In most cases, the layout constructed in the builder was set
on a widget which in turn was put into a vbox in the actual
widget. This is not necessary, but needs some re-ordering.
Also make sure that using not-yet-parented widgets during
layout construction does not cause visible artifacts.
Change-Id: I75727a571da093d3131ea6fba467c2c646cdb6f1
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This is a fairly complex use case, as the corresponding widget looks the
same in global settings and Project settings, but behaves differently
(Project only stores a diff, is auto-apply). It also use two(!)
settings keys in the project case.
So while it works, it takes manual help for the cancel/apply and
toMap/fromMap. Looks like there is still some basic infrastructure
missing.
Change-Id: I25ab7b41616ee09ff9133e93b84f34947fc32988
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This is usually used in a wrong or at least misleading way.
Replace most of the usages by newly introduced GeneralMessageFormat
as most of the replaced usages just print to General Messages and
using any of the existing formats would change the layout of the
text. Except for some special debug output inside the valgrind plugin
that can use one of the existing formats which also makes it easier
to spot them and the runners which print QC internal output.
Task-number: QTCREATORBUG-24560
Change-Id: I824dc4250b2f3e4656bab8676b45c98e3407d59c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
And AttachCrashedExternal to AttachToCrashedProcess
And AttachCore to AttachToCore.
Clearer.
Change-Id: I47c2eca5cbdbbc0eb38b9f62b2504c96558ff112
Reviewed-by: David Schulz <david.schulz@qt.io>
It fixes the following warning:
Use Q_ENUM instead of Q_ENUMS [clazy-qenums]
In addition, it amends 8588cf268f
where WidgetStyle got removed.
Change-Id: I4d72dd762a2f18ba8886360b3581b4ef19bf4c5e
Reviewed-by: hjk <hjk@qt.io>
Mark some of them with Q_UNUSED, since it looks like
sometimes the copy is done on purpose, to force detach
or used for some hack with memory management.
In one case make unused variable used again.
Change-Id: I3825cd3399fa63bf6e12173c64509287d4a125e5
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Silence the warning:
warning: comparison of integer expressions of different signedness:
‘const long long unsigned int’ and ‘const long long int’ [-Wsign-compare]
Change-Id: I3e0ace4a9aa354f9c8b30814265e9d7516fbdc7d
Reviewed-by: hjk <hjk@qt.io>
... to applicable analyzers.
Rather than inventing separate shortcut categories for all the
analyzers, we make use of the fact that only one analyzer view is active
at any given time, and make them use the same shortcuts for consistency.
Fixes: QTCREATORBUG-20659
Change-Id: Ifa60080def0e6b32395854cff588ab3af9ea33b9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Fixes build issue with Qt6, for which QStringList is now a
QList<QString>.
Task-number: QTCREATORBUG-24098
Change-Id: I0c81aa5bae413b836dbedea0bb6117b46f6f24c2
Reviewed-by: hjk <hjk@qt.io>
Change from QStringRef to QStringView at various places.
Task-number: QTCREATORBUG-24098
Change-Id: Ia7a634fa26464fbb2962724d5f0e188cecc68801
Reviewed-by: hjk <hjk@qt.io>
- QVector cannot be forward-declared anymore as it is a typedef in Qt 6.
- 64 bit sizes cause warnings in printf("%d")
Task-number: QTCREATORBUG-24098
Change-Id: I75fc2a1113fb7a6e8c298e985eb7eb8d1a4c21b0
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The coreplugin/id.h header is kept for downstream for now.
Change-Id: I8c44590f7b988b3770ecdc177c40783e12353e66
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
There are very few reasons to use mainWindow() directly.
Especially for modal dialogs, using dialogParent() is important, since
that guarantees the stacking order in case of other dialogs currently
being open.
Change-Id: I7ad2c23c5034b43195eb35cfe405932a7ea003e6
Reviewed-by: hjk <hjk@qt.io>
Keep the old method for now to ease downstream porting.
The change is kept mechanical, there's a lot of cleanup possible now
on the user code side.
Change-Id: I936baedd45b7ba057f1c789a1bec896886f48eff
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
QSortFilterProxyModel::filterRegExp is going to go away in Qt6,
so port over to use QRegularExpression instead.
This required some changes where setFilterWildcard/FixedString()
was being used, as those would instantiate QRegExp based filters
in Qt 5, and will use QRegularExpression in Qt 6. Use the generic
setFilterRegularExpression here, to keep things portable between
5 and 6.
Change-Id: I6379be781aa3821b10ba783c088f82c1a0970911
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Add Cmd+Shift+- for decreasing font size on macOS.
Do not add Cmd+= for increasing size, because it conflicts with the
existing shortcut for "Replace and Find Next".
Sprinkle some Backspace shortcuts in addition to Delete for removing
items. There are (laptop) keyboards that either do not have a designated
Delete key (requiring Fn+Backspace) or where the Delete key is not
conveniently located/sized, and there is no benefit in making the
distinction in that case anyhow.
Fixes: QTCREATORBUG-706
Fixes: QTCREATORBUG-13733
Change-Id: I06274a9810b82800ec6158a883c95d2a7ae2465e
Reviewed-by: David Schulz <david.schulz@qt.io>
This enforces a linear pass through
[static] ProjectExplorerPlugin::updateRunActions
ProjectExplorerPluginPrivate::doUpdateRunAction
[emit] ProjectExplorerPluginPrivate::runActionsUpdated
instead of the previous direct emission of the signal from
user code and connecting also the internal update to it.
This is meant to simplify reasoning about execution order and
maybe to help elimimating double executation.
Change-Id: Id8cc41a46d9dec06afb5514855f2ae80560f3695
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Do set the global application flag AA_DisableWindowContextHelpButton
to avoid having to unset the default WindowContextHelpButtonHint
in every single dialog.
AA_DisableWindowContextHelpButton was added in Qt 5.10.
Change-Id: I21fe8bc5ddfa4c01ec7a799b04bfb6ff1c9d6d86
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
So far it was only possible to combine TextEditorFactory, BaseTextEditor
and TextEditorWidget directly.
That TextEditorWidget is also directly a QPlainTextEdit made it
impossible to "decorate" the text editor widget with something else
without a lot of effort.
Make it possible to create a text editor factory that returns an
arbitrary widget, as long as it can be "cast" to a TextEditorWidget with
either qobject_cast or Aggregation::query. That way the TextEditorWidget
instance can be attached to the editor widget via Aggregation.
Adapt other code that accesses TextEditorWidget from editors
accordingly. Introduce a common method how to do that.
Change-Id: I72b8721f3a8a8d8281c39af75253e9c80cbe1250
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: David Schulz <david.schulz@qt.io>
New icon is: Utils::Icons::RELOAD. And the toolbar variant is now
Utils::Icons::RELOAD_TOOLBAR.
Change-Id: I811d83c7340a717968430ac1ce4a5c708c8ddcf9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
