The rados namespace status was not reporting if the namespace
was empty. Now the condition will be properly updated if
it is empty.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit b47f297608)
change logger.info to logger.infof to correctly print
radosnamespace name and namespace
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 41d6baf0e1)
there can be a scenario where a new RNS CR is created with
the same spec.blockPoolName and spec.name, in that case we want to delete
the old RNS CR without checking dependent child resources.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit ebc1671ab7)
When a rados namespace is deleted, it cannot be purged
until its images and snapshots are deleted. Now a condition
is being added to the rados namespace CR status so the user
does not need to read the operator log to discover the cause.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 530223c5b4)
improving logging to include name and namespace of resource
and also namespace should not end with period.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit fe776fd4fe)
When finalizers are added to the CRs, a follow-up reconcile
will be triggered due to the increased generation on the CR.
Therefore, abort the initial reconcile when adding the finalizer,
and allow the follow-up reconcile to complete the configuration.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit f7fb1bc0f2)
All existing controller runtime watches are converted to use "typed"
handlers and predicates instead of operating on `client.Object`. The
intent is to be bug for bug equivalent with the existing logic while
replacing run time type assertions and switch statements with compile
time type constraints and type casts. In several cases, functions using
assertions were split up such that each function only handles a single
Kind at a time. It is hoped that this will improve readability and
maintainability while facilitating future refactoring such as migrating
some watches to using IndexFields.
Of particular note is that the massive switch statement in
`WatchControllerPredicate()` from
`pkg/operator/ceph/controller/predicate.go` has been replaced with
generics, reflection, and splitting the obc logic into its own predicate
function. There are still many helper functions operating on
`client.Object`. These were not updated unless required by the compiler
in order to limit the size of this change. The type safety of these
funcs should be improved as followup work.
It is strongly suggested that going forward, handlers and predicates
only handle a single Kind (generic or not) and that switches / type
assertions are heavily discouraged or forbidden. This PR removed all
but a single switch statement in a predicate, which should be addressed
in future work.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit 9f1ed201db)
this commit add support for mirroring b/w implicit rados namespace and
defined rados namespace. To support this, rook will treat `<implicit>`
name on cephblockpool as `""` empty string. This will allow mirroring
b/w implicit and defined radosnamespace.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 420178fe3e)
today, csi operator cephConnection and client profile
CR's where not getting created in external mode. So, let's
start creating those.
Signed-off-by: subhamkrai <srai@redhat.com>
Implements #14733. Allows to set IDs of external mons to
Cluster CRD. Rook will not remove external mons from quorum
and will add external mon addresses to mon endpoints.
Use-case for external mon is to maintain quorum for 2-AZ
k8s cluster in case of zone outage.
Signed-off-by: Artem Torubarov <artem.torubarov@clyso.com>
in external mode deployments ceph iamge is not provided
and job keeps on failing to get the cephversion
fix by checking if ceph iamge is available
Signed-off-by: parth-gr <partharora1010@gmail.com>
Finish the process of deprecating holder pods by removing Rook's ability
to deploy them. The intent of this change is to make the most
superficial changes possible to accomplish this. There are still
remnants of code in Rook (particularly the CSI controller) that helped
configure or deploy holder pods. Due to the risk of breaking some
features, cleanup work of hose remnants will be deferred for future
work.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Modify the CR to allow mirroring of an rados namespace
to a differently named namespace on the remote cluster
1) enable rados namesapce mirroring only
if the blockpool mirrroing is enabled
2) disable blockpool mirroing only if
all the namesapce mirroing is disabled
if the rbd mirroring fails and ceph version is not supported
provide a error message with supported version details
and reason of failing
Signed-off-by: parth-gr <partharora1010@gmail.com>
Someone testing the Multus holder pod removal feature encountered an
issue where the migration process failed to lead to a system state where
PVCs could be created successfully.
The root cause was found to be a ceph csi config map wherein the primary
CephCluster entry was lacking a value for the "namespace" field.
I observed this once in my development on the holder pod removal
feature, but I was unable to reproduce and assumed it was my own error.
Since this has been seen in a user environment, it must be that the
error is a race condition, and I am unable to determine the exact source
of the bug.
I do not believe this bug would be present if the code that updates the
CSI configmap were properly idempotent, but it has many conditions based
on prior states, and I was unable to determine how to resolve this
underlying impelementation pattern issue.
Instead, I opted to separate the `clusterKey` parameter into two clear
parts:
1. `clusterID` for when `clusterKey` is used as an analogue for
`clusterID`
2. `clusterNamespace` for when `clusterKey` is used as an analogue for
`clusterNamespace`
I added unit tests to ensure that SaveClusterConfig() will be able to
detect when the namespace is currently missing, and using the new
`clusterNamespace` field, it should always know what value to use as
input when correcting the bug in already-installed systems.
I also verified that this update works when the function simultaneously
removes netNamespaceFilePath entries, and that those entries are removed
properly.
Finally, manual testing also verifies the change.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Corrected the NetNamespaceFilePath generation in the
subvolumegroup & radosnamespace controller by replacing
the cephCluster.Name with cephCluster.Namespace.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit uses an csi config map API exposed by Ceph-CSI.
This will reduce the efforts of keeping the configuration in
sync with Ceph-CSI.
Signed-off-by: Praveen M <m.praveen@ibm.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
Some logging instructions use formatting syntax `%q`, but the logging method is
`Info` or `Debug` instead of `Debugf` and `Infof`. As a result, the arguments of
the method were concatenated instead of formatted properly.
Signed-off-by: Lucas Henry <polyedre@disroot.org>
When msgr2 is required, ensure the mon endpoints passed to
the csi configmap are on port 3300. The mons will be
listening on both 6789 and 3300. Existing volumes can
continue using port 6789 while new volumes will use
port 3300.
Signed-off-by: travisn <tnielsen@redhat.com>
if Multus is enabled the clusterinfo should be updated with
network as multus as to run the ceph cmds in remote
executor
Signed-off-by: parth-gr <paarora@redhat.com>
The cephcluster.ClusterName is no longer available in the k8s api
with the ObjectMeta type, so we use the cephcluster.Name
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CSI package needs to load clusterInfo, today this code is in the mon
package which makes the call of LoadClusterInfo impossible without
having a circular import.
Signed-off-by: Sébastien Han <seb@redhat.com>
If a mon is added or removed in a ceph
cluster all the CSI clusterID's belongs
to the ceph cluster should also gets updated.
Added a new cluster identifier to the csi configmap,
i.e ceph clusterNamespace which helps to identify
the clusterID's belongs to that ceph cluster.
Note:- to support the upgraded clusters,we
can ask users to update the mon IP's for the
problamatic clusterID as it wont be updated
by the operator.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This introduces a new CRD to add the ability
to create rados namespace for a given
ceph block pool. Typically the name of the pool
is the name of the blockpool created by rook.
Closes: #7035
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Travis Nielsen
Oded Viner
subhamkrai
Joshua Hoblitt
subham rai
Artem Torubarov
parth-gr
parth-gr
Blaine Gardner
sp98
Praveen M
Rakshith R
Lucas Henry
Sébastien Han
Madhu Rajanna