* fix bug when search for string in dict fails when dict is null
* another bug fix that I only noticed because of this other bug
* add test to cover failure scenario
* update docstring
* add additional assertions to cover failure scenario that's being fixed
Sometimes a modbus server do not respond to a transaction,
this is a contradiction to the modbus protocol specification,
but merely a matter of fact.
Use asynio.await_for() to provoke a timeout, and close the
transaction.
* Speed up TP-Link lights
* Color temp kan be None
* hs as int, force color temp=0
* Fix color temp?
* Additional tplink cleanups to reduce api calls
* Update test to return state, remove Throttle
* Fix state restore on off/on
* Fix lights without hue/sat
Co-authored-by: J. Nick Koston <nick@koston.org>
* replaced MagicMock with CoroutineMock to avoid exception
* added conversion to str so mock returns unique-id that doesn't throw json exception
* added non-empty config since hass throws exception when config is empty
* Skip parsing session if incomplete
* Schedule an update if session data is incomplete
* Mark as callback
* Remove update() & convert to async, abort if any session is incomplete
* Handle race condition in harmony setup
If the remote was discovered via ssdp before the yaml config import
happened, the unique id would already be set and the import
would abort.
* Update homeassistant/components/harmony/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* reduce
* black
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Debounce calls to Plex server
* Simplify debounce by recommendation
* Update tests to handle debounce
* Test debouncer, fix & optimize tests
* Use property instead
When placeholders are in use, flow_title needs to be
set in the json to prevent an empty name in the
integrations dashboard. This affected doorbirds
that were found via ssdp.
* Switch homekit lights to use service callbacks
Service callbacks allow us to get the on/off, brightness, etc
all in one call so we remove all the complexity that was
previously needed to handle the out of sync states
We now get the on event and brightness event at the same time
which allows us to prevent lights from flashing up to 100%
before the requested brightness.
* Fix STATE_OFF -> STATE_ON,brightness:0
If the harmony hub was not ready for connection or
was busy when importing from yaml, the import validation
would fail would not be retried.
To mitigate this scenario we now do the validation in
async_setup_platform which allows us to raise
PlatformNotReady so we can retry later.
* Handle unavailabe entities
* Remove some logging
* Set valve to lowest temp when turned off
* Remove some logging
* Address comments
* Report entity as connected if update is successful
* Fix stupidness
* Fix
* Store device_registry entry id in HueEvent
so it can be retrieved with that key when using device triggers
* Add device_trigger for hue_event from hue remotes
* supporting Hue dimmer switch & Hue Tap
* State mapping and strings are copied from deCONZ
* refactor mock_bridge for hue tests
and also share `setup_bridge_for_sensors`
for test_sensor_base and test_device_trigger.
* Add tests for device triggers with hue remotes
* Remove some triggers
* replace asyncio.wait with asyncio.gather since wait ignores exceptions
fix for test_entity_platform so it expects the exception
* changed to log on failed domains
* discovered that this fix actually removes other uncaught exceptions
* fix in the list of ignored exceptions
* replaced a few ignores on dyson tests that work locally but fail in the CI
* two more tests that are failing on the CI and not locally
* removed assertion on multiple entries with same unique_id - replaced with log and return
reverted test_entity_platform to its original since now there is no exception thrown
* entered all the dyson tests. they all pass locally and probabilistically fail in the CI
* removed unnecessary str() for exception
* added log message for duplicate entity_id / unique_id
* removed log in case of False return value
* added exc_info
* change the use of exc_info
* Convert nut to config flow
* Add a test for importing
* lint
* Address review items (part 1)
* Address review items (part 1)
* Cleanup unique id handling
* Update tests for new naming scheme
* No unique id, no device_info
* Remove sensor types
* Update tests to use resources that still exist
* Fix setting zone overlays for tados that support swing
* Support for changing swing mode will come at a later
time as another upstream update is required.
* remove debug
* style
* The api reports success before the state change
takes effect
* We now set state optimistically and followup with
an update 4 seconds in the future after any state change to
verify it actually happens.
* When hvac_mode is passed to the set_temperature service
we now switch to the desired mode.
* Add remote platform to hue integration
supporting ZGPSwitch, ZLLSwitch and ZLLRotary switches.
* Ported from custom component Hue-remotes-HASS from @robmarkcole
* Add options flow for hue, to toggle handling of sensors and remotes
* Sensors are enabled by default, and remotes are disabled,
to not generate any breaking change for existent users.
Also, when linking a new bridge these defaults are used,
so unless going explicitly to the Options menu,
the old behavior is preserved.
* SensorManager stores the enabled platforms and ignores everything else.
* Bridge is created with flags for `add_sensors` and `add_remotes`,
and uses them to forward entry setup to only the enabled platforms.
* Update listener removes disabled kinds of devices when options are changed,
so device list is in sync with options, and disabled kinds disappear from HA,
leaving the enable/disable entity option for individual devices.
* Fix hue bridge mock with new parameters
* Revert changes in hue bridge mock
* Remove OptionsFlow and platform flags
* Extract `GenericHueDevice` from `GenericHueSensor`
to use it as base class for all hue devices, including those without any entity,
like remotes without battery.
* Add `HueBattery` sensor for battery powered remotes
and generate entities for TYPE_ZLL_ROTARY and TYPE_ZLL_SWITCH remotes.
* Remove remote platform
* Add HueEvent class to fire events for button presses
* Use `sensor.lastupdated` string to control state changes
* Event data includes:
- "id", as pretty name of the remote
- "unique_id" of the remote device
- "event", with the raw code of the pressed button
('buttonevent' or 'rotaryevent' property)
- "last_updated", with the bridge timestamp for the button press
* Register ZGP_SWITCH, ZLL_SWITCH, ZLL_ROTARY remotes
* fix removal
* Exclude W0611
* Extract GenericHueDevice to its own module
and solve import tree, also fixing lint in CI
* Store registered events to do not repeat device reg
* Minor cleaning
* Add tests for hue_event and battery entities for hue remotes
* Best effort state initialization of bayesian binary sensor.
Why:
* https://github.com/home-assistant/home-assistant/issues/30119
This change addresses the need by:
* Running the main update logic eagerly for each entity being observed
on `async_added_to_hass`.
* Test of the new behavior.
* Refactor in order to reduce number of methods with side effects that
mutate instance attributes.
* Improve test coverage
Why:
* Because for some reason my commits decreased test coverage.
This change addresses the need by:
* Adding coverage for the case where a device returns `STATE_UNKNOWN`
* Adding coverage for configurations with templates
* rebase and ensure upstream tests passed
* Delete commented code from addressing merge conflict.
* Add HomeKit support for slat tilting
* Reset tilt-specific attribute, not position attribute
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add explanation why we fix HomeKit's targets
We have to assume that the device has worse precision than HomeKit. If it
reports back a state that is only _close_ to HK's requested state, we'll
"fix" what HomeKit requested so that it won't appear out of sync.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Create __init__.py
* Create manifest.json
* Update zeroconf.py
* more work on integration
* more work on integration.
* add more sensor tests.
* Update const.py
* Update sensor.py
* more work on ipp.
* Update test_config_flow.py
* more work on ipp.
* Update config_flow.py
* Update config_flow.py
* Update Meteo_France Weather constants
Updating Meteo_France integration with more weather "condition" returned by the web service.
Adding:
- "Nuit claire" (note the lower 'c') mapped to "clear-night"
- "Brume" mapped to "fog"
* Black formatting update
* add services for DSP
* add homeassistant/components/kef/const.py
* add services.yaml
* fix set_mode
* fix services
* media_player.py fixes
* bump aiokef to 0.2.9
* update requirements_all.txt
* add basic sensor.py
* add DSP settings as attributes
* add message about kef.update_dsp
* remove sensor.py
* fix pylint issues
* update_dsp inside async_added_to_hass
* use {...} instead of dict(...)
* get DSP settings when connecting to HA or once on update
* simplify condition
* do not get mode twice
* remove async_added_to_hass
* use async_register_entity_service
* remove entity_id from schema and prepend _value
* invalidate self._dsp after setting a DSP setting
* schedule update_dsp every hour
* subscribe and unsubscribe on adding and removing to HA
* don't pass hass and set _update_dsp_task_remover to None after removing
* add third stage to hass shutdown
* use 3rd stage in storage
* update core state
* add writing data to multi stop ignore
* update core test
* review comment
* update name based on feedback
* Add include_location_attributes
* Add check for different state
* Fix things
* Drop filter
* significant changes only
* Change default behavior
* Remove trailing commas
* Tado climate state moved to python-tado
* Resolve various incorrect states and add tests for known tado zone states
* Write state instead of calling for an update
This is a redux of pr #32564 with all of the zone state now moved into
python-tado and tests added for the various states.
* stale string
* add missing undos to dispachers
* remove unneeded hass
* naming
* rearrange
* fix water heater, add test
* fix water heater, add test
* switch hvac mode when changing temp if in auto/off/smart
* add test to for importing multiple output settings
* provide option to set multiple output states
* tweaks after testing
* Update homeassistant/components/konnected/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Prevent nut from doing I/O in the event loop
device_state_attributes would call for an update if the
throttle happened to expire.
* _format_display_state no self use
* Modbus: remove legacy code
flexit and stiebel_el are updated to import modbus.const,
therefore legacy code can be removed.
* Flexit: update const reference from modbus
climate.py imports from modbus direct, this is legacy and will
result in errors.
update import to be modbus.const.
* Stiebel_el: update reference to modbus
__init.py references modbus directly, this is legacy and will
give errors.
Update import to be modbus.const.
* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
* Plum Lightpad - glowIntensity is represented as a float/percentage
Calculate brightness from the glowIntensity instead of the glowIntensity from brightness.
* Renamed `_glowIntensity` to `_glow_intensity`
* Added Rounding, converting to an int, min and max boxing
* Added codeowners to the Plum Lightpad manifest.json
This upgrades to PyVicare 0.1.10 which allows to combine multiple
requests into a single HTTP GET. This in turn allows us to increase
the scan_interval to 60 seconds by default.
Additionally scan_interval has been introduced as a config parameter.
When in run schedule mode, setting the temperature will switch
the device to a temporary hold. If you set the temperature
again, we should stay in temporary hold mode and not switch
to permanent hold.
The underlying nuheat package contains a default to a
permanent hold if no setting was passed. We now always
pass the setting.
* Implement Alexa.CameraStreamController.
* Add dependencies.
* Add camera helpers for image url, and mjpeg url.
* Remove unsupported AlexaPowerController from cameras.
* Refactor camera_stream_url to hass_url
* Declare HLS instead of RTSP.
* Add test for async_get_image_url() and async_get_mpeg_stream_url().
* Sort imports.
* Fix camera.options to camera.stream_options. (#32767)
(cherry picked from commit 9af95e8577)
* Remove URL configuration option for AlexaCameraStreamController.
* Update test_initialize_camera_stream.
* Optimize camera stream configuration.
* Update Tests for optimized camera stream configuration.
* Sort imports.
* Add check for Stream integration.
* Checks and Balances.
* Remove unnecessary camera helpers.
* Return None instead of empty list for camera_stream_configurations().
In PR#24804 the step size was changed to match the step size
of the device that HomeKit is controlling. Since HomeKit
is always working in TEMP_CELSIUS and the step size is based on
the Home Assistant units setting, we were mixing data with different
units of measure when Home Assistant was using imperial units.
This regression presented the symptom that setting the
temperature to 73F would result in 74F. Other values are affected
where the math doesn't happen to work out.
HomeKit currently has a default of 0.1 in the spec and the override
of this value has been removed.
* Config flow for elkm1
* As entity ids can now be changed, the “alarm_control_panel”
attribute “changed_by_entity_id” is now “changed_by_keypad”
and will show the name of the Elk keypad instead of the entity id.
* An auto configure mode has been introduced which avoids the
need to setup the complex include and exclude filters. This
functionality still exists when configuring from yaml for power
users who want more control over which entities elkm1 generates.
* restore _has_all_unique_prefixes
* preserve legacy behavior of creating alarm_control_panels that have no linked keypads when auto_configure is False
* unroll loop
* Add integration for Schluter
New integration for Schluter DITRA-HEAT thermostats. Interacts with Schluter API via py-schluter to implement climate platform.
* Fix for manifest issue on build
Removed unnecessary configurator logic
* Flake8 & ISort issues fixed
* Code review modifications for Schluter integration
- Removed unnecessary strings.json file
- Removed unnecessary DEFAULT_SCAN_INTERVAL from __init__.py
- Removed persistent notification for authentication error in __init__.py
- Removed string casts from log statements in __init__.py
- Removed unnecessary logging of entity creations in climate.py
- Removed unnecessary lookup for hvac_mode in climate.py
* Work started on Update Coordinator
* Further Coordinator work
* Update to DataUpdateCoordinator complete
* Flake8 fix
* Removal of unnecessary SchluterPlatformData
Coordinator also now using SCAN_INTERVAL
* Disable polling, use coordinator listeners
* Isort on climate.py
* Code review modifications
- Hass data stored under domain
- Since platform only likely to be climate, removed array, load explicitly
- Remove unnecessary fan mode implementation
* Switch to HVAC action for showing current heating status
* Isort fix
* HVAC Mode return list, set_hvac_mode function added
* __init__.py modifications from code review
* Climate.py code review modifications
- Device info property removed
- Write state function on set temp failure
- Add "available" property
- Delegate sync function in coordinator update to the executor
* Serial number as unique identifier
- Now using serial number & thermostat dictionary to protect against scenarios where a device is removed and enumerable index is no longer accurate
- Removed async_write_ha_state() from set temp exception, not needed
- Removed unnecessary SCAN_INTERVAL definition
* Linting
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Changed timeout from config, load platform discover to None
* Proposed change for discover info issue
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* start of fan groups
* update fan classes
* update group entity domains
* add set speed
* update discovery for multiple entities for groups
* add fan group entity tests
* cleanup const
* cleanup entity_domain usage
* remove bad super call
* remove bad update line
* fix set speed on fan group
* change comparison
* pythonic list
* discovery guards
* Update homeassistant/components/zha/core/discovery.py
Co-Authored-By: Alexei Chetroi <lexoid@gmail.com>
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Abort rachio homekit config when one is already setup.
We can see rachio on the network to tell them to configure
it, but since the device will not give up the account it is
bound to and there can be multiple rachio controllers on a single
account, we avoid showing the device as discovered once
they already have one configured as they can always
add a new one via "+"
* doc string freshness
* doc string freshness
* Update tests/components/rachio/test_config_flow.py
Co-Authored-By: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Update PySwitchbot to 0.8.0 and added password configuration
* Removed unchanged retry_count attribute
* Fix dependencies and formatting
* Removed default value for password and use config.get instead
If the database server disconnects there were exceptions
that were not trapped which would cause the recorder event
loop to collapse. As we never want the loop to end
we trap exceptions broadly.
Fix a bug in the new commit interval setting which caused
it to always commit after 1s
If the database server disconnects there were exceptions
that were not trapped which would cause the recorder event
loop to collapse. As we never want the loop to end
we trap exceptions broadly.
Fix a bug in the new commit interval setting which caused
it to always commit after 1s
* bump pyvizio and update app_id to show app config to aid in HA config generation. squashed from multiple commits to make a rebase on dev easier
* bump pyvizio for bug fixes
* fix pyvizio version number
* only return app_id if app is unknown and explicitly create the dict that's returned
* fix tests
* fix docstring for app_id
* split entity into base and entity
* add initial light group support
* add dispatching of groups to light
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* fix rebase
* fix rebase
* use group_id for unique_id
* get entities from registry
* use group name
* update entity domain
* update zha storage to handle groups
* dispatch group entities
* update light group
* fix group remove and dispatch light group entities
* allow picking the domain for group entities
* beginning - auto determine entity domain
* move methods to helpers so they can be shared
* fix rebase
* remove double init groups... again
* cleanup startup
* use asyncio create task
* group entity discovery
* add logging and fix group name
* add logging and update group after probe if needed
* test add group via gateway
* add method to get group entity ids
* update storage
* test get group by name
* update storage on remove
* test group with single member
* add light group tests
* test some light group logic
* type hints
* fix tests and cleanup
* revert init changes except for create task
* remove group entity domain changing for now
* add missing import
* tricky code saving
* review comments
* clean up class defs
* cleanup
* fix rebase because I cant read
* make pylint happy
* Run-in-env script.gen_requirements_all and hassfest in pre-commit
* Apply suggestions from code review and change `language` to script
Co-authored-by: Ville Skyttä <ville.skytta@iki.fi>
We can see myq on the network to tell them to configure
it, but since the device will not give up the account it is
bound to and there can be multiple myq gateways on a single
account, we avoid showing the device as discovered once
they already have one configured as they can always
add a new one via "+"
* Fix minor issues mentioned in #30837 after it was closed
* Update homeassistant/components/bmp280/sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* some sensors working in homeassistant
* bring up to date
* add codeowner
* update requirements
* overhaul data imports from api & sensor discovery
* remove print statement
* delete requirements_test_all
* add requrements_test_all.txt
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* describe recursive function
* clarify that dict is returned
* remove requirements from requirements_test_all
* improve and simplify sensor naming
* add basic tests
* restore pre-commit config
* update requirements_test_all
* remove codespell requirement
* update pre-commit-config
* add-back codespell
* rename class variables as suggested by @springstan
* add dev branch to no-commit-to-branch git hook
Because my fork had the same 'dev' branch i wasn't able to push. Going forward I should probably name my branches differently.
* move config logic to __init__.py
* restore .pre-commit-config.yaml
* remove tests
* remove nextcloud test requirement
* remove debugging code
* implement binary sensors
* restore .pre-commit-config.yaml
* bump dependency version
* bump requirements files
* bump nextcloud reqirement to latest
* update possible exceptions, use fstrings
* add list of sensors & fix inconsistency in get_data_points
* use domain for config
* fix guard clause
* repair pre-commit-config
* Remove period from logging
* include url in unique_id
* update requirements_all.txt
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Added support for Minecraft SRV records
* Switched from dnspython to aiodns, improved server ping and log messages, use address instead of host and port in config flow
* Updated component requirements
* Fix state_automation_listener when new state is None (fix#32984)
* Listen to EVENT_STATE_CHANGED instead of using async_track_state_change
and use the event context on automation trigger.
* Share `process_state_match` with helpers/event
* Add test for state change automation on entity removal
* Use async_call_later for retrying, instead of async_track_point_in_time
* Normalize test filename renaming it to `test_sensor`
* Remove link to docs in docstring
* Adjust test results to new behavior with async_call_later
* Update firmware version in device registry.
Parse recevied OTA requests for firmware version and update device
registry.
* Update tests.
* Cleanup sw_id_update listener.
* Update ZHA test devices list.
* Add aircleaner and humidify service to nexia climate
* These were removed from the original merge to reduce review scope
* Additional tests for binary_sensor, sensor, and climate states
* Switch to signals for services
Get rid of everywhere we call device and change to zone or thermostat
as it was too confusing
Renames to make it clear that zone and thermostat are tightly coupled
* Make scene activation responsive
* no need to use update for only one key/value
* stray comma
* use async_call_later
* its async, need ()s
* cleaner
* merge entity platform services testing branch
* Updated tado integration climate.py to allow for presence change
* Updated tado integration __init__.py to allow for presence change
* Black formatting
* Added missing docstring
* Added missing period to docstring
* Using constants from climate component
* Filter out other preset_modes
* Linting error fix
* Isort error fix
* Filtering of unwanted presence mode in init
* Bumped python-tado version to 0.5.0
Removed unnecessary preset mode check
* Update requirements_all.txt
* Config flow for doorbird
* Discoverable via zeroconf
* Fix zeroconf test
* add missing return
* Add a test for legacy over ride url (will go away when refactored to cloud hooks)
* Update homeassistant/components/doorbird/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* without getting the hooks its not so useful
* Update homeassistant/components/doorbird/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix copy pasta
* remove identifiers since its in connections
* self review fixes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for Lutron Caseta occupancy/vacancy sensors
This follows updates to pylutron-caseta to add support for these
devices. This code works for me as a custom component in Home Assistant
Core with pylutron-caseta 0.6.0 (currently unreleased).
* black formatting
* Update requirements_all.txt
* Apply black formatting
* Resolve some review comments
* serial -> unique_id
* Black formatting
* Resolve linting errors
* Add code owner...
* Fix isort complaint
* Fix remaining isort complaints
* Update codeowners
* Resolve outstanding review comments
* Remove caseta_
* Modernize nuheat for new climate platform
* Home Assistant state now mirrors the
state displayed at mynewheat.com
* Remove off mode as the device does not implement
and setting was not implemented anyways
* Implement missing set_hvac_mode for nuheat
* Now shows as unavailable when offline
* Add a unique id (serial number)
* Fix hvac_mode as it was really implementing hvac_action
* Presets now map to the open api spec
published at https://api.mynuheat.com/swagger/
* ThermostatModel: scheduleMode
* Revert test cleanup as it leaves files behind.
Its going to be more invasive to modernize the tests so
it will have to come in a new pr
* Config flow for nuheat
* codeowners
* Add an import test as well
* remove debug
If the IP address of the harmony hub changed it would
not be rediscovered. We now connect to get the
unique id and then update config entries with
the correct ip if it is already setup.
* Add gate support to myq, fix bouncy updates
Switch to DataUpdateCoordinator, previously
we would hit the myq api every 60 seconds per device.
If you have access to 20 garage doors on the account it means
we would have previously tried to update 20 times per minutes.
* switch to async_call_later
* Add new integration: pvpc_hourly_pricing
to add a sensor with the current hourly price of electricity in Spain.
Configuration is done by selecting one of the 3 reference tariffs, with
1, 2, or 3 billing periods.
* Features config flow, entity registry, RestoreEntity, options flow
to change tariff, manual yaml config as integration or sensor platform
* Cloud polling sensor with minimal API calls (3/hour at random times)
and smart retry; fully async
* Only 1 state change / hour (only when the price changes)
* At evening, try to download published tomorrow prices, to always store
prices info for a window of [3, 27] hours in the future.
* Include useful state attributes to program automations to be run
at best electric prices.
* Add spanish and english translations.
* Requires `xmltodict` to parse official xml file with hourly prices
for each day.
* Update requirements and add to codeowners
* Avoid passing in hass as a parameter to the entity
Instead, create time change listeners in async_added_to_hass and
call async_generate_entity_id before async_add_entities
* Fix lint issues
* Add tests for config & options flow
* Add tests for manual yaml config
with entity definition as integration and also as a sensor platform
* Fix placement of PLATFORM_SCHEMA and update generated config_flows
* Store prices internally linked to UTC timestamps
- to deal with days with DST changes
- and work with different local timezones
* Add availability to sensor
to 'expire' the sensor if there is no connection available
and current hour is not in the stored prices.
Also, turn off logging and retrying if prices can't be downloaded
repeatedly, by flagging `data_source_available` as False, so there is no
log-flood mess.
* Add more tests
- to cover behavior in DST changes and complete coverage of sensor logic
- to cover abort config flow
* fix linter
* Better handling of sensor availability and minor enhancements
- Emmit 1 error if data source is marked as unavailable
(after some retries), and be silent until cloud access is recovered,
then emmit 1 warning.
- Follow standard of camel_case keys in attributes
* Mock aiosession to not access real API, store fixture data
- Store a set of daily xml files to test sensor logic for all situations
- Mock time and session to run tests with stored API responses
- Add availability test to simulate a lost + recovery of cloud access,
checking that logging is reasonable: 1 error to flag the continued
disconnection + 1 warning in recovery.
* Change API endpoint to retrieve JSON data
and remove xmltodict from reqs.
It seems that this endpoint is more reliable than the XML.
* Adapt tests to new API endpoint
* Translate tariff labels to plain English
and sync the default timeout value for all ways of configuration.
* Relax logging levels to meet silver requirements
- 1 warning when becoming unavailable, another warning when recovered.
- Warnings for unexpected TimeoutError or ClientError
- Move the rest to debug level, leaving info for HA internals
Also reduce number of API calls from 3 to 2 calls/hour.
* Fix requirements
* Mod tests to work with timezone Atlantic/Canary
and fix state attributes for timezones != reference, by using 3 price
prefixes: 'price_last_day_XXh', 'price_next_day_XXh' and 'price_XXh',
all generated with local time (backend timezone)
* Try to fix CI tests
* Externalize pvpc data and simplify sensor.py
* add new `aiopvpc` to requirements
* Remove data parsing and price logic from here
* Replace some constant properties with class variables
* Simplify tests for pvpc_hourly_pricing
* Fix updater for options flow
* Updater always reloads
* `tariff` value comes 1st from entry.options, 2nd from entry.data
* Fix lint
* Bump aiopvpc
* Remove options flow and platform setup
- Remove PLATFORM_SCHEMA and async_setup_platform
- Generate config_entry.unique_id with tariff instead of entity_id, in flow step.
- Remove TariffSelectorConfigFlow
- Adapt tests to maintain full coverage
* Fix docstring on test
and rename SENSOR_SCHEMA to SINGLE_SENSOR_SCHEMA to avoid confusion
* Remove timeout manual config, fix entry.options usage, simplify unique_id
* Simplify tests
- No need for a test_setup now, as platform setup is removed and integration
setup is already used in `test_availability`
- Simplified `_process_time_step`: only one async_fire(EVENT_TIME_CHANGED)/hour
* Fix possible duplicated update
when source is not available.
* Do not access State last_changed for log messages
* Do not update until entity is added to hass
and call to async_update after 1st download or when recovering access, so
async_write_ha_state is not called twice on those.
* minor changes
* Rename method to select current price and make it a callback
* General code cleanups for lutron_caseta component
* black
* Update homeassistant/components/lutron_caseta/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* filter out additional app config names from pyvizios app list
* add test
* change where filtering app list occurs
* fix test
* fix mistake in change
* hopefully final test fix
* fix test scenario that unknowingly broke with test change
* Clear state on exception
Clear state if querying the device fails. The state is then set to unknown, so it can be tracked if a miflora device isn't responding any more.
* Add available()
Signal valid data via available()
* miflora: add timeout to go unavailable
* code cleanup
* miflora: tox cleanup
* Fix scheduled update time-drift in data update coordinator
As next schedule is calculated **after** the update is done,
setting now + update_interval makes 1 second drift in practice,
as the tick is 1Hz.
* Floor the utcnow timestamp
to remove sub-second error precision, and generate constant frequency updates
as long as the update takes < 1s.
* Fix tankerkoenig with more than 10 stations
There seemed to be a problem, if more than 10 fuel stations were tracked.
Added a warning in this case, and split the calls to the API in chunks of
10, so that the data can be fetched anyway.
* Update homeassistant/components/tankerkoenig/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Split ZHA device loading and entities adding.
Load zha devices from ZHA gateway, but add entities after integration
was setup.
* Use hass.loop.create_task()
* Split ZHA device initialization from loading.
Restore and initialize ZHA devices separately.
* Use hass.async_create_task()
Load devices prior group initialization.
* Fix tankerkoenig with more than 10 stations
There seemed to be a problem, if more than 10 fuel stations were tracked.
Added a warning in this case, and split the calls to the API in chunks of
10, so that the data can be fetched anyway.
* Update homeassistant/components/tankerkoenig/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Split ZHA device loading and entities adding.
Load zha devices from ZHA gateway, but add entities after integration
was setup.
* Use hass.loop.create_task()
* Split ZHA device initialization from loading.
Restore and initialize ZHA devices separately.
* Use hass.async_create_task()
Load devices prior group initialization.
* Validate UUIDs against custom validator
Instead of just validating against strings, use a custom validator,
so that the format can be checked.
* Add tests for custom UUID4 validator
* Add support for nexia automations
Bump nexia to 0.7.1
Start adding tests
Fix some of the climate attributes that were wrong (discovered while adding tests)
Pass the name of the instance so the nexia UI does not display "My Mobile"
* fix mocking
* faster asserts, scene
* scene makes so much more sense
* pylint
* Update homeassistant/components/nexia/scene.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* docstring cleanup
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add a config flow for myq
* Discovered by homekit
* Fix gates being treated as garage doors
* Offline devices now show as unavailable
* Homekit flow
* strip out icon
* return -> raise
* Modernize nuheat for new climate platform
* Home Assistant state now mirrors the
state displayed at mynewheat.com
* Remove off mode as the device does not implement
and setting was not implemented anyways
* Implement missing set_hvac_mode for nuheat
* Now shows as unavailable when offline
* Add a unique id (serial number)
* Fix hvac_mode as it was really implementing hvac_action
* Presets now map to the open api spec
published at https://api.mynuheat.com/swagger/
* ThermostatModel: scheduleMode
* Empty commit to re-run ci
* Revert test cleanup as it leaves files behind.
Its going to be more invasive to modernize the tests so
it will have to come in a new pr
Add new "amcrest.ptz_control" service to specify a PTZ camera movement or zoom direction (up, down, right, left, right_up, right_down, left_up, left_down, zoom_in, zoom_out). An optional travel_time attribute specifies the amount of movement between start/stop.
* Wait for cloud connection
* Just wait
* Remove redundant entry
* Drop webhook before unloading other platforms
* Add missing scope
* Update homeassistant/components/netatmo/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Wait for cloud connection
* Just wait
* Remove redundant entry
* Drop webhook before unloading other platforms
* Add missing scope
* Update homeassistant/components/netatmo/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add tests for states of the sensors
* Revert async_update method
* Tests improvement
* Fix icon name
* Tests improvement
* Simplify tests
* Test improvement
* Patch the library instead of the coordinator
* Suggested change
* Remove return_value
* Convert amcrest binary sensors from poll to stream
- Bump amcrest package to 1.6.0.
- For online binary sensor poll camera periodically to test communications in case
configuration & usage results in no other communication to camera.
- Start a separate thread to call camera's event_stream method since it never returns.
- Convert all received events into signals that cause corresponding sensors to update.
- Use camera's generic event_channels_happened method to update sensors at startup,
and whenever camera comes back online after being unavailable.
* Changes per review
* Changes per review 2
* Changes per review 3
- Move event stream decoding to amcrest package.
- Change name of event processing threads so global
counter is no longer required.
- Bump amcrest package to 1.7.0.
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* Update powerwall unique id
* Fix somfy optimistic mode when missing in conf (#32995)
* Fix optimistic mode when missing in conf #32971
* Ease code using a default value
* Client id and secret are now inclusive
* Bump aiohomekit to fix Insignia NS-CH1XGO8 and Lennox S30 (#33014)
* Axis - Fix char in stream url (#33004)
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* deCONZ - Add support for Senic and Gira Friends of Hue remote… (#33022)
* Update the test
* Harmony config flow improvements (#33018)
* Harmony config flow improvements
* Address followup review comments from #32919
* pylint -- catching my naming error
* remove leftovers from refactor
* Update powerwall unique id
* Update the test
Co-authored-by: tetienne <thibaut@etienne.pw>
Co-authored-by: Jc2k <john.carr@unrouted.co.uk>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Merge nexia
* Restore original work
* Merge cleanups
* config flow
* Add config flow
* Add missing files
* Fix import of old yaml config
* More cleanups from self review
* Additional self review
* Update homeassistant/components/nexia/services.yaml
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix io in event loop
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* avoid using ternary statements if they span multiple
* Cleanup strings and remove unneeded attributes
* more cleanup
* more cleanup of yaml
* remove coordinator boiler plate
* nuke services for now for the inital pr, add back later
* remove copy pasta
* this can be reduced more
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* review
* comments
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* more review adjustments
* nuke unused constants
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* map states
* add update
* zone id is unique
* Fix humidfy check
* target_humidity should be a property instead of in attributes
* remove aux heat as its already there
Co-authored-by: Ryan Nazaretian <ryannazaretian@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* An unwanted character had found its way into a stream string, reverting f-string work to remove duplication of code and improve readability
* Fix failing tests
* Config flow for harmony
* Fixes unique ids when using XMPP
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
* Find the unique id for the config flow
* move shutdown to init
* Add test for ssdp (still failing)
* Fix ssdp test
* Add harmony to MIGRATED_SERVICE_HANDLERS (this is a breaking change)
* more cleanups
* use unique id for the config file
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
The existing sensor icons, while descriptive - dead = dead - are perhaps too matter of fact and don't accurately convey the tragedy. I changed emoticon-dead-outline to emoticon-cry-outline, as I think it better conveys the reality of the situation along with the emotions tied to the statistic.
* Fix iCloud init while pending
Continue if device is pending while setup
Create devices and fetch 15s if pending, otherwise determine interval to fetch.
* Add retried_fetch guard
The existing sensor icons, while descriptive - dead = dead - are perhaps too matter of fact and don't accurately convey the tragedy. I changed emoticon-dead-outline to emoticon-cry-outline, as I think it better conveys the reality of the situation along with the emotions tied to the statistic.
* Fix iCloud init while pending
Continue if device is pending while setup
Create devices and fetch 15s if pending, otherwise determine interval to fetch.
* Add retried_fetch guard
* here_travel_time: Add modes arrival and departure
* convert arrival/departure from datetime to time
* Default departure is set by external lib on None
* Use cv.key_value_schemas
* Initial commit
* Restricting conditions by supported_features, drop pending condition
* Added tests for no and minimum amount of conditions
* Address review comments
* Sort impors with isort
* Sort impors with isort v2
* Add 'Yeelight LED Ceiling Light' model
Add new model https://www.yeelight.com/en_US/product/luna
* Update requirements_all.txt bump to yeelight 0.5.1
Update requirements_all.txt bump to yeelight 0.5.1
* Update manifest.json, bump to 0.5.1
Update manifest.json, bump to 0.5.1
* set alarmdecoder code_arm_required to False
* rm unnecessary f strings
* add code_arm_required config option
* add self as codeowner :-)
* add self as codeowner the right way
* Updating SynologySRM device trakcers to show additional information
* Fixes
* Aliasing attributes to snake case
* Sugguested changes as per MartinHjelmare
* add feet to meter conversion
* convert pressure and wind. fix wind for metric.
* dont convert wind speed in metric.
pymetno already converts it.
* add units to setup_platform constuctor
* Add tests for several devices
* Update coveragerc
* Code review changes and minor clean up
* More code review changes
* Update manifest and minor test updates
* Add test for locks and covers
* Add tests for switch on and off
* Add more complete test for alarms
* Fix for camera test
* Patch abodepy.mode for tests
* Add test for unknown alarm state and minor cleanup
* Update to make tests more robust
* More specific tests
* Update quality scale to silver
* Remove integration quality scale
* Add model to rachio device info
Address followup items
* Address review items, retest zone updates back and forth, and standby mode
* Remove super
* Revert "Remove super"
This reverts commit 02e2f156a9.
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/rachio/binary_sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Require a hyphen in lovelace dashboard url
* Keep storage dashboards working
* register during startup again
* Update homeassistant/components/lovelace/dashboard.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Comments
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Catch asyncio.TimeoutError, show a proper message instead
* Throttle updates to max once per 30s
* Change code owner
* Fix CODEOWNERS + linting
* Warn on connection timeout
* Require a hyphen in lovelace dashboard url
* Keep storage dashboards working
* register during startup again
* Update homeassistant/components/lovelace/dashboard.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Comments
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Catch asyncio.TimeoutError, show a proper message instead
* Throttle updates to max once per 30s
* Change code owner
* Fix CODEOWNERS + linting
* Warn on connection timeout
* Do not fail when a user has a controller with shared access on their account
* Add config flow for rachio
Also discoverable via homekit
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Split setting the default run time to an options flow
Ensue the run time coming from yaml gets imported into the option flow
Only get the schedule once at setup instead of each zone (was hitting rate limits)
Add the config entry id to the end of the webhook so there is a unique hook per config entry
Breakout the slew of exceptions rachiopy can throw into RachioAPIExceptions
Remove the base url override as an option for the config flow
Switch identifer for device_info to serial number
Add connections to device_info (mac address)
* rename to make pylint happy
* Fix import of custom_url
* claim rachio
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* emulated_hue: Optimize is_entity_exposed
Switch all list transversals in is_entity_exposed to
hash lookups
get_deprecated is now only called if explict_expose is
set
This funciton was iterating multiple lists per enitity
every time there was an update. It was responsible for
a chunk of execution time when there are large number
of entities in home assistant.
* Complete deprecation of ATTR_EMULATED_HUE attribute
* Complete deprecation of ATTR_EMULATED_HUE attribute (remove const)
* Remove ATTR_EMULATED_HUE_HIDDEN and Rewrite tests
* Extend rtorrent sensor functionality.
* Remove blank line from end of file.
* After using black formatter.
* Update sensor.py using snake_case for variable names.
* Update PR by using true value in condition.
* move apps configuration to options flow
* add additional assertion to new test
* add additional assertions for options update
* update docstrings, config validation, and tests based on review
* Add set_memo_text service
* Apply template rendering for memo text
* Update constants to comply to naming conventions
* Local variable for module address and extended error description
* fixed typo
* Use platform tag to register components on hue SensorManager
instead of a boolean flag to decide between sensor and binary sensor,
so it could be used externally (or to get ready for inclusion of other comps)
* Make new item discovery platform agnostic for SensorManager
instances whenever the volume was requested a division calculation was made
resulting in a TypeError. The volume adjustment from `0-100` to `0-1` is now
calculated during the `update()` method.
* Fix delijn sensor stuck on last passage
If the returned passage is an empty list that means there are
no next passages, so the sensor should be updated accordingly
* Mark the sensor as unavailable instead of emptying data
* use available property
* add available property
instances whenever the volume was requested a division calculation was made
resulting in a TypeError. The volume adjustment from `0-100` to `0-1` is now
calculated during the `update()` method.
* Add limit parameter to service call methods
* Break out prep part of async_call_from_config for use elsewhere
* Minor cleanup
* Fix improper use of asyncio.wait
* Fix state update
Call change listener immediately if its a callback
* Fix exception handling and logging
* Merge Script helper if_running/run_mode parameters into script_mode
- Remove background/blocking _ScriptRun subclasses which are no longer needed.
* Add queued script mode
* Disable timeout when making fully blocking script call
* Don't call change listener when restarting script
This makes restart mode behavior consistent with parallel & queue modes.
* Changes per review
- Call all script services (except script.turn_off) with no time limit.
- Fix handling of lock in _QueuedScriptRun and add comments to make it
clearer how this code works.
* Changes per review 2
- Move cancel shielding "up" from _ScriptRun.async_run to Script.async_run
(and apply to new style scripts only.) This makes sure Script class also
properly handles cancellation which it wasn't doing before.
- In _ScriptRun._async_call_service_step, instead of using script.turn_off
service, just cancel service call and let it handle the cancellation
accordingly.
* Fix bugs
- Add missing call to change listener in Script.async_run
in cancelled path.
- Cancel service task if ServiceRegistry.async_call cancelled.
* Revert last changes to ServiceRegistry.async_call
* Minor Script helper fixes & test improvements
- Don't log asyncio.CancelledError exceptions.
- Make change_listener a public attribute.
- Test overhaul
- Parametrize tests.
- Use common test functions.
- Mock timeout so tests don't need to wait for real time to elapse.
- Add common function for waiting for script action step.
* Add config flow to Freebox
* Add manufacturer in device_tracker info
* Add device_info to sensor + switch
* Add device_info: connections
* Add config_flow test + update .coveragerc
* Typing
* Add device_type icon
* Remove one error log
* Fix pylint
* Add myself as CODEOWNER
* Handle sync in one place
* Separate the Freebox[Router/Device/Sensor] from __init__.py
* Add link step to config flow
* Make temperature sensors auto-discovered
* Use device activity instead of reachablility for device_tracker
* Store token file in .storage
Depending on host if list of Freebox integration on the future without breaking change
* Remove IP sensors + add Freebox router as a device with attrs : IPs, conection type, uptime, version & serial
* Add sensor should_poll=False
* Test typing
* Handle devices with no name
* None is the default for data
* Fix comment
* Use config_entry.unique_id
* Add async_unload_entry with asyncio
* Add and use bunch of data size and rate related constants (#31781)
* Review
* Remove useless "already_configured" error string
* Review : merge 2 device & 2 sensor classes
* Entities from platforms
* Fix unload + add device after setup + clean loggers
* async_add_entities True
* Review
* Use pathlib + refactor get_api
* device_tracker set + tests with CoroutineMock()
* Removing active & reachable from tracker attrs
* Review
* Fix pipeline
* typing
* typing
* typing
* Raise ConfigEntryNotReady when HttpRequestError at setup
* Review
* Multiple Freebox s
* Review: store sensors in router
* Freebox: a sensor story
* Clean up use of get_characteristic_types
* Get rid of get_hk_char_value helper
* Get rid of _update_fn callbacks
* Call async_write_has_state directly as async_state_changed doesnt do anything any more
* cleanup timer handle when device is removed
* separate unavailable times for mains vs battery
* better name
* remove light refresh handle when removing light
* remove unused parallel updates
* don't steal HA const for different purpose
* don't flood network every hour for lights
* update test to test both intervals
* add test for light refresh interval
* fix tests
* update test
* put parallel updates back for now...
* fix async_schedule_update_ha_state usage
* review comment
* review comment
* update test - review conversation
* review comments
* await count not call count
* flip some state
* adkj
* reduce
* Convert august to async
Async io was added to py-august 0.24
* Fix lint
* Lock operation sensors for august
* Tracking lock operation method allows user presence detection at the lock
* revert lock changes
* fix activity count merge conflict reversion
* Fix revert that come back with the conflict
* Start webhook implementation
* Add webhook implementation
* Bump pyatmo 3.2.5
* Fire event after data evaluation
* Setup webhooks after components
* Fix logging
* Wrap non async call
* Wrap non async call
* Add smoke detector and door tag webhook support
* Catch when webhook registration fails
* Log to debug
* Fix persons lookup
* Add dependency
* Remove false requirements
* Fix requirements
* Replace netatmo events by a single one
* Slim down code
* Clean up code
* Address review vomments
* Undo attribute removal
* Bump pyatmo to v3.3.0
* Only create webhook id once and reuse
* Store and reuse cloudhook url
* Wait for hass core to be up and running
* Register webhook once HA is ready
* Delay webhook registration
* Use f-strings in integrations starting with "M"
* Format mqtt light init with black
* Fix lint error
* Fix pylint error
* Restore constants
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Format with Black
* input_datetime guard for unexpected state
If state is a time and has_date = true, or the other way around, restore state would error
* Update __init__.py
* Add test
* Fix for door_lock_state attribute error
* Updates based on review comments
* Remove update_time
* Remove update time in lock
* Remove update time in sensor
* Remove unused variable
* Change return for device_state_attributes
* Add griddy integration
* Griddy is a wholesale power provider in Texas
* Supports all four load zones in Texas
* Provides real time power price which is useful for automations to handle demand response
* Update homeassistant/components/griddy/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/griddy/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Add ability request updated via entity update service.
* Improve error message about already configured
* Remove DEVICE_CLASS_POWER since we do not have a device class for cost
* remove setdefault that was left from previous refactor
* More detail on data naming
* Bump translation for testing
* git add the config flow tests
* s/PlatformNotReady/ConfigEntryNotReady/
* Review items
* git add the other missing file
* Patch griddypower
* reduce
* adjust target
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Fetch iCloud devices again if the status is pending
* Remove "No iCloud device found" double check
* fix default api_devices value
* Remove useless unitialisation declarations
* Add support for melcloud Air-to-Water devices
* Add water_heater entity for the water heater component.
* Add individual climate entities for 0-2 supported radiator zones.
* Add sensors for zone room temperatures, outdoor temperature and tank
temperature.
* Update .coveragerc
* Use device_state_attributes
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Complete state_attributes -> device_state_attributes migration
* Move constants to top of file
* Remove async_turn_on/off
* Drop mac from ATW unique_ids
* Add MAC to device_info connections
* Remove redundant ABC inheritance
* Update homeassistant/components/melcloud/water_heater.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added support for newer SamsungTV models
* Fixed legacy port
* store token in HA config directory
* Change token name
* rebasing and exception handling
* implement update
* fix error creating mediaplayer
* Debug logging
* Increase timeout
* Restore update timeout
* Store token_file path in config_entry
* Introduction of samsung bridge class
* Added bridge class functions
* Code cleanup
* more fixes
* Begin testing
* samsungtvws 1.2.0
* Config flow tests 0.1
* Fixed some mediaplayer tests
* Fixed fixture in media player
* use of constants and turn off
* more media player tests
* samsungtvws 1.3.1 and other fixes
* WS tv update rewritten
* more tests
* test_init
* fixed tests
* removed reset mock
* tests reset mock
* close_remote and tests
* deprecate port config
* deprecate port config 2
* deprecate port config 3
* save token only if needed
* cleanup
* better websocket protocol detection
* config removal
* Breakout tado zone code into a single place
* Resolve various incorrect states and add tests for known tado zone states
* Fix home and away presets
* Upgrade to PyTado 0.4.0 which improves http performance and fixes setting fan speed.
* Write state instead of calling for an update
* adjust codeowners
* Add tests for michael's tado and fix heatingPower.value
* Guards are much cleaner
* Adjust per review
* Remove hass passing
* Add a commit interval setting to recorder
* Make the default every 1s instead of immediate
* See attached py-spy flamegraphs for why 1s
* This avoids disk thrashing during event storms
* Make Home Assistant significantly more responsive on busy systems
* remove debug
* Add commit forces for tests that expect commits to be immediate
* Add commit forces for tests that expect commits to be immediate
* make sure _trigger_db_commit is in the right place (all effective "wait_recording_done" calls)
* De-duplicate wait_recording_done code
* alexa/capabilities.py: Fix TypeError Exception
- Remove division by zero try/catch -- there is no division
- Handle TypeError exception when current_volume = None
- Simplify math and return logic
* Add test for Alexa.Speaker's valid volume range
* Bump aiohomekit to get better reconnection handling and cleaner shutdowns.
* Read the ACTIVE characteristic and set ok/problem state
Also gets test coverage to 100%.
* Update Steam intergration to list screenshot paths and Steam game ID
* Steam entity_picture now changed to game art when in-game
* Steam - changing API endpoints to constants
* Steam - formatting code for lint
* Update sensor.py
*Removing entity_picture image switching based on current playing game
* Steam - tidying up code
* Update homeassistant/components/steam_online/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Update PyUbee to 0.9
Adds support for Ubee Router DVW32CB
* Add support for Ubee Router DVW32CB
* Update pyubee to 0.9
Adds support for router DVW32CB
* Refactor zha core device _check_available().
Make it async, so we don't run it in a sync worker.
* Use random keep alive interval for zha device pings.
* Update tests.
* Update Yandex transport after API change (home-assistant#32431)
* Update mocked response for test (home-assistant#32431)
* Codestyle fixes (home-assistant#32431)
* multi attribute reads for lights
* catch specific exceptions
* get attributes
* fix mains powered update
* add guards and use get_attributes
* use debug for read failures
* cleanup
* update return value for read_attributes
* fix on with timed off
* specify rtsp_transport for onvif camera
* remove used variable
* Update homeassistant/components/stream/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* change options to stream_options
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
This commit add those new modes with avaibility to select mode and params in service call.
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
Update service helper for new avaibility to select mode and params in service call.
* RelativeMode as default move_mode to avoid breakchange
RelativeMode as default move_mode to avoid breakchange
* add missing attribute
add missing continuous_duration attribute
* change service attribute label for continuous_duration
* update description
fix wrong assertion for move_mode attr description
* Update services.yaml
* Update services.yaml
fix wrong wording for move_mode
* Update camera.py
Using defined constants instead of raw strings in conditions
* Update camera.py
Replace integer to floating point in logger debug PTZ values
* Update services.yaml
* Update services.yaml
* Update camera.py
* Update camera.py
* use dict[key] for required schema keys and keys with default schema values
* remove async for setup_ptz method
* lint error
* remove unecessary PTZ_NONE = "NONE"
changed request by @MartinHjelmare
* addressing @ MartinHjelmare comments
- Remove None in defaluts and dicts
- Replace long if blocks
* remove NONE
* lint issue
* Update camera.py
* Fix lint error - typo
* rename onvif_ptz service to just ptz
* rename onvif_ptz service to just ptz
* use dict[key] when default values are set
use service.data[key] instead of service.data.get[key] when default value is set in service schema
* adresse comment: use dict[key] for pan tilt zoom
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add app support
* code cleanup, add additional test, add CONF_APPS storage logic for import
* simplify schema defaults logic
* remove unnecessary lower() and fix docstring
* remove default return for popping CONF_APPS during import update because we know entry data has CONF_APPS due to if statement
* further simplification
* even more simplification
* fix type hints
* move app configuration to separate step, fix tests, and only make app updates if device_type == tv
* remove errors variable from tv_apps and move tv_apps schema out of ConfigFlow for consistency
* slight refactor
* remove unused error from strings.json
* set unique id as early as possible
* correct which dictionary to use to set unique id in pair_tv step
* Returns an unencrypted location of all persons with device trackers
* Handle encrypted messages and exclude the poster's location
* Friends is by default False. Reformats with Black
* Updates the context init to account for the Friends option
* Fix Linter error
* Remove as a config option
* No longer imports encyrption-related functions in encrypt_message
* Fix initialization in test
* Test the friends functionality
* Bugfix for persons not having a location
* Better way to return the timestamp
* Update homeassistant/components/owntracks/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Linting and tid generation
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bugfix: correctly handle non-UTC TZs
* bugfix: system mode is always permanent
* bugfix: handle where until is none
* tweak: improve logging to support above fixes
* Fetch iCloud devices again if the status is pending
* Remove "No iCloud device found" double check
* fix default api_devices value
* Remove useless unitialisation declarations
* added presets for switch devices
* added channel type to __init and const
* ran pylint on library so needed a few changes in names
* removed callback
* bool -> cv.boolean
* Add attribute
latest release tag
* add attrs =
and only create attr Tag if exists
made requested changes
* change condition for _latest_release_tag
to use self._github_data.latest_release_url
* Correct changes
* Update sensor.py
* blackify
* Emoncms API provides a Unit
The EmonCMS API has been amended to include a 'unit' as part of it's payload. By using this information, all the sensors can be created without the need for individual sensors to be setup by type.
The change is backward compatible so if a unit type has been specified in the configuration, this will be used by default.
If no unit is pecified either by the Home Assistant configuration, or the Emoncms API, then the default of W will be used as before.
* Update sensor.py
Check the 'unit' key is in the API call. Older systems may not have that key in the payload.
* Modified approach with new configuration item
* Removed new config item
Removed the configuration item. The integration attempts to get the unit from the API.
If this fails *or* the unit key of the API is blank, either the specified unit, or the default will be used.
If approved, documentation will be updated.
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Apply suggestions from code review
* Apply suggestions from code review v2
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update sensor.py
Update `config_unit`
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* [soundtouch] workaround for API bug when removing multiple slaves from a zone at once
* [soundtouch] added additional attributes exposing multiroom zone info
* Fix update with slave entities
* Add zone attributes test
* Fix and clean up tests
* Fix typo
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add edl21 component for SML-based smart meters
* edl21: Remove unused variable
* [edl21] Add 1 minute throttle to the sensor
* Update homeassistant/components/edl21/manifest.json
Fix documentation URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Move imports to top
* edl21: Remove special case for STATE_UNKNOWN, which replicated default behavior
* edl21: Implement blacklist for and warn about unhandled OBIS values
* edl21: Make blacklist global
* edl21: Add filter to issues URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Rename device to entity
* edl21: Don't schedule async_add_entities
* edl21: Use dispatcher, implement own throttling mechanism
* edl21: Simplify keeping track of known obis
* edl21: Use whitelist for state attributes
* edl21: Remove dispatcher on shutdown
* edl21: Convert state attributes to snakecase
* edl21: Annotate handle_telegram with @callback
* edl21: Call async_write_ha_state instead of schedule_update_ha_state
Co-authored-by: David Straub <straub@protonmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Allow string values on zwave.set_node_value
This allows for:
* Accessing longer value_ids. In some cases, value ids in z-wave nodes are very large (17 digits in my case). Passing them as int does not seem to work well (python probably truncates the number), but passing them as string works fine
* Changing color values, which are represented as hex string
reformat test
* update services.yaml with string set_node_value
The documentation for google_travel_time was at odds with the
implementation. The documentation stated a default scan time of
5 minutes, but the implementation was using Throttle which resulted
in the sensor updating at a maximum rate of one API call every
5 minutes. This was especially at odds with a given example at
the end of the documentation, which showed updating the sensor
every 2 minutes during commute times.
This change brings the implementation in line with the docs by
adopting the `SCAN_INTERVAL` constant set to the stated default
of 5 minutes and removing the Throttle.
* Update image_processing.py
Adds save timestamp file and adds last_detection attribute
* Update test_image_processing.py
Adds test
* Adds assert pil_img.save.call_args
* Test timestamp filename
* Add test bad data
* Update test_image_processing.py
* Fix bad image data test
* Update homeassistant/components/sighthound/image_processing.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Reduce log level for initial error and bump library version
* Use new buienradar library version which reduces the log level
for some types of warnings.
* Initially logs at a lower level and only logs at WARN for repeated
errors.
This should serve to reduce confusion with users such as in
issue #32301.
* Fix linter error with new linter settings.
* Fix linter warning
* Update homeassistant/components/buienradar/util.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* code quality improvements
* code quality improvements and fixed tests
* explicitly set unique ids
* improve unique id creation
* remove entities from entity registry
* added test for removing entities from entity registry
* revert entity registry handling from sensor and test code
* check for entity registry removal in geolocation test case
* make import absolute; isort
* change quality scale
* add is_muted property and update tests
* black
* manually set is_muted on async_mute_volume calls to set state early
* combine two lines into one
* set is_muted to None when device is not on
* Flume Cleanups
* Sensors now show the name
* include_devices and exclude_devices are now available in the config.
* Address review items
* bump as 0.3.0 is published
* Move keypad battery implementation details into py-august
* Upgrade to py-august 0.22.0 which also adds gen2 doorbell battery data
* remove cruft from previous refactor
* refactoring for multi platform
* adopted test_bridge to refactoring
* refactoring tests for multi-platform
additional coverage in config and init
* comment for clarity
* more specific imports from lib
* library version bump
* removed async_update
* changed parameter order to start with hass
* removed pylint disable
* unsubscribe from signal dispatcher
inherit from Entity
* use device.unique_id
* changed hass_obj to hass
* added test for remove entity
bug fix from the test
* removed the polling try_connect. hate polling... it is now part of the async_setup()
significantly makes the code clearer and simplifies the tests
* removed leftover debug logs in the library
* changed tests to get the entry_id from hass
* changed place to assign hass.data only after success
* fixes for test_init
* removed assert
* removed device_info
* removed bridge internal from common
* modified test_bridge to work without the bridge directly
* removed bridge from test_existing_update
* changed update to not use bridge internals
* dyn_bridge fixture no longer used - removed
* Initial version
Parse configuration, but return a fixed value
* Add basic functionality
Request real data from the server
Currently the prices are not getting updated, but the petrol station
data is real
* Update values regularly
The tankerkoenig values get updated regularly with real data.
* Move base functionality for the sensor to a base class
And move that to an own file, so that it can be inherited
* Reduce calls to tankerkoenig api
Use a master/slave concept for sensors; one master gets the data and
updates it into the slaves.
* Update requirements files
* Update all gas stations at once
* Remove tests directory
Currently there are no tests for the integration; will be added in
a future commit.
* Fix slaves not being updated
Let the base class regularly poll, so that slaves are also updated
* Refactor entity creation
Create an auxiliary method to add a station to the entity list,
in preparation to allowing extra stations.
* Add possibility to manually add stations
Add a new configuration option "stations" to manually add extra stations
* Fix style issues
Make the code more pythonic
* Remove redundant code
Implement suggestions from the code review
* Change to platform component
Remove the master/slave concept, in favor of a platform with dummy sensors.
The platform takes care of contacting the server and fetching updates
atomically, and updating the data on the sensors.
* Rename ATTR_STATE
Rename the attribute to "IS_OPEN", to avoid confusion with the sensor state.
* Minor updates
Combine two consecutive error logs into a single one.
Update the sensor's icon
* Separate address into different fields
* Style updates
Use "[]" syntax instead of ".get()" for required parameters
Use warning log level for not available fuel types
* Implement review comments
Fix style issues
Improve error messages
Remove redundant options
* Refactor using DataUpdateCoordinator
Use the new DataUpdateCoordinator to fetch the global data from
the API, instead of implementing an own method.
Also fix comments from the PR
* Implement PR comments
Implement suggestions to improve code readability and keep the Home Assistant style.
Also separate fetching data to an async thread
* Add a shadow for covers that do not support postion
* Rename shadow as optimistic
* Set optimisic default mode
* fix black error
* Remove redundant check
* optimisitc variable name consistency with config
* Various code review items from previous PRs
* Add a test for fetching the doorbell camera image
* Switch to using UNIT_PERCENTAGE for battery charge unit
* Add tests for changed_by
* Allow managing Lovelace storage dashboards
* Make sure we do not allow duplicate url paths
* Allow setting sidebar to None
* Fix tests
* Delete storage file on delete
* List all dashboards
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
* change state to latest_release_url
to have a meaningful frontend representation.
self._github_data.latest_commit_sha is still available in the attributes, so no info is lost
* template state to show only the tag
and not the full url to the tag
* add guard to update(self) for state
* add empty line 150
black...
* Update sensor.py
* add SHA if no release url
* Correct sha to 7 digits
* take out fallback on state
* Add Avri waste collection sensor
* Apply black formatting
* Update manifest
* Add requirements
* Add sensor to coverage
* Update import order
* Bump dependency to include todays pickup
* Bump avri version in requirements_all.txt
* Code review comments
* Reduce scan interval to 4 hours
This makes sure that no matter what happens, in
the morning the correct dates have been pulled
without the old ones lingering for too long.
* Better logging
* Made scan interval a timedelta
* Fix import order
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Use filter instead of break statement
* Use positive int for house number extension
* Switch voluptuous types for house number and house number extension
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Implement `available`
* Bump avri api
* Code review comments
* Replace `postcode` with `zip_code`
* Update logic for `available`
* Remove variable for delimiter
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* added entry listener that reloads the component
* fixed update with existing entry
* fixed import in test
* fixes
* library version
* removed unique_id
* fix
* fixed for no entries in hass.data
* fixed return value on abort
* moved to use async_entries
* removed unused import
* support pairing through config flow
* simplify import failure log messages
* remove unnecessary list comprehension
* bump pyvizio to add passing ClientSession in where it was missed
* show different message if user completes pairing through import
* remove dupe failure message since reasons for failure are the same in both instances
* remove extra constant
* add host reachability check during pairing workflow
* revert redundant connection check since check is implicitly done during pairing process
* fix rebase errors
* fix string
* updates based on review
* update docstring
* missed commit
* update import confirmation message to be less wordy
* use ConfigFlow _abort_if_unique_id_configured
* fix test
* Removing polling from august
* Now using subscribers to the detail and activity
* Fix hash to list keys
* continue to the next house if one fails
* Add async_signal_device_id_update
* Fix double initial update
* Handle self.hass not being available until after async_added_to_hass
* Remove not needed await
* Fix regression with device name
When battery sensors gets created before other platforms loading deconz sensors gets created first the other platform would not create entities related to those battery sensors
When battery sensors gets created before other platforms loading deconz sensors gets created first the other platform would not create entities related to those battery sensors
* async_step_user to async_configure
* fix for lint
* fix for pylint
* fix isort and black
* fix miss-fixed black
* fixing for the python37 coverage
* fix transmission definition
* fix for Black formatting
* fix type to abort
* clean up
* clean up for the test
* fix for the test
* refactor
* split test_flow_works to three tests
* revert the assert
* remove whitespaces for flake8
* apply patch function
* fix for the patch
* fix for the black
* remove mock_coro
* fix for the black
* hue to heos
* try to fix import
* fix for the black
* revert try to fix import
* Add a pytest fixture
* fix for the black
* Reduce August doorbell detail updates
* Doorbell images now get updates from the activity feed
* Tests for activity updates
* py-august now provides bridge_is_online for available state
* py-august now provides is_standby for available state
* py-august now provides get_doorbell_image (eliminate requests)
* remove debug
* black after merge conflict
* Centralize august activity updates
* Updates appear significantly more responsive
* Should address the community complaints about "lag"
* Reduce detail updates (device end points) to one hour interval
* Signal entities to update via dispatcher when new activity arrives
* Resolves out of sync state (skipped test is now unskipped)
* pylint
* fix merge conflict
* review comments
* Remove stray
* Address review items that can be done without refactor
* Reduce August doorbell detail updates
* Doorbell images now get updates from the activity feed
* Tests for activity updates
* py-august now provides bridge_is_online for available state
* py-august now provides is_standby for available state
* py-august now provides get_doorbell_image (eliminate requests)
* remove debug
* black after merge conflict
* Config Flow for sense
* Fix unique ids so they are actually unique (and migrate the old ones)
* Fix missing solar production
* Do not mark sensors available until they have data
* Address review items
* Address review round #2
* dedup config flows
* use default (imported) options until user goes thru options flow
* address pr feedback
* correct key used to distinguish pro model
* [recorder] Use orjson to parse json faster
* Remove from http manifest
* Bump to orjson 2.5.1
* Empty commit to trigger CI
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* dedup config flows
* use default (imported) options until user goes thru options flow
* address pr feedback
* correct key used to distinguish pro model
* Add observed entities to bayesian sensor
* Update binary_sensor.py to comply with style guidelines and test_binary_sensor.py to verify the entity_id
* Update binary_sensor.py and test_binary_sensor.py to include an additional attribute for observed entities
* Use of ATTR_ENTITY_ID and numeric key of observed entity
* Update binary_sensor.py
* Update test_binary_sensor.py to verify behavior
* Update to return a list without duplicates in the state attribute
* Update binary_sensor.py: rename of ATTR_ENTITY_ID into ATTR_OBSERVED_ENTITIES
* Rename new attribute into ATTR_OCCURRED_OBSERVATION_ENTITIES and fix test
* Migrate HomematicIP Cloud services to admin services
* remove unused dict
* vacation and eco mode are usable by users
* add verify_domain_control, make service user accessible
* Remove friendly_name attribute twitch sensor
* Use deepcopy to only copy the content
* Update homeassistant/components/twitch/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/twitch/sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use f-strings in integrations starting with F
* Use f-strings in tests for integrations starting with F
* Use f-strings in integrations starting with G
* Use f-strings in tests for integrations starting with G
* Fix pylint error
* Fix broken test
* Add and use speed constants
* Add and use meter based volume and area constants
* Add and use more mass unit constants
* Add and use concentration unit constants
* Add and use watts per square meter constant
* Use more time constants
* Use more data constants
* Add tests for legacy Script helper behavior
* Add Script helper if_running and run_mode options
- if_running controls what happens if Script run while previous run
has not completed. Can be:
- error: Raise an exception
- ignore: Return without doing anything (previous run continues as-is)
- parallel: Start run in new task
- restart: Stop previous run before starting new run
- run_mode controls when call to async_run will return. Can be:
- background: Returns immediately
- legacy: Implements previous behavior, which is to return when done,
or when suspended by delay or wait_template
- blocking: Returns when run has completed
- If neither is specified, default is run_mode=legacy (and if_running
is not used.) Otherwise, defaults are if_running=parallel and
run_mode=background. If run_mode is set to legacy then if_running must
be None.
- Caller may supply a logger which will be used throughout instead of
default module logger.
- Move Script running state into new helper classes, comprised of an
abstract base class and two concrete clases, one for legacy behavior
and one for new behavior.
- Remove some non-async methods, as well as call_from_config which has
only been used in tests.
- Adjust tests accordingly.
* Change per review
- Change run_mode default from background to blocking.
- Make sure change listener is called, even when there's an unexpected
exception.
- Make _ScriptRun.async_stop more graceful by using an asyncio.Event for
signaling instead of simply cancelling Task.
- Subclass _ScriptRun for background & blocking behavior.
Also:
- Fix timeouts in _ScriptRun by converting timedeltas to float seconds.
- General cleanup.
* Change per review 2
- Don't propagate exceptions if call from user has already returned
(i.e., for background runs or legacy runs that have suspended.)
- Allow user to specify if exceptions should be logged. They will still
be logged regardless if exception is not propagated.
- Rename _start_script_delay and _start_wait_template_delay for
clarity.
- Remove return value from Script.async_run.
- Fix missing await.
- Change call to self.is_running in Script.async_run to direct test of
self._runs.
* Change per review 3 and add tests
- Remove Script.set_logger().
- Enhance existing tests to check all run modes.
- Add tests for new features.
- Fix a few minor bugs found by tests.
* Use f-strings in integrations starting with B
* Use f-strings in integrations starting with C
* Use f-strings in integrations starting with D
* Use f-strings in integrations starting with E
* Fix pylint errors
* Fix pylint errors v2
* Fix tests
* Fix tests v2
* Add support for Supla gate with sensor
* Fix Supla switch module description and state access
* Add docs to methods of Supla gate
* Add missing comma
* Remove unused import
* Sort imports of Supla cover
* Add returning availability for every Supla device
* Use direct access to dict
* Remove deprecated property "hidden"
* Remove unused constant
* Revert using get function on dict
* hookid : isort fix
* New platform: Ezviz
* updated CODEOWNERS for ezviz
* proper test requirements
* resolved conflict
* regenerated requirements
* removed stale comments, only one call to add_entities, removed unnecessary attributes
* setup is sync, not async. Removed stale comments
* Compatible with pyezviz 0.1.4
* pyezviz 0.1.4 is now requiredf
* Added PTZ + switch management
* added services.yaml
* proper requirement
* PTZ working in async mode
* Now updates the entity
* Compatible with pyezviz 0.1.5.1
* Fixed switch ir service registering
* now requires pyezviz 0.1.5.2
* now requires pyezviz 0.1.5.2
* Revert "regenerated requirements"
This reverts commit 848b317cf9.
* Rollbacked to a simpler version
* snake_case names everywhere, logging sanatizing, voluptuous proper check
* pyezviz 0.1.5, reworked the PR so that it's intelligible
* no need for services.yaml for now
* proper voluptuous validation
* Removed stale code, use proper conf variable, describe attributes
* regenerated requirements
* stale
* removed status from attributes, since we use it for available we don't need it here then.
* Fixed log message
* Deduplicate code in the august integration
* Add additional tests for august (more coming)
* Door state is now updated when a lock or unlock call returns
as the state is contained in the response which avoids
the confusing out of sync state
* revert
* document known issue with doorsense and lock getting out of sync (pre-existing)
* Address review comments
* Additional review comments
* Use f-strings in integrations starting with A
* Use f-strings in tests for integrations starting with A
* Fix pylint by renaming variable
* Fix nested for loop in f-string for aprs device_tracker
* Break long lines into multiple short lines
* Break long lines into multiple short lines v2
* Add and use time related constants
* Sort time constants and reuse them in data rate constants
* Fix greeneyemonitor import
* Fix greeneyemonitor import V2
* Fix failing here_travel_time test
* Add TIME_MONTHS and TIME_YEARS
* Use TIME_MINUTES in opentherm_gw and isy994
* Add and use TIME_MILLISECONDS
* Change inconsistent ones
* Add TIME_MICROSECONDS and TIME_WEEKS
* Use constants in apcupsd and travisci
* Fix import error in upnp sensor.py
* Fix isy994 sensor.py using TIME_YEARS
* Fix dyson tests
* Use TIME_SECONDS in more places
* Use TIME_DAYS in google wifi
* add unique_id to directv entities.
* add addiitional debug and fix tests.
* fix lint error.
* rework unique_id and flow a bit.
* review adjustments.
* review adjustments
* review adjustments
* review adjustments.
* review adjustments
* review adjustments
* review adjustments
* review adjustments
* lint
* use serial number for host unit and mac address for client units
* fix elsif
* update test with realistic client id
* lint
* Fixed volume control for Frontier Silicon media players.
* Removed unnecessary else which caused pylint test to fail.
* Removed whitespace on empty line.
* Tweaks from on springstan's suggestions and other fixes
* Apply suggestions from code review
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Comment to explain why 1 is subtracted from volume_Steps
Also reformatted using black after code review changes.
* Split up the set volume functions into steps rather than all in-line as suggested.
* Renamed _volume_steps to _max_volume.
* Prevent asnyc_update from failing if we can't get the volume steps
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Added the option to specify the name of the device in confirguration.yaml
* Adding missing default name parameter in auto-discovery FSAPIDevice constructor.
* Fixed Black formatting.
* Removed DEFAULT_NAME constant.
* Apply suggestions from code review
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
The player would report itself as ‘off’ when in certain modes (e.g ‘Music player’ or ‘Spotify’) which meant HA would lose all control (it can’t change input or set volume etc. as it thinks it’s off). Now reports STATE_IDLE in these cases and only STATE_OFF if it is actually off.
This fixes issue #20728.
* fixes per Martin Hjelmare
* pylint fix
* final fixes per request
* fixed unit tests for new config flow
* Added unit-tests to increase coverage. at 97% now
* Added unit tests for 100% coverage of component
* removed configured_host function and updated config_flow unit tests
* added a pylint directive since it tells me by mistake DOMAIN is not used
* fixed path (removed __init__)
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fixed the test as we moved from schedule_update_... to async_schedule
* Update homeassistant/components/dynalite/bridge.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed context from config_flow
changed test_init to use the core methods
* moved test_light to also use the core interfaces
* moved to config_entries.async_unload
* additional fixes for the tests
* pylint fix and removed unnecessary code
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* added break in loop
* removed last mock_coro reference
pylint fix
* added coverage for try_connect
* added check for a successful connection before bridge.async_setup succeeds
also added a "nowait" config option (default False) that avoids this check
* changed log level
* fixed accidental chmod I did
* fixed accidental change
* not storing config in bridge
* not patching asyncio
* moved CONFIG_SCHEMA into component
* moved all logs to start capitalized (and revised some of them)
* moved test_config_flow to not patch the DynaliteBridge
* also took DynaliteBridge patching out of test_init
* removed NO_WAIT
* fixes to SCHEMA
* changed _ in multi-word CONF
moved imports to component const.py
* removed tries
* removed redundant tests
* fixed some small change i broke in the library. only version update
* fixed rewuirements
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed HIDDEN_ENTITY
removed hass in test fixture
* black fixes
* removed final piece of hidden_entity from light
fix in the library
updated config flow so if the entry is already set but with a different config, calls async_update_entry
* removed DATA_CONFIGS - no longer necessary
* pylint fixes
* added coverage
* use abort in config_flow
* test update
* removed logs
* test that update actually updates the entry
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add ZHA core typing helper.
* Add aux_channels to ZHA rule matching.
* Add match rule claim_channels() method.
* Expose underlying zigpy device.
* Not sure we need this one.
* Move "base" channels.
* Framework for channel discovery.
* Make DEVICE_CLASS and REMOTE_DEVICE_TYPE default dicts.
* Remove attribute reporting configuration registry.
* Refactor channels.
- Refactor zha events
- Use compound IDs and unique_ids
- Refactor signal dispatching on attribute updates
* Use unique id compatible with entities unique ids.
* Refactor ZHA Entity registry.
Let match rule to check for the match.
* Refactor discovery to use new channels.
* Cleanup ZDO channel.
Remove unused zha store call.
* Handle channel configuration and initialization.
* Refactor ZHA Device to use new channels.
* Refactor ZHA Gateway to use new discovery framework.
Use hass.data for entity info intermediate store.
* Don't keep entities in hass.data.
* ZHA gateway new discovery framework.
* Refactor ZHA platform loading.
* Don't update ZHA entities, when restoring from zigpy.
* ZHA entity discover tests.
* Add AnalogInput sensor.
* Remove 0xFC02 based entity from Keen smart vents.
* Clean up IAS channels.
* Refactor entity restoration.
* Fix lumi.router entities name.
* Rename EndpointsChannel to ChannelPool.
* Make Channels.pools a list.
* Fix cover test.
* Fix FakeDevice class.
* Fix device actions.
* Fix channels typing.
* Revert update_before_add=False
* Refactor channel class matching.
* Use a helper function for adding entities.
* Make Pylint happy.
* Rebase cleanup.
* Update coverage for ZHA device type overrides.
* Use cluster_id for single output cluster registry.
* Remove ZHA typing from coverage.
* Fix tests.
* Address comments.
* Address comments.
* fixes per Martin Hjelmare
* pylint fix
* final fixes per request
* fixed unit tests for new config flow
* Added unit-tests to increase coverage. at 97% now
* Added unit tests for 100% coverage of component
* removed configured_host function and updated config_flow unit tests
* added a pylint directive since it tells me by mistake DOMAIN is not used
* fixed path (removed __init__)
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fixed the test as we moved from schedule_update_... to async_schedule
* Update homeassistant/components/dynalite/bridge.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed context from config_flow
changed test_init to use the core methods
* moved test_light to also use the core interfaces
* moved to config_entries.async_unload
* additional fixes for the tests
* pylint fix and removed unnecessary code
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* added break in loop
* removed last mock_coro reference
pylint fix
* added coverage for try_connect
* added check for a successful connection before bridge.async_setup succeeds
also added a "nowait" config option (default False) that avoids this check
* changed log level
* fixed accidental chmod I did
* fixed accidental change
* not storing config in bridge
* not patching asyncio
* moved CONFIG_SCHEMA into component
* moved all logs to start capitalized (and revised some of them)
* moved test_config_flow to not patch the DynaliteBridge
* also took DynaliteBridge patching out of test_init
* removed NO_WAIT
* fixes to SCHEMA
* changed _ in multi-word CONF
moved imports to component const.py
* removed tries
* removed redundant tests
* fixed some small change i broke in the library. only version update
* fixed rewuirements
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_light.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/dynalite/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed HIDDEN_ENTITY
removed hass in test fixture
* black fixes
* removed final piece of hidden_entity from light
fix in the library
updated config flow so if the entry is already set but with a different config, calls async_update_entry
* removed DATA_CONFIGS - no longer necessary
* pylint fixes
* added coverage
* use abort in config_flow
* test update
* removed logs
* test that update actually updates the entry
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Significantly reduce code in august integration
* Activity updates can now be processed by py-august
this allows us to eliminate the activity sync
code for the door sensors and locks
* Lock and door state can now be consumed from
the lock detail api which allows us to
remove the status call apis and reduce
the number of API calls to august
* Refactor the testing method for locks (part #1)
* Update homeassistant/components/august/binary_sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Switch to asynctest instead of unittest for mock.patch
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update pil.py
* Update doods and tensorflow to use convert_to_pil_image
* Update pil.py
* Add log messages on bad data
* Drop convert_to_pil_image
Just perform conversion in the integrations without seperate convert_to_pil_image()
* Add support for MQTT device triggers
* Fix test, tweaks
* Improve test coverage
* Address review comments, improve tests
* Tidy up exception handling
* Fix abbreviations
* Rewrite to handle update of attached triggers
* Update abbreviation test
* Refactor according to review comments
* Refactor according to review comments
* Improve trigger removal
* Further refactoring
* Audit state handling of august bridges and sensors
This addresses issue #29980
* Prevent setting up august locks that do not have a bridge as they will never work
* Prevent locks showing available when their bridge is offline
* Prevent door sensors from showing available when their bridge is offline
* Prevent creating door sensors for locks that do not have them
* Prevent doorbells showing unavailable when they are in standby mode
* Set SCAN_INTERVAL for binary_sensors to 5 seconds as
data comes in from the activity endpoint more frequently
* Update homeassistant/components/august/__init__.py
raise if the detail is missing when checking doorsense
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Handle another place where the lock detail could not exist
* Address review comments
* Handle lock detail update failing and add test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add oauth functionality and additional attributes
* Add tests WIP
* Make mocks work the correct way
* Use CONF_TOKEN constant for config
* Remove twitch from .coveragerc
* Update homeassistant/components/twitch/sensor.py
Lets be consistent
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Computes the features of a hue group as the union of the features of the bulbs in the group
* Moved create item to a function
* Added test for hue group features
* add timestamp to media_image_url to update image correctly
* applying isort on source
* apply black formatting on source
* using f strings in media_image_url property
* remove unnecessary casting
* Updated MCP23017 component to use latest adafruit-blinka v-3.9.0 and Adafruit_CircuitPython_MCP230xx v-2.2.2
* Added updated dependencies to requirements_all.txt
* Adjust tests after speed up to restore coverage for HomematicIP Cloud
* Fix test data
* Fixes after review
* remove duplicate cade
* remove service marker
* fix detecting capsman support
* fix isort
* moved support_capsman to update_devices()
* moved support-checks to setup method
* moved setup method to get_hub_details
* implement suggestion for device lists
* fix black formatting
* remove not needed variable wireless_devices
* fix usage of force_dhcp to seperate wireless devs
* fix black fmt
* Support XML conversion for RESTful sensors
Many devices continue to use XML for RESTful
APIs. Interfacing with these APIs requires custom
integrations or command line fork()/exec() overhead
which many of these devices can work with as if
they were JSON using xmltojson via this spec:
https://www.xml.com/pub/a/2006/05/31/converting-between-xml-and-json.html
This change implements converting XML output to
JSON via xmltojson so it can work with the existing
rest sensor component. As the attributes that
usually need to be scraped are deeper in the document
support for passing in a template to find the
JSON attributes that have been added. JSON APIs that
do not have their attributes at the top level
can also benefit from this change.
* Auto convert xml, change out the template for jsonpath
* Address review items and potentially unexpected normalize behavior with jsonpath
* Revert "Address review items and potentially unexpected normalize behavior with jsonpath"
This reverts commit fe9e179092.
* json_dict[0] turned out to be needed
* Fix CalDAV parsing of recurring events
Some CaDAV servers (see: SOGo) return the original event that contains
the recurrence rules. The CalDAV calendar component sorts and filters
events based on their start and end dates, and was failing to properly
show recurring events based on these recurrence rules.
This this change checks if an event has recurrence rules and changes the
start/end dates of the event to today if the event is set to occur
today. This allows the rest of the component logic to function properly.
* Use date from nextmost occurence
* Adding unit tests
* Add endless event unit test
* Create new vevent for each event recurrence today
* Remove redundant unit test
* Add timezone to events that have none
Python cannot compare them otherwise.
* Simplify code, add comments & guard clause
* Add test for recurring all day event
* Account for all-day events
* Remove redundant code
* Remove redundant code
* Remove unnecessary deepcopy
* Add hourly recurring tests
* Add tests for hourly repeating event
* Fix unit test
* Use event.copy()
* Add support for displaying Daf Yomi
* Ran black --fast
* Added docstring to get_daf
* Further lint fixes
* Remove unnecessary else
* clarify code
* Use fstrings
* pull daf yomi from hdate
* Update manifest version for daf_yomi support
* fix variable usage
* Update requirements
* Also pass in today's date as well
* Rename date variable to daytime_date
* Add tests for daf yomi sensor
* Update stale test IDs
* Add Tado water_heater
* Don't use climate CONSTS
* Fix logging text
* Add changes for multiple bridge support
* Address remarks
* should_poll must be False
* Remove additional async_schedule_update_ha_state()
* Not for climate
* Remove services file, incorrect info
* Guard currently playing for being a NoneType
* Revert "Guard currently playing for being a NoneType"
This reverts commit f5f56b0db0.
* Guard currently playing item is None
* Process review suggestions
* Remove services file, incorrect info
* Guard currently playing for being a NoneType
* Revert "Guard currently playing for being a NoneType"
This reverts commit f5f56b0db0.
* Guard currently playing item is None
* Process review suggestions
An AtaDevice has a boolean flag describing whether it supports energy
consumption metering. The flag was ignored resulting in sensor entities
reporting constant 0 kWh consumption.
* Update pymelcloud dependency to support the has_energy_consumed_meter
flag.
* Add ATTR_ENABLED_FN to sensor definitions for filtering out
unsupported sensors.
* Fix typing issue in sensor constructor.
* Remove unused UnitSystem constructor parameter.
* update ipma component for pyipma 2.0
* fix wind speed; refactor forecast
* update requirements*.txt
* fix tests; update CODEOWNERS; update pyipma to 2.0.1
* minor changes as suggested in PR
* make lint happy
* fix mocking coroutines
* restore old unique id
* fix station lat/lon; update pyipma version
* add hourly forecast option to IPMA
* add forecast tests
* use for instead of lambda
* Added some measurement points for Family 26.
Added three attriubtes for each sensor, DEVICE_FILE, RAW_VALUE and SENSOR_TYPE
Added some comments.
Updated to get config values for owserver to get owport and owhost.
* Changed to _LOGGER.debug in some places
Resorted includes
* Fixup of code to reflect review comment, comply to Black and pass tests
* Added unique_id Entity property with device file id and added device_file as attribute that takes its data from Entities unique_id-.
* Missing blank line identified by fake8 and black
* Changed to let device_state_attributes return attribute device_file from the self._device_file member variable of the entity.
* Changed from info to debug logging
* Add support for real-time data from SimpliSafe
* Updated requirements
* Linting
* Ensure dispatcher topic contains the domain
* Don't bother with a partial
* Websovket dataclass and other code review
* Ensure initial_event_to_use works with error
* Don't inline methods
* Don't abuse loop variable
* Simplify initial event retrieval
* Add connection lost and restored events
* Revert "Add connection lost and restored events"
This reverts commit e7ffe05938.
* Make _on_disconnect a static method
* Code review comments
* Allow entities to opt out of REST and/or websocket API updates
* Revert "Allow entities to opt out of REST and/or websocket API updates"
This reverts commit 1989f2e00e.
* Code review comments
* Fix issues with events not triggering correct entities
* Bug fixes
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Updated to the newest ihcsdk 2.5.0
* Formatted changes to make it pass CI tests
* Update to version 2.6 of ihcsdk
* Initial implementation of Vilfo router integration.
This commit is a combination of several commits, with commit messages in bullet form below.
* Added additional files to Vilfo integration.
* Added generated files.
* Fixed alphabetic order in generated config_flows.
* Continued implementation of config flow for Vilfo integration.
* Continued work on config_flow for Vilfo.
* Updated requirements in manifest for Vilfo Router integration.
* Some strings added to Vilfo Router integration.
* Vilfo Router integration updated with sensor support.
* Code style cleanup.
* Additional cleanup of config flow.
* Added additional UI strings for Vilfo Router
* Updated tests of config flow and fixed formatting
* Updated requirement upon vilfo-api-client.
* Sensor refactoring including support for icons
* Code style changes for Vilfo Router integration
* Code cleanup
* Fixed linting issues in Vilfo Router integration
* Fixed import order in test for Vilfo integration.
* Updates to Vilfo Router integration based on feedback
Based on the feedback received, updates have been made to the Vilfo Router integration.
A couple of the points mentioned have not been addressed yet, since the appropriate action has not yet been determined. These are:
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371124477
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371202896
This commit consists of:
* Removed unused folder/submodule
* Fixes to __init__
* Fixes to config_flow
* Fixes to const
* Refactored sensors and applied fixes
* Fix issue with wrong exception type in config flow
* Updated tests for Vilfo integration config_flow
* Updated dependency upon vilfo-api-client to improve testability
* Import order fixes in test
* Use constants instead of strings in tests
* Updated the VilfoRouterData class to only use the hostname as unique_id when it is the default one (admin.vilfo.com).
* Refactored based on feedback during review.
* Changes to constant names,
* Blocking IO separated to executor job,
* Data for uptime sensor changed from being computed to being a timestamp,
* Started refactoring uptime sensor in terms of naming and unit.
* Updated constants for boot time (previously uptime) sensor.
* Refactored test of Vilfo config flow to avoid patching code under test.
* UI naming fixes and better exception handling.
* Removed unused exception class.
* Various changes to Vilfo Router integration.
* Removed unit of measurement for boot time sensor,
* Added support for a sensor not having a unit,
* Updated the config_flow to handle when the integration is already configured,
* Updated tests to avoid mocking the code under test and also to cover the aforementioned changes.
* Exception handling in Vilfo Router config flow refactored to be more readable.
* Refactored constant usage, fixed sensor availability and fix API client library doing I/O in async context.
* Updated signature with hass first
* Update call to constructor with changed order of arguments
* Refresh the august access token
when needed.
Currently august will stop working when the token
expires about every six month.
This resolves issue #23788
* Make refresh_access_token_if_needed private since we do not want additional callers
* Add init
* Suppress data get timeout exceptions for 30s after notify attempts
At least SMS send failures may put the API in a state where it times out
some (but not all) data get operations for some time, e.g. 25s.
Closes https://github.com/home-assistant/home-assistant/issues/30827
* Do not pile up duplicate data requests
Do not add another request for a piece of data for which a previous
request is still in progress. For example failing SMS sends are known to
stall some (but not all) requests for some time, and firing up more is
not going to help.
As polling for lock status is every 15 minutes,
we read lock and unlock events from the activity log.
An upstream update of py-august was needed to
expose the door open and close events.
Door open and close events are now seen within
a few seconds instead of delayed 15+ minutes.
* fix unique_id computation for switches
* update konnected component to use async, config entries, registries. Pro board support and tests
* clean up formatting comments from PR
* use standard interfaces in tests
* migrate config flow to use options
* address latest pr feedback
* format for import as part of config schema validation
* address pr feedback
* lint fix
* simplify check based on pr feedback
* clarify default schema validation
* fix other schema checks
* fix translations
Co-authored-by: Nate Clark <nate@nateclark.com>
* Significantly reduce the number of API calls that the august integration
makes.
The poll interval for the lock status API is now 15 minutes
instead of every 10 seconds because we can use the activity
API to see changes in lock state. The interval for the
activity API is 10 seconds which allows for the same
frequency of state monitoring without all the additional API calls.
With four locks, this change results in an ~80% reduction in the number
of API calls.
The result of the lock and unlock APIs now update the lock state instead
of waiting for the next poll. This change also has the added benefit of
making the UI appear far more responsive.
* Convert to using UTC times
* Added support of multiple Tado accounts
Changed geberation of sensor unique id (breaking change)
* Fixed lints
* Fixed error detecting opened window
* Changed gereration of unique id of climate
* Removed commented code and added comments
* Initial commit
* ran hassfest and gen_requirements_all scripts
* fixes per request from Paulus Schoutsen
* ran gen_requirements_all
* updated library version - removed some debug leftover
* get_requirements again...
* added documentation URL
* ran isort
* changed storage in hass.data[DOMAIN] to use entry_id instead of host
* adopted unit tests to latest fix
* Update const.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add MELCloud integration
* Provides a climate and sensor platforms. Multiple platforms on one go
is not the best option, but it does not make sense to remove them and
commit them later either.
* Email and access token are stored to the ConfigEntry. The token can be
updated by adding the integration again with the same email address. The
config flow is aborted and the update is performed on the background.
* Run isort
* Fix pylint errors
* Run black
* Increase coverage
* Update pymelcloud dependency
* Add HVAC_MODE_OFF emulation
* Remove print
* Update pymelcloud to enable device type filtering
* Collapse except blocks and chain ClientNotReadys
* Add preliminary documentation URL
* Use list comp for creating model info
Filters out empty model names form units.
* f-string galore
Dropped 'HVAC' from AtaDevice name template.
* Delegate fan mode mapping to pymelcloud
* Fix type annotation
* Access AtaDevice through self._device
* Prefer list comprehension
* Update pymelcloud to leverage device type grouping
The updated backend lib returns devices in a dict grouped by the device
type. The devices do not necessarily need to be in a single list and
this way isinstance is not required to extract devices by type.
* Remove DOMAIN presence check
This does not seem to make much sense after all.
* Fix async_setup_entry
Entry setup used half-baked naming from few experimentations back.
The naming conventiens were unified to match the platforms.
A redundant noneness check was also removed after evaluating the
possible return values from the backend lib.
* Simplify empty model name check
* Improve config validation
* Use config_validation strings.
* Add CONF_EMAIL to config schema. The value is not strictly required
when configuring through configuration.yaml, but having it there makes
things more consistent.
* Use dict[key] to access required properties.
* Add DOMAIN in config check back to async_setup. This is required if an
integration is configured throught config_flow.
* Remove unused manifest properties
* Remove redundant ClimateDevice property override
* Add __init__.py to coverage exclusion
* Use CONF_USERNAME instead of CONF_EMAIL
* Use asyncio.gather instead of asyncio.wait
* Misc fixes
* any -> Any
* Better names for dict iterations
* Proper dict access with mandatory/known keys
* Remove unused 'name' argument
* Remove unnecessary platform info from unique_ids
* Remove redundant methods from climate platform
* Remove redundant default value from dict get
* Update ConfigFlow sub-classing
* Define sensors in a dict instead of a list
* Use _abort_if_unique_id_configured to update token
* Fix them tests
* Remove current state guards
* Fix that gather call
* Implement sensor definitions without str manipulation
* Use relative intra-package imports
* Update homeassistant/components/melcloud/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix ViCare water_heater set_temperature
This fixes a obvious but undiscovered bug in the water heater component:
Instead of the commanded value the prvious value was set on the API
* Bump PyVicare to 0.1.7
* add typing
* 100% battery_level is enough
* human-friendly datetime
* better enum usage
* add online and learning mode attrs
* use max two decimals in attrs
* use legacy style debug logging
* remove str usage of enums
* add feeder
* add feeder and adapt to new surepy version
* use ProductID instead of ThingID
* various changes and improvements
* add connectivity sensors for all devices & proper support for multiple hubs
* remove "side effects"/exception catching in attribs
* correct unique ids, reorder classes
* move Flap class from binary_sensor to sensor and add a sensore base class
* comments cleanup, minor typing and logging fixes
* remove commented code
* remove commented code
* add typing
* 100% battery_level is enough
* human-friendly datetime
* better enum usage
* add online and learning mode attrs
* use max two decimals in attrs
* use legacy style debug logging
* remove str usage of enums
* add feeder
* add feeder and adapt to new surepy version
* use ProductID instead of ThingID
* various changes and improvements
* add connectivity sensors for all devices & proper support for multiple hubs
* remove "side effects"/exception catching in attribs
* correct unique ids, reorder classes
* move Flap class from binary_sensor to sensor and add a sensore base class
* comments cleanup, minor typing and logging fixes
* remove commented code
* remove commented code
* fix spelling in comment to make the CI happy (seriously?!)
* fix manifest file
* fix requirements_all.txt file
* add missing docstrings
* fix available property
* remove typing from self
* remove commented code
* remove is_on property from sensor
* jump to new surepy version
* remove useles init methods
* added recorder vars db_max_retries and db_retry_wait
* fixed test_recorder_setup_failure
I failed because it was missing the two new variables. I simply added these with default values.
* fixed syntax error in test_recorder_setup_failure
* fixed formatting error in test_init_py for recorder component
* fixed typo in test case
* Updated the way the default keys for db_,max_wait and db_retry_wait is set
Implemented based on suggestions from @springstan
* Updated config_schema call to adhere to Black
* changed conf.get to conf[dict] for var retrieval
* removed 2 blank lines
* Add unique ID and device info data
* Don't get power info on switch models lacking it
* Move info fetching to update, update before adding
* Upgrade pyedimax to get device info
* Remove device info
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Only auth on enter_learning in response to errors.
* Remove extra newline.
* Add missing break on successful attempt.
* Avoid logging success message when auth is unsuccessful.
* Add Minecraft Server integration
* Add unit test for config flow
* Fixed some review findings and increased unit test coverage
* Fixed docstrings of new test cases
* Removed unnecessary debug log messages
* Added unique IDs and device infos and removed duplicate name validation
* Attempt to fix unit test on CI
* Return state OFF instead of UNAVAILABLE in case connection to server drops
* Added property decorator to server properties, even less debug messages, improved sensor dispatcher connection and other review findings fixed
* Moved special property handling to sensors, fixed name confusion in sensor entity, switch to HA const for scan_interval, simplified building players list string
* Improved periodic update, speeded up unit tests
* Added type hints, added callback decorator to entity update callback, added const.py to unit test exclusions
* Changed state sensor to binary sensor, removed empty unit test file, added constants for icons and units
* Let HA handle unknown state, check for None in description and players list sensor
* Removed periods at end of log messages, removed constant for default host
* Updated requirements_test_pre_commit.txt, fixed codespell findings
* Use localhost as default host
* Removed passing hass to entities, moved log message from init, moved host lower to vol, use proper patch library, patch library instead of own code
* Replaced server properties with global instance attributes, removed config option scan_interval, switch back to async_track_time_interval
* Removed description and players list sensors, added players list as state attributes to online players sensor, raise OSError instead of deprecated IOError, other minor review findings fixed
* Use MAC address for unique_id in case of an IP address as host, added getmac to manifest.json, added invalid_ip to strings.json, added new test cases for changes in config_flow, replace all IOError's with OSError, other review findings fixed
* Removed double assignment
* Call get_mac_address async safe
* Handle unavailable and unknown states to reach silver quality scale, added quality scale to manifest.json
- Bump amcrest package to 1.5.6. Includes networking improvements, no longer
communicates during Http.__init__(), and allows running snapshot command
without using stream mode.
- Handle login errors better, and not just at startup.
- Increase network connect & read timeout to 6.05 seconds.
- Increase network read timeout to 20 seconds for snapshot command.
- Run snapshot command in separate task, that cannot be cancelled, to eliminate
possibility of two snapshot commands running simultaneously (since
AmcrestCam.async_camera_image can be cancelled.) Also makes sure any exceptions
from the command are caught properly.
* Updated the provider name to blockchain.com
Blockchain.info moved from .info .com. Updated the name of the service to blockchain.com
* Updated the provider name to blockchain.com
Updated the provider name to blockchain.com
* initial version of gdacs integration
* updated translations
* generated files
* added abbreviation
* bumped library version
* small feed entry attribute fixes
* add unit tests
* need to use original mdi name
* bumped library version
* improved entity name for earthquakes
* round vulnerability number
* typo
* support for categories
* testing support for categories
* tie longitude and latitude together
* validating categories
* simplifying setup
* passing domain as parameter
* simplified test setup
* moved test code
* simplified test code
* removed superfluous code
* changed approach to unique identifier
* changed code structure
* simplified unit system handling
* made schema a constant
* comment added
* simplifying code
* added message if location already configured
* removed unnecessary code
* simplified test code
* avoid mocking __init__
* pylint
* simplified code
* fetch categories from integration library
* setting PARALLEL_UPDATES
* setting PARALLEL_UPDATES to zero/unlimited
* added quality scale
* Add support for belgian meter and rename some sensors
* DSMR Fixes
* Add test
* More tests
* Adjust test to latest dev
* Remove unused code
* Depend on dsmr_parser 0.18
* Use entity.async_request_call in service helper
* Clean up semaphore handling
* Address comments
* Simplify call entity service helper
* Fix stupid rflink test
* Update vizio host check to handle entries that don't have port
* add comment explaining no_port test for future
* remove _name_is_same function and support user updating name in config
* Update strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* keep track of the derivative for unit_time
In this way, you will get a better estimate of the derivate during
the timescale that is relavant to the sensor.
This solved a problem where sensors have a low output resolution.
For example a temperature sensor that can only be integer numbers.
It might report many values that are the same and then suddenly go up one value.
Only in that moment (with the current implementation) the derivative will be finite.
With my proposed implementation, this problem will not occur, because it takes the average
derivative of the last `unit_time`.
* only loop as much as needed
* treat the special case of 1 entry
* add option time_window
* use cv.time_period
* fix comment
* set time_window=0 by default
* rephrase comment
* use timedelta for time_window
* fix the "G" unit_prefix and add more prefixes
https://en.wikipedia.org/wiki/Unit_prefix
* add debugging lines
* simplify logic
* fix bug where the there was a division of unit_time instead of multiplication
* simplify tests
* add test_data_moving_average_for_discrete_sensor
* fix test_dataSet6
* improve readability of the tests
* better explain the test
* remove debugging log lines
* Yield only one Speaker interface.
* Yield PowerController only is supported.
* Revert "Yield PowerController only is supported."
This reverts commit c0dbf7e4
* Add Alexa.Speaker interface properties.
* Refactor tests for Alexa.Speaker and Alexa.StepSpeaker.
* Code Smell Change.
* Fix R1705: Unnecessary "elif" after "return".
* bump pyvizio version and add additional device info
* add patches for get_model and get_version
* change keywrod argument to positional for _test_service
* Add salt component
* Update files from development checklist
* Use warning log level when data cannot be retrieved
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Remove empty fields from manifest.json
* Remove default arguments for host and username
* Bump saltbox library version
* Refactor and improve error handling
* Dev checklist
* Fix linting errors
* Check for None and return empty list
* Log on debug level instead of info
* More compact None checks
* Remove redundant None check
* Return None on exception but store as empty list
* More compact syntax
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* added support for multiple attachments to signal_messenger integration
* updated pysignalclirestapi version in requirements_all.txt
* reworked multiple attachments feature in signal_messenger integration
* stay backwards compatible by both allowing the "attachment" and
the "attachments" attribute.
* reworked multiple attachments feature in signal_messenger integration
* stay backwards compatible by both allowing the "attachment" and
the "attachments" attribute.
* small change in signal_messenger integration
* added deprecation warning for 'attachment' attribute
* small changes in signal_messenger integration
* use 'warning' instead of 'warn' when logging the warning message
* re-generated requirements_test_pre_commit.txt
* added tests for signal_messenger integration
* regenerated requirements_test_all.txt for signal_messenger integration
* added more signal_messenger tests
* remove signal_messenger integration files from .coveragerc
BraviaRC is currently unmaintained for home-assistant. This commit
swaps it out with a new fork of BraviaRC called python-bravia-tv.
This captures all bug fixes from BraviaRC release 3.7 (previously
linked backend) to right before BraviaRC breaks when used by home-assistant.
The intent of forking is to be able to continue supporting home-assistant.
This is not intended to be a one off solution; this new fork will have
future updates and be maintain as needed.
This initial commit of python-bravia-tv improves the import process,
however overall preserves the original API.
Other fixes include:
* Fix set-volume slider
* Better error handling
* Increase input options
Resolves: #26351, #30964
See also: #12577, #14843, #17345, #18245
* KEF: add support for play, pause, next track, and previous track
* bump aiokef to 0.2.7
* run isort
* do not dynamically change the supported features
* Added lock support for tahoma
* Fixed logging to conform with pylint W1201 and E1205.
* Implemented @springstan suggestions.
* Fixed a typo...
* Implemented @springstan suggestions (v2).
* Implemented @springstan suggestions (v3).
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Fix auto_bypass in alarmdecoder
* Address review comments: used dict[key] and renamed variable
* Use dict[key] for required or optional config keys with default values
* Refactor Hue Lights to use DataCoordinator
* Redo how Hue updates data
* Address comments
* Inherit from Entity and remove pylint disable
* Add tests for debounce
* Rewrite UniFi integration to use push messaging
* Add signalling for new clients/devices
* Update list of known wireless clients when we get events of them connecting
* Reconnection logic for websocket
* Fix failing tests
* Bump requirement to v12
* Add new tests
* Update homeassistant/components/unifi/controller.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Register on HA stop event to gracefully shutdown HomematicIP Cloud connections
* fixes after review
* Fix lint
* switch to unload_entry
* Save listener
* Switch back to hap.async_reset()
* add media player test and update media player logic to qualify vizio for platinum quality score
* add SCAN_INTERVAL and log message once when device goes from available to unavailable and vice versa
* move test constants into one file to avoid defining dupes in each test file
* move constant to shrink diff
* move pytest fixtures to conftest.py
* remove commented out code
* move unload test to test_init
* updates to tests and logging based on review
* bypass notification service
* add fixture so component setup makes it through config flow
* split failure tests into two
* fix setup and entity check for test_init and setup failures in test_media_player
* make domain references consistent across test files
* remove logging steps that were introduced to help debug
* move common patches out to new fixture and use config entry everywhere appropriate
* fix docstring
* add test for update options to increase code coverage
* add one more assert
* refactor test_media_player to move boiler plate logic out of each test into _test_init function
* final refactor of test_media_player to move repeat logic into separate function
* update docstrings
* refactor setup failure tests to move shared logic into private function
* fix last new functions code to use variable instead of static config variable
* remove trailing comma
* test that volume_step gets properly passed to Vizio volume function
* fix comment language
* assert with unittest.mock.call in _test_service and use config_entries.async_setup instead of config_entries.async_add
* replace config_entries.async_add with config_entries.async_setup everywhere
* simplify if statement for argument assertion
* fix logging based on style guide
* remove accidentally committed changes
* update scan interval to something more reasonable and add tests for availability changes
* change filter function to list comprehension, simplify log messages, remove default entity id from logs since it is user configurable, fix docstrings
* Added support for the opening and closing states to MQTT covers
* Processed PR feedback on MQTT cover changes
* Add missing MQTT abbreviation to fix failing tests
* Fixed typo in MQTT abbreviations
* Added mqtt set cover position optimistic test
"adguard_home_addon_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}. Actualice su complemento Hass.io AdGuard Home.",
"adguard_home_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}.",
"existing_instance_updated":"Se actualiz\u00f3 la configuraci\u00f3n existente.",
"single_instance_allowed":"Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
"adguard_home_addon_outdated":"Den h\u00e4r integrationen kr\u00e4ver AdGuard Home {minimal_version} eller senare, du har {current_version}. Uppdatera ditt Hass.io AdGuard Home-till\u00e4gg.",
"adguard_home_outdated":"Den h\u00e4r integrationen kr\u00e4ver AdGuard Home {minimal_version} eller senare, du har {current_version}.",
"already_configured":"D\u00ebs Koordinate si schon registr\u00e9iert."
},
"error":{
"invalid_api_key":"Ong\u00ebltegen API Schl\u00ebssel"
},
"step":{
"user":{
"data":{
"api_key":"API Schl\u00ebssel",
"latitude":"Breedegrad",
"longitude":"L\u00e4ngegrad"
},
"description":"Loft Qualit\u00e9it an enger geografescher Lag iwwerwaachen.",
"title":"AirVisual konfigur\u00e9ieren"
}
},
"title":"AirVisual"
},
"options":{
"step":{
"init":{
"data":{
"show_on_map":"Iwwerwaachte Geografie op der Kaart uweisen"
},
"description":"Verschidden Optioune fir d'AirVisual Integratioun d\u00e9fin\u00e9ieren.",
"title":"Airvisual ariichten"
}
}
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
