When pool placements were recently added to the object store CRD, it
seems that codegen didn't get run, and Rook's CI didn't accurately catch
the codegen issue. This will address adding the missing generated code.
Follow-up work will address fixing CI so that it doesn't continue
missing when codegen needs to be run.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
The crush rules may have a negative step num.
Rook had assumed negative values were not possible,
but just had not been encountered previously in
a custom crush rule.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
to keep it simple we'll not delete the csi-operator resources
we'll only document this for users who want to switch to csi-drivers.
Anyways by next release we'll only support csi-operator only.
Signed-off-by: subhamkrai <srai@redhat.com>
This new setting is of Boolean type and defaults to "false".
When set to "true", it changes the behavior of the
rook operator to
nable host network on all pods created by the cephcluster controller
new method to check the setting: opcontroller.EnForceHostNetwork()
Signed-off-by: Michael Adam <obnox@samba.org>
When removing a mon from quorum, there is a race condition that
can result in mon quorum going being lost at least temporarily.
The mon pod was being deleted first, and then the mon removed
from quorum. If any other mon went down between the time the
pod of the bad mon was deleted and when the mon was removed from
quorum, there may not be sufficient quorum to complete the
action of removing the mon from quorum and the operator would
be stuck.
For example, there could be 4 mons temporarily due to timing
of upgrading K8s nodes where mons may be taken down for some
number of minutes. Say a new mon is started while the down
mon also comes back up. Now the operator sees it can remove
the 4th mon from quorum, so it starts to remove it. Now say
another mon goes down on another node that is being updated
or otherwise drained. Since the 4th mon pod was deleted
and another mon is down, there are only two mons remaining
in quorum, but 3 mons are required in quorum when there
are 4 mons. Therefore, the quorum is stuck until the
third mon comes back up.
The solution is to first remove the extra mon from quorum
before taking down the mon pod.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When doing the clean-up of raw device OSDs, it was not taking metadata
and wal devices into account. This commit discover them via the output
of `ceph-volume raw list`, which is returning `device_db` and/or
`device_wal` if they are present.
After discovering the metadata and wal device it also clean them and
close the encrypted device if any.
Signed-off-by: Mathias Chapelain <mathias.chapelain@proton.ch>
Allow RGW users to mount arbitrary volumes to RGW pods. This follows the
pattern that was established for NFS to support SSSD and LDAP, and
reuses much of the same code.
This opens the door wider for advanced users to take advantage of some
Ceph RGW features that Rook doesn't have first class support for.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Only single pool will get created if there are multiple
data pool entries with same name. This PR just adds a check
to fail if duplicate pools are present.
Signed-off-by: sp98 <sapillai@redhat.com>
Previously, Rook would fail to create monitors for a `CephCluster` spec that
required them to be located in distinct failure domains:
```yaml
spec:
mon:
count: 3
failureDomainLabel: topology.kubernetes.io/zone
zones:
- eu-central-1a
- eu-central-1b
- eu-central-1c
```
This was due to the fact that Rook was mistakenly getting the
`failureDomainLabel` from `spec.mon.stretchCluster.failureDomainLabel`.
This commit ensures `spec.mon.failureDomainLabel` is being used instead, which
fixes the cluster deployment for the spec above.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Alerting on controller-runtime's workqueue_depth can be useful for
debugging controllers. Also having a prometheus target for a pod gives
another data point that the system is working as expected. It is useful
for uptime alerts.
Make the bind address configurable via the configmap while still retaining the default
behavior that it is disabled.
Resolves: #14538
Signed-off-by: Justin Cichra <jcichra@cloudflare.com>
updating csi-operator version in go.mod and csi-operator.yaml
to use latest release v0.1. And also fixing one small bug
where csi-driver log level was set in csi-operator log level.
Signed-off-by: subhamkrai <srai@redhat.com>
The jobs to detect the ceph and csi versions now can have
custom annotationso and labels added to them. They are
very short-lived jobs, but they may need custom annotations
in some environments to run.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For the specification see:
<https://github.com/rook/rook/blob/master/design/ceph/object/swift-and-keystone-integration.md>
* extend the API object specs for swift and keystone integration
* adapt rgw to the new go-ceph version
- The parameter lists of the API call have changes, as parameters
ignored by the RGW Admin Ops API are no longer serialized, therefore
the mock has to be adapted.
- There is now validation for the user keys that are passed to the
User get API, therefore things failed when we had empty keys in our
User proxy object.
* expand the reconcile loop for the swift and keystone integration
* fix minor mistakes in design document
* add env var to pass extra args to minikube
Minikube decides CPU cores and memory automatically based on the
available resources on the machine which may be insufficient to
run rook. This commit adds an environment variable to add arbitrary
arguments to the minikube command, so both can be specified if
desired.
* integration tests for swift and keystone
The new integration of swift or s3 and keystone support by rook
does not have any integration tests yet.
This commit introduces integration tests for swift and keystone. The
tests are done against a minimal keystone setup (keystone container
image from Yaook-project (https://yaook.cloud), sqlite as database
backend, cert-manager and trust-manager for test certificate setup).
To prevent hardcoded credentials, passwords are generated
by the tests. The integration tests use the openstack client
(keystone- and swift-functionality) (https://docs.openstack.org/
python-openstackclient/ latest/). This was a concious design decision
to use client tooling as close as possible to the end user instead of
using other go-libraries (such as gophercloud).
* add documentation on swift and keystone
Currently there is no documentation on the use of Swift to access
an object store as well as the use of OpenStack keystone for
authentication.
This commit adds documentation on the use of Swift and OpenStack
keystone, as well as CRD-related documentation and an example setup.
* add integration tests for S3 via keystone
This commit introduces integration tests for s3 and keystone. The
tests are run against the same minimal keystone setup that the tests
for swift and keystone use.
The integration tests use the aws s3 client to use client tooling as
close as possible to the end user instead of using other go-libraries.
Co-authored-by: Jan Klippel <jan.klippel@uhurutec.com>
Co-authored-by: Silvio Ankermann <silvio.ankermann@cloudandheat.com>
Signed-off-by: Sebastian Riese <sebastian.riese@cloudandheat.com>
Signed-off-by: Jan Klippel <jan.klippel@uhurutec.com>
Signed-off-by: Silvio Ankermann <silvio.ankermann@cloudandheat.com>
adding annotation to existing CSI driver resource so that
csi-operator can take ownership of existing CSI driver resources.
Signed-off-by: subhamkrai <srai@redhat.com>
adding code changes,rbac changes required for create the new
Ceph-CSI operator CR named cephCluster in api group 'csi.ceph.io'.
Signed-off-by: subhamkrai <srai@redhat.com>
RGW can only serve a single certificate. This limitation means that the
prior behavior of using the default service for admin ops when TLS is
enabled may mean it requires additional complex certificate management
to make sure the object store uses a certificate valid for Rook internal
admin ops and user connections.
This is needlessly complex for users. Instead, change Rook's behavior
and documentation to clarify that it will use the same endpoint intended
for S3 client applications. This means that users have a more
straightforward path to enabling both Rook and consuming applications.
More info: https://github.com/rook/rook/issues/14530
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
issue:
external-provisioner (v5) enabled topology feature-gate by default
and the current implementation in Rook uses a conditional block to
enable the topology feature gate. This approach now does not directly
reflect the state of the `CSI_ENABLE_TOPOLOGY`.
fix:
replacing the conditional block with a direct use of the
`CSI_ENABLE_TOPOLOGY` for flag value.
Signed-off-by: Praveen M <m.praveen@ibm.com>
dependabot[bot]
Artem Torubarov
Blaine Gardner
Travis Nielsen
subhamkrai
Madhu Rajanna
Artem Torubarov
Michael Adam
Mathias Chapelain
sp98
Benoît Knecht
chanyoung
Justin Cichra
parth-gr
Praveen M
ShravaniVangur
