* Fix colortemp conversion for osramlightify
Copied from the LIFX fix in 75df4be733.
* Fix style
* Updates from review
@armills:
While we're doing cleanup here, can you just change self._brightness,
self._rgb, self._name, self._temperature, and self._state assignments in
__init__ to None? These will get overwritten when self.update() is called, so
it's safer/cleaner to initialize them to None since it shouldn't matter if
everything is working.
This increases the global limit to 6535 seconds (1h48m55s) because that is
supported by all light platforms.
Some platforms support even longer transition times so the limit should
actually be platform specific.
* Allow configurable conditions for Pi-Hole sensor
* Include all three conditions by default
* Share Pi-Hole API data across all sensors; eliminate redundant API calls
* Add effect support to MQTT Light
* Use effect state topic for supported_features
* Dont use rainbow as default color
* Add color_temp support to MQTT JSON Light
* Add effect to MQTT JSON light
* Support lights in MQTT discovery
* Allow discovered devices to set their platform
* Add white value support to MQTT Light
* Add white value support to MQTT JSON Light
* Remove blank line
* Add color_temp support to MQTT Template light
* Add white value support to MQTT Template Light
* Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template
* Add XY Color to MQTT Light Platform
* Fix syntax
* Fix more syntax errors
* Revert "Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template"
This reverts commit c03798cb63.
* MQTT Template supports flash and transition but doesnt allow templating of the values
* Add XY color support to MQTT JSON
* Proper variable names
* Only allow whitelisted MQTT platforms to be loaded via MQTT Discovery
* Minor tweaks.
* Add support for remove services / Reload script support
* Reload support for scripts
* Add more unittest for services
* Add unittest for script reload
* Address paulus comments
* Passing pep8, no tests yet
* Fixed some issues with the request throttling
* Removed ability to set throttle time because it was causing more issues than it was worth
* Added blink to .coveragerc
* Changed blinkpy version
* Removed global var, fixed per PR requests
* Added services for camera, migrated switch to binary_sensor
* Added schema for service, fixed naming, removed unused function
Current implementation of connection status doesn't follow convention and is not properly configurable. Might be added again in the future as a full fledged entity or some other way.
For now users can rely on error logging to determine connection status.
* Update to pylgtv 0.1.4
* Send icon with webostv notifications
Default to the homeassistant logo, but allow customizing it on the
component and for individual notifications
* Wait up to 9 seconds
* Set number of recorder retries to 8
* Do not sleep when reporting last connection error if no retries left
* Make sure we clean up old engine if connection is retrying
* Update __init__.py
* Use bundled certificates if port matches mqtts
* Move import requests.certs to top, since it's used in more places
* Add happy and non-happy path tests for default certificate bundle on mqtts port
* Add Zwave refresh services
* services file
* Use dispatcher
* Add zwave prefix to signal
* Delay zwave updates for 100ms to group them.
* Fixes
* lint
* Access _scheduled_update from loop thread only.
* More async
* Some optimizations
* Fix
Message deletion in IMAP is a two step process: first delete, then expunge.
Deleting a message just sets a flag that usually makes the mail client hide
the message. It is the expunge that actually removes the message.
Thus, exclude the deleted messages so that the unread count matches up with
that of most mail clients.
A LIFX bulb maintains its previous color even when the light is off.
For example, if the previous color is blue and the bulb is turned on
and then set to a red color, it will transition through purple colors.
After this commit, the target color is set while the bulb is still
turned off. This overrides the previous color and brightness that the
bulb remembered. The light is then turned on with the requested
transition duration.
For the example, this gives the expected result of only going through
red colors.
* Add ComEd RRTP price sensor
* Update wording to reflect ComEd's naming change from 'RRTP' to 'Hourly Pricing'
* Changed name of sensor source file
* Cleanup based on requested changes
* More cleanup
* small cleanups
* Don't initialize components which have already been discovered (fixes#5588)
* Don't log that we've found a service unless we know it's not a duplicate
* Encode discovery data hash with JSON
This also solves the issue of trying to hash non-hashable objects like dicts
* Add test for duplicate device discovery
* Don't initialize components which have already been discovered (fixes#5588)
* Don't log that we've found a service unless we know it's not a duplicate
* Encode discovery data hash with JSON
This also solves the issue of trying to hash non-hashable objects like dicts
* Add test for duplicate device discovery
* Added support for multiple codes executed in a row
now codes can be specified either by simply providing a single code, which will then be sent like usual, or multiple codes can be executed in a row, specified in a comma delimited format in the configuration.yaml. For example: 111111,222222,333333,444444 would mean 111111 would be sent first, followed by 222222 and 333333 and 444444.
* rpi_rf: added line breaks to not exceed 79 characters per line
* include validation for correct formatting of codes
added regex which only allows either a single number (like 1252456245) or a sequence of commas followed by another number.
* added line breaks to not exceed 79 characters per line
* fix for 'continuation line under-indented for visual indent'
* another try at 'continuation line under-indented for visual indent'
* changed from regex to list for easier maintainability
* removed unnecessary splitting of strings
* Update to Current RGB D65 Conversion
As per Philips Hue https://developers.meethue.com/documentation/color-conversions-rgb-xy
* Update the source of the XYZ to RGB formulas
* Fix Whitespace
* Update Whitespace
* Update Tests for new Formulas
* Update Tests
* Update XY_Brightness_to_hsv tests
* Update test_color.py
* Integrate suggestion in #5590 by nordlead2005. This change has been
sitting in limbo for over a month, but it is a good idea. I don't
mean to step on nordlead2005's toes, but we need to make progress.
* Use defined constant for TEMPERATURE_HOLD
* Integrate handling of vacation into hold mode. Canceling vacation
hold requires an update to the external pyecobee library. Creation
of vacation is not supported (it would be straightforward in the code,
but a complex user interface would be required, similar to what is
now done in the ecobee thermostat).
* Add capability to retrieve list of defined climates from ecobee.
* The mode() method used to return the system mode in internal
representation. However, the user sees a different notation in
the ecobee thermostat. Seeing some internal name is particularly
weired with user-defined climates, where these are named "smart1",
"smart2", etc., instead of the name the user has defined. Return
the user-defined name instead. This change might break some user
interfaces but is easily remedied (e.g., use "Away" instead of
"away").
* Simplify is_away_mode_on().
* Correction of erroneously indented else statement.
* Change comment as flake8 gets confused.
- Bugfix: with f63a79ee we removed `script/home-assistant@.service`
systemd unit file, which is used by Vagrant box to start/stop hass
- simplify interaction with Vagrant, provision.sh now is the only
entry point and doesn't need the user to touch/remove files in
order to change provisioner behavior
* Make zwave devices listen on less network changes.
* Convert more platforms
* Remove printouts.
* Fix copy-paste
* Change default dependent list to empty list
* Fix possible race at startup in mysensors callback
* Update devices via persistence before starting gateway to avoid
two threads calling the same callback at the same time.
* Call add_devices max once per callback
There is no reason for the H to be capitalized. Changing it to lowercase increases consistency with other components and allows for use of the min/max sensor, which throws an error if the units of measurement are not the same.
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* changed info to debug
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added the frontier_silicon component
* trying to satisfy pylint
* fsapi version 0.0.6
* remove white space
* generated requirements
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* trying to satisfy pylint
* changed info to debug
* added the frontier_silicon component
* fsapi version 0.0.6
* generated requirements
* pylint
* moved import requests to the method where it is being used
* add a basic unit test
* cleaned up source code
* added frontier_silicon constant
* added the frontier_silicon component
* added basic test
* added fsapi to requirements_all.txt
* added coverage omit, though a basic test was included
* added MEDIA_TYPE_MUSIC for artist and album
* removed duplicate cons
* switched fsapi call to a property, removed unecessary comment
* detailed docstring for fs_device
* added a space for the info_name - info_text separator
* reduced proeprty (fsapi) access for volume down/up
* Fix: replace influxdb query by another query that is more lightweight and won't timeout
* Fix: replace influxdb query by another query that is more lightweight and won't timeout
* Fix for OSRAM lights connected to hue bridge
Do not send command "effect = none" to OSRAM lights
Osram lights connected to a hue bridge do not seem to handle "effect =
none" very well. Most of the times they jump to the selected color and
then change to red within a second.
Osram lights connected to a hue bridge do not handle xy values outside
of their gamut. Since they just stay at their old color value, handling
the UI is very unpredictable. Sending HSV values to the lights fixes this.
* Add tests for new util methods
* Fast & efficient updates for ZAMG weather data
ZAMG updates on the hour, so instead of checking every half-hour we can
check each minute - only after the observations are taken until
receiving them.
* sensor.zamg: test instead of whitelist for station_id
* Autodetect closest ZAMG station if not given
* ZAMG weather component, based on the sensor
* Review improvements
* Update to new ZAMG schema, add logging
Turns out it wasn't a typo, but rather an upstream schema change. Added
better error handling to ease diagnosis in case it happens again.
* No hardcoded name
- Separate attribs from coffeemaker condition
- Set power units for threshold to mW to be consistent with others
- Adjust on-time labels to be more clear
* Create zwave devices on OZW thread and only add them during discovery.
* Read and write devices dict from loop thread.
* More async
* replace callback with coroutine
* import common function instead of callin git
* Bump qnapstats library to 0.2.3
* Expose the new timeout setting
* Show persistent notification if QNAP fails to set up
This sitaution will usually occur if the server configuration is wrong or the
timeout is set too low. In both cases `api.update()` will fail, which is a
problem because we cannot initialize many of the sensors without having this
data.
* Add new system_temp condition to QNAP sensor
Avoid unhandled exception and stack trace when server closes connection by changing from handle ClientDisconnectedError to DisconnectedError. Also added HttpProcessingError, which was missing.
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connection working again
* Async add devices is working via callback now
* Beginning to interface with PLM library for control and state
* Deal with brightness in 255 levels with library
* Change sub names to match API changes
* Remove PLM-level update callback
* Support dimmable based on underlying PLM device attributes
* Expand to non-light platforms
* Stubs for turn on and off
* Current version of Python library
* Amend to use switch device attributes
* Use asyncio endpoints for control
* Add logging line
* Bump module version to 0.7.1
* Auto-load platforms, display device info/attributes
* Unify method name for getting a device attribute
* Require Current version of insteonplm module
* Import the component function in each platform in the balloob-recommend manner
* For consistency, handle switch state as onlevel just like lights
* Use level 0xff for on state, even with binary switches
Observing the behavior of a 2477S switch, it looks like even the non-dimmable
devices use 0x00 and 0xff for off/on respectively. I was using 0x01 for on
previously, but that yields unnecessary state change callbacks when message
traffic ends up flipping the onlevel from 0xff to 0x01 or 0x01 to 0xff.
* Use sensorstate attribute for sensor onoff
* Move new device callback to devices attribute
* Add support for platform override on a device
* Bump version of insteonplm module
* Default overrides is an empty list
* Avoid calling private methods when doing common attributes
* Remove unused CONF_DEBUG for now
* flake8 and pylint code cleanup
* Move get_component to local function where it is needed
* Update to include insteonplm module.
* New files for insteon_plm component
* Legitimate class doctring instead of stub
* Docstring changes.
* Style changes as requested by @SEJeff
* Changes requested by @pvizeli
* Add @callback decorator to callback functions
* Opportunistic platform loading triggered by qualifying device detection
Instead of loading all the constituent platforms that comprise the insteon_plm
component, instead we defer and wait until we receive a callback for a device
that requires the platform.
* Restore states
* feedback
* Remove component move into recorder
* space
* helper
* Address my own comments
* Improve test coverage
* Add test for light restore state
* Set configurable refresh value delay to 5 seconds
* Revert "Remove configurable refresh value delay, and fix it to 5 seconds"
This reverts commit edc2dc35d165e5e13b0f3cf4df40493a7ce764f1.
* Use default value of 5 sec for refresh, and still configurable
* Make default delay 5secs, but needs to be activated
* Added support for alternate SSH ports in AsusWRT (#4832)
* Always set the SSH port in SSH arguments
* Removed whitespace
* Adding port=22 to the mock calls
* Changed config.get(CONF_PORT) to config[CONF_PORT] per feedback from @pvizeli
* Added forecast functionality to the weather platform, updated OWM to get forecast data
* style fixes
* Changed returned forecast data to a more managable dict
* Fixed line length
* forecast will always be collected, data returned from owm is based on metric setting
* use list comprehension to create the forecast data
* Added forecast data to the weather demo
* Create dict directly in list comprehension
* Minor variable change in weather demo platform
* Convert forecast temperatures in weather component
* set forecast attributes as constants
* Style fixes and tests
* Copied forecast_entry instead of mutating data
* Support aliased owfs sensors
Current implementation does not support OneWire OWFS sensors that are aliased by OWFS alias.txt file:
http://owfs.org/index.php?page=aliases
Assumption is that folder name == sensor address
This change reads the supported families from owfs "family" file and adds both aliased and unaliased sensors.
(this approach also skips the "management" folders.. eg simultaenous, bus, alarm, statistics etc. For example when adding "simultaneous" as sensor (it also has "temperature" file) then owfs crashes)
* Update onewire.py
lint suggested style fixes
* Update onewire.py
Empty line removed
* Update onewire.py
comments removed
* Migrate mqtt to async
* address paulus comment / convert it complet async
* adress paulus comment / remove future
* Automation triggers should be async
* Fix MQTT async calls
* Show that event helpers are callbacks
* Fix tests
* Lint
* First round of not using values directly
* Round two
* lint
* Round four
* Conflict
* Round five
* Update zwave.py
* round six
* Docstring
* flakywakie
* Fetch values in constructor
* Blank line removal
* Set attributes in callback
* Docstring
* Round seven
* Ughgit add homeassistant/components/lock/zwave.py!
* Sloppy code
* Add aurora sensor
* allow custom forecast threshold for aurora binary sensor
* move AuroraGateway functionality to Aurora data object to conform with HA standards
* Add fake support for turn on/off for Apple TV
When the device is "turned off", no requests are sent to the device.
When the setting "start_off" is set to true, the device starts in off
state.
* Fix async comments
* Clean up supported features
* Reconnect robustness, expose connection state.
- Expose connection status as rflink.connection_status state.
- Handle alternative timeout scenario.
- Explicitly set a timeout for connections.
- Error when trying to send commands if disconnected.
- Do not block component setup on gateway connection.
* Don't use coroutine where none is needed.
* Test disconnected behaviour.
* Use proper conventions for task creation.
* Possibly fix test race condition?
* Update hass import style
* Add support for the Open Energy Monitor Thermostat
* Fix linting errors
* Define an update method and local state
* fix linter
* Small tweaks.
Update oemthermostat version, default name and docstrings
* Fail to setup oem platform if connection fails.
* update requirements
* More tweaks to auth and exceptions
* Remove target temp
* Bump pwaqi to 1.4 to fix a typo in the underlying library.
* Update WAQI sensor to use pwaqi 2.0 which relies on AQICN public API.
This is a breaking change as the component now requires 'token' parameter.
* Fix lint
* Core cleanup: two stage shutdown
* fix spell
* fix
* add async logger to close
* change aiohttp to use CLOSE
* address paulus comments
* Fix tests
* Add unittest
* Stop using entity_picture that is known to be bad.
* Only abandon image on 400 or 404 response
* Return is_permanent_failure as a third part of response
* Add debug printout
* Fix lint
* Fix lint
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* Add support for multiple devices to Tado device tracker
* Hound did not agree with my usage of spaces
* Two blank lines were expected
* Keep CONF_HOME_ID in the Tado file
* Make home_id optional
* Work with different API URLs depending on home_id being present
* Remove CONF_HOME_ID from HA's const.py file
* Missed removing CONF_HOME_ID from the import
* Add new sensor/history_stats component
* Add real unit tests
* Code style changes requested for pull request
* Remove time aliases & allow datetime values
* Reformat unit tests
* Remove all async behavior in history_stats
* Change duration format
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* new component telegram_webhooks
* keyboard support in telegram notify
* telegram_webhooks has no tests
* requirement like notify/telegram
* ops, requirements_all.txt needed for travis
* ops, requirements_all.txt is generated by script/gen_requirements_all.py
* check telegram trusted networks in web handler
* raise an event now
* use of hass.config.api.base_url
* more readable
* small cleanups
* Small style change for HA guideline
* fix lint
* revert return to origin
* Support away_mode as permanent hold and hold_mode as temporary hold.
* Add comments to explain code better. Remove indefinite hold preference
to be consistent with 'away_mode'.
* Fix arwn platform discover_sensors
The discover_sensors function can return either singletons or a list
of sensors. However the consumer was always expecting a list. This
fixes it to work in both cases.
* Add custom icons to arwn sensors.
This adds some custom icons for different kinds of weather sensors
that the arwn platform returns. Makes it a little easier to see what's
going on.
* Bumped up version to use 0.1.7 of Russound integration module.
Fixed bug arising from not supporting TURN_ON state (fixes issue https://github.com/home-assistant/home-assistant/issues/5012)
Implemented state support in 0.1.7 such that component state is returned from the actual AMP. (Still uses polling model though).
Tested it with home-assitant users @laf (original developer of the module) and @hofsta. Works fine with their Russounds.
* Made styling / compliance changes and updated correct version of russound module on requirements_all.txt.
* Changed handling of properties to be compliant with https://github.com/home-assistant/home-assistant/issues/4210
(Specifcailly added member variables for state, volume and source to cache these values, and introduced Update() method to set their values).
Now returns None if the selected source index that is returned from russound is greater than the length of the specified source list in the yaml config.
Removed unnecesary comment.
* Removed blank line after docstring.
* Removed updated() in class init and added True paramter to add_devices in setup_platform.
* Dropped the no longer needed self.update()
* Move core servcie from core to components
* add new handler for signals/exception
* Static persistent id
* Move unittest
* fix coro/callback
* Add more unittest for new services
* Address comments
* Update __init__.py
* improve warning message when template is none
* improve error message when template is none
* improve error message when template is none
* improve error message when template is none
* Mailgun notify service
* Update dependency to version 1.3
- The provided credentials (including the domain) are now checked during
startup, as requested by @balloob
- The domain name is now optional
- There's a new config item "sandbox" which indicates whether to use the
sandboxed domain in case the domain is not set
* Fix a few lint issues
* Disable lint check no-value-for-parameter
The nest-cam changes have now been merged into the upstream library, so
there is no need to track a specific branch.
Updating to 3.1.0 also fixes a structure parsing bug I was experiencing.
* Add mysensors device_tracker platform
* Add discovery of device_tracker platforms
* Enable discovery of device_tracker platforms that are not
DeviceScanner.
* Update signature of setup_scanner function in all affected platforms.
* Add test.
* Use discovery for mysensors device_tracker platform.
* Remove gps accuracy
* Small change to core like schema
* fix depency
* Add support for writing ID3 tags to the file for improved display in media players
* Lint and async fixes
* Use mutagen instead of taglib
* Fix tests
* Add fallback for album
* Requested changes
* move import
* Fix album name
* Change default options handling
* Move to member function / minor fix
* fix style
* fix lint
* change mutagen handling
* fix lint / add name to bytesio
* Update __init__.py
* Fix test, some cleanups
* Add mutagen exeption handling, fix tests
* fix mutagen taging
* Revert "Fix hue lightgroups not syncing state (#5702)"
* Use light_id in unique_id for Hue groups
* Make sure HueLight unique_id is unique
* Update hue.py
* Update hue.py
* Update hue.py
* Check config before restarting.
* Make check_config on restart async
* don't check if notification service exists
* Use .communicate()
* Reduce the number of notifications. Add tests.
Previous code used the state topic which is obviously wrong:
- The state topic is already used to select optimistic mode.
- A light with only the state topic but no command topic would still announce the capability.
* Added error checking to the MIMEImage encoding for smtp.py
Added fallback to file attachment rather than inline image for images
without a known MIME
* PEP8 reqs to fix previous commit
* Fix validation of serial port on windows
* Use pyserial to check serial ports.
* Check that persistence file ends with either `.json` or `.pickle`.
* Change fix to not rely on pyserial
* Use generator expr instead of list comprehension
* Change CONF_DEFAULT_COLOR CV type
Changed vol.Optional(CONF_DEFAULT_COLOR, default=DEFAULT_COLOR) from cv.string to cv.ensure_list
This allows the optional parameter default_color to be picked up correctly and to function
the option needs to be specifed as follows:
default_color: [0,255,0]
Solution provided by @scossa2020 in issue #5338https://github.com/home-assistant/home-assistant/issues/5338
* Update hyperion.py
* Support for the Orage Livebox Play TV appliance
* Add liveboxplaytv to coveragerc
* Minor refactoring
* Update requirements
* Adjust comments
* Fix alignment
* Fix some coding-style issues highlighted by Travis CI
* The livebox play TV does not support playing media
* Lint: shorten line
* Remove unused callback function
* Remove redundant backslash
* Implement changes requested by balloob
* Don't error out if channel name or media url could not be retrieved
* Support current program (media title property)
* Remove unnecessary check
* Clean up: Remove another unnecessary check, _CONFIGURING variable and _playing attribute
* Update liveboxplaytv dependency to version 1.4.4
* Fix liveboxplaytv requirement
* Improve media state (support for playing and pause state)
* Update liveboxplaytv.py
* Index events time_fired to improve logbook perf.
* Updated implementation to track schema versions
* Added tests for schema migration support logic
* Rename check_schema to migrate_schema
* Remove redundant input validation which is already accomplished through
defined schemata.
* Rely on defined state attributes for hold mode.
* Remove misleading comment. This comment seems to assume that sleep
mode is a hold; it is a schedule instead. The code snippets in the
comment could never work.
* Remove use of constants for hold mode. Will be made irrelevant
by a planned change by nordlead2005.
* Support for Nuki.io smart locks
* Update requirements and add lock.nuki to .coveragerc
* lint: Re-organize imports
* Schedule a state update instead of calling directly update_ha_state
* Remove update requests altogether
* Make sure there is no IO inside properties
* Fix: nuki lock are all initialized as "lock.unnamed_device"
* Update pynuki to 1.2 to avoid an extra REST API call for each lock init
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* Refactors script/setup_docker_prereqs
Refactors script/setup_docker_prereqs to allow toggling of packages
to being installed
* Adds support for openalpr to Docker
* Updates Dockerfile
Comments ENV directives in order to preserve cache.
* Fixes incorrect position of echo
* Fixes telldus installer by updating apt before pkg install
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* Voice command API.AI. First import
* Fixes suggested by hound
* Fixing comments
* Fix pylint and pydocstyle errors
* Change how speech is defined
Also clean some unused constants, remove card type (not used), define
a message when action is not defined and improve the message when
action is unknown.
* Change how speech is defined
Clean some constants.
Improve error messages.
Delete card type, not used.
* Tests for new Api.ai component
* Use async_add_job to python compatibility. New test to measure response time
* Add async_action option to choose between waiting or not for the action to execute
* Travis-ci needs more time
* Removed timeout tests
* Removed timeout tests
* Added apiai to .coveragerc as specified by PR doc
* initial yeelight based on python-yeelight
* adapt yeelight's discovery code & suppress exceptions on set_default
* Support flash & code cleanups
Adds simple pulse for flashing, needs to be refined.
This commit also includes changing transition from seconds to milliseconds,
and cleans up the code quite a bit.
* cleanup code, adjust default transition to 350
* bump required version to 0.0.13
* Cleaning up and marking todos, ready to be reviewed
* Renamed back to yeelight.
* Removed effect support for now until we have some sane effects available.
* Add "breath" notification for flash, currently hidden behind a False check due to unknown issue not accepting it.
* TODO/open points are marked as such.
* Fix a typo in rgb calculation
* yeelight_<bulbtype>_<mac> for autodetected bulbs
hostname from mdns seems to vary
* Lint fixes, add music mode, fix flash
* Flash transforms now to red and back
* Fix lint warnings
* Add initial music mode.
* remove unused mode logging, move set_mode to turn_on
* Add save_on_change configuration variable
* yeelight: check if music mode is on before enabling it.
* Fix linting, bump required python-yeelight version
* More linting fixes, use import when needed instead of saving the module handle
* Use OR instead of + for features assignment
* Fix color temperature support, convert non-rgb values to rgb values in rgb()
* Fix typo on duration, thanks @qzapwy for noticing
* yeelight: fix issues from review, behave when not available
* Implement available()
* Fix transition to take seconds instead of milliseconds
* Fix default configuration for detected bulbs
* Cache values fetched in update()
* Add return values for methods
* yeelight: kwarg-given transition overrides config, slight cleanups
* change settings back to optional, request update when calling add_devices
* As future version of python-yeelight will wrap exceptions, we can handle broken connections more nicely.
* bump yeelight library version
* Remove unused import
* set the default only when settings are changed and not, e.g., when turned on by automation
* update comment & fix linting
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* Update __init__.py
* Moved logic for advertised ip and port into config class.
* Commenting change for clarity.
* Spacing changes for PEP8
* Spacing Changes for PEP8
* Style Changes
* Bugfix sonos / refactor of sonos function for TTS
* fix unittest
* update service yaml
* restore group of a coordinator
* use group function to evaluate
* fix state flooting
* fix comments
* Implement echo config option for pilight
Pilight switches can get a receive code configured. If so they act on
received codes. In the current implementation "act on" means not only
to set the internal state, but also to send the code again. If the
receiver is directly parred with the switch, to act even if HA is not
running, this causes it to receive the signal twice because the HA
sends it again.
In my case this causes a dimmer to start dimming until I hit the switch
again.
This implements a "echo" argument for the receive codes that let the
user choose if a received signal should result in any sending or not.
If not, only the status of pilight will be updated.
The echo option defaults to True, as this was the default since now.
Simply set it to halse to disable this behaviour.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add documentation to set_state in switch/pilight.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Fix async_volume_up / async_volume_down (#5249)
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* adding a default icon "blind" to a PowerView blinds scene. (#5210)
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Use SHA hash to make token harder to guess (#5258)
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* Bugfix async device_tracker see callback (#5259)
* Add support for NAD receivers (#5191)
* Add support for NAD receivers
* remove self.update() in various methods
* remove setting attributes in various methods
* Change import to hass style
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Revert "Bugfix camera streams (#5306)"
This reverts commit 4b43537801.
Revert "Version bump for kodi dependency (#5307)"
This reverts commit 6abad6b76e.
Revert "Add HMWIOSwitch to sensor, binary (#5304)"
This reverts commit 2c3f55acc4.
Revert "Remove GTFS default name & string change"
This reverts commit 6000c59bb5.
Revert "Update pyhomematic 1.19 & small cleanups (#5299)"
This reverts commit a30711f1a0.
Revert "[sensor] Add Dublin bus RTPI sensor (#5257)"
This reverts commit 1219ca3c3b.
Revert "Bugfix group reload (#5292)"
This reverts commit baa8e53e66.
Revert "Support for TrackR device trackers (#5010)"
This reverts commit f7a1d63d52.
Revert "Bump pywemo version."
This reverts commit dc937cc8cf.
Revert "Upgrade to voluptuous to 0.9.3 (#5288)"
This reverts commit d12decc471.
Revert "Upgrade distro to 1.0.2 (#5291)"
This reverts commit 64800fd48c.
Revert "Don't build Adafruit_BBIO - doesn't work on all platforms. (#5281)"
This reverts commit 9a3c0c8cd3.
Revert "Convert flic to synchronous platform. (#5276)"
This reverts commit eb9b95c292.
Revert "Upgrade to aiohttp 1.2 (#4964)"
This reverts commit e68e29e03e.
Revert "Fix TCP sensor to correctly use value_template (#5211)"
This reverts commit 1cf9ae5a01.
Revert "Cleanup language support on TTS (#5255)"
This reverts commit 3f3a3bcc8a.
Revert "Add last triggered to script (#5261)"
This reverts commit 467cb18625.
Revert "Bump flux_led version and make use of PyPi package (#5267)"
This reverts commit 34a9fb01ac.
Revert "Add support for NAD receivers (#5191)"
This reverts commit 3b59e169f1.
Revert "Bugfix async device_tracker see callback (#5259)"
This reverts commit 71fddd26eb.
Revert "Use SHA hash to make token harder to guess (#5258)"
This reverts commit 922308bc1f.
* Revert "Revert "Bugfix camera streams (#5306)""
This reverts commit 2ee8c44021.
* Update darksky.py
* Remove SPEED_MED from fan
* Add an Amazon Polly TTS platform
* Update boto library version for notify.aws_* platforms to match the tts.amazon_polly req
* Improve log line and add docstring to function
* Simplify config logic
* Remove duplicate logic
* Don't know how this got in here...
* initial options work
* Remove stale config option and only allow supported languages
* Make requested changes
* Polly is only supported in some regions
* Allow filename to contain underscores (for amazon_polly platform name), remove unnecessary default_lang, other small things
* Add options dict to service description
* Update keyboard_remote.py
I added a couple of events: keyboard_remote_connected and keyboard_remote_disconnected, useful to trigger some action (for example: play a sound)
I changed the way the component refers to the keyboard: not by "descriptor", but by name.
The fact is that the udev system doesn't always give a name link in /dev/input/by-id folder and the actual /dev/input/eventX file changes automatically.
For example, if I had my keyboard on /dev/input/event13 and then it disconnected, if something else connects to the system it will get the first input file available, that is /dev/input/event13. If the keyboard then reconnects, it will get /dev/input/event14, thus breaking the configuration.
Now it searches every time for the right input file.
The problem might be that, in case of ha upgrade, the pre-existing configuration won't work. I thing there are some guidelines here, but I am not sure.
I think it's inevitable: the initial idea to use a /dev/input/by-id/ symbolic link was good, but unfortunately it doesn't seem to work with bluetooth devices.
I haven't updated the documentation yet: I'm waiting for some ok about the change in configuration key names.
* Update keyboard_remote.py
That should do the trick.
You are right: device names can be duplicated, thus they're not reliable in case of multiple devices. Unfortunately, the only other information available is the physical address, even more complicated.
But in case you have just one keyboard remote of same model, the name works just fine. I'll put it in the documentation which, once the code is approved, I will promptly update.
* Update keyboard_remote.py
* Update keyboard_remote.py
* Update keyboard_remote.py
* Unwrap logger error
* ASUSWRT: Add IPv6 support when parsing neighbors
The regex for IPv6 should cover most cases, but it doesn't validate
whether IP is correct. It also might fail for some edge cases.
Also, ignore 'duid xx:xx:xx:xx:xx:xx:xx:xx:xx:xx' line in leases.
Closes#2814 - ASUSWRT doesn't support ipv6
* Update asuswrt.py
* Added new platform sky_hub
* added env to virtual environment gitingore
* Removed unuseful imports
* BT home hub 5 renamed to sky hub in the comments
* Added sky_hub to .coveragerc
* Added example configuration in sky_hub docstring
* sky_hub made compliant with test style standards
* homehub functions renamed to skyhub
* Update .gitignore
* Update .coveragerc
* Move isdevice validator under helpers.config_validation.
* Check that all persistence files are set and are unique if any is set
by user. This is necessary to avoid file name clashes.
* Check that a set persistence file has an existing and writable
directory.
* Check that a device is either a valid device file, "mqtt", or a valid
domain name or ip address.
* [image_processing/microsoft_face_verify] face recognition for automation
* Add platform for microsoft face identify
* add unittest for demo
* Add unittest for platform
* add a small sleep before reading the sensor
The read of the sensor might be incorrect if it's read too soon after the setup_input call. It might be isolated to my case where I rely on the the PI internal PULL, but once I added this sleep I never get false initial read. If you think this change is appropriate please merge it.
* Update rpi_gpio.py
* Update rpi_gpio.py
* Update rpi_gpio.py
* Add missing dependency in emulated_hue component.
On first startup after upgrade to 0.36, the emulated_hue componented failed to
start because the http component had installed the modules it depends on, in
this particular case 'aiohttp_cors' was missing.
* Include dependencies for the emulated_hue web server
Emulated_hue uses it's own 'web-server' component to handle hue related
discovery and config, so we need to make sure the required http modules are
made available before we are initialized.
We don't have to depend on the home-assistant http/api component because we do
not need to have the frontend to be initialized to handle emulated_hue, so we
can just import in the same set of requirements as the http component.
* Fix linting error
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* check cec message length when asking physical address (#38) (#38)
* cec turn on/turn off commands instead of power
* cec turn on/turn off commands instead of power
* Using new MaxShutterContact class
* Skip unnecessary function calls
* Added casting for VALUE
* Some renaming to clarify what's happening
* Bumped dependency version
* Bumped version in requirements
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* Fixed crash when lights objects was inited
* Fixed initial value for tellstick lights
* Fixed problem with lights not working with the turn_on action.
* Remove SPEED_MED from fan
* Correctly use the oscillation on/off payloads for MQTT fan
* Add set_direction service documentation
* Correct function name for Wink fans
* Check for existence of the correct topic
* Enable set fan speed in emulated_hue
* features -> functions
* Final emulated_hue fan fixes
* Fix linting issues
* Revert to supported features instead of supported functions
* Fix logic
* Add a test for emulated_hue fan support
* Allow automatic removal of all Hue entities from emulated_hue
* Allow disabling of Hue groups
* Only add device state attributes if they need to be there
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* pylint disable import error
* read_input() changed to return boolean value, according changes in binary sensor
* example configuration in docstring changed to mention direct web link, pylint update
* read_input() updated according review
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* Updated ISY component to not overwrite state_attributes.
The ISY component included an ISYDevice base class that is used by all
of the isy994 platforms. This still overwrote the state_attributes
property instead of the more appropriate device_state_attributes
property. This was also repeated in the isy994 light platform. Both of
these were addressed. This also fixes issue #5428.
* Removed custom state attributes from ISY lights.
The brightness attribute need not be manually reported by the isy994
light platform.
* Removed ISY Node cleanup.
The ISY entities don’t really need to unsubscribe themselves while hass
is shutting down. Because these updates are not sent in a thread, there
is no negative impact from shutting down without unsubscribing. This
greatly speeds up hass shutdown.
* Removed unused attribute from isy994 light platform.
* Cleaned up ISY994 light entity class.
1) Removed the state property. This property is set in the Entity base
class and shouldn’t be overridden here.
2) Set the brightness property. This is the proper way of setting the
brightness for the Light base class.
3) Removed properties that are now unused because of these changes.
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Initial commit of anthemav platform. It loads but has no purpose.
* Now presents a card in the UI but the values aren't real
* Mute and volume polling/setting work now
* Source lists and selection works now.
* Reduce debug logging verbosity
* Support power on/off and skip polling for details if power is off
* Add some static tables to decode numerics from telnet commands
* Add stub for unsupported media_play
* New style anthemav uses native asyncio structure
* Add device callback for asyncio
* This is ugly but it works
* Simplify async setup and abstract class data retrieval
* Implement commands (power on and power off for now)
* Add support for scan_interval and set default to 120 seconds
* Pass-through to package handlers for volume and input selection
* Slight restructuring to satisfy anthemav 0.9
* Load anthemav package from pypi now that it's registered
* Proper app_name from a/v info
* Mispelled word
* media_player/anthemav initial commit of platform requirements
* Philio 3-in-1 Gen 4 zwave sensor needs the no-off-event workaround. (#5120)
* Add print_config_parameter service to Z-Wave (#5121)
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* Conform to Python/project style requirements
* Making pylint happy
* Bring pip requirements in agreement with the code
* Bungled previous update
* Remove unnecessady SCAN_INTERVAL logic
I was unawre that this is performed as part of the normal platform behavior and
it's unnecessary for a platform to independently implement this logic.
* Refactor code based on @armills PR requests
* Re-add media_play stub to avoid traceback
* Align with platform reqirements
* Remove references to SCAN_INTERVAL and clean up _lookup logic
* Add DEFAULT_PORT assignment
* Code style changes and removal of vestigial structures
* CONF_NAME handling changes to allow local override to default from device
* Address PR feedback from @balloob
* Remove media_play function override
It's no longer necesary for the platform to implement a stub media_play
function override now that the Add SUPPORT_PLAY flag #5181 issue has been
resolved and merged into the dev branch.
* Rename callback function to async_ for clarity
* Use async routines for platform methods
* Convert update callback to coroutine for conformity
Underlying anthemav library now properly supports coroutine callbacks instead
of normal functions. Converted the platform callback to a coroutine for
conformance with async operation for the device.
Special thanks to @pvizeli and @armills for their invaluable remedial Python
instruction!
* Further callback refinements
Altered the nature of callback handling based on suggestions from @pvizeli
* True not needed for local push update_ha_state
* Small style fix
After _control_heating() is executed, current_operation() is correctly called but _is_device_active() still reports the old state if the heater switch, at least in my case. The resulting climate state is incorrect until the next refresh, which apparently occurs only when _sensor_changed() gets called (it can be minutes after).
I think the state of the heater switch should be forced to update at the end of _control_heating(), but I don't know how to do that...
A simple sleep() fixes it, but obviously is just a temporary workaround, I'm not really expecting this PR to be actually committed, unless there's no other solution.
* Added tado device tracker
* Added tado device tracker to .converagerc
* Updated docs
* Code formatting and removed unused import
* Code formatting and removed unused import
* Respected the lint line length
* Respect pydocstyle rules
* Respect the lint line limit length
* Fixed reviewer feedback
* Changed the tracker to support async
* Respect the New line end of file rule
* Update .coveragerc
* Improved x10 state monitoring
* Improved x10 state monitoring
* Use update mthod to fetch state change
* Use update mthod to fetch state change
* Use update function to fetch status
* remove temp file
* Add doc string to update method
* denonavr: Expose input as title when in non playing modes
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denon: Pop from the intended end of the list
Pop from front of list, so we start with NSE0, then NSE1X and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Don't provide broken media_url's
Only return a media_url if we're in a state that might provide one.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Only expose player support when in a player mode
This changes so the denonavr only exposes the media player support, when
in a mode that supports media playing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add listing and selection of available MPD playlists through input source UI.
* MPD support updating playlist list on the fly as well as at turn-on.
* Added no_throttle to force playlist update on mpd power cycle.
* Added kwargs signature to get Throttle working right.
* Initial commit of discord notification component
* Fixed error where script added extra entries to .coveragerc
* Cleaned up code
* Compliance to PEP8
* removed dependencies
* readded dependencies
* changed name of client id to token for configuration
* Changes for Hound
* Incorporated Review Feedback
* Review feedback
* Updated requirements file
* Check compliance
* Introduced Amcrest camera sensors
* Makes script/gen_requirements_all.py happy
* Bump Amcrest version across all components
* - Adjusted scan_interval to 10 seconds
- Filtering HTTPError and ConnectTimeout exceptions
- Removed @Throttle decorator
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
* Made target temperature sensitive to auto mode
* Used current_operation instead of operation_mode
* When not in auto_mode, the temperature is sent to set_temperature
* Low and high targets are switched in the call to set_temperature.
* Missed on current_operation. Use STATE_AUTO.
* Remove incorrectly checked in directory.
* Updated set_temperature based on Martin's feedback.
* Use ATTR_TEMPERATURE from const.py
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
Removing redundant throttle decorator on update method. This ensures the existing 'cache-value' config option is respected. Also, UPDATE_INTERVAL is renamed to DEFAULT_UPDATE_INTERVAL for clarity.
* Add support for direct MJPEG streams from Amcrest cameras
The previous implementation relied on using snapshots from the camera. However,
some Amcrest models cannot keep up with the large number of requests and
instead timeout, resulting in no video stream. These cameras do provide MJPEG
streams though, so this commit adds the option to use these instead of creating
one from snapshots.
Unfortunately, some cameras on newer firmwares do not support MJPEG streams at
high resolution - only at low resolution.
By providing users with both a `resolution` and `stream_source` option, we can
allow them to choose whichever combination works for their particular model
and firmware version.
* Close the stream instead of releasing it
* Close stream without creating a task
* Handle client aborts
* fix lint
* Added Yandex SpeechKit TTS
* Added test stub
* Added two test and added property for yandex tts
* Copy all test from voice rss
* Added test vith different speaker and code style changes
* Added new line to end of file
* Url format replaced with url_params
* Fix typo
* Auto-config for `sensor.bom`
Deprecate (but still support) the old two-part station ID, and move to a
single `station` identifier. Any combination of these, including none,
is valid; most results in downloading and caching the station map to
work out any missing info.
* Add `weather.bom` platform
Very similar to `sensor.bom`, but supporting the lovely new `weather`
component interface. Easier to configure, and does not support the
deprecated config options.
* Review improvements to BOM weather
Largely around better input validation.
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
Added support for additional optional configuration
arguments:
to send to vlc.
It is useful for special configurations of VLC.
For example, I have two sound cards on my server, so I defined two vlc media players:
media_player:
- platform: vlc
name: speaker_1
arguments: '--alsa-audio-device=hw:1,0'
- platform: vlc
name: speaker_2
arguments: '--alsa-audio-device=hw:0,0'
This way, by specifying the corresponding entity_id, I can send the output to the desired speaker.
It is also useful for TTS.
* Revert #4791 and fixes#4696
* Update influxDB based on PR comments
* Add migration script
* Update influxdb_migrator based on PR comments
* Add override_measurement option to influxdb_migrator
* Rename value field to state when data is string type
* Fix influxdb cloning query
* Remove build dirs from docker image to keep the layers small
* Create setup_docker_prereqs script to prepare docker env
* Add documentation for required packages, drop colorlog and cython in first step of Dockerfile since it will be installed later on anyway. Drop libglib2.0-dev and libbluetooth-dev
* Also remove early install of colorlog and cython in Dockerfile.dev
* Re-add libglib2.0-dev and libbluetooth-dev for Bluetooth LE
* Add support for Zengge Bluetooth bulbs
Adds support for the Zengge Bluetooth RGBW bulbs. These are sold under a
number of brands, including Flux. The bulbs do not support full RGBW
control - they turn off the RGB LEDs when white is enabled, and vice versa.
* Update zengge.py
* Initial commit for Wink fan support
* Added fan to discovery list
* Raise NotImplementedError and fixed is_on
* Added speed property
* Update __init__.py
* eq3btsmart: support modes and clean up the code to use climatedevice's features
* eq3btsmart: re-add device state attributes
adds reporting for is_locked, valve, window_open and low_battery,
exposing everything the device reports currently.
* eq3btsmart: bump version req
* eq3btsmart: fix a typo in mode name, report unknown when not initialized
* eq3btsmart: depend on newly forked python-eq3bt lib, pythonify states
* [Device Tracker] Xiaomi Mi Router integration as device tracker
This device tracker allow to track device connected to Xiaomi Router.
Parameter: host, username (default admin) and password.
* [Device Tracker] Addition of Xiaomi device tracker file in coverage
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add Lannouncer notify component
* Send message by opening a raw TCP socket instead of using requests. Cleanup of method validation.
* Use 'return' instead of 'return None'
* Fix#5188 by Closing the stream instead of Releasing it
Closing just terminates the connection, release attempts to download all the contents before closing. Since the MJPEG stream is infinite, it loads and loads content until the python script runs out of memory.
Source: 50b1d30f41/aiohttp/client_reqrep.py (L668-L672)
* Update mjpeg.py
* platform set-up begin components
* lights seem to be getting set up properly, not sure why they aren't being added...
* typo
* Dependencies line
* toggle working
* toggle working
* added the switch to insteon_local
First commit hope to test tonight or in the morning
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* move dependency declaration before import?
* Move dependencies in Switch
* Update insteon_local.py
* wait for response
* switched the while to an if
switched the while 'cmd2' not in resp: to an if 'cmd2' not in resp: this seems to have the updater working
* Switched the while sleep loop to an if
switched the wile cmd2 not ins resp to be if cmd2 not in resp seems to be working.
* Update insteon_local.py
* import statement
Updated the import statement to import the instance of the insteon_local component not the hub Instance.
* updated import and the device assignment
update the import to import the instance of the insteon_local component not the hub.
* more changes to support the import change
* more changes to support the import change
* change to hass.data and add loop logic
* &&
* Update insteon_local.py
* Update insteon_local.py
* logic fixes and throttle
* reduce polling time
* brightness support
* import util
* hound fixes
* requirements file
* more hound fixes
* newline
* newline weirdness
* lint fixes
* more lint fixes
* switch state
* Update insteon_local.py
* log cmd2 for debugging
* assume success
* remove check for none
* fix comments
* fix comments again
* fix comments, add fixed version of lib, add support for timeout, add support for port, handle invalid login and connection problems
* fix logging exception
* fix hounceci-bot errors
* fix hounceci-bot errors
* requirements fix
* unique-id changes
* make dimmer off use saved ramp rate
* configurator working for lights
* configurator working for switches?
* configurator working for switches?
* include model names and fix lint errors
* lint fix
* fix exception order
* lint fixes
* fix lint errors
* update to use insteon local 0.38
* fix device id
* move status check to library
* move status check to library
* add SKU to setup
* lint fixes
* requirements
* linting
* Refactor of Squeezebox connection code
* Refactor of Squeezebox connection code
* Typos
* Make Python 3.4 friendly
* Addressing comments
* Improving docstring
* Using discovered port
* Style better
* Accept new disco object
* Revert "Accept new disco object"
* Make it obvious that port isn't discovered yet
* Flake8. ;)
* Add teardown method to pilight tests
This is necessary to stop the HomeAssistant instance that was started
in the setUp method. Without this there happen random test failures.
This is necessary to stabilize the tests for PR #5045.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Update test_pilight.py
* Re-enabled Weather Sensors for the ISY component.
As the ISY component had been updated to support newer components and
have better UOM support, the support for ISY’s weather module was
dropped. This adds that support back into Home Assistant.
* Cleanup of the ISY Weather support.
Cleaned up the for loops used to generate nodes representing weather
data from the ISY. Moved the weather_node named tuple to the top of the
file so that it can be more easily identified.
* Update isy994.py
* Update scan_interval and interval_seconds max to 1 day vs. 60 seconds
* Format fixes
* Add docstring on unittest.
* Added and implemented new async_track_time_interval helper.
* Format fixes, removed unused import.
* Undid whoops on unsub_polling.
* Updated unit tests for scan_interval.
* Added unit test for track_time_interval.
* Allow other forms of time interval input for scan_interval and interval_seconds
* Update keyboard_remote.py
I changed os.path.isFile() to os.path.exists: as far as I know isFile doesn't work with device files. At least on my Ubuntu it wasn't working.
Then I added some error control in case the keyboard disconnects: with bluetooth keyboards this happen often due to battery saving. Now it reconnects automatically when the keyboard wakes up.
We could fire an event to hass when the keyboard connects-disconnects, maybe I'll do this later.
We should also manage errors due to permissions problems on the device file, or at least give some info in the docs about how to allow HA to grab control over an system input file.
I'm sorry if my coding isn't up to some standard practice I'm not aware of: I'm new to HA and to python itself, I'm just trying to be of help.
Gianluca
* Update keyboard_remote.py
I changed some other few things.
Not the component gets loaded even if the keyboard is disconnected. When it connects, it starts to fire events when keys are pressed.
I also added a sleep(0.1) that reduces a lot the load on the CPU, but without many consequences on key pressed detection.
* Add a volume to store the tox cache on the host. This gives quite some speed boost when running lint_docker and test_docker.
* Only map .tox directory for cache.
* Spread the traffic to yr.no servers and remove yr.no from the default config
* use unique address for yr.no
* update yr tests
* Wait 10 min extra before requesting new data
* Update config.py
* Update yr.py
* Add support for Tikteck Bluetooth bulbs
Adds support for the Tikteck RGBW BLE bulbs. These don't provide "true" RGBW
support - at a certain point in RGB space, the white LEDs turn on. Each bulb
has a specific key that needs to be extracted from the Android app.
* Update tikteck.py
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Better async/threading behavior for tellstick.
* Fix lint/style checks.
* Use hass.async_add_job
* Add ability to set rpi_rf `tx_repeats` attribute
Uses the current `rpi_rf` default of 10
Closeshome-assistant/home-assistant#5069
* Use `signal_repetitions` instead of `repeats` for consistency
Adding the device_id key to the bevice tracker component allows selecting the bluetooth device to use in case the default device does not have BLE Capabilities
Rather than rely on base_url being unconfigured and therefore be
set as the host ip in the api component, get the local ip directly.
Use server port from the http component instead of the api component
where it will be None if base_url is set.
Change the exception catch meant to check for ipv4 vs ipv6 to wrap the
address encoding only instead of the zeroconf service info declaration.
* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Allow bower install of frontend components as root. Needed for frontend development in docker since everything runs as root in the docker image.
* Improve development workflow in docker
* Use LANG=C.UTF-8 in tox. Fixes installation of libraries with UTF-8 in it's readme.
* Install mysqlclient psycopg2 uvloop after requirements_all.txt again, but with a --no-cache-dir this time. Allows bootstrap_frontend to be executed in a different path like the other scripts.
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* ecobee_set_fan_min_on_time: fix issue using 'entity_id' field and add service field help text
* climate.ecobee: add 'resume_program' service
* Add default value for resume_all and correct entity_id field name reference
* Allow to specify TTS language in the service call.
* Allow to specify TTS language in the service call.
* Respect 79 char limit
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Change language to be optional parameter of *get_tts_audio
* Change language to be optional parameter of *get_tts_audio
* Respect 79 char limit
* Don't pass "None
* Use default of "None" for TTS language
* Use default of "None" for TTS language
* Don't pass "None"
* Change TTS cache key to be hash_lang_engine
* Change language from demo to en
* Fix wrong replace
* Add sensor for International Space Station
* Change two sensors to one with attributes.
* Fix due to comments in HA PR. Thanks !
* Update Requirement
* emulated_hue: fix alexa "device not responding"
we need to set the brightness to 100 for devices that only turn on
* emulated_hue: dont override brightness for scenes/scripts
* emulated_hue: python and semi-colons
* emulated_hue: fix output brightness level
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Fix Sonos album art for non-radio streams
* Revert "Fix Sonos album art for non-radio streams"
This reverts commit d71502d18f.
* Fix Sonos album art for non-radio streams
* Move art existance check into _format_media_image_url
* Add support for the Sonarr URL Base setting
For those of us who have sonarr hidden behind reverse proxy under a path, we need to be able to pass the path
Adds urlbase: XXX to the sonarr yaml... Match it to what you have set in Sonarr (Settings>General>URL Base)
* Fix line lengths
* Fix trailing white space caused by last change
* Removing use of len()
* Updates TP-Link switches dependent module
Refactors code to use the new module API
* Set TP-Link Switch name from the device settings
If no name has been set in the configuration file the name set on the device will be used
* Removes default name for TP-Link switch
Fallback to device alias now works properly
* Removes logging
* Updates comment to denote support for HS200 switch
Updated the schema check to accept any string
Search custom sources in app title and app id
The makes the short list redundant and thus removed
Tested by adding livetv, netflix, youtube, makovod and others
This is also compatible with the list that was supported till now
so current users won't see any difference.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Remove try/except to connect to the TV
* Update panasonic_viera.py
* Update panasonic_viera.py
* Add basic property details for Nest hvac_state
* Add the hvac_state sensor
* Update requirements and remove trailing whitespace
Clean up the multiline docstring
Adding a space between summary and description
* Removing the hvac_state as a property on the nest climate
* Update nest.py
6-12-09 18:12:30 homeassistant.core: Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/usr/lib/python3.4/asyncio/tasks.py", line 237, in _step
result = next(coro)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity_component.py", line 386, in _update_entity_states
yield from update_coro
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity.py", line 240, in async_update_ha_state
self._attr_setter('entity_picture', str, ATTR_ENTITY_PICTURE, attr)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/helpers/entity.py", line 307, in _attr_setter
value = getattr(self, name)
File "/srv/hass/hass_venv/lib/python3.4/site-packages/homeassistant/components/sensor/wunderground.py", line 176, in entity_picture
url = self.rest.data['icon_url']
TypeError: 'NoneType' object is not subscriptable
* Added Volume Set option and autodiscovery functions to Denon AVR receivers
* Corrected issues in SSDP discovery and in case no host could be discovered
* Corrected discovery handling / added denonavr to discovery platform
* No needless discoveries anymore / add_devices() with list instead of loop
* TTS Component / Google speech platform
* Change file backend handling / cache
* Use mimetype / rename Provider function / allow cache on service call
* Add a memcache for faster response
* Add demo platform
* First version of unittest
* Address comments
* improve error handling / address comments
* Add google unittest & check http response code
* Change url param handling
* add test for other language
* Change hash to sha256 for same hash on every os/hardware
* add unittest for receive demo data
* add test for error cases
* Test case load from file to mem over aiohttp server
* Use cache SpeechManager level, address other comments
* Add service for clear cache
* Update service.yaml
* add support for spliting google message
* Display error message instead of exception
Display error message in log instead of stack trace.
(Usually happens when a server is already running at the same port.)
* Update __init__.py
Better error handling when reading SSL certificate
* Update __init__.py
* Update __init__.py
* Bump python-nest to fix issue with Nest Cam without activity zones
* bump to include fix python-nest dependency with hvac_state
* regenerate requirements_all.txt
* Add media position support and trailer type to Emby
* Adjustments to mitigate TypeError
* Simplify media_position property
* Update handling when data isn't available
* Update emby.py
- Implemented support for covers and dimmable lights.
- Removed global object, use hass.data.
- Disabled polling via update.
- Inherit from common TelldusLiveEntity device.
- Configurable polling interval
- Use https API endpoint
- Use tellduslive package
* Add debug level logging of messages in denon
* Added media stop for Denon AVR Media Player
* Sort source list
* Rework input selection for Denon AVR
This reworks the input selection, adding more modes and making it so
that the media controls are only announced in modes where they actually
makes sense.
* Added real media info for Denon AVR Media modes
* Read more configuration from denon devices
This reads network name, and overrides the local name with that.
This also reads the source names and reconfigures the input list to
those names, and also reads the source deleted list and removes the
inputs that are set to deleted in the device.
* Discover and handle max volume in Denon media player
* Rework source discovery in Denon media player
This uses SSFUN as authorative source for which sources that we should
present.
* Add support for Hue LightGroup entity
* Don't filter on LightGroup and add properties for a group
* Reuse code from HueLight in HueLightGroup
* Remove HueLightGroup and add is_group variable to HueLight
* Make linter happy
* Update light or lightgroup state when a new state is available
* Use schedule_update_ha_state() to schedule the state update. Drop new_lightgroups and use new_lights instead.
* code style fix
* Improving Battery info
Improving battery status info (to reflect NetAtmo API documentation and change deprecated DeviceList for WeatherStationData
* Fixes from previous update
Fix the hound issue.
add battery_lvl, WindAngle_value, GustAngle_value, rf_status_lvl, wifi_status_lvl
* Ecobee autoAway Event
* Update ecobee.py
Checking if event['running'] true is pointless because if false event['type'] will equal template and when true type will only be 'hold' or 'autoAway' so I've removed this check from the statement
* Bump python-nest to fix issue with Nest Cam without activity zones
* bump to include fix python-nest dependency with hvac_state
* regenerate requirements_all.txt
* Prevent emulated hue discovery
Test for “HASS Bridge” in discovery info, pass if found, else try and
setup the bridge.
* Solved coding error
Duplicate commands and return false added for component.
* Pilight: dont protocol as list in COMMAND_SCHEMA
As described in bug #4637 the protocol should not be wrapped in a list
in the spec of COMMAND_SCHEMA because this causes the component to
never successfully match any received rf code.
As pointed ot in PR #4639 the easiest way to do this, is to not derive
COMMAND_SCHEMA from RF_CODE_SCHEMA and specify protocol as simple
string there.
This fixes bug #4637.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Pilight: Add "unitcode" to command schema.
This adds "unitcode" to the COMMAND_SCHEMA. It is used for example in
the brennenstuhl protocol of pilight.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
This adds support for the scene component to handle input_select
devices and set their options.
This fixes bug #4673
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* Add support for telldus in the Docker image. Start with -v /tmp/TelldusClient:/tmp/TelldusClient -v /tmp/TelldusEvents:/tmp/TelldusEvents
* Merged telldus install with the others
* Clean up indenting
* Stream apt-key
* ensure_list
* CONF_ID is not required configuration for enocean lights
* Use vol.All(cv.ensure_list, [vol.Coerce(int)]) as suggested in pull request review
* Fix line too long
* change unifi dependency to pyunifi
* Change dependency to fix#4336
* Run gen_requirements_all.py script
* Changed import statement to reflect new package
* Updated test_unifiy.py with different module
* Update requirements_all.txt
* Add support for Netatmo Welcome Tags
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add size parameter for WelcomeData
* minor fixes
* Add Throttling mechanism for update event
This will prevent to reach the API limit
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Change scan interval for Netatmo Binary sensors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Minor fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update netatmo.py
* Added component for flic smart buttons.
* Apply home-assistant coding styles.
* Fixed flic configuration.
* Made logging for scanning for new buttons less verbose.
* Fixed flic event data.
* Follow async conventions.
* Added new requirements to requirements_all.txt.
* Added flic component to .coveragerc
* Updated flic threshold configuration key names.
* Flic devices are now removed when they disconnect.
* Include review feedback.
* Fixed stopping of clients in flic component when home assistant is stopped.
* Updated flic component by integrating input of #4738.
Use library method to determine click type. Merge three click events into single one with click_type parameter.
* Use a single client for both handling click events and scanning for new buttons.
* Renamed flic ‘auto_scan’ configuration variable to ‘discovery’ using HA constants.
* Add sensor for reading ZAMG weather conditions
* Add to coveragerc; Correct some doc style problems
* More doc fixes
* More doc fixes
* Lose license and whatever.
* Don't return UNKNOWN for unknown variables
* Verify that the configured station id is actually one in the data set.
Don't warn about unknown stations, this cannot happen any more as the configuration parser now checks that.
This could still happen if the data set is incomplete though ...
* Clean up imports
* Clarify comment on throttling interval
* Base zamg sensor on Entity, not WeatherEntity, and delete unused code
* Fix formatting nits from flake8
* Use ATTR_FRIENDLY_NAME, clean up imports, remove unnecessary indirection.
* Use {}.format() instead of "" %
* Re-add unit of measurement that got lost somehow
* Use guard clauses instead of if-matroshka.
Wrap requests.get() in try/except for RequestException.
* Huh, how did this happen? White space corrections...
* Add sensor for reading ZAMG weather conditions
* Add to coveragerc; Correct some doc style problems
* More doc fixes
* More doc fixes
* Verify that the configured station id is actually one in the data set.
Don't warn about unknown stations, this cannot happen any more as the configuration parser now checks that.
This could still happen if the data set is incomplete though ...
* Lose license and whatever.
* Don't return UNKNOWN for unknown variables
* Clean up imports
* Clarify comment on throttling interval
* Base zamg sensor on Entity, not WeatherEntity, and delete unused code
* Fix formatting nits from flake8
* Use ATTR_FRIENDLY_NAME, clean up imports, remove unnecessary indirection.
* Use {}.format() instead of "" %
* Re-add unit of measurement that got lost somehow
* Use guard clauses instead of if-matroshka.
Wrap requests.get() in try/except for RequestException.
* Huh, how did this happen? White space corrections...
* Precipitation actually is a float, good it rained today
* Logger needs no module visibility
* Do not name sensors with _ to be in line with the other weather sensor platforms.
* Remove manually set friendly_name
* comment format police
* Less comments
* Update zamg.py
* ensure_list
* CONF_ID is not required configuration for enocean lights
* Use vol.All(cv.ensure_list, [vol.Coerce(int)]) as suggested in pull request review
* Fix line too long
* initial commit
Previous work included with no history. Sorry, I was figuring out how to use git, branches and deal with open source projects. At this point this is a working switch but with the shortcomings of each of the 8 ports causes a network query. This needs to be rewritten so that the SwitchDevice is part of a larger device group that is only queried once, saving traffic and preventing the small device from timing out.
* Device polls independent of switches now
Used anel_pwrctrl.py as a basis to extract the per-switch polling out to per-device so it can be trottled properly. Likewise, no longer touching the device independently for relay status AND relay name. Getting them both from the same statuslist() return.
* Final comments and tweaks
Lowered cycle and update time since the device update is working so well now. Effectively no timeouts anymore.
* Added dlipower to requirements
homeassistant.components.switch.digitalloggers
* Tox fixes
pydocstyle updates
* More tox errors
* Yet more tox
Removed useful future TODO and helpful details on the structure of the statuslocal list.
Good catch on not initializing .update(), though it worked.
* Blank line fix
* Added file to .coveragerc
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Add source_list to universal media player
* Expanded attirubte and command support for UMP
Added support to the universal media player
for the following:
Volume Set
Current Source
Set Source
Current Volume
The goal is to facilitate a single-card media player
that includes source selection and setting the volume
of the receiver.
Example setup:
```
media_player:
- platform: universal
name: Media Center
children:
- media_player.kodi
- media_player.cast
commands:
select_source:
service: media_player.select_source
data:
entity_id: media_player.receiver
volume_set:
service: media_player.volume_set
data:
entity_id: media_player.receiver
volume_mute:
service: media_player.volume_mute
data:
entity_id: media_player.receiver
turn_on:
service: homeassistant.turn_on
data:
entity_id: media_player.receiver
turn_off:
service: homeassistant.turn_off
data:
entity_id: media_player.receiver
attributes:
state: media_player.receiver
is_volume_muted: media_player.receiver|is_volume_muted
volume_level: media_player.receiver|volume_level
source: media_player.receiver|source
source_list: media_player.receiver|source_list
```
* Remove print statements
* Change service call back to use call_from_config
* Modified service calls to use template data
* linting fixes
* Add tests
* linting fices
* More pylinting
* Add option to hide the group card switch
* Disallow control of hidden group switches
* Revert "Disallow control of hidden group switches"
This reverts commit 75e5ddfe30.
* Changed hide_switch to control
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Fixed attributes that are lists cuasing invalid influx syntax
* Added bool and fixed mixed data type issue
* Fixed changing nearly all data types to float causing some worse influxdb errors. whoops
* Added line to end of file
* Extending efergy component for get the amount of energy consumed
* Changing units from kW to kWh
* Chaning units for Instant Consumption from kWh to kW
* Adding timeout for get and removing pylint config
* Update efergy.py
* Add MAC vendor lookup for device_tracker.
* Test vendor mac lookup and fix device attribute.
* Generate requirements.
* Style.
* Use hyphen instead of underscore to satisfy 'idna'.
https://github.com/kjd/idna/issues/17
* Resort imports.
* Refactor macvendor to use macvendors.com API instead of netaddr library.
* Test vendor lookup using macvendors.com api.
* Remove debugging.
* Correct description.
* No longer needed.
* Device tracker is now an async component. Fix ddwrt tests.
* Fix linting.
* Add test case for error conditions.
* There is no reason to retry failes vendor loopups as they won't be saved to the file anyways at that point.
* Sorry, bad assumption, this only made things worse.
* Wait for async parts during setup component to complete before asserting results.
* Fix linting.
* Is generated when running 'coverage html'.
* Undo isort.
* Make aioclient_mock exception more generic.
* Only lookup mac vendor string with adding new device to known_devices.yaml.
* Undo isort.
* Revert unneeded change.
* Adjust to use new websession pattern.
* Always make sure to cleanup response.
* Use correct function to release response.
* Fix tests.
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* readded after rebase
* cleaning up style errors
* modified .coveragerc
* moved import statements
* added more debug logging
* Added URL encoding of token received from Logitech
* Corrected import for python 3
* new pyharmony version
* new pyharmony version
* remote tests
* only write config file if not present or sync service is called
* more tests
* more tests
* bumped pyharmony version to work with new auth
* bumped pyharmony version to work with new auth
* style corrections
* harmony local auth and remote demo platform
* style fix
* PR refinements and permission issues
* forgot a blank line
* removed sync test from test_init
* removed sync test from test_init
* visual indent
* send_command test in demo platform
If the mpd client ran into an socket timeout, the socket will raise an
OSError on every further request. This adds OSError to the list of
excptions, that causes a client reconnect.
This fixes#4650
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
In media_content_id() the "id" of the current song was returned. as
stated in bug #4652 the id is only the Tracklist-Id in the current
tracklist and is omitted if the track is not part of a tracklist (what
caused the bug in the first place).
To match the semantics described in the dockstring, to return a "Content
ID", this chooses the filename of the current song as id and returns
it.
It also uses get() instead of [] to prevent KeyError.
This fixes bug #4652
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add channel switching for philips tvs.
* Disable track buttons when not watching tv.
* Undo isort config.
* Yes it does.
* Just testing some assumption on hound's flake8 behaviour.
* Revert "Just testing some assumption on hound's flake8 behaviour."
This reverts commit ff9940b39e.
* poke
* Introduced support to Amcrest IP Cameras
* Fixed lint issues
* Fixed requirements test
* * Implemented test to verify crendentials during camera setup
* Added persistent_notification in case of error when during Amcrest setup
* Homematic update with HomematicIP/HomematicWired support and multible connections
* fix bug in virtualkey service
* create new service & cleanups
* fix lint
* Pump pyhomematic 0.1.18
* Default dimmable brightness to 255 from 100
Full brightness for ISY dimmers is 255. The current 100 value turns dimmer switches on to just under half brightness. Probably just an oversight from the Sept implementation.
* Brightness change for turn_on, ramp for turn_off.
Per discussion with Teagan42 and jbcodemonkey, the brightness should rightfully be None and not an explicit value. There is a continuing issue that the ISY modules don't respect HA's brightness customization values. A new issue will be opened for this.
Additionally, turn_off was using ISY's fastoff() which didn't respect the ramping time. The default behavior should just be off().
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Initial implementation of DuneHD media player component based on pdunehd.
* Major: avoid update() in property fetch,
Major: implement source support,
Major: single device per media player instance,
Major: support for volume / mute controls
* Pythonify pdunehd.
Support media_title.
* Fix pylint.
* Further pylint.
* docstring
* Formatting and indentation.
* Change indentation to spaces.
* Update coverage and recorded requirements before PR.
* Further pylint / fake8 / pydocstyle fixes.
* Implement next / prev track,
Properly decode blu-ray playback,
Attempt to decode media title
* Fix play / pause
Linting
* Update requirements.
Fix lint.
* Fix lint and syntax error
* Yet more linting.
* Yet more linting.
* Fix lint: line too long.
* Force update of HA state.
Fixes https://github.com/home-assistant/home-assistant/issues/4389
The USB address of these devices periodically changes, causing
home-assistant to fail to read the temperature data. This PR fixes this
by re-reading the available devices on failure. I've been running this
for several days and for the first time have consistent temperature
data without having to restart home-assistant.
* Add exception handling to request call to prevent
failure in setup_platform if host is down
* update for comments
* update test for state being none
* remove unused import
* Added support for media_position property to media_player + implementation for sonos.
* Pla yback progress now updates without needed state transitions in HA.
* Linting fixes
* media_position_update_at property is now a datetime.
* Minor fix.
* Linting fixes.
* Add support for light effects
* Move PLATFORM_SCHEMA changes in light to mqtt_template
* Add effect validation
* Add unittests
* Add light effect to demo and unittests
* Use cv.string for config validation
* Use cv.ensure_list for config validation
* Fix typo
* Remove unused exception management for effect
* start nestcam support
* start nestcam support
* introduce a access_token_cache_file
* Bare minimum to get nest thermostat loading
* occaisonally the image works
* switch to nest-aware interval for testing
* Add Nest Aware awareness
* remove duplicate error logging line
* Fix nest protect support
* address baloobot
* fix copy pasta
* fix more baloobot
* last baloobot thing for now?
* Use streaming status to determine online or not. online from nest means its on the network
* Fix temperature scale for climate
* Add support for eco mode
* Fix auto mode for nest climate
* update update current_operation and set_operation mode to use constant when possible. try to get setting something working
* remove stale comment
* unused-argument already disabled globally
* Add eco to the end, instead of after off
* Simplify conditional when the hass mode is the same as the nest one
* away_temperature became eco_temperature, and works with eco mode
* Update min/max temp based on locked temperature
* Forgot to set locked stuff during construction
* Cache image instead of throttling (which returns none), respect NestAware subscription
* Fix _time_between_snapshots before the first update
* WIP pin authorization
* Add some more logging
* Working configurator, woo. Fix some hound errors
* Updated pin workflow
* Deprecate more sensors
* Don't update during access of name
* Don't update during access of name
* Add camera brand
* Fix up some syntastic errors
* Fix ups ome hound errors
* Maybe fix some more?
* Move snapshot simulator url checking down into python-nest
* Rename _ready_to_update_camera_image to _ready_for_snapshot
* More fixes
* Set the next time a snapshot can be taken when one is taken to simplify logic
* Add a FIXME about update not getting called
* Call update during constructor, so values get set at least once
* Fix up names
* Remove todo about eco, since that's pretty nest
* thanks hound
* Fix temperature being off for farenheight.
* Fix some lint errors, which includes using a git version of python-nest with updated code
* generate requirements_all.py
* fix pylint
* Update nestcam before adding
* Fix polling of NestCamera
* Lint
* Expose isort preferences for tools.
* Adhere to pylints sorted imports requirement.
* More documentation, set typing in between stdlib and 3rd party.
This lets components declare their precision for temperatures. If
nothing is declared, we assume 0.1 C and whole integer precision in
F. Currently this supports only WHOLE, HALVES, and TENTHS for
precision, but adding other precision levels is pretty straight
forward.
This also uses proliphix as an example of changing the precision for a
platform.
Closes bug #4350
* Remove fixed throttle for binary_sensor.command_line and sensor.command_line since the scan_interval is configured trough YAML since #1059
* Clean up imports
* Add SCAN_INTERVAL=60 to put default scan_inteval back to 60
* Add websocket API
* Add identifiers to interactions
* Allow unsubscribing event listeners
* Add support for fetching data
* Clean up handling code websockets api
* Lint
* Add Home Assistant version to auth messages
* Py.test be less verbose in tox
* Move HTTP to own folder
* Break HTTP into middlewares
* Lint
* Split tests per middleware
* Clean up HTTP tests
* Make HomeAssistantViews more stateless
* Lint
* Make HTTP setup async
* #4421 - Forced icons to be displayed via SSL to avoid Mixed Content warnings
* Fixed houndci-bot whitespace
* Using regex to replace http:// for https://
* Created assert test to verify https translation
* LiteJet: Unit tests and new trigger options held_more_than and held_less_than.
* Unit tests for the LiteJet component and associated platforms. Coverage is almost 100% -- just misses one line.
* The automation LiteJet trigger returns an empty "removal" function to ensure the automation base is happy with it. The pylitejet library doesn't actually support a real removal.
* The automation LiteJet trigger can detect hold time and act appropriately to support things like short tap or long hold.
* LiteJet: Fix indent in unit test source code.
* LiteJet: Fix test_include_switches_* unit tests on Python 3.5
* LiteJet: Remove wait for state existence from unit tests. Recent fixes to discovery make this no longer necessary.
* Removed raise statement to don't polute the user log.
Only the error message should be displayed.
Nov 22 11:28:32 tchellopi hass[20138]: 16-11-22 11:28:32 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved
Nov 22 11:28:32 tchellopi hass[20138]: Traceback (most recent call last):
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/tasks.py", line 241, in _step
Nov 22 11:28:32 tchellopi hass[20138]: result = coro.throw(exc)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 386, in _update_entity_states
Nov 22 11:28:32 tchellopi hass[20138]: yield from update_coro
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity.py", line 213, in async_update_ha_state
Nov 22 11:28:32 tchellopi hass[20138]: yield from self.hass.loop.run_in_executor(None, self.update)
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
Nov 22 11:28:32 tchellopi hass[20138]: yield self # This tells Task to wait for completion.
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
Nov 22 11:28:32 tchellopi hass[20138]: future.result()
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
Nov 22 11:28:32 tchellopi hass[20138]: raise self._exception
Nov 22 11:28:32 tchellopi hass[20138]: File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
Nov 22 11:28:32 tchellopi hass[20138]: result = self.fn(*self.args, **self.kwargs)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.homeassistant/custom_components/sensor/wunderground.py", line 187, in update
Nov 22 11:28:32 tchellopi hass[20138]: self.rest.update()
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/util/__init__.py", line 296, in wrapper
Nov 22 11:28:32 tchellopi hass[20138]: result = method(*args, **kwargs)
Nov 22 11:28:32 tchellopi hass[20138]: File "/home/hass/.homeassistant/custom_components/sensor/wunderground.py", line 222, in update
Nov 22 11:28:32 tchellopi hass[20138]: ["description"])
Nov 22 11:28:32 tchellopi hass[20138]: ValueError: you must supply a key
* Updated unittest since we are just printing the error instead raising
* Initial implemenation of DSMR component.
* Fix linting
* Remove protocol V2.2 support until merged upstream.
* Generate requirements using script.
* Use updated dsmr-parser with protocol 2.2 support.
* Add tests.
* Isort and input validation.
* Add entities for gas and actual meter reading. Error handling. Use Throttle.
* Implement non-blocking serial reader.
* Improve logging.
* Merge entities into one, add icons, fix tests for asyncio.
* Add error logging for serial reader.
* Refactoring and documentation.
- refactor asyncio reader task to make sure it stops with HA
- document general principle of this component
- refactor entity reading to be more clear
- remove cruft from split entity implementation
* Use `port` configuration key.
* DSMR V2.2 seems to conflict in explaining which tariff is high and low.
http://www.netbeheernederland.nl/themas/hotspot/hotspot-documenten/?dossierid=11010056&title=Slimme%20meter&onderdeel=Documenten
> DSMR v2.2 Final P1
>> 6.1: table vs table note
Meter Reading electricity delivered to client normal tariff) in 0,01 kWh - 1-0:1.8.1.255
Meter Reading electricity delivered to client (low tariff) in 0,01 kWh - 1-0:1.8.2.255
Note: Tariff code 1 is used for low tariff and tariff code 2 is used for normal tariff.
* Refactor to use asyncio.Protocol instead of loop+queue.
* Fix requirements
* Close transport when HA stops.
* Cleanup.
* Include as dependency for testing (until merged upstream.)
* Fix style.
* Update setup.cfg
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Fix lint: single argument for .exception and no more pass statement.
* Further lint fixes.
* pydocstyle fix
* Implement rate throttle.
Data on WAQI is usually updated once an hour - make it refresh every thirty minutes.
* Implement schema validation with voluptuous.
Change exception handling scope.
Move messages to debug().
* Fix lint (empty indented line).
* Sort lines correctly.
* Fix last lint issue.
* Provide additional sensor data as received from WAQI.
Easier-to-read throttle timing.
* Additional object attributes to be unrolled later.
* Add sonarr sensor and tests for sensor
* Fixed some linting errors and removed unused import
* Add SSL option for those who use SSL from within Sonarr
* Add requirements to all requirements, and sensor to coveragerc
* remove unused variable
* move methods to functions, and other lint fixes
* linting fixes
* linting is clean now
* Remove double requirement
* fix linting for docstrings, this should probably be a part of the script/lint and not just travis
* used MindrustUK's version ( https://github.com/MindrustUK/python-lightify/commits/master/osramlightify.py ) from Oct 2, 2016 and changed the REQUIRMENTS line to use the fixed lightify component with thread safety fixes
* reformatted long lines
* updated osramlightify requirements in requirements_all.txt
* ran script gen_requirements_all.py
* rerun requirements gen script on linux
* fixed some inspection warnings
* zip file points to a specific commit
* no requests to lights in properties, instead instance variables are update in update method
* regenerated requirements_all.txt
* removed call to update from is_on() property
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Climate: more consistent units
* Prevent unnecessary conversion in entity component
* int -> round
* Disable Google tests because they connect to the internet
* Remove default conversion rounding F->C
* Add rounding of temp to weather comp
* Fix equality
* Maintain precision when converting temp in entity
* Revert "Disable Google tests because they connect to the internet"
This reverts commit b60485dc19.
* new config parameter to specify number of digits for rounding average value
* fixed two `line too long` errors
* added three new tests for the mean sensor including test for precision of mean value
* Added source selection for Denon AVR Media Player
* Update denon.py
* Update denon.py
* Update denon.py
* Update denon.py
* Update denon.py
slight format update (space issue and new line)
* Further update regarding formatting
* Updated the source name with lowercase
* Update denon.py
pyvera 0.2.21 fixes the fact that use of requests.get was not using a
timeout. Some times (after a few days of use) the pyvera poll loop
would hang indefinitely on a requests.get of the event interface. This
would cause the pyvera thread to hang completely. It would also
prevent graceful shutdown, as pyvera does a thread join.
The new version uses a timeout, so that we won't lock up any more.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io) with documentation (if applicable):** home-assistant/home-assistant.github.io#<home-assistant.github.io PR number goes here>
**Example entry for `configuration.yaml` (if applicable):**
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
**Checklist:**
## Checklist:
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
@@ -26,5 +26,5 @@ If the code does not interact with devices:
- [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
- [ ] Tests have been added to verify that the new code works.
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the Apache 2.0 license; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the Apache 2.0 license; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it) is maintained indefinitely
and may be redistributed consistent with this project or the open
source license(s) involved.
```
## Attribution
The text of this license is available under the [Creative Commons Attribution-ShareAlike 3.0 Unported License](http://creativecommons.org/licenses/by-sa/3.0/). It is based on the Linux [Developer Certificate Of Origin](http://elinux.org/Developer_Certificate_Of_Origin), but is modified to explicitly use the Apache 2.0 license
and not mention sign-off.
## Signing
To sign this CLA you must first submit a pull request to a repository under the Home Assistant organization.
## Adoption
This Contributor License Agreement (CLA) was first announced on January 21st, 2017 in [this][cla-blog] blog post and adopted January 28th, 2017.
Everybody is invited and welcome to contribute to Home Assistant. There is a lot to do...if you are not a developer perhaps you would like to help with the documentation on [home-assistant.io](https://home-assistant.io/)? If you are a developer and have devices in your home which aren't working with Home Assistant yet, why not spent a couple of hours and help to integrate them?
Everybody is invited and welcome to contribute to Home Assistant. There is a lot to do...if you are not a developer perhaps you would like to help with the documentation on [home-assistant.io](https://home-assistant.io/)? If you are a developer and have devices in your home which aren't working with Home Assistant yet, why not spent a couple of hours and help to integrate them?
The process is straight-forward.
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/devel/faster_reviews.md) by Kubernetes (but skip step 0)
- Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
- Write the code for your device, notification service, sensor, or IoT thing.
- Ensure tests work.
- Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details.
Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
