* Bugfix windows have a other default loop now
* fix handling with 3.4.2 that not support ensure_future
* make the same as ensure_future does
* fix spell
* fix lazy test
* Added Synology DSM Sensor
* Fixed balloobbot's comments
* Fixed mistake (should have run lint and flake8 before committing
* Fixed update mechanisme according to balloobs feedback
* Requesting retest as test failure isn't related to changes made
* Update the icloud device_tracker
* addressed @kellerza 's comments
* GMTT config needs an entity_id
* renamed services
* fix cookiedir and clean up keep_alive function
* fix travis errors
* forgot a self.
* update devices after initializing the API
* changed wording
* addressed changes from @kellerza
* Syntax error solved
* Update icloud.py
* Only use account of username instead of whole username as default for account name
* use slugify instead of slug for schema
* remove Google Maps Travel Time
* Add comment from original tracker back
* Added support for Philips Tvs with JointSpace API
* Flake + Lint fixes
* Lint be like "lol fu"
* Changes as requested by reviewers, except lib-requirement
* Switched to library-usage
* lint... newline-bingo...
* Fixes in TP-Link Switch logging 0 values on init
On init of component the emeter would log to influxdb and possibly other inputs a 0 value, instead of not logging anything.
Initial polling should circumvent that behavior and avoid logging inconsistencies.
* Refactors update call in __init__
* Add a method to throttle calls to services
This adds CallRateDelayThrottle. This is a class that provides an
decorator to throttle calls to services. Instead of the Throttle in
homeassistant.util it does this by delaying all subsequent calls
instead of just dropping them. Dropping of calls would be bad if we
call services to actual change the state of a connected hardware (like
rf controlled power plugs).
Ihe delay is done by rescheduling the call using
track_point_in_utc_time from homeassistant.helpers.event so it should
not block the mainloop at all.
* Add unittests for CallRateDelayThrottle
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Introduce a send_delay for pilight component
If pilight is used with a "pilight USB Nano" between the daemon and the
hardware, we must use a delay between sending multiple signals.
Otherwise the hardware will just skip random codes. We hit this
condition for example, if we switch a group of pilight switches on or
off. Without the delay, random switch signals will not be transmitted by
the RF transmitter.
As this seems not necessary, if the transmitter is directly connected
via GPIO, we introduce a optional configuration to set the delay.
* Add unittests for pilight send_delay handling
This adds an unittest to test the delayed calls to the send_code
service.
* Initial attempt at implementation
* Adding Garadget cover component
* Updating Device to be Required
* Updating .coveragerc to exclude from testing
* Updating code review items
* Updating per 2nd code review
* Updating configuration to be more like command-line
* Initial submission of LiteJet integration.
* Add LiteJet switch pressed automation trigger. (State changes are too slow to catch a press-release.)
Add LiteJet scene, replacing commented out code that treated these as lights.
Include LiteJet numbers in the device state so that it is easy to lookup entity -> number.
* Fix missing global.
* Allow light's brightness to be set explicitly.
* Support optional 'ignore' key to ignore prefixes of loads, switches, and scenes that weren't configured for use in the LiteJet system.
* Fix lint errors and warnings.
* Cleanup header comments.
Default to not creating LiteJet switches as these are generally not useful.
* Lint fixes.
* Fixes from pull request feedback.
* Use hass.data instead of globals for data storage.
* Fix lint warnings.
* Sonos responsiveness improvements (async_ coroutines, event based updating, album art caching) + Better radio station information
* Docstring fixes.
* Docstring fixes.
* Updated SoCo dependency + fixed file permissions.
* Only fetch speaker info if needed.
* PEP8 fixes
* Fixed SoCoMock.get_speaker_info to get test to pass.
* Regenerated requirements_all.txt + async fetching of album art with caching + added http_session to HomeAssistant object.
* Unit test fixed.
* Add blank line as per flake8
* Fixed media image proxy unit test.
* Removed async stuff.
* Removed last remnants of async stuff.
* Lazy initialise the worker pool
* Minimize pool initialization in core tests
* Fix tests on Python 3.4
* Remove passing in thread count to mock HASS
* Tests: Allow pool by default for threaded, disable for async
* Remove JobPriority for thread pool
* Fix wrong block_till_done
* EmulatedHue: Remove unused test code
* Zigbee: do not touch hass.pool
* Init loop in add_job
* Fix core test
* Fix random sensor test
* Add Emby Server media_player component
* Code cleanup, move to request sessions, generate UUID per session
* Make media image fetch more robust
* Allow for http or https
* Cleanup some Keyerror conditions found through more testing
* Move EmbyRemote to pip, update requirements
* Code cleanup, add SSL config option
* catch all errors when doing mqtt message unicode-decode.
* added AttributeError and UnicodeDecodeError to exception when decoding an mqtt message payload
* Add link to docs
* Fix link
* Update line breaks
* Update ordering
* Align vera platofrm to only use add_devices
(instead od add_devices_callback)
* Remove line break
* Use consts
* Update ordering
* Update ordering
* Use const, create default name, use string formatting
* Update ordering
* Use const
* Update import style
* Update ordering and line breaks
* update line breaks
* Set default port
* Set defaults and update ordering
* Update ordering
* Minor style updates
* Update ordering, defaults, line breaks, and readability
* Use constants
* Add line breaks
* use string formatting
* Update line breaks
* Update logger
* Fix initialization of zwave color bulbs
Zwave values can be added to the node in any order. This change allows
proper initialization when the multilevel value is added before the
color value.
* Fix incorrect rename of color command class
* Add new const (base)
* Use constant
* Remove second error message, use const, add attribution, add link
to docs, remove unused vars, and a little simplification
* Add quote
* Use const
* Add attribution, simplify the code, and use consts
* Add zone_ignore option for yamaha.
We attempt to discover all zones for yamaha receivers. There are times
when users may want to suppress some zones from showing up. When a
Zone isn't actually connected to speakers, or on some newer receivers
where Zone_4 is an HDMI only zone, that doesn't support even basic
media_player UI.
This provide a mechanism for users to do that.
Fixes#4088
* Update yamaha.py
* successfully tested the "remote temperature mode" switch for the radio thermostat
* removed logging and interpreted None as Off.
* turn_off value is also templated now -- can depend on state
Also, undid accidental removal of error logging.
* ensured backward compatibility of config file
if value_template is not provided, the update function behaves as before
* ran autopep8 --in-place
* fixed another complaint of tox
* addressed the comments of balloob
* undid acccidental log.error to log.info
* timeout : 50 -> 10
* added a timeout parameter
* removed the stray '-', better names for the failure case
* string comparisons after .lower(), as suggested by balloob
* addressed balloob's latest requests
* making flake happy
* value_template --> is_on_template in config file
* moved CONF_IS_ON_TEMPLATE to local file
* null checks
* addressed flake error
* properly comparing template text when is_on is not a template.
* Added a ThingSpeak component
* Forgot a colon. Fixed it
* Some config variables are better required
* New requirements created by the script
* Updated the .coveragerc
* Fixed small linting errors
* Removed unneccessary validation
* Even more linting error fixes
* Changed the way the component listens to state changes
* Removed unneccessary declaration of 'state' variable, referring to new_state instead
This uses the discovery code from netdisco/ha to discover yamaha
receivers. The old discovery code remains if discovery is turned of in
HA, at least for now. Though it probably is worth turning that off in
the future.
* Use unix newlines on test_emulated_hue
This commit switches the test_emulated_hue module to use unix newlines
instead of the DOS style that were there before. (using dos2unix on
the file) This makes it consistent with the other files in the repo.
* Cleanup emulated_hue tests
Previously these tests relied on the mqtt light platform as test devices
to control with the emulated hue. However, this was pretty heavyweight
and required running an MQTT broker in the tests. Instead this commit
switches it to use the demo light platform which is strictly in memory.
Fixes#3549
* Fixes issue #4067 - Wunderground sensor with alerts exceeds API limits
To avoid hitting the max limit of 500 calls per day, this patch keeps weather conditions being updated each 5 minutes
and weather advisories each 15 minutes.
This formula will result the following:
conditions -> 300 seconds -> 5 minutes -> 12 req/h -> 288 req/day
alerts -> 900 seconds -> 15 minutes -> 4 req/h -> 96 req/day
* Using timedelta in minutes instead seconds
* If no weather advisories were issued, state should return 0 instead Unknown
* Updated to keep on the same if statement
* Revert "Updated to keep on the same if statement"
This reverts commit 0e6a94aa0f.
* Sonos improvements: media_* properties delegate to coordinator if speaker is a slave, media_image_url and media_title now works for radio streams, source selection/list takes speaker model into account, commands on slaves delegate to coordinator.
* Fixed failing unit tests.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Pilight sensor component
* Python 3.4 compatibility
* D202
* Use pytest-caplog and no unittest.TestCase
* Fix setup/teardown of unittests
* Activate coverage testing
* Bugfix whitelist filter and use bugfixed pilight library
* Use newest pilight library that has a bugfix
* Add unittest for pilight hub component
* PEP257 for docstrings
* Bugfix setting device name from host name and small cleanup
- Init with connection error handling is more clear
- Comments clean-up
* PEP257
* New unittest with full coverage
* Upload missing testfixtures
* D209
* Handle double quotes in reply
* Formatting
* Added support for Notifications for Android TV / FireTV
* Silly me forgot to commit coverage
* Fixed pylint
* Fixed flake8
* Fixed another flake8 -.-
* Changed option 'ip' to 'host' like most other platforms do
This commit adds a new component for communicating with mochad[1] a
socket interface for the CM15A and CM19A USB X10 controllers. This
commit leverages the pymochad library to interface with a mochad socket
either on a local or remote machine. Mochad is added as as a generic
platform because it supports multiple different classes of device,
however in this patch only the switch device implemented as a starting
point. Future patches will include other devices types. (although
that's dependent on someone gaining access to those)
[1] https://sourceforge.net/projects/mochad/
* iOS component hot fixes around component/platform loading, logging, and more
* Load device_tracker and zeroconf in deps instead of bootstraping
* Change conditional check on status code
* iOS component hot fixes around component/platform loading, logging, and more
* Load device_tracker and zeroconf in deps instead of bootstraping
* Change conditional check on status code
* Adds support for Pioneer AVR interface port number
https://community.home-assistant.io/t/support-for-pioneer-avr/503
telnetlib supports a port number so adding port as
an optional config element with a default of 23 resolves this.
* Adds timeout to Pioneer AVR
timeout in telnetlib defaults to socket._GLOBAL_DEFAULT_TIMEOUT
which is not a value, but rather a bare Object used for comparison.
telnetlib says the following about the timeout optional argument:
"The optional timeout parameter specifies a timeout in seconds
for blocking operations like the connection attempt (if not
specified, the global default timeout setting will be used)."
From the documentation for sockets:
"Sockets are by default always created in blocking mode"
Catching connect and timeout errors, logging to debug
and continuing.
* Catches timeout exceptions, logs and continues.
* Initial commit of the iOS component and platform
* Allow extra
* Add battery to identify, a new function to get devices, and load the upcoming sensor
* Add iOS sensor platform, currently for battery state & level
* Add discoverability for the iOS app
* Convert single quote to double quotes
* Load all required components and platforms when loading the iOS component for the best experience
* Unify quote style to double
* Change to hass_ios
* Update push URL, add support for logging based on status code, log rate limit updates
* Block iOS from coverage checks for now...
* Work better with password-protected Squeezebox / LMS servers, including getting file art. Refactored to only have a single method calling the telent lib. (Should make it easier to convert to the more appropriate JSON interface)
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Adds energy monitoring capabilities to the TP-Link HS110
Energy monitoring works only on the HS110 model
* Reverts to using GadgetReactor's module
* Updates requirements_all.txt
* Refactors tplink switch to use attribute caching
* Update tplink.py
* Add Bbox Routeur bandwidth as sensors
Add possibility to monitor max and currently used bandwidth of your xdsl connection for Bbox Routeur
* Minor Fixes
Unit constant get back into the main sensor file
* Unused round removed
* Add support for Neato Connected robot as a switch
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add checklist items
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add missing docstring
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato] Add update function to retrieve robot state
* Add docstring for update function + catch exception when retrieving state
* Change type of HTTPError when updating state
* Fix pylint errors
* Telstra API component
* import PLATFORM_SCHEMA
* Exclude Telstra notify component in coveragerc
* fix authentication issues
* Include title in SMS if it's provided
* pass lint
* Fix many code styling issues
* Confirm credentials are correct on component setup
* Add initial SNMPv3 support for better security
* Fixed indentation errors
* Fixed flake8 E128 on row 65
* Disabled warning about too many instance-attributes
* Removed extra code, added Inclusive to make better config validation
Changelog: https://github.com/SoCo/SoCo/releases/tag/v0.12
Backwards Compatability changes:
Dropped support for Python 3.2
Methods relating to the music library (get_artists, get_album_artists, get_albums and others) have been moved to the music_library module. Instead of device.get_album_artists(), please now use device.music_library.get_album_artists() etc. Old code will continue to work for the moment, but will raise deprecation warnings
Made a hard deprecation of the Spotify plugin since the API it relied on has been deprecated and it therefore no longer worked
Dropped pylint checks for Python 2.6
* Enhance yamaha component
This enhances the yamaha component to create 1 player per zone,
instead of only one play, which provides direct control of the various
zones for the player.
It also exposes play_media for NET_RADIO sources, which allows direct
setting of that.
This requires code changes in rxv 0.2.0, so the requirement dependency
is raised.
* Support current playback metadata for NET_RADIO
When on NET RADIO, support the currently playing information.
* Pilight daemon expects JSON serializable data. Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use pytest-caplog and no unittest.TestCase
* #3899 - Ecobee tempoeratures
* #3899 Remove unused import
* #3899 Implement min/max_temp in ecobee.py as these temperatures have to be in F for ecobee api.
* #3899 Stale print
* #3899 Use min/max_temp from base class
* #3899 Removed unused import (again) so tests pass since changing to use super class
* #3899 Fix long lines
* #3899 Install tox locally... make it happy, commit
* #3899 Remove overridden min/max_temp and instead update __init__:min/max_temp to convert to self.temperature_unit (of the thermostat) as opposed to self.unit_of_measurement (of the system), which is wrong
* Remove unused import from ecobee
* #3829 - Fixed type LowHighTuple doesn't define __round__ method issue when Nest is operating in range mode
* Testing if temperature is a tuple instead int or float
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* changed to use http/2 library for push notifications
* fixed lint issue
* fixed test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* added missing docstring
* moved service description to main services.yaml file
* renamed apns service
requests/urllib3 is notorious for using the INFO log level for very
DEBUG kinds of information. Given the configurability of python
logging it's actually pretty easy to just set requests to WARN by
default. This cleans out a bunch of largely unuseful log lines from
home assistant output.
Instead of globally using StrictUndefined, introduce a filter that
will trigger a render failure on undefined variables.
Use as `{{ value_json.someval | is_defined }}`.
By not successfully rendering unknown objects to an empty string
the caller provided error_value actually gets used.
This allows, for instance, the MQTT sensor to retain its state when an
unexpected or unwanted message (#2733/#3834) is received.
* Emoncms_history component, fix git mess
* - switch to track_point_in_time to send all data at foxed interval
- don't use json_dump
- switch to http post instead of http get
If a mock's assert_called_once_with method is misspelled (e.g. asert_called_once_with) then the test will appear as passing. Therefore, this commit removes all instances of assert_called_once_with calls and replaces them with two assertions:
self.assertEqual(mock.call_count, 1)
self.assertEqual(mock.call_args, mock.call(call_args))
* first version
* First draft component entities
* Change add_entities to callback from coroutine
* Fix bug add async_prepare_reload
* Group draft v1
* group async
* bugfix
* bugfix v2
* fix lint
* fix extract_entity_ids
* fix other things
* move get_component out of executor
* bugfix
* Address minor changes
* lint
* bugfix - should work now
* make group init async only
* change update handling to old stuff
* fix group handling, remove generator from init
* fix lint
* protect loop for spaming with updates
* fix lint
* update test_group
* fix
* update group handling
* fix __init__ async trouble
* move device_tracker to new layout
* lint
* fix group unittest
* Test with coroutine
* fix bug
* now it works 💯
* ups
* first part of suggestion
* add_entities to coroutine
* change group
* convert add async_add_entity to coroutine
* fix unit tests
* fix lint
* fix lint part 2
* fix wrong import delete
* change async_update_tracked_entity_ids to coroutine
* fix
* revert last change
* fix unittest entity id
* fix unittest
* fix unittest
* fix unittest entity_component
* fix group
* fix group_test
* try part 2 to fix test_group
* fix all entity_component
* rename _process_config
* Change Group to init with factory
* fix lint
* fix lint
* fix callback
* Tweak entity component and group
* More fixes
* Final fixes
* No longer needed blocks
* Address @bbangert comments
* Add test for group.stop
* More callbacks for automation
* Added the ability to Weather Underground to track severe weather alerts
* * Added message on the advisory attr
* Updated tests
* * Making use of guard clause
* Checking multiple_alerts prior loop
* Using a better way to create dict
* Fixed issue to set to None only the object that failed
* Added unittest
* Split update() method to different calls with their one throttle control to minimize API calls
* Updated unittest and make sure the alert sensor will not return 'unknown' status'
* Removed update() method from state property
* Branch rebased and include Weather Underground attribution
* Update wunderground.py
* Relaxes the configuration options for influxdb
By default influxdb allows unauthenticated access
Home Assistant required at least username and password to be present to properly submit data to influxdb
* Removes unused import of 'copy'
The copy module was used only in the removed test case responsible for testing the missing keys
* Updates InfluxDB config schema to require user and password
Current InfluxDB (v 1.0) can work without any authentication, but when authentication is enabled both username and password should be set.
* Removes extra white space in test_influxdb.py
* added error handling to mqtt message receive if payload is not utf-8 unicode
added mqtt test for above code as well
* change permission back to 644
* attempting to test new code
* changed exception to AttributeError
fixed test for above
* fixed lint errors I made in tests....mqtt/test_init.py
* more lint fixes for my added test
* remove dual decode of MQTT payload
* convert if to try, except, else statement for mqtt payload decode
* rework mqtt unicode testing code to properly check for log file entriy on unicode decode exception
* fixed lint error
* Update test_init.py
* Initial Zoneminder commit
* Fixing bug when ZM sets its function to 'None'
* Adding zoneminder to coverage
* Quick Doc fix
* Update zoneminder.py
Doc Fix
* making the url base optional
This adds a sensor component that builds sensors based on the arwn
project (https://github.com/sdague/arwn). This uses a 433mhz receiver
to collect weather data and publish it over mqtt in a well defined
schema, which home-assistant can display as sensors.
* Add Alexa Flash Briefing Skill API support
* Set default value for text to empty string as per API docs
* Clean up existing Alexa tests
* Update configuration parsing and validation
* Add tests for the Flash Briefing API
* Update test_alexa.py
* added include and exclude functionality to history component
* fixed summary lines in test method doc.
* cleanup of query filter creation
* o improved config validation
o move move IGNORE_DOMAINS to Filter.apply()
o removed config from Last5StatesView
o Filters instance is now created on setup
o config values are processed in setup and set to the Filters instance
o function _set_filters_in_query() moved to Filters class and renamed to apply()
* added unittests for more include/exclude filter combinations
* make pylint happy
* Fixes an issue where Chromecast audio groups were not properly discovered
* Forgot to commit the main fix
* Removes unused variable
* Doesn't use a protected API anymore
* PR remarks
* Fixes tests, adds comment
* Restores line as it was in the original commit, rephrases comment
* Should fix lint issues
* Trailing whitespace
* Some more lint
* Add files via upload
* Update .coveragerc
* test
* Update synology camera
* Use voluptuous for synology
* Use voluptuous for synology
* Use voluptuous for synology
* Use voluptuous for synology
* Conform synology to flake8
* Added Whitelist to synology
* Sync to dev branch
* Added helper function to synology
* Separate platform and presentation units in climate
* Fix unit tests
Maybe
* Fix unit tests some more
Maybe
* Rename _platform_unit_of_measurement to temperature_unit
* Fix tests for renamed attribute
* Added additional checks which hides functions which are not support (like fans / humidity / cooling)
* Fixed pylint and flake8 errors (not test file available)
* Fixed pydocstyle error
* Refactored Code and Comments as described in pull-request
* Added additional comment and requesting retest
* Upgraded to python-nest 2.11 which contains previously hidden functions
* Cache condition in helpers.Script
The caching is a simple in-memory, per-instance dictionary.
We use __str__ to format cache keys.
This naive implementation has some disadvantages (e.g., we won't be able
to cache two conditions that contain references to
distinct-but-equivalent object instances and we don't have any control
over the size of the condition cache), but for most simple use-cases the
approach should be good enough.
Resolves#3629
* Fix docstring style
* Basic support for Netatmo welcome binary sensors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Bug fixes and optimization for Netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* pylint fixes
* Bug Fixing and optimization for Netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add unique_id for cameras to avoid duplicate
And global config to disable discovery for netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Change approved_ips from string to cidr validation
Relabel to trusted_networks, better reflecting its expected inputs,
everything that ipaddress.ip_networks recognizes as an ip network
is possible:
- 127.0.0.1 (single ipv4 addresses)
- 192.168.0.0/24 (ipv4 networks)
- ::1 (single ipv6 addresses)
- 2001:DB8::/48 (ipv6 networks)
* Add support for the X-Forwarded-For header
The command line cover value template is optional so we
need to check it's not none before assigning hass to it.
Fixes#3649
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
The command line cover value template is optional so we
need to check it's not none before assigning hass to it.
Fixes#3649
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Initial version of "haveibeenpwned" sensor component
* 2 flake8 fixes
* remove debugging error message
* Increase scan_interval as well as throttle to make sure that during initial startup of hass the request happens with 5 seconds delays and after startup with 15 minutes delays. Scan_interval is increased also to not call update as often
* update .coveragerc
* remove (ssl) verify=False
* - use dict to keep the request values with email as key
- use track_point_in_time system to make sure data updates initially at 5 seconds between each call until all sensor's email have a result in the dict.
* fix a pylint error that happend on the py35 tests
* Add discovery support for Netatmo Weather station
Only The weather information are currently supported (No battery or wifi status supported)
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add unique_id for netatmo sensors to avoid duplicate
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update requirements_all.txt and PEP8 fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Rename Forecast.io platform to Dark Sky
* Upgrade to python-forecastio to 1.3.5
* Update to reflect name change (Forecast.io -> Dark Sky)
* Rename forecast to darksky
* Bugfix signhandling/services
* change from coroutine to callback
* add error handling
* fix bug with endless running
* fix unit test
* Revert "fix unit test"
This reverts commit 31135c7709.
* Disable sigterm/sighup test
* Bugfix signhandling/services
* change from coroutine to callback
* add error handling
* fix bug with endless running
* fix unit test
* Revert "fix unit test"
This reverts commit 31135c7709.
* Disable sigterm/sighup test
* Add async_safe annotation
* More async_run_job
* coroutine -> async_save
* Lint
* Rename async_safe -> callback
* Add tests to core for different job types
* Add one more test with different type of callbacks
* Fix typing signature for callback methods
* Fix callback service executed method
* Fix method signatures for callback
* Template platforms: create_task instead of yield from
* Automation: less yielding, more create_tasking
* Helpers.script: less yielding, more create_tasking
* Deflake logbook test
* Deflake automation reload config test
* MQTT: Use async_add_job and threaded_listener_factory
* Deflake other logbook test
* lint
* Add test for automation trigger service
* MQTT client can be called from within async
commit 220331260e9748ac8e17b3ce776330c1dfb7725b
Merge: 73d93e5c891820
Author: Robbie Trencheny <me@robbiet.us>
Date: Sun Oct 2 17:57:24 2016 -0700
Merge branch 'color_temp_for_mqtt_light' of https://github.com/alterscape/home-assistant into alterscape-color_temp_for_mqtt_light
commit c89182008a
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 23:06:34 2016 -0700
fix missing docstring.
commit e61dda4dd3
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 22:43:04 2016 -0700
fix pep8 errors and typos in tests.
commit 559d1752d2
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 21:41:07 2016 -0700
add tests for mqtt color temp support
commit 702defb932
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 20:55:07 2016 -0700
Add color temp support to mqtt lights.
* Make flux always adjust brightness of light (even when not in XY mode)
* Remove kelvin mode from flux switch
The light/turn_on service only works with mired values, kelvin values
are out of range per the schema.
* Use already defined min/max values for light/turn_on schema
* Clamp temp value to light/turn_on allowed values
* Update notify to expect a list of string targets instead of a single string
* Actually do the thing I set out to do
* Fix notify.group test to expect an array of targets
* REST platform will only use the first target in the list
* Update notify platforms to expect a list of targets
* Update notify services.yaml
* Skip RFXtrx tests unless RFXTRX=RUN
* Remove my previous hacks to slightly speed up rfxtrx
* Exclude RFXTRX tests from coverage
* Remove unused import in rfxtrx tstt
* Add close connection back to RFXtrx tests
* Typo
* Added support for MySensors cover device
* Fixed set_req not defined
* Fixed V_PERCENTAGE is str
* Removed set_cover_position
The MySensors documentation doesn’t specify when sending a V_PERCENTAGE
is allowed.
* Fixed homeassistant/components/mysensors.py line too long
* Fixed lint ATTR_POSITION imported but unused
* Use V_PERCENTAGE for MySensors cover
* Revert "Removed set_cover_position"
This reverts commit d78cb3a04d.
* Fix set_req, ATTR_POSITION not defined
* Added support for non-exactly positionable covers
* Fixed V_PERCENTAGE cast to bool
* Ported MySensors cover back to v1.4
`V_PERCENTAGE` and `V_DIMMER` are aliases just like `V_STATUS` and
`V_LIGHT`, so the code inside `MySensorsCover` doesn’t need to be
updated.
* Fixed v1.5 V_TYPES not in in v1.4 gateway SetReq
* Update Command classes and device types to Sigma SDK
* Fix some pylint
* Seperate constants to file
* Flake8
* coverage and flake8 pylint
* Add services.yaml
* Service descriptions was missing
* Spelling :)
* grammar
* Remove zwave service descriptions from main
* Add ability to change Nest mode to all available options
* Make Nest state reflect current operation not current operation mode
* Update Nest sensor to use operation mode
* Fix linting
* Revert "Make Nest state reflect current operation not current operation mode"
This reverts commit 573ba028d8.
Conflicts:
homeassistant/components/climate/nest.py
* Fixed issue #3574 - Temperature slider fixed on frontend on heat/cool mode
* Fixed target_temperature to return None when self.is_away_mode_on is True
* Add ability to change Nest mode to all available options
* Make Nest state reflect current operation not current operation mode
* Update Nest sensor to use operation mode
* Fix linting
* Revert "Make Nest state reflect current operation not current operation mode"
This reverts commit 573ba028d8.
Conflicts:
homeassistant/components/climate/nest.py
* Fixed issue #3574 - Temperature slider fixed on frontend on heat/cool mode
* Fixed target_temperature to return None when self.is_away_mode_on is True
Sep 29 00:59:22 pi hass[21333]: if self.device.measurment_scale == 'F':
Sep 29 00:59:22 pi hass[21333]: AttributeError: 'Device' object has no attribute 'measurment_scale'
Sep 29 00:59:22 pi hass[21333]: if self.device.measurment_scale == 'F':
Sep 29 00:59:22 pi hass[21333]: AttributeError: 'Device' object has no attribute 'measurment_scale'
* Update ecobee to use only range setpoints
* Update nest to only use range setpoints
* Update demo to use only range for ecobee test device
* Update test
* Fetch unit from ecobee
* generic_thermostat did not have state
* generic_thermostat test update
* Platform schema had duplicate retain keys, which made it always set
to default.
* Optimistic state changed was inverted, due to using integer position
instead of boolean.
* Add more tests for mqtt cover.
* Add new component for licence plates processing (OpenAlpr)
* address balloobbot comments
* add to coveragerc
* move config from device to base
* fix lint
* move local api test to voluptous
* split render engine
* change cloud_api pip string & lint
* update requirements_all.txt
* fix lint
* update cloud_api url
* convert base64 byte string to string
* Update cloudapi / add configence / add state
* fix lint
* change state to high confidence plate
* fix cloudapi
* fix local api detection
* add wraper for local api
* fix lint
* fix wrong import
* fix HAAlpr name
* update ha-alpr without async
* support only eventbased requests with interval 0
* fix minor things
* fix lint
* fix lint2
* Added play media to squeezebox
The squeezebox component can now add a URI to an existing playlist or just over write it to force a stream to play.
* Cleaned up flake8 issues with formatting.
Spacing... The end of the world! Fixed. Once day the tools will fix this on the fly, one day...
[x] ./homeassistant/components/media_player/squeezebox.py:307:1: W293 blank line contains whitespace
[x] ./homeassistant/components/media_player/squeezebox.py:366:1: W391 blank line at end of file
[x] ./homeassistant/components/media_player/squeezebox.py:366:1: W293 blank line contains whitespace
Updated SUPPORT_SQUEEZEBOX to add SUPPORT_PLAY_MEDIA
[x] ./homeassistant/components/media_player/squeezebox.py:13:1: F401 'homeassistant.components.media_player.SUPPORT_PLAY_MEDIA' imported but unused
* Updates from review
Updated the comments to indicate they are developer / API comments and not for end users.
Marked the private functions with a leading underscore (_)
* Fixed Lint issues.
202ERROR: InvocationError: '/home/travis/build/home-assistant/home-assistant/.tox/lint/bin/flake8'
203lint runtests: commands[1] | pylint homeassistant
204************* Module homeassistant.components.media_player.squeezebox
205C:322, 0: Trailing whitespace (trailing-whitespace)
* Added Support for mysensnors Climate/HVAC device
* Added Support for mysensnors-hvac device:fix pylint error
* Added Support for mysensnors-hvac device:fix pylint error2
* Fixed Issues in code as per review comments
* Fixed Linter Errors
* Fixed Linter Errors:2
* Fixed Linter Errors:2
* Fixed Linter Errors
* Fixed Linter Errors
* Fixed Linter Errors
* Added Support for MySensors HVAC| Fixed Review Comments| Removed Additional Comments
* Added Support for MySensors HVAC| Fixed Review Comments Itr2
* Changes to correctly support devices with both high and low bound temperatures
* Changed to optimize the code
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Added the ability to trigger the alarm.
* Bump version of pyenvisalink to 1.3
* Fixed an issue where the panic_type was not passed to the sub-components properly.
* Bump pyenvisalink version, and make default panic mode = police.
* Pass in event loop to pyenvisalink.
* Made the components play nicely with asyncio.
* Bump pyenvisalink to 1.6
* Bump up pyenvisalink, and better handle synchronous setup.
* Added the possibility to manually specify a Yamaha Receiver
* Added the possibility to manually specify a Yamaha AVR
* Using string formatting
* Hostname checks for None now
* Do not use add_devices for each if-branch separately
* Fixed linting
* Update __init__.py
addedattribute "WHITE_VALUE" to improve support for RGBW devices
* Update services.yaml
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
shortened line
* Update __init__.py
* Update __init__.py
* Add mysensors RGBW and light tests
* Activate support for mysensors RGBW devices with support for
white_value attribute.
* Add white_value support in light demo platform.
* Add tests for white_value and more for light component.
* Add tests for light demo platform.
* Fix import order in check_config.
* o added ability to exclude entities or domains from logbook
o exclude hidden entities
* fixed remaned configuration key
* - filter the events before they get passed to humanify, to separate concerns
- instead of looking at customize, look for the hidden attribute on the state change events
- access to configuration defaults to an empty list - no need to check
* - filter only events of type EVENT_STATE_CHANGED
- improve config handling
* added unit tests to cover all filter cases and logbook message creation
* Added email component
* added email sensor component
* added doc string to test class
* fixed lint error
* fixed lint error
* rename of email component
* added another block as test fails on CI
* added retry to multi email test
* added delay to retry
* added to .coveragerc
* removed sleep from tests and fixed up stale comments
* Move worker pool monitoring to be time based instead of add_job based.
* Stub out worker pool monitor during tests
* Add test for monitor worker pool.
* Improve naming
* Test stop_monitor coroutine
* Add async_create_timer test
* Finish rename create_timer
* Added support to Yahoo Finance to track the stock market within Home Assistant
* Fixed pylint issues
* Fixed formatting issues
* Fixed pep257 issues
* - Fixed URL link
- Added attributes for Yahoo Finance
* Removed price sales ATTR
* Fixed lint and flake8 issues. Added attribution to Yahoo! per https://developer.yahoo.com/attribution/
* Fix test shutdown to ensure loop/threads are clean.
We now ensure the loop is closed, it has completed, and the
executer has completed. This ensure all threads are freed
up with any test calling hass.stop().
* Fix lint issue with run_loop
* Update Ecobee state after making changes to climate
Without this, climate and sensor state will take up to 3 minutes
(the MIN_TIME_BETWEEN_UPDATES on its update throttle) to update in
the interface, which makes it more difficult to do automation around the
state.
* Use a boolean instance variable that update can check, rather than always calling update
* Add PyBluez to Dockerfile
Adds PyBluez to Dockerfile so people using Docker can run Bluetooth
devices
* Remove pip install of pybluez
Pybluez will be installed automatically when the Bluetooth device
tracker is enabled
* Add Initial version for emoncms feeds sensor
* flake8 test fixes
* pylint test fixes
* - fix bug with include_feed_id_names not assigning the name to the element in the same postion as found in include_feed_id
- a few structure changes to have less nesting (pylint fix)
- minor other changes
* update .coveragerc
* voluptuous fixes:
- exclude_feed_id and include_feed_id Exclusive group so that only one (or none) can be specified at once
- id must be positive int
- exclude_feed_id and include_feed_id must be positive int
* Fix comment so it refers to the documentation
* use string formatting
* Remove outer try
* clean up sensors.append calls
(break them out for loop)
* multiple changes like:
- rename config value "include_feed_id" to "include_only_feed_id"
- rename config value "include_feed_id_names" to "sensor_names"
- renamed config value sensor_names is now a dictionary an can also be used when renamed config value "include_only_feed_id" is not specified
- Set default value for scan_interval using the config validation
- blank lines between default, 3rd party and own imports
- removed homeassistant.util import, it was not needed anymore
* fix extended voluptuous schema
scan_interval should not be extended to PLATFORM_SCHEMA as it was already in the schema by config_validation helper so i should not add / change it. It was also causing problems reading the value from the config.
* Use Home Assistant polling
* remove statement that can never happen
* Guard clause
* Reduce instance variables
* Implemented onkyo reconnect
Connection object is cleared after a failed command. It will be
automatically recreated upon the next command running. This should allow
for failed connections to be restored.
* Remove reduntant error catching
* Run all update commands with command wrapper.
* Handle errors better
* Removed unused global
I have no idea how that got there.
* First version of the MiFlora sensor (not yet finished)
* First workign version
* Added some documentation
Get name from sensor, if not defined
* Ignore IOError
* Added force_update option
* Updated comments
* Renamed fertility to conductivity (what it really is)
* MiFlora library update
* Updated helper files
* Formatting
* Fixed pylint errors
* Removed default from monitored conditions
* Removed KeyError handling as a KeyError should never be raised
* Added a return when no data is received
* emoved unnecessary return statement
* Changed default name
* Changes quotes and string operation ( @Teagan42 )
* - number of samples for median calculation is now configurable
- set state to None if no data could be polled from sensor
* Bugfix in library
more logging
* Fixed miflora version number
* Added Sensor Support for KNX Devices
Added Sensor for KNX Group Addresses
- Temperature
- Wind Speed
- Illuminance(LUX)
Mostly to fetch from a KNX Wetterstation
* Some pylint,flake8 fixes
* Pydoc Fixes
* Fix Coverage Ordering
* Refactor KNX Sensor
Refactor to Idea from @usul27 and added Minimum Maximum
* Removed Measurement Untis from const.py
Removed needed Measurement Units from const.py and add it to
sensor\knx.py
* Change .coveragerc
* Add as Requested from @Teagan42 the new Type Names
Additional add CONF_MINIMUM and CONF_MAXIMUM
* Added Changes as Requested from @Teagan42
* Fixed the Merge Conflict, Hopefully i done it rigth :-)
* Fixed Styling
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Add event loop to the core
* Add block_till_done to HA core object
* Fix some tests
* Linting core
* Fix statemachine tests
* Core test fixes
* fix block_till_done to wait for loop and queue to empty
* fix test_core for passing, and correct start/stop/block_till_done
* Fix remote tests
* Fix tests: block_till_done
* Fix linting
* Fix more tests
* Fix final linting
* Fix remote test
* remove unnecessary import
* reduce sleep to avoid slowing down the tests excessively
* fix remaining tests to wait for non-threadsafe operations
* Add async_ doc strings for event loop / coroutine info
* Fix command line test to block for the right timeout
* Fix py3.4.2 loop var access
* Fix SERVICE_CALL_LIMIT being in effect for other tests
* Fix lint errors
* Fix lint error with proper placement
* Fix slave start to not start a timer
* Add asyncio compatible listeners.
* Increase min Python version to 3.4.2
* Move async backports to util
* Add backported async tests
* Fix linting
* Simplify Python version check
* Fix lint
* Remove unneeded try/except and queue listener appproriately.
* Fix tuple vs. list unorderable error on version compare.
* Fix version tests
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Extend schema
* Update ordering
* Add line breaks
* Align callback name with other platforms
* ALign callbackname with other platforms
* Update callback name to match other platforms
* Update callback name
* Update callback name
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Removed redundant assignment to CONF_WAYPOINT_IMPORT_USER
* Fixed zone test break and code style issues
* Fixed style issues
* Fixed variable scope issues for entities
* Fixed E302
* Do not install pip packages in tests
* EventBus: return function to unlisten
* Convert automation to entities with services
* Refactored zone creation based on code review feedback, enhanced configuration
* Added unit test to enhance waypoint_whitelist coverage
* Fix JSON encoder issue in recorder
* Fix tests docstring
* * Improved zone naming in waypoint import
* Added more test coverage for owntracks and zone
* Back to 0.28.0.dev0
* Code review feedback from @pavoni
* Added bitfield of features for flux_led since we are supporting effects
* Host should be optional for apcupsd component (#3072)
* Use voluptuous for file (#3049)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix linting
* Upgrade pyuserinput to 0.1.11 (#3068)
* Upgrade pyowm to 2.4.0 (#3067)
* improve isfile validation check (#3101)
* Refactor notification titles to allow for them to be None, this also includes a change in Telegram to only include the title if it's present, and to use a Markdown parse mode for messages (#3100)
* Fix broken test
* rfxtrx sensor clean up
* Bitcoin sensor use warning instead of error (#3103)
* Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107)
* Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Use voluptuous for xmpp (#3127)
* Use voluptuous for twitter (#3126)
* Use voluptuous for Fritzbox and DDWRT (#3122)
* Use Voluptuous for BT Home Hub (#3121)
* Use voluptuous for syslog (#3120)
* Use voluptuous for Aruba (#3119)
* Use constants, update configuration check, and ordering (Pilight) (#3118)
* Use contants, update configuration check, and ordering
* Fix pylint issue
* Migrate to voluptuous (#3113)
* Fix typo (#3108)
* Migrate to voluptuous (#3106)
* Update voluptuous (#3104)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Migrate to voluptuous (#3096)
* Migrate to voluptuous (#3084)
* Fixed Homematic cover (#3116)
* Migrate to voluptuous (#3069)
🐬
* Migrate to voluptuous (#3066)
🐬
* snapcast update (#3012)
* snapcast update
* snapcast update
* validate config
* use conf constants
* orvibo updates (#3006)
🐬
* Update frontend
* move units to temperature for climate zwave. wrong state was sent to mqtt cove
* Use voluptuous for instapush (#3132)
* Use voluptuous for Octoprint (#3111)
* Migrate to voluptuous
* Fix pylint issues
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Updated braviatv's braviarc version to 0.3.4 (#2997)
* Updated braviarc version to 0.3.4
* Updated braviarc version to requirements_all.txt
* Use voluptuous for Acer projector switch (#3077)
🐬
* Use voluptuous for twilio (#3134)
* Use voluptuous for webostv (#3135)
* Use voluptuous for Command line platforms (#2968)
* Migrate to voluptuous
* Fix pylint issues
* Remove FIXME
* Split setup test
* Test with bootstrap
* Remove lon and lat
* Fix pylint issues
* Add coinmarketcap sensor (#3064)
* Migrate to voluptuous (#3142)
🐬
* Back out insteon hub and fan changes (#3062)
* Move details to docs (#3146)
* Update frontend
* Use constants (#3148)
* Update ordering (#3149)
* Migrate to voluptuous (#3092)
* Display the error instead of the traceback (notify.slack) (#3079)
* Display the error instead of the traceback
* Remove name for check
* Automatic ODB device tracker & device tracker attributes (#3035)
* Migrate to voluptuous (#3173)
* Add voluptuous for tomato and SNMP (#3172)
* Improve voluptuous and login errors for Asus device tracker (#3170)
* Add exclude option to nmap device tracker (#2983)
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Added Xbox Live component (#3013)
* Added Xbox Live component
* Added Xbox Live sensor to coveralls
* Added init success checks
* Added entity id
* Adding link_names to post.message call (#3167)
If you do not turn link_names on, Slack will not highlight @channel and @username messages.
* Allow https (fixes#3150) (#3155)
* Use constants (#3156)
* Bugfix: ctach Runtime errors (#3153)
"RuntimeError: Disable scan failed" has been seen in a live installation
* Migrate to voluptuous (#3166)
🐬
* Migrate to voluptuous (#3164)
🐬
* Migrate to voluptuous (#3163)
🐬
* Migrate to voluptuous (#3162)
🐬 and 🍪 for fixing quotes!
* Exclude www_static from pydocstyle linting (#3175)
🐬
* Migrate to voluptuous (#3174)
* Migrate to voluptuous (#3171)
* Use voluptuous for mFi switch (#3168)
* Migrate to voluptuous
* Take change configuration into account
* Migrate to voluptuous (#3144)
🐬
* Add the occupancy sensor_class (#3176)
Such a complicated PR
* Update frontend
* Use voluptuous for Unifi, Ubus (#3125)
* Using alert with Hue maintains prior state (#3147)
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* MQTT fan platform (#3095)
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* Add Sphinx API doc generation (#3029)
* add's sphinx project to docs/ dir
* include core/helpers autodocs for API reference
* Allow reloading automation without restarting HA (#3002)
* Migrate to voluptuous (#3182)
🐬
* Migrate to voluptuous (#3179)
🐬
* Added scale and offset to the Temper component (#2853)
🐬
* Use voluptuous for BT and Owntracks device trackers (#3187)
🐬
* Correct binary_sensor.ecobee docs URL
* Use voluptuous for Hikvisioncam switch (#3184)
* Migrate to voluptuous
* Use vol.Optional
* Use voluptuous for Edimax (#3178)
🐬
* Use voluptuous for Bravia TV (#3165)
🐬
* Added support to 'effect: random' to Osram Lightify lights (#3192)
* Added support to 'effect: random' to Osram Lightify lights
* removed extra line not required
* Use voluptuous for message_bird, sendgrid (#3136)
* Try out the RTD theme
* Doc updates
* Update voluptuous for existing notify platforms (#3133)
* Update voluptuous for exists notify platforms
* fix constants
* Simple trend sensor. (#3073)
* First cut of trend sensor.
* Tidy.
* Migrate to voluptuous (#3193)
* Migrate to voluptuous (#3194)
🐬
* Migrate to voluptuous (#3197)
* Migrate to voluptuous (#3198)
🐬
* Use extend of PLATFORM_SCHEMA (#3199)
* Migrate to voluptuous (#3202)
🐬
* Updated to use the occupancy sensor_class (#3204)
🐬
* Migrate to voluptuous (#3206)
* Migrate to voluptuous (#3207)
* Migrate to voluptuous (#3208)
🐬
* Migrate to voluptuous (#3209)
🐬
* Migrate to voluptuous (#3214)
* Use voluptuous for SqueezeBox (#3212)
* Migrate to voluptuous
* Remove name
* Migrate to voluptuous and upgrade uber_rides to 0.2.5 (#3181)
* Migrate to voluptuous (#3200)
🐬
* Use Voluptuous for Luci and Netgear device trackers (#3123)
* Use Voluptuous for Luci and NEtgear device trackers
* str_schema shortcut
* Undo str_schema
* change update handling with variable for breack CCU2 (#3215)
* Update ordering (#3216)
* Docs update
* Flake8/pylint
* Add new docs requirements
* Update email validation (#3228)
🐬
* Fix email validation (fixes#3138) (#3227)
* Upgrade slacker to 0.9.25 (#3224)
* Upgrade psutil to 4.3.1 (#3223)
* Upgrade gps3 to 0.33.3 (#3222)
* Upgrade Werkzeug to 0.11.11 (#3220)
* Upgrade sendgrid to 3.4.0 (#3226)
* Bluetooth: keep looking for new devices (#3201)
* keep looking for new devices
* Update bluetooth_tracker.py
* change default value for tracking new devices
* remove commented code
* dlink switch added device state attributes and support for legacy firmware (#3211)
* Use voluptuous for free mobile (#3236)
* Use voluptuous for nma (#3241)
* Improve 1-Wire device family detection and error checking. Use volupt… (#3233)
* Improve 1-Wire device family detection and error checking. Use voluptuous
* Fix detection of gpio connected devices
* Replace rollershutter and garage door with cover, add fan (#3242)
* Use voluptuous for Alarm.com (#3229)
* Use voluptuous for gntp (#3237)
* Use voluptuous for pushbullet, pushetta and pushover (#3240)
* Migrate to voluptuous (#3230)
🐬
* Fix mFi sensors in uninitialized state (#3246)
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Use voluptuous for PulseAudio Loopback (#3160)
* Migrate to voluptuous
* Fix conf var
* Use voluptuous for Verisure (#3169)
* Migrate to voluptuous
* Update type and add missing config variable
* thread safe modbus (#3188)
* Upgraded fitbit to version 0.2.3 which fixed oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) (#3244)
* update ffmpeg version to 0.10 add get image to camera (#3235)
* Migrate to voluptuous (#3234)
* fix bugfix with unique_id (#3217)
* Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop
* zxt_120
* Wink not migrated to cover
* Clarifying debug
* too long line
* Only add 1 device entity
* Owntracks voluptuous fix (#3191)
* Zwave set temperature fix (#3221)
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
* Change PR to suggestion on gitter (#3243)
* Reload groups (#3203)
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* fix remove listener (#3196)
* Add linux battery sensor (#3238)
* protect service data for changes in calls (#3249)
* protect service data for changes in calls
* change handling
* move MappingProxyType to service call
* Fix issue #3250 (#3253)
* Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants
* Make API key optional
* issue #3250
* Add voluptuous to ecobee (#3257)
* Use constants and update ordering (#3261)
* Add support for complex template structures to data_template (#3255)
* Improve yaml fault tolerance and handle check_config border cases (#3159)
* Use voluptuous for nx584 alarm (#3231)
* Migrate to voluptuous
* Fix pylint issue
* fastdotcom from pypi (#3269)
* Use constants and update ordering (#3268)
🐬
* Use constants and update ordering (#3267)
🐬
* Add additional template for custom date formats (#3262)
I can live with a few visual line breaks 🐬
* Use constants and update ordering (#3266)
* Updated braviatv's braviarc version to 0.3.5 (#3271)
* Use voluptuous for Device Sun Light Trigger (#3105)
* Migrate to voluptuous
* Use default
* Point to master till archive is back (#3285)
* Pi-Hole statistics sensor (#3158)
* Add Pi-Hole sensor
* Update docstrings and remove print()
* Use None for payload
* Added stuff for support range setting (#3189)
* cleanup Homematic code (#3291)
* cleanup old code
* cleanup round 2
* remove unwanted platforms
* Update frontend
* Hotfix for #3100 (#3302)
* Fix TP-Link Archer C7 long passwords (#3225)
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* modbus write registers service (#3252)
* Fix bloomsky platform discovery (#3303)
* Remove dev tag
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Host should be optional for apcupsd component (#3072)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Fixed Homematic cover (#3116)
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Merge pull request #3130 from turbokongen/zwave_fixes
Bugfix. climate and covermqt
* Back out insteon hub and fan changes (#3062)
* Bump version
* Special frontend build for 0.27.2
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* Allow user to configure server id to perform speed test against
* Don't overwrite list
* Type-o
* Convert to string
* Append lists
* str(None) => 'None' did not realize that.
* Map Modes to setpoint indexes
* Fixes devices with no thermostat mode
* another try to fix devices without mode
* another try to fix devices without mode 2
* another try to fix devices without mode 3
* fix setting setpoint for devices with no mode
* fix setting setpoint for devices with no mode
* Update attr to property and default state method
* State prop is defined in parent class
* Demo platform fan
* PyDoc
* Copy-pasta artifact
* PyDoc
* Linting
* Raise error if turn_off and turn_on not implemented
* Update demo platform
* Initial unit test commit
* Readability
* Unneeded typing
* Should inherit from fan entity
* Turn off polling
* Initial oscillating flag
* Pass HASS into demo
* Typing
* Invoke set_speed instead of setting directly
* Service update
* Update demo tests
* Forgot to block after service call.
* linting
* Test to make sure not implemented is thrown
* Is On Method test
* Update const to match string
* Update services yaml
* Toggle method
* Toggle service
* Typing
* TYPE O
* Attribute check
* Type-o
* Type-o
* Put typing back
* ToggleEntity
* Linting
* Linting
* Oops
* Stale prints
* Demo support
* Initial code for alexa_local_control.
* Added support for creating a dummy username.
* Move SSDP responses to local variables.
* Added config validation via Voluptuous.
* Modify and remove unnecessary returned emulated bridge values.
* Remove script and scene domains from default exposed domains.
* Replaced Flask with HomeAssistantWSGI.
* Fix lint errors.
* Correcting grammar and spelling in docs and comments.
* Rename alexa_local_control to emulated_hue.
* Rename emulated_hue attributes.
* Fix a bug where something marked not exposed is exposed by default.
* Make sure the UPNP responder thread cleanly stops when HASS stops.
Also fix some config loading and lint errors.
* Fixed unexposed entities still having individual state exposed.
* Started writing tests for emulated_hue.
* Fix being able to set state of non-exposed entity.
* Another test for emulated_hue.
* More tests for emulated_hue.
Also slightly simplified emulated_hue's PUT handler.
* Fix bad test, sorry :/
* Third time's the charm.
* Fix lint and value validation tests.
* Rename emulated_hue bridge name.
* Remove license and documentation from header.
* Combine two if statements.
* Style changes.
* Fixed various issues and added some constants
* Use mqtt component to enable a MySensors MQTT gateway.
* Setup the MQTT gateway if mysensors config has mqtt as a value for
the key device in the list of gateways.
* Simplify two lines in the mqtt component.
* adding pull mode and relay time
* fixing failing tests
* removed unused vars, removed trailing whitespace
* removed white space
* split line in 2
* removed whitespace and fixed indent
* undid line break
* Update rpi_gpio.py
new line so its not too long
* back to no new line
* Moved long method to a new line
* Moved comment
* moved comment to above method
* adding required blank line
* fixed variables and made them optional
misunderstood the logic at first.
* removed line for lint and removed vars that were not required
* added second blank line for class
* added new configs to platform_schema - still have same error on load
* changing string to int
* added code to covers rpi as well
* Implement support for NEST structures.
* Conform to balloobbot style preferences.
* Log to debug level rather than info level.
* Use config validation to coerce list format if supplied as string.
* Use list comprehension for more succinct code.
* Conform to project linting standards.
* First draft for cover component
* Efficiency from @martinhjelmare
* migrate demo
* migrate demo test
* migrate command_line rollershutter
* migrate command_line test
* migrate rpi_gpio garage_door
* make some abstract methods optional
* migrate homematic
* migrate scsgate
* migrate rfxtrx and test
* migrate zwave
* migrate wink
* migrate mqtt rollershutter and test
* requirements
* coverage
* Update mqtt with garage door
* Naming and cleanup
* update test_demo.py
* update demo and core
* Add deprecated warning to rollershutter and garage_door
* Naming again
* Update
* String constants
* Make sure set_position works properly in demo too
* Make sure position is not set if not available.
* Naming, and is_closed
* Update zwave.py
* requirements
* Update test_rfxtrx.py
* fix mqtt
* requirements
* fix wink version
* Fixed demo test
* naming
* Add support for notifying with Slack messages.
When creating notifications, this allows you to pass in `attachments`
with the `data`. It's an array of attachments as defined in
https://api.slack.com/docs/message-attachments
When passing in attachments, message is still required, but it's okay to
be a blank string.
* Split over multiple lines
* Make sure attachments gets assigned, even if there isn't attachment data
* Added support for serial HM-Z19 CO2 sensor
* Minor pylint bug fixes
* Added new files to .coveragerc
* Removed newline
* Changes in requirements after change of pmsensor library
* Change the implementation of default name
* Check if serial interface is working before adding the sensor
* Maximum sensor value is 5000ppm
The repository already merged the pull request adding python3 support.
root is no longer required to use the gpio.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Clean-up, ordering, constants, and extend of schema
* Put REQUIREMENTS back and re-add line breaks
* Clean-up, ordering, constants, and extend of schema
* Extend platform
* Move secret cache out of loader so it can be referenced by other folders
* Unit test to verify secrets from another folder work & see if it overrides parent secret
* Clear secret cache after load
Current documentation suggests to use personal API tokens. This isn't
ideal because for a few reasons:
* messages will come as your own user, so it's hard to tell it's coming
from hass
* it's harder to manage if multiple people are using Slack and home
* assistant, since you'd have to coordinate rolling of it
It is possible to use Slack bot users already. Just make a new one from https://your-team.slack.com/apps/build/custom-integration, and use the token for that. You can even add an icon from the web frontend for home assistant.
However, the message will appear as a bot without a name or icon. This pull requests fixes this by passing the as_user parameter, which uses the bot user's name and icon.
One caveat is you need to invite the bot user into the room you want to
post to. This probably was an issue before though.
🎩 to @jnewland who pointed me to this in his branch
* Added support for name
Added name support and changed default name to "Forecast.io" since "Weather" had conflict with Yahoo weather and Open weather map
* Update forecast.py
* Added Bluetooth Low Energy device tracker
* Added new file(s)
* Fixed pylint errors
* Remove traling zeros from device names
* recreated deleted file
* Added requirements
* Renamed to bluetooth_le tracker
Removed gattlib from tests
Minor code cleanup
* - fixed .coveragerc bug
- changed discovery algorithm, new devices will only be added if seen 5 times to make sure
HA doesn't blow the database with devices just passing by
Currently there are only hw inputs in the sources list.
Other interesting inputs can be live tv (dvbt) and vod apps.
* add customize option for webos
* add short names for livetv, youtube, mako apps
* add current app as a source
* use large icon (largeIcon is the same as icon if doesn't exists)
* filter out hw inputs that are not connected
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Add action and callback support to html5 (#2855).
Remove registrations from the callback view since we always get the latest anyway.
We dont put an audience in the claims so we will never hit this error.
Bring tests back up to where they were before callbacks.
Only import jwt where necessary
Fix bracket spacing errors
Fix JWT decode check for loop
Remove stale comment.
Add tests for the callback system.
Shorten line
Disable pylint broad-except and change e to jwt_decode_error.
Verify expiration
Remove duplicate jwt.exceptions.DecodeError
Catch no keys matched and return False
* Switch to using registrations for callbackview instead of json_path
* Only check for URL and such if the data object actually exists
* raise instead of return
* cleanup decode_jwt
* Clean up JWT errors
* Correctly set status_code to 401
* Improve JWT by adding target to claims and attempting to check the given target for a decode match first, as well as pass the target through in the event payload.
* Add tag support and fix formatting issues
* Pass through any keys that dont apply to the payload into the notification.data dictionary
* Remove stale print
* Pass back the data dictionary if it exists
* Actually put the default url even if a notify payload dictionary doesnt exist
* pylint, flake8
* Add subscription validation
* Add validation for the callback event payload and use constants where possible
* Use HTTP_UNAUTHORIZED instead of 401
* Change callback dictionary to dict instead of cv.match_all
* Fix up tests and make subscription required
* Whoops, that test was supposed to fail
* Use the result of CALLBACK_EVENT_PAYLOAD_SCHEMA as event_payload
* Add a test for html5 callback decode_jwt where the device has been renamed since notification has been sent.
* Remove the loop through logic, assume that target is always in JWT
* Always return something instead of possibly None.
* Update frontend
* Add a group notify platform which allows sending a single notification to multiple platforms.
* Correctly sort group.py
* Clean up the payload logic
* Make name and entity id required in the schema
* Deep update the dictionary to fix a bug where data wasnt merging.
* Add notify.group tests.
* Improve docstrings.
* Change entities to services and entity_id to service
* Make service a slug without a default value
* Update tests for entities->services, entity_id->service
* vol.Any(cv.slug) -> cv.slug
* First pass on providing individual services for all possible targets that a notification platform supports.
* Add a quite hacky first version of notification groups
* Add a docstring for get_targets
* Register group service under notifygroup/ and safely check for notifygroups in config
* Remove notifygroups, because it belongs in its own PR
* Make @balloob requested changes
* get_targets()->targets
* Add tests for notify targets exposed as individual services
* If we dont have a platform name set in configuration, lets use the name of the platform instead of notify
* Fix test docstring.
* Dont use a dictionary for just one value
* No need to double slugify
* targets is now just a list of strings instead of a dict
* Support passing an email address linked to Gravatar as the picture in known_devices.
* Add a dedicated field for Gravatar
* Bring tests back up to where they were before Gravatar.
* Add tests for Gravatar.
* Retry sending the push for 1 day instead of failing instantly if the target is unavailable
* Add timestamp to push payload
* Correctly use the title and body fields for their intended purposes
* Add callback support
* Revert changes to frontend files.
* Add default URL which will open Home Assistant. Also put all the data into the data object of the payload so it is accessible in the browser. Without doing this, things like URL wouldnt be accessible.
* Flake8 and pylint fixes
* event->type
* Dont send the default url if actions exist
* flake8/pylint fixes again
* Update html5 tests
* Remove callbacks from this branch, will re-stage on a different branch
* Remove remnant of callbacks
* Add url to data dictionary if it exists instead of copying the entire data dictionary in
* flake8 fix
* Add FritzBox call monitor sensor
* Correct docstrings and suppress too few public methods warning
* Remove blank lines after docstrings
* Add blank lines after class docstrings
* Remove trailing white space
* Make daemon; add reconnect on disconnect
* HP ILO component
* HP ILO component
* Add Onboard Administrator sensor
* Add Onboard Administrator sensor
* Add period to first line
Fix D400 error on line 1
* Fix log message for deprecated temp key
* Use string formatting and pass constant variables as arguments in log
message to show correct name of config keys.
* Fix import order
* Initial work to add Chrome Push Notification support
* Remove push.js from home-assistant since it is now in Polymer
* Chrome->HTML5, general cleanup/fixes
* Make html5 generic, move manifest.json into frontend so that we can dynamically add the gcm_sender_id
* Pylint, flake8, pydocstyle frontend init
* HTML5 push fixes
* Update polymer
* Remove crypto req
* Add notify default platform.
* Fix HTML5 push
* Registration fixes
* Linting fix
* pep257 fix
* Add tests
* pep257 fix
* Update frontend
* Implemented range checking for temperature and humidity. Out-of-range values will be ignored
* Removed unused import
* Use celsius_to_fahrenheit conversion method
* Add support for GPSD
* Add gpsd.py
* Check if socket is open
* Fix pylint issue
* Rename file to be a sensor
* Update for being a sensor
* Rework for being a sensor
* Add support for new mqtt_json light platform.
* Fix W503 errors.
* Bring in feedback from @balloob.
* Add test coverage for invalid color and brightness data.
* Add coverage for transition in turn_off.
* New component to interface with a pilight-daemon for RF send/receive
* Fix bug that changed the received data, add connected flag, clean up
* New pilight switch component
* New optional whitelist filter to filter uninteressting devices
* Add pilight
* PEP8: too long lines, white spaces
* To keep up the good coverage ...
* PEP 257
* pylint enhancements
* pylint enhancements
* PEP 257
* Better HA config validation and cleanup following code review for #2742
* Fix requirenments to require fixed pilight version
* Change config validation to use voluptuous
* Pilight switch exclude not needed due to wildcard pilight exclude
* Enhance configuration parsing using voluptuous
* Added optional embedded image attachments to notify.smtp.
Also restructured a bit to minimize code duplication and add some tests.
* Fixed formatting errors.
* SMTP cleanups thanks to code review.
* Add a Foursquare component which accepts push notifications from Foursquare and provides a user checkin service
* @balloob requested fixes
* Sort .coveragerc list of components by name
* Revert "Sort .coveragerc list of components by name"
This reverts commit 997ae22576.
* Only sort Foursquare since I get conflicts otherwise
* Add Foursquare checkin service to services.yaml
* Update to latest Plex API, add music support.
* Fix PyLint errors.
* Update Plex sensor module to latest PlexAPI.
* Oops - update Python sensor import.
* According to PlexAPI docs, this is the new API for Plex Pass members.
* More pylint STFUs.
* Move pylint suppression.
* Use plexapi NA type directly.
* Pylint objects to short variable names.
The 0.3.1 version of the library includes fixes for time syncing the
thermostat under the covers when needed. All changes are done on the
library side, we just need to bump the required level in home
assistant.
* Fix: Circular dependencies of internal files
* Change: dt.date for Date and dt.datetime for DateTime
* Use NewType if available
* FIX: Wrong version test
* Remove: Date and DateTime types due to error
* Change to HomeAssistantType
* General Improvement of Typing
* Improve typing config_validation
* Improve typing script
* General Typing Improvements
* Improve NewType check
* Improve typing db_migrator
* Improve util/__init__ typing
* Improve helpers/location typing
* Regroup imports and remove pylint: disable=ungrouped-imports
* General typing improvements
Add unit symbol constants
Initial unit system object
Import more constants
Pydoc for unit system file
Import constants for configuration validation
Unit system validation method
Typing for constants
Inches are valid lengths too
Typings
Change base class to dict - needed for remote api call serialization
Validation
Use dictionary keys
Defined unit systems
Update location util to use metric instead of us fahrenheit
Update constant imports
Import defined unit systems
Update configuration to use unit system
Update schema to use unit system
Update constants
Add imports to core for unit system and distance
Type for config
Default unit system
Convert distance from HASS instance
Update temperature conversion to use unit system
Update temperature conversion
Set unit system based on configuration
Set info unit system
Return unit system dictionary with config dictionary
Auto discover unit system
Update location test for use metric
Update forecast unit system
Update mold indicator unit system
Update thermostat unit system
Update thermostat demo test
Unit tests around unit system
Update test common hass configuration
Update configuration unit tests
There should always be a unit system!
Update core unit tests
Constants typing
Linting issues
Remove unused import
Update fitbit sensor to use application unit system
Update google travel time to use application unit system
Update configuration example
Update dht sensor
Update DHT temperature conversion to use the utility function
Update swagger config
Update my sensors metric flag
Update hvac component temperature conversion
HVAC conversion for temperature
Pull unit from sensor type map
Pull unit from sensor type map
Update the temper sensor unit
Update yWeather sensor unit
Update hvac demo unit test
Set unit test config unit system to metric
Use hass unit system length for default in proximity
Use the name of the system instead of temperature
Use constants from const
Unused import
Forecasted temperature
Fix calculation in case furthest distance is greater than 1000000 units
Remove unneeded constants
Set default length to km or miles
Use constants
Linting doesn't like importing just for typing
Fix reference
Test is expecting meters - set config to meters
Use constant
Use constant
PyDoc for unit test
Should be not in
Rename to units
Change unit system to be an object - not a dictionary
Return tuple in conversion
Move convert to temperature util
Temperature conversion is now in unit system
Update imports
Rename to units
Units is now an object
Use temperature util conversion
Unit system is now an object
Validate and convert unit system config
Return the scalar value in template distance
Test is expecting meters
Update unit tests around unit system
Distance util returns tuple
Fix location info test
Set units
Update unit tests
Convert distance
DOH
Pull out the scalar from the vector
Linting
I really hate python linting
Linting again
BLARG
Unit test documentation
Unit test around is metric flag
Break ternary statement into if/else blocks
Don't use dictionary - use members
is metric flag
Rename constants
Use is metric flag
Move constants to CONST file
Move to const file
Raise error if unit is not expected
Typing
No need to return unit since only performing conversion if it can work
Use constants
Line wrapping
Raise error if invalid value
Remove subscripts from conversion as they are no longer returned as tuples
No longer tuples
No longer tuples
Check for numeric type
Fix string format to use correct variable
Typing
Assert errors raised
Remove subscript
Only convert temperature if we know the unit
If no unit of measurement set - default to HASS config
Convert only if we know the unit
Remove subscription
Fix not in clause
Linting fixes
Wants a boolean
Clearer if-block
Check if the key is in the config first
Missed a couple expecting tuples
Backwards compatibility
No like-y ternary!
Error handling around state setting
Pretty unit system configuration validation
More tuple crap
Use is metric flag
Error handling around min/max temp
Explode if no unit
Pull unit from config
Celsius has a decimal
Unused import
Check if it's a temperature before we try to convert it to a temperature
Linting says too many statements - combine lat/long in a fairly reasonable manner
Backwards compatibility unit test
Better doc
This commit adds a new config option to the heat_control thermostat
component, min_cycle_duration. Some heaters and/or ACs don't like
being constantly cycled on and off. Prior to this patch the
heat_control component can end up cycling the switch quite
frequently. (depending on how quickly the temperature changes) The
new option added is used for setting a minimum duration that must
have elapsed in either the on or off state before the thermostat will
send the service call to cycle the switch. This should enable users to
hand tune how frequently heat_control can switch the device on or off
to best suit the device being used.
This commit adds a new option to the heat_control component, ac_mode.
When set to true, this treats the toggle device as a cooler instead
of a heater. The concept being if you have a window or in-wall ac
unit that doesn't have a built-in thermostat having the home assistant
implemented thermostat would be as useful as for space heaters.
Instead of always assuming we want to change the heat, instead use the
setback attribute which sets heat / cool setback based on current HVAC
mode. This means that the proliphix thermostat will do sensible things
during cooling season.
* Added mired and kelvin mode to flux
* changed as requested
* Renamed varible
* attempt to add test for new method in flux.py
* removed line to fix lint error
* Allow multiple proximities
* Distance conversion
* Add unit of measurement and conversion to proximity
* Shorten attribute name
* Fix get unit of measurement
* Fix the km <-> m conversion
* Add type check and errors
* first path unit test around distance utility
* Fix numeric type check
* Fix conversion type-os
* Actually set the exception thrown flag
* Test for exact conversion
* More descriptive variable names
* Update method invocation to match change in method name
* Missed a couple variables
* Line continuation
* Fix linting too many return issue
* Break out proximity setup for list of proximity and for single proximity device
* Pass hass to setup function
* Check if setup succeeded for each proximity component
* Change variable name
* Break out branches in convert to avoid too many branches linting error
* Remove disable lint line
* Variables for default properties
* Combine logic
* Test loading multiple proximities for 100% code coverage on proximity component
* Unit test to reach 100%
Fail to configure proximities missing devices
* Fail first before processing
* Combine return statements
* lstrip = bad Teagan
* Utilize string formating instead of concatenation
* Fix variable reference
* Typeo
* Clean up conversion to reduce complexity
* Update unit tests to match code changes on distance util
* Test non numeric value
* Private methods, value type has already been checked.
I don't know if this is the right place for this, but I'm tired of having to install mysqlclient or psycopg2 after every docker update if I want to use mysql of postgres.
* Add group state for locks
Added ", (STATE_LOCKED, STATE_UNLOCKED)" to _GROUP_TYPES
Don't have a working HA right now, so can't test..
* Modified from homeassistant.const import
* Removed white space
* Line length change
* Removed white space.. again!
* Initial media_player component for the MPC-HC web API.
* Update .coveragerc to exclude the MPC-HC media player component.
* We don't need a session for every HTTP fetch.
* Use host in configuration YAML to match Kodi component.
* Fix PyLint errors.
* Fix PEP8 errors and use more idiomatic Python to get dict() values.
* Add MPC-HC remote command capabilities for basic control.
* Hyperion lets you turn it on and off
* Update hyperion to use recent API functions
The plugin now gets the active color from the server.
Add a configuration option "default_color" to customize the turn_on color.
* Use local timezone for log and history dates
* home-assistant-js fix
* Submodule updates not included so travis can build
* Separate Date and DateTime http validators
* Include submodule reference
* Update frontend
* slugify() for dev_id (fixes#2162) [Keep space replacement to not impact known_devices.yaml]
* pyicloud upgrade 0.9.1
* config validation
* Only poll icloud every 4 minutes...
* Immediately pull device state on HASS start
* Added new test with icloud char e' acute [chr(233)]
* Suppress pyicloud logging
* Make sure values are updated regardles of manual or frontend update,
* Devices with set_switch command was not happy with fast updating.
* Binary triggersensors command was not happy with refreshed updating.
Fixes#2611
Adds a timeout kwarg to call_service and API.__call__ with default set
to 5 (as per previous behavior). Will not change existing behavior but
will allow remote Python API calls to specify a longer (or shorter)
timeout if they know that a script takes longer than 5 seconds to
return.
* Major rewrite of the KNX multi address device. This class wasn't used before, but the new class will be the base for the LNX thermostat module
* newer KNXIP version needed as the previous version had a serious bug
* Update knxip to later version
* Added thermostat module
* First implementation of a KNX thermostat module
* Minor cleanup
* Removed unsed code
* Update recorder.
models.py:
- Use scoped_session in models.py to fix shutdown error
__init__.py:
- Session _commit & retry method
- Single session var for purge_data
- Ensure single _INSTANCE
- repeat purge every 2 days
- show correct time in log_error
* _commit
* Restore models to old functionality, swap purge, remove _INSTANCE cleanup from tests, typing ignore Base class
* pylint
* Remove recorder from model unit test
* Fix deprecated(moved) import
* Add util/dt typing
* Green on mypy util/dt
* Fix some errors
* First part of yping util/yaml
* Add more typing to util/yaml
* Add __main__ type hints
* Fix most errors of __main__
* Add ignore for script.run()
* Add type annotations for from_config_dict and from_config_file
* Fix errors
* Fix requirement error
* Add mypy type check to tests
* Enable travis typing check
* Messed up the tox deps
* Laxer type checker
* Add power attribute to switch.
* Move device_state_attributes into base class.
* Fix imports following refactor.
* Bump pyvera version - should add contributed support for older (UI5) version dimmers and locks.
* Refactor device lookup to be based on vera classes, push category back into library.
* Add generic power attribute, fix inherited class order bug.
* Tidy.
* add media_player/clear_playlist and line-in/tv support to sonos
* add support source radio
* fix bug
* print TV/Line-In as media_title
* implement universal player
* add to demo platform
* Update demo.py
Better handling for demo object
* add unit tests
* fix unit test
* Allow owntracks entity for google travel times
* Added ability to use sensor state as location
* Added zone checks for google travel timesg
* Updated to use global constents and the location helper
* Fixed type in method name and removed redundant validation
* Changed domain condition to be a bit more elegant
* Updated to allow friendly name in any instance including the config
* Fixed bad python syntax and used helper methods
* add hvac mode support to radiotherm
off/cool/heat/auto modes are supported
* Moved STATE_AUTO to thermostat component, fix lint
Moved STATE_AUTO to thermostat platform. Fixed lint error.
* initial support for Join notifier
add more functions for Join
* rename to joaoapps_join
add message default in schema
move api_key check
* move special join services to their own component
update coveragerc and requirements_all
add icon and smallicon
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Revert "Clamp brightness between 0 and 255"
This reverts commit c87238e8b5.
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Imap unread email sensor
Checks the inbox of a imap account for unread emails. Tested against
gmail.
Example config:
```
sensor:
- platform: imap
name: gmail test
user: USER
password: PASSWORD
server: imap.gmail.com
port: 993
```
* added to .coveragerc
* Code cleanup and typo fix.
* Added port range validation
* Fix lint errors
* Implementation of a KNX platform driver and a KNX switch
* Starting working on a KNX thermostat implementation
* Removed KNX thermostat implementation from this branch again
* Make gateway parameter optional (can be auto-detected in many cases)
* Removed check for double initialisation
* KNX messages now will be handled internally and not send to the Home Assistant message bus
* Call update_ha_state only if should_poll is false
* Removed unused HASS variable
* knxip library version changed
* pylint optimization
* New Switch Platform: TPLink Switch (HS100 / HS110)
### Information
The TPLink switch platform allows you to control the state of your TPLink Wi-Fi Smart Plugs.
Supported devices (tested):
HS100 (UK)
It should also work with the HS110.
To use your D-Link smart plugs in your installation, add the following to your configuration.yaml file:
"""
# Example configuration.yaml entry
switch:
platform: tplink
host: IP_ADRRESS
name: TPLink Switch
"""
### Configuration variables:
host (Required): The IP address of your TPlink plug, eg. http://192.168.1.105
name (Optional): The name to use when displaying this switch.
* Update tplink.py
Bug fixes
* Separate to a standalone library
* Removed unnecessary imports
* Code cleanup and update reference library link
* TPLink switch support (#2453)
* updated requirements
* Update unifi.py
Add support for a site that is not the default within the Unifi Controller.
i.e. A controller with multiple sites:
- Home
- Friends
- Parents (default)
Supplying the identifier for 'Home' now means that the devices tracked will be associated with 'Home'.
* Update test_unifi.py
Fix test modules as well.
* Switch to SQLAlchemy for the Recorder component. Gives the ability to use MySQL or other.
* fixes for failed lint
* add conversion script
* code review fixes and refactor to use to_native() model methods and execute() helper
* move script to homeassistant.scripts module
* style fixes my tox lint/flake8 missed
* move exclusion up
Default behavior for warm/cold white channels is to assume the white
channel is mixed with the rgb. This is a sane default and should support
the Fibaro RGBW LED controller.
* Replace switch with lock
* Update docstrings
* Add link to docs
* Add link to docs and update docstrings
* Update docstring
* Update docstrings and fix typos
* Add link to docs
* Add link to docs
* Add link to docs and update docstrings
* Fix link to docs and update docstrings
* Remove blank line
* Add link to docs
* Support more types of 1wire sensors and bus masters
- Added support for DS18S20, DS1822, DS1825 and DS28EA00 temperature sensors
- Added support for bus masters which use fuse to mount device tree.
Mount can be specified by 'mount_dir' configuration parameter.
* Correct the lint problem
* Stick version numbers
* Move elevation to core config
* Migrate forecast test to requests-mock
* Migrate YR tests to requests-mock
* Add requests_mock to requirements_test.txt
* Move conf code from bootstrap to config
* More config fixes
* Fix some more issues
* Add test for set config and failing auto detect
* Depreciate ssl2/3
Following the best practices as defind here:
https://mozilla.github.io/server-side-tls/ssl-config-generator/
* Updated comment with better decription
Links to the rational rather than the config generator; explains link.
* add comment mentioning intermediate
* Fix move_up and move_down
I managed to switch up the zwave move_up and move_down commands.
This PR fixes it.
Thank you @nunofgs for bringing this to my attention :)
* Fix for aeotec 6 multisensor
This commit fixes an issue with the use of None in default values
for the config get() calls in __init__() of AsusWrtDeviceScanner.
These values are cast as strings and when a NoneType is cast it
returns the string "None" this broke the check for the existence
of these fields. This commit fixes the issue by changing the default
value to be an empty string '' which will conform with the behavior
expected by the ssh login code.
Closes#2343
* Add support for wind, battery, radio signals
* Fix indentation error
* second indentation fix
* Fix for pylint too many statements error
* Moving "pylint: disable=too-many-statements"
* Added Sony Bravia support to HA
* Improvements to make it work on my poor raspberry 1
* Just a typo
* A few fixes in order to pass pylint
* - Remove noqa: was due to the 80 characters max per line restriction
- Move communication logic to a separate library at https://github.com/aparraga/braviarc.git
- Added dependency and adapt the code according to that
* A few improvements
* Just a typo in a comment
* Rebase from HM/dev
* Update requirements by executing the script/gen_requirements_all.py
* More isolation level for braviarc lib
* Remove unnecessary StringIO usage
* Revert submodule polymer commit
* Small refactorization and clean up of unused functions
* Executed script/gen_requirements_all.py
* Added a missing condition to ensure that a map is not null
* Fix missing parameter detected by pylint
* A few improvements, also added an empty line to avoid the lint error
* A typo
* Basic implementation of Zwave Rollershutters
* Better filtering, by @wokar
* Fix typo
* Remove polling from component, and loop fix
* linter fix
* Filter to channel devices to correct component
* Remove overwriting of parent node name
* Created a new platform for envisalink-based alarm panels (Honeywell/DSC)
* Added a sensor component and cleanup
* Completed initial development.
* Fixing pylint issues.
* Fix more pylint issues
* Fixed more validation issues.
* Final pylint issues
* Final tweaks prior to PR.
* Fixed final pylint issue
* Resolved a few minor issues, and used volumptous for validation.
* Fixing final lint issues
* Fixes to validation schema and refactoring.
* Added template rendering to `shell_command` component
* Security upgrades to template rendering in shell_command.
* Added new unit tests for shell_command templates.
Better failure when template is invalid in shell_command
add option to name in config
fix const import
use plexapi
add myplex support for remote access
use first server if server not specified
use list comprehension
use dictionary comprehension
* Pandora cleanups and enhancements
Added media_content_type
reduced debug messages
made more robust station list
Eliminated auto-pause detection issue
* Added proper de-init of LIRC
* Now won't re-spawn Pandora client if turn_on command is sent twice
* Update frontend
Conflicts:
homeassistant/components/frontend/version.py
homeassistant/components/frontend/www_static/core.js.gz
homeassistant/components/frontend/www_static/frontend.html
homeassistant/components/frontend/www_static/frontend.html.gz
homeassistant/components/frontend/www_static/home-assistant-polymer
homeassistant/components/frontend/www_static/service_worker.js
homeassistant/components/frontend/www_static/service_worker.js.gz
* Add a default OPTIONS handler for wsgi (#2301)
When a browser makes a CORS request, it often makes a 'preflight'
options request in order to make sure the resource is valid, and that
it has the right CORS access. This adds a default OPTIONS handler for
all views. If a view needs to customize the OPTIONS handler for some
reason, it's free to, but this way CORS will work.
* Version bump to 0.21.2
When a browser makes a CORS request, it often makes a 'preflight'
options request in order to make sure the resource is valid, and that
it has the right CORS access. This adds a default OPTIONS handler for
all views. If a view needs to customize the OPTIONS handler for some
reason, it's free to, but this way CORS will work.
* Refactor Forecast.io
* Some more refactoring and code review workoff
* Dict switch refactor
* CamelCase for data lookup
* Fixing unit_of_measure update
* Better default return for unit_of_measurement
* Test fix
* Added Pandora media player utilizing the Pianobar client
* Added Pandora to .coveragerc ignore
* Fixes some docstring formats in Pandora
* More minor formatting tweaks for Pandora
* Eliminated non-portable assumption from Pandora component
* Updated Pandora to properly update currently-playing song.
* Docstring fixes in Pandora
* Added check to ensure Pianobar client is available in path for Pandora.
* Made Pandora client verification a function instead of method.
* Better handling of dependency verification in Pandora.
* Add mysensors IR switch device and service
* Add MySensorsIRSwitch as child class to MySensorsSwitch.
* Add platform specific service mysensors_send_ir_code. Only call
device method in service function if device is IR device.
* Add service and required attribute to state helper to support scenes.
* Move V_IR_SEND type from sensor.mysensors to switch.mysensors
platform.
* Populate switch.services.yaml with service descriptions.
* Fix check of entity_id in service function
Since multiple entity_ids can be passed as service data, and the
entity_id service attribute is forced to a list by the service
validation schema, the check in the service function should iterate
over any entity ids.
Previously experienced issues on routes where services operate in both
directions. The query picked up not just paths where service goes
from Origin -> Destination, but trips going Destination -> Origin,
and shown bogus results.
Ensure that this doesn't happen by requiring the origin station's
stop_sequence value to be lower than the destination station.
* WSGI based request handler
with a bit of polishing
Signed-off-by: eagleamon <joseph.piron@gmail.com>
* removed stale comment and fixed version, but failed tests do not seem to be related
* removing the wrapper hack
* added in requirements file
* Found the caved in lint error..
* Add a swagger.yaml file
@balloob
I created a swagger configuration file that will help people create clients (apps / frontends) for Home Assistant more easily. Based upon this code it is even possible to generate client code for several programming languages.
I created it by hand now, so when the API changes it will need to be updated. That's why it would be better to generate this specification automatically. This is possible for API frameworks but I don't know whether it is possible for the handwritten endpoints in Home Assistant. Maybe you could assist here?
This documentation could be used to replace a part of https://home-assistant.io/developers/rest_api/.
* Added restrict parameter
* Moved swagger file to docs folder
* Introducing the Netatmo component
As Netatmo is providing several type of device (sensor, camera), a new Netatmo
component needs to be created in order to centralize the Netatmo login data.
Currently this change only impacts the Netatmo Weather station
* Add new Netatmo library
This new API will provide access to the Welcome Camera
* Basic support for Netatmo Welcome camera
This change introduces support for Netatmo Welcome camera. Currently, it will
add all detected camera to Home Assistant, camera filtering (similar to the one
used for weather station modules) will be added later
* Remove useless REQUIREMENTS
* Fixes for Netatmo Welcome support
* Allow to filter Welcome cameras by name and/or home
* Update requirements for Netatmo components
* Fix multi-camera support for Welcome
* Fix pep8 error/warning
* This commit also adds improved logging for bad credentials
* Add Throttle decorator for Welcome update function
As the update function updates the data for all cameras, we should prevent this
function to be called several time during an interval
Previously experienced issues on routes where services operate in both
directions. The query picked up not just paths where service goes
from Origin -> Destination, but trips going Destination -> Origin,
and shown bogus results.
Ensure that this doesn't happen by requiring the origin station's
stop_sequence value to be lower than the destination station.
* Removed webcolors dependency in favor of dictionary lookup.
* Fixed code style errors.
* Moved color dictionary to module per suggestion.
* Removed try/except per suggestion.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#
**Pull request in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io) with documentation (if applicable):** home-assistant/home-assistant.github.io#<home-assistant.github.io PR number goes here>
**Example entry for `configuration.yaml` (if applicable):**
```yaml
@@ -13,9 +13,9 @@
**Checklist:**
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
- [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
If code communicates with devices:
If the code communicates with devices, web services, or third-party tools:
- [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
@@ -26,8 +26,5 @@ If the code does not interact with devices:
- [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
- [ ] Tests have been added to verify that the new code works.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
Still interested? Then you should read the next sections and get more details.
Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details.
## Adding support for a new device
For help on building your component, please see the [developer documentation](https://home-assistant.io/developers/) on [home-assistant.io](https://home-assistant.io/).
After you finish adding support for your device:
- Check that all dependencies are included via the `REQUIREMENTS` variable in your platform/component and only imported inside functions that use them.
- Add any new dependencies to `requirements_all.txt` if needed. Use `script/gen_requirements_all.py`.
- Update the `.coveragerc` file to exclude your platform if there are no tests available or your new code uses a 3rd party library for communication with the device/service/sensor.
- Provide some documentation for [home-assistant.io](https://home-assistant.io/). It's OK to just add a docstring with configuration details (sample entry for `configuration.yaml` file and alike) to the file header as a start. Visit the [website documentation](https://home-assistant.io/developers/website/) for further information on contributing to [home-assistant.io](https://github.com/home-assistant/home-assistant.io).
- Make sure all your code passes ``pylint`` and ``flake8`` (PEP8 and some more) validation. To check your repository, run `tox` or `script/lint`.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
- Check for comments and suggestions on your Pull Request and keep an eye on the [CI output](https://travis-ci.org/home-assistant/home-assistant/).
If you add a platform for an existing component, there is usually no need for updating the frontend. Only if you've added a new component that should show up in the frontend, there are more steps needed:
- Update the file [`home-assistant-icons.html`](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/components/frontend/www_static/polymer/resources/home-assistant-icons.html) with an icon for your domain ([pick one from this list](https://www.polymer-project.org/1.0/components/core-elements/demo.html#core-icon)).
- Update the demo component with two states that it provides.
- Add your component to `home-assistant.conf.example`.
Since you've updated `home-assistant-icons.html`, you've made changes to the frontend:
- Run `script/build_frontend`. This will build a new version of the frontend. Make sure you add the changed files `frontend.py` and `frontend.html` to the commit.
### Setting states
It is the responsibility of the component to maintain the states of the devices in your domain. Each device should be a single state and, if possible, a group should be provided that tracks the combined state of the devices.
A state can have several attributes that will help the frontend in displaying your state:
-`friendly_name`: this name will be used as the name of the device
-`entity_picture`: this picture will be shown instead of the domain icon
-`unit_of_measurement`: this will be appended to the state in the interface
-`hidden`: This is a suggestion to the frontend on if the state should be hidden
These attributes are defined in [homeassistant.components](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/components/__init__.py#L25).
### Proper Visibility Handling
Generally, when creating a new entity for Home Assistant you will want it to be a class that inherits the [homeassistant.helpers.entity.Entity](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/helpers/entity.py) class. If this is done, visibility will be handled for you.
You can set a suggestion for your entity's visibility by setting the hidden property by doing something similar to the following.
```python
self.hidden=True
```
This will SUGGEST that the active frontend hides the entity. This requires that the active frontend support hidden cards (the default frontend does) and that the value of hidden be included in your attributes dictionary (see above). The Entity abstract class will take care of this for you.
Remember: The suggestion set by your component's code will always be overwritten by user settings in the configuration.yaml file. This is why you may set hidden to be False, but the property may remain True (or vice-versa).
### Working on the frontend
The frontend is composed of [Polymer](https://www.polymer-project.org) web-components and compiled into the file `frontend.html`. During development you do not want to work with the compiled version but with the seperate files. To have Home Assistant serve the seperate files, set `development=1` for the *http-component* in your config.
When you are done with development and ready to commit your changes, run `build_frontend`, set `development=0` in your config and validate that everything still works.
## Testing your code
To test your code before submission, used the `tox` tool.
```bash
> pip install -U tox
> tox
```
This will run unit tests against python 3.4 and 3.5 (if both are available locally), as well as run a set of tests which validate `pep8` and `pylint` style of the code.
You can optionally run tests on only one tox target using the `-e` option to select an environment.
For instance `tox -e lint` will run the linters only, `tox -e py34` will run unit tests only on python 3.4.
### Notes on PyLint and PEP8 validation
In case a PyLint warning cannot be avoided, add a comment to disable the PyLint check for that line. This can be done using the format `# pylint: disable=YOUR-ERROR-NAME`. Example of an unavoidable PyLint warning is if you do not use the passed in datetime if you're listening for time change.
description:Returns message if API is up and running.
tags:
- Core
security:
- api_key:[]
responses:
200:
description:API is up and running
schema:
$ref:'#/definitions/Message'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/config:
get:
summary:API alive message
description:Returns the current configuration as JSON.
tags:
- Core
security:
- api_key:[]
responses:
200:
description:Current configuration
schema:
$ref:'#/definitions/ApiConfig'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/discovery_info:
get:
summary:Basic information about Home Assistant instance
tags:
- Core
responses:
200:
description:Basic information
schema:
$ref:'#/definitions/DiscoveryInfo'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/bootstrap:
get:
summary:Returns all data needed to bootstrap Home Assistant.
tags:
- Core
security:
- api_key:[]
responses:
200:
description:Bootstrap information
schema:
$ref:'#/definitions/BootstrapInfo'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/events:
get:
summary:Array of event objects.
description:Returns an array of event objects. Each event object contain event name and listener count.
tags:
- Events
security:
- api_key:[]
responses:
200:
description:Events
schema:
type:array
items:
$ref:'#/definitions/Event'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/services:
get:
summary:Array of service objects.
description:Returns an array of service objects. Each object contains the domain and which services it contains.
tags:
- Services
security:
- api_key:[]
responses:
200:
description:Services
schema:
type:array
items:
$ref:'#/definitions/Service'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/history:
get:
summary:Array of state changes in the past.
description:Returns an array of state changes in the past. Each object contains further detail for the entities.
tags:
- State
security:
- api_key:[]
responses:
200:
description:State changes
schema:
type:array
items:
$ref:'#/definitions/History'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/states:
get:
summary:Array of state objects.
description:|
Returns an array of state objects. Each state has the following attributes: entity_id, state, last_changed and attributes.
tags:
- State
security:
- api_key:[]
responses:
200:
description:States
schema:
type:array
items:
$ref:'#/definitions/State'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/states/{entity_id}:
get:
summary:Specific state object.
description:|
Returns a state object for specified entity_id.
tags:
- State
security:
- api_key:[]
parameters:
- name:entity_id
in:path
description:entity_id of the entity to query
required:true
type:string
responses:
200:
description:State
schema:
$ref:'#/definitions/State'
404:
description:Not found
schema:
$ref:'#/definitions/Message'
default:
description:Error
schema:
$ref:'#/definitions/Message'
post:
description:|
Updates or creates the current state of an entity.
tags:
- State
consumes:
- application/json
parameters:
- name:entity_id
in:path
description:entity_id to set the state of
required:true
type:string
- $ref:'#/parameters/State'
responses:
200:
description:State of existing entity was set
schema:
$ref:'#/definitions/State'
201:
description:State of new entity was set
schema:
$ref:'#/definitions/State'
headers:
location:
type:string
description:location of the new entity
default:
description:Error
schema:
$ref:'#/definitions/Message'
/error_log:
get:
summary:Error log
description:|
Retrieve all errors logged during the current session of Home Assistant as a plaintext response.
tags:
- Core
security:
- api_key:[]
produces:
- text/plain
responses:
200:
description:Plain text error log
default:
description:Error
schema:
$ref:'#/definitions/Message'
/camera_proxy/camera.{entity_id}:
get:
summary:Camera image.
description:|
Returns the data (image) from the specified camera entity_id.
tags:
- Camera
security:
- api_key:[]
produces:
- image/jpeg
parameters:
- name:entity_id
in:path
description:entity_id of the camera to query
required:true
type:string
responses:
200:
description:Camera image
schema:
type:file
default:
description:Error
schema:
$ref:'#/definitions/Message'
/events/{event_type}:
post:
description:|
Fires an event with event_type
tags:
- Events
security:
- api_key:[]
consumes:
- application/json
parameters:
- name:event_type
in:path
description:event_type to fire event with
required:true
type:string
- $ref:'#/parameters/EventData'
responses:
200:
description:Response message
schema:
$ref:'#/definitions/Message'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/services/{domain}/{service}:
post:
description:|
Calls a service within a specific domain. Will return when the service has been executed or 10 seconds has past, whichever comes first.
tags:
- Services
security:
- api_key:[]
consumes:
- application/json
parameters:
- name:domain
in:path
description:domain of the service
required:true
type:string
- name:service
in:path
description:service to call
required:true
type:string
- $ref:'#/parameters/ServiceData'
responses:
200:
description:List of states that have changed while the service was being executed. The result will include any changed states that changed while the service was being executed, even if their change was the result of something else happening in the system.
schema:
type:array
items:
$ref:'#/definitions/State'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/template:
post:
description:|
Render a Home Assistant template.
tags:
- Template
security:
- api_key:[]
consumes:
- application/json
produces:
- text/plain
parameters:
- $ref:'#/parameters/Template'
responses:
200:
description:Returns the rendered template in plain text.
schema:
type:string
default:
description:Error
schema:
$ref:'#/definitions/Message'
/event_forwarding:
post:
description:|
Setup event forwarding to another Home Assistant instance.
tags:
- Core
security:
- api_key:[]
consumes:
- application/json
parameters:
- $ref:'#/parameters/EventForwarding'
responses:
200:
description:It will return a message if event forwarding was setup successful.
schema:
$ref:'#/definitions/Message'
default:
description:Error
schema:
$ref:'#/definitions/Message'
delete:
description:|
Cancel event forwarding to another Home Assistant instance.
tags:
- Core
consumes:
- application/json
parameters:
- $ref:'#/parameters/EventForwarding'
responses:
200:
description:It will return a message if event forwarding was cancelled successful.
schema:
$ref:'#/definitions/Message'
default:
description:Error
schema:
$ref:'#/definitions/Message'
/stream:
get:
summary:Server-sent events
description:The server-sent events feature is a one-way channel from your Home Assistant server to a client which is acting as a consumer.
tags:
- Core
- Events
security:
- api_key:[]
produces:
- text/event-stream
parameters:
- name:restrict
in:query
description:comma-separated list of event_types to filter
required:false
type:string
responses:
default:
description:Stream of events
schema:
type:object
x-events:
state_changed:
type:object
properties:
entity_id:
type:string
old_state:
$ref:'#/definitions/State'
new_state:
$ref:'#/definitions/State'
definitions:
ApiConfig:
type:object
properties:
components:
type:array
description:List of component types
items:
type:string
description:Component type
latitude:
type:number
format:float
description:Latitude of Home Assistant server
longitude:
type:number
format:float
description:Longitude of Home Assistant server
location_name:
type:string
unit_system:
type:object
properties:
length:
type:string
mass:
type:string
temperature:
type:string
volume:
type:string
time_zone:
type:string
version:
type:string
DiscoveryInfo:
type:object
properties:
base_url:
type:string
location_name:
type:string
requires_api_password:
type:boolean
version:
type:string
BootstrapInfo:
type:object
properties:
config:
$ref:'#/definitions/ApiConfig'
events:
type:array
items:
$ref:'#/definitions/Event'
services:
type:array
items:
$ref:'#/definitions/Service'
states:
type:array
items:
$ref:'#/definitions/State'
Event:
type:object
properties:
event:
type:string
listener_count:
type:integer
Service:
type:object
properties:
domain:
type:string
services:
type:object
additionalProperties:
$ref:'#/definitions/DomainService'
DomainService:
type:object
properties:
description:
type:string
fields:
type:object
description:Object with service fields that can be called
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
