This adds an operator config setting ROOK_REVISION_HISTORY_LIMIT
defaulting to kubernetes'value for RevisionHistoryLimit.
If configured, the provided value will be used as RevisionHistoryLimit
for all Deployments rook creates.
Fixes: #12722
Signed-off-by: Michael Adam <obnox@samba.org>
default application name is updated inside the `CreatePool` method. Send
pool spec as address in order to preserve this change.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Only single pool will get created if there are multiple
data pool entries with same name. This PR just adds a check
to fail if duplicate pools are present.
Signed-off-by: sp98 <sapillai@redhat.com>
SVG cleanup job uses the cephSubvolumeGroup env name
from spec.Name. But sometimes it can be empty. In that
case rook should use the CR name.
Signed-off-by: sp98 <sapillai@redhat.com>
Someone testing the Multus holder pod removal feature encountered an
issue where the migration process failed to lead to a system state where
PVCs could be created successfully.
The root cause was found to be a ceph csi config map wherein the primary
CephCluster entry was lacking a value for the "namespace" field.
I observed this once in my development on the holder pod removal
feature, but I was unable to reproduce and assumed it was my own error.
Since this has been seen in a user environment, it must be that the
error is a race condition, and I am unable to determine the exact source
of the bug.
I do not believe this bug would be present if the code that updates the
CSI configmap were properly idempotent, but it has many conditions based
on prior states, and I was unable to determine how to resolve this
underlying impelementation pattern issue.
Instead, I opted to separate the `clusterKey` parameter into two clear
parts:
1. `clusterID` for when `clusterKey` is used as an analogue for
`clusterID`
2. `clusterNamespace` for when `clusterKey` is used as an analogue for
`clusterNamespace`
I added unit tests to ensure that SaveClusterConfig() will be able to
detect when the namespace is currently missing, and using the new
`clusterNamespace` field, it should always know what value to use as
input when correcting the bug in already-installed systems.
I also verified that this update works when the function simultaneously
removes netNamespaceFilePath entries, and that those entries are removed
properly.
Finally, manual testing also verifies the change.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
The mds standby test was timing out after six seconds on
three different attempts, causing a single unit test to
take almost 20 seconds. Now we reduce the wait time to
a total of three seconds.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Cleanup the resources created by subvolumegroup
when its deleted. Following resources will be cleaned up:
- OMAP value
- OMAP keys
- Clones
- Snapshots
- Subvolumes
Signed-off-by: sp98 <sapillai@redhat.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
Corrected the NetNamespaceFilePath generation in the
subvolumegroup & radosnamespace controller by replacing
the cephCluster.Name with cephCluster.Namespace.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit uses an csi config map API exposed by Ceph-CSI.
This will reduce the efforts of keeping the configuration in
sync with Ceph-CSI.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit updates default cephcsi driver version
to v3.10.0 and filesystem reconciler now creates
csi subvolumegroup by default.
Signed-off-by: Rakshith R <rar@redhat.com>
Originally we create it using this cmd
ceph fs subvolume create <vol_name> <subvol_name>
So we can have 2 variables filesystem and subvolume name,
Currently the CR doesn't allow us to make subvolume-name
as constant as needed to "csi" because of k8s limitations
Signed-off-by: parth-gr <paarora@redhat.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
During certain maintenance tasks the admin will own running
operations on the ceph mgr, rgw, mds and rbd-mirror daemons
and the operator should not interfere with those operations.
Co-authored-by: gauravsitlani <gaurav.sitlani@live.com>
Signed-off-by: subhamkrai <srai@redhat.com>
The activeStandby property of the filesystem CR was not
taking effect when changed from true to false. The standby
was only being enabled when true, but never applied when
changed to false.
Signed-off-by: travisn <tnielsen@redhat.com>
Change how Rook detects network CIDRs for Multus networks. The IPAM
configuration is only defined as an arbitrary string JSON blob with a
"type" field and nothing more. Rook's detection of CIDRs for whereabouts
had already grown out of date since the initial implementation.
Additionally, Rook did not support DHCP IPAM, which is a reasonable
choice for users. And more, Rook did not support CNI plugin chaining,
which further complicates NADs. Based on the CNI spec, network chaning
can result in any changes to network CIDRs from the first-given plugin.
All these problems make it more and more difficult for Rook to support
Multus by inspecting the NAD itself to predict network CIDRs. Instead,
it is better for Rook to treat the CNI process as a black box. To
preserve legacy functionality of auto-detecting networks and to make
that as robust as possible, change to a canary-style architecture like
that used for Ceph mons, from which Rook will detect the network CIDRs
if possible.
Also allow users to specify overrides for CIDR ranges. This allows Rook
to still support esoteric and unexpected NAD or network configurations
where a CIDR range is not detectable or where the range detected would
be incomplete. Because it may be impossible for Rook to understand the
network CIDRs wholistically while residing only on a portion of the
network, this feature should have been present from Multus's inception.
Improving CIDR auto-detection and allowing users to specify overrides
for auto-detected CIDRs rounds out Rook's Multus support for CephCluster
(core/RADOS) installations. No further architectural changes should be
needed for CephClusters as regards application of public/cluster network
CIDRs for Multus networks.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
We need to restart all the ceph daemons whenever
cephCluster network settings are modified like
requiremsgr2, encryption and compression. This
required for Ceph to consider the new settings
it require new ceph daemons all over.
Signed-off-by: subhamkrai <srai@redhat.com>
When msgr2 is required, ensure the mon endpoints passed to
the csi configmap are on port 3300. The mons will be
listening on both 6789 and 3300. Existing volumes can
continue using port 6789 while new volumes will use
port 3300.
Signed-off-by: travisn <tnielsen@redhat.com>
to support mds with multus, we don't need
to add `--public-adr`, if multus is selected as
the network in cephCluster CR.
Signed-off-by: subhamkrai <srai@redhat.com>
CephFS object fails to do a initial status update.
Operator shows the following error message in logs,
'Error while updation: Operation cannot be fulfilled on
cephfilesystems.ceph.rook.io "myfs": the object has been
modified; please apply your changes to the latest version
and try again'
Function 'updateStatus' now returns the new/updated
CephFilesystem object if successfully updated or nil.
Signed-off-by: Arun Kumar Mohan <amohan@redhat.com>
Introduce a new env variable ROOK_CSI_IMAGE_PULL_POLICY in rook operator configmap which should be used to
customize the imagePullPolicy for the csi driver and imagePullPolicy property in cephVersionSpec for ceph pods.
Signed-off-by: Avan Thakkar <athakkar@redhat.com>
if Multus is enabled the clusterinfo should be updated with
network as multus as to run the ceph cmds in remote
executor
Signed-off-by: parth-gr <paarora@redhat.com>
The cephcluster.ClusterName is no longer available in the k8s api
with the ObjectMeta type, so we use the cephcluster.Name
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit replaces `os.Setenv` with `t.Setenv` in tests. The
environment variable is automatically restored to its original value
when the test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.Setenv
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
With octopus coming to end of life, we remove support from
Rook for deploying Ceph Octopus and assume a min version of
Pacific v16. Any checks for octopus or earlier are removed
from the reconciles since they are obsolete.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Block deletion of CephFilesystems when there are any raw Ceph
subvolumegroups present that have subvolumes in them. Empty
subvolumegroups will not block deletion.
One important subvolume group is "csi" which is the default location
where CSI subvolumes are kept. If this group is empty, it means that
there are no PVCs created based on the CephFilesystem in question. This
also holds true if there are external consumers of the filesystem in
external cluster mode.
Similarly, if there are any subvolumegroups (for example "_nogroup",
which includes subvolumes in the filesystem root) that contain
manually-created subvolumes, Rook will also see this and block deletion.
This comes into play currently with manually-created NFS exports.
A work-in progress aims to create a Ceph-CSI NFS export provisioner
which will likely create subvolumes in the "csi" group as well. This
implementation will catch this case also.
Rook still checks for CephFilesystemSubVolumeGroups explicitly in
addition to the check added here. This is to ensure that even empty
groups will block deletion if they are created via this CR type.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Michael Adam
Santosh Pillai
subhamkrai
Satoru Takeuchi
Blaine Gardner
Travis Nielsen
NymanRobin
Madhu Rajanna
parth-gr
Praveen M
parth-gr
Rakshith R
gauravsitlani
guoguangwu
Blaine Gardner
zhucan
Avan Thakkar
Arun Kumar Mohan
Joseph Lee
Eng Zer Jun
Josh Soref