Updating the cephcsi image to 3.10.2
which is the latest released one.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit c22597a32c)
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
(cherry picked from commit ee05e82cea)
When CPU requests and limits are assigned to a pod,
the pod will be guaranteed the requests, up to the limits.
Even if there are spare CPU cycles, the pod cannot use
them. Thus, pods can be unnecessarily denied compute
when they need to burst if the limits are set.
Therefore, it is not recommended to set CPU limits
since the CPU requests are already guaranteeing that
no pod will be starved at least for its requests.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 27265ff279)
For now we are using the operator namespace name
as the prefix for the csi driver, This PR provides
an option for the users if someone wants to have
their own prefix for the csi driver, if someone tries
to change the prefix for existing csi driver rook
operator will fail to reconcile the csi driver.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit c35a8532aa)
The operator needs to burst significantly when reconciling,
then will quiet down and nearly not consume any cpu.
Therefore, we allow the operator to burst to more than
a full cpu instead of limiting it to a half cpu.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit ca28887403)
The pg_autoscaler mgr module is no longer possible to disable.
Ceph requires the module to always be enabled. Now the
autoscaling configuration is done with a per-pool setting.
Now the rook module is shown as an example to enable.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit f0c30e2edb)
This commit adds the flexibility to configure
leader election flags as per the user
requirement and also keeps the existing values
as the default one.
resolve: #13475
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 9b418d24a1)
updating csi provisioner to 3.6.3 to
as we have a bug in 3.6.2
resolves: #13475
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 85b86efee1)
Since v18.2.1 is the default recommendation for the ceph version,
update all the docs and examples to that version.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 56a3370d83)
Allow changing spec.network.hostNetwork settings on a running cluster
by failing over the mons
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 42ea2897cf)
This commit documents the newly added `spec.csi`
section containing CSI driver related options.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 24430f989a)
Today, it's unclear that there is an expected order of operation when it
comes up upgrades. In reality, the `rook-ceph` helm chart includes the
operator, which should have the opportunity to update any custom
resources before the `rook-ceph-cluster` is upgraded.
Signed-off-by: Kyle Fazzari <kyrofa@ubuntu.com>
(cherry picked from commit ce6baa4f31)
Remove some lingering notes stating that features require Ceph Quincy.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 685a60ed76)
Update docs for the upcoming v1.13 release.
Ensure that the pending release doc has critical notes.
Ensure upgrade guide versions are updated and tested.
Clarify some minor documentation points regarding features present in pending release doc.
Special care has been taken to update notes and docs for removal of the admission controller, which may be confusing for the estimated-small number of acive users.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 06d18a7122)
This commit updates default cephcsi driver version
to v3.10.0 and filesystem reconciler now creates
csi subvolumegroup by default.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit a3220d827d)
In some cases, it's desired to use `must` than `should`.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
(cherry picked from commit 2059a04fbd)
Add the missing explanation of pgHealthCheckTimeout and pgHealthyRegex
in the CephCluster' CRD doc. In addition, remove a verbose sentence
from the explanation of `osdMaintenanceTimeout`.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
(cherry picked from commit ab1f1d97ac)
This implements the "Ceph Config via Ceph Cluster CRD" design document
as a `cephConfig:` structure on the CRD.
This also fixes the `yq` commands used to manipulate the
`cluster-test.yaml` that caused CI issues for this PR and potentially
unknowingly others.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
(cherry picked from commit 4ed35d6bd6)
This commits removes controller-runtime dependencies
from the apis dir and to achieve that we are removing
webhook.
Signed-off-by: subhamkrai <srai@redhat.com>
Originally we create it using this cmd
ceph fs subvolume create <vol_name> <subvol_name>
So we can have 2 variables filesystem and subvolume name,
Currently the CR doesn't allow us to make subvolume-name
as constant as needed to "csi" because of k8s limitations
Signed-off-by: parth-gr <paarora@redhat.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
change the json output of storageclass to also inclusde rados namespace,
and also added the changes in the csi secret
Signed-off-by: parth-gr <paarora@redhat.com>
This patch adds `pgHealthyRegex` field to DisruptionManagementSpec.
`pgHealthyRegex` is a regular expression that is used to determine which
PG states should be considered healthy. The default value of
`pgHealthyRegex` is:
^(active\+clean|active\+clean\+scrubbing|active\+clean\+scrubbing\+deep)$
which is effectively the same as before.
Signed-off-by: Ryotaro Banno <ryotaro.banno@gmail.com>
Allow end-user to have full control on NFS-Ganesha liveness probe:
- Disabled
- Enabled, using user-provided definition
- Enabled, using Rook's default liveness probe for Ganesha.
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
Madhu Rajanna
Liang Zheng
travisn
Joshua Hoblitt
parth-gr
mergify[bot]
Yuma Ogami
Riya Singhal
Niels de Vos
sp98
Rakshith R
Kyle Fazzari
parth-gr
Blaine Gardner
Satoru Takeuchi
Anthony D'Atri
Alexander Trost
subhamkrai
Ryotaro Banno
Praveen M
Shachar Sharon