The daily upgrade tests were checking for a specific
version of the rook image instead of the local_build tag
that is set as the rook base image since 14486.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The helm upgrade tests have been failing frequently, but not
always, on the oldest version of K8s that is tested in the CI
for the past few months. Add a retry to attempt to get
the CI passing more consistently.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The upgrade tests in master have been upgrading from 1.13 to
master. In anticipation of the v1.15 release, we change
the upgrade tests to start from v1.14 to test if there
are any regressions in the supported upgrades.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The daily ceph upgrade tests were running on Rook v1.13.
This was causing the squid upgrade tests to fail since
1.13 does not support Squid. The purpose of the upgrade
tests is to test the ceph upgrades, therefore the daily
tests will just test them based on rook master.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With the release of the first squid RC, we add squid
to the supported versions and add tests to run
Rook against the squid release.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In order to help users check that they have implemented the newly-added
Multus host configuration prerequisites, add a check to the validation
tool to verify connectivity.
Because users who are already running clusters with Multus enabled, add
a flag that allows users to only check for host configuration
prerequisites. This mode will not start the large number of clients that
would normally be started because those clients could disrupt a running
Rook cluster negatively.
Host checking pods require host network access. Many Kubernetes
distributions have pod security features enabled. In order to allow
non-Vanilla distros to run this tool, allow specifying a service account
that pods will run as, which can be configured by the admin to allow
test pods.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Now user can pass the cli flags using config file and
also command line argument,
if mentioned at both the place priority is given to
command line argument
Signed-off-by: parth-gr <partharora1010@gmail.com>
Add IPv6 support for multus validation tool. Also test that IPv6 support
works by specifying one of the NetAttachDefs with an IPv6 address range.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
mkdocs uses a markdown renderer that is hardcoded to 4 spaces per tab
for detecting indentation levels, including ordered- and
unordered-lists. Since we cannot easily change the renderer, begin using
a markdown linter in CI that will fail if official docs do not adhere to
the spacing rules.
As a starting point, the markdownlint config does not begin with the
default set of checks, which might overwhelm attempts to fix them.
Instead, focus on list-tab-spacing rules and a few other highly useful
checks.
markdownlint also has some gaps in its abilities that allow common Rook
doc issues to pass acceptance. However, it allows creating custom
linting plugins. Create 2 such linting plugins to check 2 things:
- all doc lines (except code blocks) must be aligned to a 4-space
boundary, without exception. This ensures that markdown will render
correctly with mkdocs. This unfortunately makes it possible to create
lists that are internally aligned strangely.
- admonitions must all follow the same format of
```
!!! header
body
```
For the strange lists, this is allowed and renders correctly, but it
looks strange:
```md
- first bullet
- second bullet
still second bullet
- third bullet
has a paragraph
of text inside
- last bullet
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Until now, an object store would create all the necessary
metadata pools and the data pool that were exclusively
for its own object store. When isolation between object
stores is necessary, this would cause many pools and
PGs to be created in the cluster, which was not
manageable.
Now one set of pools can be created to be shared
by any number of object stores. The metadata and data
between each object store is isolated by
RADOS namespaces, which by design will keep the
data safe for multi-tenancy.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With the release of Reef v18.2.2 we update the default
recommended version of Ceph to fix the prometheus issues
seen with v18.2.1
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The upgrade test should always upgrade from the
previous minor release to the latest master. With 1.14
releasing soon, now we upgrade from 1.13 to master,
to confirm if there are any upgrade issues to 1.14.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pg_autoscaler is always enabled by ceph and cannot be disabled.
In a previous PR the pg_autoscaler config was removed from the main example.
Now the remaining config for the pg_autoscaler is removed as well.
Signed-off-by: travisn <tnielsen@redhat.com>
For nightly jobs, canary tests are all running with the same job IDs,
making the last-run jobs cancel previous runs. Add a workflow-id
parameter to canary jobs that can be used to give each job in a canary
suite a unique job ID to prevent this.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
upgrading minimum kubernetes supported version to v1.24.17
and also upgrading other kubernetes version to their latest
respective version.
Signed-off-by: subhamkrai <srai@redhat.com>
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
The 'extra' block device attached to GH actions runners has changed size
twice in 3 months. The previous strategy of detecting the disk by size
is becoming harder to maintain. Additionally, the block size with recent
changes (75G) is now the same as the boot device (also 75G), making the
method inexact.
The method can now be summarized as, "find the boot disk and choose the
disk that isn't the boot disk to be the 'extra' one used."
Prior to this, we used a one-liner based on `lsblk`. While we could
still make this a one-liner, the method is now updated to 2 effective
lines, plus debug text output to stderr to help if we need to debug
further in the future.
Of note, the 'extra' disk has a mount point of "/mnt", but it is unclear
whether this is a reliable heuristic for detecting the extra disk. For
years now, GH action runners have had only 2 disks. Therefore, it seems
slightly more likely that a heuristic to "choose the non-boot disk" will
be a more robust long-term solution.
If this strategy proves to be unreliable in the future, it may be wise
to consider whether "the device with a partition mounted to '/mnt'"
would be a good alternative.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
the disk size in the github action machine has
increased from 64G to 75G. Now, we detech the version
automatically not fetching hard coded value.
Co-authored-by: Jan Klippel <jan.klippel@uhurutec.com>
Signed-off-by: subhamkrai <srai@redhat.com>
For now we are using the operator namespace name
as the prefix for the csi driver, This PR provides
an option for the users if someone wants to have
their own prefix for the csi driver, if someone tries
to change the prefix for existing csi driver rook
operator will fail to reconcile the csi driver.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
so far all the arguments were being handled as separate getopts
flags introducing a lot of boilerplate code for every new flag.
The new approach improves the arguments handling by using env
variables.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Use Quay as the source for the nginx-unprivileged image used for the
Multus validation tool because Quay does not rate limit image pulls,
which are a common complaint for users of the tool.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Travis Nielsen
Blaine Gardner
Madhu Rajanna
parth-gr
Jiffin Tony Thottan
Praveen M
subhamkrai
sp98
Sunnatillo
Liang Zheng
parth-gr
Redouane Kachach