* Make it available during state paused.
* Don't adjust for media_position_updated_at. I.e. do as vlc, sonos etc
so that returned position is the position at the time of
media_position_updated_at, not now.
* Make aiolifx modules easily available
* Use aiolifx features_map for deciding bulb features
Also move the feature detection out of Light so it is available even
during the initial detection.
* Move each LIFX light type to a separate class
* Simplify AwaitAioLIFX
This has become possible with recent aiolifx that calls the callback even
when a message is lost.
Now the wrapper can be used also before a Light is added though the register
callback then has to become a coroutine.
* Refactor send_color
* Add support for multizone
This lets lifx_set_state work on individual zones.
Also update to aiolifx_effects 0.1.1 that restores the state for individual
zones.
The default aiolifx timers are tuned for a network with few lost packets.
This means that lights can become "unavailable" from just a two second
dropout. An unavailable light is completely useless for HA until it is
rediscovered so this is an undesirable state to be in.
These tweaks make aiolifx try harder to get its messages through to the
bulbs, at the cost of some latency in detecting lights that actually are
unavailable.
* This change will enable the functionality for Arlo Q cameras. When we added the code to enable/disable motion detection, we assumed that base station will be present for all arlo type of cameras. But found recently that Arlo Q cameras does not have base station. So, removed the base_station dependency in the init code. Also added code in enable/disable motion detection code to first check if base station is detected by library. If base station is detected then it will use it to enable the motion detection. If not detected, even if service was called, it will not do anything. Enabling/disabling the motion detection for Arlo Q cameras have to added by someone who has that camera. I don't have the Arlo Q cameras.
* Fixed a typo in the code.
* Added support for temperature_offset and humidity_offset
Some DHT sensors require some offsets to work.
* Support for temperature and humidity offset
* Changed lines with 79 characters
* Moved const to dht.py from const.py
* Changed temperature_offset range
* Removed the const
const.py is at original state.
* Fixed continuation line under-indented
* Removed first round and added debug info
* Fix -1 value issue
Fixed issue where thermostat will sometimes return a current temperature or set temperature value of -1
* Update radiotherm.py
* Update radiotherm.py
* Update radiotherm.py
Added retry limit
* Update radiotherm.py
* Update radiotherm.py
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
bellows 0.3.0 changes the API to have both, renaming the attribute which used
to be for input clusters in the process.
This is in preparation for remotes.
* Allow notifications to include media, with Twitter as the first implementation. The Twitter notifier uses the Twitter-recommended async chunked media/upload approach and tries to convey the correct mime type of the media. Twitter implementation based on https://github.com/geduldig/TwitterAPI/blob/master/examples/upload_video.py.
* Changes based on balloob's review:
balloob: "Please remove this file. We fixed the issue in our tests that left this artifact."
balloob: "…prefer a guard clause"
balloob: "This is very inefficient. You are now generating up to 99 values."
balloob: "Since media_id is going to be None, why not just return None and you can remove the else."
* balloob: "Other notify platforms are using ATTR_DATA for it. That way if a platform requires extra metadata, we don't need to add extra fields. So please add it to Twitter via ATTR_DATA."
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* New component to connect to VELUX KLF 200 Interface
* Issue #8203: modifications as suggested by hound
* Issue #8203: added entries to .coveragerc
* moving velux/__init__p.y to velux.py
* Issue #8203: Using hass.data for storing global object, updated docstrings
* Issue #8203: validation of config, using standard approach for getting config values
* Issue #8203: Exception handling if connection to velux component fails
* Issue #8203: removed unused import
* Issue #8203: Some minor changes within docstrings
* Issue #8203: Some minor changes within docstrings
* Issue #8203: added dependency for pyvlx to requirements_all.txt
* Issue #8203: less broad exception
* Issue #8203: increased version
* Issue #8203: changed position of pyvlx within requirements_all.txt
* Issue #8203: bumped version of pyvlx to 0.1.3 (better handling of retries when token expires)
* reset pointer to home-assistant-polymer
* Issue #8203: modifications as suggested by fabaff
* hound *sigh*
* use upstream RachioPy, fix manual run switches
* Update requirements for PyPi version of rachiopy
* Use upstream RachioPy 0.1.2 (partial revert of 39c6484d89)
* Revert rachiopy downgrade
* First version of a LaMetrci platform with a Notify module
* Cleanup, fix formatting bugs
* More formatting
* Formatting
* Updated requirements
* formatting
* Formatting
* More formatting
* Dummy commit for new Travis CI run
* Refactoring class methods to instance methods
* Cleanup unused classed
* Removed Eddystone_weatherurl that had nothing to do with this component
* Cleanup class methods
* Cleanup requirements
* Removed broad excepts
Removed storage of LaMetric devices
* Removed unused import
* Use user-set device names for Linksys Smart Wi-Fi routers (3)
* Newline at end of linksys_smart.py
* Remove spaces in last line of linksys_smart.py
* Update linksys_smart.py
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* UPnP mapping overlap
Addressing: https://community.home-assistant.io/t/upnp-new-module/20839
* removed whitespaces
Some devices don't seem to return the information properly when asked for
multiple attributes in one read. This separates out the reads if it didn't
work as expected the first time.
Because this data is cached in bellows, I don't expect any extra reads in
the "happy" case.
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Fix pylint issue (#8325)
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* Update snips.py
* Get the list of wireless interfaces from nvram so tri-band routers
work
* ARP checks don't work reliably for ap mode so remove it, associated
list seems pretty solid
* Match on 'mac' instead of 'ip' since we can't use it for ap mode
* The `client_info_tmp` nvram reference, Asus removed it some time ago
* Update AsusWrtResult
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Fix checking result from a modbus transaction
* Add missing decorator
* Added modbus write coil service and added descriptions
* Removed a hiding debug print
* Add address-specific KNX listeners that fire events on the HASS bus
* Added docstring
1-byte messages will be converted from a list to the value
* Formating
* Try catch around database updates in recorder. Resolves 6919
* Fixing failed test for line length
* Catch only OperationalError and retry connections before giving up
* Including alchemy exceptions in single function
This applies what was the intended fix in #8336.
moves the fallback for setting client_id to the case when no mqtt config was provided at all. This should reflect the most common use case that fails.
This commit is a workaround and should be reverted when hbmqtt is fixed to allow empty client_id again.
* Initial commit - new CityBikes platform
* Several syntax fixes.
* Added imperial unit support.
* Added station list lenght validation.
* Style fixes.
* Updated requirements.
* Updated .coveragerc.
* Fixed style problems according to pylint output.
* Updated SCAN_INTERVAL value.
* Fixed station names.
Removed unnecessary calls to `slugify`.
Changed the base name to reflect the name of the bike sharing
network, instead of the more generic `citybikes`.
* Small style fix.
* Use async version of python-citybikes
* Made platform setup async.
* Made some more things async.
* Switched to constants.
* WIP: different approach to async.
* Removed python-citybikes depnedency to fix async issues.
* Removed unnecessary hidden property.
* Style fixes.
* Retry network detection.
* Style fixes, and base name usage.
* Fixes according to comments.
* Use cv.latitude instead of coercing to float.
* Updated requirements.
* Several fixes and improvements.
* Started using PlatformNotReady exception.
* Cached the networks list result to avoid unnecessary API requests.
* Switched the asyncio.timeout to use a constant.
* Refactored CityBikes API requests into a separate function
* Fixed linting errors.
* Removed unnecessary requirement.
* Lift Apple TV to pyatv 0.3.2
Update code to use basic new features.
* Support button presses in Apple TV
* Support device authentication
* Convert Apple TV to a component
A media_player platform and a remote platform will be loaded for each
manually configured or discovered device.
* Move device auth to apple_tv component
* Update requirements and coverage config
* Add scan support to apple_tv
* Remove the need to login on the UPC Connect component
* Remove unnecessary imports
* Update the unit tests for the UPC Connect component
* Fix the "302" error with the UPC Connect component
* Fix a flake8 error
* Update the unit tests for the UPC Connect component
The upstream Avion and Decora code has changed to punt retry logic out to
consumers, so update to match. As a bonus, Avion also gains support for
pulling switch configuration off the web rather than requiring manual
configuration.
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Add tube_state
Add tube_state sensor
* Final cleanup
* Make corrections
Correct PLATFORM_SCHEMA
* Fix space
* Make test pass
* Correct format of test
Test still failing, don’t understand why
* correct description
* Make test pass
Preferred method below returns None
state = self.hass.states.get('sensor.london_overground')
* Format for hound
* indent
* Make requested changes to test, not working
Test fails with:
AssertionError: assert 0 > 0
where 0 = len([])
Surely I need tube_state.setup_platform ?
* Fixed test
Config was wrong
* Change component name to london_tube
* Update name to london_underground
Make consistent
* cleanup
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Implement templates for covers
* Fix a few remaining pylint warnings
* Fix hound line-length warnings
* Fix one more hound line-length warning
* Fix quadruple-quotes an line length code-quality issues
* Irrelevant change to retrigger travis due to timeout
* Use volutuous Exclusive to check for mutex condition
* Fix incorrect state check
* Comfoconnect fan component.
* Fix linter. Don't store hass object when not needed.
* More code style.
* Rebase to dev and add to coverage ignore list.
* Use published package from pypi.
* Added invert flag for position for actuators that uses 100% for fully closed position
* Implementation of tilt functionality
* Bugfix check tilt
* Formatting
* Formatting fixes
* Formatting
* Bugfix set_tilt
* Minor modifications in configuration section
* Formatting
* Update knx.py
* add percentage (DPT_Scaling) KNX sensors
1. moved basic functionality to KNXSensorBaseClass instead of
KNXSensorFloatClass
2. added "if" clause in setup for a "percentage" sensor type and added KNXSensorDPTScalingClass
* support-knx-percentage-sensor: lint correction
Updated convert method base sensor class to avoid lint warning
(R201 - Method could be a function)
* added PLATFORM_SCHEMA for configuration
1. added SCHEMA extension for defined keywords
2. moved fixed data for internal settings out of sensor logic
3. moved everything into standard KNXSensor object
4. added parsing of extra config parameters in __init__
* correct lint errors on support-knx-percentage-sensor
* Fixed mqtt subscription filter on sys $ topics
* fixed linting issue
* added unit tests for $ topics and changed fix to use re.escape
* merge upstream/dev mqtt unit tests
* Update test_init.py
* LIFX: Move light effects to external library
This moves the LIFX light effects to the external library aiolifx_effects.
To get the light state synchronized between that library and HA, the LIFX
platform no longer maintains the light state itself. Instead, it uses the
cached state that aiolifx maintains.
The reorganization also includes the addition of a cleanup handler.
* Fix style
* Fix Plex component to use port number in discovery.
* Break line
* Correctly save port to config
* Handle port with fewer code changes
* This is stuck configuring and I'm not sure why
* Changes suggested by @dale3h
* Open Hardware Monitor sensor
Platform which is able to connect to the JSON API of Open Hardware Monitor and adds sensors for the devices.
* Remove copyright in header, not needed.
* - Removed old code
- Fixed typo’s in comments
- Removed log spamming
- Removed code that was unnecessary
- Use requests instead of urllib
- Moved sensor update functionality to data handler, to remove unwanted constructor parameters
* Fixed typo in comment
Added tests
* Added default fixture, to stabilize tests
* - Fix for values deeper than 4 levels, no longer relies on fixed level
- Fixed tests
* Removed timer in preference of helper methods
* Moved update functionality back to Entity….
Updated SCAN INTERVAL
* Added timeout to request
Removed retry when Open Hardware Monitor API is not reachable
Fixed naming of sensors
Flow optimalisations
Fixed tests to use states
* Remove unused import
* Initial commit for an Axis service to do Vapix calls to device
* Added check to see if metadatastream initiated properly
* Make sure to configure the correct IP address when setting up registered devices on system start
* Manage reconnection when device is discovered with a different IP
* Cleaned up setting new IP
* Better naming of event for new IP
* New version of dependency axis
* Fix flake8 failing
* Break out service default strings to constants
* Use the dispatcher and not the core event bus for internal communication
In trying to come up for some reason behind issue #6365 (which only
happens on some platforms) the best guess is that some components are
managing to get a string value all the way up to the Polymer UI for
temperature, which then an increment of +0.5 is treating as a string
concat operation instead of addition. So 20 + 0.5 becomes 200.5 hits
the max thermostat value.
This will throw an exception if the climate temp value isn't a
number. That's going to turn a soft fail into a hard fail on
potentially a number of platforms. Mysensors is one of the platforms
that was reported as having the issue. So put some explicit float
casts where that might be coming from as well.
Model CT50 has an "Auto" mode. When mode is set to auto we need to ask
what the current state is: cool or heat. Then we can query the
appropriate target temperature.
Without this fix, the target temperature shows up blank in the UI and
setting the mode fails.
* Uninstall enum34 in python3.6 docker image
This is a short term fix for #7733
What's happening is the following dependencies are pulling enum34:
- pygatt
- libsoundtouch
- yeelight
However, enum34 is not meant to be installed in Python versions 3.4+
and causing the `AttributeError: module 'enum' has no attribute 'IntFlag'``
I've submitted patches to these projects so we don't have to do this
manual uninstall in the future.
* Update Dockerfile
* Add ClickSend notify service.
* PR #8135 changes.
- Some code spacing fixes.
- Add timeout to requests.
- Change doc url.
- Use const.py as much as possible.
- Check credentials to determine if setup fails or not.
- Add docstrings.
- Use string formatting.
* PR #8135 changes.
- Remove unused variables.
- Continuation line under-indented for visual indent.
* PR #8135 changes.
- Format code based on PEP8.
* PR #8135 changes.
- Remove unused base64 dependency.
* PR #8135 changes.
- Fix: D205: 1 blank line required between summary line and description (found 0)
- Fix: standard import "import json" comes before "import requests"
* PR #8135 changes.
- Add files to .coveragerc
* Remove obvious comments and set constant
* added default parameter
* zone overlay can be set with or without a temperature and with or without a duration. Duration is not supported by hass
* Fixes issue #7059 with missing sensorDataPoints
* Fixes issue #6943 added ac_mode
* ac_mode cases
* added fan modes
* changed handling of device state OFF
* fixed an error initializing a dictionary (#6943)
* changed pytado version
* activated pytado debugging
* Changed pyTado version
* mytado.com changed authentication challenge
* Fixed linelength and whitespace issues
* requirements to pytado changed
When a openwrt router reboots, all the session ids gets invalidated.
In that case we need to log in again and get a new session id.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Added rfxtrx binary sensors to a new branch
* binary_sensor/rfxtrx: added support for automatic_add
* Fixed pylint warnings
* off_delay is set wit clearer time specifiers (cv.time_period)
* fire_event config attribute is now supported by rfxtrx binary sensors.
* Cosmetic ordering
* Fix lint errors for PR requirements.
* Fixed indents, line length and comment problems.
* Yet another line too long fix...
* Using existing attributes and config constants.
* Cosmetic fix (ATTR_DATABITS -> ATTR_DATA_BITS)
* Removed unused attribute
* FIX masked device id logging message
* FIX line too long
* FIX trailing white space
* FIX: rfxtrx binary_sensor manages its own devices only.
* Added a basic config helper for pt2262 devices
* Make pylint happy
* Fixed most houndci-bot-detected issues
* Fix TOX complaint about blank line after function docstring
* Fix data bit value calculation
* Fixed line too long
* Removed unnecessary code.
* remove trailing whitespace
* Added hass property to device object.
* Use netdisco to automatically discover harmony hubs.
* Allow some settings in configuration.yml to override even on discovered hubs.
* Global is not required as no assignment on variable
* Use `set` instead of list for perf
* Store cache of discovered devices against `hass.data` rather than in global
* Handle case if the device cache is empty
* Fix indentation issue
* Configurable fade-out behavior
Adds a per-group "fade" option with values of "out" (default) or "none".
By default, the lights are faded out when turned off, but this can cause usability issues when manually switching wall switches, since the bulbs turn back on at minimum brightness.
* Changed fade value from enum to boolean
* No need to fall back to default since voluptuous takes care of that.
* Update InfluxDB to handle datetime objects
Updates the InfluxDB regex to ignore datetime objects being coverted
into float values.
Adds tests to the component to ensure datetime objects are corectly
handled.
* Fix Hound errors
Fixes errors from Hound bot
* Update InfluxDB to handle multiple decimal points
Changes the way InfluxDB handles values such as 1.2.3.4 to be 1.234 so
it stores in InfluxDB as a valid float value
* Fix lint issues
Reduce the size of a line for the linter
* Update InfluxDB to pass on unknown variable
If we get an error trying to convert a variable to a float, let's ignore
it completely
* Make InfluxDB Regex constants
Makes the Regex's used by InfluxDB constants so they don't need to be
compiled each time
* cleanup
* fix lint
* Update regex
* fix tests
* Fix JSON body missing new line character
* fix exceptions
* Fix lights issue #8098
* Don't check self._color to decide whether to calll get_color()
self._color is None on init, so get_color() will never be called.
We only want to know which of the DHCP clients are indeed active.
For example: I've a table of static DHCP leases with most of the IPs of my network, so this module is always detecting them as present. With my patch only the active ones will be detected as present.
I already mentioned here: https://github.com/home-assistant/home-assistant/pull/7366#issuecomment-302950139
* Update InfluxDB to handle datetime objects
Updates the InfluxDB regex to ignore datetime objects being coverted
into float values.
Adds tests to the component to ensure datetime objects are corectly
handled.
* Fix Hound errors
Fixes errors from Hound bot
* Update InfluxDB to handle multiple decimal points
Changes the way InfluxDB handles values such as 1.2.3.4 to be 1.234 so
it stores in InfluxDB as a valid float value
* Fix lint issues
Reduce the size of a line for the linter
* Update InfluxDB to pass on unknown variable
If we get an error trying to convert a variable to a float, let's ignore
it completely
* Make InfluxDB Regex constants
Makes the Regex's used by InfluxDB constants so they don't need to be
compiled each time
* cleanup
* fix lint
* Update regex
* fix tests
* Fix JSON body missing new line character
* fix exceptions
* Fix lights issue #8098
* Don't check self._color to decide whether to calll get_color()
self._color is None on init, so get_color() will never be called.
* add knx cover
also corrected bugs in device config
1. overwriting of addresses in KNXMultiAddressDevice
2. setting and getting int values
3. added percentage scaling
* Update __init__.py
* Add support for Insteon FanLinc fan
* Upgrade insteonlocal dependency to 0.49
* Lint/flake fixes
* Remove configurator
* Make Hound fixes
* Revert "Make Hound fixes" and "Remove configurator"
This reverts commit 04d1f7fdb1.
This reverts commit 7b8278d7cf.
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* handle TransportError exceptions when calling JSONRPC API
* use double quotes for log messages; show TransportErrors as in async_ws_connect
* fix spaces around keyword / parameter
* fix logging message
* review changes
This will allow for dynamically updating weather states, for instance if
you wanted to use the latitude and longitude of a phone or other device
to get the weather for your current location.
Vera devices are reporting battery levels as a sting by appending a
percentage sign (%) on the end.
To make the Vera component act like other Home Assistant components,
let's remove the percentage sign from the battery report levels so that
we only display the battery level.
This may be a "breaking change" if people are relying on the Vera
battery levels to be a string instead of an int. However, this will make
the battery level reports compatible with everything else.
* Use standard entity_ids for zwave entities
* Include temporary opt-in for new entity ids
* Update link to blog post
* Update tests
* Add old entity_id as state attribute
* Expose ZWave value details
* Update tests
* Also show new_entity_id
* Just can't win with this one
* Use standard entity_ids for zwave entities
* Include temporary opt-in for new entity ids
* Update link to blog post
* Update tests
* Add old entity_id as state attribute
* Expose ZWave value details
* Update tests
* Also show new_entity_id
* Just can't win with this one
* Setup to send component data is option is enabled
* testcases, as well as moved to a single boolean, passed to the function
* fixed pep8 failures
* Clarify config option.
* Adding support for https.
This change allows to access a firetv-server instance that runs over https (via a reverse proxy for exemple).
Default stays http, but if `ssl: true` is set in the configuration the connection goes over https.
Successfully tested.
* respecting the 79 characters line limit
* Fixed the Wind sensor following new release of netatmo-api-python
The NetAtmo PR was at:
https://github.com/jabesq/netatmo-api-python/pull/5
Essentially, this commit adds a protection when adding an incorrect
monitored conditions to avoid to fail the entire NetAtmo component,
plus for consistency reasons all conditions are now in lower case.
* Fixes following the CI tests
* blink: the existing 50/50 flashing between base color and effect color
* breathe: a lifx_effect_breathe replacement
* ping: mostly base color with a short flash at the end of the cycle
* strobe: dark base color and short cycles by default
* solid: temporary color change, base color never visible
Adding a service call for each mode is a bit extravagant so instead
lifx_effect_breathe has been folded in as an option and that service
call is deprecated.
* Allow device tracker platforms to specify picture
* Allow device tracker to specify icon during discovery
* Clean up and add tests
* Fix lint
* Fix test
* Make percentage string values as floats in InfluxDB
Currently Z-wave and other compontents report an attributes battery
level as an integer, for example
```yaml
{
"is_awake": false,
"battery_level": 61,
}
```
However, some other components like Vera add the battery level as a
string
```yaml
{
"Vera Device Id": 25,
"device_armed": "False",
"battery_level": "63%",
"device_tripped": "False",
}
```
By removing any % signs in the field, this will send the value to
InfluxDB as an int, which can then be used to plot the data in graphs
correctly, like other percentage fields.
* Add tests and remove all trailing non digits
Adds tests and now removes all trailing non-numeric characters for
better use
* Update variable name for InfluxDB digit checks
Updates the variable used for the regex to remove trailing non digits
* Fix linting errors for InfluxDB component
Fixes a small linting error on the InfluxDB component
* dismiss service for persistent notifications
Unnecessary notifications can now be removed automatically. Added a
dismiss service to remove persistent notifications via script and/or
automation.
* removed unnecessary loop
loop removed
* Add color_util.color_hsv_to_RGB
* Use helper functions for LIFX conversions
The LIFX API uses 16 bits for saturation/brightness while HA uses 8 bits.
Using helper functions makes the conversion a bit nicer and less prone
to off-by-one issues.
The colorsys library uses 0.0-1.0 but we can avoid that by using the HA
color_util converters instead.
* initial commit
* class name and requirements_all.txt
* removed mentions of D7050
* changed default name
* catch oserror in update, travis errors.
* use nad_receiver pip version
* update coveragerc
* Add initial version
* Fix requirements
* Prefer logging over printing
* Set executor thread name on >Py36 only
* Add tests
* Lint
* Add restrictedpython to test dependencies
* Create python_script.py
From doc:
```
However, an empty dict ({}) is treated as is. If you want to specify a list that can contain anything, specify it as dict:
>>> schema = Schema({}, extra=ALLOW_EXTRA) # don't do this
>>> try:
... schema({'extra': 1})
... raise AssertionError('MultipleInvalid not raised')
... except MultipleInvalid as e:
... exc = e
>>> str(exc) == "not a valid value"
True
>>> schema({})
{}
>>> schema = Schema(dict) # do this instead
>>> schema({})
{}
>>> schema({'extra': 1})
{'extra': 1}
```
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112c.
* Revert "Give good example."
This reverts commit 4f90fc4be6.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187.
* Update pysesame requirement to 0.1.0 to support caching
* Set `available` property based on API enabled status
* Add state attributes for device ID and battery level
* osram lightify removed duplicated set in case of brightness changes
* lightify component: anticipate brightness evaluation to handle unconsidered scenario described in the PR request comments (light turned on with color/temperature)
* Correction for travis ci error:
undefined name 'transition'
SHOW DIAGNOSTICS always needs admin privileges on influxdb. For
the purposes of home-assistant this is too much.
Use 'SHOW SERIES' to have a relatively lightweight query which
only needs READ privileges.
* add option to display all sources / pushed to version 0.4.3 of library
* Add show_all_sources option for auto discovery too
* change code style for hass
* fix lint
* Add support for Vanderbilt SPC alarm panels.
* Arm/disarm + read state
* Autodiscover and add motion sensors
* Fix code formatting.
* Use asyncio.async for Python < 3.4.4.
* Fix for moved aiohttp exceptions.
* Add docstrings.
* Fix tests and add docstrings.
* Added buienradar sensor and weather
* used external library for parsing
* used external library for parsing
* updated buienradar lib to 0.4
* Make sure you import 3rd party libraries inside methods.
* Make sure you import 3rd party libraries inside methods.
* clean up code; optimized
* imports, sensor name and attributes
* updated requirements to match imports
* use asyncio for http get
* Add service to set nest away/home modes
* New service `nest.set_mode`
* Update the NestDevice object to export the local structures
* Validation and structure cleanup
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112c.
* Revert "Give good example."
This reverts commit 4f90fc4be6.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187.
* Added effects to Yeelight bulbs
* Fix Typo and Use randint instead of randrange
* Added Effects
* updated requirements_all.txt
* fix empty line
* minor fixes
* fix passing effects as parameter
* Fix#7758 subscription expiration/removal
Removes a subscription after receiving an HTTP 410 response when trying to send a new message.
* Fix tests failing due to additional call
* Fix code style
* Lint
* Check if media commands are actually applicable
- Explicitly allow ‘stop’ and ‘play’ on radio streams
- Disallow media commands when the playlist is empty
- Check if command is supported when calling `turn_on` and `turn_off`
* Suppress UPnP error 701 on media commands
* Clean up soco_filter_upnperror
Clean up soco_filter_upnperror and fix small bug in support_previous_track determination
* Start of migration framework, to allow moving of files in the config directory to be hidden, ios.conf used as the first one to undergo this change.
* Update const.py
* Update test_config.py
* improvement to syntax
* log time delay of domain setup in info level
* when setup problems appear, it's difficult to debug which are the components that took a lot to set up. This minimal change goes further than the 'slow setup warning' and measures the setup time interval for each domain.
* use timer as in helpers/entity
* Introduced support to Netgear Arlo Cameras
* Using async_setup_platform() and applied other changes
* Removed unecessary variables
* Using asyncio for sensor/arlo
* Update arlo.py
* Removed entity_namespace
Downgrades the Dockerfiles used by Home Assistant to Python 3.5, after
Python 3.6 base image was causing segmentation faults.
See home-assistant/home-assistant#7752
* Show persistent error if cover.myq fails
* Fixed typo on getLogger()
* Added ValueError on except condition
* Make pylint happy
* Removed DEFAULT_ENTITY_NAMESPACE since it is not being used
* Add `name` var to BytesIO content to get recognized
Sometimes the python-telegram-bot doesn't recognize the mimetype of the file and looks after a name variable to deduce it. Fixes#7413
* bytesio stream recycle less explicit
* Rachio platform started
* Rachio tests
* detect bad api token
* Documentation, Code cleanup
* Docstrings end with a period, log uses %
* Fix arguments, default run time is now 10 minutes
* Fix typo, remove todo (GH issue exists)
* Revert polymer submodule commit
* Use a RachioPy version with SSL cert validation
* Update requirements
* first commit
* first commit
* first commit
* first commit
* changing requirements
* updated requirements_all.txt
* various changes as suggested in the comments.
* using global values for dict keys.
* Remove setting up an hbmqtt broker
* Don't pass loop to web.Application in tests
* Use .query instead of deprecated .GET for aiohttp requests
* Fix closing file resource
* Do not use asyncio mark
* Notify.html5 - PyJWT: Use options to disable verify
* Yamaha: Test was still using deprecated ip
* Remove pytest-asyncio
* fix double template rendering when messages come from notify.telegram
* fix 'chat' information not present in callback queries
* better inline keyboards with yaml
To make a row of InlineKeyboardButtons you pass:
- a list of tuples like: `[(text_b1, data_callback_b1), (text_b2, data_callback_b2), ...]
- a string like: `/cmd1, /cmd2, /cmd3`
- or a string like: `text_b1:/cmd1, text_b2:/cmd2`
Example:
```yaml
data:
message: 'TV is off'
disable_notification: true
inline_keyboard:
- TV ON:/service_call switch.turn_on switch.tv, Other:/othercmd
- /help, /init
```
* fix send file to multiple targets
* fix message templating, multiple file targets, HA cameras
- Allow templating for caption, url, file, longitude and latitude fields
- Fix send a file to multiple targets
- Load data with some retrying for HA cameras, which return 500 one or two times sometimes (generic cams, always!).
- Doc in services for new inline keyboards yaml syntax: `Text button:/command`
* HttpDigest authentication as proposed in #7396
* review changes
- Don't use `file` as variable name.
- For loop
- Simplify filter allowed `chat_id`s.
* Don't use `file` as variable name!
* make params outside the while loop
* fix chat_id validation when editing sent messages
Using `python setup.py develop` did not manage to install the required dependencies.
This updates `script/setup` to use `pip install -e .` instead in order to resolve the required dependencies.
* starting light template component
* linting/flaking
* starting unit tests from copypasta
* working on unit testing
* forgot to commit the test
* wrapped up unit testing
* adding remote back
* updates post running tox
* Revert "adding remote back"
This reverts commit 852c87ff96.
* adding submodule back from origin
* updating submodule
* removing a line to commit
* re-adding line
* trying to update line endings
* trying to fix line endings
* trying a different approach
* making requested changes, need to fix tests
* flaking
* union rather than intersect; makes a big difference
* more tests passing, not sure why this one's failing
* got it working
* most of the requested changes
* hopefully done now
* sets; the more you know
* Added new commands and functionality to the harmony remote component.
-This includes the ability to optionally specify a number of times to repeat a specific command, such as pressing the volume button multiple times.
-Also added a new command that allows you to send multiple commands to the harmony at once, such as sending a set of channel numbers.
-Updated the unit tests for these changes.
* Fix flake8 coding violations
* Remove send_commands command and make send_command handle a single or list of commands
* Remove send_commands tests
* Update itach and kira remotes for new send_command structure. Fix pyharmony version in requirements_all.txt
* Fix incorrect variable name
* Fix a couple minor issues with remote tests
* Redesign monitored variables
Allow generating specific sensors without the need for template sensors
* Import 3rd party library inside update method
* Remove jsonpath_rw dependency
* Do not interfere with value_template or ilo_data output
Do not interfere with value_template or ilo_data output, this is now the responsibility of the user and should be handled in `configuration.yaml`
Fix UnusedImportStatement
Fix newline after function docstring
* Always output results to state
The product type is already established in order to decide the Kelvin range
so just reuse that information to disable color features for white-only lights.
Also change the breathe/pulse effects to be more useful for white-only
bulbs. For consistency, color bulbs set to a desaturated (i.e. white-ish)
color get the same default treatment as white-only bulbs.
* Make ssh and telnet connections continuous in asuswrt
* Refactored SSH and Telnet connections into respective classes.
* Fixed several copy-paste typos and errors.
* More typos fixed.
* Small changes to arguments, to pass automated tests.
* Removed unsupported named arguments.
* Fixed a couple of mistakes in Telnet, and other lint errors.
* Added Telnet tests, and added lint exceptions.
* Removed comments from tests, as they irritated the hound.
If OpenWRT isn't running the DHCP server then some OpenWRT hardware,
such as TP-Link TL-WDR3600 v1, can't determine the host
corresponding to an associated wifi client. This change handles that
by returning None when the request has no data in the result.
* bugfix for Telegram chat_ids
- Negative `chat_id`s for groups.
- Include `chat_id` in event data.
- Handle KeyError when receiving other types of messages, as `new_chat_member` ones, and send them as text.
* unused import
* fix double quote style, fix boolean expr, change warning msg
* mistake
* some more fixes
- fix if condition for msg bad fields.
- return True for a correct but not allowed or not recognized message: if not, the message arrives continuously.
- Allow to receive messages from unauthorized users if they come from authorized groups.
* support for `edited_message`s
- They come as normal messages, except for the 'edited_message' field instead of 'message'.
If OpenWRT isn't running the DHCP server then some OpenWRT hardware,
such as TP-Link TL-WDR3600 v1, can't determine the host
corresponding to an associated wifi client. This change handles that
by returning None when the request has no data in the result.
* bugfix for Telegram chat_ids
- Negative `chat_id`s for groups.
- Include `chat_id` in event data.
- Handle KeyError when receiving other types of messages, as `new_chat_member` ones, and send them as text.
* unused import
* fix double quote style, fix boolean expr, change warning msg
* mistake
* some more fixes
- fix if condition for msg bad fields.
- return True for a correct but not allowed or not recognized message: if not, the message arrives continuously.
- Allow to receive messages from unauthorized users if they come from authorized groups.
* support for `edited_message`s
- They come as normal messages, except for the 'edited_message' field instead of 'message'.
Prior to this change the zoneminder component was attempting to
use logging.exception outside of exception handling code. This
would lead to the traceback module throwing an exception when
trying to work out the traceback for the exception.
This fixes the issue by changing the exception call into a
plain error logging call.
* Implemented ffmpeg option on Amcrest camera and upgraded to version 1.2.0
* Added ffmpeg arguments and binary options to Amcrest camera
* Added ffmpeg as dependencies
* Makes lint happy and fixed requirements_all.txt
* Inherent the ffmpeg.binary configuration from ffmpeg component
* Update amcrest.py
* Ignore attribute changes in automation trigger from/to
* Quote names in deprecation warnings
This makes it somewhat easier to read if the suggestion happens to be
named "to".
* Add test with same state, new attribute value
* Remove global hass
* Http.auth test no longer spin up server
* Remove server usage from http.ban test
* Remove setupModule from test device_sun_light_trigger
* Update common.py
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* Modify set_config_parameter to accept setting string values
* descriptions
* Tweaks
* Tweaks
* Tweaks
* Tweaks
* lint
* Fallback if no config parameteres are available
* Update services.yaml
* review changes
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* Modify set_config_parameter to accept setting string values
* descriptions
* Tweaks
* Tweaks
* Tweaks
* Tweaks
* lint
* Fallback if no config parameteres are available
* Update services.yaml
* review changes
* Implemented ffmpeg option on Amcrest camera and upgraded to version 1.2.0
* Added ffmpeg arguments and binary options to Amcrest camera
* Added ffmpeg as dependencies
* Makes lint happy and fixed requirements_all.txt
* Inherent the ffmpeg.binary configuration from ffmpeg component
* Update amcrest.py
* Kodi specific services to call Kodi API methods
- new service: `kodi_execute_addon` to run a Kodi Addon with optional parameters. Results of the Kodi API call, if any, are redirected in a Home Assistant event: `kodi_execute_addon_result`.
- new service: `kodi_run_method` to run a Kodi JSONRPC API method with optional parameters. Results of the Kodi API call are redirected in a Home Assistant event: `kodi_run_method_result`.
- Add descriptions in services.yaml.
- Add `timeout` parameter to yaml config (needed to make slow queries to the JSONRPC API, default timeout is set to 5s).
- Trigger events with the results of the Kodi API calls, with:
```
event_data = {
'result': api_call_results,
'result_ok': boolean,
'input': api_call_parameters,
'entity_id': 'media_player.kodi'}
```
* no need to clean OrderedDicts; no need for the `kodi_execute_addon` service
* no need for the `kodi_execute_addon` service
* unused import
* naming changes
* Refactor color profiles to a class
* Refactor into preprocess_turn_on_alternatives
* LIFX: use light.preprocess_turn_on_alternatives
This avoids the color_name duplication and gains support for profile.
* Add kelvin parameter to light.turn_on
* Add brightness_pct parameter to light.turn_on
* LIFX: accept brightness_pct in effects
* Add test of kelvin/brightness_pct conversions
* Add sonos alarm clock update service
* Add tests and break lines
* Fix style errors
* Make test work with python<3.6
* Fix last two pylint errors
* fix new line to long errors
* SMTP notify enhancements: HTML emails and customization options
- Send full HTML emails, with or without inline attached images.
- Custom `timeout`.
- Custom `product_name` identifier for the `FROM` and `X-MAILER` email headers.
- New HTML email test
* `sender_name` instead of product_name
- Change `sender_name` instead of `product_name`.
- No changes in `X-Mailer` header.
- `From` header as always unless you define the new `sender_name` parameter.
* No longer require pyunify during tests
* No longer require cast during tests
* No longer required dependency for tests
* No longer require pymochad for tests
* Astral is a core dependency
* Avoid having to install datadog dependency during tests
* CMUS test doesn't test anything
* Frontier Silicon doesn't test anything
* No longer require mutagen
* Update requirements_test_all.txt
* Remove stale comment
* Fix Kodi specific services, add descriptions, add more handled exceptions
- Fixes issue #7528
- Add descriptions for Kodi specific services in services.yaml.
- Error handling in Kodi API errors.
- Make compatible the existent specific service `media_player.kodi_set_shuffle` with the general `media_player.shuffle_set` service (both use the same method but with different named parameter, I think the Kodi specific service should be eliminated, since it is not)
* fix line too long
* removed new services (for another PR); removed `kodi_set_shuffle` service
* requested changes
- Removed `kodi_set_shuffle` service.
- Optional `media_name` and `artist_name` parameters. `media_name` defaults to 'ALL'.
- Guard clause to check if the services are already registered.
Bumped blink version to support automatic reauthorization when tokens expire. Changed the battery sensor call to a string version so that the battery reports back "Low" or "OK" rather than a cryptic integer
* Initialize sun with unknown values.
Initial values should be `unknown` instead of `0`. Otherwise on HA restart the value of `0` is pushed to metrics databases (graphite/influx/recorder).
* Update sun position before emitting initial update
* Simplify based on armills comment.
* Use provided time for calculation.
* Added raspihats binary_sensor platform
* Updated .coveragerc to ommit raspihats platforms.
* Using vol.Coerce(int) for validation and casting of I2CHat config address
* Move service helpers to LifxManager
* Add lifx_set_color
This is a synonym for light.turn_on except it does not actually turn on the
light unless asked to.
Thus, turn_on can be implemented just by asking.
* Rename set_color to set_state
* Support power=False with lifx_set_state
* Added Axis hub, binary sensors and camera
* Added Axis logo to static images
* Added Axis logo to configurator
Added Axis mdns discovery
* Fixed flake8 and pylint comments
* Missed a change from list to function call
V5 of axis py
* Added dependencies to requirements_all.txt
* Clean up
* Added files to coveragerc
* Guide lines says to import function when needed, this makes Tox pass
* Removed storing hass in config until at the end where I send it to axisdevice
* Don't call update in the constructor
* Don't keep hass private
* Unnecessary lint ignore, following Baloobs suggestion of using NotImplementedError
* Axis package not in pypi yet
* Do not catch bare excepts. Device schema validations raise vol.Invalid.
* setup_device still adds hass object to the config, so the need to remove it prior to writing config file still remains
* Don't expect axis.conf contains correct values
* Improved configuration validation
* Trigger time better explains functionality than scan interval
* Forgot to remove this earlier
* Guideline says double qoutes for sentences
* Return false from discovery if config file contains bad data
* Keys in AXIS_DEVICES are serialnumber
* Ordered imports in alphabetical order
* Moved requirement to pypi
* Moved update callback that handles trigger time to axis binary sensor
* Renamed configurator instance to request_id since that is what it really is
* Removed unnecessary configurator steps
* Changed link in configurator to platform documentation
* Add not-context-manager (#7523)
* Add not-context-manager
* Add missing comma
* Threadsafe configurator (#7536)
* Make Configurator thread safe, get_instance timing issues breaking configurator working on multiple devices
* No blank lines allowed after function docstring
* Fix comment Tox
* Added Axis hub, binary sensors and camera
* Added Axis logo to static images
* Added Axis logo to configurator
Added Axis mdns discovery
* Fixed flake8 and pylint comments
* Missed a change from list to function call
V5 of axis py
* Added dependencies to requirements_all.txt
* Clean up
* Added files to coveragerc
* Guide lines says to import function when needed, this makes Tox pass
* Removed storing hass in config until at the end where I send it to axisdevice
* Don't call update in the constructor
* Don't keep hass private
* Unnecessary lint ignore, following Baloobs suggestion of using NotImplementedError
* Axis package not in pypi yet
* Do not catch bare excepts. Device schema validations raise vol.Invalid.
* setup_device still adds hass object to the config, so the need to remove it prior to writing config file still remains
* Don't expect axis.conf contains correct values
* Improved configuration validation
* Trigger time better explains functionality than scan interval
* Forgot to remove this earlier
* Guideline says double qoutes for sentences
* Return false from discovery if config file contains bad data
* Keys in AXIS_DEVICES are serialnumber
* Ordered imports in alphabetical order
* Moved requirement to pypi
* Moved update callback that handles trigger time to axis binary sensor
* Renamed configurator instance to request_id since that is what it really is
* Removed unnecessary configurator steps
* Changed link in configurator to platform documentation
* No blank lines allowed after function docstring
* No blank lines allowed after function docstring
* Changed discovery to use axis instead of axis_mdns
* Travis CI requested rerun of script/gen_requirements_all.py
* Support adding different server locations
* Rename variables and move CONF_ const into component as requested in review
* Fix unittests
* Forgot to add tests for microsoft_face_identify
* ps - do not install all dependencies
* Comment out blinkt because it depends on GPIO
* Add pip upgrade check back
* Disable import error blinkt
* Update comment
* Fix comment
* Generate a new updateDate with every call
This should fix#7459
Tests need to be updated in another commit.
* Replace STATIC_TIME with datetime object check
Removing the "DATE" argument from the Alexa component's configuration (because it is now dynamically generated) requires this commit's changes to the test cases to check that the updateDate data is a datetime type rather than a specific hardcoded value ('2016-10-10T19:51:42.0Z').
* Fix brackets
* Make Configurator thread safe, get_instance timing issues breaking configurator working on multiple devices
* No blank lines allowed after function docstring
* Fix comment Tox
* telegram_bot and notify.telegram enhancements:
- Receive callback queries and produce `telegram_callback` events.
- Custom reply_markup (keyboard or inline_keyboard) for every type of message (message, photo, location & document).
- `disable_notification`, `disable_web_page_preview`, `reply_to_message_id` and `parse_mode` optional keyword args.
- Line break between title and message fields: `'{}\n{}'.format(title, message)`
- Move Telegram notification services to `telegram_bot` component and forward service calls from the telegram notify service to the telegram component, so now the `notify.telegram` platform depends of `telegram_bot`, and there is no need for `api_key` in the notifier configuration. The notifier calls the new notification services of the bot component:
- telegram_bot/send_message
- telegram_bot/send_photo
- telegram_bot/send_document
- telegram_bot/send_location
- telegram_bot/edit_message
- telegram_bot/edit_caption
- telegram_bot/edit_replymarkup
- telegram_bot/answer_callback_query
- Added descriptions of the new notification services with a services.yaml file.
- CONFIG_SCHEMA instead of PLATFORM_SCHEMA for the `telegram_bot` component, so only one platform is allowed.
- Async component setup.
* telegram_bot and notify.telegram enhancements: change in requirements_all.txt.
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* more info
* Add usercodeview
* Improve api
* Improve api
* Separate api into own file.
* disable missing import
* review changes
* Tests 1
* Verify that we fetch data from groups
* Tests groups
* config 1
* usercode 1
* Api mods
* Tweak API
* docstrings
* 100% api testing
* Refactor sun component for correctness
* Convert datetimes to dates for astral
* Fix tests for updated code
* Fix times now that calcs are fixed
* Move sun functions to helpers
* Fix flake on new file
* Additional tweaks from review
* Update requirements
The hue is now a float but the hsbk conversion still believed it to be
an integer that could not be larger than 359. The float can in fact be,
for example, 359.9 and this would cause an out-of-bounds error in the
set_color call.
For completeness, the initial hue is also changed to a float.
* Fix plant MIN_TEMPERATURE, MAX_TEMPERATURE validation
small_float only allows values from 0 to 1 so we should use float instead
* Do not use vol.All for a single validation
* Fix plant MIN_TEMPERATURE, MAX_TEMPERATURE validation
small_float only allows values from 0 to 1 so we should use float instead
* Do not use vol.All for a single validation
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
* Remove default zwave config path
PYOZW now has much more comprehensive default handling for the config
path (in src-lib/libopenzwave/libopenzwave.pyx:getConfig()). It looks in
the same place we were looking, plus _many_ more. It will certainly do a
much better job of finding the config files than we will (and will be
updated as the library is changed, so we don't end up chasing it). The
getConfig() method has been there for a while, but was subsntially
improved recently.
This change simply leaves the config_path as None if it is not
specified, which will trigger the default handling in PYOZW.
* Install python-openzwave from PyPI
As of version 0.4, python-openzwave supports installation from PyPI,
which means we can use our 'normal' dependency management tooling to
install it. Yay.
This uses the default 'embed' build (which goes and downloads
statically sources to avoid having to compile anything locally). Check
out the python-openzwave readme for more details.
* Add python-openzwave deps to .travis.yml
Python OpenZwave require the libudev headers to build. This adds the
libudev-dev package to Travis runs via the 'apt' addon for Travis.
Thanks to @MartinHjelmare for this fix.
* Update docker build for PyPI openzwave
Now that PYOZW can be install from PyPI, the docker image build process
can be simplified to remove the explicit compilation of PYOZW.
* Add new raspihats component
* added raspihats to COMMENT_REQUIREMENTS in gen_requirements_all.py
* disabled pylint import errors
* using hass.data for storing i2c-hats manager
Recent aiolifx allow sending messages to unregistered devices (as a
no-op). This is handy because bulbs can disappear anytime we yield and
constantly testing for availability is both error-prone and annoying.
So keep the aiolifx device around until a new one registers on the same
mac_addr.
State restoration takes up to a second because bulbs can be slow to react.
During this time an effect could keep running, overwriting the state that we
were trying to restore.
Now the effect forgets the light immediately and it thus avoids further
changes while the restored state settles.
Forcing a refresh will log a warning if the periodic async_update happens
to be running already.
So let's do the refresh locally and remove the force_refresh.
This clears the internal cache in case polling picked up the state as set by
an effect.
For example, aborting an effect by selecting a new brightness could keep a
color set by the effect.
Recent aiolifx allow sending messages to unregistered devices (as a
no-op). This is handy because bulbs can disappear anytime we yield and
constantly testing for availability is both error-prone and annoying.
So keep the aiolifx device around until a new one registers on the same
mac_addr.
* Added osramlighrify groups.
Allows you to make use of the build in osram lightify groups. Group states get
handeled similar as in the case of phillips hue. A lightify group shows up as
light in the homeassistant webinterface. If one light of the
group is on, the complete group is considered to be on.
To use this feature, first define some groups within your lighrify bridge, then
set add `allow_lightify_groups=true` to you osramlightify config.
It might look like:
````yaml
- platform: osramlightify
host: IP-ADDRES
allow_lightify_groups: true
```
* Fixed Pylint errors.
* Included requests.
* Included more requests.
* Fixed setup bridge and removed _light attribute.
* Update osramlightify.py
Forcing a refresh will log a warning if the periodic async_update happens
to be running already.
So let's do the refresh locally and remove the force_refresh.
State restoration takes up to a second because bulbs can be slow to react.
During this time an effect could keep running, overwriting the state that we
were trying to restore.
Now the effect forgets the light immediately and it thus avoids further
changes while the restored state settles.
This clears the internal cache in case polling picked up the state as set by
an effect.
For example, aborting an effect by selecting a new brightness could keep a
color set by the effect.
* Convert automatic device tracker to push updates
* Update test
* Add to coveragerc
* Fire hass events when automatic update received
* Change brace indentation
* Add Sensibo climate platform
* Force update after running a service
* Add sensibo to .coveragerc
* Use 10s timeout
* Fix schema. Remove print.
* Better handle unit conversions.
This allows for more of a disco mode where lights change so fast that you
actually notice it.
Also change the valid period to the maximum 20 msgs/sec that LIFX bulbs
can handle.
First, move the default away from turn_on so we do not have to test for
the current service.
Next, change the default color away from random. The new default is that
saturated colors will flash white and desatured colors will flash to their
fully satured color. Always with full brightness.
After many experiments, this was the method that best produced results that
are both visually pleasing and always noticeable as a flash.
* correct MQTT subscription filter
* wildcard handling (#) fixed
* wildcard handling (#) fixed
* added tests for topic subscription like +/something/#
* function names changed (line too long)
* using raw strings for regular expression
import order changed
* OpenGarage.io support
Cleaned up component and ran lint checking
* Fixing lint errors
* Added supported_features and device_class
* Added timeout to HTTP Requests and other changes based on feedback.
* Removed watcher. It provided little value and could cause issues if status was stuck in a state.
* Changes based on feedback. Added error checking for invalid device_key.
* Lint
* add support for shuffle toggling on Spotify component.
this also required adding support for shuffle on the
media_player component.
* lint
* Use ATTR_MEDIA_SHUFFLING for service handler param
* Line too long fix
* fix tests
* add shuffle set to demo mediaplayer
* rename shuffle attribute
* new implementation without mqtt
* fixed lint findings
* fixed more lint findings
* fixed final flak8 error
* added unit tests for platform "plant"
* - changed status to "OK" / "problem"
- added attribute "problem" with details on the problems
- removed unused constant
- setting icon to "?" until we have meaningful data
* reformatted code to meet line length requirements
* binary_sensor.workday: fix handling of states vs provinces
* Add test cases for workday sensor with states
* remove redundant assignment
* Repair unit test to improve coverage
Patch from Wolf-Bastian Pöttner
* Fix handling of invalid states/provinces
* fix indentation to satisfy pylint
* - changed updater to only do updated if they succed and handle calls when tv is off better by only doing 1 remote call
- show all sources instead of only connected, to fix source selection when unit is powered off
- fixed sources so they can launch apps and select sources
* fixed lint errors
* show all sources and apps if no custom options are defined in the conf
* fixed indentation for lint
* set _current_source when state is off and fixed timeout exception
* Flux switch: avoid updates when off
Calling turn_on when the switch is already on would orphan the existing
time tracker, losing our ability to cancel it when turn_off is called.
* Cleanups
The self.is_on property can now be found from self.unsub_tracker, so
get rid of the self._state attribute.
Add an entry guard to turn_on, making further conditionals unnecessary.
* light.sensehat: adding plugin to control the 8x8 LED matrix on a Sense Hat
* add new .coveragerc entry
* light.sensehat: formatting and removing unused import
* light.sensehat: add to requirements list
* light.sensehat: update docstrings to the linter's specs
* light.sensehat: add a bit more docstring
* Remove global limit on white light temperature
Here are the supported temperatures of some popular bulbs:
Philips Hue: 2000K-6500K (the current 500-154 mired range)
LIFX Color 1000: 2500K-9000K
IKEA TRÅDFRI: 2200K, 2700K, 4000K
Obviously, Home Assistant cannot enforce a global limit and work properly
with all of these bulbs. So just remove the limit and leave it up to each
platform to work it out.
This commit updates the existing users and adds a clamp to Hue (where the
limit appears to have originated). It does not attempt to update other
platforms that might need extra handling of the larger range that is now
possible.
* Add min_mireds/max_mireds state attributes to lights
* Support min_mireds/max_mireds with LIFX lights
This makes more sense because the input and output brightness is the same.
We currently convert through RGB which does contain a brightness so we supply
an arbitrary value as input and discard the output.
* Allow InfluxDB to blacklist domains
This adds an option to InfluxDB to blacklist whole domains. This is
useful for domains like automation or script, where no statistic data
is needed.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittest for InfluxDB domain blacklist
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Use common include/exclude config for InfluxDB.
Its now the same syntax as it is for recorder.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittests for InfluxDB include whitelist.
There where no tests for that feature before.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Default to white when setting LIFX temperature
Changing the temperature of a saturated color is possible but not very
interesting. So assume that a change of the temperature implies setting
the color to white, unless a different color is actually specified.
This makes the frontend temperature picker much more useful because it can
now be used to get away from a colored light.
* Default to a neutral white temperature when setting LIFX colors
This means that setting a particular color will always give the same output,
no matter what the temperature was previously at.
* Find brightness after colors
Now the color_temp logic will not see a changed color when setting
temperature+brightness and thus we will actually get a white light in
this situation.
The XY conversion can then not use brightness as input. This is not
an issue because XY only affects hue and saturation, not brightness. So
we can just use an arbitrary value as brightness input.
* Add a simple comment to a complex conditional
* Add support for Zigbee Home Automation
* Fewer magic numbers
* Make optional device config work
* Remove non-zha device_tracker stuff
* Always return boolean from is_on
* Only pass through JSON serializable discovery_info
* Update to bellows 0.2.4
* Fewer magic numbers in binary sensor
* Populate const structures from a function
* Update bellows to 0.2.6
* Fewer magic numbers in light
* Take all possible clusters when overriding
* Update bellows to 0.2.7
* rss_feed_template initial checking
* lint
* Remove use of deprecated cgi-escape()
* Switching back to chardet==2.3 (resolve failing tests with 3.0)
* Code and test improvments
* Option 'requires_api_password', default is True
* Added initial support for tradfri group control
* Tried to keep original variable structure
* pylint and pep8 fixes
* Fixed lint error about docstring
* Removed unneeded stuff, renamed _light. Needs to be released pytradfri version.
* Better naming of variables inside add_devices call.
* Always register the view if a webhook exists.
* Return True if platform is set up succesfully, False otherwise.
* Remove the webhook when home assistant stops. Webhooks and long
polling are mutually excklusive. If a webhook is left after home
assistant is stopped, a polling telegram bot is unable to be set up,
on next start of home assistant.
* wierd pylint complaint
* Workaround for Graber csz1 shades
* logging
* Try direct
* Try direct
* Use workaround
* Review changes and tests
* test
* reset test
* Use Bright and Dim also as open and close is
* Fixes utf-8 encoding no longer required by libopenzwave0.3.3
Removes byte encoding for values operation mode, fan mode and swing
mode.
* Fix zwave climate tests for utf-8 change
* Add script to import state events to InfluxDB
This adds a script to import recorded events from a recorder database
to a InfluxDB instance. This can be useful for initial importing after
setup of a InfluxDB.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Fix step argument handling in Influx import
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Correct typo in InfluxDB Importer
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Update influxdb_import.py
* Refactor matrix notify service.
This refactor aims to close#6118 by making the save / restore of the
authentication tokens much more resilient to failure.
It also refactors the module so that all the functionality is part of the class
and that a login failure causes the service to fail on setup rather than at
message send time.
* Make the linter overlords happy
* Improve logger levels and messages
* small style change
* Fix indentation issue
* Always register the view if a webhook exists.
* Return True if platform is set up succesfully, False otherwise.
* Remove the webhook when home assistant stops. Webhooks and long
polling are mutually excklusive. If a webhook is left after home
assistant is stopped, a polling telegram bot is unable to be set up,
on next start of home assistant.
* avion light: Bump python-avion dependency version
The dependencies in python-avion weren't sufficiently strict. This is now
fixed, but means we need to depend on a new version.
* decora light: Bump python-decora dependency
There's a new version of python-decora with a reliability fix, so depend on
that.
* wierd pylint complaint
* Workaround for Graber csz1 shades
* logging
* Try direct
* Try direct
* Use workaround
* Review changes and tests
* test
* reset test
* Use Bright and Dim also as open and close is
* Added the pushbullet sensor component
* Updated requirements_all.txt and .coveragerc with the new sensor
* Updated acording to houndci-bots comments
* Some more changes
* Final change by the hound (?)
* Fixes from balloobs review and from houndci-bot
This changes the sensors information to only contain one attribute
as information, and the rest as device_state_attributes.
* Added leading space to comments
* Added docstrings, removed API_KEY from log, changed imports
* The hound is at it again
* Fix remaining issues
* Fix pylint issue
* updated pylgtv module to fix problems with timeouts
* - update pylgtv to 0.1.6
- handle new TimeoutError exception from pylgtv
* used full name for exception handling of concurrent.futures._base.TimeoutError
* the exception handling should now follow the rules
* float typecasting should not be necessary
* use asyncio for TimeoutError it’s an alias for concurrent.futures.TimeoutError
* updated pylgtv module to fix problems with timeouts
* - update pylgtv to 0.1.6
- handle new TimeoutError exception from pylgtv
* used full name for exception handling of concurrent.futures._base.TimeoutError
* the exception handling should now follow the rules
* float typecasting should not be necessary
* use asyncio for TimeoutError it’s an alias for concurrent.futures.TimeoutError
The arwn platform was refactored to be asyncio friendly, however in
doing so one thing was missed which was explicitly telling hass when
something interesting has happened. This led to the very interesting
to debug issue that the state cards were all out of date, even though
the graphs were not.
The arwn platform was refactored to be asyncio friendly, however in
doing so one thing was missed which was explicitly telling hass when
something interesting has happened. This led to the very interesting
to debug issue that the state cards were all out of date, even though
the graphs were not.
* Update ios.py
as discussed. the part:
if battery_state == ios.ATTR_BATTERY_STATE_FULL:
returning_icon_level = DEFAULT_ICON_LEVEL
kinda screws up the charging icon.
i might just miss a logical solution for that though.
let me know what you think. it might not be beautiful but i think its an overall improve over the current "double battery" solution
* Update ios.py
chound fix and full_battery_charge fix
* Update ios.py
removed new line
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* merged request from robbie
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
as discussed. the part:
if battery_state == ios.ATTR_BATTERY_STATE_FULL:
returning_icon_level = DEFAULT_ICON_LEVEL
kinda screws up the charging icon.
i might just miss a logical solution for that though.
let me know what you think. it might not be beautiful but i think its an overall improve over the current "double battery" solution
* Update ios.py
chound fix and full_battery_charge fix
* Update ios.py
removed new line
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* Update ios.py
* merged request from robbie
* Update ios.py
* Update ios.py
* Update ios.py
* Refactor into find_hsbk
This will be useful for new methods that also have to find passed in colors.
* Add AwaitAioLIFX
This encapsulates the callback and Event that aiolifx needs and thus avoids an
explosion of those when new calls are added.
The refresh_state is now generally useful, so move it into its own method.
* Initial effects support for LIFX
These effects are useful as notifications. They mimic the breathe and pulse
effects from the LIFX HTTP API:
https://api.developer.lifx.com/docs/breathe-effecthttps://api.developer.lifx.com/docs/pulse-effect
However, this implementation runs locally with the LIFX LAN protocol.
* Saturate LIFX no color value
Now the color is "full saturation, no brightness". This avoids a lot of
temporary white when fading from the "no color" value and into a real color.
* Organize LIFX effects in classes
This is to move the setup/restore away from the actual effect, making it quite
simple to add additional effects.
* Stop running LIFX effects on conflicting service calls
Turning the light on/off or starting a new effect will now stop the running
effect.
* Present default LIFX effects as light.turn_on effects
This makes the effects (with default parameters) easily accessible from
the UI.
* Add LIFX colorloop effect
This cycles the HSV colors, so that is added as an internal way to set a
color.
* Move lifx to its own package and split effects into a separate file
* Always show LIFX light name in logs
The name is actually the easiest way to identify a bulb so just using it
as a fallback was a bit odd.
* Compact effect getter
* Always use full brightness for random flash color
This is a stopgap. When a bit more infrastructure is in place, the intention
is to turn the current hue some degrees. This will guarantee a flash color
that is both unlike the current color and unlike white.
* Clear effects concurrently
We have to wait for the bulbs, so let us wait for all of them at once.
* Add lifx_effect_stop
The colorloop effect is most impressive if run on many lights. Testing
this has revealed the need for an easy way to stop effects on all lights
and return to the initial state of each bulb. This new call does just that.
Calling turn_on/turn_off could also stop the effect but that would not
restore the initial state.
* Always calculate the initial effect color
To fade nicely from power off, the breathe effect needs to keep an
unchanging hue. So give up on using a static start color and just find the
correct hue from the target color.
The colorloop effect can start from anything but we use a random color
just to keep things a little interesting during power on.
* Fix lint
* Update .coveragerc
* Refactor into find_hsbk
This will be useful for new methods that also have to find passed in colors.
* Add AwaitAioLIFX
This encapsulates the callback and Event that aiolifx needs and thus avoids an
explosion of those when new calls are added.
The refresh_state is now generally useful, so move it into its own method.
* Initial effects support for LIFX
These effects are useful as notifications. They mimic the breathe and pulse
effects from the LIFX HTTP API:
https://api.developer.lifx.com/docs/breathe-effecthttps://api.developer.lifx.com/docs/pulse-effect
However, this implementation runs locally with the LIFX LAN protocol.
* Saturate LIFX no color value
Now the color is "full saturation, no brightness". This avoids a lot of
temporary white when fading from the "no color" value and into a real color.
* Organize LIFX effects in classes
This is to move the setup/restore away from the actual effect, making it quite
simple to add additional effects.
* Stop running LIFX effects on conflicting service calls
Turning the light on/off or starting a new effect will now stop the running
effect.
* Present default LIFX effects as light.turn_on effects
This makes the effects (with default parameters) easily accessible from
the UI.
* Add LIFX colorloop effect
This cycles the HSV colors, so that is added as an internal way to set a
color.
* Move lifx to its own package and split effects into a separate file
* Always show LIFX light name in logs
The name is actually the easiest way to identify a bulb so just using it
as a fallback was a bit odd.
* Compact effect getter
* Always use full brightness for random flash color
This is a stopgap. When a bit more infrastructure is in place, the intention
is to turn the current hue some degrees. This will guarantee a flash color
that is both unlike the current color and unlike white.
* Clear effects concurrently
We have to wait for the bulbs, so let us wait for all of them at once.
* Add lifx_effect_stop
The colorloop effect is most impressive if run on many lights. Testing
this has revealed the need for an easy way to stop effects on all lights
and return to the initial state of each bulb. This new call does just that.
Calling turn_on/turn_off could also stop the effect but that would not
restore the initial state.
* Always calculate the initial effect color
To fade nicely from power off, the breathe effect needs to keep an
unchanging hue. So give up on using a static start color and just find the
correct hue from the target color.
The colorloop effect can start from anything but we use a random color
just to keep things a little interesting during power on.
* Fix lint
* Update .coveragerc
* Refactored mvglive.py
This pull requests builds on the first work with the mvglive sensor:
- Refactoring the code so that multiple sensors for departures can be added
- Rewrites the transport mode restrictions ("products") to be more modular
- Fixes bugs, such as missing implementation of line restriction
- Other improvements, such as including data attribution
* Further improvements to mvglive sensor
- The API returns the property 'direction', which can be used to filter U-Bahn trains by direction without having to enter all final destinations
- The sensor icon now corresponds to the mode of transport of the next departure
* UBahnDirection refactored
U-Bahn SEV (bus replacement services) have unexpected direction values, fixed resulting bug and hound issues
* ready for PR
* minor fix
* another minor fix
* new platform mqtt_json
* using ATTR constants
* voluptuous check on JSON payload
* voluptuous check on JSON payload
* Add condition for API failure
If you are not running the latest ve3rsion of ZM this will cause exceptions to fire. This fix handles a response from ZM but a non successful attempt.
This resolves the issue https://github.com/home-assistant/home-assistant/issues/7178
* Fixed houndci-bot issues
* added new service
* fixed basic test in kodi platform
* Added new method async_get_albums
* Added new methods in module kodi
* added method find_song in kodi module
* method add_song_to_playlist made
async
* Added media type to method async_play_media
* added methods async_clear_playlist
and play_song
* methods play_song and find_song
made async
* added new service play_song
* Improved kodi._find
now it find for whole words only
* added possibility to specify artist in
kodi.async_find_artist
* added kodi.async_find_album
* added new optional input to play_song service
* In async_play_song added handling of no song found
* default artist value changed to ''
* async_add_song_to_playlist now can also
search for musinc
* added service add_song_to_playlist
* Added new service add_album_to_playlist
* added services to switch shuffle mode
* added service add_all_albums_to_playlist
* handled error in async_unset_shuffle
and async_set_shuffle
* Added abstract methods to media_player
* _server substituted with server property
* style made consistent with requirements
* Fixed issue with pylint
* Services moved to kodi platform
* service play_song removed
* removed service unset_shuffle
* all add services merged into one
* removed service get_artists
* added kodi_ to service names
* Fixed some style issues
* Removed changes in media_player __init__
* Implemented requested changes
* Fixed pylint problem
* Value of 0 should not be considered `unknown`.
* Reflect disconnect state in entity states.
* Due to adding unknown state on disconnect, the amount of reconnects can sometimes be more. Test for at least 2 reconnect attempts.
* Fixes issue with id mismatch when multiple devices are connected to the lutron bridge
* Updates labels
* removes no longer needed config values.
* removes no longer needed imports
* Add support for tradfri color temp
* Only return rgb_color if supported features indicate support.
* Return color_temp if supported features indicate support and dict
with allowed color temperatures exist for manufacturer.
* Add manufacturer specific supported features, with default.
* Color temperature is set from a dict of allowed pairs per
manufacturer, where kelvin is mapped to hex_color. When a user sets a
color temperature, the closest matching temperature is selected and
set.
* Clean up
* exposed content_type in rest_command, which allows for manually specifying the content_type for more-strict api endpoints
* fixed up column length
Length was 86 chars, and it needed to be 79
* double import of HTTP_HEADER_CONTENT_TYPE
Removed the accidental double-import of HTTP_HEADER_CONTENT_TYPE
* moved rest_command-specific config value into component
* if no content_type, default to None
* unit test
* newline
* unused CONTENT_TYPE_TEXT_PLAIN
* removed the http-agnostic abstraction hass provided in favor of aiohttps hdrs constant
* Cache the name of LIFX lights
After #7031 the LIFX device will change during an unregister/register
transition. This has the user-visible effect of the new device missing
a friendly name until the next poll.
We now cache the name internally and it will then transfer to the new
device when it registers.
* Allow LIFX logging even without an available device
This will allow us to set the device to None when it unregisters.
* Calculate LIFX availability from the existence of a device
This has become possible because the device is no longer needed
to provide the name of the light when it is unavailable.
We just have to forget the device when it unregisters.
* Always return True/False from is_state and is_state_attr
These functions are documented to always return True/False but the
short-circuit evaluation would return None if the entity_id did not exist.
* Reword into a single statement
* Fix mysensors callback
* All messages was not triggering proper updates. Fix by checking all
child value types each update.
* Upgrade mysensors dep
* Fix pickle persistence when upgrading.
* Make Tradfri discoverable
* Fix lint errors
* Fix bugs and clean up calls to light_control
* Add more color util tests
* Add coap client to dockerfile
* After rebase and all fixes
* Added color_rgb_to_hex to util.color
* Added test_color_rgb_to_hex
* Changed reference to color_rgb_to_hex
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Rolled back to 0.4
* Rolled back to 0.4
When pinging an inaccessible device, OS errors like
ping: sendto: No route to host
can occur. For a ping tracker this is not an error but rather a normal
situation. Thus, it makes sense to hide the error.
* Added initial support for IKEA Tradfri Gateway
* Pinned requirement
* Fixed lint-errors
* Added file to .coveragerc
* Trying to fix commit
* Fixed requirements_all again
* Minor reorder of code
* Minor reorder of code
* Made the changes suggested by @balloob
* Made the changes suggested by @balloob and removed debug
* Update tradfri.py
* Responsiveness
* Delay was not needed as commands does not return until done.
* Add support for cleaning maps and cleaning data
* Hound
* Docstring
* Update requirements
* Review changes
* External lib now returns the raw data.
* debug
* Sensor did not refresh
* Error handling
* Issue warning on connection error
* Update requirements
* Review changes
* Managing binary payloads
Hello,
background: I wrote a HA camera component that gets the image from a binary payload. I'm testing it with Zanzito (https://play.google.com/store/apps/details?id=it.barbaro.zanzito) and it works apparently well: it gets the image and correctly displays it in the front-end.
But I had to make the changes I'm proposing here: the message was being blocked because the utf-8 decoding failed.
As far as I know, the utf-8 encoding is required for the topic, not for the payload. What I did here was try the utf-8 decoding, but even if unsuccessful, it dispatches the message anyway.
Is there anything else I'm missing?
thanks
Gianluca
* Update __init__.py
* Update __init__.py
* Update __init__.py
* git test - ignore
* Should work
* minor fixes
* updated mqtt/services.yaml
* added two tests, modified threaded subscribe
* removing polymer
* requested changes
* requested changes - minor fix
* security wrap around payload_file_path
* services.yaml updated
* removed file publishing
* minor fix
* Added AlarmDecoder platform
* remove try/catch for generic execption
* Changes for @pvizeli, thanks for the review!
Removed _ prefix from normal function variables
Removed _hass as it will be set via .hass for us
Broke out the three config (socket, serial, usb) and use vol.Any
Added support for USB I think, don't have device, but should work
Removed components dictionary, was form old group all code that didn't work
* Fix hass string handling
* Fix mysensors callback
* All messages was not triggering proper updates. Fix by checking all
child value types each update.
* Upgrade mysensors dep
* Fix pickle persistence when upgrading.
* Plug file leak on LIFX unregister
The aiolifx 0.4.4 release closes its socket when the unregister callback is
called. This plugs a file descriptor leak but also means that we must be
careful to not use the device after it goes unavailable.
Also, when a light reappears, it has a new device that must be used.
* Do not test self.available in service calls
The core will learn to handle that.
* Plug file leak on LIFX unregister
The aiolifx 0.4.4 release closes its socket when the unregister callback is
called. This plugs a file descriptor leak but also means that we must be
careful to not use the device after it goes unavailable.
Also, when a light reappears, it has a new device that must be used.
* Do not test self.available in service calls
The core will learn to handle that.
* Fix#6783, remove a test that makes no sense anymore
* Fix#6784
* Fix typo in docstring
* Fix handling of known->unknown state, extended test, fix lint errors
* Better handling of mismatch in unit of measurement.
Set state to "unkown" and unit of measurement to "ERR" if unit of measurement differs between aggregatet states.
Add entity_id to logged warning.
* Make icon configurable
* Fix typo
* Fix lint
* Fix lint
* Fix lint
* Add option to set entity_id on min_max sensor
* Fix lint logging-not-lazy
* Revert "Add option to set entity_id on min_max sensor"
This reverts commit 4685f26647.
* Revert "Make icon configurable"
This reverts commit fe45aec82d.
* Fixes
* Adding exception handling when fetching the camera image to avoid python errors when host is not reachable or any url errors to camera
* Added exception as ConnectionError instead of plain except
* Added exception as ConnectionError instead of plain except. Removed the unused error handle
* Initial import for HassIO
* Cleanup api code for views
* First unittest for view
* Add test for edit view
* Finish unittest
* fix addons test
* cleanup service.yaml
* Address first round with ping command
* handle timeout dynamic
* fix lint
* Adding exception handling when fetching the camera image to avoid python errors when host is not reachable or any url errors to camera
* Added exception as ConnectionError instead of plain except
* Added exception as ConnectionError instead of plain except. Removed the unused error handle
* Initial import for HassIO
* Cleanup api code for views
* First unittest for view
* Add test for edit view
* Finish unittest
* fix addons test
* cleanup service.yaml
* Address first round with ping command
* handle timeout dynamic
* fix lint
* Added average temperature for the day before and the current period
* Fixed "line too long" warnings
* Fixed "indentation contains tabs" and "indentation contains mixed spaces and tabs" warnings
* Fixed "trailing whitespace" warnings
* upgrade pyhydroquebec requirements to version 1.1.0
* Fire EVENT_HOMEASSISTANT_START automations off right away while starting
* Actually have core state be set to 'starting' during boot
* Fix correct start implementation
* Test and deprecate event automation platform on start
* Fix doc strings
* Remove shutting down exception
* More strict when to mark an instance as finished
* Add automation platform to listen for start/shutdown
* When we stop we should wait till it's all done
* Fix testing
* Fix async bugs in tests
* Only set UVLOOP when hass starts from CLI
* This hangs normal asyncio event loop
* Clean up Z-Wave node entity test
* Added eddystone_temperature platform.
* Fixed style issues.
* Fixed style issues #2.
* Fixed style issues #3.
* Added new platform to .coveragerc
* Refactored platform to use the beacontools package.
* Fixed style issues and added beacontools to excluded requirements.
* Removed obsolete constants and added pylint exception.
* Added blank line
* Updated beacontools to version 1.0.0
* Updated beacontools to version 1.0.1
* Forgot to regenerate requirements_all
* Minor changes
* Input Boolean: initial state > restore state
* Input select: initial state overrules restored state
* Input slider: initial state overrule restore state
* Lint
* Lint
* total connect alarm support
* linting fixes
* linting fixes
* docstring
* docstring
* use sync and update coveragerc
* remove unused import
* changes as per notes
* Update HA code style
The Hook switch component currently uses username/password to get a token
from the Hook web app to use for subsequent requests. This adds an option
to specify the token directly in config.
Makes the 'password' and 'token' options mutually exclusive since
otherwise one would have to take precedence, and it seems worth
preventing people from filling their config with passwords that don't
even need to be there.
* Automation: initial state > restore state
* Clean up code
* Ensure MQTT defaults are used.
* Ensure failed platforms always return None
* Automation: write state to state machine after start
* Added Met Office weather and sensor components
* Removed unnecessary dependancy
* Generated requirements
* Fix time interval
* Updated coverage
* Some review changes
* Allow user to specify lat and lon in component
* Added missing import
* Fixed unit
* Fixed import indent
* Updated condition to use CONDITION_CLASSES
* - Introduced Ring binary_sensor.
- Added unittest for Ring binary_sensor.
- Bumped ring_doorbell 3rd party module.
* Updated requirements
* Added correct file for unittest
* - Introduced Ring binary_sensor.
- Added unittest for Ring binary_sensor.
- Bumped ring_doorbell 3rd party module.
* Updated requirements
* Added correct file for unittest
* Added extra sensors last_ding and last_motion
* Modified Ring binary_sensor and sensor to inherit DOMAIN configuration
* Moved static to top ring.py
* Fixed requirements
* Bump version ring_doorbell to 0.1.2
* testing unittests
* Use hass.data dict instead GLOBALS
* Fixed unittests
* Bump ring_doorbell to 0.1.3
* Updated unittest and coverted to use decorator @requests_mock.Mocker()
* Updated ring_session with lower case
When the user exceeds the request limit for google APIs, the response status stays at 200 but the response body is different:
```
{
"error_message" : "You have exceeded your daily request quota for this API. We recommend registering for a key at the Google Developers Console: https://console.developers.google.com/apis/credentials?project=_",
"results" : [],
"status" : "OVER_QUERY_LIMIT"
}
```
This prevents HA from creating the initial configuration
* Add legacy LIFX platform for Windows support
The async platform introduced in 9ef084d903 has
turned out to use Python functionality that is not available in Windows.
This commit restores the previous implementation, now named lifx_legacy.
* Add a comment about the platform being a legacy implementation
* Warn when using unsupported lifx platform on Windows
* Update .coveragerc
* Add support for group commands (allon/alloff).
Add 'group_aliasses' config attribute that only respond to group commands.
Add nogroup_aliases that only respond to 'on' 'off' commands.
Allow settings device id group behaviour.
* Fix linting.
* Fix lint.
* yeelight: adjust supported features on update()
Earlier we checked for the type only during the initialization,
but this won't work when the bulb is disconnected during the init,
causing failures to adjust rgb&color temperature even if those should be supported.
fixes#6692
* Use reassign instead of OR for updating the supported features
* fix WOL in docker/jail
add ip_address parameter to send_magic_packet if host specific.
in docker/jail, WOL doesn't works due to subnet broadcast issues.
* Update wake_on_lan.py
lint
* Add link to docs and remove comments which are obvious
* Update docstrings
* Repleace conf details with link to docs
* Add link to docs
* Update docstrings
* Update import
* Update ordering
* Update ordering
* Update docstring
* Update ordering
* Update ordering
Addressing #6382 . Feedback from github & forums is the bridge_led feature never worked and defining the bridge LED as another group+bulb type is the right way to do this in the limitlessled component.
* New indexes for states table
* Added recorder_runs indexes
* Created a new function for compound indexes.
A new function was created because it makes it a little cleaner when creating
a single-field index since one doesn't have to create a list. This is mostly
when creating the name of the index so with a bit more logic it's possible
to combine it into one function. Given how often migration changes are run,
I thought that code bloat was probably a worthy trade-off for now.
* Adjusted indexes, POC for ref indexes by name.
* Corrected lint errors
* Fixed pydocstyle error
* Moved create_index function outside apply_update
* Moved to single line (just barely)
* Adding expire_after to mqtt sensor to expire outdated values
* Extending test case
* mqtt: refactoring expire_after to use timed events instead of polling; lint
* refactor to reset unused trigger
* Fix: handler must be set to None after execution or removal to avoid warning
* Commenting out non-working test
* Fix lint
* Commit to trigger new build
* Commit to trigger new build
* Make testcase work
* Undo unnecessary change
* Remove default value, add extra check
* Add sensor for Lyft time and price (based on Uber sensor)
* Minor fixes to lyft sensor
- use add_devices(...,True) instead of explicitly calling update
- move sensor name check into constructor
* lyft sensor: disable sandbox mode
* Adds support for the Lutron Caseta family of devices
* Added external requirement
* Removes unuse import
* Adds requirement to requirements_all.txt
* Removes unuse import
* fixes requirement_all.txt. by regenerating
* Cleans up syantax
* Cleans up syantax
* Cleans up syantax
* Cleans up syantax
* Shortens long line
* adds lutron_caseta component to .coveragerc
* Merges into light, removes component
* Fixes long lines
* Fixes requirement.txt
* Removes 'ERROR' log statements. Adds missing dependency
* savig work to pick up on other machine
* Enables Lutron Caseta component with Light and Switch platforms
* Add missing file to .coveragerc
* Changes based on PR review
* fixes requirements file
* Fixes install of paramiko dependency.
* Moves callback registration to
* comment changes
* Platform have no return value
* Change style for guard
* fix logic
* fix lint
* Added tado climate component
named the component v1 because of the unsupported state of the api I
used (mytado.com)
* sensor component
* climate component which uses sensors
* main component initiating sensor and climate devices
* order of imports
* consts for username and password
* removed redundant code
* changed wrong calls and properties
* remove pylint overrides
* merged update() and push_update()
* changed wrong calls
* removed pylint overrides
* moved try..except
* renamed MyTado hass-data object
* added TadoDataStore
* moved update methods from sensor to TadoDataStore
* reorganised climate component
* use new TadoDataStore
* small change to overlay handling
* code refactoring
* removed unnessesary comments
* changed throttle to attribute
* changed suggestions from PR
* Added constant variable for string literal
* remove wrong fget() call
* changed dependencies
* Changed operation mode list
* added human readable list of operations
* removed unnecessary const
* activated update on add_devices
* droped unit
* removed unnused property
* changed temperature conversion
* removed defaults from config
changed naming of tado data const
* switched operation_list key/values
* changed the value returned as state
* added one extra line
* dropped state to use base impl.
* renamed component
* had to inplement temperature_unit
* because it is not implemented in base class
* create a copy of the sensors list
* because it can be changed by other components
* had to check for empty data object
* hass is too fast now
* Fix LIFX unregister races
If the initial state request never got a response, we tried to unregister
a device that was not yet registered.
Also, aiolifx 0.4.2 has an "unregister" race fix.
* Update requirements
* automatically use bundled certificate if certificate-parameter is set to 'auto' and seperate this from which port is specified
* Fix travis error and long lines
* Update __init__.py
* added support for lights with toggle type
* fixed style errors
* introduced tests for the toggle type
it's not passing yet because of an assertionerror at line 407
* updated to reflect tristate of "state"
* Format code according to pep8
Added line break for import that was too long.
* fixed lint, replaced if statement with 'var = bool(test)'
* changed implementation of state check according to bug on 6bceb04ca1 (r106758784)
* Fix hass script execution on Windows (#4977).
hass.exe returned ERRNO2 on a windows machine and must be started using
package loading. This fix adapts the command line options for
`setup_and_run_hass()` to start
either a script with `python homeassistant/__main__.py` or with
`Scripts/hass.exe`
* Fix code style
* Update fritzconnection dependency in fritz and fritzbox_netmonitor components
* Add phone book name lookup support to FritzBox call monitor
* Updated requirements_all.txt
* Requested changes to FritzBox call monitor
* Listen to HOME_ASSISTANT_STOP and close thread
* Safe CPU time
* Add new media_player platform: Volumio Media Player
Volumio media player is a rpi music player, this platfor adds http based control of the player.
* Modify mute command to accept boolean
* Adjust mute call to reset volume after unmute
Remove references to volimi"a"
* Use yield from calls in mute and volume calls
Trying to speed up the indication of mute and volume level changes in UI, but doesn't seem to do much.
* Adjust async_add_devices call
* Added support for multiple efergy sensors in the same household.
Also added inital tests for the efergy platform.
* Fixed current_values units.
Changed name to include efergy_ prefix.
* Optional latitude and longitude to darksky sensor
allow configuration of latitude and longitude in the darksky sensor.
falls back to home assistant coordinates if latitude/longitude not
specified.
* lat/long as inclusive on schema. removed None check for lat/long in setup_platorm
altered schema to require latitude and longitude configured as a pair.
removed None check on latitude and longitude since values will fall back
to hass config if not present
* adhere to line limit of 79 characters
adhere to line limit of 79 characters
* Support for non-clients, NVidia shield, dynamic grouping, extra metadata, and more
* Fixed import orderdering, line lengths, and comment violations
* Local player check and season fixes
* Honor entity_namespace when using custom entity ids
* Semi compatibility with channels, force controls option added
* media_position_updated_at fix - only update when media is playing
* Fix: controls now work as expected on 1) casted sessions and 2) client sessions when client and PMS reside on the same sever
* Made PEP8 compliant
* Made PEP8 compliant
* Made PEP8 compliant, hopefully
* Better Tivo compatibility
* Added frozen detection and remediation
* PlayMedia EPISODE now supports season number and episode number (instead of episode index)
* Fix: Dynamic groups now exclude hidden devices
* Fix: Dynamic groups now exclude hidden devices
* Implemented arsaboo suggested formatting
* Implemented pylint command line suggested fixes
* Implemented Travis CI build suggested fixes
* Sorted Imports using Importanize
* Grouped request imports
* Removed dynamic groups, network calls from properties, and other cleanup
* Balloob recommendations and Plex Protocol Capabilities checks
* Remove deprecated disable-msg in favor of disable
* Removed position related items (seek, frozen detection, etc)
* Removed unused datetime
* Update configuration validation
With the new update, wake_on_lan requires a host key in the configuration
* cast self._host to str as requested
* Changed host key back to optional
* Move LIFX to aiolifx for driving the bulbs
* Fix whitespace
* Fix more whitespace
* Fix lint
* Define _available in init
* Add @callback decorators
* Use hass.async_add_job
* Rename class
* media_player.kodi extra attributes for tvshow and music media
* removed extra whitespaces/CR
* Kodi - add extra attributes #6250 (removed music attributes)
* Restored music attributes, this is ready for merge
* linting amended
* Fix Kodi artist support
* Copy-paste error
* Fix for non-music artist lookup
Kodi returns an emtpy list on videos, so we need to be able to
handle that as well.
* Refactor zwave discovery to entity schema
* Address PR concerns
* Split DISCOVERY_SCHEMAS into separate file
* Only check cover reverse workaround once
* Be able to select tls_version
* This test should always assert this value, not only in 3.6
* Disable linting on future property (py36)
* Only allow TLS 1.0, 1.1 and 1.2
* Fix line length issue
* Fix check config tests
* Allow auto as a TLS version
* Update configuration validation
With the new update, wake_on_lan requires a host key in the configuration
* cast self._host to str as requested
* Changed host key back to optional
* Fix colortemp conversion for osramlightify
Copied from the LIFX fix in 75df4be733.
* Fix style
* Updates from review
@armills:
While we're doing cleanup here, can you just change self._brightness,
self._rgb, self._name, self._temperature, and self._state assignments in
__init__ to None? These will get overwritten when self.update() is called, so
it's safer/cleaner to initialize them to None since it shouldn't matter if
everything is working.
* Fix colortemp conversion for osramlightify
Copied from the LIFX fix in 75df4be733.
* Fix style
* Updates from review
@armills:
While we're doing cleanup here, can you just change self._brightness,
self._rgb, self._name, self._temperature, and self._state assignments in
__init__ to None? These will get overwritten when self.update() is called, so
it's safer/cleaner to initialize them to None since it shouldn't matter if
everything is working.
This increases the global limit to 6535 seconds (1h48m55s) because that is
supported by all light platforms.
Some platforms support even longer transition times so the limit should
actually be platform specific.
* Allow configurable conditions for Pi-Hole sensor
* Include all three conditions by default
* Share Pi-Hole API data across all sensors; eliminate redundant API calls
* Add effect support to MQTT Light
* Use effect state topic for supported_features
* Dont use rainbow as default color
* Add color_temp support to MQTT JSON Light
* Add effect to MQTT JSON light
* Support lights in MQTT discovery
* Allow discovered devices to set their platform
* Add white value support to MQTT Light
* Add white value support to MQTT JSON Light
* Remove blank line
* Add color_temp support to MQTT Template light
* Add white value support to MQTT Template Light
* Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template
* Add XY Color to MQTT Light Platform
* Fix syntax
* Fix more syntax errors
* Revert "Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template"
This reverts commit c03798cb63.
* MQTT Template supports flash and transition but doesnt allow templating of the values
* Add XY color support to MQTT JSON
* Proper variable names
* Only allow whitelisted MQTT platforms to be loaded via MQTT Discovery
* Minor tweaks.
* Add support for remove services / Reload script support
* Reload support for scripts
* Add more unittest for services
* Add unittest for script reload
* Address paulus comments
* Passing pep8, no tests yet
* Fixed some issues with the request throttling
* Removed ability to set throttle time because it was causing more issues than it was worth
* Added blink to .coveragerc
* Changed blinkpy version
* Removed global var, fixed per PR requests
* Added services for camera, migrated switch to binary_sensor
* Added schema for service, fixed naming, removed unused function
Current implementation of connection status doesn't follow convention and is not properly configurable. Might be added again in the future as a full fledged entity or some other way.
For now users can rely on error logging to determine connection status.
* Update to pylgtv 0.1.4
* Send icon with webostv notifications
Default to the homeassistant logo, but allow customizing it on the
component and for individual notifications
* Wait up to 9 seconds
* Set number of recorder retries to 8
* Do not sleep when reporting last connection error if no retries left
* Make sure we clean up old engine if connection is retrying
* Update __init__.py
* Use bundled certificates if port matches mqtts
* Move import requests.certs to top, since it's used in more places
* Add happy and non-happy path tests for default certificate bundle on mqtts port
* Add Zwave refresh services
* services file
* Use dispatcher
* Add zwave prefix to signal
* Delay zwave updates for 100ms to group them.
* Fixes
* lint
* Access _scheduled_update from loop thread only.
* More async
* Some optimizations
* Fix
Message deletion in IMAP is a two step process: first delete, then expunge.
Deleting a message just sets a flag that usually makes the mail client hide
the message. It is the expunge that actually removes the message.
Thus, exclude the deleted messages so that the unread count matches up with
that of most mail clients.
A LIFX bulb maintains its previous color even when the light is off.
For example, if the previous color is blue and the bulb is turned on
and then set to a red color, it will transition through purple colors.
After this commit, the target color is set while the bulb is still
turned off. This overrides the previous color and brightness that the
bulb remembered. The light is then turned on with the requested
transition duration.
For the example, this gives the expected result of only going through
red colors.
* Add ComEd RRTP price sensor
* Update wording to reflect ComEd's naming change from 'RRTP' to 'Hourly Pricing'
* Changed name of sensor source file
* Cleanup based on requested changes
* More cleanup
* small cleanups
* Don't initialize components which have already been discovered (fixes#5588)
* Don't log that we've found a service unless we know it's not a duplicate
* Encode discovery data hash with JSON
This also solves the issue of trying to hash non-hashable objects like dicts
* Add test for duplicate device discovery
* Don't initialize components which have already been discovered (fixes#5588)
* Don't log that we've found a service unless we know it's not a duplicate
* Encode discovery data hash with JSON
This also solves the issue of trying to hash non-hashable objects like dicts
* Add test for duplicate device discovery
* Added support for multiple codes executed in a row
now codes can be specified either by simply providing a single code, which will then be sent like usual, or multiple codes can be executed in a row, specified in a comma delimited format in the configuration.yaml. For example: 111111,222222,333333,444444 would mean 111111 would be sent first, followed by 222222 and 333333 and 444444.
* rpi_rf: added line breaks to not exceed 79 characters per line
* include validation for correct formatting of codes
added regex which only allows either a single number (like 1252456245) or a sequence of commas followed by another number.
* added line breaks to not exceed 79 characters per line
* fix for 'continuation line under-indented for visual indent'
* another try at 'continuation line under-indented for visual indent'
* changed from regex to list for easier maintainability
* removed unnecessary splitting of strings
* Update to Current RGB D65 Conversion
As per Philips Hue https://developers.meethue.com/documentation/color-conversions-rgb-xy
* Update the source of the XYZ to RGB formulas
* Fix Whitespace
* Update Whitespace
* Update Tests for new Formulas
* Update Tests
* Update XY_Brightness_to_hsv tests
* Update test_color.py
* Integrate suggestion in #5590 by nordlead2005. This change has been
sitting in limbo for over a month, but it is a good idea. I don't
mean to step on nordlead2005's toes, but we need to make progress.
* Use defined constant for TEMPERATURE_HOLD
* Integrate handling of vacation into hold mode. Canceling vacation
hold requires an update to the external pyecobee library. Creation
of vacation is not supported (it would be straightforward in the code,
but a complex user interface would be required, similar to what is
now done in the ecobee thermostat).
* Add capability to retrieve list of defined climates from ecobee.
* The mode() method used to return the system mode in internal
representation. However, the user sees a different notation in
the ecobee thermostat. Seeing some internal name is particularly
weired with user-defined climates, where these are named "smart1",
"smart2", etc., instead of the name the user has defined. Return
the user-defined name instead. This change might break some user
interfaces but is easily remedied (e.g., use "Away" instead of
"away").
* Simplify is_away_mode_on().
* Correction of erroneously indented else statement.
* Change comment as flake8 gets confused.
- Bugfix: with f63a79ee we removed `script/home-assistant@.service`
systemd unit file, which is used by Vagrant box to start/stop hass
- simplify interaction with Vagrant, provision.sh now is the only
entry point and doesn't need the user to touch/remove files in
order to change provisioner behavior
* Make zwave devices listen on less network changes.
* Convert more platforms
* Remove printouts.
* Fix copy-paste
* Change default dependent list to empty list
* Fix possible race at startup in mysensors callback
* Update devices via persistence before starting gateway to avoid
two threads calling the same callback at the same time.
* Call add_devices max once per callback
There is no reason for the H to be capitalized. Changing it to lowercase increases consistency with other components and allows for use of the min/max sensor, which throws an error if the units of measurement are not the same.
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* changed info to debug
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added the frontier_silicon component
* trying to satisfy pylint
* fsapi version 0.0.6
* remove white space
* generated requirements
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* trying to satisfy pylint
* changed info to debug
* added the frontier_silicon component
* fsapi version 0.0.6
* generated requirements
* pylint
* moved import requests to the method where it is being used
* add a basic unit test
* cleaned up source code
* added frontier_silicon constant
* added the frontier_silicon component
* added basic test
* added fsapi to requirements_all.txt
* added coverage omit, though a basic test was included
* added MEDIA_TYPE_MUSIC for artist and album
* removed duplicate cons
* switched fsapi call to a property, removed unecessary comment
* detailed docstring for fs_device
* added a space for the info_name - info_text separator
* reduced proeprty (fsapi) access for volume down/up
* Fix: replace influxdb query by another query that is more lightweight and won't timeout
* Fix: replace influxdb query by another query that is more lightweight and won't timeout
* Fix for OSRAM lights connected to hue bridge
Do not send command "effect = none" to OSRAM lights
Osram lights connected to a hue bridge do not seem to handle "effect =
none" very well. Most of the times they jump to the selected color and
then change to red within a second.
Osram lights connected to a hue bridge do not handle xy values outside
of their gamut. Since they just stay at their old color value, handling
the UI is very unpredictable. Sending HSV values to the lights fixes this.
* Add tests for new util methods
* Fast & efficient updates for ZAMG weather data
ZAMG updates on the hour, so instead of checking every half-hour we can
check each minute - only after the observations are taken until
receiving them.
* sensor.zamg: test instead of whitelist for station_id
* Autodetect closest ZAMG station if not given
* ZAMG weather component, based on the sensor
* Review improvements
* Update to new ZAMG schema, add logging
Turns out it wasn't a typo, but rather an upstream schema change. Added
better error handling to ease diagnosis in case it happens again.
* No hardcoded name
- Separate attribs from coffeemaker condition
- Set power units for threshold to mW to be consistent with others
- Adjust on-time labels to be more clear
* Create zwave devices on OZW thread and only add them during discovery.
* Read and write devices dict from loop thread.
* More async
* replace callback with coroutine
* import common function instead of callin git
* Bump qnapstats library to 0.2.3
* Expose the new timeout setting
* Show persistent notification if QNAP fails to set up
This sitaution will usually occur if the server configuration is wrong or the
timeout is set too low. In both cases `api.update()` will fail, which is a
problem because we cannot initialize many of the sensors without having this
data.
* Add new system_temp condition to QNAP sensor
Avoid unhandled exception and stack trace when server closes connection by changing from handle ClientDisconnectedError to DisconnectedError. Also added HttpProcessingError, which was missing.
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connection working again
* Async add devices is working via callback now
* Beginning to interface with PLM library for control and state
* Deal with brightness in 255 levels with library
* Change sub names to match API changes
* Remove PLM-level update callback
* Support dimmable based on underlying PLM device attributes
* Expand to non-light platforms
* Stubs for turn on and off
* Current version of Python library
* Amend to use switch device attributes
* Use asyncio endpoints for control
* Add logging line
* Bump module version to 0.7.1
* Auto-load platforms, display device info/attributes
* Unify method name for getting a device attribute
* Require Current version of insteonplm module
* Import the component function in each platform in the balloob-recommend manner
* For consistency, handle switch state as onlevel just like lights
* Use level 0xff for on state, even with binary switches
Observing the behavior of a 2477S switch, it looks like even the non-dimmable
devices use 0x00 and 0xff for off/on respectively. I was using 0x01 for on
previously, but that yields unnecessary state change callbacks when message
traffic ends up flipping the onlevel from 0xff to 0x01 or 0x01 to 0xff.
* Use sensorstate attribute for sensor onoff
* Move new device callback to devices attribute
* Add support for platform override on a device
* Bump version of insteonplm module
* Default overrides is an empty list
* Avoid calling private methods when doing common attributes
* Remove unused CONF_DEBUG for now
* flake8 and pylint code cleanup
* Move get_component to local function where it is needed
* Update to include insteonplm module.
* New files for insteon_plm component
* Legitimate class doctring instead of stub
* Docstring changes.
* Style changes as requested by @SEJeff
* Changes requested by @pvizeli
* Add @callback decorator to callback functions
* Opportunistic platform loading triggered by qualifying device detection
Instead of loading all the constituent platforms that comprise the insteon_plm
component, instead we defer and wait until we receive a callback for a device
that requires the platform.
* Restore states
* feedback
* Remove component move into recorder
* space
* helper
* Address my own comments
* Improve test coverage
* Add test for light restore state
* Set configurable refresh value delay to 5 seconds
* Revert "Remove configurable refresh value delay, and fix it to 5 seconds"
This reverts commit edc2dc35d165e5e13b0f3cf4df40493a7ce764f1.
* Use default value of 5 sec for refresh, and still configurable
* Make default delay 5secs, but needs to be activated
* Added support for alternate SSH ports in AsusWRT (#4832)
* Always set the SSH port in SSH arguments
* Removed whitespace
* Adding port=22 to the mock calls
* Changed config.get(CONF_PORT) to config[CONF_PORT] per feedback from @pvizeli
* Added forecast functionality to the weather platform, updated OWM to get forecast data
* style fixes
* Changed returned forecast data to a more managable dict
* Fixed line length
* forecast will always be collected, data returned from owm is based on metric setting
* use list comprehension to create the forecast data
* Added forecast data to the weather demo
* Create dict directly in list comprehension
* Minor variable change in weather demo platform
* Convert forecast temperatures in weather component
* set forecast attributes as constants
* Style fixes and tests
* Copied forecast_entry instead of mutating data
* Support aliased owfs sensors
Current implementation does not support OneWire OWFS sensors that are aliased by OWFS alias.txt file:
http://owfs.org/index.php?page=aliases
Assumption is that folder name == sensor address
This change reads the supported families from owfs "family" file and adds both aliased and unaliased sensors.
(this approach also skips the "management" folders.. eg simultaenous, bus, alarm, statistics etc. For example when adding "simultaneous" as sensor (it also has "temperature" file) then owfs crashes)
* Update onewire.py
lint suggested style fixes
* Update onewire.py
Empty line removed
* Update onewire.py
comments removed
* Migrate mqtt to async
* address paulus comment / convert it complet async
* adress paulus comment / remove future
* Automation triggers should be async
* Fix MQTT async calls
* Show that event helpers are callbacks
* Fix tests
* Lint
* First round of not using values directly
* Round two
* lint
* Round four
* Conflict
* Round five
* Update zwave.py
* round six
* Docstring
* flakywakie
* Fetch values in constructor
* Blank line removal
* Set attributes in callback
* Docstring
* Round seven
* Ughgit add homeassistant/components/lock/zwave.py!
* Sloppy code
* Add aurora sensor
* allow custom forecast threshold for aurora binary sensor
* move AuroraGateway functionality to Aurora data object to conform with HA standards
* Add fake support for turn on/off for Apple TV
When the device is "turned off", no requests are sent to the device.
When the setting "start_off" is set to true, the device starts in off
state.
* Fix async comments
* Clean up supported features
* Reconnect robustness, expose connection state.
- Expose connection status as rflink.connection_status state.
- Handle alternative timeout scenario.
- Explicitly set a timeout for connections.
- Error when trying to send commands if disconnected.
- Do not block component setup on gateway connection.
* Don't use coroutine where none is needed.
* Test disconnected behaviour.
* Use proper conventions for task creation.
* Possibly fix test race condition?
* Update hass import style
* Add support for the Open Energy Monitor Thermostat
* Fix linting errors
* Define an update method and local state
* fix linter
* Small tweaks.
Update oemthermostat version, default name and docstrings
* Fail to setup oem platform if connection fails.
* update requirements
* More tweaks to auth and exceptions
* Remove target temp
* Bump pwaqi to 1.4 to fix a typo in the underlying library.
* Update WAQI sensor to use pwaqi 2.0 which relies on AQICN public API.
This is a breaking change as the component now requires 'token' parameter.
* Fix lint
* Core cleanup: two stage shutdown
* fix spell
* fix
* add async logger to close
* change aiohttp to use CLOSE
* address paulus comments
* Fix tests
* Add unittest
* Stop using entity_picture that is known to be bad.
* Only abandon image on 400 or 404 response
* Return is_permanent_failure as a third part of response
* Add debug printout
* Fix lint
* Fix lint
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* Add support for multiple devices to Tado device tracker
* Hound did not agree with my usage of spaces
* Two blank lines were expected
* Keep CONF_HOME_ID in the Tado file
* Make home_id optional
* Work with different API URLs depending on home_id being present
* Remove CONF_HOME_ID from HA's const.py file
* Missed removing CONF_HOME_ID from the import
* Add new sensor/history_stats component
* Add real unit tests
* Code style changes requested for pull request
* Remove time aliases & allow datetime values
* Reformat unit tests
* Remove all async behavior in history_stats
* Change duration format
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* new component telegram_webhooks
* keyboard support in telegram notify
* telegram_webhooks has no tests
* requirement like notify/telegram
* ops, requirements_all.txt needed for travis
* ops, requirements_all.txt is generated by script/gen_requirements_all.py
* check telegram trusted networks in web handler
* raise an event now
* use of hass.config.api.base_url
* more readable
* small cleanups
* Small style change for HA guideline
* fix lint
* revert return to origin
* Support away_mode as permanent hold and hold_mode as temporary hold.
* Add comments to explain code better. Remove indefinite hold preference
to be consistent with 'away_mode'.
* Fix arwn platform discover_sensors
The discover_sensors function can return either singletons or a list
of sensors. However the consumer was always expecting a list. This
fixes it to work in both cases.
* Add custom icons to arwn sensors.
This adds some custom icons for different kinds of weather sensors
that the arwn platform returns. Makes it a little easier to see what's
going on.
* Bumped up version to use 0.1.7 of Russound integration module.
Fixed bug arising from not supporting TURN_ON state (fixes issue https://github.com/home-assistant/home-assistant/issues/5012)
Implemented state support in 0.1.7 such that component state is returned from the actual AMP. (Still uses polling model though).
Tested it with home-assitant users @laf (original developer of the module) and @hofsta. Works fine with their Russounds.
* Made styling / compliance changes and updated correct version of russound module on requirements_all.txt.
* Changed handling of properties to be compliant with https://github.com/home-assistant/home-assistant/issues/4210
(Specifcailly added member variables for state, volume and source to cache these values, and introduced Update() method to set their values).
Now returns None if the selected source index that is returned from russound is greater than the length of the specified source list in the yaml config.
Removed unnecesary comment.
* Removed blank line after docstring.
* Removed updated() in class init and added True paramter to add_devices in setup_platform.
* Dropped the no longer needed self.update()
* Move core servcie from core to components
* add new handler for signals/exception
* Static persistent id
* Move unittest
* fix coro/callback
* Add more unittest for new services
* Address comments
* Update __init__.py
* improve warning message when template is none
* improve error message when template is none
* improve error message when template is none
* improve error message when template is none
* Mailgun notify service
* Update dependency to version 1.3
- The provided credentials (including the domain) are now checked during
startup, as requested by @balloob
- The domain name is now optional
- There's a new config item "sandbox" which indicates whether to use the
sandboxed domain in case the domain is not set
* Fix a few lint issues
* Disable lint check no-value-for-parameter
The nest-cam changes have now been merged into the upstream library, so
there is no need to track a specific branch.
Updating to 3.1.0 also fixes a structure parsing bug I was experiencing.
* Add mysensors device_tracker platform
* Add discovery of device_tracker platforms
* Enable discovery of device_tracker platforms that are not
DeviceScanner.
* Update signature of setup_scanner function in all affected platforms.
* Add test.
* Use discovery for mysensors device_tracker platform.
* Remove gps accuracy
* Small change to core like schema
* fix depency
* Add support for writing ID3 tags to the file for improved display in media players
* Lint and async fixes
* Use mutagen instead of taglib
* Fix tests
* Add fallback for album
* Requested changes
* move import
* Fix album name
* Change default options handling
* Move to member function / minor fix
* fix style
* fix lint
* change mutagen handling
* fix lint / add name to bytesio
* Update __init__.py
* Fix test, some cleanups
* Add mutagen exeption handling, fix tests
* fix mutagen taging
* Revert "Fix hue lightgroups not syncing state (#5702)"
* Use light_id in unique_id for Hue groups
* Make sure HueLight unique_id is unique
* Update hue.py
* Update hue.py
* Update hue.py
* Check config before restarting.
* Make check_config on restart async
* don't check if notification service exists
* Use .communicate()
* Reduce the number of notifications. Add tests.
Previous code used the state topic which is obviously wrong:
- The state topic is already used to select optimistic mode.
- A light with only the state topic but no command topic would still announce the capability.
* Added error checking to the MIMEImage encoding for smtp.py
Added fallback to file attachment rather than inline image for images
without a known MIME
* PEP8 reqs to fix previous commit
* Fix validation of serial port on windows
* Use pyserial to check serial ports.
* Check that persistence file ends with either `.json` or `.pickle`.
* Change fix to not rely on pyserial
* Use generator expr instead of list comprehension
* Change CONF_DEFAULT_COLOR CV type
Changed vol.Optional(CONF_DEFAULT_COLOR, default=DEFAULT_COLOR) from cv.string to cv.ensure_list
This allows the optional parameter default_color to be picked up correctly and to function
the option needs to be specifed as follows:
default_color: [0,255,0]
Solution provided by @scossa2020 in issue #5338https://github.com/home-assistant/home-assistant/issues/5338
* Update hyperion.py
* Support for the Orage Livebox Play TV appliance
* Add liveboxplaytv to coveragerc
* Minor refactoring
* Update requirements
* Adjust comments
* Fix alignment
* Fix some coding-style issues highlighted by Travis CI
* The livebox play TV does not support playing media
* Lint: shorten line
* Remove unused callback function
* Remove redundant backslash
* Implement changes requested by balloob
* Don't error out if channel name or media url could not be retrieved
* Support current program (media title property)
* Remove unnecessary check
* Clean up: Remove another unnecessary check, _CONFIGURING variable and _playing attribute
* Update liveboxplaytv dependency to version 1.4.4
* Fix liveboxplaytv requirement
* Improve media state (support for playing and pause state)
* Update liveboxplaytv.py
* Index events time_fired to improve logbook perf.
* Updated implementation to track schema versions
* Added tests for schema migration support logic
* Rename check_schema to migrate_schema
* Remove redundant input validation which is already accomplished through
defined schemata.
* Rely on defined state attributes for hold mode.
* Remove misleading comment. This comment seems to assume that sleep
mode is a hold; it is a schedule instead. The code snippets in the
comment could never work.
* Remove use of constants for hold mode. Will be made irrelevant
by a planned change by nordlead2005.
* Support for Nuki.io smart locks
* Update requirements and add lock.nuki to .coveragerc
* lint: Re-organize imports
* Schedule a state update instead of calling directly update_ha_state
* Remove update requests altogether
* Make sure there is no IO inside properties
* Fix: nuki lock are all initialized as "lock.unnamed_device"
* Update pynuki to 1.2 to avoid an extra REST API call for each lock init
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* Refactors script/setup_docker_prereqs
Refactors script/setup_docker_prereqs to allow toggling of packages
to being installed
* Adds support for openalpr to Docker
* Updates Dockerfile
Comments ENV directives in order to preserve cache.
* Fixes incorrect position of echo
* Fixes telldus installer by updating apt before pkg install
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* Voice command API.AI. First import
* Fixes suggested by hound
* Fixing comments
* Fix pylint and pydocstyle errors
* Change how speech is defined
Also clean some unused constants, remove card type (not used), define
a message when action is not defined and improve the message when
action is unknown.
* Change how speech is defined
Clean some constants.
Improve error messages.
Delete card type, not used.
* Tests for new Api.ai component
* Use async_add_job to python compatibility. New test to measure response time
* Add async_action option to choose between waiting or not for the action to execute
* Travis-ci needs more time
* Removed timeout tests
* Removed timeout tests
* Added apiai to .coveragerc as specified by PR doc
* initial yeelight based on python-yeelight
* adapt yeelight's discovery code & suppress exceptions on set_default
* Support flash & code cleanups
Adds simple pulse for flashing, needs to be refined.
This commit also includes changing transition from seconds to milliseconds,
and cleans up the code quite a bit.
* cleanup code, adjust default transition to 350
* bump required version to 0.0.13
* Cleaning up and marking todos, ready to be reviewed
* Renamed back to yeelight.
* Removed effect support for now until we have some sane effects available.
* Add "breath" notification for flash, currently hidden behind a False check due to unknown issue not accepting it.
* TODO/open points are marked as such.
* Fix a typo in rgb calculation
* yeelight_<bulbtype>_<mac> for autodetected bulbs
hostname from mdns seems to vary
* Lint fixes, add music mode, fix flash
* Flash transforms now to red and back
* Fix lint warnings
* Add initial music mode.
* remove unused mode logging, move set_mode to turn_on
* Add save_on_change configuration variable
* yeelight: check if music mode is on before enabling it.
* Fix linting, bump required python-yeelight version
* More linting fixes, use import when needed instead of saving the module handle
* Use OR instead of + for features assignment
* Fix color temperature support, convert non-rgb values to rgb values in rgb()
* Fix typo on duration, thanks @qzapwy for noticing
* yeelight: fix issues from review, behave when not available
* Implement available()
* Fix transition to take seconds instead of milliseconds
* Fix default configuration for detected bulbs
* Cache values fetched in update()
* Add return values for methods
* yeelight: kwarg-given transition overrides config, slight cleanups
* change settings back to optional, request update when calling add_devices
* As future version of python-yeelight will wrap exceptions, we can handle broken connections more nicely.
* bump yeelight library version
* Remove unused import
* set the default only when settings are changed and not, e.g., when turned on by automation
* update comment & fix linting
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* Update __init__.py
* Moved logic for advertised ip and port into config class.
* Commenting change for clarity.
* Spacing changes for PEP8
* Spacing Changes for PEP8
* Style Changes
* Bugfix sonos / refactor of sonos function for TTS
* fix unittest
* update service yaml
* restore group of a coordinator
* use group function to evaluate
* fix state flooting
* fix comments
* Implement echo config option for pilight
Pilight switches can get a receive code configured. If so they act on
received codes. In the current implementation "act on" means not only
to set the internal state, but also to send the code again. If the
receiver is directly parred with the switch, to act even if HA is not
running, this causes it to receive the signal twice because the HA
sends it again.
In my case this causes a dimmer to start dimming until I hit the switch
again.
This implements a "echo" argument for the receive codes that let the
user choose if a received signal should result in any sending or not.
If not, only the status of pilight will be updated.
The echo option defaults to True, as this was the default since now.
Simply set it to halse to disable this behaviour.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add documentation to set_state in switch/pilight.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Fix async_volume_up / async_volume_down (#5249)
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* adding a default icon "blind" to a PowerView blinds scene. (#5210)
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Use SHA hash to make token harder to guess (#5258)
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* Bugfix async device_tracker see callback (#5259)
* Add support for NAD receivers (#5191)
* Add support for NAD receivers
* remove self.update() in various methods
* remove setting attributes in various methods
* Change import to hass style
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Revert "Bugfix camera streams (#5306)"
This reverts commit 4b43537801.
Revert "Version bump for kodi dependency (#5307)"
This reverts commit 6abad6b76e.
Revert "Add HMWIOSwitch to sensor, binary (#5304)"
This reverts commit 2c3f55acc4.
Revert "Remove GTFS default name & string change"
This reverts commit 6000c59bb5.
Revert "Update pyhomematic 1.19 & small cleanups (#5299)"
This reverts commit a30711f1a0.
Revert "[sensor] Add Dublin bus RTPI sensor (#5257)"
This reverts commit 1219ca3c3b.
Revert "Bugfix group reload (#5292)"
This reverts commit baa8e53e66.
Revert "Support for TrackR device trackers (#5010)"
This reverts commit f7a1d63d52.
Revert "Bump pywemo version."
This reverts commit dc937cc8cf.
Revert "Upgrade to voluptuous to 0.9.3 (#5288)"
This reverts commit d12decc471.
Revert "Upgrade distro to 1.0.2 (#5291)"
This reverts commit 64800fd48c.
Revert "Don't build Adafruit_BBIO - doesn't work on all platforms. (#5281)"
This reverts commit 9a3c0c8cd3.
Revert "Convert flic to synchronous platform. (#5276)"
This reverts commit eb9b95c292.
Revert "Upgrade to aiohttp 1.2 (#4964)"
This reverts commit e68e29e03e.
Revert "Fix TCP sensor to correctly use value_template (#5211)"
This reverts commit 1cf9ae5a01.
Revert "Cleanup language support on TTS (#5255)"
This reverts commit 3f3a3bcc8a.
Revert "Add last triggered to script (#5261)"
This reverts commit 467cb18625.
Revert "Bump flux_led version and make use of PyPi package (#5267)"
This reverts commit 34a9fb01ac.
Revert "Add support for NAD receivers (#5191)"
This reverts commit 3b59e169f1.
Revert "Bugfix async device_tracker see callback (#5259)"
This reverts commit 71fddd26eb.
Revert "Use SHA hash to make token harder to guess (#5258)"
This reverts commit 922308bc1f.
* Revert "Revert "Bugfix camera streams (#5306)""
This reverts commit 2ee8c44021.
* Update darksky.py
* Remove SPEED_MED from fan
* Add an Amazon Polly TTS platform
* Update boto library version for notify.aws_* platforms to match the tts.amazon_polly req
* Improve log line and add docstring to function
* Simplify config logic
* Remove duplicate logic
* Don't know how this got in here...
* initial options work
* Remove stale config option and only allow supported languages
* Make requested changes
* Polly is only supported in some regions
* Allow filename to contain underscores (for amazon_polly platform name), remove unnecessary default_lang, other small things
* Add options dict to service description
* Update keyboard_remote.py
I added a couple of events: keyboard_remote_connected and keyboard_remote_disconnected, useful to trigger some action (for example: play a sound)
I changed the way the component refers to the keyboard: not by "descriptor", but by name.
The fact is that the udev system doesn't always give a name link in /dev/input/by-id folder and the actual /dev/input/eventX file changes automatically.
For example, if I had my keyboard on /dev/input/event13 and then it disconnected, if something else connects to the system it will get the first input file available, that is /dev/input/event13. If the keyboard then reconnects, it will get /dev/input/event14, thus breaking the configuration.
Now it searches every time for the right input file.
The problem might be that, in case of ha upgrade, the pre-existing configuration won't work. I thing there are some guidelines here, but I am not sure.
I think it's inevitable: the initial idea to use a /dev/input/by-id/ symbolic link was good, but unfortunately it doesn't seem to work with bluetooth devices.
I haven't updated the documentation yet: I'm waiting for some ok about the change in configuration key names.
* Update keyboard_remote.py
That should do the trick.
You are right: device names can be duplicated, thus they're not reliable in case of multiple devices. Unfortunately, the only other information available is the physical address, even more complicated.
But in case you have just one keyboard remote of same model, the name works just fine. I'll put it in the documentation which, once the code is approved, I will promptly update.
* Update keyboard_remote.py
* Update keyboard_remote.py
* Update keyboard_remote.py
* Unwrap logger error
* ASUSWRT: Add IPv6 support when parsing neighbors
The regex for IPv6 should cover most cases, but it doesn't validate
whether IP is correct. It also might fail for some edge cases.
Also, ignore 'duid xx:xx:xx:xx:xx:xx:xx:xx:xx:xx' line in leases.
Closes#2814 - ASUSWRT doesn't support ipv6
* Update asuswrt.py
* Added new platform sky_hub
* added env to virtual environment gitingore
* Removed unuseful imports
* BT home hub 5 renamed to sky hub in the comments
* Added sky_hub to .coveragerc
* Added example configuration in sky_hub docstring
* sky_hub made compliant with test style standards
* homehub functions renamed to skyhub
* Update .gitignore
* Update .coveragerc
* Move isdevice validator under helpers.config_validation.
* Check that all persistence files are set and are unique if any is set
by user. This is necessary to avoid file name clashes.
* Check that a set persistence file has an existing and writable
directory.
* Check that a device is either a valid device file, "mqtt", or a valid
domain name or ip address.
* [image_processing/microsoft_face_verify] face recognition for automation
* Add platform for microsoft face identify
* add unittest for demo
* Add unittest for platform
* add a small sleep before reading the sensor
The read of the sensor might be incorrect if it's read too soon after the setup_input call. It might be isolated to my case where I rely on the the PI internal PULL, but once I added this sleep I never get false initial read. If you think this change is appropriate please merge it.
* Update rpi_gpio.py
* Update rpi_gpio.py
* Update rpi_gpio.py
* Add missing dependency in emulated_hue component.
On first startup after upgrade to 0.36, the emulated_hue componented failed to
start because the http component had installed the modules it depends on, in
this particular case 'aiohttp_cors' was missing.
* Include dependencies for the emulated_hue web server
Emulated_hue uses it's own 'web-server' component to handle hue related
discovery and config, so we need to make sure the required http modules are
made available before we are initialized.
We don't have to depend on the home-assistant http/api component because we do
not need to have the frontend to be initialized to handle emulated_hue, so we
can just import in the same set of requirements as the http component.
* Fix linting error
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* check cec message length when asking physical address (#38) (#38)
* cec turn on/turn off commands instead of power
* cec turn on/turn off commands instead of power
* Using new MaxShutterContact class
* Skip unnecessary function calls
* Added casting for VALUE
* Some renaming to clarify what's happening
* Bumped dependency version
* Bumped version in requirements
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* Fixed crash when lights objects was inited
* Fixed initial value for tellstick lights
* Fixed problem with lights not working with the turn_on action.
* Remove SPEED_MED from fan
* Correctly use the oscillation on/off payloads for MQTT fan
* Add set_direction service documentation
* Correct function name for Wink fans
* Check for existence of the correct topic
* Enable set fan speed in emulated_hue
* features -> functions
* Final emulated_hue fan fixes
* Fix linting issues
* Revert to supported features instead of supported functions
* Fix logic
* Add a test for emulated_hue fan support
* Allow automatic removal of all Hue entities from emulated_hue
* Allow disabling of Hue groups
* Only add device state attributes if they need to be there
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* pylint disable import error
* read_input() changed to return boolean value, according changes in binary sensor
* example configuration in docstring changed to mention direct web link, pylint update
* read_input() updated according review
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* Updated ISY component to not overwrite state_attributes.
The ISY component included an ISYDevice base class that is used by all
of the isy994 platforms. This still overwrote the state_attributes
property instead of the more appropriate device_state_attributes
property. This was also repeated in the isy994 light platform. Both of
these were addressed. This also fixes issue #5428.
* Removed custom state attributes from ISY lights.
The brightness attribute need not be manually reported by the isy994
light platform.
* Removed ISY Node cleanup.
The ISY entities don’t really need to unsubscribe themselves while hass
is shutting down. Because these updates are not sent in a thread, there
is no negative impact from shutting down without unsubscribing. This
greatly speeds up hass shutdown.
* Removed unused attribute from isy994 light platform.
* Cleaned up ISY994 light entity class.
1) Removed the state property. This property is set in the Entity base
class and shouldn’t be overridden here.
2) Set the brightness property. This is the proper way of setting the
brightness for the Light base class.
3) Removed properties that are now unused because of these changes.
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Initial commit of anthemav platform. It loads but has no purpose.
* Now presents a card in the UI but the values aren't real
* Mute and volume polling/setting work now
* Source lists and selection works now.
* Reduce debug logging verbosity
* Support power on/off and skip polling for details if power is off
* Add some static tables to decode numerics from telnet commands
* Add stub for unsupported media_play
* New style anthemav uses native asyncio structure
* Add device callback for asyncio
* This is ugly but it works
* Simplify async setup and abstract class data retrieval
* Implement commands (power on and power off for now)
* Add support for scan_interval and set default to 120 seconds
* Pass-through to package handlers for volume and input selection
* Slight restructuring to satisfy anthemav 0.9
* Load anthemav package from pypi now that it's registered
* Proper app_name from a/v info
* Mispelled word
* media_player/anthemav initial commit of platform requirements
* Philio 3-in-1 Gen 4 zwave sensor needs the no-off-event workaround. (#5120)
* Add print_config_parameter service to Z-Wave (#5121)
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* Conform to Python/project style requirements
* Making pylint happy
* Bring pip requirements in agreement with the code
* Bungled previous update
* Remove unnecessady SCAN_INTERVAL logic
I was unawre that this is performed as part of the normal platform behavior and
it's unnecessary for a platform to independently implement this logic.
* Refactor code based on @armills PR requests
* Re-add media_play stub to avoid traceback
* Align with platform reqirements
* Remove references to SCAN_INTERVAL and clean up _lookup logic
* Add DEFAULT_PORT assignment
* Code style changes and removal of vestigial structures
* CONF_NAME handling changes to allow local override to default from device
* Address PR feedback from @balloob
* Remove media_play function override
It's no longer necesary for the platform to implement a stub media_play
function override now that the Add SUPPORT_PLAY flag #5181 issue has been
resolved and merged into the dev branch.
* Rename callback function to async_ for clarity
* Use async routines for platform methods
* Convert update callback to coroutine for conformity
Underlying anthemav library now properly supports coroutine callbacks instead
of normal functions. Converted the platform callback to a coroutine for
conformance with async operation for the device.
Special thanks to @pvizeli and @armills for their invaluable remedial Python
instruction!
* Further callback refinements
Altered the nature of callback handling based on suggestions from @pvizeli
* True not needed for local push update_ha_state
* Small style fix
After _control_heating() is executed, current_operation() is correctly called but _is_device_active() still reports the old state if the heater switch, at least in my case. The resulting climate state is incorrect until the next refresh, which apparently occurs only when _sensor_changed() gets called (it can be minutes after).
I think the state of the heater switch should be forced to update at the end of _control_heating(), but I don't know how to do that...
A simple sleep() fixes it, but obviously is just a temporary workaround, I'm not really expecting this PR to be actually committed, unless there's no other solution.
* Added tado device tracker
* Added tado device tracker to .converagerc
* Updated docs
* Code formatting and removed unused import
* Code formatting and removed unused import
* Respected the lint line length
* Respect pydocstyle rules
* Respect the lint line limit length
* Fixed reviewer feedback
* Changed the tracker to support async
* Respect the New line end of file rule
* Update .coveragerc
* Improved x10 state monitoring
* Improved x10 state monitoring
* Use update mthod to fetch state change
* Use update mthod to fetch state change
* Use update function to fetch status
* remove temp file
* Add doc string to update method
* denonavr: Expose input as title when in non playing modes
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denon: Pop from the intended end of the list
Pop from front of list, so we start with NSE0, then NSE1X and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Don't provide broken media_url's
Only return a media_url if we're in a state that might provide one.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Only expose player support when in a player mode
This changes so the denonavr only exposes the media player support, when
in a mode that supports media playing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add listing and selection of available MPD playlists through input source UI.
* MPD support updating playlist list on the fly as well as at turn-on.
* Added no_throttle to force playlist update on mpd power cycle.
* Added kwargs signature to get Throttle working right.
* Initial commit of discord notification component
* Fixed error where script added extra entries to .coveragerc
* Cleaned up code
* Compliance to PEP8
* removed dependencies
* readded dependencies
* changed name of client id to token for configuration
* Changes for Hound
* Incorporated Review Feedback
* Review feedback
* Updated requirements file
* Check compliance
* Introduced Amcrest camera sensors
* Makes script/gen_requirements_all.py happy
* Bump Amcrest version across all components
* - Adjusted scan_interval to 10 seconds
- Filtering HTTPError and ConnectTimeout exceptions
- Removed @Throttle decorator
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
* Made target temperature sensitive to auto mode
* Used current_operation instead of operation_mode
* When not in auto_mode, the temperature is sent to set_temperature
* Low and high targets are switched in the call to set_temperature.
* Missed on current_operation. Use STATE_AUTO.
* Remove incorrectly checked in directory.
* Updated set_temperature based on Martin's feedback.
* Use ATTR_TEMPERATURE from const.py
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
Removing redundant throttle decorator on update method. This ensures the existing 'cache-value' config option is respected. Also, UPDATE_INTERVAL is renamed to DEFAULT_UPDATE_INTERVAL for clarity.
* Add support for direct MJPEG streams from Amcrest cameras
The previous implementation relied on using snapshots from the camera. However,
some Amcrest models cannot keep up with the large number of requests and
instead timeout, resulting in no video stream. These cameras do provide MJPEG
streams though, so this commit adds the option to use these instead of creating
one from snapshots.
Unfortunately, some cameras on newer firmwares do not support MJPEG streams at
high resolution - only at low resolution.
By providing users with both a `resolution` and `stream_source` option, we can
allow them to choose whichever combination works for their particular model
and firmware version.
* Close the stream instead of releasing it
* Close stream without creating a task
* Handle client aborts
* fix lint
* Added Yandex SpeechKit TTS
* Added test stub
* Added two test and added property for yandex tts
* Copy all test from voice rss
* Added test vith different speaker and code style changes
* Added new line to end of file
* Url format replaced with url_params
* Fix typo
* Auto-config for `sensor.bom`
Deprecate (but still support) the old two-part station ID, and move to a
single `station` identifier. Any combination of these, including none,
is valid; most results in downloading and caching the station map to
work out any missing info.
* Add `weather.bom` platform
Very similar to `sensor.bom`, but supporting the lovely new `weather`
component interface. Easier to configure, and does not support the
deprecated config options.
* Review improvements to BOM weather
Largely around better input validation.
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
Added support for additional optional configuration
arguments:
to send to vlc.
It is useful for special configurations of VLC.
For example, I have two sound cards on my server, so I defined two vlc media players:
media_player:
- platform: vlc
name: speaker_1
arguments: '--alsa-audio-device=hw:1,0'
- platform: vlc
name: speaker_2
arguments: '--alsa-audio-device=hw:0,0'
This way, by specifying the corresponding entity_id, I can send the output to the desired speaker.
It is also useful for TTS.
* Revert #4791 and fixes#4696
* Update influxDB based on PR comments
* Add migration script
* Update influxdb_migrator based on PR comments
* Add override_measurement option to influxdb_migrator
* Rename value field to state when data is string type
* Fix influxdb cloning query
* Remove build dirs from docker image to keep the layers small
* Create setup_docker_prereqs script to prepare docker env
* Add documentation for required packages, drop colorlog and cython in first step of Dockerfile since it will be installed later on anyway. Drop libglib2.0-dev and libbluetooth-dev
* Also remove early install of colorlog and cython in Dockerfile.dev
* Re-add libglib2.0-dev and libbluetooth-dev for Bluetooth LE
* Add support for Zengge Bluetooth bulbs
Adds support for the Zengge Bluetooth RGBW bulbs. These are sold under a
number of brands, including Flux. The bulbs do not support full RGBW
control - they turn off the RGB LEDs when white is enabled, and vice versa.
* Update zengge.py
* Initial commit for Wink fan support
* Added fan to discovery list
* Raise NotImplementedError and fixed is_on
* Added speed property
* Update __init__.py
* eq3btsmart: support modes and clean up the code to use climatedevice's features
* eq3btsmart: re-add device state attributes
adds reporting for is_locked, valve, window_open and low_battery,
exposing everything the device reports currently.
* eq3btsmart: bump version req
* eq3btsmart: fix a typo in mode name, report unknown when not initialized
* eq3btsmart: depend on newly forked python-eq3bt lib, pythonify states
* [Device Tracker] Xiaomi Mi Router integration as device tracker
This device tracker allow to track device connected to Xiaomi Router.
Parameter: host, username (default admin) and password.
* [Device Tracker] Addition of Xiaomi device tracker file in coverage
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add Lannouncer notify component
* Send message by opening a raw TCP socket instead of using requests. Cleanup of method validation.
* Use 'return' instead of 'return None'
* Fix#5188 by Closing the stream instead of Releasing it
Closing just terminates the connection, release attempts to download all the contents before closing. Since the MJPEG stream is infinite, it loads and loads content until the python script runs out of memory.
Source: 50b1d30f41/aiohttp/client_reqrep.py (L668-L672)
* Update mjpeg.py
* platform set-up begin components
* lights seem to be getting set up properly, not sure why they aren't being added...
* typo
* Dependencies line
* toggle working
* toggle working
* added the switch to insteon_local
First commit hope to test tonight or in the morning
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* move dependency declaration before import?
* Move dependencies in Switch
* Update insteon_local.py
* wait for response
* switched the while to an if
switched the while 'cmd2' not in resp: to an if 'cmd2' not in resp: this seems to have the updater working
* Switched the while sleep loop to an if
switched the wile cmd2 not ins resp to be if cmd2 not in resp seems to be working.
* Update insteon_local.py
* import statement
Updated the import statement to import the instance of the insteon_local component not the hub Instance.
* updated import and the device assignment
update the import to import the instance of the insteon_local component not the hub.
* more changes to support the import change
* more changes to support the import change
* change to hass.data and add loop logic
* &&
* Update insteon_local.py
* Update insteon_local.py
* logic fixes and throttle
* reduce polling time
* brightness support
* import util
* hound fixes
* requirements file
* more hound fixes
* newline
* newline weirdness
* lint fixes
* more lint fixes
* switch state
* Update insteon_local.py
* log cmd2 for debugging
* assume success
* remove check for none
* fix comments
* fix comments again
* fix comments, add fixed version of lib, add support for timeout, add support for port, handle invalid login and connection problems
* fix logging exception
* fix hounceci-bot errors
* fix hounceci-bot errors
* requirements fix
* unique-id changes
* make dimmer off use saved ramp rate
* configurator working for lights
* configurator working for switches?
* configurator working for switches?
* include model names and fix lint errors
* lint fix
* fix exception order
* lint fixes
* fix lint errors
* update to use insteon local 0.38
* fix device id
* move status check to library
* move status check to library
* add SKU to setup
* lint fixes
* requirements
* linting
* Refactor of Squeezebox connection code
* Refactor of Squeezebox connection code
* Typos
* Make Python 3.4 friendly
* Addressing comments
* Improving docstring
* Using discovered port
* Style better
* Accept new disco object
* Revert "Accept new disco object"
* Make it obvious that port isn't discovered yet
* Flake8. ;)
* Add teardown method to pilight tests
This is necessary to stop the HomeAssistant instance that was started
in the setUp method. Without this there happen random test failures.
This is necessary to stabilize the tests for PR #5045.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Update test_pilight.py
* Re-enabled Weather Sensors for the ISY component.
As the ISY component had been updated to support newer components and
have better UOM support, the support for ISY’s weather module was
dropped. This adds that support back into Home Assistant.
* Cleanup of the ISY Weather support.
Cleaned up the for loops used to generate nodes representing weather
data from the ISY. Moved the weather_node named tuple to the top of the
file so that it can be more easily identified.
* Update isy994.py
* Update scan_interval and interval_seconds max to 1 day vs. 60 seconds
* Format fixes
* Add docstring on unittest.
* Added and implemented new async_track_time_interval helper.
* Format fixes, removed unused import.
* Undid whoops on unsub_polling.
* Updated unit tests for scan_interval.
* Added unit test for track_time_interval.
* Allow other forms of time interval input for scan_interval and interval_seconds
* Update keyboard_remote.py
I changed os.path.isFile() to os.path.exists: as far as I know isFile doesn't work with device files. At least on my Ubuntu it wasn't working.
Then I added some error control in case the keyboard disconnects: with bluetooth keyboards this happen often due to battery saving. Now it reconnects automatically when the keyboard wakes up.
We could fire an event to hass when the keyboard connects-disconnects, maybe I'll do this later.
We should also manage errors due to permissions problems on the device file, or at least give some info in the docs about how to allow HA to grab control over an system input file.
I'm sorry if my coding isn't up to some standard practice I'm not aware of: I'm new to HA and to python itself, I'm just trying to be of help.
Gianluca
* Update keyboard_remote.py
I changed some other few things.
Not the component gets loaded even if the keyboard is disconnected. When it connects, it starts to fire events when keys are pressed.
I also added a sleep(0.1) that reduces a lot the load on the CPU, but without many consequences on key pressed detection.
* Add a volume to store the tox cache on the host. This gives quite some speed boost when running lint_docker and test_docker.
* Only map .tox directory for cache.
* Spread the traffic to yr.no servers and remove yr.no from the default config
* use unique address for yr.no
* update yr tests
* Wait 10 min extra before requesting new data
* Update config.py
* Update yr.py
* Add support for Tikteck Bluetooth bulbs
Adds support for the Tikteck RGBW BLE bulbs. These don't provide "true" RGBW
support - at a certain point in RGB space, the white LEDs turn on. Each bulb
has a specific key that needs to be extracted from the Android app.
* Update tikteck.py
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Better async/threading behavior for tellstick.
* Fix lint/style checks.
* Use hass.async_add_job
* Add ability to set rpi_rf `tx_repeats` attribute
Uses the current `rpi_rf` default of 10
Closeshome-assistant/home-assistant#5069
* Use `signal_repetitions` instead of `repeats` for consistency
Adding the device_id key to the bevice tracker component allows selecting the bluetooth device to use in case the default device does not have BLE Capabilities
Rather than rely on base_url being unconfigured and therefore be
set as the host ip in the api component, get the local ip directly.
Use server port from the http component instead of the api component
where it will be None if base_url is set.
Change the exception catch meant to check for ipv4 vs ipv6 to wrap the
address encoding only instead of the zeroconf service info declaration.
* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Allow bower install of frontend components as root. Needed for frontend development in docker since everything runs as root in the docker image.
* Improve development workflow in docker
* Use LANG=C.UTF-8 in tox. Fixes installation of libraries with UTF-8 in it's readme.
* Install mysqlclient psycopg2 uvloop after requirements_all.txt again, but with a --no-cache-dir this time. Allows bootstrap_frontend to be executed in a different path like the other scripts.
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* ecobee_set_fan_min_on_time: fix issue using 'entity_id' field and add service field help text
* climate.ecobee: add 'resume_program' service
* Add default value for resume_all and correct entity_id field name reference
* Allow to specify TTS language in the service call.
* Allow to specify TTS language in the service call.
* Respect 79 char limit
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Change language to be optional parameter of *get_tts_audio
* Change language to be optional parameter of *get_tts_audio
* Respect 79 char limit
* Don't pass "None
* Use default of "None" for TTS language
* Use default of "None" for TTS language
* Don't pass "None"
* Change TTS cache key to be hash_lang_engine
* Change language from demo to en
* Fix wrong replace
* Add sensor for International Space Station
* Change two sensors to one with attributes.
* Fix due to comments in HA PR. Thanks !
* Update Requirement
* emulated_hue: fix alexa "device not responding"
we need to set the brightness to 100 for devices that only turn on
* emulated_hue: dont override brightness for scenes/scripts
* emulated_hue: python and semi-colons
* emulated_hue: fix output brightness level
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Fix Sonos album art for non-radio streams
* Revert "Fix Sonos album art for non-radio streams"
This reverts commit d71502d18f.
* Fix Sonos album art for non-radio streams
* Move art existance check into _format_media_image_url
* Add support for the Sonarr URL Base setting
For those of us who have sonarr hidden behind reverse proxy under a path, we need to be able to pass the path
Adds urlbase: XXX to the sonarr yaml... Match it to what you have set in Sonarr (Settings>General>URL Base)
* Fix line lengths
* Fix trailing white space caused by last change
* Removing use of len()
* Updates TP-Link switches dependent module
Refactors code to use the new module API
* Set TP-Link Switch name from the device settings
If no name has been set in the configuration file the name set on the device will be used
* Removes default name for TP-Link switch
Fallback to device alias now works properly
* Removes logging
* Updates comment to denote support for HS200 switch
Updated the schema check to accept any string
Search custom sources in app title and app id
The makes the short list redundant and thus removed
Tested by adding livetv, netflix, youtube, makovod and others
This is also compatible with the list that was supported till now
so current users won't see any difference.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Remove try/except to connect to the TV
* Update panasonic_viera.py
* Update panasonic_viera.py
* Add basic property details for Nest hvac_state
* Add the hvac_state sensor
* Update requirements and remove trailing whitespace
Clean up the multiline docstring
Adding a space between summary and description
* Removing the hvac_state as a property on the nest climate
* Update nest.py
6-12-09 18:12:30 homeassistant.core: Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/usr/lib/python3.4/asyncio/tasks.py", line 237, in _step
result = next(coro)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity_component.py", line 386, in _update_entity_states
yield from update_coro
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity.py", line 240, in async_update_ha_state
self._attr_setter('entity_picture', str, ATTR_ENTITY_PICTURE, attr)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity.py", line 307, in _attr_setter
value = getattr(self, name)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/components/sensor/wunderground.py", line 176, in entity_picture
url = self.rest.data['icon_url']
TypeError: 'NoneType' object is not subscriptable
* Added Volume Set option and autodiscovery functions to Denon AVR receivers
* Corrected issues in SSDP discovery and in case no host could be discovered
* Corrected discovery handling / added denonavr to discovery platform
* No needless discoveries anymore / add_devices() with list instead of loop
* TTS Component / Google speech platform
* Change file backend handling / cache
* Use mimetype / rename Provider function / allow cache on service call
* Add a memcache for faster response
* Add demo platform
* First version of unittest
* Address comments
* improve error handling / address comments
* Add google unittest & check http response code
* Change url param handling
* add test for other language
* Change hash to sha256 for same hash on every os/hardware
* add unittest for receive demo data
* add test for error cases
* Test case load from file to mem over aiohttp server
* Use cache SpeechManager level, address other comments
* Add service for clear cache
* Update service.yaml
* add support for spliting google message
* Display error message instead of exception
Display error message in log instead of stack trace.
(Usually happens when a server is already running at the same port.)
* Update __init__.py
Better error handling when reading SSL certificate
* Update __init__.py
* Update __init__.py
* Bump python-nest to fix issue with Nest Cam without activity zones
* bump to include fix python-nest dependency with hvac_state
* regenerate requirements_all.txt
* Add media position support and trailer type to Emby
* Adjustments to mitigate TypeError
* Simplify media_position property
* Update handling when data isn't available
* Update emby.py
- Implemented support for covers and dimmable lights.
- Removed global object, use hass.data.
- Disabled polling via update.
- Inherit from common TelldusLiveEntity device.
- Configurable polling interval
- Use https API endpoint
- Use tellduslive package
* Add debug level logging of messages in denon
* Added media stop for Denon AVR Media Player
* Sort source list
* Rework input selection for Denon AVR
This reworks the input selection, adding more modes and making it so
that the media controls are only announced in modes where they actually
makes sense.
* Added real media info for Denon AVR Media modes
* Read more configuration from denon devices
This reads network name, and overrides the local name with that.
This also reads the source names and reconfigures the input list to
those names, and also reads the source deleted list and removes the
inputs that are set to deleted in the device.
* Discover and handle max volume in Denon media player
* Rework source discovery in Denon media player
This uses SSFUN as authorative source for which sources that we should
present.
* Add support for Hue LightGroup entity
* Don't filter on LightGroup and add properties for a group
* Reuse code from HueLight in HueLightGroup
* Remove HueLightGroup and add is_group variable to HueLight
* Make linter happy
* Update light or lightgroup state when a new state is available
* Use schedule_update_ha_state() to schedule the state update. Drop new_lightgroups and use new_lights instead.
* code style fix
* Improving Battery info
Improving battery status info (to reflect NetAtmo API documentation and change deprecated DeviceList for WeatherStationData
* Fixes from previous update
Fix the hound issue.
add battery_lvl, WindAngle_value, GustAngle_value, rf_status_lvl, wifi_status_lvl
* Ecobee autoAway Event
* Update ecobee.py
Checking if event['running'] true is pointless because if false event['type'] will equal template and when true type will only be 'hold' or 'autoAway' so I've removed this check from the statement
* Bump python-nest to fix issue with Nest Cam without activity zones
* bump to include fix python-nest dependency with hvac_state
* regenerate requirements_all.txt
* Prevent emulated hue discovery
Test for “HASS Bridge” in discovery info, pass if found, else try and
setup the bridge.
* Solved coding error
Duplicate commands and return false added for component.
* Pilight: dont protocol as list in COMMAND_SCHEMA
As described in bug #4637 the protocol should not be wrapped in a list
in the spec of COMMAND_SCHEMA because this causes the component to
never successfully match any received rf code.
As pointed ot in PR #4639 the easiest way to do this, is to not derive
COMMAND_SCHEMA from RF_CODE_SCHEMA and specify protocol as simple
string there.
This fixes bug #4637.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Pilight: Add "unitcode" to command schema.
This adds "unitcode" to the COMMAND_SCHEMA. It is used for example in
the brennenstuhl protocol of pilight.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
This adds support for the scene component to handle input_select
devices and set their options.
This fixes bug #4673
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* Add support for telldus in the Docker image. Start with -v /tmp/TelldusClient:/tmp/TelldusClient -v /tmp/TelldusEvents:/tmp/TelldusEvents
* Merged telldus install with the others
* Clean up indenting
* Stream apt-key
* ensure_list
* CONF_ID is not required configuration for enocean lights
* Use vol.All(cv.ensure_list, [vol.Coerce(int)]) as suggested in pull request review
* Fix line too long
* change unifi dependency to pyunifi
* Change dependency to fix#4336
* Run gen_requirements_all.py script
* Changed import statement to reflect new package
* Updated test_unifiy.py with different module
* Update requirements_all.txt
* Add support for Netatmo Welcome Tags
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add size parameter for WelcomeData
* minor fixes
* Add Throttling mechanism for update event
This will prevent to reach the API limit
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Change scan interval for Netatmo Binary sensors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Minor fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update netatmo.py
* Added component for flic smart buttons.
* Apply home-assistant coding styles.
* Fixed flic configuration.
* Made logging for scanning for new buttons less verbose.
* Fixed flic event data.
* Follow async conventions.
* Added new requirements to requirements_all.txt.
* Added flic component to .coveragerc
* Updated flic threshold configuration key names.
* Flic devices are now removed when they disconnect.
* Include review feedback.
* Fixed stopping of clients in flic component when home assistant is stopped.
* Updated flic component by integrating input of #4738.
Use library method to determine click type. Merge three click events into single one with click_type parameter.
* Use a single client for both handling click events and scanning for new buttons.
* Renamed flic ‘auto_scan’ configuration variable to ‘discovery’ using HA constants.
* Add sensor for reading ZAMG weather conditions
* Add to coveragerc; Correct some doc style problems
* More doc fixes
* More doc fixes
* Lose license and whatever.
* Don't return UNKNOWN for unknown variables
* Verify that the configured station id is actually one in the data set.
Don't warn about unknown stations, this cannot happen any more as the configuration parser now checks that.
This could still happen if the data set is incomplete though ...
* Clean up imports
* Clarify comment on throttling interval
* Base zamg sensor on Entity, not WeatherEntity, and delete unused code
* Fix formatting nits from flake8
* Use ATTR_FRIENDLY_NAME, clean up imports, remove unnecessary indirection.
* Use {}.format() instead of "" %
* Re-add unit of measurement that got lost somehow
* Use guard clauses instead of if-matroshka.
Wrap requests.get() in try/except for RequestException.
* Huh, how did this happen? White space corrections...
* Add sensor for reading ZAMG weather conditions
* Add to coveragerc; Correct some doc style problems
* More doc fixes
* More doc fixes
* Verify that the configured station id is actually one in the data set.
Don't warn about unknown stations, this cannot happen any more as the configuration parser now checks that.
This could still happen if the data set is incomplete though ...
* Lose license and whatever.
* Don't return UNKNOWN for unknown variables
* Clean up imports
* Clarify comment on throttling interval
* Base zamg sensor on Entity, not WeatherEntity, and delete unused code
* Fix formatting nits from flake8
* Use ATTR_FRIENDLY_NAME, clean up imports, remove unnecessary indirection.
* Use {}.format() instead of "" %
* Re-add unit of measurement that got lost somehow
* Use guard clauses instead of if-matroshka.
Wrap requests.get() in try/except for RequestException.
* Huh, how did this happen? White space corrections...
* Precipitation actually is a float, good it rained today
* Logger needs no module visibility
* Do not name sensors with _ to be in line with the other weather sensor platforms.
* Remove manually set friendly_name
* comment format police
* Less comments
* Update zamg.py
* ensure_list
* CONF_ID is not required configuration for enocean lights
* Use vol.All(cv.ensure_list, [vol.Coerce(int)]) as suggested in pull request review
* Fix line too long
* initial commit
Previous work included with no history. Sorry, I was figuring out how to use git, branches and deal with open source projects. At this point this is a working switch but with the shortcomings of each of the 8 ports causes a network query. This needs to be rewritten so that the SwitchDevice is part of a larger device group that is only queried once, saving traffic and preventing the small device from timing out.
* Device polls independent of switches now
Used anel_pwrctrl.py as a basis to extract the per-switch polling out to per-device so it can be trottled properly. Likewise, no longer touching the device independently for relay status AND relay name. Getting them both from the same statuslist() return.
* Final comments and tweaks
Lowered cycle and update time since the device update is working so well now. Effectively no timeouts anymore.
* Added dlipower to requirements
homeassistant.components.switch.digitalloggers
* Tox fixes
pydocstyle updates
* More tox errors
* Yet more tox
Removed useful future TODO and helpful details on the structure of the statuslocal list.
Good catch on not initializing .update(), though it worked.
* Blank line fix
* Added file to .coveragerc
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Add source_list to universal media player
* Expanded attirubte and command support for UMP
Added support to the universal media player
for the following:
Volume Set
Current Source
Set Source
Current Volume
The goal is to facilitate a single-card media player
that includes source selection and setting the volume
of the receiver.
Example setup:
```
media_player:
- platform: universal
name: Media Center
children:
- media_player.kodi
- media_player.cast
commands:
select_source:
service: media_player.select_source
data:
entity_id: media_player.receiver
volume_set:
service: media_player.volume_set
data:
entity_id: media_player.receiver
volume_mute:
service: media_player.volume_mute
data:
entity_id: media_player.receiver
turn_on:
service: homeassistant.turn_on
data:
entity_id: media_player.receiver
turn_off:
service: homeassistant.turn_off
data:
entity_id: media_player.receiver
attributes:
state: media_player.receiver
is_volume_muted: media_player.receiver|is_volume_muted
volume_level: media_player.receiver|volume_level
source: media_player.receiver|source
source_list: media_player.receiver|source_list
```
* Remove print statements
* Change service call back to use call_from_config
* Modified service calls to use template data
* linting fixes
* Add tests
* linting fices
* More pylinting
* Add option to hide the group card switch
* Disallow control of hidden group switches
* Revert "Disallow control of hidden group switches"
This reverts commit 75e5ddfe30.
* Changed hide_switch to control
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Fixed attributes that are lists cuasing invalid influx syntax
* Added bool and fixed mixed data type issue
* Fixed changing nearly all data types to float causing some worse influxdb errors. whoops
* Added line to end of file
* Extending efergy component for get the amount of energy consumed
* Changing units from kW to kWh
* Chaning units for Instant Consumption from kWh to kW
* Adding timeout for get and removing pylint config
* Update efergy.py
* Add MAC vendor lookup for device_tracker.
* Test vendor mac lookup and fix device attribute.
* Generate requirements.
* Style.
* Use hyphen instead of underscore to satisfy 'idna'.
https://github.com/kjd/idna/issues/17
* Resort imports.
* Refactor macvendor to use macvendors.com API instead of netaddr library.
* Test vendor lookup using macvendors.com api.
* Remove debugging.
* Correct description.
* No longer needed.
* Device tracker is now an async component. Fix ddwrt tests.
* Fix linting.
* Add test case for error conditions.
* There is no reason to retry failes vendor loopups as they won't be saved to the file anyways at that point.
* Sorry, bad assumption, this only made things worse.
* Wait for async parts during setup component to complete before asserting results.
* Fix linting.
* Is generated when running 'coverage html'.
* Undo isort.
* Make aioclient_mock exception more generic.
* Only lookup mac vendor string with adding new device to known_devices.yaml.
* Undo isort.
* Revert unneeded change.
* Adjust to use new websession pattern.
* Always make sure to cleanup response.
* Use correct function to release response.
* Fix tests.
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* readded after rebase
* cleaning up style errors
* modified .coveragerc
* moved import statements
* added more debug logging
* Added URL encoding of token received from Logitech
* Corrected import for python 3
* new pyharmony version
* new pyharmony version
* remote tests
* only write config file if not present or sync service is called
* more tests
* more tests
* bumped pyharmony version to work with new auth
* bumped pyharmony version to work with new auth
* style corrections
* harmony local auth and remote demo platform
* style fix
* PR refinements and permission issues
* forgot a blank line
* removed sync test from test_init
* removed sync test from test_init
* visual indent
* send_command test in demo platform
If the mpd client ran into an socket timeout, the socket will raise an
OSError on every further request. This adds OSError to the list of
excptions, that causes a client reconnect.
This fixes#4650
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
In media_content_id() the "id" of the current song was returned. as
stated in bug #4652 the id is only the Tracklist-Id in the current
tracklist and is omitted if the track is not part of a tracklist (what
caused the bug in the first place).
To match the semantics described in the dockstring, to return a "Content
ID", this chooses the filename of the current song as id and returns
it.
It also uses get() instead of [] to prevent KeyError.
This fixes bug #4652
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add channel switching for philips tvs.
* Disable track buttons when not watching tv.
* Undo isort config.
* Yes it does.
* Just testing some assumption on hound's flake8 behaviour.
* Revert "Just testing some assumption on hound's flake8 behaviour."
This reverts commit ff9940b39e.
* poke
* Introduced support to Amcrest IP Cameras
* Fixed lint issues
* Fixed requirements test
* * Implemented test to verify crendentials during camera setup
* Added persistent_notification in case of error when during Amcrest setup
* Homematic update with HomematicIP/HomematicWired support and multible connections
* fix bug in virtualkey service
* create new service & cleanups
* fix lint
* Pump pyhomematic 0.1.18
* Default dimmable brightness to 255 from 100
Full brightness for ISY dimmers is 255. The current 100 value turns dimmer switches on to just under half brightness. Probably just an oversight from the Sept implementation.
* Brightness change for turn_on, ramp for turn_off.
Per discussion with Teagan42 and jbcodemonkey, the brightness should rightfully be None and not an explicit value. There is a continuing issue that the ISY modules don't respect HA's brightness customization values. A new issue will be opened for this.
Additionally, turn_off was using ISY's fastoff() which didn't respect the ramping time. The default behavior should just be off().
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Initial implementation of DuneHD media player component based on pdunehd.
* Major: avoid update() in property fetch,
Major: implement source support,
Major: single device per media player instance,
Major: support for volume / mute controls
* Pythonify pdunehd.
Support media_title.
* Fix pylint.
* Further pylint.
* docstring
* Formatting and indentation.
* Change indentation to spaces.
* Update coverage and recorded requirements before PR.
* Further pylint / fake8 / pydocstyle fixes.
* Implement next / prev track,
Properly decode blu-ray playback,
Attempt to decode media title
* Fix play / pause
Linting
* Update requirements.
Fix lint.
* Fix lint and syntax error
* Yet more linting.
* Yet more linting.
* Fix lint: line too long.
* Force update of HA state.
Fixes https://github.com/home-assistant/home-assistant/issues/4389
The USB address of these devices periodically changes, causing
home-assistant to fail to read the temperature data. This PR fixes this
by re-reading the available devices on failure. I've been running this
for several days and for the first time have consistent temperature
data without having to restart home-assistant.
* Add exception handling to request call to prevent
failure in setup_platform if host is down
* update for comments
* update test for state being none
* remove unused import
* Added support for media_position property to media_player + implementation for sonos.
* Pla yback progress now updates without needed state transitions in HA.
* Linting fixes
* media_position_update_at property is now a datetime.
* Minor fix.
* Linting fixes.
* Add support for light effects
* Move PLATFORM_SCHEMA changes in light to mqtt_template
* Add effect validation
* Add unittests
* Add light effect to demo and unittests
* Use cv.string for config validation
* Use cv.ensure_list for config validation
* Fix typo
* Remove unused exception management for effect
* start nestcam support
* start nestcam support
* introduce a access_token_cache_file
* Bare minimum to get nest thermostat loading
* occaisonally the image works
* switch to nest-aware interval for testing
* Add Nest Aware awareness
* remove duplicate error logging line
* Fix nest protect support
* address baloobot
* fix copy pasta
* fix more baloobot
* last baloobot thing for now?
* Use streaming status to determine online or not. online from nest means its on the network
* Fix temperature scale for climate
* Add support for eco mode
* Fix auto mode for nest climate
* update update current_operation and set_operation mode to use constant when possible. try to get setting something working
* remove stale comment
* unused-argument already disabled globally
* Add eco to the end, instead of after off
* Simplify conditional when the hass mode is the same as the nest one
* away_temperature became eco_temperature, and works with eco mode
* Update min/max temp based on locked temperature
* Forgot to set locked stuff during construction
* Cache image instead of throttling (which returns none), respect NestAware subscription
* Fix _time_between_snapshots before the first update
* WIP pin authorization
* Add some more logging
* Working configurator, woo. Fix some hound errors
* Updated pin workflow
* Deprecate more sensors
* Don't update during access of name
* Don't update during access of name
* Add camera brand
* Fix up some syntastic errors
* Fix ups ome hound errors
* Maybe fix some more?
* Move snapshot simulator url checking down into python-nest
* Rename _ready_to_update_camera_image to _ready_for_snapshot
* More fixes
* Set the next time a snapshot can be taken when one is taken to simplify logic
* Add a FIXME about update not getting called
* Call update during constructor, so values get set at least once
* Fix up names
* Remove todo about eco, since that's pretty nest
* thanks hound
* Fix temperature being off for farenheight.
* Fix some lint errors, which includes using a git version of python-nest with updated code
* generate requirements_all.py
* fix pylint
* Update nestcam before adding
* Fix polling of NestCamera
* Lint
* Expose isort preferences for tools.
* Adhere to pylints sorted imports requirement.
* More documentation, set typing in between stdlib and 3rd party.
This lets components declare their precision for temperatures. If
nothing is declared, we assume 0.1 C and whole integer precision in
F. Currently this supports only WHOLE, HALVES, and TENTHS for
precision, but adding other precision levels is pretty straight
forward.
This also uses proliphix as an example of changing the precision for a
platform.
Closes bug #4350
* Remove fixed throttle for binary_sensor.command_line and sensor.command_line since the scan_interval is configured trough YAML since #1059
* Clean up imports
* Add SCAN_INTERVAL=60 to put default scan_inteval back to 60
* Add websocket API
* Add identifiers to interactions
* Allow unsubscribing event listeners
* Add support for fetching data
* Clean up handling code websockets api
* Lint
* Add Home Assistant version to auth messages
* Py.test be less verbose in tox
* Move HTTP to own folder
* Break HTTP into middlewares
* Lint
* Split tests per middleware
* Clean up HTTP tests
* Make HomeAssistantViews more stateless
* Lint
* Make HTTP setup async
* #4421 - Forced icons to be displayed via SSL to avoid Mixed Content warnings
* Fixed houndci-bot whitespace
* Using regex to replace http:// for https://
* Created assert test to verify https translation
* LiteJet: Unit tests and new trigger options held_more_than and held_less_than.
* Unit tests for the LiteJet component and associated platforms. Coverage is almost 100% -- just misses one line.
* The automation LiteJet trigger returns an empty "removal" function to ensure the automation base is happy with it. The pylitejet library doesn't actually support a real removal.
* The automation LiteJet trigger can detect hold time and act appropriately to support things like short tap or long hold.
* LiteJet: Fix indent in unit test source code.
* LiteJet: Fix test_include_switches_* unit tests on Python 3.5
* LiteJet: Remove wait for state existence from unit tests. Recent fixes to discovery make this no longer necessary.
* Removed raise statement to don't polute the user log.
Only the error message should be displayed.
Nov 22 11:28:32 tchellopi hass[20138]: 16-11-22 11:28:32 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved
Nov 22 11:28:32 tchellopi hass[20138]: Traceback (most recent call last):
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/tasks.py", line 241, in _step
Nov 22 11:28:32 tchellopi hass[20138]: result = coro.throw(exc)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 386, in _update_entity_states
Nov 22 11:28:32 tchellopi hass[20138]: yield from update_coro
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity.py", line 213, in async_update_ha_state
Nov 22 11:28:32 tchellopi hass[20138]: yield from self.hass.loop.run_in_executor(None, self.update)
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
Nov 22 11:28:32 tchellopi hass[20138]: yield self # This tells Task to wait for completion.
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
Nov 22 11:28:32 tchellopi hass[20138]: future.result()
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
Nov 22 11:28:32 tchellopi hass[20138]: raise self._exception
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
Nov 22 11:28:32 tchellopi hass[20138]: result = self.fn(*self.args, **self.kwargs)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.homeassistant/custom_components/sensor/wunderground.py", line 187, in update
Nov 22 11:28:32 tchellopi hass[20138]: self.rest.update()
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/util/__init__.py", line 296, in wrapper
Nov 22 11:28:32 tchellopi hass[20138]: result = method(*args, **kwargs)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.homeassistant/custom_components/sensor/wunderground.py", line 222, in update
Nov 22 11:28:32 tchellopi hass[20138]: ["description"])
Nov 22 11:28:32 tchellopi hass[20138]: ValueError: you must supply a key
* Updated unittest since we are just printing the error instead raising
* Initial implemenation of DSMR component.
* Fix linting
* Remove protocol V2.2 support until merged upstream.
* Generate requirements using script.
* Use updated dsmr-parser with protocol 2.2 support.
* Add tests.
* Isort and input validation.
* Add entities for gas and actual meter reading. Error handling. Use Throttle.
* Implement non-blocking serial reader.
* Improve logging.
* Merge entities into one, add icons, fix tests for asyncio.
* Add error logging for serial reader.
* Refactoring and documentation.
- refactor asyncio reader task to make sure it stops with HA
- document general principle of this component
- refactor entity reading to be more clear
- remove cruft from split entity implementation
* Use `port` configuration key.
* DSMR V2.2 seems to conflict in explaining which tariff is high and low.
http://www.netbeheernederland.nl/themas/hotspot/hotspot-documenten/?dossierid=11010056&title=Slimme%20meter&onderdeel=Documenten
> DSMR v2.2 Final P1
>> 6.1: table vs table note
Meter Reading electricity delivered to client normal tariff) in 0,01 kWh - 1-0:1.8.1.255
Meter Reading electricity delivered to client (low tariff) in 0,01 kWh - 1-0:1.8.2.255
Note: Tariff code 1 is used for low tariff and tariff code 2 is used for normal tariff.
* Refactor to use asyncio.Protocol instead of loop+queue.
* Fix requirements
* Close transport when HA stops.
* Cleanup.
* Include as dependency for testing (until merged upstream.)
* Fix style.
* Update setup.cfg
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Fix lint: single argument for .exception and no more pass statement.
* Further lint fixes.
* pydocstyle fix
* Implement rate throttle.
Data on WAQI is usually updated once an hour - make it refresh every thirty minutes.
* Implement schema validation with voluptuous.
Change exception handling scope.
Move messages to debug().
* Fix lint (empty indented line).
* Sort lines correctly.
* Fix last lint issue.
* Provide additional sensor data as received from WAQI.
Easier-to-read throttle timing.
* Additional object attributes to be unrolled later.
* Add sonarr sensor and tests for sensor
* Fixed some linting errors and removed unused import
* Add SSL option for those who use SSL from within Sonarr
* Add requirements to all requirements, and sensor to coveragerc
* remove unused variable
* move methods to functions, and other lint fixes
* linting fixes
* linting is clean now
* Remove double requirement
* fix linting for docstrings, this should probably be a part of the script/lint and not just travis
* used MindrustUK's version ( https://github.com/MindrustUK/python-lightify/commits/master/osramlightify.py ) from Oct 2, 2016 and changed the REQUIRMENTS line to use the fixed lightify component with thread safety fixes
* reformatted long lines
* updated osramlightify requirements in requirements_all.txt
* ran script gen_requirements_all.py
* rerun requirements gen script on linux
* fixed some inspection warnings
* zip file points to a specific commit
* no requests to lights in properties, instead instance variables are update in update method
* regenerated requirements_all.txt
* removed call to update from is_on() property
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Climate: more consistent units
* Prevent unnecessary conversion in entity component
* int -> round
* Disable Google tests because they connect to the internet
* Remove default conversion rounding F->C
* Add rounding of temp to weather comp
* Fix equality
* Maintain precision when converting temp in entity
* Revert "Disable Google tests because they connect to the internet"
This reverts commit b60485dc19.
* new config parameter to specify number of digits for rounding average value
* fixed two `line too long` errors
* added three new tests for the mean sensor including test for precision of mean value
* Added source selection for Denon AVR Media Player
* Update denon.py
* Update denon.py
* Update denon.py
* Update denon.py
* Update denon.py
slight format update (space issue and new line)
* Further update regarding formatting
* Updated the source name with lowercase
* Update denon.py
pyvera 0.2.21 fixes the fact that use of requests.get was not using a
timeout. Some times (after a few days of use) the pyvera poll loop
would hang indefinitely on a requests.get of the event interface. This
would cause the pyvera thread to hang completely. It would also
prevent graceful shutdown, as pyvera does a thread join.
The new version uses a timeout, so that we won't lock up any more.
* create light.hue_activate_scene service
This creates a light.hue_activate_scene service that takes group_name
and scene_name, and calls phue's bridge.run_scene with those
parameters. This allows calling hue bridge stored scene names by name
during automation.
This only currently works reliably in 1 hue hub configurations (which
is most of them). Phue will be further enhanced to display warnings
when it can't figure out what to do with the parameters passed in to HA.
* Update hue.py
* Add keypress & output control services to Envisalink component
Add services to allow sending custom keypresses and activating
programmable outputs on an alarm control panel.
Implemented for the Envisalink alarm, and moving to new version of
pyenvisalink to support this.
Replicated the service handler mapping code from Cover component into
Alarm Control Panel to allow handling alternative schemas if required
by new services.
* Update requirements_all.txt
* Updated services.yaml
* Removed requirement to enter code in HA UI
Incorporated changes suggested by @sriram
https://github.com/srirams/home-assistant/commit/2f8deb70cb5f3621a69b6b9
acb72f8e29123650c
Including pending state for exit/entry delay
Clarified services to use the code passed to them as a first priority,
otherwise use the code from configuration
Swapped back to using NotImplementedError for the service definitions
* - Add support for alarm_keypress to manual alarm (functions like a standard alarm keypad where entering the code disarms or arms the alarm)
- Add tests for alarm_keypress to manual alarm
- Style corrections (too many returns, comment & whitespace issues)
* Removed alarm_output_control service as unable to incorporate in the demo/test in a meaningful way
* Add keypress & output control services to Envisalink component
Add services to allow sending custom keypresses and activating
programmable outputs on an alarm control panel.
Implemented for the Envisalink alarm, and moving to new version of
pyenvisalink to support this.
Replicated the service handler mapping code from Cover component into
Alarm Control Panel to allow handling alternative schemas if required
by new services.
* Update requirements_all.txt
* Updated services.yaml
* Removed requirement to enter code in HA UI
Incorporated changes suggested by @sriram
https://github.com/srirams/home-assistant/commit/2f8deb70cb5f3621a69b6b9
acb72f8e29123650c
Including pending state for exit/entry delay
Clarified services to use the code passed to them as a first priority,
otherwise use the code from configuration
Swapped back to using NotImplementedError for the service definitions
* - Add support for alarm_keypress to manual alarm (functions like a standard alarm keypad where entering the code disarms or arms the alarm)
- Add tests for alarm_keypress to manual alarm
- Style corrections (too many returns, comment & whitespace issues)
* Removed alarm_output_control service as unable to incorporate in the demo/test in a meaningful way
* Moved the Alarm_Keypress service into Envisalink component out of the generic
* Update envisalink.py
* Update services.yaml
* Migrate callbacks to use schedule_update_ha_state
* Migrate MQTT sensor callback to async
* Migrate wemo to not update inside schedule_update_ha_state
* Make MQTT switch async
* Fix nx584 test
* Migrate tellstick callback
* Migrate vera callback
* Alarm control panel - manual: use async callbacks
* Run the switch rest tests that work
This makes it so that media playback support for inputs is dynamically
fetched from the receiver, instead of assuming that all playback
commands work for all inputs.
Tests are added for this, using a FakeYamaha class, which has some
sample data stubbed in for key methods that need to be called. We also
include an example of the desc.xml needed to dynamically parse these
features for these tests (as this is done in platform init).
* Convert switch to AsnycIO
* Move update entity to service
* use time better for faster handling
* Change to suggestion from paulus
* Use new shedule_update_ha_state
* fix lint
* minimize executor calls
This feature needs to be enabled through the `http.use_x_forwarded_for` option,
satisfying security concerns of spoofed remote addresses in untrusted network
environments.
The testsuite was enhanced to explicitly test the functionality of the
header.
Fixes#4265.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
The linters really need to specify an exact version, because when
either flake8 or pylint release a new version, a whole lot of new
issues are caught, causing failures on the code unrelated to the
patches being pushed.
Pinning is a best practice for linters. This allows patches which move
forward the linter version to happen with any code fixes required for
it to pass.
Occassionally the values of `keys` and `p256h` are bytes objects instead of
strings. As JSON by default does not serialize bytes objects let's decode
bytes objects to unicode strings.
Resolves the registration issue mentioned in #4012.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
The linters really need to specify an exact version, because when
either flake8 or pylint release a new version, a whole lot of new
issues are caught, causing failures on the code unrelated to the
patches being pushed.
Pinning is a best practice for linters. This allows patches which move
forward the linter version to happen with any code fixes required for
it to pass.
Occassionally the values of `keys` and `p256h` are bytes objects instead of
strings. As JSON by default does not serialize bytes objects let's decode
bytes objects to unicode strings.
Resolves the registration issue mentioned in #4012.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
* Use entity_id for backend, friendly name for frontend
Closes https://github.com/home-assistant/home-assistant/issues/3434
Command line switches had the option to set a `friendly_name` reportedly
for use in the front end. However, if set, it was also being used as the
`entity_id`.
This did not seem like obvious behavior to me. This PR changes the
behavior so the entity_id is the object_id, which must already be
unique, and is an obvious place to have a very predictable slug (even if
long or unsightly), and the friendly name (if set) is used for the
display.
Example:
```yaml
switch:
platform: command_line
switches:
rf_kitchen_light_one:
command_on: switch_command on kitchen
command_off: switch_command off kitchen
command_state: query_command kitchen
value_template: '{{ value == "online" }}'
friendly_name: "Beautiful bright kitchen light!"
```
If you were using in an automation or from dev tools, would use:
`switch.rf_kitchen_light_one`, but your front end would still show `Beautiful
bright kitchen light!`
* Add new arg to test_assumed_state_should_be_true_if_command_state_is_false
* Import ENTITY_ID _FORMAT from existing, rename device_name to object_id
* Rename `device_name` to `object_id`
* Test that `entity_id` and `name` are set as expected
This feature needs to be enabled through the `http.use_x_forwarded_for` option,
satisfying security concerns of spoofed remote addresses in untrusted network
environments.
The testsuite was enhanced to explicitly test the functionality of the
header.
Fixes#4265.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
* Added some extra options to Weather Underground component
* Added Location and Elevation options
* Fixed if statement
* Fixed lint
* Updated tests including elevation and location
* Update wunderground.py
* Synology SSL fix & Error handling
* change handling for cookies/ssl
* fix use not deprecated functions
* fix lint
* change verify
* fix connector close to coro
* fix force close
* not needed since websession close connector too
* fix params
* fix lint
* Fix "argument of type 'NoneType' is not iterable" during discovery
When yamaha receivers are dynamically discovered, there config is
empty, which means that we need to set zone_ignore to [] otherwise the
iteration over receivers fails.
* Bump rxv library version to fix play_status bug
rxv version 0.3 will issue the play_status command even for sources
that don't support it, causing stack traces during updates when
receivers are on HDMI inputs.
This was fixed in rxv 0.3.1. Bump to fix bug #4226.
* Don't discovery receivers that we've already configured
The discovery component doesn't know anything about already configured
receivers. This means that specifying a receiver manually will make it
show up twice if you have the discovery component enabled.
This puts a platform specific work around here that ensures that if
the media_player is found, we ignore the discovery system.
* Change pilight systemcode validation to integer
According to the pilight code the systemcode should be an integer and
not a string (it is an int in the pilight code). Passing this as a
string caused errors from pilight:
"ERROR: elro_800_switch: insufficient number of arguments"
This fixes#4282
* Change pilight unit-id to positive integer
According to the pilight code the unit of an entity is also evrywhere
handled as an integer. So converting and passing this as string causes
pilight not to work.
This fixes#4282
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Synology SSL fix & Error handling
* change handling for cookies/ssl
* fix use not deprecated functions
* fix lint
* change verify
* fix connector close to coro
* fix force close
* not needed since websession close connector too
* fix params
* fix lint
* Fix "argument of type 'NoneType' is not iterable" during discovery
When yamaha receivers are dynamically discovered, there config is
empty, which means that we need to set zone_ignore to [] otherwise the
iteration over receivers fails.
* Bump rxv library version to fix play_status bug
rxv version 0.3 will issue the play_status command even for sources
that don't support it, causing stack traces during updates when
receivers are on HDMI inputs.
This was fixed in rxv 0.3.1. Bump to fix bug #4226.
* Don't discovery receivers that we've already configured
The discovery component doesn't know anything about already configured
receivers. This means that specifying a receiver manually will make it
show up twice if you have the discovery component enabled.
This puts a platform specific work around here that ensures that if
the media_player is found, we ignore the discovery system.
* Change pilight systemcode validation to integer
According to the pilight code the systemcode should be an integer and
not a string (it is an int in the pilight code). Passing this as a
string caused errors from pilight:
"ERROR: elro_800_switch: insufficient number of arguments"
This fixes#4282
* Change pilight unit-id to positive integer
According to the pilight code the unit of an entity is also evrywhere
handled as an integer. So converting and passing this as string causes
pilight not to work.
This fixes#4282
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add timeout to platform/component
* Revert "Add timeout to platform/component"
This reverts commit 280a311e48.
* Add logging data
* Change log message with paulus comments
* Set executor to 15 and help to reduce flooting async core with udpates
* fix typing
* if it a executor, wait
* address comments from paulus
* add space for style :)
* fix spell
* Update entity_component.py
* Update entity_component.py
GATEWAYS was a dict, so would overwrite item if key was the same. This
would happen when using multiple MQTT gateways, since the device id is
the same (`mqtt`).
* Fix by changing GATEWAYS from dict into list.
* Use hass data to store mysensors gateways instead of having GATEWAYS
be a global.
* Updated Emulated_Hue to send request info as variables to scripts
* Updated tests to not use the old mqtt
* Updated test to actualy use and validate the script variables
* Fixed the removal of time in a recent merge
* fixed test to not use a timer
* Add Map support for Locative component
The Locative App on the mobile is sending an HTTP request to the
server where also the GPS location is sent.
But the GPS location was not passed to the event device_tracker.see.
Use the passed GPS location from Locative and pass it to the
device_tracker.see event.
With this the device is then also shown on the HA Map component.
* Use existing constants for latitude and longitude
Use the existing constants from homeassistant.consts:
ATTR_LATITUDE for 'latitude'
ATTR_LONGITUDE for 'longitude'
* Reuse the "yield from self.hass.loop.run_in_executor" again
* Use variable gps_location
* Add Swisscom Internet-Box device tracker
* Add Swisscom device tracker to .coveragerc
* Add timeout to requests
Fix formatting and add missing comments to pass the lint test
* Remove authentication which was not required
I realised that there was no need to be authenticated to get the
connected devices. Thanks Swisscom :/
* Moving config to a PLATFORM_SCHEMA and using voluptuous
* Bugfix windows have a other default loop now
* fix handling with 3.4.2 that not support ensure_future
* make the same as ensure_future does
* fix spell
* fix lazy test
* Added Synology DSM Sensor
* Fixed balloobbot's comments
* Fixed mistake (should have run lint and flake8 before committing
* Fixed update mechanisme according to balloobs feedback
* Requesting retest as test failure isn't related to changes made
* Update the icloud device_tracker
* addressed @kellerza 's comments
* GMTT config needs an entity_id
* renamed services
* fix cookiedir and clean up keep_alive function
* fix travis errors
* forgot a self.
* update devices after initializing the API
* changed wording
* addressed changes from @kellerza
* Syntax error solved
* Update icloud.py
* Only use account of username instead of whole username as default for account name
* use slugify instead of slug for schema
* remove Google Maps Travel Time
* Add comment from original tracker back
* Added support for Philips Tvs with JointSpace API
* Flake + Lint fixes
* Lint be like "lol fu"
* Changes as requested by reviewers, except lib-requirement
* Switched to library-usage
* lint... newline-bingo...
* Fixes in TP-Link Switch logging 0 values on init
On init of component the emeter would log to influxdb and possibly other inputs a 0 value, instead of not logging anything.
Initial polling should circumvent that behavior and avoid logging inconsistencies.
* Refactors update call in __init__
* Add a method to throttle calls to services
This adds CallRateDelayThrottle. This is a class that provides an
decorator to throttle calls to services. Instead of the Throttle in
homeassistant.util it does this by delaying all subsequent calls
instead of just dropping them. Dropping of calls would be bad if we
call services to actual change the state of a connected hardware (like
rf controlled power plugs).
Ihe delay is done by rescheduling the call using
track_point_in_utc_time from homeassistant.helpers.event so it should
not block the mainloop at all.
* Add unittests for CallRateDelayThrottle
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Introduce a send_delay for pilight component
If pilight is used with a "pilight USB Nano" between the daemon and the
hardware, we must use a delay between sending multiple signals.
Otherwise the hardware will just skip random codes. We hit this
condition for example, if we switch a group of pilight switches on or
off. Without the delay, random switch signals will not be transmitted by
the RF transmitter.
As this seems not necessary, if the transmitter is directly connected
via GPIO, we introduce a optional configuration to set the delay.
* Add unittests for pilight send_delay handling
This adds an unittest to test the delayed calls to the send_code
service.
* Initial attempt at implementation
* Adding Garadget cover component
* Updating Device to be Required
* Updating .coveragerc to exclude from testing
* Updating code review items
* Updating per 2nd code review
* Updating configuration to be more like command-line
* Initial submission of LiteJet integration.
* Add LiteJet switch pressed automation trigger. (State changes are too slow to catch a press-release.)
Add LiteJet scene, replacing commented out code that treated these as lights.
Include LiteJet numbers in the device state so that it is easy to lookup entity -> number.
* Fix missing global.
* Allow light's brightness to be set explicitly.
* Support optional 'ignore' key to ignore prefixes of loads, switches, and scenes that weren't configured for use in the LiteJet system.
* Fix lint errors and warnings.
* Cleanup header comments.
Default to not creating LiteJet switches as these are generally not useful.
* Lint fixes.
* Fixes from pull request feedback.
* Use hass.data instead of globals for data storage.
* Fix lint warnings.
* Sonos responsiveness improvements (async_ coroutines, event based updating, album art caching) + Better radio station information
* Docstring fixes.
* Docstring fixes.
* Updated SoCo dependency + fixed file permissions.
* Only fetch speaker info if needed.
* PEP8 fixes
* Fixed SoCoMock.get_speaker_info to get test to pass.
* Regenerated requirements_all.txt + async fetching of album art with caching + added http_session to HomeAssistant object.
* Unit test fixed.
* Add blank line as per flake8
* Fixed media image proxy unit test.
* Removed async stuff.
* Removed last remnants of async stuff.
* Lazy initialise the worker pool
* Minimize pool initialization in core tests
* Fix tests on Python 3.4
* Remove passing in thread count to mock HASS
* Tests: Allow pool by default for threaded, disable for async
* Remove JobPriority for thread pool
* Fix wrong block_till_done
* EmulatedHue: Remove unused test code
* Zigbee: do not touch hass.pool
* Init loop in add_job
* Fix core test
* Fix random sensor test
* Add Emby Server media_player component
* Code cleanup, move to request sessions, generate UUID per session
* Make media image fetch more robust
* Allow for http or https
* Cleanup some Keyerror conditions found through more testing
* Move EmbyRemote to pip, update requirements
* Code cleanup, add SSL config option
* catch all errors when doing mqtt message unicode-decode.
* added AttributeError and UnicodeDecodeError to exception when decoding an mqtt message payload
* Add link to docs
* Fix link
* Update line breaks
* Update ordering
* Align vera platofrm to only use add_devices
(instead od add_devices_callback)
* Remove line break
* Use consts
* Update ordering
* Update ordering
* Use const, create default name, use string formatting
* Update ordering
* Use const
* Update import style
* Update ordering and line breaks
* update line breaks
* Set default port
* Set defaults and update ordering
* Update ordering
* Minor style updates
* Update ordering, defaults, line breaks, and readability
* Use constants
* Add line breaks
* use string formatting
* Update line breaks
* Update logger
* Fix initialization of zwave color bulbs
Zwave values can be added to the node in any order. This change allows
proper initialization when the multilevel value is added before the
color value.
* Fix incorrect rename of color command class
* Add new const (base)
* Use constant
* Remove second error message, use const, add attribution, add link
to docs, remove unused vars, and a little simplification
* Add quote
* Use const
* Add attribution, simplify the code, and use consts
* Add zone_ignore option for yamaha.
We attempt to discover all zones for yamaha receivers. There are times
when users may want to suppress some zones from showing up. When a
Zone isn't actually connected to speakers, or on some newer receivers
where Zone_4 is an HDMI only zone, that doesn't support even basic
media_player UI.
This provide a mechanism for users to do that.
Fixes#4088
* Update yamaha.py
* successfully tested the "remote temperature mode" switch for the radio thermostat
* removed logging and interpreted None as Off.
* turn_off value is also templated now -- can depend on state
Also, undid accidental removal of error logging.
* ensured backward compatibility of config file
if value_template is not provided, the update function behaves as before
* ran autopep8 --in-place
* fixed another complaint of tox
* addressed the comments of balloob
* undid acccidental log.error to log.info
* timeout : 50 -> 10
* added a timeout parameter
* removed the stray '-', better names for the failure case
* string comparisons after .lower(), as suggested by balloob
* addressed balloob's latest requests
* making flake happy
* value_template --> is_on_template in config file
* moved CONF_IS_ON_TEMPLATE to local file
* null checks
* addressed flake error
* properly comparing template text when is_on is not a template.
* Added a ThingSpeak component
* Forgot a colon. Fixed it
* Some config variables are better required
* New requirements created by the script
* Updated the .coveragerc
* Fixed small linting errors
* Removed unneccessary validation
* Even more linting error fixes
* Changed the way the component listens to state changes
* Removed unneccessary declaration of 'state' variable, referring to new_state instead
This uses the discovery code from netdisco/ha to discover yamaha
receivers. The old discovery code remains if discovery is turned of in
HA, at least for now. Though it probably is worth turning that off in
the future.
* Use unix newlines on test_emulated_hue
This commit switches the test_emulated_hue module to use unix newlines
instead of the DOS style that were there before. (using dos2unix on
the file) This makes it consistent with the other files in the repo.
* Cleanup emulated_hue tests
Previously these tests relied on the mqtt light platform as test devices
to control with the emulated hue. However, this was pretty heavyweight
and required running an MQTT broker in the tests. Instead this commit
switches it to use the demo light platform which is strictly in memory.
Fixes#3549
* Fixes issue #4067 - Wunderground sensor with alerts exceeds API limits
To avoid hitting the max limit of 500 calls per day, this patch keeps weather conditions being updated each 5 minutes
and weather advisories each 15 minutes.
This formula will result the following:
conditions -> 300 seconds -> 5 minutes -> 12 req/h -> 288 req/day
alerts -> 900 seconds -> 15 minutes -> 4 req/h -> 96 req/day
* Using timedelta in minutes instead seconds
* If no weather advisories were issued, state should return 0 instead Unknown
* Updated to keep on the same if statement
* Revert "Updated to keep on the same if statement"
This reverts commit 0e6a94aa0f.
* Sonos improvements: media_* properties delegate to coordinator if speaker is a slave, media_image_url and media_title now works for radio streams, source selection/list takes speaker model into account, commands on slaves delegate to coordinator.
* Fixed failing unit tests.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Pilight sensor component
* Python 3.4 compatibility
* D202
* Use pytest-caplog and no unittest.TestCase
* Fix setup/teardown of unittests
* Activate coverage testing
* Bugfix whitelist filter and use bugfixed pilight library
* Use newest pilight library that has a bugfix
* Add unittest for pilight hub component
* PEP257 for docstrings
* Bugfix setting device name from host name and small cleanup
- Init with connection error handling is more clear
- Comments clean-up
* PEP257
* New unittest with full coverage
* Upload missing testfixtures
* D209
* Handle double quotes in reply
* Formatting
* Added support for Notifications for Android TV / FireTV
* Silly me forgot to commit coverage
* Fixed pylint
* Fixed flake8
* Fixed another flake8 -.-
* Changed option 'ip' to 'host' like most other platforms do
This commit adds a new component for communicating with mochad[1] a
socket interface for the CM15A and CM19A USB X10 controllers. This
commit leverages the pymochad library to interface with a mochad socket
either on a local or remote machine. Mochad is added as as a generic
platform because it supports multiple different classes of device,
however in this patch only the switch device implemented as a starting
point. Future patches will include other devices types. (although
that's dependent on someone gaining access to those)
[1] https://sourceforge.net/projects/mochad/
* iOS component hot fixes around component/platform loading, logging, and more
* Load device_tracker and zeroconf in deps instead of bootstraping
* Change conditional check on status code
* iOS component hot fixes around component/platform loading, logging, and more
* Load device_tracker and zeroconf in deps instead of bootstraping
* Change conditional check on status code
* Adds support for Pioneer AVR interface port number
https://community.home-assistant.io/t/support-for-pioneer-avr/503
telnetlib supports a port number so adding port as
an optional config element with a default of 23 resolves this.
* Adds timeout to Pioneer AVR
timeout in telnetlib defaults to socket._GLOBAL_DEFAULT_TIMEOUT
which is not a value, but rather a bare Object used for comparison.
telnetlib says the following about the timeout optional argument:
"The optional timeout parameter specifies a timeout in seconds
for blocking operations like the connection attempt (if not
specified, the global default timeout setting will be used)."
From the documentation for sockets:
"Sockets are by default always created in blocking mode"
Catching connect and timeout errors, logging to debug
and continuing.
* Catches timeout exceptions, logs and continues.
* Initial commit of the iOS component and platform
* Allow extra
* Add battery to identify, a new function to get devices, and load the upcoming sensor
* Add iOS sensor platform, currently for battery state & level
* Add discoverability for the iOS app
* Convert single quote to double quotes
* Load all required components and platforms when loading the iOS component for the best experience
* Unify quote style to double
* Change to hass_ios
* Update push URL, add support for logging based on status code, log rate limit updates
* Block iOS from coverage checks for now...
* Work better with password-protected Squeezebox / LMS servers, including getting file art. Refactored to only have a single method calling the telent lib. (Should make it easier to convert to the more appropriate JSON interface)
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Update squeezebox.py
* Adds energy monitoring capabilities to the TP-Link HS110
Energy monitoring works only on the HS110 model
* Reverts to using GadgetReactor's module
* Updates requirements_all.txt
* Refactors tplink switch to use attribute caching
* Update tplink.py
* Add Bbox Routeur bandwidth as sensors
Add possibility to monitor max and currently used bandwidth of your xdsl connection for Bbox Routeur
* Minor Fixes
Unit constant get back into the main sensor file
* Unused round removed
* Add support for Neato Connected robot as a switch
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add checklist items
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add missing docstring
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato] Add update function to retrieve robot state
* Add docstring for update function + catch exception when retrieving state
* Change type of HTTPError when updating state
* Fix pylint errors
* Telstra API component
* import PLATFORM_SCHEMA
* Exclude Telstra notify component in coveragerc
* fix authentication issues
* Include title in SMS if it's provided
* pass lint
* Fix many code styling issues
* Confirm credentials are correct on component setup
* Add initial SNMPv3 support for better security
* Fixed indentation errors
* Fixed flake8 E128 on row 65
* Disabled warning about too many instance-attributes
* Removed extra code, added Inclusive to make better config validation
Changelog: https://github.com/SoCo/SoCo/releases/tag/v0.12
Backwards Compatability changes:
Dropped support for Python 3.2
Methods relating to the music library (get_artists, get_album_artists, get_albums and others) have been moved to the music_library module. Instead of device.get_album_artists(), please now use device.music_library.get_album_artists() etc. Old code will continue to work for the moment, but will raise deprecation warnings
Made a hard deprecation of the Spotify plugin since the API it relied on has been deprecated and it therefore no longer worked
Dropped pylint checks for Python 2.6
* Enhance yamaha component
This enhances the yamaha component to create 1 player per zone,
instead of only one play, which provides direct control of the various
zones for the player.
It also exposes play_media for NET_RADIO sources, which allows direct
setting of that.
This requires code changes in rxv 0.2.0, so the requirement dependency
is raised.
* Support current playback metadata for NET_RADIO
When on NET RADIO, support the currently playing information.
* Pilight daemon expects JSON serializable data. Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use pytest-caplog and no unittest.TestCase
* #3899 - Ecobee tempoeratures
* #3899 Remove unused import
* #3899 Implement min/max_temp in ecobee.py as these temperatures have to be in F for ecobee api.
* #3899 Stale print
* #3899 Use min/max_temp from base class
* #3899 Removed unused import (again) so tests pass since changing to use super class
* #3899 Fix long lines
* #3899 Install tox locally... make it happy, commit
* #3899 Remove overridden min/max_temp and instead update __init__:min/max_temp to convert to self.temperature_unit (of the thermostat) as opposed to self.unit_of_measurement (of the system), which is wrong
* Remove unused import from ecobee
* #3829 - Fixed type LowHighTuple doesn't define __round__ method issue when Nest is operating in range mode
* Testing if temperature is a tuple instead int or float
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* changed to use http/2 library for push notifications
* fixed lint issue
* fixed test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* added missing docstring
* moved service description to main services.yaml file
* renamed apns service
requests/urllib3 is notorious for using the INFO log level for very
DEBUG kinds of information. Given the configurability of python
logging it's actually pretty easy to just set requests to WARN by
default. This cleans out a bunch of largely unuseful log lines from
home assistant output.
Instead of globally using StrictUndefined, introduce a filter that
will trigger a render failure on undefined variables.
Use as `{{ value_json.someval | is_defined }}`.
By not successfully rendering unknown objects to an empty string
the caller provided error_value actually gets used.
This allows, for instance, the MQTT sensor to retain its state when an
unexpected or unwanted message (#2733/#3834) is received.
* Emoncms_history component, fix git mess
* - switch to track_point_in_time to send all data at foxed interval
- don't use json_dump
- switch to http post instead of http get
If a mock's assert_called_once_with method is misspelled (e.g. asert_called_once_with) then the test will appear as passing. Therefore, this commit removes all instances of assert_called_once_with calls and replaces them with two assertions:
self.assertEqual(mock.call_count, 1)
self.assertEqual(mock.call_args, mock.call(call_args))
* first version
* First draft component entities
* Change add_entities to callback from coroutine
* Fix bug add async_prepare_reload
* Group draft v1
* group async
* bugfix
* bugfix v2
* fix lint
* fix extract_entity_ids
* fix other things
* move get_component out of executor
* bugfix
* Address minor changes
* lint
* bugfix - should work now
* make group init async only
* change update handling to old stuff
* fix group handling, remove generator from init
* fix lint
* protect loop for spaming with updates
* fix lint
* update test_group
* fix
* update group handling
* fix __init__ async trouble
* move device_tracker to new layout
* lint
* fix group unittest
* Test with coroutine
* fix bug
* now it works 💯
* ups
* first part of suggestion
* add_entities to coroutine
* change group
* convert add async_add_entity to coroutine
* fix unit tests
* fix lint
* fix lint part 2
* fix wrong import delete
* change async_update_tracked_entity_ids to coroutine
* fix
* revert last change
* fix unittest entity id
* fix unittest
* fix unittest
* fix unittest entity_component
* fix group
* fix group_test
* try part 2 to fix test_group
* fix all entity_component
* rename _process_config
* Change Group to init with factory
* fix lint
* fix lint
* fix callback
* Tweak entity component and group
* More fixes
* Final fixes
* No longer needed blocks
* Address @bbangert comments
* Add test for group.stop
* More callbacks for automation
* Added the ability to Weather Underground to track severe weather alerts
* * Added message on the advisory attr
* Updated tests
* * Making use of guard clause
* Checking multiple_alerts prior loop
* Using a better way to create dict
* Fixed issue to set to None only the object that failed
* Added unittest
* Split update() method to different calls with their one throttle control to minimize API calls
* Updated unittest and make sure the alert sensor will not return 'unknown' status'
* Removed update() method from state property
* Branch rebased and include Weather Underground attribution
* Update wunderground.py
* Relaxes the configuration options for influxdb
By default influxdb allows unauthenticated access
Home Assistant required at least username and password to be present to properly submit data to influxdb
* Removes unused import of 'copy'
The copy module was used only in the removed test case responsible for testing the missing keys
* Updates InfluxDB config schema to require user and password
Current InfluxDB (v 1.0) can work without any authentication, but when authentication is enabled both username and password should be set.
* Removes extra white space in test_influxdb.py
* added error handling to mqtt message receive if payload is not utf-8 unicode
added mqtt test for above code as well
* change permission back to 644
* attempting to test new code
* changed exception to AttributeError
fixed test for above
* fixed lint errors I made in tests....mqtt/test_init.py
* more lint fixes for my added test
* remove dual decode of MQTT payload
* convert if to try, except, else statement for mqtt payload decode
* rework mqtt unicode testing code to properly check for log file entriy on unicode decode exception
* fixed lint error
* Update test_init.py
* Initial Zoneminder commit
* Fixing bug when ZM sets its function to 'None'
* Adding zoneminder to coverage
* Quick Doc fix
* Update zoneminder.py
Doc Fix
* making the url base optional
This adds a sensor component that builds sensors based on the arwn
project (https://github.com/sdague/arwn). This uses a 433mhz receiver
to collect weather data and publish it over mqtt in a well defined
schema, which home-assistant can display as sensors.
* Add Alexa Flash Briefing Skill API support
* Set default value for text to empty string as per API docs
* Clean up existing Alexa tests
* Update configuration parsing and validation
* Add tests for the Flash Briefing API
* Update test_alexa.py
* added include and exclude functionality to history component
* fixed summary lines in test method doc.
* cleanup of query filter creation
* o improved config validation
o move move IGNORE_DOMAINS to Filter.apply()
o removed config from Last5StatesView
o Filters instance is now created on setup
o config values are processed in setup and set to the Filters instance
o function _set_filters_in_query() moved to Filters class and renamed to apply()
* added unittests for more include/exclude filter combinations
* make pylint happy
* Fixes an issue where Chromecast audio groups were not properly discovered
* Forgot to commit the main fix
* Removes unused variable
* Doesn't use a protected API anymore
* PR remarks
* Fixes tests, adds comment
* Restores line as it was in the original commit, rephrases comment
* Should fix lint issues
* Trailing whitespace
* Some more lint
* Add files via upload
* Update .coveragerc
* test
* Update synology camera
* Use voluptuous for synology
* Use voluptuous for synology
* Use voluptuous for synology
* Use voluptuous for synology
* Conform synology to flake8
* Added Whitelist to synology
* Sync to dev branch
* Added helper function to synology
* Separate platform and presentation units in climate
* Fix unit tests
Maybe
* Fix unit tests some more
Maybe
* Rename _platform_unit_of_measurement to temperature_unit
* Fix tests for renamed attribute
* Added additional checks which hides functions which are not support (like fans / humidity / cooling)
* Fixed pylint and flake8 errors (not test file available)
* Fixed pydocstyle error
* Refactored Code and Comments as described in pull-request
* Added additional comment and requesting retest
* Upgraded to python-nest 2.11 which contains previously hidden functions
* Cache condition in helpers.Script
The caching is a simple in-memory, per-instance dictionary.
We use __str__ to format cache keys.
This naive implementation has some disadvantages (e.g., we won't be able
to cache two conditions that contain references to
distinct-but-equivalent object instances and we don't have any control
over the size of the condition cache), but for most simple use-cases the
approach should be good enough.
Resolves#3629
* Fix docstring style
* Basic support for Netatmo welcome binary sensors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Bug fixes and optimization for Netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* pylint fixes
* Bug Fixing and optimization for Netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add unique_id for cameras to avoid duplicate
And global config to disable discovery for netatmo devices
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Change approved_ips from string to cidr validation
Relabel to trusted_networks, better reflecting its expected inputs,
everything that ipaddress.ip_networks recognizes as an ip network
is possible:
- 127.0.0.1 (single ipv4 addresses)
- 192.168.0.0/24 (ipv4 networks)
- ::1 (single ipv6 addresses)
- 2001:DB8::/48 (ipv6 networks)
* Add support for the X-Forwarded-For header
The command line cover value template is optional so we
need to check it's not none before assigning hass to it.
Fixes#3649
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
The command line cover value template is optional so we
need to check it's not none before assigning hass to it.
Fixes#3649
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Initial version of "haveibeenpwned" sensor component
* 2 flake8 fixes
* remove debugging error message
* Increase scan_interval as well as throttle to make sure that during initial startup of hass the request happens with 5 seconds delays and after startup with 15 minutes delays. Scan_interval is increased also to not call update as often
* update .coveragerc
* remove (ssl) verify=False
* - use dict to keep the request values with email as key
- use track_point_in_time system to make sure data updates initially at 5 seconds between each call until all sensor's email have a result in the dict.
* fix a pylint error that happend on the py35 tests
* Add discovery support for Netatmo Weather station
Only The weather information are currently supported (No battery or wifi status supported)
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add unique_id for netatmo sensors to avoid duplicate
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update requirements_all.txt and PEP8 fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Rename Forecast.io platform to Dark Sky
* Upgrade to python-forecastio to 1.3.5
* Update to reflect name change (Forecast.io -> Dark Sky)
* Rename forecast to darksky
* Bugfix signhandling/services
* change from coroutine to callback
* add error handling
* fix bug with endless running
* fix unit test
* Revert "fix unit test"
This reverts commit 31135c7709.
* Disable sigterm/sighup test
* Bugfix signhandling/services
* change from coroutine to callback
* add error handling
* fix bug with endless running
* fix unit test
* Revert "fix unit test"
This reverts commit 31135c7709.
* Disable sigterm/sighup test
* Add async_safe annotation
* More async_run_job
* coroutine -> async_save
* Lint
* Rename async_safe -> callback
* Add tests to core for different job types
* Add one more test with different type of callbacks
* Fix typing signature for callback methods
* Fix callback service executed method
* Fix method signatures for callback
* Template platforms: create_task instead of yield from
* Automation: less yielding, more create_tasking
* Helpers.script: less yielding, more create_tasking
* Deflake logbook test
* Deflake automation reload config test
* MQTT: Use async_add_job and threaded_listener_factory
* Deflake other logbook test
* lint
* Add test for automation trigger service
* MQTT client can be called from within async
commit 220331260e9748ac8e17b3ce776330c1dfb7725b
Merge: 73d93e5c891820
Author: Robbie Trencheny <me@robbiet.us>
Date: Sun Oct 2 17:57:24 2016 -0700
Merge branch 'color_temp_for_mqtt_light' of https://github.com/alterscape/home-assistant into alterscape-color_temp_for_mqtt_light
commit c89182008a
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 23:06:34 2016 -0700
fix missing docstring.
commit e61dda4dd3
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 22:43:04 2016 -0700
fix pep8 errors and typos in tests.
commit 559d1752d2
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 21:41:07 2016 -0700
add tests for mqtt color temp support
commit 702defb932
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 20:55:07 2016 -0700
Add color temp support to mqtt lights.
* Make flux always adjust brightness of light (even when not in XY mode)
* Remove kelvin mode from flux switch
The light/turn_on service only works with mired values, kelvin values
are out of range per the schema.
* Use already defined min/max values for light/turn_on schema
* Clamp temp value to light/turn_on allowed values
* Update notify to expect a list of string targets instead of a single string
* Actually do the thing I set out to do
* Fix notify.group test to expect an array of targets
* REST platform will only use the first target in the list
* Update notify platforms to expect a list of targets
* Update notify services.yaml
* Skip RFXtrx tests unless RFXTRX=RUN
* Remove my previous hacks to slightly speed up rfxtrx
* Exclude RFXTRX tests from coverage
* Remove unused import in rfxtrx tstt
* Add close connection back to RFXtrx tests
* Typo
* Added support for MySensors cover device
* Fixed set_req not defined
* Fixed V_PERCENTAGE is str
* Removed set_cover_position
The MySensors documentation doesn’t specify when sending a V_PERCENTAGE
is allowed.
* Fixed homeassistant/components/mysensors.py line too long
* Fixed lint ATTR_POSITION imported but unused
* Use V_PERCENTAGE for MySensors cover
* Revert "Removed set_cover_position"
This reverts commit d78cb3a04d.
* Fix set_req, ATTR_POSITION not defined
* Added support for non-exactly positionable covers
* Fixed V_PERCENTAGE cast to bool
* Ported MySensors cover back to v1.4
`V_PERCENTAGE` and `V_DIMMER` are aliases just like `V_STATUS` and
`V_LIGHT`, so the code inside `MySensorsCover` doesn’t need to be
updated.
* Fixed v1.5 V_TYPES not in in v1.4 gateway SetReq
* Update Command classes and device types to Sigma SDK
* Fix some pylint
* Seperate constants to file
* Flake8
* coverage and flake8 pylint
* Add services.yaml
* Service descriptions was missing
* Spelling :)
* grammar
* Remove zwave service descriptions from main
* Add ability to change Nest mode to all available options
* Make Nest state reflect current operation not current operation mode
* Update Nest sensor to use operation mode
* Fix linting
* Revert "Make Nest state reflect current operation not current operation mode"
This reverts commit 573ba028d8.
Conflicts:
homeassistant/components/climate/nest.py
* Fixed issue #3574 - Temperature slider fixed on frontend on heat/cool mode
* Fixed target_temperature to return None when self.is_away_mode_on is True
* Add ability to change Nest mode to all available options
* Make Nest state reflect current operation not current operation mode
* Update Nest sensor to use operation mode
* Fix linting
* Revert "Make Nest state reflect current operation not current operation mode"
This reverts commit 573ba028d8.
Conflicts:
homeassistant/components/climate/nest.py
* Fixed issue #3574 - Temperature slider fixed on frontend on heat/cool mode
* Fixed target_temperature to return None when self.is_away_mode_on is True
Sep 29 00:59:22 pi hass[21333]: if self.device.measurment_scale == 'F':
Sep 29 00:59:22 pi hass[21333]: AttributeError: 'Device' object has no attribute 'measurment_scale'
Sep 29 00:59:22 pi hass[21333]: if self.device.measurment_scale == 'F':
Sep 29 00:59:22 pi hass[21333]: AttributeError: 'Device' object has no attribute 'measurment_scale'
* Update ecobee to use only range setpoints
* Update nest to only use range setpoints
* Update demo to use only range for ecobee test device
* Update test
* Fetch unit from ecobee
* generic_thermostat did not have state
* generic_thermostat test update
* Platform schema had duplicate retain keys, which made it always set
to default.
* Optimistic state changed was inverted, due to using integer position
instead of boolean.
* Add more tests for mqtt cover.
* Add new component for licence plates processing (OpenAlpr)
* address balloobbot comments
* add to coveragerc
* move config from device to base
* fix lint
* move local api test to voluptous
* split render engine
* change cloud_api pip string & lint
* update requirements_all.txt
* fix lint
* update cloud_api url
* convert base64 byte string to string
* Update cloudapi / add configence / add state
* fix lint
* change state to high confidence plate
* fix cloudapi
* fix local api detection
* add wraper for local api
* fix lint
* fix wrong import
* fix HAAlpr name
* update ha-alpr without async
* support only eventbased requests with interval 0
* fix minor things
* fix lint
* fix lint2
* Added play media to squeezebox
The squeezebox component can now add a URI to an existing playlist or just over write it to force a stream to play.
* Cleaned up flake8 issues with formatting.
Spacing... The end of the world! Fixed. Once day the tools will fix this on the fly, one day...
[x] ./homeassistant/components/media_player/squeezebox.py:307:1: W293 blank line contains whitespace
[x] ./homeassistant/components/media_player/squeezebox.py:366:1: W391 blank line at end of file
[x] ./homeassistant/components/media_player/squeezebox.py:366:1: W293 blank line contains whitespace
Updated SUPPORT_SQUEEZEBOX to add SUPPORT_PLAY_MEDIA
[x] ./homeassistant/components/media_player/squeezebox.py:13:1: F401 'homeassistant.components.media_player.SUPPORT_PLAY_MEDIA' imported but unused
* Updates from review
Updated the comments to indicate they are developer / API comments and not for end users.
Marked the private functions with a leading underscore (_)
* Fixed Lint issues.
202ERROR: InvocationError: '/home/travis/build/home-assistant/home-assistant/.tox/lint/bin/flake8'
203lint runtests: commands[1] | pylint homeassistant
204************* Module homeassistant.components.media_player.squeezebox
205C:322, 0: Trailing whitespace (trailing-whitespace)
* Added Support for mysensnors Climate/HVAC device
* Added Support for mysensnors-hvac device:fix pylint error
* Added Support for mysensnors-hvac device:fix pylint error2
* Fixed Issues in code as per review comments
* Fixed Linter Errors
* Fixed Linter Errors:2
* Fixed Linter Errors:2
* Fixed Linter Errors
* Fixed Linter Errors
* Fixed Linter Errors
* Added Support for MySensors HVAC| Fixed Review Comments| Removed Additional Comments
* Added Support for MySensors HVAC| Fixed Review Comments Itr2
* Changes to correctly support devices with both high and low bound temperatures
* Changed to optimize the code
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Added the ability to trigger the alarm.
* Bump version of pyenvisalink to 1.3
* Fixed an issue where the panic_type was not passed to the sub-components properly.
* Bump pyenvisalink version, and make default panic mode = police.
* Pass in event loop to pyenvisalink.
* Made the components play nicely with asyncio.
* Bump pyenvisalink to 1.6
* Bump up pyenvisalink, and better handle synchronous setup.
* Added the possibility to manually specify a Yamaha Receiver
* Added the possibility to manually specify a Yamaha AVR
* Using string formatting
* Hostname checks for None now
* Do not use add_devices for each if-branch separately
* Fixed linting
* Update __init__.py
addedattribute "WHITE_VALUE" to improve support for RGBW devices
* Update services.yaml
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
shortened line
* Update __init__.py
* Update __init__.py
* Add mysensors RGBW and light tests
* Activate support for mysensors RGBW devices with support for
white_value attribute.
* Add white_value support in light demo platform.
* Add tests for white_value and more for light component.
* Add tests for light demo platform.
* Fix import order in check_config.
* o added ability to exclude entities or domains from logbook
o exclude hidden entities
* fixed remaned configuration key
* - filter the events before they get passed to humanify, to separate concerns
- instead of looking at customize, look for the hidden attribute on the state change events
- access to configuration defaults to an empty list - no need to check
* - filter only events of type EVENT_STATE_CHANGED
- improve config handling
* added unit tests to cover all filter cases and logbook message creation
* Added email component
* added email sensor component
* added doc string to test class
* fixed lint error
* fixed lint error
* rename of email component
* added another block as test fails on CI
* added retry to multi email test
* added delay to retry
* added to .coveragerc
* removed sleep from tests and fixed up stale comments
* Move worker pool monitoring to be time based instead of add_job based.
* Stub out worker pool monitor during tests
* Add test for monitor worker pool.
* Improve naming
* Test stop_monitor coroutine
* Add async_create_timer test
* Finish rename create_timer
* Added support to Yahoo Finance to track the stock market within Home Assistant
* Fixed pylint issues
* Fixed formatting issues
* Fixed pep257 issues
* - Fixed URL link
- Added attributes for Yahoo Finance
* Removed price sales ATTR
* Fixed lint and flake8 issues. Added attribution to Yahoo! per https://developer.yahoo.com/attribution/
* Fix test shutdown to ensure loop/threads are clean.
We now ensure the loop is closed, it has completed, and the
executer has completed. This ensure all threads are freed
up with any test calling hass.stop().
* Fix lint issue with run_loop
* Update Ecobee state after making changes to climate
Without this, climate and sensor state will take up to 3 minutes
(the MIN_TIME_BETWEEN_UPDATES on its update throttle) to update in
the interface, which makes it more difficult to do automation around the
state.
* Use a boolean instance variable that update can check, rather than always calling update
* Add PyBluez to Dockerfile
Adds PyBluez to Dockerfile so people using Docker can run Bluetooth
devices
* Remove pip install of pybluez
Pybluez will be installed automatically when the Bluetooth device
tracker is enabled
* Add Initial version for emoncms feeds sensor
* flake8 test fixes
* pylint test fixes
* - fix bug with include_feed_id_names not assigning the name to the element in the same postion as found in include_feed_id
- a few structure changes to have less nesting (pylint fix)
- minor other changes
* update .coveragerc
* voluptuous fixes:
- exclude_feed_id and include_feed_id Exclusive group so that only one (or none) can be specified at once
- id must be positive int
- exclude_feed_id and include_feed_id must be positive int
* Fix comment so it refers to the documentation
* use string formatting
* Remove outer try
* clean up sensors.append calls
(break them out for loop)
* multiple changes like:
- rename config value "include_feed_id" to "include_only_feed_id"
- rename config value "include_feed_id_names" to "sensor_names"
- renamed config value sensor_names is now a dictionary an can also be used when renamed config value "include_only_feed_id" is not specified
- Set default value for scan_interval using the config validation
- blank lines between default, 3rd party and own imports
- removed homeassistant.util import, it was not needed anymore
* fix extended voluptuous schema
scan_interval should not be extended to PLATFORM_SCHEMA as it was already in the schema by config_validation helper so i should not add / change it. It was also causing problems reading the value from the config.
* Use Home Assistant polling
* remove statement that can never happen
* Guard clause
* Reduce instance variables
* Implemented onkyo reconnect
Connection object is cleared after a failed command. It will be
automatically recreated upon the next command running. This should allow
for failed connections to be restored.
* Remove reduntant error catching
* Run all update commands with command wrapper.
* Handle errors better
* Removed unused global
I have no idea how that got there.
* First version of the MiFlora sensor (not yet finished)
* First workign version
* Added some documentation
Get name from sensor, if not defined
* Ignore IOError
* Added force_update option
* Updated comments
* Renamed fertility to conductivity (what it really is)
* MiFlora library update
* Updated helper files
* Formatting
* Fixed pylint errors
* Removed default from monitored conditions
* Removed KeyError handling as a KeyError should never be raised
* Added a return when no data is received
* emoved unnecessary return statement
* Changed default name
* Changes quotes and string operation ( @Teagan42 )
* - number of samples for median calculation is now configurable
- set state to None if no data could be polled from sensor
* Bugfix in library
more logging
* Fixed miflora version number
* Added Sensor Support for KNX Devices
Added Sensor for KNX Group Addresses
- Temperature
- Wind Speed
- Illuminance(LUX)
Mostly to fetch from a KNX Wetterstation
* Some pylint,flake8 fixes
* Pydoc Fixes
* Fix Coverage Ordering
* Refactor KNX Sensor
Refactor to Idea from @usul27 and added Minimum Maximum
* Removed Measurement Untis from const.py
Removed needed Measurement Units from const.py and add it to
sensor\knx.py
* Change .coveragerc
* Add as Requested from @Teagan42 the new Type Names
Additional add CONF_MINIMUM and CONF_MAXIMUM
* Added Changes as Requested from @Teagan42
* Fixed the Merge Conflict, Hopefully i done it rigth :-)
* Fixed Styling
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Test updating automatic
* Scan interval
* Schedule scan every time delta
* Pass around has
* Recursive issue
* Method invocation
* Oops
* Set up poll
* Default argument value
* Unused import
* Semicolon
* Fix tests
* Linting
* Unneeded throttle as it's handled by time event
* Use track time change event listener
* Disable lint rule
* Attribute removed - removing test
* Debug instead of info
* Unused import
* Add event loop to the core
* Add block_till_done to HA core object
* Fix some tests
* Linting core
* Fix statemachine tests
* Core test fixes
* fix block_till_done to wait for loop and queue to empty
* fix test_core for passing, and correct start/stop/block_till_done
* Fix remote tests
* Fix tests: block_till_done
* Fix linting
* Fix more tests
* Fix final linting
* Fix remote test
* remove unnecessary import
* reduce sleep to avoid slowing down the tests excessively
* fix remaining tests to wait for non-threadsafe operations
* Add async_ doc strings for event loop / coroutine info
* Fix command line test to block for the right timeout
* Fix py3.4.2 loop var access
* Fix SERVICE_CALL_LIMIT being in effect for other tests
* Fix lint errors
* Fix lint error with proper placement
* Fix slave start to not start a timer
* Add asyncio compatible listeners.
* Increase min Python version to 3.4.2
* Move async backports to util
* Add backported async tests
* Fix linting
* Simplify Python version check
* Fix lint
* Remove unneeded try/except and queue listener appproriately.
* Fix tuple vs. list unorderable error on version compare.
* Fix version tests
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Add open/closed state mapping for open_cover and close_cover
* Add 'open', 'closed' for open/close_cover_tilt
* Revert "Add 'open', 'closed' for open/close_cover_tilt"
This reverts commit e45582d439.
* BUG Message data cannot be changed thus use voluptuous to ensure format
* Pilight daemon expects JSON serializable data
Thus dict is needed and not a mapping proxy.
* Add explanation why dict as message data is needed
* Use more obvious voluptuous validation scheme
* Pylint: Trailing whitespace
* Extend schema
* Update ordering
* Add line breaks
* Align callback name with other platforms
* ALign callbackname with other platforms
* Update callback name to match other platforms
* Update callback name
* Update callback name
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Removed redundant assignment to CONF_WAYPOINT_IMPORT_USER
* Fixed zone test break and code style issues
* Fixed style issues
* Fixed variable scope issues for entities
* Fixed E302
* Do not install pip packages in tests
* EventBus: return function to unlisten
* Convert automation to entities with services
* Refactored zone creation based on code review feedback, enhanced configuration
* Added unit test to enhance waypoint_whitelist coverage
* Fix JSON encoder issue in recorder
* Fix tests docstring
* * Improved zone naming in waypoint import
* Added more test coverage for owntracks and zone
* Back to 0.28.0.dev0
* Code review feedback from @pavoni
* Added bitfield of features for flux_led since we are supporting effects
* Host should be optional for apcupsd component (#3072)
* Use voluptuous for file (#3049)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix linting
* Upgrade pyuserinput to 0.1.11 (#3068)
* Upgrade pyowm to 2.4.0 (#3067)
* improve isfile validation check (#3101)
* Refactor notification titles to allow for them to be None, this also includes a change in Telegram to only include the title if it's present, and to use a Markdown parse mode for messages (#3100)
* Fix broken test
* rfxtrx sensor clean up
* Bitcoin sensor use warning instead of error (#3103)
* Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107)
* Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Use voluptuous for xmpp (#3127)
* Use voluptuous for twitter (#3126)
* Use voluptuous for Fritzbox and DDWRT (#3122)
* Use Voluptuous for BT Home Hub (#3121)
* Use voluptuous for syslog (#3120)
* Use voluptuous for Aruba (#3119)
* Use constants, update configuration check, and ordering (Pilight) (#3118)
* Use contants, update configuration check, and ordering
* Fix pylint issue
* Migrate to voluptuous (#3113)
* Fix typo (#3108)
* Migrate to voluptuous (#3106)
* Update voluptuous (#3104)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Migrate to voluptuous (#3096)
* Migrate to voluptuous (#3084)
* Fixed Homematic cover (#3116)
* Migrate to voluptuous (#3069)
🐬
* Migrate to voluptuous (#3066)
🐬
* snapcast update (#3012)
* snapcast update
* snapcast update
* validate config
* use conf constants
* orvibo updates (#3006)
🐬
* Update frontend
* move units to temperature for climate zwave. wrong state was sent to mqtt cove
* Use voluptuous for instapush (#3132)
* Use voluptuous for Octoprint (#3111)
* Migrate to voluptuous
* Fix pylint issues
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Updated braviatv's braviarc version to 0.3.4 (#2997)
* Updated braviarc version to 0.3.4
* Updated braviarc version to requirements_all.txt
* Use voluptuous for Acer projector switch (#3077)
🐬
* Use voluptuous for twilio (#3134)
* Use voluptuous for webostv (#3135)
* Use voluptuous for Command line platforms (#2968)
* Migrate to voluptuous
* Fix pylint issues
* Remove FIXME
* Split setup test
* Test with bootstrap
* Remove lon and lat
* Fix pylint issues
* Add coinmarketcap sensor (#3064)
* Migrate to voluptuous (#3142)
🐬
* Back out insteon hub and fan changes (#3062)
* Move details to docs (#3146)
* Update frontend
* Use constants (#3148)
* Update ordering (#3149)
* Migrate to voluptuous (#3092)
* Display the error instead of the traceback (notify.slack) (#3079)
* Display the error instead of the traceback
* Remove name for check
* Automatic ODB device tracker & device tracker attributes (#3035)
* Migrate to voluptuous (#3173)
* Add voluptuous for tomato and SNMP (#3172)
* Improve voluptuous and login errors for Asus device tracker (#3170)
* Add exclude option to nmap device tracker (#2983)
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Added Xbox Live component (#3013)
* Added Xbox Live component
* Added Xbox Live sensor to coveralls
* Added init success checks
* Added entity id
* Adding link_names to post.message call (#3167)
If you do not turn link_names on, Slack will not highlight @channel and @username messages.
* Allow https (fixes#3150) (#3155)
* Use constants (#3156)
* Bugfix: ctach Runtime errors (#3153)
"RuntimeError: Disable scan failed" has been seen in a live installation
* Migrate to voluptuous (#3166)
🐬
* Migrate to voluptuous (#3164)
🐬
* Migrate to voluptuous (#3163)
🐬
* Migrate to voluptuous (#3162)
🐬 and 🍪 for fixing quotes!
* Exclude www_static from pydocstyle linting (#3175)
🐬
* Migrate to voluptuous (#3174)
* Migrate to voluptuous (#3171)
* Use voluptuous for mFi switch (#3168)
* Migrate to voluptuous
* Take change configuration into account
* Migrate to voluptuous (#3144)
🐬
* Add the occupancy sensor_class (#3176)
Such a complicated PR
* Update frontend
* Use voluptuous for Unifi, Ubus (#3125)
* Using alert with Hue maintains prior state (#3147)
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* MQTT fan platform (#3095)
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* Add Sphinx API doc generation (#3029)
* add's sphinx project to docs/ dir
* include core/helpers autodocs for API reference
* Allow reloading automation without restarting HA (#3002)
* Migrate to voluptuous (#3182)
🐬
* Migrate to voluptuous (#3179)
🐬
* Added scale and offset to the Temper component (#2853)
🐬
* Use voluptuous for BT and Owntracks device trackers (#3187)
🐬
* Correct binary_sensor.ecobee docs URL
* Use voluptuous for Hikvisioncam switch (#3184)
* Migrate to voluptuous
* Use vol.Optional
* Use voluptuous for Edimax (#3178)
🐬
* Use voluptuous for Bravia TV (#3165)
🐬
* Added support to 'effect: random' to Osram Lightify lights (#3192)
* Added support to 'effect: random' to Osram Lightify lights
* removed extra line not required
* Use voluptuous for message_bird, sendgrid (#3136)
* Try out the RTD theme
* Doc updates
* Update voluptuous for existing notify platforms (#3133)
* Update voluptuous for exists notify platforms
* fix constants
* Simple trend sensor. (#3073)
* First cut of trend sensor.
* Tidy.
* Migrate to voluptuous (#3193)
* Migrate to voluptuous (#3194)
🐬
* Migrate to voluptuous (#3197)
* Migrate to voluptuous (#3198)
🐬
* Use extend of PLATFORM_SCHEMA (#3199)
* Migrate to voluptuous (#3202)
🐬
* Updated to use the occupancy sensor_class (#3204)
🐬
* Migrate to voluptuous (#3206)
* Migrate to voluptuous (#3207)
* Migrate to voluptuous (#3208)
🐬
* Migrate to voluptuous (#3209)
🐬
* Migrate to voluptuous (#3214)
* Use voluptuous for SqueezeBox (#3212)
* Migrate to voluptuous
* Remove name
* Migrate to voluptuous and upgrade uber_rides to 0.2.5 (#3181)
* Migrate to voluptuous (#3200)
🐬
* Use Voluptuous for Luci and Netgear device trackers (#3123)
* Use Voluptuous for Luci and NEtgear device trackers
* str_schema shortcut
* Undo str_schema
* change update handling with variable for breack CCU2 (#3215)
* Update ordering (#3216)
* Docs update
* Flake8/pylint
* Add new docs requirements
* Update email validation (#3228)
🐬
* Fix email validation (fixes#3138) (#3227)
* Upgrade slacker to 0.9.25 (#3224)
* Upgrade psutil to 4.3.1 (#3223)
* Upgrade gps3 to 0.33.3 (#3222)
* Upgrade Werkzeug to 0.11.11 (#3220)
* Upgrade sendgrid to 3.4.0 (#3226)
* Bluetooth: keep looking for new devices (#3201)
* keep looking for new devices
* Update bluetooth_tracker.py
* change default value for tracking new devices
* remove commented code
* dlink switch added device state attributes and support for legacy firmware (#3211)
* Use voluptuous for free mobile (#3236)
* Use voluptuous for nma (#3241)
* Improve 1-Wire device family detection and error checking. Use volupt… (#3233)
* Improve 1-Wire device family detection and error checking. Use voluptuous
* Fix detection of gpio connected devices
* Replace rollershutter and garage door with cover, add fan (#3242)
* Use voluptuous for Alarm.com (#3229)
* Use voluptuous for gntp (#3237)
* Use voluptuous for pushbullet, pushetta and pushover (#3240)
* Migrate to voluptuous (#3230)
🐬
* Fix mFi sensors in uninitialized state (#3246)
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Use voluptuous for PulseAudio Loopback (#3160)
* Migrate to voluptuous
* Fix conf var
* Use voluptuous for Verisure (#3169)
* Migrate to voluptuous
* Update type and add missing config variable
* thread safe modbus (#3188)
* Upgraded fitbit to version 0.2.3 which fixed oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) (#3244)
* update ffmpeg version to 0.10 add get image to camera (#3235)
* Migrate to voluptuous (#3234)
* fix bugfix with unique_id (#3217)
* Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop
* zxt_120
* Wink not migrated to cover
* Clarifying debug
* too long line
* Only add 1 device entity
* Owntracks voluptuous fix (#3191)
* Zwave set temperature fix (#3221)
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
* Change PR to suggestion on gitter (#3243)
* Reload groups (#3203)
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* fix remove listener (#3196)
* Add linux battery sensor (#3238)
* protect service data for changes in calls (#3249)
* protect service data for changes in calls
* change handling
* move MappingProxyType to service call
* Fix issue #3250 (#3253)
* Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants
* Make API key optional
* issue #3250
* Add voluptuous to ecobee (#3257)
* Use constants and update ordering (#3261)
* Add support for complex template structures to data_template (#3255)
* Improve yaml fault tolerance and handle check_config border cases (#3159)
* Use voluptuous for nx584 alarm (#3231)
* Migrate to voluptuous
* Fix pylint issue
* fastdotcom from pypi (#3269)
* Use constants and update ordering (#3268)
🐬
* Use constants and update ordering (#3267)
🐬
* Add additional template for custom date formats (#3262)
I can live with a few visual line breaks 🐬
* Use constants and update ordering (#3266)
* Updated braviatv's braviarc version to 0.3.5 (#3271)
* Use voluptuous for Device Sun Light Trigger (#3105)
* Migrate to voluptuous
* Use default
* Point to master till archive is back (#3285)
* Pi-Hole statistics sensor (#3158)
* Add Pi-Hole sensor
* Update docstrings and remove print()
* Use None for payload
* Added stuff for support range setting (#3189)
* cleanup Homematic code (#3291)
* cleanup old code
* cleanup round 2
* remove unwanted platforms
* Update frontend
* Hotfix for #3100 (#3302)
* Fix TP-Link Archer C7 long passwords (#3225)
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* modbus write registers service (#3252)
* Fix bloomsky platform discovery (#3303)
* Remove dev tag
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Host should be optional for apcupsd component (#3072)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Fixed Homematic cover (#3116)
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Merge pull request #3130 from turbokongen/zwave_fixes
Bugfix. climate and covermqt
* Back out insteon hub and fan changes (#3062)
* Bump version
* Special frontend build for 0.27.2
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* Allow user to configure server id to perform speed test against
* Don't overwrite list
* Type-o
* Convert to string
* Append lists
* str(None) => 'None' did not realize that.
* Map Modes to setpoint indexes
* Fixes devices with no thermostat mode
* another try to fix devices without mode
* another try to fix devices without mode 2
* another try to fix devices without mode 3
* fix setting setpoint for devices with no mode
* fix setting setpoint for devices with no mode
* Update attr to property and default state method
* State prop is defined in parent class
* Demo platform fan
* PyDoc
* Copy-pasta artifact
* PyDoc
* Linting
* Raise error if turn_off and turn_on not implemented
* Update demo platform
* Initial unit test commit
* Readability
* Unneeded typing
* Should inherit from fan entity
* Turn off polling
* Initial oscillating flag
* Pass HASS into demo
* Typing
* Invoke set_speed instead of setting directly
* Service update
* Update demo tests
* Forgot to block after service call.
* linting
* Test to make sure not implemented is thrown
* Is On Method test
* Update const to match string
* Update services yaml
* Toggle method
* Toggle service
* Typing
* TYPE O
* Attribute check
* Type-o
* Type-o
* Put typing back
* ToggleEntity
* Linting
* Linting
* Oops
* Stale prints
* Demo support
* Initial code for alexa_local_control.
* Added support for creating a dummy username.
* Move SSDP responses to local variables.
* Added config validation via Voluptuous.
* Modify and remove unnecessary returned emulated bridge values.
* Remove script and scene domains from default exposed domains.
* Replaced Flask with HomeAssistantWSGI.
* Fix lint errors.
* Correcting grammar and spelling in docs and comments.
* Rename alexa_local_control to emulated_hue.
* Rename emulated_hue attributes.
* Fix a bug where something marked not exposed is exposed by default.
* Make sure the UPNP responder thread cleanly stops when HASS stops.
Also fix some config loading and lint errors.
* Fixed unexposed entities still having individual state exposed.
* Started writing tests for emulated_hue.
* Fix being able to set state of non-exposed entity.
* Another test for emulated_hue.
* More tests for emulated_hue.
Also slightly simplified emulated_hue's PUT handler.
* Fix bad test, sorry :/
* Third time's the charm.
* Fix lint and value validation tests.
* Rename emulated_hue bridge name.
* Remove license and documentation from header.
* Combine two if statements.
* Style changes.
* Fixed various issues and added some constants
* Use mqtt component to enable a MySensors MQTT gateway.
* Setup the MQTT gateway if mysensors config has mqtt as a value for
the key device in the list of gateways.
* Simplify two lines in the mqtt component.
* adding pull mode and relay time
* fixing failing tests
* removed unused vars, removed trailing whitespace
* removed white space
* split line in 2
* removed whitespace and fixed indent
* undid line break
* Update rpi_gpio.py
new line so its not too long
* back to no new line
* Moved long method to a new line
* Moved comment
* moved comment to above method
* adding required blank line
* fixed variables and made them optional
misunderstood the logic at first.
* removed line for lint and removed vars that were not required
* added second blank line for class
* added new configs to platform_schema - still have same error on load
* changing string to int
* added code to covers rpi as well
* Implement support for NEST structures.
* Conform to balloobbot style preferences.
* Log to debug level rather than info level.
* Use config validation to coerce list format if supplied as string.
* Use list comprehension for more succinct code.
* Conform to project linting standards.
* First draft for cover component
* Efficiency from @martinhjelmare
* migrate demo
* migrate demo test
* migrate command_line rollershutter
* migrate command_line test
* migrate rpi_gpio garage_door
* make some abstract methods optional
* migrate homematic
* migrate scsgate
* migrate rfxtrx and test
* migrate zwave
* migrate wink
* migrate mqtt rollershutter and test
* requirements
* coverage
* Update mqtt with garage door
* Naming and cleanup
* update test_demo.py
* update demo and core
* Add deprecated warning to rollershutter and garage_door
* Naming again
* Update
* String constants
* Make sure set_position works properly in demo too
* Make sure position is not set if not available.
* Naming, and is_closed
* Update zwave.py
* requirements
* Update test_rfxtrx.py
* fix mqtt
* requirements
* fix wink version
* Fixed demo test
* naming
* Add support for notifying with Slack messages.
When creating notifications, this allows you to pass in `attachments`
with the `data`. It's an array of attachments as defined in
https://api.slack.com/docs/message-attachments
When passing in attachments, message is still required, but it's okay to
be a blank string.
* Split over multiple lines
* Make sure attachments gets assigned, even if there isn't attachment data
* Added support for serial HM-Z19 CO2 sensor
* Minor pylint bug fixes
* Added new files to .coveragerc
* Removed newline
* Changes in requirements after change of pmsensor library
* Change the implementation of default name
* Check if serial interface is working before adding the sensor
* Maximum sensor value is 5000ppm
The repository already merged the pull request adding python3 support.
root is no longer required to use the gpio.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Clean-up, ordering, constants, and extend of schema
* Put REQUIREMENTS back and re-add line breaks
* Clean-up, ordering, constants, and extend of schema
* Extend platform
* Move secret cache out of loader so it can be referenced by other folders
* Unit test to verify secrets from another folder work & see if it overrides parent secret
* Clear secret cache after load
Current documentation suggests to use personal API tokens. This isn't
ideal because for a few reasons:
* messages will come as your own user, so it's hard to tell it's coming
from hass
* it's harder to manage if multiple people are using Slack and home
* assistant, since you'd have to coordinate rolling of it
It is possible to use Slack bot users already. Just make a new one from https://your-team.slack.com/apps/build/custom-integration, and use the token for that. You can even add an icon from the web frontend for home assistant.
However, the message will appear as a bot without a name or icon. This pull requests fixes this by passing the as_user parameter, which uses the bot user's name and icon.
One caveat is you need to invite the bot user into the room you want to
post to. This probably was an issue before though.
🎩 to @jnewland who pointed me to this in his branch
* Added support for name
Added name support and changed default name to "Forecast.io" since "Weather" had conflict with Yahoo weather and Open weather map
* Update forecast.py
* Added Bluetooth Low Energy device tracker
* Added new file(s)
* Fixed pylint errors
* Remove traling zeros from device names
* recreated deleted file
* Added requirements
* Renamed to bluetooth_le tracker
Removed gattlib from tests
Minor code cleanup
* - fixed .coveragerc bug
- changed discovery algorithm, new devices will only be added if seen 5 times to make sure
HA doesn't blow the database with devices just passing by
Currently there are only hw inputs in the sources list.
Other interesting inputs can be live tv (dvbt) and vod apps.
* add customize option for webos
* add short names for livetv, youtube, mako apps
* add current app as a source
* use large icon (largeIcon is the same as icon if doesn't exists)
* filter out hw inputs that are not connected
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Add action and callback support to html5 (#2855).
Remove registrations from the callback view since we always get the latest anyway.
We dont put an audience in the claims so we will never hit this error.
Bring tests back up to where they were before callbacks.
Only import jwt where necessary
Fix bracket spacing errors
Fix JWT decode check for loop
Remove stale comment.
Add tests for the callback system.
Shorten line
Disable pylint broad-except and change e to jwt_decode_error.
Verify expiration
Remove duplicate jwt.exceptions.DecodeError
Catch no keys matched and return False
* Switch to using registrations for callbackview instead of json_path
* Only check for URL and such if the data object actually exists
* raise instead of return
* cleanup decode_jwt
* Clean up JWT errors
* Correctly set status_code to 401
* Improve JWT by adding target to claims and attempting to check the given target for a decode match first, as well as pass the target through in the event payload.
* Add tag support and fix formatting issues
* Pass through any keys that dont apply to the payload into the notification.data dictionary
* Remove stale print
* Pass back the data dictionary if it exists
* Actually put the default url even if a notify payload dictionary doesnt exist
* pylint, flake8
* Add subscription validation
* Add validation for the callback event payload and use constants where possible
* Use HTTP_UNAUTHORIZED instead of 401
* Change callback dictionary to dict instead of cv.match_all
* Fix up tests and make subscription required
* Whoops, that test was supposed to fail
* Use the result of CALLBACK_EVENT_PAYLOAD_SCHEMA as event_payload
* Add a test for html5 callback decode_jwt where the device has been renamed since notification has been sent.
* Remove the loop through logic, assume that target is always in JWT
* Always return something instead of possibly None.
* Update frontend
* Add a group notify platform which allows sending a single notification to multiple platforms.
* Correctly sort group.py
* Clean up the payload logic
* Make name and entity id required in the schema
* Deep update the dictionary to fix a bug where data wasnt merging.
* Add notify.group tests.
* Improve docstrings.
* Change entities to services and entity_id to service
* Make service a slug without a default value
* Update tests for entities->services, entity_id->service
* vol.Any(cv.slug) -> cv.slug
* First pass on providing individual services for all possible targets that a notification platform supports.
* Add a quite hacky first version of notification groups
* Add a docstring for get_targets
* Register group service under notifygroup/ and safely check for notifygroups in config
* Remove notifygroups, because it belongs in its own PR
* Make @balloob requested changes
* get_targets()->targets
* Add tests for notify targets exposed as individual services
* If we dont have a platform name set in configuration, lets use the name of the platform instead of notify
* Fix test docstring.
* Dont use a dictionary for just one value
* No need to double slugify
* targets is now just a list of strings instead of a dict
* Support passing an email address linked to Gravatar as the picture in known_devices.
* Add a dedicated field for Gravatar
* Bring tests back up to where they were before Gravatar.
* Add tests for Gravatar.
* Retry sending the push for 1 day instead of failing instantly if the target is unavailable
* Add timestamp to push payload
* Correctly use the title and body fields for their intended purposes
* Add callback support
* Revert changes to frontend files.
* Add default URL which will open Home Assistant. Also put all the data into the data object of the payload so it is accessible in the browser. Without doing this, things like URL wouldnt be accessible.
* Flake8 and pylint fixes
* event->type
* Dont send the default url if actions exist
* flake8/pylint fixes again
* Update html5 tests
* Remove callbacks from this branch, will re-stage on a different branch
* Remove remnant of callbacks
* Add url to data dictionary if it exists instead of copying the entire data dictionary in
* flake8 fix
* Add FritzBox call monitor sensor
* Correct docstrings and suppress too few public methods warning
* Remove blank lines after docstrings
* Add blank lines after class docstrings
* Remove trailing white space
* Make daemon; add reconnect on disconnect
* HP ILO component
* HP ILO component
* Add Onboard Administrator sensor
* Add Onboard Administrator sensor
* Add period to first line
Fix D400 error on line 1
* Fix log message for deprecated temp key
* Use string formatting and pass constant variables as arguments in log
message to show correct name of config keys.
* Fix import order
* Initial work to add Chrome Push Notification support
* Remove push.js from home-assistant since it is now in Polymer
* Chrome->HTML5, general cleanup/fixes
* Make html5 generic, move manifest.json into frontend so that we can dynamically add the gcm_sender_id
* Pylint, flake8, pydocstyle frontend init
* HTML5 push fixes
* Update polymer
* Remove crypto req
* Add notify default platform.
* Fix HTML5 push
* Registration fixes
* Linting fix
* pep257 fix
* Add tests
* pep257 fix
* Update frontend
* Implemented range checking for temperature and humidity. Out-of-range values will be ignored
* Removed unused import
* Use celsius_to_fahrenheit conversion method
* Add support for GPSD
* Add gpsd.py
* Check if socket is open
* Fix pylint issue
* Rename file to be a sensor
* Update for being a sensor
* Rework for being a sensor
* Add support for new mqtt_json light platform.
* Fix W503 errors.
* Bring in feedback from @balloob.
* Add test coverage for invalid color and brightness data.
* Add coverage for transition in turn_off.
* New component to interface with a pilight-daemon for RF send/receive
* Fix bug that changed the received data, add connected flag, clean up
* New pilight switch component
* New optional whitelist filter to filter uninteressting devices
* Add pilight
* PEP8: too long lines, white spaces
* To keep up the good coverage ...
* PEP 257
* pylint enhancements
* pylint enhancements
* PEP 257
* Better HA config validation and cleanup following code review for #2742
* Fix requirenments to require fixed pilight version
* Change config validation to use voluptuous
* Pilight switch exclude not needed due to wildcard pilight exclude
* Enhance configuration parsing using voluptuous
* Added optional embedded image attachments to notify.smtp.
Also restructured a bit to minimize code duplication and add some tests.
* Fixed formatting errors.
* SMTP cleanups thanks to code review.
* Add a Foursquare component which accepts push notifications from Foursquare and provides a user checkin service
* @balloob requested fixes
* Sort .coveragerc list of components by name
* Revert "Sort .coveragerc list of components by name"
This reverts commit 997ae22576.
* Only sort Foursquare since I get conflicts otherwise
* Add Foursquare checkin service to services.yaml
* Update to latest Plex API, add music support.
* Fix PyLint errors.
* Update Plex sensor module to latest PlexAPI.
* Oops - update Python sensor import.
* According to PlexAPI docs, this is the new API for Plex Pass members.
* More pylint STFUs.
* Move pylint suppression.
* Use plexapi NA type directly.
* Pylint objects to short variable names.
The 0.3.1 version of the library includes fixes for time syncing the
thermostat under the covers when needed. All changes are done on the
library side, we just need to bump the required level in home
assistant.
* Fix: Circular dependencies of internal files
* Change: dt.date for Date and dt.datetime for DateTime
* Use NewType if available
* FIX: Wrong version test
* Remove: Date and DateTime types due to error
* Change to HomeAssistantType
* General Improvement of Typing
* Improve typing config_validation
* Improve typing script
* General Typing Improvements
* Improve NewType check
* Improve typing db_migrator
* Improve util/__init__ typing
* Improve helpers/location typing
* Regroup imports and remove pylint: disable=ungrouped-imports
* General typing improvements
Add unit symbol constants
Initial unit system object
Import more constants
Pydoc for unit system file
Import constants for configuration validation
Unit system validation method
Typing for constants
Inches are valid lengths too
Typings
Change base class to dict - needed for remote api call serialization
Validation
Use dictionary keys
Defined unit systems
Update location util to use metric instead of us fahrenheit
Update constant imports
Import defined unit systems
Update configuration to use unit system
Update schema to use unit system
Update constants
Add imports to core for unit system and distance
Type for config
Default unit system
Convert distance from HASS instance
Update temperature conversion to use unit system
Update temperature conversion
Set unit system based on configuration
Set info unit system
Return unit system dictionary with config dictionary
Auto discover unit system
Update location test for use metric
Update forecast unit system
Update mold indicator unit system
Update thermostat unit system
Update thermostat demo test
Unit tests around unit system
Update test common hass configuration
Update configuration unit tests
There should always be a unit system!
Update core unit tests
Constants typing
Linting issues
Remove unused import
Update fitbit sensor to use application unit system
Update google travel time to use application unit system
Update configuration example
Update dht sensor
Update DHT temperature conversion to use the utility function
Update swagger config
Update my sensors metric flag
Update hvac component temperature conversion
HVAC conversion for temperature
Pull unit from sensor type map
Pull unit from sensor type map
Update the temper sensor unit
Update yWeather sensor unit
Update hvac demo unit test
Set unit test config unit system to metric
Use hass unit system length for default in proximity
Use the name of the system instead of temperature
Use constants from const
Unused import
Forecasted temperature
Fix calculation in case furthest distance is greater than 1000000 units
Remove unneeded constants
Set default length to km or miles
Use constants
Linting doesn't like importing just for typing
Fix reference
Test is expecting meters - set config to meters
Use constant
Use constant
PyDoc for unit test
Should be not in
Rename to units
Change unit system to be an object - not a dictionary
Return tuple in conversion
Move convert to temperature util
Temperature conversion is now in unit system
Update imports
Rename to units
Units is now an object
Use temperature util conversion
Unit system is now an object
Validate and convert unit system config
Return the scalar value in template distance
Test is expecting meters
Update unit tests around unit system
Distance util returns tuple
Fix location info test
Set units
Update unit tests
Convert distance
DOH
Pull out the scalar from the vector
Linting
I really hate python linting
Linting again
BLARG
Unit test documentation
Unit test around is metric flag
Break ternary statement into if/else blocks
Don't use dictionary - use members
is metric flag
Rename constants
Use is metric flag
Move constants to CONST file
Move to const file
Raise error if unit is not expected
Typing
No need to return unit since only performing conversion if it can work
Use constants
Line wrapping
Raise error if invalid value
Remove subscripts from conversion as they are no longer returned as tuples
No longer tuples
No longer tuples
Check for numeric type
Fix string format to use correct variable
Typing
Assert errors raised
Remove subscript
Only convert temperature if we know the unit
If no unit of measurement set - default to HASS config
Convert only if we know the unit
Remove subscription
Fix not in clause
Linting fixes
Wants a boolean
Clearer if-block
Check if the key is in the config first
Missed a couple expecting tuples
Backwards compatibility
No like-y ternary!
Error handling around state setting
Pretty unit system configuration validation
More tuple crap
Use is metric flag
Error handling around min/max temp
Explode if no unit
Pull unit from config
Celsius has a decimal
Unused import
Check if it's a temperature before we try to convert it to a temperature
Linting says too many statements - combine lat/long in a fairly reasonable manner
Backwards compatibility unit test
Better doc
This commit adds a new config option to the heat_control thermostat
component, min_cycle_duration. Some heaters and/or ACs don't like
being constantly cycled on and off. Prior to this patch the
heat_control component can end up cycling the switch quite
frequently. (depending on how quickly the temperature changes) The
new option added is used for setting a minimum duration that must
have elapsed in either the on or off state before the thermostat will
send the service call to cycle the switch. This should enable users to
hand tune how frequently heat_control can switch the device on or off
to best suit the device being used.
This commit adds a new option to the heat_control component, ac_mode.
When set to true, this treats the toggle device as a cooler instead
of a heater. The concept being if you have a window or in-wall ac
unit that doesn't have a built-in thermostat having the home assistant
implemented thermostat would be as useful as for space heaters.
Instead of always assuming we want to change the heat, instead use the
setback attribute which sets heat / cool setback based on current HVAC
mode. This means that the proliphix thermostat will do sensible things
during cooling season.
* Added mired and kelvin mode to flux
* changed as requested
* Renamed varible
* attempt to add test for new method in flux.py
* removed line to fix lint error
* Allow multiple proximities
* Distance conversion
* Add unit of measurement and conversion to proximity
* Shorten attribute name
* Fix get unit of measurement
* Fix the km <-> m conversion
* Add type check and errors
* first path unit test around distance utility
* Fix numeric type check
* Fix conversion type-os
* Actually set the exception thrown flag
* Test for exact conversion
* More descriptive variable names
* Update method invocation to match change in method name
* Missed a couple variables
* Line continuation
* Fix linting too many return issue
* Break out proximity setup for list of proximity and for single proximity device
* Pass hass to setup function
* Check if setup succeeded for each proximity component
* Change variable name
* Break out branches in convert to avoid too many branches linting error
* Remove disable lint line
* Variables for default properties
* Combine logic
* Test loading multiple proximities for 100% code coverage on proximity component
* Unit test to reach 100%
Fail to configure proximities missing devices
* Fail first before processing
* Combine return statements
* lstrip = bad Teagan
* Utilize string formating instead of concatenation
* Fix variable reference
* Typeo
* Clean up conversion to reduce complexity
* Update unit tests to match code changes on distance util
* Test non numeric value
* Private methods, value type has already been checked.
I don't know if this is the right place for this, but I'm tired of having to install mysqlclient or psycopg2 after every docker update if I want to use mysql of postgres.
* Add group state for locks
Added ", (STATE_LOCKED, STATE_UNLOCKED)" to _GROUP_TYPES
Don't have a working HA right now, so can't test..
* Modified from homeassistant.const import
* Removed white space
* Line length change
* Removed white space.. again!
* Initial media_player component for the MPC-HC web API.
* Update .coveragerc to exclude the MPC-HC media player component.
* We don't need a session for every HTTP fetch.
* Use host in configuration YAML to match Kodi component.
* Fix PyLint errors.
* Fix PEP8 errors and use more idiomatic Python to get dict() values.
* Add MPC-HC remote command capabilities for basic control.
* Hyperion lets you turn it on and off
* Update hyperion to use recent API functions
The plugin now gets the active color from the server.
Add a configuration option "default_color" to customize the turn_on color.
* Use local timezone for log and history dates
* home-assistant-js fix
* Submodule updates not included so travis can build
* Separate Date and DateTime http validators
* Include submodule reference
* Update frontend
* slugify() for dev_id (fixes#2162) [Keep space replacement to not impact known_devices.yaml]
* pyicloud upgrade 0.9.1
* config validation
* Only poll icloud every 4 minutes...
* Immediately pull device state on HASS start
* Added new test with icloud char e' acute [chr(233)]
* Suppress pyicloud logging
* Make sure values are updated regardles of manual or frontend update,
* Devices with set_switch command was not happy with fast updating.
* Binary triggersensors command was not happy with refreshed updating.
Fixes#2611
Adds a timeout kwarg to call_service and API.__call__ with default set
to 5 (as per previous behavior). Will not change existing behavior but
will allow remote Python API calls to specify a longer (or shorter)
timeout if they know that a script takes longer than 5 seconds to
return.
* Major rewrite of the KNX multi address device. This class wasn't used before, but the new class will be the base for the LNX thermostat module
* newer KNXIP version needed as the previous version had a serious bug
* Update knxip to later version
* Added thermostat module
* First implementation of a KNX thermostat module
* Minor cleanup
* Removed unsed code
* Update recorder.
models.py:
- Use scoped_session in models.py to fix shutdown error
__init__.py:
- Session _commit & retry method
- Single session var for purge_data
- Ensure single _INSTANCE
- repeat purge every 2 days
- show correct time in log_error
* _commit
* Restore models to old functionality, swap purge, remove _INSTANCE cleanup from tests, typing ignore Base class
* pylint
* Remove recorder from model unit test
* Fix deprecated(moved) import
* Add util/dt typing
* Green on mypy util/dt
* Fix some errors
* First part of yping util/yaml
* Add more typing to util/yaml
* Add __main__ type hints
* Fix most errors of __main__
* Add ignore for script.run()
* Add type annotations for from_config_dict and from_config_file
* Fix errors
* Fix requirement error
* Add mypy type check to tests
* Enable travis typing check
* Messed up the tox deps
* Laxer type checker
* Add power attribute to switch.
* Move device_state_attributes into base class.
* Fix imports following refactor.
* Bump pyvera version - should add contributed support for older (UI5) version dimmers and locks.
* Refactor device lookup to be based on vera classes, push category back into library.
* Add generic power attribute, fix inherited class order bug.
* Tidy.
* add media_player/clear_playlist and line-in/tv support to sonos
* add support source radio
* fix bug
* print TV/Line-In as media_title
* implement universal player
* add to demo platform
* Update demo.py
Better handling for demo object
* add unit tests
* fix unit test
* Allow owntracks entity for google travel times
* Added ability to use sensor state as location
* Added zone checks for google travel timesg
* Updated to use global constents and the location helper
* Fixed type in method name and removed redundant validation
* Changed domain condition to be a bit more elegant
* Updated to allow friendly name in any instance including the config
* Fixed bad python syntax and used helper methods
* add hvac mode support to radiotherm
off/cool/heat/auto modes are supported
* Moved STATE_AUTO to thermostat component, fix lint
Moved STATE_AUTO to thermostat platform. Fixed lint error.
* initial support for Join notifier
add more functions for Join
* rename to joaoapps_join
add message default in schema
move api_key check
* move special join services to their own component
update coveragerc and requirements_all
add icon and smallicon
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Revert "Clamp brightness between 0 and 255"
This reverts commit c87238e8b5.
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Imap unread email sensor
Checks the inbox of a imap account for unread emails. Tested against
gmail.
Example config:
```
sensor:
- platform: imap
name: gmail test
user: USER
password: PASSWORD
server: imap.gmail.com
port: 993
```
* added to .coveragerc
* Code cleanup and typo fix.
* Added port range validation
* Fix lint errors
* Implementation of a KNX platform driver and a KNX switch
* Starting working on a KNX thermostat implementation
* Removed KNX thermostat implementation from this branch again
* Make gateway parameter optional (can be auto-detected in many cases)
* Removed check for double initialisation
* KNX messages now will be handled internally and not send to the Home Assistant message bus
* Call update_ha_state only if should_poll is false
* Removed unused HASS variable
* knxip library version changed
* pylint optimization
* New Switch Platform: TPLink Switch (HS100 / HS110)
### Information
The TPLink switch platform allows you to control the state of your TPLink Wi-Fi Smart Plugs.
Supported devices (tested):
HS100 (UK)
It should also work with the HS110.
To use your D-Link smart plugs in your installation, add the following to your configuration.yaml file:
"""
# Example configuration.yaml entry
switch:
platform: tplink
host: IP_ADRRESS
name: TPLink Switch
"""
### Configuration variables:
host (Required): The IP address of your TPlink plug, eg. http://192.168.1.105
name (Optional): The name to use when displaying this switch.
* Update tplink.py
Bug fixes
* Separate to a standalone library
* Removed unnecessary imports
* Code cleanup and update reference library link
* TPLink switch support (#2453)
* updated requirements
* Update unifi.py
Add support for a site that is not the default within the Unifi Controller.
i.e. A controller with multiple sites:
- Home
- Friends
- Parents (default)
Supplying the identifier for 'Home' now means that the devices tracked will be associated with 'Home'.
* Update test_unifi.py
Fix test modules as well.
* Switch to SQLAlchemy for the Recorder component. Gives the ability to use MySQL or other.
* fixes for failed lint
* add conversion script
* code review fixes and refactor to use to_native() model methods and execute() helper
* move script to homeassistant.scripts module
* style fixes my tox lint/flake8 missed
* move exclusion up
Default behavior for warm/cold white channels is to assume the white
channel is mixed with the rgb. This is a sane default and should support
the Fibaro RGBW LED controller.
* Replace switch with lock
* Update docstrings
* Add link to docs
* Add link to docs and update docstrings
* Update docstring
* Update docstrings and fix typos
* Add link to docs
* Add link to docs
* Add link to docs and update docstrings
* Fix link to docs and update docstrings
* Remove blank line
* Add link to docs
* Support more types of 1wire sensors and bus masters
- Added support for DS18S20, DS1822, DS1825 and DS28EA00 temperature sensors
- Added support for bus masters which use fuse to mount device tree.
Mount can be specified by 'mount_dir' configuration parameter.
* Correct the lint problem
* Stick version numbers
* Move elevation to core config
* Migrate forecast test to requests-mock
* Migrate YR tests to requests-mock
* Add requests_mock to requirements_test.txt
* Move conf code from bootstrap to config
* More config fixes
* Fix some more issues
* Add test for set config and failing auto detect
* Depreciate ssl2/3
Following the best practices as defind here:
https://mozilla.github.io/server-side-tls/ssl-config-generator/
* Updated comment with better decription
Links to the rational rather than the config generator; explains link.
* add comment mentioning intermediate
* Fix move_up and move_down
I managed to switch up the zwave move_up and move_down commands.
This PR fixes it.
Thank you @nunofgs for bringing this to my attention :)
* Fix for aeotec 6 multisensor
This commit fixes an issue with the use of None in default values
for the config get() calls in __init__() of AsusWrtDeviceScanner.
These values are cast as strings and when a NoneType is cast it
returns the string "None" this broke the check for the existence
of these fields. This commit fixes the issue by changing the default
value to be an empty string '' which will conform with the behavior
expected by the ssh login code.
Closes#2343
* Add support for wind, battery, radio signals
* Fix indentation error
* second indentation fix
* Fix for pylint too many statements error
* Moving "pylint: disable=too-many-statements"
* Added Sony Bravia support to HA
* Improvements to make it work on my poor raspberry 1
* Just a typo
* A few fixes in order to pass pylint
* - Remove noqa: was due to the 80 characters max per line restriction
- Move communication logic to a separate library at https://github.com/aparraga/braviarc.git
- Added dependency and adapt the code according to that
* A few improvements
* Just a typo in a comment
* Rebase from HM/dev
* Update requirements by executing the script/gen_requirements_all.py
* More isolation level for braviarc lib
* Remove unnecessary StringIO usage
* Revert submodule polymer commit
* Small refactorization and clean up of unused functions
* Executed script/gen_requirements_all.py
* Added a missing condition to ensure that a map is not null
* Fix missing parameter detected by pylint
* A few improvements, also added an empty line to avoid the lint error
* A typo
* Basic implementation of Zwave Rollershutters
* Better filtering, by @wokar
* Fix typo
* Remove polling from component, and loop fix
* linter fix
* Filter to channel devices to correct component
* Remove overwriting of parent node name
* Created a new platform for envisalink-based alarm panels (Honeywell/DSC)
* Added a sensor component and cleanup
* Completed initial development.
* Fixing pylint issues.
* Fix more pylint issues
* Fixed more validation issues.
* Final pylint issues
* Final tweaks prior to PR.
* Fixed final pylint issue
* Resolved a few minor issues, and used volumptous for validation.
* Fixing final lint issues
* Fixes to validation schema and refactoring.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#
**Pull request in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io) with documentation (if applicable):** home-assistant/home-assistant.github.io#<home-assistant.github.io PR number goes here>
**Example entry for `configuration.yaml` (if applicable):**
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
**Checklist:**
## Checklist:
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
- [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
If code communicates with devices:
If the code communicates with devices, web services, or third-party tools:
- [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
@@ -26,8 +26,5 @@ If the code does not interact with devices:
- [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
- [ ] Tests have been added to verify that the new code works.
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the Apache 2.0 license; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the Apache 2.0 license; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it) is maintained indefinitely
and may be redistributed consistent with this project or the open
source license(s) involved.
```
## Attribution
The text of this license is available under the [Creative Commons Attribution-ShareAlike 3.0 Unported License](http://creativecommons.org/licenses/by-sa/3.0/). It is based on the Linux [Developer Certificate Of Origin](http://elinux.org/Developer_Certificate_Of_Origin), but is modified to explicitly use the Apache 2.0 license
and not mention sign-off.
## Signing
To sign this CLA you must first submit a pull request to a repository under the Home Assistant organization.
## Adoption
This Contributor License Agreement (CLA) was first announced on January 21st, 2017 in [this][cla-blog] blog post and adopted January 28th, 2017.
Everybody is invited and welcome to contribute to Home Assistant. There is a lot to do...if you are not a developer perhaps you would like to help with the documentation on [home-assistant.io](https://home-assistant.io/)? If you are a developer and have devices in your home which aren't working with Home Assistant yet, why not spent a couple of hours and help to integrate them?
Everybody is invited and welcome to contribute to Home Assistant. There is a lot to do...if you are not a developer perhaps you would like to help with the documentation on [home-assistant.io](https://home-assistant.io/)? If you are a developer and have devices in your home which aren't working with Home Assistant yet, why not spent a couple of hours and help to integrate them?
The process is straight-forward.
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/devel/faster_reviews.md) by Kubernetes (but skip step 0)
- Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
- Write the code for your device, notification service, sensor, or IoT thing.
- Ensure tests work.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
Still interested? Then you should read the next sections and get more details.
Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details.
## Adding support for a new device
For help on building your component, please see the [developer documentation](https://home-assistant.io/developers/) on [home-assistant.io](https://home-assistant.io/).
After you finish adding support for your device:
- Check that all dependencies are included via the `REQUIREMENTS` variable in your platform/component and only imported inside functions that use them.
- Add any new dependencies to `requirements_all.txt` if needed. Use `script/gen_requirements_all.py`.
- Update the `.coveragerc` file to exclude your platform if there are no tests available or your new code uses a 3rd party library for communication with the device/service/sensor.
- Provide some documentation for [home-assistant.io](https://home-assistant.io/). It's OK to just add a docstring with configuration details (sample entry for `configuration.yaml` file and alike) to the file header as a start. Visit the [website documentation](https://home-assistant.io/developers/website/) for further information on contributing to [home-assistant.io](https://github.com/home-assistant/home-assistant.io).
- Make sure all your code passes ``pylint`` and ``flake8`` (PEP8 and some more) validation. To check your repository, run `tox` or `script/lint`.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
- Check for comments and suggestions on your Pull Request and keep an eye on the [CI output](https://travis-ci.org/home-assistant/home-assistant/).
If you add a platform for an existing component, there is usually no need for updating the frontend. Only if you've added a new component that should show up in the frontend, there are more steps needed:
- Update the file [`home-assistant-icons.html`](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/components/frontend/www_static/polymer/resources/home-assistant-icons.html) with an icon for your domain ([pick one from this list](https://www.polymer-project.org/1.0/components/core-elements/demo.html#core-icon)).
- Update the demo component with two states that it provides.
- Add your component to `home-assistant.conf.example`.
Since you've updated `home-assistant-icons.html`, you've made changes to the frontend:
- Run `script/build_frontend`. This will build a new version of the frontend. Make sure you add the changed files `frontend.py` and `frontend.html` to the commit.
### Setting states
It is the responsibility of the component to maintain the states of the devices in your domain. Each device should be a single state and, if possible, a group should be provided that tracks the combined state of the devices.
A state can have several attributes that will help the frontend in displaying your state:
-`friendly_name`: this name will be used as the name of the device
-`entity_picture`: this picture will be shown instead of the domain icon
-`unit_of_measurement`: this will be appended to the state in the interface
-`hidden`: This is a suggestion to the frontend on if the state should be hidden
These attributes are defined in [homeassistant.components](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/components/__init__.py#L25).
### Proper Visibility Handling
Generally, when creating a new entity for Home Assistant you will want it to be a class that inherits the [homeassistant.helpers.entity.Entity](https://github.com/home-assistant/home-assistant/blob/master/homeassistant/helpers/entity.py) class. If this is done, visibility will be handled for you.
You can set a suggestion for your entity's visibility by setting the hidden property by doing something similar to the following.
```python
self.hidden=True
```
This will SUGGEST that the active frontend hides the entity. This requires that the active frontend support hidden cards (the default frontend does) and that the value of hidden be included in your attributes dictionary (see above). The Entity abstract class will take care of this for you.
Remember: The suggestion set by your component's code will always be overwritten by user settings in the configuration.yaml file. This is why you may set hidden to be False, but the property may remain True (or vice-versa).
### Working on the frontend
The frontend is composed of [Polymer](https://www.polymer-project.org) web-components and compiled into the file `frontend.html`. During development you do not want to work with the compiled version but with the seperate files. To have Home Assistant serve the seperate files, set `development=1` for the *http-component* in your config.
When you are done with development and ready to commit your changes, run `build_frontend`, set `development=0` in your config and validate that everything still works.
## Testing your code
To test your code before submission, used the `tox` tool.
```bash
> pip install -U tox
> tox
```
This will run unit tests against python 3.4 and 3.5 (if both are available locally), as well as run a set of tests which validate `pep8` and `pylint` style of the code.
You can optionally run tests on only one tox target using the `-e` option to select an environment.
For instance `tox -e lint` will run the linters only, `tox -e py34` will run unit tests only on python 3.4.
### Notes on PyLint and PEP8 validation
In case a PyLint warning cannot be avoided, add a comment to disable the PyLint check for that line. This can be done using the format `# pylint: disable=YOUR-ERROR-NAME`. Example of an unavoidable PyLint warning is if you do not use the passed in datetime if you're listening for time change.
Home Assistant |Build Status| |Coverage Status| |Join the chat at https://gitter.im/home-assistant/home-assistant| |Join the dev chat at https://gitter.im/home-assistant/home-assistant/devs|
Home Assistant is a home automation platform running on Python 3. The
goal of Home Assistant is to be able to track and control all devices at
home and offer a platform for automating control.
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
To get started:
@@ -12,81 +10,22 @@ To get started:
python3 -m pip install homeassistant
hass --open-ui
Check out `the website<https://home-assistant.io>`__ for `a
The system is built using a modular approach so support for other devices or actions can be implemented easily. See also the `section on architecture <https://home-assistant.io/developers/architecture/>`__ and the `section on creating your own
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
