Pools in stretch clusters must all specify the same
CRUSH rule. No pools can use a different rule. When there
is a change in the device class, we do not even expect to update
the crush rules in a stretch cluster. Different device classes
are not supported in stretch clusters, and it's expected to be
a homogenous environment. Therefore, skip all crush rule updates
in stretch clusters.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit b92bbba671)
While adding a new encryption key to slot 1
if there exists a key in slot 1 which is not
equal to the one we want to update it with,
we kill the slot and then add the new key to it.
While killing the slot, the existing code uses
the new key, which is not valid in such cases.
This patch modifies the code to use the key in
slot 0 (the one that we know works) to kill the slot.
Signed-off-by: Niraj Yadav <niryadav@redhat.com>
(cherry picked from commit b8b7af3495)
this lead to creation of 2 crush rules because of difference in
deviceClass names:
eg:
creating a new crush rule for changed deviceClass
("default~hdd"-->"hdd") on crush rule "test-crush-bug-az-ab-4"
Signed-off-by: Deepika Upadhyay <deepikaupadhyay01@gmail.com>
(cherry picked from commit 41116be919)
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit e479b051bc)
This reduces the safe-to-remove retry interval from 1m to 15s.
Closes#14247
Signed-off-by: Brian Dowling <bjd-dev@simplicity.net>
(cherry picked from commit ef0ed93134)
Since pacific is no longer supported, we can remove pacific specific
code.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
(cherry picked from commit f776c0b35e)
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
(cherry picked from commit 70a7e61da5)
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit f57a8b6bbe)
Cleanup the resources created by subvolumegroup
when its deleted. Following resources will be cleaned up:
- OMAP value
- OMAP keys
- Clones
- Snapshots
- Subvolumes
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit ef00fdac53)
For image mode mirroring, if cephBlockPool.Pool.Spec.Mirroring.Enable
is set to false, then remove the peer cluster and disable mirroring on
all the pool if the user has disabled mirroring on all the pool images.
If mirroring is not disabled on all the pool images, then reconcile will
fail asking the users to manually disable mirroring on those images.
Signed-off-by: sp98 <sapillai@redhat.com>
Reduce CRD size by removing some descriptions for things that
(a) are long, (b) are repeated, and (c) are commong kubernetes types.
Remove the `Status` field from VolumeClaimTemplates (a.k.a. PVCs) in
types.go to remove all unnecessary status-related fields.
Use `yq` to go through generated `crds.yaml` to strip out descriptions
for well-known k8s types that are long and repeated where we can't
remove them from types.go. This is mostly placement descriptions and
volumeSource descriptions.
The overall `crds.yaml` file is reduced to less than 60% of its original
size.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Co-authored-by: Blaine Gardner <blaine.gardner@ibm.com>
The crush rule will be updated when the failure domain changes.
This update can be skipped when the expected crush rule is
already configured. Otherwise, the log has a confusing message
that makes it appear that the crush rule was updated
when in fact it was not.
Signed-off-by: travisn <tnielsen@redhat.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
The validation logic of checking the number of devices is
wrong when `metadataDevice` is set and `osdsPerDevice` > 1.
`len(cvReports)` is the expected number of OSDs and is
the number of specified data devices multiplied
by `osdsPerDevice`.
Closes: https://github.com/rook/rook/issues/13637
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
create the ceph config and keyring file in the osd prepare pod
before starting the OSD migration. These files are needed to
run any ceph command.
Signed-off-by: sp98 <sapillai@redhat.com>
This implements the "Ceph Config via Ceph Cluster CRD" design document
as a `cephConfig:` structure on the CRD.
This also fixes the `yq` commands used to manipulate the
`cluster-test.yaml` that caused CI issues for this PR and potentially
unknowingly others.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Originally we create it using this cmd
ceph fs subvolume create <vol_name> <subvol_name>
So we can have 2 variables filesystem and subvolume name,
Currently the CR doesn't allow us to make subvolume-name
as constant as needed to "csi" because of k8s limitations
Signed-off-by: parth-gr <paarora@redhat.com>
Adding callback function in the osd removal method
as in downstream there is requirement of adding extra
check before proceeding with osd removal.
Signed-off-by: subhamkrai <srai@redhat.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
This patch adds `pgHealthyRegex` field to DisruptionManagementSpec.
`pgHealthyRegex` is a regular expression that is used to determine which
PG states should be considered healthy. The default value of
`pgHealthyRegex` is:
^(active\+clean|active\+clean\+scrubbing|active\+clean\+scrubbing\+deep)$
which is effectively the same as before.
Signed-off-by: Ryotaro Banno <ryotaro.banno@gmail.com>
This reverts commit 093125904b.
Once we introduced encrypted OSD on partition in #12924.
However, even though `encryptedDevice` field is `true`,
an non-encrypted OSD is created. To prevent the creation
of misconfigured OSD, it's better to revert #12924 for now.
Initially, I intended to correct this problem. However, I found
it will take long time because we need to change the KMS-related
code, init containers of both OSD pod and OSD prepare pod.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
The activeStandby property of the filesystem CR was not
taking effect when changed from true to false. The standby
was only being enabled when true, but never applied when
changed to false.
Signed-off-by: travisn <tnielsen@redhat.com>
The json tag in struct MonMap had a spelling error where "json" was incorrectly splled as "josn". This commit corrects the spelling to "json".
Signed-off-by: go-bai <599500688@qq.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
The vault server dependencies were pulling a lot of indirect modules
that are not necessary for Rook. The modules were only used
for testing. The vault github explicitly indicates that:
"Some other projects have made a practice of doing so in order to
take advantage of testing tooling that was developed for testing Vault itself.
This is not, and has never been, a supported way to use the Vault project."
When attempting to update to vault v1.13.3, we are hitting
such an unsupported configuration with go modules
that are impossible to satisfy. By removing the tests
that were using the vault server project, we can remove
this large set of dependencies, enable updating to v1.13.3,
and also reduce the modules pulled in by vault.
Signed-off-by: travisn <tnielsen@redhat.com>
The go modules are updated to the latest client-go, vault,
and other modules. There does not appear to be a combination
of modules that will allow us to use vault v1.13.3, so we
stick with v1.13.2.
Signed-off-by: travisn <tnielsen@redhat.com>
Dashboard ac-user-create cmd was taking more time
then the usual ceph command to run,
So increased the timeout to run the cmd, and
now dashboard admin user is sucessfully created
Closes: https://github.com/rook/rook/issues/12113
Signed-off-by: parth-gr <paarora@redhat.com>
Travis Nielsen
Niraj Yadav
Deepika Upadhyay
Brian Dowling
Satoru Takeuchi
NymanRobin
sp98
Madhu Rajanna
Blaine Gardner
Redouane KachachandBlaine Gardner
Liang Zheng
parth-gr
subhamkrai
Alexander Trost
Rakshith R
Ryotaro Banno
guoguangwu
go-bai