This combines two of the previous three paths to create run workers,
and refers to RunConfigurations by id, not by type where possible
to decrease coupling between the classes.
Only allow "type of run configuration" and "type of device"
as the only possible kind of restriction and require a uniform
RunWorker constructor signature.
Adapt user code to fit that pattern.
Change-Id: I5a6d49c9a144785fd0235d7586f244b56f67b366
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... taking a QString for the executable.
This weakens the very explicit QString -> FileName conversion via the
named constructors for the special case of constructing a CommandLine.
I think that's worthwhile here, as it reduces the noise on the caller
site under circumstance where the nature of the thing is obvious.
Change-Id: I27b4a73639728893d053b2e7ba65cb745f0ffe83
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The valgrind parser might be used on Windows and if a
device has Windows line endings it might end up with
wrong data.
Handle the additional line ending character if present.
Change-Id: Ia86fa88f78b40e77e6236ed6769820e074a95db6
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The original idea was to make that use Utils::FilePath, but it looks
like the code is not ready for that yet.
Change-Id: Ib5466257049675fcbf19abd115ba58a78b45e484
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Qt 6 API will move away from it.
Use QVector for API and some std container for internal things.
Change-Id: Iff14d48a47d5ac52ade875d9c8c84ad8a4f577d8
Reviewed-by: hjk <hjk@qt.io>
Adds a cache entry "BUILD_PLUGIN_${NAME}", defaulting to ON which
can be set to OFF to disable building of a plugin.
Adds a extend_qtc_plugin function that should be used to add
properties to a plugin after add_qtc_plugin, instead of the
standard CMake functions target_... . The new function results
in a no-op if the plugin was disabled.
Change-Id: I57f6799620aea0aaa8b56acead4815ccced95911
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Based on Tobias Hunger's work from a few months ago.
The CMake configuration needs libclang and Qt paths specified as
CMAKE_PREFIX_PATH.
Auto tests are run with "ctest". At the moment the pass rate is 87%.
Change-Id: Iba98e39bf22077d52706dce6c85986be67a6eab0
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
External data files will be tried to search inside a path
that is specified by the environment variable
QTC_TEST_EXTRADATALOCATION and need to be present inside a
subdirectory called 'valgrind'.
Change-Id: I8f192b2862e4c269ed17b7a81000eb3dabfc2efb
Reviewed-by: hjk <hjk@qt.io>
Bring it more in line with the standard pattern.
Plus some cosmetics.
Change-Id: I2297c4e72892db386c50ece7dc64bdc89f0d9010
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... by two more specialized canRun() / createMainWorker() functions
resulting in somewhat leaner code on the user side and paving the
way for introducing a RunWorkerFactory class intended to follow the
now-canonical way of having factories as members in the plugin pimpl.
Change-Id: Id6fc2043a340203f14ab0b896a8dfa1e298f58a6
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Into a trivial bit and two setters. Plan is to use it only with information
that is truly there (e.g. kit/device only) at the user side without having
to invent a RunConfiguration "handle".
Also remove some dead code in the test runner.
Change-Id: I987881e41722178b14b91f973b84cbdb67a9f85e
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For a long time, probably from the very beginning, a RunControl
was meant to hold (a copy of) data needed for its operation, that was
valid at the time of its construction, to be resilient in cases
where RunConfiguration setting were changed while the RunControl
was running, or to properly re-run with the original settings.
Unfortunately, the task was repetitive, as RunConfiguration
classes had no generic access to properties / "aspects"
and there was was the runConfiguration() accessor (probably
for mostly unrelated reasons in the output pane handling) which
made the idea of just casting that to the original runConfiguration
and access the data directly there appealing, with all the
expected consequences.
This patch here partially addresses the issue by copying some
more of the related data at RunControl construction time and
adjust the using code, avoiding most uses of the runConfiguration()
accessor in a mostly mechanical matter.
Complete removal appears possible, but will be less mechanical
in "difficult" plugins like ios, so this is left for later.
The new accessors in RunControl are very much ad-hoc, leaving
room for improvement, e.g. by consolidating the access to the
run config settings aspects with the other runconfig aspects
or similar. For now the goal is to remove the runConfiguration()
accessor, and to as much as possible fixed data after RunControl
setup is finished.
Next step would be to officially allow construction of RunControls
without a specific RunConfiguration by setting the necessary
data independently, removing the need for the various workarounds
that are currently used for the purpose of faking (parts of) the
effect of the non-existing RunConfiguration or refusing to operate
at all, even if it would be possible.
Change-Id: If8e5596da8422c70e90f97270389adbe6d0b46f2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Mainly to get rid of the QProcess::finished deprecation warning.
Also adjust coding style in the surrounding connects when needed.
Change-Id: I12f9b248c7974b892c4a069356e578e80f8c59e9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
... instead of our own SSH library.
Advantages:
- Full compatibility with OpenSSH behavior guaranteed.
- Minimal maintenance effort.
- Less code to build.
- Big chunk of 3rd party sources can be removed from our repository.
One the downside, Windows users now need to install OpenSSH for
RemoteLinux support. Hoewever, people doing embedded development
probably have it installed anyway.
[ChangeLog] Switched SSH backend to OpenSSH
Fixes: QTCREATORBUG-15744
Fixes: QTCREATORBUG-15807
Fixes: QTCREATORBUG-19306
Fixes: QTCREATORBUG-20210
Change-Id: Ifcfefdd39401e45ba1f4aca35d2c5bf7046c7aab
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
