Merge pull request #407 from wolfSSL/embOS-port

embOS port
2016-05-05 13:27:27 -07:00
parent e5f1ad5702 4df12e1bd5
commit ee21d33794
34 changed files with 23802 additions and 4 deletions
--- a/IDE/IAR-EWARM/README
+++ b/IDE/IAR-EWARM/README
@@ -4,6 +4,11 @@ This directory contains project files for IAR EWARM IDE. These
 projects have been set up to generic ARM Cortex-M MPUs. 
 In order to generate project for specific target MPU, take following steps. 

+** Note ** regarding Segger Embedded Operating System (embOS)
+    The directory embOS contains projects specifically for embOS on IAR-EWARM.
+    Only use this directory if you are building an IAR Workbench project that
+    uses embOS
+

 Included Project Files 
 ----------------------- 
--- a/IDE/IAR-EWARM/embOS/.gitignore
+++ b/IDE/IAR-EWARM/embOS/.gitignore
@@ -0,0 +1,6 @@
+*.bat
+*.xcl
+*.crun
+*.dbgdt
+*.dni
+
--- a/IDE/IAR-EWARM/embOS/README
+++ b/IDE/IAR-EWARM/embOS/README
@@ -0,0 +1,28 @@
+#-----------------------------------------------------------------------------#
+wolfSSL + embOS + IAR Workbench
+#-----------------------------------------------------------------------------#
+
+#-----------------------------------------------------------------------------#
+For building the existing examples on a SAMV71_Explained_Ultra with Cortex M7
+#-----------------------------------------------------------------------------#
+
+    See SAMV71_XULT\<example>\README_<example>
+
+    I.E. SAMV71_XULT\embOS_wolfcrypt_lib_SAMV71_XULT\README_wolfcrypt_lib
+
+#-----------------------------------------------------------------------------#
+For building wolfssl on a new CPU that is supported by embOS in IAR Workbench
+#-----------------------------------------------------------------------------#
+
+    See custom_port\README_custom_port
+
+#-----------------------------------------------------------------------------#
+#-----------------------------------------------------------------------------#
+
+Thank you for choosing wolfSSL if you ever have any questions please contact us!
+
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
+
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/README_SAMV71
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/README_SAMV71
@@ -0,0 +1,14 @@
+Each example project here has it's own README please follow them in detail.
+
+embOS_wolfcrypt_benchmark_SAMV71_XULT\README_wolfcrypt_benchmark
+embOS_wolfcrypt_lib_SAMV71_XULT\README_wolfcrypt_lib
+embOS_wolfcrypt_test_SAMV71_XULT\README_wolfcrypt_test
+
+
+Thank you for using this guide and we hope this is helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
+
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_Linker_Script/samv71q21_wolfssl.icf
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_Linker_Script/samv71q21_wolfssl.icf
@@ -0,0 +1,33 @@
+/*
+ * A simple example for evaluation purposes written from scratch by wolfSSL Inc
+ */
+
+/*###ICF### ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__     = 0x00400000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_RAM_start__ = 0x20400000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20459999;
+define symbol __ICFEDIT_region_ROM_start__ = 0x00400000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x00599999;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__      = 0x400;
+define symbol __ICFEDIT_size_heap__        = 0x13000;
+/**** ###ICF###*/
+
+define memory mem with size = 4G;
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block CSTACK, block HEAP };
+
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings.h
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings.h
@@ -0,0 +1,67 @@
+#ifndef _EMBOS_USER_SETTINGS_H_
+#define _EMBOS_USER_SETTINGS_H_
+
+    #undef WOLFSSL_EMBOS
+    #define WOLFSSL_EMBOS
+
+    #undef WOLFCRYPT_ONLY
+    #define WOLFCRYPT_ONLY
+
+    #undef NO_64BIT
+    #define NO_64BIT
+
+    #undef SIZEOF_LONG
+    #define SIZEOF_LONG 4
+
+    #undef SIZEOF_LONG_LONG
+    #define SIZEOF_LONG_LONG 8
+
+    #undef USE_FAST_MATH
+    #define USE_FAST_MATH
+
+    #undef HAVE_CHACHA
+    #define HAVE_CHACHA
+
+    #undef HAVE_POLY1305
+    #define HAVE_POLY1305
+
+    #undef ECC_SHAMIR
+    #define ECC_SHAMIR
+
+    #undef HAVE_ECC
+    #define HAVE_ECC
+
+    #undef ECC_USER_CURVES
+    #define ECC_USER_CURVES
+
+    #undef ECC_ALT_SIZE
+    #define ECC_ALT_SIZE
+
+    #undef FP_MAX_BITS_ECC
+    #define FP_MAX_BITS_ECC 528
+
+    #undef TFM_TIMING_RESISTANT
+    #define TFM_TIMING_RESISTANT
+
+    #undef WOLFSSL_SHA512
+    #define WOLFSSL_SHA512
+
+    #undef WOLFSSL_SHA384
+    #define WOLFSSL_SHA384
+
+    #undef HAVE_AESGCM
+    #define HAVE_AESGCM
+
+    #undef NO_INLINE
+    #define NO_INLINE
+
+    #undef BENCH_EMBEDDED
+    #define BENCH_EMBEDDED
+
+    #undef WOLFSSL_SMALL_STACK
+    #define WOLFSSL_SMALL_STACK
+
+    #undef USE_WOLFSSL_MEMORY
+    #define USE_WOLFSSL_MEMORY
+
+#endif /* _EMBOS_USER_SETTINGS_H_ */
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings_simple_example.h
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings_simple_example.h
@@ -0,0 +1,43 @@
+#ifndef _EMBOS_USER_SETTINGS_H_
+#define _EMBOS_USER_SETTINGS_H_
+
+    #undef WOLFCRYPT_ONLY
+    #define WOLFCRYPT_ONLY
+
+    #undef NO_64BIT
+    #define NO_64BIT
+
+    #undef SIZEOF_LONG
+    #define SIZEOF_LONG 4
+
+    #undef SIZEOF_LONG_LONG
+    #define SIZEOF_LONG_LONG 8
+
+    #undef HAVE_CHACHA
+    #define HAVE_CHACHA
+
+    #undef HAVE_POLY1305
+    #define HAVE_POLY1305
+
+    #undef ECC_SHAMIR
+    #define ECC_SHAMIR
+
+    #undef HAVE_ECC
+    #define HAVE_ECC
+
+    #undef WOLFSSL_SHA512
+    #define WOLFSSL_SHA512
+
+    #undef WOLFSSL_SHA384
+    #define WOLFSSL_SHA384
+
+    #undef HAVE_AESGCM
+    #define HAVE_AESGCM
+
+    #undef NO_INLINE
+    #define NO_INLINE
+
+    #undef BENCH_EMBEDDED
+    #define BENCH_EMBEDDED
+
+#endif /* _EMBOS_USER_SETTINGS_H_ */
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings_verbose_example.h
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_SAMV71_XULT_user_settings/user_settings_verbose_example.h
@@ -0,0 +1,191 @@
+#ifndef _EMBOS_USER_SETTINGS_H_
+#define _EMBOS_USER_SETTINGS_H_
+
+/* ------------------------------------------------------------------------- */
+/* Platform */
+/* ------------------------------------------------------------------------- */
+#undef NO_INLINE
+#define NO_INLINE
+
+#undef  SINGLE_THREADED
+#define SINGLE_THREADED
+
+#undef  WOLFSSL_SMALL_STACK
+#define WOLFSSL_SMALL_STACK
+
+
+/* ------------------------------------------------------------------------- */
+/* Math Configuration */
+/* ------------------------------------------------------------------------- */
+#undef NO_64BIT
+#define NO_64BIT
+
+#ifndef SIZEOF_LONG
+#define SIZEOF_LONG 4
+#endif
+#ifndef SIZEOF_LONG_LONG
+#define SIZEOF_LONG_LONG 8
+#endif
+
+#undef  USE_FAST_MATH
+#define USE_FAST_MATH
+
+#ifdef USE_FAST_MATH
+    #undef  TFM_TIMING_RESISTANT
+//    #define TFM_TIMING_RESISTANT
+
+    /* Optimizations (TFM_ARM, TFM_ASM or none) */
+    #undef  TFM_ARM
+//    #define TFM_ARM
+
+    #undef  TFM_ASM
+    //#define TFM_ASM
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* Crypto */
+/* ------------------------------------------------------------------------- */
+#undef WOLFCRYPT_ONLY
+#define WOLFCRYPT_ONLY
+
+/* ECC */
+#if 1
+    #undef  HAVE_ECC
+    #define HAVE_ECC
+
+    /* Manually define enabled curves */
+    #undef  ECC_USER_CURVES
+    #define ECC_USER_CURVES
+
+    #define HAVE_ECC192
+    #define HAVE_ECC224
+    #undef NO_ECC256
+    #define HAVE_ECC384
+    #define HAVE_ECC521
+
+    /* Fixed point cache (speeds repeated operations against same private key) */
+    #undef  FP_ECC
+    //#define FP_ECC
+    #ifdef FP_ECC
+        /* Bits / Entries */
+        #undef  FP_ENTRIES
+        #define FP_ENTRIES  2
+        #undef  FP_LUT
+        #define FP_LUT      4
+    #endif
+
+    /* Optional ECC calculation method */
+    /* Note: doubles heap usage, but slightly faster */
+    #undef  ECC_SHAMIR
+    #define ECC_SHAMIR
+
+    /* Reduces heap usage, but slower */
+    #undef  ECC_TIMING_RESISTANT
+    #define ECC_TIMING_RESISTANT
+
+    #ifdef USE_FAST_MATH
+        /* Max ECC bits (curve size * 8). ECC521 is (66*8) = 528. */
+        #undef  ALT_ECC_SIZE
+        #define ALT_ECC_SIZE
+        #undef  FP_MAX_BITS_ECC
+        #define FP_MAX_BITS_ECC     528
+
+        /* Enable TFM optimizations for ECC */
+        #define TFM_ECC192
+        #define TFM_ECC224
+        #define TFM_ECC256
+        #define TFM_ECC384
+        #define TFM_ECC521
+    #endif
+#endif
+
+/* RSA */
+#undef NO_RSA
+#if 1
+    #ifdef USE_FAST_MATH
+        /* Maximum math bits (Max RSA key bits * 2) */
+        #undef  FP_MAX_BITS
+        #define FP_MAX_BITS     4096
+    #endif
+
+    /* half as much memory but twice as slow */
+    #undef  RSA_LOW_MEM
+    //#define RSA_LOW_MEM
+#else
+    #define NO_RSA
+#endif
+
+/* AES */
+#undef NO_AES
+#if 1
+    #undef  HAVE_AESGCM
+    #define HAVE_AESGCM
+
+    /* GCM Method: GCM_SMALL, GCM_WORD32 or GCM_TABLE */
+    #undef  GCM_SMALL
+    #define GCM_SMALL
+#else
+    #define NO_AES
+#endif
+
+/* ChaCha20 / Poly1305 */
+#undef HAVE_CHACHA
+#undef HAVE_POLY1305
+#if 1
+    #define HAVE_CHACHA
+    #define HAVE_POLY1305
+
+    /* Needed for Poly1305 */
+    #undef  HAVE_ONE_TIME_AUTH
+    #define HAVE_ONE_TIME_AUTH
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Hashing */
+/* ------------------------------------------------------------------------- */
+/* Sha */
+#undef NO_SHA
+#if 1
+#else
+    #define NO_SHA
+#endif
+
+/* Sha256 */
+#undef NO_SHA256
+#if 1
+    /* over twice as small, but 50% slower */
+    //#define USE_SLOW_SHA2
+#else
+    #define NO_SHA256
+#endif
+
+/* Sha512 */
+#undef WOLFSSL_SHA512
+#if 1
+    #define WOLFSSL_SHA512
+
+    /* Sha384 */
+    #undef  WOLFSSL_SHA384
+    #if 1
+        #define WOLFSSL_SHA384
+    #endif
+#endif
+
+/* MD5 */
+#undef  NO_MD5
+#if 1
+    #define NO_MD5
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* Benchmark / Test */
+/* ------------------------------------------------------------------------- */
+/* Use reduced benchmark / test sizes */
+#undef  BENCH_EMBEDDED
+#define BENCH_EMBEDDED
+
+#undef  USE_CERT_BUFFERS_2048
+#define USE_CERT_BUFFERS_2048
+
+#endif /* _EMBOS_USER_SETTINGS_H_ */
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/Application/runBenchmarks.c
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/Application/runBenchmarks.c
@@ -0,0 +1,29 @@
+#include "RTOS.h"
+#include "BSP.h"
+#include <stdio.h>
+#include <wolfcrypt/benchmark/benchmark.h>
+
+static OS_STACKPTR int WLFSTACK[20000];   /* Stack Size for Task */
+static OS_TASK WLFTASK;                   /* Task */
+
+static void wolfTask(void) {
+  printf("Begin Benchmark Tests\n");
+  benchmark_test(NULL);
+  printf("Benchmark Tests Complete\n");
+  while (1) {
+    BSP_ToggleLED(1);
+    OS_Delay(200);
+  }
+}
+
+
+int main(void) {
+  OS_IncDI();                      /* Disable interrupts */
+  OS_InitKern();                   /* Initialize OS */
+  OS_InitHW();                     /* Initialize Hardware */
+  BSP_Init();                      /* Initialize LED ports */
+  /* You need to create at least one task before calling OS_Start() */
+  OS_CREATETASK(&WLFTASK, "Tests task", wolfTask, 100, WLFSTACK);
+  OS_Start();                      /* Start the OS */
+  return 0;
+}
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/README_wolfcrypt_benchmark
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/README_wolfcrypt_benchmark
@@ -0,0 +1,70 @@
+Steps taken to evaluate wolfSSL with the following:
+
+Required Software for this guide:
+IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
+embOS v4.16 (for Cortex-M and IAR compiler)
+wolfssl (latest version)
+
+Required items (Hardware) for this guide:
+Atmel SAM V71 Xplained Ultra (Or equivelent Cortex-M Evaluation Board)
+    Note: Must have J-Trace adapter (SWD or SWD + ETM)
+j-Trace for ARM Cortex-M Processors
+    Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
+    Note: You can also purchase other models, we used one from IAR v3.2
+20 pin target ribbon cable
+USB Cable with j-Trace adapter end
+Micro usb cable
+
+#--!! NOTE !!--#
+For this guide "**SAMV71_DIR" will signify the directory:
+C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
+
+#----------------------------------------------------------------------------#
+# Setup file system to evaluate wolfssl  in embOS project:
+# (If you have not already done so)
+#----------------------------------------------------------------------------#
+
+1. In wolfssl you will notice the directory:
+    wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here
+
+2. go to embOS website and download a trial for your platform
+   https://www.segger.com/downloads/embos ->
+                                      embOS trial for Cortex-M and IAR compiler
+
+3. Extract (unzip) the download to
+    C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
+    (Note: you do not need to do anything further in this directory, the
+      wolfSSL evaluation projects will simply link against it)
+	  
+#----------------------------------------------------------------------------#
+# Evaluate wolfcrypt_benchmarks in embOS project:
+#----------------------------------------------------------------------------#
+
+1. In IAR Workbench go to Project -> Add Existing Project
+    a. Browse to **SAMV71_DIR\embOS_wolfcrypt_benchmark_SAMV71_XULT\
+    b. Choose wolfcrypt_benchmark.ewp and click "Open"
+
+2. Go to Project -> Rebuild All
+
+3. Connect your SAMV71 Xplained Ultra to your PC with micro USB in the "Debug"
+   port for power and the J-Link hooked up to SWD pins and your PC
+
+4. Go to Project -> Download and Debug
+
+5. Once the "Debug" environment has loaded go to: View -> Terminal I/O
+   (This is where the printf's will be directed to)
+
+6. Hit "Go" (Debug option with 3 right arrows "→→→")
+
+7. You should observe the benchmark times for the configured algorithms.
+
+#----------------------------------------------------------------------------#
+#----------------------------------------------------------------------------#
+
+Thank you for using this guide and we hope this was helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
+
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/settings/wolfcrypt_benchmark_Debug.jlink
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/settings/wolfcrypt_benchmark_Debug.jlink
@@ -0,0 +1,39 @@
+[BREAKPOINTS]
+ForceImpTypeAny = 0
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CFI]
+CFISize = 0x00
+CFIAddr = 0x00
+[CPU]
+MonModeVTableAddr = 0xFFFFFFFF
+MonModeDebug = 0
+MaxNumAPs = 0
+LowPowerHandlingMode = 0
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[FLASH]
+CacheExcludeSize = 0x00
+CacheExcludeAddr = 0x00
+MinNumBytesFlashDL = 0
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 1
+Device="ATSAMV71Q21"
+[GENERAL]
+WorkRAMSize = 0x00
+WorkRAMAddr = 0x00
+RAMUsageLimit = 0x00
+[SWO]
+SWOLogFile=""
+[MEM]
+RdOverrideOrMask = 0x00
+RdOverrideAndMask = 0xFFFFFFFF
+RdOverrideAddr = 0xFFFFFFFF
+WrOverrideOrMask = 0x00
+WrOverrideAndMask = 0xFFFFFFFF
+WrOverrideAddr = 0xFFFFFFFF
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewd
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewd
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewp
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewp
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewt
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_benchmark_SAMV71_XULT/wolfcrypt_benchmark.ewt
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/README_wolfcrypt_lib
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/README_wolfcrypt_lib
@@ -0,0 +1,44 @@
+Steps taken to evaluate wolfSSL with the following:
+
+Required Software for this guide:
+IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
+embOS v4.16 (for Cortex-M and IAR compiler)
+wolfssl (latest version)
+
+Required items (Hardware) for this guide:
+Atmel SAM V71 Xplained Ultra (Or equivelent Cortex-M Evaluation Board)
+    Note: Must have J-Trace adapter (SWD or SWD + ETM)
+j-Trace for ARM Cortex-M Processors
+    Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
+    Note: You can also purchase other models, we used one from IAR v3.2
+20 pin target ribbon cable
+USB Cable with j-Trace adapter end
+Micro usb cable
+
+#--!! NOTE !!--#
+For this guide "**SAMV71_DIR" will signify the directory:
+C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
+
+
+#----------------------------------------------------------------------------#
+# Create wolfcrypt_lib.a
+#----------------------------------------------------------------------------#
+
+1. Open IAR Workbench -> Project -> Add Existing Project
+    a. Browse to **SAMV71_DIR\embOS_wolfcrypt_lib
+    c. Choose wolfcrypt_lib.ewp and click "Open"
+
+2. Go to Project -> Rebuild All
+
+3. Verify the library built, you should now have:
+    **SAMV71_DIR\embOS_wolfcrypt_lib\Debug\Bin\wolfcrypt_lib.a
+
+#----------------------------------------------------------------------------#
+#----------------------------------------------------------------------------#
+
+Thank you for using this guide and we hope this was helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewd
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewd
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewp
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewp
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewt
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_lib_SAMV71_XULT/wolfcrypt_lib.ewt
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/Application/runWolfcryptTests.c
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/Application/runWolfcryptTests.c
@@ -0,0 +1,29 @@
+#include "RTOS.h"
+#include "BSP.h"
+#include <stdio.h>
+#include <wolfcrypt/test/test.h>
+
+static OS_STACKPTR int WLFSTACK[20000];   /* Stack Size for Task */
+static OS_TASK WLFTASK;                   /* Task */
+
+static void wolfTask(void) {
+  printf("Begin wolfcrypt tests\n");
+  wolfcrypt_test(NULL);
+  printf("wolfcrypt tests complete.\n");
+  while (1) {
+    BSP_ToggleLED(1);
+    OS_Delay(200);
+  }
+}
+
+
+int main(void) {
+  OS_IncDI();                      /* Disable interrupts */
+  OS_InitKern();                   /* Initialize OS */
+  OS_InitHW();                     /* Initialize Hardware for OS */
+  BSP_Init();                      /* Initialize LED ports */
+  /* You need to create at least one task before calling OS_Start() */
+  OS_CREATETASK(&WLFTASK, "Tests task", wolfTask, 100, WLFSTACK);
+  OS_Start();                      /* Start the OS */
+  return 0;
+}
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/README_wolfcrypt_test
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/README_wolfcrypt_test
@@ -0,0 +1,69 @@
+Steps taken to evaluate wolfSSL with the following:
+
+Required Software for this guide:
+IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
+embOS v4.16 (for Cortex-M and IAR compiler)
+wolfssl (latest version)
+
+Required items (Hardware) for this guide:
+Atmel SAM V71 Xplained Ultra (Or equivelent Cortex-M Evaluation Board)
+    Note: Must have J-Trace adapter (SWD or SWD + ETM)
+j-Trace for ARM Cortex-M Processors
+    Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
+    Note: You can also purchase other models, we used one from IAR v3.2
+20 pin target ribbon cable
+USB Cable with j-Trace adapter end
+Micro usb cable
+
+#--!! NOTE !!--#
+For this guide "**SAMV71_DIR" will signify the directory:
+C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
+
+#----------------------------------------------------------------------------#
+# Setup file system to evaluate wolfssl  in embOS project:
+# (If you have not already done so)
+#----------------------------------------------------------------------------#
+
+1. In wolfssl you will notice the directory:
+    wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here
+
+2. go to embOS website and download a trial for your platform
+   https://www.segger.com/downloads/embos ->
+                                      embOS trial for Cortex-M and IAR compiler
+
+3. Extract (unzip) the download to
+    C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
+    (Note: you do not need to do anything further in this directory, the
+      wolfSSL evaluation projects will simply link against it)
+
+#----------------------------------------------------------------------------#
+# Evaluate wolfcrypt_tests in embOS project:
+#----------------------------------------------------------------------------#
+
+1. In IAR Workbench go to Project -> Add Existing Project
+    a. Browse to **SAMV71_DIR\embOS_wolfcrypt_test_SAMV71_XULT\
+    b. Choose wolfcrypt_test.ewp and click "Open"
+
+2. Go to Project -> Rebuild All
+
+3. Connect your SAMV71 Xplained Ultra to your PC with micro USB in the "Debug"
+   port for power and the J-Link hooked up to SWD pins and your PC
+
+4. Go to Project -> Download and Debug
+
+5. Once the "Debug" environment has loaded go to: View -> Terminal I/O
+   (This is where the printf's will be directed to)
+
+6. Hit "Go" (Debug option with 3 right arrows "→→→")
+
+7. You should observe the tests run and pass.
+
+#----------------------------------------------------------------------------#
+#----------------------------------------------------------------------------#
+
+Thank you for using this guide and we hope this was helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/settings/wolfcrypt_test_Debug.jlink
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/settings/wolfcrypt_test_Debug.jlink
@@ -0,0 +1,39 @@
+[BREAKPOINTS]
+ForceImpTypeAny = 0
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CFI]
+CFISize = 0x00
+CFIAddr = 0x00
+[CPU]
+MonModeVTableAddr = 0xFFFFFFFF
+MonModeDebug = 0
+MaxNumAPs = 0
+LowPowerHandlingMode = 0
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[FLASH]
+CacheExcludeSize = 0x00
+CacheExcludeAddr = 0x00
+MinNumBytesFlashDL = 0
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 1
+Device="ATSAMV71Q21"
+[GENERAL]
+WorkRAMSize = 0x00
+WorkRAMAddr = 0x00
+RAMUsageLimit = 0x00
+[SWO]
+SWOLogFile=""
+[MEM]
+RdOverrideOrMask = 0x00
+RdOverrideAndMask = 0xFFFFFFFF
+RdOverrideAddr = 0xFFFFFFFF
+WrOverrideOrMask = 0x00
+WrOverrideAndMask = 0xFFFFFFFF
+WrOverrideAddr = 0xFFFFFFFF
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewd
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewd
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewp
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewp
--- a/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewt
+++ b/IDE/IAR-EWARM/embOS/SAMV71_XULT/embOS_wolfcrypt_test_SAMV71_XULT/wolfcrypt_test.ewt
--- a/IDE/IAR-EWARM/embOS/custom_port/README_custom_port
+++ b/IDE/IAR-EWARM/embOS/custom_port/README_custom_port
@@ -0,0 +1,222 @@
+Steps taken to evaluate wolfSSL with the following:
+
+Required Software for this guide:
+IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
+embOS (version that supports your CPU)
+wolfssl (latest version)
+
+#----------------------------------------------------------------------------#
+# SECTION 1:
+# Setting up the file system
+#----------------------------------------------------------------------------#
+
+1. Browse to wolfssl/IDE/IAR-EWARM/embOS/
+    a. copy/paste the directory custom_port and re-name it to the CPU
+       you intend to target. For now we will just use the term CUSTOM_DIR
+       to signify a copy of the custom_port directory
+
+#----------------------------------------------------------------------------#
+# SECTION 2:
+# Create wolfcrypt_lib.a
+#----------------------------------------------------------------------------#
+
+1. Open IAR Workbench -> Project -> Create New Project -> Empty Project
+    c. Browse to CUSTOM_DIR/wolfcrypt_lib_custom_port/ (from section 1)
+    d. Called it "wolfcrypt_lib" and hit "Save"
+
+2. Go to Project -> Add Group...
+    a. call group wolfcrypt_sources
+
+3. Right click on wolfcrypt_sources group -> Add -> Add Files...
+
+4. Browse to wolfssl/wolfcrypt/src directory and select the following files:
+
+ #---------------------------------------------#
+ #     aes.c                   memory.c        #
+ #     asn.c                   misc.c          #
+ #     chacha.c                poly1305.c      #
+ #     chacha20_poly1305.c     pwdbased.c      #
+ #     coding.c                rabbit.c        #
+ #     des3.c                  random.c        #
+ #     dh.c                    rsa.c           #
+ #     dsa.c                   sha.c           #
+ #     ecc.c                   sha256.c        #
+ #     hash.c                  sha512.c        #
+ #     hmac.c                  tfm.c           #
+ #     md4.c                   wc_encrypt.c    #
+ #     md5.c                   wc_port.c       #
+ #---------------------------------------------#
+
+5. Once those are all added go to
+                    Project -> Properties C/C++ Compiler -> Preprocessor (Tab)
+    a. In the field "Defined symbols:" add WOLFSSL_USER_SETTINGS
+    b. In the field "Additional include directories:"
+        put in this line: $PROJ_DIR$\..\..\..\..\..\
+		   and this line: $PROJ_DIR$\..\custom_port_user_settings
+		#---------------------------------------------
+        #(Or alternately you can use the browse option to navigate to
+        #C:\<path-to>\wolfssl and
+        #C:\<path-to>\wolfssl\IDE\IAR-EWARM\CUSTOM_DIR\
+        #                                        custom_port_user_settings\)
+		#(If you ever need to change or customize your build settings this
+	    #is the file that should be modified:
+	    #CUSTOM_DIR\custom_port_user_settings\user_settings.h)
+        #---------------------------------------------
+
+7. In Project -> Options -> General Options -> Output (Tab)
+    Check the option for "Library" instead of "Executable"
+    Click "OK"
+
+8. Go to Project -> Rebuild all (The library should build)
+
+9. Confirm the library is now located here:
+    C:\<path to>\wolfssl\IDE\IAR-EWARM\CUSTOM_DIR\wolfcrypt_lib_custom_port\
+                                                    Debug\Exe\wolfcrypt_lib.a
+
+We are now set to link to this library in the evaluation project
+
+#----------------------------------------------------------------------------#
+# SECTION 3:
+# Evaluate wolfcrypt tests in embOS project:
+#----------------------------------------------------------------------------#
+
+
+1. go to embOS website and download a trial for your platform
+   https://www.segger.com/downloads/embos ->
+                                     embOS trial for Cortex-M and IAR compiler
+
+2. After downloading, extract the zip to:
+                  C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
+
+3. Open IAR Workbench -> Project -> Create New Project -> Empty Project
+    c. Browse to CUSTOM_DIR\wolfcrypt_test_custom_port\ (from section 1)
+    d. Called it "wolfcrypt_test" and hit "Save"
+
+4. Go to Project -> Options -> C/C++ Compiler -> Preprocessor (Tab)
+    a. Add these to the field "Defined symbols:"
+        DEBUG=1
+        __CPU-YOU-ARE-TARGETING__ (For example: __SAMV71Q21__)
+        WOLFSSL_USER_SETTINGS
+
+    b. Now in the field "Additional include directories:"
+        $PROJ_DIR$\..\..\..\..\..\
+		$PROJ_DIR$\..\custom_port_user_settings
+		#---------------------------------------------
+        #(Or alternately you can use the browse option to navigate to
+        #C:\<path-to>\wolfssl and
+        #C:\<path-to>\wolfssl\IDE\IAR-EWARM\CUSTOM_DIR\
+        #                                        custom_port_user_settings\)
+        #---------------------------------------------
+
+5. Go to Project -> Options -> Linker -> Library (Tab)
+    Add to the field "Additonal libraries:"
+    $PROJ_DIR$\..\embOS_wolfcrypt_lib_SAMV71_XULT\Debug\Exe\wolfcrypt_lib.a
+    $PROJ_DIR$\..\..\extract_trial_here\Start\Lib\os7m_tlv_dp.a
+
+6. The main project file is located here:
+      CUSTOM_DIR\wolfcrypt_test_custom_port\Application\runWolfcryptTests.c
+
+7. Right Click the project name: Add -> Add Group
+                                           add a group called "Application"
+8. Right Click that group and Add -> Add files
+                            browse to the main project file in step 5 above
+
+9. Create Groups and add files for your CPU's support. These will be .c
+   files found in the extracted directory in two places:
+
+   extract_trial_here\Start\BoardSupport\<vendor>\<CPU>\DeviceSupport
+   extract_trial_here\Start\BoardSupport\<vendor>\<CPU>\Setup
+   #---------------------------------------------
+   # For example:
+   # extract_trial_here\Start\BoardSupport\Atmel\SAMV71_XPlainedUltra\
+   #                                                          DeviceSupport
+   # extract_trial_here\Start\BoardSupport\Atmel\SAMV71_XPlainedUltra\Setup
+   #---------------------------------------------
+   
+10. To get Logging working for seeing test results:
+    a. Go to Project -> Options -> General Options -> Library Configuration
+    b. In the field "Library low-level interface implementation"
+        Check the radio button for Semihosted
+        Then in the inner field marked "stdout/stderr"
+            Check the radio button for "Via semihosting" and click "OK"
+
+11. Now we're ready to build and debug the project.
+    a. Project -> Options -> Debugger
+        In the field marked "Driver" Select drop-down and choose J-Link/J-Trace
+        Click "OK"
+    b. Project -> Rebuild All
+    c. Connect your Cortex-M evaluation board to j-Trace and j-Trace to PC
+    d. Connect the micro-USB to the debug port of the Cortex-M and PC for power
+    e. Project -> Download and Debug
+
+12. Once the Debug environment spawns go to View -> Terminal I/O
+    This is where the "printf" to stdout will be directed
+
+13. In the Debug Menu bar look for the little square with three arrows pointing
+    to the right. When you mouse over it should say "GO"
+    Click this option and in the Terminal I/O Window you should see something
+    like this (depends on which functionality you set in user_settings.h)
+
+    SEE NOTE 1 BELOW IF YOU OBSERVE AN ERROR (-40) IN RSA TEST
+
+Begin wolfcrypt tests
+MD5      test passed!
+MD4      test passed!
+SHA      test passed!
+SHA-256  test passed!
+SHA-384  test passed!
+SHA-512  test passed!
+HMAC-MD5 test passed!
+HMAC-SHA test passed!
+HMAC-SHA256 test passed!
+HMAC-SHA384 test passed!
+HMAC-SHA512 test passed!
+GMAC     test passed!
+HC-128   test passed!
+Rabbit   test passed!
+Chacha   test passed!
+POLY1305 test passed!
+ChaCha20-Poly1305 AEAD test passed!
+DES      test passed!
+DES3     test passed!
+AES      test passed!
+AES-GCM  test passed!
+RANDOM   test passed!
+RSA      test passed!
+DH       test passed!
+DSA      test passed!
+PWDBASED test passed!
+ECC      test passed!
+wolfcrypt tests complete.
+
+#----------------------------------------------------------------------------#
+# SECTION 4:
+# Evaluate benchmark tests in embOS project:
+#----------------------------------------------------------------------------#
+
+Follow the steps from section 3 only using
+CUSTOM_DIR\wolfcrypt_benchmark_custom_port\
+
+#----------------------------------------------------------------------------#
+#----------------------------------------------------------------------------#
+
+Thank you for using this guide and we hope this was helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+/* --------------------------------------------------------------------------*/
+#### NOTE 1: ####
+
+If you are working off of a base example project and you observe memory errors
+when malloc is called, make sure that the linker script has set the HEAP high
+enough.
+Project -> Options -> Linker -> (Config Tab) -> Linker configuration file
+
+Check this file for __size_heap__ it is typically set to 0x200 by default.
+There are places in wolfSSL that malloc as much as 4k at a time and peak usage
+can be as high as 29K if using full functionality.
+/* --------------------------------------------------------------------------*/
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
+
--- a/IDE/IAR-EWARM/embOS/custom_port/custom_port_Linker_Script/samv71q21_wolfssl.icf
+++ b/IDE/IAR-EWARM/embOS/custom_port/custom_port_Linker_Script/samv71q21_wolfssl.icf
@@ -0,0 +1,33 @@
+/*
+ * A simple example for evaluation purposes written from scratch by wolfSSL Inc
+ */
+
+/*###ICF### ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__     = 0x00400000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_RAM_start__ = 0x20400000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20459999;
+define symbol __ICFEDIT_region_ROM_start__ = 0x00400000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x00599999;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__      = 0x400;
+define symbol __ICFEDIT_size_heap__        = 0x13000;
+/**** ###ICF###*/
+
+define memory mem with size = 4G;
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block CSTACK, block HEAP };
+
--- a/IDE/IAR-EWARM/embOS/custom_port/custom_port_user_settings/user_settings.h
+++ b/IDE/IAR-EWARM/embOS/custom_port/custom_port_user_settings/user_settings.h
@@ -0,0 +1,64 @@
+#ifndef _EMBOS_USER_SETTINGS_H_
+#define _EMBOS_USER_SETTINGS_H_
+
+    #undef WOLFSSL_EMBOS
+    #define WOLFSSL_EMBOS
+
+    #undef WOLFCRYPT_ONLY
+    #define WOLFCRYPT_ONLY
+
+    #undef NO_64BIT
+    #define NO_64BIT
+
+    #undef SIZEOF_LONG
+    #define SIZEOF_LONG 4
+
+    #undef SIZEOF_LONG_LONG
+    #define SIZEOF_LONG_LONG 8
+
+    #undef HAVE_CHACHA
+    #define HAVE_CHACHA
+
+    #undef HAVE_POLY1305
+    #define HAVE_POLY1305
+
+    #undef ECC_SHAMIR
+    #define ECC_SHAMIR
+
+    #undef HAVE_ECC
+    #define HAVE_ECC
+
+    #undef ECC_USER_CURVES
+    #define ECC_USER_CURVES
+
+    #undef ECC_ALT_SIZE
+    #define ECC_ALT_SIZE
+
+    #undef FP_MAX_BITS_ECC
+    #define FP_MAX_BITS_ECC 528
+
+    #undef TFM_TIMING_RESISTANT
+    #define TFM_TIMING_RESISTANT
+
+    #undef WOLFSSL_SHA512
+    #define WOLFSSL_SHA512
+
+    #undef WOLFSSL_SHA384
+    #define WOLFSSL_SHA384
+
+    #undef HAVE_AESGCM
+    #define HAVE_AESGCM
+
+    #undef NO_INLINE
+    #define NO_INLINE
+
+    #undef BENCH_EMBEDDED
+    #define BENCH_EMBEDDED
+
+    #undef WOLFSSL_SMALL_STACK
+    #define WOLFSSL_SMALL_STACK
+
+    #undef USE_WOLFSSL_MEMORY
+    #define USE_WOLFSSL_MEMORY
+
+#endif /* _EMBOS_USER_SETTINGS_H_ */
--- a/IDE/IAR-EWARM/embOS/custom_port/wolfcrypt_benchmark_custom_port/Application/runBenchmarks.c
+++ b/IDE/IAR-EWARM/embOS/custom_port/wolfcrypt_benchmark_custom_port/Application/runBenchmarks.c
@@ -0,0 +1,29 @@
+#include "RTOS.h"
+#include "BSP.h"
+#include <stdio.h>
+#include <wolfcrypt/benchmark/benchmark.h>
+
+static OS_STACKPTR int WLFSTACK[20000];   /* Stack Size for Task */
+static OS_TASK WLFTASK;                   /* Task */
+
+static void wolfTask(void) {
+  printf("Begin benchmark tests\n");
+  wolfcrypt_test(NULL);
+  printf("benchmark tests complete.\n");
+  while (1) {
+    BSP_ToggleLED(1);
+    OS_Delay(200);
+  }
+}
+
+
+int main(void) {
+  OS_IncDI();                      /* Disable interrupts */
+  OS_InitKern();                   /* Initialize OS */
+  OS_InitHW();                     /* Initialize Hardware */
+  BSP_Init();                      /* Initialize LED ports */
+  /* You need to create at least one task before calling OS_Start() */
+  OS_CREATETASK(&WLFTASK, "Tests task", wolfTask, 100, WLFSTACK);
+  OS_Start();                      /* Start the OS */
+  return 0;
+}
--- a/IDE/IAR-EWARM/embOS/custom_port/wolfcrypt_test_custom_port/Application/runWolfcryptTests.c
+++ b/IDE/IAR-EWARM/embOS/custom_port/wolfcrypt_test_custom_port/Application/runWolfcryptTests.c
@@ -0,0 +1,30 @@
+#include "RTOS.h"
+#include "BSP.h"
+#include <stdio.h>
+#include <wolfcrypt/test/test.h>
+
+static OS_STACKPTR int WLFSTACK[20000];   /* Stack Size for Task */
+static OS_TASK WLFTASK;                   /* Task */
+
+static void wolfTask(void) {
+  printf("Begin wolfcrypt tests\n");
+  wolfcrypt_test(NULL);
+  printf("wolfcrypt tests complete.\n");
+  while (1) {
+    BSP_ToggleLED(1);
+    OS_Delay(200);
+  }
+}
+
+
+int main(void) {
+  OS_IncDI();                      /* Disable interrupts */
+  OS_InitKern();                   /* Initialize OS */
+  OS_InitHW();                     /* Initialize Hardware for OS */
+  BSP_Init();                      /* Initialize LED ports */
+  /* You need to create at least one task before calling OS_Start() */
+  OS_CREATETASK(&WLFTASK, "Tests task", wolfTask, 100, WLFSTACK);
+  OS_Start();                      /* Start the OS */
+  return 0;
+}
+
--- a/IDE/IAR-EWARM/embOS/extract_trial_here/README_extract_trial_here
+++ b/IDE/IAR-EWARM/embOS/extract_trial_here/README_extract_trial_here
@@ -0,0 +1,32 @@
+An empty directory used when extracting segger trial.
+
+
+
+*** For SAMV71_XULT project ***
+This trial can be found here:
+
+https://www.segger.com/downloads/embos
+
+Look for the Download for IAR compiler and Cortex M
+
+The title should be: "embOS trial for Cortex-M and IAR compiler"
+
+
+
+*** For custom port ***
+The trial will still be located at: https://www.segger.com/downloads/embos
+
+However you will need to identify and download the correct project for your
+target CPU
+
+
+
+
+Thank you for using this guide and we hope this is helpful to you. If you have
+any suggestions / feedback for us please contact us:
+support@wolfssl.com
+info@wolfssl.com
+
+Copyright © 2016 wolfSSL Inc.  All rights reserved.
+
+
--- a/wolfcrypt/benchmark/benchmark.c
+++ b/wolfcrypt/benchmark/benchmark.c
@@ -1409,7 +1409,7 @@ void bench_dh(void)
    int    i ;
    size_t bytes;
    word32 idx = 0, pubSz, privSz = 0, pubSz2, privSz2, agreeSz;
-    const byte* tmp;
+    const byte* tmp = NULL;

    byte   pub[256];    /* for 2048 bit */
    byte   pub2[256];   /* for 2048 bit */
@@ -2108,6 +2108,22 @@ void bench_ed25519KeySign(void)
        return (double)tv.SECONDS + (double)tv.MILLISECONDS / 1000;
    }

+#elif defined(WOLFSSL_EMBOS)
+    
+    #include "RTOS.h"
+
+    double current_time(int reset)
+    {
+        double time_now;
+        double current_s = OS_GetTime() / 1000.0;
+        double current_us = OS_GetTime_us() / 1000000.0;
+        time_now = (double)( current_s + current_us);
+
+        (void) reset;
+
+        return time_now;
+    }
+
 #else

    #include <sys/time.h>
--- a/wolfcrypt/src/random.c
+++ b/wolfcrypt/src/random.c
@@ -145,7 +145,8 @@ int wc_FreeRng(WC_RNG* rng)
 #else
    #if !defined(NO_DEV_RANDOM) && !defined(CUSTOM_RAND_GENERATE) && \
        !defined(WOLFSSL_GENSEED_FORTEST) && !defined(WOLFSSL_MDK_ARM) && \
-        !defined(WOLFSSL_IAR_ARM) && !defined(WOLFSSL_ROWLEY_ARM)
+        !defined(WOLFSSL_IAR_ARM) && !defined(WOLFSSL_ROWLEY_ARM) && \
+        !defined(WOLFSSL_EMBOS)
            #include <fcntl.h>
        #ifndef EBSNET
            #include <unistd.h>
@@ -1361,7 +1362,8 @@ int wc_GenerateSeed(OS_Seed* os, byte* output, word32 sz)

        return 0;
    }
-#elif defined(WOLFSSL_LPC43xx) || defined(WOLFSSL_STM32F2xx) || defined(MBED)
+#elif defined(WOLFSSL_LPC43xx) || defined(WOLFSSL_STM32F2xx) || defined(MBED) \
+      || defined(WOLFSSL_EMBOS)

    #warning "write a real random seed!!!!, just for testing now"

--- a/wolfssl/ssl.h
+++ b/wolfssl/ssl.h
@@ -976,7 +976,8 @@ WOLFSSL_API int wolfSSL_make_eap_keys(WOLFSSL*, void* key, unsigned int len,
            #include <sys/types.h>
            #include <sys/socket.h>
        #elif !defined(WOLFSSL_MDK_ARM) && !defined(WOLFSSL_IAR_ARM) && \
-              !defined(WOLFSSL_PICOTCP) && !defined(WOLFSSL_ROWLEY_ARM)
+              !defined(WOLFSSL_PICOTCP) && !defined(WOLFSSL_ROWLEY_ARM) && \
+              !defined(WOLFSSL_EMBOS)
            #include <sys/uio.h>
        #endif
        /* allow writev style writing */
--- a/wolfssl/wolfcrypt/settings.h
+++ b/wolfssl/wolfcrypt/settings.h
@@ -142,6 +142,9 @@
 /* Uncomment next line if building for uTasker */
 /* #define WOLFSSL_UTASKER */

+/* Uncomment next line if building for embOS */
+/* #define WOLFSSL_EMBOS */
+
 #include <wolfssl/wolfcrypt/visibility.h>

 #ifdef WOLFSSL_USER_SETTINGS
@@ -409,6 +412,13 @@
    #endif
 #endif

+#ifdef WOLFSSL_EMBOS
+    #define NO_FILESYSTEM           /* Not ported at this time */
+    #define USE_CERT_BUFFERS_2048   /* use when NO_FILESYSTEM */
+    #define NO_MAIN_DRIVER
+    #define NO_RC4
+    #define SINGLE_THREADED         /* Not ported at this time */
+#endif

 /* Micrium will use Visual Studio for compilation but not the Win32 API */
 #if defined(_WIN32) && !defined(MICRIUM) && !defined(FREERTOS) && \