Normally the device class of an OSD is determined at provisioning
and is not updated thereafter. In some scenarios the admin may
want to force update the device class to a new value. The device
classes can be updated by first setting allowDeviceClassUpdate
in the storage spec of the cephcluster, then updating the
device class specified on the deviceSets or other OSDs.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
initially, we have the limit of 40 char set on
storageclassdeviceset.Name but seems like that is not enough and
upgrade clusters can face issue with this. So, increasing the limit to
50.
Signed-off-by: subhamkrai <srai@redhat.com>
The snyk security check started failing with a warning
about the package being outdated:
github.com/libopenstorage/secrets/azure which depends on
github.com/Azure/azure-sdk-for-go/sdk/azidentity.
These and related packages are now updated.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this will be disabled by default but in scenarios where the user want to
update failureDomain, DeviceClass etc, this option can be enabled, to be
noted this can lead to lot of data rebalancing and remapping. Use with
caution
Signed-off-by: Deepika Upadhyay <deepika.upadhyay@clyso.com>
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This PR adds a `settings` option in the `Module` struct
which can help users to futher customize the `balancer`
module with a differet mode.
Signed-off-by: sp98 <sapillai@redhat.com>
LVM-based OSDs on PVCs are legacy and are not well tested.
Therefore, we add status to the cephcluster CR that at least
gives a clue that the OSDs should be replaced.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
there are some cases where storageClassDeviceSets length
are more 63 chars and osd provisioned failed due to this.
with error
```
failed to run osd provisioning job for PVC "ocs-deviceset-*-local-volume-storageclass-0-data-*": Job.batch "rook-ceph-osd-prepare-*" is invalid: [spec.template.spec.volumes[10].name: Invalid value: "ocs-deviceset-*-local-volume-storageclass-0-data-*": must be no more than 63 characters, spec.template.spec.containers[0].volumeMounts[9].name: Not found: "ocs-deviceset-*-local-volume-storageclass-0-data-*",
```
Using x-validator to limit the maxLength to the deviceClassSet.Name to
40 chars and adding code check that overall pvc name should be less than
63 chars.
Signed-off-by: subhamkrai <srai@redhat.com>
Unlike other components, the Ceph dashboard Service object could not be
configured with custom labels and annotations. This can be useful when
integrating Rook into a cluster with custom controllers similarly to how
the RGW service is customized.
Signed-off-by: Steven Fackler <sfackler@gmail.com>
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
For check if cluster PGs are healthy before osd updates
Which helps gainning more confidence in the osd upgrades
Signed-off-by: mmaoyu <wupiaoyu61@gmail.com>
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
this commits updates the go version to 1.22.2 in govulncheck ci and
also updates golang.org/x/net to v0.23.0 to fix the ci
Signed-off-by: subhamkrai <srai@redhat.com>
make the kubectl output for crds more verbose.
Following changes was done for each crd:
CephBlockPool:
Added print columns:
- Type
- FailureDomain
- Replication
- EC-CodingChunks
- EC-DataChunks
- Age
Extended info field of status to include:
type and failureDomain
CephObjectStore:
Added print columns:
- Endpoint
- SecureEndpoint
- Age
Added Age to print columns of following crds:
CephObjectStoreUser, CephObjectZoneGroup,
CephObjectZone, CephBucketTopic, CephClient,
CephRBDMirror, CephFilesystemMirror,
CephFilesystemSubVolumeGroup
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
Until now, an object store would create all the necessary
metadata pools and the data pool that were exclusively
for its own object store. When isolation between object
stores is necessary, this would cause many pools and
PGs to be created in the cluster, which was not
manageable.
Now one set of pools can be created to be shared
by any number of object stores. The metadata and data
between each object store is isolated by
RADOS namespaces, which by design will keep the
data safe for multi-tenancy.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Reduce CRD size by removing some descriptions for things that
(a) are long, (b) are repeated, and (c) are commong kubernetes types.
Remove the `Status` field from VolumeClaimTemplates (a.k.a. PVCs) in
types.go to remove all unnecessary status-related fields.
Use `yq` to go through generated `crds.yaml` to strip out descriptions
for well-known k8s types that are long and repeated where we can't
remove them from types.go. This is mostly placement descriptions and
volumeSource descriptions.
The overall `crds.yaml` file is reduced to less than 60% of its original
size.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Co-authored-by: Blaine Gardner <blaine.gardner@ibm.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
Fixes: #13692
Since the introduction of the "host" network provider, the legacy
"hostNetwork" setting is intended to be used only in combination with
the default network provider (""), but the code did not enforce this.
This change adds the required validation checks to throw errors
in invalid constellations.
These checks are added both in the operator's input validation code
and as kubernetes x-validation admission policies in the Cepcluster CRD.
Signed-off-by: Michael Adam <obnox@samba.org>
dependabot[bot]
yingshanghuangqiao
Travis Nielsen
Blaine Gardner
subhamkrai
Deepika Upadhyay
Michael Adam
sp98
Steven Fackler
NymanRobin
clonefetch
mmaoyu
Madhu Rajanna
Liang Zheng
subham rai
Jiffin Tony Thottan
parth-gr
Redouane Kachach