Previously, shouldFailoverMonImmediately() was called only when a mon first went out of quorum. If the node gets deleted after the timeout starts, it does not get detected until the timeout expires. Moved the call outside the timeout initialization block so it runs on every health check iteration and detects node deletion immediately.
Fixes#15953
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
Going forward, admin will manage the csi operator
CR's and rook will only manage Ceph Connection cr
and client Profile cr.
The old csi driver is completely removed from Rook
and can no longer be used starting in Rook v1.20.
The upgrade guide will contain the needed transition steps
for managing the csi operator settings.
Signed-off-by: subhamkrai <srai@redhat.com>
Ceph relaxed the stretch mode CRUSH weight check in ceph/ceph#66580 to
allow weights within 10 percent of each other. This change is available
in Ceph Umbrella and was backported to tentacle v20.2.2 via ceph/ceph
number 67790. The squid backport is still pending.
Signed-off-by: Lumir Sliva <61183145+lumir-sliva@users.noreply.github.com>
The mon PDB was previously only being adjusted
during mon failover, where the maxunavailable was set to 0
before failover, then reset to 1 after failover. This allowed
for a race condition where one mon had been drained and is
not fully back in quorum before the next mon is allowed to drain.
This is now prevented by disallowing drains until a mon
is fully back in quorum. Anytime a mon falls out of quorum,
the mon pdb will be adjusted to prevent further drains
from causing a mon quorum outage.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
for tnf, adding initial api changes and implementation for floating mon.
The current pr follow embeded yaml approach for creating floating mon
deploymen instead of configmap approach.
Signed-off-by: subhamkrai <srai@redhat.com>
The do-not-reconcile label on the mon deployments was
causing the mon reconcile to be skipped for all mons,
even if the label was only on a single mon. Now, the
skipping of reconcile will only be scoped to a single
mon.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When writing to the operator log, where possible
the namespace of the resource on which the operator
is working will be logged as a standard prefix
to more easily troubleshoot what resource is being reconciled
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
`cluster.monitoringRoutines` stores three types of
daemon health: "mon", "osd", and "status". These are
used by three goroutines respectively, resulting in:
fatal error: concurrent map reads and map writes.
Signed-off-by: Yite Gu <guyite@bytedance.com>
Wait for the mon-canary pods to be terminated before starting the actual
mons. When topology spread constraints are added to evenly spread the
mons, then pod-anti affinity does not allow mons to be created on the
same node where other mons are running, this also includes the
mon-canary pods. We delete the mon-canary pods and then start the actual
mon pods. Sometimes the termination of the canary pods might take more
time, so schedular won't schedular mon pods on that node.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The mon canary should quickly shut down after the pod is
deleted, since it has no purpose to continue running.
Since the sleep does not catch the SIGTERM as pid 1,
use a bash trap to exit quickly.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
shouldFailoverMonImmediately has a nil pointer exception with mons on
PVC. Rook-ceph-mon-endpoint does not store node information of the mons
on PVC. So `mapping.Hostname` throws nill pointer
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Implement CephX key rotation for Rook's client.admin user.
Admin user rotation is risky, so this has been tested extensively both
in unit tests as well as by manually injecting failures during runtime.
In testing, all failures were able to be recovered by the recovery
routine.
A mutex is also added to help ensure that two simultaneous admin key
rotation processes cannot be running simultaneously for any given
namespace. The mutex is tested in unit tests, and it was verified during
runtime via manual testing.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Allow Rook to rotate CephX keys for Ceph v19.2.3 and up with the
exception of Ceph mons. While v19.2.3 has the `ceph auth rotate` command
that Rook needs to perform key rotation, there is still ongoing work in
Ceph to change how the `mon.` key is tracked internally. Rook's mon key
rotation requires those currently-unreleased Ceph changes.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Cleanup up overall usage of CephX statuses in CephCluster.
Convert all CephX statuses to non-pointer types. There is no specific
need for pointer types, and keeping these as non-pointers means there is
not a risk of nil pointer exceptions in all the various Rook controllers
for upgraded clusters.
Move initialization of CephCluster CephX status items to
`preMonStartupActions()`. This helps resolve 2 issues:
1. 'Uninitialized' state was being set for external CephClusters where
CephX statuses are not relevant.
2. 'Uninitialized' state was being set for upgraded clusters whose key
status cannot be determined.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
rotate the client.rbd-mirror-peer key based on the cephxconfig.
Also update the cephxStatus in the cephcluster as well as the
mirrored cephblockpool.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
CephConnection CR is created with the
kubernetes namespace name as its the
unique name in the entire cluster.
This PR removes unwanted input
parameters and adjust the namespace
name for the cephConnection CR.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
During mon failover, if a mon is assigned to a node
but the node does not exist, the mon should be failed
over immediately instead of waiting for a 10 or 20
minute timeout. If the node does not exist, the mon pod
will be in a pending state until the failover is finally
triggered, and no point in waiting that long if the
node is gone.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When a mon is failed over, the old mon is left in mon quorum
until the new quorum is confirmed in quorum. When host networking
is enabled, this may result in two mons being in quorum with the
same ip, if the new mon is scheduled on the same node as the
down mon. This results in daemon crashes in the cluster since
they are confused by multiple of the same ip in the mon map.
The solution is to avoid scaling down the bad mon when host networking
is enabled. This will ensure the new mon is not scheduled on the
same node as the previous mon. With host networking, either another
node is necessary or the original mon must come back online to
restore quorum.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This change addresses a permission issue where mon pods crashloop
on some Kubernetes setups with SELinux enabled, even when
ROOK_HOSTPATH_REQUIRES_PRIVILEGED is set.
To resolve this, a new function makeMonSecurityContext() was introduced
to explicitly set runAsUser: 0 at the pod level for mon pods
when the environment variable ROOK_CEPH_MON_RUN_AS_ROOT is set to true.
Additionally, the function previously named PodSecurityContext() was renamed
to DefaultContainerSecurityContext() to avoid confusion between
container-level and pod-level security context configuration. All container
SecurityContext usages across Ceph daemons were updated to reflect this change.
This ensures the root user configuration is applied
automatically and consistently in environments where it is required
for mon pod startup, while preserving clear separation of container
and pod-level security logic.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
This is the first implementation of CephX key rotation in Rook.
Adds key rotation API from design PR 15915.
Also add helper methods for rotating keys, determining when keys
need to be rotated, and for generating CephX key statuses. These will be
reusable for other Rook reconciles beyond object/RGW.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This change cleans up and standardizes import statements across the Ceph operator code. It removes redundant or duplicate imports and reorganizes alias names for improved clarity and consistency. Additionally, the ST1019 exception was removed from .golangci.yaml now that the code complies with the rule.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
With a osd resize operation, currently pvc and pv may
takes more time then expected.
And so the osd dont get resized and need manual re-start
as currently we don't have a watch on osd's
controller that watches pv and get it resized.
add a wait time till pvc is not resized
Signed-off-by: parth-gr <partharora1010@gmail.com>
In case of multicluster service, we need to always delete the mon-canary
pods even if there is any failure while exporting the service, else
multiple mon canary pods will get created.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
All existing controller runtime watches are converted to use "typed"
handlers and predicates instead of operating on `client.Object`. The
intent is to be bug for bug equivalent with the existing logic while
replacing run time type assertions and switch statements with compile
time type constraints and type casts. In several cases, functions using
assertions were split up such that each function only handles a single
Kind at a time. It is hoped that this will improve readability and
maintainability while facilitating future refactoring such as migrating
some watches to using IndexFields.
Of particular note is that the massive switch statement in
`WatchControllerPredicate()` from
`pkg/operator/ceph/controller/predicate.go` has been replaced with
generics, reflection, and splitting the obc logic into its own predicate
function. There are still many helper functions operating on
`client.Object`. These were not updated unless required by the compiler
in order to limit the size of this change. The type safety of these
funcs should be improved as followup work.
It is strongly suggested that going forward, handlers and predicates
only handle a single Kind (generic or not) and that switches / type
assertions are heavily discouraged or forbidden. This PR removed all
but a single switch statement in a predicate, which should be addressed
in future work.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
The change creates and manages an Endpoints resource
with the current Ceph monitor (mon) IPs, allowing
clients to resolve mon IPs via DNS without relying
on the rook-ceph-mon-endpoints ConfigMap.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
Implements #14733. Allows to set IDs of external mons to
Cluster CRD. Rook will not remove external mons from quorum
and will add external mon addresses to mon endpoints.
Use-case for external mon is to maintain quorum for 2-AZ
k8s cluster in case of zone outage.
Signed-off-by: Artem Torubarov <artem.torubarov@clyso.com>
There is a race condition in ceph v19 at startup of a
stretch cluster where if the .mgr pool is created by
the mgr pod after stretch mode is entered, the
devicehealth mgr module will crash and cause a
ceph HEALTH_ERR. The error then causes rook reconcile
of all CRs to be skipped because Rook is assuming
admin intervention is needed to continue. The fix
is to wait until the .mgr pool is created by the mgr
pod before entering stretch mode.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ci was using a pretty old version og golangci-lint.
This updates to the latest version.
Additionally, it silences some
gosec integer conversion overflow false positves
and fixes some real errors of this category
and string format errors found by golangci-lint, while at it.
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Previously arbiter monitors were allowed to failover in supported versions
of Ceph. This behaviour regressed. Since all supported versions of Ceph now
support this, we no longer need to check this at all.
Signed-off-by: Grant Fleming <gfleming@evroc.com>
The mon canaries may be created even when the mon daemons
are not created thereafter during the integration tests.
Therefore, the integration tests need to also query a label
specific to the mon daemon so the canaries are not a distraction
to the test.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Resolves CIS benchmark rule 5.7.3, Pods part. SecurityContext
should be explicitly defined in pod level of Pod spec section.
It is sufficient to specify empty securityContext to satisfy
CIS 5.7.3 rule.
5.7.3 Apply Security Context to Your Pods and Containers
When designing your containers and pods, make sure
that you configure the security context for your pods,
containers, and volumes.
Signed-off-by: Peter Razumovsky <prazumovsky@mirantis.com>
If the mon failover is in progress, ensure the removal
of an extra mon deployment is skipped since that code
path only has one mon in the list for the mon that was
just newly started. The extra mon was erroneously removing
a random mon in that case, followed immediately by the mon
failover completing and removing the expected failed mon,
and potentially causing mon quroum loss.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Given that Ceph Quincy (v17) is past end of life,
remove Quincy from the supported Ceph versions,
examples, and documentation.
Supported versions now include only Reef and Squid.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This adds an operator config setting ROOK_REVISION_HISTORY_LIMIT
defaulting to kubernetes'value for RevisionHistoryLimit.
If configured, the provided value will be used as RevisionHistoryLimit
for all Deployments rook creates.
Fixes: #12722
Signed-off-by: Michael Adam <obnox@samba.org>
When removing a mon from quorum, there is a race condition that
can result in mon quorum going being lost at least temporarily.
The mon pod was being deleted first, and then the mon removed
from quorum. If any other mon went down between the time the
pod of the bad mon was deleted and when the mon was removed from
quorum, there may not be sufficient quorum to complete the
action of removing the mon from quorum and the operator would
be stuck.
For example, there could be 4 mons temporarily due to timing
of upgrading K8s nodes where mons may be taken down for some
number of minutes. Say a new mon is started while the down
mon also comes back up. Now the operator sees it can remove
the 4th mon from quorum, so it starts to remove it. Now say
another mon goes down on another node that is being updated
or otherwise drained. Since the 4th mon pod was deleted
and another mon is down, there are only two mons remaining
in quorum, but 3 mons are required in quorum when there
are 4 mons. Therefore, the quorum is stuck until the
third mon comes back up.
The solution is to first remove the extra mon from quorum
before taking down the mon pod.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Previously, Rook would fail to create monitors for a `CephCluster` spec that
required them to be located in distinct failure domains:
```yaml
spec:
mon:
count: 3
failureDomainLabel: topology.kubernetes.io/zone
zones:
- eu-central-1a
- eu-central-1b
- eu-central-1c
```
This was due to the fact that Rook was mistakenly getting the
`failureDomainLabel` from `spec.mon.stretchCluster.failureDomainLabel`.
This commit ensures `spec.mon.failureDomainLabel` is being used instead, which
fixes the cluster deployment for the spec above.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
adding code changes,rbac changes required for create the new
Ceph-CSI operator CR named cephCluster in api group 'csi.ceph.io'.
Signed-off-by: subhamkrai <srai@redhat.com>
For an advanced network configuration, the mon endpoints
expected for the ceph public network may be different from
the public IP address that is set on the K8s node. When
host networking is enabled in rook, the IP address of the
node was only allowed previously. Now, the IP address
used for a mon when scheduled on a node can be determined
by setting an annotation on each node where mons can run:
network.rook.io/mon-ip: <ip-address>
This annotation must be set before the mons are created.
Mon endpoints cannot be changed after they are already
running.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When IPv6-only network mode is enabled and when mons are configured to
listen only on msgrV2 port, Rook has to add the port to the mon
--public-bind-addr in order to force mons to stop listening on the
msgrV1 port. This can cause problems for IPv6 clusters where adding
':<port>' to the end of an IP addr looks like a valid IPv6 address.
In IPv6 mode, Rook needs to set this to '[<ip>]:<port>' with the
brackets to be a non-ambiguous IPv6 address.
In IPv4 mode, Rook needs to keep its existing behavior. IPv4 mode should
also continue to be the defualt assumption if the network config isn't
specified.
If 'dualStack: true' is specified, Rook is informed that the environment
is dual stack, but Rook doesn't know which IP family to expect from the
pod IP. In this scenario, it is safest for Rook not to apply the port,
since assuming either IPv4 or IPv6 format could be incorrect. In this
scenario, mons may still listen on msgrV1 ports, but this is preferable
to an environment where mons perpetually crash.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>