Merge pull request #71444 from home-assistant/rc

* fix devices that do not report state

* whoops

.coveragerc

@@ -73,7 +73,6 @@ omit =
     homeassistant/components/arest/binary_sensor.py
     homeassistant/components/arest/sensor.py
     homeassistant/components/arest/switch.py
-    homeassistant/components/arlo/*
     homeassistant/components/arris_tg2492lg/*
     homeassistant/components/aruba/device_tracker.py
     homeassistant/components/arwn/sensor.py
@@ -83,9 +82,7 @@ omit =
     homeassistant/components/aseko_pool_live/sensor.py
     homeassistant/components/asterisk_cdr/mailbox.py
     homeassistant/components/asterisk_mbox/*
-    homeassistant/components/asuswrt/__init__.py
     homeassistant/components/asuswrt/diagnostics.py
-    homeassistant/components/asuswrt/router.py
     homeassistant/components/aten_pe/*
     homeassistant/components/atome/*
     homeassistant/components/aurora/__init__.py
@@ -120,6 +117,7 @@ omit =
     homeassistant/components/bmw_connected_drive/__init__.py
     homeassistant/components/bmw_connected_drive/binary_sensor.py
     homeassistant/components/bmw_connected_drive/button.py
+    homeassistant/components/bmw_connected_drive/coordinator.py
     homeassistant/components/bmw_connected_drive/device_tracker.py
     homeassistant/components/bmw_connected_drive/lock.py
     homeassistant/components/bmw_connected_drive/notify.py
@@ -215,7 +213,6 @@ omit =
     homeassistant/components/devolo_home_control/subscriber.py
     homeassistant/components/devolo_home_control/switch.py
     homeassistant/components/digital_ocean/*
-    homeassistant/components/digitalloggers/switch.py
     homeassistant/components/discogs/sensor.py
     homeassistant/components/discord/__init__.py
     homeassistant/components/discord/notify.py
@@ -593,10 +590,6 @@ omit =
     homeassistant/components/keyboard_remote/*
     homeassistant/components/kira/*
     homeassistant/components/kiwi/lock.py
-    homeassistant/components/knx/__init__.py
-    homeassistant/components/knx/climate.py
-    homeassistant/components/knx/cover.py
-    homeassistant/components/knx/notify.py
     homeassistant/components/kodi/__init__.py
     homeassistant/components/kodi/browse_media.py
     homeassistant/components/kodi/const.py
@@ -678,6 +671,9 @@ omit =
     homeassistant/components/map/*
     homeassistant/components/mastodon/notify.py
     homeassistant/components/matrix/*
+    homeassistant/components/meater/__init__.py
+    homeassistant/components/meater/const.py
+    homeassistant/components/meater/sensor.py
     homeassistant/components/media_extractor/*
     homeassistant/components/mediaroom/media_player.py
     homeassistant/components/melcloud/__init__.py
@@ -996,7 +992,8 @@ omit =
     homeassistant/components/rtorrent/sensor.py
     homeassistant/components/russound_rio/media_player.py
     homeassistant/components/russound_rnet/media_player.py
-    homeassistant/components/sabnzbd/*
+    homeassistant/components/sabnzbd/__init__.py
+    homeassistant/components/sabnzbd/sensor.py
     homeassistant/components/saj/sensor.py
     homeassistant/components/satel_integra/*
     homeassistant/components/schluter/*
@@ -1030,6 +1027,10 @@ omit =
     homeassistant/components/sensibo/number.py
     homeassistant/components/sensibo/select.py
     homeassistant/components/sensibo/sensor.py
+    homeassistant/components/sensibo/update.py
+    homeassistant/components/senz/__init__.py
+    homeassistant/components/senz/api.py
+    homeassistant/components/senz/climate.py
     homeassistant/components/serial/sensor.py
     homeassistant/components/serial_pm/sensor.py
     homeassistant/components/sesame/lock.py
@@ -1128,6 +1129,8 @@ omit =
     homeassistant/components/spotify/media_player.py
     homeassistant/components/spotify/system_health.py
     homeassistant/components/spotify/util.py
+    homeassistant/components/slimproto/__init__.py
+    homeassistant/components/slimproto/media_player.py
     homeassistant/components/squeezebox/__init__.py
     homeassistant/components/squeezebox/browse_media.py
     homeassistant/components/squeezebox/media_player.py
@@ -1177,6 +1180,7 @@ omit =
     homeassistant/components/synology_dsm/camera.py
     homeassistant/components/synology_dsm/diagnostics.py
     homeassistant/components/synology_dsm/common.py
+    homeassistant/components/synology_dsm/entity.py
     homeassistant/components/synology_dsm/sensor.py
     homeassistant/components/synology_dsm/service.py
     homeassistant/components/synology_dsm/switch.py
@@ -1201,7 +1205,7 @@ omit =
     homeassistant/components/tankerkoenig/const.py
     homeassistant/components/tankerkoenig/sensor.py
     homeassistant/components/tapsaff/binary_sensor.py
-    homeassistant/components/tautulli/const.py
+    homeassistant/components/tautulli/__init__.py
     homeassistant/components/tautulli/coordinator.py
     homeassistant/components/tautulli/sensor.py
     homeassistant/components/ted5000/sensor.py
@@ -1265,6 +1269,7 @@ omit =
     homeassistant/components/tractive/__init__.py
     homeassistant/components/tractive/binary_sensor.py
     homeassistant/components/tractive/device_tracker.py
+    homeassistant/components/tractive/diagnostics.py
     homeassistant/components/tractive/entity.py
     homeassistant/components/tractive/sensor.py
     homeassistant/components/tractive/switch.py
@@ -1276,6 +1281,9 @@ omit =
     homeassistant/components/tradfri/light.py
     homeassistant/components/tradfri/sensor.py
     homeassistant/components/tradfri/switch.py
+    homeassistant/components/trafikverket_ferry/__init__.py
+    homeassistant/components/trafikverket_ferry/coordinator.py
+    homeassistant/components/trafikverket_ferry/sensor.py
     homeassistant/components/trafikverket_train/__init__.py
     homeassistant/components/trafikverket_train/sensor.py
     homeassistant/components/trafikverket_weatherstation/__init__.py
@@ -1365,6 +1373,7 @@ omit =
     homeassistant/components/vicare/button.py
     homeassistant/components/vicare/climate.py
     homeassistant/components/vicare/const.py
+    homeassistant/components/vicare/diagnostics.py
     homeassistant/components/vicare/__init__.py
     homeassistant/components/vicare/sensor.py
     homeassistant/components/vicare/water_heater.py
@@ -1428,6 +1437,7 @@ omit =
     homeassistant/components/xiaomi_miio/button.py
     homeassistant/components/xiaomi_miio/device.py
     homeassistant/components/xiaomi_miio/device_tracker.py
+    homeassistant/components/xiaomi_miio/diagnostics.py
     homeassistant/components/xiaomi_miio/fan.py
     homeassistant/components/xiaomi_miio/gateway.py
     homeassistant/components/xiaomi_miio/humidifier.py
@@ -1443,6 +1453,7 @@ omit =
     homeassistant/components/yale_smart_alarm/__init__.py
     homeassistant/components/yale_smart_alarm/alarm_control_panel.py
     homeassistant/components/yale_smart_alarm/binary_sensor.py
+    homeassistant/components/yale_smart_alarm/button.py
     homeassistant/components/yale_smart_alarm/const.py
     homeassistant/components/yale_smart_alarm/coordinator.py
     homeassistant/components/yale_smart_alarm/diagnostics.py
@@ -1452,6 +1463,7 @@ omit =
     homeassistant/components/yamaha_musiccast/media_player.py
     homeassistant/components/yamaha_musiccast/number.py
     homeassistant/components/yamaha_musiccast/select.py
+    homeassistant/components/yamaha_musiccast/switch.py
     homeassistant/components/yandex_transport/*
     homeassistant/components/yeelightsunflower/light.py
     homeassistant/components/yi/camera.py
@@ -1489,6 +1501,7 @@ omit =
     homeassistant/components/zwave_me/button.py
     homeassistant/components/zwave_me/cover.py
     homeassistant/components/zwave_me/climate.py
+    homeassistant/components/zwave_me/fan.py
     homeassistant/components/zwave_me/helpers.py
     homeassistant/components/zwave_me/light.py
     homeassistant/components/zwave_me/lock.py

.devcontainer/devcontainer.json

@@ -11,7 +11,8 @@
     "ms-python.vscode-pylance",
     "visualstudioexptteam.vscodeintellicode",
     "redhat.vscode-yaml",
-    "esbenp.prettier-vscode"
+    "esbenp.prettier-vscode",
+    "GitHub.vscode-pull-request-github"
   ],
   // Please keep this file in sync with settings in home-assistant/.vscode/settings.default.json
   "settings": {

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -78,12 +78,13 @@ body:
   - type: textarea
     attributes:
       label: Diagnostics information
+      placeholder: "drag-and-drop the diagnostics data file here (do not copy-and-paste the content)"
       description: >-
         Many integrations provide the ability to download diagnostic data
         on the device page (and on the integration dashboard).
 
         **It would really help if you could download the diagnostics data for the device you are having issues with,
-        and drag-and-drop that file into the textbox below.**
+        and <ins>drag-and-drop that file into the textbox below.</ins>**
 
         It generally allows pinpointing defects and thus resolving issues faster.
   - type: textarea

.github/workflows/builder.yml

@@ -24,12 +24,12 @@ jobs:
       publish: ${{ steps.version.outputs.publish }}
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
         with:
           fetch-depth: 0
 
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
 
@@ -67,10 +67,10 @@ jobs:
     if: github.repository_owner == 'home-assistant' && needs.init.outputs.publish == 'true'
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
 
@@ -100,11 +100,11 @@ jobs:
         arch: ${{ fromJson(needs.init.outputs.architectures) }}
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         if: needs.init.outputs.channel == 'dev'
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
 
@@ -173,7 +173,7 @@ jobs:
           - tinker
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Set build additional args
         run: |
@@ -216,7 +216,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Initialize git
         uses: home-assistant/actions/helpers/git-init@master
@@ -255,7 +255,7 @@ jobs:
           - "homeassistant"
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Login to DockerHub
         if: matrix.registry == 'homeassistant'

.github/workflows/ci.yaml

@@ -22,7 +22,7 @@ on:
 env:
   CACHE_VERSION: 9
   PIP_CACHE_VERSION: 3
-  HA_SHORT_VERSION: 2022.4
+  HA_SHORT_VERSION: 2022.5
   DEFAULT_PYTHON: 3.9
   PRE_COMMIT_CACHE: ~/.cache/pre-commit
   PIP_CACHE: /tmp/pip-cache
@@ -51,7 +51,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Filter for core changes
         uses: dorny/paths-filter@v2.10.2
         id: core
@@ -152,10 +152,10 @@ jobs:
       pre-commit-key: ${{ steps.generate-pre-commit-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Generate partial Python venv restore key
@@ -172,7 +172,7 @@ jobs:
             env.HA_SHORT_VERSION }}-$(date -u '+%Y-%m-%dT%H:%M:%s')"
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: >-
@@ -189,7 +189,7 @@ jobs:
           #   ${{ runner.os }}-${{ steps.python.outputs.python-version }}-base-venv-${{ env.CACHE_VERSION }}-
       - name: Restore pip wheel cache
         if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PIP_CACHE }}
           key: >-
@@ -212,7 +212,7 @@ jobs:
             hashFiles('.pre-commit-config.yaml') }}"
       - name: Restore pre-commit environment from cache
         id: cache-precommit
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PRE_COMMIT_CACHE }}
           key: >-
@@ -233,15 +233,15 @@ jobs:
       - prepare-base
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-${{
@@ -253,7 +253,7 @@ jobs:
           exit 1
       - name: Restore pre-commit environment from cache
         id: cache-precommit
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PRE_COMMIT_CACHE }}
           key: ${{ runner.os }}-${{ needs.prepare-base.outputs.pre-commit-key }}
@@ -283,15 +283,15 @@ jobs:
       - prepare-base
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-${{
@@ -303,7 +303,7 @@ jobs:
           exit 1
       - name: Restore pre-commit environment from cache
         id: cache-precommit
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PRE_COMMIT_CACHE }}
           key: ${{ runner.os }}-${{ needs.prepare-base.outputs.pre-commit-key }}
@@ -334,15 +334,15 @@ jobs:
     needs: prepare-base
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-${{
@@ -354,7 +354,7 @@ jobs:
           exit 1
       - name: Restore pre-commit environment from cache
         id: cache-precommit
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PRE_COMMIT_CACHE }}
           key: ${{ runner.os }}-${{ needs.prepare-base.outputs.pre-commit-key }}
@@ -376,15 +376,15 @@ jobs:
       - prepare-base
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-${{
@@ -396,7 +396,7 @@ jobs:
           exit 1
       - name: Restore pre-commit environment from cache
         id: cache-precommit
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PRE_COMMIT_CACHE }}
           key: ${{ runner.os }}-${{ needs.prepare-base.outputs.pre-commit-key }}
@@ -435,11 +435,19 @@ jobs:
           . venv/bin/activate
           pre-commit run --hook-stage manual check-json --all-files
 
-      - name: Run prettier
+      - name: Run prettier (fully)
+        if: needs.changes.outputs.test_full_suite == 'true'
         run: |
           . venv/bin/activate
           pre-commit run --hook-stage manual prettier --all-files
 
+      - name: Run prettier (partially)
+        if: needs.changes.outputs.test_full_suite == 'false'
+        shell: bash
+        run: |
+          . venv/bin/activate
+          pre-commit run --hook-stage manual prettier --files {homeassistant,tests}/components/${{ needs.changes.outputs.integrations_glob }}/**/*
+
       - name: Register check executables problem matcher
         run: |
           echo "::add-matcher::.github/workflows/matchers/check-executables-have-shebangs.json"
@@ -491,10 +499,10 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ matrix.python-version }}-${{
@@ -515,15 +523,15 @@ jobs:
     needs: prepare-base
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-${{
@@ -550,7 +558,7 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Generate partial Python venv restore key
         id: generate-python-key
         run: >-
@@ -565,7 +573,7 @@ jobs:
             env.HA_SHORT_VERSION }}-$(date -u '+%Y-%m-%dT%H:%M:%s')"
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: >-
@@ -582,7 +590,7 @@ jobs:
           #   ${{ runner.os }}-${{ matrix.python-version }}-venv-${{ env.CACHE_VERSION }}-
       - name: Restore pip wheel cache
         if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: ${{ env.PIP_CACHE }}
           key: >-
@@ -618,10 +626,10 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ matrix.python-version }}-${{
@@ -660,10 +668,10 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ matrix.python-version }}-${{
@@ -704,10 +712,10 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ matrix.python-version }}-${{
@@ -747,10 +755,10 @@ jobs:
     container: homeassistant/ci-azure:${{ matrix.python-version }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
-        uses: actions/cache@v3.0.0
+        uses: actions/cache@v3.0.2
         with:
           path: venv
           key: ${{ runner.os }}-${{ matrix.python-version }}-${{
@@ -835,14 +843,14 @@ jobs:
       - pytest
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
       - name: Download all coverage artifacts
-        uses: actions/download-artifact@v2
+        uses: actions/download-artifact@v3
       - name: Upload coverage to Codecov (full coverage)
         if: needs.changes.outputs.test_full_suite == 'true'
-        uses: codecov/codecov-action@v2.1.0
+        uses: codecov/codecov-action@v3.1.0
         with:
           flags: full-suite
       - name: Upload coverage to Codecov (partial coverage)
         if: needs.changes.outputs.test_full_suite == 'false'
-        uses: codecov/codecov-action@v2.1.0
+        uses: codecov/codecov-action@v3.1.0

.github/workflows/stale.yml

@@ -8,6 +8,7 @@ on:
 
 jobs:
   stale:
+    if: github.repository_owner == 'home-assistant'
     runs-on: ubuntu-latest
     steps:
       # The 90 day stale policy
@@ -16,7 +17,7 @@ jobs:
       # - No PRs marked as no-stale
       # - No issues marked as no-stale or help-wanted
       - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v4
+        uses: actions/stale@v5
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 90
@@ -53,7 +54,7 @@ jobs:
       # - No PRs marked as no-stale or new-integrations
       # - No issues (-1)
       - name: 30 days stale PRs policy
-        uses: actions/stale@v4
+        uses: actions/stale@v5
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 30
@@ -78,7 +79,7 @@ jobs:
       # - No Issues marked as no-stale or help-wanted
       # - No PRs (-1)
       - name: Needs more information stale issues policy
-        uses: actions/stale@v4
+        uses: actions/stale@v5
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           only-labels: "needs-more-information"

.github/workflows/translations.yaml

@@ -21,10 +21,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
 
@@ -40,10 +40,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v3.0.0
+        uses: actions/setup-python@v3.1.2
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
 

.github/workflows/wheels.yml

@@ -22,7 +22,7 @@ jobs:
       architectures: ${{ steps.info.outputs.architectures }}
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Get information
         id: info
@@ -74,15 +74,15 @@ jobs:
           - "3.9-alpine3.14"
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Download env_file
-        uses: actions/download-artifact@v2
+        uses: actions/download-artifact@v3
         with:
           name: env_file
 
       - name: Download requirements_diff
-        uses: actions/download-artifact@v2
+        uses: actions/download-artifact@v3
         with:
           name: requirements_diff
 
@@ -115,15 +115,15 @@ jobs:
           - "3.9-alpine3.14"
     steps:
       - name: Checkout the repository
-        uses: actions/checkout@v3.0.0
+        uses: actions/checkout@v3.0.2
 
       - name: Download env_file
-        uses: actions/download-artifact@v2
+        uses: actions/download-artifact@v3
         with:
           name: env_file
 
       - name: Download requirements_diff
-        uses: actions/download-artifact@v2
+        uses: actions/download-artifact@v3
         with:
           name: requirements_diff
 

.pre-commit-config.yaml

@@ -1,6 +1,6 @@
 repos:
   - repo: https://github.com/asottile/pyupgrade
-    rev: v2.31.1
+    rev: v2.32.0
     hooks:
       - id: pyupgrade
         args: [--py39-plus]

.strict-typing

@@ -46,6 +46,7 @@ homeassistant.components.ambient_station.*
 homeassistant.components.amcrest.*
 homeassistant.components.ampio.*
 homeassistant.components.aseko_pool_live.*
+homeassistant.components.asuswrt.*
 homeassistant.components.automation.*
 homeassistant.components.backup.*
 homeassistant.components.binary_sensor.*
@@ -62,11 +63,7 @@ homeassistant.components.canary.*
 homeassistant.components.cover.*
 homeassistant.components.crownstone.*
 homeassistant.components.cpuspeed.*
-homeassistant.components.deconz
-homeassistant.components.deconz.config_flow
-homeassistant.components.deconz.diagnostics
-homeassistant.components.deconz.gateway
-homeassistant.components.deconz.services
+homeassistant.components.deconz.*
 homeassistant.components.device_automation.*
 homeassistant.components.device_tracker.*
 homeassistant.components.devolo_home_control.*
@@ -78,6 +75,7 @@ homeassistant.components.dsmr.*
 homeassistant.components.dunehd.*
 homeassistant.components.efergy.*
 homeassistant.components.elgato.*
+homeassistant.components.elkm1.*
 homeassistant.components.esphome.*
 homeassistant.components.energy.*
 homeassistant.components.evil_genius_labs.*
@@ -88,6 +86,7 @@ homeassistant.components.flunearyou.*
 homeassistant.components.flux_led.*
 homeassistant.components.forecast_solar.*
 homeassistant.components.fritzbox.*
+homeassistant.components.fritzbox_callmonitor.*
 homeassistant.components.fronius.*
 homeassistant.components.frontend.*
 homeassistant.components.fritz.*
@@ -196,6 +195,7 @@ homeassistant.components.scene.*
 homeassistant.components.select.*
 homeassistant.components.sensor.*
 homeassistant.components.senseme.*
+homeassistant.components.senz.*
 homeassistant.components.shelly.*
 homeassistant.components.simplisafe.*
 homeassistant.components.slack.*

CODEOWNERS

@@ -56,7 +56,6 @@ build.json @home-assistant/supervisor
 /tests/components/alexa/ @home-assistant/cloud @ochlocracy
 /homeassistant/components/almond/ @gcampax @balloob
 /tests/components/almond/ @gcampax @balloob
-/homeassistant/components/alpha_vantage/ @fabaff
 /homeassistant/components/ambee/ @frenck
 /tests/components/ambee/ @frenck
 /homeassistant/components/amberelectric/ @madpilot
@@ -82,7 +81,6 @@ build.json @home-assistant/supervisor
 /tests/components/aprs/ @PhilRW
 /homeassistant/components/arcam_fmj/ @elupus
 /tests/components/arcam_fmj/ @elupus
-/homeassistant/components/arest/ @fabaff
 /homeassistant/components/arris_tg2492lg/ @vanbalken
 /homeassistant/components/aseko_pool_live/ @milanmeu
 /tests/components/aseko_pool_live/ @milanmeu
@@ -121,7 +119,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/beewi_smartclim/ @alemuro
 /homeassistant/components/binary_sensor/ @home-assistant/core
 /tests/components/binary_sensor/ @home-assistant/core
-/homeassistant/components/bitcoin/ @fabaff
 /homeassistant/components/bizkaibus/ @UgaitzEtxebarria
 /homeassistant/components/blebox/ @bbx-a @bbx-jp
 /tests/components/blebox/ @bbx-a @bbx-jp
@@ -253,7 +250,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/dunehd/ @bieniu
 /tests/components/dunehd/ @bieniu
 /homeassistant/components/dwd_weather_warnings/ @runningman84 @stephan192 @Hummel95
-/homeassistant/components/dweet/ @fabaff
 /homeassistant/components/dynalite/ @ziv1234
 /tests/components/dynalite/ @ziv1234
 /homeassistant/components/eafm/ @Jc2k
@@ -332,7 +328,6 @@ build.json @home-assistant/supervisor
 /tests/components/flipr/ @cnico
 /homeassistant/components/flo/ @dmulcahey
 /tests/components/flo/ @dmulcahey
-/homeassistant/components/flock/ @fabaff
 /homeassistant/components/flume/ @ChrisMandich @bdraco
 /tests/components/flume/ @ChrisMandich @bdraco
 /homeassistant/components/flunearyou/ @bachya
@@ -354,6 +349,8 @@ build.json @home-assistant/supervisor
 /tests/components/fritz/ @mammuth @AaronDavidSchneider @chemelli74 @mib1185
 /homeassistant/components/fritzbox/ @mib1185 @flabbamann
 /tests/components/fritzbox/ @mib1185 @flabbamann
+/homeassistant/components/fritzbox_callmonitor/ @cdce8p
+/tests/components/fritzbox_callmonitor/ @cdce8p
 /homeassistant/components/fronius/ @nielstron @farmio
 /tests/components/fronius/ @nielstron @farmio
 /homeassistant/components/frontend/ @home-assistant/frontend
@@ -381,9 +378,8 @@ build.json @home-assistant/supervisor
 /tests/components/gios/ @bieniu
 /homeassistant/components/github/ @timmo001 @ludeeus
 /tests/components/github/ @timmo001 @ludeeus
-/homeassistant/components/gitter/ @fabaff
-/homeassistant/components/glances/ @fabaff @engrbm87
-/tests/components/glances/ @fabaff @engrbm87
+/homeassistant/components/glances/ @engrbm87
+/tests/components/glances/ @engrbm87
 /homeassistant/components/goalzero/ @tkdrob
 /tests/components/goalzero/ @tkdrob
 /homeassistant/components/gogogate2/ @vangorra @bdraco
@@ -476,8 +472,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/image_processing/ @home-assistant/core
 /tests/components/image_processing/ @home-assistant/core
 /homeassistant/components/incomfort/ @zxdavb
-/homeassistant/components/influxdb/ @fabaff @mdegat01
-/tests/components/influxdb/ @fabaff @mdegat01
+/homeassistant/components/influxdb/ @mdegat01
+/tests/components/influxdb/ @mdegat01
 /homeassistant/components/input_boolean/ @home-assistant/core
 /tests/components/input_boolean/ @home-assistant/core
 /homeassistant/components/input_button/ @home-assistant/core
@@ -554,6 +550,7 @@ build.json @home-assistant/supervisor
 /tests/components/lcn/ @alengwenus
 /homeassistant/components/lg_netcast/ @Drafteed
 /homeassistant/components/life360/ @pnbruckner
+/homeassistant/components/lifx/ @Djelibeybi
 /homeassistant/components/light/ @home-assistant/core
 /tests/components/light/ @home-assistant/core
 /homeassistant/components/linux_battery/ @fabaff
@@ -588,6 +585,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/matrix/ @tinloaf
 /homeassistant/components/mazda/ @bdr99
 /tests/components/mazda/ @bdr99
+/homeassistant/components/meater/ @Sotolotl @emontnemery
+/tests/components/meater/ @Sotolotl @emontnemery
 /homeassistant/components/media_player/ @home-assistant/core
 /tests/components/media_player/ @home-assistant/core
 /homeassistant/components/media_source/ @hunterjm
@@ -637,7 +636,6 @@ build.json @home-assistant/supervisor
 /tests/components/motion_blinds/ @starkillerOG
 /homeassistant/components/motioneye/ @dermotduffy
 /tests/components/motioneye/ @dermotduffy
-/homeassistant/components/mpd/ @fabaff
 /homeassistant/components/mqtt/ @emontnemery
 /tests/components/mqtt/ @emontnemery
 /homeassistant/components/msteams/ @peroyvind
@@ -684,8 +682,6 @@ build.json @home-assistant/supervisor
 /tests/components/nina/ @DeerMaximum
 /homeassistant/components/nissan_leaf/ @filcole
 /homeassistant/components/nmbs/ @thibmaek
-/homeassistant/components/no_ip/ @fabaff
-/tests/components/no_ip/ @fabaff
 /homeassistant/components/noaa_tides/ @jdelaney72
 /homeassistant/components/notify/ @home-assistant/core
 /tests/components/notify/ @home-assistant/core
@@ -758,8 +754,8 @@ build.json @home-assistant/supervisor
 /tests/components/persistent_notification/ @home-assistant/core
 /homeassistant/components/philips_js/ @elupus
 /tests/components/philips_js/ @elupus
-/homeassistant/components/pi_hole/ @fabaff @johnluetke @shenxn
-/tests/components/pi_hole/ @fabaff @johnluetke @shenxn
+/homeassistant/components/pi_hole/ @johnluetke @shenxn
+/tests/components/pi_hole/ @johnluetke @shenxn
 /homeassistant/components/picnic/ @corneyl
 /tests/components/picnic/ @corneyl
 /homeassistant/components/pilight/ @trekky12
@@ -793,13 +789,15 @@ build.json @home-assistant/supervisor
 /tests/components/pure_energie/ @klaasnicolaas
 /homeassistant/components/push/ @dgomes
 /tests/components/push/ @dgomes
-/homeassistant/components/pvoutput/ @fabaff @frenck
-/tests/components/pvoutput/ @fabaff @frenck
+/homeassistant/components/pvoutput/ @frenck
+/tests/components/pvoutput/ @frenck
 /homeassistant/components/pvpc_hourly_pricing/ @azogue
 /tests/components/pvpc_hourly_pricing/ @azogue
 /homeassistant/components/qbittorrent/ @geoffreylagaisse
 /homeassistant/components/qld_bushfire/ @exxamalte
 /tests/components/qld_bushfire/ @exxamalte
+/homeassistant/components/qnap_qsw/ @Noltari
+/tests/components/qnap_qsw/ @Noltari
 /homeassistant/components/quantum_gateway/ @cisasteelersfan
 /homeassistant/components/qvr_pro/ @oblogic7
 /homeassistant/components/qwikswitch/ @kellerza
@@ -857,6 +855,8 @@ build.json @home-assistant/supervisor
 /tests/components/rtsp_to_webrtc/ @allenporter
 /homeassistant/components/ruckus_unleashed/ @gabe565
 /tests/components/ruckus_unleashed/ @gabe565
+/homeassistant/components/sabnzbd/ @shaiu
+/tests/components/sabnzbd/ @shaiu
 /homeassistant/components/safe_mode/ @home-assistant/core
 /tests/components/safe_mode/ @home-assistant/core
 /homeassistant/components/saj/ @fredericvl
@@ -887,6 +887,8 @@ build.json @home-assistant/supervisor
 /tests/components/sensor/ @home-assistant/core
 /homeassistant/components/sentry/ @dcramer @frenck
 /tests/components/sentry/ @dcramer @frenck
+/homeassistant/components/senz/ @milanmeu
+/tests/components/senz/ @milanmeu
 /homeassistant/components/serial/ @fabaff
 /homeassistant/components/seven_segments/ @fabaff
 /homeassistant/components/sharkiq/ @JeffResc @funkybunch @AritroSaha10
@@ -915,6 +917,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/sleepiq/ @mfugate1 @kbickar
 /tests/components/sleepiq/ @mfugate1 @kbickar
 /homeassistant/components/slide/ @ualex73
+/homeassistant/components/slimproto/ @marcelveldt
+/tests/components/slimproto/ @marcelveldt
 /homeassistant/components/sma/ @kellerza @rklomp
 /tests/components/sma/ @kellerza @rklomp
 /homeassistant/components/smappee/ @bsmappee
@@ -929,8 +933,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/smhi/ @gjohansson-ST
 /tests/components/smhi/ @gjohansson-ST
 /homeassistant/components/sms/ @ocalvo
-/homeassistant/components/smtp/ @fabaff
-/tests/components/smtp/ @fabaff
 /homeassistant/components/solaredge/ @frenck
 /tests/components/solaredge/ @frenck
 /homeassistant/components/solaredge_local/ @drobtravels @scheric
@@ -957,8 +959,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/splunk/ @Bre77
 /homeassistant/components/spotify/ @frenck
 /tests/components/spotify/ @frenck
-/homeassistant/components/sql/ @dgomes
-/tests/components/sql/ @dgomes
+/homeassistant/components/sql/ @dgomes @gjohansson-ST
+/tests/components/sql/ @dgomes @gjohansson-ST
 /homeassistant/components/squeezebox/ @rajlaud
 /tests/components/squeezebox/ @rajlaud
 /homeassistant/components/srp_energy/ @briglx
@@ -967,6 +969,8 @@ build.json @home-assistant/supervisor
 /tests/components/starline/ @anonym-tsk
 /homeassistant/components/statistics/ @fabaff @ThomDietrich
 /tests/components/statistics/ @fabaff @ThomDietrich
+/homeassistant/components/steam_online/ @tkdrob
+/tests/components/steam_online/ @tkdrob
 /homeassistant/components/steamist/ @bdraco
 /tests/components/steamist/ @bdraco
 /homeassistant/components/stiebel_eltron/ @fucm
@@ -1002,7 +1006,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/synology_dsm/ @hacf-fr @Quentame @mib1185
 /tests/components/synology_dsm/ @hacf-fr @Quentame @mib1185
 /homeassistant/components/synology_srm/ @aerialls
-/homeassistant/components/syslog/ @fabaff
 /homeassistant/components/system_bridge/ @timmo001
 /tests/components/system_bridge/ @timmo001
 /homeassistant/components/tado/ @michaelarnauts @north3221
@@ -1016,7 +1019,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/tapsaff/ @bazwilliams
 /homeassistant/components/tasmota/ @emontnemery
 /tests/components/tasmota/ @emontnemery
-/homeassistant/components/tautulli/ @ludeeus
+/homeassistant/components/tautulli/ @ludeeus @tkdrob
+/tests/components/tautulli/ @ludeeus @tkdrob
 /homeassistant/components/tellduslive/ @fredrike
 /tests/components/tellduslive/ @fredrike
 /homeassistant/components/template/ @PhracturedBlue @tetienne @home-assistant/core
@@ -1042,14 +1046,16 @@ build.json @home-assistant/supervisor
 /tests/components/tomorrowio/ @raman325
 /homeassistant/components/totalconnect/ @austinmroczek
 /tests/components/totalconnect/ @austinmroczek
-/homeassistant/components/tplink/ @rytilahti @thegardenmonkey
-/tests/components/tplink/ @rytilahti @thegardenmonkey
+/homeassistant/components/tplink/ @rytilahti @thegardenmonkey @bdraco
+/tests/components/tplink/ @rytilahti @thegardenmonkey @bdraco
 /homeassistant/components/traccar/ @ludeeus
 /tests/components/traccar/ @ludeeus
 /homeassistant/components/trace/ @home-assistant/core
 /tests/components/trace/ @home-assistant/core
 /homeassistant/components/tractive/ @Danielhiversen @zhulik @bieniu
 /tests/components/tractive/ @Danielhiversen @zhulik @bieniu
+/homeassistant/components/trafikverket_ferry/ @gjohansson-ST
+/tests/components/trafikverket_ferry/ @gjohansson-ST
 /homeassistant/components/trafikverket_train/ @endor-force @gjohansson-ST
 /tests/components/trafikverket_train/ @endor-force @gjohansson-ST
 /homeassistant/components/trafikverket_weatherstation/ @endor-force @gjohansson-ST
@@ -1058,8 +1064,8 @@ build.json @home-assistant/supervisor
 /tests/components/transmission/ @engrbm87 @JPHutchins
 /homeassistant/components/tts/ @pvizeli
 /tests/components/tts/ @pvizeli
-/homeassistant/components/tuya/ @Tuya @zlinoliver @METISU @frenck
-/tests/components/tuya/ @Tuya @zlinoliver @METISU @frenck
+/homeassistant/components/tuya/ @Tuya @zlinoliver @frenck
+/tests/components/tuya/ @Tuya @zlinoliver @frenck
 /homeassistant/components/twentemilieu/ @frenck
 /tests/components/twentemilieu/ @frenck
 /homeassistant/components/twinkly/ @dr1rrb @Robbie1221
@@ -1076,8 +1082,6 @@ build.json @home-assistant/supervisor
 /tests/components/upcloud/ @scop
 /homeassistant/components/update/ @home-assistant/core
 /tests/components/update/ @home-assistant/core
-/homeassistant/components/updater/ @home-assistant/core
-/tests/components/updater/ @home-assistant/core
 /homeassistant/components/upnp/ @StevenLooman @ehendrix23
 /tests/components/upnp/ @StevenLooman @ehendrix23
 /homeassistant/components/uptime/ @frenck
@@ -1104,8 +1108,8 @@ build.json @home-assistant/supervisor
 /homeassistant/components/verisure/ @frenck
 /tests/components/verisure/ @frenck
 /homeassistant/components/versasense/ @flamm3blemuff1n
-/homeassistant/components/version/ @fabaff @ludeeus
-/tests/components/version/ @fabaff @ludeeus
+/homeassistant/components/version/ @ludeeus
+/tests/components/version/ @ludeeus
 /homeassistant/components/vesync/ @markperdue @webdjoe @thegardenmonkey
 /tests/components/vesync/ @markperdue @webdjoe @thegardenmonkey
 /homeassistant/components/vicare/ @oischinger

Dockerfile.dev

@@ -19,6 +19,7 @@ RUN \
         libpcap-dev \
         libturbojpeg0 \
         git \
+        cmake \
     && apt-get clean \
     && rm -rf /var/lib/apt/lists/*
 

homeassistant/auth/providers/homeassistant.py

@@ -147,9 +147,7 @@ class Data:
         if not bcrypt.checkpw(password.encode(), user_hash):
             raise InvalidAuth
 
-    def hash_password(  # pylint: disable=no-self-use
-        self, password: str, for_storage: bool = False
-    ) -> bytes:
+    def hash_password(self, password: str, for_storage: bool = False) -> bytes:
         """Encode a password."""
         hashed: bytes = bcrypt.hashpw(password.encode(), bcrypt.gensalt(rounds=12))
 

homeassistant/components/abode/alarm_control_panel.py

@@ -4,10 +4,7 @@ from __future__ import annotations
 from abodepy.devices.alarm import AbodeAlarm as AbodeAl
 
 import homeassistant.components.alarm_control_panel as alarm
-from homeassistant.components.alarm_control_panel.const import (
-    SUPPORT_ALARM_ARM_AWAY,
-    SUPPORT_ALARM_ARM_HOME,
-)
+from homeassistant.components.alarm_control_panel import AlarmControlPanelEntityFeature
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY,
@@ -38,7 +35,10 @@ class AbodeAlarm(AbodeDevice, alarm.AlarmControlPanelEntity):
 
     _attr_icon = ICON
     _attr_code_arm_required = False
-    _attr_supported_features = SUPPORT_ALARM_ARM_HOME | SUPPORT_ALARM_ARM_AWAY
+    _attr_supported_features = (
+        AlarmControlPanelEntityFeature.ARM_HOME
+        | AlarmControlPanelEntityFeature.ARM_AWAY
+    )
     _device: AbodeAl
 
     @property

homeassistant/components/accuweather/translations/ca.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Ja configurat. Nom\u00e9s \u00e9s possible una sola configuraci\u00f3."
         },
+        "create_entry": {
+            "default": "Alguns sensors no estan activats de manera predeterminada. Els pots activar des del registre d'entitats, despr\u00e9s de la configuraci\u00f3 de la integraci\u00f3.\nLa previsi\u00f3 meteorol\u00f2gica no est\u00e0 activada de manera predeterminada. Pots activar-la a les opcions de la integraci\u00f3."
+        },
         "error": {
             "cannot_connect": "Ha fallat la connexi\u00f3",
             "invalid_api_key": "Clau API inv\u00e0lida",

homeassistant/components/accuweather/translations/de.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Bereits konfiguriert. Nur eine einzige Konfiguration m\u00f6glich."
         },
+        "create_entry": {
+            "default": "Einige Sensoren sind standardm\u00e4\u00dfig nicht aktiviert. Du kannst sie nach der Integrationskonfiguration in der Entit\u00e4tsregistrierung aktivieren.\nDie Wettervorhersage ist nicht standardm\u00e4\u00dfig aktiviert. Du kannst sie in den Integrationsoptionen aktivieren."
+        },
         "error": {
             "cannot_connect": "Verbindung fehlgeschlagen",
             "invalid_api_key": "Ung\u00fcltiger API-Schl\u00fcssel",

homeassistant/components/accuweather/translations/el.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "\u0388\u03c7\u03b5\u03b9 \u03ae\u03b4\u03b7 \u03c1\u03c5\u03b8\u03bc\u03b9\u03c3\u03c4\u03b5\u03af. \u039c\u03cc\u03bd\u03bf \u03bc\u03af\u03b1 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 \u03b5\u03af\u03bd\u03b1\u03b9 \u03b4\u03c5\u03bd\u03b1\u03c4\u03ae."
         },
+        "create_entry": {
+            "default": "\u039f\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03bf\u03b9 \u03b1\u03b9\u03c3\u03b8\u03b7\u03c4\u03ae\u03c1\u03b5\u03c2 \u03b4\u03b5\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03b7\u03bc\u03ad\u03bd\u03bf\u03b9 \u03b1\u03c0\u03cc \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae. \u039c\u03c0\u03bf\u03c1\u03b5\u03af\u03c4\u03b5 \u03bd\u03b1 \u03c4\u03b1 \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03b5\u03c4\u03b5 \u03c3\u03c4\u03bf \u03bc\u03b7\u03c4\u03c1\u03ce\u03bf \u03bf\u03bd\u03c4\u03bf\u03c4\u03ae\u03c4\u03c9\u03bd \u03bc\u03b5\u03c4\u03ac \u03c4\u03b7 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 \u03c4\u03b7\u03c2 \u03b5\u03bd\u03bf\u03c0\u03bf\u03af\u03b7\u03c3\u03b7\u03c2.\n \u0397 \u03c0\u03c1\u03cc\u03b3\u03bd\u03c9\u03c3\u03b7 \u03ba\u03b1\u03b9\u03c1\u03bf\u03cd \u03b4\u03b5\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03b7\u03bc\u03ad\u03bd\u03b7 \u03b1\u03c0\u03cc \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae. \u039c\u03c0\u03bf\u03c1\u03b5\u03af\u03c4\u03b5 \u03bd\u03b1 \u03c4\u03bf \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03b5\u03c4\u03b5 \u03c3\u03c4\u03b9\u03c2 \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ad\u03c2 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7\u03c2."
+        },
         "error": {
             "cannot_connect": "\u0391\u03c0\u03bf\u03c4\u03c5\u03c7\u03af\u03b1 \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7\u03c2",
             "invalid_api_key": "\u039c\u03b7 \u03ad\u03b3\u03ba\u03c5\u03c1\u03bf \u03ba\u03bb\u03b5\u03b9\u03b4\u03af API",

homeassistant/components/accuweather/translations/en.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Already configured. Only a single configuration possible."
         },
+        "create_entry": {
+            "default": "Some sensors are not enabled by default. You can enable them in the entity registry after the integration configuration.\nWeather forecast is not enabled by default. You can enable it in the integration options."
+        },
         "error": {
             "cannot_connect": "Failed to connect",
             "invalid_api_key": "Invalid API key",

homeassistant/components/accuweather/translations/et.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Sidumine juba tehtud. V\u00f5imalik on ainult 1 sidumine."
         },
+        "create_entry": {
+            "default": "M\u00f5ned andurid ei ole vaikimisi lubatud. Saad neid lubada \u00fcksuse registris p\u00e4rast sidumise seadistamist.\nIlmaprognoos ei ole vaikimisi lubatud. Saad selle lubada sidumise valikutes."
+        },
         "error": {
             "cannot_connect": "\u00dchendamine nurjus",
             "invalid_api_key": "API v\u00f5ti on vale",

homeassistant/components/accuweather/translations/fr.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
         },
+        "create_entry": {
+            "default": "Certains capteurs ne sont pas activ\u00e9s par d\u00e9faut. Vous pouvez les activer dans le registre des entit\u00e9s une fois la configuration de l'int\u00e9gration termin\u00e9e.\nLes pr\u00e9visions m\u00e9t\u00e9orologiques ne sont pas activ\u00e9es par d\u00e9faut. Vous pouvez les activer dans les options de l'int\u00e9gration."
+        },
         "error": {
             "cannot_connect": "\u00c9chec de connexion",
             "invalid_api_key": "Cl\u00e9 d'API non valide",
@@ -16,7 +19,7 @@
                     "longitude": "Longitude",
                     "name": "Nom"
                 },
-                "description": "Si vous avez besoin d'aide pour la configuration, consultez le site suivant : https://www.home-assistant.io/integrations/accuweather/\n\nCertains capteurs ne sont pas activ\u00e9s par d\u00e9faut. Vous pouvez les activer dans le registre des entit\u00e9s apr\u00e8s la configuration de l'int\u00e9gration.\nLes pr\u00e9visions m\u00e9t\u00e9orologiques ne sont pas activ\u00e9es par d\u00e9faut. Vous pouvez l'activer dans les options d'int\u00e9gration.",
+                "description": "Si vous avez besoin d'aide pour la configuration, consultez\u00a0: https://www.home-assistant.io/integrations/accuweather/\n\nCertains capteurs ne sont pas activ\u00e9s par d\u00e9faut. Vous pouvez les activer dans le registre des entit\u00e9s une fois la configuration de l'int\u00e9gration termin\u00e9e.\nLes pr\u00e9visions m\u00e9t\u00e9orologiques ne sont pas activ\u00e9es par d\u00e9faut. Vous pouvez les activer dans les options de l'int\u00e9gration.",
                 "title": "AccuWeather"
             }
         }

homeassistant/components/accuweather/translations/hu.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "M\u00e1r konfigur\u00e1lva van. Csak egy konfigur\u00e1ci\u00f3 lehets\u00e9ges."
         },
+        "create_entry": {
+            "default": "Egyes \u00e9rz\u00e9kel\u0151k alap\u00e9rtelmez\u00e9s szerint nincsenek enged\u00e9lyezve. Az integr\u00e1ci\u00f3s konfigur\u00e1ci\u00f3 ut\u00e1n enged\u00e9lyezheti \u0151ket az entit\u00e1s rendszerle\u00edr\u00f3 adatb\u00e1zis\u00e1ban.\nAz id\u0151j\u00e1r\u00e1s-el\u0151rejelz\u00e9s alap\u00e9rtelmez\u00e9s szerint nincs enged\u00e9lyezve. Ezt az integr\u00e1ci\u00f3s be\u00e1ll\u00edt\u00e1sokban enged\u00e9lyezheti."
+        },
         "error": {
             "cannot_connect": "Sikertelen csatlakoz\u00e1s",
             "invalid_api_key": "\u00c9rv\u00e9nytelen API kulcs",
@@ -14,7 +17,7 @@
                     "api_key": "API kulcs",
                     "latitude": "Sz\u00e9less\u00e9g",
                     "longitude": "Hossz\u00fas\u00e1g",
-                    "name": "N\u00e9v"
+                    "name": "Elnevez\u00e9s"
                 },
                 "description": "Ha seg\u00edts\u00e9gre van sz\u00fcks\u00e9ge a konfigur\u00e1l\u00e1shoz, n\u00e9zze meg itt: https://www.home-assistant.io/integrations/accuweather/ \n\nEgyes \u00e9rz\u00e9kel\u0151k alap\u00e9rtelmez\u00e9s szerint nincsenek enged\u00e9lyezve. Az integr\u00e1ci\u00f3s konfigur\u00e1ci\u00f3 ut\u00e1n enged\u00e9lyezheti \u0151ket az entit\u00e1s-nyilv\u00e1ntart\u00e1sban.\nAz id\u0151j\u00e1r\u00e1s-el\u0151rejelz\u00e9s alap\u00e9rtelmez\u00e9s szerint nincs enged\u00e9lyezve. Ezt az integr\u00e1ci\u00f3s be\u00e1ll\u00edt\u00e1sokban enged\u00e9lyezheti.",
                 "title": "AccuWeather"

homeassistant/components/accuweather/translations/id.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Sudah dikonfigurasi. Hanya satu konfigurasi yang diizinkan."
         },
+        "create_entry": {
+            "default": "Beberapa sensor tidak diaktifkan secara default. Anda dapat mengaktifkannya di registri entitas setelah konfigurasi integrasi.\nPrakiraan cuaca tidak diaktifkan secara default. Anda dapat mengaktifkannya di opsi integrasi."
+        },
         "error": {
             "cannot_connect": "Gagal terhubung",
             "invalid_api_key": "Kunci API tidak valid",

homeassistant/components/accuweather/translations/it.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Gi\u00e0 configurato. \u00c8 possibile una sola configurazione."
         },
+        "create_entry": {
+            "default": "Alcuni sensori non sono abilitati per impostazione predefinita. Puoi abilitarli nel registro delle entit\u00e0 dopo la configurazione dell'integrazione.\nLe previsioni del tempo non sono abilitate per impostazione predefinita. Puoi abilitarlo nelle opzioni di integrazione."
+        },
         "error": {
             "cannot_connect": "Impossibile connettersi",
             "invalid_api_key": "Chiave API non valida",

homeassistant/components/accuweather/translations/ja.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "\u3059\u3067\u306b\u8a2d\u5b9a\u3055\u308c\u3066\u3044\u307e\u3059\u3002\u5358\u4e00\u306e\u8a2d\u5b9a\u3057\u304b\u3067\u304d\u307e\u305b\u3093\u3002"
         },
+        "create_entry": {
+            "default": "\u4e00\u90e8\u306e\u30bb\u30f3\u30b5\u30fc\u306f\u3001\u30c7\u30d5\u30a9\u30eb\u30c8\u3067\u306f\u6709\u52b9\u306b\u306a\u3063\u3066\u3044\u307e\u305b\u3093\u3002\u30a4\u30f3\u30c6\u30b0\u30ec\u30fc\u30b7\u30e7\u30f3\u306e\u69cb\u6210\u5f8c\u3001\u30a8\u30f3\u30c6\u30a3\u30c6\u30a3\u30ec\u30b8\u30b9\u30c8\u30ea\u3067\u305d\u308c\u3089\u3092\u6709\u52b9\u306b\u3067\u304d\u307e\u3059\u3002\n\u5929\u6c17\u4e88\u5831\u306f\u30c7\u30d5\u30a9\u30eb\u30c8\u3067\u306f\u6709\u52b9\u306b\u306a\u3063\u3066\u3044\u307e\u305b\u3093\u3002\u30a4\u30f3\u30c6\u30b0\u30ec\u30fc\u30b7\u30e7\u30f3\u306e\u30aa\u30d7\u30b7\u30e7\u30f3\u3067\u6709\u52b9\u306b\u3067\u304d\u307e\u3059\u3002"
+        },
         "error": {
             "cannot_connect": "\u63a5\u7d9a\u306b\u5931\u6557\u3057\u307e\u3057\u305f",
             "invalid_api_key": "\u7121\u52b9\u306aAPI\u30ad\u30fc",

homeassistant/components/accuweather/translations/nl.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Al geconfigureerd. Slechts een enkele configuratie mogelijk."
         },
+        "create_entry": {
+            "default": "Sommige sensoren zijn standaard niet ingeschakeld. U kunt ze inschakelen in het entiteitenregister na de integratieconfiguratie.\nWeersvoorspelling is niet standaard ingeschakeld. U kunt deze inschakelen in de integratieopties."
+        },
         "error": {
             "cannot_connect": "Kan geen verbinding maken",
             "invalid_api_key": "API-sleutel",

homeassistant/components/accuweather/translations/no.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Allerede konfigurert. Bare \u00e9n enkelt konfigurasjon er mulig."
         },
+        "create_entry": {
+            "default": "Noen sensorer er ikke aktivert som standard. Du kan aktivere dem i enhetsregisteret etter integrasjonskonfigurasjonen.\n V\u00e6rmelding er ikke aktivert som standard. Du kan aktivere det i integreringsalternativene."
+        },
         "error": {
             "cannot_connect": "Tilkobling mislyktes",
             "invalid_api_key": "Ugyldig API-n\u00f8kkel",

homeassistant/components/accuweather/translations/pl.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Ju\u017c skonfigurowano. Mo\u017cliwa jest tylko jedna konfiguracja."
         },
+        "create_entry": {
+            "default": "Niekt\u00f3re sensory nie s\u0105 domy\u015blnie w\u0142\u0105czone. Mo\u017cesz je w\u0142\u0105czy\u0107 w rejestrze encji po skonfigurowaniu integracji.\nPrognoza pogody nie jest domy\u015blnie w\u0142\u0105czona. Mo\u017cesz to w\u0142\u0105czy\u0107 w opcjach integracji."
+        },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia",
             "invalid_api_key": "Nieprawid\u0142owy klucz API",

homeassistant/components/accuweather/translations/pt-BR.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "J\u00e1 configurado. Apenas uma configura\u00e7\u00e3o \u00e9 poss\u00edvel."
         },
+        "create_entry": {
+            "default": "Alguns sensores n\u00e3o s\u00e3o ativados por padr\u00e3o. Voc\u00ea pode habilit\u00e1-los no registro da entidade ap\u00f3s a configura\u00e7\u00e3o da integra\u00e7\u00e3o.\n A previs\u00e3o do tempo n\u00e3o est\u00e1 habilitada por padr\u00e3o. Voc\u00ea pode habilit\u00e1-lo nas op\u00e7\u00f5es de integra\u00e7\u00e3o."
+        },
         "error": {
             "cannot_connect": "Falha ao conectar",
             "invalid_api_key": "Chave de API inv\u00e1lida",

homeassistant/components/accuweather/translations/ru.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u0443\u0436\u0435 \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430. \u0412\u043e\u0437\u043c\u043e\u0436\u043d\u043e \u0434\u043e\u0431\u0430\u0432\u0438\u0442\u044c \u0442\u043e\u043b\u044c\u043a\u043e \u043e\u0434\u043d\u0443 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044e."
         },
+        "create_entry": {
+            "default": "\u041f\u043e \u0443\u043c\u043e\u043b\u0447\u0430\u043d\u0438\u044e \u043d\u0435\u043a\u043e\u0442\u043e\u0440\u044b\u0435 \u0441\u0435\u043d\u0441\u043e\u0440\u044b \u0441\u043a\u0440\u044b\u0442\u044b \u0438 \u043e\u0442\u043a\u043b\u044e\u0447\u0435\u043d \u043f\u0440\u043e\u0433\u043d\u043e\u0437 \u043f\u043e\u0433\u043e\u0434\u044b. \u0412\u044b \u043c\u043e\u0436\u0435\u0442\u0435 \u0430\u043a\u0442\u0438\u0432\u0438\u0440\u043e\u0432\u0430\u0442\u044c \u043e\u0442\u043e\u0431\u0440\u0430\u0436\u0435\u043d\u0438\u0435 \u043d\u0443\u0436\u043d\u044b\u0445 \u0441\u0435\u043d\u0441\u043e\u0440\u043e\u0432 \u0432 \u0440\u0435\u0435\u0441\u0442\u0440\u0435 \u043e\u0431\u044a\u0435\u043a\u0442\u043e\u0432 \u0438 \u0432\u043a\u043b\u044e\u0447\u0438\u0442\u044c \u043f\u0440\u043e\u0433\u043d\u043e\u0437 \u043f\u043e\u0433\u043e\u0434\u044b \u0432 \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430\u0445 \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u0438."
+        },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f.",
             "invalid_api_key": "\u041d\u0435\u0432\u0435\u0440\u043d\u044b\u0439 \u043a\u043b\u044e\u0447 API.",

homeassistant/components/accuweather/translations/tr.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "Zaten yap\u0131land\u0131r\u0131lm\u0131\u015f. Yaln\u0131zca tek bir konfig\u00fcrasyon m\u00fcmk\u00fcnd\u00fcr."
         },
+        "create_entry": {
+            "default": "Baz\u0131 sens\u00f6rler varsay\u0131lan olarak etkin de\u011fildir. Bunlar\u0131, entegrasyon yap\u0131land\u0131rmas\u0131ndan sonra varl\u0131k kay\u0131t defterinde etkinle\u015ftirebilirsiniz.\n Hava tahmini varsay\u0131lan olarak etkin de\u011fildir. Entegrasyon se\u00e7eneklerinde etkinle\u015ftirebilirsiniz."
+        },
         "error": {
             "cannot_connect": "Ba\u011flanma hatas\u0131",
             "invalid_api_key": "Ge\u00e7ersiz API anahtar\u0131",

homeassistant/components/accuweather/translations/zh-Hant.json

@@ -3,6 +3,9 @@
         "abort": {
             "single_instance_allowed": "\u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210\u3001\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u88dd\u7f6e\u3002"
         },
+        "create_entry": {
+            "default": "\u90e8\u5206\u611f\u6e2c\u5668\u9810\u8a2d\u70ba\u4e0d\u555f\u7528\u72c0\u614b\u3002\u53ef\u4ee5\u7a0d\u5f8c\u65bc\u6574\u5408\u8a2d\u5b9a\u9801\u9762\u4e2d\u7684\u5be6\u9ad4\u8a3b\u518a\u8868\u9032\u884c\u555f\u7528\u3002\n\u5929\u6c23\u9810\u5831\u9810\u8a2d\u70ba\u4e0d\u555f\u7528\u3001\u53ef\u4ee5\u65bc\u6574\u5408\u9078\u9805\u4e2d\u9032\u884c\u555f\u7528\u3002"
+        },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
             "invalid_api_key": "API \u91d1\u9470\u7121\u6548",

homeassistant/components/acmeda/cover.py

@@ -3,15 +3,8 @@ from __future__ import annotations
 
 from homeassistant.components.cover import (
     ATTR_POSITION,
-    SUPPORT_CLOSE,
-    SUPPORT_CLOSE_TILT,
-    SUPPORT_OPEN,
-    SUPPORT_OPEN_TILT,
-    SUPPORT_SET_POSITION,
-    SUPPORT_SET_TILT_POSITION,
-    SUPPORT_STOP,
-    SUPPORT_STOP_TILT,
     CoverEntity,
+    CoverEntityFeature,
 )
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant, callback
@@ -79,14 +72,17 @@ class AcmedaCover(AcmedaBase, CoverEntity):
         supported_features = 0
         if self.current_cover_position is not None:
             supported_features |= (
-                SUPPORT_OPEN | SUPPORT_CLOSE | SUPPORT_STOP | SUPPORT_SET_POSITION
+                CoverEntityFeature.OPEN
+                | CoverEntityFeature.CLOSE
+                | CoverEntityFeature.STOP
+                | CoverEntityFeature.SET_POSITION
             )
         if self.current_cover_tilt_position is not None:
             supported_features |= (
-                SUPPORT_OPEN_TILT
-                | SUPPORT_CLOSE_TILT
-                | SUPPORT_STOP_TILT
-                | SUPPORT_SET_TILT_POSITION
+                CoverEntityFeature.OPEN_TILT
+                | CoverEntityFeature.CLOSE_TILT
+                | CoverEntityFeature.STOP_TILT
+                | CoverEntityFeature.SET_TILT_POSITION
             )
 
         return supported_features

homeassistant/components/adax/climate.py

@@ -7,11 +7,7 @@ from adax import Adax
 from adax_local import Adax as AdaxLocal
 
 from homeassistant.components.climate import ClimateEntity
-from homeassistant.components.climate.const import (
-    HVAC_MODE_HEAT,
-    HVAC_MODE_OFF,
-    SUPPORT_TARGET_TEMPERATURE,
-)
+from homeassistant.components.climate.const import ClimateEntityFeature, HVACMode
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
     ATTR_TEMPERATURE,
@@ -65,10 +61,10 @@ async def async_setup_entry(
 class AdaxDevice(ClimateEntity):
     """Representation of a heater."""
 
-    _attr_hvac_modes = [HVAC_MODE_HEAT, HVAC_MODE_OFF]
+    _attr_hvac_modes = [HVACMode.HEAT, HVACMode.OFF]
     _attr_max_temp = 35
     _attr_min_temp = 5
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE
+    _attr_supported_features = ClimateEntityFeature.TARGET_TEMPERATURE
     _attr_target_temperature_step = PRECISION_WHOLE
     _attr_temperature_unit = TEMP_CELSIUS
 
@@ -86,12 +82,12 @@ class AdaxDevice(ClimateEntity):
 
     async def async_set_hvac_mode(self, hvac_mode: str) -> None:
         """Set hvac mode."""
-        if hvac_mode == HVAC_MODE_HEAT:
+        if hvac_mode == HVACMode.HEAT:
             temperature = max(self.min_temp, self.target_temperature or self.min_temp)
             await self._adax_data_handler.set_room_target_temperature(
                 self._device_id, temperature, True
             )
-        elif hvac_mode == HVAC_MODE_OFF:
+        elif hvac_mode == HVACMode.OFF:
             await self._adax_data_handler.set_room_target_temperature(
                 self._device_id, self.min_temp, False
             )
@@ -116,10 +112,10 @@ class AdaxDevice(ClimateEntity):
             self._attr_current_temperature = room.get("temperature")
             self._attr_target_temperature = room.get("targetTemperature")
             if room["heatingEnabled"]:
-                self._attr_hvac_mode = HVAC_MODE_HEAT
+                self._attr_hvac_mode = HVACMode.HEAT
                 self._attr_icon = "mdi:radiator"
             else:
-                self._attr_hvac_mode = HVAC_MODE_OFF
+                self._attr_hvac_mode = HVACMode.OFF
                 self._attr_icon = "mdi:radiator-off"
             return
 
@@ -127,11 +123,11 @@ class AdaxDevice(ClimateEntity):
 class LocalAdaxDevice(ClimateEntity):
     """Representation of a heater."""
 
-    _attr_hvac_modes = [HVAC_MODE_HEAT]
-    _attr_hvac_mode = HVAC_MODE_HEAT
+    _attr_hvac_modes = [HVACMode.HEAT]
+    _attr_hvac_mode = HVACMode.HEAT
     _attr_max_temp = 35
     _attr_min_temp = 5
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE
+    _attr_supported_features = ClimateEntityFeature.TARGET_TEMPERATURE
     _attr_target_temperature_step = PRECISION_WHOLE
     _attr_temperature_unit = TEMP_CELSIUS
 

homeassistant/components/adax/translations/hu.json

@@ -20,9 +20,9 @@
             "local": {
                 "data": {
                     "wifi_pswd": "WiFi jelsz\u00f3",
-                    "wifi_ssid": "WiFi ssid"
+                    "wifi_ssid": "Wi-Fi SSID"
                 },
-                "description": "\u00c1ll\u00edtsa vissza a f\u0171t\u0151berendez\u00e9st a + \u00e9s az OK gomb nyomvatart\u00e1s\u00e1val, m\u00edg a kijelz\u0151n a \"Reset\" (Vissza\u00e1ll\u00edt\u00e1s) felirat nem jelenik meg. Ezut\u00e1n nyomja meg \u00e9s tartsa lenyomva a f\u0171t\u0151berendez\u00e9s OK gombj\u00e1t, am\u00edg a k\u00e9k led villogni nem kezd, majd nyomja meg a K\u00fcld\u00e9s gombot. A f\u0171t\u0151berendez\u00e9s konfigur\u00e1l\u00e1sa n\u00e9h\u00e1ny percet vehet ig\u00e9nybe."
+                "description": "\u00c1ll\u00edtsa vissza a f\u0171t\u0151berendez\u00e9st a + \u00e9s az OK gomb nyomvatart\u00e1s\u00e1val, m\u00edg a kijelz\u0151n a \"Reset\" (Vissza\u00e1ll\u00edt\u00e1s) felirat nem jelenik meg. Ezut\u00e1n nyomja meg \u00e9s tartsa lenyomva a f\u0171t\u0151berendez\u00e9s OK gombj\u00e1t, am\u00edg a k\u00e9k led villogni nem kezd, l\u00e9pjen tov\u00e1bb. A f\u0171t\u0151berendez\u00e9s konfigur\u00e1l\u00e1sa n\u00e9h\u00e1ny percet vehet ig\u00e9nybe."
             },
             "user": {
                 "data": {

homeassistant/components/adax/translations/nl.json

@@ -31,7 +31,7 @@
                     "host": "Host",
                     "password": "Wachtwoord"
                 },
-                "description": "Selecteer verbindingstype. Lokaal vereist verwarming met bluetooth"
+                "description": "Selecteer verbindingstype. Lokaal vereist verwarming met Bluetooth."
             }
         }
     }

homeassistant/components/ads/cover.py

@@ -8,11 +8,8 @@ from homeassistant.components.cover import (
     ATTR_POSITION,
     DEVICE_CLASSES_SCHEMA,
     PLATFORM_SCHEMA,
-    SUPPORT_CLOSE,
-    SUPPORT_OPEN,
-    SUPPORT_SET_POSITION,
-    SUPPORT_STOP,
     CoverEntity,
+    CoverEntityFeature,
 )
 from homeassistant.const import CONF_DEVICE_CLASS, CONF_NAME
 from homeassistant.core import HomeAssistant
@@ -117,11 +114,13 @@ class AdsCover(AdsEntity, CoverEntity):
         self._ads_var_close = ads_var_close
         self._ads_var_stop = ads_var_stop
         self._attr_device_class = device_class
-        self._attr_supported_features = SUPPORT_OPEN | SUPPORT_CLOSE
+        self._attr_supported_features = (
+            CoverEntityFeature.OPEN | CoverEntityFeature.CLOSE
+        )
         if ads_var_stop is not None:
-            self._attr_supported_features |= SUPPORT_STOP
+            self._attr_supported_features |= CoverEntityFeature.STOP
         if ads_var_pos_set is not None:
-            self._attr_supported_features |= SUPPORT_SET_POSITION
+            self._attr_supported_features |= CoverEntityFeature.SET_POSITION
 
     async def async_added_to_hass(self):
         """Register device notification."""

homeassistant/components/ads/light.py

@@ -7,7 +7,7 @@ import voluptuous as vol
 from homeassistant.components.light import (
     ATTR_BRIGHTNESS,
     PLATFORM_SCHEMA,
-    SUPPORT_BRIGHTNESS,
+    ColorMode,
     LightEntity,
 )
 from homeassistant.const import CONF_NAME
@@ -60,7 +60,11 @@ class AdsLight(AdsEntity, LightEntity):
         self._state_dict[STATE_KEY_BRIGHTNESS] = None
         self._ads_var_brightness = ads_var_brightness
         if ads_var_brightness is not None:
-            self._attr_supported_features = SUPPORT_BRIGHTNESS
+            self._attr_color_mode = ColorMode.BRIGHTNESS
+            self._attr_supported_color_modes = {ColorMode.BRIGHTNESS}
+        else:
+            self._attr_color_mode = ColorMode.ONOFF
+            self._attr_supported_color_modes = {ColorMode.ONOFF}
 
     async def async_added_to_hass(self):
         """Register device notification."""

homeassistant/components/advantage_air/climate.py

@@ -9,15 +9,8 @@ from homeassistant.components.climate.const import (
     FAN_HIGH,
     FAN_LOW,
     FAN_MEDIUM,
-    HVAC_MODE_AUTO,
-    HVAC_MODE_COOL,
-    HVAC_MODE_DRY,
-    HVAC_MODE_FAN_ONLY,
-    HVAC_MODE_HEAT,
-    HVAC_MODE_HEAT_COOL,
-    HVAC_MODE_OFF,
-    SUPPORT_FAN_MODE,
-    SUPPORT_TARGET_TEMPERATURE,
+    ClimateEntityFeature,
+    HVACMode,
 )
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import ATTR_TEMPERATURE, PRECISION_WHOLE, TEMP_CELSIUS
@@ -35,20 +28,20 @@ from .const import (
 from .entity import AdvantageAirEntity
 
 ADVANTAGE_AIR_HVAC_MODES = {
-    "heat": HVAC_MODE_HEAT,
-    "cool": HVAC_MODE_COOL,
-    "vent": HVAC_MODE_FAN_ONLY,
-    "dry": HVAC_MODE_DRY,
-    "myauto": HVAC_MODE_AUTO,
+    "heat": HVACMode.HEAT,
+    "cool": HVACMode.COOL,
+    "vent": HVACMode.FAN_ONLY,
+    "dry": HVACMode.DRY,
+    "myauto": HVACMode.AUTO,
 }
 HASS_HVAC_MODES = {v: k for k, v in ADVANTAGE_AIR_HVAC_MODES.items()}
 
 AC_HVAC_MODES = [
-    HVAC_MODE_OFF,
-    HVAC_MODE_COOL,
-    HVAC_MODE_HEAT,
-    HVAC_MODE_FAN_ONLY,
-    HVAC_MODE_DRY,
+    HVACMode.OFF,
+    HVACMode.COOL,
+    HVACMode.HEAT,
+    HVACMode.FAN_ONLY,
+    HVACMode.DRY,
 ]
 
 ADVANTAGE_AIR_FAN_MODES = {
@@ -61,7 +54,7 @@ HASS_FAN_MODES = {v: k for k, v in ADVANTAGE_AIR_FAN_MODES.items()}
 FAN_SPEEDS = {FAN_LOW: 30, FAN_MEDIUM: 60, FAN_HIGH: 100}
 
 ADVANTAGE_AIR_SERVICE_SET_MYZONE = "set_myzone"
-ZONE_HVAC_MODES = [HVAC_MODE_OFF, HVAC_MODE_HEAT_COOL]
+ZONE_HVAC_MODES = [HVACMode.OFF, HVACMode.HEAT_COOL]
 
 PARALLEL_UPDATES = 0
 
@@ -108,7 +101,9 @@ class AdvantageAirAC(AdvantageAirClimateEntity):
 
     _attr_fan_modes = [FAN_AUTO, FAN_LOW, FAN_MEDIUM, FAN_HIGH]
     _attr_hvac_modes = AC_HVAC_MODES
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE | SUPPORT_FAN_MODE
+    _attr_supported_features = (
+        ClimateEntityFeature.TARGET_TEMPERATURE | ClimateEntityFeature.FAN_MODE
+    )
 
     def __init__(self, instance, ac_key):
         """Initialize an AdvantageAir AC unit."""
@@ -116,7 +111,7 @@ class AdvantageAirAC(AdvantageAirClimateEntity):
         self._attr_name = self._ac["name"]
         self._attr_unique_id = f'{self.coordinator.data["system"]["rid"]}-{ac_key}'
         if self._ac.get("myAutoModeEnabled"):
-            self._attr_hvac_modes = AC_HVAC_MODES + [HVAC_MODE_AUTO]
+            self._attr_hvac_modes = AC_HVAC_MODES + [HVACMode.AUTO]
 
     @property
     def target_temperature(self):
@@ -128,7 +123,7 @@ class AdvantageAirAC(AdvantageAirClimateEntity):
         """Return the current HVAC modes."""
         if self._ac["state"] == ADVANTAGE_AIR_STATE_ON:
             return ADVANTAGE_AIR_HVAC_MODES.get(self._ac["mode"])
-        return HVAC_MODE_OFF
+        return HVACMode.OFF
 
     @property
     def fan_mode(self):
@@ -137,7 +132,7 @@ class AdvantageAirAC(AdvantageAirClimateEntity):
 
     async def async_set_hvac_mode(self, hvac_mode):
         """Set the HVAC Mode and State."""
-        if hvac_mode == HVAC_MODE_OFF:
+        if hvac_mode == HVACMode.OFF:
             await self.async_change(
                 {self.ac_key: {"info": {"state": ADVANTAGE_AIR_STATE_OFF}}}
             )
@@ -169,7 +164,7 @@ class AdvantageAirZone(AdvantageAirClimateEntity):
     """AdvantageAir Zone control."""
 
     _attr_hvac_modes = ZONE_HVAC_MODES
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE
+    _attr_supported_features = ClimateEntityFeature.TARGET_TEMPERATURE
 
     def __init__(self, instance, ac_key, zone_key):
         """Initialize an AdvantageAir Zone control."""
@@ -183,8 +178,8 @@ class AdvantageAirZone(AdvantageAirClimateEntity):
     def hvac_mode(self):
         """Return the current state as HVAC mode."""
         if self._zone["state"] == ADVANTAGE_AIR_STATE_OPEN:
-            return HVAC_MODE_HEAT_COOL
-        return HVAC_MODE_OFF
+            return HVACMode.HEAT_COOL
+        return HVACMode.OFF
 
     @property
     def current_temperature(self):
@@ -198,7 +193,7 @@ class AdvantageAirZone(AdvantageAirClimateEntity):
 
     async def async_set_hvac_mode(self, hvac_mode):
         """Set the HVAC Mode and State."""
-        if hvac_mode == HVAC_MODE_OFF:
+        if hvac_mode == HVACMode.OFF:
             await self.async_change(
                 {
                     self.ac_key: {

homeassistant/components/advantage_air/cover.py

@@ -1,11 +1,9 @@
 """Cover platform for Advantage Air integration."""
 from homeassistant.components.cover import (
     ATTR_POSITION,
-    SUPPORT_CLOSE,
-    SUPPORT_OPEN,
-    SUPPORT_SET_POSITION,
     CoverDeviceClass,
     CoverEntity,
+    CoverEntityFeature,
 )
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
@@ -43,7 +41,11 @@ class AdvantageAirZoneVent(AdvantageAirEntity, CoverEntity):
     """Advantage Air Cover Class."""
 
     _attr_device_class = CoverDeviceClass.DAMPER
-    _attr_supported_features = SUPPORT_OPEN | SUPPORT_CLOSE | SUPPORT_SET_POSITION
+    _attr_supported_features = (
+        CoverEntityFeature.OPEN
+        | CoverEntityFeature.CLOSE
+        | CoverEntityFeature.SET_POSITION
+    )
 
     def __init__(self, instance, ac_key, zone_key):
         """Initialize an Advantage Air Cover Class."""

homeassistant/components/aemet/translations/ca.json

@@ -14,7 +14,7 @@
                     "longitude": "Longitud",
                     "name": "Nom de la integraci\u00f3"
                 },
-                "description": "Configura la integraci\u00f3 d'AEMET OpenData. Per generar la clau API, v\u00e9s a https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Per generar la clau API, v\u00e9s a https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/de.json

@@ -14,7 +14,7 @@
                     "longitude": "L\u00e4ngengrad",
                     "name": "Name der Integration"
                 },
-                "description": "Richte die AEMET OpenData Integration ein. Um den API-Schl\u00fcssel zu generieren, besuche https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Um den API-Schl\u00fcssel zu generieren, besuche https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/en.json

@@ -14,7 +14,7 @@
                     "longitude": "Longitude",
                     "name": "Name of the integration"
                 },
-                "description": "Set up AEMET OpenData integration. To generate API key go to https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "To generate API key go to https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/et.json

@@ -14,7 +14,7 @@
                     "longitude": "Pikkuskraad",
                     "name": "Sidumise nimi"
                 },
-                "description": "Seadista AEMET OpenData sidumine. API v\u00f5tme loomiseks mine aadressile https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "API-v\u00f5tme loomiseks mine aadressile https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/fr.json

@@ -14,7 +14,7 @@
                     "longitude": "Longitude",
                     "name": "Nom de l'int\u00e9gration"
                 },
-                "description": "Configurez l'int\u00e9gration AEMET OpenData. Pour g\u00e9n\u00e9rer la cl\u00e9 API, acc\u00e9dez \u00e0 https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Pour g\u00e9n\u00e9rer une cl\u00e9 d'API, rendez-vous sur https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/hu.json

@@ -14,7 +14,7 @@
                     "longitude": "Hossz\u00fas\u00e1g",
                     "name": "Az integr\u00e1ci\u00f3 neve"
                 },
-                "description": "\u00c1ll\u00edtsa be az AEMET OpenData integr\u00e1ci\u00f3t. Az API-kulcs el\u0151\u00e1ll\u00edt\u00e1s\u00e1hoz keresse fel a https://opendata.aemet.es/centrodedescargas/altaUsuario webhelyet.",
+                "description": "Az API-kulcs l\u00e9trehoz\u00e1s\u00e1hoz keresse fel a https://opendata.aemet.es/centrodedescargas/altaUsuario webhelyet",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/id.json

@@ -14,7 +14,7 @@
                     "longitude": "Bujur",
                     "name": "Nama integrasi"
                 },
-                "description": "Siapkan integrasi AEMET OpenData. Untuk menghasilkan kunci API, buka https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Untuk membuat kunci API, buka https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/it.json

@@ -14,7 +14,7 @@
                     "longitude": "Logitudine",
                     "name": "Nome dell'integrazione"
                 },
-                "description": "Imposta l'integrazione di AEMET OpenData. Per generare la chiave API, vai su https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Per generare la chiave API, vai su https://opendata.aemet.es/centrodescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/nl.json

@@ -14,7 +14,7 @@
                     "longitude": "Lengtegraad",
                     "name": "Naam van de integratie"
                 },
-                "description": "Stel AEMET OpenData-integratie in. Ga naar https://opendata.aemet.es/centrodedescargas/altaUsuario om een API-sleutel te genereren",
+                "description": "Om een API sleutel te genereren ga naar https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/no.json

@@ -14,7 +14,7 @@
                     "longitude": "Lengdegrad",
                     "name": "Navnet p\u00e5 integrasjonen"
                 },
-                "description": "Sett opp AEMET OpenData-integrasjon. For \u00e5 generere API-n\u00f8kkel, g\u00e5 til https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "For \u00e5 generere API-n\u00f8kkel, g\u00e5 til https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/pl.json

@@ -14,7 +14,7 @@
                     "longitude": "D\u0142ugo\u015b\u0107 geograficzna",
                     "name": "Nazwa integracji"
                 },
-                "description": "Skonfiguruj integracj\u0119 AEMET OpenData. Aby wygenerowa\u0107 klucz API, przejd\u017a do https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Aby wygenerowa\u0107 klucz API, przejd\u017a do https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/pt-BR.json

@@ -14,7 +14,7 @@
                     "longitude": "Longitude",
                     "name": "Nome da integra\u00e7\u00e3o"
                 },
-                "description": "Configure a integra\u00e7\u00e3o AEMET OpenData. Para gerar a chave API acesse https://opendata.aemet.es/centrodedescargas/altaUsuario",
+                "description": "Para gerar a chave API acesse https://opendata.aemet.es/centrodedescargas/altaUsuario",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/ru.json

@@ -14,7 +14,7 @@
                     "longitude": "\u0414\u043e\u043b\u0433\u043e\u0442\u0430",
                     "name": "\u041d\u0430\u0437\u0432\u0430\u043d\u0438\u0435"
                 },
-                "description": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 Home Assistant \u0434\u043b\u044f \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u0438 \u0441 AEMET OpenData. \u0427\u0442\u043e\u0431\u044b \u0441\u0433\u0435\u043d\u0435\u0440\u0438\u0440\u043e\u0432\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043d\u0430 https://opendata.aemet.es/centrodedescargas/altaUsuario.",
+                "description": "\u0427\u0442\u043e\u0431\u044b \u0441\u0433\u0435\u043d\u0435\u0440\u0438\u0440\u043e\u0432\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043f\u043e \u0441\u0441\u044b\u043b\u043a\u0435 https://opendata.aemet.es/centrodedescargas/altaUsuario.",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/tr.json

@@ -14,7 +14,7 @@
                     "longitude": "Boylam",
                     "name": "Entegrasyonun ad\u0131"
                 },
-                "description": "AEMET OpenData entegrasyonunu ayarlay\u0131n. API anahtar\u0131 olu\u015fturmak i\u00e7in https://opendata.aemet.es/centrodedescargas/altaUsuario adresine gidin.",
+                "description": "API anahtar\u0131 olu\u015fturmak i\u00e7in https://opendata.aemet.es/centrodedescargas/altaUsuario adresine gidin.",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/aemet/translations/zh-Hant.json

@@ -14,7 +14,7 @@
                     "longitude": "\u7d93\u5ea6",
                     "name": "\u6574\u5408\u540d\u7a31"
                 },
-                "description": "\u6b32\u8a2d\u5b9a AEMET OpenData \u6574\u5408\u3002\u8acb\u81f3 https://opendata.aemet.es/centrodedescargas/altaUsuario \u7522\u751f API \u91d1\u9470",
+                "description": "\u8acb\u81f3 https://opendata.aemet.es/centrodedescargas/altaUsuario \u4ee5\u7522\u751f API \u91d1\u9470",
                 "title": "AEMET OpenData"
             }
         }

homeassistant/components/agent_dvr/alarm_control_panel.py

@@ -1,9 +1,7 @@
 """Support for Agent DVR Alarm Control Panels."""
-from homeassistant.components.alarm_control_panel import AlarmControlPanelEntity
-from homeassistant.components.alarm_control_panel.const import (
-    SUPPORT_ALARM_ARM_AWAY,
-    SUPPORT_ALARM_ARM_HOME,
-    SUPPORT_ALARM_ARM_NIGHT,
+from homeassistant.components.alarm_control_panel import (
+    AlarmControlPanelEntity,
+    AlarmControlPanelEntityFeature,
 )
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY,
@@ -38,7 +36,9 @@ class AgentBaseStation(AlarmControlPanelEntity):
 
     _attr_icon = ICON
     _attr_supported_features = (
-        SUPPORT_ALARM_ARM_HOME | SUPPORT_ALARM_ARM_AWAY | SUPPORT_ALARM_ARM_NIGHT
+        AlarmControlPanelEntityFeature.ARM_HOME
+        | AlarmControlPanelEntityFeature.ARM_AWAY
+        | AlarmControlPanelEntityFeature.ARM_NIGHT
     )
 
     def __init__(self, client):

homeassistant/components/agent_dvr/camera.py

@@ -4,7 +4,7 @@ import logging
 
 from agent import AgentError
 
-from homeassistant.components.camera import SUPPORT_ON_OFF
+from homeassistant.components.camera import CameraEntityFeature
 from homeassistant.components.mjpeg import MjpegCamera, filter_urllib3_logging
 from homeassistant.const import ATTR_ATTRIBUTION
 from homeassistant.helpers import entity_platform
@@ -63,6 +63,8 @@ async def async_setup_entry(
 class AgentCamera(MjpegCamera):
     """Representation of an Agent Device Stream."""
 
+    _attr_supported_features = CameraEntityFeature.ON_OFF
+
     def __init__(self, device):
         """Initialize as a subclass of MjpegCamera."""
         self.device = device
@@ -134,11 +136,6 @@ class AgentCamera(MjpegCamera):
         """Return True if entity is connected."""
         return self.device.connected
 
-    @property
-    def supported_features(self) -> int:
-        """Return supported features."""
-        return SUPPORT_ON_OFF
-
     @property
     def is_on(self) -> bool:
         """Return true if on."""

homeassistant/components/agent_dvr/translations/hu.json

@@ -4,7 +4,7 @@
             "already_configured": "Az eszk\u00f6z m\u00e1r konfigur\u00e1lva van"
         },
         "error": {
-            "already_in_progress": "A konfigur\u00e1l\u00e1s m\u00e1r folyamatban van",
+            "already_in_progress": "A be\u00e1ll\u00edt\u00e1si folyamat m\u00e1r el lett kezdve",
             "cannot_connect": "Sikertelen csatlakoz\u00e1s"
         },
         "step": {

homeassistant/components/airly/diagnostics.py

@@ -0,0 +1,31 @@
+"""Diagnostics support for Airly."""
+from __future__ import annotations
+
+from homeassistant.components.diagnostics import async_redact_data
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import (
+    CONF_API_KEY,
+    CONF_LATITUDE,
+    CONF_LONGITUDE,
+    CONF_UNIQUE_ID,
+)
+from homeassistant.core import HomeAssistant
+
+from . import AirlyDataUpdateCoordinator
+from .const import DOMAIN
+
+TO_REDACT = {CONF_API_KEY, CONF_LATITUDE, CONF_LONGITUDE, CONF_UNIQUE_ID}
+
+
+async def async_get_config_entry_diagnostics(
+    hass: HomeAssistant, config_entry: ConfigEntry
+) -> dict:
+    """Return diagnostics for a config entry."""
+    coordinator: AirlyDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+
+    diagnostics_data = {
+        "config_entry": async_redact_data(config_entry.as_dict(), TO_REDACT),
+        "coordinator_data": coordinator.data,
+    }
+
+    return diagnostics_data

homeassistant/components/airly/translations/ca.json

@@ -15,7 +15,7 @@
                     "longitude": "Longitud",
                     "name": "Nom"
                 },
-                "description": "Configura la integraci\u00f3 de qualitat de l'aire Airly. Per generar la clau API, v\u00e9s a https://developer.airly.eu/register",
+                "description": "Per generar la clau API, v\u00e9s a https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/de.json

@@ -15,7 +15,7 @@
                     "longitude": "L\u00e4ngengrad",
                     "name": "Name"
                 },
-                "description": "Einrichtung der Airly-Luftqualit\u00e4t Integration. Um einen API-Schl\u00fcssel zu generieren, registriere dich auf https://developer.airly.eu/register",
+                "description": "Um einen API-Schl\u00fcssel zu generieren, besuche https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/en.json

@@ -15,7 +15,7 @@
                     "longitude": "Longitude",
                     "name": "Name"
                 },
-                "description": "Set up Airly air quality integration. To generate API key go to https://developer.airly.eu/register",
+                "description": "To generate API key go to https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/et.json

@@ -15,7 +15,7 @@
                     "longitude": "Pikkuskraad",
                     "name": "Nimi"
                 },
-                "description": "Seadista Airly \u00f5hukvaliteedi andmete sidumine. API v\u00f5tme loomiseks mine aadressile https://developer.airly.eu/register",
+                "description": "API-v\u00f5tme loomiseks mine aadressile https://developer.airly.eu/register",
                 "title": ""
             }
         }

homeassistant/components/airly/translations/fr.json

@@ -15,7 +15,7 @@
                     "longitude": "Longitude",
                     "name": "Nom"
                 },
-                "description": "Configurez l'int\u00e9gration de la qualit\u00e9 de l'air Airly. Pour g\u00e9n\u00e9rer une cl\u00e9 API, rendez-vous sur https://developer.airly.eu/register.",
+                "description": "Pour g\u00e9n\u00e9rer une cl\u00e9 d'API, rendez-vous sur https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/hu.json

@@ -13,9 +13,9 @@
                     "api_key": "API kulcs",
                     "latitude": "Sz\u00e9less\u00e9g",
                     "longitude": "Hossz\u00fas\u00e1g",
-                    "name": "N\u00e9v"
+                    "name": "Elnevez\u00e9s"
                 },
-                "description": "Az Airly leveg\u0151min\u0151s\u00e9gi integr\u00e1ci\u00f3j\u00e1nak be\u00e1ll\u00edt\u00e1sa. Api-kulcs l\u00e9trehoz\u00e1s\u00e1hoz nyissa meg a k\u00f6vetkez\u0151 weboldalt: https://developer.airly.eu/register",
+                "description": "Az API-kulcs l\u00e9trehoz\u00e1s\u00e1hoz keresse fel a https://developer.airly.eu/register webhelyet",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/id.json

@@ -15,7 +15,7 @@
                     "longitude": "Bujur",
                     "name": "Nama"
                 },
-                "description": "Siapkan integrasi kualitas udara Airly. Untuk membuat kunci API, buka https://developer.airly.eu/register",
+                "description": "Untuk membuat kunci API, buka https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/it.json

@@ -15,7 +15,7 @@
                     "longitude": "Logitudine",
                     "name": "Nome"
                 },
-                "description": "Configurazione dell'integrazione della qualit\u00e0 dell'aria Airly. Per generare la chiave API vai su https://developer.airly.eu/register",
+                "description": "Per generare la chiave API, vai su https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/nl.json

@@ -15,7 +15,7 @@
                     "longitude": "Lengtegraad",
                     "name": "Naam"
                 },
-                "description": "Airly-integratie van luchtkwaliteit instellen. Ga naar https://developer.airly.eu/register om de API-sleutel te genereren",
+                "description": "Om een API sleutel te genereren ga naar https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/no.json

@@ -15,7 +15,7 @@
                     "longitude": "Lengdegrad",
                     "name": "Navn"
                 },
-                "description": "Sett opp Airly luftkvalitet integrasjon. For \u00e5 opprette API-n\u00f8kkel, g\u00e5 til [https://developer.airly.eu/register](https://developer.airly.eu/register)",
+                "description": "For \u00e5 generere API-n\u00f8kkel, g\u00e5 til https://developer.airly.eu/register",
                 "title": ""
             }
         }

homeassistant/components/airly/translations/pl.json

@@ -15,7 +15,7 @@
                     "longitude": "D\u0142ugo\u015b\u0107 geograficzna",
                     "name": "Nazwa"
                 },
-                "description": "Konfiguracja integracji Airly. By wygenerowa\u0107 klucz API, przejd\u017a na stron\u0119 https://developer.airly.eu/register",
+                "description": "By wygenerowa\u0107 klucz API, przejd\u017a na stron\u0119 https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/pt-BR.json

@@ -15,7 +15,7 @@
                     "longitude": "Longitude",
                     "name": "Nome"
                 },
-                "description": "Configure a integra\u00e7\u00e3o da qualidade do ar airly. Para gerar a chave de API v\u00e1 para https://developer.airly.eu/register",
+                "description": "Para gerar a chave de API, acesse https://developer.airly.eu/register",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/ru.json

@@ -15,7 +15,7 @@
                     "longitude": "\u0414\u043e\u043b\u0433\u043e\u0442\u0430",
                     "name": "\u041d\u0430\u0437\u0432\u0430\u043d\u0438\u0435"
                 },
-                "description": "\u0418\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f \u0441\u0435\u0440\u0432\u0438\u0441\u0430 \u043f\u043e \u0430\u043d\u0430\u043b\u0438\u0437\u0443 \u043a\u0430\u0447\u0435\u0441\u0442\u0432\u0430 \u0432\u043e\u0437\u0434\u0443\u0445\u0430 Airly. \u0427\u0442\u043e\u0431\u044b \u0441\u043e\u0437\u0434\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043f\u043e \u0441\u0441\u044b\u043b\u043a\u0435 https://developer.airly.eu/register.",
+                "description": "\u0427\u0442\u043e\u0431\u044b \u0441\u043e\u0437\u0434\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043f\u043e \u0441\u0441\u044b\u043b\u043a\u0435 https://developer.airly.eu/register.",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/tr.json

@@ -15,7 +15,7 @@
                     "longitude": "Boylam",
                     "name": "Ad"
                 },
-                "description": "Airly hava kalitesi entegrasyonunu ayarlay\u0131n. API anahtar\u0131 olu\u015fturmak i\u00e7in https://developer.airly.eu/register adresine gidin.",
+                "description": "API anahtar\u0131 olu\u015fturmak i\u00e7in https://developer.airly.eu/register adresine gidin.",
                 "title": "Airly"
             }
         }

homeassistant/components/airly/translations/zh-Hant.json

@@ -15,7 +15,7 @@
                     "longitude": "\u7d93\u5ea6",
                     "name": "\u540d\u7a31"
                 },
-                "description": "\u6b32\u8a2d\u5b9a Airly \u7a7a\u6c23\u54c1\u8cea\u6574\u5408\u3002\u8acb\u81f3 https://developer.airly.eu/register \u7522\u751f API \u91d1\u9470",
+                "description": "\u8acb\u81f3 https://developer.airly.eu/register \u4ee5\u7522\u751f API \u91d1\u9470",
                 "title": "Airly"
             }
         }

homeassistant/components/airnow/translations/ca.json

@@ -17,7 +17,7 @@
                     "longitude": "Longitud",
                     "radius": "Radi de l'estaci\u00f3 (milles; opcional)"
                 },
-                "description": "Configura la integraci\u00f3 de qualitat d'aire AirNow. Per generar la clau API, v\u00e9s a https://docs.airnowapi.org/account/request/",
+                "description": "Per generar la clau API, v\u00e9s a https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/de.json

@@ -17,7 +17,7 @@
                     "longitude": "L\u00e4ngengrad",
                     "radius": "Stationsradius (Meilen; optional)"
                 },
-                "description": "Richte die AirNow-Luftqualit\u00e4tsintegration ein. Um den API-Schl\u00fcssel zu generieren, besuche https://docs.airnowapi.org/account/request/.",
+                "description": "Um den API-Schl\u00fcssel zu generieren, besuche https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/en.json

@@ -17,7 +17,7 @@
                     "longitude": "Longitude",
                     "radius": "Station Radius (miles; optional)"
                 },
-                "description": "Set up AirNow air quality integration. To generate API key go to https://docs.airnowapi.org/account/request/",
+                "description": "To generate API key go to https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/et.json

@@ -17,7 +17,7 @@
                     "longitude": "Pikkuskraad",
                     "radius": "Jaama raadius (miilid; valikuline)"
                 },
-                "description": "Seadista AirNow \u00f5hukvaliteedi sidumine. API-v\u00f5tme loomiseks mine aadressile https://docs.airnowapi.org/account/request/",
+                "description": "API-v\u00f5tme loomiseks mine aadressile https://docs.airnowapi.org/account/request/",
                 "title": ""
             }
         }

homeassistant/components/airnow/translations/fr.json

@@ -17,7 +17,7 @@
                     "longitude": "Longitude",
                     "radius": "Rayon d'action de la station (en miles, facultatif)"
                 },
-                "description": "Configurez l'int\u00e9gration de la qualit\u00e9 de l'air AirNow. Pour g\u00e9n\u00e9rer la cl\u00e9 API, acc\u00e9dez \u00e0 https://docs.airnowapi.org/account/request/",
+                "description": "Pour g\u00e9n\u00e9rer une cl\u00e9 d'API, rendez-vous sur https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/hu.json

@@ -17,7 +17,7 @@
                     "longitude": "Hossz\u00fas\u00e1g",
                     "radius": "\u00c1llom\u00e1s sugara (m\u00e9rf\u00f6ld; opcion\u00e1lis)"
                 },
-                "description": "\u00c1ll\u00edtsa be az AirNow leveg\u0151min\u0151s\u00e9gi integr\u00e1ci\u00f3t. Az API-kulcs el\u0151\u00e1ll\u00edt\u00e1s\u00e1hoz keresse fel a https://docs.airnowapi.org/account/request/ oldalt.",
+                "description": "Az API-kulcs l\u00e9trehoz\u00e1s\u00e1hoz keresse fel a https://docs.airnowapi.org/account/request/ webhelyet",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/id.json

@@ -17,7 +17,7 @@
                     "longitude": "Bujur",
                     "radius": "Radius Stasiun (mil; opsional)"
                 },
-                "description": "Siapkan integrasi kualitas udara AirNow. Untuk membuat kunci API buka https://docs.airnowapi.org/account/request/",
+                "description": "Untuk membuat kunci API buka https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/it.json

@@ -17,7 +17,7 @@
                     "longitude": "Logitudine",
                     "radius": "Raggio stazione (miglia; opzionale)"
                 },
-                "description": "Configura l'integrazione per la qualit\u00e0 dell'aria AirNow. Per generare la chiave API, vai su https://docs.airnowapi.org/account/request/",
+                "description": "Per generare la chiave API vai su https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/nl.json

@@ -17,7 +17,7 @@
                     "longitude": "Lengtegraad",
                     "radius": "Stationsradius (mijl; optioneel)"
                 },
-                "description": "AirNow luchtkwaliteit integratie opzetten. Om een API sleutel te genereren ga naar https://docs.airnowapi.org/account/request/",
+                "description": "Om een API sleutel te genereren ga naar https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/no.json

@@ -17,7 +17,7 @@
                     "longitude": "Lengdegrad",
                     "radius": "Stasjonsradius (miles; valgfritt)"
                 },
-                "description": "Konfigurer integrering av luftkvalitet i AirNow. For \u00e5 generere en API-n\u00f8kkel, g\u00e5r du til https://docs.airnowapi.org/account/request/",
+                "description": "For \u00e5 generere API-n\u00f8kkel, g\u00e5 til https://docs.airnowapi.org/account/request/",
                 "title": ""
             }
         }

homeassistant/components/airnow/translations/pl.json

@@ -17,7 +17,7 @@
                     "longitude": "D\u0142ugo\u015b\u0107 geograficzna",
                     "radius": "Promie\u0144 od stacji (w milach; opcjonalnie)"
                 },
-                "description": "Konfiguracja integracji jako\u015bci powietrza AirNow. Aby wygenerowa\u0107 klucz API, przejd\u017a do https://docs.airnowapi.org/account/request/",
+                "description": "Aby wygenerowa\u0107 klucz API, przejd\u017a do https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/pt-BR.json

@@ -17,7 +17,7 @@
                     "longitude": "Longitude",
                     "radius": "Raio da Esta\u00e7\u00e3o (milhas; opcional)"
                 },
-                "description": "Configure a integra\u00e7\u00e3o da qualidade do ar AirNow. Para gerar a chave de API, acesse https://docs.airnowapi.org/account/request/",
+                "description": "Para gerar a chave de API, acesse https://docs.airnowapi.org/account/request/",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/ru.json

@@ -17,7 +17,7 @@
                     "longitude": "\u0414\u043e\u043b\u0433\u043e\u0442\u0430",
                     "radius": "\u0420\u0430\u0434\u0438\u0443\u0441 \u0441\u0442\u0430\u043d\u0446\u0438\u0438 (\u0432 \u043c\u0438\u043b\u044f\u0445; \u043d\u0435\u043e\u0431\u044f\u0437\u0430\u0442\u0435\u043b\u044c\u043d\u043e)"
                 },
-                "description": "\u0418\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f \u0441\u0435\u0440\u0432\u0438\u0441\u0430 \u043f\u043e \u0430\u043d\u0430\u043b\u0438\u0437\u0443 \u043a\u0430\u0447\u0435\u0441\u0442\u0432\u0430 \u0432\u043e\u0437\u0434\u0443\u0445\u0430 AirNow. \u0427\u0442\u043e\u0431\u044b \u0441\u043e\u0437\u0434\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043f\u043e \u0441\u0441\u044b\u043b\u043a\u0435 https://docs.airnowapi.org/account/request/.",
+                "description": "\u0427\u0442\u043e\u0431\u044b \u0441\u043e\u0437\u0434\u0430\u0442\u044c \u043a\u043b\u044e\u0447 API, \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043f\u043e \u0441\u0441\u044b\u043b\u043a\u0435 https://docs.airnowapi.org/account/request/.",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/tr.json

@@ -17,7 +17,7 @@
                     "longitude": "Boylam",
                     "radius": "\u0130stasyon Yar\u0131\u00e7ap\u0131 (mil; iste\u011fe ba\u011fl\u0131)"
                 },
-                "description": "AirNow hava kalitesi entegrasyonunu ayarlay\u0131n. API anahtar\u0131 olu\u015fturmak i\u00e7in https://docs.airnowapi.org/account/request/ adresine gidin.",
+                "description": "API anahtar\u0131 olu\u015fturmak i\u00e7in https://docs.airnowapi.org/account/request/ adresine gidin.",
                 "title": "AirNow"
             }
         }

homeassistant/components/airnow/translations/zh-Hant.json

@@ -17,7 +17,7 @@
                     "longitude": "\u7d93\u5ea6",
                     "radius": "\u89c0\u6e2c\u7ad9\u534a\u5f91\uff08\u82f1\u91cc\uff1b\u9078\u9805\uff09"
                 },
-                "description": "\u6b32\u8a2d\u5b9a AirNow \u7a7a\u6c23\u54c1\u8cea\u6574\u5408\u3002\u8acb\u81f3 https://docs.airnowapi.org/account/request/ \u7522\u751f API \u91d1\u9470",
+                "description": "\u8acb\u81f3 https://docs.airnowapi.org/account/request/ \u4ee5\u7522\u751f API \u91d1\u9470",
                 "title": "AirNow"
             }
         }

homeassistant/components/airtouch4/climate.py

@@ -11,14 +11,8 @@ from homeassistant.components.climate.const import (
     FAN_HIGH,
     FAN_LOW,
     FAN_MEDIUM,
-    HVAC_MODE_AUTO,
-    HVAC_MODE_COOL,
-    HVAC_MODE_DRY,
-    HVAC_MODE_FAN_ONLY,
-    HVAC_MODE_HEAT,
-    HVAC_MODE_OFF,
-    SUPPORT_FAN_MODE,
-    SUPPORT_TARGET_TEMPERATURE,
+    ClimateEntityFeature,
+    HVACMode,
 )
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import ATTR_TEMPERATURE, TEMP_CELSIUS
@@ -29,24 +23,23 @@ from homeassistant.helpers.update_coordinator import CoordinatorEntity
 
 from .const import DOMAIN
 
-SUPPORT_FLAGS = SUPPORT_TARGET_TEMPERATURE | SUPPORT_FAN_MODE
 AT_TO_HA_STATE = {
-    "Heat": HVAC_MODE_HEAT,
-    "Cool": HVAC_MODE_COOL,
-    "AutoHeat": HVAC_MODE_AUTO,  # airtouch reports either autoheat or autocool
-    "AutoCool": HVAC_MODE_AUTO,
-    "Auto": HVAC_MODE_AUTO,
-    "Dry": HVAC_MODE_DRY,
-    "Fan": HVAC_MODE_FAN_ONLY,
+    "Heat": HVACMode.HEAT,
+    "Cool": HVACMode.COOL,
+    "AutoHeat": HVACMode.AUTO,  # airtouch reports either autoheat or autocool
+    "AutoCool": HVACMode.AUTO,
+    "Auto": HVACMode.AUTO,
+    "Dry": HVACMode.DRY,
+    "Fan": HVACMode.FAN_ONLY,
 }
 
 HA_STATE_TO_AT = {
-    HVAC_MODE_HEAT: "Heat",
-    HVAC_MODE_COOL: "Cool",
-    HVAC_MODE_AUTO: "Auto",
-    HVAC_MODE_DRY: "Dry",
-    HVAC_MODE_FAN_ONLY: "Fan",
-    HVAC_MODE_OFF: "Off",
+    HVACMode.HEAT: "Heat",
+    HVACMode.COOL: "Cool",
+    HVACMode.AUTO: "Auto",
+    HVACMode.DRY: "Dry",
+    HVACMode.FAN_ONLY: "Fan",
+    HVACMode.OFF: "Off",
 }
 
 AT_TO_HA_FAN_SPEED = {
@@ -59,7 +52,7 @@ AT_TO_HA_FAN_SPEED = {
     "Turbo": "turbo",
 }
 
-AT_GROUP_MODES = [HVAC_MODE_OFF, HVAC_MODE_FAN_ONLY]
+AT_GROUP_MODES = [HVACMode.OFF, HVACMode.FAN_ONLY]
 
 HA_FAN_SPEED_TO_AT = {value: key for key, value in AT_TO_HA_FAN_SPEED.items()}
 
@@ -90,7 +83,9 @@ async def async_setup_entry(
 class AirtouchAC(CoordinatorEntity, ClimateEntity):
     """Representation of an AirTouch 4 ac."""
 
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE | SUPPORT_FAN_MODE
+    _attr_supported_features = (
+        ClimateEntityFeature.TARGET_TEMPERATURE | ClimateEntityFeature.FAN_MODE
+    )
     _attr_temperature_unit = TEMP_CELSIUS
 
     def __init__(self, coordinator, ac_number, info):
@@ -147,7 +142,7 @@ class AirtouchAC(CoordinatorEntity, ClimateEntity):
         """Return hvac target hvac state."""
         is_off = self._unit.PowerState == "Off"
         if is_off:
-            return HVAC_MODE_OFF
+            return HVACMode.OFF
 
         return AT_TO_HA_STATE[self._airtouch.acs[self._ac_number].AcMode]
 
@@ -156,7 +151,7 @@ class AirtouchAC(CoordinatorEntity, ClimateEntity):
         """Return the list of available operation modes."""
         airtouch_modes = self._airtouch.GetSupportedCoolingModesForAc(self._ac_number)
         modes = [AT_TO_HA_STATE[mode] for mode in airtouch_modes]
-        modes.append(HVAC_MODE_OFF)
+        modes.append(HVACMode.OFF)
         return modes
 
     async def async_set_hvac_mode(self, hvac_mode):
@@ -164,7 +159,7 @@ class AirtouchAC(CoordinatorEntity, ClimateEntity):
         if hvac_mode not in HA_STATE_TO_AT:
             raise ValueError(f"Unsupported HVAC mode: {hvac_mode}")
 
-        if hvac_mode == HVAC_MODE_OFF:
+        if hvac_mode == HVACMode.OFF:
             return await self.async_turn_off()
         await self._airtouch.SetCoolingModeForAc(
             self._ac_number, HA_STATE_TO_AT[hvac_mode]
@@ -204,7 +199,7 @@ class AirtouchAC(CoordinatorEntity, ClimateEntity):
 class AirtouchGroup(CoordinatorEntity, ClimateEntity):
     """Representation of an AirTouch 4 group."""
 
-    _attr_supported_features = SUPPORT_TARGET_TEMPERATURE
+    _attr_supported_features = ClimateEntityFeature.TARGET_TEMPERATURE
     _attr_temperature_unit = TEMP_CELSIUS
     _attr_hvac_modes = AT_GROUP_MODES
 
@@ -267,18 +262,18 @@ class AirtouchGroup(CoordinatorEntity, ClimateEntity):
         # there are other power states that aren't 'on' but still count as on (eg. 'Turbo')
         is_off = self._unit.PowerState == "Off"
         if is_off:
-            return HVAC_MODE_OFF
+            return HVACMode.OFF
 
-        return HVAC_MODE_FAN_ONLY
+        return HVACMode.FAN_ONLY
 
     async def async_set_hvac_mode(self, hvac_mode):
         """Set new operation mode."""
         if hvac_mode not in HA_STATE_TO_AT:
             raise ValueError(f"Unsupported HVAC mode: {hvac_mode}")
 
-        if hvac_mode == HVAC_MODE_OFF:
+        if hvac_mode == HVACMode.OFF:
             return await self.async_turn_off()
-        if self.hvac_mode == HVAC_MODE_OFF:
+        if self.hvac_mode == HVACMode.OFF:
             await self.async_turn_on()
         self._unit = self._airtouch.GetGroups()[self._group_number]
         _LOGGER.debug(

homeassistant/components/airvisual/translations/sensor.fr.json

@@ -10,7 +10,7 @@
         },
         "airvisual__pollutant_level": {
             "good": "Bon",
-            "hazardous": "Hasardeux",
+            "hazardous": "Dangereux",
             "moderate": "Mod\u00e9r\u00e9",
             "unhealthy": "Malsain",
             "unhealthy_sensitive": "Malsain pour les groupes sensibles",

homeassistant/components/airzone/__init__.py

@@ -1,23 +1,30 @@
 """The Airzone integration."""
 from __future__ import annotations
 
+import logging
 from typing import Any
 
-from aioairzone.common import ConnectionOptions
 from aioairzone.const import (
     AZD_ID,
+    AZD_MAC,
     AZD_NAME,
     AZD_SYSTEM,
     AZD_THERMOSTAT_FW,
     AZD_THERMOSTAT_MODEL,
+    AZD_WEBSERVER,
     AZD_ZONES,
+    DEFAULT_SYSTEM_ID,
 )
-from aioairzone.localapi import AirzoneLocalApi
+from aioairzone.localapi import AirzoneLocalApi, ConnectionOptions
 
 from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import CONF_HOST, CONF_PORT, Platform
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers import aiohttp_client
+from homeassistant.const import CONF_HOST, CONF_ID, CONF_PORT, Platform
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers import (
+    aiohttp_client,
+    device_registry as dr,
+    entity_registry as er,
+)
 from homeassistant.helpers.entity import DeviceInfo
 from homeassistant.helpers.update_coordinator import CoordinatorEntity
 
@@ -26,10 +33,20 @@ from .coordinator import AirzoneUpdateCoordinator
 
 PLATFORMS: list[Platform] = [Platform.BINARY_SENSOR, Platform.CLIMATE, Platform.SENSOR]
 
+_LOGGER = logging.getLogger(__name__)
+
 
 class AirzoneEntity(CoordinatorEntity[AirzoneUpdateCoordinator]):
     """Define an Airzone entity."""
 
+    def get_airzone_value(self, key) -> Any:
+        """Return Airzone entity value by key."""
+        raise NotImplementedError()
+
+
+class AirzoneZoneEntity(AirzoneEntity):
+    """Define an Airzone Zone entity."""
+
     def __init__(
         self,
         coordinator: AirzoneUpdateCoordinator,
@@ -47,12 +64,15 @@ class AirzoneEntity(CoordinatorEntity[AirzoneUpdateCoordinator]):
         self._attr_device_info: DeviceInfo = {
             "identifiers": {(DOMAIN, f"{entry.entry_id}_{system_zone_id}")},
             "manufacturer": MANUFACTURER,
-            "model": self.get_zone_value(AZD_THERMOSTAT_MODEL),
+            "model": self.get_airzone_value(AZD_THERMOSTAT_MODEL),
             "name": f"Airzone [{system_zone_id}] {zone_data[AZD_NAME]}",
-            "sw_version": self.get_zone_value(AZD_THERMOSTAT_FW),
+            "sw_version": self.get_airzone_value(AZD_THERMOSTAT_FW),
         }
+        self._attr_unique_id = (
+            entry.entry_id if entry.unique_id is None else entry.unique_id
+        )
 
-    def get_zone_value(self, key):
+    def get_airzone_value(self, key) -> Any:
         """Return zone value by key."""
         value = None
         if self.system_zone_id in self.coordinator.data[AZD_ZONES]:
@@ -62,17 +82,58 @@ class AirzoneEntity(CoordinatorEntity[AirzoneUpdateCoordinator]):
         return value
 
 
+async def _async_migrate_unique_ids(
+    hass: HomeAssistant,
+    entry: ConfigEntry,
+    coordinator: AirzoneUpdateCoordinator,
+) -> None:
+    """Migrate entities when the mac address gets discovered."""
+
+    @callback
+    def _async_migrator(entity_entry: er.RegistryEntry) -> dict[str, Any] | None:
+        updates = None
+
+        unique_id = entry.unique_id
+        entry_id = entry.entry_id
+        entity_unique_id = entity_entry.unique_id
+
+        if entity_unique_id.startswith(entry_id):
+            new_unique_id = f"{unique_id}{entity_unique_id[len(entry_id):]}"
+            _LOGGER.info(
+                "Migrating unique_id from [%s] to [%s]",
+                entity_unique_id,
+                new_unique_id,
+            )
+            updates = {"new_unique_id": new_unique_id}
+
+        return updates
+
+    if (
+        entry.unique_id is None
+        and AZD_WEBSERVER in coordinator.data
+        and AZD_MAC in coordinator.data[AZD_WEBSERVER]
+        and (mac := coordinator.data[AZD_WEBSERVER][AZD_MAC]) is not None
+    ):
+        updates: dict[str, Any] = {
+            "unique_id": dr.format_mac(mac),
+        }
+        hass.config_entries.async_update_entry(entry, **updates)
+
+        await er.async_migrate_entries(hass, entry.entry_id, _async_migrator)
+
+
 async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     """Set up Airzone from a config entry."""
     options = ConnectionOptions(
         entry.data[CONF_HOST],
         entry.data[CONF_PORT],
+        entry.data.get(CONF_ID, DEFAULT_SYSTEM_ID),
     )
 
     airzone = AirzoneLocalApi(aiohttp_client.async_get_clientsession(hass), options)
-
     coordinator = AirzoneUpdateCoordinator(hass, airzone)
     await coordinator.async_config_entry_first_refresh()
+    await _async_migrate_unique_ids(hass, entry, coordinator)
 
     hass.data.setdefault(DOMAIN, {})[entry.entry_id] = coordinator
 

homeassistant/components/airzone/binary_sensor.py

@@ -7,6 +7,7 @@ from typing import Any, Final
 
 from aioairzone.const import (
     AZD_AIR_DEMAND,
+    AZD_BATTERY_LOW,
     AZD_ERRORS,
     AZD_FLOOR_DEMAND,
     AZD_NAME,
@@ -15,8 +16,7 @@ from aioairzone.const import (
 )
 
 from homeassistant.components.binary_sensor import (
-    DEVICE_CLASS_PROBLEM,
-    DEVICE_CLASS_RUNNING,
+    BinarySensorDeviceClass,
     BinarySensorEntity,
     BinarySensorEntityDescription,
 )
@@ -25,7 +25,7 @@ from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity import EntityCategory
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
 
-from . import AirzoneEntity
+from . import AirzoneEntity, AirzoneZoneEntity
 from .const import DOMAIN
 from .coordinator import AirzoneUpdateCoordinator
 
@@ -37,14 +37,19 @@ class AirzoneBinarySensorEntityDescription(BinarySensorEntityDescription):
     attributes: dict[str, str] | None = None
 
 
-BINARY_SENSOR_TYPES: Final[tuple[AirzoneBinarySensorEntityDescription, ...]] = (
+ZONE_BINARY_SENSOR_TYPES: Final[tuple[AirzoneBinarySensorEntityDescription, ...]] = (
     AirzoneBinarySensorEntityDescription(
-        device_class=DEVICE_CLASS_RUNNING,
+        device_class=BinarySensorDeviceClass.RUNNING,
         key=AZD_AIR_DEMAND,
         name="Air Demand",
     ),
     AirzoneBinarySensorEntityDescription(
-        device_class=DEVICE_CLASS_RUNNING,
+        device_class=BinarySensorDeviceClass.BATTERY,
+        key=AZD_BATTERY_LOW,
+        name="Battery Low",
+    ),
+    AirzoneBinarySensorEntityDescription(
+        device_class=BinarySensorDeviceClass.RUNNING,
         key=AZD_FLOOR_DEMAND,
         name="Floor Demand",
     ),
@@ -52,7 +57,7 @@ BINARY_SENSOR_TYPES: Final[tuple[AirzoneBinarySensorEntityDescription, ...]] = (
         attributes={
             "errors": AZD_ERRORS,
         },
-        device_class=DEVICE_CLASS_PROBLEM,
+        device_class=BinarySensorDeviceClass.PROBLEM,
         entity_category=EntityCategory.DIAGNOSTIC,
         key=AZD_PROBLEMS,
         name="Problem",
@@ -66,12 +71,12 @@ async def async_setup_entry(
     """Add Airzone binary sensors from a config_entry."""
     coordinator = hass.data[DOMAIN][entry.entry_id]
 
-    binary_sensors = []
+    binary_sensors: list[AirzoneBinarySensor] = []
     for system_zone_id, zone_data in coordinator.data[AZD_ZONES].items():
-        for description in BINARY_SENSOR_TYPES:
+        for description in ZONE_BINARY_SENSOR_TYPES:
             if description.key in zone_data:
                 binary_sensors.append(
-                    AirzoneBinarySensor(
+                    AirzoneZoneBinarySensor(
                         coordinator,
                         description,
                         entry,
@@ -84,7 +89,28 @@ async def async_setup_entry(
 
 
 class AirzoneBinarySensor(AirzoneEntity, BinarySensorEntity):
-    """Define an Airzone sensor."""
+    """Define an Airzone binary sensor."""
+
+    entity_description: AirzoneBinarySensorEntityDescription
+
+    @property
+    def extra_state_attributes(self) -> Mapping[str, Any] | None:
+        """Return state attributes."""
+        if not self.entity_description.attributes:
+            return None
+        return {
+            key: self.get_airzone_value(val)
+            for key, val in self.entity_description.attributes.items()
+        }
+
+    @property
+    def is_on(self) -> bool | None:
+        """Return true if the binary sensor is on."""
+        return self.get_airzone_value(self.entity_description.key)
+
+
+class AirzoneZoneBinarySensor(AirzoneZoneEntity, AirzoneBinarySensor):
+    """Define an Airzone Zone binary sensor."""
 
     def __init__(
         self,
@@ -96,19 +122,9 @@ class AirzoneBinarySensor(AirzoneEntity, BinarySensorEntity):
     ) -> None:
         """Initialize."""
         super().__init__(coordinator, entry, system_zone_id, zone_data)
+
         self._attr_name = f"{zone_data[AZD_NAME]} {description.name}"
-        self._attr_unique_id = f"{entry.entry_id}_{system_zone_id}_{description.key}"
-        self.attributes = description.attributes
+        self._attr_unique_id = (
+            f"{self._attr_unique_id}_{system_zone_id}_{description.key}"
+        )
         self.entity_description = description
-
-    @property
-    def extra_state_attributes(self) -> Mapping[str, Any] | None:
-        """Return state attributes."""
-        if not self.attributes:
-            return None
-        return {key: self.get_zone_value(val) for key, val in self.attributes.items()}
-
-    @property
-    def is_on(self) -> bool | None:
-        """Return true if the binary sensor is on."""
-        return self.get_zone_value(self.entity_description.key)

homeassistant/components/airzone/climate.py

@@ -2,7 +2,7 @@
 from __future__ import annotations
 
 import logging
-from typing import Final
+from typing import Any, Final
 
 from aioairzone.common import OperationMode
 from aioairzone.const import (
@@ -26,23 +26,12 @@ from aioairzone.const import (
     AZD_ZONES,
 )
 from aioairzone.exceptions import AirzoneError
-from aiohttp.client_exceptions import ClientConnectorError
 
 from homeassistant.components.climate import ClimateEntity
 from homeassistant.components.climate.const import (
-    CURRENT_HVAC_COOL,
-    CURRENT_HVAC_DRY,
-    CURRENT_HVAC_FAN,
-    CURRENT_HVAC_HEAT,
-    CURRENT_HVAC_IDLE,
-    CURRENT_HVAC_OFF,
-    HVAC_MODE_COOL,
-    HVAC_MODE_DRY,
-    HVAC_MODE_FAN_ONLY,
-    HVAC_MODE_HEAT,
-    HVAC_MODE_HEAT_COOL,
-    HVAC_MODE_OFF,
-    SUPPORT_TARGET_TEMPERATURE,
+    ClimateEntityFeature,
+    HVACAction,
+    HVACMode,
 )
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import ATTR_TEMPERATURE
@@ -50,35 +39,35 @@ from homeassistant.core import HomeAssistant, callback
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
 
-from . import AirzoneEntity
+from . import AirzoneZoneEntity
 from .const import API_TEMPERATURE_STEP, DOMAIN, TEMP_UNIT_LIB_TO_HASS
 from .coordinator import AirzoneUpdateCoordinator
 
 _LOGGER = logging.getLogger(__name__)
 
 
-HVAC_ACTION_LIB_TO_HASS: Final[dict[OperationMode, str]] = {
-    OperationMode.STOP: CURRENT_HVAC_OFF,
-    OperationMode.COOLING: CURRENT_HVAC_COOL,
-    OperationMode.HEATING: CURRENT_HVAC_HEAT,
-    OperationMode.FAN: CURRENT_HVAC_FAN,
-    OperationMode.DRY: CURRENT_HVAC_DRY,
+HVAC_ACTION_LIB_TO_HASS: Final[dict[OperationMode, HVACAction]] = {
+    OperationMode.STOP: HVACAction.OFF,
+    OperationMode.COOLING: HVACAction.COOLING,
+    OperationMode.HEATING: HVACAction.HEATING,
+    OperationMode.FAN: HVACAction.FAN,
+    OperationMode.DRY: HVACAction.DRYING,
 }
-HVAC_MODE_LIB_TO_HASS: Final[dict[OperationMode, str]] = {
-    OperationMode.STOP: HVAC_MODE_OFF,
-    OperationMode.COOLING: HVAC_MODE_COOL,
-    OperationMode.HEATING: HVAC_MODE_HEAT,
-    OperationMode.FAN: HVAC_MODE_FAN_ONLY,
-    OperationMode.DRY: HVAC_MODE_DRY,
-    OperationMode.AUTO: HVAC_MODE_HEAT_COOL,
+HVAC_MODE_LIB_TO_HASS: Final[dict[OperationMode, HVACMode]] = {
+    OperationMode.STOP: HVACMode.OFF,
+    OperationMode.COOLING: HVACMode.COOL,
+    OperationMode.HEATING: HVACMode.HEAT,
+    OperationMode.FAN: HVACMode.FAN_ONLY,
+    OperationMode.DRY: HVACMode.DRY,
+    OperationMode.AUTO: HVACMode.HEAT_COOL,
 }
-HVAC_MODE_HASS_TO_LIB: Final[dict[str, OperationMode]] = {
-    HVAC_MODE_OFF: OperationMode.STOP,
-    HVAC_MODE_COOL: OperationMode.COOLING,
-    HVAC_MODE_HEAT: OperationMode.HEATING,
-    HVAC_MODE_FAN_ONLY: OperationMode.FAN,
-    HVAC_MODE_DRY: OperationMode.DRY,
-    HVAC_MODE_HEAT_COOL: OperationMode.AUTO,
+HVAC_MODE_HASS_TO_LIB: Final[dict[HVACMode, OperationMode]] = {
+    HVACMode.OFF: OperationMode.STOP,
+    HVACMode.COOL: OperationMode.COOLING,
+    HVACMode.HEAT: OperationMode.HEATING,
+    HVACMode.FAN_ONLY: OperationMode.FAN,
+    HVACMode.DRY: OperationMode.DRY,
+    HVACMode.HEAT_COOL: OperationMode.AUTO,
 }
 
 
@@ -98,7 +87,7 @@ async def async_setup_entry(
     )
 
 
-class AirzoneClimate(AirzoneEntity, ClimateEntity):
+class AirzoneClimate(AirzoneZoneEntity, ClimateEntity):
     """Define an Airzone sensor."""
 
     def __init__(
@@ -110,61 +99,74 @@ class AirzoneClimate(AirzoneEntity, ClimateEntity):
     ) -> None:
         """Initialize Airzone climate entity."""
         super().__init__(coordinator, entry, system_zone_id, zone_data)
+
         self._attr_name = f"{zone_data[AZD_NAME]}"
-        self._attr_unique_id = f"{entry.entry_id}_{system_zone_id}"
-        self._attr_supported_features = SUPPORT_TARGET_TEMPERATURE
+        self._attr_unique_id = f"{self._attr_unique_id}_{system_zone_id}"
+        self._attr_supported_features = ClimateEntityFeature.TARGET_TEMPERATURE
         self._attr_target_temperature_step = API_TEMPERATURE_STEP
-        self._attr_max_temp = self.get_zone_value(AZD_TEMP_MAX)
-        self._attr_min_temp = self.get_zone_value(AZD_TEMP_MIN)
+        self._attr_max_temp = self.get_airzone_value(AZD_TEMP_MAX)
+        self._attr_min_temp = self.get_airzone_value(AZD_TEMP_MIN)
         self._attr_temperature_unit = TEMP_UNIT_LIB_TO_HASS[
-            self.get_zone_value(AZD_TEMP_UNIT)
+            self.get_airzone_value(AZD_TEMP_UNIT)
         ]
         self._attr_hvac_modes = [
-            HVAC_MODE_LIB_TO_HASS[mode] for mode in self.get_zone_value(AZD_MODES)
+            HVAC_MODE_LIB_TO_HASS[mode] for mode in self.get_airzone_value(AZD_MODES)
         ]
         self._async_update_attrs()
 
-    async def _async_update_hvac_params(self, params) -> None:
+    async def _async_update_hvac_params(self, params: dict[str, Any]) -> None:
         """Send HVAC parameters to API."""
+        _params = {
+            API_SYSTEM_ID: self.system_id,
+            API_ZONE_ID: self.zone_id,
+            **params,
+        }
+        _LOGGER.debug("update_hvac_params=%s", _params)
         try:
-            await self.coordinator.airzone.put_hvac(params)
-        except (AirzoneError, ClientConnectorError) as error:
+            await self.coordinator.airzone.set_hvac_parameters(_params)
+        except AirzoneError as error:
             raise HomeAssistantError(
                 f"Failed to set zone {self.name}: {error}"
             ) from error
         else:
             self.coordinator.async_set_updated_data(self.coordinator.airzone.data())
 
-    async def async_set_hvac_mode(self, hvac_mode: str) -> None:
-        """Set hvac mode."""
+    async def async_turn_on(self) -> None:
+        """Turn the entity on."""
         params = {
-            API_SYSTEM_ID: self.system_id,
-            API_ZONE_ID: self.zone_id,
+            API_ON: 1,
         }
-        if hvac_mode == HVAC_MODE_OFF:
+        await self._async_update_hvac_params(params)
+
+    async def async_turn_off(self) -> None:
+        """Turn the entity off."""
+        params = {
+            API_ON: 0,
+        }
+        await self._async_update_hvac_params(params)
+
+    async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
+        """Set hvac mode."""
+        params = {}
+        if hvac_mode == HVACMode.OFF:
             params[API_ON] = 0
         else:
             mode = HVAC_MODE_HASS_TO_LIB[hvac_mode]
-            if mode != self.get_zone_value(AZD_MODE):
-                if self.get_zone_value(AZD_MASTER):
+            if mode != self.get_airzone_value(AZD_MODE):
+                if self.get_airzone_value(AZD_MASTER):
                     params[API_MODE] = mode
                 else:
                     raise HomeAssistantError(
                         f"Mode can't be changed on slave zone {self.name}"
                     )
             params[API_ON] = 1
-        _LOGGER.debug("Set hvac_mode=%s params=%s", hvac_mode, params)
         await self._async_update_hvac_params(params)
 
     async def async_set_temperature(self, **kwargs) -> None:
         """Set new target temperature."""
-        temp = kwargs.get(ATTR_TEMPERATURE)
         params = {
-            API_SYSTEM_ID: self.system_id,
-            API_ZONE_ID: self.zone_id,
-            API_SET_POINT: temp,
+            API_SET_POINT: kwargs.get(ATTR_TEMPERATURE),
         }
-        _LOGGER.debug("Set temp=%s params=%s", temp, params)
         await self._async_update_hvac_params(params)
 
     @callback
@@ -176,16 +178,16 @@ class AirzoneClimate(AirzoneEntity, ClimateEntity):
     @callback
     def _async_update_attrs(self) -> None:
         """Update climate attributes."""
-        self._attr_current_temperature = self.get_zone_value(AZD_TEMP)
-        self._attr_current_humidity = self.get_zone_value(AZD_HUMIDITY)
-        if self.get_zone_value(AZD_ON):
-            mode = self.get_zone_value(AZD_MODE)
+        self._attr_current_temperature = self.get_airzone_value(AZD_TEMP)
+        self._attr_current_humidity = self.get_airzone_value(AZD_HUMIDITY)
+        if self.get_airzone_value(AZD_ON):
+            mode = self.get_airzone_value(AZD_MODE)
             self._attr_hvac_mode = HVAC_MODE_LIB_TO_HASS[mode]
-            if self.get_zone_value(AZD_DEMAND):
+            if self.get_airzone_value(AZD_DEMAND):
                 self._attr_hvac_action = HVAC_ACTION_LIB_TO_HASS[mode]
             else:
-                self._attr_hvac_action = CURRENT_HVAC_IDLE
+                self._attr_hvac_action = HVACAction.IDLE
         else:
-            self._attr_hvac_action = CURRENT_HVAC_OFF
-            self._attr_hvac_mode = HVAC_MODE_OFF
-        self._attr_target_temperature = self.get_zone_value(AZD_TEMP_SET)
+            self._attr_hvac_action = HVACAction.OFF
+            self._attr_hvac_mode = HVACMode.OFF
+        self._attr_target_temperature = self.get_airzone_value(AZD_TEMP_SET)

homeassistant/components/airzone/config_flow.py

@@ -3,18 +3,30 @@ from __future__ import annotations
 
 from typing import Any
 
-from aioairzone.common import ConnectionOptions
-from aioairzone.exceptions import InvalidHost
-from aioairzone.localapi import AirzoneLocalApi
-from aiohttp.client_exceptions import ClientConnectorError
+from aioairzone.const import DEFAULT_PORT, DEFAULT_SYSTEM_ID
+from aioairzone.exceptions import AirzoneError, InvalidSystem
+from aioairzone.localapi import AirzoneLocalApi, ConnectionOptions
 import voluptuous as vol
 
 from homeassistant import config_entries
-from homeassistant.const import CONF_HOST, CONF_PORT
+from homeassistant.const import CONF_HOST, CONF_ID, CONF_PORT
 from homeassistant.data_entry_flow import FlowResult
 from homeassistant.helpers import aiohttp_client
+from homeassistant.helpers.device_registry import format_mac
 
-from .const import DEFAULT_LOCAL_API_PORT, DOMAIN
+from .const import DOMAIN
+
+CONFIG_SCHEMA = vol.Schema(
+    {
+        vol.Required(CONF_HOST): str,
+        vol.Required(CONF_PORT, default=DEFAULT_PORT): int,
+    }
+)
+SYSTEM_ID_SCHEMA = CONFIG_SCHEMA.extend(
+    {
+        vol.Required(CONF_ID, default=1): int,
+    }
+)
 
 
 class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
@@ -24,39 +36,43 @@ class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
         self, user_input: dict[str, Any] | None = None
     ) -> FlowResult:
         """Handle the initial step."""
+        data_schema = CONFIG_SCHEMA
         errors = {}
 
         if user_input is not None:
-            self._async_abort_entries_match(
-                {
-                    CONF_HOST: user_input[CONF_HOST],
-                    CONF_PORT: user_input[CONF_PORT],
-                }
-            )
+            self._async_abort_entries_match(user_input)
 
             airzone = AirzoneLocalApi(
                 aiohttp_client.async_get_clientsession(self.hass),
                 ConnectionOptions(
                     user_input[CONF_HOST],
                     user_input[CONF_PORT],
+                    user_input.get(CONF_ID, DEFAULT_SYSTEM_ID),
                 ),
             )
 
             try:
-                await airzone.validate_airzone()
-            except (ClientConnectorError, InvalidHost):
+                mac = await airzone.validate()
+            except InvalidSystem:
+                data_schema = SYSTEM_ID_SCHEMA
+                errors[CONF_ID] = "invalid_system_id"
+            except AirzoneError:
                 errors["base"] = "cannot_connect"
             else:
+                if mac:
+                    await self.async_set_unique_id(format_mac(mac))
+                    self._abort_if_unique_id_configured(
+                        updates={
+                            CONF_HOST: user_input[CONF_HOST],
+                            CONF_PORT: user_input[CONF_PORT],
+                        }
+                    )
+
                 title = f"Airzone {user_input[CONF_HOST]}:{user_input[CONF_PORT]}"
                 return self.async_create_entry(title=title, data=user_input)
 
         return self.async_show_form(
             step_id="user",
-            data_schema=vol.Schema(
-                {
-                    vol.Required(CONF_HOST): str,
-                    vol.Required(CONF_PORT, default=DEFAULT_LOCAL_API_PORT): int,
-                }
-            ),
+            data_schema=data_schema,
             errors=errors,
         )

homeassistant/components/airzone/const.py

@@ -11,7 +11,6 @@ MANUFACTURER: Final = "Airzone"
 
 AIOAIRZONE_DEVICE_TIMEOUT_SEC: Final = 10
 API_TEMPERATURE_STEP: Final = 0.5
-DEFAULT_LOCAL_API_PORT: Final = 3000
 
 TEMP_UNIT_LIB_TO_HASS: Final[dict[TemperatureUnit, str]] = {
     TemperatureUnit.CELSIUS: TEMP_CELSIUS,

homeassistant/components/airzone/coordinator.py

@@ -4,8 +4,8 @@ from __future__ import annotations
 from datetime import timedelta
 import logging
 
+from aioairzone.exceptions import AirzoneError
 from aioairzone.localapi import AirzoneLocalApi
-from aiohttp.client_exceptions import ClientConnectorError
 import async_timeout
 
 from homeassistant.core import HomeAssistant
@@ -36,7 +36,7 @@ class AirzoneUpdateCoordinator(DataUpdateCoordinator):
         """Update data via library."""
         async with async_timeout.timeout(AIOAIRZONE_DEVICE_TIMEOUT_SEC):
             try:
-                await self.airzone.update_airzone()
-            except ClientConnectorError as error:
+                await self.airzone.update()
+            except AirzoneError as error:
                 raise UpdateFailed(error) from error
             return self.airzone.data()

homeassistant/components/airzone/diagnostics.py

@@ -0,0 +1,29 @@
+"""Support for the Airzone diagnostics."""
+from __future__ import annotations
+
+from typing import Any
+
+from aioairzone.const import AZD_MAC
+
+from homeassistant.components.diagnostics.util import async_redact_data
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+
+from .const import DOMAIN
+from .coordinator import AirzoneUpdateCoordinator
+
+TO_REDACT = [
+    AZD_MAC,
+]
+
+
+async def async_get_config_entry_diagnostics(
+    hass: HomeAssistant, config_entry: ConfigEntry
+) -> dict[str, Any]:
+    """Return diagnostics for a config entry."""
+    coordinator: AirzoneUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+
+    return {
+        "info": async_redact_data(config_entry.data, TO_REDACT),
+        "data": async_redact_data(coordinator.data, TO_REDACT),
+    }

homeassistant/components/airzone/manifest.json

@@ -3,7 +3,7 @@
   "name": "Airzone",
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/airzone",
-  "requirements": ["aioairzone==0.3.3"],
+  "requirements": ["aioairzone==0.4.3"],
   "codeowners": ["@Noltari"],
   "iot_class": "local_polling",
   "loggers": ["aioairzone"]

homeassistant/components/airzone/sensor.py

@@ -6,38 +6,34 @@ from typing import Any, Final
 from aioairzone.const import AZD_HUMIDITY, AZD_NAME, AZD_TEMP, AZD_TEMP_UNIT, AZD_ZONES
 
 from homeassistant.components.sensor import (
-    STATE_CLASS_MEASUREMENT,
+    SensorDeviceClass,
     SensorEntity,
     SensorEntityDescription,
+    SensorStateClass,
 )
 from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import (
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_TEMPERATURE,
-    PERCENTAGE,
-    TEMP_CELSIUS,
-)
+from homeassistant.const import PERCENTAGE, TEMP_CELSIUS
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
 
-from . import AirzoneEntity
+from . import AirzoneEntity, AirzoneZoneEntity
 from .const import DOMAIN, TEMP_UNIT_LIB_TO_HASS
 from .coordinator import AirzoneUpdateCoordinator
 
-SENSOR_TYPES: Final[tuple[SensorEntityDescription, ...]] = (
+ZONE_SENSOR_TYPES: Final[tuple[SensorEntityDescription, ...]] = (
     SensorEntityDescription(
-        device_class=DEVICE_CLASS_TEMPERATURE,
+        device_class=SensorDeviceClass.TEMPERATURE,
         key=AZD_TEMP,
         name="Temperature",
         native_unit_of_measurement=TEMP_CELSIUS,
-        state_class=STATE_CLASS_MEASUREMENT,
+        state_class=SensorStateClass.MEASUREMENT,
     ),
     SensorEntityDescription(
-        device_class=DEVICE_CLASS_HUMIDITY,
+        device_class=SensorDeviceClass.HUMIDITY,
         key=AZD_HUMIDITY,
         name="Humidity",
         native_unit_of_measurement=PERCENTAGE,
-        state_class=STATE_CLASS_MEASUREMENT,
+        state_class=SensorStateClass.MEASUREMENT,
     ),
 )
 
@@ -48,12 +44,12 @@ async def async_setup_entry(
     """Add Airzone sensors from a config_entry."""
     coordinator = hass.data[DOMAIN][entry.entry_id]
 
-    sensors = []
+    sensors: list[AirzoneSensor] = []
     for system_zone_id, zone_data in coordinator.data[AZD_ZONES].items():
-        for description in SENSOR_TYPES:
+        for description in ZONE_SENSOR_TYPES:
             if description.key in zone_data:
                 sensors.append(
-                    AirzoneSensor(
+                    AirzoneZoneSensor(
                         coordinator,
                         description,
                         entry,
@@ -68,6 +64,15 @@ async def async_setup_entry(
 class AirzoneSensor(AirzoneEntity, SensorEntity):
     """Define an Airzone sensor."""
 
+    @property
+    def native_value(self):
+        """Return the state."""
+        return self.get_airzone_value(self.entity_description.key)
+
+
+class AirzoneZoneSensor(AirzoneZoneEntity, AirzoneSensor):
+    """Define an Airzone Zone sensor."""
+
     def __init__(
         self,
         coordinator: AirzoneUpdateCoordinator,
@@ -78,16 +83,14 @@ class AirzoneSensor(AirzoneEntity, SensorEntity):
     ) -> None:
         """Initialize."""
         super().__init__(coordinator, entry, system_zone_id, zone_data)
+
         self._attr_name = f"{zone_data[AZD_NAME]} {description.name}"
-        self._attr_unique_id = f"{entry.entry_id}_{system_zone_id}_{description.key}"
+        self._attr_unique_id = (
+            f"{self._attr_unique_id}_{system_zone_id}_{description.key}"
+        )
         self.entity_description = description
 
         if description.key == AZD_TEMP:
             self._attr_native_unit_of_measurement = TEMP_UNIT_LIB_TO_HASS.get(
-                self.get_zone_value(AZD_TEMP_UNIT)
+                self.get_airzone_value(AZD_TEMP_UNIT)
             )
-
-    @property
-    def native_value(self):
-        """Return the state."""
-        return self.get_zone_value(self.entity_description.key)

homeassistant/components/airzone/strings.json

@@ -4,7 +4,8 @@
       "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
     },
     "error": {
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "invalid_system_id": "Invalid Airzone System ID"
     },
     "step": {
       "user": {