The target_size_ratio moved under the parameters element of
the pool settings. While the target size ratio is still supported
under the previous location for backward compatibility, the
example is preferred under parameters.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
as we are moving from alpha to beta snapshot,
we need to cleanup alpha resources to have successful
upgrade
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
removed CSI_ENABLE_SNAPSHOTTER from the configuration
to enable or disable csi-snapshotter as snapshot
is moved to beta and enabled by default in kubernetes
1.17+
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
updated snapshotter from v1.x to v2.x
as its supports snapshot beta, the required
provisioner version to support snapshot beta
is v1.5.x+.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
ceph-csi will be deployed as statefulset if the kubernetes
version is less than 1.14, as snapshotter will work
with kube 1.17+, we dont need snapshotter sidecar
deployed as part of statefulset.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
in kubernetes 1.17+ the snapshot CRD is changes
we need to update snapshot yaml file as per new CRD
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Updated warning and critical alerts for all the PVC's created by rook-ceph provisioners. Added the recommendation to expand the PVCs.
Closes: BZ1849717
Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
Go's template language doesn't treat infix `and` as a short-circuit,
which led to fatal errors after an update in Go 1.14 surfaced that as
a fatal error. This commit removes the infix `and` and replaces it with
a default dict to handle the case of a missing Heml value.
Closes: https://github.com/rook/rook/issues/5378
Signed-off-by: Judson <nyarly@gmail.com>
adds deploy.sh script to deploy validatingwebhookconfiguration and create secrets.
adds new command ceph admission-controller to start webhook servers.
adds validation for various rook custom resources
Signed-off-by: Vineet Badrinath <vbadrina@redhat.com>
The tuning parameter of slow device is defined as "tuneDeviceClass".
However, it's written in the document as "tuneSlowDeviceClass".
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Added warning and critical alerts for all the PVC's created by rook-ceph provisioners. This is required to notify a admin timely to check on PVC utilization and take a required action to prevent workloads from failing.
Closes: BZ1849723
Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
Added a new critical alert CephClusterReadOnly which notifies when the cluster becomes read-only
Updated the warning and critical alert to accomodate the new alert
Closes: BZ1809248
Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
Since 1.3 will support both Nautilus and Octopus, let's use Octopus for
the base image. Newer images have retro-compatibility with older Ceph
versions.
Closes: https://github.com/rook/rook/issues/1765
Signed-off-by: Sébastien Han <seb@redhat.com>
Add Ceph CSV metadata for OKD platform.
This will allow to have a CSV compatible with OKD as the CSV should be different than both OCP (Red Hat supported) and k8s (missing some security definitions).
Signed-off-by: Diego Abelenda <diego.abelenda@gmail.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Newer versions of operator-sdk (since 0.15.0, released Jan 2020) have a different command line to generate CSV. Make changes to the script generating the CSV so that it works with these new versions.
Use the newer manifest format to be compatible with bundles in the future.
Signed-off-by: Diego Abelenda <diego.abelenda@gmail.com>
Now, we can not only cleanup monitor data, logs and crashes but the
disks too. As part of the cleanupPolicy CR spec, we have a new setting
called sanitizeDisks which holds more details:
* confirmation: the confirmation message to sanitize disks,
use "yes-really-sanitize-disks" to confirm
This will **only** wipe the metadata, so it's a fast cleanup allowing
you to re-install later but won't remove all the data from the drive.
Signed-off-by: Sébastien Han <seb@redhat.com>
On Octopus cluster, we don't use the host PID anymore to run OSD so
adding a reminder to remove it later.
Signed-off-by: Sébastien Han <seb@redhat.com>
* Clarify the helper for the run-as-user argument
* Add 2 new storage class and put the data so we stick with the same
pattern as the Secret and ConfigMap
Signed-off-by: Sébastien Han <seb@redhat.com>
taeuk_kim
Travis Nielsen
Ahmad Nurus S
Jiffin Tony Thottan
Sébastien Han
Madhu Rajanna
Anmol Sachan
Judson
Vineet Badrinath
Satoru Takeuchi
UMEZAWA Takeshi
Diego Abelenda
Ali Maredia
Arun Kumar Mohan