With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
If we don't set it, we shouldn't delete it, either. The QML slave
engine will handle that.
Change-Id: Idef54e6bbb4124ed195d88a367ef07c9bb8f6b3d
Reviewed-by: hjk <hjk@theqtcompany.com>
Now it is closer to its only user and possibly reusable for no-QML uses
there. We also drop the QML/JS syntax checker. The application being
debugged can already tell us about syntax errors. There is no need to
duplicate that functionality.
Change-Id: I2ba151f9f4c854c6119ba5462c21be40bddcebf9
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
There are two cases that do not coincide in asynchronous
engines such as the QmlEngine: Inserting a new watch item,
and expanding the children of an existing item.
Change-Id: Ic98a5f1e89aca37146039a241de737c407606e83
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
It's again a linear process now, with explicit entrance point for
all users.
Task-number: QTCREATORBUG-14618
Change-Id: I96c08947270ce34d7bc6c8be1d7f350dbfa14794
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
There are now several possible orders of events between sending a 'kill'
and receiving something that indicated a properly shut down inferior.
Coordinating the InferiorExited state during engine ramp down is not
worthwhile as that state had only a forced transition to InferiorShutdownOk
anyway. For the user (and user code), only the fact that ramp down is
finished is interesting.
Change-Id: Ic22131d5a1066dc62bd069f532c28b773f231088
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This splits the bool setToolTipExpression() operation into
a bool canHandleToolTip(), and the actual processing of
the request, which is mostly identical to the handling of
a watcher.
Handling a watcher is now mostly the same as a full Locals
update, except for the 'partial' flag. Pushing the handling
of that down to the bridges gives identical code paths
in the gdb and lldbengine. Move that to the
DebuggerEngine base class.
Change-Id: I3861b43e8630c7e7bd57fcd549b2a2387e3d4869
Reviewed-by: hjk <hjk@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Right now, DebuggerStartParameter is part of the debugger plugin
external interface. Better not make it fatter than necessary.
Change-Id: I3b9205089f971dd314ccba1335b5ca2d4d9fe7c6
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
... in WatchHandler and DebuggerEngine interface.
Adjust using code.
Change-Id: I6371f3e96ba46a783e23a5767cdde24a10d3fce7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
The only information ever used is whether it's c++ or not.
Change-Id: I4ca00663856dd66cbdf58c468f175a8c9e41d6a5
Reviewed-by: hjk <hjk@theqtcompany.com>
Only needed in the non-Python days. CDB didn't use it to start with.
Change-Id: Ia609218cc1a694f797e278c4d99ead68e6212938
Reviewed-by: hjk <hjk@theqtcompany.com>
Seeing an ill engine while trying to stop means that the stop failed.
Also, a finished master engine doesn't need further updates.
Task-number: QTCREATORBUG-14089
Change-Id: Icd5b090dfcdc0875953d8756a909b1405e05f71f
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... prominently with red color in the log.
Change-Id: Id9d86227bbcc269a0870ff93e372f28ab4b2618b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The secondSlaveEngineType was not really used, and the first
either NoEngineType or identical to the cppEngineType.
Change-Id: I1725728ca38636f228ff9b9d8ca7d643a34c64e8
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The actual data is now in a TreeModel. As interface to
individual breakpoints there's a new Breakpoint class
essentially providing a checked handle.
On the user code side breakHandler()->foo(bpId) is
replaced by bp.foo().
Change-Id: I82f435bad6301fce85a1d82bf6bf39e9ddba511e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Use register names as handle, not their index in the view.
Store the raw real values, not some stringified version
as primary data. Use subentries to break down bigger
registers into smaller entities. Also remember the
previous value of a register and show it in a tooltip.
Change-Id: I8ae3cc8766a7b211bc7cc827c734e5cf6060825c
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Has not been usable for a while and will be superseded by
"native" mixed stepping.
Change-Id: I2902a98b7ad4e4b29e389e54fb6488bf711840dd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Export factory, de-export plugin, to remove one indirection
Change-Id: I13a46460d07d5ded6b26f2b5ceccd01142fb10e8
Reviewed-by: Christian Stenger <christian.stenger@digia.com>
... and some of the related implementation details
Change-Id: I1f03aa5acf2d3fb2cfc2a6a7845f3d3578b0408d
Reviewed-by: David Schulz <david.schulz@digia.com>
No need for a pimpl containing three pointers in an
internal class.
Change-Id: Iabafa5da4a684099cbfd3e945a642929a2cecf50
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
A lot of our build system files specify unneeded include
paths. These roughly fall into the following categories:
a) Paths that are already set in more general files
such as qtcreator.pri.
b) Paths that serve no purpose at all, possibly
left over from earlier versions of the project.
c) Paths that act as workarounds for wrong include
statements of the form '#include "xyz.h"', where
xyz.h is not in the same directory as the including
file.
This patch removes such path specifications and fixes the offending
include statements from case c).
Tested on Linux, Windows and OSX with qmake and qbs.
Change-Id: I039a8449f8a65df0d616b4c08081145c18ae4b15
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In mixed debugging, QML debugger is the slave engine. Continue
debugging with the master engine i.e. Cpp engine even if the
slave engine fails. The slave engine may fail when the application
is not set up for QML/JS debugging or when there are insufficient
available ports etc.
Task-number: QTCREATORBUG-9836
Change-Id: I2549196413c839e660925fe2edb3182e6848b5fc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
