if the import from the peer cluster doesnt
work, because of some reasons like
cluster health, network, etc
the import cmd stuck forever and which
forever stucks the blockppol reconcile
Signed-off-by: parth-gr <partharora1010@gmail.com>
enable and disable the status of rados namespace
mirroring by looking at statusCheck spec of blockpool
Signed-off-by: parth-gr <partharora1010@gmail.com>
The upgrade of the mds daemons pauses to wait for the
stopping of standby daemons before the filesystem upgrade
is completed. If there are multiple filesystems, there
could be standbys for other filesystems that will not be
stopped at the time of the upgrade of another filesystem.
Thus, the standbys may not upgrade and be stuck on the
previous version. Now, the standby upgrade will only wait
for standbys for the same filesystem.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This is similar to #14052 we did for radosnamespace
and this is an extension to support cleanup
at the blockpool level to cleanup the images
and the snapshots in a pool.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Modify the CR to allow mirroring of an rados namespace
to a differently named namespace on the remote cluster
1) enable rados namesapce mirroring only
if the blockpool mirrroing is enabled
2) disable blockpool mirroing only if
all the namesapce mirroing is disabled
if the rbd mirroring fails and ceph version is not supported
provide a error message with supported version details
and reason of failing
Signed-off-by: parth-gr <partharora1010@gmail.com>
Given that Ceph Quincy (v17) is past end of life,
remove Quincy from the supported Ceph versions,
examples, and documentation.
Supported versions now include only Reef and Squid.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
default application name is updated inside the `CreatePool` method. Send
pool spec as address in order to preserve this change.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The crush rules may have a negative step num.
Rook had assumed negative values were not possible,
but just had not been encountered previously in
a custom crush rule.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Normally the device class of an OSD is determined at provisioning
and is not updated thereafter. In some scenarios the admin may
want to force update the device class to a new value. The device
classes can be updated by first setting allowDeviceClassUpdate
in the storage spec of the cephcluster, then updating the
device class specified on the deviceSets or other OSDs.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Updating the device class swallowed any error if updated
for the pool. The error was not even logged, so we couldn't
troubleshoot why the new crush rule was not applied.
Log the error for troubleshooting and also fail the pool
reconcile since the desired configuration was not applied.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Pools in stretch clusters must all specify the same
CRUSH rule. No pools can use a different rule. When there
is a change in the device class, we do not even expect to update
the crush rules in a stretch cluster. Different device classes
are not supported in stretch clusters, and it's expected to be
a homogenous environment. Therefore, skip all crush rule updates
in stretch clusters.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this lead to creation of 2 crush rules because of difference in
deviceClass names:
eg:
creating a new crush rule for changed deviceClass
("default~hdd"-->"hdd") on crush rule "test-crush-bug-az-ab-4"
Signed-off-by: Deepika Upadhyay <deepikaupadhyay01@gmail.com>
this will be disabled by default but in scenarios where the user want to
update failureDomain, DeviceClass etc, this option can be enabled, to be
noted this can lead to lot of data rebalancing and remapping. Use with
caution
Signed-off-by: Deepika Upadhyay <deepika.upadhyay@clyso.com>
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
The mds standby test was timing out after six seconds on
three different attempts, causing a single unit test to
take almost 20 seconds. Now we reduce the wait time to
a total of three seconds.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Cleanup the resources created by subvolumegroup
when its deleted. Following resources will be cleaned up:
- OMAP value
- OMAP keys
- Clones
- Snapshots
- Subvolumes
Signed-off-by: sp98 <sapillai@redhat.com>
For image mode mirroring, if cephBlockPool.Pool.Spec.Mirroring.Enable
is set to false, then remove the peer cluster and disable mirroring on
all the pool if the user has disabled mirroring on all the pool images.
If mirroring is not disabled on all the pool images, then reconcile will
fail asking the users to manually disable mirroring on those images.
Signed-off-by: sp98 <sapillai@redhat.com>
The crush rule will be updated when the failure domain changes.
This update can be skipped when the expected crush rule is
already configured. Otherwise, the log has a confusing message
that makes it appear that the crush rule was updated
when in fact it was not.
Signed-off-by: travisn <tnielsen@redhat.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
This implements the "Ceph Config via Ceph Cluster CRD" design document
as a `cephConfig:` structure on the CRD.
This also fixes the `yq` commands used to manipulate the
`cluster-test.yaml` that caused CI issues for this PR and potentially
unknowingly others.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Originally we create it using this cmd
ceph fs subvolume create <vol_name> <subvol_name>
So we can have 2 variables filesystem and subvolume name,
Currently the CR doesn't allow us to make subvolume-name
as constant as needed to "csi" because of k8s limitations
Signed-off-by: parth-gr <paarora@redhat.com>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
This patch adds `pgHealthyRegex` field to DisruptionManagementSpec.
`pgHealthyRegex` is a regular expression that is used to determine which
PG states should be considered healthy. The default value of
`pgHealthyRegex` is:
^(active\+clean|active\+clean\+scrubbing|active\+clean\+scrubbing\+deep)$
which is effectively the same as before.
Signed-off-by: Ryotaro Banno <ryotaro.banno@gmail.com>
The activeStandby property of the filesystem CR was not
taking effect when changed from true to false. The standby
was only being enabled when true, but never applied when
changed to false.
Signed-off-by: travisn <tnielsen@redhat.com>
The json tag in struct MonMap had a spelling error where "json" was incorrectly splled as "josn". This commit corrects the spelling to "json".
Signed-off-by: go-bai <599500688@qq.com>
Dashboard ac-user-create cmd was taking more time
then the usual ceph command to run,
So increased the timeout to run the cmd, and
now dashboard admin user is sucessfully created
Closes: https://github.com/rook/rook/issues/12113
Signed-off-by: parth-gr <paarora@redhat.com>
parth-gr
Travis Nielsen
parth-gr
Madhu Rajanna
Santosh Pillai
Blaine Gardner
Deepika Upadhyay
Satoru Takeuchi
NymanRobin
Alexander Trost
Rakshith R
Ryotaro Banno
subhamkrai
go-bai
Miles Simpson
Blaine Gardner