feedc0de/wolfssl
1
0
Fork 0
forked from wolfSSL/wolfssl
Code Pull Requests Activity

adds initial doc files

Browse Source
This commit is contained in:
Moisés Guimarães
2017-01-31 14:00:59 -03:00
parent a761a7fc64
commit 00a74d0da4
11 changed files with 624 additions and 92 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
wrapper/python/wolfssl/LICENSING.rst
View File

@@ -1,12 +1,12 @@
Licensing
---------
=========
wolfSSL’s software is available under two distinct licensing models:
open source and standard commercial licensing. Please see the relevant
section below for information on each type of license.
Open Source
~~~~~~~~~~~
-----------
wolfCrypt and wolfSSL software are free software downloads and may be modified
to the needs of the user as long as the user adheres to version two of the GPL
@@ -14,7 +14,7 @@ License. The GPLv2 license can be found on the `gnu.org website
<http://www.gnu.org/licenses/old-licenses/gpl-2.0.html>`_.
Commercial Licensing
~~~~~~~~~~~~~~~~~~~~
--------------------
Businesses and enterprises who wish to incorporate wolfSSL products into
proprietary appliances or other commercial software products for

5
wrapper/python/wolfssl/Makefile
View File

@@ -18,7 +18,7 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
.PHONY : all clean clean-build clean-pyc clean-test install test upload
.PHONY : all clean clean-build clean-pyc clean-test install test docs upload
# builds the module
all :
@@ -53,6 +53,9 @@ check : test
test : clean-pyc
tox
docs :
$(MAKE) -C docs singlehtml
# publishes module at pypi
upload : test
python ./setup.py sdist upload

126
wrapper/python/wolfssl/README.rst
View File

@@ -1,40 +1,33 @@
Welcome
=======
wolfssl: the wolfSSL Inc. SSL/TLS library
=========================================
**wolfssl Python**, a.k.a. ``wolfssl`` is a Python library that encapsulates
**wolfSSL's C SSL/TLS library**.
`wolfssl <https://wolfssl.com/wolfSSL/Products-wolfssl.html>`_ is a
lightweight C-language-based SSL/TLS library targeted for embedded, RTOS, or
``wolfssl Python`` is a Python module that encapsulates ``wolfssl C``, a `lightweight C-language-based SSL/TLS library <https://wolfssl.com/wolfSSL/Products-wolfssl.html>`_ targeted for embedded, RTOS, or
resource-constrained environments primarily because of its small size, speed,
and portability. wolfSSL supports industry standards up to the current TLS 1.2
and DTLS 1.2 levels, is up to 20 times smaller than OpenSSL,
lightweight, portable, C-language-based crypto library offers a simple API, an
OpenSSL compatibility layer, OCSP and CRL support, and offers several
progressive ciphers.
and portability.
Installation
------------
============
In order to use ``wolfssl``, first you'll need to install ``wolfssl`` C
embedded SSL/TLS library.
In order to use ``wolfssl Python``, you'll also need to install ``wolfssl C``.
Installing ``wolfssl`` C SSL/TLS library:
~~~~~~~~~~~~~~~~~~~~~~~~
Mac OSX
-------
**Mac OSX**
Installing from ``homebrew`` and ``pip`` package managers:
.. code-block:: console
.. code-block:: shell
# wolfssl C installation
brew install wolfssl
or
# wolfssl Python installation
sudo -H pip install wolfssl
.. code-block:: console
Installing from ``source code``:
.. code-block:: shell
# wolfssl C installation
git clone https://github.com/wolfssl/wolfssl.git
cd wolfssl/
./autogen.sh
@@ -42,14 +35,22 @@ or
make
sudo make install
# wolfssl Python installation
cd wrapper/python/wolfssl
sudo make install
**Ubuntu**
.. code-block:: console
Linux
-----
.. code-block:: shell
# dependencies installation
sudo apt-get update
sudo apt-get install -y git autoconf libtool
sudo apt-get install -y python-dev python3-dev python-pip libffi-dev
# wolfssl C installation
git clone https://github.com/wolfssl/wolfssl.git
cd wolfssl/
./autogen.sh
@@ -59,86 +60,35 @@ or
sudo ldconfig
**CentOS**
.. code-block:: console
sudo rpm -ivh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-6.noarch.rpm
sudo yum update
sudo yum install -y git autoconf libtool
git clone git@github.com:wolfssl/wolfssl.git
cd wolfssl
./autogen.sh
./configure --enable-sha512
make
sudo make install
echo /usr/local/lib > wolfssl.conf
sudo mv wolfssl.conf /etc/ld.so.conf
sudo ldconfig
Installing ``wolfssl`` python module:
~~~~~~~~~~~~~~~~~~~~~~~~~~
**Mac OSX**
.. code-block:: console
# wolfssl Python installation
sudo -H pip install wolfssl
**Ubuntu**
Testing
=======
.. code-block:: console
sudo apt-get install -y python-dev python3-dev python-pip libffi-dev
sudo -H pip install wolfssl
**CentOS**
.. code-block:: console
sudo yum install -y python-devel python3-devel python-pip libffi-devel
sudo -H pip install wolfssl
Testing ``wolfssl`` python module:
~~~~~~~~~~~~~~~~~~~~~~~
.. code-block:: console
python -c "from wolfssl.hashes import Sha; print Sha().hexdigest()"
expected output: **da39a3ee5e6b4b0d3255bfef95601890afd80709**
Testing ``wolfssl``'s source code with ``tox`` :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To run the unit tests in the source code, you'll need ``tox`` and a few other
requirements. The source code relies at 'WOLFSSL_DIR/wrapper/python/wolfssl'
where WOLFSSL_DIR is the path of ``wolfssl``'s source code.
To run the tox tests in the source code, you'll need ``tox`` and a few other
requirements. The source code relies at **WOLFSSL_DIR/wrapper/python/wolfssl**
where **WOLFSSL_DIR** is the path of ``wolfssl C``'s source code.
1. Make sure that the testing requirements are installed:
.. code-block:: console
.. code-block:: shell
$ sudo -H pip install -r requirements-testing.txt
sudo -H pip install -r requirements-testing.txt
2. Run ``tox``:
2. Run ``make check``:
.. code-block:: console
$ tox
$ make check
...
_________________________________ summary _________________________________
py27: commands succeeded
SKIPPED: py34: InterpreterNotFound: python3.4
py35: commands succeeded
py36: commands succeeded
congratulations :)
Note: the test is performed using multiple versions of python. If you are

230
wrapper/python/wolfssl/docs/Makefile Normal file
View File

@@ -0,0 +1,230 @@
# Makefile for Sphinx documentation
#
# You can set these variables from the command line.
SPHINXOPTS =
SPHINXBUILD = sphinx-build
PAPER =
BUILDDIR = _build
# User-friendly check for sphinx-build
ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don\'t have Sphinx installed, grab it from http://sphinx-doc.org/)
endif
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
.PHONY: help
help:
@echo "Please use \`make <target>' where <target> is one of"
@echo " html to make standalone HTML files"
@echo " dirhtml to make HTML files named index.html in directories"
@echo " singlehtml to make a single large HTML file"
@echo " pickle to make pickle files"
@echo " json to make JSON files"
@echo " htmlhelp to make HTML files and a HTML help project"
@echo " qthelp to make HTML files and a qthelp project"
@echo " applehelp to make an Apple Help Book"
@echo " devhelp to make HTML files and a Devhelp project"
@echo " epub to make an epub"
@echo " epub3 to make an epub3"
@echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
@echo " latexpdf to make LaTeX files and run them through pdflatex"
@echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
@echo " text to make text files"
@echo " man to make manual pages"
@echo " texinfo to make Texinfo files"
@echo " info to make Texinfo files and run them through makeinfo"
@echo " gettext to make PO message catalogs"
@echo " changes to make an overview of all changed/added/deprecated items"
@echo " xml to make Docutils-native XML files"
@echo " pseudoxml to make pseudoxml-XML files for display purposes"
@echo " linkcheck to check all external links for integrity"
@echo " doctest to run all doctests embedded in the documentation (if enabled)"
@echo " coverage to run coverage check of the documentation (if enabled)"
@echo " dummy to check syntax errors of document sources"
.PHONY: clean
clean:
rm -rf $(BUILDDIR)/*
.PHONY: html
html:
$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
.PHONY: dirhtml
dirhtml:
$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
.PHONY: singlehtml
singlehtml:
$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
@echo
@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
.PHONY: pickle
pickle:
$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
@echo
@echo "Build finished; now you can process the pickle files."
.PHONY: json
json:
$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
@echo
@echo "Build finished; now you can process the JSON files."
.PHONY: htmlhelp
htmlhelp:
$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
@echo
@echo "Build finished; now you can run HTML Help Workshop with the" \
".hhp project file in $(BUILDDIR)/htmlhelp."
.PHONY: qthelp
qthelp:
$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
@echo
@echo "Build finished; now you can run "qcollectiongenerator" with the" \
".qhcp project file in $(BUILDDIR)/qthelp, like this:"
@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/wolfcrypt.qhcp"
@echo "To view the help file:"
@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/wolfcrypt.qhc"
.PHONY: applehelp
applehelp:
$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
@echo
@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
@echo "N.B. You won't be able to view it unless you put it in" \
"~/Library/Documentation/Help or install it in your application" \
"bundle."
.PHONY: devhelp
devhelp:
$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
@echo
@echo "Build finished."
@echo "To view the help file:"
@echo "# mkdir -p $$HOME/.local/share/devhelp/wolfcrypt"
@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/wolfcrypt"
@echo "# devhelp"
.PHONY: epub
epub:
$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
@echo
@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
.PHONY: epub3
epub3:
$(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
@echo
@echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
.PHONY: latex
latex:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo
@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
@echo "Run \`make' in that directory to run these through (pdf)latex" \
"(use \`make latexpdf' here to do that automatically)."
.PHONY: latexpdf
latexpdf:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through pdflatex..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
.PHONY: latexpdfja
latexpdfja:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through platex and dvipdfmx..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
.PHONY: text
text:
$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
@echo
@echo "Build finished. The text files are in $(BUILDDIR)/text."
.PHONY: man
man:
$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
@echo
@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
.PHONY: texinfo
texinfo:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo
@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
@echo "Run \`make' in that directory to run these through makeinfo" \
"(use \`make info' here to do that automatically)."
.PHONY: info
info:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo "Running Texinfo files through makeinfo..."
make -C $(BUILDDIR)/texinfo info
@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
.PHONY: gettext
gettext:
$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
@echo
@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
.PHONY: changes
changes:
$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
@echo
@echo "The overview file is in $(BUILDDIR)/changes."
.PHONY: linkcheck
linkcheck:
$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
@echo
@echo "Link check complete; look for any errors in the above output " \
"or in $(BUILDDIR)/linkcheck/output.txt."
.PHONY: doctest
doctest:
$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
@echo "Testing of doctests in the sources finished, look at the " \
"results in $(BUILDDIR)/doctest/output.txt."
.PHONY: coverage
coverage:
$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
@echo "Testing of coverage in the sources finished, look at the " \
"results in $(BUILDDIR)/coverage/python.txt."
.PHONY: xml
xml:
$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
@echo
@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
.PHONY: pseudoxml
pseudoxml:
$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
@echo
@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
.PHONY: dummy
dummy:
$(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
@echo
@echo "Build finished. Dummy builder generates no files."

23
wrapper/python/wolfssl/docs/api.rst Normal file
View File

@@ -0,0 +1,23 @@
API
===
.. module:: wolfssl
SSL/TLS Context
---------------
SSLContext
~~~~~~~~~~
.. autoclass:: SSLContext
:members:
SSL/TLS Socket
--------------
SSLSocket
~~~~~~~~~
.. autoclass:: SSLSocket
:members:

300
wrapper/python/wolfssl/docs/conf.py Normal file
View File

@@ -0,0 +1,300 @@
# -*- coding: utf-8 -*-
#
# wolfcrypt documentation build configuration file, created by
# sphinx-quickstart on Fri Apr 29 16:47:53 2016.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
# pylint: disable=invalid-name, redefined-builtin, exec-used
import os
import sphinx_rtd_theme
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
#sys.path.insert(0, os.path.abspath('.'))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
#needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = [
'sphinx.ext.autodoc',
'sphinx.ext.doctest',
'sphinx.ext.coverage',
'sphinx.ext.viewcode',
'sphinx.ext.githubpages',
]
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
# source_suffix = ['.rst', '.md']
source_suffix = '.rst'
# The encoding of source files.
#source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
project = u'wolfssl Python'
copyright = u'2017, wolfSSL Inc. All rights reserved'
author = u'wolfSSL'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
base_dir = os.path.join(os.path.dirname(__file__), os.pardir, "src")
about = {}
with open(os.path.join(base_dir, "wolfssl", "__about__.py")) as f:
exec(f.read(), about)
version = release = about["__version__"]
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
#today = ''
# Else, today_fmt is used as the format for a strftime call.
#today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
# This patterns also effect to html_static_path and html_extra_path
exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
# The reST default role (used for this markup: `text`) to use for all
# documents.
#default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
#add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
#add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
#show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
#modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
#keep_warnings = False
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
html_theme = 'sphinx_rtd_theme'
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
#html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
# The name for this set of Sphinx documents.
# "<project> v<release> documentation" by default.
#html_title = u'%s v%s' % (project, release)
# A shorter title for the navigation bar. Default is the same as html_title.
#html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
#html_logo = None
# The name of an image file (relative to this directory) to use as a favicon of
# the docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
#html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ['_static']
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
#html_extra_path = []
# If not None, a 'Last updated on:' timestamp is inserted at every page
# bottom, using the given strftime format.
# The empty string is equivalent to '%b %d, %Y'.
#html_last_updated_fmt = None
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
#html_use_smartypants = True
# Custom sidebar templates, maps document names to template names.
#html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
#html_additional_pages = {}
# If false, no module index is generated.
#html_domain_indices = True
# If false, no index is generated.
#html_use_index = True
# If true, the index is split into individual pages for each letter.
#html_split_index = False
# If true, links to the reST sources are added to the pages.
#html_show_sourcelink = True
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
#html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
#html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
#html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
#html_file_suffix = None
# Language to be used for generating the HTML full-text search index.
# Sphinx supports the following languages:
# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr', 'zh'
#html_search_language = 'en'
# A dictionary with options for the search language support, empty by default.
# 'ja' uses this config value.
# 'zh' user can custom change `jieba` dictionary path.
#html_search_options = {'type': 'default'}
# The name of a javascript file (relative to the configuration directory) that
# implements a search results scorer. If empty, the default will be used.
#html_search_scorer = 'scorer.js'
# Output file base name for HTML help builder.
htmlhelp_basename = 'wolfssl-pydoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
#'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#'preamble': '',
# Latex figure (float) alignment
#'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'wolfssl.tex', u'wolfssl Python Documentation',
u'wolfSSL', 'manual'),
]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
#latex_use_parts = False
# If true, show page references after internal links.
#latex_show_pagerefs = False
# If true, show URL addresses after external links.
#latex_show_urls = False
# Documents to append as an appendix to all manuals.
#latex_appendices = []
# If false, no module index is generated.
#latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, 'wolfssl', u'wolfssl Python Documentation',
[author], 1)
]
# If true, show URL addresses after external links.
#man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'wolfssl', u'wolfssl Python Documentation',
author, 'wolfssl', 'One line description of project.',
'Miscellaneous'),
]
# Documents to append as an appendix to all manuals.
#texinfo_appendices = []
# If false, no module index is generated.
#texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
#texinfo_no_detailmenu = False
# Preserves the order of the members, doesn't sorts them alphabetically.
autodoc_member_order = 'bysource'

15
wrapper/python/wolfssl/docs/index.rst Normal file
View File

@@ -0,0 +1,15 @@
.. include:: ../README.rst
Summary
-------
.. toctree::
:maxdepth: 1
context
socket
.. automodule:: wolfssl
:members:
.. include:: ../LICENSING.rst

1
wrapper/python/wolfssl/docs/installation.rst Normal file
View File

@@ -0,0 +1 @@
.. include:: ../README.rst

1
wrapper/python/wolfssl/docs/licensing.rst Normal file
View File

@@ -0,0 +1 @@
.. include:: ../LICENSING.rst

8
wrapper/python/wolfssl/docs/usage.rst Normal file
View File

@@ -0,0 +1,8 @@
Usage
=====
SSL/TLS Client
--------------
SSL/TLS Server
--------------

1
wrapper/python/wolfssl/src/wolfssl/__init__.py
View File

@@ -19,6 +19,7 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
import sys
import errno
from socket import (