This change continues an effort started earlier to make some
make targets and ci workflows more consistent and systematic.
see https://github.com/rook/rook/pull/14922
it adds a make target gen.helm-docs as an alias to helm-docs.
Additionally, gen.docs is added as alias to docs.
targets check.docs and check.helm-docs are removed because it was agreed
that targets using git are of little value to developers.
Their functionality is moved back into the corresponding docs workflow.
xiFinally, the redundant "Check helm-docs" check is removed from the
docs-check workflow
Signed-off-by: Michael Adam <obnox@samba.org>
Many of the canary tests have been failing much more
frequently in the past week or two. The test is typically
timing out pulling the image from quay.ceph.io since
it does not have as high bandwidth for the images.
A check is added to the test to wait specifically for the
first mon so it waits sufficiently for the image pull
before checking for other ceph daemons.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With the release of K8s 1.32, we update the CI and docs
to support this new release, to maintain the most recent
six releases of K8s.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Finish the process of deprecating holder pods by removing Rook's ability
to deploy them. The intent of this change is to make the most
superficial changes possible to accomplish this. There are still
remnants of code in Rook (particularly the CSI controller) that helped
configure or deploy holder pods. Due to the risk of breaking some
features, cleanup work of hose remnants will be deferred for future
work.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This acceptance test demonstrates the creation of two CephObjectStore(s)
that share the same pool(s) manually managed by CephBlockPool(s).
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
This removes the execution of `sudo lsblk` three times for every single
invocation of the script. Usage of the BLOCK var is replaced with
functions which memoize the result of probing for block devices.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Factor out most of the CRs used by various canary tests to a new
deploy_cluster_full_of_cruft_please_stop_using_this() function.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Fix OSD isn't up.
As sdb device might change to vdb in the runner, let
find_extra_block_dev() exclude the nbd devices and find the proper
extra device for OSD.
Clean up the nbd devices after the test job is running.
Fix logs artifact upload twice and collect logs before clean up.
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
this commit upgrade the minikube, k8s, crictl versions
in CI and also fix permission error in the github runner.
Signed-off-by: subhamkrai <srai@redhat.com>
This reworks the docs-check ci workflow in several ways:
* It renames the make target 'check-docs' to the more systematic 'check.docs'.
* It adds a 'docs'mode to the files validation script, and uses the script in `make check.docs`.
Overall, the workflow and local make targets are more systematic and
consistent with this change.
Signed-off-by: Michael Adam <obnox@samba.org>
The default service account isn't passed to the multus validation test
when no config file is used. Fix this.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
The docker.io image prefix is expected to be prepended
to the image names in the test images. This was missed
in 14550 related to some CI tests, which was now causing
the CI failures in the 1.15 branch where the search and
replace was missing the new docker.io prefix.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 3045076db8)
Ceph image no longer has `ip` tool installed. Use a different container
image for the daemonset which sets host IPs and routes for multus hosts.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
For the specification see:
<https://github.com/rook/rook/blob/master/design/ceph/object/swift-and-keystone-integration.md>
* extend the API object specs for swift and keystone integration
* adapt rgw to the new go-ceph version
- The parameter lists of the API call have changes, as parameters
ignored by the RGW Admin Ops API are no longer serialized, therefore
the mock has to be adapted.
- There is now validation for the user keys that are passed to the
User get API, therefore things failed when we had empty keys in our
User proxy object.
* expand the reconcile loop for the swift and keystone integration
* fix minor mistakes in design document
* add env var to pass extra args to minikube
Minikube decides CPU cores and memory automatically based on the
available resources on the machine which may be insufficient to
run rook. This commit adds an environment variable to add arbitrary
arguments to the minikube command, so both can be specified if
desired.
* integration tests for swift and keystone
The new integration of swift or s3 and keystone support by rook
does not have any integration tests yet.
This commit introduces integration tests for swift and keystone. The
tests are done against a minimal keystone setup (keystone container
image from Yaook-project (https://yaook.cloud), sqlite as database
backend, cert-manager and trust-manager for test certificate setup).
To prevent hardcoded credentials, passwords are generated
by the tests. The integration tests use the openstack client
(keystone- and swift-functionality) (https://docs.openstack.org/
python-openstackclient/ latest/). This was a concious design decision
to use client tooling as close as possible to the end user instead of
using other go-libraries (such as gophercloud).
* add documentation on swift and keystone
Currently there is no documentation on the use of Swift to access
an object store as well as the use of OpenStack keystone for
authentication.
This commit adds documentation on the use of Swift and OpenStack
keystone, as well as CRD-related documentation and an example setup.
* add integration tests for S3 via keystone
This commit introduces integration tests for s3 and keystone. The
tests are run against the same minimal keystone setup that the tests
for swift and keystone use.
The integration tests use the aws s3 client to use client tooling as
close as possible to the end user instead of using other go-libraries.
Co-authored-by: Jan Klippel <jan.klippel@uhurutec.com>
Co-authored-by: Silvio Ankermann <silvio.ankermann@cloudandheat.com>
Signed-off-by: Sebastian Riese <sebastian.riese@cloudandheat.com>
Signed-off-by: Jan Klippel <jan.klippel@uhurutec.com>
Signed-off-by: Silvio Ankermann <silvio.ankermann@cloudandheat.com>
In order to help users check that they have implemented the newly-added
Multus host configuration prerequisites, add a check to the validation
tool to verify connectivity.
Because users who are already running clusters with Multus enabled, add
a flag that allows users to only check for host configuration
prerequisites. This mode will not start the large number of clients that
would normally be started because those clients could disrupt a running
Rook cluster negatively.
Host checking pods require host network access. Many Kubernetes
distributions have pod security features enabled. In order to allow
non-Vanilla distros to run this tool, allow specifying a service account
that pods will run as, which can be configured by the admin to allow
test pods.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Add IPv6 support for multus validation tool. Also test that IPv6 support
works by specifying one of the NetAttachDefs with an IPv6 address range.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
mkdocs uses a markdown renderer that is hardcoded to 4 spaces per tab
for detecting indentation levels, including ordered- and
unordered-lists. Since we cannot easily change the renderer, begin using
a markdown linter in CI that will fail if official docs do not adhere to
the spacing rules.
As a starting point, the markdownlint config does not begin with the
default set of checks, which might overwhelm attempts to fix them.
Instead, focus on list-tab-spacing rules and a few other highly useful
checks.
markdownlint also has some gaps in its abilities that allow common Rook
doc issues to pass acceptance. However, it allows creating custom
linting plugins. Create 2 such linting plugins to check 2 things:
- all doc lines (except code blocks) must be aligned to a 4-space
boundary, without exception. This ensures that markdown will render
correctly with mkdocs. This unfortunately makes it possible to create
lists that are internally aligned strangely.
- admonitions must all follow the same format of
```
!!! header
body
```
For the strange lists, this is allowed and renders correctly, but it
looks strange:
```md
- first bullet
- second bullet
still second bullet
- third bullet
has a paragraph
of text inside
- last bullet
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Until now, an object store would create all the necessary
metadata pools and the data pool that were exclusively
for its own object store. When isolation between object
stores is necessary, this would cause many pools and
PGs to be created in the cluster, which was not
manageable.
Now one set of pools can be created to be shared
by any number of object stores. The metadata and data
between each object store is isolated by
RADOS namespaces, which by design will keep the
data safe for multi-tenancy.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For nightly jobs, canary tests are all running with the same job IDs,
making the last-run jobs cancel previous runs. Add a workflow-id
parameter to canary jobs that can be used to give each job in a canary
suite a unique job ID to prevent this.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
upgrading minimum kubernetes supported version to v1.24.17
and also upgrading other kubernetes version to their latest
respective version.
Signed-off-by: subhamkrai <srai@redhat.com>
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
The 'extra' block device attached to GH actions runners has changed size
twice in 3 months. The previous strategy of detecting the disk by size
is becoming harder to maintain. Additionally, the block size with recent
changes (75G) is now the same as the boot device (also 75G), making the
method inexact.
The method can now be summarized as, "find the boot disk and choose the
disk that isn't the boot disk to be the 'extra' one used."
Prior to this, we used a one-liner based on `lsblk`. While we could
still make this a one-liner, the method is now updated to 2 effective
lines, plus debug text output to stderr to help if we need to debug
further in the future.
Of note, the 'extra' disk has a mount point of "/mnt", but it is unclear
whether this is a reliable heuristic for detecting the extra disk. For
years now, GH action runners have had only 2 disks. Therefore, it seems
slightly more likely that a heuristic to "choose the non-boot disk" will
be a more robust long-term solution.
If this strategy proves to be unreliable in the future, it may be wise
to consider whether "the device with a partition mounted to '/mnt'"
would be a good alternative.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
the disk size in the github action machine has
increased from 64G to 75G. Now, we detech the version
automatically not fetching hard coded value.
Co-authored-by: Jan Klippel <jan.klippel@uhurutec.com>
Signed-off-by: subhamkrai <srai@redhat.com>
For now we are using the operator namespace name
as the prefix for the csi driver, This PR provides
an option for the users if someone wants to have
their own prefix for the csi driver, if someone tries
to change the prefix for existing csi driver rook
operator will fail to reconcile the csi driver.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
so far all the arguments were being handled as separate getopts
flags introducing a lot of boilerplate code for every new flag.
The new approach improves the arguments handling by using env
variables.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Use Quay as the source for the nginx-unprivileged image used for the
Multus validation tool because Quay does not rate limit image pulls,
which are a common complaint for users of the tool.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Joshua Hoblitt
Michael Adam
Travis Nielsen
Niels de Vos
Blaine Gardner
Praveen M
Xinliang Liu
subhamkrai
Madhu Rajanna
Sunnatillo
Liang Zheng
sp98
parth-gr
Redouane Kachach