there can be a scenario where a new RNS CR is created with
the same spec.blockPoolName and spec.name, in that case we want to delete
the old RNS CR without checking dependent child resources.
Signed-off-by: subhamkrai <srai@redhat.com>
When a rados namespace is deleted, it cannot be purged
until its images and snapshots are deleted. Now a condition
is being added to the rados namespace CR status so the user
does not need to read the operator log to discover the cause.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the blockpool is deleted and there are images or
snapshots in the pool, the deletion is blocked by the
finalizer until they are all removed. The condition added
to the cephblockpool status only indicated if there were
radosnamespace dependencies. A new condition is now added
to describe if there are images or snapshots.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In some cases, for example, kube-api nods, CephBlockPool's status
could be failed to update. In that case, rook-operator does not
tries to update status again. This fix requests for requeue if pool's
status update is failed.
Signed-off-by: Peter Razumovsky <prazumovsky@mirantis.com>
When finalizers are added to the CRs, a follow-up reconcile
will be triggered due to the increased generation on the CR.
Therefore, abort the initial reconcile when adding the finalizer,
and allow the follow-up reconcile to complete the configuration.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
All existing controller runtime watches are converted to use "typed"
handlers and predicates instead of operating on `client.Object`. The
intent is to be bug for bug equivalent with the existing logic while
replacing run time type assertions and switch statements with compile
time type constraints and type casts. In several cases, functions using
assertions were split up such that each function only handles a single
Kind at a time. It is hoped that this will improve readability and
maintainability while facilitating future refactoring such as migrating
some watches to using IndexFields.
Of particular note is that the massive switch statement in
`WatchControllerPredicate()` from
`pkg/operator/ceph/controller/predicate.go` has been replaced with
generics, reflection, and splitting the obc logic into its own predicate
function. There are still many helper functions operating on
`client.Object`. These were not updated unless required by the compiler
in order to limit the size of this change. The type safety of these
funcs should be improved as followup work.
It is strongly suggested that going forward, handlers and predicates
only handle a single Kind (generic or not) and that switches / type
assertions are heavily discouraged or forbidden. This PR removed all
but a single switch statement in a predicate, which should be addressed
in future work.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
this commit add support for mirroring b/w implicit rados namespace and
defined rados namespace. To support this, rook will treat `<implicit>`
name on cephblockpool as `""` empty string. This will allow mirroring
b/w implicit and defined radosnamespace.
Signed-off-by: subhamkrai <srai@redhat.com>
today, csi operator cephConnection and client profile
CR's where not getting created in external mode. So, let's
start creating those.
Signed-off-by: subhamkrai <srai@redhat.com>
Implements #14733. Allows to set IDs of external mons to
Cluster CRD. Rook will not remove external mons from quorum
and will add external mon addresses to mon endpoints.
Use-case for external mon is to maintain quorum for 2-AZ
k8s cluster in case of zone outage.
Signed-off-by: Artem Torubarov <artem.torubarov@clyso.com>
The ci was using a pretty old version og golangci-lint.
This updates to the latest version.
Additionally, it silences some
gosec integer conversion overflow false positves
and fixes some real errors of this category
and string format errors found by golangci-lint, while at it.
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Michael Adam <obnox@samba.org>
in external mode deployments ceph iamge is not provided
and job keeps on failing to get the cephversion
fix by checking if ceph iamge is available
Signed-off-by: parth-gr <partharora1010@gmail.com>
enable and disable the status of rados namespace
mirroring by looking at statusCheck spec of blockpool
Signed-off-by: parth-gr <partharora1010@gmail.com>
currently if we disable the monitoring for cephblockpool
it didnt worked, as there was no check to cancel it
if the mirroring is still enabled
Add a check to disable the monitoring if mirroring is still enabled
closes: https://github.com/rook/rook/issues/14958
Signed-off-by: parth-gr <partharora1010@gmail.com>
This PR fixes an issue where disabling enableRBDStats in CephBlockPool did not remove
the pool from rbd_stats_pools, leading to unnecessary monitoring.
The update ensures that when enableRBDStats is set to false,
the pool is properly removed from rbd_stats_pools, optimizing resource tracking.
Signed-off-by: Oded Viner <oviner@redhat.com>
Finish the process of deprecating holder pods by removing Rook's ability
to deploy them. The intent of this change is to make the most
superficial changes possible to accomplish this. There are still
remnants of code in Rook (particularly the CSI controller) that helped
configure or deploy holder pods. Due to the risk of breaking some
features, cleanup work of hose remnants will be deferred for future
work.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This is similar to #14052 we did for radosnamespace
and this is an extension to support cleanup
at the blockpool level to cleanup the images
and the snapshots in a pool.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Modify the CR to allow mirroring of an rados namespace
to a differently named namespace on the remote cluster
1) enable rados namesapce mirroring only
if the blockpool mirrroing is enabled
2) disable blockpool mirroing only if
all the namesapce mirroing is disabled
if the rbd mirroring fails and ceph version is not supported
provide a error message with supported version details
and reason of failing
Signed-off-by: parth-gr <partharora1010@gmail.com>
default application name is updated inside the `CreatePool` method. Send
pool spec as address in order to preserve this change.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Updating the device class swallowed any error if updated
for the pool. The error was not even logged, so we couldn't
troubleshoot why the new crush rule was not applied.
Log the error for troubleshooting and also fail the pool
reconcile since the desired configuration was not applied.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Someone testing the Multus holder pod removal feature encountered an
issue where the migration process failed to lead to a system state where
PVCs could be created successfully.
The root cause was found to be a ceph csi config map wherein the primary
CephCluster entry was lacking a value for the "namespace" field.
I observed this once in my development on the holder pod removal
feature, but I was unable to reproduce and assumed it was my own error.
Since this has been seen in a user environment, it must be that the
error is a race condition, and I am unable to determine the exact source
of the bug.
I do not believe this bug would be present if the code that updates the
CSI configmap were properly idempotent, but it has many conditions based
on prior states, and I was unable to determine how to resolve this
underlying impelementation pattern issue.
Instead, I opted to separate the `clusterKey` parameter into two clear
parts:
1. `clusterID` for when `clusterKey` is used as an analogue for
`clusterID`
2. `clusterNamespace` for when `clusterKey` is used as an analogue for
`clusterNamespace`
I added unit tests to ensure that SaveClusterConfig() will be able to
detect when the namespace is currently missing, and using the new
`clusterNamespace` field, it should always know what value to use as
input when correcting the bug in already-installed systems.
I also verified that this update works when the function simultaneously
removes netNamespaceFilePath entries, and that those entries are removed
properly.
Finally, manual testing also verifies the change.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
make the kubectl output for crds more verbose.
Following changes was done for each crd:
CephBlockPool:
Added print columns:
- Type
- FailureDomain
- Replication
- EC-CodingChunks
- EC-DataChunks
- Age
Extended info field of status to include:
type and failureDomain
CephObjectStore:
Added print columns:
- Endpoint
- SecureEndpoint
- Age
Added Age to print columns of following crds:
CephObjectStoreUser, CephObjectZoneGroup,
CephObjectZone, CephBucketTopic, CephClient,
CephRBDMirror, CephFilesystemMirror,
CephFilesystemSubVolumeGroup
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
Pool name either come from CephBlockPool name or
form the CephBlockPool Spec. Use the correct name
when trying to disable mirroring.
Signed-off-by: sp98 <sapillai@redhat.com>
For image mode mirroring, if cephBlockPool.Pool.Spec.Mirroring.Enable
is set to false, then remove the peer cluster and disable mirroring on
all the pool if the user has disabled mirroring on all the pool images.
If mirroring is not disabled on all the pool images, then reconcile will
fail asking the users to manually disable mirroring on those images.
Signed-off-by: sp98 <sapillai@redhat.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
Corrected the NetNamespaceFilePath generation in the
subvolumegroup & radosnamespace controller by replacing
the cephCluster.Name with cephCluster.Namespace.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit uses an csi config map API exposed by Ceph-CSI.
This will reduce the efforts of keeping the configuration in
sync with Ceph-CSI.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
Some logging instructions use formatting syntax `%q`, but the logging method is
`Info` or `Debug` instead of `Debugf` and `Infof`. As a result, the arguments of
the method were concatenated instead of formatted properly.
Signed-off-by: Lucas Henry <polyedre@disroot.org>
When msgr2 is required, ensure the mon endpoints passed to
the csi configmap are on port 3300. The mons will be
listening on both 6789 and 3300. Existing volumes can
continue using port 6789 while new volumes will use
port 3300.
Signed-off-by: travisn <tnielsen@redhat.com>
Oded Viner
subhamkrai
Travis Nielsen
Peter Razumovsky
Joshua Hoblitt
subham rai
Artem Torubarov
parth-gr
Santosh Pillai
Blaine Gardner
parth-gr
Madhu Rajanna
NymanRobin
Praveen M
Rakshith R
Lucas Henry