Merge pull request #45156 from home-assistant/rc

* Fix neato battery sensor not ready

* Edit available attribute

* Remove unnecessary condition

.coveragerc

@@ -48,7 +48,9 @@ omit =
     homeassistant/components/anel_pwrctrl/switch.py
     homeassistant/components/anthemav/media_player.py
     homeassistant/components/apcupsd/*
-    homeassistant/components/apple_tv/*
+    homeassistant/components/apple_tv/__init__.py
+    homeassistant/components/apple_tv/media_player.py
+    homeassistant/components/apple_tv/remote.py
     homeassistant/components/aqualogic/*
     homeassistant/components/aquostv/media_player.py
     homeassistant/components/arcam_fmj/media_player.py
@@ -65,11 +67,12 @@ omit =
     homeassistant/components/asterisk_mbox/*
     homeassistant/components/aten_pe/*
     homeassistant/components/atome/*
+    homeassistant/components/aurora/__init__.py
+    homeassistant/components/aurora/binary_sensor.py
+    homeassistant/components/aurora/const.py
     homeassistant/components/aurora_abb_powerone/sensor.py
     homeassistant/components/avea/light.py
     homeassistant/components/avion/light.py
-    homeassistant/components/avri/const.py
-    homeassistant/components/avri/sensor.py
     homeassistant/components/azure_devops/__init__.py
     homeassistant/components/azure_devops/const.py
     homeassistant/components/azure_devops/sensor.py
@@ -97,7 +100,12 @@ omit =
     homeassistant/components/bme280/sensor.py
     homeassistant/components/bme680/sensor.py
     homeassistant/components/bmp280/sensor.py
-    homeassistant/components/bmw_connected_drive/*
+    homeassistant/components/bmw_connected_drive/__init__.py
+    homeassistant/components/bmw_connected_drive/binary_sensor.py
+    homeassistant/components/bmw_connected_drive/device_tracker.py
+    homeassistant/components/bmw_connected_drive/lock.py
+    homeassistant/components/bmw_connected_drive/notify.py
+    homeassistant/components/bmw_connected_drive/sensor.py
     homeassistant/components/braviatv/__init__.py
     homeassistant/components/braviatv/const.py
     homeassistant/components/braviatv/media_player.py
@@ -259,6 +267,11 @@ omit =
     homeassistant/components/fibaro/*
     homeassistant/components/filesize/sensor.py
     homeassistant/components/fints/sensor.py
+    homeassistant/components/fireservicerota/__init__.py
+    homeassistant/components/fireservicerota/binary_sensor.py
+    homeassistant/components/fireservicerota/const.py
+    homeassistant/components/fireservicerota/sensor.py
+    homeassistant/components/fireservicerota/switch.py
     homeassistant/components/firmata/__init__.py
     homeassistant/components/firmata/binary_sensor.py
     homeassistant/components/firmata/board.py
@@ -376,7 +389,6 @@ omit =
     homeassistant/components/hvv_departures/sensor.py
     homeassistant/components/hvv_departures/__init__.py
     homeassistant/components/hydrawise/*
-    homeassistant/components/hyperion/light.py
     homeassistant/components/iammeter/sensor.py
     homeassistant/components/iaqualink/binary_sensor.py
     homeassistant/components/iaqualink/climate.py
@@ -533,12 +545,16 @@ omit =
     homeassistant/components/minio/*
     homeassistant/components/mitemp_bt/sensor.py
     homeassistant/components/mjpeg/camera.py
-    homeassistant/components/mobile_app/*
     homeassistant/components/mochad/*
     homeassistant/components/modbus/climate.py
     homeassistant/components/modbus/cover.py
     homeassistant/components/modbus/switch.py
+    homeassistant/components/modbus/sensor.py
     homeassistant/components/modem_callerid/sensor.py
+    homeassistant/components/motion_blinds/__init__.py
+    homeassistant/components/motion_blinds/const.py
+    homeassistant/components/motion_blinds/cover.py
+    homeassistant/components/motion_blinds/sensor.py
     homeassistant/components/mpchc/media_player.py
     homeassistant/components/mpd/media_player.py
     homeassistant/components/mqtt_room/sensor.py
@@ -554,13 +570,21 @@ omit =
     homeassistant/components/n26/*
     homeassistant/components/nad/media_player.py
     homeassistant/components/nanoleaf/light.py
+    homeassistant/components/neato/__init__.py
+    homeassistant/components/neato/api.py
     homeassistant/components/neato/camera.py
     homeassistant/components/neato/sensor.py
     homeassistant/components/neato/switch.py
     homeassistant/components/neato/vacuum.py
     homeassistant/components/nederlandse_spoorwegen/sensor.py
     homeassistant/components/nello/lock.py
-    homeassistant/components/nest/*
+    homeassistant/components/nest/__init__.py
+    homeassistant/components/nest/api.py
+    homeassistant/components/nest/binary_sensor.py
+    homeassistant/components/nest/camera.py
+    homeassistant/components/nest/climate.py
+    homeassistant/components/nest/legacy/*
+    homeassistant/components/nest/sensor.py
     homeassistant/components/netatmo/__init__.py
     homeassistant/components/netatmo/api.py
     homeassistant/components/netatmo/camera.py
@@ -666,6 +690,7 @@ omit =
     homeassistant/components/pjlink/media_player.py
     homeassistant/components/plaato/*
     homeassistant/components/plex/media_player.py
+    homeassistant/components/plex/models.py
     homeassistant/components/plex/sensor.py
     homeassistant/components/plum_lightpad/light.py
     homeassistant/components/pocketcasts/sensor.py
@@ -708,6 +733,7 @@ omit =
     homeassistant/components/rainforest_eagle/sensor.py
     homeassistant/components/raspihats/*
     homeassistant/components/raspyrfm/*
+    homeassistant/components/recollect_waste/__init__.py
     homeassistant/components/recollect_waste/sensor.py
     homeassistant/components/recswitch/switch.py
     homeassistant/components/reddit/*
@@ -745,7 +771,6 @@ omit =
     homeassistant/components/russound_rnet/media_player.py
     homeassistant/components/sabnzbd/*
     homeassistant/components/saj/sensor.py
-    homeassistant/components/salt/device_tracker.py
     homeassistant/components/satel_integra/*
     homeassistant/components/schluter/*
     homeassistant/components/scrape/sensor.py
@@ -808,8 +833,9 @@ omit =
     homeassistant/components/solaredge_local/sensor.py
     homeassistant/components/solarlog/*
     homeassistant/components/solax/sensor.py
-    homeassistant/components/soma/cover.py
     homeassistant/components/soma/__init__.py
+    homeassistant/components/soma/cover.py
+    homeassistant/components/soma/sensor.py
     homeassistant/components/somfy/*
     homeassistant/components/somfy_mylink/*
     homeassistant/components/sonos/*
@@ -821,6 +847,7 @@ omit =
     homeassistant/components/spotcrime/sensor.py
     homeassistant/components/spotify/__init__.py
     homeassistant/components/spotify/media_player.py
+    homeassistant/components/spotify/system_health.py
     homeassistant/components/squeezebox/__init__.py
     homeassistant/components/squeezebox/browse_media.py
     homeassistant/components/squeezebox/media_player.py
@@ -935,7 +962,6 @@ omit =
     homeassistant/components/twilio_call/notify.py
     homeassistant/components/twilio_sms/notify.py
     homeassistant/components/twitter/notify.py
-    homeassistant/components/ubee/device_tracker.py
     homeassistant/components/ubus/device_tracker.py
     homeassistant/components/ue_smart_radio/media_player.py
     homeassistant/components/unifiled/*
@@ -989,7 +1015,6 @@ omit =
     homeassistant/components/watson_tts/tts.py
     homeassistant/components/waze_travel_time/sensor.py
     homeassistant/components/webostv/*
-    homeassistant/components/wemo/*
     homeassistant/components/whois/sensor.py
     homeassistant/components/wiffi/*
     homeassistant/components/wink/*
@@ -1054,7 +1079,6 @@ omit =
     homeassistant/components/zha/core/device.py
     homeassistant/components/zha/core/gateway.py
     homeassistant/components/zha/core/helpers.py
-    homeassistant/components/zha/core/patches.py
     homeassistant/components/zha/core/registries.py
     homeassistant/components/zha/core/typing.py
     homeassistant/components/zha/entity.py

.devcontainer/devcontainer.json

@@ -12,17 +12,21 @@
     "redhat.vscode-yaml",
     "esbenp.prettier-vscode"
   ],
+  // Please keep this file in sync with settings in home-assistant/.vscode/settings.default.json
   "settings": {
     "python.pythonPath": "/usr/local/bin/python",
     "python.linting.pylintEnabled": true,
     "python.linting.enabled": true,
     "python.formatting.provider": "black",
+    "python.testing.pytestArgs": ["--no-cov"],
+    "python.testing.pytestEnabled": true,
     "editor.formatOnPaste": false,
     "editor.formatOnSave": true,
     "editor.formatOnType": true,
     "files.trimTrailingWhitespace": true,
     "terminal.integrated.shell.linux": "/bin/bash",
     "yaml.customTags": [
+      "!input scalar",
       "!secret scalar",
       "!include_dir_named scalar",
       "!include_dir_list scalar",

.github/workflows/ci.yaml

@@ -25,7 +25,7 @@ jobs:
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore base Python virtual environment
@@ -48,7 +48,7 @@ jobs:
         run: |
           python -m venv venv
           . venv/bin/activate
-          pip install -U pip setuptools
+          pip install -U "pip<20.3" setuptools
           pip install -r requirements.txt -r requirements_test.txt
       - name: Restore pre-commit environment from cache
         id: cache-precommit
@@ -73,7 +73,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -118,7 +118,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -163,7 +163,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -230,7 +230,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -278,7 +278,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -326,7 +326,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -371,7 +371,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -419,7 +419,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -475,7 +475,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -555,7 +555,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v2.1.4
+        uses: actions/setup-python@v2.2.1
         id: python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
@@ -611,7 +611,7 @@ jobs:
         run: |
           python -m venv venv
           . venv/bin/activate
-          pip install -U pip setuptools wheel
+          pip install -U "pip<20.3" setuptools wheel
           pip install -r requirements_all.txt
           pip install -r requirements_test.txt
           pip install -e .
@@ -741,7 +741,7 @@ jobs:
             -p no:sugar \
             tests
       - name: Upload coverage artifact
-        uses: actions/upload-artifact@v2.2.0
+        uses: actions/upload-artifact@v2.2.1
         with:
           name: coverage-${{ matrix.python-version }}-group${{ matrix.group }}
           path: .coverage
@@ -785,4 +785,4 @@ jobs:
           coverage report --fail-under=94
           coverage xml
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v1.0.14
+        uses: codecov/codecov-action@v1.1.1

.github/workflows/stale.yml

@@ -12,7 +12,7 @@ jobs:
       # The 90 day stale policy
       # Used for: Everything (unless 30 day policy below beats it)
       - name: 90 days stale policy
-        uses: actions/stale@v3.0.13
+        uses: actions/stale@v3.0.14
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 90
@@ -48,7 +48,7 @@ jobs:
       # - Issues that are pending more information (incomplete issues)
       # - PRs that are not marked as new-integration
       - name: 30 days stale policy
-        uses: actions/stale@v3.0.13
+        uses: actions/stale@v3.0.14
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           # PRs have a CLA signed label, we can misuse it to apply this policy

.pre-commit-config.yaml

@@ -30,7 +30,7 @@ repos:
           - pydocstyle==5.1.1
         files: ^(homeassistant|script|tests)/.+\.py$
   - repo: https://github.com/PyCQA/bandit
-    rev: 1.6.2
+    rev: 1.7.0
     hooks:
       - id: bandit
         args:
@@ -48,6 +48,7 @@ repos:
       - id: check-executables-have-shebangs
         stages: [manual]
       - id: check-json
+        exclude: (.vscode|.devcontainer)
       - id: no-commit-to-branch
         args:
           - --branch=dev

.travis.yml

@@ -1,42 +0,0 @@
-dist: focal
-addons:
-  apt:
-    packages:
-      - ffmpeg
-      - libudev-dev
-      - libavformat-dev
-      - libavcodec-dev
-      - libavdevice-dev
-      - libavutil-dev
-      - libswscale-dev
-      - libswresample-dev
-      - libavfilter-dev
-
-python:
-  - "3.7.1"
-  - "3.8"
-
-env:
-  - TOX_ARGS="-- --test-group-count 4 --test-group 1"
-  - TOX_ARGS="-- --test-group-count 4 --test-group 2"
-  - TOX_ARGS="-- --test-group-count 4 --test-group 3"
-  - TOX_ARGS="-- --test-group-count 4 --test-group 4"
-
-jobs:
-  fast_finish: true
-  include:
-    - python: "3.7.1"
-      env: TOXENV=lint
-    - python: "3.7.1"
-      # PYLINT_ARGS=--jobs=0 disabled for now: https://github.com/PyCQA/pylint/issues/3584
-      env: TOXENV=pylint TRAVIS_WAIT=30
-    - python: "3.7.1"
-      env: TOXENV=typing
-
-cache:
-  pip: true
-  directories:
-    - $HOME/.cache/pre-commit
-install: pip install -U tox tox-travis
-language: python
-script: ${TRAVIS_WAIT:+travis_wait $TRAVIS_WAIT} tox -vv --develop ${TOX_ARGS-}

.vscode/launch.json

@@ -0,0 +1,49 @@
+{
+  // Use IntelliSense to learn about possible attributes.
+  // Hover to view descriptions of existing attributes.
+  // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
+  "version": "0.2.0",
+  "configurations": [
+    {
+      "name": "Home Assistant",
+      "type": "python",
+      "request": "launch",
+      "module": "homeassistant",
+      "args": [
+        "--debug",
+        "-c",
+        "config"
+      ]
+    },
+    {
+      // Debug by attaching to local Home Asistant server using Remote Python Debugger.
+      // See https://www.home-assistant.io/integrations/debugpy/
+      "name": "Home Assistant: Attach Local",
+      "type": "python",
+      "request": "attach",
+      "port": 5678,
+      "host": "localhost",
+      "pathMappings": [
+        {
+          "localRoot": "${workspaceFolder}",
+          "remoteRoot": "."
+        }
+      ],
+    },
+    {
+      // Debug by attaching to remote Home Asistant server using Remote Python Debugger.
+      // See https://www.home-assistant.io/integrations/debugpy/
+      "name": "Home Assistant: Attach Remote",
+      "type": "python",
+      "request": "attach",
+      "port": 5678,
+      "host": "homeassistant.local",
+      "pathMappings": [
+        {
+          "localRoot": "${workspaceFolder}",
+          "remoteRoot": "/usr/src/homeassistant"
+        }
+      ],
+    }
+  ]
+}

.vscode/settings.default.json

@@ -0,0 +1,9 @@
+{
+  // Please keep this file in sync with settings in home-assistant/.devcontainer/devcontainer.json
+  "python.formatting.provider": "black",
+  // Added --no-cov to work around TypeError: message must be set
+  // https://github.com/microsoft/vscode-python/issues/14067
+  "python.testing.pytestArgs": ["--no-cov"],
+  // https://code.visualstudio.com/docs/python/testing#_pytest-configuration-settings
+  "python.testing.pytestEnabled": true
+}

CODEOWNERS

@@ -37,6 +37,7 @@ homeassistant/components/amcrest/* @pnbruckner
 homeassistant/components/androidtv/* @JeffLIrion
 homeassistant/components/apache_kafka/* @bachya
 homeassistant/components/api/* @home-assistant/core
+homeassistant/components/apple_tv/* @postlund
 homeassistant/components/apprise/* @caronc
 homeassistant/components/aprs/* @PhilRW
 homeassistant/components/arcam_fmj/* @elupus
@@ -48,11 +49,11 @@ homeassistant/components/atag/* @MatsNL
 homeassistant/components/aten_pe/* @mtdcr
 homeassistant/components/atome/* @baqs
 homeassistant/components/august/* @bdraco
+homeassistant/components/aurora/* @djtimca
 homeassistant/components/aurora_abb_powerone/* @davet2001
 homeassistant/components/auth/* @home-assistant/core
 homeassistant/components/automation/* @home-assistant/core
 homeassistant/components/avea/* @pattyland
-homeassistant/components/avri/* @timvancann
 homeassistant/components/awair/* @ahayworth @danielsjf
 homeassistant/components/aws/* @awarecan
 homeassistant/components/axis/* @Kane610
@@ -116,7 +117,6 @@ homeassistant/components/dunehd/* @bieniu
 homeassistant/components/dwd_weather_warnings/* @runningman84 @stephan192 @Hummel95
 homeassistant/components/dweet/* @fabaff
 homeassistant/components/dynalite/* @ziv1234
-homeassistant/components/dyson/* @etheralm
 homeassistant/components/eafm/* @Jc2k
 homeassistant/components/ecobee/* @marthoc
 homeassistant/components/ecovacs/* @OverloadUT
@@ -131,6 +131,7 @@ homeassistant/components/emoncms/* @borpin
 homeassistant/components/emulated_kasa/* @kbickar
 homeassistant/components/enigma2/* @fbradyirl
 homeassistant/components/enocean/* @bdurrer
+homeassistant/components/enphase_envoy/* @gtdiehl
 homeassistant/components/entur_public_transport/* @hfurubotten
 homeassistant/components/environment_canada/* @michaeldavie
 homeassistant/components/ephember/* @ttroy50
@@ -144,6 +145,7 @@ homeassistant/components/ezviz/* @baqs
 homeassistant/components/fastdotcom/* @rohankapoorcom
 homeassistant/components/file/* @fabaff
 homeassistant/components/filter/* @dgomes
+homeassistant/components/fireservicerota/* @cyberjunky
 homeassistant/components/firmata/* @DaAwesomeP
 homeassistant/components/fixer/* @fabaff
 homeassistant/components/flick_electric/* @ZephireNZ
@@ -239,6 +241,7 @@ homeassistant/components/keyboard_remote/* @bendavid
 homeassistant/components/knx/* @Julius2342 @farmio @marvin-w
 homeassistant/components/kodi/* @OnFreund @cgtobi
 homeassistant/components/konnected/* @heythisisnate @kit-klein
+homeassistant/components/kulersky/* @emlove
 homeassistant/components/lametric/* @robbiet480
 homeassistant/components/launch_library/* @ludeeus
 homeassistant/components/lcn/* @alengwenus
@@ -275,6 +278,7 @@ homeassistant/components/mobile_app/* @robbiet480
 homeassistant/components/modbus/* @adamchengtkc @janiversen @vzahradnik
 homeassistant/components/monoprice/* @etsinko @OnFreund
 homeassistant/components/moon/* @fabaff
+homeassistant/components/motion_blinds/* @starkillerOG
 homeassistant/components/mpd/* @fabaff
 homeassistant/components/mqtt/* @home-assistant/core @emontnemery
 homeassistant/components/msteams/* @peroyvind
@@ -305,6 +309,7 @@ homeassistant/components/nsw_rural_fire_service_feed/* @exxamalte
 homeassistant/components/nuheat/* @bdraco
 homeassistant/components/nuki/* @pschmitt @pvizeli
 homeassistant/components/numato/* @clssn
+homeassistant/components/number/* @home-assistant/core @Shulyaka
 homeassistant/components/nut/* @bdraco
 homeassistant/components/nws/* @MatthewFlamm
 homeassistant/components/nzbget/* @chriscla
@@ -317,6 +322,7 @@ homeassistant/components/onewire/* @garbled1 @epenet
 homeassistant/components/onvif/* @hunterjm
 homeassistant/components/openerz/* @misialq
 homeassistant/components/opengarage/* @danielhiversen
+homeassistant/components/openhome/* @bazwilliams
 homeassistant/components/opentherm_gw/* @mvn23
 homeassistant/components/openuv/* @bachya
 homeassistant/components/openweathermap/* @fabaff @freekode @nzapponi
@@ -335,7 +341,7 @@ homeassistant/components/pi_hole/* @fabaff @johnluetke @shenxn
 homeassistant/components/pilight/* @trekky12
 homeassistant/components/plaato/* @JohNan
 homeassistant/components/plex/* @jjlawren
-homeassistant/components/plugwise/* @CoMPaTech @bouwew
+homeassistant/components/plugwise/* @CoMPaTech @bouwew @brefra
 homeassistant/components/plum_lightpad/* @ColinHarrington @prystupa
 homeassistant/components/point/* @fredrike
 homeassistant/components/poolsense/* @haemishkyd
@@ -349,6 +355,7 @@ homeassistant/components/ptvsd/* @swamp-ig
 homeassistant/components/push/* @dgomes
 homeassistant/components/pvoutput/* @fabaff
 homeassistant/components/pvpc_hourly_pricing/* @azogue
+homeassistant/components/qbittorrent/* @geoffreylagaisse
 homeassistant/components/qld_bushfire/* @exxamalte
 homeassistant/components/qnap/* @colinodell
 homeassistant/components/quantum_gateway/* @cisasteelersfan
@@ -360,6 +367,7 @@ homeassistant/components/raincloud/* @vanstinator
 homeassistant/components/rainforest_eagle/* @gtdiehl @jcalbert
 homeassistant/components/rainmachine/* @bachya
 homeassistant/components/random/* @fabaff
+homeassistant/components/recollect_waste/* @bachya
 homeassistant/components/rejseplanen/* @DarkFox
 homeassistant/components/repetier/* @MTrab
 homeassistant/components/rfxtrx/* @danielhiversen @elupus @RobBie1221
@@ -374,7 +382,6 @@ homeassistant/components/rpi_power/* @shenxn @swetoast
 homeassistant/components/ruckus_unleashed/* @gabe565
 homeassistant/components/safe_mode/* @home-assistant/core
 homeassistant/components/saj/* @fredericvl
-homeassistant/components/salt/* @bjornorri
 homeassistant/components/samsungtv/* @escoand
 homeassistant/components/scene/* @home-assistant/core
 homeassistant/components/schluter/* @prairieapps
@@ -398,6 +405,7 @@ homeassistant/components/simplisafe/* @bachya
 homeassistant/components/sinch/* @bendikrb
 homeassistant/components/sisyphus/* @jkeljo
 homeassistant/components/sky_hub/* @rogerselwyn
+homeassistant/components/slack/* @bachya
 homeassistant/components/slide/* @ualex73
 homeassistant/components/sma/* @kellerza
 homeassistant/components/smappee/* @bsmappee
@@ -422,6 +430,7 @@ homeassistant/components/splunk/* @Bre77
 homeassistant/components/spotify/* @frenck
 homeassistant/components/sql/* @dgomes
 homeassistant/components/squeezebox/* @rajlaud
+homeassistant/components/srp_energy/* @briglx
 homeassistant/components/starline/* @anonym-tsk
 homeassistant/components/statistics/* @fabaff
 homeassistant/components/stiebel_eltron/* @fucm
@@ -445,6 +454,7 @@ homeassistant/components/tado/* @michaelarnauts @bdraco
 homeassistant/components/tag/* @balloob @dmulcahey
 homeassistant/components/tahoma/* @philklei
 homeassistant/components/tankerkoenig/* @guillempages
+homeassistant/components/tapsaff/* @bazwilliams
 homeassistant/components/tasmota/* @emontnemery
 homeassistant/components/tautulli/* @ludeeus
 homeassistant/components/tellduslive/* @fredrike
@@ -469,7 +479,7 @@ homeassistant/components/transmission/* @engrbm87 @JPHutchins
 homeassistant/components/tts/* @pvizeli
 homeassistant/components/tuya/* @ollo69
 homeassistant/components/twentemilieu/* @frenck
-homeassistant/components/ubee/* @mzdrale
+homeassistant/components/twinkly/* @dr1rrb
 homeassistant/components/unifi/* @Kane610
 homeassistant/components/unifiled/* @florisvdk
 homeassistant/components/upb/* @gwww
@@ -483,6 +493,7 @@ homeassistant/components/utility_meter/* @dgomes
 homeassistant/components/velbus/* @Cereal2nd @brefra
 homeassistant/components/velux/* @Julius2342
 homeassistant/components/vera/* @vangorra
+homeassistant/components/verisure/* @frenck
 homeassistant/components/versasense/* @flamm3blemuff1n
 homeassistant/components/version/* @fabaff @ludeeus
 homeassistant/components/vesync/* @markperdue @webdjoe @thegardenmonkey
@@ -516,7 +527,6 @@ homeassistant/components/yamaha_musiccast/* @jalmeroth
 homeassistant/components/yandex_transport/* @rishatik92 @devbis
 homeassistant/components/yeelight/* @rytilahti @zewelor @shenxn
 homeassistant/components/yeelightsunflower/* @lindsaymarkward
-homeassistant/components/yessssms/* @flowolf
 homeassistant/components/yi/* @bachya
 homeassistant/components/zeroconf/* @bdraco
 homeassistant/components/zerproc/* @emlove

README.rst

@@ -5,7 +5,7 @@ Open source home automation that puts local control and privacy first. Powered b
 
 Check out `home-assistant.io <https://home-assistant.io>`__ for `a
 demo <https://home-assistant.io/demo/>`__, `installation instructions <https://home-assistant.io/getting-started/>`__,
-`tutorials <https://home-assistant.io/getting-started/automation-2/>`__ and `documentation <https://home-assistant.io/docs/>`__.
+`tutorials <https://home-assistant.io/getting-started/automation/>`__ and `documentation <https://home-assistant.io/docs/>`__.
 
 |screenshot-states|
 
@@ -14,8 +14,8 @@ Featured integrations
 
 |screenshot-components|
 
-The system is built using a modular approach so support for other devices or actions can be implemented easily. See also the `section on architecture <https://developers.home-assistant.io/docs/en/architecture_index.html>`__ and the `section on creating your own
-components <https://developers.home-assistant.io/docs/en/creating_component_index.html>`__.
+The system is built using a modular approach so support for other devices or actions can be implemented easily. See also the `section on architecture <https://developers.home-assistant.io/docs/architecture_index/>`__ and the `section on creating your own
+components <https://developers.home-assistant.io/docs/creating_component_index/>`__.
 
 If you run into issues while using Home Assistant or during development
 of a component, check the `Home Assistant help section <https://home-assistant.io/help/>`__ of our website for further help and information.

build.json

@@ -1,11 +1,11 @@
 {
   "image": "homeassistant/{arch}-homeassistant",
   "build_from": {
-    "aarch64": "homeassistant/aarch64-homeassistant-base:2020.10.1",
-    "armhf": "homeassistant/armhf-homeassistant-base:2020.10.1",
-    "armv7": "homeassistant/armv7-homeassistant-base:2020.10.1",
-    "amd64": "homeassistant/amd64-homeassistant-base:2020.10.1",
-    "i386": "homeassistant/i386-homeassistant-base:2020.10.1"
+    "aarch64": "homeassistant/aarch64-homeassistant-base:2021.01.0",
+    "armhf": "homeassistant/armhf-homeassistant-base:2021.01.0",
+    "armv7": "homeassistant/armv7-homeassistant-base:2021.01.0",
+    "amd64": "homeassistant/amd64-homeassistant-base:2021.01.0",
+    "i386": "homeassistant/i386-homeassistant-base:2021.01.0"
   },
   "labels": {
     "io.hass.type": "core"

docs/source/conf.py

@@ -207,7 +207,6 @@ html_theme_options = {
     "github_repo": PROJECT_GITHUB_REPOSITORY,
     "github_type": "star",
     "github_banner": True,
-    "travis_button": True,
     "touch_icon": "logo-apple.png",
     # 'fixed_sidebar': True, # Re-enable when we have more content
 }

homeassistant/auth/__init__.py

@@ -284,6 +284,7 @@ class AuthManager:
         self,
         user: models.User,
         name: Optional[str] = None,
+        is_active: Optional[bool] = None,
         group_ids: Optional[List[str]] = None,
     ) -> None:
         """Update a user."""
@@ -294,6 +295,12 @@ class AuthManager:
             kwargs["group_ids"] = group_ids
         await self._store.async_update_user(user, **kwargs)
 
+        if is_active is not None:
+            if is_active is True:
+                await self.async_activate_user(user)
+            else:
+                await self.async_deactivate_user(user)
+
     async def async_activate_user(self, user: models.User) -> None:
         """Activate a user."""
         await self._store.async_activate_user(user)

homeassistant/bootstrap.py

@@ -15,11 +15,7 @@ import yarl
 
 from homeassistant import config as conf_util, config_entries, core, loader
 from homeassistant.components import http
-from homeassistant.const import (
-    EVENT_HOMEASSISTANT_STOP,
-    REQUIRED_NEXT_PYTHON_DATE,
-    REQUIRED_NEXT_PYTHON_VER,
-)
+from homeassistant.const import REQUIRED_NEXT_PYTHON_DATE, REQUIRED_NEXT_PYTHON_VER
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers.typing import ConfigType
 from homeassistant.setup import (
@@ -142,11 +138,9 @@ async def async_setup_hass(
         _LOGGER.warning("Detected that frontend did not load. Activating safe mode")
         # Ask integrations to shut down. It's messy but we can't
         # do a clean stop without knowing what is broken
-        hass.async_track_tasks()
-        hass.bus.async_fire(EVENT_HOMEASSISTANT_STOP, {})
         with contextlib.suppress(asyncio.TimeoutError):
             async with hass.timeout.async_timeout(10):
-                await hass.async_block_till_done()
+                await hass.async_stop()
 
         safe_mode = True
         old_config = hass.config
@@ -534,7 +528,7 @@ async def _async_set_up_integrations(
             _LOGGER.warning("Setup timed out for stage 1 - moving forward")
 
     # Enables after dependencies
-    async_set_domains_to_be_loaded(hass, stage_1_domains | stage_2_domains)
+    async_set_domains_to_be_loaded(hass, stage_2_domains)
 
     if stage_2_domains:
         _LOGGER.info("Setting up stage 2: %s", stage_2_domains)

homeassistant/components/abode/__init__.py

@@ -4,12 +4,12 @@ from copy import deepcopy
 from functools import partial
 
 from abodepy import Abode
-from abodepy.exceptions import AbodeException
+from abodepy.exceptions import AbodeAuthenticationException, AbodeException
 import abodepy.helpers.timeline as TIMELINE
 from requests.exceptions import ConnectTimeout, HTTPError
 import voluptuous as vol
 
-from homeassistant.config_entries import SOURCE_IMPORT
+from homeassistant.config_entries import SOURCE_IMPORT, SOURCE_REAUTH
 from homeassistant.const import (
     ATTR_ATTRIBUTION,
     ATTR_DATE,
@@ -110,18 +110,34 @@ async def async_setup_entry(hass, config_entry):
     username = config_entry.data.get(CONF_USERNAME)
     password = config_entry.data.get(CONF_PASSWORD)
     polling = config_entry.data.get(CONF_POLLING)
+    cache = hass.config.path(DEFAULT_CACHEDB)
+
+    # For previous config entries where unique_id is None
+    if config_entry.unique_id is None:
+        hass.config_entries.async_update_entry(
+            config_entry, unique_id=config_entry.data[CONF_USERNAME]
+        )
 
     try:
-        cache = hass.config.path(DEFAULT_CACHEDB)
         abode = await hass.async_add_executor_job(
             Abode, username, password, True, True, True, cache
         )
-        hass.data[DOMAIN] = AbodeSystem(abode, polling)
+
+    except AbodeAuthenticationException as ex:
+        LOGGER.error("Invalid credentials: %s", ex)
+        await hass.config_entries.flow.async_init(
+            DOMAIN,
+            context={"source": SOURCE_REAUTH},
+            data=config_entry.data,
+        )
+        return False
 
     except (AbodeException, ConnectTimeout, HTTPError) as ex:
-        LOGGER.error("Unable to connect to Abode: %s", str(ex))
+        LOGGER.error("Unable to connect to Abode: %s", ex)
         raise ConfigEntryNotReady from ex
 
+    hass.data[DOMAIN] = AbodeSystem(abode, polling)
+
     for platform in ABODE_PLATFORMS:
         hass.async_create_task(
             hass.config_entries.async_forward_entry_setup(config_entry, platform)

homeassistant/components/abode/config_flow.py

@@ -1,15 +1,16 @@
 """Config flow for the Abode Security System component."""
 from abodepy import Abode
-from abodepy.exceptions import AbodeException
+from abodepy.exceptions import AbodeAuthenticationException, AbodeException
+from abodepy.helpers.errors import MFA_CODE_REQUIRED
 from requests.exceptions import ConnectTimeout, HTTPError
 import voluptuous as vol
 
 from homeassistant import config_entries
 from homeassistant.const import CONF_PASSWORD, CONF_USERNAME, HTTP_BAD_REQUEST
-from homeassistant.core import callback
 
 from .const import DEFAULT_CACHEDB, DOMAIN, LOGGER  # pylint: disable=unused-import
 
+CONF_MFA = "mfa_code"
 CONF_POLLING = "polling"
 
 
@@ -25,53 +26,146 @@ class AbodeFlowHandler(config_entries.ConfigFlow, domain=DOMAIN):
             vol.Required(CONF_USERNAME): str,
             vol.Required(CONF_PASSWORD): str,
         }
+        self.mfa_data_schema = {
+            vol.Required(CONF_MFA): str,
+        }
+
+        self._cache = None
+        self._mfa_code = None
+        self._password = None
+        self._polling = False
+        self._username = None
+
+    async def _async_abode_login(self, step_id):
+        """Handle login with Abode."""
+        self._cache = self.hass.config.path(DEFAULT_CACHEDB)
+        errors = {}
+
+        try:
+            await self.hass.async_add_executor_job(
+                Abode, self._username, self._password, True, False, False, self._cache
+            )
+
+        except (AbodeException, ConnectTimeout, HTTPError) as ex:
+            if ex.errcode == MFA_CODE_REQUIRED[0]:
+                return await self.async_step_mfa()
+
+            LOGGER.error("Unable to connect to Abode: %s", ex)
+
+            if ex.errcode == HTTP_BAD_REQUEST:
+                errors = {"base": "invalid_auth"}
+
+            else:
+                errors = {"base": "cannot_connect"}
+
+        if errors:
+            return self.async_show_form(
+                step_id=step_id, data_schema=vol.Schema(self.data_schema), errors=errors
+            )
+
+        return await self._async_create_entry()
+
+    async def _async_abode_mfa_login(self):
+        """Handle multi-factor authentication (MFA) login with Abode."""
+        try:
+            # Create instance to access login method for passing MFA code
+            abode = Abode(
+                auto_login=False,
+                get_devices=False,
+                get_automations=False,
+                cache_path=self._cache,
+            )
+            await self.hass.async_add_executor_job(
+                abode.login, self._username, self._password, self._mfa_code
+            )
+
+        except AbodeAuthenticationException:
+            return self.async_show_form(
+                step_id="mfa",
+                data_schema=vol.Schema(self.mfa_data_schema),
+                errors={"base": "invalid_mfa_code"},
+            )
+
+        return await self._async_create_entry()
+
+    async def _async_create_entry(self):
+        """Create the config entry."""
+        config_data = {
+            CONF_USERNAME: self._username,
+            CONF_PASSWORD: self._password,
+            CONF_POLLING: self._polling,
+        }
+        existing_entry = await self.async_set_unique_id(self._username)
+
+        if existing_entry:
+            self.hass.config_entries.async_update_entry(
+                existing_entry, data=config_data
+            )
+            # Reload the Abode config entry otherwise devices will remain unavailable
+            self.hass.async_create_task(
+                self.hass.config_entries.async_reload(existing_entry.entry_id)
+            )
+
+            return self.async_abort(reason="reauth_successful")
+
+        return self.async_create_entry(title=self._username, data=config_data)
 
     async def async_step_user(self, user_input=None):
         """Handle a flow initialized by the user."""
         if self._async_current_entries():
             return self.async_abort(reason="single_instance_allowed")
 
-        if not user_input:
-            return self._show_form()
-
-        username = user_input[CONF_USERNAME]
-        password = user_input[CONF_PASSWORD]
-        polling = user_input.get(CONF_POLLING, False)
-        cache = self.hass.config.path(DEFAULT_CACHEDB)
-
-        try:
-            await self.hass.async_add_executor_job(
-                Abode, username, password, True, True, True, cache
+        if user_input is None:
+            return self.async_show_form(
+                step_id="user", data_schema=vol.Schema(self.data_schema)
             )
 
-        except (AbodeException, ConnectTimeout, HTTPError) as ex:
-            LOGGER.error("Unable to connect to Abode: %s", str(ex))
-            if ex.errcode == HTTP_BAD_REQUEST:
-                return self._show_form({"base": "invalid_auth"})
-            return self._show_form({"base": "cannot_connect"})
+        self._username = user_input[CONF_USERNAME]
+        self._password = user_input[CONF_PASSWORD]
 
-        return self.async_create_entry(
-            title=user_input[CONF_USERNAME],
-            data={
-                CONF_USERNAME: username,
-                CONF_PASSWORD: password,
-                CONF_POLLING: polling,
-            },
-        )
+        return await self._async_abode_login(step_id="user")
 
-    @callback
-    def _show_form(self, errors=None):
-        """Show the form to the user."""
-        return self.async_show_form(
-            step_id="user",
-            data_schema=vol.Schema(self.data_schema),
-            errors=errors if errors else {},
-        )
+    async def async_step_mfa(self, user_input=None):
+        """Handle a multi-factor authentication (MFA) flow."""
+        if user_input is None:
+            return self.async_show_form(
+                step_id="mfa", data_schema=vol.Schema(self.mfa_data_schema)
+            )
+
+        self._mfa_code = user_input[CONF_MFA]
+
+        return await self._async_abode_mfa_login()
+
+    async def async_step_reauth(self, config):
+        """Handle reauthorization request from Abode."""
+        self._username = config[CONF_USERNAME]
+
+        return await self.async_step_reauth_confirm()
+
+    async def async_step_reauth_confirm(self, user_input=None):
+        """Handle reauthorization flow."""
+        if user_input is None:
+            return self.async_show_form(
+                step_id="reauth_confirm",
+                data_schema=vol.Schema(
+                    {
+                        vol.Required(CONF_USERNAME, default=self._username): str,
+                        vol.Required(CONF_PASSWORD): str,
+                    }
+                ),
+            )
+
+        self._username = user_input[CONF_USERNAME]
+        self._password = user_input[CONF_PASSWORD]
+
+        return await self._async_abode_login(step_id="reauth_confirm")
 
     async def async_step_import(self, import_config):
         """Import a config entry from configuration.yaml."""
         if self._async_current_entries():
-            LOGGER.warning("Only one configuration of abode is allowed.")
+            LOGGER.warning("Already configured. Only a single configuration possible.")
             return self.async_abort(reason="single_instance_allowed")
 
+        self._polling = import_config.get(CONF_POLLING, False)
+
         return await self.async_step_user(import_config)

homeassistant/components/abode/manifest.json

@@ -3,7 +3,7 @@
   "name": "Abode",
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/abode",
-  "requirements": ["abodepy==1.1.0"],
+  "requirements": ["abodepy==1.2.0"],
   "codeowners": ["@shred86"],
   "homekit": {
     "models": ["Abode", "Iota"]

homeassistant/components/abode/strings.json

@@ -7,14 +7,30 @@
           "username": "[%key:common::config_flow::data::email%]",
           "password": "[%key:common::config_flow::data::password%]"
         }
+      },
+      "mfa": {
+        "title": "Enter your MFA code for Abode",
+        "data": {
+          "mfa_code": "MFA code (6-digits)"
+        }
+      },
+      "reauth_confirm": {
+        "title": "Fill in your Abode login information",
+        "data": {
+          "username": "[%key:common::config_flow::data::email%]",
+          "password": "[%key:common::config_flow::data::password%]"
+        }
       }
     },
     "error": {
       "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "invalid_mfa_code": "Invalid MFA code"
+
     },
     "abort": {
-      "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]"
+      "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]",
+      "reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]"
     }
   }
 }

homeassistant/components/abode/translations/ca.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Re-autenticaci\u00f3 realitzada correctament",
             "single_instance_allowed": "Ja configurat. Nom\u00e9s \u00e9s possible una sola configuraci\u00f3."
         },
         "error": {
             "cannot_connect": "Ha fallat la connexi\u00f3",
-            "invalid_auth": "Autenticaci\u00f3 inv\u00e0lida"
+            "invalid_auth": "Autenticaci\u00f3 inv\u00e0lida",
+            "invalid_mfa_code": "Codi MFA inv\u00e0lid"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "Codi MFA (6 d\u00edgits)"
+                },
+                "title": "Introdueix el codi MFA per a Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Contrasenya",
+                    "username": "Correu electr\u00f2nic"
+                },
+                "title": "Introdueix la informaci\u00f3 d'inici de sessi\u00f3 d'Abode."
+            },
             "user": {
                 "data": {
                     "password": "Contrasenya",

homeassistant/components/abode/translations/cs.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Op\u011btovn\u00e9 ov\u011b\u0159en\u00ed bylo \u00fasp\u011b\u0161n\u00e9",
             "single_instance_allowed": "Ji\u017e nastaveno. Je mo\u017en\u00e1 pouze jedin\u00e1 konfigurace."
         },
         "error": {
             "cannot_connect": "Nepoda\u0159ilo se p\u0159ipojit",
-            "invalid_auth": "Neplatn\u00e9 ov\u011b\u0159en\u00ed"
+            "invalid_auth": "Neplatn\u00e9 ov\u011b\u0159en\u00ed",
+            "invalid_mfa_code": "Neplatn\u00fd k\u00f3d MFA"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "K\u00f3d MFA (6 \u010d\u00edslic)"
+                },
+                "title": "Zadejte k\u00f3d MFA pro Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Heslo",
+                    "username": "E-mail"
+                },
+                "title": "Vypl\u0148te sv\u00e9 p\u0159ihla\u0161ovac\u00ed \u00fadaje do Abode"
+            },
             "user": {
                 "data": {
                     "password": "Heslo",

homeassistant/components/abode/translations/de.json

@@ -1,9 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Die erneute Authentifizierung war erfolgreich",
             "single_instance_allowed": "Es ist nur eine einzige Konfiguration von Abode erlaubt."
         },
+        "error": {
+            "cannot_connect": "Verbindung fehlgeschlagen",
+            "invalid_auth": "Ung\u00fcltige Authentifizierung",
+            "invalid_mfa_code": "Ung\u00fcltiger MFA-Code"
+        },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA-Code (6-stellig)"
+                },
+                "title": "Gib deinen MFA-Code f\u00fcr Abode ein"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Passwort",
+                    "username": "E-Mail"
+                },
+                "title": "Gib deine Abode-Anmeldeinformationen ein"
+            },
             "user": {
                 "data": {
                     "password": "Passwort",

homeassistant/components/abode/translations/en.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Re-authentication was successful",
             "single_instance_allowed": "Already configured. Only a single configuration possible."
         },
         "error": {
             "cannot_connect": "Failed to connect",
-            "invalid_auth": "Invalid authentication"
+            "invalid_auth": "Invalid authentication",
+            "invalid_mfa_code": "Invalid MFA code"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA code (6-digits)"
+                },
+                "title": "Enter your MFA code for Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Password",
+                    "username": "Email"
+                },
+                "title": "Fill in your Abode login information"
+            },
             "user": {
                 "data": {
                     "password": "Password",

homeassistant/components/abode/translations/es.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "La reautenticaci\u00f3n fue exitosa",
             "single_instance_allowed": "Ya est\u00e1 configurado. Solo es posible una \u00fanica configuraci\u00f3n."
         },
         "error": {
             "cannot_connect": "No se pudo conectar",
-            "invalid_auth": "Autenticaci\u00f3n no v\u00e1lida"
+            "invalid_auth": "Autenticaci\u00f3n no v\u00e1lida",
+            "invalid_mfa_code": "C\u00f3digo MFA inv\u00e1lido"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "C\u00f3digo MFA (6 d\u00edgitos)"
+                },
+                "title": "Introduce tu c\u00f3digo MFA para Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Contrase\u00f1a",
+                    "username": "Correo electronico"
+                },
+                "title": "Rellene su informaci\u00f3n de inicio de sesi\u00f3n de Abode"
+            },
             "user": {
                 "data": {
                     "password": "Contrase\u00f1a",

homeassistant/components/abode/translations/et.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Taastuvastamine \u00f5nnestus",
             "single_instance_allowed": "Juba seadistatud. V\u00f5imalik on ainult \u00fcks seadistamine."
         },
         "error": {
             "cannot_connect": "\u00dchendamine nurjus",
-            "invalid_auth": "Tuvastamise viga"
+            "invalid_auth": "Tuvastamise viga",
+            "invalid_mfa_code": "Kehtetu MFA-kood"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA kood (6-kohaline)"
+                },
+                "title": "Sisesta oma Abode MFA kood"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Salas\u00f5na",
+                    "username": "E-post"
+                },
+                "title": "Sisesta oma Abode sisselogimisteave"
+            },
             "user": {
                 "data": {
                     "password": "Salas\u00f5na",

homeassistant/components/abode/translations/hu.json

@@ -3,7 +3,16 @@
         "abort": {
             "single_instance_allowed": "Csak egyetlen Abode konfigur\u00e1ci\u00f3 enged\u00e9lyezett."
         },
+        "error": {
+            "cannot_connect": "Sikertelen csatlakoz\u00e1s",
+            "invalid_mfa_code": "\u00c9rv\u00e9nytelen MFA k\u00f3d"
+        },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA k\u00f3d (6 jegy\u0171)"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Jelsz\u00f3",

homeassistant/components/abode/translations/it.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "La riautenticazione ha avuto successo",
             "single_instance_allowed": "Gi\u00e0 configurato. \u00c8 possibile una sola configurazione."
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",
-            "invalid_auth": "Autenticazione non valida"
+            "invalid_auth": "Autenticazione non valida",
+            "invalid_mfa_code": "Codice MFA non valido"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "Codice MFA (6 cifre)"
+                },
+                "title": "Inserisci il tuo codice MFA per Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Password",
+                    "username": "E-mail"
+                },
+                "title": "Inserisci le tue informazioni di accesso Abode"
+            },
             "user": {
                 "data": {
                     "password": "Password",

homeassistant/components/abode/translations/lb.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Re-authentifikatioun war erfollegr\u00e4ich",
             "single_instance_allowed": "Scho konfigur\u00e9iert. N\u00ebmmen eng eenzeg Konfiguratioun m\u00e9iglech."
         },
         "error": {
             "cannot_connect": "Feeler beim verbannen",
-            "invalid_auth": "Ong\u00eblteg Authentifikatioun"
+            "invalid_auth": "Ong\u00eblteg Authentifikatioun",
+            "invalid_mfa_code": "Ong\u00ebltege MFA Code"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA code (6 Zifferen)"
+                },
+                "title": "G\u00ebff dain MFA code fir Abode un"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Passwuert",
+                    "username": "E-Mail"
+                },
+                "title": "F\u00ebll deng Abode Login Informatiounen aus"
+            },
             "user": {
                 "data": {
                     "password": "Passwuert",

homeassistant/components/abode/translations/nl.json

@@ -5,9 +5,18 @@
         },
         "error": {
             "cannot_connect": "Kan geen verbinding maken",
-            "invalid_auth": "Ongeldige authenticatie"
+            "invalid_auth": "Ongeldige authenticatie",
+            "invalid_mfa_code": "Ongeldige MFA-code"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA-code (6-cijfers)"
+                }
+            },
+            "reauth_confirm": {
+                "title": "Vul uw Abode-inloggegevens in"
+            },
             "user": {
                 "data": {
                     "password": "Wachtwoord",

homeassistant/components/abode/translations/no.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Godkjenning p\u00e5 nytt var vellykket",
             "single_instance_allowed": "Allerede konfigurert. Bare \u00e9n enkelt konfigurasjon er mulig."
         },
         "error": {
             "cannot_connect": "Tilkobling mislyktes",
-            "invalid_auth": "Ugyldig godkjenning"
+            "invalid_auth": "Ugyldig godkjenning",
+            "invalid_mfa_code": "Ugyldig MFA-kode"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA-kode (6-sifre)"
+                },
+                "title": "Skriv inn din MFA-kode for Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Passord",
+                    "username": "E-post"
+                },
+                "title": "Fyll ut innloggingsinformasjonen for Abode"
+            },
             "user": {
                 "data": {
                     "password": "Passord",

homeassistant/components/abode/translations/pl.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Ponowne uwierzytelnienie powiod\u0142o si\u0119",
             "single_instance_allowed": "Ju\u017c skonfigurowano. Mo\u017cliwa jest tylko jedna konfiguracja."
         },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia",
-            "invalid_auth": "Niepoprawne uwierzytelnienie"
+            "invalid_auth": "Niepoprawne uwierzytelnienie",
+            "invalid_mfa_code": "Nieprawid\u0142owy kod uwierzytelniania wielosk\u0142adnikowego"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "6-cyfrowy kod uwierzytelniania wielosk\u0142adnikowego"
+                },
+                "title": "Wprowad\u017a kod uwierzytelniania wielosk\u0142adnikowego dla Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Has\u0142o",
+                    "username": "Adres e-mail"
+                },
+                "title": "Wprowad\u017a informacje logowania Abode"
+            },
             "user": {
                 "data": {
                     "password": "Has\u0142o",

homeassistant/components/abode/translations/pt.json

@@ -1,6 +1,20 @@
 {
     "config": {
+        "abort": {
+            "reauth_successful": "Reautentica\u00e7\u00e3o bem sucedida",
+            "single_instance_allowed": "J\u00e1 configurado. Apenas uma \u00fanica configura\u00e7\u00e3o \u00e9 poss\u00edvel."
+        },
+        "error": {
+            "cannot_connect": "Falha na liga\u00e7\u00e3o",
+            "invalid_auth": "Autentica\u00e7\u00e3o inv\u00e1lida"
+        },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Palavra-passe",
+                    "username": "Email"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Palavra-passe",

homeassistant/components/abode/translations/ru.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430 \u0443\u0441\u043f\u0435\u0448\u043d\u043e.",
             "single_instance_allowed": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u0443\u0436\u0435 \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430. \u0412\u043e\u0437\u043c\u043e\u0436\u043d\u043e \u0434\u043e\u0431\u0430\u0432\u0438\u0442\u044c \u0442\u043e\u043b\u044c\u043a\u043e \u043e\u0434\u043d\u0443 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044e."
         },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f.",
-            "invalid_auth": "\u041d\u0435\u0432\u0435\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f."
+            "invalid_auth": "\u041d\u0435\u0432\u0435\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f.",
+            "invalid_mfa_code": "\u041d\u0435\u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0442\u0435\u043b\u044c\u043d\u044b\u0439 \u043a\u043e\u0434 MFA."
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "\u041a\u043e\u0434 MFA (6 \u0446\u0438\u0444\u0440)"
+                },
+                "title": "\u0412\u0432\u0435\u0434\u0438\u0442\u0435 \u043a\u043e\u0434 MFA \u0434\u043b\u044f Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "\u041f\u0430\u0440\u043e\u043b\u044c",
+                    "username": "\u0410\u0434\u0440\u0435\u0441 \u044d\u043b\u0435\u043a\u0442\u0440\u043e\u043d\u043d\u043e\u0439 \u043f\u043e\u0447\u0442\u044b"
+                },
+                "title": "Abode"
+            },
             "user": {
                 "data": {
                     "password": "\u041f\u0430\u0440\u043e\u043b\u044c",

homeassistant/components/abode/translations/sl.json

@@ -1,9 +1,26 @@
 {
     "config": {
         "abort": {
+            "reauth_successful": "Ponovno overjanje je uspelo",
             "single_instance_allowed": "Dovoljena je samo ena konfiguracija Abode."
         },
+        "error": {
+            "invalid_mfa_code": "Napa\u010dna MFA koda"
+        },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "MFA koda (6 \u0161tevilk)"
+                },
+                "title": "Vnesite MFA kodo za Abode"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Geslo",
+                    "username": "E-po\u0161tni naslov"
+                },
+                "title": "Vnesite podatke za prijavo v Abode"
+            },
             "user": {
                 "data": {
                     "password": "Geslo",

homeassistant/components/abode/translations/th.json

@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "mfa": {
+                "title": "\u0e1b\u0e49\u0e2d\u0e19\u0e23\u0e2b\u0e31\u0e2a MFA \u0e08\u0e32\u0e01 Abode"
+            }
+        }
+    }
+}

homeassistant/components/abode/translations/zh-Hant.json

@@ -1,13 +1,28 @@
 {
     "config": {
         "abort": {
-            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u8a2d\u5099\u3002"
+            "reauth_successful": "\u91cd\u65b0\u8a8d\u8b49\u6210\u529f",
+            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u88dd\u7f6e\u3002"
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
-            "invalid_auth": "\u9a57\u8b49\u78bc\u7121\u6548"
+            "invalid_auth": "\u9a57\u8b49\u78bc\u7121\u6548",
+            "invalid_mfa_code": "\u591a\u6b65\u9a5f\u8a8d\u8b49\u78bc\u7121\u6548"
         },
         "step": {
+            "mfa": {
+                "data": {
+                    "mfa_code": "\u591a\u6b65\u9a5f\u8a8d\u8b49\u78bc\uff086 \u4f4d\uff09"
+                },
+                "title": "\u8f38\u5165 Abode \u591a\u6b65\u9a5f\u8a8d\u8b49\u78bc"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "\u5bc6\u78bc",
+                    "username": "\u96fb\u5b50\u90f5\u4ef6"
+                },
+                "title": "\u586b\u5beb Abode \u767b\u5165\u8cc7\u8a0a"
+            },
             "user": {
                 "data": {
                     "password": "\u5bc6\u78bc",

homeassistant/components/accuweather/const.py

@@ -1,4 +1,20 @@
 """Constants for AccuWeather integration."""
+from homeassistant.components.weather import (
+    ATTR_CONDITION_CLEAR_NIGHT,
+    ATTR_CONDITION_CLOUDY,
+    ATTR_CONDITION_EXCEPTIONAL,
+    ATTR_CONDITION_FOG,
+    ATTR_CONDITION_HAIL,
+    ATTR_CONDITION_LIGHTNING,
+    ATTR_CONDITION_LIGHTNING_RAINY,
+    ATTR_CONDITION_PARTLYCLOUDY,
+    ATTR_CONDITION_POURING,
+    ATTR_CONDITION_RAINY,
+    ATTR_CONDITION_SNOWY,
+    ATTR_CONDITION_SNOWY_RAINY,
+    ATTR_CONDITION_SUNNY,
+    ATTR_CONDITION_WINDY,
+)
 from homeassistant.const import (
     ATTR_DEVICE_CLASS,
     CONCENTRATION_PARTS_PER_CUBIC_METER,
@@ -29,20 +45,20 @@ NAME = "AccuWeather"
 UNDO_UPDATE_LISTENER = "undo_update_listener"
 
 CONDITION_CLASSES = {
-    "clear-night": [33, 34, 37],
-    "cloudy": [7, 8, 38],
-    "exceptional": [24, 30, 31],
-    "fog": [11],
-    "hail": [25],
-    "lightning": [15],
-    "lightning-rainy": [16, 17, 41, 42],
-    "partlycloudy": [4, 6, 35, 36],
-    "pouring": [18],
-    "rainy": [12, 13, 14, 26, 39, 40],
-    "snowy": [19, 20, 21, 22, 23, 43, 44],
-    "snowy-rainy": [29],
-    "sunny": [1, 2, 3, 5],
-    "windy": [32],
+    ATTR_CONDITION_CLEAR_NIGHT: [33, 34, 37],
+    ATTR_CONDITION_CLOUDY: [7, 8, 38],
+    ATTR_CONDITION_EXCEPTIONAL: [24, 30, 31],
+    ATTR_CONDITION_FOG: [11],
+    ATTR_CONDITION_HAIL: [25],
+    ATTR_CONDITION_LIGHTNING: [15],
+    ATTR_CONDITION_LIGHTNING_RAINY: [16, 17, 41, 42],
+    ATTR_CONDITION_PARTLYCLOUDY: [4, 6, 35, 36],
+    ATTR_CONDITION_POURING: [18],
+    ATTR_CONDITION_RAINY: [12, 13, 14, 26, 39, 40],
+    ATTR_CONDITION_SNOWY: [19, 20, 21, 22, 23, 43, 44],
+    ATTR_CONDITION_SNOWY_RAINY: [29],
+    ATTR_CONDITION_SUNNY: [1, 2, 3, 5],
+    ATTR_CONDITION_WINDY: [32],
 }
 
 FORECAST_DAYS = [0, 1, 2, 3, 4]
@@ -167,6 +183,20 @@ FORECAST_SENSOR_TYPES = {
         ATTR_UNIT_METRIC: SPEED_KILOMETERS_PER_HOUR,
         ATTR_UNIT_IMPERIAL: SPEED_MILES_PER_HOUR,
     },
+    "WindDay": {
+        ATTR_DEVICE_CLASS: None,
+        ATTR_ICON: "mdi:weather-windy",
+        ATTR_LABEL: "Wind Day",
+        ATTR_UNIT_METRIC: SPEED_KILOMETERS_PER_HOUR,
+        ATTR_UNIT_IMPERIAL: SPEED_MILES_PER_HOUR,
+    },
+    "WindNight": {
+        ATTR_DEVICE_CLASS: None,
+        ATTR_ICON: "mdi:weather-windy",
+        ATTR_LABEL: "Wind Night",
+        ATTR_UNIT_METRIC: SPEED_KILOMETERS_PER_HOUR,
+        ATTR_UNIT_IMPERIAL: SPEED_MILES_PER_HOUR,
+    },
 }
 
 OPTIONAL_SENSORS = (
@@ -268,6 +298,13 @@ SENSOR_TYPES = {
         ATTR_UNIT_METRIC: TEMP_CELSIUS,
         ATTR_UNIT_IMPERIAL: TEMP_FAHRENHEIT,
     },
+    "Wind": {
+        ATTR_DEVICE_CLASS: None,
+        ATTR_ICON: "mdi:weather-windy",
+        ATTR_LABEL: "Wind",
+        ATTR_UNIT_METRIC: SPEED_KILOMETERS_PER_HOUR,
+        ATTR_UNIT_IMPERIAL: SPEED_MILES_PER_HOUR,
+    },
     "WindGust": {
         ATTR_DEVICE_CLASS: None,
         ATTR_ICON: "mdi:weather-windy",

homeassistant/components/accuweather/sensor.py

@@ -96,7 +96,7 @@ class AccuWeatherSensor(CoordinatorEntity):
                 return self.coordinator.data[ATTR_FORECAST][self.forecast_day][
                     self.kind
                 ]["Value"]
-            if self.kind in ["WindGustDay", "WindGustNight"]:
+            if self.kind in ["WindDay", "WindNight", "WindGustDay", "WindGustNight"]:
                 return self.coordinator.data[ATTR_FORECAST][self.forecast_day][
                     self.kind
                 ]["Speed"]["Value"]
@@ -115,7 +115,7 @@ class AccuWeatherSensor(CoordinatorEntity):
             return self.coordinator.data["PrecipitationSummary"][self.kind][
                 self._unit_system
             ]["Value"]
-        if self.kind == "WindGust":
+        if self.kind in ["Wind", "WindGust"]:
             return self.coordinator.data[self.kind]["Speed"][self._unit_system]["Value"]
         return self.coordinator.data[self.kind]
 
@@ -144,7 +144,7 @@ class AccuWeatherSensor(CoordinatorEntity):
     def device_state_attributes(self):
         """Return the state attributes."""
         if self.forecast_day is not None:
-            if self.kind in ["WindGustDay", "WindGustNight"]:
+            if self.kind in ["WindDay", "WindNight", "WindGustDay", "WindGustNight"]:
                 self._attrs["direction"] = self.coordinator.data[ATTR_FORECAST][
                     self.forecast_day
                 ][self.kind]["Direction"]["English"]

homeassistant/components/accuweather/strings.json

@@ -31,5 +31,11 @@
         }
       }
     }
+  },
+  "system_health": {
+    "info": {
+      "can_reach_server": "Reach AccuWeather server",
+      "remaining_requests": "Remaining allowed requests"
+    }
   }
 }

homeassistant/components/accuweather/system_health.py

@@ -0,0 +1,27 @@
+"""Provide info to system health."""
+from accuweather.const import ENDPOINT
+
+from homeassistant.components import system_health
+from homeassistant.core import HomeAssistant, callback
+
+from .const import COORDINATOR, DOMAIN
+
+
+@callback
+def async_register(
+    hass: HomeAssistant, register: system_health.SystemHealthRegistration
+) -> None:
+    """Register system health callbacks."""
+    register.async_register_info(system_health_info)
+
+
+async def system_health_info(hass):
+    """Get info for the info page."""
+    remaining_requests = list(hass.data[DOMAIN].values())[0][
+        COORDINATOR
+    ].accuweather.requests_remaining
+
+    return {
+        "can_reach_server": system_health.async_check_can_reach_url(hass, ENDPOINT),
+        "remaining_requests": remaining_requests,
+    }

homeassistant/components/accuweather/translations/ca.json

@@ -31,5 +31,11 @@
                 "title": "Opcions d'AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Servidor d'Accuweather accessible",
+            "remaining_requests": "Sol\u00b7licituds permeses restants"
+        }
     }
 }

homeassistant/components/accuweather/translations/cs.json

@@ -31,5 +31,11 @@
                 "title": "Mo\u017enosti AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Lze kontaktovat AccuWeather server",
+            "remaining_requests": "Zb\u00fdvaj\u00edc\u00ed povolen\u00e9 \u017e\u00e1dosti"
+        }
     }
 }

homeassistant/components/accuweather/translations/de.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "error": {
+            "cannot_connect": "Verbindungsfehler"
+        },
         "step": {
             "user": {
                 "data": {
@@ -10,5 +13,20 @@
                 "title": "AccuWeather"
             }
         }
+    },
+    "options": {
+        "step": {
+            "user": {
+                "data": {
+                    "forecast": "Wettervorhersage"
+                }
+            }
+        }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "AccuWeather Server erreichen",
+            "remaining_requests": "Verbleibende erlaubte Anfragen"
+        }
     }
 }

homeassistant/components/accuweather/translations/en.json

@@ -31,5 +31,11 @@
                 "title": "AccuWeather Options"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Reach AccuWeather server",
+            "remaining_requests": "Remaining allowed requests"
+        }
     }
 }

homeassistant/components/accuweather/translations/es-419.json

@@ -0,0 +1,23 @@
+{
+    "config": {
+        "error": {
+            "requests_exceeded": "Se super\u00f3 el n\u00famero permitido de solicitudes a la API de Accuweather. Tiene que esperar o cambiar la clave de API."
+        },
+        "step": {
+            "user": {
+                "description": "Si necesita ayuda con la configuraci\u00f3n, eche un vistazo aqu\u00ed: https://www.home-assistant.io/integrations/accuweather/ \n\nAlgunos sensores no est\u00e1n habilitados de forma predeterminada. Puede habilitarlos en el registro de entidades despu\u00e9s de la configuraci\u00f3n de integraci\u00f3n. La previsi\u00f3n meteorol\u00f3gica no est\u00e1 habilitada de forma predeterminada. Puede habilitarlo en las opciones de integraci\u00f3n.",
+                "title": "AccuWeather"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "user": {
+                "data": {
+                    "forecast": "Pron\u00f3stico del tiempo"
+                },
+                "description": "Debido a las limitaciones de la versi\u00f3n gratuita de la clave API de AccuWeather, cuando habilita el pron\u00f3stico del tiempo, las actualizaciones de datos se realizar\u00e1n cada 64 minutos en lugar de cada 32 minutos."
+            }
+        }
+    }
+}

homeassistant/components/accuweather/translations/es.json

@@ -31,5 +31,11 @@
                 "title": "Opciones de AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Alcanzar el servidor AccuWeather",
+            "remaining_requests": "Solicitudes permitidas restantes"
+        }
     }
 }

homeassistant/components/accuweather/translations/et.json

@@ -31,5 +31,11 @@
                 "title": "AccuWeatheri valikud"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u00dchendus Accuweatheri serveriga",
+            "remaining_requests": "Lubatud taotlusi on j\u00e4\u00e4nud"
+        }
     }
 }

homeassistant/components/accuweather/translations/fr.json

@@ -31,5 +31,10 @@
                 "title": "Options AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Acc\u00e8s au serveur AccuWeather"
+        }
     }
 }

homeassistant/components/accuweather/translations/it.json

@@ -31,5 +31,11 @@
                 "title": "Opzioni AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Raggiungi il server AccuWeather",
+            "remaining_requests": "Richieste consentite rimanenti"
+        }
     }
 }

homeassistant/components/accuweather/translations/lb.json

@@ -31,5 +31,11 @@
                 "title": "AccuWeather Optiounen"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "AccuWeather Server ereechbar",
+            "remaining_requests": "Rescht vun erlaabten Ufroen"
+        }
     }
 }

homeassistant/components/accuweather/translations/no.json

@@ -31,5 +31,11 @@
                 "title": "AccuWeather-alternativer"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "N\u00e5 AccuWeather-serveren",
+            "remaining_requests": "Gjenv\u00e6rende tillatte foresp\u00f8rsler"
+        }
     }
 }

homeassistant/components/accuweather/translations/pl.json

@@ -31,5 +31,11 @@
                 "title": "Opcje AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Dost\u0119p do serwera AccuWeather",
+            "remaining_requests": "Pozosta\u0142o dozwolonych \u017c\u0105da\u0144"
+        }
     }
 }

homeassistant/components/accuweather/translations/pt.json

@@ -10,9 +10,10 @@
         "step": {
             "user": {
                 "data": {
-                    "api_key": "Chave de API",
+                    "api_key": "API Key",
                     "latitude": "Latitude",
-                    "longitude": "Longitude"
+                    "longitude": "Longitude",
+                    "name": "Nome"
                 }
             }
         }

homeassistant/components/accuweather/translations/ru.json

@@ -31,5 +31,11 @@
                 "title": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438 AccuWeather"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u0414\u043e\u0441\u0442\u0443\u043f \u043a \u0441\u0435\u0440\u0432\u0435\u0440\u0443 AccuWeather",
+            "remaining_requests": "\u0421\u0447\u0451\u0442\u0447\u0438\u043a \u043e\u0441\u0442\u0430\u0432\u0448\u0438\u0445\u0441\u044f \u0437\u0430\u043f\u0440\u043e\u0441\u043e\u0432"
+        }
     }
 }

homeassistant/components/accuweather/translations/sensor.de.json

@@ -0,0 +1,9 @@
+{
+    "state": {
+        "accuweather__pressure_tendency": {
+            "falling": "Fallend",
+            "rising": "Steigend",
+            "steady": "Gleichbleibend"
+        }
+    }
+}

homeassistant/components/accuweather/translations/sl.json

@@ -0,0 +1,8 @@
+{
+    "system_health": {
+        "info": {
+            "can_reach_server": "Dostop do AccuWeather stre\u017enika",
+            "remaining_requests": "Preostalo dovoljenih zahtevkov"
+        }
+    }
+}

homeassistant/components/accuweather/translations/zh-Hans.json

@@ -0,0 +1,8 @@
+{
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u53ef\u8bbf\u95ee AccuWeather \u670d\u52a1\u5668",
+            "remaining_requests": "\u5176\u4f59\u5141\u8bb8\u7684\u8bf7\u6c42"
+        }
+    }
+}

homeassistant/components/accuweather/translations/zh-Hant.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u8a2d\u5099\u3002"
+            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u88dd\u7f6e\u3002"
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
@@ -31,5 +31,11 @@
                 "title": "AccuWeather \u9078\u9805"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u9023\u7dda AccuWeather \u4f3a\u670d\u5668",
+            "remaining_requests": "\u5176\u9918\u5141\u8a31\u7684\u8acb\u6c42"
+        }
     }
 }

homeassistant/components/acer_projector/manifest.json

@@ -2,6 +2,6 @@
   "domain": "acer_projector",
   "name": "Acer Projector",
   "documentation": "https://www.home-assistant.io/integrations/acer_projector",
-  "requirements": ["pyserial==3.4"],
+  "requirements": ["pyserial==3.5"],
   "codeowners": []
 }

homeassistant/components/acmeda/manifest.json

@@ -3,7 +3,7 @@
   "name": "Rollease Acmeda Automate",
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/acmeda",
-  "requirements": ["aiopulse==0.4.0"],
+  "requirements": ["aiopulse==0.4.2"],
   "codeowners": [
     "@atmurray"
   ]

homeassistant/components/acmeda/translations/no.json

@@ -6,7 +6,7 @@
         "step": {
             "user": {
                 "data": {
-                    "id": "Verts-ID"
+                    "id": "Vert ID"
                 },
                 "title": "Velg en hub du vil legge til"
             }

homeassistant/components/acmeda/translations/pt.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "no_devices_found": "Nenhum dispositivo encontrado na rede"
+        }
+    }
+}

homeassistant/components/acmeda/translations/zh-Hant.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "no_devices_found": "\u7db2\u8def\u4e0a\u627e\u4e0d\u5230\u8a2d\u5099"
+            "no_devices_found": "\u7db2\u8def\u4e0a\u627e\u4e0d\u5230\u88dd\u7f6e"
         },
         "step": {
             "user": {

homeassistant/components/adguard/translations/de.json

@@ -4,6 +4,9 @@
             "existing_instance_updated": "Bestehende Konfiguration wurde aktualisiert.",
             "single_instance_allowed": "Es ist nur eine einzige Konfiguration von AdGuard Home zul\u00e4ssig."
         },
+        "error": {
+            "cannot_connect": "Verbindungsfehler"
+        },
         "step": {
             "hassio_confirm": {
                 "description": "M\u00f6chtest du Home Assistant so konfigurieren, dass eine Verbindung mit AdGuard Home als Hass.io-Add-On hergestellt wird: {addon}?",

homeassistant/components/adguard/translations/hu.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "error": {
+            "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/adguard/translations/pl.json

@@ -9,7 +9,7 @@
         },
         "step": {
             "hassio_confirm": {
-                "description": "Czy chcesz skonfigurowa\u0107 Home Assistant, aby po\u0142\u0105czy\u0142 si\u0119 z AdGuard Home przez dodatek Hass.io {addon}?",
+                "description": "Czy chcesz skonfigurowa\u0107 Home Assistanta, aby po\u0142\u0105czy\u0142 si\u0119 z AdGuard Home przez dodatek Hass.io {addon}?",
                 "title": "AdGuard Home przez dodatek Hass.io"
             },
             "user": {

homeassistant/components/adguard/translations/pt.json

@@ -1,5 +1,11 @@
 {
     "config": {
+        "abort": {
+            "single_instance_allowed": "J\u00e1 configurado. Apenas uma \u00fanica configura\u00e7\u00e3o \u00e9 poss\u00edvel."
+        },
+        "error": {
+            "cannot_connect": "Falha na liga\u00e7\u00e3o"
+        },
         "step": {
             "hassio_confirm": {
                 "title": "AdGuard Home via Hass.io add-on"
@@ -9,7 +15,9 @@
                     "host": "Servidor",
                     "password": "Palavra-passe",
                     "port": "Porta",
-                    "username": "Nome de Utilizador"
+                    "ssl": "Utiliza um certificado SSL",
+                    "username": "Nome de Utilizador",
+                    "verify_ssl": "Verificar certificado SSL"
                 }
             }
         }

homeassistant/components/adguard/translations/zh-Hant.json

@@ -2,7 +2,7 @@
     "config": {
         "abort": {
             "existing_instance_updated": "\u5df2\u66f4\u65b0\u73fe\u6709\u8a2d\u5b9a\u3002",
-            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u8a2d\u5099\u3002"
+            "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u88dd\u7f6e\u3002"
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557"

homeassistant/components/advantage_air/const.py

@@ -1,6 +1,6 @@
 """Constants used by Advantage Air integration."""
 DOMAIN = "advantage_air"
-ADVANTAGE_AIR_RETRY = 5
+ADVANTAGE_AIR_RETRY = 10
 ADVANTAGE_AIR_STATE_OPEN = "open"
 ADVANTAGE_AIR_STATE_CLOSE = "close"
 ADVANTAGE_AIR_STATE_ON = "on"

homeassistant/components/advantage_air/translations/de.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "error": {
+            "cannot_connect": "Verbindungsfehler"
+        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/advantage_air/translations/es-419.json

@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "title": "Conectar"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/hu.json

@@ -0,0 +1,17 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "IP c\u00edm",
+                    "port": "Port"
+                },
+                "description": "Csatlakozzon az Advantage Air fali t\u00e1blag\u00e9p API-j\u00e1hoz.",
+                "title": "Csatlakoz\u00e1s"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/ka.json

@@ -0,0 +1,17 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u10db\u10d0\u10e0\u10ea\u10ee\u10d8 \u10e8\u10d4\u10d4\u10e0\u10d7\u10d4\u10d1\u10d8\u10e1\u10d0\u10e1"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "IP \u10db\u10d8\u10e1\u10d0\u10db\u10d0\u10e0\u10d7\u10d8",
+                    "port": "\u10de\u10dd\u10e0\u10e2\u10d8"
+                },
+                "description": "\u10d3\u10d0\u10e3\u10d9\u10d0\u10d5\u10e8\u10d8\u10e0\u10d3\u10d8\u10d7 \u10d7\u10e5\u10d5\u10d4\u10dc\u10d8 Advantage Air  API-\u10e1 \u10d9\u10d4\u10d3\u10d4\u10da\u10d6\u10d4 \u10d3\u10d0\u10db\u10dd\u10dc\u10e2\u10d0\u10df\u10d4\u10d1\u10e3\u10da\u10d8 \u10e2\u10d0\u10d1\u10da\u10d4\u10e2\u10d8\u10d7",
+                "title": "\u10d3\u10d0\u10d9\u10d0\u10d5\u10e8\u10d8\u10e0\u10d4\u10d1\u10d0"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/pt.json

@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "O dispositivo j\u00e1 est\u00e1 configurado"
+        },
+        "error": {
+            "cannot_connect": "Falha na liga\u00e7\u00e3o"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Endere\u00e7o IP",
+                    "port": "Porta"
+                },
+                "title": "Ligar"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/sl.json

@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "title": "Pove\u017eite se"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/zh-Hant.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "already_configured": "\u8a2d\u5099\u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210"
+            "already_configured": "\u88dd\u7f6e\u7d93\u8a2d\u5b9a\u5b8c\u6210"
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557"

homeassistant/components/aftership/sensor.py

@@ -181,8 +181,8 @@ class AfterShipSensor(Entity):
                 track["tracking_number"] if track["title"] is None else track["title"]
             )
             last_checkpoint = (
-                "Shipment pending"
-                if track["tag"] == "Pending"
+                f"Shipment {track['tag'].lower()}"
+                if not track["checkpoints"]
                 else track["checkpoints"][-1]
             )
             status_counts[status] = status_counts.get(status, 0) + 1

homeassistant/components/agent_dvr/translations/de.json

@@ -4,7 +4,8 @@
             "already_configured": "Ger\u00e4t ist bereits konfiguriert"
         },
         "error": {
-            "already_in_progress": "Der Konfigurationsfluss f\u00fcr das Ger\u00e4t wird bereits ausgef\u00fchrt."
+            "already_in_progress": "Der Konfigurationsfluss f\u00fcr das Ger\u00e4t wird bereits ausgef\u00fchrt.",
+            "cannot_connect": "Verbindungsfehler"
         },
         "step": {
             "user": {

homeassistant/components/agent_dvr/translations/hu.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "error": {
+            "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/agent_dvr/translations/ka.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u10db\u10d0\u10e0\u10ea\u10ee\u10d8 \u10e8\u10d4\u10d4\u10e0\u10d7\u10d4\u10d1\u10d8\u10e1\u10d0\u10e1"
+        }
+    }
+}

homeassistant/components/agent_dvr/translations/pt.json

@@ -1,9 +1,17 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "O dispositivo j\u00e1 est\u00e1 configurado"
+        },
+        "error": {
+            "already_in_progress": "O processo de configura\u00e7\u00e3o j\u00e1 est\u00e1 a decorrer",
+            "cannot_connect": "Falha na liga\u00e7\u00e3o"
+        },
         "step": {
             "user": {
                 "data": {
-                    "host": "Servidor"
+                    "host": "Servidor",
+                    "port": "Porta"
                 }
             }
         }

homeassistant/components/agent_dvr/translations/zh-Hant.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "already_configured": "\u8a2d\u5099\u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210"
+            "already_configured": "\u88dd\u7f6e\u7d93\u8a2d\u5b9a\u5b8c\u6210"
         },
         "error": {
             "already_in_progress": "\u8a2d\u5b9a\u5df2\u7d93\u9032\u884c\u4e2d",

homeassistant/components/airly/config_flow.py

@@ -5,15 +5,17 @@ import async_timeout
 import voluptuous as vol
 
 from homeassistant import config_entries
-from homeassistant.const import CONF_API_KEY, CONF_LATITUDE, CONF_LONGITUDE, CONF_NAME
+from homeassistant.const import (
+    CONF_API_KEY,
+    CONF_LATITUDE,
+    CONF_LONGITUDE,
+    CONF_NAME,
+    HTTP_UNAUTHORIZED,
+)
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 import homeassistant.helpers.config_validation as cv
 
-from .const import (  # pylint:disable=unused-import
-    DEFAULT_NAME,
-    DOMAIN,
-    NO_AIRLY_SENSORS,
-)
+from .const import DOMAIN, NO_AIRLY_SENSORS  # pylint:disable=unused-import
 
 
 class AirlyFlowHandler(config_entries.ConfigFlow, domain=DOMAIN):
@@ -22,13 +24,9 @@ class AirlyFlowHandler(config_entries.ConfigFlow, domain=DOMAIN):
     VERSION = 1
     CONNECTION_CLASS = config_entries.CONN_CLASS_CLOUD_POLL
 
-    def __init__(self):
-        """Initialize."""
-        self._errors = {}
-
     async def async_step_user(self, user_input=None):
         """Handle a flow initialized by the user."""
-        self._errors = {}
+        errors = {}
 
         websession = async_get_clientsession(self.hass)
 
@@ -37,75 +35,57 @@ class AirlyFlowHandler(config_entries.ConfigFlow, domain=DOMAIN):
                 f"{user_input[CONF_LATITUDE]}-{user_input[CONF_LONGITUDE]}"
             )
             self._abort_if_unique_id_configured()
-            api_key_valid = await self._test_api_key(websession, user_input["api_key"])
-            if not api_key_valid:
-                self._errors["base"] = "invalid_api_key"
-            else:
-                location_valid = await self._test_location(
+            try:
+                location_valid = await test_location(
                     websession,
                     user_input["api_key"],
                     user_input["latitude"],
                     user_input["longitude"],
                 )
+            except AirlyError as err:
+                if err.status_code == HTTP_UNAUTHORIZED:
+                    errors["base"] = "invalid_api_key"
+            else:
                 if not location_valid:
-                    self._errors["base"] = "wrong_location"
+                    errors["base"] = "wrong_location"
 
-            if not self._errors:
-                return self.async_create_entry(
-                    title=user_input[CONF_NAME], data=user_input
-                )
+                if not errors:
+                    return self.async_create_entry(
+                        title=user_input[CONF_NAME], data=user_input
+                    )
 
-        return self._show_config_form(
-            name=DEFAULT_NAME,
-            api_key="",
-            latitude=self.hass.config.latitude,
-            longitude=self.hass.config.longitude,
-        )
-
-    def _show_config_form(self, name=None, api_key=None, latitude=None, longitude=None):
-        """Show the configuration form to edit data."""
         return self.async_show_form(
             step_id="user",
             data_schema=vol.Schema(
                 {
-                    vol.Required(CONF_API_KEY, default=api_key): str,
+                    vol.Required(CONF_API_KEY): str,
                     vol.Optional(
                         CONF_LATITUDE, default=self.hass.config.latitude
                     ): cv.latitude,
                     vol.Optional(
                         CONF_LONGITUDE, default=self.hass.config.longitude
                     ): cv.longitude,
-                    vol.Optional(CONF_NAME, default=name): str,
+                    vol.Optional(
+                        CONF_NAME, default=self.hass.config.location_name
+                    ): str,
                 }
             ),
-            errors=self._errors,
+            errors=errors,
         )
 
-    async def _test_api_key(self, client, api_key):
-        """Return true if api_key is valid."""
 
-        with async_timeout.timeout(10):
-            airly = Airly(api_key, client)
-            measurements = airly.create_measurements_session_point(
-                latitude=52.24131, longitude=20.99101
-            )
-            try:
-                await measurements.update()
-            except AirlyError:
-                return False
-            return True
+async def test_location(client, api_key, latitude, longitude):
+    """Return true if location is valid."""
+    airly = Airly(api_key, client)
+    measurements = airly.create_measurements_session_point(
+        latitude=latitude, longitude=longitude
+    )
 
-    async def _test_location(self, client, api_key, latitude, longitude):
-        """Return true if location is valid."""
+    with async_timeout.timeout(10):
+        await measurements.update()
 
-        with async_timeout.timeout(10):
-            airly = Airly(api_key, client)
-            measurements = airly.create_measurements_session_point(
-                latitude=latitude, longitude=longitude
-            )
+    current = measurements.current
 
-            await measurements.update()
-        current = measurements.current
-        if current["indexes"][0]["description"] == NO_AIRLY_SENSORS:
-            return False
-        return True
+    if current["indexes"][0]["description"] == NO_AIRLY_SENSORS:
+        return False
+    return True

homeassistant/components/airly/strings.json

@@ -19,5 +19,10 @@
     "abort": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_location%]"
     }
+  },
+  "system_health": {
+    "info": {
+      "can_reach_server": "Reach Airly server"
+    }
   }
 }

homeassistant/components/airly/system_health.py

@@ -0,0 +1,22 @@
+"""Provide info to system health."""
+from airly import Airly
+
+from homeassistant.components import system_health
+from homeassistant.core import HomeAssistant, callback
+
+
+@callback
+def async_register(
+    hass: HomeAssistant, register: system_health.SystemHealthRegistration
+) -> None:
+    """Register system health callbacks."""
+    register.async_register_info(system_health_info)
+
+
+async def system_health_info(hass):
+    """Get info for the info page."""
+    return {
+        "can_reach_server": system_health.async_check_can_reach_url(
+            hass, Airly.AIRLY_API_URL
+        )
+    }

homeassistant/components/airly/translations/ca.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Servidor d'Airly accessible"
+        }
     }
 }

homeassistant/components/airly/translations/cs.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Lze kontaktovat Airly server"
+        }
     }
 }

homeassistant/components/airly/translations/de.json

@@ -18,5 +18,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Airly Server erreichen"
+        }
     }
 }

homeassistant/components/airly/translations/en.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Reach Airly server"
+        }
     }
 }

homeassistant/components/airly/translations/es.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Alcanzar el servidor Airly"
+        }
     }
 }

homeassistant/components/airly/translations/et.json

@@ -19,5 +19,10 @@
                 "title": ""
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u00dchendus Airly serveriga"
+        }
     }
 }

homeassistant/components/airly/translations/fr.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Acc\u00e8s au serveur Airly"
+        }
     }
 }

homeassistant/components/airly/translations/it.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Raggiungi il server Airly"
+        }
     }
 }

homeassistant/components/airly/translations/lb.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Airly Server ereechbar"
+        }
     }
 }

homeassistant/components/airly/translations/no.json

@@ -19,5 +19,10 @@
                 "title": ""
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "N\u00e5 Airly-serveren"
+        }
     }
 }

homeassistant/components/airly/translations/pl.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Dost\u0119p do serwera Airly"
+        }
     }
 }

homeassistant/components/airly/translations/pt.json

@@ -1,11 +1,18 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "A localiza\u00e7\u00e3o j\u00e1 est\u00e1 configurada"
+        },
+        "error": {
+            "invalid_api_key": "Chave de API inv\u00e1lida"
+        },
         "step": {
             "user": {
                 "data": {
                     "api_key": "",
                     "latitude": "Latitude",
-                    "longitude": "Longitude"
+                    "longitude": "Longitude",
+                    "name": "Nome"
                 },
                 "title": ""
             }

homeassistant/components/airly/translations/ru.json

@@ -19,5 +19,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u0414\u043e\u0441\u0442\u0443\u043f \u043a \u0441\u0435\u0440\u0432\u0435\u0440\u0443 Airly"
+        }
     }
 }

homeassistant/components/airly/translations/sl.json

@@ -18,5 +18,10 @@
                 "title": "Airly"
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "Dostop do Airly stre\u017enika"
+        }
     }
 }

homeassistant/components/airly/translations/tr.json

@@ -0,0 +1,7 @@
+{
+    "system_health": {
+        "info": {
+            "can_reach_server": "Airly sunucusuna eri\u015fin"
+        }
+    }
+}

homeassistant/components/airly/translations/zh-Hans.json

@@ -10,5 +10,10 @@
                 }
             }
         }
+    },
+    "system_health": {
+        "info": {
+            "can_reach_server": "\u53ef\u8bbf\u95ee Airly \u670d\u52a1\u5668"
+        }
     }
 }