* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* add pyserial to manifest
pymodbus is very developer oriented and assumes every developer
adapt the requierements.txt to his/hers needs.
Our requirements.txt is different it contains all posibilities allowing
user to later change configuration without having to install extra
packages.
As a consequence manifest.json needs to include the pyserial.
* modbus: make truly async client creation
Make hass call listen_once async.
Integrate content of start_modbus into async_setup.
Do not use the boiler plate create tcp client function from
pymodbus as it is sync, and also does not work well with asyncio,
instead call the init_<type> directly, since that is async.
* both component/modbus and component/serial uses pyserial-async
but with slighty different version requirements.
Combined the 2.
* Review 1
* Review 2
* Review
@staticmethod is no good, because the function uses class variables.
* Review
Pytest is sometimes a bit cryptic, lets hope this does it.
* Convert sense to use DataUpdateCoordinator for trends
* remove unused
* request update right away
* clarify
* call async refresh later
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Handle all zero serial numbers in NUT
* Add additional nut tests
* Update homeassistant/components/nut/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* remove re
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* HS220 dimmers are handled as lights with a limited feature set
* Dimmers look up has has_emeter every call so this is cached as well now
to resovle the performance issue.
* update common test for modbus integration
* remove log messages from modbus setup function.
* Make global method local
* Change parameter name to snake_case
Since all entity test functions are going to use
the modbus class, isolate the common parts in
conftest.py, and thereby make it simpler to write
additional test cases.
cleaned up test_modbus_sensor.py while splitting the code.
* solve modbus issue #33872
CONF_DELAY was used in a serial connection, which is not
permitted.
Sometimes async_update is called after async_setup is completed,
but before event EVENT_HOMEASSISTANT_START is issued, leading to
a missing object.
* resolve review comment.
Do not wait for start event, but activate pymodbus directly in
async setup.
* review 2
Remark, this does not work, async_setup hangs.
clean start_modbus() from async calls, leaving only the pymodbus
setup.
* review 2a
Moved listen_once back to start_modbus, since it is sync.
* Improve Plex debounce/throttle logic
* Use Debouncer helper, rewrite affected tests
* Mock storage so files aren't left behind
* Don't bother with wrapper method, store debouncer call during init
* Test cleanup from review
* Don't patch own code in tests
* fix bug when search for string in dict fails when dict is null
* another bug fix that I only noticed because of this other bug
* add test to cover failure scenario
* update docstring
* add additional assertions to cover failure scenario that's being fixed
Sometimes a modbus server do not respond to a transaction,
this is a contradiction to the modbus protocol specification,
but merely a matter of fact.
Use asynio.await_for() to provoke a timeout, and close the
transaction.
* Speed up TP-Link lights
* Color temp kan be None
* hs as int, force color temp=0
* Fix color temp?
* Additional tplink cleanups to reduce api calls
* Update test to return state, remove Throttle
* Fix state restore on off/on
* Fix lights without hue/sat
Co-authored-by: J. Nick Koston <nick@koston.org>
* replaced MagicMock with CoroutineMock to avoid exception
* added conversion to str so mock returns unique-id that doesn't throw json exception
* added non-empty config since hass throws exception when config is empty
* Skip parsing session if incomplete
* Schedule an update if session data is incomplete
* Mark as callback
* Remove update() & convert to async, abort if any session is incomplete
* Handle race condition in harmony setup
If the remote was discovered via ssdp before the yaml config import
happened, the unique id would already be set and the import
would abort.
* Update homeassistant/components/harmony/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* reduce
* black
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Debounce calls to Plex server
* Simplify debounce by recommendation
* Update tests to handle debounce
* Test debouncer, fix & optimize tests
* Use property instead
When placeholders are in use, flow_title needs to be
set in the json to prevent an empty name in the
integrations dashboard. This affected doorbirds
that were found via ssdp.
* Switch homekit lights to use service callbacks
Service callbacks allow us to get the on/off, brightness, etc
all in one call so we remove all the complexity that was
previously needed to handle the out of sync states
We now get the on event and brightness event at the same time
which allows us to prevent lights from flashing up to 100%
before the requested brightness.
* Fix STATE_OFF -> STATE_ON,brightness:0
If the harmony hub was not ready for connection or
was busy when importing from yaml, the import validation
would fail would not be retried.
To mitigate this scenario we now do the validation in
async_setup_platform which allows us to raise
PlatformNotReady so we can retry later.
* Handle unavailabe entities
* Remove some logging
* Set valve to lowest temp when turned off
* Remove some logging
* Address comments
* Report entity as connected if update is successful
* Fix stupidness
* Fix
* Store device_registry entry id in HueEvent
so it can be retrieved with that key when using device triggers
* Add device_trigger for hue_event from hue remotes
* supporting Hue dimmer switch & Hue Tap
* State mapping and strings are copied from deCONZ
* refactor mock_bridge for hue tests
and also share `setup_bridge_for_sensors`
for test_sensor_base and test_device_trigger.
* Add tests for device triggers with hue remotes
* Remove some triggers
* replace asyncio.wait with asyncio.gather since wait ignores exceptions
fix for test_entity_platform so it expects the exception
* changed to log on failed domains
* discovered that this fix actually removes other uncaught exceptions
* fix in the list of ignored exceptions
* replaced a few ignores on dyson tests that work locally but fail in the CI
* two more tests that are failing on the CI and not locally
* removed assertion on multiple entries with same unique_id - replaced with log and return
reverted test_entity_platform to its original since now there is no exception thrown
* entered all the dyson tests. they all pass locally and probabilistically fail in the CI
* removed unnecessary str() for exception
* added log message for duplicate entity_id / unique_id
* removed log in case of False return value
* added exc_info
* change the use of exc_info
* Convert nut to config flow
* Add a test for importing
* lint
* Address review items (part 1)
* Address review items (part 1)
* Cleanup unique id handling
* Update tests for new naming scheme
* No unique id, no device_info
* Remove sensor types
* Update tests to use resources that still exist
* Fix setting zone overlays for tados that support swing
* Support for changing swing mode will come at a later
time as another upstream update is required.
* remove debug
* style
* The api reports success before the state change
takes effect
* We now set state optimistically and followup with
an update 4 seconds in the future after any state change to
verify it actually happens.
* When hvac_mode is passed to the set_temperature service
we now switch to the desired mode.
* Add remote platform to hue integration
supporting ZGPSwitch, ZLLSwitch and ZLLRotary switches.
* Ported from custom component Hue-remotes-HASS from @robmarkcole
* Add options flow for hue, to toggle handling of sensors and remotes
* Sensors are enabled by default, and remotes are disabled,
to not generate any breaking change for existent users.
Also, when linking a new bridge these defaults are used,
so unless going explicitly to the Options menu,
the old behavior is preserved.
* SensorManager stores the enabled platforms and ignores everything else.
* Bridge is created with flags for `add_sensors` and `add_remotes`,
and uses them to forward entry setup to only the enabled platforms.
* Update listener removes disabled kinds of devices when options are changed,
so device list is in sync with options, and disabled kinds disappear from HA,
leaving the enable/disable entity option for individual devices.
* Fix hue bridge mock with new parameters
* Revert changes in hue bridge mock
* Remove OptionsFlow and platform flags
* Extract `GenericHueDevice` from `GenericHueSensor`
to use it as base class for all hue devices, including those without any entity,
like remotes without battery.
* Add `HueBattery` sensor for battery powered remotes
and generate entities for TYPE_ZLL_ROTARY and TYPE_ZLL_SWITCH remotes.
* Remove remote platform
* Add HueEvent class to fire events for button presses
* Use `sensor.lastupdated` string to control state changes
* Event data includes:
- "id", as pretty name of the remote
- "unique_id" of the remote device
- "event", with the raw code of the pressed button
('buttonevent' or 'rotaryevent' property)
- "last_updated", with the bridge timestamp for the button press
* Register ZGP_SWITCH, ZLL_SWITCH, ZLL_ROTARY remotes
* fix removal
* Exclude W0611
* Extract GenericHueDevice to its own module
and solve import tree, also fixing lint in CI
* Store registered events to do not repeat device reg
* Minor cleaning
* Add tests for hue_event and battery entities for hue remotes
* Best effort state initialization of bayesian binary sensor.
Why:
* https://github.com/home-assistant/home-assistant/issues/30119
This change addresses the need by:
* Running the main update logic eagerly for each entity being observed
on `async_added_to_hass`.
* Test of the new behavior.
* Refactor in order to reduce number of methods with side effects that
mutate instance attributes.
* Improve test coverage
Why:
* Because for some reason my commits decreased test coverage.
This change addresses the need by:
* Adding coverage for the case where a device returns `STATE_UNKNOWN`
* Adding coverage for configurations with templates
* rebase and ensure upstream tests passed
* Delete commented code from addressing merge conflict.
* Add HomeKit support for slat tilting
* Reset tilt-specific attribute, not position attribute
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add explanation why we fix HomeKit's targets
We have to assume that the device has worse precision than HomeKit. If it
reports back a state that is only _close_ to HK's requested state, we'll
"fix" what HomeKit requested so that it won't appear out of sync.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Create __init__.py
* Create manifest.json
* Update zeroconf.py
* more work on integration
* more work on integration.
* add more sensor tests.
* Update const.py
* Update sensor.py
* more work on ipp.
* Update test_config_flow.py
* more work on ipp.
* Update config_flow.py
* Update config_flow.py
* Update Meteo_France Weather constants
Updating Meteo_France integration with more weather "condition" returned by the web service.
Adding:
- "Nuit claire" (note the lower 'c') mapped to "clear-night"
- "Brume" mapped to "fog"
* Black formatting update
* add services for DSP
* add homeassistant/components/kef/const.py
* add services.yaml
* fix set_mode
* fix services
* media_player.py fixes
* bump aiokef to 0.2.9
* update requirements_all.txt
* add basic sensor.py
* add DSP settings as attributes
* add message about kef.update_dsp
* remove sensor.py
* fix pylint issues
* update_dsp inside async_added_to_hass
* use {...} instead of dict(...)
* get DSP settings when connecting to HA or once on update
* simplify condition
* do not get mode twice
* remove async_added_to_hass
* use async_register_entity_service
* remove entity_id from schema and prepend _value
* invalidate self._dsp after setting a DSP setting
* schedule update_dsp every hour
* subscribe and unsubscribe on adding and removing to HA
* don't pass hass and set _update_dsp_task_remover to None after removing
* add third stage to hass shutdown
* use 3rd stage in storage
* update core state
* add writing data to multi stop ignore
* update core test
* review comment
* update name based on feedback
* Add include_location_attributes
* Add check for different state
* Fix things
* Drop filter
* significant changes only
* Change default behavior
* Remove trailing commas
* Tado climate state moved to python-tado
* Resolve various incorrect states and add tests for known tado zone states
* Write state instead of calling for an update
This is a redux of pr #32564 with all of the zone state now moved into
python-tado and tests added for the various states.
* stale string
* add missing undos to dispachers
* remove unneeded hass
* naming
* rearrange
* fix water heater, add test
* fix water heater, add test
* switch hvac mode when changing temp if in auto/off/smart
* add test to for importing multiple output settings
* provide option to set multiple output states
* tweaks after testing
* Update homeassistant/components/konnected/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Prevent nut from doing I/O in the event loop
device_state_attributes would call for an update if the
throttle happened to expire.
* _format_display_state no self use
* Modbus: remove legacy code
flexit and stiebel_el are updated to import modbus.const,
therefore legacy code can be removed.
* Flexit: update const reference from modbus
climate.py imports from modbus direct, this is legacy and will
result in errors.
update import to be modbus.const.
* Stiebel_el: update reference to modbus
__init.py references modbus directly, this is legacy and will
give errors.
Update import to be modbus.const.
* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
* Plum Lightpad - glowIntensity is represented as a float/percentage
Calculate brightness from the glowIntensity instead of the glowIntensity from brightness.
* Renamed `_glowIntensity` to `_glow_intensity`
* Added Rounding, converting to an int, min and max boxing
* Added codeowners to the Plum Lightpad manifest.json
This upgrades to PyVicare 0.1.10 which allows to combine multiple
requests into a single HTTP GET. This in turn allows us to increase
the scan_interval to 60 seconds by default.
Additionally scan_interval has been introduced as a config parameter.
When in run schedule mode, setting the temperature will switch
the device to a temporary hold. If you set the temperature
again, we should stay in temporary hold mode and not switch
to permanent hold.
The underlying nuheat package contains a default to a
permanent hold if no setting was passed. We now always
pass the setting.
* Implement Alexa.CameraStreamController.
* Add dependencies.
* Add camera helpers for image url, and mjpeg url.
* Remove unsupported AlexaPowerController from cameras.
* Refactor camera_stream_url to hass_url
* Declare HLS instead of RTSP.
* Add test for async_get_image_url() and async_get_mpeg_stream_url().
* Sort imports.
* Fix camera.options to camera.stream_options. (#32767)
(cherry picked from commit 9af95e8577)
* Remove URL configuration option for AlexaCameraStreamController.
* Update test_initialize_camera_stream.
* Optimize camera stream configuration.
* Update Tests for optimized camera stream configuration.
* Sort imports.
* Add check for Stream integration.
* Checks and Balances.
* Remove unnecessary camera helpers.
* Return None instead of empty list for camera_stream_configurations().
In PR#24804 the step size was changed to match the step size
of the device that HomeKit is controlling. Since HomeKit
is always working in TEMP_CELSIUS and the step size is based on
the Home Assistant units setting, we were mixing data with different
units of measure when Home Assistant was using imperial units.
This regression presented the symptom that setting the
temperature to 73F would result in 74F. Other values are affected
where the math doesn't happen to work out.
HomeKit currently has a default of 0.1 in the spec and the override
of this value has been removed.
* Config flow for elkm1
* As entity ids can now be changed, the “alarm_control_panel”
attribute “changed_by_entity_id” is now “changed_by_keypad”
and will show the name of the Elk keypad instead of the entity id.
* An auto configure mode has been introduced which avoids the
need to setup the complex include and exclude filters. This
functionality still exists when configuring from yaml for power
users who want more control over which entities elkm1 generates.
* restore _has_all_unique_prefixes
* preserve legacy behavior of creating alarm_control_panels that have no linked keypads when auto_configure is False
* unroll loop
* Add integration for Schluter
New integration for Schluter DITRA-HEAT thermostats. Interacts with Schluter API via py-schluter to implement climate platform.
* Fix for manifest issue on build
Removed unnecessary configurator logic
* Flake8 & ISort issues fixed
* Code review modifications for Schluter integration
- Removed unnecessary strings.json file
- Removed unnecessary DEFAULT_SCAN_INTERVAL from __init__.py
- Removed persistent notification for authentication error in __init__.py
- Removed string casts from log statements in __init__.py
- Removed unnecessary logging of entity creations in climate.py
- Removed unnecessary lookup for hvac_mode in climate.py
* Work started on Update Coordinator
* Further Coordinator work
* Update to DataUpdateCoordinator complete
* Flake8 fix
* Removal of unnecessary SchluterPlatformData
Coordinator also now using SCAN_INTERVAL
* Disable polling, use coordinator listeners
* Isort on climate.py
* Code review modifications
- Hass data stored under domain
- Since platform only likely to be climate, removed array, load explicitly
- Remove unnecessary fan mode implementation
* Switch to HVAC action for showing current heating status
* Isort fix
* HVAC Mode return list, set_hvac_mode function added
* __init__.py modifications from code review
* Climate.py code review modifications
- Device info property removed
- Write state function on set temp failure
- Add "available" property
- Delegate sync function in coordinator update to the executor
* Serial number as unique identifier
- Now using serial number & thermostat dictionary to protect against scenarios where a device is removed and enumerable index is no longer accurate
- Removed async_write_ha_state() from set temp exception, not needed
- Removed unnecessary SCAN_INTERVAL definition
* Linting
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Changed timeout from config, load platform discover to None
* Proposed change for discover info issue
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* start of fan groups
* update fan classes
* update group entity domains
* add set speed
* update discovery for multiple entities for groups
* add fan group entity tests
* cleanup const
* cleanup entity_domain usage
* remove bad super call
* remove bad update line
* fix set speed on fan group
* change comparison
* pythonic list
* discovery guards
* Update homeassistant/components/zha/core/discovery.py
Co-Authored-By: Alexei Chetroi <lexoid@gmail.com>
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Abort rachio homekit config when one is already setup.
We can see rachio on the network to tell them to configure
it, but since the device will not give up the account it is
bound to and there can be multiple rachio controllers on a single
account, we avoid showing the device as discovered once
they already have one configured as they can always
add a new one via "+"
* doc string freshness
* doc string freshness
* Update tests/components/rachio/test_config_flow.py
Co-Authored-By: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Update PySwitchbot to 0.8.0 and added password configuration
* Removed unchanged retry_count attribute
* Fix dependencies and formatting
* Removed default value for password and use config.get instead
If the database server disconnects there were exceptions
that were not trapped which would cause the recorder event
loop to collapse. As we never want the loop to end
we trap exceptions broadly.
Fix a bug in the new commit interval setting which caused
it to always commit after 1s
If the database server disconnects there were exceptions
that were not trapped which would cause the recorder event
loop to collapse. As we never want the loop to end
we trap exceptions broadly.
Fix a bug in the new commit interval setting which caused
it to always commit after 1s
* bump pyvizio and update app_id to show app config to aid in HA config generation. squashed from multiple commits to make a rebase on dev easier
* bump pyvizio for bug fixes
* fix pyvizio version number
* only return app_id if app is unknown and explicitly create the dict that's returned
* fix tests
* fix docstring for app_id
* split entity into base and entity
* add initial light group support
* add dispatching of groups to light
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* fix rebase
* fix rebase
* use group_id for unique_id
* get entities from registry
* use group name
* update entity domain
* update zha storage to handle groups
* dispatch group entities
* update light group
* fix group remove and dispatch light group entities
* allow picking the domain for group entities
* beginning - auto determine entity domain
* move methods to helpers so they can be shared
* fix rebase
* remove double init groups... again
* cleanup startup
* use asyncio create task
* group entity discovery
* add logging and fix group name
* add logging and update group after probe if needed
* test add group via gateway
* add method to get group entity ids
* update storage
* test get group by name
* update storage on remove
* test group with single member
* add light group tests
* test some light group logic
* type hints
* fix tests and cleanup
* revert init changes except for create task
* remove group entity domain changing for now
* add missing import
* tricky code saving
* review comments
* clean up class defs
* cleanup
* fix rebase because I cant read
* make pylint happy
* Run-in-env script.gen_requirements_all and hassfest in pre-commit
* Apply suggestions from code review and change `language` to script
Co-authored-by: Ville Skyttä <ville.skytta@iki.fi>
We can see myq on the network to tell them to configure
it, but since the device will not give up the account it is
bound to and there can be multiple myq gateways on a single
account, we avoid showing the device as discovered once
they already have one configured as they can always
add a new one via "+"
* Fix minor issues mentioned in #30837 after it was closed
* Update homeassistant/components/bmp280/sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* some sensors working in homeassistant
* bring up to date
* add codeowner
* update requirements
* overhaul data imports from api & sensor discovery
* remove print statement
* delete requirements_test_all
* add requrements_test_all.txt
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* describe recursive function
* clarify that dict is returned
* remove requirements from requirements_test_all
* improve and simplify sensor naming
* add basic tests
* restore pre-commit config
* update requirements_test_all
* remove codespell requirement
* update pre-commit-config
* add-back codespell
* rename class variables as suggested by @springstan
* add dev branch to no-commit-to-branch git hook
Because my fork had the same 'dev' branch i wasn't able to push. Going forward I should probably name my branches differently.
* move config logic to __init__.py
* restore .pre-commit-config.yaml
* remove tests
* remove nextcloud test requirement
* remove debugging code
* implement binary sensors
* restore .pre-commit-config.yaml
* bump dependency version
* bump requirements files
* bump nextcloud reqirement to latest
* update possible exceptions, use fstrings
* add list of sensors & fix inconsistency in get_data_points
* use domain for config
* fix guard clause
* repair pre-commit-config
* Remove period from logging
* include url in unique_id
* update requirements_all.txt
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Added support for Minecraft SRV records
* Switched from dnspython to aiodns, improved server ping and log messages, use address instead of host and port in config flow
* Updated component requirements
* Fix state_automation_listener when new state is None (fix#32984)
* Listen to EVENT_STATE_CHANGED instead of using async_track_state_change
and use the event context on automation trigger.
* Share `process_state_match` with helpers/event
* Add test for state change automation on entity removal
* Use async_call_later for retrying, instead of async_track_point_in_time
* Normalize test filename renaming it to `test_sensor`
* Remove link to docs in docstring
* Adjust test results to new behavior with async_call_later
* Update firmware version in device registry.
Parse recevied OTA requests for firmware version and update device
registry.
* Update tests.
* Cleanup sw_id_update listener.
* Update ZHA test devices list.
* Add aircleaner and humidify service to nexia climate
* These were removed from the original merge to reduce review scope
* Additional tests for binary_sensor, sensor, and climate states
* Switch to signals for services
Get rid of everywhere we call device and change to zone or thermostat
as it was too confusing
Renames to make it clear that zone and thermostat are tightly coupled
* Make scene activation responsive
* no need to use update for only one key/value
* stray comma
* use async_call_later
* its async, need ()s
* cleaner
* merge entity platform services testing branch
* Updated tado integration climate.py to allow for presence change
* Updated tado integration __init__.py to allow for presence change
* Black formatting
* Added missing docstring
* Added missing period to docstring
* Using constants from climate component
* Filter out other preset_modes
* Linting error fix
* Isort error fix
* Filtering of unwanted presence mode in init
* Bumped python-tado version to 0.5.0
Removed unnecessary preset mode check
* Update requirements_all.txt
* Config flow for doorbird
* Discoverable via zeroconf
* Fix zeroconf test
* add missing return
* Add a test for legacy over ride url (will go away when refactored to cloud hooks)
* Update homeassistant/components/doorbird/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* without getting the hooks its not so useful
* Update homeassistant/components/doorbird/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix copy pasta
* remove identifiers since its in connections
* self review fixes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for Lutron Caseta occupancy/vacancy sensors
This follows updates to pylutron-caseta to add support for these
devices. This code works for me as a custom component in Home Assistant
Core with pylutron-caseta 0.6.0 (currently unreleased).
* black formatting
* Update requirements_all.txt
* Apply black formatting
* Resolve some review comments
* serial -> unique_id
* Black formatting
* Resolve linting errors
* Add code owner...
* Fix isort complaint
* Fix remaining isort complaints
* Update codeowners
* Resolve outstanding review comments
* Remove caseta_
* Modernize nuheat for new climate platform
* Home Assistant state now mirrors the
state displayed at mynewheat.com
* Remove off mode as the device does not implement
and setting was not implemented anyways
* Implement missing set_hvac_mode for nuheat
* Now shows as unavailable when offline
* Add a unique id (serial number)
* Fix hvac_mode as it was really implementing hvac_action
* Presets now map to the open api spec
published at https://api.mynuheat.com/swagger/
* ThermostatModel: scheduleMode
* Revert test cleanup as it leaves files behind.
Its going to be more invasive to modernize the tests so
it will have to come in a new pr
* Config flow for nuheat
* codeowners
* Add an import test as well
* remove debug
If the IP address of the harmony hub changed it would
not be rediscovered. We now connect to get the
unique id and then update config entries with
the correct ip if it is already setup.
* Add gate support to myq, fix bouncy updates
Switch to DataUpdateCoordinator, previously
we would hit the myq api every 60 seconds per device.
If you have access to 20 garage doors on the account it means
we would have previously tried to update 20 times per minutes.
* switch to async_call_later
* Add new integration: pvpc_hourly_pricing
to add a sensor with the current hourly price of electricity in Spain.
Configuration is done by selecting one of the 3 reference tariffs, with
1, 2, or 3 billing periods.
* Features config flow, entity registry, RestoreEntity, options flow
to change tariff, manual yaml config as integration or sensor platform
* Cloud polling sensor with minimal API calls (3/hour at random times)
and smart retry; fully async
* Only 1 state change / hour (only when the price changes)
* At evening, try to download published tomorrow prices, to always store
prices info for a window of [3, 27] hours in the future.
* Include useful state attributes to program automations to be run
at best electric prices.
* Add spanish and english translations.
* Requires `xmltodict` to parse official xml file with hourly prices
for each day.
* Update requirements and add to codeowners
* Avoid passing in hass as a parameter to the entity
Instead, create time change listeners in async_added_to_hass and
call async_generate_entity_id before async_add_entities
* Fix lint issues
* Add tests for config & options flow
* Add tests for manual yaml config
with entity definition as integration and also as a sensor platform
* Fix placement of PLATFORM_SCHEMA and update generated config_flows
* Store prices internally linked to UTC timestamps
- to deal with days with DST changes
- and work with different local timezones
* Add availability to sensor
to 'expire' the sensor if there is no connection available
and current hour is not in the stored prices.
Also, turn off logging and retrying if prices can't be downloaded
repeatedly, by flagging `data_source_available` as False, so there is no
log-flood mess.
* Add more tests
- to cover behavior in DST changes and complete coverage of sensor logic
- to cover abort config flow
* fix linter
* Better handling of sensor availability and minor enhancements
- Emmit 1 error if data source is marked as unavailable
(after some retries), and be silent until cloud access is recovered,
then emmit 1 warning.
- Follow standard of camel_case keys in attributes
* Mock aiosession to not access real API, store fixture data
- Store a set of daily xml files to test sensor logic for all situations
- Mock time and session to run tests with stored API responses
- Add availability test to simulate a lost + recovery of cloud access,
checking that logging is reasonable: 1 error to flag the continued
disconnection + 1 warning in recovery.
* Change API endpoint to retrieve JSON data
and remove xmltodict from reqs.
It seems that this endpoint is more reliable than the XML.
* Adapt tests to new API endpoint
* Translate tariff labels to plain English
and sync the default timeout value for all ways of configuration.
* Relax logging levels to meet silver requirements
- 1 warning when becoming unavailable, another warning when recovered.
- Warnings for unexpected TimeoutError or ClientError
- Move the rest to debug level, leaving info for HA internals
Also reduce number of API calls from 3 to 2 calls/hour.
* Fix requirements
* Mod tests to work with timezone Atlantic/Canary
and fix state attributes for timezones != reference, by using 3 price
prefixes: 'price_last_day_XXh', 'price_next_day_XXh' and 'price_XXh',
all generated with local time (backend timezone)
* Try to fix CI tests
* Externalize pvpc data and simplify sensor.py
* add new `aiopvpc` to requirements
* Remove data parsing and price logic from here
* Replace some constant properties with class variables
* Simplify tests for pvpc_hourly_pricing
* Fix updater for options flow
* Updater always reloads
* `tariff` value comes 1st from entry.options, 2nd from entry.data
* Fix lint
* Bump aiopvpc
* Remove options flow and platform setup
- Remove PLATFORM_SCHEMA and async_setup_platform
- Generate config_entry.unique_id with tariff instead of entity_id, in flow step.
- Remove TariffSelectorConfigFlow
- Adapt tests to maintain full coverage
* Fix docstring on test
and rename SENSOR_SCHEMA to SINGLE_SENSOR_SCHEMA to avoid confusion
* Remove timeout manual config, fix entry.options usage, simplify unique_id
* Simplify tests
- No need for a test_setup now, as platform setup is removed and integration
setup is already used in `test_availability`
- Simplified `_process_time_step`: only one async_fire(EVENT_TIME_CHANGED)/hour
* Fix possible duplicated update
when source is not available.
* Do not access State last_changed for log messages
* Do not update until entity is added to hass
and call to async_update after 1st download or when recovering access, so
async_write_ha_state is not called twice on those.
* minor changes
* Rename method to select current price and make it a callback
* General code cleanups for lutron_caseta component
* black
* Update homeassistant/components/lutron_caseta/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* filter out additional app config names from pyvizios app list
* add test
* change where filtering app list occurs
* fix test
* fix mistake in change
* hopefully final test fix
* fix test scenario that unknowingly broke with test change
* Clear state on exception
Clear state if querying the device fails. The state is then set to unknown, so it can be tracked if a miflora device isn't responding any more.
* Add available()
Signal valid data via available()
* miflora: add timeout to go unavailable
* code cleanup
* miflora: tox cleanup
* Fix scheduled update time-drift in data update coordinator
As next schedule is calculated **after** the update is done,
setting now + update_interval makes 1 second drift in practice,
as the tick is 1Hz.
* Floor the utcnow timestamp
to remove sub-second error precision, and generate constant frequency updates
as long as the update takes < 1s.
* Fix tankerkoenig with more than 10 stations
There seemed to be a problem, if more than 10 fuel stations were tracked.
Added a warning in this case, and split the calls to the API in chunks of
10, so that the data can be fetched anyway.
* Update homeassistant/components/tankerkoenig/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Split ZHA device loading and entities adding.
Load zha devices from ZHA gateway, but add entities after integration
was setup.
* Use hass.loop.create_task()
* Split ZHA device initialization from loading.
Restore and initialize ZHA devices separately.
* Use hass.async_create_task()
Load devices prior group initialization.
* Fix tankerkoenig with more than 10 stations
There seemed to be a problem, if more than 10 fuel stations were tracked.
Added a warning in this case, and split the calls to the API in chunks of
10, so that the data can be fetched anyway.
* Update homeassistant/components/tankerkoenig/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Split ZHA device loading and entities adding.
Load zha devices from ZHA gateway, but add entities after integration
was setup.
* Use hass.loop.create_task()
* Split ZHA device initialization from loading.
Restore and initialize ZHA devices separately.
* Use hass.async_create_task()
Load devices prior group initialization.
* Validate UUIDs against custom validator
Instead of just validating against strings, use a custom validator,
so that the format can be checked.
* Add tests for custom UUID4 validator
* Add support for nexia automations
Bump nexia to 0.7.1
Start adding tests
Fix some of the climate attributes that were wrong (discovered while adding tests)
Pass the name of the instance so the nexia UI does not display "My Mobile"
* fix mocking
* faster asserts, scene
* scene makes so much more sense
* pylint
* Update homeassistant/components/nexia/scene.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* docstring cleanup
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add a config flow for myq
* Discovered by homekit
* Fix gates being treated as garage doors
* Offline devices now show as unavailable
* Homekit flow
* strip out icon
* return -> raise
* Modernize nuheat for new climate platform
* Home Assistant state now mirrors the
state displayed at mynewheat.com
* Remove off mode as the device does not implement
and setting was not implemented anyways
* Implement missing set_hvac_mode for nuheat
* Now shows as unavailable when offline
* Add a unique id (serial number)
* Fix hvac_mode as it was really implementing hvac_action
* Presets now map to the open api spec
published at https://api.mynuheat.com/swagger/
* ThermostatModel: scheduleMode
* Empty commit to re-run ci
* Revert test cleanup as it leaves files behind.
Its going to be more invasive to modernize the tests so
it will have to come in a new pr
Add new "amcrest.ptz_control" service to specify a PTZ camera movement or zoom direction (up, down, right, left, right_up, right_down, left_up, left_down, zoom_in, zoom_out). An optional travel_time attribute specifies the amount of movement between start/stop.
* Wait for cloud connection
* Just wait
* Remove redundant entry
* Drop webhook before unloading other platforms
* Add missing scope
* Update homeassistant/components/netatmo/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Wait for cloud connection
* Just wait
* Remove redundant entry
* Drop webhook before unloading other platforms
* Add missing scope
* Update homeassistant/components/netatmo/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add tests for states of the sensors
* Revert async_update method
* Tests improvement
* Fix icon name
* Tests improvement
* Simplify tests
* Test improvement
* Patch the library instead of the coordinator
* Suggested change
* Remove return_value
* Convert amcrest binary sensors from poll to stream
- Bump amcrest package to 1.6.0.
- For online binary sensor poll camera periodically to test communications in case
configuration & usage results in no other communication to camera.
- Start a separate thread to call camera's event_stream method since it never returns.
- Convert all received events into signals that cause corresponding sensors to update.
- Use camera's generic event_channels_happened method to update sensors at startup,
and whenever camera comes back online after being unavailable.
* Changes per review
* Changes per review 2
* Changes per review 3
- Move event stream decoding to amcrest package.
- Change name of event processing threads so global
counter is no longer required.
- Bump amcrest package to 1.7.0.
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* Update powerwall unique id
* Fix somfy optimistic mode when missing in conf (#32995)
* Fix optimistic mode when missing in conf #32971
* Ease code using a default value
* Client id and secret are now inclusive
* Bump aiohomekit to fix Insignia NS-CH1XGO8 and Lennox S30 (#33014)
* Axis - Fix char in stream url (#33004)
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* deCONZ - Add support for Senic and Gira Friends of Hue remote… (#33022)
* Update the test
* Harmony config flow improvements (#33018)
* Harmony config flow improvements
* Address followup review comments from #32919
* pylint -- catching my naming error
* remove leftovers from refactor
* Update powerwall unique id
* Update the test
Co-authored-by: tetienne <thibaut@etienne.pw>
Co-authored-by: Jc2k <john.carr@unrouted.co.uk>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Merge nexia
* Restore original work
* Merge cleanups
* config flow
* Add config flow
* Add missing files
* Fix import of old yaml config
* More cleanups from self review
* Additional self review
* Update homeassistant/components/nexia/services.yaml
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix io in event loop
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* avoid using ternary statements if they span multiple
* Cleanup strings and remove unneeded attributes
* more cleanup
* more cleanup of yaml
* remove coordinator boiler plate
* nuke services for now for the inital pr, add back later
* remove copy pasta
* this can be reduced more
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* review
* comments
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* more review adjustments
* nuke unused constants
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* map states
* add update
* zone id is unique
* Fix humidfy check
* target_humidity should be a property instead of in attributes
* remove aux heat as its already there
Co-authored-by: Ryan Nazaretian <ryannazaretian@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* Config flow for harmony
* Fixes unique ids when using XMPP
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
* Find the unique id for the config flow
* move shutdown to init
* Add test for ssdp (still failing)
* Fix ssdp test
* Add harmony to MIGRATED_SERVICE_HANDLERS (this is a breaking change)
* more cleanups
* use unique id for the config file
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
The existing sensor icons, while descriptive - dead = dead - are perhaps too matter of fact and don't accurately convey the tragedy. I changed emoticon-dead-outline to emoticon-cry-outline, as I think it better conveys the reality of the situation along with the emotions tied to the statistic.
* Fix iCloud init while pending
Continue if device is pending while setup
Create devices and fetch 15s if pending, otherwise determine interval to fetch.
* Add retried_fetch guard
The existing sensor icons, while descriptive - dead = dead - are perhaps too matter of fact and don't accurately convey the tragedy. I changed emoticon-dead-outline to emoticon-cry-outline, as I think it better conveys the reality of the situation along with the emotions tied to the statistic.
* Fix iCloud init while pending
Continue if device is pending while setup
Create devices and fetch 15s if pending, otherwise determine interval to fetch.
* Add retried_fetch guard
* here_travel_time: Add modes arrival and departure
* convert arrival/departure from datetime to time
* Default departure is set by external lib on None
* Use cv.key_value_schemas
* Initial commit
* Restricting conditions by supported_features, drop pending condition
* Added tests for no and minimum amount of conditions
* Address review comments
* Sort impors with isort
* Sort impors with isort v2
* Add 'Yeelight LED Ceiling Light' model
Add new model https://www.yeelight.com/en_US/product/luna
* Update requirements_all.txt bump to yeelight 0.5.1
Update requirements_all.txt bump to yeelight 0.5.1
* Update manifest.json, bump to 0.5.1
Update manifest.json, bump to 0.5.1
* set alarmdecoder code_arm_required to False
* rm unnecessary f strings
* add code_arm_required config option
* add self as codeowner :-)
* add self as codeowner the right way
* Updating SynologySRM device trakcers to show additional information
* Fixes
* Aliasing attributes to snake case
* Sugguested changes as per MartinHjelmare
* add feet to meter conversion
* convert pressure and wind. fix wind for metric.
* dont convert wind speed in metric.
pymetno already converts it.
* add units to setup_platform constuctor
* Add tests for several devices
* Update coveragerc
* Code review changes and minor clean up
* More code review changes
* Update manifest and minor test updates
* Add test for locks and covers
* Add tests for switch on and off
* Add more complete test for alarms
* Fix for camera test
* Patch abodepy.mode for tests
* Add test for unknown alarm state and minor cleanup
* Update to make tests more robust
* More specific tests
* Update quality scale to silver
* Remove integration quality scale
* Add model to rachio device info
Address followup items
* Address review items, retest zone updates back and forth, and standby mode
* Remove super
* Revert "Remove super"
This reverts commit 02e2f156a9.
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/rachio/binary_sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Require a hyphen in lovelace dashboard url
* Keep storage dashboards working
* register during startup again
* Update homeassistant/components/lovelace/dashboard.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Comments
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Catch asyncio.TimeoutError, show a proper message instead
* Throttle updates to max once per 30s
* Change code owner
* Fix CODEOWNERS + linting
* Warn on connection timeout
* Require a hyphen in lovelace dashboard url
* Keep storage dashboards working
* register during startup again
* Update homeassistant/components/lovelace/dashboard.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Comments
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Catch asyncio.TimeoutError, show a proper message instead
* Throttle updates to max once per 30s
* Change code owner
* Fix CODEOWNERS + linting
* Warn on connection timeout
* Do not fail when a user has a controller with shared access on their account
* Add config flow for rachio
Also discoverable via homekit
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Split setting the default run time to an options flow
Ensue the run time coming from yaml gets imported into the option flow
Only get the schedule once at setup instead of each zone (was hitting rate limits)
Add the config entry id to the end of the webhook so there is a unique hook per config entry
Breakout the slew of exceptions rachiopy can throw into RachioAPIExceptions
Remove the base url override as an option for the config flow
Switch identifer for device_info to serial number
Add connections to device_info (mac address)
* rename to make pylint happy
* Fix import of custom_url
* claim rachio
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* emulated_hue: Optimize is_entity_exposed
Switch all list transversals in is_entity_exposed to
hash lookups
get_deprecated is now only called if explict_expose is
set
This funciton was iterating multiple lists per enitity
every time there was an update. It was responsible for
a chunk of execution time when there are large number
of entities in home assistant.
* Complete deprecation of ATTR_EMULATED_HUE attribute
* Complete deprecation of ATTR_EMULATED_HUE attribute (remove const)
* Remove ATTR_EMULATED_HUE_HIDDEN and Rewrite tests
* Extend rtorrent sensor functionality.
* Remove blank line from end of file.
* After using black formatter.
* Update sensor.py using snake_case for variable names.
* Update PR by using true value in condition.
* move apps configuration to options flow
* add additional assertion to new test
* add additional assertions for options update
* update docstrings, config validation, and tests based on review
* Add set_memo_text service
* Apply template rendering for memo text
* Update constants to comply to naming conventions
* Local variable for module address and extended error description
* fixed typo
* Use platform tag to register components on hue SensorManager
instead of a boolean flag to decide between sensor and binary sensor,
so it could be used externally (or to get ready for inclusion of other comps)
* Make new item discovery platform agnostic for SensorManager
instances whenever the volume was requested a division calculation was made
resulting in a TypeError. The volume adjustment from `0-100` to `0-1` is now
calculated during the `update()` method.
* Fix delijn sensor stuck on last passage
If the returned passage is an empty list that means there are
no next passages, so the sensor should be updated accordingly
* Mark the sensor as unavailable instead of emptying data
* use available property
* add available property
instances whenever the volume was requested a division calculation was made
resulting in a TypeError. The volume adjustment from `0-100` to `0-1` is now
calculated during the `update()` method.
* Add limit parameter to service call methods
* Break out prep part of async_call_from_config for use elsewhere
* Minor cleanup
* Fix improper use of asyncio.wait
* Fix state update
Call change listener immediately if its a callback
* Fix exception handling and logging
* Merge Script helper if_running/run_mode parameters into script_mode
- Remove background/blocking _ScriptRun subclasses which are no longer needed.
* Add queued script mode
* Disable timeout when making fully blocking script call
* Don't call change listener when restarting script
This makes restart mode behavior consistent with parallel & queue modes.
* Changes per review
- Call all script services (except script.turn_off) with no time limit.
- Fix handling of lock in _QueuedScriptRun and add comments to make it
clearer how this code works.
* Changes per review 2
- Move cancel shielding "up" from _ScriptRun.async_run to Script.async_run
(and apply to new style scripts only.) This makes sure Script class also
properly handles cancellation which it wasn't doing before.
- In _ScriptRun._async_call_service_step, instead of using script.turn_off
service, just cancel service call and let it handle the cancellation
accordingly.
* Fix bugs
- Add missing call to change listener in Script.async_run
in cancelled path.
- Cancel service task if ServiceRegistry.async_call cancelled.
* Revert last changes to ServiceRegistry.async_call
* Minor Script helper fixes & test improvements
- Don't log asyncio.CancelledError exceptions.
- Make change_listener a public attribute.
- Test overhaul
- Parametrize tests.
- Use common test functions.
- Mock timeout so tests don't need to wait for real time to elapse.
- Add common function for waiting for script action step.
* Add config flow to Freebox
* Add manufacturer in device_tracker info
* Add device_info to sensor + switch
* Add device_info: connections
* Add config_flow test + update .coveragerc
* Typing
* Add device_type icon
* Remove one error log
* Fix pylint
* Add myself as CODEOWNER
* Handle sync in one place
* Separate the Freebox[Router/Device/Sensor] from __init__.py
* Add link step to config flow
* Make temperature sensors auto-discovered
* Use device activity instead of reachablility for device_tracker
* Store token file in .storage
Depending on host if list of Freebox integration on the future without breaking change
* Remove IP sensors + add Freebox router as a device with attrs : IPs, conection type, uptime, version & serial
* Add sensor should_poll=False
* Test typing
* Handle devices with no name
* None is the default for data
* Fix comment
* Use config_entry.unique_id
* Add async_unload_entry with asyncio
* Add and use bunch of data size and rate related constants (#31781)
* Review
* Remove useless "already_configured" error string
* Review : merge 2 device & 2 sensor classes
* Entities from platforms
* Fix unload + add device after setup + clean loggers
* async_add_entities True
* Review
* Use pathlib + refactor get_api
* device_tracker set + tests with CoroutineMock()
* Removing active & reachable from tracker attrs
* Review
* Fix pipeline
* typing
* typing
* typing
* Raise ConfigEntryNotReady when HttpRequestError at setup
* Review
* Multiple Freebox s
* Review: store sensors in router
* Freebox: a sensor story
* Clean up use of get_characteristic_types
* Get rid of get_hk_char_value helper
* Get rid of _update_fn callbacks
* Call async_write_has_state directly as async_state_changed doesnt do anything any more
* cleanup timer handle when device is removed
* separate unavailable times for mains vs battery
* better name
* remove light refresh handle when removing light
* remove unused parallel updates
* don't steal HA const for different purpose
* don't flood network every hour for lights
* update test to test both intervals
* add test for light refresh interval
* fix tests
* update test
* put parallel updates back for now...
* fix async_schedule_update_ha_state usage
* review comment
* review comment
* update test - review conversation
* review comments
* await count not call count
* flip some state
* adkj
* reduce
* Convert august to async
Async io was added to py-august 0.24
* Fix lint
* Lock operation sensors for august
* Tracking lock operation method allows user presence detection at the lock
* revert lock changes
* fix activity count merge conflict reversion
* Fix revert that come back with the conflict
* Start webhook implementation
* Add webhook implementation
* Bump pyatmo 3.2.5
* Fire event after data evaluation
* Setup webhooks after components
* Fix logging
* Wrap non async call
* Wrap non async call
* Add smoke detector and door tag webhook support
* Catch when webhook registration fails
* Log to debug
* Fix persons lookup
* Add dependency
* Remove false requirements
* Fix requirements
* Replace netatmo events by a single one
* Slim down code
* Clean up code
* Address review vomments
* Undo attribute removal
* Bump pyatmo to v3.3.0
* Only create webhook id once and reuse
* Store and reuse cloudhook url
* Wait for hass core to be up and running
* Register webhook once HA is ready
* Delay webhook registration
* Use f-strings in integrations starting with "M"
* Format mqtt light init with black
* Fix lint error
* Fix pylint error
* Restore constants
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Format with Black
* input_datetime guard for unexpected state
If state is a time and has_date = true, or the other way around, restore state would error
* Update __init__.py
* Add test
* Fix for door_lock_state attribute error
* Updates based on review comments
* Remove update_time
* Remove update time in lock
* Remove update time in sensor
* Remove unused variable
* Change return for device_state_attributes
* Add griddy integration
* Griddy is a wholesale power provider in Texas
* Supports all four load zones in Texas
* Provides real time power price which is useful for automations to handle demand response
* Update homeassistant/components/griddy/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/griddy/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Add ability request updated via entity update service.
* Improve error message about already configured
* Remove DEVICE_CLASS_POWER since we do not have a device class for cost
* remove setdefault that was left from previous refactor
* More detail on data naming
* Bump translation for testing
* git add the config flow tests
* s/PlatformNotReady/ConfigEntryNotReady/
* Review items
* git add the other missing file
* Patch griddypower
* reduce
* adjust target
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Fetch iCloud devices again if the status is pending
* Remove "No iCloud device found" double check
* fix default api_devices value
* Remove useless unitialisation declarations
* Add support for melcloud Air-to-Water devices
* Add water_heater entity for the water heater component.
* Add individual climate entities for 0-2 supported radiator zones.
* Add sensors for zone room temperatures, outdoor temperature and tank
temperature.
* Update .coveragerc
* Use device_state_attributes
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Complete state_attributes -> device_state_attributes migration
* Move constants to top of file
* Remove async_turn_on/off
* Drop mac from ATW unique_ids
* Add MAC to device_info connections
* Remove redundant ABC inheritance
* Update homeassistant/components/melcloud/water_heater.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added support for newer SamsungTV models
* Fixed legacy port
* store token in HA config directory
* Change token name
* rebasing and exception handling
* implement update
* fix error creating mediaplayer
* Debug logging
* Increase timeout
* Restore update timeout
* Store token_file path in config_entry
* Introduction of samsung bridge class
* Added bridge class functions
* Code cleanup
* more fixes
* Begin testing
* samsungtvws 1.2.0
* Config flow tests 0.1
* Fixed some mediaplayer tests
* Fixed fixture in media player
* use of constants and turn off
* more media player tests
* samsungtvws 1.3.1 and other fixes
* WS tv update rewritten
* more tests
* test_init
* fixed tests
* removed reset mock
* tests reset mock
* close_remote and tests
* deprecate port config
* deprecate port config 2
* deprecate port config 3
* save token only if needed
* cleanup
* better websocket protocol detection
* config removal
* Breakout tado zone code into a single place
* Resolve various incorrect states and add tests for known tado zone states
* Fix home and away presets
* Upgrade to PyTado 0.4.0 which improves http performance and fixes setting fan speed.
* Write state instead of calling for an update
* adjust codeowners
* Add tests for michael's tado and fix heatingPower.value
* Guards are much cleaner
* Adjust per review
* Remove hass passing
* Add a commit interval setting to recorder
* Make the default every 1s instead of immediate
* See attached py-spy flamegraphs for why 1s
* This avoids disk thrashing during event storms
* Make Home Assistant significantly more responsive on busy systems
* remove debug
* Add commit forces for tests that expect commits to be immediate
* Add commit forces for tests that expect commits to be immediate
* make sure _trigger_db_commit is in the right place (all effective "wait_recording_done" calls)
* De-duplicate wait_recording_done code
* alexa/capabilities.py: Fix TypeError Exception
- Remove division by zero try/catch -- there is no division
- Handle TypeError exception when current_volume = None
- Simplify math and return logic
* Add test for Alexa.Speaker's valid volume range
* Bump aiohomekit to get better reconnection handling and cleaner shutdowns.
* Read the ACTIVE characteristic and set ok/problem state
Also gets test coverage to 100%.
* Update Steam intergration to list screenshot paths and Steam game ID
* Steam entity_picture now changed to game art when in-game
* Steam - changing API endpoints to constants
* Steam - formatting code for lint
* Update sensor.py
*Removing entity_picture image switching based on current playing game
* Steam - tidying up code
* Update homeassistant/components/steam_online/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Update PyUbee to 0.9
Adds support for Ubee Router DVW32CB
* Add support for Ubee Router DVW32CB
* Update pyubee to 0.9
Adds support for router DVW32CB
* Refactor zha core device _check_available().
Make it async, so we don't run it in a sync worker.
* Use random keep alive interval for zha device pings.
* Update tests.
* Update Yandex transport after API change (home-assistant#32431)
* Update mocked response for test (home-assistant#32431)
* Codestyle fixes (home-assistant#32431)
* multi attribute reads for lights
* catch specific exceptions
* get attributes
* fix mains powered update
* add guards and use get_attributes
* use debug for read failures
* cleanup
* update return value for read_attributes
* fix on with timed off
* specify rtsp_transport for onvif camera
* remove used variable
* Update homeassistant/components/stream/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* change options to stream_options
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
This commit add those new modes with avaibility to select mode and params in service call.
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
Update service helper for new avaibility to select mode and params in service call.
* RelativeMode as default move_mode to avoid breakchange
RelativeMode as default move_mode to avoid breakchange
* add missing attribute
add missing continuous_duration attribute
* change service attribute label for continuous_duration
* update description
fix wrong assertion for move_mode attr description
* Update services.yaml
* Update services.yaml
fix wrong wording for move_mode
* Update camera.py
Using defined constants instead of raw strings in conditions
* Update camera.py
Replace integer to floating point in logger debug PTZ values
* Update services.yaml
* Update services.yaml
* Update camera.py
* Update camera.py
* use dict[key] for required schema keys and keys with default schema values
* remove async for setup_ptz method
* lint error
* remove unecessary PTZ_NONE = "NONE"
changed request by @MartinHjelmare
* addressing @ MartinHjelmare comments
- Remove None in defaluts and dicts
- Replace long if blocks
* remove NONE
* lint issue
* Update camera.py
* Fix lint error - typo
* rename onvif_ptz service to just ptz
* rename onvif_ptz service to just ptz
* use dict[key] when default values are set
use service.data[key] instead of service.data.get[key] when default value is set in service schema
* adresse comment: use dict[key] for pan tilt zoom
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add app support
* code cleanup, add additional test, add CONF_APPS storage logic for import
* simplify schema defaults logic
* remove unnecessary lower() and fix docstring
* remove default return for popping CONF_APPS during import update because we know entry data has CONF_APPS due to if statement
* further simplification
* even more simplification
* fix type hints
* move app configuration to separate step, fix tests, and only make app updates if device_type == tv
* remove errors variable from tv_apps and move tv_apps schema out of ConfigFlow for consistency
* slight refactor
* remove unused error from strings.json
* set unique id as early as possible
* correct which dictionary to use to set unique id in pair_tv step
* Returns an unencrypted location of all persons with device trackers
* Handle encrypted messages and exclude the poster's location
* Friends is by default False. Reformats with Black
* Updates the context init to account for the Friends option
* Fix Linter error
* Remove as a config option
* No longer imports encyrption-related functions in encrypt_message
* Fix initialization in test
* Test the friends functionality
* Bugfix for persons not having a location
* Better way to return the timestamp
* Update homeassistant/components/owntracks/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Linting and tid generation
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bugfix: correctly handle non-UTC TZs
* bugfix: system mode is always permanent
* bugfix: handle where until is none
* tweak: improve logging to support above fixes
* Fetch iCloud devices again if the status is pending
* Remove "No iCloud device found" double check
* fix default api_devices value
* Remove useless unitialisation declarations
* added presets for switch devices
* added channel type to __init and const
* ran pylint on library so needed a few changes in names
* removed callback
* bool -> cv.boolean
* Add attribute
latest release tag
* add attrs =
and only create attr Tag if exists
made requested changes
* change condition for _latest_release_tag
to use self._github_data.latest_release_url
* Correct changes
* Update sensor.py
* blackify
* Emoncms API provides a Unit
The EmonCMS API has been amended to include a 'unit' as part of it's payload. By using this information, all the sensors can be created without the need for individual sensors to be setup by type.
The change is backward compatible so if a unit type has been specified in the configuration, this will be used by default.
If no unit is pecified either by the Home Assistant configuration, or the Emoncms API, then the default of W will be used as before.
* Update sensor.py
Check the 'unit' key is in the API call. Older systems may not have that key in the payload.
* Modified approach with new configuration item
* Removed new config item
Removed the configuration item. The integration attempts to get the unit from the API.
If this fails *or* the unit key of the API is blank, either the specified unit, or the default will be used.
If approved, documentation will be updated.
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Apply suggestions from code review
* Apply suggestions from code review v2
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update sensor.py
Update `config_unit`
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* [soundtouch] workaround for API bug when removing multiple slaves from a zone at once
* [soundtouch] added additional attributes exposing multiroom zone info
* Fix update with slave entities
* Add zone attributes test
* Fix and clean up tests
* Fix typo
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add edl21 component for SML-based smart meters
* edl21: Remove unused variable
* [edl21] Add 1 minute throttle to the sensor
* Update homeassistant/components/edl21/manifest.json
Fix documentation URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Move imports to top
* edl21: Remove special case for STATE_UNKNOWN, which replicated default behavior
* edl21: Implement blacklist for and warn about unhandled OBIS values
* edl21: Make blacklist global
* edl21: Add filter to issues URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Rename device to entity
* edl21: Don't schedule async_add_entities
* edl21: Use dispatcher, implement own throttling mechanism
* edl21: Simplify keeping track of known obis
* edl21: Use whitelist for state attributes
* edl21: Remove dispatcher on shutdown
* edl21: Convert state attributes to snakecase
* edl21: Annotate handle_telegram with @callback
* edl21: Call async_write_ha_state instead of schedule_update_ha_state
Co-authored-by: David Straub <straub@protonmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Allow string values on zwave.set_node_value
This allows for:
* Accessing longer value_ids. In some cases, value ids in z-wave nodes are very large (17 digits in my case). Passing them as int does not seem to work well (python probably truncates the number), but passing them as string works fine
* Changing color values, which are represented as hex string
reformat test
* update services.yaml with string set_node_value
The documentation for google_travel_time was at odds with the
implementation. The documentation stated a default scan time of
5 minutes, but the implementation was using Throttle which resulted
in the sensor updating at a maximum rate of one API call every
5 minutes. This was especially at odds with a given example at
the end of the documentation, which showed updating the sensor
every 2 minutes during commute times.
This change brings the implementation in line with the docs by
adopting the `SCAN_INTERVAL` constant set to the stated default
of 5 minutes and removing the Throttle.
* Update image_processing.py
Adds save timestamp file and adds last_detection attribute
* Update test_image_processing.py
Adds test
* Adds assert pil_img.save.call_args
* Test timestamp filename
* Add test bad data
* Update test_image_processing.py
* Fix bad image data test
* Update homeassistant/components/sighthound/image_processing.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Reduce log level for initial error and bump library version
* Use new buienradar library version which reduces the log level
for some types of warnings.
* Initially logs at a lower level and only logs at WARN for repeated
errors.
This should serve to reduce confusion with users such as in
issue #32301.
* Fix linter error with new linter settings.
* Fix linter warning
* Update homeassistant/components/buienradar/util.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* code quality improvements
* code quality improvements and fixed tests
* explicitly set unique ids
* improve unique id creation
* remove entities from entity registry
* added test for removing entities from entity registry
* revert entity registry handling from sensor and test code
* check for entity registry removal in geolocation test case
* make import absolute; isort
* change quality scale
* add is_muted property and update tests
* black
* manually set is_muted on async_mute_volume calls to set state early
* combine two lines into one
* set is_muted to None when device is not on
* Flume Cleanups
* Sensors now show the name
* include_devices and exclude_devices are now available in the config.
* Address review items
* bump as 0.3.0 is published
* Move keypad battery implementation details into py-august
* Upgrade to py-august 0.22.0 which also adds gen2 doorbell battery data
* remove cruft from previous refactor
* refactoring for multi platform
* adopted test_bridge to refactoring
* refactoring tests for multi-platform
additional coverage in config and init
* comment for clarity
* more specific imports from lib
* library version bump
* removed async_update
* changed parameter order to start with hass
* removed pylint disable
* unsubscribe from signal dispatcher
inherit from Entity
* use device.unique_id
* changed hass_obj to hass
* added test for remove entity
bug fix from the test
* removed the polling try_connect. hate polling... it is now part of the async_setup()
significantly makes the code clearer and simplifies the tests
* removed leftover debug logs in the library
* changed tests to get the entry_id from hass
* changed place to assign hass.data only after success
* fixes for test_init
* removed assert
* removed device_info
* removed bridge internal from common
* modified test_bridge to work without the bridge directly
* removed bridge from test_existing_update
* changed update to not use bridge internals
* dyn_bridge fixture no longer used - removed
* Initial version
Parse configuration, but return a fixed value
* Add basic functionality
Request real data from the server
Currently the prices are not getting updated, but the petrol station
data is real
* Update values regularly
The tankerkoenig values get updated regularly with real data.
* Move base functionality for the sensor to a base class
And move that to an own file, so that it can be inherited
* Reduce calls to tankerkoenig api
Use a master/slave concept for sensors; one master gets the data and
updates it into the slaves.
* Update requirements files
* Update all gas stations at once
* Remove tests directory
Currently there are no tests for the integration; will be added in
a future commit.
* Fix slaves not being updated
Let the base class regularly poll, so that slaves are also updated
* Refactor entity creation
Create an auxiliary method to add a station to the entity list,
in preparation to allowing extra stations.
* Add possibility to manually add stations
Add a new configuration option "stations" to manually add extra stations
* Fix style issues
Make the code more pythonic
* Remove redundant code
Implement suggestions from the code review
* Change to platform component
Remove the master/slave concept, in favor of a platform with dummy sensors.
The platform takes care of contacting the server and fetching updates
atomically, and updating the data on the sensors.
* Rename ATTR_STATE
Rename the attribute to "IS_OPEN", to avoid confusion with the sensor state.
* Minor updates
Combine two consecutive error logs into a single one.
Update the sensor's icon
* Separate address into different fields
* Style updates
Use "[]" syntax instead of ".get()" for required parameters
Use warning log level for not available fuel types
* Implement review comments
Fix style issues
Improve error messages
Remove redundant options
* Refactor using DataUpdateCoordinator
Use the new DataUpdateCoordinator to fetch the global data from
the API, instead of implementing an own method.
Also fix comments from the PR
* Implement PR comments
Implement suggestions to improve code readability and keep the Home Assistant style.
Also separate fetching data to an async thread
* Add a shadow for covers that do not support postion
* Rename shadow as optimistic
* Set optimisic default mode
* fix black error
* Remove redundant check
* optimisitc variable name consistency with config
* Various code review items from previous PRs
* Add a test for fetching the doorbell camera image
* Switch to using UNIT_PERCENTAGE for battery charge unit
* Add tests for changed_by
* Allow managing Lovelace storage dashboards
* Make sure we do not allow duplicate url paths
* Allow setting sidebar to None
* Fix tests
* Delete storage file on delete
* List all dashboards
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
* change state to latest_release_url
to have a meaningful frontend representation.
self._github_data.latest_commit_sha is still available in the attributes, so no info is lost
* template state to show only the tag
and not the full url to the tag
* add guard to update(self) for state
* add empty line 150
black...
* Update sensor.py
* add SHA if no release url
* Correct sha to 7 digits
* take out fallback on state
* Add Avri waste collection sensor
* Apply black formatting
* Update manifest
* Add requirements
* Add sensor to coverage
* Update import order
* Bump dependency to include todays pickup
* Bump avri version in requirements_all.txt
* Code review comments
* Reduce scan interval to 4 hours
This makes sure that no matter what happens, in
the morning the correct dates have been pulled
without the old ones lingering for too long.
* Better logging
* Made scan interval a timedelta
* Fix import order
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Use filter instead of break statement
* Use positive int for house number extension
* Switch voluptuous types for house number and house number extension
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Implement `available`
* Bump avri api
* Code review comments
* Replace `postcode` with `zip_code`
* Update logic for `available`
* Remove variable for delimiter
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* added entry listener that reloads the component
* fixed update with existing entry
* fixed import in test
* fixes
* library version
* removed unique_id
* fix
* fixed for no entries in hass.data
* fixed return value on abort
* moved to use async_entries
* removed unused import
* support pairing through config flow
* simplify import failure log messages
* remove unnecessary list comprehension
* bump pyvizio to add passing ClientSession in where it was missed
* show different message if user completes pairing through import
* remove dupe failure message since reasons for failure are the same in both instances
* remove extra constant
* add host reachability check during pairing workflow
* revert redundant connection check since check is implicitly done during pairing process
* fix rebase errors
* fix string
* updates based on review
* update docstring
* missed commit
* update import confirmation message to be less wordy
* use ConfigFlow _abort_if_unique_id_configured
* fix test
* Removing polling from august
* Now using subscribers to the detail and activity
* Fix hash to list keys
* continue to the next house if one fails
* Add async_signal_device_id_update
* Fix double initial update
* Handle self.hass not being available until after async_added_to_hass
* Remove not needed await
* Fix regression with device name
When battery sensors gets created before other platforms loading deconz sensors gets created first the other platform would not create entities related to those battery sensors
When battery sensors gets created before other platforms loading deconz sensors gets created first the other platform would not create entities related to those battery sensors
* async_step_user to async_configure
* fix for lint
* fix for pylint
* fix isort and black
* fix miss-fixed black
* fixing for the python37 coverage
* fix transmission definition
* fix for Black formatting
* fix type to abort
* clean up
* clean up for the test
* fix for the test
* refactor
* split test_flow_works to three tests
* revert the assert
* remove whitespaces for flake8
* apply patch function
* fix for the patch
* fix for the black
* remove mock_coro
* fix for the black
* hue to heos
* try to fix import
* fix for the black
* revert try to fix import
* Add a pytest fixture
* fix for the black
* Reduce August doorbell detail updates
* Doorbell images now get updates from the activity feed
* Tests for activity updates
* py-august now provides bridge_is_online for available state
* py-august now provides is_standby for available state
* py-august now provides get_doorbell_image (eliminate requests)
* remove debug
* black after merge conflict
* Centralize august activity updates
* Updates appear significantly more responsive
* Should address the community complaints about "lag"
* Reduce detail updates (device end points) to one hour interval
* Signal entities to update via dispatcher when new activity arrives
* Resolves out of sync state (skipped test is now unskipped)
* pylint
* fix merge conflict
* review comments
* Remove stray
* Address review items that can be done without refactor
* Reduce August doorbell detail updates
* Doorbell images now get updates from the activity feed
* Tests for activity updates
* py-august now provides bridge_is_online for available state
* py-august now provides is_standby for available state
* py-august now provides get_doorbell_image (eliminate requests)
* remove debug
* black after merge conflict
* Config Flow for sense
* Fix unique ids so they are actually unique (and migrate the old ones)
* Fix missing solar production
* Do not mark sensors available until they have data
* Address review items
* Address review round #2
* dedup config flows
* use default (imported) options until user goes thru options flow
* address pr feedback
* correct key used to distinguish pro model
* [recorder] Use orjson to parse json faster
* Remove from http manifest
* Bump to orjson 2.5.1
* Empty commit to trigger CI
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* dedup config flows
* use default (imported) options until user goes thru options flow
* address pr feedback
* correct key used to distinguish pro model
* Add observed entities to bayesian sensor
* Update binary_sensor.py to comply with style guidelines and test_binary_sensor.py to verify the entity_id
* Update binary_sensor.py and test_binary_sensor.py to include an additional attribute for observed entities
* Use of ATTR_ENTITY_ID and numeric key of observed entity
* Update binary_sensor.py
* Update test_binary_sensor.py to verify behavior
* Update to return a list without duplicates in the state attribute
* Update binary_sensor.py: rename of ATTR_ENTITY_ID into ATTR_OBSERVED_ENTITIES
* Rename new attribute into ATTR_OCCURRED_OBSERVATION_ENTITIES and fix test
* Migrate HomematicIP Cloud services to admin services
* remove unused dict
* vacation and eco mode are usable by users
* add verify_domain_control, make service user accessible
* Remove friendly_name attribute twitch sensor
* Use deepcopy to only copy the content
* Update homeassistant/components/twitch/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/twitch/sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use f-strings in integrations starting with F
* Use f-strings in tests for integrations starting with F
* Use f-strings in integrations starting with G
* Use f-strings in tests for integrations starting with G
* Fix pylint error
* Fix broken test
* Add and use speed constants
* Add and use meter based volume and area constants
* Add and use more mass unit constants
* Add and use concentration unit constants
* Add and use watts per square meter constant
* Use more time constants
* Use more data constants
* Add tests for legacy Script helper behavior
* Add Script helper if_running and run_mode options
- if_running controls what happens if Script run while previous run
has not completed. Can be:
- error: Raise an exception
- ignore: Return without doing anything (previous run continues as-is)
- parallel: Start run in new task
- restart: Stop previous run before starting new run
- run_mode controls when call to async_run will return. Can be:
- background: Returns immediately
- legacy: Implements previous behavior, which is to return when done,
or when suspended by delay or wait_template
- blocking: Returns when run has completed
- If neither is specified, default is run_mode=legacy (and if_running
is not used.) Otherwise, defaults are if_running=parallel and
run_mode=background. If run_mode is set to legacy then if_running must
be None.
- Caller may supply a logger which will be used throughout instead of
default module logger.
- Move Script running state into new helper classes, comprised of an
abstract base class and two concrete clases, one for legacy behavior
and one for new behavior.
- Remove some non-async methods, as well as call_from_config which has
only been used in tests.
- Adjust tests accordingly.
* Change per review
- Change run_mode default from background to blocking.
- Make sure change listener is called, even when there's an unexpected
exception.
- Make _ScriptRun.async_stop more graceful by using an asyncio.Event for
signaling instead of simply cancelling Task.
- Subclass _ScriptRun for background & blocking behavior.
Also:
- Fix timeouts in _ScriptRun by converting timedeltas to float seconds.
- General cleanup.
* Change per review 2
- Don't propagate exceptions if call from user has already returned
(i.e., for background runs or legacy runs that have suspended.)
- Allow user to specify if exceptions should be logged. They will still
be logged regardless if exception is not propagated.
- Rename _start_script_delay and _start_wait_template_delay for
clarity.
- Remove return value from Script.async_run.
- Fix missing await.
- Change call to self.is_running in Script.async_run to direct test of
self._runs.
* Change per review 3 and add tests
- Remove Script.set_logger().
- Enhance existing tests to check all run modes.
- Add tests for new features.
- Fix a few minor bugs found by tests.
* Use f-strings in integrations starting with B
* Use f-strings in integrations starting with C
* Use f-strings in integrations starting with D
* Use f-strings in integrations starting with E
* Fix pylint errors
* Fix pylint errors v2
* Fix tests
* Fix tests v2
* Add support for Supla gate with sensor
* Fix Supla switch module description and state access
* Add docs to methods of Supla gate
* Add missing comma
* Remove unused import
* Sort imports of Supla cover
* Add returning availability for every Supla device
* Use direct access to dict
* Remove deprecated property "hidden"
* Remove unused constant
* Revert using get function on dict
* hookid : isort fix
* New platform: Ezviz
* updated CODEOWNERS for ezviz
* proper test requirements
* resolved conflict
* regenerated requirements
* removed stale comments, only one call to add_entities, removed unnecessary attributes
* setup is sync, not async. Removed stale comments
* Compatible with pyezviz 0.1.4
* pyezviz 0.1.4 is now requiredf
* Added PTZ + switch management
* added services.yaml
* proper requirement
* PTZ working in async mode
* Now updates the entity
* Compatible with pyezviz 0.1.5.1
* Fixed switch ir service registering
* now requires pyezviz 0.1.5.2
* now requires pyezviz 0.1.5.2
* Revert "regenerated requirements"
This reverts commit 848b317cf9.
* Rollbacked to a simpler version
* snake_case names everywhere, logging sanatizing, voluptuous proper check
* pyezviz 0.1.5, reworked the PR so that it's intelligible
* no need for services.yaml for now
* proper voluptuous validation
* Removed stale code, use proper conf variable, describe attributes
* regenerated requirements
* stale
* removed status from attributes, since we use it for available we don't need it here then.
* Fixed log message
* Deduplicate code in the august integration
* Add additional tests for august (more coming)
* Door state is now updated when a lock or unlock call returns
as the state is contained in the response which avoids
the confusing out of sync state
* revert
* document known issue with doorsense and lock getting out of sync (pre-existing)
* Address review comments
* Additional review comments
* Use f-strings in integrations starting with A
* Use f-strings in tests for integrations starting with A
* Fix pylint by renaming variable
* Fix nested for loop in f-string for aprs device_tracker
* Break long lines into multiple short lines
* Break long lines into multiple short lines v2
* Add and use time related constants
* Sort time constants and reuse them in data rate constants
* Fix greeneyemonitor import
* Fix greeneyemonitor import V2
* Fix failing here_travel_time test
* Add TIME_MONTHS and TIME_YEARS
* Use TIME_MINUTES in opentherm_gw and isy994
* Add and use TIME_MILLISECONDS
* Change inconsistent ones
* Add TIME_MICROSECONDS and TIME_WEEKS
* Use constants in apcupsd and travisci
* Fix import error in upnp sensor.py
* Fix isy994 sensor.py using TIME_YEARS
* Fix dyson tests
* Use TIME_SECONDS in more places
* Use TIME_DAYS in google wifi
* add unique_id to directv entities.
* add addiitional debug and fix tests.
* fix lint error.
* rework unique_id and flow a bit.
* review adjustments.
* review adjustments
* review adjustments
* review adjustments.
* review adjustments
* review adjustments
* review adjustments
* review adjustments
* lint
* use serial number for host unit and mac address for client units
* fix elsif
* update test with realistic client id
* lint
* Fixed volume control for Frontier Silicon media players.
* Removed unnecessary else which caused pylint test to fail.
* Removed whitespace on empty line.
* Tweaks from on springstan's suggestions and other fixes
* Apply suggestions from code review
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Comment to explain why 1 is subtracted from volume_Steps
Also reformatted using black after code review changes.
* Split up the set volume functions into steps rather than all in-line as suggested.
* Renamed _volume_steps to _max_volume.
* Prevent asnyc_update from failing if we can't get the volume steps
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Added the option to specify the name of the device in confirguration.yaml
* Adding missing default name parameter in auto-discovery FSAPIDevice constructor.
* Fixed Black formatting.
* Removed DEFAULT_NAME constant.
* Apply suggestions from code review
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
The player would report itself as ‘off’ when in certain modes (e.g ‘Music player’ or ‘Spotify’) which meant HA would lose all control (it can’t change input or set volume etc. as it thinks it’s off). Now reports STATE_IDLE in these cases and only STATE_OFF if it is actually off.
This fixes issue #20728.
* fixes per Martin Hjelmare
* pylint fix
* final fixes per request
* fixed unit tests for new config flow
* Added unit-tests to increase coverage. at 97% now
* Added unit tests for 100% coverage of component
* removed configured_host function and updated config_flow unit tests
* added a pylint directive since it tells me by mistake DOMAIN is not used
* fixed path (removed __init__)
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fixed the test as we moved from schedule_update_... to async_schedule
* Update homeassistant/components/dynalite/bridge.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed context from config_flow
changed test_init to use the core methods
* moved test_light to also use the core interfaces
* moved to config_entries.async_unload
* additional fixes for the tests
* pylint fix and removed unnecessary code
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* added break in loop
* removed last mock_coro reference
pylint fix
* added coverage for try_connect
* added check for a successful connection before bridge.async_setup succeeds
also added a "nowait" config option (default False) that avoids this check
* changed log level
* fixed accidental chmod I did
* fixed accidental change
* not storing config in bridge
* not patching asyncio
* moved CONFIG_SCHEMA into component
* moved all logs to start capitalized (and revised some of them)
* moved test_config_flow to not patch the DynaliteBridge
* also took DynaliteBridge patching out of test_init
* removed NO_WAIT
* fixes to SCHEMA
* changed _ in multi-word CONF
moved imports to component const.py
* removed tries
* removed redundant tests
* fixed some small change i broke in the library. only version update
* fixed rewuirements
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed HIDDEN_ENTITY
removed hass in test fixture
* black fixes
* removed final piece of hidden_entity from light
fix in the library
updated config flow so if the entry is already set but with a different config, calls async_update_entry
* removed DATA_CONFIGS - no longer necessary
* pylint fixes
* added coverage
* use abort in config_flow
* test update
* removed logs
* test that update actually updates the entry
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add ZHA core typing helper.
* Add aux_channels to ZHA rule matching.
* Add match rule claim_channels() method.
* Expose underlying zigpy device.
* Not sure we need this one.
* Move "base" channels.
* Framework for channel discovery.
* Make DEVICE_CLASS and REMOTE_DEVICE_TYPE default dicts.
* Remove attribute reporting configuration registry.
* Refactor channels.
- Refactor zha events
- Use compound IDs and unique_ids
- Refactor signal dispatching on attribute updates
* Use unique id compatible with entities unique ids.
* Refactor ZHA Entity registry.
Let match rule to check for the match.
* Refactor discovery to use new channels.
* Cleanup ZDO channel.
Remove unused zha store call.
* Handle channel configuration and initialization.
* Refactor ZHA Device to use new channels.
* Refactor ZHA Gateway to use new discovery framework.
Use hass.data for entity info intermediate store.
* Don't keep entities in hass.data.
* ZHA gateway new discovery framework.
* Refactor ZHA platform loading.
* Don't update ZHA entities, when restoring from zigpy.
* ZHA entity discover tests.
* Add AnalogInput sensor.
* Remove 0xFC02 based entity from Keen smart vents.
* Clean up IAS channels.
* Refactor entity restoration.
* Fix lumi.router entities name.
* Rename EndpointsChannel to ChannelPool.
* Make Channels.pools a list.
* Fix cover test.
* Fix FakeDevice class.
* Fix device actions.
* Fix channels typing.
* Revert update_before_add=False
* Refactor channel class matching.
* Use a helper function for adding entities.
* Make Pylint happy.
* Rebase cleanup.
* Update coverage for ZHA device type overrides.
* Use cluster_id for single output cluster registry.
* Remove ZHA typing from coverage.
* Fix tests.
* Address comments.
* Address comments.
* fixes per Martin Hjelmare
* pylint fix
* final fixes per request
* fixed unit tests for new config flow
* Added unit-tests to increase coverage. at 97% now
* Added unit tests for 100% coverage of component
* removed configured_host function and updated config_flow unit tests
* added a pylint directive since it tells me by mistake DOMAIN is not used
* fixed path (removed __init__)
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fixed the test as we moved from schedule_update_... to async_schedule
* Update homeassistant/components/dynalite/bridge.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed context from config_flow
changed test_init to use the core methods
* moved test_light to also use the core interfaces
* moved to config_entries.async_unload
* additional fixes for the tests
* pylint fix and removed unnecessary code
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* added break in loop
* removed last mock_coro reference
pylint fix
* added coverage for try_connect
* added check for a successful connection before bridge.async_setup succeeds
also added a "nowait" config option (default False) that avoids this check
* changed log level
* fixed accidental chmod I did
* fixed accidental change
* not storing config in bridge
* not patching asyncio
* moved CONFIG_SCHEMA into component
* moved all logs to start capitalized (and revised some of them)
* moved test_config_flow to not patch the DynaliteBridge
* also took DynaliteBridge patching out of test_init
* removed NO_WAIT
* fixes to SCHEMA
* changed _ in multi-word CONF
moved imports to component const.py
* removed tries
* removed redundant tests
* fixed some small change i broke in the library. only version update
* fixed rewuirements
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed HIDDEN_ENTITY
removed hass in test fixture
* black fixes
* removed final piece of hidden_entity from light
fix in the library
updated config flow so if the entry is already set but with a different config, calls async_update_entry
* removed DATA_CONFIGS - no longer necessary
* pylint fixes
* added coverage
* use abort in config_flow
* test update
* removed logs
* test that update actually updates the entry
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Significantly reduce code in august integration
* Activity updates can now be processed by py-august
this allows us to eliminate the activity sync
code for the door sensors and locks
* Lock and door state can now be consumed from
the lock detail api which allows us to
remove the status call apis and reduce
the number of API calls to august
* Refactor the testing method for locks (part #1)
* Update homeassistant/components/august/binary_sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Switch to asynctest instead of unittest for mock.patch
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update pil.py
* Update doods and tensorflow to use convert_to_pil_image
* Update pil.py
* Add log messages on bad data
* Drop convert_to_pil_image
Just perform conversion in the integrations without seperate convert_to_pil_image()
* Add support for MQTT device triggers
* Fix test, tweaks
* Improve test coverage
* Address review comments, improve tests
* Tidy up exception handling
* Fix abbreviations
* Rewrite to handle update of attached triggers
* Update abbreviation test
* Refactor according to review comments
* Refactor according to review comments
* Improve trigger removal
* Further refactoring
* Audit state handling of august bridges and sensors
This addresses issue #29980
* Prevent setting up august locks that do not have a bridge as they will never work
* Prevent locks showing available when their bridge is offline
* Prevent door sensors from showing available when their bridge is offline
* Prevent creating door sensors for locks that do not have them
* Prevent doorbells showing unavailable when they are in standby mode
* Set SCAN_INTERVAL for binary_sensors to 5 seconds as
data comes in from the activity endpoint more frequently
* Update homeassistant/components/august/__init__.py
raise if the detail is missing when checking doorsense
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Handle another place where the lock detail could not exist
* Address review comments
* Handle lock detail update failing and add test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add oauth functionality and additional attributes
* Add tests WIP
* Make mocks work the correct way
* Use CONF_TOKEN constant for config
* Remove twitch from .coveragerc
* Update homeassistant/components/twitch/sensor.py
Lets be consistent
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Computes the features of a hue group as the union of the features of the bulbs in the group
* Moved create item to a function
* Added test for hue group features
* add timestamp to media_image_url to update image correctly
* applying isort on source
* apply black formatting on source
* using f strings in media_image_url property
* remove unnecessary casting
* Updated MCP23017 component to use latest adafruit-blinka v-3.9.0 and Adafruit_CircuitPython_MCP230xx v-2.2.2
* Added updated dependencies to requirements_all.txt
* Adjust tests after speed up to restore coverage for HomematicIP Cloud
* Fix test data
* Fixes after review
* remove duplicate cade
* remove service marker
* fix detecting capsman support
* fix isort
* moved support_capsman to update_devices()
* moved support-checks to setup method
* moved setup method to get_hub_details
* implement suggestion for device lists
* fix black formatting
* remove not needed variable wireless_devices
* fix usage of force_dhcp to seperate wireless devs
* fix black fmt
* Support XML conversion for RESTful sensors
Many devices continue to use XML for RESTful
APIs. Interfacing with these APIs requires custom
integrations or command line fork()/exec() overhead
which many of these devices can work with as if
they were JSON using xmltojson via this spec:
https://www.xml.com/pub/a/2006/05/31/converting-between-xml-and-json.html
This change implements converting XML output to
JSON via xmltojson so it can work with the existing
rest sensor component. As the attributes that
usually need to be scraped are deeper in the document
support for passing in a template to find the
JSON attributes that have been added. JSON APIs that
do not have their attributes at the top level
can also benefit from this change.
* Auto convert xml, change out the template for jsonpath
* Address review items and potentially unexpected normalize behavior with jsonpath
* Revert "Address review items and potentially unexpected normalize behavior with jsonpath"
This reverts commit fe9e179092.
* json_dict[0] turned out to be needed
* Fix CalDAV parsing of recurring events
Some CaDAV servers (see: SOGo) return the original event that contains
the recurrence rules. The CalDAV calendar component sorts and filters
events based on their start and end dates, and was failing to properly
show recurring events based on these recurrence rules.
This this change checks if an event has recurrence rules and changes the
start/end dates of the event to today if the event is set to occur
today. This allows the rest of the component logic to function properly.
* Use date from nextmost occurence
* Adding unit tests
* Add endless event unit test
* Create new vevent for each event recurrence today
* Remove redundant unit test
* Add timezone to events that have none
Python cannot compare them otherwise.
* Simplify code, add comments & guard clause
* Add test for recurring all day event
* Account for all-day events
* Remove redundant code
* Remove redundant code
* Remove unnecessary deepcopy
* Add hourly recurring tests
* Add tests for hourly repeating event
* Fix unit test
* Use event.copy()
* Add support for displaying Daf Yomi
* Ran black --fast
* Added docstring to get_daf
* Further lint fixes
* Remove unnecessary else
* clarify code
* Use fstrings
* pull daf yomi from hdate
* Update manifest version for daf_yomi support
* fix variable usage
* Update requirements
* Also pass in today's date as well
* Rename date variable to daytime_date
* Add tests for daf yomi sensor
* Update stale test IDs
* Add Tado water_heater
* Don't use climate CONSTS
* Fix logging text
* Add changes for multiple bridge support
* Address remarks
* should_poll must be False
* Remove additional async_schedule_update_ha_state()
* Not for climate
* Remove services file, incorrect info
* Guard currently playing for being a NoneType
* Revert "Guard currently playing for being a NoneType"
This reverts commit f5f56b0db0.
* Guard currently playing item is None
* Process review suggestions
* Remove services file, incorrect info
* Guard currently playing for being a NoneType
* Revert "Guard currently playing for being a NoneType"
This reverts commit f5f56b0db0.
* Guard currently playing item is None
* Process review suggestions
An AtaDevice has a boolean flag describing whether it supports energy
consumption metering. The flag was ignored resulting in sensor entities
reporting constant 0 kWh consumption.
* Update pymelcloud dependency to support the has_energy_consumed_meter
flag.
* Add ATTR_ENABLED_FN to sensor definitions for filtering out
unsupported sensors.
* Fix typing issue in sensor constructor.
* Remove unused UnitSystem constructor parameter.
* update ipma component for pyipma 2.0
* fix wind speed; refactor forecast
* update requirements*.txt
* fix tests; update CODEOWNERS; update pyipma to 2.0.1
* minor changes as suggested in PR
* make lint happy
* fix mocking coroutines
* restore old unique id
* fix station lat/lon; update pyipma version
* add hourly forecast option to IPMA
* add forecast tests
* use for instead of lambda
* Added some measurement points for Family 26.
Added three attriubtes for each sensor, DEVICE_FILE, RAW_VALUE and SENSOR_TYPE
Added some comments.
Updated to get config values for owserver to get owport and owhost.
* Changed to _LOGGER.debug in some places
Resorted includes
* Fixup of code to reflect review comment, comply to Black and pass tests
* Added unique_id Entity property with device file id and added device_file as attribute that takes its data from Entities unique_id-.
* Missing blank line identified by fake8 and black
* Changed to let device_state_attributes return attribute device_file from the self._device_file member variable of the entity.
* Changed from info to debug logging
* Add support for real-time data from SimpliSafe
* Updated requirements
* Linting
* Ensure dispatcher topic contains the domain
* Don't bother with a partial
* Websovket dataclass and other code review
* Ensure initial_event_to_use works with error
* Don't inline methods
* Don't abuse loop variable
* Simplify initial event retrieval
* Add connection lost and restored events
* Revert "Add connection lost and restored events"
This reverts commit e7ffe05938.
* Make _on_disconnect a static method
* Code review comments
* Allow entities to opt out of REST and/or websocket API updates
* Revert "Allow entities to opt out of REST and/or websocket API updates"
This reverts commit 1989f2e00e.
* Code review comments
* Fix issues with events not triggering correct entities
* Bug fixes
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Updated to the newest ihcsdk 2.5.0
* Formatted changes to make it pass CI tests
* Update to version 2.6 of ihcsdk
* Initial implementation of Vilfo router integration.
This commit is a combination of several commits, with commit messages in bullet form below.
* Added additional files to Vilfo integration.
* Added generated files.
* Fixed alphabetic order in generated config_flows.
* Continued implementation of config flow for Vilfo integration.
* Continued work on config_flow for Vilfo.
* Updated requirements in manifest for Vilfo Router integration.
* Some strings added to Vilfo Router integration.
* Vilfo Router integration updated with sensor support.
* Code style cleanup.
* Additional cleanup of config flow.
* Added additional UI strings for Vilfo Router
* Updated tests of config flow and fixed formatting
* Updated requirement upon vilfo-api-client.
* Sensor refactoring including support for icons
* Code style changes for Vilfo Router integration
* Code cleanup
* Fixed linting issues in Vilfo Router integration
* Fixed import order in test for Vilfo integration.
* Updates to Vilfo Router integration based on feedback
Based on the feedback received, updates have been made to the Vilfo Router integration.
A couple of the points mentioned have not been addressed yet, since the appropriate action has not yet been determined. These are:
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371124477
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371202896
This commit consists of:
* Removed unused folder/submodule
* Fixes to __init__
* Fixes to config_flow
* Fixes to const
* Refactored sensors and applied fixes
* Fix issue with wrong exception type in config flow
* Updated tests for Vilfo integration config_flow
* Updated dependency upon vilfo-api-client to improve testability
* Import order fixes in test
* Use constants instead of strings in tests
* Updated the VilfoRouterData class to only use the hostname as unique_id when it is the default one (admin.vilfo.com).
* Refactored based on feedback during review.
* Changes to constant names,
* Blocking IO separated to executor job,
* Data for uptime sensor changed from being computed to being a timestamp,
* Started refactoring uptime sensor in terms of naming and unit.
* Updated constants for boot time (previously uptime) sensor.
* Refactored test of Vilfo config flow to avoid patching code under test.
* UI naming fixes and better exception handling.
* Removed unused exception class.
* Various changes to Vilfo Router integration.
* Removed unit of measurement for boot time sensor,
* Added support for a sensor not having a unit,
* Updated the config_flow to handle when the integration is already configured,
* Updated tests to avoid mocking the code under test and also to cover the aforementioned changes.
* Exception handling in Vilfo Router config flow refactored to be more readable.
* Refactored constant usage, fixed sensor availability and fix API client library doing I/O in async context.
* Updated signature with hass first
* Update call to constructor with changed order of arguments
* Refresh the august access token
when needed.
Currently august will stop working when the token
expires about every six month.
This resolves issue #23788
* Make refresh_access_token_if_needed private since we do not want additional callers
* Add init
* Suppress data get timeout exceptions for 30s after notify attempts
At least SMS send failures may put the API in a state where it times out
some (but not all) data get operations for some time, e.g. 25s.
Closes https://github.com/home-assistant/home-assistant/issues/30827
* Do not pile up duplicate data requests
Do not add another request for a piece of data for which a previous
request is still in progress. For example failing SMS sends are known to
stall some (but not all) requests for some time, and firing up more is
not going to help.
As polling for lock status is every 15 minutes,
we read lock and unlock events from the activity log.
An upstream update of py-august was needed to
expose the door open and close events.
Door open and close events are now seen within
a few seconds instead of delayed 15+ minutes.
* fix unique_id computation for switches
* update konnected component to use async, config entries, registries. Pro board support and tests
* clean up formatting comments from PR
* use standard interfaces in tests
* migrate config flow to use options
* address latest pr feedback
* format for import as part of config schema validation
* address pr feedback
* lint fix
* simplify check based on pr feedback
* clarify default schema validation
* fix other schema checks
* fix translations
Co-authored-by: Nate Clark <nate@nateclark.com>
* Significantly reduce the number of API calls that the august integration
makes.
The poll interval for the lock status API is now 15 minutes
instead of every 10 seconds because we can use the activity
API to see changes in lock state. The interval for the
activity API is 10 seconds which allows for the same
frequency of state monitoring without all the additional API calls.
With four locks, this change results in an ~80% reduction in the number
of API calls.
The result of the lock and unlock APIs now update the lock state instead
of waiting for the next poll. This change also has the added benefit of
making the UI appear far more responsive.
* Convert to using UTC times
* Added support of multiple Tado accounts
Changed geberation of sensor unique id (breaking change)
* Fixed lints
* Fixed error detecting opened window
* Changed gereration of unique id of climate
* Removed commented code and added comments
* Initial commit
* ran hassfest and gen_requirements_all scripts
* fixes per request from Paulus Schoutsen
* ran gen_requirements_all
* updated library version - removed some debug leftover
* get_requirements again...
* added documentation URL
* ran isort
* changed storage in hass.data[DOMAIN] to use entry_id instead of host
* adopted unit tests to latest fix
* Update const.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add MELCloud integration
* Provides a climate and sensor platforms. Multiple platforms on one go
is not the best option, but it does not make sense to remove them and
commit them later either.
* Email and access token are stored to the ConfigEntry. The token can be
updated by adding the integration again with the same email address. The
config flow is aborted and the update is performed on the background.
* Run isort
* Fix pylint errors
* Run black
* Increase coverage
* Update pymelcloud dependency
* Add HVAC_MODE_OFF emulation
* Remove print
* Update pymelcloud to enable device type filtering
* Collapse except blocks and chain ClientNotReadys
* Add preliminary documentation URL
* Use list comp for creating model info
Filters out empty model names form units.
* f-string galore
Dropped 'HVAC' from AtaDevice name template.
* Delegate fan mode mapping to pymelcloud
* Fix type annotation
* Access AtaDevice through self._device
* Prefer list comprehension
* Update pymelcloud to leverage device type grouping
The updated backend lib returns devices in a dict grouped by the device
type. The devices do not necessarily need to be in a single list and
this way isinstance is not required to extract devices by type.
* Remove DOMAIN presence check
This does not seem to make much sense after all.
* Fix async_setup_entry
Entry setup used half-baked naming from few experimentations back.
The naming conventiens were unified to match the platforms.
A redundant noneness check was also removed after evaluating the
possible return values from the backend lib.
* Simplify empty model name check
* Improve config validation
* Use config_validation strings.
* Add CONF_EMAIL to config schema. The value is not strictly required
when configuring through configuration.yaml, but having it there makes
things more consistent.
* Use dict[key] to access required properties.
* Add DOMAIN in config check back to async_setup. This is required if an
integration is configured throught config_flow.
* Remove unused manifest properties
* Remove redundant ClimateDevice property override
* Add __init__.py to coverage exclusion
* Use CONF_USERNAME instead of CONF_EMAIL
* Use asyncio.gather instead of asyncio.wait
* Misc fixes
* any -> Any
* Better names for dict iterations
* Proper dict access with mandatory/known keys
* Remove unused 'name' argument
* Remove unnecessary platform info from unique_ids
* Remove redundant methods from climate platform
* Remove redundant default value from dict get
* Update ConfigFlow sub-classing
* Define sensors in a dict instead of a list
* Use _abort_if_unique_id_configured to update token
* Fix them tests
* Remove current state guards
* Fix that gather call
* Implement sensor definitions without str manipulation
* Use relative intra-package imports
* Update homeassistant/components/melcloud/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix ViCare water_heater set_temperature
This fixes a obvious but undiscovered bug in the water heater component:
Instead of the commanded value the prvious value was set on the API
* Bump PyVicare to 0.1.7
* add typing
* 100% battery_level is enough
* human-friendly datetime
* better enum usage
* add online and learning mode attrs
* use max two decimals in attrs
* use legacy style debug logging
* remove str usage of enums
* add feeder
* add feeder and adapt to new surepy version
* use ProductID instead of ThingID
* various changes and improvements
* add connectivity sensors for all devices & proper support for multiple hubs
* remove "side effects"/exception catching in attribs
* correct unique ids, reorder classes
* move Flap class from binary_sensor to sensor and add a sensore base class
* comments cleanup, minor typing and logging fixes
* remove commented code
* remove commented code
* add typing
* 100% battery_level is enough
* human-friendly datetime
* better enum usage
* add online and learning mode attrs
* use max two decimals in attrs
* use legacy style debug logging
* remove str usage of enums
* add feeder
* add feeder and adapt to new surepy version
* use ProductID instead of ThingID
* various changes and improvements
* add connectivity sensors for all devices & proper support for multiple hubs
* remove "side effects"/exception catching in attribs
* correct unique ids, reorder classes
* move Flap class from binary_sensor to sensor and add a sensore base class
* comments cleanup, minor typing and logging fixes
* remove commented code
* remove commented code
* fix spelling in comment to make the CI happy (seriously?!)
* fix manifest file
* fix requirements_all.txt file
* add missing docstrings
* fix available property
* remove typing from self
* remove commented code
* remove is_on property from sensor
* jump to new surepy version
* remove useles init methods
* added recorder vars db_max_retries and db_retry_wait
* fixed test_recorder_setup_failure
I failed because it was missing the two new variables. I simply added these with default values.
* fixed syntax error in test_recorder_setup_failure
* fixed formatting error in test_init_py for recorder component
* fixed typo in test case
* Updated the way the default keys for db_,max_wait and db_retry_wait is set
Implemented based on suggestions from @springstan
* Updated config_schema call to adhere to Black
* changed conf.get to conf[dict] for var retrieval
* removed 2 blank lines
* Add unique ID and device info data
* Don't get power info on switch models lacking it
* Move info fetching to update, update before adding
* Upgrade pyedimax to get device info
* Remove device info
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Only auth on enter_learning in response to errors.
* Remove extra newline.
* Add missing break on successful attempt.
* Avoid logging success message when auth is unsuccessful.
* Add Minecraft Server integration
* Add unit test for config flow
* Fixed some review findings and increased unit test coverage
* Fixed docstrings of new test cases
* Removed unnecessary debug log messages
* Added unique IDs and device infos and removed duplicate name validation
* Attempt to fix unit test on CI
* Return state OFF instead of UNAVAILABLE in case connection to server drops
* Added property decorator to server properties, even less debug messages, improved sensor dispatcher connection and other review findings fixed
* Moved special property handling to sensors, fixed name confusion in sensor entity, switch to HA const for scan_interval, simplified building players list string
* Improved periodic update, speeded up unit tests
* Added type hints, added callback decorator to entity update callback, added const.py to unit test exclusions
* Changed state sensor to binary sensor, removed empty unit test file, added constants for icons and units
* Let HA handle unknown state, check for None in description and players list sensor
* Removed periods at end of log messages, removed constant for default host
* Updated requirements_test_pre_commit.txt, fixed codespell findings
* Use localhost as default host
* Removed passing hass to entities, moved log message from init, moved host lower to vol, use proper patch library, patch library instead of own code
* Replaced server properties with global instance attributes, removed config option scan_interval, switch back to async_track_time_interval
* Removed description and players list sensors, added players list as state attributes to online players sensor, raise OSError instead of deprecated IOError, other minor review findings fixed
* Use MAC address for unique_id in case of an IP address as host, added getmac to manifest.json, added invalid_ip to strings.json, added new test cases for changes in config_flow, replace all IOError's with OSError, other review findings fixed
* Removed double assignment
* Call get_mac_address async safe
* Handle unavailable and unknown states to reach silver quality scale, added quality scale to manifest.json
- Bump amcrest package to 1.5.6. Includes networking improvements, no longer
communicates during Http.__init__(), and allows running snapshot command
without using stream mode.
- Handle login errors better, and not just at startup.
- Increase network connect & read timeout to 6.05 seconds.
- Increase network read timeout to 20 seconds for snapshot command.
- Run snapshot command in separate task, that cannot be cancelled, to eliminate
possibility of two snapshot commands running simultaneously (since
AmcrestCam.async_camera_image can be cancelled.) Also makes sure any exceptions
from the command are caught properly.
* Updated the provider name to blockchain.com
Blockchain.info moved from .info .com. Updated the name of the service to blockchain.com
* Updated the provider name to blockchain.com
Updated the provider name to blockchain.com
* initial version of gdacs integration
* updated translations
* generated files
* added abbreviation
* bumped library version
* small feed entry attribute fixes
* add unit tests
* need to use original mdi name
* bumped library version
* improved entity name for earthquakes
* round vulnerability number
* typo
* support for categories
* testing support for categories
* tie longitude and latitude together
* validating categories
* simplifying setup
* passing domain as parameter
* simplified test setup
* moved test code
* simplified test code
* removed superfluous code
* changed approach to unique identifier
* changed code structure
* simplified unit system handling
* made schema a constant
* comment added
* simplifying code
* added message if location already configured
* removed unnecessary code
* simplified test code
* avoid mocking __init__
* pylint
* simplified code
* fetch categories from integration library
* setting PARALLEL_UPDATES
* setting PARALLEL_UPDATES to zero/unlimited
* added quality scale
* Add support for belgian meter and rename some sensors
* DSMR Fixes
* Add test
* More tests
* Adjust test to latest dev
* Remove unused code
* Depend on dsmr_parser 0.18
* Update vizio host check to handle entries that don't have port
* add comment explaining no_port test for future
* remove _name_is_same function and support user updating name in config
* Update strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use entity.async_request_call in service helper
* Clean up semaphore handling
* Address comments
* Simplify call entity service helper
* Fix stupid rflink test
* Update vizio host check to handle entries that don't have port
* add comment explaining no_port test for future
* remove _name_is_same function and support user updating name in config
* Update strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* keep track of the derivative for unit_time
In this way, you will get a better estimate of the derivate during
the timescale that is relavant to the sensor.
This solved a problem where sensors have a low output resolution.
For example a temperature sensor that can only be integer numbers.
It might report many values that are the same and then suddenly go up one value.
Only in that moment (with the current implementation) the derivative will be finite.
With my proposed implementation, this problem will not occur, because it takes the average
derivative of the last `unit_time`.
* only loop as much as needed
* treat the special case of 1 entry
* add option time_window
* use cv.time_period
* fix comment
* set time_window=0 by default
* rephrase comment
* use timedelta for time_window
* fix the "G" unit_prefix and add more prefixes
https://en.wikipedia.org/wiki/Unit_prefix
* add debugging lines
* simplify logic
* fix bug where the there was a division of unit_time instead of multiplication
* simplify tests
* add test_data_moving_average_for_discrete_sensor
* fix test_dataSet6
* improve readability of the tests
* better explain the test
* remove debugging log lines
* keep track of the derivative for unit_time
In this way, you will get a better estimate of the derivate during
the timescale that is relavant to the sensor.
This solved a problem where sensors have a low output resolution.
For example a temperature sensor that can only be integer numbers.
It might report many values that are the same and then suddenly go up one value.
Only in that moment (with the current implementation) the derivative will be finite.
With my proposed implementation, this problem will not occur, because it takes the average
derivative of the last `unit_time`.
* only loop as much as needed
* treat the special case of 1 entry
* add option time_window
* use cv.time_period
* fix comment
* set time_window=0 by default
* rephrase comment
* use timedelta for time_window
* fix the "G" unit_prefix and add more prefixes
https://en.wikipedia.org/wiki/Unit_prefix
* add debugging lines
* simplify logic
* fix bug where the there was a division of unit_time instead of multiplication
* simplify tests
* add test_data_moving_average_for_discrete_sensor
* fix test_dataSet6
* improve readability of the tests
* better explain the test
* remove debugging log lines
* Yield only one Speaker interface.
* Yield PowerController only is supported.
* Revert "Yield PowerController only is supported."
This reverts commit c0dbf7e4
* Add Alexa.Speaker interface properties.
* Refactor tests for Alexa.Speaker and Alexa.StepSpeaker.
* Code Smell Change.
* Fix R1705: Unnecessary "elif" after "return".
* bump pyvizio version and add additional device info
* add patches for get_model and get_version
* change keywrod argument to positional for _test_service
* Fix auto_bypass in alarmdecoder
* Address review comments: used dict[key] and renamed variable
* Use dict[key] for required or optional config keys with default values
* Add salt component
* Update files from development checklist
* Use warning log level when data cannot be retrieved
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Remove empty fields from manifest.json
* Remove default arguments for host and username
* Bump saltbox library version
* Refactor and improve error handling
* Dev checklist
* Fix linting errors
* Check for None and return empty list
* Log on debug level instead of info
* More compact None checks
* Remove redundant None check
* Return None on exception but store as empty list
* More compact syntax
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* added support for multiple attachments to signal_messenger integration
* updated pysignalclirestapi version in requirements_all.txt
* reworked multiple attachments feature in signal_messenger integration
* stay backwards compatible by both allowing the "attachment" and
the "attachments" attribute.
* reworked multiple attachments feature in signal_messenger integration
* stay backwards compatible by both allowing the "attachment" and
the "attachments" attribute.
* small change in signal_messenger integration
* added deprecation warning for 'attachment' attribute
* small changes in signal_messenger integration
* use 'warning' instead of 'warn' when logging the warning message
* re-generated requirements_test_pre_commit.txt
* added tests for signal_messenger integration
* regenerated requirements_test_all.txt for signal_messenger integration
* added more signal_messenger tests
* remove signal_messenger integration files from .coveragerc
BraviaRC is currently unmaintained for home-assistant. This commit
swaps it out with a new fork of BraviaRC called python-bravia-tv.
This captures all bug fixes from BraviaRC release 3.7 (previously
linked backend) to right before BraviaRC breaks when used by home-assistant.
The intent of forking is to be able to continue supporting home-assistant.
This is not intended to be a one off solution; this new fork will have
future updates and be maintain as needed.
This initial commit of python-bravia-tv improves the import process,
however overall preserves the original API.
Other fixes include:
* Fix set-volume slider
* Better error handling
* Increase input options
Resolves: #26351, #30964
See also: #12577, #14843, #17345, #18245
* KEF: add support for play, pause, next track, and previous track
* bump aiokef to 0.2.7
* run isort
* do not dynamically change the supported features
* Added lock support for tahoma
* Fixed logging to conform with pylint W1201 and E1205.
* Implemented @springstan suggestions.
* Fixed a typo...
* Implemented @springstan suggestions (v2).
* Implemented @springstan suggestions (v3).
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Fix auto_bypass in alarmdecoder
* Address review comments: used dict[key] and renamed variable
* Use dict[key] for required or optional config keys with default values
* Refactor Hue Lights to use DataCoordinator
* Redo how Hue updates data
* Address comments
* Inherit from Entity and remove pylint disable
* Add tests for debounce
* Refactor Hue Lights to use DataCoordinator
* Redo how Hue updates data
* Address comments
* Inherit from Entity and remove pylint disable
* Add tests for debounce
* Rewrite UniFi integration to use push messaging
* Add signalling for new clients/devices
* Update list of known wireless clients when we get events of them connecting
* Reconnection logic for websocket
* Fix failing tests
* Bump requirement to v12
* Add new tests
* Update homeassistant/components/unifi/controller.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Register on HA stop event to gracefully shutdown HomematicIP Cloud connections
* fixes after review
* Fix lint
* switch to unload_entry
* Save listener
* Switch back to hap.async_reset()
* add media player test and update media player logic to qualify vizio for platinum quality score
* add SCAN_INTERVAL and log message once when device goes from available to unavailable and vice versa
* move test constants into one file to avoid defining dupes in each test file
* move constant to shrink diff
* move pytest fixtures to conftest.py
* remove commented out code
* move unload test to test_init
* updates to tests and logging based on review
* bypass notification service
* add fixture so component setup makes it through config flow
* split failure tests into two
* fix setup and entity check for test_init and setup failures in test_media_player
* make domain references consistent across test files
* remove logging steps that were introduced to help debug
* move common patches out to new fixture and use config entry everywhere appropriate
* fix docstring
* add test for update options to increase code coverage
* add one more assert
* refactor test_media_player to move boiler plate logic out of each test into _test_init function
* final refactor of test_media_player to move repeat logic into separate function
* update docstrings
* refactor setup failure tests to move shared logic into private function
* fix last new functions code to use variable instead of static config variable
* remove trailing comma
* test that volume_step gets properly passed to Vizio volume function
* fix comment language
* assert with unittest.mock.call in _test_service and use config_entries.async_setup instead of config_entries.async_add
* replace config_entries.async_add with config_entries.async_setup everywhere
* simplify if statement for argument assertion
* fix logging based on style guide
* remove accidentally committed changes
* update scan interval to something more reasonable and add tests for availability changes
* change filter function to list comprehension, simplify log messages, remove default entity id from logs since it is user configurable, fix docstrings
* Added support for the opening and closing states to MQTT covers
* Processed PR feedback on MQTT cover changes
* Add missing MQTT abbreviation to fix failing tests
* Fixed typo in MQTT abbreviations
* Added mqtt set cover position optimistic test
* add dispatching of groups to light
* added ha device registry device id
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* api cleanup
* clean up get device info
* create and remove zigpy groups
* clean up create and remove group api
* use device id
* use device id
* cleanup
* update test
* update tests to allow group events to flow
* Update tests with rangeValue and rangeValueDelta to use int.
* Add support for rangeValueDeltaDefault for covers.
* Update tests for range changes.
* Test for AdjustRangeValue with rangeValueDeltaDefault True.
* Update tilt error.
* Add OPNSense device_tracker
This commit adds a new component for using an OPNSense router as a
device tracker. It uses pyopnsense to query the api to look at the
arptable for a list of devices on the network.
* Run black formatting locally to appease azure
* Apply suggestions from code review
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Fix issues identified during code review
This commit updates several issues found in the module during code
review.
* Update homeassistant/components/opnsense/__init__.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update CODEOWNERS for recent changes
* Fix lint
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* More fixes from review comments
This commit fixes several issues from review comments, including
abandoning all the use of async code. This also completely reworks the
tests to be a bit clearer.
* Revert tests to previous format
* Add device detection to opnsense device_tracker test
This commit adds actual device detection to the unit test for the setup
test. A fake api response is added to mocks for both api clients so that
they will register devices as expected and asserts are added for that.
The pyopnsense import is moved from the module level to be runtime in
the class. This was done because it was the only way to make the
MockDependency() call work as expected.
* Rerun black
* Fix lint
* Move import back to module level
* Return false on configuration errors in setup
This commit updates the connection logic to return false if we're unable
to connect to the configured OPNsense API endpoint for any reason.
Previously we would not catch if an endpoint was incorrectly configured
until we first tried to use it. In this case it would raise an unhandled
exception. To handle this more gracefully this adds an api call early in
the setup and catches any exception raised by that so we can return
False to indicate the setup failed.
* Update tests
* Add pyopnsense to test requirements
* Rerun gen_requirements script
* Fix failing isort lint job step
Since opening the PR originally yet another lint/style checker was added
which failed the PR in CI. This commit makes the adjustments to have
this pass the additional tool's checks.
* Fix comment
* Update manifest.json
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Fix light.turn_on for emulated_hue
HarmonyHub sends `{'xy': [0, 0], 'on': True, 'bri': 0}` when turning on lights that do not support brightness control. Unfortunately current logic always uses brightness value to control on/off state which makes no sense for lights that don't support brightness at all. This change fixes that behavior, making light without brightness control usable with HarmonyHub and probably some other remotes.
* Test 'no_brightness' lights
* Update entity.py
* Fix Black
* Fix Black
* Update entity.py
* Use new style python
* Simplify
* Allow multible attribute with different channels
* Black
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Add SSLError check and remove log spam
* Update homeassistant/components/proxmoxve/manifest.json
remove unnecessary requirement
* Remove log level change
Moved to proxmoxer library
* Update homeassistant/components/proxmoxve/__init__.py
* Update manifest.json
Update to new version of dependency which fixes log issue
* Run formatter and requires updates
* oops, tabs
* Fix quote marks
When you can't get black running, just fix whatever CI says is wrong!
* Track if request is local
* Cancel early if 2FA disabled
* Allow disabling 2FA for ack
* Do not mark devices with 2FA as reachable
* Add request source to GA events
* Webostv: add sound_output capability
Add the ability to read and set the sound_output
* Webostv: add sound_output capability
* Webostv: add sound_output capability
* fix blank spaces
* fix to long line
* add ,
* Import ATTR_SOUND_OUTPUT
Do not have the ability to test this change right now
* Add white space
* Create const.py
* Use const import
* Use import from const.py
* Add docstring
* Change order
* Change order
* Fix import
* Fix import
* Fix typo
* Change order again
* Change order again
* Change order of attributes
* use hapid as unique_id for config_entry of HomematicIP Cloud
* Add qualita_scale to manifest
* Update config_flow
* use core interface for config_flow tests
* refactor to fail earlier
* use asynctest
* rewrite tests
* rewrite tests
* fix test
* add assert
* Import constants sanely
* Linting
* Rename data constants for consistency
* Refactor RainMachine switch platform
* Comments
* Cleanup
* Refactor switch and sensor API calls to be separate
* Linting
* Make sure zones are updated in appropriate service calls
* Correctly decrement
* Linting
* Don't do weird inheritance
* Ensure service calls update data properly
* Docstring
* Docstring
* Errors can be logged without string conversion
* Code review comments
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Updated to the newest ihcsdk 2.5.0
* Formatted changes to make it pass CI tests
* Make SimpliSafe integration more resilient to SimpliSafe cloud issues
* Clear emergency refresh token
* Stop listening when appropriate
* Cleanup
* Saving refresh token should happen after all updates
* Code review
* Rewrite of Spotify integration
* Update homeassistant/components/spotify/config_flow.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Remove configurator dependency
* Strip whitespace from device model in case Spotify product is missing
* Ensure domain dict exists in hass data on setup entry
* Simply config validation for client id and secret
* Abort flow on any exception from spotipy
* Add tests for config flow
* Gen requirements all
* Add test package __init__
* Remove Spotify from coveragerc
* Made alias handling more robuust
* Fix supported_features for Spotify free and open accounts
* Improve error message in the logs
* Re-implement Spotify media_player
* Change media content type when play a playlist
* Process review suggestions
* Move Spotify init, static current user and supported_features
* Remove unneeded me call
* Remove playlist content type due to frontend issues
* Improve playlist handling, when context is missing
* Handle entity disabled correctly
* Handle being offline/unavailable correctly
* Bump Spotipy to 2.7.1
* Update coverage RC, mark integration silver
* Remove URI limitation, lib supports all Spotify URI's now
* Final cleanup
* Addresses Pylint error
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update Hue existing config entry with discovery data
* Updated method documentation comments
* Update implementation to match latest dev
* Use named argument for clarity
* Buienradar Camera for Belgium
* Voluptuous check for country code
* Black formatting
* Testing for Buienradar Belgium
* Changed MULTIPLE CHOICE variable name
* Changes from frenck review
* remove connection check during setup since it is already done during config flow
* revert change and fix log message
* demote connection setup to warning
* upgrade to aiopylgtv 0.3.0 and corresponding simplification and cleanup of webostv state tracking
* properly handle case where Live TV is not reported in list of apps
* fix tests (entity state is no longer linked to source id)
* fix pylint checks
* avoid unnecessary retrieval of channel list
* use only standard home assistant states
* add missing tests
* readd removed test
* add zeroconf discovery support for vizio integration
* no mock_coro_func needed
* add reasonable timeout and don't log exceptions from pyvizio due to timeout
* add test to test options update and bump pyvizio to avoid timeout issues
* update requirements_*
* fix gaps in coverage
* change return hint for async_setup_entry
* use source variables instead of strings
* only get unique ID if about to create entry
* update based on review
* Revert "update based on review"
This reverts commit 0d612a90eb7d02c92061f902973e527267e3110a.
* f-string
* fix last review
* revert cleanup changes to simplify PR
* remove unnecessary ConfigFlow object variables to simplify logic
* revert cleanup changes to make review easier, noted for future cleanup
* revert cleanup changes to make review easier, noted for future cleanup
* move zeroconf service type constant to test module
* enhance zeroconf service info decoding to include raw bytes
* Update homeassistant/components/zeroconf/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix test based on last commit
* fix test based on last commit
* remove .keys() when asserting processed and raw service info properties
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Iteration on issue and PR templates
* Some small improvements to make it look better in the PR editor
* Better English
* Please keep template
* Consistency
* Adds www to website link, to make more clear it is our website
* Process review suggestion by Martin
* Added dep bump as type of change
* English
* support xiaomi miio sensor: cgllc.airmonitor.s1 & cgllc.airmonitor.b1
* support xiaomi miio sensor: cgllc.airmonitor.s1 & cgllc.airmonitor.b1
* rollback sensor, modify air_quality
* only set air_quality props
* remove set state from "zhimi.airmonitor.v1"
* unit_of_measurement return None when the pm25 isn't reported
* import libs by isort
* Improve sensor for automations
I've updated the sensor so that departure time and delay can be used in automatons.
Before, the departure time and delay time were only available wrapped in strings which makes it difficult to use them in automations. Using the extra attributes, one can easily use them in automations.
* Update homeassistant/components/nmbs/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Updates based on review
Changed min to minutes as requested
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* create derivation component
based on integration component
remove left and right
* Update test
(was'n saved)
* add some functionnal point test
* Change derivation to derivative
* Continue migration from derivation to derivative
* Add codeowners info
* fix tests typo and values
* Improve code from reviewer
add test case
fix test values
still a prefix issue that should not
* create derivation component
based on integration component
remove left and right
* Update test
(was'n saved)
* add some functionnal point test
* Change derivation to derivative
* Continue migration from derivation to derivative
* Add codeowners info
* fix tests typo and values
* Improve code from reviewer
add test case
fix test values
still a prefix issue that should not
* Update homeassistant/components/derivative/sensor.py
Fix test issue with unit of measurement
Co-Authored-By: Santobert <tobhaase@gmail.com>
* Fix review
Move ValueError to SyntaxError
* precise state test
* un comment original tests and remove error tests
* Fix isort issue
* Fix review
- update doc link
- migrate to general const import
* Rollback import conf_unit, just defined localy
Co-authored-by: Santobert <tobhaase@gmail.com>
* Add foundation for integration services
* Fix tests
* Remove async_get_platform
* Migrate Sonos partially to EntityPlatform.async_register_entity_service
* Tweaks
* Move other Sonos services to media player domain
* Move other Sonos services to media player domain
* Address comments
* Remove lock
* Fix typos
* Use make_entity_service_schema
* Add area extraction to async_extract_entities
Co-authored-by: Anders Melchiorsen <amelchio@nogoto.net>
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Minor enhancement to jewish_calendar:
- Expose more halachic times from the underlying hdate module
- Correct and standardize some transliterations
* Undo breking name change
* Add icon for talit time
Co-authored-by: Andrew Marks <52414333+amarks-coatue@users.noreply.github.com>
* use media player defined device classes instead of custom ones, add options flow test, add timeout options parameter
* make options update error more generic
* fix config flow options update logic
* simplify logic for options update during import
* use platform list for load and unload
* update private config flow function name and description
* fix grammar in strings.json
* update mock config variable names to be more accurate
* remove timeout conf option, create device_class property
* update requirements
* update .coveragerc to indicate that config_flow has tests
* fix source of device_class property and move constants to const.py
* fix grammar in error message
* remove redundant device check in async_setup_entry since device connection is checked during config flow
* revert change to async_setup_entry, raise ConfigEntryNotReady if device can't be connected to
* update error text
* add more context to error text
* Refactor input_datetime.
Keep the state as datetime, but format accordingly to has_time and
has_date.
* Use config dict for input_datetime.
* Add tests.
* Lint
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add config flow support, device registry support, available property
* raise PlatformNotReady if HA cant connect to device
* remove test logging statement and fix integration title
* store import and last user input values so user can see errors next to value that caused error
* add PARALLEL_UPDATES
* add missing type hints
* add missing type hints to tests
* fix options config flow title
* changes based on review
* better key name for message when cant connect
* fix missed update to key name
* fix comments
* remove logger from test which was used to debug and update test function names and docstrings to be more accurate
* add __init__.py to vizio tests module
* readded options flow and updated main component to handle options updates, set unique ID to serial, fixes based on review
* pop hass.data in media_player unload instead of in __init__ since it is set in media_player
* update requirements_all and requirements_test_all
* make unique_id key name a constant
* remove additional line breaks after docstrings
* unload entries during test_user_flow and test_import_flow tests to hopefully reduce teardown time
* try to speed up tests
* remove unnecessary code, use event bus to track options updates, move patches to pytest fixtures and fix patch scoping
* fix comment
* remove translations from commit
* suppress API error logging when checking for device availability as it can spam logs
* update requirements_all and requirements_test_all
* dont pass hass to entity since it is passed to entity anyway, remove entity unload from tests, other misc changes from review
* fix clearing listeners
* use config_entry unique ID for unique ID and use config_entry entry ID as update signal
* update config flow based on suggested changes
* update volume step on config import if it doesn't match config_entry volume step
* update config_entry data and options with new volume step value
* copy entry.data and entry.options before updating when updating config_entry
* fix test_import_entity_already_configured
* Store last working HTTP settings
* Add safe mode
* Fix tests
* Add cloud to safe mode
* Update logging text
* Fix camera tests leaving files behind
* Make emulated_hue tests not leave files behind
* Make logbook tests not leave files behind
* Make tts tests not leave files behind
* Make image_processing tests not leave files behind
* Make manual_mqtt tests not leave files behind
* Added custom validator function for speed list
* Replace CONF_SPEED_STATE_TOPIC with CONF_SPEED_COMMAND_TOPIC to determine SUPPORT_SET_SPEED
* Revert "Added custom validator function for speed list"
This reverts commit f000396fa6.
* Replace CONF_OSCILLATION_STATE_TOPIC with CONF_OSCILLATION_COMMAND_TOPIC to determine SUPPORT_OSCILLATE
* Support color light with nightlight
* Better nightlight mode support check
* Lint fixes
* Remove brightness control for color light with nightlight mode
* Updated NSAPI to version 3.0.0
* Fixed code style error
* Restructured API access
* Improved construction of attributes
* Fixed handling of API output
* Added @YarmoM as code owner
* Updated CODEOWNERS
* Reverted changes for full backwards compatibility
* Fixed bad conditional
* Simplify conditional
* Make met config flow tests more robust
* Fix test with default form values
* Remove not needed test
* Clean create entry test
* Clean double test
* Clean last tests
* Fix docstring
* ZHA cover device support
* flake8
* flake8, black
* isort
* pylint
* more test
* use zigpy provided functions
* black
* handle command errors, better state handling
* black
* more test
* lint
* Update ZHA cover tests coverage.
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Refactor to use ids in data class
* Use station_id
* Refactor Netatmo to use oauth
* Remove old code
* Clean up
* Clean up
* Clean up
* Refactor binary sensor
* Add initial light implementation
* Add discovery
* Add set schedule service back in
* Add discovery via homekit
* More work on the light
* Fix set schedule service
* Clean up
* Remove unnecessary code
* Add support for multiple entities/accounts
* Fix MANUFACTURER typo
* Remove multiline inline if statement
* Only add tags when camera type is welcome
* Remove on/off as it's currently broken
* Fix camera turn_on/off
* Fix debug message
* Refactor some camera code
* Refactor camera methods
* Remove old code
* Rename method
* Update persons regularly
* Remove unused code
* Refactor method
* Fix isort
* Add english strings
* Catch NoDevice exception
* Fix unique id and only add sensors for tags if present
* Address comments
* Remove ToDo comment
* Add set_light_auto back in
* Add debug info
* Fix multiple camera issue
* Move camera light service to camera
* Only allow camera entities
* Make test pass
* Upgrade pyatmo module to 3.2.0
* Update requirements
* Remove list comprehension
* Remove guideline violating code
* Remove stale code
* Rename devices to entities
* Remove light platform
* Remove commented code
* Exclude files from coverage
* Remove unused code
* Fix unique id
* Address comments
* Fix comments
* Exclude sensor as well
* Add another test
* Use core interfaces
* Use collections for input_number.
* Add tests.
* Typo fix.
* Make editable a public attribute.
* Move async_setup to top.
* Update homeassistant/components/input_number/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/input_number/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Cleanup.
* async_write_ha_state()
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add device_info property and move component to async
* use new VizioAsync class to have proper async support
* remove hass from VizioDevice init since it is not needed
* update requirements_all
* missed type hint
* updates based on review
* pyvizio version bump
* additional fixes based on review
* mistake in last commit
* remove device_info property because it can't be used unless this integration has config flow support
* Added preset scheduling to radiothermostat. Added alternate scheduling & religious scheduling to climate/const.py
* Fix Flake8 Errors in climate.py
* Fixing more flake8 errors in climate.py
Removed duplicate set_preset_mode def
* Fixed more flake8 errors.
Please be the end of these errors.
* Fixed black formatting
* Fixed black, broke flake8, fixed flake8
* Fixed CODE_TO_FAN_STATE black error
* Fixed isort issues
* Local isort broke black formatting
Docs should run isort before black. Default isort will undo certain black formatting.
* Removed last commas from imports
* Added removed line
* Fixed formatting
Hopefully this is what the CI pipeline is looking for.
* Ran isort from git repo root, utilizing setup.cfg.
* One more try
* fixed added definition and fixed logger string
* fixed formatting
* lost a close-paren
* Update const.py
Removed radiotherm specific presets
* Update climate.py
Moved preset definitions into radiotherm climate.py
* added update listener if max_age is set
* remove commented out code
* streamline test code
* schedule next update based on the next state to expire
* fixed update process
* isort
* fixed callback function
* fixed log message
* removed logging from test case
* Add boundary name to state if it exists
If the robot is cleaning a pre defined area with a name, add the name to the state-attribute.
* Reformat patch
* Removing whitespace
* Even more formatting
That black did not catch on first run...
* Added support for template alarm panel
* Rewrote tests in new async format
* Fix stale docstring
* Update to tests, standardization on NAME vs FRIENDLY_NAME
* Steam Online: Add last_online and Level attributes
* Steam Online: Add last_online and Level attributes
* Fixes from comments on initial pull request
* Push attributes only if they are not None
* Split async_update
* Use pytest parameters to avoid duplicate code
* Fix UnboundLocalError
* Test error rendering for template state
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* move constants, move schema validation to init, prepare for zeroconf/config flow
* mistake in refactor
* update .coveragerc, move validate_auth to __init__, only attempt to get ESN if device setup is validated
* fix schema validation
* remove suppress warning config option
* remove config_flow from manifest since its not ready yet
* update requirements_all.txt
* fix issue with merge conflict
* Refactor input_boolean to use config dict for instantiation.
* Refactor input_boolean to use YamlCollection.
* Add storage collection to input_boolean.
* Update homeassistant/components/input_boolean/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Doh.
* Address comments.
* Add editable device state attribute.
* Clean up entities from entity registry on removal.
Reload yaml from correct source.
* Add tests.
* Update homeassistant/components/input_boolean/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Don't reset entity state on updates.
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* move constants, move schema validation to init, prepare for zeroconf/config flow
* update requirements_all and make setup validation more pythonic
* mistake in refactor
* un-revert change from previous PR
* rename schema var
* update .coveragerc, move validate_auth to __init__, only attempt to get ESN if device setup is validated
* reinstate validate_setup but change logic to use new connection test function
* fix schema validation
* simplify string empty check logic
* missed commit
* Initial implementation
* Passing autobypass parameter to constructor, as suggested
* Black formatting
* Removed default value from autobypass parameter of the constructor, as it's redundant
* Add pilight dimmer as light component
* fix CI errors
* fix missing new lines
* improve formatting and addresses comments of @springstan
* rename config parameter and remove super() call to match pylint
* import only used constants of the pilight component
* Add myself to the code owners
* fix CODEOWNERS
* Add tests
* Add FileSync test
* Fill in services.yaml for 'androidtv.adb_filesync' service
* Update example paths in services.yaml
* Bump androidtv to 0.0.37
* Bump androidtv to 0.0.37
* Bump androidtv to 0.0.37
* Import LockNotAcquiredException
* Import LockNotAcquiredException from androidtv.exceptions
* Rename 'host' to 'address'
* Add a logging statement when an ADB command is skipped
* Check hass.config.is_allowed_path(local_path)
* Add return
* Fix pylint
* Reduce duplicated code (AndroidTVDevice vs. FireTVDevice)
* Split 'adb_filesync' service into 'download' and 'upload' services
* Don't use '.get()' for required data; return if the services are already registered
* Replace "command" with ATTR_COMMAND
* Don't try to connect to a device if it is a duplicate
* add surepetcare
* cleanup
* remove unused imports and comments
* remove comment
* fix bug which prevented updating the sensors
* improve config validation
* fix voluptuous usage
* fix format & credential storage
* various fixes to hass-conform
* small format fixes
* change False to None
* still trying to be hass-conform
* remove unused class
* fix imports
* fix f-string
* add guard clause?!
* central data fetch
* do not pass in hass, will be provided automatically
* make the linters happy
* disable constant-test warning and add commas
* worksforme
* fix link in manifest
* remove icon
* bump surepy to 0.1.5
* worksforme
* small doc fixes
* add discovery_info guard
* result of another awesome review
* and again :)
* exclude surepetcare in .coveragerc
* Add LED control
* Bump python-velbus library to 2.0.35
To have LED control available in library
* Apply black formating
* Fix no-else-return pylint error
* Changed to f-string and more dry code
* Rewrite turn_on for LED control
* Preserve new BLE device name if one seen before the last scan but not on it
* Save an indented else block
* Use async_fire_time_changed and mock_device_tracker_conf in tests
* Migrate automatic tests from coroutine to async/await
* Remove unneeded side effect
* Replace unittest with asynctest, add additional asserts to tests
* add unique id property for Vizio devices so they get added to entity registry
* update requirements
* small change to make code more readable
* update to use f-string for consistency
* fix property name
* set unique_id to none if serial number couldnt be found
* set unique_id to none
* ESN should be globally unique so no device type needed. pyvizio will set ESN to None if ESN is unobtainable
* Simplify media player source list
Google don't need a whitelisted set of modes anymore. So let's just forward any mode that we have.
* Report current mode with the setting name, not a synonym
* Refactor mode generation to support other modes
* Support sound mode as mode as well
* Adjust failing test now with sound modes
* Make sure first poll happens after sub-platforms are loaded and entities are created.
* Function dosn't need to return anything
* Don't forward entry if already forwarded it
* Don't expose flows that aren't initialised.
If a flow init does not return immediately then there is a window where our
behaviour is screwy:
* Can try to configure a flow that isn't ready
* Can show notifications for discoveries that might yet return an abort
This moves the flow discovery events and notifications to after the flow is
initialised and hides flows that don't have a cur_step from async_progress
* Fix tradfri test
* Black.
* Lint fixes
* add KEF speakers platform for the integration
This will work with the KEF LS50 Wireless and KEF LSX speakers.
The development of this code happened on https://github.com/basnijholt/media_player.kef
* rename DATA_KEF -> DOMAIN
* use aiokef v0.2.0 and support LSX and new features
* sort imports
* fix @MartinHjelmare's suggestions
* remove _CONFIGURING
* change STATE_UNKNOWN to None
* use lat and long for unique_id
* bump aiokef to v0.2.2
* use config[ATTR] instead of config.get(ATTR)
* use getmac
* fix case when MAC is None
* use host as instance lifetime id
* fix requirements
* HomeKit: update position state characteristic for covers
position state is a mandatory characteristic for HK window coverings
* Test position state characteristic
Convert values to integer if rounding precision is zero. With that a
value which is an integer before filtering can be configured to stay
integer when using precision = 0. This also aligns behavior of filters
to how rounding behaves in tempaltes (homeassistant/helpers/template.py,
function forgiving_round).
* Use config entry unique id
* Clean up
* Backwards compatiblity note
* Fix some of Balloobs comments
* Bump dependency to v66
* Black somehow missed config flow tests...
* Move set unique ID til after possibility to update existing entry
* Add SUPPORT_STREAM to supported_features.
* Implement stream_source with channel RTSP URIs.
* Add Tests for Stream Support.
* Make stream_source async.
* Removed unused import.
* Re-wrote test to remove warning, and lint error.
* Add generic command functionality to denonavr
* add minimal unit tests for denonavr
* fix import order
* simplify denonavr unit test
* handle domain specific service calls with dispatcher
* update unit tests
* update unit tests
* remove unnecessary return value
* fix handling of mock instances in unit tests
* migrate webostv to new aiopylgtv version of the library and add support
for generic commands, input/button commands, and callback state updates
* update requirements
* cleanup and bump aiopylgtv version
* update webostv unit tests
* make webostv unit tests work with python 3.7
* cleanup for code checks
* cleanup and code review
* make all client request functions coroutines
* make host required for webostv configuration
* remove generic command and button functionality plus related cleanup
* fix previous track function
* update unit tests
* fix imports for unit tests
* update unit test
* further unit test updates
* remove unnecessary setup call in unit tests
* restore previous behaviour with client key config file in hass configuration directory
* Refactor ZHA component tests fixtures.
* Add tests for ZHA device discovery.
* Refactor ZHA registry MatchRule.
Allow callables as a matching criteria.
Allow sets for model & manufacturer.
* Minor ZHA class registry refactoring.
Less cluttered strict_matching registrations.
* Add entities only if there are any.
* Migrate rest of ZHA platforms to ZHA registry.
* Pylint fixes.
* Update lock.py
Allow different command and state topic + different command and state values.
* Formatting updated after black run
* TC updated to reflect different state & cmd values
* Abbreviations for lock states added
* additional non-default state test
* whitespaces fixed
* black formatting run
* [solaredge] Reduce Severity of Log Line
This log error happens frequently for some sites, but it shouldn't be an error.
It is expected, per the SolarEdge Monitoring API, that some sites do not
support this information, and the expected result is that this would be
empty (see comments on #27959).
Fixes#27959
* Fix a typo
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Added support for Somfy RTS wireless power socket and
Somfy Temperature Sensore Thermos Wirefree io
* Added code formatting fixes for commit 5faaf9c
* added support for RollerShutterRTSComponent from Somfy
* Added support for RTS roller shutter in set_cover_position
* Add support for Somfy RTS power socket and Somfy io temperature sensor
* black and isort fixes
* homematic: Add host port config for HMIP-only CCUs
When adding a host (CCU) to the homematic component currently the hardcoded port 2001 is used to communicate with it.
However that port is only available on the target if the target supports HM (wireless) protocol which is not the case e.g. for
the Hass.io Homematic CCU addon when running in HMIP-only mode with the HMIP-RFUSB stick.
This allows to change the port home assistant uses to talk to the CCU in order to provide services under hte homematic homain, e.g. homematic.set_variable_value
The default value for this option is the old hardcoded value this the change should be backwards compatible with existing configurations.
* Change style of config retrieval
* Added localip component
* Split config and core logic, and migrate to sensor platform (requested by @MartinHjelmare)
Also allow overriding the sensor name via the config
* Tweak docstring
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Initial support for config entries
* Rename localip to local_ip (1/2)
* Rename localip to local_ip (2/2)
* Add test for config_flow
* Split and rename tests
* Remove unneeded code from config_flow
* Implement configuration as config entry import. Other misc requested changes from code review.
* Fix tests
* minor code review fixes
* remove unneeded code
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Store capabilities and supported features in entity registry
* Restore states at startup
* Restore non-disabled entities on HA start
* Fix test
* Pass device class from entity platform
* Clean up restored entities from state machine
* Fix Z-Wave test?
* fix handling of symlinked device decriptors
* make check for symlinked paths more efficient
* make variable names pylint compliant
* move sync io during setup and device connect/disconnect to executor thread pool
* move remaining sync io during setup to executor thread pool
* remove unnecessary lambda functions
* Added support for Somfy RTS wireless power socket and
Somfy Temperature Sensore Thermos Wirefree io
* Added code formatting fixes for commit 5faaf9c
* added support for RollerShutterRTSComponent from Somfy
* Added support for RTS roller shutter in set_cover_position
* added support for enocean window handle FA 10 00 (Hoppe)
* removed spaces in empty lines
* removal of rawdata attribute / code style
* isort fix
* PyLint fixes
* Improvements after review suggestions: rename device class to sensor type to avoid ambiguousness
* added import for DEVICE_CLASS_POWER from const.py
* removed window handle unit
* Pull track position from MPD status()
This allows the progress bar to work when using the media-control card in lovelace.
* Actually commit flake8 fix!
* Extra documentation.
Mainly to trigger CI rerun.
* Updated to use self._media_position
* Add support for HobbyBoards sensors: Hub, Humidity, Moisture, PulseCounter
Add support for an owserver running on a remote host
* Cleanup and fixes for style/etc
* Forgot to convert to f-strings.
* Update with changes requested by @MartinHjelmare
* Pylint
* Fix to None
* Reverse logic for hobbyboard test to eliminate pylint complaint
* Modified manifest to list myself as codeowner
* Move some functions down into OneWireProxy instead of the top OneWire
* Oops, missed some decode()'s
* And another!
The number of total blocks is always a round number. There can't be .1 or .11 blocks for example. The output is now always formatted with two decimals that are always 00.
* Add support for input_number entities
* Update homeassistant/components/alexa/capabilities.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Removed get methods to directly access required attributes dicts.
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* fixed parsing of current to float in service set_current
* Added optional name in the config file in order to get a better entety naming (easier to find)
* fix parsing of all parameters to service calls
* addressed code review comments + updated pypi dependency
* config name imported from cont.py + minor naming changes to be more clear about the meaning of a sensor
* removed name in config again, use product name gathered from the charging station instead
* implemented suggested changes
* changed variable naming as requested
* Mechanism to rediscover a discovery that was ignored
* Add core config entry tests for new rediscover step
* Add tests for homekit_controller implementation of async_step_rediscover
* Rename rediscover to unignore
* Comment the new ignore/unignore mechanisms
* fix binary sensor offline/online
fixed self._handle_update on line 66 to produce args, kwargs.
Updated the binary sensor to check the correct index in the tuple.
* Fixed Standby switch
Set standby switch to poll in order to get status when homeassistant starts up.
Updated the index for the switch to get the status from the tuple.
* Fix imports so it works in custom_components
* Rework tado component
* Code cleanup
* Remove water_heater
* Address pylint warnings
* Remove water_heater from components
* Raise PlatformNotReady when we couldn't connect
* Revert PlatformNotReady since we are not a platform
* Add debugging information
* Add fallback setting
* Import with relative path
* Address race condition
* Cleanup
* Catch 422 Errors and log the real error
* Use async_schedule_update_ha_state to update the entities
* Forgot the True
* Include all SSDP data in discovery info
* Use UPnP device description as discovery info, inject some SSDP attrs
* Clean up attribute names
* Adapt existing SSDP flows to changed attribute names
* Prefix all SSDP UPnP attribute name constants with ATTR_UPNP, tweak a bit
* Make name customizable for nmbs live sensors
* Change order of the live name
* Added unique id to live nmbs sensor
* Revert changing the name of the live sensor
* Refactor capabilityResources object into class.
Implement semantics object to support open, close, raise, lower utterences.
Replace covers PercentageController with RangeController.
Add semantics for covers.
Remove PowerController for covers.
Add new display categories.
Add new items to Alexa Global Catalog.
Implement garage door voice PIN code support though Alexa app.
Fixed bug with getting property for ModeController.
Fixed bug were PercentageController AdjustPercentage would exceed 100.
* Comment fixes in Tests.
* Reorder imports.
* Added additional tests for more code coverage.
* Added and additional test for more code coverage.
* Explicitly return None for configuration() if not instance of AlexaCapabilityResource.
* Add unit_of_measurement to various Transmission sensors
Without unit_of_measurement, the history graph card will not show those sensors as line chart.
* Change Counts to Torrents.
This brings back support for Z-Wave thermostats
of SETPOINT_THERMOSTAT specific device class.
Such devices don't have COMMAND_CLASS_THERMOSTAT_MODE
and are now handled separately.
* Fix https://github.com/home-assistant/home-assistant/issues/29853
* Run script.gen_requirements
* Update to store Token File in config directory
* Update to store Token File in config directory
* Update to store Token File in config directory
* fix binary sensor offline/online
fixed self._handle_update on line 66 to produce args, kwargs.
Updated the binary sensor to check the correct index in the tuple.
* Fixed Standby switch
Set standby switch to poll in order to get status when homeassistant starts up.
Updated the index for the switch to get the status from the tuple.
* Update manifest.json
Updated sensor to use the latest version of the API to be able to use the new features.
* Updated sensor to use new API features. Configurable credentials and Inverter last reported date.
* EnvoyReader is passed to Envoy uses async update()
* Fixed pydocstyle warnings
* Fixed merge issue. Had extra variable.
* Added warning message when authentication for Inverter data fails
* Added continue after exception for loop
* Moved if statement outside of try/except
* Removed unneeded boolean attribute
The Fibaro FGR-222/FGRM-2222 ZWave roller shutter devices have a proprietary
command class to support setting the tilt angle of venetian blinds (= type of
window cover). This PR adds the support to HA for this. This allows the user to
set the height of the blinds and the tilt angle separately.
Original patch by @ChristianKuehnel #24405.
* Making tplink light more responsive.
* Adding light platform tests.
* Addressing PR feedback.
* Mocking the module, not the api.
* Using sync method for background update.
* Show current effect in yeelight device
* Use device_state_attributes instead of state_attributes
* Add early return in set effect
* Make single if elif chain
* Fix if elif
* Fix if elif
* Add unique ID to config entries
* Unload existing entries with same unique ID if flow with unique ID is
finished
* Remove unused exception
* Fix typing
* silence pylint
* Fix tests
* Add unique ID to Hue
* Address typing comment
* Tweaks to comments
* lint
Using the locals parameter makes it so that the code of a Python script runs as
if it were in the body of a ``class``. One effect of this is that functions
defined as part of a script cannot call one another directly.
Fixes: #24704, #13653
This brings back support for Z-Wave thermostats
of SETPOINT_THERMOSTAT specific device class.
Such devices don't have COMMAND_CLASS_THERMOSTAT_MODE
and are now handled separately.
* Bump adb-shell to 0.1.0 and androidtv to 0.0.36
* Add test for setting up two devices
* Add test_setup_same_device_twice
* Fix test_setup_two_devices
* Fix coverage
* Coverage
* Fix flaky 'test_setup_two_devices'
* Another stab at coverage
* Rename 'address' back to 'host'
* Fix https://github.com/home-assistant/home-assistant/issues/29853
* Run script.gen_requirements
* Update to store Token File in config directory
* Update to store Token File in config directory
* Update to store Token File in config directory
* Implement Alexa.EventDetectionSensor Interface
* Removed references to PR #28218 not yet merged into dev.
* Update tests to include Alexa Interface
* Guard for `unknown` and `unavailible` states.
* Fixed Unnecessary "elif" after "return"
* Adding filters for keypad dimmers and smoke sensor
* ran black --fast as suggested
* Adding filters for keypad dimmers and smoke sensor
* ran black --fast as suggested
* Update configuration schema to support multiple Pi-holes
* Construct sensors for each configured Pi-hole
* Ensure each Pi-hole has a unique name
* Update services to handle multiple Pi-holes
* Update tests for multiple configurations
* Refactor tests to support service testing
* Fix else-raise per pyliunt
* Per code review, add all entities in a single call
* Per code review, add the default name as default.
* Per code review, add cv.ensure_list to prevent breaking change
* Per code review, move name validation to schema
* Remove default name
* Per code review, validate api_key in schema definition
* Per code review, rename variables
* Per code review, use list comprehension
* Ensure unique slug names in config validation
* Per code review, refactor to CoroutineMock
* Fix adding sensor entities
* Per code review, refactor mock function creation
* Per code review, refactor mock function return values
* Added dummy user-agent to http request to fix setup error
* Replace dummy user-agent with the user-agent of the global home assistant session
* Adjust comment and rename user-agent constant
* Added dummy user-agent to http request to fix setup error
* Replace dummy user-agent with the user-agent of the global home assistant session
* Adjust comment and rename user-agent constant
* Added a check for Connect actually returning something before telling the user the setup succeeded
* Added handling for KeyError in case API returns empty response, formatting
* Trying to please the linter
* Fixing issue where wrong sleep state entry was being used. closes #28370,#29397
* Fixing formatting.
* Sorting imports to get black checks to pass.
* Using lambda for getting latest sleep serie.
* Re-authorize Huawei LTE on login required error
Closes https://github.com/home-assistant/home-assistant/issues/29531
* Eliminate one indented "else" block
* Convert get_data from inline to instance method
* Use .get instead of [] for checking subscriptions for clarity
* Include MAC address in device state attributes for absent devices too
* Use MAC address as default name whether device is connected or not
* Fix initialization of known entities
Closes https://github.com/home-assistant/home-assistant/issues/29354
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
* add skeleton to retrieve zigbee groups
* get single group
* add a group
* return group members with group
* add comment
* fix group members
* add function to add device to group
* add group members
* add remove from group method
* add api to remove members from group
* add remove groups method
* clean up group add and remove
* fix remove group
* fix remove groups
* add api to get only groupable devices
* change var init
* add tests
* address review comment
* use isort to sort imports for components starting with 'z'
* add skip to end of zha/core/channels/__init__.py
* put 'pylint: disable=import-error' at the right place
* remove the import of config_flow in zha/__init__.py
According to @balloob it is no longer needed.
* revert previous commit
* isort:skip homeassistant/components/zha/__init__.py completely
* iCloud: setup ConfigFlow and prepare for more platforms
- add config flow + tests
- fix existing services
- add play_sound & display_message services
- document services
- can use devices with the same name
- prepare to add sensor platform
* Review : not copy account conf
* Review: Safer test patch
* Review: remove reset_account
* Review: Use executor_job while IO
* Review: Use executor_job while IO 2
* Review: use hass.helpers.storage.Store()
* Review: no IO in tests
* Remove reset from services.yaml
* Review: remove authenticate.return_value = Mock()
* Review: do not initialize the api with the mocked service
* isort
* Review: @MartinHjelmare Test config flow with all steps
* Review: Fix failed tests names
* Codevov: Add one missing test
* Move imports to top for homekit
* Moved back a couple imports, added annotation to disable import-outside-toplevel
* Fix all tests in test_homekit.py
* Wrap connection attempt by try/except block so an individual downed doorbird does not fail the whole platform
* Fixed lint warning
* Disable too-broad-exception pylint warning since the whole point of this is to catch all exceptions and log them while letting processing continue; I don't disable a lint warning lightly, but this is the entire intent of this PR.
* Fixed name of pylint warning to broad-except
* Use _LOGGER.exception to get the stack trace too, per PEP8 recommendation for a bare Exception being caught.
* per @balloob, switch to just catching OSError on a narrow block; I'm not sure this protects all problems with Doorbird device startup, but it protects against the primary one I experience.
* added signalmessenger integration
* allows to send a message (with an attachment) to one or more
recipients
* added signalmessenger documentation to manifest file
* remove debug logging from signalmessenger integration
* add signalmessenger to .coveragerc
* fixed typo in signalmessenger manifes
* moved service specific code to own pypi library
* updated pysignalclirestapi dependeny in manifest.json
* added pysignalclirestapi requirement for signalmessenger component
* fixed typo in codeowners
* reworked signalmessenger integration based on code review input
* updated requirements for signalmessenger
* small code improvements in signalmessenger integration
* no need to use the get() method to access dict parameters that are
required
* small changes in signalmessenger integration
* re-ordered import statements
* removed empty "requirements" list (not needed)
* changed import order in signalmessenger integration according to PEP 8
* used isort to order includes in signalmessenger integration
* renamed signalmessenger to signal_messenger
* renamed signalmessenger to signal_messenger in CODEOWNERS file
* changed documentation url in signal_messenger integration to new name
* changed signal messenger naming in .coveragerc
* Adding tests for vera component.
Fixing update bug in the vera climate platform.
* Updating requrements file.
* Moving vera stop to a job.
Sorting imports.
* Addressing simple PR feedback.
* Splitting tests into platforms.
* Mocking controller instead of using requests_mock.
* Updating pyvera to use version that stops threads quickly.
* Updating requirements files.
* Mocking the pyvera module, not the API.
* Addressing PR feedback.
Handling start/stop of patch in fixture.
Removing unecessary code.
* Using generator
The obj["state"] contains already several named return states as
following: "grass cutting", "trapped recovery", "searching wire",
"following wire", "searching home", "home", "idle"
And with the batteryChargerState also the "charging"
Fixes#455
* Don't escape command parameters
Escaping should only be done when using the tcp socket cli interface which we aren't.
* Updated comment to reflect the changes
* Add clear traffic statistics service
* Add reboot service
* Register services as admin ones
* Make URL optional when there's only one router configured
* Eliminate one if/else indent level
* Remove unnecessary .keys() with sorted()
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Change date for test for utility_meter
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Move imports to top for google_assistant
* Fix pylint error caused by isorting the imports with noqa: F401
* Move back an import because of circular dependency, add annotations
* Add Elgato Key Light integration
* Remove passing in of hass loop
* Tweaks a comment
* Tweaks a function name
* Ensure domain namespace in data exists in entry setup
* Move imports to top for zha
* Move back some imports, add annotation for disabling import-outside-toplevel
* Move import config_flow before import api
* Include MAC address in device state attributes for absent devices too
* Use MAC address as default name whether device is connected or not
* Fix initialization of known entities
Closes https://github.com/home-assistant/home-assistant/issues/29354
* Move imports to top for soundtouch
* Format with black
* Fix pyling error by renaming variable
* Rename entity instances to include entity instead of device
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
* Add input_boolean reload service.
* Add reload test.
* Address comments.
Register reload service as an admin service
Setup platform even if there're no entities
* Move imports to top for mochad
* Fix test test_light.py for mochad
* Fix test test_switch.py for mochad
* Make intra package imports relative in switch and light
* Move imports to top for statistics
* Added recorder to manifest.json
* Deleted recorder from manifest.json, moved import back into method, added pylint disable comment
* Moved recorder util imports away from the top
* Move recorder imports to top, add recorder as after_dependency to manifest.json
* Move imports to top for islamic_prayer_times
* Fix test_sensor.py for islamic_prayer_times
* Format test_sensor.py with black
* Fix tests for islamic prayer times sensor
* Report unavailable entites to google.
Entities should only removed when removed from HA. Removing a temporarily unavailable entity from google causes it to need to re-configured once it become available again.
* Fix test for unavailable entities
* Make async_report_state take agent_user_id
* Attempt to store synced agents
* Drop now not needed initialization
* Make sure cloud uses the all sync on changed preferences
* Some more places to use all version of sync
* Get the agent_user_id from the request context if available
* Minor cleanup
* Remove the old fixed agent_user_id for cloud
Instead pass along cloud_user where appropriate.
* async_delay_save takes a function
* Adjust test for delayed store
* Remove unused save function
* Add login check.
* Updated heatmiserV3 initial commit
* Fixing heatmiser component
* Updated codeowners and heatmiserV3 version
* Updating files as part of PR process
* Removed extra _LOGGER statements.
* Added in HVAC_MODE_OFF to allowed states to track whether heating on/off
* Handling PR comments
* Removed legacy tests
* fixing pylint errors
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Updated climate based on latest feedback
* Removed cast to int and update requirements
* Update requirements
* Updated heatmiser deps
delete incorrect 'mdi:brightness-3' in final
```
def icon(self):
"""Icon to use in the frontend, if any."""
return MOON_ICONS.get(self.state, "mdi:brightness-3")
```
which still shows in the sensors attributes
* Added check for "name" channelMetada attribute
* Added/changed smart home media player tests for added value name in chanelMetadata payload section
* Since Alexa only expects a number/callSign/affiliate in the returned response, returning "name" is not technically valid. Modified to return the value in the callSign field instead since it's a text value. Since there is no returned channel number, cannot return a true numeric value in "channel" field
* Improve Alexa interface selection for binary sensors
This allows the sensor to work correctly as a contact or motion sensor
in alexa, if the user overrides its display category as such.
* add tests
* Add broadlink remote control platform
* Fix order of the imports
* Add remote.py to .coveragerc
* Optimize MAC address validation
* Use storage helper class and improve code readability
* Add me to the manifest as a code owner
* Fix dosctring
* Add me to the code owners
* Remove storage schemas, rename storage keys and improve readability
* move service constants to const.py, move all custom xiaomi_miio services to xiaomi_miio domain
* update service names
* try to fix black error
* try black formatting again
* final black formatting attempt
* update service names to reflect platform
* fix typo
* Clear state on exception
Clear state if querying the device fails. The state is then set to unknown, so it can be tracked if a miflora device isn't responding any more.
* Add available()
Signal valid data via available()
* Add ATEN PE component for ATEN eco PDUs
* aten_pe: Require host configuration
* aten_pe: Do not import from other integrations
* aten_pe: Include unnamed outlets
* aten_pe: Avoid get() for config entries having default values
* aten_pe: Fix documentation URI
* aten_pe: Remove unused return value
* aten_pe: Update atenpdu lib to 0.2.0 for asyncio
* aten_pe: Raise exception if initialization fails
* aten_pe: Update atenpdu lib to 0.3.0 for improved exception handling
* Add Huawei LTE binary sensor support, mobile connection sensor
* Improve mobile connection sensor icon docstring
* Remove device class for permission to use a more descriptive icon
* Added device trigger to alarm control panel
* Added supported features to check that device has certain trigger
* Fixed tests for device_trigger
* Fixed pylint error
* Removed pending trigger and removed trigger condition
* Resolve hosts for fritzbox_callmonitor
If the configuration supplied "host" is not an IP address, try resolving it
* always use gethostbyname
Instead of just checking whether it is an IP and if it isn't try to resolve; just resolve it; IPs will be returned unchanged, and hostnames will be resolved.
* Catch error if the hostname cannot be resolved
* Don't fallback to default host
If the hostname cannot be resolved; don't try to fallback; just print the error message.
* Fail setup if hostname cannot be resolved
If the hostname cannot be resolved, log an error and stop the setup;
no entities will be then created.
* Added DSMR Reader platform
- Added DSMR Reader platform
- Updated codeowners for other components I added earlier
* Move sensor definitions to new file
* Sensor definitions in new file
* Add energy prices from MQTT
* lint fixes
* Black formatted some files
* Update .coveragerc
* Support transform methods on definitions
* Manifest mangled by Black, fixed
* Visual studio code reformatting dictionary error
* Fix issues with code, remove unrelated manifest changes
* Update CODEOWNERS
* Only create cloud user if cloud in use
* Pass context to alexa
* Update requirements
* Fix handing & design pattern for 0.30
* fix tests
* Fix lint & tests
* rename internal user
* update demo service domain and service description
* move DOMAIN and service name to const.py
* update per balloob's service name suggestion
* update service name in services.yaml
* update service name constant's name
* Adding lutron_caseta fan controller. Updated to pylutron 0.5.1
* Accidental import remain
* updating for black formatting
* Fix blank spaces
* Moving third party import
* update to 0.5.1 to pass checks
* fix deletion of new line
* Update fan.py
* Update with dev branch, update from comments, added mediumhigh
Instead of using the roku.power method, which toggles power,
implement the media_player.turn_on command for the roku component
by calling the new roku.poweron method.
Fixes#28961, but depends on upstream
https://github.com/jcarbaugh/python-roku/pull/53
* Add opentherm_gw device support
* Add support for enabling/disabling of opentherm_gw entities
* Disable sensors by default, base climate entity_id on gw_id instead of friendly_name to guarantee uniqueness
* Remove platform name from unique_id
Since 2019.1 has launched there is a perfectly reasonable (in fact the standard) case where ios component is loaded (i.e. actionable notifications) but no devices are registed for the now defunct `ios.notify` service. As such, the log warning relating to this case is no longer relevant.
* Upgrade upcloud-api to 0.4.5
* Fix UpCloud name spelling in manifest
* Update data at setup time for better initial states
* Clean up signal handlers on remove
* Signal data update on server start
To keep related binary sensor better up to date.
* Improve track_time_interval emulation for initial update
* Move request sync logic into GoogleConfig
* Return http status code for request_sync same as cloud
* agent_user_id is not optional for async_sync_entities now
* No need in checking parameter here
* Adjust some things for cloud tests
* Adjust some more stuff for cloud tests
* Drop uneccessary else
* Black required change
* Let async_schedule_google_sync take agent_user_id
* Assert return value on api call
* Test old api key method
* Update homeassistant/components/google_assistant/helpers.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Make rest sensor a little bit more flexible and allow the response to be a list with 0th element being a dictionary
* Black formatter wanted a different formatting
* Added test case for a list response with dict as 0th element
* Fixed lint error - it thinks a + STRING is an avoidance of using % sequences for log messages; I generally prefer explicit + rather than string juxtaposition for combining string literals, but sounds like that's not the standard
* Fixed test case -- I added it to the wrong scenario and need to use the one with json_attrs.
Although I originally contributed this component, I no longer use it myself and haven't been following the internal development of HA, so I'm no longer a good person to review any further changes to this component. I would therefore like to relinquish my CODEOWNER status over this component.
* Added Post Processing Jobs to NZBGet component
In the current implementation of the NZBGet component there is no way of
knowing whether NZBGet is still in the Post Processing phase of a download
job. This can be very useful information. For instance when you want to
suspend the NZBGet service when all queue items have been completed.
This change adds that additional sensor.
* Renamed Count to Jobs in NZBGet component
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* use get instead of direct keys for dict
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* use get instead of direct keys for dict
* changed get back to []
* move service constants to const.py, update blackbird custom service domain
* Readd bluesound services.yaml entries since it should be part of a different branch
* update service domain for local_file from camera to local_file
* remove service.yaml entry in camera component as part of change
* fix test
* move constants to const.py
* add local_file/const.py to .coveragerc
* remove local_file/const.py from .coveragerc since component has tests
* add model and serial to caseta devices
* use just serial for unique id
* add display name for entity registry
* remove caseta device model
* just store device
* state and device are the same
* Update WazeRouteCalculator to 0.11
* Update WazeRouteCalculator to 0.11
* Adding new config options to Waze
* Fixing avoid subscription option
* Update WazeRouteCalculator to 0.12
There was an error in the underlying lib
* Update WazeRouteCalculator to 0.12
* Fix digest auth rest sensors
* Refactor to use request()
* Fix black complaints
* Don't rename data variable
Don't rename the data variable, appears several other sensors have been coded to rely on it
* Fix tests
test_setup_missing_schema:
Change the exception to check for to PlatformNotReady. With the change away from prepared statements, we no longer get the MissingSchema error during setup - we get it when we attempt to call the endpoint. Since the result is PlatformNotReady, which is what we want, and the error log clearly contains a note that the schema is incorrect I think this is fine.
test_setup_failed_connect & test_setup_timeout:
These aren't checking for minimum config, and they're not invoking the correct method to have the default config filled in. Therefore I've just added the correct minimum config so these can continue to test what they're there to test.
test_update_request_exception:
Testing a request exception with the assert on line 404! Excellent. Anyway, we've moved from using the requests Session object to the requests.request function - so the patch needed to be altered to ensure the RequestException was raised.
* Remove no longer needed import
* Fix binary sensor test in same way
* Explicitly include Alexa Interface to discovery response.
* Updated cloud component test to reflect additional Alexa interface.
* Updated test for recently added SeekController.
* Make sure to cast the volume_level of a universal media_player to a float
* Fix test that expects the wrong bahaviour
* Catch exception instead of checking for None
* Fix Onvif setup error with a premature end of connection on GetStreamUri wsdl call
Reconnect to onvif camera after getting profiles to fix this error :
[homeassistant.components.onvif.camera] Retrieving stream uri
[zeep.asyncio.transport] HTTP Post to http://192.168.1.15/onvif/Media:
b'<?xml version=\'1.0\' encoding=\'utf-8\'?>\n<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope"><soap-env:Header><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecur
2019-09-20 01:08:51 ERROR (MainThread) [homeassistant.components.camera] Error while setting up platform onvif
Traceback (most recent call last):
File "/usr/local/lib/python3.7/site-packages/aiohttp/client_reqrep.py", line 553, in write_bytes
await self.body.write(writer)
File "/usr/local/lib/python3.7/site-packages/aiohttp/payload.py", line 231, in write
await writer.write(self._value)
File "/usr/local/lib/python3.7/site-packages/aiohttp/http_writer.py", line 101, in write
self._write(chunk)
File "/usr/local/lib/python3.7/site-packages/aiohttp/http_writer.py", line 67, in _write
raise ConnectionResetError('Cannot write to closing transport')
ConnectionResetError: Cannot write to closing transport
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 150, in _async_setup_platform
await asyncio.wait_for(asyncio.shield(task), SLOW_SETUP_MAX_WAIT)
File "/usr/local/lib/python3.7/asyncio/tasks.py", line 442, in wait_for
return fut.result()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 110, in async_setup_platform
await hass_camera.async_initialize()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 168, in async_initialize
await self.async_obtain_input_uri()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 266, in async_obtain_input_uri
stream_uri = await media_service.GetStreamUri(req)
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/bindings.py", line 13, in send
options["address"], envelope, http_headers
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/transport.py", line 107, in post_xml
response = await self.post(address, message, headers)
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/transport.py", line 95, in post
proxy=self.proxy,
File "/usr/local/lib/python3.7/site-packages/aiohttp/client.py", line 497, in _request
await resp.start(conn)
File "/usr/local/lib/python3.7/site-packages/aiohttp/client_reqrep.py", line 844, in start
message, payload = await self._protocol.read() # type: ignore # noqa
File "/usr/local/lib/python3.7/site-packages/aiohttp/streams.py", line 588, in read
await self._waiter
aiohttp.client_exceptions.ClientOSError: [Errno None] Can not write request body for http://192.168.1.15/onvif/Media
* Add code comment
* Update camera.py
* Lint.
* Improve z-wave thermostat support
Discover thermostat using COMMAND_CLASS_THERMOSTAT_MODE
so that it is a single entitiy in case there are multiple
setpoints. z-wave docs mention it is always present.
Add support for single/range target temperature depending
on the current thermostat mode.
* Remove debug print
* Refactor Z-Wave dynamic setpoint(s) selection
- use explicit mapping between modes and setpoints as defined in
Z-Wave specs
- add tests for away (2 setpoints) and heat eco (1 setpoint) modes
* Add non-standard thermostat mode aliases
* Added availability_template to Template Cover platform
* Added availability_template to Template Binary Sensor platform
* Added availability_template to Template Fan platform
* Added availability_template to Template Light platform
* Added availability_template to Template Sensor platform
* Added availability_template to Template Switch platform
* Added availability_template to Template Vacuum platform
* Added availability_template to Template Lock platform
* Added to test for invalid values in availability_template
* Black and Lint fix
* black formatting
* Added to test for invalid values in availability_template
* black
* Added to test for invalid values in availability_template
* Added to test for invalid values in availability_template
* simplified exception handler
* Fixed Entity discovery big and coverage
* Added to test for invalid values in availability_template
* flake8
* fixed component ID in test
* Added to test for invalid values in availability_template
* Added to test for invalid values in availability_template
* Made availability_template redering erorr more concise
* Cleaned template setup
* I'll remember to run black every time one of these days...
* Refactored Template initialisation
* Refactored Template initialisation
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fixed linting issues
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Removed 'Magic' string
* Removed 'Magic' string and removed duplicate code
* Removed 'Magic' string
* Removed 'Magic' string
* Brought contant into line
* Refactored availability_tempalte rendering to common loop
* Removed 'Magic' string
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* Fixed tests (magic values and state checks)
* Fixed tests (magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Removed duplicate
* Clean up and remove debug
* Reverted Dev Container Change
* Add supported_features to Alarm Control Panel
* mark supported_features abstract
* Add SF to async_register_entity_service
* fix test
* Add missing SF SUPPORT_ALARM_ARM_CUSTOM_BYPASS
* isort
* fix async_register_entity_service
* Update alarm_control_panel.py
* Added Alexa.ModeController to cover entities.
* Added synonyms for directives.
* Updated tests for additional synonyms for directives.
* Added Alexa.ModeController to cover entities.
* Sacrifice unused variable in split() to please the Pylint gods.
* Removed duplicate instance check.
* Corrected variable name, clarified definition and consistency.
* Changed list to tuple.
If an entity is in unavailable state in HA, we expose this
as unreachable to Hue clients. This helps when troubleshooting
Hue issues because you can now receive feedback if there is an issue
on the HA side.
* Connect websocket when platforms ready, not when HA is ready
* Use callbacks from platform setup tasks instead
* Convert setup to async
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Connect websocket when platforms ready, not when HA is ready
* Use callbacks from platform setup tasks instead
* Convert setup to async
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* rename request to response, isort and black fixes
* Log exception details
* Add status code to success log, reformat log
* new syntax for response
* changed info to debug
* Add Flume Sensor
Add support for Flume API and sensor
* Add support for choosing timezone
Timezone is now a required option in configuration.yaml
* Add Flume to coveragerc and CODEOWNERS
Add flume to be ommited from testing. Add @ChrisMandich as Flume Code owner
* Revert "Add Flume to coveragerc and CODEOWNERS"
This reverts commit 0b27437a3b.
* Update manifest.json
Added Documentation URL for Flume to HASS.IO
* Update manifest.json
Added missing Newline at EOF.
* Update sensor.py
Update sensor to not required Device ID for configuration. Now loops through all available Type 2 devices and adds them as an entity.
* Update Manifest, CODEOWNERS, and manifest.json
Resolved errors related to code owners and requirements. Using hassfest and gen_requirements_all
* Update sensor.py
Implemented recommendations from @Quentame. Including time zone from Home Assistant, Updated variable names, and Consolidated duplicate functions.
* Implemented suggested changes from @Quentame
This includes: components name, using f-strings instead of concat, snake_case for variables, constants for the addition of future device types, clearer errors, and removed variables no longer in use.
* Update sensor.py
Restored unit_of_measurement. Updated return to "gal".
* Address pylint errors
* Update sensor.py
Include protected attributes in setup_platform.
* Address Pylint errors
homeassistant/components/flume/sensor.py:63:11: W0703: Catching too general exception Exception (broad-except)
homeassistant/components/flume/sensor.py:133:8: R1720: Unnecessary "else" after "raise" (no-else-raise)
homeassistant/components/flume/sensor.py:162:8: R1705: Unnecessary "else" after "return" (no-else-return)
homeassistant/components/flume/sensor.py:236:8: R1720: Unnecessary "else" after "raise" (no-else-raise)
* Update sensor.py
I'm okay with the broad exception clause.
homeassistant/components/flume/sensor.py:65:11: W0703: Catching too general exception Exception (broad-except)
* Update sensor.py
Add more specific exceptions for Try/Except.
* Update Flume Sensory.py
add requirements, exclude from tests, us pyflume pypi package.
* Update sensor.py to support latest pyflume package
* Update manifest
provide better flow of manifest and easier readibility.
* Update manifest.json
Reccomended by @balloob as it is already a core requirement
* Update sensor.py
Add proposed changes from @balloob
* Update requirements_all.txt
pytz is a core dependency, removing flume's requirement for it.
* Update sensor.py
Added @MartinHjelmare recommended changes.
* Update sensor.py
Resolving PyLint error
* Update sensor.py
Remove `KeyError`. Add length check for flume entity list before adding.
* Update sensor.py
* Update pyflume version
* Update imports with isort
* Add line break between standard library and thirdparty imports.
* Remove throttle from sensor.py
* Added the Proxmox VE integration
* Fixed code as described in PR #27315
* Fixed small linting error
* Fix code as described in PR #27315 code review
* Improve code as described in PR #27315
It is incorrect to return None as a result of proprety call because in such a case state_attr call will return None as well, which means "Unknown attribute".
Instead for preset_mode(s) PRESET_NONE constant should be used for consistency.
* Fix Synology camera whitelist
If whitelist config is set, not camera is added to HA at all.
* Fix Synology Camera whitelist
Fix typo in config key.
* Update camera.py
Access config dict the voluptuous way
* have sensor.moon use state dependent icons
Material design icons have icons for all sensor.states, let's use these natively in the component.
Based on the Season icons, tried to change accordingly.
* Update sensor.py
added state constants
* Update sensor.py
fixed missing mdi:
* order of constants. moon icons and use self.state
change order of constants to alphabetical, changed order in Moon_icons to alphabetical, used self.state for icon lookup
* replace the strings
replace the strings for self.state with the constants
* removed quotes
* removed spaces, empty line
* local Black
* Sort imports and move import to file header
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Add component VersaSense
* Updates based on review
* Changes based on review
* Fixed whitespace
* Fixed lines too long
* Fixed lines too long
* Formatted using black
* Added available property
* Set unavailable property appropriately
* Conversion to f-strings
* Load platform only once per platform
* Fixed duplicate identifiers across multiple devices
* Single call to async_add_entities during setup
* Removed unnecessary async/await syntax
* Added constants for key-value pairs
* Removed async/await syntax
* Added breaks in measurement check
* Added guard clause for discovery_info
* first version of new integration
* moved icon to shared consts
* added unit tests
* transformed from geolocation to sensor integration
* alert level is now the state of the sensor
* adopted unit tests
* fixed comment
* keep all sensors registered even if the feed update fails intermittently
* bumped version of upstream library
* bumped version of integration library
* regenerated requirements
* bumped version of integration library
* bumped version of integration library
* fixed generated file
* removed commented out code
* regenerated config flow file
* update to latest integration library version
* simplified code
* removed debug log statement
* simplified code structure
* defined constant
* use core interfaces
* moved test and fixture
* sorted imports
* simplified patching
* moved fixture to central config file
* Fix Synology camera whitelist
If whitelist config is set, not camera is added to HA at all.
* Fix Synology Camera whitelist
Fix typo in config key.
* Update camera.py
Access config dict the voluptuous way
* Fixed multi extruder/beds/chambers index issue, #28130
* Switched from .format to f style name formatting
* Fixed incorrect indexing
* Removed VS files
* Removed not need temp_id subtraction
* Removed VS files
* Fixed access mode
* Fixed access mode
* Fixing access mode - again
* Add bandit to pre-commit and CI, use to catch known vulnerable XML parsing
* Use defusedxml instead of direct xml.etree to parse XML
* Move config to tests/bandit.yaml
* Rework Comfoconnect sensor platform
* Sort ATTRS and fix icon
* Add unique_id to fan
* Use a different signal per sensor type
* Add more logging
* Swap to be sure.
* Remove -fan suffix from unique_id
* Remove malformed pylint disable markers
* Remove some unused imports
* Remove some unneeded lint exclusions
* Remove more unneeded lint exclusions
* Add specific codes to all noqa's
* Fixed multi extruder/beds/chambers index issue, #28130
* Switched from .format to f style name formatting
* Fixed incorrect indexing
* Removed VS files
* Removed not need temp_id subtraction
* Removed VS files
* Fixed access mode
* Fixed access mode
* Fixing access mode - again
* First commit
* First working release, but there's a lot to do
* Added support for preset_modes
* Refined logic
* Added translations for config_flow
* Updated translations
* modified: homeassistant/components/hisense_aehw4a1/climate.py
* modified: climate.py
* Updated library to latest version
* Small changes
* Null states when AC off
* Minor fixes
* Latest updates for TOX
* First commit
* First working release, but there's a lot to do
* new file: requirements_test_all.txt
* Added support for preset_modes
* Refined logic
* Added translations for config_flow
* Updated translations
* modified: homeassistant/components/hisense_aehw4a1/climate.py
* modified: climate.py
* Updated library to latest version
* Small changes
* Null states when AC off
* Minor fixes
* Latest updates for TOX
* new file: requirements_test_all.txt
* Fighting with tox
* vs Tox round 2
* Isort and updated requirements_test_all.txt
* Fighting with lint
* Implemented available state
* Changed exception type after Travis-ci pylint fails
* Support entry in configuration.yaml
* Removed commented code
* Switched to async
* Minor changes
* Updated library and fixed pylint errors
* Code optimization
* Implemented static ip addresses in configuration.yaml
* Reverted to existing constant
* Corrected pylint wrong-import-order
* Recovery from nuke event (messing all while rebase)
* Resolved Ci error
* Changes for PR
* Corrected temp scale for frontend
* Added test for config entry from configuration.yaml
* Updated dependency
* Check on manual config
* Imported custom exceptions and modified import config
* Optimized
* Change based on PR revision
* Added logging for failure event on manual config
* Tests added but to be corrected
* Edited tests
* Tests updated to ensure no I/O
* Working on tests
* Cheanges based on revision for PR
* Setting librey exception as direct side_effect in test
* Final changes for PR
* Redundand on command solved
* Improved AC logic
* bump home mitemp_bt to 0.0.3. It has an important bugfix for reading temperatures under 10 grade
* adjust the version number for mitemp_bt up to 0.0.3
* Start
* Lock init
* More stubbing
* Final pieces for PR
* Fixed incorrect property access
* Updaed .coveragerc
* Ensure we can handle unknown states
* Account for lock's offline property
* Account for device online
* Unload components concurrently
* Handle unknown states more gracefully
* Add config entry and device support to Demo
* Some more devices
* Fix tests using demo
* Review comments
* Update config_flow.py
* Revert
* Disable pylint
* Use travis_wait only with pylint
pylint is the only job that is expected to be silent for extended time.
For others such a silence is a sign of a problem and using travis_wait
just lengthens the wait, and makes things harder to follow and debug,
because it also suppresses output in the web UI.
* Use pytest-xdist in tox
Similarly as in Azure.
* add support for entity_id as state of entity
* add circular reference detection
* voluptuous instead of regex
* wait for EVENT_HOMEASSISTANT_START
* move delayed_sensor_update to async_added_to_hass
* add @callback decorator
* remove nested entity resolving
* Update Homekit climate.py to remap current mode
This update changes the mapping of Homekit's Current Mode Heating/Cooling State to show the HASS Hvac_action attribute as "idle" instead of "off" when the returned value is 0.
* Update climate.py
removed imported constant no longer being used (CURRENT_HVAC_OFF)
* corrected update to climate.py
trying again to remove unused constant.
* Update test_climate.py
* removed "change" comment
The added comment describing the change was not needed and should not be included, as it will already be described via "git annotate" (per @jc2k)
* Added bluesound speaker group attribute.
* Changed code to fix failing tests.
* Changed condition checking for empty group list.
* Investigating CI pipeline error
* Changed back to the code that passed CI earlier
* Changed condition on existence of list and sorting of bluesound_group
* Re-introduced guard on group_name None
* Update device_tracker.py
From time to time, Swisscom Internet Box fails to respond and this causes an exception, which is currently not handled by the code:
Traceback (most recent call last):
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/device_tracker/setup.py", line 164, in async_device_tracker_scan
found_devices = await scanner.async_scan_devices()
File "/usr/local/lib/python3.7/concurrent/futures/thread.py", line 57, in run
result = self.fn(*self.args, **self.kwargs)
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/swisscom/device_tracker.py", line 46, in scan_devices
self._update_info()
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/swisscom/device_tracker.py", line 67, in _update_info
data = self.get_swisscom_data()
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/swisscom/device_tracker.py", line 83, in get_swisscom_data
request = requests.post(url, headers=headers, data=data, timeout=10)
File "/srv/homeassistant/lib/python3.7/site-packages/requests/api.py", line 116, in post
return request('post', url, data=data, json=json, **kwargs)
File "/srv/homeassistant/lib/python3.7/site-packages/requests/api.py", line 60, in request
return session.request(method=method, url=url, **kwargs)
File "/srv/homeassistant/lib/python3.7/site-packages/requests/sessions.py", line 533, in request
resp = self.send(prep, **send_kwargs)
File "/srv/homeassistant/lib/python3.7/site-packages/requests/sessions.py", line 686, in send
r.content
File "/srv/homeassistant/lib/python3.7/site-packages/requests/models.py", line 828, in content
self._content = b''.join(self.iter_content(CONTENT_CHUNK_SIZE)) or b''
File "/srv/homeassistant/lib/python3.7/site-packages/requests/models.py", line 757, in generate
raise ConnectionError(e)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='192.168.1.1', port=80): Read timed out.
I've just added a try-except around the post.
* Update device_tracker.py
Addressed blank line issue reported by flake8
* Update device_tracker.py
Fixed alignment to be Black compliant.
* Update device_tracker.py
Fixed one more alignment issue
* Add support for Heat Mode detection for Heat Pumps - Fixes#26547
Since the ecobee component started to dynamically set the supported HVAC modes based on querying the device a few releases ago, users with Heat Pumps noticed that the Heat mode was no longer offered as an option by HA. Some of us did not actually notice until the summer was over :). This commit fixes that.
For heatpumps, ecobee returns:
'coolStages': 1,
'heatStages': 0,
'hasHeatPump': True,
Fix tested on HA 100.1 and 100.3
Fixes bug https://github.com/home-assistant/home-assistant/issues/26547
* changed line formatted with black
* Retrieve more detailed module infos
* Switch to using IDs
* Bump pyatmo version to 2.3.3
* Update requirements
* Undo the change of the unique id
* Rename variable
* Use friendly app names for Fire TV sources
* Remove debugging statement
* Tests pass
* Use 'blocking=True' to patch service calls
* Remove parentheses
* Add azure servicebus notify service
* files added to .coveragerc
* fix: import content type from const
* Moved imports to top level
* Code review fixes
+ added code owner
+ fixed config validation with has at least one
+ seperate attributes for dto to asb
* fixed doc link
* async setup instead of sync
* rename all the things
- removed too many ifs
* changed setup back to sync
+ comment about sync IO in lib
* More informative logging
* logging exception -> error
This release has a fix for a crash we were seeing occasionally, and a totally
revamped packet handler which should be more robust and CPU-efficient.
Fixes#25887
* Add WLED integration
* Use f-string for uniq id in sensor platform
* Typing improvements
* Removes sensor & light platform
* Remove PARALLEL_UPDATES from integration level
* Correct type in code comment 'themselves'
* Use async_track_time_interval in async context
* Remove stale code
* Remove decorator from Flow handler
* Remove unused __init__ from config flow
* Move show form methods to sync
* Only wrap lines that can raise in try except block
* Remove domain and platform from uniq id
* Wrap light state in bool object in is_on method
* Use async_schedule_update_ha_state in async context
* Return empty dict in device state attributes instead of None
* Remove unneeded setdefault call in setup entry
* Cancel update timer on entry unload
* Restructure config flow code
* Adjust tests for new uniq id
* Correct typo AdGuard Home -> WLED in config flow file comment
* Convert internal package imports to be relative
* Reformat JSON files with Prettier
* Improve tests based on review comments
* Add test for zeroconf when no data is provided
* Cleanup and extended tests
* ViCare: Handle exceptions from PyViCare library (#28072)
Sometimes Viessmann server failures or other connection problems may
lead to exceptions thrown when updating data.
This commit handles those exceptions with some error logging and
makes sure that the component does not break completely in that case.
* Remove unneeded returns
* Remove unneeded returns
* Netatmo camera : Implement turn_on and turn_off methods.
* Netatmo camera : Implement turn_on and turn_off methods.
* Netatmo camera : Implement turn_on and turn_off methods.
* Netatmo camera : Implement turn_on and turn_off methods.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Netatmo camera : Implement enable_motion_detection(), disable_motion_detection() operations.
* Add Presence Netatmo Camera services (set_light_auto, set_light_on, set_light_off) to control its internal flood light status.
* Add Presence Netatmo Camera services (set_light_auto, set_light_on, set_light_off) to control its internal flood light status.
* Netatmo camera : Use new style string formatting.
* Make the file compliant with flake8 linter.
* Make the file compliant with flake8 linter.
* Make it compliant with black formatter.
* Make it compliant with black formatter.
* Bug fix : Flood light control was not working with VPN url.
* Adjust font text such that it won't be drawn inside the bow line in image_processing.draw_box
* Adjust font_height after actually counting the pixels
* Thinned out line_width and adjusted font size
* Fix for occupancy sensor unique_id
* Add check for sensor attributes before adding entity
* Fixes temperature key issue
* Clean up code with better use of keys
* Code clean up
* Support Huawei LTE SSDP discovery
* Avoid KeyError on simultaneous user initiated flow
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Format code
* Add already configured check
* Initialize context in test flows
* Move deviceType match to manifest
* Update generated.ssdp
* Add SSDP config flow test case
* Remove stale debug print from tests
Set auto mode should be exposed to all dyson fans (e.g. *Pure Cool Link* and *Pure Hot+Cool Link*) instead of only *Pure Cool*, as it is support in all of the models (i.e. similar to the set night mode).
* docs(ifttt): add information to services.yaml
* docs(ifttt): start examples lowercase
* docs(ifttt): start examples with capital letter
* docs(ifttt): end description on period
* Update Vivotek component
Fix building stream URL
* Update Vivotek component
Make stream path optionally configurable.
* Update Vivotek camera integration
Use f-string to build stream source URL.
This improve readability and I hear it runs faster.
* SSDP matching improvements
- support multiple match groups per domain
- require matches on all, not any item in a group
- support matching on all UPnP device description data
* Manifest structure fixes
This change addresses a bug where one is unable to change directly between the away and temperature hold presets, as temperature hold cannot be enabled on a Venstar thermostat if away mode is active.
Furthermore, this change removes redundant state checks as the set_away and set_schedule calls are idempotent in the venstarcolortouch library. See https://github.com/hpeyerl/venstar_colortouch/blob/master/src/venstarcolortouch/venstarcolortouch.py#L275.
* Prevent TypeError when KNX RGB(W) light value contains None.
* Pylint doesn't like 'w' as variable name, therefore using 'white' instead.
* Simplified code as suggested by pvizeli.
* Prevent TypeError when KNX RGB(W) light value contains None.
* Pylint doesn't like 'w' as variable name, therefore using 'white' instead.
* Simplified code as suggested by pvizeli.
The new release fixes a single regression from requests to aiohttp conversion.
Some devices do not respond with the correct mimetype which was not enforced
by requests but is enforced by aiohttp.
Related PR https://github.com/rytilahti/python-songpal/pull/59
* Imported homeassistant.util and slugified address if no name is specified
* Added a custom validator function in case name is not set in config
* Removed logger.debug line only used for testing
* Imported homeassistant.util and slugified address if no name is specified
* Added a custom validator function in case name is not set in config
* Removed logger.debug line only used for testing
* Clean up Xiaomi Air Quality Monitor support (cgllc.airmonitor.b1)
* Remove unused variable
* Provide a proper unique_id
* Incorporate review
* Wrap the method that cause the exception
* Undo mistakenly changed file. Fixed in the separate PR.
* convert keyboard_remote to async and add possibility to trigger on multiple event types, as well as emulate key hold events
* update requirements
* cleanup shutdown handling and config handling as well as address other minor comments
* cleanup unused return values and debug message formatting
* move start and stop event listen to separate coroutine plus minor cleanup
* make setup coroutine a function
* fix import order and attribute defined outside of init
* add to codeowners
* update codeowners
* Add and improve core and config_entries type hints
* Complete and improve config_entries type hints
* More entity registry type hints
* Complete helpers.event type hints
* Reorg and test attribute for HomematicIP Cloud
* Add dutyCycle check to security_group
* Edit test to improve coverage
* Add missing flow test
* apply suggestion
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* fix assert condition
* Added Unifi Led
* fixed manifest
* fixed style issue
* removed unused setting
* added sugested changes.
* fixed order
* fixed settings that are required
* Fix review issues
* fix variable name that was too short
* Testing something
* Reverted to a previous version for testing
* Reverted testing changes.
* Add available status and increase version of unifiled package version.
* No io in init function.
* Add above and below to sensor condition extra_fields
* Change unit_of_measurement to suffix in extra_fields
* Check if sensor has unit when getting capabilities
* Improve tests
* Update ThermostatController to map directives to supported modes and add support for CUSTOM mode.
* Removed erroneous config value from test.
* Removed unnecessary use of a comprehension by dumbing down comment so pylint could comprehend.
* Removed erroneous import variable caused by removing erroneous config value from test.
* Removed unnecessary use of a comprehension.
* Reverted Removal or erroneous import variable and erroneous config value from test.
Apparently need for additional tests outside this component. Whoops.
* Update pycsspeechtts
From 1.0.2 to 1.0.3 as the old one is using an api that doesn't work
* Give a option to choose region
Api is now region dependent, so gave it a config
* Save client identifier from auth for future use
* Use websocket events to update Plex
* Handle websocket disconnections
* Use aiohttp, shut down socket cleanly
* Bad rebase fix
* Don't connect websocket during config_flow validation, fix tests
* Move websocket handling to external library
* Close websocket session on HA stop
* Use external library, revert unnecessary test change
* Async & lint fixes
* Clean up websocket stopper on entry unload
* Setup websocket in component, pass actual needed object to library
* added automatic protocol detection
* fix logger tests
* fix async tests
* add missin const.py
* fix log formatting
* wait for first update call
* migrate first tests
* migrated all test functions
* started to use state machine
* updated all tests to use async_setup_component
* slove hints
* update tests
* get state at correct position
* remove impossible tests
* fix autodetect tests
* use caplog fixture
* add test for duplicate
* catch concrete exceptions
* don't mock samsungctl exceptions
* add test for discovery
* get state when possible
* add test for autodetect without connection
* Using latest winthings_api module.
Drastically reduced complexity of tests.
* Removing import source.
* Fixing test requirements.
* Using requests_mock instead of responses module.
* Updating file formatting.
* Removing unused method.
* Adding support for new OAuth2 config flow.
* Addressing PR feedback.
Removing unecessary base_url from config, this is a potential breaking change.
* Addressing PR feedback.
* Modernization rework
- config entry support, with override support from huawei_lte platform in YAML
- device tracker entity registry support
- refactor for easier addition of more features
- internal code cleanups
* Remove log level dependent subscription/data debug hack
No longer needed, because pretty much all keys from supported
categories are exposed as sensors.
Closes https://github.com/home-assistant/home-assistant/issues/23819
* Upgrade huawei-lte-api to 1.4.1
https://github.com/Salamek/huawei-lte-api/releases
* Add support for access without username and password
* Use subclass init instead of config_entries.HANDLERS
* Update huawei-lte-api to 1.4.3 (#27269)
* Convert device state attributes to snake_case
* Simplify scanner entity initialization
* Remove not needed hass reference from Router
* Return explicit None from unsupported old device tracker setup
* Mark unknown connection errors during config as such
* Drop some dead config flow code
* Run config flow sync I/O in executor
* Parametrize config flow login error tests
* Forward entry unload to platforms
* Async/sync fixups
* Improve data subscription debug logging
* Implement on the fly add of new and tracking of seen device tracker entities
* Handle device tracker entry unload cleanup in component
* Remove unnecessary _async_setup_lte, just have code in async_setup_entry
* Remove time tracker on unload
* Fix to not use same mutable default subscription set for all routers
* Pylint fixes
* Remove some redundant defensive device tracker code
* Add back explicit get_scanner None return, hush pylint
* Adjust approach to set system_options on entry create
* Enable some sensors on first add instead of disabling everything
* Fix SMS notification recipients default value
* Add option to skip new device tracker entities
* Fix SMS notification recipient option default
* Work around https://github.com/PyCQA/pylint/issues/3202
* Remove unrelated type hint additions
* Change async_add_new_entities to a regular function
* Remove option to disable polling for new device tracker entries
* Added Unifi Led
* fixed manifest
* fixed style issue
* removed unused setting
* added sugested changes.
* fixed order
* fixed settings that are required
* Fix review issues
* fix variable name that was too short
* Testing something
* Reverted to a previous version for testing
* Reverted testing changes.
* cover all possible values for operation_mode
* Update climate.py
* Update climate.py
* Update climate.py
mapped homeassistant constants to client ones so we don't have to check for both
* black + pylint
* move mode_map to __init__()
* Update climate.py
* Update climate.py
The new release fixes a single regression from requests to aiohttp conversion.
Some devices do not respond with the correct mimetype which was not enforced
by requests but is enforced by aiohttp.
Related PR https://github.com/rytilahti/python-songpal/pull/59
<!-- What is breaking and why we have to break it. Remove this section only if it was NOT a breaking change. -->
## Description:
<!--
You are amazing! Thanks for contributing to our project!
Please, DO NOT DELETE ANY TEXT from this template! (unless instructed).
-->
## Breaking change
<!--
If your PR contains a breaking change for existing users, it is important
to tell them what breaks, how to make it work again and why we did this.
This piece of text is published with the release notes, so it helps if you
write it towards our users, not us.
Note: Remove this section if this PR is NOT a breaking change.
-->
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
## Proposed change
<!--
Describe the big picture of your changes here to communicate to the
maintainers why we should accept this pull request. If it fixes a bug
or resolves a feature request, be sure to link to that issue in the
additional information section.
-->
**Pull request with documentation for [home-assistant.io](https://github.com/home-assistant/home-assistant.io) (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
## Type of change
<!--
What type of change does your PR introduce to Home Assistant?
NOTE: Please, check only 1! box!
If your PR requires multiple boxes to be checked, you'll most likely need to
split it into multiple PRs. This makes things easier and faster to code review.
-->
- [ ] Dependency upgrade
- [ ] Bugfix (non-breaking change which fixes an issue)
- [ ] New integration (thank you!)
- [ ] New feature (which adds functionality to an existing integration)
- [ ] Code quality improvements to existing code or addition of tests
## Example entry for `configuration.yaml`:
<!--
Supplying a configuration snippet, makes it easier for a maintainer to test
your PR. Furthermore, for new integrations, it gives an impression of how
the configuration would look like.
Note: Remove this section if this PR does not have an example entry.
-->
```yaml
# Example configuration.yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
## Additional information
<!--
Details are important, and help maintainers processing your PR.
Please be sure to fill out additional details, if applicable.
-->
- This PR fixes or closes issue: fixes #
- This PR is related to issue:
- Link to documentation pull request:
## Checklist
<!--
Put an `x` in the boxes that apply. You can also fill these out after
creating the PR. If you're unsure about any of them, don't hesitate to ask.
We're here to help! This is simply a reminder of what we are going to look
for before merging your code.
-->
- [ ] The code change is tested and works locally.
- [ ] Local tests pass. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
- [ ] The code has been formatted using Black (`black --fast homeassistant tests`)
- [ ] Tests have been added to verify that the new code works.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
- [ ] Documentation added/updated for [www.home-assistant.io][docs-repository]
If the code communicates with devices, web services, or third-party tools:
- [ ] [_The manifest file_][manifest-docs] has all fields filled out correctly. Update and include derived files by running `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `python3 -m script.gen_requirements_all`.
- [ ] Untested files have been added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
- [ ] The [manifest file][manifest-docs] has all fields filled out correctly.
Updated and included derived files by running: `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt`.
Updated by running `python3 -m script.gen_requirements_all`.
- [ ] Untested files have been added to `.coveragerc`.
The integration reached or maintains the following [Integration Quality Scale][quality-scale]:
<!--
The Integration Quality Scale scores an integration on the code quality
and user experience. Each level of the quality scale consists of a list
of requirements. We highly recommend getting your integration scored!
@@ -4,7 +4,7 @@ Everybody is invited and welcome to contribute to Home Assistant. There is a lot
The process is straight-forward.
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/guide/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0)
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/guide/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0 and 1)
- Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
- Write the code for your device, notification service, sensor, or IoT thing.
- Ensure tests work.
@@ -12,3 +12,7 @@ The process is straight-forward.
Still interested? Then you should take a peek at the [developer documentation](https://developers.home-assistant.io/) to get more details.
## Feature suggestions
If you want to suggest a new feature for Home Assistant (e.g., new integrations), please open a thread in our [Community Forum: Feature Requests](https://community.home-assistant.io/c/feature-requests).
We use [GitHub for tracking issues](https://github.com/home-assistant/home-assistant/issues), not for tracking feature requests.
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
To get started:
..code::bash
python3 -m pip install homeassistant
hass --open-ui
Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
Check out `home-assistant.io <https://home-assistant.io>`__ for `a
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Paulus Schoutsen
Pascal Vizeli
ochlocracy
J. Nick Koston
jan iversen
Raman Gupta
Anders Melchiorsen
Bas Nijholt
Daniel Høyer Iversen
Fredrik Erlandsson
Aaron Bach
Chris Talkington
Franck Nijhof
Jason Swails
James Nimmo
Robert Svensson
Kevin Eifinger
David F. Mulcahey
Knapoc
Minims
Carlos Gustavo Sarmiento
Kit Klein
jan iversen
Bram Kragten
On Freund
Lennart Henke
jjlawren
Alexei Chetroi
danbishop
springstan
Franck Nijhof
Ziv
Erik Montnemery
Jc2k
Maciej Bieniek
Fabian Affolter
Eugenio Panadero
ollo69
Martin Hjelmare
AJ Schmidt
cgtobi
Jonathan Keljo
HomeAssistant Azure
Ron Klinkien
Chris Caron
Jeff McGehee
Marcel Steinbach
Balazs Sandor
evoblicec
da-anda
Santobert
vwir
Malte Franken
Anders Liljekvist
SukramJ
tiagofreire-pt
bangom
Colin Harrington
Austin Mroczek
Richard de Boer
shred86
Hans Oischinger
Adam Michaleski
David F. Mulcahey
Jaryl Chng
Kris Bennett
Diogo Gomes
brefra
Pascal Vizeli
Balazs Keresztury
Patryk
roleo
Josef Schlehofer
Oliver
MeIchthys
Oxan van Leeuwen
elmurato
J. Nick Koston
jasperro
Vegetto
Olivier B
Alan Tse
Ivan Dyedov
Matt Snyder
Quentame
Christian Ferbar
guillempages
escoand
Ville Skyttä
Jonas Kohlbrenner
GaryOkie
Steven Rollason
Phil Bruckner
Robin
tetienne
Maikel Punie
MatthewFlamm
Miroslav Ždrale
Bendik Brenne
Daniel Shokouhi
Rami Mosleh
brubaked
Jason Lachowsky
Paolo Tuninetto
sbilly
Tom Harris
David Bonnes
Greg
Aidan Timson
Steven Looman
Slava
Dave Pearce
Andre Lengwenus
smega
Barry Williams
Emilv2
chiefdragon
Florian Werner
Penny Wood
Paul Madden
Gerard
Vilppu Vuorinen
Michaël Arnauts
Paul Enright
Robert Chmielowiec
Georgi Gardev
Thomas Hollstegge
marengaz
David Nielsen
lewei50
Mans Matulewicz
Dave T
jey burrows
seanvictory
Ivan Belokobylskiy
Tom Schneider
olijouve
z0p
Philipp Schmitt
Achilleas Pipinellis
Jeff Irion
mezz64
kuchel77
Colin Robbins
Sébastien RAMAGE
Tim van Cann
Marius
Diogo Gomes
Petro31
dupondje
Jens Nistler
Yuki Ueda
Jenny
Ruslan Sayfutdinov
paolog89
Tom
Mike
Colin O'Dell
Rocik
Pierre
Martin Long
jezcooke
michaeldavie
Alok Saboo
Patrick Kishino
Robbie Trencheny
Tsvi Mostovicz
Mark Coombes
Daniel Perna
SukramJ
Vladimír Záhradník
Tom Harris
Markus Pöschl
ktnrg45
Victor Guimarães
mueslo
Laszlo Jakab
Squixx
Jardi Martinez
Marco
Joseph Albert
Philip Rosenberg-Watt
Moshe Kaplan
Massimiliano Cannarozzo
Abílio Costa
MrDadoo
Jens Østergaard Nielsen
Emanuel Winblad
Vladimír Záhradník
Victor Vostrikov
SoftXperience
Eduard van Valkenburg
Ben
Jonathan Østrup
crallian
Josh Anderson
Bruno Furtado
CHAZICLE
Yarmo Mackenbach
melyux
Josh Bendavid
Dougal Matthews
P-Verbrugge
Andrew
etheralm
quthla
Kasper Kirkegaard
Konsts
Vincent Le Bourlot
Martin
akasma74
FrengerH
Jean-Paul van Ravensberg
Gerben ten Hove
Björn Orri
Arjan van Balken
Bernhard B
Frank van Ierland
Dan Lehman
Johann Kellerman
Malachi Soord
Christian Clauss
endor
Rick
Matthew Treinish
Thibault Maekelbergh
Rafał Słota
Thomas
Matthias Alphart
Bouwe Westerdijk
John Hollowell
Oscar Calvo
Paul Daumlechner
aaska
Rohan Kapoor
starkillerOG
finnysamuel
Bill Durr
Michael Dokolin
Desausoi Laurent
uvjustin
mindigmarton
James Hilliard
thoscut
Leon Knauer
Jens
Joe Gross
zhumuht
steve-gombos
Jan De Luyck
Ronald Dehuysser
Faucogney Anthony
ajmarks
Joakim Sørensen
Peter Nijssen
Per-Øyvind Bruun
Rick van Hattem
Tim Rightnour
Akın Ömeroğlu
Bas Delfos
zewelor
Bogdan Vlaicu
Martin Hjelmare
inputd
Robert Van Gorkom
Jörg Thalheim
NobleKangaroo
Nathan
Daniel Lashua
Davide Varricchio
Nikolay Vasilchuk
William Sutton
Olen
Watchfox
Alistair Galbraith
Mariano Faraco
mohmacht
fwestenberg
Ernst Klamer
Sascha Kühndel
Aleix Murtra
Casper
Colin Frei
Jason Ross
Eleftherios Chamakiotis
Trekky12
Markus Nigbur
rccoleman
Alexxander0
Andrew Sayre
Gido
Joakim Plate
David Cramer
Marcelo Moreira de Mello
Sérgio
David K
Ian Duffy
Stefan Agner
Josh Bendavid
Aaron David Schneider
Lars-P
Iulius
Christian
Shawn Wilsher
rhadamantys
Steven Barth
Issac
Tais Hedegaard Holland
Andy Grunwald
François
LE LAY Olivier
Felix Barbalet
Kerwood
Paul Annekov
Kevin McCormack
Niall Donegan
Claudio Heckler
Philipp Danner
gppanayotov
Fazli Sapuan
Wim Haanstra
omriasta
Yuchen Ying
Andrew Onyshchuk
Chris Mandich
Justin Bassett
Erik Kastelec
Andre Richter
Emacee
Louis-Dominique Dubeau
Ryan
Aaron Godfrey
Tyler
DjMoren
Sebastian Muszynski
randellhodges
John Luetke
foxy82
Tiit Rätsep
proferabg
Brett T. Warden
Ian
Bruno Filipe
gjbadros
Bernhard B
Gerald Hansen
Sören Beye
SNoof85
Andrew McRae
butako
1v0dev
Martin Rowan
orrpan
Heine Furubotten
Luca Angemi
Andy Loughran
Alain Turbide
Felipe Martins Diel
Andreas Oberritter
Dan Jones
mvn23
Tom Brien
Evgeny
Alex van den Hoogen
sophof
rappenze
Matthew Donoughe
Hmmbob
Austin Drummond
Tim McCormick
Shulyaka
Emeric
Adam Cheng
Dmitry Krasnoukhov
Pedro Lamas
Gil Peeters
Jacob McSwain
majuss
fredericvl
Otto Winter
Chris Halls
Andrey Kupreychik
Jesse Hills
Tomasz
Jonas
Tobias Perschon
awkwardDuck
kurniawan77
Per Sandström
Andi
Michael Hansen
Steven Impens
Jackie Yang
Michaël Arnauts
LeoCal
Morten Trab
Tyler Page
Brendon Baumgartner
Paul Romkes
Guillermo Ruffino
Jay Newstrom
Jordan Speicher
bouni
Tommy Larsson
Lado Kumsiashvili
Thomas Germain
Thomas
Federico Leoni
Kevin Lee
Teemu R
Jon Gilmore
bluestripe
Ari
Tim Gates
Franck Nijhof
ssenart
Kevin Köck
temeteke
Zach
Grodesh
Marius Flage
Thom Troy
kennedyshead
Martin
chriscla
Charles Garwood
Jess
Luca Zimmermann
Oscar Tin Lai
Jonas Janz
Tobias Efinger
Florent Thoumie
Tom Robinson
András Rutkai
Nash Kaminski
Robin Pronk
Mister Wil
phispi
Michael Schoonmaker
Daniyar Yeralin
gngj
Steve M
ZiroNL
Renaud Martinet
Jonas Janz
Yann Jajkiewicz
Eliseo Martelli
Sören
J.P. Hutchins
Floris Van der krieken
Hayley McIldoon
Diefferson Koderer Môro
Floris Van der krieken
