This patch adds `pgHealthyRegex` field to DisruptionManagementSpec.
`pgHealthyRegex` is a regular expression that is used to determine which
PG states should be considered healthy. The default value of
`pgHealthyRegex` is:
^(active\+clean|active\+clean\+scrubbing|active\+clean\+scrubbing\+deep)$
which is effectively the same as before.
Signed-off-by: Ryotaro Banno <ryotaro.banno@gmail.com>
During certain maintenance tasks the admin will own running
operations on the ceph mgr, rgw, mds and rbd-mirror daemons
and the operator should not interfere with those operations.
Co-authored-by: gauravsitlani <gaurav.sitlani@live.com>
Signed-off-by: subhamkrai <srai@redhat.com>
When OSDs flap, ceph stops the OSD daemon if its marked down greater than
5 times in 600 seconds. But OSD pod restarts and marks the OSD `up` again.
This causes the PGs mapped to these OSDs to peer. While the PGs are peering,
IO to these PGs are blocked.
So we need to ensure that if ceph is marking OSD `down` due to flapping, OSD pod
should not restart to mark the OSDs `up` again.
This PR adds a sleep to the OSD pod if the container returned with a 0 exit code
Default behavior is to sleep for 6 hrs. But user can configure it from the
ceph cluster spec.
Signed-off-by: sp98 <sapillai@redhat.com>
Change how Rook detects network CIDRs for Multus networks. The IPAM
configuration is only defined as an arbitrary string JSON blob with a
"type" field and nothing more. Rook's detection of CIDRs for whereabouts
had already grown out of date since the initial implementation.
Additionally, Rook did not support DHCP IPAM, which is a reasonable
choice for users. And more, Rook did not support CNI plugin chaining,
which further complicates NADs. Based on the CNI spec, network chaning
can result in any changes to network CIDRs from the first-given plugin.
All these problems make it more and more difficult for Rook to support
Multus by inspecting the NAD itself to predict network CIDRs. Instead,
it is better for Rook to treat the CNI process as a black box. To
preserve legacy functionality of auto-detecting networks and to make
that as robust as possible, change to a canary-style architecture like
that used for Ceph mons, from which Rook will detect the network CIDRs
if possible.
Also allow users to specify overrides for CIDR ranges. This allows Rook
to still support esoteric and unexpected NAD or network configurations
where a CIDR range is not detectable or where the range detected would
be incomplete. Because it may be impossible for Rook to understand the
network CIDRs wholistically while residing only on a portion of the
network, this feature should have been present from Multus's inception.
Improving CIDR auto-detection and allowing users to specify overrides
for auto-detected CIDRs rounds out Rook's Multus support for CephCluster
(core/RADOS) installations. No further architectural changes should be
needed for CephClusters as regards application of public/cluster network
CIDRs for Multus networks.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
We need to restart all the ceph daemons whenever
cephCluster network settings are modified like
requiremsgr2, encryption and compression. This
required for Ceph to consider the new settings
it require new ceph daemons all over.
Signed-off-by: subhamkrai <srai@redhat.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
This PR makes Rook operator to add a label on PVC that contains an image version of Ceph when creating an OSD.
Signed-off-by: YZ775 <yuzuki-mimura@cybozu.co.jp>
Signed-off-by: avanthakkar <avanjohn@gmail.com>
Volume "ceph-daemons-sock-dir" is coming empty in case if dataDirHostPath,
which is the case for osd onPVC. Fix the volume creation by using the
ceph cluster spec dataDirHostPath, which allows to run socket commands
on osd containers.
The journal size was only applicable to the filestore OSD
format which has not been supported by rook since v1.2.
Remove the remaining obsolete setting from the examples and
code.
Signed-off-by: travisn <tnielsen@redhat.com>
The defaults in CRDs cause an update and trigger a new
reconcile if the value is not set. For the key rotation
setting, the default was only being updated when the kms
feature was enabled. This update was causing the reconcile
to fail in the kms tests. With the default now in code,
the default can remain empty and no cr update will trigger
a new reconcile unexpectedly.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit adds util function to create key rotation cron job
such as getKeyRotationContainer, getKeyRotationCronPodTemplateSpec
and makeKeyRotationCronJob.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds functionality to be able to rotate
key encryption key of encrypted PVC backed OSDs.
Necessary changes such as adding update functionality
to kms and rbac changes are made as well.
Signed-off-by: Rakshith R <rar@redhat.com>
The osd needs to bind to an ip that will allow both internal
and external access for rbd mirroring scenarios.
THe operator will create a service for each osd and
instruction the osd to bind to the pod ip while
publishing the clusterIP of the service as the
public IP.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 14e7225e0a18aff85ede1d476fcaddbbfbcbb732)
If a kernel device name change happens and a block device file
in the OSD directory becomes dangling link, this OSD fails
to start continuously. This problem can be resolved by confirming
the validity of the device file and recreating it if necessary.
The original problem happened in host-based clusters. A similar
problem exists in PVC-based clusters. In this case, if a PV,
corresponds to an existing OSD, and points to a missing block
device file, the OSD pod fails to consume this PV. Although this
behavior is undesirable, I don't think this problem should be
handled in Rook. If doing so, we must re-create the existing PV.
Rook shouldn't do such work.
Closes: https://github.com/rook/rook/issues/10860
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
few functions got change as they were deprecated
for ex: ioutil.Readfile change to os.Readfile
ioutil.TempFile change to os.CreateTemp
And fixed golang-ci-lint-issues
Signed-off-by: parth-gr <paarora@redhat.com>
This commit adds code to supply variables required
to enable read affinity for rbd volumes.
It leverages `read_from_replica=localize,crush_locations=key:value`
krbd map option from ceph to serve reads from the most local OSD.
refer:
https://docs.ceph.com/en/latest/man/8/rbd/#kernel-rbd-krbd-options
Signed-off-by: Rakshith R <rar@redhat.com>
The rook-version tag must not be set on the pod spec labels
since it will result in the ceph daemons being restarted every
time there is a rook version update, even if the ceph version
or pod spec was not otherwise updated.
The rook-version tag was being added to the OSD pod spec
due to a shared pointer to the labels. The code intended
to only add the version label to the deployment labels,
but since the pod labels shared the map variable, the
pod unintentionally also had the version label added.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Environment variables are not recommended for secrets in pods since
they can be easily leaked if the environemnt variables are logged.
By mounting the mon secret as a file, the mgr and osd prepare pods
can read the mon secret from a file for better security.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The volume names of a pod must follow the standard naming convention
which does not allow periods in the name. Since the device set name
is used as the pvc name and then the volume name to attach to the osd
prepare job, we must sanitize the name for the invalid character
and replace it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit implements this corner case during osd-prepare job.
```
The encrypted block is not opened, this is an extreme corner case
The OSD deployment has been removed manually AND the node rebooted
So we need to re-open the block to re-hydrate the OSDInfo.
Handling this case would mean, writing the encryption key on a
temporary file, then call luksOpen to open the encrypted block and
then call ceph-volume to list against the opened encrypted block.
We don't implement this, yet and return an error.
```
When underlying PVC for osd are CSI provisioned, the encrypted device
is closed when PVC is unmounted due to osd pod being deleted.
Therefore, this may occur more frequently and needs to be handled.
This commit implements the fix for the same.
Signed-off-by: Rakshith R <rar@redhat.com>
The fsid, username, and user secrets were from legacy and no
longer needed on the osd daemon or mon pods. This removes the
unnecessary env vars from the pod specs.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A new variable is added to rook-ceph-operator-config
ConfigMap to allow using loop devices for osd.
This feature is intended to be used for testing purposes only.
Signed-off-by: Shinya Hayashi <shinya-hayashi@cybozu.co.jp>