This script includes bash features and will fail if sh is not a symlink to bash.
Signed-off-by: José Martínez <xose@google.com>
(cherry picked from commit e421623fd0)
fixes a nil pointer dereference in GetProbeWithDefaults when
startupProbe is set in cephfilesystem and currentProbe is nil.
adds panic recovery in cephfilesystem reconcile loop to improve
error visibility and avoid silent reconcile restarts.
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 51e9ddc3f5)
If the node for an OSD does not exist within kubernetes, the PDB
reconciliation logic will fail to make progress. This can be problematic
as new OSDs added to the cluster may not be protected by OSD PDBs after
they are added since the PDB reconcilation logic is failing.
The solution is to treat non existing OSD nodes as drained which is
logically consistent with treating unschedulable OSD nodes as drained as
you cannot schedule a pod onto a node which does not exist.
Fixes: #16086
Signed-off-by: Elias Carter <elias@dropbox.com>
(cherry picked from commit 5f2d6c01d7)
When a mon is failed over, the old mon is left in mon quorum
until the new quorum is confirmed in quorum. When host networking
is enabled, this may result in two mons being in quorum with the
same ip, if the new mon is scheduled on the same node as the
down mon. This results in daemon crashes in the cluster since
they are confused by multiple of the same ip in the mon map.
The solution is to avoid scaling down the bad mon when host networking
is enabled. This will ensure the new mon is not scheduled on the
same node as the previous mon. With host networking, either another
node is necessary or the original mon must come back online to
restore quorum.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit aa61ddb57e)
currently, we're setting the env `DISCOVER_DAEMON_UDEV_BLACKLIST`
in operator.yaml but we're not reading from the operator env and
setting the value to discover pod env.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 2742a707cc)
This change addresses a permission issue where mon pods crashloop
on some Kubernetes setups with SELinux enabled, even when
ROOK_HOSTPATH_REQUIRES_PRIVILEGED is set.
To resolve this, a new function makeMonSecurityContext() was introduced
to explicitly set runAsUser: 0 at the pod level for mon pods
when the environment variable ROOK_CEPH_MON_RUN_AS_ROOT is set to true.
Additionally, the function previously named PodSecurityContext() was renamed
to DefaultContainerSecurityContext() to avoid confusion between
container-level and pod-level security context configuration. All container
SecurityContext usages across Ceph daemons were updated to reflect this change.
This ensures the root user configuration is applied
automatically and consistently in environments where it is required
for mon pod startup, while preserving clear separation of container
and pod-level security logic.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
(cherry picked from commit 7f3e6bd7fa)
Added a flag in cephcluster CR CSI section
whether the user wants the Rook to manage
the csi users and secrets or create them on own.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 5094b1f5e6)
If RemoveSecret is set remove the secret.
if not set, do below
check if the current cephClient is owner if
secret is present, if not return as its owned
by other controller, if its not present create
or update the secret.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit d37297475e)
When cephClient CR is created by User, the Rook
is creating an User and creating an secret with
its own predefined name + CR name, With this we
are allowing user to specify the secretName
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit d6d2e604fc)
skip key generation during reconcile if CephObjectStoreUser is
being deleted to allow cleanup when referenced secret is missing
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 8249a28145)
The rados namespace status was not reporting if the namespace
was empty. Now the condition will be properly updated if
it is empty.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit b47f297608)
allow targetSizeRatio == 0
enforce targetSizeRatio >= 0 via +kubebuilder:validation
set targetSizeRatio and compressionMode="" if unset
remove IsTargetRatioEnabled() and IsCompressionEnabled()
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit dd65dc15d8)
change logger.info to logger.infof to correctly print
radosnamespace name and namespace
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 41d6baf0e1)
Allow force creation of OSD on a device previously configured in a different ceph cluster.
The OSD prepare pod job will zap the OSD disk using ceph-volume lvm zap
if that disk has metadata from a different ceph cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit 2bcf196b15)
currently it was using two tabs, but
others config are using one tab
So update the config to use one tag
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 58eb75b13b)
Labels cannot be longer than 64 characters, and if the image name
is too long we log a verbose message about the label that we can
just log now as debug level.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 57585ba151)
currently nfs is used as the unique selector
for daemon id, which returns nfs: ocs-storagecluster-cephnfs-a
Updating the has() to function to check the same label value
(n.Name + "-" + id)
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 79f44a4660)
this commit remove the code which sets the dmcrypt encryption
key from secret as environment variable in the prepare pod job
spec. Now, the env will be set under function `setKEKinEnv`, which
tries to reads secret from k8s first method `c.IsK8s()`under
`GetSecret` and then check for KMS to ready and apply env directly.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit d86aa28f30)
This change adds support for skipping reconciliation of CephNFS daemons
that are labeled with `ceph.rook.io/skip-reconcile=true`.
Similar to MDS, MGR, and RGW components, this allows cluster operators
to prevent Rook from modifying specific NFS daemon deployments.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
(cherry picked from commit 612e54e1ae)
when a reconcile returns a requeue result without an error
(e.g. due to a missing cephcluster), the previous logic reported
it as a successful reconcile. this was misleading and made it
hard to understand the actual controller behavior this
change adds a new condition to log and emit a "requeuing" event
when reconcileResponse.Requeue is true and err is nil.
this ensures more accurate event reporting and improves observability across
all controllers using reportreconcileresult.
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 83ce9a6a63)
This PR sets CSI_ENABLE_METADATA to true by default in the
Rook configuration, ensuring that the --setmetadata=true
flag is added to CSI nodeplugin pods
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit ce59c72eb1)
The Kubernetes CSI sidecars have had several releases that were not
included in deployments by Rook yet, update them to the versions that
are available today:
- csi-attacher:v4.8.1
- csi-provisioner:v5.2.0
- csi-resizer:v1.13.2
- csi-snapshotter:v8.2.1
This change is important, because Ceph-CSI will implement the new
Controller.GetSnapshot CSI procedure. A bug in csi-lib-utils causes a
panic when a ControllerCapability is provided, but not (yet) known to
the CSI sidecars. The updated sidecars consume a version of
csi-lib-utils with a fix for that panic.
See-also: kubernetes-csi/csi-lib-utils#188
Signed-off-by: Niels de Vos <ndevos@ibm.com>
(cherry picked from commit a168c40008)
there can be a scenario where a new RNS CR is created with
the same spec.blockPoolName and spec.name, in that case we want to delete
the old RNS CR without checking dependent child resources.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit ebc1671ab7)
there can be a scenario where a new svg cr is created with
the same svg.filesystem and svg.spec.name, in that case we want to delete
the old svg CR without checking dependent child resources.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 1ef660f749)
When monitoring is enabled, if the service monitor fails
creation, the reconcile will fail and rook will never
create the OSDs. A number of users have been blocked during
install due to this issue. Let's allow reconcile of the
full cluster even in this error case. After they install
prometheus, they would then need to trigger a reconcile again
perhaps by restarting the rook operator to enable
the service monitor.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit ca12916438)
With a osd resize operation, currently pvc and pv may
takes more time then expected.
And so the osd dont get resized and need manual re-start
as currently we don't have a watch on osd's
controller that watches pv and get it resized.
add a wait time till pvc is not resized
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 94450c0db7)
When multiple `CephObjectStoreUser` CRs are present, the operator logs a
high volume of `CephObjectStore "foo" found` messages during reconcile.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit f1fad531eb)
When a rados namespace is deleted, it cannot be purged
until its images and snapshots are deleted. Now a condition
is being added to the rados namespace CR status so the user
does not need to read the operator log to discover the cause.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 530223c5b4)
When the blockpool is deleted and there are images or
snapshots in the pool, the deletion is blocked by the
finalizer until they are all removed. The condition added
to the cephblockpool status only indicated if there were
radosnamespace dependencies. A new condition is now added
to describe if there are images or snapshots.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 0a3a599580)
ceph-csi uses an exclusive lock for cryptfs operations. This needs the x capability on the metadata pool.
Fixes#15283
Signed-off-by: Felix Prasse <1330854+flx5@users.noreply.github.com>
(cherry picked from commit 8f53522162)
Named containerPort is a useful feature when generating dynamic scrape
targets with prometheus.
This makes it clear that the containerPort is intended for metrics
scraping.
The name matches that which is on the mgr deployment.
Signed-off-by: Justin Cichra <jcichra@cloudflare.com>
(cherry picked from commit 12c36e9472)
improving logging to include name and namespace of resource
and also namespace should not end with period.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit fe776fd4fe)
Adds .spec.cephConfigFromSecret to CephCluster for loading
Ceph config parameters from a Kubernetes Secret.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
(cherry picked from commit 45b0ef2104)
Lower the verbosity of a message in the notification controller's OBC
label watcher. If the OBC controller is having issues provisioning the
OBC, this log will spam every 10 seconds. Reduce the message verbosity
level to debug.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 08233d5b6d)
The object store controller was swallowing errors of the
type not found, assuming a certain category of errors
when ceph may still be initializing. But some of these
errors could be user error and they need to troubleshoot
the details of the error, so we need to log the specific
error instead of swallowing it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 95a5920bef)