant that i have. Generated using the gen_requirements_all.py script
* Updating requirements_all.txt and requirements_test_all.txt generated by gen_requirements_all.py after latest pull from origin/dev
* Updated requirements_all.txt with script
* Updated the foscam camera code to fix lint errors
* Fixed houndci violation
* Clean up remote component
* Don't have device be required in send_command service and method.
* Don't have entity_id be required in the base service schema.
* Don't always add activity in the data dict for a service call.
* Update harmony remote platform according to new service schema.
* Remove not needed properties and attributes from the Kira remote
platform.
* Add send_command method to demo platform.
* Add tests and remove duplicate tests.
* Break out required argument as positional argument
* added invert_state optional parameter
* removed superfluous parens
* moved state inversion to the is_closed method
* added relay_invert feature
* fixed syntax to comply with houndci-bot rules
* changed state_invert to invert_state and relay_invert to invert_relay
* Add new component for TPLink light bulbs.
* Update with result of gen_requirements_all.
* Add new component light.tplink.
* Move I/O outside of properties as per https://goo.gl/Nvioub.
* Fixed issue with routers in bridge mode
- Router in brdige mode apparently don't report all of the stats
- Re-wrote the data_format function so it's a bit easier to follow and able to log keys that aren't supported by a router in a given mode
- Changed config so that it properly ignores conditions when not explicitly listed
- Added tests to check for the above and also to verify we log that a key doesn't exist rather than throwing an exception
* Mistakenly was calling MONITORED_CONDITIONS in data_format
- Changed to be the actual config values to prevent log error
* New media_player platform for Russound devices using the RIO protocol
Auto discovers zones and sources
Handles media metadata from sources that support it
asyncio implementation
Push updates for any zone or source changes so no polling required.
* Fixed up linting issues
* Addressing PR feedback
Updated russound_rio dependency to 0.1.3
Use enumerate_zones and enumerate_sources methods instead of doing it in
the platform.
Register callbacks in async_added_to_hass coroutine
Corrected behavior of async methods
DirectPy, the third party library used for controlling directv boxes,
has the ability to accept an ID in order to act as a remote for Genie
slaves instead of just the master directv box. This commit adds glue
such that one can configure home assistant to interface with these slave
genie boxes.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
* Add new component for TPLink light bulbs.
* Update with result of gen_requirements_all.
* Add new component light.tplink.
* Move I/O outside of properties as per https://goo.gl/Nvioub.
* Fixed issue with routers in bridge mode
- Router in brdige mode apparently don't report all of the stats
- Re-wrote the data_format function so it's a bit easier to follow and able to log keys that aren't supported by a router in a given mode
- Changed config so that it properly ignores conditions when not explicitly listed
- Added tests to check for the above and also to verify we log that a key doesn't exist rather than throwing an exception
* Mistakenly was calling MONITORED_CONDITIONS in data_format
- Changed to be the actual config values to prevent log error
* Update zwave.py to work with updated OpenZwave library
Update zwave.py to work with updated OpenZwave library
* Update zwave.py
* Update zwave.py
* Update to fix garage door openers
Update to fix garage door support for latest version of openzwavelib
* Update to cover.zwave list of states
Update to cover.zwave to provide list of states based on dev version of
openzwave lib
* Some values not saved
* Formatting fix
* Formatting fix
* Variable typo
* Formatting fix
* Formatting
* Variable Update
Variable Update and properties added
* Formatting fixes
* Formatting Fix
* Update test case for door states
* Formatting / Testing process fix
* Formatting
* Formatting / Test Fixes
* Variable rename
* Added members to CoverDevice
* Removed un-needed else
* Formatting
* Formatting
* Variable name changes and const updates
* Changed variable names to cover_state
* Added constains into const.py
* Updated to change the main state on the cover device
* Fixes
* Formatting fixes
* Formatting/Variables
* Formatting
* Variable fixes
* Import update
* Formatting / Variables
* Update test for new states
* Revert state changes
* Test fix
* Variable Fix
* Formatting
* Variable typo
* Missing constant
* Variable fix
* Requested changes
* Added is_opening
* Added is_closing
* Updated test based on changes
* Formatting
* Changed cover_state back to _state
* Formatting and variable fixes
* Test fixes
* Formatting and variable touchup
* Formatting
* Optimizations
* Add new cover features to demo
* Add tests for demo cover closing/opening
* Remove unused STATE_STOPPED
* Add tests for new zwave cover values
* Bugfix: remove superfluous domain filter
This filter is already applied later in the function by the `filters` object, where it is conditionally applied when appropriate. This fixes the problem where we get a domain filter even when searching for a single entity_id, which needlessly harms the query's performance.
* Performance: build different query when only getting single entity
When querying the history of a single entity, we can use an entirely different method for the "synthetic zero data point" by simply sorting by date and doing a LIMIT 1. This performs thousands of times better than the multi-entity query when the current recorder_run has been going for a while.
* Add entity_id filter to single-entity request
The entity_id filter was handled inside the `filters.apply` logic which is used in most cases, BUT didn't work when no `filters` was passed in to the method. Now it'll work even if no `filters` object is passed in.
* Fix linting errors in history.py
* Undo removal of domain filter
Putting back the domain filter that was removed in 76a6371705dcd57483e55dcc03435ae867c184d2 - there are use-cases where get_states is called without a filter object, so we need the domain filter to work in those cases as well.
* Fix truncated comment
* work on weather panel
* update yahooweather with more forecast details
* Update yweather to allow user input forecast date
* fix for houndci
* fix long line
* fix1
* Revert "work on weather panel"
This reverts commit 28b4972233de42617fb05df574de22743604edfd.
revert unintentional submodule change
* fix2
fix typo, add try catch to another int()
* fix pylint
* fix3
* fix4
* Update yweather.py
* Update yweather.py
* Remove global data construct
* Yahoo API support only 5 days forecast
* remove forecast
* fix lint
* fix lint p2
* Update yweather.py
* Manual alarm with MQTT control
* Duplicate manual control panel code instead of extending it
* Duplicate manual alarm test as well; modify for manual_mqtt
* Add MQTT-specific tests for manual_mqtt alarm
Back in "ubus: Refresh session on Access denied (#8111)" I added the
decorator _refresh_on_acccess_denied. Somehow that stopped multiple ubus
trackers from working in parallel, and only the one first init'ed
worked.
Changing the order of the decorators fixes the issue but, I'm sorry to
say I can't figure out why. There's some magic somewhere which I'm
missing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Back in "ubus: Refresh session on Access denied (#8111)" I added the
decorator _refresh_on_acccess_denied. Somehow that stopped multiple ubus
trackers from working in parallel, and only the one first init'ed
worked.
Changing the order of the decorators fixes the issue but, I'm sorry to
say I can't figure out why. There's some magic somewhere which I'm
missing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Fix TP-Link device tracker regression since 0.49
This regression was introduced by #8322.
Fix is to utf encode the password like the other TP-Link backends do.
* Fix linting issue introduced in previous commit
Commit in question: 677f3fbb7f821ee925364c8260d235dce4f0ddbe
According to the documentation, the `value_template` for the REST
binary_sensor is not required. However, if you don't provide this when
setting up a binary sensor, the component fails. Looks like a variable
was not being set, which I've now included.
This should make the REST binary sensor act the same way as the REST
sensor now.
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* Use new python formating syntax and attribute constant
* Shorten too long line
* Fix indent
* Add support for multiple ping utilities.
* Added support for differing flavours of ping included with
different distributions (specifically alpine linux for hassio's
homeassistant).
* Updated as per comments in PR
* Add intent component
* Add intent script component
* Add shopping list component
* Convert Snips to use intent component
* Convert Alexa to use intent component
* Lint
* Fix Alexa tests
* Update snips test
* Add intent support to conversation
* Add API to view shopping list contents
* Lint
* Fix demo test
* Lint
* lint
* Remove type from slot schema
* Add dependency to conversation
* Move intent to be a helper
* Fix conversation
* Clean up intent helper
* Fix Alexa
* Snips to use new hass.components
* Allow registering intents with conversation at any point in time
* Shopping list to register sentences
* Add HTTP endpoint to Conversation
* Add async action option to intent_script
* Update API.ai to use intents
* Cleanup Alexa
* Shopping list component to register built-in panel
* Rename shopping list intent to inlude Hass name
* The gateway configuration accepts a MAC address or a SID value in uppercase already.
The ringtone services accepts the same values now. I hope it will avoid confusion.
* Device support for the new wall switches with neutral lead (ctrl_ln1, ctrl_ln2) added.
* Measurement unit from pressure of weather.v1 fixed.
* Device support for sensor_magnet.aq2 added.
* Device support for sensor_motion.aq2 (motion and lux) added.
* Code reformatted.
* The ringtone service (start/stop) uses the parameter gw_mac instead of gw_sid now.
* Version of the required library updated.
* Enhance python_script to support "_getitem_"
In order to use dict / list structures in python scripts we need
_getitem_ allowed in the RestrictedPython environment. There is a
default_guarded_getitem included with RestrictedPython, which is a
pass through used in the Eval code paths.
* Add tests for dict/list support in python_scripts
* Lint
* Added a service to write to KNX group addressed including documentation
* Define parameters as required
* Reformating
* Moved service documentation to service.yaml
* Moved service documentation to services.yaml
* Update knx.py
* Upgrade the alarmdecoder dependency library from 0.12.1 to 0.12.3. Nutech software who owns this library have upgraded this library with some fixes regarding arming it to home/away and then disarming the alarm. Without this upgraded library, HASS is having a problem when we try to disarm an armed alarm after around 8 hours or so.
* Updated the requirements_all.txt by running the script gen_requirements_all.py
* Add support for different stream formats
* Encapsulate logic inside MediaExtractor class
* Add CONFIG_SCHEMA
* Fix for cases when youtube-dl returns content of playlist as list
* Some images are not supported by face_recognition, so this patch treats the error
messages instead throwing a traceback. Fixes#7867
* Makes lint happy
* Initial support for Google Wifi/OnHub
* Moved state logic to update function of API class
- Throttle added to update
- State logic implementation is cleaner
- Modified tests to work with the new throttle on update
* Return a 0 temperature value when none is found
It's well documented that these TRVs will only return the current temperature
for a short time after the actuator has moved. This means that, usually, they will
not return the current temperature. Setting a non-value here causes errors in the logs
and for the TRV to not show on the dashboard at all
* Fix lint issue
The citibykes API returns "null" as value for empty_slots on some
stations (see #8527). This causes the component to not process the data.
This is fixed by accepting None as valid data. The row in the frontend
is left empty if "null" was returned by the service.
fixes#8527
data may be None if twitter data property unconfigured:
File "/opt/homeassistant/homeassistant_venv/lib/python3.4/site-packages/homeassistant/components/notify/twitter.py", line 63, in send_message
media = data.get(ATTR_MEDIA)
* Fix TP-Link device tracker regression since 0.49
This regression was introduced by #8322.
Fix is to utf encode the password like the other TP-Link backends do.
* Fix linting issue introduced in previous commit
Commit in question: 677f3fbb7f821ee925364c8260d235dce4f0ddbe
* Make it available during state paused.
* Don't adjust for media_position_updated_at. I.e. do as vlc, sonos etc
so that returned position is the position at the time of
media_position_updated_at, not now.
* Make aiolifx modules easily available
* Use aiolifx features_map for deciding bulb features
Also move the feature detection out of Light so it is available even
during the initial detection.
* Move each LIFX light type to a separate class
* Simplify AwaitAioLIFX
This has become possible with recent aiolifx that calls the callback even
when a message is lost.
Now the wrapper can be used also before a Light is added though the register
callback then has to become a coroutine.
* Refactor send_color
* Add support for multizone
This lets lifx_set_state work on individual zones.
Also update to aiolifx_effects 0.1.1 that restores the state for individual
zones.
* Make it available during state paused.
* Don't adjust for media_position_updated_at. I.e. do as vlc, sonos etc
so that returned position is the position at the time of
media_position_updated_at, not now.
* Make aiolifx modules easily available
* Use aiolifx features_map for deciding bulb features
Also move the feature detection out of Light so it is available even
during the initial detection.
* Move each LIFX light type to a separate class
* Simplify AwaitAioLIFX
This has become possible with recent aiolifx that calls the callback even
when a message is lost.
Now the wrapper can be used also before a Light is added though the register
callback then has to become a coroutine.
* Refactor send_color
* Add support for multizone
This lets lifx_set_state work on individual zones.
Also update to aiolifx_effects 0.1.1 that restores the state for individual
zones.
* Use pip install --user if venv not active
* Set PYTHONUSERBASE to deps directory, when installing with --user
option.
* Reset --prefix option to workaround incompatability when installing
with --user option. This requires pip version 8.0.0 or greater.
* Require pip version 8.0.3.
* Do not delete deps directory on home assistant upgrade.
* Fix local lib mount and check package exist.
* Update and add tests
* Fix upgrade from before version 0.46
* Extract function to get user site
* Add function(s) to package util to get user site.
* Use async subprocess for one of the functions to get user site.
* Add function to package util to check if virtual environment is
active.
* Add and update tests.
* Update version for last removal of deps dir
* Address comments
* Rewrite package util tests with pytest
* Rewrite all existing unittest class based tests for package util as
test functions, and capitalize pytest fixtures.
* Add test for installing with target inside venv.
The default aiolifx timers are tuned for a network with few lost packets.
This means that lights can become "unavailable" from just a two second
dropout. An unavailable light is completely useless for HA until it is
rediscovered so this is an undesirable state to be in.
These tweaks make aiolifx try harder to get its messages through to the
bulbs, at the cost of some latency in detecting lights that actually are
unavailable.
* This change will enable the functionality for Arlo Q cameras. When we added the code to enable/disable motion detection, we assumed that base station will be present for all arlo type of cameras. But found recently that Arlo Q cameras does not have base station. So, removed the base_station dependency in the init code. Also added code in enable/disable motion detection code to first check if base station is detected by library. If base station is detected then it will use it to enable the motion detection. If not detected, even if service was called, it will not do anything. Enabling/disabling the motion detection for Arlo Q cameras have to added by someone who has that camera. I don't have the Arlo Q cameras.
* Fixed a typo in the code.
* Added support for temperature_offset and humidity_offset
Some DHT sensors require some offsets to work.
* Support for temperature and humidity offset
* Changed lines with 79 characters
* Moved const to dht.py from const.py
* Changed temperature_offset range
* Removed the const
const.py is at original state.
* Fixed continuation line under-indented
* Removed first round and added debug info
* Fix -1 value issue
Fixed issue where thermostat will sometimes return a current temperature or set temperature value of -1
* Update radiotherm.py
* Update radiotherm.py
* Update radiotherm.py
Added retry limit
* Update radiotherm.py
* Update radiotherm.py
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
bellows 0.3.0 changes the API to have both, renaming the attribute which used
to be for input clusters in the process.
This is in preparation for remotes.
* Allow notifications to include media, with Twitter as the first implementation. The Twitter notifier uses the Twitter-recommended async chunked media/upload approach and tries to convey the correct mime type of the media. Twitter implementation based on https://github.com/geduldig/TwitterAPI/blob/master/examples/upload_video.py.
* Changes based on balloob's review:
balloob: "Please remove this file. We fixed the issue in our tests that left this artifact."
balloob: "…prefer a guard clause"
balloob: "This is very inefficient. You are now generating up to 99 values."
balloob: "Since media_id is going to be None, why not just return None and you can remove the else."
* balloob: "Other notify platforms are using ATTR_DATA for it. That way if a platform requires extra metadata, we don't need to add extra fields. So please add it to Twitter via ATTR_DATA."
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* New component to connect to VELUX KLF 200 Interface
* Issue #8203: modifications as suggested by hound
* Issue #8203: added entries to .coveragerc
* moving velux/__init__p.y to velux.py
* Issue #8203: Using hass.data for storing global object, updated docstrings
* Issue #8203: validation of config, using standard approach for getting config values
* Issue #8203: Exception handling if connection to velux component fails
* Issue #8203: removed unused import
* Issue #8203: Some minor changes within docstrings
* Issue #8203: Some minor changes within docstrings
* Issue #8203: added dependency for pyvlx to requirements_all.txt
* Issue #8203: less broad exception
* Issue #8203: increased version
* Issue #8203: changed position of pyvlx within requirements_all.txt
* Issue #8203: bumped version of pyvlx to 0.1.3 (better handling of retries when token expires)
* reset pointer to home-assistant-polymer
* Issue #8203: modifications as suggested by fabaff
* hound *sigh*
* use upstream RachioPy, fix manual run switches
* Update requirements for PyPi version of rachiopy
* Use upstream RachioPy 0.1.2 (partial revert of 39c6484d89)
* Revert rachiopy downgrade
* First version of a LaMetrci platform with a Notify module
* Cleanup, fix formatting bugs
* More formatting
* Formatting
* Updated requirements
* formatting
* Formatting
* More formatting
* Dummy commit for new Travis CI run
* Refactoring class methods to instance methods
* Cleanup unused classed
* Removed Eddystone_weatherurl that had nothing to do with this component
* Cleanup class methods
* Cleanup requirements
* Removed broad excepts
Removed storage of LaMetric devices
* Removed unused import
* Use user-set device names for Linksys Smart Wi-Fi routers (3)
* Newline at end of linksys_smart.py
* Remove spaces in last line of linksys_smart.py
* Update linksys_smart.py
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* UPnP mapping overlap
Addressing: https://community.home-assistant.io/t/upnp-new-module/20839
* removed whitespaces
Some devices don't seem to return the information properly when asked for
multiple attributes in one read. This separates out the reads if it didn't
work as expected the first time.
Because this data is cached in bellows, I don't expect any extra reads in
the "happy" case.
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Fix pylint issue (#8325)
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* Update snips.py
* Get the list of wireless interfaces from nvram so tri-band routers
work
* ARP checks don't work reliably for ap mode so remove it, associated
list seems pretty solid
* Match on 'mac' instead of 'ip' since we can't use it for ap mode
* The `client_info_tmp` nvram reference, Asus removed it some time ago
* Update AsusWrtResult
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Fix checking result from a modbus transaction
* Add missing decorator
* Added modbus write coil service and added descriptions
* Removed a hiding debug print
* Add address-specific KNX listeners that fire events on the HASS bus
* Added docstring
1-byte messages will be converted from a list to the value
* Formating
* Try catch around database updates in recorder. Resolves 6919
* Fixing failed test for line length
* Catch only OperationalError and retry connections before giving up
* Including alchemy exceptions in single function
This applies what was the intended fix in #8336.
moves the fallback for setting client_id to the case when no mqtt config was provided at all. This should reflect the most common use case that fails.
This commit is a workaround and should be reverted when hbmqtt is fixed to allow empty client_id again.
* Initial commit - new CityBikes platform
* Several syntax fixes.
* Added imperial unit support.
* Added station list lenght validation.
* Style fixes.
* Updated requirements.
* Updated .coveragerc.
* Fixed style problems according to pylint output.
* Updated SCAN_INTERVAL value.
* Fixed station names.
Removed unnecessary calls to `slugify`.
Changed the base name to reflect the name of the bike sharing
network, instead of the more generic `citybikes`.
* Small style fix.
* Use async version of python-citybikes
* Made platform setup async.
* Made some more things async.
* Switched to constants.
* WIP: different approach to async.
* Removed python-citybikes depnedency to fix async issues.
* Removed unnecessary hidden property.
* Style fixes.
* Retry network detection.
* Style fixes, and base name usage.
* Fixes according to comments.
* Use cv.latitude instead of coercing to float.
* Updated requirements.
* Several fixes and improvements.
* Started using PlatformNotReady exception.
* Cached the networks list result to avoid unnecessary API requests.
* Switched the asyncio.timeout to use a constant.
* Refactored CityBikes API requests into a separate function
* Fixed linting errors.
* Removed unnecessary requirement.
* Lift Apple TV to pyatv 0.3.2
Update code to use basic new features.
* Support button presses in Apple TV
* Support device authentication
* Convert Apple TV to a component
A media_player platform and a remote platform will be loaded for each
manually configured or discovered device.
* Move device auth to apple_tv component
* Update requirements and coverage config
* Add scan support to apple_tv
* Remove the need to login on the UPC Connect component
* Remove unnecessary imports
* Update the unit tests for the UPC Connect component
* Fix the "302" error with the UPC Connect component
* Fix a flake8 error
* Update the unit tests for the UPC Connect component
The upstream Avion and Decora code has changed to punt retry logic out to
consumers, so update to match. As a bonus, Avion also gains support for
pulling switch configuration off the web rather than requiring manual
configuration.
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Add tube_state
Add tube_state sensor
* Final cleanup
* Make corrections
Correct PLATFORM_SCHEMA
* Fix space
* Make test pass
* Correct format of test
Test still failing, don’t understand why
* correct description
* Make test pass
Preferred method below returns None
state = self.hass.states.get('sensor.london_overground')
* Format for hound
* indent
* Make requested changes to test, not working
Test fails with:
AssertionError: assert 0 > 0
where 0 = len([])
Surely I need tube_state.setup_platform ?
* Fixed test
Config was wrong
* Change component name to london_tube
* Update name to london_underground
Make consistent
* cleanup
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Implement templates for covers
* Fix a few remaining pylint warnings
* Fix hound line-length warnings
* Fix one more hound line-length warning
* Fix quadruple-quotes an line length code-quality issues
* Irrelevant change to retrigger travis due to timeout
* Use volutuous Exclusive to check for mutex condition
* Fix incorrect state check
* Comfoconnect fan component.
* Fix linter. Don't store hass object when not needed.
* More code style.
* Rebase to dev and add to coverage ignore list.
* Use published package from pypi.
* Added invert flag for position for actuators that uses 100% for fully closed position
* Implementation of tilt functionality
* Bugfix check tilt
* Formatting
* Formatting fixes
* Formatting
* Bugfix set_tilt
* Minor modifications in configuration section
* Formatting
* Update knx.py
* add percentage (DPT_Scaling) KNX sensors
1. moved basic functionality to KNXSensorBaseClass instead of
KNXSensorFloatClass
2. added "if" clause in setup for a "percentage" sensor type and added KNXSensorDPTScalingClass
* support-knx-percentage-sensor: lint correction
Updated convert method base sensor class to avoid lint warning
(R201 - Method could be a function)
* added PLATFORM_SCHEMA for configuration
1. added SCHEMA extension for defined keywords
2. moved fixed data for internal settings out of sensor logic
3. moved everything into standard KNXSensor object
4. added parsing of extra config parameters in __init__
* correct lint errors on support-knx-percentage-sensor
* Fixed mqtt subscription filter on sys $ topics
* fixed linting issue
* added unit tests for $ topics and changed fix to use re.escape
* merge upstream/dev mqtt unit tests
* Update test_init.py
* LIFX: Move light effects to external library
This moves the LIFX light effects to the external library aiolifx_effects.
To get the light state synchronized between that library and HA, the LIFX
platform no longer maintains the light state itself. Instead, it uses the
cached state that aiolifx maintains.
The reorganization also includes the addition of a cleanup handler.
* Fix style
* Fix Plex component to use port number in discovery.
* Break line
* Correctly save port to config
* Handle port with fewer code changes
* This is stuck configuring and I'm not sure why
* Changes suggested by @dale3h
* Open Hardware Monitor sensor
Platform which is able to connect to the JSON API of Open Hardware Monitor and adds sensors for the devices.
* Remove copyright in header, not needed.
* - Removed old code
- Fixed typo’s in comments
- Removed log spamming
- Removed code that was unnecessary
- Use requests instead of urllib
- Moved sensor update functionality to data handler, to remove unwanted constructor parameters
* Fixed typo in comment
Added tests
* Added default fixture, to stabilize tests
* - Fix for values deeper than 4 levels, no longer relies on fixed level
- Fixed tests
* Removed timer in preference of helper methods
* Moved update functionality back to Entity….
Updated SCAN INTERVAL
* Added timeout to request
Removed retry when Open Hardware Monitor API is not reachable
Fixed naming of sensors
Flow optimalisations
Fixed tests to use states
* Remove unused import
* Initial commit for an Axis service to do Vapix calls to device
* Added check to see if metadatastream initiated properly
* Make sure to configure the correct IP address when setting up registered devices on system start
* Manage reconnection when device is discovered with a different IP
* Cleaned up setting new IP
* Better naming of event for new IP
* New version of dependency axis
* Fix flake8 failing
* Break out service default strings to constants
* Use the dispatcher and not the core event bus for internal communication
In trying to come up for some reason behind issue #6365 (which only
happens on some platforms) the best guess is that some components are
managing to get a string value all the way up to the Polymer UI for
temperature, which then an increment of +0.5 is treating as a string
concat operation instead of addition. So 20 + 0.5 becomes 200.5 hits
the max thermostat value.
This will throw an exception if the climate temp value isn't a
number. That's going to turn a soft fail into a hard fail on
potentially a number of platforms. Mysensors is one of the platforms
that was reported as having the issue. So put some explicit float
casts where that might be coming from as well.
Model CT50 has an "Auto" mode. When mode is set to auto we need to ask
what the current state is: cool or heat. Then we can query the
appropriate target temperature.
Without this fix, the target temperature shows up blank in the UI and
setting the mode fails.
* Uninstall enum34 in python3.6 docker image
This is a short term fix for #7733
What's happening is the following dependencies are pulling enum34:
- pygatt
- libsoundtouch
- yeelight
However, enum34 is not meant to be installed in Python versions 3.4+
and causing the `AttributeError: module 'enum' has no attribute 'IntFlag'``
I've submitted patches to these projects so we don't have to do this
manual uninstall in the future.
* Update Dockerfile
* Add ClickSend notify service.
* PR #8135 changes.
- Some code spacing fixes.
- Add timeout to requests.
- Change doc url.
- Use const.py as much as possible.
- Check credentials to determine if setup fails or not.
- Add docstrings.
- Use string formatting.
* PR #8135 changes.
- Remove unused variables.
- Continuation line under-indented for visual indent.
* PR #8135 changes.
- Format code based on PEP8.
* PR #8135 changes.
- Remove unused base64 dependency.
* PR #8135 changes.
- Fix: D205: 1 blank line required between summary line and description (found 0)
- Fix: standard import "import json" comes before "import requests"
* PR #8135 changes.
- Add files to .coveragerc
* Remove obvious comments and set constant
* added default parameter
* zone overlay can be set with or without a temperature and with or without a duration. Duration is not supported by hass
* Fixes issue #7059 with missing sensorDataPoints
* Fixes issue #6943 added ac_mode
* ac_mode cases
* added fan modes
* changed handling of device state OFF
* fixed an error initializing a dictionary (#6943)
* changed pytado version
* activated pytado debugging
* Changed pyTado version
* mytado.com changed authentication challenge
* Fixed linelength and whitespace issues
* requirements to pytado changed
When a openwrt router reboots, all the session ids gets invalidated.
In that case we need to log in again and get a new session id.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Added rfxtrx binary sensors to a new branch
* binary_sensor/rfxtrx: added support for automatic_add
* Fixed pylint warnings
* off_delay is set wit clearer time specifiers (cv.time_period)
* fire_event config attribute is now supported by rfxtrx binary sensors.
* Cosmetic ordering
* Fix lint errors for PR requirements.
* Fixed indents, line length and comment problems.
* Yet another line too long fix...
* Using existing attributes and config constants.
* Cosmetic fix (ATTR_DATABITS -> ATTR_DATA_BITS)
* Removed unused attribute
* FIX masked device id logging message
* FIX line too long
* FIX trailing white space
* FIX: rfxtrx binary_sensor manages its own devices only.
* Added a basic config helper for pt2262 devices
* Make pylint happy
* Fixed most houndci-bot-detected issues
* Fix TOX complaint about blank line after function docstring
* Fix data bit value calculation
* Fixed line too long
* Removed unnecessary code.
* remove trailing whitespace
* Added hass property to device object.
* Use netdisco to automatically discover harmony hubs.
* Allow some settings in configuration.yml to override even on discovered hubs.
* Global is not required as no assignment on variable
* Use `set` instead of list for perf
* Store cache of discovered devices against `hass.data` rather than in global
* Handle case if the device cache is empty
* Fix indentation issue
* Configurable fade-out behavior
Adds a per-group "fade" option with values of "out" (default) or "none".
By default, the lights are faded out when turned off, but this can cause usability issues when manually switching wall switches, since the bulbs turn back on at minimum brightness.
* Changed fade value from enum to boolean
* No need to fall back to default since voluptuous takes care of that.
* Update InfluxDB to handle datetime objects
Updates the InfluxDB regex to ignore datetime objects being coverted
into float values.
Adds tests to the component to ensure datetime objects are corectly
handled.
* Fix Hound errors
Fixes errors from Hound bot
* Update InfluxDB to handle multiple decimal points
Changes the way InfluxDB handles values such as 1.2.3.4 to be 1.234 so
it stores in InfluxDB as a valid float value
* Fix lint issues
Reduce the size of a line for the linter
* Update InfluxDB to pass on unknown variable
If we get an error trying to convert a variable to a float, let's ignore
it completely
* Make InfluxDB Regex constants
Makes the Regex's used by InfluxDB constants so they don't need to be
compiled each time
* cleanup
* fix lint
* Update regex
* fix tests
* Fix JSON body missing new line character
* fix exceptions
* Fix lights issue #8098
* Don't check self._color to decide whether to calll get_color()
self._color is None on init, so get_color() will never be called.
We only want to know which of the DHCP clients are indeed active.
For example: I've a table of static DHCP leases with most of the IPs of my network, so this module is always detecting them as present. With my patch only the active ones will be detected as present.
I already mentioned here: https://github.com/home-assistant/home-assistant/pull/7366#issuecomment-302950139
* Update InfluxDB to handle datetime objects
Updates the InfluxDB regex to ignore datetime objects being coverted
into float values.
Adds tests to the component to ensure datetime objects are corectly
handled.
* Fix Hound errors
Fixes errors from Hound bot
* Update InfluxDB to handle multiple decimal points
Changes the way InfluxDB handles values such as 1.2.3.4 to be 1.234 so
it stores in InfluxDB as a valid float value
* Fix lint issues
Reduce the size of a line for the linter
* Update InfluxDB to pass on unknown variable
If we get an error trying to convert a variable to a float, let's ignore
it completely
* Make InfluxDB Regex constants
Makes the Regex's used by InfluxDB constants so they don't need to be
compiled each time
* cleanup
* fix lint
* Update regex
* fix tests
* Fix JSON body missing new line character
* fix exceptions
* Fix lights issue #8098
* Don't check self._color to decide whether to calll get_color()
self._color is None on init, so get_color() will never be called.
* add knx cover
also corrected bugs in device config
1. overwriting of addresses in KNXMultiAddressDevice
2. setting and getting int values
3. added percentage scaling
* Update __init__.py
* Add support for Insteon FanLinc fan
* Upgrade insteonlocal dependency to 0.49
* Lint/flake fixes
* Remove configurator
* Make Hound fixes
* Revert "Make Hound fixes" and "Remove configurator"
This reverts commit 04d1f7fdb162f59f8e740fd1fc17e87d0ca81fd3.
This reverts commit 7b8278d7cf8cb6b1e3606ee17bd4a9ebb6ca1e06.
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* handle TransportError exceptions when calling JSONRPC API
* use double quotes for log messages; show TransportErrors as in async_ws_connect
* fix spaces around keyword / parameter
* fix logging message
* review changes
This will allow for dynamically updating weather states, for instance if
you wanted to use the latitude and longitude of a phone or other device
to get the weather for your current location.
Vera devices are reporting battery levels as a sting by appending a
percentage sign (%) on the end.
To make the Vera component act like other Home Assistant components,
let's remove the percentage sign from the battery report levels so that
we only display the battery level.
This may be a "breaking change" if people are relying on the Vera
battery levels to be a string instead of an int. However, this will make
the battery level reports compatible with everything else.
* Use standard entity_ids for zwave entities
* Include temporary opt-in for new entity ids
* Update link to blog post
* Update tests
* Add old entity_id as state attribute
* Expose ZWave value details
* Update tests
* Also show new_entity_id
* Just can't win with this one
* Use standard entity_ids for zwave entities
* Include temporary opt-in for new entity ids
* Update link to blog post
* Update tests
* Add old entity_id as state attribute
* Expose ZWave value details
* Update tests
* Also show new_entity_id
* Just can't win with this one
* Setup to send component data is option is enabled
* testcases, as well as moved to a single boolean, passed to the function
* fixed pep8 failures
* Clarify config option.
* Adding support for https.
This change allows to access a firetv-server instance that runs over https (via a reverse proxy for exemple).
Default stays http, but if `ssl: true` is set in the configuration the connection goes over https.
Successfully tested.
* respecting the 79 characters line limit
* Fixed the Wind sensor following new release of netatmo-api-python
The NetAtmo PR was at:
https://github.com/jabesq/netatmo-api-python/pull/5
Essentially, this commit adds a protection when adding an incorrect
monitored conditions to avoid to fail the entire NetAtmo component,
plus for consistency reasons all conditions are now in lower case.
* Fixes following the CI tests
* blink: the existing 50/50 flashing between base color and effect color
* breathe: a lifx_effect_breathe replacement
* ping: mostly base color with a short flash at the end of the cycle
* strobe: dark base color and short cycles by default
* solid: temporary color change, base color never visible
Adding a service call for each mode is a bit extravagant so instead
lifx_effect_breathe has been folded in as an option and that service
call is deprecated.
* Allow device tracker platforms to specify picture
* Allow device tracker to specify icon during discovery
* Clean up and add tests
* Fix lint
* Fix test
* Make percentage string values as floats in InfluxDB
Currently Z-wave and other compontents report an attributes battery
level as an integer, for example
```yaml
{
"is_awake": false,
"battery_level": 61,
}
```
However, some other components like Vera add the battery level as a
string
```yaml
{
"Vera Device Id": 25,
"device_armed": "False",
"battery_level": "63%",
"device_tripped": "False",
}
```
By removing any % signs in the field, this will send the value to
InfluxDB as an int, which can then be used to plot the data in graphs
correctly, like other percentage fields.
* Add tests and remove all trailing non digits
Adds tests and now removes all trailing non-numeric characters for
better use
* Update variable name for InfluxDB digit checks
Updates the variable used for the regex to remove trailing non digits
* Fix linting errors for InfluxDB component
Fixes a small linting error on the InfluxDB component
* dismiss service for persistent notifications
Unnecessary notifications can now be removed automatically. Added a
dismiss service to remove persistent notifications via script and/or
automation.
* removed unnecessary loop
loop removed
* Add color_util.color_hsv_to_RGB
* Use helper functions for LIFX conversions
The LIFX API uses 16 bits for saturation/brightness while HA uses 8 bits.
Using helper functions makes the conversion a bit nicer and less prone
to off-by-one issues.
The colorsys library uses 0.0-1.0 but we can avoid that by using the HA
color_util converters instead.
* initial commit
* class name and requirements_all.txt
* removed mentions of D7050
* changed default name
* catch oserror in update, travis errors.
* use nad_receiver pip version
* update coveragerc
* Add initial version
* Fix requirements
* Prefer logging over printing
* Set executor thread name on >Py36 only
* Add tests
* Lint
* Add restrictedpython to test dependencies
* Create python_script.py
From doc:
```
However, an empty dict ({}) is treated as is. If you want to specify a list that can contain anything, specify it as dict:
>>> schema = Schema({}, extra=ALLOW_EXTRA) # don't do this
>>> try:
... schema({'extra': 1})
... raise AssertionError('MultipleInvalid not raised')
... except MultipleInvalid as e:
... exc = e
>>> str(exc) == "not a valid value"
True
>>> schema({})
{}
>>> schema = Schema(dict) # do this instead
>>> schema({})
{}
>>> schema({'extra': 1})
{'extra': 1}
```
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90361c262c4d3261325c2b7dbfa5441f.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112cb0c47ac5031aacd74a5b18b4a418e2.
* Revert "Give good example."
This reverts commit 4f90fc4be677634fc7e951b4b79aa57c8213b8f8.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187e32521e2f51cf2183a9070ee093bd0.
* Update pysesame requirement to 0.1.0 to support caching
* Set `available` property based on API enabled status
* Add state attributes for device ID and battery level
* osram lightify removed duplicated set in case of brightness changes
* lightify component: anticipate brightness evaluation to handle unconsidered scenario described in the PR request comments (light turned on with color/temperature)
* Correction for travis ci error:
undefined name 'transition'
SHOW DIAGNOSTICS always needs admin privileges on influxdb. For
the purposes of home-assistant this is too much.
Use 'SHOW SERIES' to have a relatively lightweight query which
only needs READ privileges.
* add option to display all sources / pushed to version 0.4.3 of library
* Add show_all_sources option for auto discovery too
* change code style for hass
* fix lint
* Add support for Vanderbilt SPC alarm panels.
* Arm/disarm + read state
* Autodiscover and add motion sensors
* Fix code formatting.
* Use asyncio.async for Python < 3.4.4.
* Fix for moved aiohttp exceptions.
* Add docstrings.
* Fix tests and add docstrings.
* Added buienradar sensor and weather
* used external library for parsing
* used external library for parsing
* updated buienradar lib to 0.4
* Make sure you import 3rd party libraries inside methods.
* Make sure you import 3rd party libraries inside methods.
* clean up code; optimized
* imports, sensor name and attributes
* updated requirements to match imports
* use asyncio for http get
* Add service to set nest away/home modes
* New service `nest.set_mode`
* Update the NestDevice object to export the local structures
* Validation and structure cleanup
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90361c262c4d3261325c2b7dbfa5441f.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112cb0c47ac5031aacd74a5b18b4a418e2.
* Revert "Give good example."
This reverts commit 4f90fc4be677634fc7e951b4b79aa57c8213b8f8.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187e32521e2f51cf2183a9070ee093bd0.
* Added effects to Yeelight bulbs
* Fix Typo and Use randint instead of randrange
* Added Effects
* updated requirements_all.txt
* fix empty line
* minor fixes
* fix passing effects as parameter
* Fix#7758 subscription expiration/removal
Removes a subscription after receiving an HTTP 410 response when trying to send a new message.
* Fix tests failing due to additional call
* Fix code style
* Lint
* Check if media commands are actually applicable
- Explicitly allow ‘stop’ and ‘play’ on radio streams
- Disallow media commands when the playlist is empty
- Check if command is supported when calling `turn_on` and `turn_off`
* Suppress UPnP error 701 on media commands
* Clean up soco_filter_upnperror
Clean up soco_filter_upnperror and fix small bug in support_previous_track determination
* Start of migration framework, to allow moving of files in the config directory to be hidden, ios.conf used as the first one to undergo this change.
* Update const.py
* Update test_config.py
* improvement to syntax
* log time delay of domain setup in info level
* when setup problems appear, it's difficult to debug which are the components that took a lot to set up. This minimal change goes further than the 'slow setup warning' and measures the setup time interval for each domain.
* use timer as in helpers/entity
* Introduced support to Netgear Arlo Cameras
* Using async_setup_platform() and applied other changes
* Removed unecessary variables
* Using asyncio for sensor/arlo
* Update arlo.py
* Removed entity_namespace
Downgrades the Dockerfiles used by Home Assistant to Python 3.5, after
Python 3.6 base image was causing segmentation faults.
See home-assistant/home-assistant#7752
* Show persistent error if cover.myq fails
* Fixed typo on getLogger()
* Added ValueError on except condition
* Make pylint happy
* Removed DEFAULT_ENTITY_NAMESPACE since it is not being used
* Add `name` var to BytesIO content to get recognized
Sometimes the python-telegram-bot doesn't recognize the mimetype of the file and looks after a name variable to deduce it. Fixes#7413
* bytesio stream recycle less explicit
* Rachio platform started
* Rachio tests
* detect bad api token
* Documentation, Code cleanup
* Docstrings end with a period, log uses %
* Fix arguments, default run time is now 10 minutes
* Fix typo, remove todo (GH issue exists)
* Revert polymer submodule commit
* Use a RachioPy version with SSL cert validation
* Update requirements
* first commit
* first commit
* first commit
* first commit
* changing requirements
* updated requirements_all.txt
* various changes as suggested in the comments.
* using global values for dict keys.
* Remove setting up an hbmqtt broker
* Don't pass loop to web.Application in tests
* Use .query instead of deprecated .GET for aiohttp requests
* Fix closing file resource
* Do not use asyncio mark
* Notify.html5 - PyJWT: Use options to disable verify
* Yamaha: Test was still using deprecated ip
* Remove pytest-asyncio
* fix double template rendering when messages come from notify.telegram
* fix 'chat' information not present in callback queries
* better inline keyboards with yaml
To make a row of InlineKeyboardButtons you pass:
- a list of tuples like: `[(text_b1, data_callback_b1), (text_b2, data_callback_b2), ...]
- a string like: `/cmd1, /cmd2, /cmd3`
- or a string like: `text_b1:/cmd1, text_b2:/cmd2`
Example:
```yaml
data:
message: 'TV is off'
disable_notification: true
inline_keyboard:
- TV ON:/service_call switch.turn_on switch.tv, Other:/othercmd
- /help, /init
```
* fix send file to multiple targets
* fix message templating, multiple file targets, HA cameras
- Allow templating for caption, url, file, longitude and latitude fields
- Fix send a file to multiple targets
- Load data with some retrying for HA cameras, which return 500 one or two times sometimes (generic cams, always!).
- Doc in services for new inline keyboards yaml syntax: `Text button:/command`
* HttpDigest authentication as proposed in #7396
* review changes
- Don't use `file` as variable name.
- For loop
- Simplify filter allowed `chat_id`s.
* Don't use `file` as variable name!
* make params outside the while loop
* fix chat_id validation when editing sent messages
Using `python setup.py develop` did not manage to install the required dependencies.
This updates `script/setup` to use `pip install -e .` instead in order to resolve the required dependencies.
* starting light template component
* linting/flaking
* starting unit tests from copypasta
* working on unit testing
* forgot to commit the test
* wrapped up unit testing
* adding remote back
* updates post running tox
* Revert "adding remote back"
This reverts commit 852c87ff9694dfc48e92b74fd9dbafbc164a2393.
* adding submodule back from origin
* updating submodule
* removing a line to commit
* re-adding line
* trying to update line endings
* trying to fix line endings
* trying a different approach
* making requested changes, need to fix tests
* flaking
* union rather than intersect; makes a big difference
* more tests passing, not sure why this one's failing
* got it working
* most of the requested changes
* hopefully done now
* sets; the more you know
* Added new commands and functionality to the harmony remote component.
-This includes the ability to optionally specify a number of times to repeat a specific command, such as pressing the volume button multiple times.
-Also added a new command that allows you to send multiple commands to the harmony at once, such as sending a set of channel numbers.
-Updated the unit tests for these changes.
* Fix flake8 coding violations
* Remove send_commands command and make send_command handle a single or list of commands
* Remove send_commands tests
* Update itach and kira remotes for new send_command structure. Fix pyharmony version in requirements_all.txt
* Fix incorrect variable name
* Fix a couple minor issues with remote tests
* Redesign monitored variables
Allow generating specific sensors without the need for template sensors
* Import 3rd party library inside update method
* Remove jsonpath_rw dependency
* Do not interfere with value_template or ilo_data output
Do not interfere with value_template or ilo_data output, this is now the responsibility of the user and should be handled in `configuration.yaml`
Fix UnusedImportStatement
Fix newline after function docstring
* Always output results to state
The product type is already established in order to decide the Kelvin range
so just reuse that information to disable color features for white-only lights.
Also change the breathe/pulse effects to be more useful for white-only
bulbs. For consistency, color bulbs set to a desaturated (i.e. white-ish)
color get the same default treatment as white-only bulbs.
* Make ssh and telnet connections continuous in asuswrt
* Refactored SSH and Telnet connections into respective classes.
* Fixed several copy-paste typos and errors.
* More typos fixed.
* Small changes to arguments, to pass automated tests.
* Removed unsupported named arguments.
* Fixed a couple of mistakes in Telnet, and other lint errors.
* Added Telnet tests, and added lint exceptions.
* Removed comments from tests, as they irritated the hound.
If OpenWRT isn't running the DHCP server then some OpenWRT hardware,
such as TP-Link TL-WDR3600 v1, can't determine the host
corresponding to an associated wifi client. This change handles that
by returning None when the request has no data in the result.
* bugfix for Telegram chat_ids
- Negative `chat_id`s for groups.
- Include `chat_id` in event data.
- Handle KeyError when receiving other types of messages, as `new_chat_member` ones, and send them as text.
* unused import
* fix double quote style, fix boolean expr, change warning msg
* mistake
* some more fixes
- fix if condition for msg bad fields.
- return True for a correct but not allowed or not recognized message: if not, the message arrives continuously.
- Allow to receive messages from unauthorized users if they come from authorized groups.
* support for `edited_message`s
- They come as normal messages, except for the 'edited_message' field instead of 'message'.
If OpenWRT isn't running the DHCP server then some OpenWRT hardware,
such as TP-Link TL-WDR3600 v1, can't determine the host
corresponding to an associated wifi client. This change handles that
by returning None when the request has no data in the result.
* bugfix for Telegram chat_ids
- Negative `chat_id`s for groups.
- Include `chat_id` in event data.
- Handle KeyError when receiving other types of messages, as `new_chat_member` ones, and send them as text.
* unused import
* fix double quote style, fix boolean expr, change warning msg
* mistake
* some more fixes
- fix if condition for msg bad fields.
- return True for a correct but not allowed or not recognized message: if not, the message arrives continuously.
- Allow to receive messages from unauthorized users if they come from authorized groups.
* support for `edited_message`s
- They come as normal messages, except for the 'edited_message' field instead of 'message'.
Prior to this change the zoneminder component was attempting to
use logging.exception outside of exception handling code. This
would lead to the traceback module throwing an exception when
trying to work out the traceback for the exception.
This fixes the issue by changing the exception call into a
plain error logging call.
* Ignore attribute changes in automation trigger from/to
* Quote names in deprecation warnings
This makes it somewhat easier to read if the suggestion happens to be
named "to".
* Add test with same state, new attribute value
* Remove global hass
* Http.auth test no longer spin up server
* Remove server usage from http.ban test
* Remove setupModule from test device_sun_light_trigger
* Update common.py
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* Modify set_config_parameter to accept setting string values
* descriptions
* Tweaks
* Tweaks
* Tweaks
* Tweaks
* lint
* Fallback if no config parameteres are available
* Update services.yaml
* review changes
* Implemented ffmpeg option on Amcrest camera and upgraded to version 1.2.0
* Added ffmpeg arguments and binary options to Amcrest camera
* Added ffmpeg as dependencies
* Makes lint happy and fixed requirements_all.txt
* Inherent the ffmpeg.binary configuration from ffmpeg component
* Update amcrest.py
@@ -4,11 +4,11 @@ Everybody is invited and welcome to contribute to Home Assistant. There is a lot
The process is straight-forward.
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/devel/faster_reviews.md) by Kubernetes (but skip step 0)
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/devel/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0)
- Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
- Write the code for your device, notification service, sensor, or IoT thing.
- Ensure tests work.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details.
Still interested? Then you should take a peek at the [developer documentation](https://home-assistant.io/developers/) to get more details.
Home Assistant |Build Status| |Coverage Status| |Join the chat at https://gitter.im/home-assistant/home-assistant| |Join the dev chat at https://gitter.im/home-assistant/home-assistant/devs|
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
@@ -31,10 +31,8 @@ of a component, check the `Home Assistant help section <https://home-assistant.i
"""Return the state attributes of the Linode Node."""
ifself.data:
return{
ATTR_CREATED:self.data.created,
ATTR_NODE_ID:self.data.id,
ATTR_NODE_NAME:self.data.label,
ATTR_IPV4_ADDRESS:self.data.ipv4,
ATTR_IPV6_ADDRESS:self.data.ipv6,
ATTR_MEMORY:self.data.specs.memory,
ATTR_REGION:self.data.region.country,
ATTR_VCPUS:self.data.specs.vcpus,
}
return{}
defupdate(self):
"""Update state of sensor."""
self._linode.update()
ifself._linode.dataisnotNone:
fornodeinself._linode.data:
ifnode.id==self._node_id:
self.data=node
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
