Disable expire_on_commit for the event writer. Since we never expect the
old_state_id to change in the database, it was never worth the expense of
refetching the id after the commit.
* Add service that can clean up by deCONZ orphaned entries from device and entity registry
* Fix existing tests
* Add new test
* Add some inline comment to the service
* Use camera name as device name
* Add Surveillance Station home mode switch for Synology DSM
- camera uses Surveillance Station as device parent
- camera uses camera name instead of NAS name + camera name
* Without device_class otherwise no icon
* Update .coveragerc
* Update zha.permit schema to support install code
* Move install code to core helpers
* QR code converter for enbrighten
* Fix schemas
* Update test for permit service
* Refactor zha.permit to accept install codes
* Test zha.permit from QR code
* Fix regex for Embrighten QR code
* Add regex for Aqara QR codes
* Add Consciot regex for QR code
* Reuse test params for WS tests
* ZHA WS permit command with install code
* Tests for zha.permit WS service
* Refactor zha.permit and zha.remove service to use ATTR_IEEE for the address
* Make pylint happy
* Deprecate only ieee_address param for now
* Add test coverage of binary sensor.
Update conftest to be generic.
* Pass total config structure to run_base_test.
Simple devices like sensor/switch do only have one entry in the
dict array, whereas e.g. switch have multiple entries.
* Use STATE_ON / _OFF for binary_sensor test.
* Update coveragerc
Only exclude files that uses a third party library.
* Remove modbus/* from coveragerc
* Remove modbus from .coveragerc
* Update .coveragerc
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
The Default Values Suggest That The User enters 'light' as a parameter for the theme name. 'Light' is, however, not a valid option on a fresh install of HA unless a user manually downloads a theme with the name 'light'.
* Use set not list
* Events are not entities
* Don't await unload_events
* Remove checks of entities content in tests
* List to set comprehension
* Why is it so hard to remember that sets arent parenthesis...
* Add Modbus cover
* Fix improper commands written for Modbus cover via coil
* Make changes per review comments
* Fix default hub not defined
Since support for multiple hubs was added, the default hub option
was not implemented correctly. Now I added necessary logic to make
it work. First hub in a list will be used as a default hub.
* Move Cover config under Modbus section
* Revert setting up a default hub alias
* Make hub mandatory for Cover
* Add default scan interval
* Read scan_interval from discovery info
* Fix linter error
* Use default scan interval from Cover platform
* Handle polling for Modbus cover directly inside entity
* Move covers under hub config
* Fix for review comment
* Call update() from Cover actuator methods
* Fix time validation
* Store all entities in dict
* Use stored unique id to select if to create entity or not
* Remove unnecessary init
* Change so same physical sensor doesnt try to create multiple battery sensors
Change so groups get created properly
* Add controls in tests that entities are logged correctly
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add more units and device classes
* Battery level is a value beteen 0 and 9 where 9 indicate full
Actual 0 battery can't occur since since then we would get to signal
* Adjust tests
* Add wind direction and adjust rain rate
* Adjust data types to be None rather than empty string
* Set counter values to count unit
* Forgotten unit
Since most of the json serialize work for the websocket was done
multiple times for the same message, we can avoid the overhead
of serializing the same message many times (once per websocket
client) with a cache.
* Add logging to Bond fireplace entity for troubleshooting turn off problem
* Update homeassistant/components/bond/light.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/bond/light.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Updates xknx to 0.14.0
* Review: Explicity add state attributes to weather device
* Review: Remove state attributes from weather device
* Review: Add `counter` as a state attribute to binary_sensors
* Add binary_sensor for cloud connectivity to HomematicIP Cloud
* Fix Test
* Remove device_class
* Switch from _device to _home
* Switch from _device to _home for sensor
* Added UniFi Uptime sensor
Added the UniFi uptime data as a sensor. Untested.
* Update sensor.py
Updated code as a result of the tests.
* Changed timestamp format and device class
Converted state to iso timestamp and changed device class to DEVICE_CLASS_TIMESTAMP.
* Updated unit of measurement to None
* Added import
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed whitespace
* Added the uptime sensors option to the config flow
* All the unit tests should be there now
* Whoops
* Fixed translation
* Properly formatted the code
* Flake8 really has angel eyes
* Black should also be satisfied now
* Should have satisfied all static code analysis tools
* Fixed add uptime sensor function
* Fixed overintendation
* Fixed unit tests
* Made a spelling mistake during editing of unit tests
* Test verifies if utc time is correct
* Converted to iso format
* Converted unit test to iso format
* Unit test sensor json had the wrong uptime name
* Added options_updated handler
* Fixed remove sensors unit test
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Update test_device_tracker.py
Removed uptime from the devices
* Fixed black formatting issue
* I think the code coverage should be good now
* Trying to add the sensors again
* Using signals to hopefully trigger the controller to add them again
* Forgot import
* Sorted components
* fixed isort comments
* Removed CLASS and DEVICE_CLASS
* Added TYPE again
* Removed double underscores
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Fix pilight lights would always turned on at max brightness instead of just turning on. Some 433mhz dimmers (like the KAKU series) remember their last brightness setting.
Fix pilight lights would not respect configured dimlevel_min
* Prompt to reauth when the august password is changed or token expires
* augment missing config flow coverage
* augment test coverage
* Adjust test
* Update homeassistant/components/august/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* block until patch complete
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move setup without devices
* Remove not needed tests
* Move set temp test
* Move set temp cool mode test
* Run black
* Move test target temperature
* Move test current temperature
* Move test current humidity
* Move test hvac mode
* Move test hvac modes
* Move test fan modes
* Move test service fan modes
* Move test fan state
* Move test supported features
* Move test idle state
* Move test humidity invalid state
* Move test humidity without state
* Move test device cool
* Rename test
* Move test set mode service
* Clean imports
* Clean strings
* Only load climate platform for climate tests
* Use http status codes and add HTTP_BAD_GATEWAY constant
* Address review comments:
- using constants in tado integration
- using constant in media_player init.py
* Add and use HTTP_ACCEPTED constant
The HomeKit spec does not permit the color temp characteristic
being exposed when color (hue, sat) is present. Since
Home Assistant will still send color temp values, we need to
convert them to hue, sat values for HomeKit
The HomeKit spec does not permit the color temp characteristic
being exposed when color (hue, sat) is present. Since
Home Assistant will still send color temp values, we need to
convert them to hue, sat values for HomeKit
* add unique_id to canary alarm_control_panel
* Update test_alarm_control_panel.py
* Update alarm_control_panel.py
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor zeroconf setup to be async
Most of the setup was calling back to async because
we were setting up listeners. Since we only need
to jump into the executor to create the zeroconf
instance, its much faster to setup in async.
In testing this cut the setup time in half
or better.
* partial revert to after_deps
As a result of refactoring, there is duplicate code
we can now reduce.
Additionally `_wrap_state` can be removed because
it had unreachable checks for `None`
* Use entity_class: 'safety' in storage sensors
and more meaningful icons then 'mdi:test-tube', not sure if these are even necessary, given the device_class that defines the icons too?
* Set device_class, not icon
Still, the temperature sensors have both set, should I take these out in this go too? While we're at it....
* added device_class temperature to temp sensors
and removed explicit icons
do we need to set a D_c also on the Status sensor? line 187
* revert device_class Safety
which is now set in const.py
following up on https://github.com/home-assistant/core/pull/39757#pullrequestreview-483705147
* Use DEVICE_CLASS_SAFETY from const
+ revert temp to avoid conflict
* const from binary
* reverted non binary status sensors
to use: "mdi:checkbox-marked-circle-outline" and set None to device_class
Co-authored-by: Quentame <polletquentin74@me.com>
* Added check for mandatory "arg" of sensors
* Make pylint happy
* Moved to vol validator function for "arg" checks
* Make pylint happy once again
* Adjustments from code review
The powerview hub, seemingly randomly, will occasionally not
provide data for cover positions. Some requests will return the
desired response, but minutes later the same request might not.
It appears this issue is being experienced by a number of people:
https://community.home-assistant.io/t/hunter-douglas-powerview-component-expanding-this-api/88635/48
While an unfortunate bug with the hub, crashing the integration
as a result of this missing data appears somewhat excessive.
This patch adds a simple check to ensure the 'position' key
has been returned by the hub before attempting to access its
data.
The powerview hub, seemingly randomly, will occasionally not
provide data for cover positions. Some requests will return the
desired response, but minutes later the same request might not.
It appears this issue is being experienced by a number of people:
https://community.home-assistant.io/t/hunter-douglas-powerview-component-expanding-this-api/88635/48
While an unfortunate bug with the hub, crashing the integration
as a result of this missing data appears somewhat excessive.
This patch adds a simple check to ensure the 'position' key
has been returned by the hub before attempting to access its
data.
* Update ZHA dependencies
* Update zigpy-zigate
* Move ZNP on top of the radios so it's probed 1st
Some stick don't like if there was some unexpected traffic on the port
prior the initialization.
* Update dependencies
* Fibaro climate improvements
1, Implemented support for multinode climate devices, such as Danfoss HC10, differentiating zones based on endPointId
2, Improved recognition of temperature sensor subdevice for climate devices
3, Changed default opmode for devices without an opmode to "auto" instead of "fan_only", for better clarity and to avoid misunderstandings
* pylint inspired code restructuring to reduce depth
gotta love pylint
* Add support for events from Loitering guard and Motion guard
* Improve naming of events originating from applications Fence guard and VMD4 (Loitering guard and motion guard also benefit from this)
* Improvements for systemmonitor
* Use MDI CPU icon (bit architecture determined at runtime)
* Consistent usages of "percent" (ensured backwards compatibility by explicity setting the entity_id)
* Default value "/" (root) for disk_* sensors to prevent runtime issues if not specified in configuration
* Added CPU temperature sensor to systemmonitor
* Code streamlining of CPU temperature retrieval
* Corrected sensor state handling and added "available" logic
* Corrected ENTITY_ID to include argument
* Optimized "available" handling & CPU temperature detection
* Corrected tuple for CPU temperature determination
* - Do not create CPU temperature entity if no sensor data can be read
- Re-use temperature sensor labels from "glances" integration
* Array fix
* Corrected sensor array access
* Handle empty temperature sensor labels (same logic as used by "glances")
* PR comments: Setting unique_ID and f-strings
* Removed unused constants
* Revert entity rename (wait until next release)
* Replace old source prefixing for channels with new media browser
* Restore support to call select source with prefix
* Drop warning log for deprecated call method
* Implement local media finder and integrate into cast
* update to media source as a platform
* Tweak media source design
* fix websocket and local source
* fix websocket schema
* fix playing media
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add resolve_media websocket
* Register that shit
* Square brackets
* Sign path
* add support for multiple media sources and address PR review
* fix lint
* fix tests from auto whitelisting config/media
* allow specifying a name on the media source
* add tests
* fix for python 3.7
* Apply suggestions from code review
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add http back to cast and remove guess_type from executor as there is no i/o
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add tests for Broadlink remotes
* Reformat the tests with Black
* Add a helper method for device setup
* Rename device.setup() to device.setup_entry()
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Make sure we set discreteOnlyOpenClose for binary sensors
* Mark switches that are assumed state as commandOnlyOnOff
* Drop stray extra line
* Fix pylint error
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Linter suggestions
* Store coordinator in hass.data[supla_coordinators]
* Server cleanup
* Spelling mistake
* Fixes suggested in review
* Pass server and coordinator during async_setup_platform
* Linter changes
* Rename fetch_channels to _fetch_channels
* Linter suggestions
* Store coordinator in hass.data[supla_coordinators]
* Server cleanup
* Fixes suggested in review
* Pass server and coordinator during async_setup_platform
* Linter changes
* Remove scan interval configuration option
* Linting
* Isort
* Disable polling, update asyncpysupla version
* Black fixes
* Update manifest.json
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
As documented in the OWM API (https://openweathermap.org/api/one-call-api), rain and snow are reported on a 1h basis:
current.rain
current.rain.1h (where available) Rain volume for last hour, mm
current.snow
current.snow.1h (where available) Snow volume for last hour, mm
* add reload service
* test for reload service
* missing file
* Revert "missing file"
This reverts commit 24391fe3b9.
* Revert "test for reload service"
This reverts commit 5bda48d070.
* Rename ipaddr to ip_addr
* Move custom services to entity services
* Remove platform data
* Change service setup to callback
* Rename ip_addr to host
* Use _host inside class
* Provide a logbook option entity_matches_only to optimize for single entity id lookup
When entity_matches_only is provided, contexts and events that do not
contain the entity_id are not included in the logbook response.
* Update homeassistant/components/logbook/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* api only takes a single entity
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Store printer instances in hass.data
* Add SyncThru device registry support
* Use config entry id as hass.data key
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use printer hostname as device registry name
* Handle non-syncthru device more gracefully on entry setup
* Use device identifiers rather than connections to link entities with devices
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Prior 0.113 all lights and switches were reported as dimmable devices and this was fixed by #37978.
However, under some circumstances Alexa will not smoothly transition from those broken devices to the new ones as it cache the list of entities.
It is imperative to have Alexa rediscover all devices and then remove the now non-responding duplicates using the Alexa phone App. This can take quite a while if you have lots of devices.
An alternative would be to log to the Alexa web site and remove all the lights instead and then re-discover them all.
If you have multiple echo devices on your network, it is possible that the entries would continue to show as duplicates. This is due to an individual echo devices caching the old list and re-using it.
The only known solution for this is to remove your echo devices from your Amazon account and re-add them.
After that, have Alexa rediscover all your devices.
This is a one-off requirement.
Fixes#39503
It is no longer necessary to provide a list of entities to monitor
to the template platforms.
The template is now re-evaluated whenever
a referenced entity changes state, and new entities are automaticlly
discovered.
Automatic analysis can now determine the entities for all templates
without the need for manual setup.
* Start moving stuff to iOS
* Load config on to hass.data
* Remove un used logging
* Switch to Rest API
* Add schema
* Return whole config in new view and leave old 100 % the same
* Update doc strings
* MartinHjelmare feedback
* Move register view to async_setup_entry
* Make async_track_template_result track multiple templates
Combine template entity updates to only write ha
state once per template group update
* Make async_track_template_result use dataclasses for input/output
* black versions
* naming
after_dependencies were checking hass.config.components
to see if something was already setup. We did not do
the same for dependencies which resulted in trying
to set them up more then once.
Noticed when `homeassistant.setup` was set to debug
logging and many integrations were announcing
waiting on http when it was already setup.
* Move options import to async_setup_entry
* Add tests for insteon init
* Move common constants to const
* Clean up to adhear to standards
* Create mock insteon device manager
* Update for HA standards
* Use keys and align to config_flow steps
* Fix default port for hub v1
* Update doc string to represent function
* Remove dump print commands
* Add modem_type entry
* Simplify dict key test
* Setup platforms in async_setup_entry
* Black
* Black tests
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Update meteo_france to use CoordinatorEntity
* Update homeassistant/components/meteo_france/sensor.py
* Update homeassistant/components/meteo_france/weather.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Close the ADB connection when there is an exception
* Add a test
* Split a comment onto two lines
* Fix test ('async_update' -> 'async_update_entity')
* 'close' -> 'Close'
Updated the calendar event dict to contain a `summary` key so that the
title will display on the calendar panel. Also update the start/end
date to not include time information if the event is all day so that it
renders as an all day event on the calendar panel.
* Add device name to all webhook logs to help with multiple devices
* Reload notifications when we update the registration, update from rebase
* Make hassfest happy
* Adjust caplog test to accomodate log message change
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add basic light platform
* Add sensor support
* Bump aioshelly to 0.2.1
* Lint
* Use UNIT_PERCENTAGE
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
* Format sensor.py
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
* Use icmplib for ping when available
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Revert "Update homeassistant/components/ping/binary_sensor.py"
This reverts commit 618f42512a.
* move it up so its easier to see
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Remove unnecessary exception re-wraps
* Preserve exception chains on re-raise
We slap "from cause" to almost all possible cases here. In some cases it
could conceivably be better to do "from None" if we really want to hide
the cause. However those should be in the minority, and "from cause"
should be an improvement over the corresponding raise without a "from"
in all cases anyway.
The only case where we raise from None here is in plex, where the
exception for an original invalid SSL cert is not the root cause for
failure to validate a newly fetched one.
Follow local convention on exception variable names if there is a
consistent one, otherwise `err` to match with majority of codebase.
* Fix mistaken re-wrap in homematicip_cloud/hap.py
Missed the difference between HmipConnectionError and
HmipcConnectionError.
* Do not hide original error on plex new cert validation error
Original is not the cause for the new one, but showing old in the
traceback is useful nevertheless.
* Improve next_rain sensor attributes
* Add log message to identify missing condition
* Add a condtion
* Set the coordinator for 1 hour rain forecast in English
* Attribut dict keys shorten
* reverse transalate the API results for next rain
* Use f string for the keys in the dict
* Remove Logging from state property
* Remove other logging from state property
We're not operating on the installed package anyway, and necessary
dependencies are handled with tox deps.
As a nice bonus side effect, doing this sidesteps breakage caused by
pip's (up to 20.2.2 at least) behavior of prepending site-packages to
sys.path in certain cases, which in turn results in failures e.g. if a
version of typing that is incompatible with the (now overridden)
stdlib is installed there. And that combined with also pip's behavior
of installing a default build system consisting of setuptools and
wheel under the hood when it sees our pyproject.toml without a
build-system defined would provoke the breakage before we have a
chance to uninstall typing. (There are ways around this too, but
skipping the install makes the issue moot at least with our current
dependency set.)
Some new HomeKit climate devices, like XiaoMi Air Conditioning Controller P3 are heater-cooler devices rather than
thermostat devices. This commit adds support for the heater-cooler class via homekit_controller.
* Include the context_entity_id in the logbook api
context_entity_id is the first entity seen during
a time period that includes the context
* update test
* more of them
* include friendly name
* pylint wants a ternary
* Refactor
* performance
* fix homekit context
* Fix self describing events
* Fix external_events
* Add ZwaveStringSensor to OZW integration
* Remove unnecessary new line
* Set enabled default to false for ZwaveStringSensor
* Add missing decorator for property
* Add a test for ZwaveStringSensor
* Also test state of ZWaveStringSensor
* Remove entity type check
* Add binary sensors to Risco integration
* Minor cleanups
* RiscoEntity base class
* Platinum score
* Remove alarm parameter in _setup_risco
* Avoid zones and partitions sharing unique ids
Before this proposed change, all of the zones related to a running program turn "on", but it's not possible to know which zone is actually running (vs. queued). Adding the mapped state values (they are the same as program status values) as an attribute will allow inspection of all 3 states.
* Wait for broker to ACK MQTT operations
* Deduplicate new code
* Fix tests
* Improve test
* Don't hold PAHO lock when waiting for ACK
* Fix tests
* Add constant for ACK timeout
Now that python 3.7 is the minimum supported version, we can
use the more efficient SimpleQueue in the recorder as it does
not have to use threading.Lock
* Implement config flow in the Broadlink integration
* General improvements to the Broadlink config flow
* Remove unnecessary else after return
* Fix translations
* Rename device to device_entry
* Add tests for the config flow
* Improve docstrings
* Test we do not accept more than one config entry per device
* Improve helpers
* Allow empty packets
* Allow multiple config files for switches related to the same device
* Rename mock_device to mock_api
* General improvements
* Make new attempts before marking the device as unavailable
* Let the name be the template for the entity_id
* Handle OSError
* Test network unavailable in the configuration flow
* Rename lock attribute
* Update manifest.json
* Import devices from platforms
* Test import flow
* Add deprecation warnings
* General improvements
* Rename deprecate to discontinue
* Test device setup
* Add type attribute to mock api
* Test we handle an update failure at startup
* Remove BroadlinkDevice from tests
* Remove device.py from .coveragerc
* Add tests for the config flow
* Add tests for the device
* Test device registry and update listener
* Test MAC address validation
* Add tests for the device
* Extract domains and types to a helper function
* Do not patch integration details
* Add tests for the device
* Set device classes where appropriate
* Set an appropriate connection class
* Do not set device class for custom switches
* Fix tests and improve code readability
* Use RM4 to test authentication errors
* Handle BroadlinkException in the authentication
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
* Convert template vacuum to use async_track_template_result
* Remove unused code from the template integration
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
* Convert template vacuum to use async_track_template_result
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template alarm_control_panel to use async_track_template_result
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* catch KeyError and UnboundLocalError in light setup
* add check for no dimmer info from control4
* use existence of light_level data to enable dimming
* check if light data is not in dimmer and non_dimmer
* add item_variables logging
* add await to item_variables call
* add full item dump
* remove full item list
* change logging message
* fix typo
* reduce code inside try and add all entities at once
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* format with black
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add audio to stream component
* Use container options to do most fmp4 formatting
* Add test for treatment of different audio inputs
* Add test for treatment of different audio inputs
* pcm_mulaw frames should be s16
* Use seek to get BytesIO length
* Remove unused utcnow
* Remove peek_next_audio_pts
* only demux audio and video packets - ignoring data and subtitle streams
Co-authored-by: Jason Hunter <hunterjm@gmail.com>
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* catch KeyError and UnboundLocalError in light setup
* add check for no dimmer info from control4
* use existence of light_level data to enable dimming
* check if light data is not in dimmer and non_dimmer
* add item_variables logging
* add await to item_variables call
* add full item dump
* remove full item list
* change logging message
* fix typo
* reduce code inside try and add all entities at once
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* format with black
Co-authored-by: J. Nick Koston <nick@koston.org>
* async_update
* isort and pylint
* @shenxn suggestions
Co-authored-by: Xiaonan Shen <s@sxn.dev>
* async_update
* store the command from the beginning
* command as string
* f-string instead of str.format
* create_subprocess_shell > create_subprocess_exec
more logs
* isort
* types
* use asyncio.wait_for
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* @bdraco review changes
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Xiaonan Shen <s@sxn.dev>
Co-authored-by: J. Nick Koston <nick@koston.org>
On startup we run an sqlite3 quick_check to verify the database
integrity. In the majority of cases, the quick_check takes under
10 seconds.
On systems with very large databases and very slow disk/cpu,
this can take much longer so we freeze the timeout.
* Update __init__.py
Further fixes for HC3 compatibility.
* Update homeassistant/components/fibaro/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
INFO:homeassistant.setup:Setting up ffmpeg
DEBUG:haffmpeg.core:Start FFmpeg with ['ffmpeg', '-version', '']
ERROR:haffmpeg.core:FFmpeg fails [Errno 2] No such file or directory: 'ffmpeg': 'ffmpeg'
On startup we run an sqlite3 quick_check to verify the database
integrity. In the majority of cases, the quick_check takes under
10 seconds.
On systems with very large databases and very slow disk/cpu,
this can take much longer so we freeze the timeout.
* Update __init__.py
Further fixes for HC3 compatibility.
* Update homeassistant/components/fibaro/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Verify and case
* Review comments
* Update homeassistant/helpers/event.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/helpers/event.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Merge original changes from #23590
* guard
* adjust
* adjust
* adjust
* Update async_render_to_info for recent codebase changes
* no more protected access
* do not fire right away per review comments
* update test to not fire right away
* closer
* rework tests for non firing first
* augment coverage
* remove cruft
* test for complex listen add/remove
* update docs to match review feedback to not fire right away
* preserve existing behavior
* fix test
* Ensure listeners are cleaned up
* de-dupe and comment
* de-dupe and comment
* coverage
* test to login again if we go from exception to ok to exception
* Update homeassistant/core.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/helpers/event.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* rename _boolean_coerce to result_as_boolean and move it out of event
* additional coverage
* Add more tests (may still be able to trim this down)
Co-authored-by: Swamp-Ig <github@ninjateaparty.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
With this change, we should still be able to startup
in under 10 minutes if something really goes wrong.
The testing done in #38661 was used to determine
these values.
If a device on the network presented a bad name, zeroconf
would throw zeroconf.BadTypeInNameException and the service
browser would die off. We now trap the exception and continue.
The default on python 3.8 is for max_workers is significantly
lower than the default on python 3.7 which means we can get starved
for workers.
To determine a reasonable maximum, the maximum was increased to large
number on 5 production instances.
The number of worker threads created during startup that were
needed to avoid waiting for a thread:
HOU 1 - 71
HOU 2 - 48
OGG 1 - 60
OGG 2 - 68
OGG 3 - 64
This lead to a selection of 64 as it was reliable in all cases
and did not have a significant memory impact
* Review: if not to pop
* Review: async_add_job --> async_add_executor_job
* Review: const
* Review: start logging messages with capital letter
* Review : UTC isoformated time --> fix "Invalid date""
* Fix hail forecast condition
* Review: _show_setup_form is a callback
* Fix update option
* Review: no icon for next_rain
* Review: inline cities form
* Review: store places as an instance attribute
* UNDO_UPDATE_LISTENER()
With this change, we should still be able to startup
in under 10 minutes if something really goes wrong.
The testing done in #38661 was used to determine
these values.
* Abort flow if MAC-address can't be found
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Adjust homekit controller pairing errors back to a single step
* adjust test
* Revert "Adjust homekit controller pairing errors back to a single step"
This reverts commit e5ed89bbbb.
* Revert "adjust test"
This reverts commit c2e9f21a8401c144315260f6fdf71ea8060f8ca3.
* adjust
* prune
* prune
* merge
* Update tests
* remove debug
* adjust
* Multiple steps
* adjust the test
* Review: if not to pop
* Review: async_add_job --> async_add_executor_job
* Review: const
* Review: start logging messages with capital letter
* Review : UTC isoformated time --> fix "Invalid date""
* Fix hail forecast condition
* Review: _show_setup_form is a callback
* Fix update option
* Review: no icon for next_rain
* Review: inline cities form
* Review: store places as an instance attribute
* UNDO_UPDATE_LISTENER()
* Add support for slack bot icons via URL
* Removed as_user property from message send
* Use f-strings rather than concatenation
* Don't span lines with complex expression
If a device on the network presented a bad name, zeroconf
would throw zeroconf.BadTypeInNameException and the service
browser would die off. We now trap the exception and continue.
* Bump pysyncthru version to 0.7.0
This change includes a heavier refactoring, using a more reliable source for the device status and parsing display strings only for additional details
* Fix test flow to ensure a status is set
* Don't allow duplicate nightscout configs
* Fix nightscout translations
* Remove unnecessary should_poll method
* Remove SVG attribute, as it was duplicating the state
* Use aiohttp client session from HA
* Move validate_input outside the config class
* Use the entry unique_id on the sensor
* Move create entity logic
* Handle unexpected exception on Nightscout config
* update device
* add binary sensor
* updates post rebase
* fix entity type post rebase
* fix post rebase
* fix add entities
* fix name
* review comments
The default on python 3.8 is for max_workers is significantly
lower than the default on python 3.7 which means we can get starved
for workers.
To determine a reasonable maximum, the maximum was increased to large
number on 5 production instances.
The number of worker threads created during startup that were
needed to avoid waiting for a thread:
HOU 1 - 71
HOU 2 - 48
OGG 1 - 60
OGG 2 - 68
OGG 3 - 64
This lead to a selection of 64 as it was reliable in all cases
and did not have a significant memory impact
* Add ozw refresh_node_info websocket api
* Remove extra unsubs definition
* Remove unused bits from refresh_node_info websocket
* Add tests
* Add unsubscribe test
* Wait for response in unsubscribe test
* Squashed
* Fix requirements_all
* Update homeassistant/components/insteon/__init__.py
Only update options if the result is to create the entry.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/insteon/__init__.py
No return value needed.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ref RESULT_TYPE_CREATE_ENTRY correctly
* Return result back to import config process
* Make DOMAIN ref more clear
Co-authored-by: J. Nick Koston <nick@koston.org>
* Speed up OZW availability check
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move DwdWeatherWarningsAPI to a library hosted on PyPI
PyPI library uses new DWD WFS API
WFS API allows a more detailed query with reduced data sent as return
Change CONF_REGION_NAME from Optional to Required because it was never really optional
Set attribute region_state to "N/A" because it is not available via the new API
Add attributes warning_i_parameters and warning_i_color
* Use constants instead of raw strings
Streamline methods state and device_state_attributes
* Wrap api, use UTC time
* Update homeassistant/components/dwd_weather_warnings/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dwd_weather_warnings/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add hourly forecast
* fix tests to assert for 2 entities created
* fix test to assert for 4 calls
* correct test tracking home number of calls
* fox tests
* fix test
* Apply suggestions from code review
* black
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix homekit_controller pairing retry
If the device was busy on the first pairing attempt, it
was not possible to retry.
* always restart pairing on recoverable execptions
* move code
* malformed pin is safe to restart
* make busy_error an abort
* switch max retries, simplify tests
* try pairing later
* try pairing later
* merge
* s/tlv_error/protocol_error/g
* Adjust wording
* Use global CONF_UNIQUE_ID for mqtt
* Update __init__.py
* Update __init__.py
* Update __init__.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
when changing the color for a hive light, keep the brightness at the
previous level.
Co-authored-by: Adam Charlton <ad5665@live.co.uk>
Co-authored-by: Adam Charlton <ad5665@live.co.uk>
* Add missing Short type to set_config_param
* Forgot to fix the for loop
* Remove leftover return
* Guard the for loop
* Changed from if to else
* Fixed list iteration for validating input
* Adjusted per linter
* [KODI] Fix casing issue
Alexa and the Services UI on HA feeds in a media type of "channel" for media type.
The Kodi code looks for a "CHANNEL" instead, as a result the functionality fails.
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Add more tests
* Add tests for sensor platform
* Add more tests
* More tests
* Simplify parsing of attributes
* Change Quality scale to platinum
* Patch the library in the manual update entity test
* Add unsupported condition icon test
* Do not patch _async_get_data
* Apply suggestions from code review
* Update config_flow.py
* Apply suggestions from code review
* Apply suggestions from code review
* Apply suggestions from code review
* Update tests/components/accuweather/test_weather.py
* Apply suggestions from code review
* Add return_value
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Support the action.devices.commands.mute intent to mute and unmute
media_players that declare support for mute/unmute.
For media players with support for volume up/down, but no support for
setting the volume to a specific number, allow use of the
action.devices.commands.relativeMute intent to control volume up/down.
This will improve support for IR blasters and other open-loop
media_player integrations.
Pre calc domain when an entity id created to avoid
having to call the property method which had to call
split_entity_id every time. If there are a lot of
zone related automations, async_active_zone can call
async_entity_ids frequently which results in 100000s
of split_entity_id via the domain property every
second.
```
2020-08-07 22:38:10 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.3903193064] local variable 'response' referenced before assignment
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 115, in async_service_handler
async with getattr(websession, method)(
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 1012, in __aenter__
self._resp = await self._coro
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 582, in _request
break
File "/usr/local/lib/python3.8/site-packages/aiohttp/helpers.py", line 586, in __exit__
raise asyncio.TimeoutError from None
asyncio.exceptions.TimeoutError
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 125, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1281, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1316, in _execute_service
await handler.func(service_call)
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 137, in async_service_handler
_LOGGER.warning("Timeout call %s", response.url, exc_info=1)
UnboundLocalError: local variable 'response' referenced before assignment
```
* Make sure groups are initialized before template sensors
This way users may use the `expand` function in templates to expand
groups and have HA listen for changes to group members.
Fixes#35872
* Patch async_setup_platform instead of async_setup
* Cleanup
* Use an event to avoid sleep
* Update tests/components/template/test_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Make sure groups are initialized before template sensors
This way users may use the `expand` function in templates to expand
groups and have HA listen for changes to group members.
Fixes#35872
* Patch async_setup_platform instead of async_setup
* Cleanup
* Use an event to avoid sleep
* Update tests/components/template/test_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Don't set SUPPORT_EFFECT on DemoLight if there are no effects
This requires an update to the group test - previously the other lights
instantiated by the DemoLight component had nothing in ATTR_EFFECT_LIST, but
still had SUPPORT_EFFECT set. This appears to have resulted in the light
group test code setting an effect on the group and expecting it to apply to
all lights, but given that two of the bulbs didn't actually support any
effects (due to the empty ATTR_EFFECT_LIST) this seems like a broken
assumption and updating the test to verify only the bulb that supports
effects has had one applied seems reasonable.
* Add support for exposing light effects via Google Assistant
The LightEffects trait only supports a fixed (and small) list of lighting
effects, but we can expose them via the Modes trait - this requires saying
"Set (foo) effect to (bar)" which is a little clumsy, but at least makes it
possible.
* added device classes for electrical measurement
(cherry picked from commit 2409fe19ed43bef568a0cca826652867d3a2d71a)
* upadte power factor unit (%)
* update power factor unit (%)
* Add support for reload_on_update to _abort_if_unique_id_configured
async_update_entry now avoids firing update listeners and writing
the storage if there are no actual changes.
* Actually add the tests
* collapse branch
* Update homeassistant/config_entries.py
Co-authored-by: Franck Nijhof <git@frenck.dev>
* handle entries that lack the ability to reload
* reduce
* adjust konnected tests
* update axis tests
* fix blocking
* more mocking
* config flow tests outside of test_config_flow
* reduce
* volumio
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* set reload_on_update=False for integrations that implement self._abort_if_unique_id_configured(updates= and a reload listen
* get rid of copy
* revert test change
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
```
2020-08-07 22:38:10 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.3903193064] local variable 'response' referenced before assignment
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 115, in async_service_handler
async with getattr(websession, method)(
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 1012, in __aenter__
self._resp = await self._coro
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 582, in _request
break
File "/usr/local/lib/python3.8/site-packages/aiohttp/helpers.py", line 586, in __exit__
raise asyncio.TimeoutError from None
asyncio.exceptions.TimeoutError
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 125, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1281, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1316, in _execute_service
await handler.func(service_call)
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 137, in async_service_handler
_LOGGER.warning("Timeout call %s", response.url, exc_info=1)
UnboundLocalError: local variable 'response' referenced before assignment
```
* Update Tesla to use DataUpdateCoordinator
* Update Tesla to use DataUpdateCoordinator
* Fix linting errors
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Address requested changes
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix lint errors
* Remove controller from hass.data
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Automatically switch between resume and start playing
* Fix Black issue
Weirdly when i run it i had an error `1544 files left unchanged, 3313 files failed to reformat.`
I didn't watch the commit check output afterward.
* track all settings and add service to update a setting
* sort setting types
* reduce frequency of updates due to the increase in API calls per update
* change dict call to a get in case audio settings aren't available
unlikely to occur but less error prone
* Update if statement to be more consistent
* revert changes to track all settings and store in state machine
* revert one more change
* force setting_type and setting_name to lowercase to make it easier to understand how to make service call
* make service calls even simpler by attempting to transform certain parameters as much as possible
* Support Next/Previous for InputSelector
* Update homeassistant/components/google_assistant/trait.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Adjust to match new version of _next_selected
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
Fixed a rarely occuring problem (maybe a change with Fibaro HC3) where some scenes don't have a "visible" parameter, which was assumed to be mandatory in the past.
* Wait for the state of the entity to actually change before resolving PUT request
Additionally, we cache the entity's properties for up to two seconds for the successive GET state request
When Alexa issues a command to a Hue hub; it immediately queries the hub for the entity's state to confirm if the command was successful.
It expects the state to be effective immediately after the PUT request has been completed.
There may be a delay for the new state to actually be active, this is particularly obvious when using group lights.
This leads Alexa to report that the light had an error.
So we wait for the state of the entity to actually change before responding to the PUT request.
Due to rounding issue when converting the HA range (0..255) to Hue range (1..254) we now cache the state sets by Alexa and return those cached values for up to two seconds so that Alexa gets the same value as it originally set.
Fixes#38446
* Add new tests verifying emulated_hue behaviour.
* Increase code test coverage.
The remaining uncovered lines can't be tested as they mostly check that the hass framework or the http server properly work.
This commit doesn't attempt to fix exposed issues as it would be out of scope ; it merely create the tests to exercise the whole code.
* Update homeassistant/components/emulated_hue/hue_api.py
* Add test for state change wait timeout
* Preserve the cache long enough for groups to change
* Update tests/components/emulated_hue/test_hue_api.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Reduce time to reload yaml and check configuration
We spend a significant amount of time compiling templates
that we have already compiled.
Use an LRU cache to avoid re-compiling templates that
we frequently use.
* pylint
* switch to WeakValueDictionary
* preen
* Add config flow to HLK-SW16
* Use entry_id for unique_id
* Add options update capability
* Refactor entry_id under domain
* Remove name from config
* Set options
* Remove options flow
* remove unneccesary else block from validate_input and move domain cleanup to async_unload_entry
* Add tests and config import
* Add back config schema
* Remove config import
* Refactor unload
* Add back config import
* Update coveragerc
* Don't mock validate_input
* Test duplicate configs
* Add import test
* Use patch for timeout test
* Use mock for testing timeout
* Use MockSW16Client for tests
* Check mock_calls count
* Remove unused NameExists exception
* Remove title from strings.json
* Mock setup for import test
* Set PARALLEL_UPDATES for switch
* Move hass.data.setdefault(DOMAIN, {}) to async_setup_entry
* Bump the numato-gpio dependency
This relaxes the pyserial dependency to >=3.1.1 as requested by the
project with respect to the upcoming, stricter pip resolver.
* Update numato-gpio due to deprecation of class BinarySensorDevice
* Add new python library
* Update requirements
* Remove old libs
* config flow with client.search_places
* WIP: UI config + weather OK
* WIP: sensors
* WIP: add pressure to weather + available to sensor
* WIP: coordinator next_rain + alert
* Make import step working
* migrate to meteofrance-api v0.0.3
* Create coordinator for rain only if data available in API
* Fix avoid creation of rain sensor when not available.
* Add options flow for forecast mode
* Fix import config causing bug with UI
* Add alert sensor
* Add coastal alerts when available (#5)
* Use meteofrance-api feature branch on Github
* Update unit of next_rain sensor
* Test different type of attibutes
* Typo for attribute
* Next rain sensor device class as timestamp
* Better design for rain entity attributes
* use master branch for meteofrance-api
* time displayed in the HA server timezone.
* fix bug when next_rain_date_locale is None
* Add precipitation and cloud cover sensors
* Add variable to avoid repeating computing
* Apply suggestions from code review
Co-authored-by: Quentame <polletquentin74@me.com>
* Attributes names in const.
* Cleaning
* Cleaning: use current_forecast and today_forecast
* Write state to HA after fetch
* Refactor, Log messages and bug fix. (#6)
* Add messages in log
* Refactor using 'current_forecast'.
* Use % string format with _LOGGER
* Remove inconsistent path
* Secure timestamp value and get current day forecast
* new unique_id
* Change Log message to debug
* Log messages improvement
* Don't try to create weather alert sensor if not in covered zone.
* convert wind speed in km/h
* Better list of city in config_flow
* Manage initial CONF_MODE as None
* Review correction
* Review coorections
* unique id correction
* Migrate from previous config
* Make config name detailed
* Fix weather alert sensor unload (#7)
* Unload weather alert platform
* Revert "Unload weather alert platform"
This reverts commit 95259fdee84f30a5be915eb1fbb2e19fcddc97e4.
* second try in async_unload_entry
* Make it work
* isort modification
* remove weather alert logic in sensor.py
* Refactor to avoid too long code lines
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
* Update config tests to Meteo-France (#18)
* Update meteo_france exception name
* Update MeteoFranceClient name used in tests
* Update 'test_user'
* Make test_user works
* Add test test_user_list
* Make test_import works
* Quick & Dirty fix on exception managment. WIP
* allow to catch MeteoFranceClient() exceptions
* remove test_abort_if_already_setup_district
* bump meteofrance-api version
* We do not need to test Exception in flow yet
* Remove unused data
* Change client1 fixture name
* Change client2 fixture name
* Finish cities step
* Test import with multiple choice
* refactor places
* Add option flow test
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
* Fix errors due to missing data in the API (#22)
* fix case where probability_forecast it not in API
* Workaround for probabilty_forecast data null value
* Fix weather alert sensor added when shouldn't
* Add a partlycloudy and cloudy value options in condition map
* Enable snow chance entity
* fix from review
* remove summary
* Other fix from PR review
* WIP: error if no results in city search
* Add test for config_flow when no result in search
* Lint fix
* generate en.json
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/sensor.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* string: city input --> city field
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
* Add zeroconf discovery for bond integration
* Add zeroconf discovery for bond integration (fix typo)
* Add zeroconf discovery for bond integration (PR feedback)
* Add zeroconf discovery for bond integration (PR feedback)
* Add zeroconf discovery for bond integration (PR feedback)
* fix error when unique id is re-used
* add test for the logging
* Update homeassistant/helpers/entity_platform.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/helpers/entity_platform.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Abode camera controls
* Add tests for camera turn on and off service
* Bump abodepy version
* Bump abodepy version and updates to reflect changes
* Update manifest
* Restore the ability to tell when a harmony activity is starting
* adjust for poweroff
* switch to activity name for activity starting
* adjust
* do not set starting on initial update
* Add support for HomeKit doorbell
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* add speaker service for doorbells
* fixed test as doorbell char requires null value
* removed null value for doorbell presses. and removed broken override of default values
Co-authored-by: J. Nick Koston <nick@koston.org>
* Simplify generate_entity_id
Use similar optimized logic for async_generate_entity_id
from entity_registry that was already optimized
* pylint
* make generate_entity_id a wrapper around async_generate_entity_id instead
* Add support for dimmable lights
* Fix formatting
* Add supported features test on Bond Light
* Add more tests to bond light and fixes comments
* Fix rebase conflict resolution
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Add support for multiple time triggers in automations
* Attach with single callback
* Patch time in tests
* Improve test coverage
* Adjusting my facepalm moment
Through some testing with the samsungtvws library, it was determined
that the issue is related to the short read timeout (1s). Increasing
the timeout to 10s should solve the issue.
When speedtest starts up, it would saturate the network interface and cause other
integrations to randomly fail to setup. We now wait to do the first speed test
until after the started event is fired.
We would connect to the hub via discovery and via setup
around the same time. This put additional load on the hub
which can increase the risk of timeouts.
Through some testing with the samsungtvws library, it was determined
that the issue is related to the short read timeout (1s). Increasing
the timeout to 10s should solve the issue.
* Don't schedule an update if the hass instance isn't instantiated
If we get a status update packet before self.hass exists, we trip a
"assert self.hass is not None" that was added in 0.112 and setup fails.
* Fix callback hander properly
The right fix is to register the callback after hass is ready for it.
* Remove unnecessary check
This is now guaranteed by the core code.
* Don't request an immediate device update and do an async connect.
* Remove unnecessary return
When speedtest starts up, it would saturate the network interface and cause other
integrations to randomly fail to setup. We now wait to do the first speed test
until after the started event is fired.
* Dimming duration fix
Fixes#38068 - allows dimming duration to 7620 (default of 7621)
* Forgot to commit my test updates
* Added backwards compatibility with pre-150+ builds
Added tests for backwards compatibility
* Upped the build number cut off
* Add check for major.minor version as well
* Fix major.minor detection
* Adjust variable name
* Adjust version checking logic
* Math is hard
* Rename files, adjust test names
* Update doc string
Automations or HomeKit may turn the device on multiple times
when the current activity is already active which will cause
harmony to lose state. This behavior is unexpected as turning
the device on when its already on isn't expected to reset state.
* Add Abode camera controls
* Add tests for camera turn on and off service
* Bump abodepy version
* Bump abodepy version and updates to reflect changes
* Update manifest
* Refactor bond unit tests to reduce boilerplate
* Refactor bond unit tests to reduce boilerplate (PR feedback)
* Refactor bond unit tests to reduce boilerplate (PR feedback, nullcontext)
* Support multiple camera stream in HomeKit
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Revert "Update homeassistant/components/homekit/type_cameras.py"
This reverts commit d7624c5bff.
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* black
* bump pyhap
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
We would connect to the hub via discovery and via setup
around the same time. This put additional load on the hub
which can increase the risk of timeouts.
Added support for new 2020 version of the Aqara D1 double wall switch (lumi.remote.b286acn02)
Confirmed that all button press events use the same codes after updating deconz rest api to add support for this switch.
A contributor of the API currently has the working version @ git clone --branch Legrand-teleruptor https://github.com/Smanar/deconz-rest-plugin.git
* Fix Xbox Live component
The API moved to a different domain, so the integration was broken.
The library upgrade contains the required fixes.
* Fix API connectivity check
* Access dict values directly
* Fix SimpliSafe to work with new MFA
* Code review (part 1)
* Input needed from Martin
* Code review
* Code review
* Restore YAML
* Tests
* Code review
* Remove JSON patching in tests
* Add reauth test
* One more reauth test
* Don't abuse the word "conf"
* Update homeassistant/components/simplisafe/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Test coverage
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix Xbox Live component
The API moved to a different domain, so the integration was broken.
The library upgrade contains the required fixes.
* Fix API connectivity check
* Access dict values directly
* Add binary sensor support to motion sensors and smoke detectors
* Add support for new sensor events as binary sensors
Adds a default device_class for motion sensors and smoke detector
* Use device type instead of event to set class
* Add some additional binary values
* Fix SimpliSafe to work with new MFA
* Code review (part 1)
* Input needed from Martin
* Code review
* Code review
* Restore YAML
* Tests
* Code review
* Remove JSON patching in tests
* Add reauth test
* One more reauth test
* Don't abuse the word "conf"
* Update homeassistant/components/simplisafe/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Test coverage
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
for scenarios of enabling/disabling (~ creating/removing) entities,
so it does not trigger in removal if a `to: xxx` is defined, and also
does not trigger in creation if a `from: xxx` is present.
* Add set_central_heating_ovrd service to opentherm_gw
* Use await instead of async_create_task
Use await instead of async_create_task as per review.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use boolean values for service call to opentherm_gw.set_central_heating_ovrd
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update const.py
Added device class "IPKeyBlindMulti" to const.py in order to support HomematicIP device HmIP-DRBLI4. The site package pyhomematic supports this class already in actors.py.
* Update const.py
Every second we were calling the getrandom() syscall to generate a uuid4
for a context that will never be looked:
* In most setups there are no more time_changed listeners
* The ones that do exist never care about context
* time_changed events are never saved in the database
* Refactor bond integration to centralize update state logic in single superclass
* Refactor bond integration to centralize update state logic in single superclass
* Ensure we do not start discovered flows until after the start event has fired
This change makes zeroconf and ssdp match discovery behavior of not
creating config flows until the start event has been fired. This
prevents config flow creation/dependency installs for discovered
config flows from competing for cpu time during startup.
* Start discovery/service browser/ssdp when EVENT_HOMEASSISTANT_STARTED is fired instead of EVENT_HOMEASSISTANT_START
* Implement unload entry
* Change async_remove to remove
* Pop data from hass.data
* Change sequence order in unload
* Dont unload internal when unload platforms fail
* Use event loop scheduling for tracking time patterns
* make patching of time targetable
* patch time tests since time can tick to match during the test
* fix more tests
* time can only move forward
* time can only move forward
* back to 100% coverage
* simplify since the event loop time cannot move backwards
* simplify some more
* revert simplify
* Revert "revert simplify"
This reverts commit bd42f232f6.
* Revert "simplify some more"
This reverts commit 2a6c57d514.
* Revert "simplify since the event loop time cannot move backwards"
This reverts commit 3b13714ef4.
* Attempt another simplify
* time does not move backwards in the last two
* remove next_time <= now check
* fix previous merge error
* Fix color temp math
* Ran black --fast
* Update test_light.py
* tweaking mireds
* updating comments
* fixing test_light to match standards
* fixing comments, need coffee
* WOLF Smart-set integration
* Removed translations. Changed device class of timestamp. Added new test for unknown exception
* Remove unit_of_measurement from hours sensor
* Code cleanup. Pull Request comments fixes
* ConnectError import change. Removed DEVICE_CLASS_TIMESTAMP
* Add unique id guard with tests. Use common translations. Move device_id resolution to config_flow.
* Remove debug print
This issue has been corrected and then reverted multiple times.
It seems that the core issue was a casing one (On/off vs On/Off) ; for better
matching with a real Hue hub, also add the productname.
Tested to work with echo 2 and echo 5.
* Close the ADB connection on HA stop
* Get the test to pass
* Remove unnecessary test code
* Register the callback sooner
* '_async_stop' -> 'async_close'
* 'async_close' method -> '_async_close' function
* Passes secure parameter when setting up Nuki (#36844)
* Adds an additional configuration option for soft bridges instead of passing True when setting up the bridge
* Revert "Adds an additional configuration option for soft bridges instead of passing True when setting up the bridge"
This reverts commit af1d839ab1.
* Make sensor and binary_sensor inherit from base class
* Drop several pointless public properties
* Make sure base function has same parameters
* Drop pass
* Missed one
* Adjust inherit order
* Passes secure parameter when setting up Nuki (#36844)
* Adds an additional configuration option for soft bridges instead of passing True when setting up the bridge
* Revert "Adds an additional configuration option for soft bridges instead of passing True when setting up the bridge"
This reverts commit af1d839ab1.
* Add event attribute to display last received event
* Restore state using event attribute
* Allow empty dict for device config
* Must also validate normal case
* Do early return
* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
* Remove support for legacy logbook events created before 0.112
Reduce the complexity of the logbook code. This
should also have a small performance boost.
* None is the default
Most of the the template platforms would check for
extract_entities failing to extract entities and avoid
setting up a state change listner for MATCH_ALL after
extract_entities had warned that it could not extract
the entities and updates would need to be done manually.
This protection has been extended to all template platforms.
Alter the behavior of extract_entities to return the
successfully extracted entities if one or more templates
fail extraction instead of returning MATCH_ALL
async_track_state_change_event is faster than async_track_state_change
and since we do not care about the data being returned to the callback
this is a simple speedup
async_track_state_change_event is faster than async_track_state_change
and since we do not care about the data being returned to the callback
this is a simple speedup
* Switch async_track_state_change to the faster async_track_state_change_event part 4
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* pylint
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
Previously, the media_content_id field would contain the track name, which
appears was a regression when the Spotify integration was rewritten in
7e4b9adc. The media_content_id now reverts to containing the Spotify
track 'uri' field, which has the form 'spotify:track:...'
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
* Switch to config flow setup
* Add minimal test for config flow
* Add myself as codeowner and address some review concerns
* Address some further review comments
* Created a binary sensor and corrected some review comments.
* Updated the poolsense class and its interface to handle credentials better
* Moved the client session to the PoolSense class.
* Apply suggestions from code review
* Update binary_sensor.py
* Update homeassistant/components/poolsense/__init__.py
* Update sensor.py
* Update binary_sensor.py
* Removed unnecessary class variable
* Correcting a merge error.
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Switch to integration level config
* Switch to per device config rather than per entity type
* All roller shutters should be added as covers
(there are non lighting types)
* Fixup tests that used invalid packets for platforms
* Avoid variable re-use
* Allow control events on sensors too
That way we get signal level sensors for these too
* Lint correction
* Don't filter sensors from config
Disable sensors from GUI if the entities are not wanted
* Correct usage of ATTR_ instead of CONF_
* Make sure the logging when a new entity is added includes the event
* Introduce Bond Hub concept
* Read Hub version information when setting up entry
* Link entities to Hub using via_device
* Add test to verify created Hub device properties
* Created a binary sensor and corrected some review comments.
* Updated the poolsense class and its interface to handle credentials better
* Moved the client session to the PoolSense class.
* Apply suggestions from code review
* Update binary_sensor.py
* Update homeassistant/components/poolsense/__init__.py
* Update sensor.py
* Update binary_sensor.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Refactor Bond integration to remove duplication in Entity code and unit tests
* Refactor Bond integration to remove duplication in Entity code and unit tests (PR feedback)
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration (apply PR feedback)
* Support Fan domain in Bond integration (apply PR feedback)
* Use the shared zeroconf instance for homekit_controller
* bump version
* Update for upstream changes. Thank you @Jc2k !
* naming
* bump version
* empty commit to reset CI as re-run is not working
* Re-add remote file support for Slack
* More work
* Ensure Slack can only upload files from whitelisted directories
* Cleanup
* Finish work
* Code review
* Messing around
* Final cleanup
* Add comment explaining why we use aiohttp for remote files
* Typo
* Declare Bond covers as having assumed state, setup local polling for state updates
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Update type_cameras.py
* Apply suggestions from code review
Support both 24kHz and 16kHz sample rate
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adjust formatting
* Reformat
Co-authored-by: J. Nick Koston <nick@koston.org>
* Detect lingering threads after tests
* Make sure cast is setup before checking state
* Make sure we ask executors of old hass to shutdown
We are not waiting here, just hoping for the best
* Make sure all instances of hass and executors is stopped.
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Also apply hass stopping to scripts
* Adjust to changes how we set up executor
* Add new CoreState.stopped
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
This way _handle_event can contain things available
when entity has been added to home assistant,
and _apply event can remain internal and used on init.
* Add public weather sensors back in
* Remove stale code
* Cleanup after before adding entities
* Fix pylint complaint
* Add test for options flow
* Change mode to listbox
* Update .coveragerc
* Address comments
* Don't process empty list
* Address comment
* Fix mistake
* Make signal unique
* Make string more unique
* Fix merge conflict
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* make ip check hostname aware
* add executor job for sync function doing IO and remove errant comma
* revert change to update new_data explicitly for options keys since it is already done later
* empty commit to retrigger CI
* Add support for set_config_parameter service
* Adjusted elif to if
* More if/else cleanup
* More if/else cleanup
* Less nesting
* End loop properly
* Added byte type
* Convert break to return
* fix presets and mode conversion
* fix mapping issues in ozw climate
* build mapping table in advance
* Copying a dict to a list copies the keys by default
* Switch what is used for device identifier
type_string can be changed if new device types are added based
on same driver.
* No need to slugify unique id
* Make devices and activities visibile as harmony attributes
* Allow restoring previous activity, add tests
* fix test
* Kill activity_notify with fire
* remove trailing ,
The icon for Withings sleep sensor was using `mdi:bed` (which is correct for MDI v5.0.45 and later). However Home Assistant still uses an older version of Material Design Icons (4.9.95), so this `mdi:bed` icon was not displaying at all. It should be`mdi:hotel` instead, which you can see here: https://cdn.materialdesignicons.com/4.9.95/
- Bumps bravia-tv lib to 1.0.6 which fixes is_connected() to actually
return True only when API is connected, instead of just returning whether
or not cookies are cached (regardless if they actually worked).
- Wrap is_connected() because it now performs io.
- Remove unnecessary logic to refresh cookies. Now that
is_connected() works, the bravia instance only needs to be
reconnected when is_connected is False and TV is not off.
* Move logbook continuous domain filtering to sql
sensors tend to generate a significant amount of states
that are filtered out by logbook. In testing 75% of
states can be filtered away in sql to avoid the
sqlalchemy ORM overhead of creating objects that will
be discarded.
* remove un-needed nesting
* Switch homekit to use async_track_state_change_event
Calling async_track_state_change_event directly
is faster than async_track_state_change and has
slightly lower latency triggering state updates
in homekit
* check for deleted entities
* Update additional tests for linked sensor removals
* Ensure removing entities does not result in an exception
* Cleanup async_track_state_change and augment docstrings.
Skip from_state and to_state matching in
async_track_state_change when they are None
Optimize the state change listener for the most
common use case: no to_state and from_state
matching.
* Update benchmark to be more realistic (previously we assumed only one entity was present in the whole instance)
* Add more tests to ensure behavior is preserved
* Ensure new behavior matches test
* remove MATCH_ALL from zone automation since its the default anyways
* Might as well use async_track_state_change_event instead since MATCH_ALL is removed
* Switch to dispatcher
* Adjust tests for dispatcher
* Store device in sensor
* Move state application into binary sensor entity class
* Move more specifics into per platform classes
* Should not apply event in init of sensor
* Switch to call_later
* Make apply_event public
* No point in slugifying debug logs
* Adjust error in off delay and event
* Make sure we match with masked id
* Migrate Guardian to use the DataUpdateCoordinator
* Finish work
* Cleanup
* Don't use UpdateFailed error
* Code cleanup
* Code cleanup
* Remove unnecessary change
* Code review
* Code review
* Use a subclass of DataUpdateCoordinator
* Make sure to pop client upon unload
* Adjust coverage
* Switch tests to use hass objects instead of direct
* Make sure sensor update state
* Add some initial binary sensor tests
* Add initial binary sensor tests
* Add tests for pt2262
* Add test for off delay
Calling async_track_state_change_event directly
is faster than async_track_state_change (see #37251) and has
slightly lower latency triggering state updates
* Convert Android TV integration to async
* pylint
* Remove unused test code
* Require async versions of androidtv and adb-shell
* Cleanup
* Remove commented out code
* Use constants SHELL_RESPONSE_OFF and SHELL_RESPONSE_STANDBY
* Prebake common history queries
The python overhead of to construct
the queries exceeded the database overhead. We now
prebake the queries that get frequently polled.
This reduces the time it takes to update history_stats
sensors and can make quite a difference if there
are a lot of them.
When using the mini-graph-card card, all the entities
on the card being graphed are queried every few seconds
for new states. Previously this would tie up the database if there
are lot of these graphs in the UI.
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* cache entity_filter in the lambda
* switch to yield
* Revert "switch to yield"
This reverts commit f8386f4940.
* get_states always returns a list
* query wasnt actually reusable so revert part of the breakout
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add NetdataAlarms alarm sensor to additionally collect alarm information from the netdata host
* Incorporate suggested changes by @MartinHjelmare
* Change from pictures to icons
* Simplify API callbacks following home-assistant-ecosystem/python-netdata/pull/5 and home-assistant-ecosystem/python-netdata/pull/6
* Bring back lost empty line
* Update the library version in manifest.json
* Update the library version in requirements_all.txt
* Linting
* Linting
* Fix typo
* Do not count cleared and undefined alarms as warnings
* Do not count cleared, undefined and uninitialized alarms as warnings
- Bumps bravia-tv lib to 1.0.6 which fixes is_connected() to actually
return True only when API is connected, instead of just returning whether
or not cookies are cached (regardless if they actually worked).
- Wrap is_connected() because it now performs io.
- Remove unnecessary logic to refresh cookies. Now that
is_connected() works, the bravia instance only needs to be
reconnected when is_connected is False and TV is not off.
The icon for Withings sleep sensor was using `mdi:bed` (which is correct for MDI v5.0.45 and later). However Home Assistant still uses an older version of Material Design Icons (4.9.95), so this `mdi:bed` icon was not displaying at all. It should be`mdi:hotel` instead, which you can see here: https://cdn.materialdesignicons.com/4.9.95/
* GitHub Actions: Add yamllint problem matcher
* Introduce YAML issue to test problem matcher
* Revert "Introduce YAML issue to test problem matcher"
This reverts commit fa88c9484e.
* GitHub Actions: Add check executables problem matcher
* Create a problem for testing
* Revert "Create a problem for testing"
This reverts commit 3532b3777f.
* GitHub Actions: Add pylint problem matcher
* Create a pylint issue to test
* Create another pylint issue to test
* Register problem matcher in same step
* Apply possible workaround
* Disable problem matcher to catch raw output
* Trying again with new CI containers
* Extend problem matcher with errors and warnings
* Improve matching, keep error code in message
* Revert "Create another pylint issue to test"
This reverts commit a90e23656e.
* Revert "Create a pylint issue to test"
This reverts commit 9dd5148eb4.
* Fix stable name in job description
* GitHub Actions: Add codespell problem matcher
* Add some spelling issues for test
* Disable color, might throw off matcher
* Revert "Add some spelling issues for test"
This reverts commit 3afb59c8d9.
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
import Mock from tests.async_mock as suggested
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* fix unit tests that were failing after suggested changes
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Rework and re-enable rfxtrx tests
* Add missed change to _signal_event
* Fixup the dummy serial that causes max cpu
* Make sure we cleanup thread here too
* Make sure we always wait for tasks before we check state
* Some more places we need to wait before checking
* Improve unifi device tracker performance
The unifi websocket sends an update every second
which generates a significant amount of state
changed updates.
Avoid creating callback functions when they
are not going to be used.
* make _no_heartbeat/_make_disconnected instance methods
* remove extra empty line
* revert is_wired change
* remove extra line
* Add humidifier support to homekit
* spell
* dependencies
* lint
* add linked humidity sensor for humidifiers
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* pylint
* Fix tests
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/homekit/test_homekit.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* lint
* pylint
* push
* test for unavailable linker sensor
* black
* valid values key case
* black
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* black
* coverage
* Set current humidity to 0 if linked sensor removed or unavailable
* use last known humidity instead
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial commit for Dexcom integration
* Dexcom config flow testing
* Clarify errors during setup
* Resolve minor test issues
* Update sensor availability, resolve linting issues
* Add sensor tests
* Remove title due to 0.109, add abort
* >94.97% codecov/patch
* Move .translations/ to translations/
* Add constants for servers and unit of measurements
* Bump pydexcom version
* Updated domain schema, Dexcom creation
* Support for different units of measurement
* Update tests
* Remove empty items from manifest
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Raise UpdateFailed if fetching new session fails
* Switch everything over to required
* Simplify state information
* Simplify async_on_remove
* Pydexcom package now handles fetching new session
* Only allow config flow
* Remove ternary operator
* Bump version, pydexcom handling session refresh
* Using common strings
* Import from test.async_mock
* Shorten variable names
* Resolve tests after removing yaml support
* Return false if credentials are invalid
* Available seems to handle if data is empty
* Now using option flow, remove handling import
* Add fixture for JSON returned from API
* Overhaul testing
* Revise update options
* Bump pydexcom version
* Combat listener repetition
* Undo update listener using callback
* Change sensor availability to use last_update_success
* Update sensor availability and tests
* Rename test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add service to support setting timer on water heater component
* Update water_heater.py
Remove info logging
Return if unsupported option used
* Added default temperature as it is optional
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/water_heater.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix to remove else statement, and fix lint error
* Reinstate entity id on schema, allow setting with temperature on devices that dont support it
* Remove entity id from schema as not required
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This effectively fixes an important bug where the graph would go negative because 1.2.0 used the 32-bit counters and 1.3.0 uses 64-bit counters will not realistically go negative any time soon.
Since we now base all of exposure checks on data that
will not change, we can cache the result instead
of calculating it every loop.
This change complements the work done in #32718
* refactoring to share logic and sensor startup error test
* Added handling for V1 InfluxDBServerError to start-up and runtime and test for it
* Added InfluxDBServerError test to sensor setup tests
* Raising PlatformNotReady exception from sensor for setup failure
* Proper testing of PlatformNotReady error
This effectively fixes an important bug where the graph would go negative because 1.2.0 used the 32-bit counters and 1.3.0 uses 64-bit counters will not realistically go negative any time soon.
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (add changed requirements_test_all.txt)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (bring coverage to 100%)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (updated patch path as suggested)
* add first unit test to config flow for Plum Lightpad (add unit test for abort)
* Move logbook continuous domain filtering to sql
sensors tend to generate a significant amount of states
that are filtered out by logbook. In testing 75% of
states can be filtered away in sql to avoid the
sqlalchemy ORM overhead of creating objects that will
be discarded.
* remove un-needed nesting
* add support for config flow for Plum Lightpad integration
* add support for config flow for Plum Lightpad integration (remove unintended change to requirements_test_all.txt)
* add support for config flow for Plum Lightpad integration (fix lint issues)
* add support for config flow for Plum Lightpad integration (PR feedback)
* add support for config flow for Plum Lightpad integration (fix lint)
* Update homeassistant/components/plum_lightpad/__init__.py
use debug instead of info for logging
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use generated references instead of hard-coded strings
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use references instead of hard-coded string
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing translated title per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* remove unnecessary deepcopy
* remove unnecessary logging warning, since ignoring is expected for configuration.yaml scenario
* switch to hass.loop.create_task per PR feedback
* show login errors when configuring integration via UI (PR feedback)
* disable wrongly flag pylint violation
* add except handler to handle connection errors when setting up config flow entry
* address PR feedback regarding exception handling
* Update homeassistant/components/plum_lightpad/config_flow.py
use helper instead of custom code/message-id
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Added GLOB capability to entityfilter and every place that uses it. All existing tests are passing
* added tests for components affected by glob change
* fixed flake8 error
* mocking the correct listener
* mocking correct bus method in azure test
* tests passing in 3.7 and 3.8
* fixed formatting issue from rebase/conflict
* Checking against glob patterns in more performant way
* perf improvments and reverted unnecessarily adjusted tests
* added new benchmark test around filters
* no longer using get with default in entityfilter
* changed filter name and removed logbook from filter benchmark
* simplified benchmark tests from feedback
* fixed apache tests and returned include exclude schemas to normal
* fixed azure event hub tests to properly go through component logic
* fixed azure test and clean up for other tests
* renaming test files to match standard
* merged mqtt statestream test changes with base
* removed dependency on recorder filter schema from history
* fixed recorder tests after merge and a bunch of lint errors
Cleanup indexes as >50% of the db size was indexes,
many of them unused in any current query
Logbook search was having to filter event_types without
an index:
Created ix_events_event_type_time_fired
Dropped ix_events_event_type
States had a redundant keys on composite index:
Dropped ix_states_entity_id
Its unused since we have ix_states_entity_id_last_updated
De-duplicate storage of context in states as
its always stored in events and can be found
by joining the state on the event_id.
Dropped ix_states_context_id
Dropped ix_states_context_parent_id
Dropped ix_states_context_user_id
After schema v9:
STATES............................................ 10186 40.9%
EVENTS............................................ 5502 22.1%
IX_STATES_ENTITY_ID_LAST_UPDATED.................. 2177 8.7%
IX_EVENTS_EVENT_TYPE_TIME_FIRED................... 1910 7.7%
IX_EVENTS_CONTEXT_ID.............................. 1592 6.4%
IX_EVENTS_TIME_FIRED.............................. 1383 5.6%
IX_STATES_LAST_UPDATED............................ 1079 4.3%
IX_STATES_EVENT_ID................................ 375 1.5%
IX_EVENTS_CONTEXT_PARENT_ID....................... 347 1.4%
IX_EVENTS_CONTEXT_USER_ID......................... 346 1.4%
IX_RECORDER_RUNS_START_END........................ 1 0.004%
RECORDER_RUNS..................................... 1 0.004%
SCHEMA_CHANGES.................................... 1 0.004%
SQLITE_MASTER..................................... 1 0.004%
* Changes to be committed:
modified: homeassistant/components/solaredge/const.py
modified: homeassistant/components/solaredge/sensor.py
Solaredge as recently changed its policy about local api access, so solaredge-local doesn't work with last firmware update for almost users.
Please check https://github.com/home-assistant/core.git
Anyway the solardge remote api is still working, but doesn't got some usefull sensor information as Power SelfConsumption, Power Exported, Power Imported.
With my update, I'll fetching API energy details where we got these new sensors.
* Grammar/syntax fix
* Indentation fix
* Black formatting fix
* isort fix
* To force re-check
* Fix too-many-nested-blocks
* Fix indentation
* Fix Black formatting :D
* Fix Redefining built-in var
* Removed comment to force check
* adj
* time_fired_isoformat
* remove unused code
* tests for processing timestamps
* restore missing import lost in merge conflict
* test for None case
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* Now supports Hydrawise API v1.4
* Removed dependency and codeowners name.
* Update CODEOWNERS to include hydrawise
* Changes made from review comments.
* Clean up update.
* Added device class for timestamp and switch. Consolodate methods to parent class.
* Cap next_cycle at 2 years to prevent time overflow.
* Addressed review comments.
* Updated DEVICE_MAP and icon() based on review comments.
* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Prefilter more logbook events in sql
Prefilter sensor events in _keep_event before humanify
Cache static attribute lookup
Reduces logbook execution time by ~35%
* fix mocking in benchmark
* Update tests for logbook users
* Adding PM2.5 and PM2.5 24hr Average
* Corrected unit to const.py CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
* Imported CONCENTRATION_MICROGRAMS_PER_CUBIC_METER for PM2.5 units
* Fixed code formatting with `black`
* TTS seems unsupported on heos media player #32862
TTS seems unsupported on heos media player #32862
The type media_type music which is required by TTS was not covered.
* Update homeassistant/components/heos/media_player.py
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Update to test_media_player.py
Test for TTS support to Heos #35386
* Update test
Add TTS support to Heos #35386
* Update to test_play_media_music
assert set to "Unable to play music: Failure (1)" seems to cause an issue.
* test_play_media_music
syntax
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Allow activity change on start of switch
Allow activity to be updated when a switch to a new activity is initiated instead of when it is completed.
* Updates based on feedback
Some items are not required to be done as YAML is not used anymore.
Cleaned-up some code.
* Fix for change on how to set callbacks
How callbacks are set now one has to set the new_activity and new_activity_starting as well, even just with None.
* Added callback update
Added so that when it is changed in the UI the callbacks will be changed as well.
* Added test cases for notify setting
Added test cases for config flow to test new setting for activity notifications.
* Add discovery to NUT integration
* implement async_step_zeroconf
* Update test to make sure unique id not set
* Remove host/port import when coming from discovery, add title placeholders
* fix mis-paste
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add expiration timestamp to cert_expiry sensors
* Clear timestamp if cert becomes invalid
* Use timezone-aware timestamps
* Use DataUpdateCoordinator, split timestamp to separate sensor
* Use UTC, simpler add/remove handling
* Review fixes
* Fix incomplete mock that fails in 3.8
* Use static timestamps, improve helper method name
* Add old_state_id to states, remove old/new state data from events since it can now be found by a join
* remove state lookup on restart
* Ensure old_state is set for exisitng states
* Add precipitation probability attribute
* bump env_canada version to 0.0.38 in manifest
* bump env_canada version to 0.0.38 in requirements
* Add support for percipiation probability
* formated project with black
* make sure prob is an int
* fix build break
* update usage to correct naming
* revert bad change and apply fix build break
* add tests
* Only process logbook timestamps for events we will keep
Since we group by minute we were previously processing
every timestamp. We can avoid this by making all the
minute checks use the unprocessed datetime since
the groupings will be the same regardless of timezone.
This reduces the number of datetime object recreations
by at least an order of magnitude.
This builds on #35822
Minimize the amount of data selected from
the database
Testing:
History API Response time for 1 day
Average of 10 runs with minimal_response
Before: 9.47s
After: 4.43s
* Add sensor platform for vicare (heatpump)
* Formatting and fixes
* Formatting and fixes 2
* Fixes and formatting 3
* Fixes and formatting 4
* Add binary_sensor and more sensors
This moves some more climate attributes to sensors and adds
binary_sensors
* Move ActiveError back to climate component
The data returned by ActiveError is more complex.
It takes further investigation on how to interpret it a s a binary sensor.
Therefore it is moved back as an attribute of the climate component
* Update PyViCare library
* PR changes
* PR changes 2
Co-authored-by: Hans Oischinger <hans.oischinger@gmail.com>
* Vera now polls for all status data, no only incremental.
Vera polling is not handled using hass event loops with proper backoffs.
* Using long polling.
* Addressing PR feedback.
* Addressing PR feedback.
Adding controller stop on config unload.
Since zigpy change to support bitmap classes, formatting string was incorrectly generated for the newly joined devices with SmartEnergy metering clusters.
Since zigpy change to support bitmap classes, formatting string was incorrectly generated for the newly joined devices with SmartEnergy metering clusters.
* add ip to discovery title of xiaomi miio gateway
* add flow title to identify multiple gateways by IP
* clearify gateway token
* black formatting
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* add ip to discovery title of xiaomi miio gateway
* add flow title to identify multiple gateways by IP
* clearify gateway token
* black formatting
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Add playbase as a model
* Sonos queue
* Match counting of the queue with service play_queue
* Add service remove_from_queue
* Change description of remove_from_queue
* Use ATTR_QUEUE_POSITION instead of ATTR_CURRENT_QUEUE_POSITION
* Removed queue and show queue_position only when playing local
* Add property queue_position
* Return None instead of -1
* Change docstring from -1 to None
* Update ZHA config flow Zigbee radio description
Update ZHA config flow Zigbee radio descriptions to match docs https://github.com/home-assistant/home-assistant.io/pull/13437
* Make protocol plus model names more readable for end-users
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Zigbee radio description simplified and examples listed in alphabetical order
* Fix exceptions.Unauthorized.permission type
* Use auth.permission consts more
* Auth typing improvements
* Helpers typing improvements
* Calculate self.state only once
* initial commit
* small corrections
* fix linting error
* add new files to coveragerc
* rename devolo_sensor to devolo_device
* use correct import
* use binary_switch platform
* use binary_switch platform
* add binary_sensor to coverage
* adjustments according PR review
* make super call easier to read
* use f-string instead of concatenating
* update docstrings - remove device_id property
* add will_remove_from_hass
* changed back to check for class in DEVICE_CLASSES
* created a flow that would go through everything as it was blocking the commit
and the cv rules prevent an input that would get to that flow
* moved DEFAULT_COVER_CLASS from const to cover
* Remove period from logging messages
* Save indentation using guard clauses
* Typo
* Walk other files
* Rewalk all files
* Not cleanup, but adding indicatd missing measurements
* Revert new sensors
* Bump python-synology to 0.8.2
* state_attributes to device_state_attributes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for showing text on Keba EV chargers
* Changed implementation to use the notify interface
* Removed stale references to set_text
* Clean up
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Allow configuration to specify a host name.
This will default to "synology", so the sensors would be named
sensor.synology_... which is the original implementation.
By specifying a name, which is required for multiple synology hosts,
you can then have sensor.hostA_... and sensor.hostB_...
* Get the base name for the sensors from the Synology DSM hostname
* Don't need the name for the config
* Added missing import
* Fixed another typo
* Removed definition of unused BASE_NAME
* Removed end of line to revert
* Moved for ordering
* add non-root container user
* fix dockerfile and homeassistant editable install
* just install in home directory
* less impactful default changes
* separate RUN for better layer caching
* use vscode-remote base image
* Fix SP2-CL (0x7544) sensor update
This device does not support get_energy(). We need to ignore the CommandNotSupportedError in the update method.
* Format with Black
* Only wrap code that throws with catch
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Sort the players_list attribute of the minecraft_server players_online sensor in order to eliminate uneccessary state updates and ease comparisons in state changes.
* Remove zeroconf options from homekit
homekit uses the system shared zeroconf instance which
made the interface choice option controlled by the
zeroconf integration setting.
* change to cv.deprecated
* adj
* fix remaining tests from original merge conflict
* remove invalidation_version
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Part 2 of 2 (breaking changes in part 2).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
* bump timeout to 1800s, adjust comment
* bump timeout to 1800s, adjust comment
* bump timeout to 4h
* bump timeout to 4h
* remove timeout failsafe
* remove timeout failsafe
* and the test
* and the test
* find the test that needs mocking
* find the test that needs mocking
* Revert "find the test that needs mocking"
This reverts commit 064e7787a8e9bc65df965530726fa1c41f8bcd36.
* Revert "find the test that needs mocking"
This reverts commit 064e7787a8e9bc65df965530726fa1c41f8bcd36.
* fix the one that was missed due to the conflict
* Add switch component
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Improvements by @bdraco
Co-authored-by: J. Nick Koston <nick@koston.org>
* Stable device id when a deleted device is restored.
* Tweak
* Store only basic data for deleted devices
* Simplify code
* Simplify code
* Address review comments.
* Improve test
* Fix missing save
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Address review comments
* bump timeout to 1800s, adjust comment
* bump timeout to 4h
* remove timeout failsafe
* and the test
- add Synology DSM Security binary sensor (enabled by default)
- use device name instead of id in names
- add device type to name
- show disk manufacturer, model and firmware version in devices
- some entries are disabled by default (`entity_registry_enabled_default`)
- binary sensor + sensor uses `device_class` when possible
- do not fetch a concerned API if all entries of it are disabled
- entity unique_id now uses key instead of label
- entity entity_id changes for disk and volume: example from `sensor.synology_status_sda` to `sensor.synology_drive_1_status`, or from `sensor.synology_average_disk_temp_volume_1` to `sensor.synology_volume_1_average_disk_temp`
- now binary sensor:
- disk_exceed_bad_sector_thr
- disk_below_remain_life_thr
- removed sensor:
- volume type (RAID, SHR ...)
- disk name (Drive [X])
- disk device (/dev/sd[Y])
* Re-add connections to device_info
* Fix typo in identifiers
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Support stream profile and configuring it through options flow
* Options flow test
* Allow configuration of not using a stream profile
* Shorten default stream profile string
The OpenCV image_processing component accepts a `min_size` argument in
each classifier that is then passed into the OpenCV library. The
`min_size` argument is expected to be a tuple of 2 ints, and is entered
into the platofrm schema as such. However, yaml will always produce a
list instead of a tuple, which means in practice it's impossible to use
the `min_size` argument. This changes the schema to accepts any sequence
of 2 ints that is then coerced into a tuple suitable for passing to the
OpenCV library.
* Improve configuration
* Read new properties for basic device information
Improve tests by mocking less improving stability of tests
* Clean up in device tests
* Support new port management api
* Improve initializing data
* Bump dependency to v28
It is not correct to show warning about "unexpected event type" if EVENT_STATE_CHANGED have no new_state field.
We should show this warning only if it is real unexpected event type.
Run task_done() before continue, because we should tell the queue that the processing on the task is complete
after get().
* Use CONF_CLIENT_ID & CONF_CLIENT_SECRET from homeassistant.const
* Fix pylint
* Use in tests
* Search for "client_id"
* Fix tests
* Fix test
* Fix test
* Periodicly log when intergrations are taking a while to setup
When one or more intergrations are taking a while to setup
it is hard to determine which one is the cause. We can
help narrow this down for the user with a periodic log
message about which domains are still waiting to be setup
every 30s.
* 30 -> 60 per discussion
* only log when the integration is actually doing setup
* reduce, fix race in test
* Requires 0.7.18 of elkm1 library to decode LD messages, and uses those messages to reliably set the arming/disarming user when there are more than one area. See https://github.com/home-assistant/core/issues/35310.
* Fixed typo
* Fixed off by one error -- LD command reports 1-based user-numbers which is the changed_by_id we want, but we need 0-based indices as argument to username.
* Bump required version of elkm1, remove logging message I was using for testing; prepping for PR.
* Black formatted
* Fixed bug whereby I needed to ref elements when running against released build of elkm1-lib
* Check that due date is not None
Check that due date is not None, prevents taks without due dates from breaking Calendar API
* Invert None check to reduce indentation
* Add ability to ignore heos discovery
* Fetch player_id, update tests
* Handle failure state
* Update tests as there are two players in the mock now
* Adjust and add more tests
* Strip out player id lookup
* reverts per review
* one more revert
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Fix formatting for pyupgrade
* Update homeassistant/components/plugwise/__init__.py
Co-Authored-By: Robert Svensson <Kane610@users.noreply.github.com>
* Add try/except on setup
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Readd already reviewd await try/except
* Readd already reviewed config_flow
* Fix pylint
* Fix per 0.109 translations
* Remove unused import from merge
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Bump module version
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Fix pylint
* Fix per 0.109 translations
* Translations and config_flow, module version bump with required changes
* Translations and config_flow, module version bump with required changes
* Fix requirements
* Fix requirements
* Fix pylint
* Fix pylint
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Include configentrynotready on import
* Update __init__.py
* DataUpdateCoordinator and comment non-PR-platforms
* Fix reqs
* Rename devices variable in favor of entities
* Rework updates with DataUpdateCoordinator
* Peer review
* Peer review second part
* Cleanup comments and redundant code
* Added required config_flow test
* Peer review third part
* Update service was replaced by DataUpdateCoordinator
* Corrected testing, version bump for InvalidAuth, move uniq_id
* Remove according to review
* Await connect (py38)
* Remove unneccesary code
* Show only when multiple
* Improve config_flow, rename consts
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Process review comments
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add support for Insteon 2444-222 Micro Open/Close Module
* Avoid breaking changes on cover
* Update homeassistant/components/isy994/cover.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Proceed with startup if an integration setup blocks for more than 30m
* Fix test location
* Fix log call
* naming
* revert
* do not shield from cancelation
* Adjust test since we now cancel when we hit the timeout
* added optional argument to command service
* Fixed crash when optional argument is not provided
* Updated argument description
* fixed lint error
* Fix isort error
* switched to use dict for optional field instead of json string
* switched to use ATTR_PAYLOAD
* fixed test
* actually fixed test
* Improve history api performance
A new option "minimal_response" reduces the amount of data
sent between the first and last history states to only the
"last_changed" and "state" fields.
Calling to_native is now avoided where possible and only
done at the end for rows that will be returned in the response.
When sending the `minimal_response` option, the history
api now returns a json response similar to the following
for an entity
Testing:
History API Response time for 1 day
Average of 10 runs with minimal_response
Before: 19.89s. (content length : 3427428)
After: 8.44s (content length: 592199)
```
[{
"attributes": {--TRUNCATED--},
"context": {--TRUNCATED--},
"entity_id": "binary_sensor.powerwall_status",
"last_changed": "2020-05-18T23:20:03.213000+00:00",
"last_updated": "2020-05-18T23:20:03.213000+00:00",
"state": "on"
},
...
{
"last_changed": "2020-05-19T00:41:08Z",
"state": "unavailable"
},
...
{
"attributes": {--TRUNCATED--},
"context": {--TRUNCATED--},
"entity_id": "binary_sensor.powerwall_status",
"last_changed": "2020-05-19T00:42:08.069698+00:00",
"last_updated": "2020-05-19T00:42:08.069698+00:00",
"state": "on"
}]
```
* Remove impossible state check
* Remove another impossible state check
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Reorder to save some indent per review
* Make query response make sense with to_native=False
* Update test for 00:00 to Z change
* Update homeassistant/components/recorder/models.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add fan platform
* Add fan discovery schema
* Use constants for dispatcher signal
* Move fan platform to ozw
* Fix fan discovery schema
* Add previous speed to handle value 255
* Make fixture reading more robust
* Add fan tests
* Remove not needed fixture info
* Validate speed
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Decouple media lookup from play_media service
* More explicit input/search validation, cleanup, more tests
* Minor cleanup
* Normalize media_type string in lookup call
* Move key lookup, add tests via service calls
* Always allow play_media service calls
* No need to pass arguments to nested functions
* Add ability to ignore heos discovery
* Fetch player_id, update tests
* Handle failure state
* Update tests as there are two players in the mock now
* Adjust and add more tests
* Strip out player id lookup
* reverts per review
* one more revert
* Check that due date is not None
Check that due date is not None, prevents taks without due dates from breaking Calendar API
* Invert None check to reduce indentation
* Add support for Elexa Guardian water valve controllers
* Zeroconf + cleanup
* Sensors and services
* API registration
* Service bug fixes
* Fix bug in cleanup
* Tests and coverage
* Fix incorrect service description
* Bump aioguardian
* Bump aioguardian to 0.2.2
* Bump aioguardian to 0.2.3
* Proper entity inheritance
* Give device a proper name
* Code review
* add tests
* better error handling in dependency
* dont suppress errors
* add support for multiple devices
* add test for Unauthorized status
* raise error on service call failure
* add last_update_success_time and a failed update interval
* add failed update interval annd valid times to nws
* Revert "add last_update_success_time and a failed update interval"
This reverts commit 09428c9686.
* extend DataUpdateCoordinator
By default media players get a chrome cast icon, which feels
quite wrong for my old style amplifier that doesn't have any
connection to the rest of the word, except for a RS232 port.
* Working PoC
* Store
* Handle subscribing to MQTT and stopping stream when first telegram arrives
* Improve naming
* Now with test
* Better strings
* Fix Martins comments
* Improve mock device patching
* Bump dependency to v27
Add MQTT as after dependency
* Ensure a deleted intergration can be removed
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for Velux Gates
* Comment expanded and listing sorted alphabetically.
* There are constants in the cover entity integration for the valid device classes. Import and use those here.
* Blank line deleted
* Reformate code because of "CheckFormat" error
* Import only the names we need instead of the whole module
* Reformate code because of "CheckFormat" error
* isort error
* fallback to device serial number if no mac available
* make password optional to fix#35904
* update tests to reflect new flow
* fix snake case and AsyncMock
* add comments around why weird things are being done
* Centralite specific control seq of operation
* Remove Fan safeguards
* Split hvac_action property.
* Refactor hvac_action property.
Current hvac_action logic is Zen Within thermostat specific and differs
a bit from ZCL specs. Implement it as a separate class.
* Refactor hvac_action property for default thermostat
Follow more closely ZCL specs in parsing hvac state of the thermostat.
* allow lib to create AsyncTransport
* fix transport close issue
* fix zoom only cameras without PTZ presets
* catch profiles without encoding configuration
* also catch ServerDisconnectedError for ptz
* Ensure HomeAssistant can startup if homekit fails to load
* Update homeassistant/components/logbook/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial ZHA climate implementation.
* Add retryable_request decorator.
sort helpers imports.
* Check manufacturer for Climate implementation.
* Default zha.climate.operation_list to [Off]
* Migrate to climate 1.0
* Sort imports, properties and methods.
* Handle 'PRESET_NONE' presets.
* Use pi_heating/cooling_demand for HVAC action prop.
* Implement `running_state` HVAC channel property.
For ZHA thermostats which don't support `pi_heating_demand` or
`pi_cooling_demand' attributes.
* wip fan support
* Refactor retryable request logging.
* Rebase cleanup.
* Update climate discovery.
* Fix ZHA climate restoration.
* Bulk configure attribute reports.
* Use configure_reporting_multiple command for Light
More detailed response parsing of configure_reporting_multiple.
* Use ordered list for HVAC cluster attribute reports.
* Don't mutilate HVAC mode list.
* Add fan_mode property to fan channel.
* Fix type hinting.
* Expose fan mode only.
* Implement fan mode setting.
Drop support for HVAC_FAN_ONLY mode.
* Use ClimateEntity as base class.
* Cleanup debug code.
* Update time display for Sinope.
* Don't do many retries.
* Don't use multi attr reporting configuration.
* Make tests pass.
* Drop support for setpoint change source/amount.
* Cleanups.
* Drop aux heat
* Update tests.
* Drop Sinope temperature display code.
* Update tests.
* Refactor temperature setting.
* Update tests.
* Update Fan tests.
* Lint
* Black.
* Use correct logging levels
* Add services remote_set_led_on/remote_set_led_off to control changmi_ir led
* pylint: elif => if
* Fix services.async_register => platform.async_register_entity_service
* Update homeassistant/components/xiaomi_miio/remote.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* more fixes
* async
* more fixes
* fix
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Async remove call removed too much, resulting in disabled entities coming back after a restart
* Calling super().async_remove is no longer needed, changed to self.async_remove
* Yes, they should be sets...
The database fields are timezoned via DateTime(timezone=True), so the
default value should be timezoned too. When using cockroachdb this is
fatal and results in the recorder crashing.
* Fire events on homekit TV remote key press
* Changes from code review
* black
* isort
* flake8
* Update tests/components/homekit/test_type_media_players.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update to garminconnect 0.1.13
This will fix body composition sensors being unavailable
* Update requirements_all to garminconnect 0.1.13
* Update requirements_test_all.txt
* Avoid a context switch in the history api
The history api was creating a job to fetch the
states and another job to convert the states to
json. This can be done in a single job which
decreases the overhead of the operation.
* Ensure there is only one sqlalchemy session created per history
query.
Most queries created three sqlalchemy sessions which was
especially slow with sqlite since it opens and closes the
database.
In testing the UI is noticeably faster at generating history
graphs for entites.
* Add additional coverage
* pass hass first to _states_to_json and _get_significant_states
* Avoid a context switch in the history api
The history api was creating a job to fetch the
states and another job to convert the states to
json. This can be done in a single job which
decreases the overhead of the operation.
* Revert to original solution to avoid function redefine each call
* add BleBox lights support
* cherry pick refactoring from #35552
* Inherit from LightEntity instead of Light
Co-authored-by: J. Nick Koston <nick@koston.org>
* import LightEntity instead of Light
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* PyWeMo version bump to 0.4.43
Changes necessary to safely upgrade to pyWeMo 0.4.43. This includes catching ActionExceptions that may be thrown by pyWeMo when it is unable to interact with a physical device.
* Black formatting fix
* Fix isort issues
* Code review changes
* More code review fixes
* Linting fix
* Undo dict.get change
* Change a couple instances of dict[key] to dict.get
* Add and use ELECTRICAL_CURRENT_AMPERE constant
* Add and use ELECTRICAL_VOLTAGE_AMPERE constant
* Rename ELECTRICAL_VOLTAGE_AMPERE to ELECTRICAL_VOLT_AMPERE
* Fix imports
* Migrate to pyinsteon from insteonplm
* Rename devices entities
* Print ALDB even if not loaded
* Add relay to name map
* Change insteonplm to pyinsteon
* Update requirements_all correctly
* Code review updates
* async_set_speed receive std speed value
* default speed to std medium value
* Call async methods for fan on/off
* Comment await required in loop
* Remove emtpy and add codeowner
* Make services async and remove async_add_job call
* Remove extra logging
* New device as async task and aldb load in loop
* Place lock in context bloxk
* Limiting lock to min
* Remove .env file
* Avoid locking in the logging queue handler
We do not need a lock here as the underlying queue is already
thread safe.
* Add coverage for logging handle
* First cut of Rollease Acmeda Pulse Hub integration.
* Acmeda integration improvements:
- Moved common code into a base entity
- Battery level sensor added
- Localisation now working
* Added requirement for aiopulse now that it has been uploaded to PyPI.
* Exclude acmeda integration from coverage check as it relies on a hub being present.
* Fix Travis CI build issues.
* Remove unused constants.
* Remove unused group logic from cover.py
* Removed commented code from base.py
* Remove sensors (battery entities) on removal of hub.
* Remove unused groups from sensor.py
* Acmeda device and entity update made fully asynchronous using subscriptions to remove need for config polling.
* Updated aiopulse version dependency.
Removed non-functional battery charging indication.
* Rationalised common code to update entities into helpers.py
* Fix linting issue.
* Correct additional CI pylint errors.
* Index config_entries by entry_id.
Move entity loading and unloading to __init__.py
Add entry_id to dispatcher signal
Removed now unused polling code hub
Added config_flow unit tests
* Tweak to integration config_entry title.
* Bumped aiopulse module to 0.3.2.
Reduced verbosity of aiopulse module.
* Changed to using direct write of device state.
Removed old style async_step_init config_flow step.
* Remove superfluous battery_level and device_state_attributes from battery entity.
* Removal of unused strings.
Removal of unused create_config_flow helper.
Removal of stale comment.
* Remove use of shared container to track existing enities.
Moved removal and deregistration of entities to base class through use of dispatch helper.
* Fixed strings.json
* Fix incorrect use of remove instead of pop on dict.
* Add support for tilting covers, bump aiopulse version number.
* Bump aiopulse version to v0.3.4.
Fixed bug in cover supported_features.
* Bumped aiopulse version to 0.4.0
Update acmeda .coveragerc exclusions
* Removed already configured hub check from __init__.py async_setup_entry
Removed passing in hass reference to base entity class
Renamed entity async_reset to async_will_remove_from_hass
Changed device_info and properties
Migrated to CoveEntity from CoverDevice
Added dispatched_connect cleanup on hub removal
Removed unused entries from manifest
Removed override of battery icon
Renamed translations folder
* Reversed unintended change to .coveragerc
* Fixed config flow for multi-hub discovery.
* Acmeda enhancements as requested by MartinHjelmare
* Force import to connect to hub to retrieve id prior to creating entry
* Remove YAML configuration support.
* Tidied up config_flow and tests:
- removed unnecessary steps
- fixed typos
* Removed storage of hub in config_flow.
* add config option to set timeout for wiffi devices
Wiffi devices allow to configure the update period (=
full_loop_minutes). The integration shall respect the configured update
period and therefore need a configuration for the timeout, too.
* Move timeout from config flow to option flow
* add test for option flow
* Add support for "Window covering controller"
Some window cover devices such as Sunricher SR-ZG9080A are identified in deconz as "Window covering controller".
We need to include this device type in const.py to be integrated as type "cover" in home-assistant.
* Added Window covering controller to deconz tests
* Prevent updater from delaying startup
The updater sometimes times out as seen in
#33833 and the linked issues. The issue was
presenting again today as it appears the service
is overloaded again.
* s/hass.loop/asyncio/g
* Add config flow to gogogate2 component.
* Using a more stable gogogate api.
* Getting config flows working better by using different downstream library.
* Fixing options not getting default values.
Adding availability to cover entity.
* Simplifying return types of function.
* Address PR feedback.
* Making user config flow not abort.
* Using DataUpdateCoordinator.
* Addressing PR feedback.
* Using standard method for using hass.data
* Split auth fail test into separate tests.
* Use built in queue log handlers to avoid formatting logs in the event loop
Logging is now formatted and written in another thread to
ensure there is minimal impact on the event loop when
a log message is processed.
This change replaces the existing AsyncHandler log handler
as python 3.7+ now offers an off the shelf solution
* add a simple test
* s/async_migrate_log_handlers_to_queue/async_activate_log_queue_handler/g
* Add device triggers to support setting turn_on event
* Add turn on event
* Add unique_id based on config entry
* Adjust tests for addition of uuid
* Supported features are now always same
* Switch to player_setup fixture that actually start platform
* Update homeassistant/components/arcam_fmj/const.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* openwindow0: this is the part for the HA itself
* Update homeassistant/components/tado/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/tado/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* new version after review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Provide yeelight unique_id using ssdp discovery
* Fixes
* Comment fix
* Cleanup initialization logic and add unique id to binary sensor
* Update homeassistant/components/yeelight/__init__.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update homeassistant/components/yeelight/__init__.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update comment
* Update comment
* Fix wrong model docstring
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix for creating the device name
Creating the devicename included a typo and was missing the custom (preferred) name set by the OZW Admin tool.
* update comments
"description":"If you need help with the configuration have a look here: https://www.home-assistant.io/integrations/accuweather/\n\nSome sensors are not enabled by default. You can enable them in the entity registry after the integration configuration.\nWeather forecast is not enabled by default. You can enable it in the integration options.",
"description":"Due to the limitations of the free version of the AccuWeather API key, when you enable weather forecast, data updates will be performed every 64 minutes instead of every 32 minutes.",
"single_instance_allowed":"Ja configurat. Nom\u00e9s \u00e9s possible una sola configuraci\u00f3."
},
"error":{
"cannot_connect":"Ha fallat la connexi\u00f3",
"invalid_api_key":"Clau API inv\u00e0lida",
"requests_exceeded":"S'ha superat el nombre m\u00e0xim de sol\u00b7licituds permeses a l'API d'AccuWeather. Has d'esperar-te o canviar la clau API."
},
"step":{
"user":{
"data":{
"api_key":"Clau API",
"latitude":"Latitud",
"longitude":"Longitud",
"name":"Nom de la integraci\u00f3"
},
"description":"Si necessites ajuda amb la configuraci\u00f3, consulta els seg\u00fcent enlla\u00e7: https://www.home-assistant.io/integrations/accuweather/ \n\n Alguns sensors no estan activats de manera predeterminada. Els pots activar des del registre d'entitats, despr\u00e9s de la configurraci\u00f3 de la integraci\u00f3.\n La previsi\u00f3 meteorol\u00f2gica no est\u00e0 activada de manera predeterminada. Pots activar-la en les opcions de la integraci\u00f3.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Previsi\u00f3 meteorol\u00f2gica"
},
"description":"Per culpa de les limitacions de la versi\u00f3 gratu\u00efta l'API d'AccuWeather, quan habilitis la previsi\u00f3 meteorol\u00f2gica, les actualitzacions es realitzaran cada 64 minuts en comptes de 32.",
"single_instance_allowed":"Already configured. Only a single configuration possible."
},
"error":{
"cannot_connect":"Failed to connect",
"invalid_api_key":"Invalid API key",
"requests_exceeded":"The allowed number of requests to Accuweather API has been exceeded. You have to wait or change API Key."
},
"step":{
"user":{
"data":{
"api_key":"API Key",
"latitude":"Latitude",
"longitude":"Longitude",
"name":"Name of the integration"
},
"description":"If you need help with the configuration have a look here: https://www.home-assistant.io/integrations/accuweather/\n\nSome sensors are not enabled by default. You can enable them in the entity registry after the integration configuration.\nWeather forecast is not enabled by default. You can enable it in the integration options.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Weather forecast"
},
"description":"Due to the limitations of the free version of the AccuWeather API key, when you enable weather forecast, data updates will be performed every 64 minutes instead of every 32 minutes.",
"single_instance_allowed":"Ya est\u00e1 configurado. S\u00f3lo es posible una \u00fanica configuraci\u00f3n."
},
"error":{
"cannot_connect":"No se pudo conectar",
"invalid_api_key":"Clave API no v\u00e1lida",
"requests_exceeded":"Se ha excedido el n\u00famero permitido de solicitudes a la API de Accuweather. Tienes que esperar o cambiar la Clave API."
},
"step":{
"user":{
"data":{
"api_key":"Clave API",
"latitude":"Latitud",
"longitude":"Longitud",
"name":"Nombre de la integraci\u00f3n"
},
"description":"Si necesitas ayuda con la configuraci\u00f3n, echa un vistazo aqu\u00ed: https://www.home-assistant.io/integrations/accuweather/ \n\nEl pron\u00f3stico del tiempo no est\u00e1 habilitado por defecto. Puedes habilitarlo en las opciones de la integraci\u00f3n.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Pron\u00f3stico del tiempo"
},
"description":"Debido a las limitaciones de la versi\u00f3n gratuita de la clave API de AccuWeather, cuando habilitas el pron\u00f3stico del tiempo, las actualizaciones de datos se realizar\u00e1n cada 64 minutos en lugar de cada 32 minutos.",
"single_instance_allowed":"Sidumine juba tehtud. V\u00f5imalik on ainult 1 sidumine,"
},
"error":{
"cannot_connect":"\u00dchendus eba\u00f5nnestus",
"invalid_api_key":"API v\u00f5ti on vale",
"requests_exceeded":"Accuweatheri API-le esitatud p\u00e4ringute piirarv on \u00fcletatud. Peate ootama (v\u00f5i muutma API v\u00f5tit)."
},
"step":{
"user":{
"data":{
"api_key":"API v\u00f5ti",
"latitude":"Laiuskraad",
"longitude":"Pikkuskraad",
"name":"Sidumise nimi"
},
"description":"Kui vajate seadistamisel abi vaadake siit: https://www.home-assistant.io/integrations/accuweather/ \n\n M\u00f5ni andur pole vaikimisi lubatud. P\u00e4rast sidumise seadistamist saate need \u00fcksused lubada. \n Ilmapennustus pole vaikimisi lubatud. Saate selle lubada sidumise s\u00e4tetes.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Ilmateade"
},
"description":"AccuWeather API tasuta versioonis toimub ilmaennustuse lubamisel andmete v\u00e4rskendamine iga 32 minuti asemel iga 64 minuti j\u00e4rel.",
"single_instance_allowed":"D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
},
"error":{
"cannot_connect":"\u00c9chec de connexion",
"invalid_api_key":"Cl\u00e9 API invalide",
"requests_exceeded":"Le nombre autoris\u00e9 de requ\u00eates adress\u00e9es \u00e0 l'API AccuWeather a \u00e9t\u00e9 d\u00e9pass\u00e9. Vous devez attendre ou modifier la cl\u00e9 API."
},
"step":{
"user":{
"data":{
"api_key":"Cl\u00e9 d'API",
"latitude":"Latitude",
"longitude":"Longitude",
"name":"Nom de l'int\u00e9gration"
},
"description":"Si vous avez besoin d'aide pour la configuration, consultez le site suivant : https://www.home-assistant.io/integrations/accuweather/\n\nCertains capteurs ne sont pas activ\u00e9s par d\u00e9faut. Vous pouvez les activer dans le registre des entit\u00e9s apr\u00e8s la configuration de l'int\u00e9gration.\nLes pr\u00e9visions m\u00e9t\u00e9orologiques ne sont pas activ\u00e9es par d\u00e9faut. Vous pouvez l'activer dans les options d'int\u00e9gration.",
"description":"En raison des limitations de la version gratuite de la cl\u00e9 API AccuWeather, lorsque vous activez les pr\u00e9visions m\u00e9t\u00e9orologiques, les mises \u00e0 jour des donn\u00e9es seront effectu\u00e9es toutes les 64 minutes au lieu de toutes les 32 minutes.",
"single_instance_allowed":"Gi\u00e0 configurato. \u00c8 possibile una sola configurazione."
},
"error":{
"cannot_connect":"Impossibile connettersi",
"invalid_api_key":"Chiave API non valida",
"requests_exceeded":"\u00c8 stato superato il numero consentito di richieste all'API di Accuweather. \u00c8 necessario attendere o modificare la chiave API."
},
"step":{
"user":{
"data":{
"api_key":"Chiave API",
"latitude":"Latitudine",
"longitude":"Logitudine",
"name":"Nome dell'integrazione"
},
"description":"Se hai bisogno di aiuto con la configurazione dai un'occhiata qui: https://www.home-assistant.io/integrations/accuweather/ \n\nAlcuni sensori non sono abilitati per impostazione predefinita. \u00c8 possibile abilitarli nel registro entit\u00e0 dopo la configurazione di integrazione. \nLe previsioni meteo non sono abilitate per impostazione predefinita. Puoi abilitarle nelle opzioni di integrazione.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Previsioni meteo"
},
"description":"A causa delle limitazioni della versione gratuita della chiave API AccuWeather, quando si abilitano le previsioni del tempo, gli aggiornamenti dei dati verranno eseguiti ogni 64 minuti invece che ogni 32 minuti.",
"single_instance_allowed":"Scho konfigur\u00e9iert. N\u00ebmmen eng eenzeg Konfiguratioun ass m\u00e9iglech."
},
"error":{
"cannot_connect":"Feeler beim verbannen",
"invalid_api_key":"Ong\u00ebltegen API Schl\u00ebssel",
"requests_exceeded":"D\u00e9i zougelooss Zuel vun Ufroen un Accuweather API gouf iwwerschratt. Du muss ofwaarden oder den API Schl\u00ebssel \u00e4nneren."
},
"step":{
"user":{
"data":{
"api_key":"API Schl\u00ebssel",
"latitude":"Breedegrad",
"longitude":"L\u00e4ngegrad",
"name":"Numm vun der Integratioun"
},
"description":"Falls du H\u00ebllef mat der Konfiguratioun brauch kuck h\u00e9i:\nhttps://www.home-assistant.io/integrations/accuweather/\n\nWieder Pr\u00e9visounen si standardm\u00e9isseg net aktiv. Du kanns d\u00e9i an den Optioune vun der Integratioun aschalten.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Wieder Pr\u00e9visioun"
},
"description":"Duerch d'Limite vun der Gratis Versioun vun der AccuWeather API, wann d'Wieder Pr\u00e9visoune aktiv\u00e9iert sinn, ginn d'Aktualis\u00e9ierungen all 64 Minutten gemaach, am plaatz vun all 32 Minutten.",
"single_instance_allowed":"Allerede konfigurert. Bare \u00e9n enkelt konfigurasjon er mulig."
},
"error":{
"cannot_connect":"Tilkobling mislyktes.",
"invalid_api_key":"Ugyldig API-n\u00f8kkel",
"requests_exceeded":"Det tillatte antallet foresp\u00f8rsler til Accuweather API er overskredet. Du m\u00e5 vente eller endre API-n\u00f8kkel."
},
"step":{
"user":{
"data":{
"api_key":"API-n\u00f8kkel",
"latitude":"Breddegrad",
"longitude":"Lengdegrad",
"name":"Navn p\u00e5 integrasjon"
},
"description":"Hvis du trenger hjelp med konfigurasjonen, kan du se her: https://www.home-assistant.io/integrations/accuweather/ \n\n Noen sensorer er ikke aktivert som standard. Du kan aktivere dem i enhetsregisteret etter integrasjonskonfigurasjonen. \n V\u00e6rmelding er ikke aktivert som standard. Du kan aktivere det i integrasjonsalternativene.",
"title":""
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"V\u00e6rmelding"
},
"description":"P\u00e5 grunn av begrensningene i gratisversjonen av AccuWeather API-n\u00f8kkelen, n\u00e5r du aktiverer v\u00e6rmelding, vil dataoppdateringer bli utf\u00f8rt hvert 64. minutt i stedet for hvert 32. minutt.",
"requests_exceeded":"Dozwolona liczba zapyta\u0144 do interfejsu API AccuWeather zosta\u0142a przekroczona. Musisz poczeka\u0107 lub zmieni\u0107 klucz API."
"description":"Je\u015bli potrzebujesz pomocy z konfiguracj\u0105, przejd\u017a na stron\u0119: https://www.home-assistant.io/integrations/accuweather/ \n\nCz\u0119\u015b\u0107 sensor\u00f3w nie jest w\u0142\u0105czona domy\u015blnie. Mo\u017cesz je w\u0142\u0105czy\u0107 w rejestrze encji po konfiguracji integracji.\nPrognoza pogody nie jest domy\u015blnie w\u0142\u0105czona. Mo\u017cesz j\u0105 w\u0142\u0105czy\u0107 w opcjach integracji.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Prognoza pogody"
},
"description":"Ze wzgl\u0119du na ograniczenia darmowej wersji klucza API AccuWeather po w\u0142\u0105czeniu prognozy pogody aktualizacje danych b\u0119d\u0105 wykonywane co 64 minut zamiast co 32 minut.",
"description":"Devido \u00e0s limita\u00e7\u00f5es da vers\u00e3o gratuita da chave da API AccuWeather, quando voc\u00ea habilita a previs\u00e3o do tempo, as atualiza\u00e7\u00f5es de dados ser\u00e3o realizadas a cada 64 minutos em vez de a cada 32 minutos."
"requests_exceeded":"\u5df2\u8d85\u904e Accuweather API \u5141\u8a31\u7684\u8acb\u6c42\u6b21\u6578\u3002\u5fc5\u9808\u7b49\u5019\u6216\u8b8a\u66f4 API \u5bc6\u9470\u3002"
"title":"W\u00e4hlen Sie einen Hub zum Hinzuf\u00fcgen aus"
}
}
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
