The OSDs may require different resources based on their device
class. The overall osd resources were only being used, rather
than properly looking up the specific device class resources.
Now the expected resources will take affect per device class.
Co-authored-by: Matthias Osthues <osthues.matthias@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit d3c0bacd88)
if there a bit long to update osds in parallel,
we need to timeout and abort the synchronous loop
and start the cluster reconcile again from the beginning
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 4377823675)
When OSDs start, init containers attempt to get the latest CephX key for
the OSD to allow OSDs to potentially continue working after key rotation.
However, in Ceph corner cases, mons could be unavailable while OSDs
could still be viable with existing on-disk keys. Since key rotation is
a rare event, it's likely that the on-disk keys are still good.
The worst case scenario is that key updates were needed but didn't
succeed in init containers. In this case, instead of the init container
failing, the OSD startup will fail instead. Thus, this should introduce
no extra risk but merely shift the failure to a different container.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit d9d31fe527)
when the osd is created there is no need for
osd bootstrap keyring, so remove the keyring
and keyring file,
New keyring will be created if
new osd need to be provisoned
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 794a232835)
ceph-volume creates osd-lockbox keys for the encryted osds. This PR
rotates those keys along with the OSD keys.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit b4e1c1720d)
Cleanup up overall usage of CephX statuses in CephCluster.
Convert all CephX statuses to non-pointer types. There is no specific
need for pointer types, and keeping these as non-pointers means there is
not a risk of nil pointer exceptions in all the various Rook controllers
for upgraded clusters.
Move initialization of CephCluster CephX status items to
`preMonStartupActions()`. This helps resolve 2 issues:
1. 'Uninitialized' state was being set for external CephClusters where
CephX statuses are not relevant.
2. 'Uninitialized' state was being set for upgraded clusters whose key
status cannot be determined.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 2fd9c9a88c)
add a validation check to fail osd deployment when topology labels
like rack or chassis are duplicated across parent domains
(e.g., zones). this prevents invalid crush map hierarchies
(dfbugs-2610).
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 973f8a3a35)
Implement automated CephX key rotation for OSDs.
OSDs have marshalled CephX statuses applied as an annotation on the OSD
pod spec, which differs from other Rook Ceph daemons for a two reasons:
A large cluster could have hundreds or thousands of OSDs, so it is more
critical that Rook avoid rotating OSD keys more than once in the event a
CephCluster reconcile restarts partway through OSD creation/updation.
OSDs do not have their CephX keys stored in K8s Secrets, whose resource
version is used for enforcing the desired restart behavior other daemon
pods like RGWs.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 4189a196c1)
Create a new OSD pod init container that loads the latest CephX key for
the OSD. The init container must be run after OSD activation, due to
keyfile reset behavior of ceph-bluestore-tool, used during activation.
The primary purpose of this work is to allow OSDs to start and run
correctly after key rotation, whether done manually by users or
automatically by future Rook work.
This work makes redundant prior code changes done in #14826. The CI test
added in the prior work is kept to ensure no regression.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This is the first implementation of CephX key rotation in Rook.
Adds key rotation API from design PR 15915.
Also add helper methods for rotating keys, determining when keys
need to be rotated, and for generating CephX key statuses. These will be
reusable for other Rook reconciles beyond object/RGW.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Allow force creation of OSD on a device previously configured in a different ceph cluster.
The OSD prepare pod job will zap the OSD disk using ceph-volume lvm zap
if that disk has metadata from a different ceph cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
this commit remove the code which sets the dmcrypt encryption
key from secret as environment variable in the prepare pod job
spec. Now, the env will be set under function `setKEKinEnv`, which
tries to reads secret from k8s first method `c.IsK8s()`under
`GetSecret` and then check for KMS to ready and apply env directly.
Signed-off-by: subhamkrai <srai@redhat.com>
This change cleans up and standardizes import statements across the Ceph operator code. It removes redundant or duplicate imports and reorganizes alias names for improved clarity and consistency. Additionally, the ST1019 exception was removed from .golangci.yaml now that the code complies with the rule.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Refactored multiple conditional if-else blocks into switch statements to improve readability and maintainability. Also removed outdated staticcheck rule comments (QF1002, QF1003) from .golangci.yaml.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Labels cannot be longer than 64 characters, and if the image name
is too long we log a verbose message about the label that we can
just log now as debug level.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With a osd resize operation, currently pvc and pv may
takes more time then expected.
And so the osd dont get resized and need manual re-start
as currently we don't have a watch on osd's
controller that watches pv and get it resized.
add a wait time till pvc is not resized
Signed-off-by: parth-gr <partharora1010@gmail.com>
One ore more OSDs can be down and PGs can still be active+clean (data
was rebalanced to other available OSDs). This PR sets
maxunavailable=1+downOSDs to allow one healthy to be drained.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
If a locally mounted volume is blocked on reads because this OSD is
down, lvs will deadlock trying to read from it. To avoid this, tell LVM
to filter out RBD volumes from its scanning process.
Signed-off-by: Steven Fackler <sfackler@gmail.com>
Some ceph.conf settings need to be unique per node
depending on the hardware. The ceph.conf overrides
can now be customized per-node by creating a node-specific
configmap that will be loaded for all OSDs and OSD prepare
jobs on that node, instead of the default ceph.conf
that is loaded from the rook-config-override configmap.
The node-specific configmaps must have the label
node.config.rook.io/osd, and be named as:
rook-config-override-<hostname>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ci was using a pretty old version og golangci-lint.
This updates to the latest version.
Additionally, it silences some
gosec integer conversion overflow false positves
and fixes some real errors of this category
and string format errors found by golangci-lint, while at it.
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Michael Adam <obnox@samba.org>
With the v19.2.0 release being out for some time now,
update the default version to be deployed with Rook
as v19.2.0.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
GetOSDResources method was populating
wrong device class to get the osd
resources
This fix will fix the deviceClass label
for the GetOSDResources function
Signed-off-by: parth-gr <partharora1010@gmail.com>
currently device class and device type
labels were clubbed with eachother
create a seperate label, as these two labels
can be seperate
Signed-off-by: parth-gr <partharora1010@gmail.com>
When node topology labels with duplicate values are detected, rook silently discards all but one label.
This adds a warning informing administrators of this, allowing for easier identification of labeling issues.
Signed-off-by: Fred Heinecke <fred.heinecke@yahoo.com>
If host path keyring file exists and created during osd-prepare but not
imported to ceph auth then rook-ceph-osd activate init container will
create new keyring in ceph auth by ceph auth get-or-create command. To
avoid keyrings difference in host path and in ceph auth, consider
importing key from host path keyring file if no keyring found in ceph
auth.
Resolves: #14825
Signed-off-by: Peter Razumovsky <prazumovsky@mirantis.com>
Resolves CIS benchmark 5.2.8 rule by adding capabilities with
explicitly defined empty "add" list (where it needed) and with
NET_RAW capability in "drop" list.
5.2.8 Minimize the admission of containers with added capabilities
Containers must drop the `NET_RAW` capability and are not permitted
to add back any capabilities.
Signed-off-by: Peter Razumovsky <prazumovsky@mirantis.com>
The /run/udev directory is now mounted in the OSD init container. This change
is necessary because `ceph-volume activate` needs access to /run/udev [1] in order
to properly handle devices. Without this mount, `ceph-volume activate` could
fail to discover devices during OSD initialization.
[1] https://github.com/ceph/ceph/commit/c2e8c295dc46f1bd74861feb163d9d82f8bb5509
Signed-off-by: Guillaume Abrioux <gabrioux@ibm.com>
MustDelete DeleteOption was set to `true` when deleting
osd-repalce-config configMap. This cm won't existing after
all the OSDs get migrated. So deletion of the non-existent
cm will result in error. This PR removes `mustDelete: true` from
the DeletionOption when deleting osd-replace-config configmap
Signed-off-by: Santosh Pillai <sapillai@redhat.com>