* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bravia-tv version bump
* Fix Auth Cookies
- Fix authentication cookie expiration.
- Remove obsolete error handling (since bravia-tv==1.0.2)
- Remove obsolete mac address references. (since bravia-tv==1.0.2)
- Update tests.
* fix async_refresh_playing_info
* Improve code format
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Config_entry needs mac address for HA restart
This was mistakenly taken out. Home-Assistant needs to store mac address in
case restarted. TV needs to be on to acquire mac address. This is neccesary
to allow TV to be turned on by Home-Assistant after Home-Assistant is
restarted.
* Skip update() during state changes
It is best for performance to skip updates during state change because
bravia.turn_on() will commonly push async_update() beyond it's update
interval.
* update tests
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* 0.2.0 of the btsmarthub_devicelist package makes it compatable with BT's home hub 2.
The API has changed in the new version so this change also makes the component code compatible with the changes to the library.
* Update homeassistant/components/bt_smarthub/device_tracker.py
Co-Authored-By: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/bt_smarthub/device_tracker.py
Co-Authored-By: Franck Nijhof <frenck@frenck.nl>
* Remove dep on config in BTSmartHubScanner
This should make BTSmartHubScanner easier to test as you can pass in a mock smarthub_client
* Black format bt_smarthub
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Add support for Lutron Keypad LEDs
* Removed unneeded attribute definitions
* Pull initial state from Lutron on startup
* Format updates per code review
* Altered caching code to only fetch state if needed
* Update homeassistant/components/lutron/switch.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Cloud pylint is also offended by this ;)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update state after adding a new torrent
* Use cached torrents list in check_started_torrent_info
* Add torrent_info to all sensors
* Add torrent_info for active torrents
* Fix typo
* Update codeowners
* Do not set eta if it's unknown
* Fix codeowners
* Extract TransmissionSpeedSensor
* Extract TransmissionStatusSensor
* Extract TransmissionTorrentsSensor
* Refactor device_state_attributes() and update()
* Remove unused methods
* Use async_on_remove
* Fix sensor update
* Add transmission.remove_torrent service
* Add transmission_removed_torrent event
* Fix naming
* Fix typo in services.yaml
* Added support for white value in Template Light integration.
* Tests now working.
* Clean up
* Make template more robust
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Islamic Prayer Times config_flow
* Add Islamic Prayer Times config_flow
* handle options update and fix tests
* fix sensor update handling
* fix pylint
* fix scheduled update and add test
* update test_init
* update flow options to show drop list
* clean up code
* async scheduling and revert state to timestamp
* fix update retry method
* update strings
* keep title as root key
* Fix serial integration connection stability
Retry to connect if serial device is not available on start, or connection is lost.
Added some more log entries upon connection or when errors are encountered.
* Updated code based on review
* Fixed exception indentation
* Handle SerialException
* Sort imports
* Update homeassistant/components/serial/sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/serial/sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* More clean up
* Format and delint
* Extract error handler
* Clean up stop handler
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move removal of sensor entities into a base class
* Fix martins comments on sensors
* Reflect sensor changes on device_tracker platform
* Reflect sensor changes on switch platform
* Improve layering
* Make sure to clean up entity and device registry when removing entities
* Fix martins comments
* HomeKit: Store generated aid against unique_id where possible
* Fix conflict
* Fix max accessories check
* homekit counts the bridge as an accessory
* Add coverage for aidmanager
* prepare for merge
Co-authored-by: J. Nick Koston <nick@koston.org>
nad_receiver received a few fixes in 0.0.12, which enables the integration
for me. I assume it may depend on the receiver model, but my receiver only reports
mute state and volume when it's on, while the library used to assume to always
get a reply. With 0.0.11 the nad integration simply excepts on startup,
after bumping the version up it works.
Fixes this:
2020-04-18 22:59:38 ERROR (MainThread) [homeassistant.components.media_player] nad: Error on device update!
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 324, in _async_add_entity
await entity.async_device_update(warning=False)
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 476, in async_device_update
await self.hass.async_add_executor_job(self.update)
File "/usr/local/lib/python3.7/concurrent/futures/thread.py", line 57, in run
result = self.fn(*self.args, **self.kwargs)
File "/usr/src/homeassistant/homeassistant/components/nad/media_player.py", line 195, in update
if self._nad_receiver.main_mute("?") == "Off":
File "/usr/local/lib/python3.7/site-packages/nad_receiver/__init__.py", line 71, in main_mute
return self.exec_command('main', 'mute', operator, value)
File "/usr/local/lib/python3.7/site-packages/nad_receiver/__init__.py", line 62, in exec_command
return msg.decode().strip().split('=')[1]
IndexError: list index out of range
* Remove side effects from properties
* Remove redundant return value in async_send_command
* Move callback registeration to async_added_to_hass
* Code cleanup for roomba
* Add device type
* Use snake_case for devtype
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Validate device type as positive int
* Add device type 0x5f36 to switch
* Use default type for sensors
* Add RM4 to switch platform
* Use snake_case for devtype
* Support multiple types of remote
* Validate ip address
* Improve code readability
* Add const.py to .coveragerc
* Use None for unknown device types
* Fix sensors and standardize platform schemas
* Fix if statement
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Fix signal collision in tado with multiple accounts
Tado signals were not unique enough to prevent collisions
between accounts with the same zone ids.
* Bump upstream to fix multiple tado accounts
* switch signal undo to async_on_remove
* Bump version now that upstream is released
* bump python-tado
* While its only the dep that changed since the last run, best to force another CI to be sure
* Add Braava support to iRobot Roomba component
* Replace async_add_job with async_add_executor_job in roomba
* Improve readability in roomba
* Improve error handling in roomba
* Cleanup async_update in roomba
* Split into multiple files in roomba
* Hide protocal details in braava
* Switch to push in braava
* Bump roombapy version to 1.5.1
* Add roomba files to .coveragerc
* Fix typo
* Remove side effects from init in roomba
* Implement StateVacuumDevice in Roomba
* Add IRobotEntity base class to braava
* Fix state in roomba
* Add @shenxn as a codeowner of braava
* Updating the panasonic_viera component
* Updating .coveragerc
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Update strings.json
* Rebasing
* Updating the panasonic_viera component
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Adding pt-BR translation
* Removing Brazilian Portugues translations
* Modifying error handling
* Adding SOAPError to except handling
* Updating translation
* Refactoring async_step_import
* Fixing indentation
* Fixing requirements after rebase
* Fixing translations
* Fixing issues after rebase
* Routing import step to user step
* Adding myself as a codeowner
* Extend knx brightness with rgb brightness if brightness addresses are not supported
* Fix explicit return value
* Check for None
* Remove not needed check
* Disable false positive pylint warning
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix emulated_hue brightness off by one
Hue uses a max brightness of 254, Home Assistant
uses a max brightness of 255. Values > 127 were
off by one.
* use constant
* fix test
* add debug
* Revert "add debug"
This reverts commit 242220a02e.
* verify that the config in hass is not empty
* changed to use MockConfigEntry
* Update tests/components/ios/test_init.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/ios/test_init.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* changed the test per suggestions
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* Allow disable wired bug work around
* Move small improvements from closed PR #34065
* Fix failing test
* Add new test
* Some extra logging
* Harmonize log outputs
* Add config flow string
* Fix Balloobs comments
* Add device tracker based on arris-tg2492lg
* Return name of device and update version of arris_tg2492lg
* Update CODEOWNERS, requirements_all.txt and .coveragerc
* Change default url to host
* Use f-strings
Co-Authored-By: Franck Nijhof <frenck@frenck.nl>
* Clean up
* Fix formatting
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add config flow to nws and remove yaml
* Don't duplicate scan_time
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Use _abort_if_unique_id_configured
Co-Authored-By: J. Nick Koston <nick@koston.org>
* fix abort
* Add unavailable tests
* update and use better strings
* lint
Co-authored-by: J. Nick Koston <nick@koston.org>
* maxcube: Make it possible to return to auto mode
It's currently not possible to switch back to auto (schedule) mode after
changing to manual or vacation. Add `PRESET_NONE` to list of presets
that will return thermostat back into auto (schedule) mode.
Additionally, use `PRESET_AWAY` instead of custom preset name for
vacation mode.
* maxcube: Provide `hvac_action` based on valve state
Not supported for wall thermostats.
* maxcube: Add support for Comfort, Eco, Off and On modes
Off is mapped to HVAC_OFF, while On - to HVAC_HEAT.
* maxcube: Add `hvac_action` support for wall thermostats
We check all thermostats in the same room as the wall thermostat. If at
least one of them has its valve open - the room is being heated.
* maxcube: Expose valve position as state attribute
Also fix a small logical error in `hvac_action`.
* maxcube: Fix linter errors and formatting
* maxcube: Adjust mapping between MAX! and HA modes and presets
MAX! 'Manual' mode now corresponds to 'Heating' mode of HA. MAX! 'Eco'
and 'Comfort' temperatures are 'Heating' mode presets. MAX! 'On' mode is
now a 'Heating' preset, too.
* maxcube: Address review comments
* Prevent a single accessory setup failure from breaking all HomeKit accessories
Raise the max devices to 150 as the spec allows for this
many. Previously 100 made sense because of the event
storms when homekit started would sometimes break pairing,
as these have largely been fixed in 0.109 (still a few
to cleanup) using the HAP spec limit of 150 is now possible.
* Handle both failure states
* Convert homekit fans to use service callbacks
* Convert homekit fans to use service callbacks
Service callbacks allow us ensure that we call
fan services in the correct order.
* Avoid calling turn_on if a speed is sent and the device is on
* Fix test to not leave files behind
* Fix test
* Update homeassistant/components/homekit/type_fans.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Set homekit alarm/sensor/switch state as soon as possible
This change is part of a multi-part effort to fix the
HomeKit event storms on startup.
Previously we would set the states after HomeKit
had started up which meant that when the controller
client connected it would request the states and get
a list of default states so all the initial states
would always be wrong. The defaults states generally went
unnoticed because we set the state of each HomeKit device
soon after which would result in an event storm in the log
that looked like the following for every client and every
device:
Sending event to client: ('192.168.x.x', 58410)
Sending event to client: ('192.168.x.x', 53399)
Sending event to client: ('192.168.x.x', 53399)
To solve this, we now set the state right away when we
create the entity in HomeKit, so it is correct on
initial sync, which avoids the event storm. Additionally,
we now check all states values before sending an update
to HomeKit to ensure we do not send events when nothing
has changed.
* pylint
* Fix event storm in covers as well
* fix refactoring error in security system
* cover positions, now with constants
* Add NUT tests for an Eaton 5E650I UPS
* add a test to make sure multiple ups get setup
* Add a few more upses
* fix missing status key
* cover
* Force CI run
* fixed what seems to be a typo
* added load_mock_device in common.py so it loads all the required things into the mocks
so they don't throw exceptions for mocks not being able to convert to int
* reverted change in homeassistant/components/dyson/sensor.py
added both values to the mock device (volatil and volatile)
* Allow async_setup changes to config entry data be taken into account
* Fix tests
* Limit scope try…finally
* Update tests/test_config_entries.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Fix import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Run scripts
* Improvement strings
* Fix FlowOptions update listener
* Update .ceveragerc
* Add tests
* Better strings
* Add test for OptionsFlow
* Run gen_requirements_all.py once again
* Fix pylint errors
* Log error when there is no bravia.conf file during import
* Improvement strings
* Use braviarc object from hass.data in options flow
* Use async_add_executor_job for IO
* Fix options flow test
* Fix tests
* Remove host_reachable method
* Remove dependencies
* Change setup_platform method to async
* Remove calling system_info
* Save mac in the config entry
* Fix get ignore sources
* Fix read config from file
* Remove the side effect from init
* Fix user_input for user step
* Switch OrderedDict to dict
* New config_entry instance for each test
* Revert change
* Patch async_setup_entry in test_import
* Change a way to create source list
* Consolidate repeated block of code
* Update tests
* Suggested change
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested channge
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested change
* Patch async_setup_entry
* Remove unnecesary if
* suggested change
* Suggested change
* Fix tests
* Fix pylint error
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
In order to make this automatically discoverable via the registry
there needs to be a DEVICE_CLASS_BATTERY_CHARING in binary sensor
so we can tell what is a battery and what is a charge sensor.
* Reduce loss of precision when setting light percent brightness
This part of an effort to fix all the round trip light
brightness percentages that cause errors with homekit
, alexa, and other devices that use percentage.
* fix demo light test
* Move consts to const, general cleanup
* Add unique id
* Add default icon
* Set supported features based on sound output
* Update homeassistant/components/webostv/media_player.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Set device class
* Add software_info to client mock
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Implemented snapcast latency attributes
* Code review changes and Snapcast maintenance
Updated how entity services get called - now conforms to most
current method
* Cleanup tasks
Moved constants into separate file
Removed unnecessary logger message
Remove unnecessary schemas
* FIx linting errors
* Sort imports
* Update with requested change
Better - use next()
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Add guards for bad service calls
* Add back in platform schema
* Add check for unjoin service call
* Fix lint/format
* remove comma inserted by black
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Convert sense to use DataUpdateCoordinator for trends
* remove unused
* request update right away
* clarify
* call async refresh later
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
* Move DOMAIN to .const in line with examples.
* Move to async_setup
* Simplify code using new features of total-connect-client 0.51
* First crack at config flow for totalconnect
* bump totalconnect to 0.52
* use client.is_logged_in() to avoid total-connect-client details.
* updated generated/config_flow.py
* use is_logged_in()
* Hopefully final touches for config flow
* Add tests for config flow
* Updated requirements for test
* Fixes to test_config_flow
* Removed leftover comments and code
* fix const.py flake8 error
* Simplify text per @Kane610 https://github.com/home-assistant/home-assistant/pull/32126#pullrequestreview-364652949
* Remove .get() to speed things up since the required items should always
be available.
* Move CONF_USERNAME and CONF_PASSWORD into .const to eliminate extra I/O
to import from homeassistant.const
* Fix I/O async issues
* Fix flake8 and black errors
* Mock the I/O in tests.
* Fix isort error
* Empty commit to re-start azure pipelines (per discord)
* bump total-connect-client to 0.53
* Update homeassistant/components/totalconnect/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/totalconnect/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixes per @balloob comments
* Fix imports
* fix isort error
* Fix async_unload_entry
It still referenced CONF_USERNAME instead of entry.entity_id
* Added async_setup so not breaking change. Fixed imports.
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove TotalConnectSystem() per @MartinHjelmare suggestion
* Moved from is_logged_in() to is_valid_credentials()
The second is more accurate for what we are checking for, because is_logged_in() could return False due to connection error.
* Fix import in test
* remove commented code and decorator
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix test_config_flow.py
* bump total-connect-client to 0.54
* remove un-needed import of mock_coro
* bump to total-connect-client 0.54.1
* re-add CONFIG_SCHEMA
* disable pylint on line 10 to avoid pylint bug
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Convert homekit thermostats to use service callbacks
Service callbacks allow us to get all the temperature
changes in one request so we can avoid all the
need to store state and debounce.
* remove excess debug
* Fix lock and light tests
* Ensure all code for Thermostats has coverage
* I am answering all the homekit cases anyways so might as well be aware of regressions
* Make lock notifications reliable
* Update homeassistant/components/homekit/type_lights.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Handle all zero serial numbers in NUT
* Add additional nut tests
* Update homeassistant/components/nut/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* remove re
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add test and fix tests for update logging.
* Fix update logging.
* Remove assert is True
* guard against platform config and use async_write_ha_state
* fix discovery info passing to platform
* Improve testing for entities in init
* Fix reversed door closing/opening states in HomeKit
When we closed the door we would set state 2 which
is "Opening" it should have been 3 which is
"Closing"
When we opened the door we would set state 3 which
is "Closing" it should have been 2 which is
"Opening"
Add constants to make this easier to catch
in the future.
* Remove debug
* Add note about target door state
* deCONZ support for new device trigger for Feller EDIZIOdue Friends of hue Switch
* Rename to general name -friends of hue switch
* translation for top and bottom buttons
* add pyserial to manifest
pymodbus is very developer oriented and assumes every developer
adapt the requierements.txt to his/hers needs.
Our requirements.txt is different it contains all posibilities allowing
user to later change configuration without having to install extra
packages.
As a consequence manifest.json needs to include the pyserial.
* modbus: make truly async client creation
Make hass call listen_once async.
Integrate content of start_modbus into async_setup.
Do not use the boiler plate create tcp client function from
pymodbus as it is sync, and also does not work well with asyncio,
instead call the init_<type> directly, since that is async.
* both component/modbus and component/serial uses pyserial-async
but with slighty different version requirements.
Combined the 2.
* Review 1
* Review 2
* Review
@staticmethod is no good, because the function uses class variables.
* Review
Pytest is sometimes a bit cryptic, lets hope this does it.
* Add homekit configuration option to bind to default interface
Homekit can fail to be discoverable because the
zeroconf default is to bind to all interfaces
(InterfaceChoice.All). This does not work
on some systems and (InterfaceChoice.Default) which
binds to 0.0.0.0 is needed for homekit to zeroconf
to function.
A new option is available for homekit
zeroconf_default_interface: true
* Update tests
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Review items
* has a default
* Revert "has a default"
This reverts commit 24ecf0920f.
Breaks the tests
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Clean up demo camera
* Complete test_motion_detection
* Clean up image reading
* Clean up camera integration async methods
* Fix and clean camera integration tests
* Fix image processing patch
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* syntax for mac (pyupgrade)
* Change single key to BLID
* Resolve dict conflict
* Update homeassistant/components/roomba/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add description
* Revert "Remove test config flow"
This reverts commit 26a89422e8.
* Add tests
* Remove check if user none
* Replace CONF_USERNAME to CONF_BLID (breaking change)
* Update test_config_flow.py
* Add code owners
* Remove CONF_USERNAME (unused)
* Add multiple vacuum
* Add multiple vacuum
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix syntax name
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove CONF_PREFIX (unused)
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add import UNIT_PERCENTAGE
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add last_user_name to alarm device_state_attributes
changed_by_entity_id was removed in 0.108 and replaced
with changed_by_keypad. This didn't provide enough
data to discover the last user that changed the alarm.
* Switch to changed_by and restore since
we loose the attributes on restart
* use built-in
* Add support to the Econet integration for new attributes: lower_temp, upper_temp, ambient_temp & is_enabled
* Removing support for ambient temperature
* Rewrite parts of upnp component
* Linting
* Add SCAN_INTERVAL
* Get values simultaneously
* Move to time related constants, as per #32065
* Linting
* Move constant KIBIBYTE to homeassistant.const
* Simplify code
* Fix tests for #33344
* Changes after review
* Update homeassistant/components/upnp/sensor.py
* Changes after review
* Formatting
* Formatting
* Use ST from discovery info to avoid swapping device_types if device advertises multiple versions
* Linting
* Requirements for upnp + dlna_dmr components
* Linting
* Regen requirements
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
* Formatting
* Linting
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* added the ability to mock a "long poll" get request by setting up the
waiting request and feeding responses to it
with this, refactored the qwikswitch test so it doesn't use global variables
and is more understandable and maintainable
* added import asyncio from merge
* added assert that first call with long_poll has empty content
* passing json instead of the binary string
* use json instead of text in mock requests
* refactored to use a proxy
* return the proxy also for the http methods other than get
* refactored so any side_effect can be used and created the long_poll side effect
* simplified by using kwargs
needed to move the json->text->content logic from mocker to mockrequest
* no need to explicitly define method and url
* HS220 dimmers are handled as lights with a limited feature set
* Dimmers look up has has_emeter every call so this is cached as well now
to resovle the performance issue.
* Improve Plex debounce/throttle logic
* Use Debouncer helper, rewrite affected tests
* Mock storage so files aren't left behind
* Don't bother with wrapper method, store debouncer call during init
* Test cleanup from review
* Don't patch own code in tests
* solve modbus issue #33872
CONF_DELAY was used in a serial connection, which is not
permitted.
Sometimes async_update is called after async_setup is completed,
but before event EVENT_HOMEASSISTANT_START is issued, leading to
a missing object.
* resolve review comment.
Do not wait for start event, but activate pymodbus directly in
async setup.
* review 2
Remark, this does not work, async_setup hangs.
clean start_modbus() from async calls, leaving only the pymodbus
setup.
* review 2a
Moved listen_once back to start_modbus, since it is sync.
* fix bug when search for string in dict fails when dict is null
* another bug fix that I only noticed because of this other bug
* add test to cover failure scenario
* update docstring
* add additional assertions to cover failure scenario that's being fixed
* Add a config flow for flume
* Sensors no longer block Home Assistant startup
since the flume api can take > 60s to respond on
the first poll
* Update to 0.4.0 to resolve the blocking startup issue
* Missed conversion to FlumeAuth
* FlumeAuth can do i/o if the token is expired, wrap it
* workaround async_add_entities updating disabled entities
* Fix conflict
Sometimes a modbus server do not respond to a transaction,
this is a contradiction to the modbus protocol specification,
but merely a matter of fact.
Use asynio.await_for() to provoke a timeout, and close the
transaction.
Some providers have set their wait_timeout to 60s
in order to pack as many users as they can on a machine.
The mysql default is 28800 seconds (8 hours)
Since mysql connection build and tear down is relativity
expensive, we want to avoid being disconnected.
We now accommodate this scenario with the following:
1. Raise the mysql session wait_timeout 28800 when we connect
2. The event session now does a 30 second keep alive to
ensure the connection stays open
* Speed up TP-Link lights
* Color temp kan be None
* hs as int, force color temp=0
* Fix color temp?
* Additional tplink cleanups to reduce api calls
* Update test to return state, remove Throttle
* Fix state restore on off/on
* Fix lights without hue/sat
Co-authored-by: J. Nick Koston <nick@koston.org>
* Load integrations with requirements in device_automation
- Split cached loader behavior out of async_get_integration
- Use cached loader for both async_get_integration and
async_get_integration_with_requirements
- Use async_get_integration_with_requirements for device_automation
resolves#33104
* Duplicate caching logic in requirements, remove loader mods
* Update homeassistant/requirements.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use asynctest patch instead of mock_coro
* Add test for supervisor ip ban
* Do not ban supervisor ip if set
* Extract supervisor ip helper
* Check supervisor ip before banning
* Remove added blank line
* Clean up get supervisor ip
Co-Authored-By: Pascal Vizeli <pvizeli@syshack.ch>
Co-authored-by: Pascal Vizeli <pvizeli@syshack.ch>
* Convert nut to a multi step config flow
* Users can now choose the ups they want in
step 2 (or skipped if only one)
* Users can now select the resources they want
to monitor based on what is actually available
on the device
* CONF_NAME has been removed as we now get the
name from NUT
* Device classes have been added which allows
the battery charge state to be seen in the
devices UI
* Remove update_interval as its for a followup PR
* explict
* reduce
* fix bug, add tests for options flow
* Test for dupe import
* Test for dupe import
* Call step directly
* Update homeassistant/components/nut/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* convert nws to component configuration
* add more debug logging
* remove assumed state
* move initialization of data into init
* refactor update logic
* use forecast success for checking available entities
* Split unique_id into more usable pieces.
use a base_unique_id for each entry. Add domain for signaling to entities. Each entity in each platform can use base_unique_id to form individual unique_id's.
* Revert "move initialization of data into init"
This reverts commit 09eb0220469285b10f0500f5f6def67415931a81.
* add silver quality scale to manifest
* unsubscribe listener in will_remove_from_hass
* initialize _unsub_listener in __init__
* use async_on_remove
* remove scan interval from configuration
* Use better name
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add discovery support to synology_dsm
* Remove debug
* black
* Fix mocks
* Merge strings
* Move placeholders
* add missing placeholders
* reorder
* use constants in test
* Remove CONF_NAME (only displayed in discovery now)
* test reduction
* Shorten long name
* Use name for name but NOT for unique_id, remove CONF_NAME from yaml config
* Use Synology for the name for now, hopefully we can use the hostname later
* lint
* Remove name from strings
* remove =None
* show login errors at username field
* Update tests/components/synology_dsm/test_config_flow.py
Co-Authored-By: Quentame <polletquentin74@me.com>
* Update tests/components/synology_dsm/test_config_flow.py
Co-Authored-By: Quentame <polletquentin74@me.com>
* Update homeassistant/components/synology_dsm/const.py
Co-authored-by: Quentame <polletquentin74@me.com>
* used coroutinemock to avoid exception
* added spec to mock to remove exception
* added the current_user return value so it doesnt throw exception
* fix the mocks so properties do not need .return_value
* fixed missing mock values that were causing exceptions
* moved patch to asynctest so no need to define m_init
* fixed black error
* update common test for modbus integration
* remove log messages from modbus setup function.
* Make global method local
* Change parameter name to snake_case
* Added support for the Pi4ioe5v9xxxx binary IO expanders.
* Correction for black failure
* Correction for black failure
* Fix for manifest.json
* Fix for flake8 fault missing a period
* Some modifications I made during tests seem to be disapeared, fixed flake8 and black test now
* WIP virtual thermostat
* WIP virtual thermostat
* WIP
* 100% tests coverage
* Manifest, codeowners, typo fix
* Lint problem
* Test file blacked
* Add a test case for b4dpxl's question
* Update CODEOWNERS
* Replacement of generic thermostat
* Cleaning
* Lint
* More lint
* Using external PyPI package, removed get()
* Fix flake8 checks
* removed virtual thermostat
* Re-fix black & isort
* Re-fix isort 2
* Update homeassistant/components/pi4ioe5v9xxxx/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* black for switch
* update to latest version manual merge
* Delete test_generic_thermostat.py
* Delete .gitignore
* Delete climate.py
* Delete manifest.json
* Delete test_climate.py
* Delete test_climate.py
* fix thermostat interference
* fix thermostat interference 2
* Fix pylint
* Update .pre-commit-config.yaml
Co-authored-by: Cyril <cyril.dubus@effipilot.com>
Co-authored-by: Niflou <dubuscyr@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Skip parsing session if incomplete
* Schedule an update if session data is incomplete
* Mark as callback
* Remove update() & convert to async, abort if any session is incomplete
* replaced MagicMock with CoroutineMock to avoid exception
* added conversion to str so mock returns unique-id that doesn't throw json exception
* added non-empty config since hass throws exception when config is empty
* MQTT Alarm Control Panel to have all available states
* MQTT Alarm Control Panel to have all available states
* test_arm_custom_bypass_* tests added
* MQTT payload_arm_custom_bypass abbreviation
Since all entity test functions are going to use
the modbus class, isolate the common parts in
conftest.py, and thereby make it simpler to write
additional test cases.
cleaned up test_modbus_sensor.py while splitting the code.
* Add config flow to Synology DSM
* Use proper sensor unique ID from flow + sensor name
* Add description to api_version
* Add authentication flow check
* Add device_info
* Add test_login_failed test
* Bump python-synology to 0.5.0
* 0.5.0 test updates
* Use NAS S/N as config_flow unique_id
* Add missed conf disks + volumes
* Review: async_unload the async_track_time_interval
* Fix NoneType for disks or volumes
* Keep all disks and volumes forever
* Update homeassistant/components/synology_dsm/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/synology_dsm/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix "Keep all disks and volumes forever" for empty import
* Fix prettier
* Remove useless LOGGER in config flow
* Fix Synology DSM tests doing I/O
Co-authored-by: J. Nick Koston <nick@koston.org>
Home Assistant auto mode is described as
"The device is set to a schedule, learned behavior, AI."
HomeKit Accessory Protocol expects "heating or cooling to maintain
temperature within the heating and cooling threshold of the
target temperature"
Since HomeKit is expecting to set temperatures in this mode,
mapping homekit state 3 ("Auto") to Home Assistant HVAC_MODE_HEAT_COOL
is more inline with how Home Assistant defines HVAC_MODE_HEAT_COOL
as "The device supports heating/cooling to a range"
* Add prettier (in pre-commit and CI)
* Make all file prettier
* Change order
* Add to Azure Pipelines
* Fix a YAML file prettier caught as invalid
* Remove flow mapping using curly braces from all YAML service files
Homekit only has Off/Heat/Cool/Auto at this time, but
at least we can prevent the device from erroring
by mapping dry and fan to cool so it continues
to function.
* Add yamllint (in pre-commit and CI)
* Fix linting for all YAML files
* Bump and add it to requirements
* Fix gen_requirements for pre-commit, remove 'v' from version
* Removal of extraneous parenthesis
* Process review suggestions
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Small code style improvements to Insteon integration
* Update homeassistant/components/insteon/utils.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* reordered the clearing of the closed Event so it can stay set at the end and not
leave a task waiting on close
* fixed the side effect so it returns one TimeoutError and after that success
Previously it reached the end of the single item list and threw an exception
* fixed the error. it doesn't happen on python 3.7.5 but CI is on 3.7.0
* fixed comment
* Handle race condition in harmony setup
If the remote was discovered via ssdp before the yaml config import
happened, the unique id would already be set and the import
would abort.
* Update homeassistant/components/harmony/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* reduce
* black
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Debounce calls to Plex server
* Simplify debounce by recommendation
* Update tests to handle debounce
* Test debouncer, fix & optimize tests
* Use property instead
* Add available property and raise exception
* Add entity available property
* Refactoring and fixes
* Refactoring and fix for multi sensor
* Bump abodepy version
Integration configuration cannot complete as it is currently looking for /states after authentication. Replacing with /lovelace to allow the script to complete after successful authentication with Automatic.
* Adding support for Mi AirPurifier 3
* Adding support for Mi AirPurifier 3H
* Enabled setting fan level for AirPurifier 3/3H
* Get rid of isinstance for MIOT AirPurifier
* Bumping xiaomi-miio dependency
* Fixed lint error
* Update manifest.json
* Fixed requirements files for 0.5.0.1
Co-authored-by: Piotr Król <Piotr@gorszyportal.pl>
* Adding vera config entries support.
* Fixing lint error.
* Applying minimal changes necessary to get config entries working.
* Addressing PR feedback by further reducing the scope of the change.
* Addressing PR feedback.
* Fixing pyvera import to make it easier to patch.
Addressing PR feedback regarding creation of controller and scheduling of async config flow actions.
* Updating code owners file.
* Small fixes.
* Adding a user config flow step.
* Adding optional configs for user config flow.
* Updating strings to be more clear to the user.
* Adding options flow.
Fixing some PR feedback.
* Better handling of options.
PR feedback changes.
* Using config registry to update config options.
* Better managing config from file or config from UI
Disabling config through UI if config is provided from a file.
More tests to account for these adjustments.
* Address PR feedback.
* Fixing test, merging with master.
* Disabling all Vera UI for configs managed by configuration.yml.
Adding more tests.
* Updating config based on unique_id.
Addressing additional PR feedback.
* Rebasing off dev.
Addressing feedback.
* Addressing PR feedback.
* force_update added
As per this discussion we need to update last_changed when active timer restarted.
One way to do that is to force HA update the state on each request even if it remains the same.
More details here - https://github.com/home-assistant/architecture/issues/345
* add test for force_update
make sure state_change event fired every time timer (re)started
* remove whitespaces
* remove whitespace
* Update tests/components/timer/test_init.py
Co-Authored-By: Alexei Chetroi <lexoid@gmail.com>
* fix lint
* fix isort
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
When placeholders are in use, flow_title needs to be
set in the json to prevent an empty name in the
integrations dashboard. This affected doorbirds
that were found via ssdp.
* Async fix
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix format
* Remove from hass
* undo dispatcher
Co-authored-by: J. Nick Koston <nick@koston.org>
* add sound mode support for devices that support it
* make setting and unsetting flag better
* move eq and audio settings into constants
* fix missed statement to use constant instead of hardcoded string
* further fixes based on review
* bump pyvizio version to include newly identified app
* Switch homekit lights to use service callbacks
Service callbacks allow us to get the on/off, brightness, etc
all in one call so we remove all the complexity that was
previously needed to handle the out of sync states
We now get the on event and brightness event at the same time
which allows us to prevent lights from flashing up to 100%
before the requested brightness.
* Fix STATE_OFF -> STATE_ON,brightness:0
* Use backend-provided fan speed presets for Xiaomi vacuums
This needs input from Xiaomi vacuum owners to verify that it does not break anything.
I have personally tested this on rockrobo v1 (old mapping).
Related issues/PRs:
home-assistant/core#32821home-assistant/core#31268home-assistant/core#27268
This is a WIP as it requires a new upstream release.
The PR is https://github.com/rytilahti/python-miio/pull/643
* Bump version requirement for 0.5.0
* Bump requirements_test_all.txt, too
* Fix linting; missing setup.cfg on local checkout caused wrong settings for black..
* Add tests for both fan speed types
* Remove useless else..
* bump python-miio to 0.5.0.1 due to broken 0.5.0 packaging
* Support for returning NULL in color or temperature. Fixes#33469
* Added further support for ‘None’ returns in level template
* Removed assumption that template render may not be a string
* Streamlined code per cloud pylint
* Updates per code review suggestions
* Added improved error handling and logging for brightness
* Additional exception handling for temperature
* lib version
* unit-test refactoring
* added type hints
* added cover
* added test to see that consts have the same value as library consts
* Update tests/components/dynalite/test_init.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed trigger template
* Update homeassistant/components/dynalite/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/const.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed CONF_TRIGGER from const
corrected type hints - not clear why mypy didn't catch it
* conversion of the config to library CONFs
* moved to use the value since it should come from the library
* taking CONF_HOST from homeassistant.const instead of module const
* use dict.get
removed leftover log
* force device_class to be from homeassistant consts
* move dict.get to inline
* removed CONF from values
changed "channelcover" to "channel_cover"
* moved some CONF values out of const.py and taking them from homeassistant.const
* verifying that device class is a valid HA device class
* moved shutter to home assistant const
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Don't write storage to disk while stopping
* rework change
* lint
* remove delay save and schedule final write at stop
* update tests
* fix test component using private methods
* cleanup
* always listen
* use stop in restore state again
* whitelist JSON exceptions for later
* review comment
* make zwave tests use mock storage
If the harmony hub was not ready for connection or
was busy when importing from yaml, the import validation
would fail would not be retried.
To mitigate this scenario we now do the validation in
async_setup_platform which allows us to raise
PlatformNotReady so we can retry later.
* Handle unavailabe entities
* Remove some logging
* Set valve to lowest temp when turned off
* Remove some logging
* Address comments
* Report entity as connected if update is successful
* Fix stupidness
* Fix
"verify_ssl":"AdGuard Home \u0438\u0437\u043f\u043e\u043b\u0437\u0432\u0430 \u043d\u0430\u0434\u0435\u0436\u0434\u0435\u043d \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
"adguard_home_addon_outdated":"Aquesta integraci\u00f3 necessita la versi\u00f3 d'AdGuard Home {minimal_version} o una superior, tens la {current_version}. Actualitza el complement de Hass.io d'AdGuard Home.",
"adguard_home_outdated":"Aquesta integraci\u00f3 necessita la versi\u00f3 d'AdGuard Home {minimal_version} o una superior, tens la {current_version}.",
"existing_instance_updated":"S'ha actualitzat la configuraci\u00f3 existent.",
"single_instance_allowed":"Nom\u00e9s es permet una \u00fanica configuraci\u00f3 d'AdGuard Home."
},
"error":{
"connection_error":"No s'ha pogut connectar."
},
"step":{
"hassio_confirm":{
"description":"Vols configurar Home Assistant perqu\u00e8 es connecti amb l'AdGuard Home proporcionat pel complement de Hass.io: {addon}?",
"title":"AdGuard Home (complement de Hass.io)"
},
"user":{
"data":{
"host":"Amfitri\u00f3",
"password":"Contrasenya",
"port":"Port",
"ssl":"AdGuard Home utilitza un certificat SSL",
"username":"Nom d'usuari",
"verify_ssl":"AdGuard Home utilitza un certificat adequat"
},
"description":"Configuraci\u00f3 de la inst\u00e0ncia d'AdGuard Home, permet el control i la monitoritzaci\u00f3.",
"adguard_home_addon_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}. Opdater venligst din Hass.io AdGuard Home-tilf\u00f8jelse.",
"adguard_home_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}.",
"adguard_home_addon_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}. Bitte aktualisiere dein Hass.io AdGuard Home Add-on.",
"adguard_home_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}.",
"existing_instance_updated":"Bestehende Konfiguration wurde aktualisiert.",
"single_instance_allowed":"Es ist nur eine einzige Konfiguration von AdGuard Home zul\u00e4ssig."
},
"error":{
"connection_error":"Fehler beim Herstellen einer Verbindung."
},
"step":{
"hassio_confirm":{
"description":"M\u00f6chtest du Home Assistant so konfigurieren, dass eine Verbindung mit AdGuard Home als Hass.io-Add-On hergestellt wird: {addon}?",
"title":"AdGuard Home \u00fcber das Hass.io Add-on"
},
"user":{
"data":{
"host":"Host",
"password":"Passwort",
"port":"Port",
"ssl":"AdGuard Home verwendet ein SSL-Zertifikat",
"username":"Benutzername",
"verify_ssl":"AdGuard Home verwendet ein richtiges Zertifikat"
},
"description":"Richte deine AdGuard Home-Instanz ein um sie zu \u00dcberwachen und zu Steuern.",
"adguard_home_addon_outdated":"This integration requires AdGuard Home {minimal_version} or higher, you have {current_version}. Please update your Hass.io AdGuard Home add-on.",
"adguard_home_outdated":"This integration requires AdGuard Home {minimal_version} or higher, you have {current_version}.",
"adguard_home_addon_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}. Actualice su complemento Hass.io AdGuard Home.",
"adguard_home_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}.",
"existing_instance_updated":"Se actualiz\u00f3 la configuraci\u00f3n existente.",
"single_instance_allowed":"Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
},
"error":{
"connection_error":"Error al conectar."
},
"step":{
"hassio_confirm":{
"description":"\u00bfDesea configurar Home Assistant para conectarse a la p\u00e1gina principal de AdGuard proporcionada por el complemento Hass.io: {addon}?",
"title":"AdGuard Home a trav\u00e9s del complemento Hass.io"
},
"user":{
"data":{
"password":"Contrase\u00f1a",
"port":"Puerto",
"ssl":"AdGuard Home utiliza un certificado SSL",
"username":"Nombre de usuario",
"verify_ssl":"AdGuard Home utiliza un certificado adecuado"
},
"description":"Configure su instancia de AdGuard Home para permitir la supervisi\u00f3n y el control.",
"adguard_home_addon_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, usted tiene {current_version}. Por favor, actualice su complemento Hass.io AdGuard Home.",
"adguard_home_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, usted tiene {current_version}.",
"existing_instance_updated":"Se ha actualizado la configuraci\u00f3n existente.",
"single_instance_allowed":"S\u00f3lo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
},
"error":{
"connection_error":"No se conect\u00f3."
},
"step":{
"hassio_confirm":{
"description":"\u00bfDesea configurar Home Assistant para conectarse al AdGuard Home proporcionado por el complemento Hass.io: {addon} ?",
"title":"AdGuard Home a trav\u00e9s del complemento Hass.io"
},
"user":{
"data":{
"host":"Host",
"password":"Contrase\u00f1a",
"port":"Puerto",
"ssl":"AdGuard Home utiliza un certificado SSL",
"username":"Nombre de usuario",
"verify_ssl":"AdGuard Home utiliza un certificado apropiado"
},
"description":"Configure su instancia de AdGuard Home para permitir la supervisi\u00f3n y el control.",
"adguard_home_addon_outdated":"Cette int\u00e9gration n\u00e9cessite AdGuard Home {minimal_version} ou une version ult\u00e9rieure, vous disposez de {current_version}. Veuillez mettre \u00e0 jour votre compl\u00e9ment Hass.io AdGuard Home.",
"adguard_home_outdated":"Cette int\u00e9gration n\u00e9cessite AdGuard Home {minimal_version} ou une version ult\u00e9rieure, vous disposez de {current_version}.",
"existing_instance_updated":"La configuration existante a \u00e9t\u00e9 mise \u00e0 jour.",
"single_instance_allowed":"Une seule configuration d'AdGuard Home est autoris\u00e9e."
},
"error":{
"connection_error":"\u00c9chec de connexion."
},
"step":{
"hassio_confirm":{
"description":"Voulez-vous configurer Home Assistant pour qu'il se connecte \u00e0 AdGuard Home fourni par le module compl\u00e9mentaire Hass.io: {addon} ?",
"title":"AdGuard Home via le module compl\u00e9mentaire Hass.io"
},
"user":{
"data":{
"host":"H\u00f4te",
"password":"Mot de passe",
"port":"Port",
"ssl":"AdGuard Home utilise un certificat SSL",
"username":"Nom d'utilisateur",
"verify_ssl":"AdGuard Home utilise un certificat appropri\u00e9"
},
"description":"Configurez votre instance AdGuard Home pour permettre la surveillance et le contr\u00f4le.",
"adguard_home_addon_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}. Aggiorna il componente aggiuntivo AdGuard Home di Hass.io.",
"adguard_home_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}.",
"adguard_home_addon_outdated":"D\u00ebs Integratioun ben\u00e9idegt AdgGuard Home {minimal_version} oder m\u00e9i, dir hutt {current_version}. Aktualis\u00e9iert w.e.g. \u00e4ren Hass.io AdGuard Home Add-on.",
"adguard_home_outdated":"D\u00ebs Integratioun ben\u00e9idegt AdgGuard Home {minimal_version} oder m\u00e9i, dir hutt {current_version}.",
"existing_instance_updated":"D\u00e9i bestehend Konfiguratioun ass ge\u00e4nnert.",
"single_instance_allowed":"N\u00ebmmen eng eenzeg Konfiguratioun vun AdGuard Home ass erlaabt."
},
"error":{
"connection_error":"Feeler beim verbannen."
},
"step":{
"hassio_confirm":{
"description":"W\u00ebllt dir Home Assistant konfigur\u00e9iere fir sech mam AdGuard Home ze verbannen dee vum hass.io add-on {addon} bereet gestallt g\u00ebtt?",
"title":"AdGuard Home via Hass.io add-on"
},
"user":{
"data":{
"host":"Apparat",
"password":"Passwuert",
"port":"Port",
"ssl":"AdGuard Home benotzt een SSL Zertifikat",
"username":"Benotzernumm",
"verify_ssl":"AdGuard Home benotzt een eegenen Zertifikat"
},
"description":"Konfigur\u00e9iert \u00e4r AdGuard Home Instanz fir d'Iwwerwaachung an d'Kontroll z'erlaben.",
"adguard_home_addon_outdated":"Deze integratie vereist AdGuard Home {minimal_version} of hoger, u heeft {current_version}. Update uw Hass.io AdGuard Home-add-on.",
"adguard_home_outdated":"Deze integratie vereist AdGuard Home {minimal_version} of hoger, u heeft {current_version}.",
"adguard_home_addon_outdated":"Denne integrasjonen krever AdGuard Home {minimal_version} eller h\u00f8yere, du har {current_version}. Vennligst oppdater Hass.io AdGuard Home-tillegget.",
"adguard_home_outdated":"Denne integrasjonen krever AdGuard Home {minimal_version} eller h\u00f8yere, du har {current_version}.",
"description":"Czy chcesz skonfigurowa\u0107 Home Assistant, aby po\u0142\u0105czy\u0142 si\u0119 z AdGuard Home przez dodatek Hass.io {addon}?",
"title":"AdGuard Home przez dodatek Hass.io"
},
"user":{
"data":{
"host":"Host",
"password":"Has\u0142o",
"port":"Port",
"ssl":"AdGuard Home u\u017cywa certyfikatu SSL",
"username":"Nazwa u\u017cytkownika",
"verify_ssl":"AdGuard Home u\u017cywa odpowiedniego certyfikatu."
},
"description":"Skonfiguruj instancj\u0119 AdGuard Home, aby umo\u017cliwi\u0107 monitorowanie i kontrol\u0119.",
"title":"Po\u0142\u0105cz AdGuard Home"
}
},
"title":"AdGuard Home"
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
