Merge branch 'release/v2.10.1'

HISTORY.rst

@@ -4,6 +4,43 @@ Release Notes
 PlatformIO 2.0
 --------------
 
+2.10.1 (2016-06-13)
+~~~~~~~~~~~~~~~~~~~
+
+* Re-submit a package to PyPI
+
+2.10.0 (2016-06-13)
+~~~~~~~~~~~~~~~~~~~
+
+* Added support for `emonPi <https://github.com/openenergymonitor/emonpi>`__,
+  the OpenEnergyMonitor system
+  (`issue #687 <https://github.com/platformio/platformio/issues/687>`_)
+* Added support for `SPL <http://platformio.org/frameworks/spl>`__
+  framework for STM32F0 boards
+  (`issue #683 <https://github.com/platformio/platformio/issues/683>`_)
+* Added support for `Arduboy DevKit <https://www.arduboy.com>`__, the game system
+  the size of a credit card
+* Updated ARM mbed framework package to v121
+* Check program size before uploading to the board
+  (`issue #689 <https://github.com/platformio/platformio/issues/689>`_)
+* Improved firmware uploading to Arduino Leonardo based boards
+  (`issue #691 <https://github.com/platformio/platformio/issues/691>`_)
+* Fixed issue with ``-L relative/path`` when parsing ``build_flags``
+  (`issue #688 <https://github.com/platformio/platformio/issues/688>`_)
+
+2.9.4 (2016-06-04)
+~~~~~~~~~~~~~~~~~~
+
+* Show ``udev`` warning only for the Linux OS while uploading firmware
+
+2.9.3 (2016-06-03)
+~~~~~~~~~~~~~~~~~~
+
+* Added support for `Arduboy <https://www.arduboy.com>`__, the game system
+  the size of a credit card
+* Updated `99-platformio-udev.rules <https://github.com/platformio/platformio/blob/develop/scripts/99-platformio-udev.rules>`__ for Linux OS
+* Refactored firmware uploading to the embedded boards with SAM-BA bootloader
+
 2.9.2 (2016-06-02)
 ~~~~~~~~~~~~~~~~~~
 

docs/articles.rst

@@ -23,6 +23,7 @@ Here are recent articles about PlatformIO:
 2016
 ^^^^
 
+* Jun 3, 2016 - **Daniel Eichhorn** - `ESP8266: Continuous Delivery Pipeline – Push To Production <http://blog.squix.org/2016/06/esp8266-continuous-delivery-pipeline-push-to-production.html>`_
 * May 30, 2016 - **Ron Moerman** - `IoT Development with PlatformIO <https://electronicsworkbench.io/blog/platformio>`_
 * May 29, 2016 - **Chris Synan** - `Reverse Engineer RF Remote Controller for IoT! <http://www.instructables.com/id/Reverse-Engineer-RF-Remote-Controller-for-IoT/?ALLSTEPS>`_
 * May 26, 2016 - **Charlie Key** - `7 Best Developer Tools To Build Your NEXT Internet of Things Application <https://www.losant.com/blog/7-best-developer-tools-to-build-your-next-internet-of-things-application>`_

docs/demo.rst

@@ -1,4 +1,4 @@
-..  Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
+..  Copyright 2014-present Ivan Kravets <me@ikravets.com>
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
@@ -19,7 +19,7 @@ Demo & Projects
 Project Examples
 ----------------
 
-Preconfigured demo projects are located in `PlatformIO GitHub <https://github.com/platformio/platformio-examples/tree/develop>`_ repository.
+Pre-configured demo projects are located in `PlatformIO GitHub <https://github.com/platformio/platformio-examples/tree/develop>`_ repository.
 
 "Blink Project"
 ---------------

docs/frameworks/arduino.rst

@@ -176,6 +176,33 @@ Adafruit
       - 8 Kb
       - 0.5 Kb
 
+Arduboy
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``arduboy``
+      - `Arduboy <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
+    * - ``arduboy_devkit``
+      - `Arduboy DevKit <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
 Arduino
 ~~~~~~~
 
@@ -1170,6 +1197,26 @@ OpenBCI
       - 128 Kb
       - 32 Kb
 
+OpenEnergyMonitor
+~~~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``emonpi``
+      - `emonPi <https://github.com/openenergymonitor/emonpi>`_
+      - ATMEGA328P
+      - 16 MHz
+      - 32 Kb
+      - 2 Kb
+
 PONTECH
 ~~~~~~~
 

docs/index.rst

@@ -19,7 +19,7 @@ integration. Arduino and MBED compatible. Ready for Cloud compiling.**
   C/C++ Intelligent Code Completion and Smart Code Linter for the super-fast coding.
   Multi-projects workflow with Multiple Panes. Themes Support with dark and light colors.
   Built-in Terminal with PlatformIO CLI tool and support for the powerful Serial Port Monitor.
-  All advanced instruments without leaving your favourite development environment.
+  All advanced instruments without leaving your favorite development environment.
 * **Development Platforms** - Embedded and Desktop development platforms with
   pre-built toolchains, debuggers, uploaders and frameworks which work under
   popular host OS: Mac, Windows, Linux (+ARM)
@@ -110,8 +110,7 @@ Contents
     platforms/index
     platforms/embedded_boards
     frameworks/index
-    platforms/creating_platform
-    platforms/creating_board
+    platforms/custom_platform_and_board
 
 .. toctree::
     :caption: Library Manager

docs/platforms/atmelavr.rst

@@ -166,6 +166,33 @@ Adafruit
       - 8 Kb
       - 0.5 Kb
 
+Arduboy
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``arduboy``
+      - `Arduboy <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
+    * - ``arduboy_devkit``
+      - `Arduboy DevKit <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
 Arduino
 ~~~~~~~
 
@@ -785,6 +812,26 @@ Microduino
       - 64 Kb
       - 4 Kb
 
+OpenEnergyMonitor
+~~~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``emonpi``
+      - `emonPi <https://github.com/openenergymonitor/emonpi>`_
+      - ATMEGA328P
+      - 16 MHz
+      - 32 Kb
+      - 2 Kb
+
 PanStamp
 ~~~~~~~~
 

docs/platforms/creating_board.rst

@@ -11,8 +11,8 @@
 
 .. _board_creating:
 
-Custom Board
-============
+Custom Embedded Board
+=====================
 
 *PlatformIO* has pre-built settings for the most popular embedded boards. This
 list is available:

docs/platforms/creating_platform.rst

@@ -11,8 +11,8 @@
 
 .. _platform_creating:
 
-Custom Platform
-===============
+Custom Development Platform
+===========================
 
 *PlatformIO* was developed like a tool which would build the same source code
 for the different development platforms via single command :ref:`cmd_run`

docs/platforms/custom_platform_and_board.rst

@@ -0,0 +1,19 @@
+..  Copyright 2014-present Ivan Kravets <me@ikravets.com>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Custom Platform & Board
+=======================
+
+.. toctree::
+    :maxdepth: 2
+
+    creating_platform
+    creating_board

docs/platforms/embedded_boards.rst

@@ -162,6 +162,33 @@ Adafruit
       - 8 Kb
       - 0.5 Kb
 
+Arduboy
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``arduboy``
+      - `Arduboy <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
+    * - ``arduboy_devkit``
+      - `Arduboy DevKit <https://www.arduboy.com>`_
+      - ATMEGA32U4
+      - 16 MHz
+      - 32 Kb
+      - 2.5 Kb
+
 Arduino
 ~~~~~~~
 
@@ -1535,6 +1562,26 @@ OpenBCI
       - 128 Kb
       - 32 Kb
 
+OpenEnergyMonitor
+~~~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``emonpi``
+      - `emonPi <https://github.com/openenergymonitor/emonpi>`_
+      - ATMEGA328P
+      - 16 MHz
+      - 32 Kb
+      - 2 Kb
+
 Outrageous Circuits
 ~~~~~~~~~~~~~~~~~~~
 

docs/platforms/espressif_extra.rst

@@ -240,6 +240,7 @@ Using Arduino Framework with Staging version
 Articles
 --------
 
+* Jun 3, 2016 - **Daniel Eichhorn** - `ESP8266: Continuous Delivery Pipeline – Push To Production <http://blog.squix.org/2016/06/esp8266-continuous-delivery-pipeline-push-to-production.html>`_
 * May 29, 2016 - **Chris Synan** - `Reverse Engineer RF Remote Controller for IoT! <http://www.instructables.com/id/Reverse-Engineer-RF-Remote-Controller-for-IoT/?ALLSTEPS>`_
 * May 22, 2016 - **Pedro Minatel** - `Estação meteorológica com ESP8266 (Weather station with ESP8266, Portuguese) <http://pedrominatel.com.br/esp8266/estacao-meteorologica-com-esp8266/>`_
 * May 16, 2016 - **Pedro Minatel** - `Controle remoto WiFi com ESP8266 (WiFi remote control using ESP8266, Portuguese) <http://pedrominatel.com.br/esp8266/controle-remoto-wifi-com-esp8266/>`_

docs/projectconf.rst

@@ -373,7 +373,7 @@ For more detailed information about available flags/options go to:
 ``src_build_flags``
 ^^^^^^^^^^^^^^^^^^^
 
-An option ``src_build_flags`` has the same behaviour like ``build_flags``
+An option ``src_build_flags`` has the same behavior like ``build_flags``
 but will be applied only for the project source code from
 :ref:`projectconf_pio_src_dir` directory.
 
@@ -585,7 +585,7 @@ Example:
 ``lib_dfcyclic``
 ^^^^^^^^^^^^^^^^
 
-Control cyclic (recursive) behaviour for ``Library Dependency Finder (LDF)``.
+Control cyclic (recursive) behavior for ``Library Dependency Finder (LDF)``.
 By default, this option is turned OFF (``lib_dfcyclic=False``) and means that
 ``LDF`` will find only libraries which are included in source files from the
 project :ref:`projectconf_pio_src_dir`.

docs/quickstart.rst

@@ -1,4 +1,4 @@
-..  Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
+..  Copyright 2014-present Ivan Kravets <me@ikravets.com>
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
@@ -30,7 +30,7 @@ PlatformIO CLI provides special :ref:`cmd_init` command for configuring your pro
 It allows to initialize new empty project or update existing with the new data.
 
 What is more, :ref:`cmd_init` can be used for :ref:`ide`. It means that you will
-be able to import pre-generated PlatformIO project using favourite IDE and
+be able to import pre-generated PlatformIO project using favorite IDE and
 extend it with the professional instruments for IoT development.
 
 This tutorial is based on the next popular embedded boards and development

docs/userguide/cmd_ci.rst

@@ -1,4 +1,4 @@
-..  Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
+..  Copyright 2014-present Ivan Kravets <me@ikravets.com>
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
@@ -29,7 +29,7 @@ Description
 
 :ref:`cmd_ci` command is conceived of as "hot key" for building project with
 arbitrary source code structure. In a nutshell, using ``SRC`` and
-:option:`platformio ci --lib` contents PlatformIO initialises via
+:option:`platformio ci --lib` contents PlatformIO initializes via
 :ref:`cmd_init` new project in :option:`platformio ci --build-dir`
 with the build environments (using :option:`platformio ci --board` or
 :option:`platformio ci --project-conf`) and processes them via :ref:`cmd_run`

docs/userguide/cmd_init.rst

@@ -1,4 +1,4 @@
-..  Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
+..  Copyright 2014-present Ivan Kravets <me@ikravets.com>
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
@@ -47,7 +47,7 @@ Options
 .. option::
     -d, --project-dir
 
-A path to the directory where *PlatformIO* will initialise new project.
+A path to the directory where *PlatformIO* will initialize new project.
 
 .. option::
     -b, --board

platformio/__init__.py

@@ -14,7 +14,7 @@
 
 import sys
 
-VERSION = (2, 9, 2)
+VERSION = (2, 10, 1)
 __version__ = ".".join([str(s) for s in VERSION])
 
 __title__ = "platformio"

platformio/boards/adafruit.json

@@ -7,7 +7,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Adafruit Flora",
             "variant": "flora",
-            "hwid": [
+            "hwids": [
               ["0x239A", "0x8004"]
             ]
         },
@@ -36,7 +36,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Bluefruit Micro",
             "variant": "bluefruitmicro",
-            "hwid": [
+            "hwids": [
               ["0x239A", "0x800A"]
             ]
         },
@@ -85,7 +85,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Feather 32u4",
             "variant": "feather32u4",
-            "hwid": [
+            "hwids": [
               ["0x239A", "0x800C"]
             ]
         },

platformio/boards/arduino.json

@@ -7,7 +7,7 @@
             "mcu": "atmega32u4",
             "usb_product": "LilyPad USB",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x1B4F", "0x9207"],
               ["0x1B4F", "0x9208"]
             ]
@@ -164,7 +164,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Esplora",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x003C"],
               ["0x2341", "0x803C"],
               ["0x2A03", "0x003C"],
@@ -237,7 +237,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Leonardo",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0036"],
               ["0x2341", "0x8036"],
               ["0x2A03", "0x0036"],
@@ -268,7 +268,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Leonardo ETH",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x2A03", "0x8040"],
               ["0x2A03", "0x0040"]
             ]
@@ -402,7 +402,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Micro",
             "variant": "micro",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0037"],
               ["0x2341", "0x8037"],
               ["0x2A03", "0x0037"],
@@ -601,7 +601,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Robot Control",
             "variant": "robot_control",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0038"],
               ["0x2341", "0x8038"],
               ["0x2A03", "0x0038"],
@@ -632,7 +632,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Robot Motor",
             "variant": "robot_motor",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0039"],
               ["0x2341", "0x8039"],
               ["0x2A03", "0x0039"],
@@ -662,7 +662,7 @@
             "f_cpu": "16000000L",
             "mcu": "atmega328p",
             "variant": "standard",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0043"],
               ["0x2341", "0x0001"],
               ["0x2A03", "0x0043"]
@@ -689,7 +689,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Yun",
             "variant": "yun",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x0041"],
               ["0x2341", "0x8041"],
               ["0x2A03", "0x0041"],
@@ -721,7 +721,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Yun Mini",
             "variant": "yun",
-            "hwid": [
+            "hwids": [
               ["0x2A03", "0x8050"],
               ["0x2A03", "0x0050"]
             ]
@@ -751,7 +751,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Arduino Industrial 101",
             "variant": "yun",
-            "hwid": [
+            "hwids": [
               ["0x2A03", "0x8056"],
               ["0x2A03", "0x0056"]
             ]
@@ -781,7 +781,7 @@
             "mcu": "atmega32u4",
             "usb_product": "Linino One",
             "variant": "yun",
-            "hwid": [
+            "hwids": [
               ["0x2A03", "0x8001"],
               ["0x2A03", "0x0001"]
             ]
@@ -813,7 +813,7 @@
             "usb_product": "Arduino Due",
             "variant": "arduino_due_x",
             "ldscript": "sam3x8e.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x003D"],
               ["0x2A03", "0x003D"]
             ]
@@ -843,7 +843,7 @@
             "usb_product": "Arduino Due",
             "variant": "arduino_due_x",
             "ldscript": "sam3x8e.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x003E"],
               ["0x2A03", "0x003E"]
             ]
@@ -873,7 +873,7 @@
             "usb_product": "Arduino Zero",
             "variant": "arduino_zero",
             "ldscript": "flash_with_bootloader.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x804D"],
               ["0x03EB", "0x2157"]
             ]
@@ -903,7 +903,7 @@
             "usb_product": "Arduino Zero",
             "variant": "arduino_zero",
             "ldscript": "flash_with_bootloader.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x804D"],
               ["0x2341", "0x004D"],
               ["0x2341", "0x824D"]

platformio/boards/digistump.json

@@ -85,7 +85,7 @@
             "ldscript": "sam3x8e.ld",
             "usb_product": "Digistump DigiX",
             "variant": "digispark_digix",
-            "hwid": [
+            "hwids": [
               ["0x16D0", "0x078A"]
             ]
         },

platformio/boards/engduino.json

@@ -7,7 +7,7 @@
             "mcu": "atmega32u4",
             "usb_product": "EngduinoV1",
             "variant": "engduinov1",
-            "hwid": [
+            "hwids": [
               ["0x1B4F", "0x9208"]
             ]
         },
@@ -35,7 +35,7 @@
             "mcu": "atmega32u4",
             "usb_product": "EngduinoV2",
             "variant": "engduinov2",
-            "hwid": [
+            "hwids": [
               ["0x1B4F", "0x9208"]
             ]
         },
@@ -63,7 +63,7 @@
             "mcu": "atmega32u4",
             "usb_product": "EngduinoV3",
             "variant": "engduinov3",
-            "hwid": [
+            "hwids": [
               ["0x1B4F", "0x9208"]
             ]
         },

platformio/boards/espressif.json

@@ -133,7 +133,10 @@
             "flash_mode": "qio",
             "ldscript": "esp8266.flash.4m1m.ld",
             "mcu": "esp8266",
-            "variant": "nodemcu"
+            "variant": "nodemcu",
+            "hwids": [
+              ["0x10C4", "0xEA60"]
+            ]
         },
         "frameworks": ["arduino", "simba"],
         "name": "NodeMCU 0.9 (ESP-12 Module)",
@@ -158,7 +161,10 @@
             "flash_mode": "dio",
             "ldscript": "esp8266.flash.4m1m.ld",
             "mcu": "esp8266",
-            "variant": "nodemcu"
+            "variant": "nodemcu",
+            "hwids": [
+              ["0x10C4", "0xEA60"]
+            ]
         },
         "frameworks": ["arduino", "simba"],
         "name": "NodeMCU 1.0 (ESP-12E Module)",

platformio/boards/intel.json

@@ -8,7 +8,7 @@
             "mcu": "ARCv2EM",
             "usb_product": "Genuino 101",
             "variant": "arduino_101",
-            "hwid": [
+            "hwids": [
               ["0x8087", "0x0AB6"]
             ]
         },
@@ -18,11 +18,8 @@
         "upload": {
             "maximum_ram_size": 81920,
             "maximum_size": 196608,
-            "use_1200bps_touch": true,
             "protocol": "script",
-            "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": false
+            "require_upload_port" : true
         },
         "url": "https://www.arduino.cc/en/Main/ArduinoBoard101",
         "vendor": "Intel"

platformio/boards/lattice.json

@@ -6,7 +6,7 @@
             "cpu": "fpga",
             "mcu": "ice40hx1k",
             "variant": "1k",
-            "hwid": [
+            "hwids": [
               ["0x0403", "0x6010"]
             ]
         },
@@ -28,7 +28,7 @@
             "cpu": "fpga",
             "mcu": "ice40hx1k",
             "variant": "1k",
-            "hwid": [
+            "hwids": [
               ["0x0403", "0x6010"]
             ]
         },

platformio/boards/microchippic32.json

@@ -16,8 +16,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/cerebot-32mx4-limited-time-see-chipkit-pro-mx4/",
         "vendor": "Digilent"
@@ -40,8 +39,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=TDGL004",
         "vendor": "Digilent"
@@ -64,8 +62,7 @@
             "maximum_size": 126976,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-mx3-microcontroller-board-with-pmod-headers/",
         "vendor": "Digilent"
@@ -88,8 +85,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-pro-mx4-embedded-systems-trainer-board/",
         "vendor": "Digilent"
@@ -112,8 +108,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-pro-mx7-advanced-peripherals-embedded-systems-trainer-board/",
         "vendor": "Digilent"
@@ -136,8 +131,7 @@
             "maximum_size": 122880,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.element14.com/community/community/knode/dev_platforms_kits/element14_dev_kits/microchip-chipkit/chipkit_pi",
         "vendor": "element14"
@@ -160,8 +154,7 @@
             "maximum_size": 126976,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-cmod-breadboardable-mz-microcontroller-board/",
         "vendor": "Digilent"
@@ -184,8 +177,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.seeedstudio.com/wiki/CUI32Stem",
         "vendor": "SeeedStudio"
@@ -208,8 +200,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.schmalzhaus.com/UBW32/",
         "vendor": "UBW32"
@@ -232,8 +223,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.schmalzhaus.com/UBW32/",
         "vendor": "UBW32"
@@ -256,8 +246,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.pontech.com/productdisplay/uav100",
         "vendor": "PONTECH"
@@ -280,8 +269,7 @@
             "maximum_size": 122880,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-dp32-dip-package-prototyping-microcontroller-board/",
         "vendor": "Digilent"
@@ -304,8 +292,7 @@
             "maximum_size": 122880,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://fubarino.org/mini/",
         "vendor": "Fubarino"
@@ -328,8 +315,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://fubarino.org/sd/index.html",
         "vendor": "Fubarino"
@@ -352,8 +338,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-max32-microcontroller-board-with-mega-r3-headers/",
         "vendor": "Digilent"
@@ -376,8 +361,7 @@
             "maximum_size": 258048,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "https://www.olimex.com/Products/Duino/PIC32/PIC32-PINGUINO/open-source-hardware",
         "vendor": "Olimex"
@@ -400,8 +384,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://www.4dsystems.com.au/product/Picadillo_35T/",
         "vendor": "4DSystems"
@@ -424,8 +407,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://quick240.com/quicki/",
         "vendor": "PONTECH"
@@ -448,8 +430,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-uc32-basic-microcontroller-board-with-uno-r3-headers/",
         "vendor": "Digilent"
@@ -472,8 +453,7 @@
             "maximum_size": 126976,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-uno32-basic-microcontroller-board-retired-see-chipkit-uc32/",
         "vendor": "Digilent"
@@ -496,8 +476,7 @@
             "maximum_size": 520192,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-wf32-wifi-enabled-microntroller-board-with-uno-r3-headers/",
         "vendor": "Digilent"
@@ -520,8 +499,7 @@
             "maximum_size": 2080768,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/chipkit-wi-fire-wifi-enabled-mz-microcontroller-board/",
         "vendor": "Digilent"
@@ -544,8 +522,7 @@
             "maximum_size": 2080768,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://store.digilentinc.com/",
         "vendor": "Digilent"
@@ -568,8 +545,7 @@
             "maximum_size": 122880,
             "protocol": "stk500v2",
             "require_upload_port" : true,
-            "speed": 115200,
-            "wait_for_upload_port": true
+            "speed": 115200
         },
         "url": "http://shop.openbci.com/",
         "vendor": "OpenBCI"

platformio/boards/microduino.json

@@ -132,7 +132,7 @@
             "f_cpu": "16000000L",
             "mcu": "atmega32u4",
             "variant": "32u4",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x8036"]
             ]
         },

platformio/boards/misc.json

@@ -43,6 +43,28 @@
         "vendor": "BitWizard"
     },
 
+    "emonpi": {
+        "build": {
+            "core": "arduino",
+            "extra_flags": "-DARDUINO_ARCH_AVR -DAVR_EMONPI",
+            "f_cpu": "16000000L",
+            "mcu": "atmega328p",
+            "variant": "standard"
+        },
+        "frameworks": ["arduino"],
+        "name": "emonPi",
+        "platform": "atmelavr",
+        "upload": {
+            "maximum_ram_size": 2048,
+            "maximum_size": 30720,
+            "protocol": "arduino",
+            "require_upload_port" : true,
+            "speed": 115200
+        },
+        "url": "https://github.com/openenergymonitor/emonpi",
+        "vendor": "OpenEnergyMonitor"
+    },
+
     "sainSmartDue": {
         "build": {
             "core": "arduino",
@@ -53,7 +75,7 @@
             "usb_product": "Arduino Due",
             "variant": "arduino_due_x",
             "ldscript": "sam3x8e.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x003E"]
             ]
         },
@@ -82,7 +104,7 @@
             "usb_product": "Arduino Due",
             "variant": "arduino_due_x",
             "ldscript": "sam3x8e.ld",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x003E"]
             ]
         },
@@ -326,7 +348,7 @@
             "mcu": "atmega32u4",
             "usb_product": "RedBearLab Blend",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x2341", "0x8036"]
             ]
         },
@@ -355,7 +377,7 @@
             "mcu": "atmega32u4",
             "usb_product": "RedBearLab Blend",
             "variant": "micro",
-            "hwid": [
+            "hwids": [
               ["0x03EB", "0x2404"]
             ]
         },
@@ -384,7 +406,7 @@
             "mcu": "atmega32u4",
             "usb_product": "RedBearLab Blend",
             "variant": "micro",
-            "hwid": [
+            "hwids": [
               ["0x03EB", "0x2404"]
             ]
         },
@@ -435,7 +457,7 @@
             "mcu": "atmega32u4",
             "usb_product": "LightUp",
             "variant": "leonardo",
-            "hwid": [
+            "hwids": [
               ["0x1d50", "0x6096"]
             ]
         },
@@ -531,7 +553,7 @@
             "mcu": "atmega32u4",
             "variant" : "quirkbot",
             "usb_product": "Quirkbot",
-            "hwid": [
+            "hwids": [
               ["0x2886", "0xf004"],
               ["0x2886", "0xf005"],
               ["0x2886", "0xf006"],
@@ -738,5 +760,65 @@
         },
         "url": "http://www.atmel.com/devices/ATTINY85.aspx",
         "vendor": "Generic ATTiny"
+    },
+
+    "arduboy": {
+        "build": {
+            "core": "arduino",
+            "extra_flags": "-DARDUINO_ARCH_AVR -DARDUINO_AVR_ARDUBOY -DARDUBOY_10",
+            "f_cpu": "16000000L",
+            "mcu": "atmega32u4",
+            "usb_product": "Arduboy",
+            "variant": "leonardo",
+            "hwids": [
+              ["0x2341", "0x0036"],
+              ["0x2341", "0x8036"]
+            ]
+        },
+        "frameworks": ["arduino"],
+        "name": "Arduboy",
+        "platform": "atmelavr",
+        "upload": {
+            "disable_flushing": true,
+            "maximum_ram_size": 2560,
+            "maximum_size": 28672,
+            "protocol": "avr109",
+            "require_upload_port" : true,
+            "speed": 57600,
+            "use_1200bps_touch": true,
+            "wait_for_upload_port": true
+        },
+        "url": "https://www.arduboy.com",
+        "vendor": "Arduboy"
+    },
+
+    "arduboy_devkit": {
+        "build": {
+            "core": "arduino",
+            "extra_flags": "-DARDUINO_ARCH_AVR -DARDUINO_AVR_ARDUBOY_DEVKIT -DAB_DEVKIT",
+            "f_cpu": "16000000L",
+            "mcu": "atmega32u4",
+            "usb_product": "Arduboy DevKit",
+            "variant": "leonardo",
+            "hwids": [
+              ["0x2341", "0x0036"],
+              ["0x2341", "0x8036"]
+            ]
+        },
+        "frameworks": ["arduino"],
+        "name": "Arduboy DevKit",
+        "platform": "atmelavr",
+        "upload": {
+            "disable_flushing": true,
+            "maximum_ram_size": 2560,
+            "maximum_size": 28672,
+            "protocol": "avr109",
+            "require_upload_port" : true,
+            "speed": 57600,
+            "use_1200bps_touch": true,
+            "wait_for_upload_port": true
+        },
+        "url": "https://www.arduboy.com",
+        "vendor": "Arduboy"
     }
 }

platformio/boards/sparkfun.json

@@ -28,7 +28,7 @@
             "mcu": "atmega32u4",
             "usb_product": "SparkFun Pro Micro",
             "variant": "sparkfun_promicro",
-            "hwid": [
+            "hwids": [
                 ["0x1B4F", "0x9205"],
                 ["0x1B4F", "0x9206"]
             ]
@@ -57,7 +57,7 @@
             "mcu": "atmega32u4",
             "usb_product": "SparkFun Pro Micro",
             "variant": "sparkfun_promicro",
-            "hwid": [
+            "hwids": [
                 ["0x1B4F", "0x9203"],
                 ["0x1B4F", "0x9204"]
             ]
@@ -86,7 +86,7 @@
             "mcu": "atmega32u4",
             "usb_product": "SparkFun Fio v3",
             "variant": "sparkfun_promicro",
-            "hwid": [
+            "hwids": [
                 ["0x1B4F", "0xF100"],
                 ["0x1B4F", "0xF101"]
             ]
@@ -115,7 +115,7 @@
             "mcu": "atmega32u4",
             "usb_product": "SparkFun MaKey",
             "variant": "sparkfun_promicro",
-            "hwid": [
+            "hwids": [
                 ["0x1B4F", "0x2B74"],
                 ["0x1B4F", "0x2B75"]
             ]

platformio/boards/ststm32.json

@@ -586,6 +586,22 @@
         "url": "https://developer.mbed.org/platforms/ST-Nucleo-L073RZ/",
         "vendor": "ST"
     },
+    "nucleo_l031k6": {
+        "build": {
+            "f_cpu": "32000000L",
+            "cpu": "cortex-m0plus",
+            "mcu": "stm32l031k6t6"
+        },
+        "frameworks": ["mbed"],
+        "name": "ST Nucleo L031K6",
+        "platform": "ststm32",
+        "upload": {
+            "maximum_ram_size": 8192,
+            "maximum_size": 32768
+        },
+        "url": "https://developer.mbed.org/platforms/ST-Nucleo-L031K6/",
+        "vendor": "ST"
+    },
     "seeedArchMax": {
         "build": {
             "f_cpu": "168000000L",

platformio/builder/scripts/atmelavr.py

@@ -22,6 +22,8 @@ from time import sleep
 from SCons.Script import (COMMAND_LINE_TARGETS, AlwaysBuild, Default,
                           DefaultEnvironment, SConscript)
 
+from platformio.util import get_serialports
+
 
 def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
 
@@ -47,27 +49,30 @@ def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
     env.AutodetectUploadPort()
     env.Append(UPLOADERFLAGS=["-P", '"$UPLOAD_PORT"'])
 
-    if env.subst("$BOARD") == "raspduino":
+    if env.subst("$BOARD") in ("raspduino", "emonpi"):
 
         def _rpi_sysgpio(path, value):
             with open(path, "w") as f:
                 f.write(str(value))
 
-        _rpi_sysgpio("/sys/class/gpio/export", 18)
-        _rpi_sysgpio("/sys/class/gpio/gpio18/direction", "out")
-        _rpi_sysgpio("/sys/class/gpio/gpio18/value", 1)
+        pin_num = 18 if env.subst("$BOARD") == "raspduino" else 4
+        _rpi_sysgpio("/sys/class/gpio/export", pin_num)
+        _rpi_sysgpio("/sys/class/gpio/gpio%d/direction" % pin_num, "out")
+        _rpi_sysgpio("/sys/class/gpio/gpio%d/value" % pin_num, 1)
         sleep(0.1)
-        _rpi_sysgpio("/sys/class/gpio/gpio18/value", 0)
-        _rpi_sysgpio("/sys/class/gpio/unexport", 18)
+        _rpi_sysgpio("/sys/class/gpio/gpio%d/value" % pin_num, 0)
+        _rpi_sysgpio("/sys/class/gpio/unexport", pin_num)
     else:
         if not upload_options.get("disable_flushing", False):
             env.FlushSerialBuffer("$UPLOAD_PORT")
 
+        before_ports = get_serialports()
+
         if upload_options.get("use_1200bps_touch", False):
             env.TouchSerialPort("$UPLOAD_PORT", 1200)
 
         if upload_options.get("wait_for_upload_port", False):
-            env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort())
+            env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort(before_ports))
 
 
 env = DefaultEnvironment()
@@ -144,10 +149,9 @@ AlwaysBuild(upload)
 # Target: Upload EEPROM data (from EEMEM directive)
 #
 
-uploadeep = env.Alias(
-    "uploadeep",
-    env.ElfToEep(join("$BUILD_DIR", "firmware"), target_elf),
-    [BeforeUpload, "$UPLOADEEPCMD"])
+uploadeep = env.Alias("uploadeep",
+                      env.ElfToEep(join("$BUILD_DIR", "firmware"), target_elf),
+                      [BeforeUpload, "$UPLOADEEPCMD"])
 AlwaysBuild(uploadeep)
 
 #

platformio/builder/scripts/atmelsam.py

@@ -21,10 +21,10 @@ from os.path import basename, join
 from SCons.Script import (COMMAND_LINE_TARGETS, AlwaysBuild, Default,
                           DefaultEnvironment, SConscript)
 
+from platformio.util import get_serialports
+
 
 def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
-    env.AutodetectUploadPort()
-
     board_type = env.subst("$BOARD")
     if "zero" not in board_type:
         env.Append(
@@ -39,11 +39,13 @@ def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
     if not upload_options.get("disable_flushing", False):
         env.FlushSerialBuffer("$UPLOAD_PORT")
 
+    before_ports = get_serialports()
+
     if upload_options.get("use_1200bps_touch", False):
         env.TouchSerialPort("$UPLOAD_PORT", 1200)
 
     if upload_options.get("wait_for_upload_port", False):
-        env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort())
+        env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort(before_ports))
 
     # use only port name for BOSSA
     if "/" in env.subst("$UPLOAD_PORT"):
@@ -172,8 +174,9 @@ AlwaysBuild(target_size)
 if env.subst("$BOARD") == "zero":
     upload = env.Alias(["upload", "uploadlazy"], target_firm, "$UPLOADCMD")
 else:
-    upload = env.Alias(["upload", "uploadlazy"], target_firm,
-                       [BeforeUpload, "$UPLOADCMD"])
+    upload = env.Alias(
+        ["upload", "uploadlazy"], target_firm,
+        [env.AutodetectUploadPort, BeforeUpload, "$UPLOADCMD"])
 
 AlwaysBuild(upload)
 

platformio/builder/scripts/espressif.py

@@ -346,7 +346,7 @@ AlwaysBuild(target_size)
 
 target_upload = env.Alias(
     ["upload", "uploadlazy", "uploadfs"], target_firm,
-    [lambda target, source, env: env.AutodetectUploadPort(), "$UPLOADCMD"])
+    [env.AutodetectUploadPort, "$UPLOADCMD"])
 env.AlwaysBuild(target_upload)
 
 

platformio/builder/scripts/frameworks/arduino.py

@@ -179,8 +179,8 @@ ARDUINO_VERSION = int(
 ARDUINO_USBDEFINES = []
 if "usb_product" in BOARD_BUILDOPTS:
     ARDUINO_USBDEFINES = [
-        "USB_VID=${BOARD_OPTIONS['build']['hwid'][0][0]}",
-        "USB_PID=${BOARD_OPTIONS['build']['hwid'][0][1]}",
+        "USB_VID=${BOARD_OPTIONS['build']['hwids'][0][0]}",
+        "USB_PID=${BOARD_OPTIONS['build']['hwids'][0][1]}",
         'USB_PRODUCT=\\"%s\\"' % (env.subst(
             "${BOARD_OPTIONS['build']['usb_product']}").replace('"', "")),
         'USB_MANUFACTURER=\\"%s\\"' % (env.subst(

platformio/builder/scripts/frameworks/mbed.py

@@ -71,7 +71,7 @@ MBED_VARIANTS = {
     "samr21_xpro": "SAMR21G18A",
     "saml21_xpro_b": "SAML21J18A",
     "samd21_xpro": "SAMD21J18A",
-    "bbcmicrobit": "NRF51822"
+    "bbcmicrobit": "NRF51_MICROBIT"
 }
 
 MBED_LIBS_MAP = {
@@ -149,6 +149,18 @@ def add_mbedlib(libname, libar):
         if (not any(f.endswith(".h") for f in files) and
                 basename(root) not in sysincdirs):
             continue
+
+        target_includes = (
+            "TARGET_%s" % env.get(
+                "BOARD_OPTIONS", {}).get("vendor", "").upper(),
+            "TARGET_%s" % variant,
+            "TARGET_CORTEX_M"
+        )
+
+        if "TARGET_" in root:
+            if all([p not in root.upper() for p in target_includes]):
+                continue
+
         var_dir = join("$BUILD_DIR", "FrameworkMbed%sInc%d" %
                        (libname.upper(), crc32(root)))
         if var_dir in env.get("CPPPATH"):

platformio/builder/scripts/intel_arc32.py

@@ -21,20 +21,6 @@ from os.path import join
 from SCons.Script import (COMMAND_LINE_TARGETS, AlwaysBuild, Builder, Default,
                           DefaultEnvironment)
 
-
-def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
-
-    if "program" in COMMAND_LINE_TARGETS:
-        return
-
-    env.AutodetectUploadPort()
-    env.Prepend(UPLOADERFLAGS=['"$UPLOAD_PORT"'])
-
-    if env.get("BOARD_OPTIONS", {}).get("upload", {}).get(
-            "use_1200bps_touch", False):
-        env.TouchSerialPort("$UPLOAD_PORT", 1200)
-
-
 env = DefaultEnvironment()
 
 env.Replace(
@@ -112,8 +98,11 @@ env.Replace(
     SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES',
 
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-arduino101load", "arduino101load"),
+    UPLOADERFLAGS=[
+        '"$UPLOAD_PORT"'
+    ],
     DFUUTIL=join("$PIOPACKAGES_DIR", "tool-arduino101load", "dfu-util"),
-    UPLOADCMD='"$UPLOADER" $DFUUTIL $SOURCES $UPLOADERFLAGS verbose',
+    UPLOADCMD='"$UPLOADER" "$DFUUTIL" $SOURCES $UPLOADERFLAGS verbose',
 
     PROGNAME="firmware",
     PROGSUFFIX=".elf"
@@ -189,8 +178,8 @@ AlwaysBuild(target_size)
 # Target: Upload firmware
 #
 
-upload = env.Alias(
-    ["upload", "uploadlazy"], target_firm, [BeforeUpload, "$UPLOADCMD"])
+upload = env.Alias(["upload", "uploadlazy"], target_firm,
+                   [env.AutodetectUploadPort, "$UPLOADCMD"])
 AlwaysBuild(upload)
 
 #

platformio/builder/scripts/microchippic32.py

@@ -21,12 +21,6 @@ from os.path import join
 from SCons.Script import (COMMAND_LINE_TARGETS, AlwaysBuild, Builder, Default,
                           DefaultEnvironment)
 
-
-def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
-
-    env.AutodetectUploadPort()
-    env.Prepend(UPLOADERFLAGS=["-d", '"$UPLOAD_PORT"'])
-
 env = DefaultEnvironment()
 
 env.Replace(
@@ -86,7 +80,8 @@ env.Replace(
 
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-pic32prog", "pic32prog"),
     UPLOADERFLAGS=[
-        "-b", "$UPLOAD_SPEED"
+        "-b", "$UPLOAD_SPEED",
+        "-d", '"$UPLOAD_PORT"'
     ],
     UPLOADCMD='"$UPLOADER" $UPLOADERFLAGS $SOURCES',
 
@@ -179,8 +174,8 @@ AlwaysBuild(target_size)
 # Target: Upload firmware
 #
 
-upload = env.Alias(
-    ["upload", "uploadlazy"], target_firm, [BeforeUpload, "$UPLOADCMD"])
+upload = env.Alias(["upload", "uploadlazy"], target_firm,
+                   [env.AutodetectUploadPort, "$UPLOADCMD"])
 AlwaysBuild(upload)
 
 #

platformio/builder/scripts/nordicnrf51.py

@@ -63,9 +63,8 @@ AlwaysBuild(target_size)
 #
 
 if env.subst("$BOARD") == "rfduino":
-    upload = env.Alias(
-        ["upload", "uploadlazy"], target_firm,
-        [lambda target, source, env: env.AutodetectUploadPort(), "$UPLOADCMD"])
+    upload = env.Alias(["upload", "uploadlazy"], target_firm,
+                       [env.AutodetectUploadPort, "$UPLOADCMD"])
 else:
     upload = env.Alias(["upload", "uploadlazy"], target_firm, env.UploadToDisk)
 AlwaysBuild(upload)

platformio/builder/scripts/nxplpc.py

@@ -17,19 +17,10 @@
 """
 
 from os.path import join
-from shutil import copyfile
 
 from SCons.Script import (COMMAND_LINE_TARGETS, AlwaysBuild, Default,
                           DefaultEnvironment, SConscript)
 
-
-def UploadToDisk(target, source, env):  # pylint: disable=W0613,W0621
-    env.AutodetectUploadPort()
-    copyfile(join(env.subst("$BUILD_DIR"), "firmware.bin"),
-             join(env.subst("$UPLOAD_PORT"), "firmware.bin"))
-    print("Firmware has been successfully uploaded.\n"
-          "Please restart your board.")
-
 env = DefaultEnvironment()
 
 SConscript(env.subst(join("$PIOBUILDER_DIR", "scripts", "basearm.py")))
@@ -60,7 +51,7 @@ AlwaysBuild(target_size)
 # Target: Upload by default .bin file
 #
 
-upload = env.Alias(["upload", "uploadlazy"], target_firm, UploadToDisk)
+upload = env.Alias(["upload", "uploadlazy"], target_firm, env.UploadToDisk)
 AlwaysBuild(upload)
 
 #

platformio/builder/scripts/ststm32.py

@@ -100,8 +100,7 @@ AlwaysBuild(target_size)
 #
 
 if "mbed" in env.subst("$FRAMEWORK") and not env.subst("$UPLOAD_PROTOCOL"):
-    upload = env.Alias(["upload", "uploadlazy"],
-                       target_firm, env.UploadToDisk)
+    upload = env.Alias(["upload", "uploadlazy"], target_firm, env.UploadToDisk)
 else:
     upload = env.Alias(["upload", "uploadlazy"], target_firm, "$UPLOADCMD")
 AlwaysBuild(upload)

platformio/builder/tools/pioupload.py

@@ -14,13 +14,15 @@
 
 from __future__ import absolute_import
 
+from os import environ
 from os.path import isfile, join
+from platform import system
 from shutil import copyfile
 from time import sleep
 
 from serial import Serial
 
-from platformio.util import get_logicaldisks, get_serialports, get_systype
+from platformio import util
 
 
 def FlushSerialBuffer(env, port):
@@ -35,7 +37,7 @@ def FlushSerialBuffer(env, port):
 
 
 def TouchSerialPort(env, port, baudrate):
-    if "windows" not in get_systype():
+    if system() != "Windows":
         try:
             s = Serial(env.subst(port))
             s.close()
@@ -47,22 +49,28 @@ def TouchSerialPort(env, port, baudrate):
     sleep(0.4)
 
 
-def WaitForNewSerialPort(env):
-    before = [i['port'] for i in get_serialports(use_grep=True)]
-    sleep(0.5)
+def WaitForNewSerialPort(env, before):
+    print "Waiting for the new upload port..."
+    prev_port = env.subst("$UPLOAD_PORT")
     new_port = None
     elapsed = 0
-    while elapsed < 10:
-        now = [i['port'] for i in get_serialports(use_grep=True)]
-        diff = list(set(now) - set(before))
-        if diff:
-            new_port = diff[0]
-            break
-
+    sleep(1)
+    while elapsed < 5 and new_port is None:
+        now = util.get_serialports()
+        for p in now:
+            if p not in before:
+                new_port = p['port']
+                break
         before = now
         sleep(0.25)
         elapsed += 0.25
 
+    if not new_port:
+        for p in now:
+            if prev_port == p['port']:
+                new_port = p['port']
+                break
+
     if not new_port:
         env.Exit("Error: Couldn't find a board on the selected port. "
                  "Check that you have the correct port selected. "
@@ -72,31 +80,52 @@ def WaitForNewSerialPort(env):
     return new_port
 
 
-def AutodetectUploadPort(env):
-    if "UPLOAD_PORT" in env:
-        return
+def AutodetectUploadPort(*args, **kwargs):  # pylint: disable=unused-argument
+    env = args[0]
+    print "Looking for upload port/disk..."
 
-    if env.subst("$FRAMEWORK") == "mbed":
+    def _look_for_mbed_disk():
         msdlabels = ("mbed", "nucleo", "frdm")
-        for item in get_logicaldisks():
+        for item in util.get_logicaldisks():
             if (not item['name'] or
                     not any([l in item['name'].lower() for l in msdlabels])):
                 continue
-            env.Replace(UPLOAD_PORT=item['disk'])
-            break
-    else:
-        board_build_opts = env.get("BOARD_OPTIONS", {}).get("build", {})
-        for item in get_serialports():
+            return item['disk']
+        return None
+
+    def _look_for_serial_port():
+        port = None
+        board_hwids = env.get("BOARD_OPTIONS", {}).get(
+            "build", {}).get("hwids", [])
+        for item in util.get_serialports():
             if "VID:PID" not in item['hwid']:
                 continue
-            env.Replace(UPLOAD_PORT=item['port'])
-            for hwid in board_build_opts.get("hwid", []):
-                board_hwid = ("%s:%s" % (hwid[0], hwid[1])).replace("0x", "")
-                if board_hwid in item['hwid']:
-                    break
+            port = item['port']
+            for hwid in board_hwids:
+                hwid_str = ("%s:%s" % (hwid[0], hwid[1])).replace("0x", "")
+                if hwid_str in item['hwid']:
+                    return port
+        return port
 
     if "UPLOAD_PORT" in env:
-        print "Auto-detected UPLOAD_PORT/DISK: %s" % env['UPLOAD_PORT']
+        print env.subst("Manually specified: $UPLOAD_PORT")
+        return
+
+    if env.subst("$FRAMEWORK") == "mbed":
+        env.Replace(UPLOAD_PORT=_look_for_mbed_disk())
+    else:
+        if (system() == "Linux" and
+                not isfile("/etc/udev/99-platformio-udev.rules")):
+            print(
+                "\nWarning! Please install `99-platformio-udev.rules` and "
+                "check that your board's PID and VID are listed in the rules."
+                "\n https://raw.githubusercontent.com/platformio/platformio"
+                "/develop/scripts/99-platformio-udev.rules\n"
+            )
+        env.Replace(UPLOAD_PORT=_look_for_serial_port())
+
+    if env.subst("$UPLOAD_PORT"):
+        print env.subst("Auto-detected: $UPLOAD_PORT")
     else:
         env.Exit("Error: Please specify `upload_port` for environment or use "
                  "global `--upload-port` option.\n"
@@ -117,6 +146,30 @@ def UploadToDisk(_, target, source, env):  # pylint: disable=W0613,W0621
           "Please restart your board.")
 
 
+def CheckUploadSize(_, target, source, env):  # pylint: disable=W0613,W0621
+    max_size = int(env.get("BOARD_OPTIONS", {}).get("upload", {}).get(
+        "maximum_size", 0))
+    if max_size == 0 or "SIZETOOL" not in env:
+        return
+
+    print "Check program size..."
+    sysenv = environ.copy()
+    sysenv['PATH'] = str(env['ENV']['PATH'])
+    cmd = [env.subst("$SIZETOOL"), "-B", str(source[0])]
+    result = util.exec_command(cmd, env=sysenv)
+    if result['returncode'] != 0:
+        return
+    print result['out'].strip()
+
+    line = result['out'].strip().splitlines()[1]
+    values = [v.strip() for v in line.split("\t")]
+    used_size = int(values[0]) + int(values[1])
+
+    if used_size > max_size:
+        env.Exit("Error: The program size (%d bytes) is greater "
+                 "than maximum allowed (%s bytes)" % (used_size, max_size))
+
+
 def exists(_):
     return True
 
@@ -127,4 +180,5 @@ def generate(env):
     env.AddMethod(WaitForNewSerialPort)
     env.AddMethod(AutodetectUploadPort)
     env.AddMethod(UploadToDisk)
+    env.AddMethod(CheckUploadSize)
     return env

platformio/builder/tools/platformio.py

@@ -35,6 +35,11 @@ SRC_DEFAULT_FILTER = " ".join([
 
 def BuildProgram(env):
 
+    env.Append(
+        CPPDEFINES=["PLATFORMIO={0:02d}{1:02d}{2:02d}".format(
+            *pioversion_to_intstr())],
+    )
+
     # fix ASM handling under non-casitive OS
     if not case_sensitive_suffixes(".s", ".S"):
         env.Replace(
@@ -78,8 +83,6 @@ def BuildProgram(env):
     env.ProcessFlags([env.get("SRC_BUILD_FLAGS", None)])
 
     env.Append(
-        CPPDEFINES=["PLATFORMIO={0:02d}{1:02d}{2:02d}".format(
-            *pioversion_to_intstr())],
         CPPPATH=["$PROJECTSRC_DIR"],
         LIBS=deplibs,
         LIBPATH=["$BUILD_DIR"]
@@ -94,11 +97,16 @@ def BuildProgram(env):
             "Error: Nothing to build. Please put your source code files "
             "to '%s' folder" % env.subst("$PROJECTSRC_DIR"))
 
-    return env.Program(
+    program = env.Program(
         join("$BUILD_DIR", env.subst("$PROGNAME")),
         sources
     )
 
+    if set(["upload", "uploadlazy", "program"]) & set(COMMAND_LINE_TARGETS):
+        env.AddPostAction(program, env.CheckUploadSize)
+
+    return program
+
 
 def ProcessFlags(env, flags):
     for f in flags:
@@ -114,10 +122,11 @@ def ProcessFlags(env, flags):
             env.Append(CPPDEFINES=[flag])
         env.Append(**parsed_flags)
 
-    # fix relative CPPPATH
-    for i, p in enumerate(env.get("CPPPATH", [])):
-        if isdir(p):
-            env['CPPPATH'][i] = realpath(p)
+    # fix relative CPPPATH & LIBPATH
+    for k in ("CPPPATH", "LIBPATH"):
+        for i, p in enumerate(env.get(k, [])):
+            if isdir(p):
+                env[k][i] = realpath(p)
     # fix relative path for "-include"
     for i, f in enumerate(env.get("CCFLAGS", [])):
         if isinstance(f, tuple) and f[0] == "-include":

platformio/util.py

@@ -280,34 +280,7 @@ def exec_command(*args, **kwargs):
     return result
 
 
-def get_serialports(use_grep=False):
-
-    def _grep_serial_ports():
-        result = []
-        if system() == "Windows":
-            output = exec_command(["mode"]).get("out", "")
-            for line in output.split("\n"):
-                line = line.strip()
-                if "COM" in line:
-                    result.append({"port": line[line.index("COM"):-1],
-                                   "description": "", "hwid": ""})
-        else:
-            if system() == "Linux":
-                patterns = ["/dev/%s*" % p for p in (
-                    "ttyS", "ttyUSB", "ttyACM", "ttyAMA", "rfcomm", "ttyO")]
-            else:
-                patterns = ["/dev/tty.*", "/dev/cu.*"]
-            for pattern in patterns:
-                for port in glob(pattern):
-                    result.append(
-                        {"port": port, "description": "", "hwid": ""})
-        return result
-
-    if use_grep:
-        result = _grep_serial_ports()
-        if result:
-            return result
-
+def get_serialports():
     try:
         from serial.tools.list_ports import comports
     except ImportError:
@@ -325,9 +298,9 @@ def get_serialports(use_grep=False):
         result.append({"port": p, "description": d, "hwid": h})
 
     # fix for PySerial
-    if not result and not use_grep:
-        result = _grep_serial_ports()
-
+    if not result and system() == "Darwin":
+        for p in glob("/dev/tty.*"):
+            result.append({"port": p, "description": "n/a", "hwid": "n/a"})
     return result
 
 

scripts/99-platformio-udev.rules

@@ -45,8 +45,15 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="066
 # QinHeng Electronics HL-340 USB-Serial adapter
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666"
 
-# ARDUINO UNO
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0043", MODE:="0666"
+# Arduino boards
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][02]*", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666"
+
+# Arduino SAM-BA
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", ENV{ID_MM_DEVICE_IGNORE}="1"
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", ENV{MTP_NO_PROBE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666"
+KERNEL=="ttyACM*", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666"
 
 # Digistump boards
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666"