If device set names are duplicated, the OSDs will be very confused
when multiple OSDs attempt to be configured with the same
device set names. Updating the device set names does not help
get out of the error situation since the OSDs will also be
confused about which device set they belong to. The reconcile
must fail completely if the device set names are duplicated
to avoid this error scenario.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 7f68d8be38)
When OSDs flap, ceph stops the OSD daemon if its marked down greater than
5 times in 600 seconds. But OSD pod restarts and marks the OSD `up` again.
This causes the PGs mapped to these OSDs to peer. While the PGs are peering,
IO to these PGs are blocked.
So we need to ensure that if ceph is marking OSD `down` due to flapping, OSD pod
should not restart to mark the OSDs `up` again.
This PR adds a sleep to the OSD pod if the container returned with a 0 exit code
Default behavior is to sleep for 6 hrs. But user can configure it from the
ceph cluster spec.
Signed-off-by: sp98 <sapillai@redhat.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
The rook-version tag must not be set on the pod spec labels
since it will result in the ceph daemons being restarted every
time there is a rook version update, even if the ceph version
or pod spec was not otherwise updated.
The rook-version tag was being added to the OSD pod spec
due to a shared pointer to the labels. The code intended
to only add the version label to the deployment labels,
but since the pod labels shared the map variable, the
pod unintentionally also had the version label added.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit replaces `os.Setenv` with `t.Setenv` in tests. The
environment variable is automatically restored to its original value
when the test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.Setenv
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
With octopus coming to end of life, we remove support from
Rook for deploying Ceph Octopus and assume a min version of
Pacific v16. Any checks for octopus or earlier are removed
from the reconciles since they are obsolete.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
adding observedGeneration field in the cephcluster cr
status for having better control on reconciling,
as observedGeneration field will be updated by the controller
Closes: https://github.com/rook/rook/issues/9673
Signed-off-by: parth-gr <paarora@redhat.com>
The cluster info is important context for the cluster controller to
create the cluster, and all the fields must be properly set.
A test cluster name was being set temporarily, resulting in
mons incorrectly getting the wrong cluster CR name. There is no
known issue from the temporary value, it was just exposed by
https://github.com/rook/rook/pull/8678 setting the value to a label.
Now the functions are more clearly named so only unit and
integration tests should be using the test value for the cluster
name where it is not important.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds context parameter to utilities in opcontroller to
remove context.TODO use in opcontroller. By this, we can handle
cancellation of reconcilers in a fine-grained way.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
earlier, we had the issue for osd placement regarding
whether we should merge the placements or not.
Now, we have option `skipApplyAllPlacement` to
enable/disable osd placement. By default it is false
which means it will merge both placement.All() and
storageClassDeviceSets.Placement, when true
it will only apply storageClassDeviceSets.Placement.
Also, adding unit test.
Closes: https://github.com/rook/rook/issues/8135
Signed-off-by: subhamkrai <srai@redhat.com>
Both `ExecuteCommandWithOutputFileTimeout()` and
`ExecuteCommandWithOutputFile()` generate unnecessary system calls by
creating/reading/removing files where the stream output of the command
can simply be used. So sticking with `ExecuteCommandWithOutput()` and
`ExecuteCommandWithCombinedOutput()` for reading outputs is sufficient.
Closes: https://github.com/rook/rook/issues/8343
Signed-off-by: Sébastien Han <seb@redhat.com>
Add ability to set device class for existing osd deployments,
based on its crush map device class.
Related-Issue: rook#8028
Signed-off-by: Denis Egorenko <degorenko@mirantis.com>
Implement the first step of `design/ceph/resource-dependencies.md` to
add dependency checking when deleting a CephCluster.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The rook.io/v1 package was only an internal implementation detail and
does not have any CRDs that rely on it. The CRD deserialization should
handle the change in internal types without any issue. This separation
gives more flexibility for the storage providers to implement exactly
what is needed for their storage provider instead of forcing to use the
same types and risk affecting another storage provider.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The nodeAffinity for portable OSDs is needed to ensure the OSDs are
tied to the same zone or other failure domain where the OSD was
prepared and where it is expected to run. During upgrade the topology
affinity was not being detected since the osd prepare job is skipped
in that case. Now the topology will be detected from the running
OSD daemon pod's node.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Update OSDs in parallel per the design in
design/ceph/update-osds-in-parallel.md
The max number of OSDs updated in parallel is currently fixed at 20.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd prepare job detects the failure domain for the OSD by querying
the node topology labels. This topology is then assigned to the OSD
daemon in the CRUSH map. Previously, the affinity was required to be
set in the cluster CR, but it was very difficult to get right. Now the
operator will enforce the correct topology label on the OSD daemon
nodeAffinity by setting the label of the lowest topology in the hierarcy.
For example, if there are region, zone, and rack labels, the rack label
would be used to set the node affinity for the OSD daemon. If an
OSD prepare job is run in rack1, the corresponding OSD daemon will
have node affinity to rack1 to ensure the same topology. Previously,
the OSD could have ended up in rack2 unless the storageClassDeviceSet
placement was very carefully crafted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add a new OSD provisioner status (reported by provisioner configmap)
that denotes that an OSD is preexisting and that OSD prepare does not
need to be run for the OSD. This only applies to OSDs on PVC currently
where existence of a deployment for the OSD indicates no further
provisioning needs to occur. New status is "preexisting".
Allow creating new OSDs on PVCs before updating existing ones by
allowing deferring OSDs during processing of OSD provisioning status
ConfigMaps. Deferral is identified by new "preexisting" status.
Add a unit test to ensure OSD on PVC provisioning occurs as expected
including deferring already-created OSDs to be updated after new PVCs
are created.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Currently, mgr deployment has two overlapping environment variables, ROOK_POD_IP.
This causes kube-apiserver to create error logs
Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
We can now prioritize orchestrations on certain event. Today only two
events will cancel on-going orchestrations (if any):
* request for cluster deletion
* request for cluster upgrade
If one of the two are caught by the watcher we will cancel the on-going
orchestration.
For that we implemented a simple approach based on check points, where
we will check for a cancellation request in certain part of the
orchestration. Mainly before each mons/mgr/osds orchestration loops.
This solution is not perfect, but we are waiting for the
controller-runtime to release its 0.7 version which will embed context
support. With that we will be able to cancel reconciles more precisely
and rapidly.
Operator log example:
```
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-25 12:59:12.986264 I | ceph-cluster-controller: done reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.776947 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
Image: "ceph/ceph:v15.2.5",
- AllowUnsupported: true,
+ AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:33.777039 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.785088 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:33.788626 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.5...
2020-11-25 13:07:35.280789 I | ceph-cluster-controller: detected ceph image version: "15.2.5-0 octopus"
2020-11-25 13:07:35.280806 I | ceph-cluster-controller: validating ceph version from provided image
2020-11-25 13:07:35.285888 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.287828 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.288082 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:35.621625 I | ceph-cluster-controller: cluster "rook-ceph": version "15.2.5-0 octopus" detected for image "ceph/ceph:v15.2.5"
2020-11-25 13:07:35.642688 I | op-mon: start running mons
2020-11-25 13:07:35.646323 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.654070 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:35.868253 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.868573 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:37.074353 I | op-mon: targeting the mon count 3
2020-11-25 13:07:38.153435 I | op-mon: checking for basic quorum with existing mons
2020-11-25 13:07:38.178029 I | op-mon: mon "a" endpoint is [v2:10.107.242.49:3300,v1:10.107.242.49:6789]
2020-11-25 13:07:38.670191 I | op-mon: mon "b" endpoint is [v2:10.109.71.30:3300,v1:10.109.71.30:6789]
2020-11-25 13:07:39.477820 I | op-mon: mon "c" endpoint is [v2:10.98.93.224:3300,v1:10.98.93.224:6789]
2020-11-25 13:07:39.874094 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:40.467999 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:40.469733 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.071710 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:41.078903 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.125233 I | op-mon: deployment for mon rook-ceph-mon-a already exists. updating if needed
2020-11-25 13:07:41.327778 I | op-k8sutil: updating deployment "rook-ceph-mon-a" after verifying it is safe to stop
2020-11-25 13:07:41.327895 I | op-mon: checking if we can stop the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045644 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-a"
2020-11-25 13:07:44.045706 I | op-mon: checking if we can continue the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045740 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:44.109159 I | op-mon: mons running: [a b c]
2020-11-25 13:07:44.474596 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:44.478565 I | op-mon: deployment for mon rook-ceph-mon-b already exists. updating if needed
2020-11-25 13:07:44.493374 I | op-k8sutil: updating deployment "rook-ceph-mon-b" after verifying it is safe to stop
2020-11-25 13:07:44.493403 I | op-mon: checking if we can stop the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135524 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-b"
2020-11-25 13:07:47.135542 I | op-mon: checking if we can continue the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135551 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:47.148820 I | op-mon: mons running: [a b c]
2020-11-25 13:07:47.445946 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:47.448991 I | op-mon: deployment for mon rook-ceph-mon-c already exists. updating if needed
2020-11-25 13:07:47.462041 I | op-k8sutil: updating deployment "rook-ceph-mon-c" after verifying it is safe to stop
2020-11-25 13:07:47.462060 I | op-mon: checking if we can stop the deployment rook-ceph-mon-c
2020-11-25 13:07:48.853118 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
- Image: "ceph/ceph:v15.2.5",
+ Image: "ceph/ceph:v15.2.6",
AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:48.853140 I | ceph-cluster-controller: upgrade requested, cancelling any ongoing orchestration
2020-11-25 13:07:50.119584 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-c"
2020-11-25 13:07:50.119606 I | op-mon: checking if we can continue the deployment rook-ceph-mon-c
2020-11-25 13:07:50.119619 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.130860 I | op-mon: mons running: [a b c]
2020-11-25 13:07:50.431341 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:50.431361 I | op-mon: mons created: 3
2020-11-25 13:07:50.734156 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.745763 I | op-mon: mons running: [a b c]
2020-11-25 13:07:51.045108 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:51.054497 E | ceph-cluster-controller: failed to reconcile. failed to reconcile cluster "rook-ceph": failed to configure local ceph cluster: failed to create cluster: CANCELLING CURRENT ORCHESTATION
2020-11-25 13:07:52.055208 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:52.070690 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:52.088979 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.6...
2020-11-25 13:07:53.904811 I | ceph-cluster-controller: detected ceph image version: "15.2.6-0 octopus"
2020-11-25 13:07:53.904862 I | ceph-cluster-controller: validating ceph version from provided image
```
Closes: https://github.com/rook/rook/issues/6587
Signed-off-by: Sébastien Han <seb@redhat.com>
-creates a single PDB (max-unavailable=1) for all OSDs. This PDB allows one OSD to go down at a given time.
-When a drain is detected, blocking PDBs (max-unavailable=0) will be created for each failure domain that is not being drained and the main PDB (max-unavilable=1) will be deleted. This will allow all the OSDs in the currently drained failure domain to be removed while blocking the deletion of OSDs in other failure domains.
-Once the PGs are healthy again, the blocking PDBs will be deleted and the main PDB will be restored.
-Add PG healthcheck timeout
-Delete any legacy node drain pods and blocking OSD PDBs
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
this commit handle golangci-lint linter errcheck.
`errcheck` - Errcheck is a program for checking for
unchecked errors in go programs. These unchecked errors
can be critical bugs in some cases
To see only staticcheck linter output
`golangci-lint run --disable-all -E errcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
The OSD deployments have some env vars duplicated in the pod spec for
the daemon container, which may cause the detection for patch changes
to fail. Now we ensure the env vars are not duplicated in the OSD pod
spec.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd prepare jobs and osd daemons may have different placement
requirements. In particular, the topology spread constraints
or pod anti-affinity should only work on either the prepare job or
osd daemon, but does not work effectively on both types at the same
time. Therefore, we split out the osd prepare placement to be separate
from the osd daemon placement. If the osd prepare placement is not set
the operator will fall back to the osd daemon placement for
backward compatibility.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This commit allows us to configure status check for each daemon:
* "mon": health check on the ceph monitors (quorum)
* "osd": health check on the ceph osds
* "status": ceph health status check
Each check is controlled by the following settings:
* disabled: whether to disable the check (default: false)
* internal: interval to run the check
* timeout: only valid for mons, is the timeout for unresponsive mon
before failling over.
Example to disable the status health check:
```yaml
healthCheck:
daemonHealth:
status:
disabled: true
```
As part of that, pod's livenessprobe can now be configured via the
following settings:
* disabled: whether to enable or not
* probe: override the current probe in place by a new one
```yaml
healthCheck:
livenessProbe:
mon:
disabled: true
```
Closes: https://github.com/rook/rook/issues/5772
Signed-off-by: Sébastien Han <seb@redhat.com>
An OSD on a PVC when portable=false is assigned to a node
with a node selector. The same node assignment is expected
for the lifetime of the cluster. On subsequent reconciles,
the operator was looking up the node assignment from the
nodeName on the pod spec, which is not set if the pod is down.
The operator needs to retrieve the assignment from the
deployment spec node selector.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
There are many duplicated code to judge whether an OSD is on PVC
or not. Instead, let's introduce a function for this purpose.
It can also be applied to the logic of judging whether an OSD
on PVC has metadata device or not.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
This fixes the resync of the Deployment of the OSD pod that uses
an LV-backed PV.
`getOSDInfo()` reads the configuration of the OSD pod from the existing
Deployment, but it overlooked this case.
Closes: https://github.com/rook/rook/issues/5139
Signed-off-by: morimoto-cybozu <kenji_morimoto@cybozu.co.jp>
The helpers for executing a process have long required an actionName
param which is not being used. Now we remove the old param
while also cleaning up various other usages of the exec
package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The rook types used across the storage providers moved from the v1alpha2
package to the v1 package. This commit points the packages at their new
location. Implementation is expected to remain unchanged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We now always perform ok-to-stop change when the deployment is going to
be updated. This could be for various reasons like change in the spec or
a new Ceph image.
In any case, if Ceph resources are going to be restarted this must be
done carefully.
Also trimmed the isUpgrade variable, the upcoming commit will remove the
need of that variable.
Keeping isUpgrade from the controller code since we need it to detect
whether an orchestration upgrade should be triggered or not (based on
the ceph cluster status).
Also, we keep it on the child controllers so we don't go into an
orchestration phase if the cluster image hasn't changed. The child does
not need to be updated/go into its orchestration phase because the
cluster CR changed.
Closes: https://github.com/rook/rook/issues/4379
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
sp98
guoguangwu
parth-gr
Eng Zer Jun
Blaine Gardner
Yuichiro Ueno
subhamkrai
Sébastien Han
Denis Egorenko
Lars Lehtonen
Satoru Takeuchi
shenjiatong
binoue
Arun Kumar Mohan
Jonas Schäfer
Blaine Gardner
morimoto-cybozu